diff options
Diffstat (limited to 'include/linux')
38 files changed, 813 insertions, 381 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index a2df7030d49..03f22076381 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -308,6 +308,7 @@ unifdef-y += pmu.h unifdef-y += poll.h unifdef-y += ppp_defs.h unifdef-y += ppp-comp.h +unifdef-y += pps.h unifdef-y += ptrace.h unifdef-y += quota.h unifdef-y += random.h diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h new file mode 100644 index 00000000000..b4fbd986260 --- /dev/null +++ b/include/linux/amba/pl061.h @@ -0,0 +1,15 @@ +/* platform data for the PL061 GPIO driver */ + +struct pl061_platform_data { + /* number of the first GPIO */ + unsigned gpio_base; + + /* number of the first IRQ. + * If the IRQ functionality in not desired this must be set to + * (unsigned) -1. + */ + unsigned irq_base; + + u8 directions; /* startup directions, 1: out, 0: in */ + u8 values; /* startup values */ +}; diff --git a/include/linux/ata.h b/include/linux/ata.h index 915da43edee..9c75921f0c1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -800,6 +800,20 @@ static inline int ata_id_is_ssd(const u16 *id) return id[ATA_ID_ROT_SPEED] == 0x01; } +static inline int ata_id_pio_need_iordy(const u16 *id, const u8 pio) +{ + /* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */ + if (pio > 4 && ata_id_is_cfa(id)) + return 0; + /* For PIO3 and higher it is mandatory. */ + if (pio > 2) + return 1; + /* Turn it on when possible. */ + if (ata_id_has_iordy(id)) + return 1; + return 0; +} + static inline int ata_drive_40wire(const u16 *dev_id) { if (ata_id_is_sata(dev_id)) diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h index 8005effc04f..b721129e046 100644 --- a/include/linux/compiler-gcc3.h +++ b/include/linux/compiler-gcc3.h @@ -16,6 +16,12 @@ #define __must_check __attribute__((warn_unused_result)) #endif +#ifdef CONFIG_GCOV_KERNEL +# if __GNUC_MINOR__ < 4 +# error "GCOV profiling support for gcc versions below 3.4 not included" +# endif /* __GNUC_MINOR__ */ +#endif /* CONFIG_GCOV_KERNEL */ + /* * A trick to suppress uninitialized variable warning without generating any * code diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 8083b6a36a3..07dfd460d28 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -63,24 +63,26 @@ struct dma_map_ops { #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) +typedef u64 DMA_nnBIT_MASK __deprecated; + /* * NOTE: do not use the below macros in new code and do not add new definitions * here. * * Instead, just open-code DMA_BIT_MASK(n) within your driver */ -#define DMA_64BIT_MASK DMA_BIT_MASK(64) -#define DMA_48BIT_MASK DMA_BIT_MASK(48) -#define DMA_47BIT_MASK DMA_BIT_MASK(47) -#define DMA_40BIT_MASK DMA_BIT_MASK(40) -#define DMA_39BIT_MASK DMA_BIT_MASK(39) -#define DMA_35BIT_MASK DMA_BIT_MASK(35) -#define DMA_32BIT_MASK DMA_BIT_MASK(32) -#define DMA_31BIT_MASK DMA_BIT_MASK(31) -#define DMA_30BIT_MASK DMA_BIT_MASK(30) -#define DMA_29BIT_MASK DMA_BIT_MASK(29) -#define DMA_28BIT_MASK DMA_BIT_MASK(28) -#define DMA_24BIT_MASK DMA_BIT_MASK(24) +#define DMA_64BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(64) +#define DMA_48BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(48) +#define DMA_47BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(47) +#define DMA_40BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(40) +#define DMA_39BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(39) +#define DMA_35BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(35) +#define DMA_32BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(32) +#define DMA_31BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(31) +#define DMA_30BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(30) +#define DMA_29BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(29) +#define DMA_28BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(28) +#define DMA_24BIT_MASK (DMA_nnBIT_MASK)DMA_BIT_MASK(24) #define DMA_MASK_NONE 0x0ULL @@ -107,9 +109,20 @@ static inline int is_buffer_dma_capable(u64 mask, dma_addr_t addr, size_t size) #include <asm-generic/dma-mapping-broken.h> #endif -/* Backwards compat, remove in 2.7.x */ -#define dma_sync_single dma_sync_single_for_cpu -#define dma_sync_sg dma_sync_sg_for_cpu +/* for backwards compatibility, removed soon */ +static inline void __deprecated dma_sync_single(struct device *dev, + dma_addr_t addr, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_for_cpu(dev, addr, size, dir); +} + +static inline void __deprecated dma_sync_sg(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg_for_cpu(dev, sg, nelems, dir); +} static inline u64 dma_get_mask(struct device *dev) { diff --git a/include/linux/efi.h b/include/linux/efi.h index bb66feb164b..ce4581fbc08 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -101,7 +101,7 @@ typedef struct { u64 attribute; } efi_memory_desc_t; -typedef int (*efi_freemem_callback_t) (unsigned long start, unsigned long end, void *arg); +typedef int (*efi_freemem_callback_t) (u64 start, u64 end, void *arg); /* * Types and defines for Time Services diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 244677cc082..43fc95d822d 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -79,10 +79,6 @@ struct fsl_spi_platform_data { u16 max_chipselect; void (*cs_control)(struct spi_device *spi, bool on); u32 sysclk; - - /* Legacy hooks, used by mpc52xx_psc_spi driver. */ - void (*activate_cs)(u8 cs, u8 polarity); - void (*deactivate_cs)(u8 cs, u8 polarity); }; struct mpc8xx_pcmcia_ops { diff --git a/include/linux/gcd.h b/include/linux/gcd.h new file mode 100644 index 00000000000..69f5e8a01ba --- /dev/null +++ b/include/linux/gcd.h @@ -0,0 +1,8 @@ +#ifndef _GCD_H +#define _GCD_H + +#include <linux/compiler.h> + +unsigned long gcd(unsigned long a, unsigned long b) __attribute_const__; + +#endif /* _GCD_H */ diff --git a/include/linux/gfp.h b/include/linux/gfp.h index cfdb35d71bc..7c777a0da17 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -99,7 +99,7 @@ struct vm_area_struct; __GFP_NORETRY|__GFP_NOMEMALLOC) /* Control slab gfp mask during early boot */ -#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS) +#define GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS) /* Control allocation constraints */ #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE) @@ -348,4 +348,11 @@ static inline void oom_killer_enable(void) oom_killer_disabled = false; } +extern gfp_t gfp_allowed_mask; + +static inline void set_gfp_allowed_mask(gfp_t mask) +{ + gfp_allowed_mask = mask; +} + #endif /* __LINUX_GFP_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ad258059603..f4784c0fe97 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -47,6 +47,7 @@ struct i2c_driver; union i2c_smbus_data; struct i2c_board_info; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * The master routines are the ones normally used to transmit data to devices * on a bus (or read from them). Apart from two basic transfer functions to @@ -93,6 +94,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values); +#endif /* I2C */ /** * struct i2c_driver - represent an I2C device driver @@ -100,9 +102,8 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, * @class: What kind of i2c device we instantiate (for detect) * @attach_adapter: Callback for bus addition (for legacy drivers) * @detach_adapter: Callback for bus removal (for legacy drivers) - * @detach_client: Callback for device removal (for legacy drivers) - * @probe: Callback for device binding (new-style drivers) - * @remove: Callback for device unbinding (new-style drivers) + * @probe: Callback for device binding + * @remove: Callback for device unbinding * @shutdown: Callback for device shutdown * @suspend: Callback for device suspend * @resume: Callback for device resume @@ -137,26 +138,14 @@ struct i2c_driver { int id; unsigned int class; - /* Notifies the driver that a new bus has appeared. This routine - * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it - * registers the client(s) that are on the bus to the i2c admin. via - * i2c_attach_client. (LEGACY I2C DRIVERS ONLY) + /* Notifies the driver that a new bus has appeared or is about to be + * removed. You should avoid using this if you can, it will probably + * be removed in a near future. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it - * the chance to remove its private data. Also, if the client struct - * has been dynamically allocated by the driver in the function above, - * it must be freed here. (LEGACY I2C DRIVERS ONLY) - */ - int (*detach_client)(struct i2c_client *) __deprecated; - - /* Standard driver model interfaces, for "new style" i2c drivers. - * With the driver model, device enumeration is NEVER done by drivers; - * it's done by infrastructure. (NEW STYLE DRIVERS ONLY) - */ + /* Standard driver model interfaces */ int (*probe)(struct i2c_client *, const struct i2c_device_id *); int (*remove)(struct i2c_client *); @@ -191,9 +180,8 @@ struct i2c_driver { * @driver: device's driver, hence pointer to access routines * @dev: Driver model device node for the slave. * @irq: indicates the IRQ generated by this device (if any) - * @list: list of active/busy clients (DEPRECATED) - * @detected: member of an i2c_driver.clients list - * @released: used to synchronize client releases & detaches and references + * @detected: member of an i2c_driver.clients list or i2c-core's + * userspace_devices list * * An i2c_client identifies a single device (i.e. chip) connected to an * i2c bus. The behaviour exposed to Linux is defined by the driver @@ -209,9 +197,7 @@ struct i2c_client { struct i2c_driver *driver; /* and our access routines */ struct device dev; /* the device structure */ int irq; /* irq issued by device */ - struct list_head list; /* DEPRECATED */ struct list_head detected; - struct completion released; }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) @@ -248,11 +234,10 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) * that, such as chip type, configuration, associated IRQ, and so on. * * i2c_board_info is used to build tables of information listing I2C devices - * that are present. This information is used to grow the driver model tree - * for "new style" I2C drivers. For mainboards this is done statically using - * i2c_register_board_info(); bus numbers identify adapters that aren't - * yet available. For add-on boards, i2c_new_device() does this dynamically - * with the adapter already known. + * that are present. This information is used to grow the driver model tree. + * For mainboards this is done statically using i2c_register_board_info(); + * bus numbers identify adapters that aren't yet available. For add-on boards, + * i2c_new_device() does this dynamically with the adapter already known. */ struct i2c_board_info { char type[I2C_NAME_SIZE]; @@ -277,6 +262,7 @@ struct i2c_board_info { .type = dev_type, .addr = (dev_addr) +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* Add-on boards should register/unregister their devices; e.g. a board * with integrated I2C, a config eeprom, sensors, and a codec that's * used in conjunction with the primary hardware. @@ -300,6 +286,7 @@ extern struct i2c_client * i2c_new_dummy(struct i2c_adapter *adap, u16 address); extern void i2c_unregister_device(struct i2c_client *); +#endif /* I2C */ /* Mainboard arch_initcall() code should register all its I2C devices. * This is done at arch_initcall time, before declaring any i2c adapters. @@ -316,7 +303,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info, { return 0; } -#endif +#endif /* I2C_BOARDINFO */ /* * The following structs are for those who like to implement new bus drivers: @@ -352,21 +339,15 @@ struct i2c_adapter { const struct i2c_algorithm *algo; /* the algorithm to access the bus */ void *algo_data; - /* --- administration stuff. */ - int (*client_register)(struct i2c_client *) __deprecated; - int (*client_unregister)(struct i2c_client *) __deprecated; - /* data fields that are valid for all devices */ u8 level; /* nesting level for lockdep */ struct mutex bus_lock; - struct mutex clist_lock; int timeout; /* in jiffies */ int retries; struct device dev; /* the adapter device */ int nr; - struct list_head clients; /* DEPRECATED */ char name[48]; struct completion dev_released; }; @@ -412,11 +393,16 @@ struct i2c_client_address_data { /* The numbers to use to set I2C bus address */ #define ANY_I2C_BUS 0xffff +/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ +#define I2C_ADDRS(addr, addrs...) \ + ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) + /* ----- functions exported by i2c.o */ /* administration... */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) extern int i2c_add_adapter(struct i2c_adapter *); extern int i2c_del_adapter(struct i2c_adapter *); extern int i2c_add_numbered_adapter(struct i2c_adapter *); @@ -429,11 +415,6 @@ static inline int i2c_add_driver(struct i2c_driver *driver) return i2c_register_driver(THIS_MODULE, driver); } -/* These are deprecated, your driver should use the standard .probe() - * and .remove() methods instead. */ -extern int __deprecated i2c_attach_client(struct i2c_client *); -extern int __deprecated i2c_detach_client(struct i2c_client *); - extern struct i2c_client *i2c_use_client(struct i2c_client *client); extern void i2c_release_client(struct i2c_client *client); @@ -442,14 +423,6 @@ extern void i2c_release_client(struct i2c_client *client); extern void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg); -/* Detect function. It iterates over all possible addresses itself. - * It will only call found_proc if some client is connected at the - * specific address (unless a 'force' matched); - */ -extern int i2c_probe(struct i2c_adapter *adapter, - const struct i2c_client_address_data *address_data, - int (*found_proc) (struct i2c_adapter *, int, int)); - extern struct i2c_adapter *i2c_get_adapter(int id); extern void i2c_put_adapter(struct i2c_adapter *adap); @@ -471,6 +444,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) { return adap->nr; } +#endif /* I2C */ #endif /* __KERNEL__ */ /** diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h index 3c7361217df..81736d6a8db 100644 --- a/include/linux/i2c/pca953x.h +++ b/include/linux/i2c/pca953x.h @@ -15,4 +15,5 @@ struct pca953x_platform_data { int (*teardown)(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context); + char **names; }; diff --git a/include/linux/ide.h b/include/linux/ide.h index a6c6a2fad7c..95c6e00a72e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -157,12 +157,6 @@ enum { #define REQ_UNPARK_HEADS 0x23 /* - * Check for an interrupt and acknowledge the interrupt status - */ -struct hwif_s; -typedef int (ide_ack_intr_t)(struct hwif_s *); - -/* * hwif_chipset_t is used to keep track of the specific hardware * chipset used by each IDE interface, if known. */ @@ -185,7 +179,6 @@ struct ide_hw { }; int irq; /* our irq number */ - ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ struct device *dev, *parent; unsigned long config; }; @@ -331,11 +324,6 @@ enum { PC_FLAG_WRITING = (1 << 6), }; -/* - * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes. - * This is used for several packet commands (not for READ/WRITE commands). - */ -#define IDE_PC_BUFFER_SIZE 64 #define ATAPI_WAIT_PC (60 * HZ) struct ide_atapi_pc { @@ -347,12 +335,6 @@ struct ide_atapi_pc { /* bytes to transfer */ int req_xfer; - /* bytes actually transferred */ - int xferred; - - /* data buffer */ - u8 *buf; - int buf_size; /* the corresponding request */ struct request *rq; @@ -363,8 +345,6 @@ struct ide_atapi_pc { * those are more or less driver-specific and some of them are subject * to change/removal later. */ - u8 pc_buf[IDE_PC_BUFFER_SIZE]; - unsigned long timeout; }; @@ -552,7 +532,7 @@ struct ide_drive_s { unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */ unsigned int cyl; /* "real" number of cyls */ - unsigned int drive_data; /* used by set_pio_mode/dev_select() */ + void *drive_data; /* used by set_pio_mode/dev_select() */ unsigned int failures; /* current failure count */ unsigned int max_failures; /* maximum allowed failure count */ u64 probed_capacity;/* initial/native media capacity */ @@ -649,6 +629,7 @@ struct ide_port_ops { void (*maskproc)(ide_drive_t *, int); void (*quirkproc)(ide_drive_t *); void (*clear_irq)(ide_drive_t *); + int (*test_irq)(struct hwif_s *); u8 (*mdma_filter)(ide_drive_t *); u8 (*udma_filter)(ide_drive_t *); @@ -674,6 +655,10 @@ struct ide_dma_ops { u8 (*dma_sff_read_status)(struct hwif_s *); }; +enum { + IDE_PFLAG_PROBING = (1 << 0), +}; + struct ide_host; typedef struct hwif_s { @@ -690,6 +675,8 @@ typedef struct hwif_s { ide_drive_t *devices[MAX_DRIVES + 1]; + unsigned long port_flags; + u8 major; /* our major number */ u8 index; /* 0 for ide0; 1 for ide1; ... */ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */ @@ -708,8 +695,6 @@ typedef struct hwif_s { struct device *dev; - ide_ack_intr_t *ack_intr; - void (*rw_disk)(ide_drive_t *, struct request *); const struct ide_tp_ops *tp_ops; @@ -1130,6 +1115,8 @@ void SELECT_MASK(ide_drive_t *, int); u8 ide_read_error(ide_drive_t *); void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *); +int ide_check_ireason(ide_drive_t *, struct request *, int, int, int); + int ide_check_atapi_device(ide_drive_t *, const char *); void ide_init_pc(struct ide_atapi_pc *); @@ -1154,7 +1141,8 @@ enum { REQ_IDETAPE_WRITE = (1 << 3), }; -int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *); +int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *, + void *, unsigned int); int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); @@ -1524,6 +1512,7 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); int ide_scan_pio_blacklist(char *); const char *ide_xfer_verbose(u8); u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); +int ide_pio_need_iordy(ide_drive_t *, const u8); int ide_set_pio_mode(ide_drive_t *, u8); int ide_set_dma_mode(ide_drive_t *, u8); void ide_set_pio(ide_drive_t *, u8); @@ -1561,6 +1550,16 @@ static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive) return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL; } +static inline void *ide_get_drivedata(ide_drive_t *drive) +{ + return drive->drive_data; +} + +static inline void ide_set_drivedata(ide_drive_t *drive, void *data) +{ + drive->drive_data = data; +} + #define ide_port_for_each_dev(i, dev, port) \ for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) diff --git a/include/linux/init.h b/include/linux/init.h index 8c2c9989626..13b633ed695 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -134,6 +134,9 @@ typedef void (*exitcall_t)(void); extern initcall_t __con_initcall_start[], __con_initcall_end[]; extern initcall_t __security_initcall_start[], __security_initcall_end[]; +/* Used for contructor calls. */ +typedef void (*ctor_fn_t)(void); + /* Defined in init/main.c */ extern int do_one_initcall(initcall_t fn); extern char __initdata boot_command_line[]; diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index 3bf40e246a8..e408722a84c 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -94,13 +94,8 @@ static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; } #endif #if defined(CONFIG_IPC_NS) -extern void free_ipc_ns(struct ipc_namespace *ns); extern struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns); -extern void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids, - void (*free)(struct ipc_namespace *, - struct kern_ipc_perm *)); - static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) { if (ns) diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index cc02393bfce..d97eb652d6c 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1315,6 +1315,12 @@ extern int jbd_blocks_per_page(struct inode *inode); #define BUFFER_TRACE2(bh, bh2, info) do {} while (0) #define JBUFFER_TRACE(jh, info) do {} while (0) +/* + * jbd2_dev_to_name is a utility function used by the jbd2 and ext4 + * tracing infrastructure to map a dev_t to a device name. + */ +extern const char *jbd2_dev_to_name(dev_t device); + #endif /* __KERNEL__ */ #endif /* _LINUX_JBD2_H */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index c5a71c38a95..fac104e7186 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -58,7 +58,7 @@ extern const char linux_proc_banner[]; #define _RET_IP_ (unsigned long)__builtin_return_address(0) #define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) -#ifdef CONFIG_LBD +#ifdef CONFIG_LBDAF # include <asm/div64.h> # define sector_div(a, b) do_div(a, b) #else diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index a77c6007dc9..348fa8874b5 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -5,6 +5,7 @@ #include <linux/threads.h> #include <linux/percpu.h> #include <linux/cpumask.h> +#include <linux/interrupt.h> #include <asm/irq.h> #include <asm/cputime.h> @@ -31,6 +32,7 @@ struct kernel_stat { #ifndef CONFIG_GENERIC_HARDIRQS unsigned int irqs[NR_IRQS]; #endif + unsigned int softirqs[NR_SOFTIRQS]; }; DECLARE_PER_CPU(struct kernel_stat, kstat); @@ -67,6 +69,16 @@ extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu); #endif +static inline void kstat_incr_softirqs_this_cpu(unsigned int irq) +{ + kstat_this_cpu.softirqs[irq]++; +} + +static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu) +{ + return kstat_cpu(cpu).softirqs[irq]; +} + /* * Number of interrupts per specific IRQ source, since bootup */ diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 45add35dda1..e46a0734ab6 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -117,7 +117,7 @@ static inline bool mem_cgroup_disabled(void) } extern bool mem_cgroup_oom_called(struct task_struct *task); - +void mem_cgroup_update_mapped_file_stat(struct page *page, int val); #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct mem_cgroup; @@ -271,6 +271,11 @@ mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p) { } +static inline void mem_cgroup_update_mapped_file_stat(struct page *page, + int val) +{ +} + #endif /* CONFIG_CGROUP_MEM_CONT */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h new file mode 100644 index 00000000000..7a3f316e384 --- /dev/null +++ b/include/linux/mfd/ab3100.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * AB3100 core access functions + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/device.h> + +#ifndef MFD_AB3100_H +#define MFD_AB3100_H + +#define ABUNKNOWN 0 +#define AB3000 1 +#define AB3100 2 + +/* + * AB3100, EVENTA1, A2 and A3 event register flags + * these are catenated into a single 32-bit flag in the code + * for event notification broadcasts. + */ +#define AB3100_EVENTA1_ONSWA (0x01<<16) +#define AB3100_EVENTA1_ONSWB (0x02<<16) +#define AB3100_EVENTA1_ONSWC (0x04<<16) +#define AB3100_EVENTA1_DCIO (0x08<<16) +#define AB3100_EVENTA1_OVER_TEMP (0x10<<16) +#define AB3100_EVENTA1_SIM_OFF (0x20<<16) +#define AB3100_EVENTA1_VBUS (0x40<<16) +#define AB3100_EVENTA1_VSET_USB (0x80<<16) + +#define AB3100_EVENTA2_READY_TX (0x01<<8) +#define AB3100_EVENTA2_READY_RX (0x02<<8) +#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8) +#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8) +#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8) +#define AB3100_EVENTA2_MIDR (0x20<<8) +#define AB3100_EVENTA2_BATTERY_REM (0x40<<8) +#define AB3100_EVENTA2_ALARM (0x80<<8) + +#define AB3100_EVENTA3_ADC_TRIG5 (0x01) +#define AB3100_EVENTA3_ADC_TRIG4 (0x02) +#define AB3100_EVENTA3_ADC_TRIG3 (0x04) +#define AB3100_EVENTA3_ADC_TRIG2 (0x08) +#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10) +#define AB3100_EVENTA3_ADC_TRIGVTX (0x20) +#define AB3100_EVENTA3_ADC_TRIG1 (0x40) +#define AB3100_EVENTA3_ADC_TRIG0 (0x80) + +/* AB3100, STR register flags */ +#define AB3100_STR_ONSWA (0x01) +#define AB3100_STR_ONSWB (0x02) +#define AB3100_STR_ONSWC (0x04) +#define AB3100_STR_DCIO (0x08) +#define AB3100_STR_BOOT_MODE (0x10) +#define AB3100_STR_SIM_OFF (0x20) +#define AB3100_STR_BATT_REMOVAL (0x40) +#define AB3100_STR_VBUS (0x80) + +/** + * struct ab3100 + * @access_mutex: lock out concurrent accesses to the AB3100 registers + * @dev: pointer to the containing device + * @i2c_client: I2C client for this chip + * @testreg_client: secondary client for test registers + * @chip_name: name of this chip variant + * @chip_id: 8 bit chip ID for this chip variant + * @work: an event handling worker + * @event_subscribers: event subscribers are listed here + * @startup_events: a copy of the first reading of the event registers + * @startup_events_read: whether the first events have been read + * + * This struct is PRIVATE and devices using it should NOT + * access ANY fields. It is used as a token for calling the + * AB3100 functions. + */ +struct ab3100 { + struct mutex access_mutex; + struct device *dev; + struct i2c_client *i2c_client; + struct i2c_client *testreg_client; + char chip_name[32]; + u8 chip_id; + struct work_struct work; + struct blocking_notifier_head event_subscribers; + u32 startup_events; + bool startup_events_read; +}; + +int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval); +int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval); +int ab3100_get_register_page(struct ab3100 *ab3100, + u8 first_reg, u8 *regvals, u8 numregs); +int ab3100_mask_and_set_register(struct ab3100 *ab3100, + u8 reg, u8 andmask, u8 ormask); +u8 ab3100_get_chip_type(struct ab3100 *ab3100); +int ab3100_event_register(struct ab3100 *ab3100, + struct notifier_block *nb); +int ab3100_event_unregister(struct ab3100 *ab3100, + struct notifier_block *nb); +int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100, + u32 *fatevent); + +#endif diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h index 322cd6deb9f..de3c4ad19af 100644 --- a/include/linux/mfd/asic3.h +++ b/include/linux/mfd/asic3.h @@ -30,6 +30,13 @@ struct asic3_platform_data { #define ASIC3_NUM_GPIOS 64 #define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6 +#define ASIC3_IRQ_LED0 64 +#define ASIC3_IRQ_LED1 65 +#define ASIC3_IRQ_LED2 66 +#define ASIC3_IRQ_SPI 67 +#define ASIC3_IRQ_SMBUS 68 +#define ASIC3_IRQ_OWM 69 + #define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio)) #define ASIC3_GPIO_BANK_A 0 @@ -227,8 +234,8 @@ struct asic3_platform_data { /* Basic control of the SD ASIC */ -#define ASIC3_SDHWCTRL_Base 0x0E00 -#define ASIC3_SDHWCTRL_SDConf 0x00 +#define ASIC3_SDHWCTRL_BASE 0x0E00 +#define ASIC3_SDHWCTRL_SDCONF 0x00 #define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ #define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ @@ -242,10 +249,10 @@ struct asic3_platform_data { /* SD card power supply ctrl 1=enable */ #define ASIC3_SDHWCTRL_SDPWR (1 << 6) -#define ASIC3_EXTCF_Base 0x1100 +#define ASIC3_EXTCF_BASE 0x1100 -#define ASIC3_EXTCF_Select 0x00 -#define ASIC3_EXTCF_Reset 0x04 +#define ASIC3_EXTCF_SELECT 0x00 +#define ASIC3_EXTCF_RESET 0x04 #define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ #define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ @@ -279,222 +286,9 @@ struct asic3_platform_data { * SDIO_CTRL Control registers for SDIO operations * *****************************************************************************/ -#define ASIC3_SD_CONFIG_Base 0x0400 /* Assumes 32 bit addressing */ - -#define ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */ - -/* [0:8] SD Control Register Base Address */ -#define ASIC3_SD_CONFIG_Addr0 0x20 - -/* [9:31] SD Control Register Base Address */ -#define ASIC3_SD_CONFIG_Addr1 0x24 - -/* R/O: interrupt assigned to pin */ -#define ASIC3_SD_CONFIG_IntPin 0x78 - -/* - * Set to 0x1f to clock SD controller, 0 otherwise. - * At 0x82 - Gated Clock Ctrl - */ -#define ASIC3_SD_CONFIG_ClkStop 0x80 - -/* Control clock of SD controller */ -#define ASIC3_SD_CONFIG_ClockMode 0x84 -#define ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: SD pins status */ -#define ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual pwr ctrl */ - -/* auto power up after card inserted */ -#define ASIC3_SD_CONFIG_SDHC_Power2 0x92 - -/* auto power down when card removed */ -#define ASIC3_SD_CONFIG_SDHC_Power3 0x94 -#define ASIC3_SD_CONFIG_SDHC_CardDetect 0x98 -#define ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: support slot number */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Not used */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Not used*/ - -/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */ -#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8 -#define ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */ - -/* Bit 1: double buffer/single buffer */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0 - -/* Memory access enable (set to 1 to access SD Controller) */ -#define SD_CONFIG_COMMAND_MAE (1<<1) - -#define SD_CONFIG_CLK_ENABLE_ALL 0x1f - -#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */ -#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */ - - /* two bits - number of cycles for card detection */ -#define SD_CONFIG_CARDDETECTMODE_CLK ((x) & 0x3) - - -#define ASIC3_SD_CTRL_Base 0x1000 - -#define ASIC3_SD_CTRL_Cmd 0x00 -#define ASIC3_SD_CTRL_Arg0 0x08 -#define ASIC3_SD_CTRL_Arg1 0x0C -#define ASIC3_SD_CTRL_StopInternal 0x10 -#define ASIC3_SD_CTRL_TransferSectorCount 0x14 -#define ASIC3_SD_CTRL_Response0 0x18 -#define ASIC3_SD_CTRL_Response1 0x1C -#define ASIC3_SD_CTRL_Response2 0x20 -#define ASIC3_SD_CTRL_Response3 0x24 -#define ASIC3_SD_CTRL_Response4 0x28 -#define ASIC3_SD_CTRL_Response5 0x2C -#define ASIC3_SD_CTRL_Response6 0x30 -#define ASIC3_SD_CTRL_Response7 0x34 -#define ASIC3_SD_CTRL_CardStatus 0x38 -#define ASIC3_SD_CTRL_BufferCtrl 0x3C -#define ASIC3_SD_CTRL_IntMaskCard 0x40 -#define ASIC3_SD_CTRL_IntMaskBuffer 0x44 -#define ASIC3_SD_CTRL_CardClockCtrl 0x48 -#define ASIC3_SD_CTRL_MemCardXferDataLen 0x4C -#define ASIC3_SD_CTRL_MemCardOptionSetup 0x50 -#define ASIC3_SD_CTRL_ErrorStatus0 0x58 -#define ASIC3_SD_CTRL_ErrorStatus1 0x5C -#define ASIC3_SD_CTRL_DataPort 0x60 -#define ASIC3_SD_CTRL_TransactionCtrl 0x68 -#define ASIC3_SD_CTRL_SoftwareReset 0x1C0 - -#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0) - -#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8) - -#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15) -#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0) - -#define MEM_CARD_OPTION_REQUIRED 0x000e -#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x) & 0x0f) << 4) -#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14) -#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15) -#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 0 - -#define SD_CTRL_COMMAND_INDEX(x) ((x) & 0x3f) -#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6) -#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6) -#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8) -#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11) -#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12) -#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12) -#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13) -#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14) - -#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0) -#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8) - -#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0) -#define SD_CTRL_CARDSTATUS_RW_END (1 << 2) -#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3) -#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4) -#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5) -#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) -#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8) -#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9) -#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10) - -#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0) -#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1) -#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2) -#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3) -#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4) -#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5) -#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6) -#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7) -#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8) -#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9) -#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13) -#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14) -#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15) - -#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0) -#define SD_CTRL_INTMASKCARD_RW_END (1 << 2) -#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3) -#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4) -#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) -#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6) -#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7) -#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8) -#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9) -#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10) - -#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0) -#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1) -#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2) -#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3) -#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4) -#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5) -#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6) -#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7) -#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8) -#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9) -#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13) -#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14) -#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15) - -#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11) - -#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0) -#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4) -#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5) -#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6) - -#define ASIC3_SDIO_CTRL_Base 0x1200 - -#define ASIC3_SDIO_CTRL_Cmd 0x00 -#define ASIC3_SDIO_CTRL_CardPortSel 0x04 -#define ASIC3_SDIO_CTRL_Arg0 0x08 -#define ASIC3_SDIO_CTRL_Arg1 0x0C -#define ASIC3_SDIO_CTRL_TransferBlockCount 0x14 -#define ASIC3_SDIO_CTRL_Response0 0x18 -#define ASIC3_SDIO_CTRL_Response1 0x1C -#define ASIC3_SDIO_CTRL_Response2 0x20 -#define ASIC3_SDIO_CTRL_Response3 0x24 -#define ASIC3_SDIO_CTRL_Response4 0x28 -#define ASIC3_SDIO_CTRL_Response5 0x2C -#define ASIC3_SDIO_CTRL_Response6 0x30 -#define ASIC3_SDIO_CTRL_Response7 0x34 -#define ASIC3_SDIO_CTRL_CardStatus 0x38 -#define ASIC3_SDIO_CTRL_BufferCtrl 0x3C -#define ASIC3_SDIO_CTRL_IntMaskCard 0x40 -#define ASIC3_SDIO_CTRL_IntMaskBuffer 0x44 -#define ASIC3_SDIO_CTRL_CardXferDataLen 0x4C -#define ASIC3_SDIO_CTRL_CardOptionSetup 0x50 -#define ASIC3_SDIO_CTRL_ErrorStatus0 0x54 -#define ASIC3_SDIO_CTRL_ErrorStatus1 0x58 -#define ASIC3_SDIO_CTRL_DataPort 0x60 -#define ASIC3_SDIO_CTRL_TransactionCtrl 0x68 -#define ASIC3_SDIO_CTRL_CardIntCtrl 0x6C -#define ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70 -#define ASIC3_SDIO_CTRL_HostInformation 0x74 -#define ASIC3_SDIO_CTRL_ErrorCtrl 0x78 -#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C -#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 +#define ASIC3_SD_CONFIG_BASE 0x0400 /* Assumes 32 bit addressing */ +#define ASIC3_SD_CTRL_BASE 0x1000 +#define ASIC3_SDIO_CTRL_BASE 0x1200 #define ASIC3_MAP_SIZE_32BIT 0x2000 #define ASIC3_MAP_SIZE_16BIT 0x1000 diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h new file mode 100644 index 00000000000..c12c3c0932b --- /dev/null +++ b/include/linux/mfd/ezx-pcap.h @@ -0,0 +1,256 @@ +/* + * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * For further information, please see http://wiki.openezx.org/PCAP2 + */ + +#ifndef EZX_PCAP_H +#define EZX_PCAP_H + +struct pcap_subdev { + int id; + const char *name; + void *platform_data; +}; + +struct pcap_platform_data { + unsigned int irq_base; + unsigned int config; + void (*init) (void *); /* board specific init */ + int num_subdevs; + struct pcap_subdev *subdevs; +}; + +struct pcap_chip; + +int ezx_pcap_write(struct pcap_chip *, u8, u32); +int ezx_pcap_read(struct pcap_chip *, u8, u32 *); +int pcap_to_irq(struct pcap_chip *, int); +int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); +int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); + +#define PCAP_SECOND_PORT 1 +#define PCAP_CS_AH 2 + +#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000 +#define PCAP_REGISTER_READ_OP_BIT 0x00000000 + +#define PCAP_REGISTER_VALUE_MASK 0x01ffffff +#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000 +#define PCAP_REGISTER_ADDRESS_SHIFT 26 +#define PCAP_REGISTER_NUMBER 32 +#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff +#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff + +/* registers acessible by both pcap ports */ +#define PCAP_REG_ISR 0x0 /* Interrupt Status */ +#define PCAP_REG_MSR 0x1 /* Interrupt Mask */ +#define PCAP_REG_PSTAT 0x2 /* Processor Status */ +#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */ +#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */ +#define PCAP_REG_BATT 0x8 /* Battery Control */ +#define PCAP_REG_ADC 0x9 /* AD Control */ +#define PCAP_REG_ADR 0xa /* AD Result */ +#define PCAP_REG_CODEC 0xb /* Audio Codec Control */ +#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */ +#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */ +#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */ +#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */ +#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */ +#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */ +#define PCAP_REG_GP 0x1b /* General Purpose */ +#define PCAP_REG_TEST1 0x1c +#define PCAP_REG_TEST2 0x1d +#define PCAP_REG_VENDOR_TEST1 0x1e +#define PCAP_REG_VENDOR_TEST2 0x1f + +/* registers acessible by pcap port 1 only (a1200, e2 & e6) */ +#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */ +#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */ +#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */ +#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */ +#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */ +#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */ +#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */ +#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */ +#define PCAP_REG_PWR 0x13 /* Power Control */ +#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */ +#define PCAP_REG_VENDOR_REV 0x17 +#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */ + +/* PCAP2 Interrupts */ +#define PCAP_NIRQS 23 +#define PCAP_IRQ_ADCDONE 0 /* ADC done port 1 */ +#define PCAP_IRQ_TS 1 /* Touch Screen */ +#define PCAP_IRQ_1HZ 2 /* 1HZ timer */ +#define PCAP_IRQ_WH 3 /* ADC above high limit */ +#define PCAP_IRQ_WL 4 /* ADC below low limit */ +#define PCAP_IRQ_TODA 5 /* Time of day alarm */ +#define PCAP_IRQ_USB4V 6 /* USB above 4V */ +#define PCAP_IRQ_ONOFF 7 /* On/Off button */ +#define PCAP_IRQ_ONOFF2 8 /* On/Off button 2 */ +#define PCAP_IRQ_USB1V 9 /* USB above 1V */ +#define PCAP_IRQ_MOBPORT 10 +#define PCAP_IRQ_MIC 11 /* Mic attach/HS button */ +#define PCAP_IRQ_HS 12 /* Headset attach */ +#define PCAP_IRQ_ST 13 +#define PCAP_IRQ_PC 14 /* Power Cut */ +#define PCAP_IRQ_WARM 15 +#define PCAP_IRQ_EOL 16 /* Battery End Of Life */ +#define PCAP_IRQ_CLK 17 +#define PCAP_IRQ_SYSRST 18 /* System Reset */ +#define PCAP_IRQ_DUMMY 19 +#define PCAP_IRQ_ADCDONE2 20 /* ADC done port 2 */ +#define PCAP_IRQ_SOFTRESET 21 +#define PCAP_IRQ_MNEXB 22 + +/* voltage regulators */ +#define V1 0 +#define V2 1 +#define V3 2 +#define V4 3 +#define V5 4 +#define V6 5 +#define V7 6 +#define V8 7 +#define V9 8 +#define V10 9 +#define VAUX1 10 +#define VAUX2 11 +#define VAUX3 12 +#define VAUX4 13 +#define VSIM 14 +#define VSIM2 15 +#define VVIB 16 +#define SW1 17 +#define SW2 18 +#define SW3 19 +#define SW1S 20 +#define SW2S 21 + +#define PCAP_BATT_DAC_MASK 0x000000ff +#define PCAP_BATT_DAC_SHIFT 0 +#define PCAP_BATT_B_FDBK (1 << 8) +#define PCAP_BATT_EXT_ISENSE (1 << 9) +#define PCAP_BATT_V_COIN_MASK 0x00003c00 +#define PCAP_BATT_V_COIN_SHIFT 10 +#define PCAP_BATT_I_COIN (1 << 14) +#define PCAP_BATT_COIN_CH_EN (1 << 15) +#define PCAP_BATT_EOL_SEL_MASK 0x000e0000 +#define PCAP_BATT_EOL_SEL_SHIFT 17 +#define PCAP_BATT_EOL_CMP_EN (1 << 20) +#define PCAP_BATT_BATT_DET_EN (1 << 21) +#define PCAP_BATT_THERMBIAS_CTRL (1 << 22) + +#define PCAP_ADC_ADEN (1 << 0) +#define PCAP_ADC_RAND (1 << 1) +#define PCAP_ADC_AD_SEL1 (1 << 2) +#define PCAP_ADC_AD_SEL2 (1 << 3) +#define PCAP_ADC_ADA1_MASK 0x00000070 +#define PCAP_ADC_ADA1_SHIFT 4 +#define PCAP_ADC_ADA2_MASK 0x00000380 +#define PCAP_ADC_ADA2_SHIFT 7 +#define PCAP_ADC_ATO_MASK 0x00003c00 +#define PCAP_ADC_ATO_SHIFT 10 +#define PCAP_ADC_ATOX (1 << 14) +#define PCAP_ADC_MTR1 (1 << 15) +#define PCAP_ADC_MTR2 (1 << 16) +#define PCAP_ADC_TS_M_MASK 0x000e0000 +#define PCAP_ADC_TS_M_SHIFT 17 +#define PCAP_ADC_TS_REF_LOWPWR (1 << 20) +#define PCAP_ADC_TS_REFENB (1 << 21) +#define PCAP_ADC_BATT_I_POLARITY (1 << 22) +#define PCAP_ADC_BATT_I_ADC (1 << 23) + +#define PCAP_ADC_BANK_0 0 +#define PCAP_ADC_BANK_1 1 +/* ADC bank 0 */ +#define PCAP_ADC_CH_COIN 0 +#define PCAP_ADC_CH_BATT 1 +#define PCAP_ADC_CH_BPLUS 2 +#define PCAP_ADC_CH_MOBPORTB 3 +#define PCAP_ADC_CH_TEMPERATURE 4 +#define PCAP_ADC_CH_CHARGER_ID 5 +#define PCAP_ADC_CH_AD6 6 +/* ADC bank 1 */ +#define PCAP_ADC_CH_AD7 0 +#define PCAP_ADC_CH_AD8 1 +#define PCAP_ADC_CH_AD9 2 +#define PCAP_ADC_CH_TS_X1 3 +#define PCAP_ADC_CH_TS_X2 4 +#define PCAP_ADC_CH_TS_Y1 5 +#define PCAP_ADC_CH_TS_Y2 6 + +#define PCAP_ADC_T_NOW 0 +#define PCAP_ADC_T_IN_BURST 1 +#define PCAP_ADC_T_OUT_BURST 2 + +#define PCAP_ADC_ATO_IN_BURST 6 +#define PCAP_ADC_ATO_OUT_BURST 0 + +#define PCAP_ADC_TS_M_XY 1 +#define PCAP_ADC_TS_M_PRESSURE 2 +#define PCAP_ADC_TS_M_PLATE_X 3 +#define PCAP_ADC_TS_M_PLATE_Y 4 +#define PCAP_ADC_TS_M_STANDBY 5 +#define PCAP_ADC_TS_M_NONTS 6 + +#define PCAP_ADR_ADD1_MASK 0x000003ff +#define PCAP_ADR_ADD1_SHIFT 0 +#define PCAP_ADR_ADD2_MASK 0x000ffc00 +#define PCAP_ADR_ADD2_SHIFT 10 +#define PCAP_ADR_ADINC1 (1 << 20) +#define PCAP_ADR_ADINC2 (1 << 21) +#define PCAP_ADR_ASC (1 << 22) +#define PCAP_ADR_ONESHOT (1 << 23) + +#define PCAP_BUSCTRL_FSENB (1 << 0) +#define PCAP_BUSCTRL_USB_SUSPEND (1 << 1) +#define PCAP_BUSCTRL_USB_PU (1 << 2) +#define PCAP_BUSCTRL_USB_PD (1 << 3) +#define PCAP_BUSCTRL_VUSB_EN (1 << 4) +#define PCAP_BUSCTRL_USB_PS (1 << 5) +#define PCAP_BUSCTRL_VUSB_MSTR_EN (1 << 6) +#define PCAP_BUSCTRL_VBUS_PD_ENB (1 << 7) +#define PCAP_BUSCTRL_CURRLIM (1 << 8) +#define PCAP_BUSCTRL_RS232ENB (1 << 9) +#define PCAP_BUSCTRL_RS232_DIR (1 << 10) +#define PCAP_BUSCTRL_SE0_CONN (1 << 11) +#define PCAP_BUSCTRL_USB_PDM (1 << 12) +#define PCAP_BUSCTRL_BUS_PRI_ADJ (1 << 24) + +/* leds */ +#define PCAP_LED0 0 +#define PCAP_LED1 1 +#define PCAP_BL0 2 +#define PCAP_BL1 3 +#define PCAP_VIB 4 +#define PCAP_LED_3MA 0 +#define PCAP_LED_4MA 1 +#define PCAP_LED_5MA 2 +#define PCAP_LED_9MA 3 +#define PCAP_LED_GPIO_VAL_MASK 0x00ffffff +#define PCAP_LED_GPIO_EN 0x01000000 +#define PCAP_LED_GPIO_INVERT 0x02000000 +#define PCAP_LED_T_MASK 0xf +#define PCAP_LED_C_MASK 0x3 +#define PCAP_BL_MASK 0x1f +#define PCAP_BL0_SHIFT 0 +#define PCAP_LED0_EN (1 << 5) +#define PCAP_LED1_EN (1 << 6) +#define PCAP_LED0_T_SHIFT 7 +#define PCAP_LED1_T_SHIFT 11 +#define PCAP_LED0_C_SHIFT 15 +#define PCAP_LED1_C_SHIFT 17 +#define PCAP_BL1_SHIFT 20 +#define PCAP_VIB_MASK 0x3 +#define PCAP_VIB_SHIFT 20 +#define PCAP_VIB_EN (1 << 19) + +/* RTC */ +#define PCAP_RTC_DAY_MASK 0x3fff +#define PCAP_RTC_TOD_MASK 0xffff +#define PCAP_RTC_PC_MASK 0x7 +#define SEC_PER_DAY 86400 + +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index c377118884e..6b9c5d06690 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -22,7 +22,7 @@ * data for the MMC controller */ struct tmio_mmc_data { - unsigned int hclk; + const unsigned int hclk; }; /* diff --git a/include/linux/module.h b/include/linux/module.h index 505f20dcc1c..098bdb7bfac 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -363,6 +363,12 @@ struct module local_t ref; #endif #endif + +#ifdef CONFIG_CONSTRUCTORS + /* Constructor functions. */ + ctor_fn_t *ctors; + unsigned int num_ctors; +#endif }; #ifndef MODULE_ARCH_INIT #define MODULE_ARCH_INIT {} diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9ea8d6dfe54..d4a4d986779 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -224,6 +224,11 @@ struct netdev_hw_addr { struct rcu_head rcu_head; }; +struct netdev_hw_addr_list { + struct list_head list; + int count; +}; + struct hh_cache { struct hh_cache *hh_next; /* Next entry */ @@ -776,9 +781,8 @@ struct net_device unsigned char addr_len; /* hardware address length */ unsigned short dev_id; /* for shared network cards */ - struct list_head uc_list; /* Secondary unicast mac - addresses */ - int uc_count; /* Number of installed ucasts */ + struct netdev_hw_addr_list uc; /* Secondary unicast + mac addresses */ int uc_promisc; spinlock_t addr_list_lock; struct dev_addr_list *mc_list; /* Multicast mac addresses */ @@ -810,7 +814,8 @@ struct net_device because most packets are unicast) */ - struct list_head dev_addr_list; /* list of device hw addresses */ + struct netdev_hw_addr_list dev_addrs; /* list of device + hw addresses */ unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */ @@ -1806,11 +1811,11 @@ static inline void netif_addr_unlock_bh(struct net_device *dev) } /* - * dev_addr_list walker. Should be used only for read access. Call with + * dev_addrs walker. Should be used only for read access. Call with * rcu_read_lock held. */ #define for_each_dev_addr(dev, ha) \ - list_for_each_entry_rcu(ha, &dev->dev_addr_list, list) + list_for_each_entry_rcu(ha, &dev->dev_addrs.list, list) /* These functions live elsewhere (drivers/net/net_init.c, but related) */ diff --git a/include/linux/pps.h b/include/linux/pps.h new file mode 100644 index 00000000000..cfe5c7214ec --- /dev/null +++ b/include/linux/pps.h @@ -0,0 +1,122 @@ +/* + * PPS API header + * + * Copyright (C) 2005-2009 Rodolfo Giometti <giometti@linux.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef _PPS_H_ +#define _PPS_H_ + +#define PPS_VERSION "5.3.6" +#define PPS_MAX_SOURCES 16 /* should be enough... */ + +/* Implementation note: the logical states ``assert'' and ``clear'' + * are implemented in terms of the chip register, i.e. ``assert'' + * means the bit is set. */ + +/* + * 3.2 New data structures + */ + +#define PPS_API_VERS_1 1 +#define PPS_API_VERS PPS_API_VERS_1 /* we use API version 1 */ +#define PPS_MAX_NAME_LEN 32 + +/* 32-bit vs. 64-bit compatibility. + * + * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other + * architectures it's 8 bytes. On i386, there will be no padding between the + * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct + * pps_kparams. But on most platforms there will be padding to ensure correct + * alignment. + * + * The simple fix is probably to add an explicit padding. + * [David Woodhouse] + */ +struct pps_ktime { + __s64 sec; + __s32 nsec; + __u32 flags; +}; +#define PPS_TIME_INVALID (1<<0) /* used to specify timeout==NULL */ + +struct pps_kinfo { + __u32 assert_sequence; /* seq. num. of assert event */ + __u32 clear_sequence; /* seq. num. of clear event */ + struct pps_ktime assert_tu; /* time of assert event */ + struct pps_ktime clear_tu; /* time of clear event */ + int current_mode; /* current mode bits */ +}; + +struct pps_kparams { + int api_version; /* API version # */ + int mode; /* mode bits */ + struct pps_ktime assert_off_tu; /* offset compensation for assert */ + struct pps_ktime clear_off_tu; /* offset compensation for clear */ +}; + +/* + * 3.3 Mode bit definitions + */ + +/* Device/implementation parameters */ +#define PPS_CAPTUREASSERT 0x01 /* capture assert events */ +#define PPS_CAPTURECLEAR 0x02 /* capture clear events */ +#define PPS_CAPTUREBOTH 0x03 /* capture assert and clear events */ + +#define PPS_OFFSETASSERT 0x10 /* apply compensation for assert ev. */ +#define PPS_OFFSETCLEAR 0x20 /* apply compensation for clear ev. */ + +#define PPS_CANWAIT 0x100 /* can we wait for an event? */ +#define PPS_CANPOLL 0x200 /* bit reserved for future use */ + +/* Kernel actions */ +#define PPS_ECHOASSERT 0x40 /* feed back assert event to output */ +#define PPS_ECHOCLEAR 0x80 /* feed back clear event to output */ + +/* Timestamp formats */ +#define PPS_TSFMT_TSPEC 0x1000 /* select timespec format */ +#define PPS_TSFMT_NTPFP 0x2000 /* select NTP format */ + +/* + * 3.4.4 New functions: disciplining the kernel timebase + */ + +/* Kernel consumers */ +#define PPS_KC_HARDPPS 0 /* hardpps() (or equivalent) */ +#define PPS_KC_HARDPPS_PLL 1 /* hardpps() constrained to + use a phase-locked loop */ +#define PPS_KC_HARDPPS_FLL 2 /* hardpps() constrained to + use a frequency-locked loop */ +/* + * Here begins the implementation-specific part! + */ + +struct pps_fdata { + struct pps_kinfo info; + struct pps_ktime timeout; +}; + +#include <linux/ioctl.h> + +#define PPS_GETPARAMS _IOR('p', 0xa1, struct pps_kparams *) +#define PPS_SETPARAMS _IOW('p', 0xa2, struct pps_kparams *) +#define PPS_GETCAP _IOR('p', 0xa3, int *) +#define PPS_FETCH _IOWR('p', 0xa4, struct pps_fdata *) + +#endif /* _PPS_H_ */ diff --git a/include/linux/pps_kernel.h b/include/linux/pps_kernel.h new file mode 100644 index 00000000000..e0a193f830e --- /dev/null +++ b/include/linux/pps_kernel.h @@ -0,0 +1,89 @@ +/* + * PPS API kernel header + * + * Copyright (C) 2009 Rodolfo Giometti <giometti@linux.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pps.h> + +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/time.h> + +/* + * Global defines + */ + +/* The specific PPS source info */ +struct pps_source_info { + char name[PPS_MAX_NAME_LEN]; /* simbolic name */ + char path[PPS_MAX_NAME_LEN]; /* path of connected device */ + int mode; /* PPS's allowed mode */ + + void (*echo)(int source, int event, void *data); /* PPS echo function */ + + struct module *owner; + struct device *dev; +}; + +/* The main struct */ +struct pps_device { + struct pps_source_info info; /* PSS source info */ + + struct pps_kparams params; /* PPS's current params */ + + __u32 assert_sequence; /* PPS' assert event seq # */ + __u32 clear_sequence; /* PPS' clear event seq # */ + struct pps_ktime assert_tu; + struct pps_ktime clear_tu; + int current_mode; /* PPS mode at event time */ + + int go; /* PPS event is arrived? */ + wait_queue_head_t queue; /* PPS event queue */ + + unsigned int id; /* PPS source unique ID */ + struct cdev cdev; + struct device *dev; + int devno; + struct fasync_struct *async_queue; /* fasync method */ + spinlock_t lock; + + atomic_t usage; /* usage count */ +}; + +/* + * Global variables + */ + +extern spinlock_t pps_idr_lock; +extern struct idr pps_idr; +extern struct timespec pps_irq_ts[]; + +extern struct device_attribute pps_attrs[]; + +/* + * Exported functions + */ + +struct pps_device *pps_get_source(int source); +extern void pps_put_source(struct pps_device *pps); +extern int pps_register_source(struct pps_source_info *info, + int default_params); +extern void pps_unregister_source(int source); +extern int pps_register_cdev(struct pps_device *pps); +extern void pps_unregister_cdev(struct pps_device *pps); +extern void pps_event(int source, struct pps_ktime *ts, int event, void *data); diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 59e133d39d5..7456d7d87a1 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -81,7 +81,6 @@ extern long arch_ptrace(struct task_struct *child, long request, long addr, long data); -extern struct task_struct *ptrace_get_task_struct(pid_t pid); extern int ptrace_traceme(void); extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len); diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 6ba830fa853..ffa2efbbe38 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -232,7 +232,7 @@ struct mdp_superblock_1 { __le64 reshape_position; /* next address in array-space for reshape */ __le32 delta_disks; /* change in number of raid_disks */ __le32 new_layout; /* new layout */ - __le32 new_chunk; /* new chunk size (bytes) */ + __le32 new_chunk; /* new chunk size (512byte sectors) */ __u8 pad1[128-124]; /* set to 0 when written */ /* constant this-device information - 64 bytes */ diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 2245c78d587..dd31e7bae35 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -660,23 +660,54 @@ static inline void set_le_key_k_type(int version, struct reiserfs_key *key, cpu_to_le32(type2uniqueness(type))) : (void)(set_offset_v2_k_type(&(key->u.k_offset_v2), type)); } + static inline void set_le_ih_k_type(struct item_head *ih, int type) { set_le_key_k_type(ih_version(ih), &(ih->ih_key), type); } -#define is_direntry_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRENTRY) -#define is_direct_le_key(version,key) (le_key_k_type (version, key) == TYPE_DIRECT) -#define is_indirect_le_key(version,key) (le_key_k_type (version, key) == TYPE_INDIRECT) -#define is_statdata_le_key(version,key) (le_key_k_type (version, key) == TYPE_STAT_DATA) +static inline int is_direntry_le_key(int version, struct reiserfs_key *key) +{ + return le_key_k_type(version, key) == TYPE_DIRENTRY; +} + +static inline int is_direct_le_key(int version, struct reiserfs_key *key) +{ + return le_key_k_type(version, key) == TYPE_DIRECT; +} + +static inline int is_indirect_le_key(int version, struct reiserfs_key *key) +{ + return le_key_k_type(version, key) == TYPE_INDIRECT; +} + +static inline int is_statdata_le_key(int version, struct reiserfs_key *key) +{ + return le_key_k_type(version, key) == TYPE_STAT_DATA; +} // // item header has version. // -#define is_direntry_le_ih(ih) is_direntry_le_key (ih_version (ih), &((ih)->ih_key)) -#define is_direct_le_ih(ih) is_direct_le_key (ih_version (ih), &((ih)->ih_key)) -#define is_indirect_le_ih(ih) is_indirect_le_key (ih_version(ih), &((ih)->ih_key)) -#define is_statdata_le_ih(ih) is_statdata_le_key (ih_version (ih), &((ih)->ih_key)) +static inline int is_direntry_le_ih(struct item_head *ih) +{ + return is_direntry_le_key(ih_version(ih), &ih->ih_key); +} + +static inline int is_direct_le_ih(struct item_head *ih) +{ + return is_direct_le_key(ih_version(ih), &ih->ih_key); +} + +static inline int is_indirect_le_ih(struct item_head *ih) +{ + return is_indirect_le_key(ih_version(ih), &ih->ih_key); +} + +static inline int is_statdata_le_ih(struct item_head *ih) +{ + return is_statdata_le_key(ih_version(ih), &ih->ih_key); +} // // key is pointer to cpu key, result is cpu diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 4c5bcf6ca7e..511f42fc681 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -49,6 +49,8 @@ struct res_counter { struct res_counter *parent; }; +#define RESOURCE_MAX (unsigned long long)LLONG_MAX + /** * Helpers to interact with userspace * res_counter_read_u64() - returns the value of the specified member. diff --git a/include/linux/sched.h b/include/linux/sched.h index 02042e7f219..4d075426988 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -92,7 +92,6 @@ struct sched_param { #include <asm/processor.h> -struct mem_cgroup; struct exec_domain; struct futex_pi_state; struct robust_list_head; @@ -1879,9 +1878,6 @@ extern struct pid_namespace init_pid_ns; /* * find a task by one of its numerical ids * - * find_task_by_pid_type_ns(): - * it is the most generic call - it finds a task by all id, - * type and namespace specified * find_task_by_pid_ns(): * finds a task by its pid in the specified namespace * find_task_by_vpid(): @@ -1890,9 +1886,6 @@ extern struct pid_namespace init_pid_ns; * see also find_vpid() etc in include/linux/pid.h */ -extern struct task_struct *find_task_by_pid_type_ns(int type, int pid, - struct pid_namespace *ns); - extern struct task_struct *find_task_by_vpid(pid_t nr); extern struct task_struct *find_task_by_pid_ns(pid_t nr, struct pid_namespace *ns); diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 004f3b3342c..0c6a86b7959 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -43,6 +43,7 @@ int seq_release(struct inode *, struct file *); int seq_escape(struct seq_file *, const char *, const char *); int seq_putc(struct seq_file *m, char c); int seq_puts(struct seq_file *m, const char *s); +int seq_write(struct seq_file *seq, const void *data, size_t len); int seq_printf(struct seq_file *, const char *, ...) __attribute__ ((format (printf,2,3))); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 63ef24bc01d..b47b3f039d1 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -265,7 +265,7 @@ typedef unsigned char *sk_buff_data_t; * @transport_header: Transport layer header * @network_header: Network layer header * @mac_header: Link layer header - * @dst: destination entry + * @_skb_dst: destination entry * @sp: the security path, used for xfrm * @cb: Control buffer. Free for use by every layer. Put private vars here * @len: Length of actual data diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index a0faa18f7b1..9c4cd27f468 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -245,6 +245,9 @@ struct spi_master { */ u16 dma_alignment; + /* spi_device.mode flags understood by this controller driver */ + u16 mode_bits; + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another @@ -523,30 +526,7 @@ static inline void spi_message_free(struct spi_message *m) kfree(m); } -/** - * spi_setup - setup SPI mode and clock rate - * @spi: the device whose settings are being modified - * Context: can sleep, and no requests are queued to the device - * - * SPI protocol drivers may need to update the transfer mode if the - * device doesn't work with its default. They may likewise need - * to update clock rates or word sizes from initial values. This function - * changes those settings, and must be called from a context that can sleep. - * Except for SPI_CS_HIGH, which takes effect immediately, the changes take - * effect the next time the device is selected and data is transferred to - * or from it. When this function returns, the spi device is deselected. - * - * Note that this call will fail if the protocol driver specifies an option - * that the underlying controller or its driver does not support. For - * example, not all hardware supports wire transfers using nine bit words, - * LSB-first wire encoding, or active-high chipselects. - */ -static inline int -spi_setup(struct spi_device *spi) -{ - return spi->master->setup(spi); -} - +extern int spi_setup(struct spi_device *spi); /** * spi_async - asynchronous SPI transfer diff --git a/include/linux/swap.h b/include/linux/swap.h index 0cedf31af0b..c88b36665f7 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -319,10 +319,11 @@ static inline void disable_swap_token(void) } #ifdef CONFIG_CGROUP_MEM_RES_CTLR -extern void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent); +extern void +mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout); #else static inline void -mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) +mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout) { } #endif @@ -423,12 +424,6 @@ static inline swp_entry_t get_swap_page(void) #define has_swap_token(x) 0 #define disable_swap_token() do { } while(0) -static inline int mem_cgroup_cache_charge_swapin(struct page *page, - struct mm_struct *mm, gfp_t mask, bool locked) -{ - return 0; -} - static inline void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) { diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index eb96603d92d..17ba82efa48 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -143,7 +143,7 @@ static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step) * * Return %LSM_UNSAFE_* bits applied to an exec because of tracing. * - * Called with task_lock() held on @task. + * @task->cred_guard_mutex is held by the caller through the do_execve(). */ static inline int tracehook_unsafe_exec(struct task_struct *task) { diff --git a/include/linux/types.h b/include/linux/types.h index 5abe354020f..c42724f8c80 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -131,7 +131,7 @@ typedef __s64 int64_t; * * blkcnt_t is the type of the inode's block count. */ -#ifdef CONFIG_LBD +#ifdef CONFIG_LBDAF typedef u64 sector_t; typedef u64 blkcnt_t; #else diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h index 9797fec7748..3adeff82212 100644 --- a/include/linux/w1-gpio.h +++ b/include/linux/w1-gpio.h @@ -18,6 +18,7 @@ struct w1_gpio_platform_data { unsigned int pin; unsigned int is_open_drain:1; + void (*enable_external_pullup)(int enable); }; #endif /* _LINUX_W1_GPIO_H */ |