diff options
Diffstat (limited to 'include/linux')
197 files changed, 4372 insertions, 1170 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 8760be30b37..9547daddf81 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -183,7 +183,6 @@ header-y += if_ppp.h header-y += if_pppol2tp.h header-y += if_pppox.h header-y += if_slip.h -header-y += if_strip.h header-y += if_team.h header-y += if_tun.h header-y += if_tunnel.h @@ -376,6 +375,7 @@ header-y += tty.h header-y += types.h header-y += udf_fs_i.h header-y += udp.h +header-y += uhid.h header-y += uinput.h header-y += uio.h header-y += ultrasound.h diff --git a/include/linux/ac97_codec.h b/include/linux/ac97_codec.h deleted file mode 100644 index 0260c3e79fd..00000000000 --- a/include/linux/ac97_codec.h +++ /dev/null @@ -1,362 +0,0 @@ -#ifndef _AC97_CODEC_H_ -#define _AC97_CODEC_H_ - -#include <linux/types.h> -#include <linux/soundcard.h> - -/* AC97 1.0 */ -#define AC97_RESET 0x0000 // -#define AC97_MASTER_VOL_STEREO 0x0002 // Line Out -#define AC97_HEADPHONE_VOL 0x0004 // -#define AC97_MASTER_VOL_MONO 0x0006 // TAD Output -#define AC97_MASTER_TONE 0x0008 // -#define AC97_PCBEEP_VOL 0x000a // none -#define AC97_PHONE_VOL 0x000c // TAD Input (mono) -#define AC97_MIC_VOL 0x000e // MIC Input (mono) -#define AC97_LINEIN_VOL 0x0010 // Line Input (stereo) -#define AC97_CD_VOL 0x0012 // CD Input (stereo) -#define AC97_VIDEO_VOL 0x0014 // none -#define AC97_AUX_VOL 0x0016 // Aux Input (stereo) -#define AC97_PCMOUT_VOL 0x0018 // Wave Output (stereo) -#define AC97_RECORD_SELECT 0x001a // -#define AC97_RECORD_GAIN 0x001c -#define AC97_RECORD_GAIN_MIC 0x001e -#define AC97_GENERAL_PURPOSE 0x0020 -#define AC97_3D_CONTROL 0x0022 -#define AC97_MODEM_RATE 0x0024 -#define AC97_POWER_CONTROL 0x0026 - -/* AC'97 2.0 */ -#define AC97_EXTENDED_ID 0x0028 /* Extended Audio ID */ -#define AC97_EXTENDED_STATUS 0x002A /* Extended Audio Status */ -#define AC97_PCM_FRONT_DAC_RATE 0x002C /* PCM Front DAC Rate */ -#define AC97_PCM_SURR_DAC_RATE 0x002E /* PCM Surround DAC Rate */ -#define AC97_PCM_LFE_DAC_RATE 0x0030 /* PCM LFE DAC Rate */ -#define AC97_PCM_LR_ADC_RATE 0x0032 /* PCM LR ADC Rate */ -#define AC97_PCM_MIC_ADC_RATE 0x0034 /* PCM MIC ADC Rate */ -#define AC97_CENTER_LFE_MASTER 0x0036 /* Center + LFE Master Volume */ -#define AC97_SURROUND_MASTER 0x0038 /* Surround (Rear) Master Volume */ -#define AC97_RESERVED_3A 0x003A /* Reserved in AC '97 < 2.2 */ - -/* AC'97 2.2 */ -#define AC97_SPDIF_CONTROL 0x003A /* S/PDIF Control */ - -/* range 0x3c-0x58 - MODEM */ -#define AC97_EXTENDED_MODEM_ID 0x003C -#define AC97_EXTEND_MODEM_STAT 0x003E -#define AC97_LINE1_RATE 0x0040 -#define AC97_LINE2_RATE 0x0042 -#define AC97_HANDSET_RATE 0x0044 -#define AC97_LINE1_LEVEL 0x0046 -#define AC97_LINE2_LEVEL 0x0048 -#define AC97_HANDSET_LEVEL 0x004A -#define AC97_GPIO_CONFIG 0x004C -#define AC97_GPIO_POLARITY 0x004E -#define AC97_GPIO_STICKY 0x0050 -#define AC97_GPIO_WAKE_UP 0x0052 -#define AC97_GPIO_STATUS 0x0054 -#define AC97_MISC_MODEM_STAT 0x0056 -#define AC97_RESERVED_58 0x0058 - -/* registers 0x005a - 0x007a are vendor reserved */ - -#define AC97_VENDOR_ID1 0x007c -#define AC97_VENDOR_ID2 0x007e - -/* volume control bit defines */ -#define AC97_MUTE 0x8000 -#define AC97_MICBOOST 0x0040 -#define AC97_LEFTVOL 0x3f00 -#define AC97_RIGHTVOL 0x003f - -/* record mux defines */ -#define AC97_RECMUX_MIC 0x0000 -#define AC97_RECMUX_CD 0x0101 -#define AC97_RECMUX_VIDEO 0x0202 -#define AC97_RECMUX_AUX 0x0303 -#define AC97_RECMUX_LINE 0x0404 -#define AC97_RECMUX_STEREO_MIX 0x0505 -#define AC97_RECMUX_MONO_MIX 0x0606 -#define AC97_RECMUX_PHONE 0x0707 - -/* general purpose register bit defines */ -#define AC97_GP_LPBK 0x0080 /* Loopback mode */ -#define AC97_GP_MS 0x0100 /* Mic Select 0=Mic1, 1=Mic2 */ -#define AC97_GP_MIX 0x0200 /* Mono output select 0=Mix, 1=Mic */ -#define AC97_GP_RLBK 0x0400 /* Remote Loopback - Modem line codec */ -#define AC97_GP_LLBK 0x0800 /* Local Loopback - Modem Line codec */ -#define AC97_GP_LD 0x1000 /* Loudness 1=on */ -#define AC97_GP_3D 0x2000 /* 3D Enhancement 1=on */ -#define AC97_GP_ST 0x4000 /* Stereo Enhancement 1=on */ -#define AC97_GP_POP 0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */ - -/* extended audio status and control bit defines */ -#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */ -#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */ -#define AC97_EA_SPDIF 0x0004 /* S/PDIF Enable bit */ -#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */ -#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */ -#define AC97_EA_SDAC 0x0040 /* PCM Surround DACs are ready (Read only) */ -#define AC97_EA_LDAC 0x0080 /* PCM LFE DAC is ready (Read only) */ -#define AC97_EA_MDAC 0x0100 /* MIC ADC is ready (Read only) */ -#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */ -#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */ -#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */ -#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */ -#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */ -#define AC97_EA_SLOT_MASK 0xffcf /* Mask for slot assignment bits */ -#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */ -#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */ -#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */ -#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */ - -/* S/PDIF control bit defines */ -#define AC97_SC_PRO 0x0001 /* Professional status */ -#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */ -#define AC97_SC_COPY 0x0004 /* Copyright status */ -#define AC97_SC_PRE 0x0008 /* Preemphasis status */ -#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */ -#define AC97_SC_L 0x0800 /* Generation Level status */ -#define AC97_SC_SPSR_MASK 0xcfff /* S/PDIF Sample Rate bits */ -#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */ -#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */ -#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */ -#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */ -#define AC97_SC_V 0x8000 /* Validity status */ - -/* powerdown control and status bit defines */ - -/* status */ -#define AC97_PWR_MDM 0x0010 /* Modem section ready */ -#define AC97_PWR_REF 0x0008 /* Vref nominal */ -#define AC97_PWR_ANL 0x0004 /* Analog section ready */ -#define AC97_PWR_DAC 0x0002 /* DAC section ready */ -#define AC97_PWR_ADC 0x0001 /* ADC section ready */ - -/* control */ -#define AC97_PWR_PR0 0x0100 /* ADC and Mux powerdown */ -#define AC97_PWR_PR1 0x0200 /* DAC powerdown */ -#define AC97_PWR_PR2 0x0400 /* Output mixer powerdown (Vref on) */ -#define AC97_PWR_PR3 0x0800 /* Output mixer powerdown (Vref off) */ -#define AC97_PWR_PR4 0x1000 /* AC-link powerdown */ -#define AC97_PWR_PR5 0x2000 /* Internal Clk disable */ -#define AC97_PWR_PR6 0x4000 /* HP amp powerdown */ -#define AC97_PWR_PR7 0x8000 /* Modem off - if supported */ - -/* extended audio ID register bit defines */ -#define AC97_EXTID_VRA 0x0001 -#define AC97_EXTID_DRA 0x0002 -#define AC97_EXTID_SPDIF 0x0004 -#define AC97_EXTID_VRM 0x0008 -#define AC97_EXTID_DSA0 0x0010 -#define AC97_EXTID_DSA1 0x0020 -#define AC97_EXTID_CDAC 0x0040 -#define AC97_EXTID_SDAC 0x0080 -#define AC97_EXTID_LDAC 0x0100 -#define AC97_EXTID_AMAP 0x0200 -#define AC97_EXTID_REV0 0x0400 -#define AC97_EXTID_REV1 0x0800 -#define AC97_EXTID_ID0 0x4000 -#define AC97_EXTID_ID1 0x8000 - -/* extended status register bit defines */ -#define AC97_EXTSTAT_VRA 0x0001 -#define AC97_EXTSTAT_DRA 0x0002 -#define AC97_EXTSTAT_SPDIF 0x0004 -#define AC97_EXTSTAT_VRM 0x0008 -#define AC97_EXTSTAT_SPSA0 0x0010 -#define AC97_EXTSTAT_SPSA1 0x0020 -#define AC97_EXTSTAT_CDAC 0x0040 -#define AC97_EXTSTAT_SDAC 0x0080 -#define AC97_EXTSTAT_LDAC 0x0100 -#define AC97_EXTSTAT_MADC 0x0200 -#define AC97_EXTSTAT_SPCV 0x0400 -#define AC97_EXTSTAT_PRI 0x0800 -#define AC97_EXTSTAT_PRJ 0x1000 -#define AC97_EXTSTAT_PRK 0x2000 -#define AC97_EXTSTAT_PRL 0x4000 - -/* extended audio ID register bit defines */ -#define AC97_EXTID_VRA 0x0001 -#define AC97_EXTID_DRA 0x0002 -#define AC97_EXTID_SPDIF 0x0004 -#define AC97_EXTID_VRM 0x0008 -#define AC97_EXTID_DSA0 0x0010 -#define AC97_EXTID_DSA1 0x0020 -#define AC97_EXTID_CDAC 0x0040 -#define AC97_EXTID_SDAC 0x0080 -#define AC97_EXTID_LDAC 0x0100 -#define AC97_EXTID_AMAP 0x0200 -#define AC97_EXTID_REV0 0x0400 -#define AC97_EXTID_REV1 0x0800 -#define AC97_EXTID_ID0 0x4000 -#define AC97_EXTID_ID1 0x8000 - -/* extended status register bit defines */ -#define AC97_EXTSTAT_VRA 0x0001 -#define AC97_EXTSTAT_DRA 0x0002 -#define AC97_EXTSTAT_SPDIF 0x0004 -#define AC97_EXTSTAT_VRM 0x0008 -#define AC97_EXTSTAT_SPSA0 0x0010 -#define AC97_EXTSTAT_SPSA1 0x0020 -#define AC97_EXTSTAT_CDAC 0x0040 -#define AC97_EXTSTAT_SDAC 0x0080 -#define AC97_EXTSTAT_LDAC 0x0100 -#define AC97_EXTSTAT_MADC 0x0200 -#define AC97_EXTSTAT_SPCV 0x0400 -#define AC97_EXTSTAT_PRI 0x0800 -#define AC97_EXTSTAT_PRJ 0x1000 -#define AC97_EXTSTAT_PRK 0x2000 -#define AC97_EXTSTAT_PRL 0x4000 - -/* useful power states */ -#define AC97_PWR_D0 0x0000 /* everything on */ -#define AC97_PWR_D1 AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4 -#define AC97_PWR_D2 AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4 -#define AC97_PWR_D3 AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4 -#define AC97_PWR_ANLOFF AC97_PWR_PR2|AC97_PWR_PR3 /* analog section off */ - -/* Total number of defined registers. */ -#define AC97_REG_CNT 64 - - -/* OSS interface to the ac97s.. */ -#define AC97_STEREO_MASK (SOUND_MASK_VOLUME|SOUND_MASK_PCM|\ - SOUND_MASK_LINE|SOUND_MASK_CD|\ - SOUND_MASK_ALTPCM|SOUND_MASK_IGAIN|\ - SOUND_MASK_LINE1|SOUND_MASK_VIDEO) - -#define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \ - SOUND_MASK_BASS|SOUND_MASK_TREBLE|\ - SOUND_MASK_SPEAKER|SOUND_MASK_MIC|\ - SOUND_MASK_PHONEIN|SOUND_MASK_PHONEOUT) - -#define AC97_RECORD_MASK (SOUND_MASK_MIC|\ - SOUND_MASK_CD|SOUND_MASK_IGAIN|SOUND_MASK_VIDEO|\ - SOUND_MASK_LINE1| SOUND_MASK_LINE|\ - SOUND_MASK_PHONEIN) - -/* original check is not good enough in case FOO is greater than - * SOUND_MIXER_NRDEVICES because the supported_mixers has exactly - * SOUND_MIXER_NRDEVICES elements. - * before matching the given mixer against the bitmask in supported_mixers we - * check if mixer number exceeds maximum allowed size which is as mentioned - * above SOUND_MIXER_NRDEVICES */ -#define supported_mixer(CODEC,FOO) ((FOO >= 0) && \ - (FOO < SOUND_MIXER_NRDEVICES) && \ - (CODEC)->supported_mixers & (1<<FOO) ) - -struct ac97_codec { - /* Linked list of codecs */ - struct list_head list; - - /* AC97 controller connected with */ - void *private_data; - - char *name; - int id; - int dev_mixer; - int type; - u32 model; - - unsigned int modem:1; - - struct ac97_ops *codec_ops; - - /* controller specific lower leverl ac97 accessing routines. - must be re-entrant safe */ - u16 (*codec_read) (struct ac97_codec *codec, u8 reg); - void (*codec_write) (struct ac97_codec *codec, u8 reg, u16 val); - - /* Wait for codec-ready. Ok to sleep here. */ - void (*codec_wait) (struct ac97_codec *codec); - - /* callback used by helper drivers for interesting ac97 setups */ - void (*codec_unregister) (struct ac97_codec *codec); - - struct ac97_driver *driver; - void *driver_private; /* Private data for the driver */ - - spinlock_t lock; - - /* OSS mixer masks */ - int modcnt; - int supported_mixers; - int stereo_mixers; - int record_sources; - - /* Property flags */ - int flags; - - int bit_resolution; - - /* OSS mixer interface */ - int (*read_mixer) (struct ac97_codec *codec, int oss_channel); - void (*write_mixer)(struct ac97_codec *codec, int oss_channel, - unsigned int left, unsigned int right); - int (*recmask_io) (struct ac97_codec *codec, int rw, int mask); - int (*mixer_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg); - - /* saved OSS mixer states */ - unsigned int mixer_state[SOUND_MIXER_NRDEVICES]; - - /* Software Modem interface */ - int (*modem_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg); -}; - -/* - * Operation structures for each known AC97 chip - */ - -struct ac97_ops -{ - /* Initialise */ - int (*init)(struct ac97_codec *c); - /* Amplifier control */ - int (*amplifier)(struct ac97_codec *codec, int on); - /* Digital mode control */ - int (*digital)(struct ac97_codec *codec, int slots, int rate, int mode); -#define AUDIO_DIGITAL 0x8000 -#define AUDIO_PRO 0x4000 -#define AUDIO_DRS 0x2000 -#define AUDIO_CCMASK 0x003F - -#define AC97_DELUDED_MODEM 1 /* Audio codec reports its a modem */ -#define AC97_NO_PCM_VOLUME 2 /* Volume control is missing */ -#define AC97_DEFAULT_POWER_OFF 4 /* Needs warm reset to power up */ -}; - -extern int ac97_probe_codec(struct ac97_codec *); - -extern struct ac97_codec *ac97_alloc_codec(void); -extern void ac97_release_codec(struct ac97_codec *codec); - -struct ac97_driver { - struct list_head list; - char *name; - u32 codec_id; - u32 codec_mask; - int (*probe) (struct ac97_codec *codec, struct ac97_driver *driver); - void (*remove) (struct ac97_codec *codec, struct ac97_driver *driver); -}; - -/* quirk types */ -enum { - AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */ - AC97_TUNE_NONE = 0, /* nothing extra to do */ - AC97_TUNE_HP_ONLY, /* headphone (true line-out) control as master only */ - AC97_TUNE_SWAP_HP, /* swap headphone and master controls */ - AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */ - AC97_TUNE_AD_SHARING, /* for AD1985, turn on OMS bit and use headphone */ - AC97_TUNE_ALC_JACK, /* for Realtek, enable JACK detection */ -}; - -struct ac97_quirk { - unsigned short vendor; /* PCI vendor id */ - unsigned short device; /* PCI device id */ - unsigned short mask; /* device id bit mask, 0 = accept all */ - const char *name; /* name shown as info */ - int type; /* quirk type above */ -}; - -#endif /* _AC97_CODEC_H_ */ diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 76dd1b199a1..fe1d7b283cb 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -231,6 +231,7 @@ enum ssp_chip_select { struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. + * @bus_id: identifier for this bus * @num_chipselect: chipselects are used to distinguish individual * SPI slaves, and are numbered from zero to num_chipselects - 1. * each slave has a chipselect signal, but it's common that not @@ -259,19 +260,13 @@ struct pl022_ssp_controller { * struct ssp_config_chip - spi_board_info.controller_data for SPI * slave devices, copied to spi_device.controller_data. * - * @lbm: used for test purpose to internally connect RX and TX * @iface: Interface type(Motorola, TI, Microwire, Universal) * @hierarchy: sets whether interface is master or slave * @slave_tx_disable: SSPTXD is disconnected (in slave mode only) * @clk_freq: Tune freq parameters of SSP(when in master mode) - * @endian_rx: Endianess of Data in Rx FIFO - * @endian_tx: Endianess of Data in Tx FIFO - * @data_size: Width of data element(4 to 32 bits) * @com_mode: communication mode: polling, Interrupt or DMA * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode) * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode) - * @clk_phase: Motorola SPI interface Clock phase - * @clk_pol: Motorola SPI interface Clock polarity * @ctrl_len: Microwire interface: Control length * @wait_state: Microwire interface: Wait state * @duplex: Microwire interface: Full/Half duplex @@ -279,8 +274,6 @@ struct pl022_ssp_controller { * before sampling the incoming line * @cs_control: function pointer to board-specific function to * assert/deassert I/O port to control HW generation of devices chip-select. - * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph) - * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { enum ssp_interface iface; diff --git a/include/linux/async.h b/include/linux/async.h index 68a9530196f..7a24fe9b44b 100644 --- a/include/linux/async.h +++ b/include/linux/async.h @@ -9,19 +9,47 @@ * as published by the Free Software Foundation; version 2 * of the License. */ +#ifndef __ASYNC_H__ +#define __ASYNC_H__ #include <linux/types.h> #include <linux/list.h> typedef u64 async_cookie_t; typedef void (async_func_ptr) (void *data, async_cookie_t cookie); +struct async_domain { + struct list_head node; + struct list_head domain; + int count; + unsigned registered:1; +}; + +/* + * domain participates in global async_synchronize_full + */ +#define ASYNC_DOMAIN(_name) \ + struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \ + .domain = LIST_HEAD_INIT(_name.domain), \ + .count = 0, \ + .registered = 1 } + +/* + * domain is free to go out of scope as soon as all pending work is + * complete, this domain does not participate in async_synchronize_full + */ +#define ASYNC_DOMAIN_EXCLUSIVE(_name) \ + struct async_domain _name = { .node = LIST_HEAD_INIT(_name.node), \ + .domain = LIST_HEAD_INIT(_name.domain), \ + .count = 0, \ + .registered = 0 } extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data); extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data, - struct list_head *list); + struct async_domain *domain); +void async_unregister_domain(struct async_domain *domain); extern void async_synchronize_full(void); -extern void async_synchronize_full_domain(struct list_head *list); +extern void async_synchronize_full_domain(struct async_domain *domain); extern void async_synchronize_cookie(async_cookie_t cookie); extern void async_synchronize_cookie_domain(async_cookie_t cookie, - struct list_head *list); - + struct async_domain *domain); +#endif diff --git a/include/linux/ata.h b/include/linux/ata.h index 32df2b6ef0e..5713d3ac381 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -578,6 +578,7 @@ static inline int ata_is_data(u8 prot) ((u64) (id)[(n) + 0]) ) #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) +#define ata_id_has_da(id) ((id)[77] & (1 << 4)) static inline bool ata_id_has_hipm(const u16 *id) { diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8deaf6d050c..1954a4e305a 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -7,6 +7,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> #include <linux/bcma/bcma_driver_mips.h> +#include <linux/bcma/bcma_driver_gmac_cmn.h> #include <linux/ssb/ssb.h> /* SPROM sharing */ #include "bcma_regs.h" @@ -70,6 +71,13 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 +#define BCMA_CORE_4706_SOC_RAM 0x50E +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ +#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC +#define BCMA_CORE_DDR23_PHY 0x5DD #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 @@ -130,6 +138,36 @@ struct bcma_host_ops { #define BCMA_MAX_NR_CORES 16 +/* Chip IDs of PCIe devices */ +#define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43224 43224 +#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 +#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +#define BCMA_CHIP_ID_BCM43225 43225 +#define BCMA_CHIP_ID_BCM43227 43227 +#define BCMA_CHIP_ID_BCM43228 43228 +#define BCMA_CHIP_ID_BCM43421 43421 +#define BCMA_CHIP_ID_BCM43428 43428 +#define BCMA_CHIP_ID_BCM43431 43431 +#define BCMA_CHIP_ID_BCM43460 43460 +#define BCMA_CHIP_ID_BCM4331 0x4331 +#define BCMA_CHIP_ID_BCM6362 0x6362 +#define BCMA_CHIP_ID_BCM4360 0x4360 +#define BCMA_CHIP_ID_BCM4352 0x4352 + +/* Chip IDs of SoCs */ +#define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_CHIP_ID_BCM4716 0x4716 +#define BCMA_PKG_ID_BCM4716 8 +#define BCMA_PKG_ID_BCM4717 9 +#define BCMA_PKG_ID_BCM4718 10 +#define BCMA_CHIP_ID_BCM47162 47162 +#define BCMA_CHIP_ID_BCM4748 0x4748 +#define BCMA_CHIP_ID_BCM4749 0x4749 +#define BCMA_CHIP_ID_BCM5356 0x5356 +#define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_CHIP_ID_BCM53572 53572 + struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; @@ -215,6 +253,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; struct bcma_drv_mips drv_mips; + struct bcma_drv_gmac_cmn drv_gmac_cmn; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 8bbfe31fbac..3c80885fa82 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,7 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -45,6 +45,7 @@ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ #define BCMA_CC_CORECTL 0x0008 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -88,6 +89,11 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ +#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ +#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ +#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ +#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -117,10 +123,58 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 +/* Start/busy bit in flashcontrol */ +#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff +#define BCMA_CC_FLASHCTL_ACTION 0x00000700 +#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ #define BCMA_CC_FLASHCTL_START 0x80000000 #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +/* Flashcontrol action + opcodes for ST flashes */ +#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ +#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ +#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ +#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ +#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +/* Flashcontrol action + opcodes for Atmel flashes */ +#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 +#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 +#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 +#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 +#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 #define BCMA_CC_FLASHADDR 0x0044 #define BCMA_CC_FLASHDATA 0x0048 +/* Status register bits for ST flashes */ +#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ +#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ +#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ +#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 +#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ +/* Status register bits for Atmel flashes */ +#define BCMA_CC_FLASHDATA_AT_READY 0x80 +#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 +#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 +#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ @@ -280,6 +334,15 @@ /* 4706 PMU */ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 +#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ +#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 +#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 @@ -308,6 +371,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +#define BCMA_CC_PMU_PLL_CTL0 0 +#define BCMA_CC_PMU_PLL_CTL1 1 +#define BCMA_CC_PMU_PLL_CTL2 2 +#define BCMA_CC_PMU_PLL_CTL3 3 +#define BCMA_CC_PMU_PLL_CTL4 4 +#define BCMA_CC_PMU_PLL_CTL5 5 + +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 + +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 + /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ @@ -321,9 +397,18 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +/* 43224 chip-specific ChipControl register bits */ +#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ +#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ +#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ + +/* 4313 Chip specific ChipControl register bits */ +#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -411,5 +496,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); +extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_gmac_cmn.h b/include/linux/bcma/bcma_driver_gmac_cmn.h new file mode 100644 index 00000000000..def894b83b0 --- /dev/null +++ b/include/linux/bcma/bcma_driver_gmac_cmn.h @@ -0,0 +1,100 @@ +#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_ +#define LINUX_BCMA_DRIVER_GMAC_CMN_H_ + +#include <linux/types.h> + +#define BCMA_GMAC_CMN_STAG0 0x000 +#define BCMA_GMAC_CMN_STAG1 0x004 +#define BCMA_GMAC_CMN_STAG2 0x008 +#define BCMA_GMAC_CMN_STAG3 0x00C +#define BCMA_GMAC_CMN_PARSER_CTL 0x020 +#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024 +#define BCMA_GMAC_CMN_PHY_ACCESS 0x100 +#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff +#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000 +#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16 +#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000 +#define BCMA_GMAC_CMN_PA_REG_SHIFT 24 +#define BCMA_GMAC_CMN_PA_WRITE 0x20000000 +#define BCMA_GMAC_CMN_PA_START 0x40000000 +#define BCMA_GMAC_CMN_PHY_CTL 0x104 +#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f +#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000 +#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16 +#define BCMA_GMAC_CMN_PC_MTE 0x00800000 +#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110 +#define BCMA_GMAC_CMN_CFP_ACCESS 0x200 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C +#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C +#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250 +#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0 +#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4 +#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8 +#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC +#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0 +#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300 +#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304 +#define BCMA_GMAC_CMN_UDF_0_A8 0x308 +#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310 +#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314 +#define BCMA_GMAC_CMN_UDF_1_A8 0x318 +#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320 +#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324 +#define BCMA_GMAC_CMN_UDF_2_A8 0x328 +#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330 +#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334 +#define BCMA_GMAC_CMN_UDF_0_B8 0x338 +#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340 +#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344 +#define BCMA_GMAC_CMN_UDF_1_B8 0x348 +#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350 +#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354 +#define BCMA_GMAC_CMN_UDF_2_B8 0x358 +#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360 +#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364 +#define BCMA_GMAC_CMN_UDF_0_C8 0x368 +#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370 +#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374 +#define BCMA_GMAC_CMN_UDF_1_C8 0x378 +#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380 +#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384 +#define BCMA_GMAC_CMN_UDF_2_C8 0x388 +#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390 +#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394 +#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394 + +struct bcma_drv_gmac_cmn { + struct bcma_device *core; + + /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and + * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */ + struct mutex phy_mutex; +}; + +/* Register access */ +#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset) +#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset) +#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) +#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) + +#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN +extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); +#else +static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } +#endif + +#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ diff --git a/include/linux/can.h b/include/linux/can.h index 9a19bcb3eea..018055efc03 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -21,7 +21,7 @@ /* special address description flags for the CAN_ID */ #define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ #define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ -#define CAN_ERR_FLAG 0x20000000U /* error frame */ +#define CAN_ERR_FLAG 0x20000000U /* error message frame */ /* valid bits in CAN ID for frame formats */ #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ @@ -32,32 +32,84 @@ * Controller Area Network Identifier structure * * bit 0-28 : CAN identifier (11/29 bit) - * bit 29 : error frame flag (0 = data frame, 1 = error frame) + * bit 29 : error message frame flag (0 = data frame, 1 = error message) * bit 30 : remote transmission request flag (1 = rtr frame) * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) */ typedef __u32 canid_t; +#define CAN_SFF_ID_BITS 11 +#define CAN_EFF_ID_BITS 29 + /* - * Controller Area Network Error Frame Mask structure + * Controller Area Network Error Message Frame Mask structure * * bit 0-28 : error class mask (see include/linux/can/error.h) * bit 29-31 : set to zero */ typedef __u32 can_err_mask_t; +/* CAN payload length and DLC definitions according to ISO 11898-1 */ +#define CAN_MAX_DLC 8 +#define CAN_MAX_DLEN 8 + +/* CAN FD payload length and DLC definitions according to ISO 11898-7 */ +#define CANFD_MAX_DLC 15 +#define CANFD_MAX_DLEN 64 + /** * struct can_frame - basic CAN frame structure - * @can_id: the CAN ID of the frame and CAN_*_FLAG flags, see above. - * @can_dlc: the data length field of the CAN frame - * @data: the CAN frame payload. + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @can_dlc: frame payload length in byte (0 .. 8) aka data length code + * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 + * mapping of the 'data length code' to the real payload length + * @data: CAN frame payload (up to 8 byte) */ struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* data length code: 0 .. 8 */ - __u8 data[8] __attribute__((aligned(8))); + __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); +}; + +/* + * defined bits for canfd_frame.flags + * + * As the default for CAN FD should be to support the high data rate in the + * payload section of the frame (HDR) and to support up to 64 byte in the + * data section (EDL) the bits are only set in the non-default case. + * Btw. as long as there's no real implementation for CAN FD network driver + * these bits are only preliminary. + * + * RX: NOHDR/NOEDL - info about received CAN FD frame + * ESI - bit from originating CAN controller + * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller + * ESI - bit is set by local CAN controller + */ +#define CANFD_NOHDR 0x01 /* frame without high data rate */ +#define CANFD_NOEDL 0x02 /* frame without extended data length */ +#define CANFD_ESI 0x04 /* error state indicator */ + +/** + * struct canfd_frame - CAN flexible data rate frame structure + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN) + * @flags: additional flags for CAN FD + * @__res0: reserved / padding + * @__res1: reserved / padding + * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte) + */ +struct canfd_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + __u8 len; /* frame payload length in byte */ + __u8 flags; /* additional flags for CAN FD */ + __u8 __res0; /* reserved / padding */ + __u8 __res1; /* reserved / padding */ + __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); }; +#define CAN_MTU (sizeof(struct can_frame)) +#define CANFD_MTU (sizeof(struct canfd_frame)) + /* particular protocols of the protocol family PF_CAN */ #define CAN_RAW 1 /* RAW sockets */ #define CAN_BCM 2 /* Broadcast Manager */ @@ -97,7 +149,7 @@ struct sockaddr_can { * <received_can_id> & mask == can_id & mask * * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can - * filter for error frames (CAN_ERR_FLAG bit set in mask). + * filter for error message frames (CAN_ERR_FLAG bit set in mask). */ struct can_filter { canid_t can_id; diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 0ccc1cd28b9..78c6c52073a 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -17,10 +17,10 @@ #include <linux/skbuff.h> #include <linux/netdevice.h> -#define CAN_VERSION "20090105" +#define CAN_VERSION "20120528" /* increment this number each time you change some user-space interface */ -#define CAN_ABI_VERSION "8" +#define CAN_ABI_VERSION "9" #define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 5d2efe7e3f1..2b2fc345afc 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -33,7 +33,7 @@ struct can_priv { struct can_device_stats can_stats; struct can_bittiming bittiming; - struct can_bittiming_const *bittiming_const; + const struct can_bittiming_const *bittiming_const; struct can_clock clock; enum can_state state; @@ -61,23 +61,40 @@ struct can_priv { * To be used in the CAN netdriver receive path to ensure conformance with * ISO 11898-1 Chapter 8.4.2.3 (DLC field) */ -#define get_can_dlc(i) (min_t(__u8, (i), 8)) +#define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC)) +#define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC)) /* Drop a given socketbuffer if it does not contain a valid CAN frame. */ static inline int can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) { - const struct can_frame *cf = (struct can_frame *)skb->data; - - if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) { - kfree_skb(skb); - dev->stats.tx_dropped++; - return 1; - } + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else + goto inval_skb; return 0; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return 1; } +/* get data length from can_dlc with sanitized can_dlc */ +u8 can_dlc2len(u8 can_dlc); + +/* map the sanitized data length to an appropriate data length code */ +u8 can_len2dlc(u8 len); + struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); void free_candev(struct net_device *dev); diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 63e855ea6b8..7b7148bded7 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -1,7 +1,7 @@ /* * linux/can/error.h * - * Definitions of the CAN error frame to be filtered and passed to the user. + * Definitions of the CAN error messages to be filtered and passed to the user. * * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> * Copyright (c) 2002-2007 Volkswagen Group Electronic Research @@ -12,7 +12,7 @@ #ifndef CAN_ERROR_H #define CAN_ERROR_H -#define CAN_ERR_DLC 8 /* dlc for error frames */ +#define CAN_ERR_DLC 8 /* dlc for error message frames */ /* error class (mask) in can_id */ #define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */ diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h index 781f3a3701b..a814062b071 100644 --- a/include/linux/can/raw.h +++ b/include/linux/can/raw.h @@ -23,7 +23,8 @@ enum { CAN_RAW_FILTER = 1, /* set 0 .. n can_filter(s) */ CAN_RAW_ERR_FILTER, /* set filter for error frames */ CAN_RAW_LOOPBACK, /* local loopback (default:on) */ - CAN_RAW_RECV_OWN_MSGS /* receive my own msgs (default:off) */ + CAN_RAW_RECV_OWN_MSGS, /* receive my own msgs (default:off) */ + CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ }; #endif diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index d3f5fba2c15..c90eaa80344 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -500,21 +500,8 @@ struct cgroup_subsys { const char *name; /* - * Protects sibling/children links of cgroups in this - * hierarchy, plus protects which hierarchy (or none) the - * subsystem is a part of (i.e. root/sibling). To avoid - * potential deadlocks, the following operations should not be - * undertaken while holding any hierarchy_mutex: - * - * - allocating memory - * - initiating hotplug events - */ - struct mutex hierarchy_mutex; - struct lock_class_key subsys_key; - - /* * Link to parent, and list entry in parent's children. - * Protected by this->hierarchy_mutex and cgroup_lock() + * Protected by cgroup_lock() */ struct cgroupfs_root *root; struct list_head sibling; @@ -602,7 +589,7 @@ int cgroup_attach_task_all(struct task_struct *from, struct task_struct *); * the lifetime of cgroup_subsys_state is subsys's matter. * * Looking up and scanning function should be called under rcu_read_lock(). - * Taking cgroup_mutex()/hierarchy_mutex() is not necessary for following calls. + * Taking cgroup_mutex is not necessary for following calls. * But the css returned by this routine can be "not populated yet" or "being * destroyed". The caller should check css and cgroup's status. */ diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index eb3f84bc532..9c7f5807824 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -64,7 +64,7 @@ struct clk { .parent_names = _parent_names, \ .num_parents = ARRAY_SIZE(_parent_names), \ .parents = _parents, \ - .flags = _flags, \ + .flags = _flags | CLK_IS_BASIC, \ } #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ @@ -103,9 +103,9 @@ struct clk { DEFINE_CLK(_name, clk_gate_ops, _flags, \ _name##_parent_names, _name##_parents); -#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ +#define _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ _flags, _reg, _shift, _width, \ - _divider_flags, _lock) \ + _divider_flags, _table, _lock) \ static struct clk _name; \ static const char *_name##_parent_names[] = { \ _parent_name, \ @@ -121,11 +121,27 @@ struct clk { .shift = _shift, \ .width = _width, \ .flags = _divider_flags, \ + .table = _table, \ .lock = _lock, \ }; \ DEFINE_CLK(_name, clk_divider_ops, _flags, \ _name##_parent_names, _name##_parents); +#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _lock) \ + _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, NULL, _lock) + +#define DEFINE_CLK_DIVIDER_TABLE(_name, _parent_name, \ + _parent_ptr, _flags, _reg, \ + _shift, _width, _divider_flags, \ + _table, _lock) \ + _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _table, _lock) \ + #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ _reg, _shift, _width, \ _mux_flags, _lock) \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 4a0b483986c..77335fac943 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -25,6 +25,7 @@ #define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ +#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ struct clk_hw; @@ -143,7 +144,7 @@ struct clk_init_data { */ struct clk_hw { struct clk *clk; - struct clk_init_data *init; + const struct clk_init_data *init; }; /* @@ -171,6 +172,8 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate); +void of_fixed_clk_setup(struct device_node *np); + /** * struct clk_gate - gating clock * @@ -203,6 +206,11 @@ struct clk *clk_register_gate(struct device *dev, const char *name, void __iomem *reg, u8 bit_idx, u8 clk_gate_flags, spinlock_t *lock); +struct clk_div_table { + unsigned int val; + unsigned int div; +}; + /** * struct clk_divider - adjustable divider clock * @@ -210,6 +218,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name, * @reg: register containing the divider * @shift: shift to the divider bit field * @width: width of the divider bit field + * @table: array of value/divider pairs, last entry should have div = 0 * @lock: register lock * * Clock with an adjustable divider affecting its output frequency. Implements @@ -229,6 +238,7 @@ struct clk_divider { u8 shift; u8 width; u8 flags; + const struct clk_div_table *table; spinlock_t *lock; }; @@ -240,6 +250,11 @@ struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags, spinlock_t *lock); +struct clk *clk_register_divider_table(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, const struct clk_div_table *table, + spinlock_t *lock); /** * struct clk_mux - multiplexer clock @@ -334,5 +349,19 @@ void __clk_unprepare(struct clk *clk); void __clk_reparent(struct clk *clk, struct clk *new_parent); unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); +struct of_device_id; + +typedef void (*of_clk_init_cb_t)(struct device_node *); + +int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data); +void of_clk_del_provider(struct device_node *np); +struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, + void *data); +const char *of_clk_get_parent_name(struct device_node *np, int index); +void of_clk_init(const struct of_device_id *matches); + #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index ad5c43e8ae8..2fd6a423453 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -12,6 +12,7 @@ #ifndef __LINUX_CLK_H #define __LINUX_CLK_H +#include <linux/err.h> #include <linux/kernel.h> #include <linux/notifier.h> @@ -86,7 +87,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); /** * clk_get - lookup and obtain a reference to a clock producer. * @dev: device for clock "consumer" - * @id: clock comsumer ID + * @id: clock consumer ID * * Returns a struct clk corresponding to the clock producer, or * valid IS_ERR() condition containing errno. The implementation @@ -103,7 +104,7 @@ struct clk *clk_get(struct device *dev, const char *id); /** * devm_clk_get - lookup and obtain a managed reference to a clock producer. * @dev: device for clock "consumer" - * @id: clock comsumer ID + * @id: clock consumer ID * * Returns a struct clk corresponding to the clock producer, or * valid IS_ERR() condition containing errno. The implementation @@ -310,4 +311,23 @@ struct clk *clk_get_sys(const char *dev_id, const char *con_id); int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, struct device *dev); +struct device_node; +struct of_phandle_args; + +#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) +struct clk *of_clk_get(struct device_node *np, int index); +struct clk *of_clk_get_by_name(struct device_node *np, const char *name); +struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); +#else +static inline struct clk *of_clk_get(struct device_node *np, int index) +{ + return ERR_PTR(-ENOENT); +} +static inline struct clk *of_clk_get_by_name(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOENT); +} +#endif + #endif diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 2e9b9ebbeb7..ce7a074f251 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -73,8 +73,9 @@ enum { /* migration should happen before other stuff but after perf */ CPU_PRI_PERF = 20, CPU_PRI_MIGRATION = 10, - /* prepare workqueues for other notifiers */ - CPU_PRI_WORKQUEUE = 5, + /* bring up workqueues before normal notifiers and down after */ + CPU_PRI_WORKQUEUE_UP = 5, + CPU_PRI_WORKQUEUE_DOWN = -5, }; #define CPU_ONLINE 0x0002 /* CPU (unsigned)v is up */ diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h index 473771a528c..ac3bbb5b950 100644 --- a/include/linux/cpu_rmap.h +++ b/include/linux/cpu_rmap.h @@ -1,3 +1,6 @@ +#ifndef __LINUX_CPU_RMAP_H +#define __LINUX_CPU_RMAP_H + /* * cpu_rmap.c: CPU affinity reverse-map support * Copyright 2011 Solarflare Communications Inc. @@ -71,3 +74,4 @@ extern void free_irq_cpu_rmap(struct cpu_rmap *rmap); extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq); #endif +#endif /* __LINUX_CPU_RMAP_H */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 5ab7183313c..040b13b5c14 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -34,6 +34,7 @@ struct cpuidle_driver; struct cpuidle_state_usage { void *driver_data; + unsigned long long disable; unsigned long long usage; unsigned long long time; /* in US */ }; @@ -46,7 +47,7 @@ struct cpuidle_state { unsigned int exit_latency; /* in US */ int power_usage; /* in mW */ unsigned int target_residency; /* in US */ - unsigned int disable; + bool disabled; /* disabled on all CPUs */ int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -143,13 +144,17 @@ struct cpuidle_driver { extern void disable_cpuidle(void); extern int cpuidle_idle_call(void); extern int cpuidle_register_driver(struct cpuidle_driver *drv); -struct cpuidle_driver *cpuidle_get_driver(void); +extern struct cpuidle_driver *cpuidle_get_driver(void); +extern struct cpuidle_driver *cpuidle_driver_ref(void); +extern void cpuidle_driver_unref(void); extern void cpuidle_unregister_driver(struct cpuidle_driver *drv); extern int cpuidle_register_device(struct cpuidle_device *dev); extern void cpuidle_unregister_device(struct cpuidle_device *dev); extern void cpuidle_pause_and_lock(void); extern void cpuidle_resume_and_unlock(void); +extern void cpuidle_pause(void); +extern void cpuidle_resume(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); extern int cpuidle_wrap_enter(struct cpuidle_device *dev, @@ -164,6 +169,8 @@ static inline int cpuidle_idle_call(void) { return -ENODEV; } static inline int cpuidle_register_driver(struct cpuidle_driver *drv) {return -ENODEV; } static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; } +static inline struct cpuidle_driver *cpuidle_driver_ref(void) {return NULL; } +static inline void cpuidle_driver_unref(void) {} static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { } static inline int cpuidle_register_device(struct cpuidle_device *dev) {return -ENODEV; } @@ -171,6 +178,8 @@ static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { } static inline void cpuidle_pause_and_lock(void) { } static inline void cpuidle_resume_and_unlock(void) { } +static inline void cpuidle_pause(void) { } +static inline void cpuidle_resume(void) { } static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } @@ -213,14 +222,7 @@ struct cpuidle_governor { extern int cpuidle_register_governor(struct cpuidle_governor *gov); extern void cpuidle_unregister_governor(struct cpuidle_governor *gov); -#ifdef CONFIG_INTEL_IDLE -extern int intel_idle_cpu_init(int cpu); #else -static inline int intel_idle_cpu_init(int cpu) { return -1; } -#endif - -#else -static inline int intel_idle_cpu_init(int cpu) { return -1; } static inline int cpuidle_register_governor(struct cpuidle_governor *gov) {return 0;} diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 668f66baac7..838320fc3d1 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -20,7 +20,7 @@ extern int number_of_cpusets; /* How many cpusets are defined in system? */ extern int cpuset_init(void); extern void cpuset_init_smp(void); -extern void cpuset_update_active_cpus(void); +extern void cpuset_update_active_cpus(bool cpu_online); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); extern void cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); @@ -124,7 +124,7 @@ static inline void set_mems_allowed(nodemask_t nodemask) static inline int cpuset_init(void) { return 0; } static inline void cpuset_init_smp(void) {} -static inline void cpuset_update_active_cpus(void) +static inline void cpuset_update_active_cpus(bool cpu_online) { partition_sched_domains(1, NULL, NULL); } diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 094789ff3e9..caa34e50537 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -128,7 +128,7 @@ struct dentry { struct rcu_head d_rcu; } d_u; struct list_head d_subdirs; /* our children */ - struct list_head d_alias; /* inode alias list */ + struct hlist_node d_alias; /* inode alias list */ }; /* @@ -144,7 +144,7 @@ enum dentry_d_lock_class }; struct dentry_operations { - int (*d_revalidate)(struct dentry *, struct nameidata *); + int (*d_revalidate)(struct dentry *, unsigned int); int (*d_hash)(const struct dentry *, const struct inode *, struct qstr *); int (*d_compare)(const struct dentry *, const struct inode *, diff --git a/include/linux/device.h b/include/linux/device.h index 6de94151ff6..52a5f15a222 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -36,6 +36,7 @@ struct subsys_private; struct bus_type; struct device_node; struct iommu_ops; +struct iommu_group; struct bus_attribute { struct attribute attr; @@ -687,8 +688,14 @@ struct device { const struct attribute_group **groups; /* optional groups */ void (*release)(struct device *dev); + struct iommu_group *iommu_group; }; +static inline struct device *kobj_to_dev(struct kobject *kobj) +{ + return container_of(kobj, struct device, kobj); +} + /* Get the wakeup routines, which depend on struct device */ #include <linux/pm_wakeup.h> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 56377df3912..9c02a4508b2 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -338,6 +338,9 @@ enum dma_slave_buswidth { * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill * with 'true' if peripheral should be flow controller. Direction will be * selected at Runtime. + * @slave_id: Slave requester id. Only valid for slave channels. The dma + * slave peripheral will have unique id as dma requester which need to be + * pass as slave config. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -365,6 +368,7 @@ struct dma_slave_config { u32 src_maxburst; u32 dst_maxburst; bool device_fc; + unsigned int slave_id; }; static inline const char *dma_chan_name(struct dma_chan *chan) @@ -670,6 +674,12 @@ static inline int dmaengine_resume(struct dma_chan *chan) return dmaengine_device_control(chan, DMA_RESUME, 0); } +static inline enum dma_status dmaengine_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + return chan->device->device_tx_status(chan, cookie, state); +} + static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) { return desc->tx_submit(desc); diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h index 07261d52a6d..1148575fd13 100644 --- a/include/linux/dw_apb_timer.h +++ b/include/linux/dw_apb_timer.h @@ -53,4 +53,5 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs); cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs); void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs); +extern struct sys_timer dw_apb_timer; #endif /* __DW_APB_TIMER_H__ */ diff --git a/include/linux/efi.h b/include/linux/efi.h index ec45ccd8708..103adc6d7e3 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -503,8 +503,6 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -extern unsigned long efi_get_time(void); -extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 3d406e0ede6..d426336d92d 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -124,17 +124,30 @@ static inline bool is_valid_ether_addr(const u8 *addr) } /** - * random_ether_addr - Generate software assigned random Ethernet address + * eth_random_addr - Generate software assigned random Ethernet address * @addr: Pointer to a six-byte array containing the Ethernet address * * Generate a random Ethernet address (MAC) that is not multicast * and has the local assigned bit set. */ -static inline void random_ether_addr(u8 *addr) +static inline void eth_random_addr(u8 *addr) { - get_random_bytes (addr, ETH_ALEN); - addr [0] &= 0xfe; /* clear multicast bit */ - addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + +#define random_ether_addr(addr) eth_random_addr(addr) + +/** + * eth_broadcast_addr - Assign broadcast address + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Assign the broadcast address to the given address array. + */ +static inline void eth_broadcast_addr(u8 *addr) +{ + memset(addr, 0xff, ETH_ALEN); } /** @@ -149,7 +162,7 @@ static inline void random_ether_addr(u8 *addr) static inline void eth_hw_addr_random(struct net_device *dev) { dev->addr_assign_type |= NET_ADDR_RANDOM; - random_ether_addr(dev->dev_addr); + eth_random_addr(dev->dev_addr); } /** diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index e17fa714058..21eff418091 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -137,6 +137,35 @@ struct ethtool_eeprom { }; /** + * struct ethtool_eee - Energy Efficient Ethernet information + * @cmd: ETHTOOL_{G,S}EEE + * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations + * for which there is EEE support. + * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations + * advertised as eee capable. + * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex + * combinations advertised by the link partner as eee capable. + * @eee_active: Result of the eee auto negotiation. + * @eee_enabled: EEE configured mode (enabled/disabled). + * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given + * that eee was negotiated. + * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting + * its tx lpi (after reaching 'idle' state). Effective only when eee + * was negotiated and tx_lpi_enabled was set. + */ +struct ethtool_eee { + __u32 cmd; + __u32 supported; + __u32 advertised; + __u32 lp_advertised; + __u32 eee_active; + __u32 eee_enabled; + __u32 tx_lpi_enabled; + __u32 tx_lpi_timer; + __u32 reserved[2]; +}; + +/** * struct ethtool_modinfo - plugin module eeprom information * @cmd: %ETHTOOL_GMODULEINFO * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx @@ -945,6 +974,8 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) * @get_module_info: Get the size and type of the eeprom contained within * a plug-in module. * @get_module_eeprom: Get the eeprom information from the plug-in module + * @get_eee: Get Energy-Efficient (EEE) supported and status. + * @set_eee: Set EEE status (enable/disable) as well as LPI timers. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must @@ -1011,6 +1042,8 @@ struct ethtool_ops { struct ethtool_modinfo *); int (*get_module_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); + int (*get_eee)(struct net_device *, struct ethtool_eee *); + int (*set_eee)(struct net_device *, struct ethtool_eee *); }; @@ -1089,6 +1122,8 @@ struct ethtool_ops { #define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ #define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ #define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -1118,6 +1153,10 @@ struct ethtool_ops { #define SUPPORTED_10000baseR_FEC (1 << 20) #define SUPPORTED_20000baseMLD2_Full (1 << 21) #define SUPPORTED_20000baseKR2_Full (1 << 22) +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -1143,6 +1182,10 @@ struct ethtool_ops { #define ADVERTISED_10000baseR_FEC (1 << 20) #define ADVERTISED_20000baseMLD2_Full (1 << 21) #define ADVERTISED_20000baseKR2_Full (1 << 22) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the diff --git a/include/linux/extcon/extcon_gpio.h b/include/linux/extcon/extcon_gpio.h index a2129b73dcb..2d8307f7d67 100644 --- a/include/linux/extcon/extcon_gpio.h +++ b/include/linux/extcon/extcon_gpio.h @@ -31,7 +31,7 @@ * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW). * @state_on print_state is overriden with state_on if attached. If Null, * default method of extcon class is used. - * @state_off print_state is overriden with state_on if dettached. If Null, + * @state_off print_state is overriden with state_on if detached. If Null, * default method of extcon class is used. * * Note that in order for state_on or state_off to be valid, both state_on diff --git a/include/linux/file.h b/include/linux/file.h index 58bf158c53d..a22408bac0d 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -39,4 +39,7 @@ extern void put_unused_fd(unsigned int fd); extern void fd_install(unsigned int fd, struct file *file); +extern void flush_delayed_fput(void); +extern void __fput_sync(struct file *); + #endif /* __LINUX_FILE_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 17fd887c798..8fabb037a48 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -826,7 +826,7 @@ struct inode { struct list_head i_lru; /* inode LRU list */ struct list_head i_sb_list; union { - struct list_head i_dentry; + struct hlist_head i_dentry; struct rcu_head i_rcu; }; u64 i_version; @@ -1571,7 +1571,7 @@ extern void unlock_super(struct super_block *); /* * VFS helper functions.. */ -extern int vfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *); +extern int vfs_create(struct inode *, struct dentry *, umode_t, bool); extern int vfs_mkdir(struct inode *, struct dentry *, umode_t); extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t); extern int vfs_symlink(struct inode *, struct dentry *, const char *); @@ -1666,7 +1666,7 @@ struct file_operations { }; struct inode_operations { - struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); void * (*follow_link) (struct dentry *, struct nameidata *); int (*permission) (struct inode *, int); struct posix_acl * (*get_acl)(struct inode *, int); @@ -1674,7 +1674,7 @@ struct inode_operations { int (*readlink) (struct dentry *, char __user *,int); void (*put_link) (struct dentry *, struct nameidata *, void *); - int (*create) (struct inode *,struct dentry *,umode_t,struct nameidata *); + int (*create) (struct inode *,struct dentry *, umode_t, bool); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); @@ -1693,6 +1693,9 @@ struct inode_operations { int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); int (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, + struct file *, unsigned open_flag, + umode_t create_mode, int *opened); } ____cacheline_aligned; struct seq_file; @@ -1911,7 +1914,7 @@ void free_anon_bdev(dev_t); struct super_block *sget(struct file_system_type *type, int (*test)(struct super_block *,void *), int (*set)(struct super_block *,void *), - void *data); + int flags, void *data); extern struct dentry *mount_pseudo(struct file_system_type *, char *, const struct super_operations *ops, const struct dentry_operations *dops, @@ -2057,10 +2060,17 @@ extern long do_sys_open(int dfd, const char __user *filename, int flags, extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int); -extern struct file * dentry_open(struct dentry *, struct vfsmount *, int, - const struct cred *); +extern struct file * dentry_open(const struct path *, int, const struct cred *); extern int filp_close(struct file *, fl_owner_t id); extern char * getname(const char __user *); +enum { + FILE_CREATED = 1, + FILE_OPENED = 2 +}; +extern int finish_open(struct file *file, struct dentry *dentry, + int (*open)(struct inode *, struct file *), + int *opened); +extern int finish_no_open(struct file *file, struct dentry *dentry); /* fs/ioctl.c */ @@ -2091,6 +2101,7 @@ extern sector_t blkdev_max_block(struct block_device *bdev); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern void invalidate_bdev(struct block_device *); +extern void iterate_bdevs(void (*)(struct block_device *, void *), void *); extern int sync_blockdev(struct block_device *bdev); extern void kill_bdev(struct block_device *); extern struct super_block *freeze_bdev(struct block_device *); @@ -2112,6 +2123,10 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb) { return 0; } + +static inline void iterate_bdevs(void (*f)(struct block_device *, void *), void *arg) +{ +} #endif extern int sync_filesystem(struct super_block *); extern const struct file_operations def_blk_fops; @@ -2438,7 +2453,7 @@ extern loff_t noop_llseek(struct file *file, loff_t offset, int origin); extern loff_t no_llseek(struct file *file, loff_t offset, int origin); extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin); extern loff_t generic_file_llseek_size(struct file *file, loff_t offset, - int origin, loff_t maxsize); + int origin, loff_t maxsize, loff_t eof); extern int generic_file_open(struct inode * inode, struct file * filp); extern int nonseekable_open(struct inode * inode, struct file * filp); @@ -2560,7 +2575,7 @@ extern int simple_write_end(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata); -extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *); +extern struct dentry *simple_lookup(struct inode *, struct dentry *, unsigned int flags); extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *); extern const struct file_operations simple_dir_operations; extern const struct inode_operations simple_dir_inode_operations; diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 176a939d154..af961d6f7ab 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -65,7 +65,7 @@ struct trace_iterator { void *private; int cpu_file; struct mutex mutex; - struct ring_buffer_iter *buffer_iter[NR_CPUS]; + struct ring_buffer_iter **buffer_iter; unsigned long iter_flags; /* trace_seq for __print_flags() and __print_symbolic() etc. */ @@ -207,6 +207,9 @@ struct ftrace_event_call { * bit 1: enabled * bit 2: filter_active * bit 3: enabled cmd record + * bit 4: allow trace by non root (cap any) + * bit 5: failed to apply filter + * bit 6: ftrace internal event (do not enable) * * Changes to flags must hold the event_mutex. * diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 7a114016ac7..5ab61c1eb6b 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -85,7 +85,7 @@ enum { /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); extern void genl_unlock(void); -#ifdef CONFIG_PROVE_LOCKING +#ifdef CONFIG_LOCKDEP extern int lockdep_genl_is_held(void); #endif diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 017a7fb5a1f..ae0aaa9d42f 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -16,7 +16,6 @@ #ifdef CONFIG_BLOCK -#define kobj_to_dev(k) container_of((k), struct device, kobj) #define dev_to_disk(device) container_of((device), struct gendisk, part0.__dev) #define dev_to_part(device) container_of((device), struct hd_struct, __dev) #define disk_to_dev(disk) (&(disk)->part0.__dev) diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index fa98bdb073b..b2de1f9a88d 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -170,6 +170,16 @@ struct gfs2_rindex { #define GFS2_RGF_NOALLOC 0x00000008 #define GFS2_RGF_TRIMMED 0x00000010 +struct gfs2_rgrp_lvb { + __be32 rl_magic; + __be32 rl_flags; + __be32 rl_free; + __be32 rl_dinodes; + __be64 rl_igeneration; + __be32 rl_unlinked; + __be32 __pad; +}; + struct gfs2_rgrp { struct gfs2_meta_header rg_header; @@ -214,6 +224,7 @@ enum { gfs2fl_NoAtime = 7, gfs2fl_Sync = 8, gfs2fl_System = 9, + gfs2fl_TopLevel = 10, gfs2fl_TruncInProg = 29, gfs2fl_InheritDirectio = 30, gfs2fl_InheritJdata = 31, @@ -230,8 +241,9 @@ enum { #define GFS2_DIF_NOATIME 0x00000080 #define GFS2_DIF_SYNC 0x00000100 #define GFS2_DIF_SYSTEM 0x00000200 /* New in gfs2 */ +#define GFS2_DIF_TOPDIR 0x00000400 /* New in gfs2 */ #define GFS2_DIF_TRUNC_IN_PROG 0x20000000 /* New in gfs2 */ -#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 +#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 /* only in gfs1 */ #define GFS2_DIF_INHERIT_JDATA 0x80000000 struct gfs2_dinode { diff --git a/include/linux/hid.h b/include/linux/hid.h index 449fa385703..42970de1b40 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -200,6 +200,7 @@ struct hid_item { #define HID_UP_DIGITIZER 0x000d0000 #define HID_UP_PID 0x000f0000 #define HID_UP_HPVENDOR 0xff7f0000 +#define HID_UP_HPVENDOR2 0xff010000 #define HID_UP_MSVENDOR 0xff000000 #define HID_UP_CUSTOM 0x00ff0000 #define HID_UP_LOGIVENDOR 0xffbc0000 diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ddfa04108ba..1d0fe4877b1 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -425,6 +425,8 @@ void i2c_unlock_adapter(struct i2c_adapter *); #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ /* Must equal I2C_M_TEN below */ #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ +#define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */ + /* Must match I2C_M_STOP|IGNORE_NAK */ /* i2c adapter classes (bitmask) */ #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ @@ -541,6 +543,7 @@ struct i2c_msg { __u16 flags; #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ #define I2C_M_RD 0x0001 /* read data, from slave to master */ +#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ diff --git a/include/linux/i2c/mms114.h b/include/linux/i2c/mms114.h new file mode 100644 index 00000000000..5722ebfb273 --- /dev/null +++ b/include/linux/i2c/mms114.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundationr + */ + +#ifndef __LINUX_MMS114_H +#define __LINUX_MMS114_H + +struct mms114_platform_data { + unsigned int x_size; + unsigned int y_size; + unsigned int contact_threshold; + unsigned int moving_threshold; + bool x_invert; + bool y_invert; + + void (*cfg_pin)(bool); +}; + +#endif /* __LINUX_MMS114_H */ diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h index 139ba52667c..3c98dd4f901 100644 --- a/include/linux/i2c/pca953x.h +++ b/include/linux/i2c/pca953x.h @@ -11,7 +11,7 @@ struct pca953x_platform_data { unsigned gpio_base; /* initial polarity inversion setting */ - uint16_t invert; + u32 invert; /* interrupt base */ int irq_base; diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 3993477103a..555382660bc 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -683,7 +683,6 @@ struct twl4030_audio_data { }; struct twl4030_platform_data { - unsigned irq_base, irq_end; struct twl4030_clock_init_data *clock; struct twl4030_bci_platform_data *bci; struct twl4030_gpio_platform_data *gpio; diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af891851..e02fc682bb6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -47,6 +47,7 @@ #define IEEE80211_FCTL_MOREDATA 0x2000 #define IEEE80211_FCTL_PROTECTED 0x4000 #define IEEE80211_FCTL_ORDER 0x8000 +#define IEEE80211_FCTL_CTL_EXT 0x0f00 #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 @@ -54,6 +55,7 @@ #define IEEE80211_FTYPE_MGMT 0x0000 #define IEEE80211_FTYPE_CTL 0x0004 #define IEEE80211_FTYPE_DATA 0x0008 +#define IEEE80211_FTYPE_EXT 0x000c /* management */ #define IEEE80211_STYPE_ASSOC_REQ 0x0000 @@ -70,6 +72,7 @@ #define IEEE80211_STYPE_ACTION 0x00D0 /* control */ +#define IEEE80211_STYPE_CTL_EXT 0x0060 #define IEEE80211_STYPE_BACK_REQ 0x0080 #define IEEE80211_STYPE_BACK 0x0090 #define IEEE80211_STYPE_PSPOLL 0x00A0 @@ -97,6 +100,18 @@ #define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 #define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 +/* extension, added by 802.11ad */ +#define IEEE80211_STYPE_DMG_BEACON 0x0000 + +/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ +#define IEEE80211_CTL_EXT_POLL 0x2000 +#define IEEE80211_CTL_EXT_SPR 0x3000 +#define IEEE80211_CTL_EXT_GRANT 0x4000 +#define IEEE80211_CTL_EXT_DMG_CTS 0x5000 +#define IEEE80211_CTL_EXT_DMG_DTS 0x6000 +#define IEEE80211_CTL_EXT_SSW 0x8000 +#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000 +#define IEEE80211_CTL_EXT_SSW_ACK 0xa000 /* miscellaneous IEEE 802.11 constants */ #define IEEE80211_MAX_FRAG_THRESHOLD 2352 @@ -568,6 +583,26 @@ struct ieee80211s_hdr { #define MESH_FLAGS_PS_DEEP 0x4 /** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + +/** * struct ieee80211_quiet_ie * * This structure refers to "Quiet information element" @@ -1072,6 +1107,73 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 +#define VHT_MCS_SUPPORTED_SET_SIZE 8 + +struct ieee80211_vht_capabilities { + __le32 vht_capabilities_info; + u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; +} __packed; + +struct ieee80211_vht_operation { + u8 vht_op_info_chwidth; + u8 vht_op_info_chan_center_freq_seg1_idx; + u8 vht_op_info_chan_center_freq_seg2_idx; + __le16 vht_basic_mcs_set; +} __packed; + +/** + * struct ieee80211_vht_mcs_info - VHT MCS information + * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams + * @rx_highest: Indicates highest long GI VHT PPDU data rate + * STA can receive. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams + * @tx_highest: Indicates highest long GI VHT PPDU data rate + * STA can transmit. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest TX data rate supported. + */ +struct ieee80211_vht_mcs_info { + __le16 rx_mcs_map; + __le16 rx_highest; + __le16 tx_mcs_map; + __le16 tx_highest; +} __packed; + +#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 +#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 +#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 +#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 + +/* 802.11ac VHT Capabilities */ +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1104,6 +1206,21 @@ struct ieee80211_ht_operation { #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) + +/* DMG (60gHz) 802.11ad */ +/* type - bits 0..1 */ +#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ +#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ +#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ + +#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) +#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) +#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) +#define WLAN_CAPABILITY_DMG_ECPAC (1<<5) + +#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12) + /* measurement */ #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) @@ -1113,7 +1230,6 @@ struct ieee80211_ht_operation { #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 - /* 802.11g ERP information element */ #define WLAN_ERP_NON_ERP_PRESENT (1<<0) #define WLAN_ERP_USE_PROTECTION (1<<1) @@ -1125,6 +1241,16 @@ enum { WLAN_ERP_PREAMBLE_LONG = 1, }; +/* Band ID, 802.11ad #8.4.1.45 */ +enum { + IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */ + IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */ + IEEE80211_BANDID_2G = 2, /* 2.4 GHz */ + IEEE80211_BANDID_3G = 3, /* 3.6 GHz */ + IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */ + IEEE80211_BANDID_60G = 5, /* 60 GHz */ +}; + /* Status codes */ enum ieee80211_statuscode { WLAN_STATUS_SUCCESS = 0, @@ -1176,6 +1302,17 @@ enum ieee80211_statuscode { WLAN_STATUS_ANTI_CLOG_REQUIRED = 76, WLAN_STATUS_FCG_NOT_SUPP = 78, WLAN_STATUS_STA_NO_TBTT = 78, + /* 802.11ad */ + WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39, + WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47, + WLAN_STATUS_REJECT_WITH_SCHEDULE = 83, + WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86, + WLAN_STATUS_PERFORMING_FST_NOW = 87, + WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88, + WLAN_STATUS_REJECT_U_PID_SETTING = 89, + WLAN_STATUS_REJECT_DSE_BAND = 96, + WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99, + WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103, }; @@ -1332,6 +1469,43 @@ enum ieee80211_eid { WLAN_EID_DSE_REGISTERED_LOCATION = 58, WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, WLAN_EID_EXT_CHANSWITCH_ANN = 60, + + WLAN_EID_VHT_CAPABILITY = 191, + WLAN_EID_VHT_OPERATION = 192, + + /* 802.11ad */ + WLAN_EID_NON_TX_BSSID_CAP = 83, + WLAN_EID_WAKEUP_SCHEDULE = 143, + WLAN_EID_EXT_SCHEDULE = 144, + WLAN_EID_STA_AVAILABILITY = 145, + WLAN_EID_DMG_TSPEC = 146, + WLAN_EID_DMG_AT = 147, + WLAN_EID_DMG_CAP = 148, + WLAN_EID_DMG_OPERATION = 151, + WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, + WLAN_EID_DMG_BEAM_REFINEMENT = 153, + WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154, + WLAN_EID_AWAKE_WINDOW = 157, + WLAN_EID_MULTI_BAND = 158, + WLAN_EID_ADDBA_EXT = 159, + WLAN_EID_NEXT_PCP_LIST = 160, + WLAN_EID_PCP_HANDOVER = 161, + WLAN_EID_DMG_LINK_MARGIN = 162, + WLAN_EID_SWITCHING_STREAM = 163, + WLAN_EID_SESSION_TRANSITION = 164, + WLAN_EID_DYN_TONE_PAIRING_REPORT = 165, + WLAN_EID_CLUSTER_REPORT = 166, + WLAN_EID_RELAY_CAP = 167, + WLAN_EID_RELAY_XFER_PARAM_SET = 168, + WLAN_EID_BEAM_LINK_MAINT = 169, + WLAN_EID_MULTIPLE_MAC_ADDR = 170, + WLAN_EID_U_PID = 171, + WLAN_EID_DMG_LINK_ADAPT_ACK = 172, + WLAN_EID_QUIET_PERIOD_REQ = 175, + WLAN_EID_QUIET_PERIOD_RESP = 177, + WLAN_EID_EPAC_POLICY = 182, + WLAN_EID_CLISTER_TIME_OFF = 183, + WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190, }; /* Action category code */ @@ -1348,7 +1522,10 @@ enum ieee80211_category { WLAN_CATEGORY_MESH_ACTION = 13, WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, + WLAN_CATEGORY_DMG = 16, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_FST = 18, + WLAN_CATEGORY_UNPROT_DMG = 20, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1443,7 +1620,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1632,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,13 +1644,35 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, IEEE80211_PATH_METRIC_VENDOR = 255, }; +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; /* * IEEE 802.11-2007 7.3.2.9 Country information element @@ -1574,6 +1773,7 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08 #define WLAN_CIPHER_SUITE_SMS4 0x00147201 @@ -1589,6 +1789,10 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_MICROSOFT 0x0050f2 +#define WLAN_OUI_TYPE_MICROSOFT_WPA 1 +#define WLAN_OUI_TYPE_MICROSOFT_WMM 2 +#define WLAN_OUI_TYPE_MICROSOFT_WPS 4 /* * WMM/802.11e Tspec Element diff --git a/include/linux/if.h b/include/linux/if.h index f995c663c49..1ec407b01e4 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -81,6 +81,8 @@ #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IFF_TEAM_PORT 0x40000 /* device used as team port */ #define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ +#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address + * change when it's running */ #define IF_GET_IFACE 0x0001 /* for querying only */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 56d907a2c80..167ce5b363d 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -105,7 +105,8 @@ #define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ #define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ #define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* Controller Area Network */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ #define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ #define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ #define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ diff --git a/include/linux/if_link.h b/include/linux/if_link.h index f715750d0b8..ac173bd2ab6 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -140,6 +140,8 @@ enum { IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ #define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, __IFLA_MAX }; diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h deleted file mode 100644 index 6526a623583..00000000000 --- a/include/linux/if_strip.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * if_strip.h -- - * - * Definitions for the STRIP interface - * - * Copyright 1996 The Board of Trustees of The Leland Stanford - * Junior University. All Rights Reserved. - * - * Permission to use, copy, modify, and distribute this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies. Stanford University - * makes no representations about the suitability of this - * software for any purpose. It is provided "as is" without - * express or implied warranty. - */ - -#ifndef __LINUX_STRIP_H -#define __LINUX_STRIP_H - -#include <linux/types.h> - -typedef struct { - __u8 c[6]; -} MetricomAddress; - -#endif diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 8185f57a9c7..6960fc1841a 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -13,6 +13,9 @@ #ifdef __KERNEL__ +#include <linux/netpoll.h> +#include <net/sch_generic.h> + struct team_pcpu_stats { u64 rx_packets; u64 rx_bytes; @@ -60,9 +63,54 @@ struct team_port { unsigned int mtu; } orig; - struct rcu_head rcu; +#ifdef CONFIG_NET_POLL_CONTROLLER + struct netpoll *np; +#endif + + long mode_priv[0]; }; +static inline bool team_port_enabled(struct team_port *port) +{ + return port->index != -1; +} + +static inline bool team_port_txable(struct team_port *port) +{ + return port->linkup && team_port_enabled(port); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ + struct netpoll *np = port->np; + + if (np) + netpoll_send_skb(np, skb); +} +#else +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ +} +#endif + +static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); + skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); + + skb->dev = port->dev; + if (unlikely(netpoll_tx_running(port->dev))) { + team_netpoll_send_skb(port, skb); + return 0; + } + return dev_queue_xmit(skb); +} + struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); @@ -73,6 +121,8 @@ struct team_mode_ops { int (*port_enter)(struct team *team, struct team_port *port); void (*port_leave)(struct team *team, struct team_port *port); void (*port_change_mac)(struct team *team, struct team_port *port); + void (*port_enabled)(struct team *team, struct team_port *port); + void (*port_disabled)(struct team *team, struct team_port *port); }; enum team_option_type { @@ -82,6 +132,11 @@ enum team_option_type { TEAM_OPTION_TYPE_BOOL, }; +struct team_option_inst_info { + u32 array_index; + struct team_port *port; /* != NULL if per-port */ +}; + struct team_gsetter_ctx { union { u32 u32_val; @@ -92,23 +147,28 @@ struct team_gsetter_ctx { } bin_val; bool bool_val; } data; - struct team_port *port; + struct team_option_inst_info *info; }; struct team_option { struct list_head list; const char *name; bool per_port; + unsigned int array_size; /* != 0 means the option is array */ enum team_option_type type; + int (*init)(struct team *team, struct team_option_inst_info *info); int (*getter)(struct team *team, struct team_gsetter_ctx *ctx); int (*setter)(struct team *team, struct team_gsetter_ctx *ctx); }; +extern void team_option_inst_set_change(struct team_option_inst_info *opt_inst_info); +extern void team_options_change_check(struct team *team); + struct team_mode { - struct list_head list; const char *kind; struct module *owner; size_t priv_size; + size_t port_priv_size; const struct team_mode_ops *ops; }; @@ -178,8 +238,11 @@ extern int team_options_register(struct team *team, extern void team_options_unregister(struct team *team, const struct team_option *option, size_t option_count); -extern int team_mode_register(struct team_mode *mode); -extern int team_mode_unregister(struct team_mode *mode); +extern int team_mode_register(const struct team_mode *mode); +extern void team_mode_unregister(const struct team_mode *mode); + +#define TEAM_DEFAULT_NUM_TX_QUEUES 16 +#define TEAM_DEFAULT_NUM_RX_QUEUES 16 #endif /* __KERNEL__ */ @@ -241,6 +304,7 @@ enum { TEAM_ATTR_OPTION_DATA, /* dynamic */ TEAM_ATTR_OPTION_REMOVED, /* flag */ TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ + TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ __TEAM_ATTR_OPTION_MAX, TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 16b92d008be..5efff60b6f5 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -80,4 +80,18 @@ enum { #define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) +/* VTI-mode i_flags */ +#define VTI_ISVTI 0x0001 + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index fb0fe46fd65..8ba516fc2ec 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -85,7 +85,7 @@ struct iio_buffer { /** * iio_buffer_init() - Initialize the buffer structure - * @buffer: buffer to be initialized + * @buffer: buffer to be initialized **/ void iio_buffer_init(struct iio_buffer *buffer); @@ -107,8 +107,9 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, /** * iio_scan_mask_set() - set particular bit in the scan mask - * @buffer: the buffer whose scan mask we are interested in - * @bit: the bit to be set. + * @indio_dev IIO device structure + * @buffer: the buffer whose scan mask we are interested in + * @bit: the bit to be set. **/ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); @@ -116,8 +117,8 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, /** * iio_push_to_buffer() - push to a registered buffer. * @buffer: IIO buffer structure for device - * @scan: Full scan. - * @timestamp: + * @data: the data to push to the buffer + * @timestamp: timestamp to associate with the data */ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, s64 timestamp); @@ -126,7 +127,9 @@ int iio_update_demux(struct iio_dev *indio_dev); /** * iio_buffer_register() - register the buffer with IIO core - * @indio_dev: device with the buffer to be registered + * @indio_dev: device with the buffer to be registered + * @channels: the channel descriptions used to construct buffer + * @num_channels: the number of channels **/ int iio_buffer_register(struct iio_dev *indio_dev, const struct iio_chan_spec *channels, @@ -134,7 +137,7 @@ int iio_buffer_register(struct iio_dev *indio_dev, /** * iio_buffer_unregister() - unregister the buffer from IIO core - * @indio_dev: the device with the buffer to be unregistered + * @indio_dev: the device with the buffer to be unregistered **/ void iio_buffer_unregister(struct iio_dev *indio_dev); @@ -174,6 +177,9 @@ ssize_t iio_buffer_show_enable(struct device *dev, int iio_sw_buffer_preenable(struct iio_dev *indio_dev); +bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, + const unsigned long *mask); + #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, @@ -184,7 +190,7 @@ static inline int iio_buffer_register(struct iio_dev *indio_dev, } static inline void iio_buffer_unregister(struct iio_dev *indio_dev) -{}; +{} #endif /* CONFIG_IIO_BUFFER */ diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 1a15e560a5a..e2657e6d4d2 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -33,17 +33,17 @@ struct iio_channel { * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -struct iio_channel *iio_st_channel_get(const char *name, - const char *consumer_channel); +struct iio_channel *iio_channel_get(const char *name, + const char *consumer_channel); /** - * iio_st_channel_release() - release channels obtained via iio_st_channel_get + * iio_channel_release() - release channels obtained via iio_channel_get * @chan: The channel to be released. */ -void iio_st_channel_release(struct iio_channel *chan); +void iio_channel_release(struct iio_channel *chan); /** - * iio_st_channel_get_all() - get all channels associated with a client + * iio_channel_get_all() - get all channels associated with a client * @name: name of consumer device. * * Returns an array of iio_channel structures terminated with one with @@ -51,37 +51,37 @@ void iio_st_channel_release(struct iio_channel *chan); * This function is used by fairly generic consumers to get all the * channels registered as having this consumer. */ -struct iio_channel *iio_st_channel_get_all(const char *name); +struct iio_channel *iio_channel_get_all(const char *name); /** - * iio_st_channel_release_all() - reverse iio_st_get_all + * iio_channel_release_all() - reverse iio_channel_get_all * @chan: Array of channels to be released. */ -void iio_st_channel_release_all(struct iio_channel *chan); +void iio_channel_release_all(struct iio_channel *chan); /** - * iio_st_read_channel_raw() - read from a given channel + * iio_read_channel_raw() - read from a given channel * @channel: The channel being queried. * @val: Value read back. * * Note raw reads from iio channels are in adc counts and hence * scale will need to be applied if standard units required. */ -int iio_st_read_channel_raw(struct iio_channel *chan, - int *val); +int iio_read_channel_raw(struct iio_channel *chan, + int *val); /** - * iio_st_get_channel_type() - get the type of a channel + * iio_get_channel_type() - get the type of a channel * @channel: The channel being queried. * @type: The type of the channel. * * returns the enum iio_chan_type of the channel */ -int iio_st_get_channel_type(struct iio_channel *channel, - enum iio_chan_type *type); +int iio_get_channel_type(struct iio_channel *channel, + enum iio_chan_type *type); /** - * iio_st_read_channel_scale() - read the scale value for a channel + * iio_read_channel_scale() - read the scale value for a channel * @channel: The channel being queried. * @val: First part of value read back. * @val2: Second part of value read back. @@ -90,7 +90,7 @@ int iio_st_get_channel_type(struct iio_channel *channel, * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val * + val2/1e6 */ -int iio_st_read_channel_scale(struct iio_channel *chan, int *val, - int *val2); +int iio_read_channel_scale(struct iio_channel *chan, int *val, + int *val2); #endif diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h new file mode 100644 index 00000000000..8fd8f057a89 --- /dev/null +++ b/include/linux/iio/dac/ad5421.h @@ -0,0 +1,28 @@ +#ifndef __IIO_DAC_AD5421_H__ +#define __IIO_DAC_AD5421_H__ + +/** + * enum ad5421_current_range - Current range the AD5421 is configured for. + * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00) + * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1) + * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10) + */ + +enum ad5421_current_range { + AD5421_CURRENT_RANGE_4mA_20mA, + AD5421_CURRENT_RANGE_3mA8_21mA, + AD5421_CURRENT_RANGE_3mA2_24mA, +}; + +/** + * struct ad5421_platform_data - AD5421 DAC driver platform data + * @external_vref: whether an external reference voltage is used or not + * @current_range: Current range the AD5421 is configured for + */ + +struct ad5421_platform_data { + bool external_vref; + enum ad5421_current_range current_range; +}; + +#endif diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h new file mode 100644 index 00000000000..43895376a9c --- /dev/null +++ b/include/linux/iio/dac/ad5504.h @@ -0,0 +1,16 @@ +/* + * AD5504 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5504_H_ +#define SPI_AD5504_H_ + +struct ad5504_platform_data { + u16 vref_mv; +}; + +#endif /* SPI_AD5504_H_ */ diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h new file mode 100644 index 00000000000..45ee281c666 --- /dev/null +++ b/include/linux/iio/dac/ad5791.h @@ -0,0 +1,25 @@ +/* + * AD5791 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5791_H_ +#define SPI_AD5791_H_ + +/** + * struct ad5791_platform_data - platform specific information + * @vref_pos_mv: Vdd Positive Analog Supply Volatge (mV) + * @vref_neg_mv: Vdd Negative Analog Supply Volatge (mV) + * @use_rbuf_gain2: ext. amplifier connected in gain of two configuration + */ + +struct ad5791_platform_data { + u16 vref_pos_mv; + u16 vref_neg_mv; + bool use_rbuf_gain2; +}; + +#endif /* SPI_AD5791_H_ */ diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h new file mode 100644 index 00000000000..f6d1d252f08 --- /dev/null +++ b/include/linux/iio/dac/max517.h @@ -0,0 +1,15 @@ +/* + * MAX517 DAC driver + * + * Copyright 2011 Roland Stigge <stigge@antcom.de> + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_DAC_MAX517_H_ +#define IIO_DAC_MAX517_H_ + +struct max517_platform_data { + u16 vref_mv[2]; +}; + +#endif /* IIO_DAC_MAX517_H_ */ diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h new file mode 100644 index 00000000000..91530e6611e --- /dev/null +++ b/include/linux/iio/dac/mcp4725.h @@ -0,0 +1,16 @@ +/* + * MCP4725 DAC driver + * + * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef IIO_DAC_MCP4725_H_ +#define IIO_DAC_MCP4725_H_ + +struct mcp4725_platform_data { + u16 vref_mv; +}; + +#endif /* IIO_DAC_MCP4725_H_ */ diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h index b5acbf93c5d..13ce220c700 100644 --- a/include/linux/iio/events.h +++ b/include/linux/iio/events.h @@ -46,7 +46,7 @@ enum iio_event_direction { * @diff: Whether the event is for an differential channel or not. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. * @direction: Direction of the event. One of enum iio_event_direction. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @chan: Channel number for non-differential channels. * @chan1: First channel number for differential channels. * @chan2: Second channel number for differential channels. @@ -69,7 +69,7 @@ enum iio_event_direction { * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ @@ -81,7 +81,7 @@ enum iio_event_direction { * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 00000000000..12ce3ee427f --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h new file mode 100644 index 00000000000..b76b4a87065 --- /dev/null +++ b/include/linux/iio/frequency/adf4350.h @@ -0,0 +1,126 @@ +/* + * ADF4350/ADF4351 SPI PLL driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_PLL_ADF4350_H_ +#define IIO_PLL_ADF4350_H_ + +/* Registers */ +#define ADF4350_REG0 0 +#define ADF4350_REG1 1 +#define ADF4350_REG2 2 +#define ADF4350_REG3 3 +#define ADF4350_REG4 4 +#define ADF4350_REG5 5 + +/* REG0 Bit Definitions */ +#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15) + +/* REG1 Bit Definitions */ +#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15) +#define ADF4350_REG1_PRESCALER (1 << 27) + +/* REG2 Bit Definitions */ +#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3) +#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4) +#define ADF4350_REG2_POWER_DOWN_EN (1 << 5) +#define ADF4350_REG2_PD_POLARITY_POS (1 << 6) +#define ADF4350_REG2_LDP_6ns (1 << 7) +#define ADF4350_REG2_LDP_10ns (0 << 7) +#define ADF4350_REG2_LDF_FRACT_N (0 << 8) +#define ADF4350_REG2_LDF_INT_N (1 << 8) +#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9) +#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13) +#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14) +#define ADF4350_REG2_RDIV2_EN (1 << 24) +#define ADF4350_REG2_RMULT2_EN (1 << 25) +#define ADF4350_REG2_MUXOUT(x) ((x) << 26) +#define ADF4350_REG2_NOISE_MODE(x) ((x) << 29) +#define ADF4350_MUXOUT_THREESTATE 0 +#define ADF4350_MUXOUT_DVDD 1 +#define ADF4350_MUXOUT_GND 2 +#define ADF4350_MUXOUT_R_DIV_OUT 3 +#define ADF4350_MUXOUT_N_DIV_OUT 4 +#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5 +#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6 + +/* REG3 Bit Definitions */ +#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3) +#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16) +#define ADF4350_REG3_12BIT_CSR_EN (1 << 18) +#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21) +#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22) +#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23) + +/* REG4 Bit Definitions */ +#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3) +#define ADF4350_REG4_RF_OUT_EN (1 << 5) +#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6) +#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8) +#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9) +#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9) +#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10) +#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11) +#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12) +#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20) +#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23) +#define ADF4350_REG4_FEEDBACK_FUND (1 << 23) + +/* REG5 Bit Definitions */ +#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22) +#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22) +#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22) + +/* Specifications */ +#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */ +#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */ +#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */ +#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */ +#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ +#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ +#define ADF4350_MAX_MODULUS 4095 + +/** + * struct adf4350_platform_data - platform specific information + * @name: Optional device name. + * @clkin: REFin frequency in Hz. + * @channel_spacing: Channel spacing in Hz (influences MODULUS). + * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired + * frequency on probe. + * @ref_div_factor: Optional, if set the driver skips dynamic calculation + * and uses this default value instead. + * @ref_doubler_en: Enables reference doubler. + * @ref_div2_en: Enables reference divider. + * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2. + * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3. + * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4. + * @gpio_lock_detect: Optional, if set with a valid GPIO number, + * pll lock state is tested upon read. + * If not used - set to -1. + */ + +struct adf4350_platform_data { + char name[32]; + unsigned long clkin; + unsigned long channel_spacing; + unsigned long long power_up_frequency; + + unsigned short ref_div_factor; /* 10-bit R counter */ + bool ref_doubler_en; + bool ref_div2_en; + + unsigned r2_user_settings; + unsigned r3_user_settings; + unsigned r4_user_settings; + int gpio_lock_detect; +}; + +#endif /* IIO_PLL_ADF4350_H_ */ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3a4f6a3ab80..be82936c408 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -130,14 +130,78 @@ struct iio_chan_spec_ext_info { }; /** + * struct iio_enum - Enum channel info attribute + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. + * + * The iio_enum struct can be used to implement enum style channel attributes. + * Enum style attributes are those which have a set of strings which map to + * unsigned integer values. The IIO enum helper code takes care of mapping + * between value and string as well as generating a "_available" file which + * contains a list of all available items. The set callback will be called when + * the attribute is updated. The last parameter is the index to the newly + * activated item. The get callback will be used to query the currently active + * item and is supposed to return the index for it. + */ +struct iio_enum { + const char * const *items; + unsigned int num_items; + int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int); + int (*get)(struct iio_dev *, const struct iio_chan_spec *); +}; + +ssize_t iio_enum_available_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_write(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, const char *buf, + size_t len); + +/** + * IIO_ENUM() - Initialize enum extended channel attribute + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct + * + * This should usually be used together with IIO_ENUM_AVAILABLE() + */ +#define IIO_ENUM(_name, _shared, _e) \ +{ \ + .name = (_name), \ + .shared = (_shared), \ + .read = iio_enum_read, \ + .write = iio_enum_write, \ + .private = (uintptr_t)(_e), \ +} + +/** + * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct + * + * Creates a read only attribute which list all the available enum items in a + * space separated list. This should usually be used together with IIO_ENUM() + */ +#define IIO_ENUM_AVAILABLE(_name, _e) \ +{ \ + .name = (_name "_available"), \ + .shared = true, \ + .read = iio_enum_available_read, \ + .private = (uintptr_t)(_e), \ +} + +/** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. - * @channel: What number or name do we wish to assign the channel. + * @channel: What number do we wish to assign the channel. * @channel2: If there is a second number for a differential * channel then this is it. If modified is set then the * value here specifies the modifier. * @address: Driver specific identifier. - * @scan_index: Monotonic index to give ordering in scans when read + * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. * @scan_type: Sign: 's' or 'u' to specify signed or unsigned * realbits: Number of valid bits of data @@ -147,14 +211,14 @@ struct iio_chan_spec_ext_info { * endianness: little or big endian * @info_mask: What information is to be exported about this channel. * This includes calibbias, scale etc. - * @event_mask: What events can this channel produce. + * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should - * have it's name field set to NULL. + * have its name field set to NULL. * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. - * @datasheet_name: A name used in in kernel mapping of channels. It should + * @datasheet_name: A name used in in-kernel mapping of channels. It should * correspond to the first name that the channel is referred * to by in the datasheet (e.g. IND), or the nearest * possible compound name (e.g. IND-INC). @@ -163,9 +227,8 @@ struct iio_chan_spec_ext_info { * channel2. Examples are IIO_MOD_X for axial sensors about * the 'x' axis. * @indexed: Specify the channel has a numerical index. If not, - * the value in channel will be suppressed for attribute - * but not for event codes. Typically set it to 0 when - * the index is false. + * the channel index number will be suppressed for sysfs + * attributes but not for event codes. * @differential: Channel is differential. */ struct iio_chan_spec { @@ -300,12 +363,16 @@ struct iio_info { * @predisable: [DRIVER] function to run prior to marking buffer * disabled * @postdisable: [DRIVER] function to run after marking buffer disabled + * @validate_scan_mask: [DRIVER] function callback to check whether a given + * scan mask is valid for the device. */ struct iio_buffer_setup_ops { int (*preenable)(struct iio_dev *); int (*postenable)(struct iio_dev *); int (*predisable)(struct iio_dev *); int (*postdisable)(struct iio_dev *); + bool (*validate_scan_mask)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); }; /** @@ -329,7 +396,7 @@ struct iio_buffer_setup_ops { * @trig: [INTERN] current device trigger (buffer modes) * @pollfunc: [DRIVER] function run on trigger being received * @channels: [DRIVER] channel specification structure table - * @num_channels: [DRIVER] number of chanels specified in @channels. + * @num_channels: [DRIVER] number of channels specified in @channels. * @channel_attr_list: [INTERN] keep track of automatically created channel * attributes * @chan_attr_group: [INTERN] group for all attrs in base directory @@ -419,7 +486,7 @@ extern struct bus_type iio_bus_type; /** * iio_device_put() - reference counted deallocation of struct device - * @dev: the iio_device containing the device + * @indio_dev: IIO device structure containing the device **/ static inline void iio_device_put(struct iio_dev *indio_dev) { @@ -429,7 +496,7 @@ static inline void iio_device_put(struct iio_dev *indio_dev) /** * dev_to_iio_dev() - Get IIO device struct from a device struct - * @dev: The device embedded in the IIO device + * @dev: The device embedded in the IIO device * * Note: The device must be a IIO device, otherwise the result is undefined. */ @@ -438,11 +505,22 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) return container_of(dev, struct iio_dev, dev); } +/** + * iio_device_get() - increment reference count for the device + * @indio_dev: IIO device structure + * + * Returns: The passed IIO device + **/ +static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) +{ + return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; +} + /* Can we make this smaller? */ #define IIO_ALIGN L1_CACHE_BYTES /** * iio_device_alloc() - allocate an iio_dev from a driver - * @sizeof_priv: Space to allocate for private structure. + * @sizeof_priv: Space to allocate for private structure. **/ struct iio_dev *iio_device_alloc(int sizeof_priv); @@ -459,13 +537,13 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) /** * iio_device_free() - free an iio_dev from a driver - * @dev: the iio_dev associated with the device + * @indio_dev: the iio_dev associated with the device **/ void iio_device_free(struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) { @@ -475,7 +553,7 @@ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) /** * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ #if defined(CONFIG_DEBUG_FS) static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 0b1f19bfdc4..400a453ff67 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -14,7 +14,7 @@ * This is matched against the datasheet_name element * of struct iio_chan_spec. * @consumer_dev_name: Name to uniquely identify the consumer device. - * @consumer_channel: Unique name used to idenitify the channel on the + * @consumer_channel: Unique name used to identify the channel on the * consumer side. */ struct iio_map { diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index bfedb73b850..b7a934b9431 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -97,7 +97,7 @@ struct iio_const_attr { #define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) /** - * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies * @_string: frequency string for the attribute * * Constant version diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h new file mode 100644 index 00000000000..c378ebec605 --- /dev/null +++ b/include/linux/iio/triggered_buffer.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_ +#define _LINUX_IIO_TRIGGERED_BUFFER_H_ + +#include <linux/interrupt.h> + +struct iio_dev; +struct iio_buffer_setup_ops; + +int iio_triggered_buffer_setup(struct iio_dev *indio_dev, + irqreturn_t (*pollfunc_bh)(int irq, void *p), + irqreturn_t (*pollfunc_th)(int irq, void *p), + const struct iio_buffer_setup_ops *setup_ops); +void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 1b073b1cc7c..44e397705d7 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -11,7 +11,6 @@ #define _IIO_TYPES_H_ enum iio_chan_type { - /* real channel types */ IIO_VOLTAGE, IIO_CURRENT, IIO_POWER, @@ -28,6 +27,7 @@ enum iio_chan_type { IIO_TIMESTAMP, IIO_CAPACITANCE, IIO_ALTVOLTAGE, + IIO_CCT, }; enum iio_modifier { @@ -45,6 +45,12 @@ enum iio_modifier { IIO_MOD_X_OR_Y_OR_Z, IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, + IIO_MOD_ROOT_SUM_SQUARED_X_Y, + IIO_MOD_SUM_SQUARED_X_Y_Z, + IIO_MOD_LIGHT_CLEAR, + IIO_MOD_LIGHT_RED, + IIO_MOD_LIGHT_GREEN, + IIO_MOD_LIGHT_BLUE, }; #define IIO_VAL_INT 1 diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 597f4a9f324..67f9ddacb70 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -38,6 +38,7 @@ enum IPV4_DEVCONF_ACCEPT_LOCAL, IPV4_DEVCONF_SRC_VMARK, IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, __IPV4_DEVCONF_MAX }; @@ -131,6 +132,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_PROMOTE_SECONDARIES(in_dev) \ IN_DEV_ORCONF((in_dev), \ PROMOTE_SECONDARIES) +#define IN_DEV_ROUTE_LOCALNET(in_dev) IN_DEV_ORCONF(in_dev, ROUTE_LOCALNET) #define IN_DEV_RX_REDIRECTS(in_dev) \ ((IN_DEV_FORWARD(in_dev) && \ diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9e65eff6af3..89f1cb1056f 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -123,8 +123,17 @@ extern struct group_info init_groups; extern struct cred init_cred; +extern struct task_group root_task_group; + +#ifdef CONFIG_CGROUP_SCHED +# define INIT_CGROUP_SCHED(tsk) \ + .sched_task_group = &root_task_group, +#else +# define INIT_CGROUP_SCHED(tsk) +#endif + #ifdef CONFIG_PERF_EVENTS -# define INIT_PERF_EVENTS(tsk) \ +# define INIT_PERF_EVENTS(tsk) \ .perf_event_mutex = \ __MUTEX_INITIALIZER(tsk.perf_event_mutex), \ .perf_event_list = LIST_HEAD_INIT(tsk.perf_event_list), @@ -161,6 +170,7 @@ extern struct cred init_cred; }, \ .tasks = LIST_HEAD_INIT(tsk.tasks), \ INIT_PUSHABLE_TASKS(tsk) \ + INIT_CGROUP_SCHED(tsk) \ .ptraced = LIST_HEAD_INIT(tsk.ptraced), \ .ptrace_entry = LIST_HEAD_INIT(tsk.ptrace_entry), \ .real_parent = &tsk, \ @@ -168,8 +178,8 @@ extern struct cred init_cred; .children = LIST_HEAD_INIT(tsk.children), \ .sibling = LIST_HEAD_INIT(tsk.sibling), \ .group_leader = &tsk, \ - RCU_INIT_POINTER(.real_cred, &init_cred), \ - RCU_INIT_POINTER(.cred, &init_cred), \ + RCU_POINTER_INITIALIZER(real_cred, &init_cred), \ + RCU_POINTER_INITIALIZER(cred, &init_cred), \ .comm = INIT_TASK_COMM, \ .thread = INIT_THREAD, \ .fs = &init_fs, \ diff --git a/include/linux/input.h b/include/linux/input.h index 2740d080ec6..725dcd0f63a 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -807,18 +807,20 @@ struct input_keymap_entry { #define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ #define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ +#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ +#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ #ifdef __KERNEL__ /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR -#define ABS_MT_LAST ABS_MT_DISTANCE +#define ABS_MT_LAST ABS_MT_TOOL_Y #endif #define ABS_MAX 0x3f diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index e6ca56de993..78e2ada50cd 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -308,6 +308,8 @@ enum { struct intel_iommu { void __iomem *reg; /* Pointer to hardware regs, virtual addr */ + u64 reg_phys; /* physical address of hw register set */ + u64 reg_size; /* size of hw register set */ u64 cap; u64 ecap; u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */ diff --git a/include/linux/io.h b/include/linux/io.h index 7fd2d2138bf..069e4075f87 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -67,4 +67,13 @@ int check_signature(const volatile void __iomem *io_addr, const unsigned char *signature, int length); void devm_ioremap_release(struct device *dev, void *res); +/* + * Some systems do not have legacy ISA devices. + * /dev/port is not a valid interface on these systems. + * So for those archs, <asm/io.h> should define the following symbol. + */ +#ifndef arch_has_dev_port +#define arch_has_dev_port() (1) +#endif + #endif /* _LINUX_IO_H */ diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 450293f6d68..54d6d690073 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -26,6 +26,7 @@ #define IOMMU_CACHE (4) /* DMA cache coherency */ struct iommu_ops; +struct iommu_group; struct bus_type; struct device; struct iommu_domain; @@ -37,16 +38,28 @@ struct iommu_domain; typedef int (*iommu_fault_handler_t)(struct iommu_domain *, struct device *, unsigned long, int, void *); +struct iommu_domain_geometry { + dma_addr_t aperture_start; /* First address that can be mapped */ + dma_addr_t aperture_end; /* Last address that can be mapped */ + bool force_aperture; /* DMA only allowed in mappable range? */ +}; + struct iommu_domain { struct iommu_ops *ops; void *priv; iommu_fault_handler_t handler; void *handler_token; + struct iommu_domain_geometry geometry; }; #define IOMMU_CAP_CACHE_COHERENCY 0x1 #define IOMMU_CAP_INTR_REMAP 0x2 /* isolates device intrs */ +enum iommu_attr { + DOMAIN_ATTR_MAX, + DOMAIN_ATTR_GEOMETRY, +}; + #ifdef CONFIG_IOMMU_API /** @@ -59,7 +72,10 @@ struct iommu_domain { * @unmap: unmap a physically contiguous memory region from an iommu domain * @iova_to_phys: translate iova to physical address * @domain_has_cap: domain capabilities query - * @commit: commit iommu domain + * @add_device: add device to iommu grouping + * @remove_device: remove device from iommu grouping + * @domain_get_attr: Query domain attributes + * @domain_set_attr: Change domain attributes * @pgsize_bitmap: bitmap of supported page sizes */ struct iommu_ops { @@ -75,10 +91,23 @@ struct iommu_ops { unsigned long iova); int (*domain_has_cap)(struct iommu_domain *domain, unsigned long cap); + int (*add_device)(struct device *dev); + void (*remove_device)(struct device *dev); int (*device_group)(struct device *dev, unsigned int *groupid); + int (*domain_get_attr)(struct iommu_domain *domain, + enum iommu_attr attr, void *data); + int (*domain_set_attr)(struct iommu_domain *domain, + enum iommu_attr attr, void *data); unsigned long pgsize_bitmap; }; +#define IOMMU_GROUP_NOTIFY_ADD_DEVICE 1 /* Device added */ +#define IOMMU_GROUP_NOTIFY_DEL_DEVICE 2 /* Pre Device removed */ +#define IOMMU_GROUP_NOTIFY_BIND_DRIVER 3 /* Pre Driver bind */ +#define IOMMU_GROUP_NOTIFY_BOUND_DRIVER 4 /* Post Driver bind */ +#define IOMMU_GROUP_NOTIFY_UNBIND_DRIVER 5 /* Pre Driver unbind */ +#define IOMMU_GROUP_NOTIFY_UNBOUND_DRIVER 6 /* Post Driver unbind */ + extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops); extern bool iommu_present(struct bus_type *bus); extern struct iommu_domain *iommu_domain_alloc(struct bus_type *bus); @@ -97,7 +126,34 @@ extern int iommu_domain_has_cap(struct iommu_domain *domain, unsigned long cap); extern void iommu_set_fault_handler(struct iommu_domain *domain, iommu_fault_handler_t handler, void *token); -extern int iommu_device_group(struct device *dev, unsigned int *groupid); + +extern int iommu_attach_group(struct iommu_domain *domain, + struct iommu_group *group); +extern void iommu_detach_group(struct iommu_domain *domain, + struct iommu_group *group); +extern struct iommu_group *iommu_group_alloc(void); +extern void *iommu_group_get_iommudata(struct iommu_group *group); +extern void iommu_group_set_iommudata(struct iommu_group *group, + void *iommu_data, + void (*release)(void *iommu_data)); +extern int iommu_group_set_name(struct iommu_group *group, const char *name); +extern int iommu_group_add_device(struct iommu_group *group, + struct device *dev); +extern void iommu_group_remove_device(struct device *dev); +extern int iommu_group_for_each_dev(struct iommu_group *group, void *data, + int (*fn)(struct device *, void *)); +extern struct iommu_group *iommu_group_get(struct device *dev); +extern void iommu_group_put(struct iommu_group *group); +extern int iommu_group_register_notifier(struct iommu_group *group, + struct notifier_block *nb); +extern int iommu_group_unregister_notifier(struct iommu_group *group, + struct notifier_block *nb); +extern int iommu_group_id(struct iommu_group *group); + +extern int iommu_domain_get_attr(struct iommu_domain *domain, enum iommu_attr, + void *data); +extern int iommu_domain_set_attr(struct iommu_domain *domain, enum iommu_attr, + void *data); /** * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework @@ -142,6 +198,7 @@ static inline int report_iommu_fault(struct iommu_domain *domain, #else /* CONFIG_IOMMU_API */ struct iommu_ops {}; +struct iommu_group {}; static inline bool iommu_present(struct bus_type *bus) { @@ -197,11 +254,88 @@ static inline void iommu_set_fault_handler(struct iommu_domain *domain, { } -static inline int iommu_device_group(struct device *dev, unsigned int *groupid) +int iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group) +{ + return -ENODEV; +} + +void iommu_detach_group(struct iommu_domain *domain, struct iommu_group *group) +{ +} + +struct iommu_group *iommu_group_alloc(void) +{ + return ERR_PTR(-ENODEV); +} + +void *iommu_group_get_iommudata(struct iommu_group *group) +{ + return NULL; +} + +void iommu_group_set_iommudata(struct iommu_group *group, void *iommu_data, + void (*release)(void *iommu_data)) +{ +} + +int iommu_group_set_name(struct iommu_group *group, const char *name) +{ + return -ENODEV; +} + +int iommu_group_add_device(struct iommu_group *group, struct device *dev) +{ + return -ENODEV; +} + +void iommu_group_remove_device(struct device *dev) +{ +} + +int iommu_group_for_each_dev(struct iommu_group *group, void *data, + int (*fn)(struct device *, void *)) +{ + return -ENODEV; +} + +struct iommu_group *iommu_group_get(struct device *dev) +{ + return NULL; +} + +void iommu_group_put(struct iommu_group *group) +{ +} + +int iommu_group_register_notifier(struct iommu_group *group, + struct notifier_block *nb) { return -ENODEV; } +int iommu_group_unregister_notifier(struct iommu_group *group, + struct notifier_block *nb) +{ + return 0; +} + +int iommu_group_id(struct iommu_group *group) +{ + return -ENODEV; +} + +static inline int iommu_domain_get_attr(struct iommu_domain *domain, + enum iommu_attr attr, void *data) +{ + return -EINVAL; +} + +static inline int iommu_domain_set_attr(struct iommu_domain *domain, + enum iommu_attr attr, void *data) +{ + return -EINVAL; +} + #endif /* CONFIG_IOMMU_API */ #endif /* __LINUX_IOMMU_H */ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 8260ef77976..379e433e15e 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -299,9 +299,9 @@ struct ipv6_pinfo { struct in6_addr rcv_saddr; struct in6_addr daddr; struct in6_pktinfo sticky_pktinfo; - struct in6_addr *daddr_cache; + const struct in6_addr *daddr_cache; #ifdef CONFIG_IPV6_SUBTREES - struct in6_addr *saddr_cache; + const struct in6_addr *saddr_cache; #endif __be32 flow_label; @@ -410,6 +410,22 @@ struct tcp6_sock { extern int inet6_sk_rebuild_header(struct sock *sk); +struct inet6_timewait_sock { + struct in6_addr tw_v6_daddr; + struct in6_addr tw_v6_rcv_saddr; +}; + +struct tcp6_timewait_sock { + struct tcp_timewait_sock tcp6tw_tcp; + struct inet6_timewait_sock tcp6tw_inet6; +}; + +static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) +{ + return (struct inet6_timewait_sock *)(((u8 *)sk) + + inet_twsk(sk)->tw_ipv6_offset); +} + #if IS_ENABLED(CONFIG_IPV6) static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk) { @@ -459,28 +475,12 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to, #define __ipv6_only_sock(sk) (inet6_sk(sk)->ipv6only) #define ipv6_only_sock(sk) ((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk)) -struct inet6_timewait_sock { - struct in6_addr tw_v6_daddr; - struct in6_addr tw_v6_rcv_saddr; -}; - -struct tcp6_timewait_sock { - struct tcp_timewait_sock tcp6tw_tcp; - struct inet6_timewait_sock tcp6tw_inet6; -}; - static inline u16 inet6_tw_offset(const struct proto *prot) { return prot->twsk_prot->twsk_obj_size - sizeof(struct inet6_timewait_sock); } -static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) -{ - return (struct inet6_timewait_sock *)(((u8 *)sk) + - inet_twsk(sk)->tw_ipv6_offset); -} - static inline struct in6_addr *__inet6_rcv_saddr(const struct sock *sk) { return likely(sk->sk_state != TCP_TIME_WAIT) ? diff --git a/include/linux/irq.h b/include/linux/irq.h index a5261e3d2e3..553fb66da13 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -150,9 +150,7 @@ struct irq_data { void *handler_data; void *chip_data; struct msi_desc *msi_desc; -#ifdef CONFIG_SMP cpumask_var_t affinity; -#endif }; /* diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index c513a40510f..0976fc46d1e 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -42,8 +42,7 @@ * allowed. * * Not initializing the key (static data is initialized to 0s anyway) is the - * same as using STATIC_KEY_INIT_FALSE and static_key_false() is - * equivalent with static_branch(). + * same as using STATIC_KEY_INIT_FALSE. * */ @@ -107,12 +106,6 @@ static __always_inline bool static_key_true(struct static_key *key) return !static_key_false(key); } -/* Deprecated. Please use 'static_key_false() instead. */ -static __always_inline bool static_branch(struct static_key *key) -{ - return arch_static_branch(key); -} - extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; @@ -166,14 +159,6 @@ static __always_inline bool static_key_true(struct static_key *key) return false; } -/* Deprecated. Please use 'static_key_false() instead. */ -static __always_inline bool static_branch(struct static_key *key) -{ - if (unlikely(atomic_read(&key->enabled)) > 0) - return true; - return false; -} - static inline void static_key_slow_inc(struct static_key *key) { atomic_inc(&key->enabled); diff --git a/include/linux/key.h b/include/linux/key.h index 4cd22ed627e..cef3b315ba7 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -303,7 +303,9 @@ static inline bool key_is_instantiated(const struct key *key) rwsem_is_locked(&((struct key *)(KEY))->sem))) #define rcu_assign_keypointer(KEY, PAYLOAD) \ - (rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD)) +do { \ + rcu_assign_pointer((KEY)->payload.rcudata, (PAYLOAD)); \ +} while (0) #ifdef CONFIG_SYSCTL extern ctl_table key_sysctls[]; diff --git a/include/linux/ks8851_mll.h b/include/linux/ks8851_mll.h new file mode 100644 index 00000000000..e9ccfb59ed3 --- /dev/null +++ b/include/linux/ks8851_mll.h @@ -0,0 +1,33 @@ +/* + * ks8861_mll platform data struct definition + * Copyright (c) 2012 BTicino S.p.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_KS8851_MLL_H +#define _LINUX_KS8851_MLL_H + +#include <linux/if_ether.h> + +/** + * struct ks8851_mll_platform_data - Platform data of the KS8851_MLL network driver + * @macaddr: The MAC address of the device, set to all 0:s to use the on in + * the chip. + */ +struct ks8851_mll_platform_data { + u8 mac_addr[ETH_ALEN]; +}; + +#endif diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 0714b24c0e4..22ccf9dee17 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -49,8 +49,6 @@ extern int tsk_fork_get_node(struct task_struct *tsk); * can be queued and flushed using queue/flush_kthread_work() * respectively. Queued kthread_works are processed by a kthread * running kthread_worker_fn(). - * - * A kthread_work can't be freed while it is executing. */ struct kthread_work; typedef void (*kthread_work_func_t)(struct kthread_work *work); @@ -59,15 +57,14 @@ struct kthread_worker { spinlock_t lock; struct list_head work_list; struct task_struct *task; + struct kthread_work *current_work; }; struct kthread_work { struct list_head node; kthread_work_func_t func; wait_queue_head_t done; - atomic_t flushing; - int queue_seq; - int done_seq; + struct kthread_worker *worker; }; #define KTHREAD_WORKER_INIT(worker) { \ @@ -79,7 +76,6 @@ struct kthread_work { .node = LIST_HEAD_INIT((work).node), \ .func = (fn), \ .done = __WAIT_QUEUE_HEAD_INITIALIZER((work).done), \ - .flushing = ATOMIC_INIT(0), \ } #define DEFINE_KTHREAD_WORKER(worker) \ diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 09f2b3aa2da..2ce09aa7d3b 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -617,6 +617,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SIGNAL_MSI 77 #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 #ifdef KVM_CAP_IRQ_ROUTING @@ -828,6 +829,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) /* Available with KVM_CAP_PPC_GET_SMMU_INFO */ #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 96c158a37d3..b70b48b0109 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -306,7 +306,7 @@ struct kvm { struct hlist_head irq_ack_notifier_list; #endif -#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) struct mmu_notifier mmu_notifier; unsigned long mmu_notifier_seq; long mmu_notifier_count; @@ -314,13 +314,19 @@ struct kvm { long tlbs_dirty; }; -/* The guest did something we don't support. */ -#define pr_unimpl(vcpu, fmt, ...) \ - pr_err_ratelimited("kvm: %i: cpu%i " fmt, \ - current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__) +#define kvm_err(fmt, ...) \ + pr_err("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_info(fmt, ...) \ + pr_info("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_debug(fmt, ...) \ + pr_debug("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) +#define kvm_pr_unimpl(fmt, ...) \ + pr_err_ratelimited("kvm [%i]: " fmt, \ + task_tgid_nr(current), ## __VA_ARGS__) -#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt) -#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt) +/* The guest did something we don't support. */ +#define vcpu_unimpl(vcpu, fmt, ...) \ + kvm_pr_unimpl("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__) static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) { @@ -535,6 +541,9 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu); void kvm_free_physmem(struct kvm *kvm); +void *kvm_kvzalloc(unsigned long size); +void kvm_kvfree(const void *addr); + #ifndef __KVM_HAVE_ARCH_VM_ALLOC static inline struct kvm *kvm_arch_alloc_vm(void) { @@ -771,7 +780,7 @@ struct kvm_stats_debugfs_item { extern struct kvm_stats_debugfs_item debugfs_entries[]; extern struct dentry *kvm_debugfs_dir; -#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) { if (unlikely(vcpu->kvm->mmu_notifier_count)) @@ -793,7 +802,7 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se } #endif -#ifdef CONFIG_HAVE_KVM_IRQCHIP +#ifdef KVM_CAP_IRQ_ROUTING #define KVM_MAX_IRQ_ROUTES 1024 diff --git a/include/linux/libata.h b/include/linux/libata.h index 6e887c742a2..64f90e17e51 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -161,6 +161,8 @@ enum { ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), + ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ + ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */ @@ -545,9 +547,6 @@ struct ata_host { struct mutex eh_mutex; struct task_struct *eh_owner; -#ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; -#endif struct ata_port *simplex_claimed; /* channel owning the DMA */ struct ata_port *ports[0]; }; @@ -615,7 +614,6 @@ struct ata_device { struct scsi_device *sdev; /* attached SCSI device */ void *private_data; #ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; union acpi_object *gtf_cache; unsigned int gtf_filter; #endif @@ -797,7 +795,6 @@ struct ata_port { void *private_data; #ifdef CONFIG_ATA_ACPI - acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif /* owned by EH */ @@ -846,6 +843,8 @@ struct ata_port_operations { void (*error_handler)(struct ata_port *ap); void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); + void (*sched_eh)(struct ata_port *ap); + void (*end_eh)(struct ata_port *ap); /* * Optional features @@ -1114,6 +1113,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm); +acpi_handle ata_ap_acpi_handle(struct ata_port *ap); +acpi_handle ata_dev_acpi_handle(struct ata_device *dev); int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm); #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) @@ -1167,6 +1168,8 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); extern void ata_std_error_handler(struct ata_port *ap); +extern void ata_std_sched_eh(struct ata_port *ap); +extern void ata_std_end_eh(struct ata_port *ap); extern int ata_link_nr_enabled(struct ata_link *link); /* diff --git a/include/linux/mdio.h b/include/linux/mdio.h index dfb947959ec..7cccafe50e7 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -43,7 +43,11 @@ #define MDIO_PKGID2 15 #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ +#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ +#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ @@ -56,7 +60,6 @@ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ -#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -82,6 +85,7 @@ #define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART #define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE #define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ +#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ /* 10 Gb/s */ #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) @@ -237,9 +241,25 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ -/* AN EEE Advertisement register. */ -#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ -#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* EEE Supported/Advertisement/LP Advertisement registers. + * + * EEE capability Register (3.20), Advertisement (7.60) and + * Link partner ability (7.61) registers have and can use the same identical + * bit masks. + */ +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* Note: the two defines above can be potentially used by the user-land + * and cannot remove them now. + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros + * using the previous ones (that can be considered obsolete). + */ +#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ +#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ /* LASI RX_ALARM control/status registers. */ #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ diff --git a/include/linux/mfd/abx500/ab8500-codec.h b/include/linux/mfd/abx500/ab8500-codec.h new file mode 100644 index 00000000000..dc6529202cd --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-codec.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com> + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef AB8500_CORE_CODEC_H +#define AB8500_CORE_CODEC_H + +/* Mic-types */ +enum amic_type { + AMIC_TYPE_SINGLE_ENDED, + AMIC_TYPE_DIFFERENTIAL +}; + +/* Mic-biases */ +enum amic_micbias { + AMIC_MICBIAS_VAMIC1, + AMIC_MICBIAS_VAMIC2 +}; + +/* Bias-voltage */ +enum ear_cm_voltage { + EAR_CMV_0_95V, + EAR_CMV_1_10V, + EAR_CMV_1_27V, + EAR_CMV_1_58V +}; + +/* Analog microphone settings */ +struct amic_settings { + enum amic_type mic1_type; + enum amic_type mic2_type; + enum amic_micbias mic1a_micbias; + enum amic_micbias mic1b_micbias; + enum amic_micbias mic2_micbias; +}; + +/* Platform data structure for the audio-parts of the AB8500 */ +struct ab8500_codec_platform_data { + struct amic_settings amics; + enum ear_cm_voltage ear_cmv; +}; + +#endif diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 91dd3ef63e9..bc9b84b60ec 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -266,6 +266,7 @@ struct ab8500 { struct regulator_reg_init; struct regulator_init_data; struct ab8500_gpio_platform_data; +struct ab8500_codec_platform_data; /** * struct ab8500_platform_data - AB8500 platform data @@ -284,6 +285,7 @@ struct ab8500_platform_data { int num_regulator; struct regulator_init_data *regulator; struct ab8500_gpio_platform_data *gpio; + struct ab8500_codec_platform_data *codec; }; extern int __devinit ab8500_init(struct ab8500 *ab8500, diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h index 21603b42f22..0b2e0ed309f 100644 --- a/include/linux/mfd/s5m87xx/s5m-core.h +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -347,6 +347,7 @@ struct s5m_platform_data { bool buck_voltage_lock; int buck_gpios[3]; + int buck_ds[3]; int buck2_voltage[8]; bool buck2_gpiodvs; int buck3_voltage[8]; @@ -369,6 +370,10 @@ struct s5m_platform_data { bool buck2_ramp_enable; bool buck3_ramp_enable; bool buck4_ramp_enable; + + int buck2_init; + int buck3_init; + int buck4_init; }; #endif /* __LINUX_MFD_S5M_CORE_H */ diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index f5171dbf885..d83af39815a 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -101,6 +101,7 @@ struct tmio_mmc_host; struct tmio_mmc_data { unsigned int hclk; unsigned long capabilities; + unsigned long capabilities2; unsigned long flags; u32 ocr_mask; /* available voltages */ struct tmio_mmc_dma *dma; @@ -110,6 +111,9 @@ struct tmio_mmc_data { void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); + /* clock management callbacks */ + int (*clk_enable)(struct platform_device *pdev, unsigned int *f); + void (*clk_disable)(struct platform_device *pdev); }; /* diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index e030ef9a64e..12c06870829 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -217,7 +217,8 @@ enum tps65217_regulator_id { * Board data may be used to initialize regulator. */ struct tps65217_board { - struct regulator_init_data *tps65217_init_data; + struct regulator_init_data *tps65217_init_data[TPS65217_NUM_REGULATOR]; + struct device_node *of_node[TPS65217_NUM_REGULATOR]; }; /** @@ -227,11 +228,6 @@ struct tps65217_board { * @max_uV: minimum micro volts * @vsel_to_uv: Function pointer to get voltage from selector * @uv_to_vsel: Function pointer to get selector from voltage - * @table: Table for non-uniform voltage step-size - * @table_len: Length of the voltage table - * @enable_mask: Regulator enable mask bits - * @set_vout_reg: Regulator output voltage set register - * @set_vout_mask: Regulator output voltage set mask * * This data is used to check the regualtor voltage limits while setting. */ @@ -241,11 +237,6 @@ struct tps_info { int max_uV; int (*vsel_to_uv)(unsigned int vsel); int (*uv_to_vsel)(int uV, unsigned int *vsel); - const int *table; - unsigned int table_len; - unsigned int enable_mask; - unsigned int set_vout_reg; - unsigned int set_vout_mask; }; /** diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index dd8dc0a6c46..6c4c478e21a 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -880,4 +880,10 @@ static inline int tps65910_reg_clear_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, 0); } +static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, + u8 mask, u8 val) +{ + return regmap_update_bits(tps65910->regmap, reg, mask, val); +} + #endif /* __LINUX_MFD_TPS65910_H */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 2783eca629a..8ef3a7a1159 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -21,6 +21,8 @@ #define MII_EXPANSION 0x06 /* Expansion register */ #define MII_CTRL1000 0x09 /* 1000BASE-T control */ #define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ #define MII_ESTATUS 0x0f /* Extended Status */ #define MII_DCOUNTER 0x12 /* Disconnect counter */ #define MII_FCSCOUNTER 0x13 /* False carrier counter */ @@ -141,6 +143,13 @@ #define FLOW_CTRL_TX 0x01 #define FLOW_CTRL_RX 0x02 +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + /* This structure is used in all SIOCxMIIxxx ioctl calls */ struct mii_ioctl_data { __u16 phy_id; diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 0549d211550..e0deeb2cc93 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -35,6 +35,7 @@ #define MPT_MINOR 220 #define MPT2SAS_MINOR 221 #define UINPUT_MINOR 223 +#define MISC_MCELOG_MINOR 227 #define HPET_MINOR 228 #define FUSE_MINOR 229 #define KVM_MINOR 232 diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h index 1f3860a8a10..26069518625 100644 --- a/include/linux/mlx4/cmd.h +++ b/include/linux/mlx4/cmd.h @@ -154,6 +154,10 @@ enum { /* set port opcode modifiers */ MLX4_SET_PORT_PRIO2TC = 0x8, MLX4_SET_PORT_SCHEDULER = 0x9, + + /* register/delete flow steering network rules */ + MLX4_QP_FLOW_STEERING_ATTACH = 0x65, + MLX4_QP_FLOW_STEERING_DETACH = 0x66, }; enum { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6a8f002b8ed..bd6c9fcdf2d 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -36,6 +36,7 @@ #include <linux/pci.h> #include <linux/completion.h> #include <linux/radix-tree.h> +#include <linux/cpu_rmap.h> #include <linux/atomic.h> @@ -56,6 +57,13 @@ enum { MLX4_MAX_PORTS = 2 }; +/* base qkey for use in sriov tunnel-qp/proxy-qp communication. + * These qkeys must not be allowed for general use. This is a 64k range, + * and to test for violation, we use the mask (protect against future chg). + */ +#define MLX4_RESERVED_QKEY_BASE (0xFFFF0000) +#define MLX4_RESERVED_QKEY_MASK (0xFFFF0000) + enum { MLX4_BOARD_ID_LEN = 64 }; @@ -70,6 +78,36 @@ enum { MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1) }; +/* Driver supports 3 diffrent device methods to manage traffic steering: + * -device managed - High level API for ib and eth flow steering. FW is + * managing flow steering tables. + * - B0 steering mode - Common low level API for ib and (if supported) eth. + * - A0 steering mode - Limited low level API for eth. In case of IB, + * B0 mode is in use. + */ +enum { + MLX4_STEERING_MODE_A0, + MLX4_STEERING_MODE_B0, + MLX4_STEERING_MODE_DEVICE_MANAGED +}; + +static inline const char *mlx4_steering_mode_str(int steering_mode) +{ + switch (steering_mode) { + case MLX4_STEERING_MODE_A0: + return "A0 steering"; + + case MLX4_STEERING_MODE_B0: + return "B0 steering"; + + case MLX4_STEERING_MODE_DEVICE_MANAGED: + return "Device managed flow steering"; + + default: + return "Unrecognize steering mode"; + } +} + enum { MLX4_DEV_CAP_FLAG_RC = 1LL << 0, MLX4_DEV_CAP_FLAG_UC = 1LL << 1, @@ -96,13 +134,15 @@ enum { MLX4_DEV_CAP_FLAG_VEP_UC_STEER = 1LL << 41, MLX4_DEV_CAP_FLAG_VEP_MC_STEER = 1LL << 42, MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48, - MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55 + MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55, + MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV = 1LL << 59, }; enum { MLX4_DEV_CAP_FLAG2_RSS = 1LL << 0, MLX4_DEV_CAP_FLAG2_RSS_TOP = 1LL << 1, - MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2 + MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2, + MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 }; #define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90) @@ -138,6 +178,7 @@ enum mlx4_event { MLX4_EVENT_TYPE_COMM_CHANNEL = 0x18, MLX4_EVENT_TYPE_FATAL_WARNING = 0x1b, MLX4_EVENT_TYPE_FLR_EVENT = 0x1c, + MLX4_EVENT_TYPE_PORT_MNG_CHG_EVENT = 0x1d, MLX4_EVENT_TYPE_NONE = 0xff, }; @@ -235,12 +276,32 @@ enum { MLX4_MAX_FAST_REG_PAGES = 511, }; +enum { + MLX4_DEV_PMC_SUBTYPE_GUID_INFO = 0x14, + MLX4_DEV_PMC_SUBTYPE_PORT_INFO = 0x15, + MLX4_DEV_PMC_SUBTYPE_PKEY_TABLE = 0x16, +}; + +/* Port mgmt change event handling */ +enum { + MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK = 1 << 0, + MLX4_EQ_PORT_INFO_GID_PFX_CHANGE_MASK = 1 << 1, + MLX4_EQ_PORT_INFO_LID_CHANGE_MASK = 1 << 2, + MLX4_EQ_PORT_INFO_CLIENT_REREG_MASK = 1 << 3, + MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK = 1 << 4, +}; + +#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ + MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK) + static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor) { return (major << 32) | (minor << 16) | subminor; } struct mlx4_phys_caps { + u32 gid_phys_table_len[MLX4_MAX_PORTS + 1]; + u32 pkey_phys_table_len[MLX4_MAX_PORTS + 1]; u32 num_phys_eqs; }; @@ -273,6 +334,8 @@ struct mlx4_caps { int max_qp_init_rdma; int max_qp_dest_rdma; int sqp_start; + u32 base_sqpn; + u32 base_tunnel_sqpn; int num_srqs; int max_srq_wqes; int max_srq_sge; @@ -295,6 +358,8 @@ struct mlx4_caps { int num_amgms; int reserved_mcgs; int num_qp_per_mgm; + int steering_mode; + int fs_log_max_ucast_qp_range_size; int num_pds; int reserved_pds; int max_xrcds; @@ -509,8 +574,85 @@ struct mlx4_dev { u8 rev_id; char board_id[MLX4_BOARD_ID_LEN]; int num_vfs; + u64 regid_promisc_array[MLX4_MAX_PORTS + 1]; + u64 regid_allmulti_array[MLX4_MAX_PORTS + 1]; }; +struct mlx4_eqe { + u8 reserved1; + u8 type; + u8 reserved2; + u8 subtype; + union { + u32 raw[6]; + struct { + __be32 cqn; + } __packed comp; + struct { + u16 reserved1; + __be16 token; + u32 reserved2; + u8 reserved3[3]; + u8 status; + __be64 out_param; + } __packed cmd; + struct { + __be32 qpn; + } __packed qp; + struct { + __be32 srqn; + } __packed srq; + struct { + __be32 cqn; + u32 reserved1; + u8 reserved2[3]; + u8 syndrome; + } __packed cq_err; + struct { + u32 reserved1[2]; + __be32 port; + } __packed port_change; + struct { + #define COMM_CHANNEL_BIT_ARRAY_SIZE 4 + u32 reserved; + u32 bit_vec[COMM_CHANNEL_BIT_ARRAY_SIZE]; + } __packed comm_channel_arm; + struct { + u8 port; + u8 reserved[3]; + __be64 mac; + } __packed mac_update; + struct { + __be32 slave_id; + } __packed flr_event; + struct { + __be16 current_temperature; + __be16 warning_threshold; + } __packed warming; + struct { + u8 reserved[3]; + u8 port; + union { + struct { + __be16 mstr_sm_lid; + __be16 port_lid; + __be32 changed_attr; + u8 reserved[3]; + u8 mstr_sm_sl; + __be64 gid_prefix; + } __packed port_info; + struct { + __be32 block_ptr; + __be32 tbl_entries_mask; + } __packed tbl_change_info; + } params; + } __packed port_mgmt_change; + } event; + u8 slave_id; + u8 reserved3[2]; + u8 owner; +} __packed; + struct mlx4_init_port_param { int set_guid0; int set_node_guid; @@ -534,6 +676,15 @@ struct mlx4_init_port_param { if (((dev)->caps.port_mask[port] == MLX4_PORT_TYPE_IB) || \ ((dev)->caps.flags & MLX4_DEV_CAP_FLAG_IBOE)) +#define MLX4_INVALID_SLAVE_ID 0xFF + +void handle_port_mgmt_change_event(struct work_struct *work); + +static inline int mlx4_master_func_num(struct mlx4_dev *dev) +{ + return dev->caps.function; +} + static inline int mlx4_is_master(struct mlx4_dev *dev) { return dev->flags & MLX4_FLAG_MASTER; @@ -623,9 +774,99 @@ int mlx4_unicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], int mlx4_unicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], enum mlx4_protocol prot); int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - int block_mcast_loopback, enum mlx4_protocol protocol); + u8 port, int block_mcast_loopback, + enum mlx4_protocol protocol, u64 *reg_id); int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - enum mlx4_protocol protocol); + enum mlx4_protocol protocol, u64 reg_id); + +enum { + MLX4_DOMAIN_UVERBS = 0x1000, + MLX4_DOMAIN_ETHTOOL = 0x2000, + MLX4_DOMAIN_RFS = 0x3000, + MLX4_DOMAIN_NIC = 0x5000, +}; + +enum mlx4_net_trans_rule_id { + MLX4_NET_TRANS_RULE_ID_ETH = 0, + MLX4_NET_TRANS_RULE_ID_IB, + MLX4_NET_TRANS_RULE_ID_IPV6, + MLX4_NET_TRANS_RULE_ID_IPV4, + MLX4_NET_TRANS_RULE_ID_TCP, + MLX4_NET_TRANS_RULE_ID_UDP, + MLX4_NET_TRANS_RULE_NUM, /* should be last */ +}; + +enum mlx4_net_trans_promisc_mode { + MLX4_FS_PROMISC_NONE = 0, + MLX4_FS_PROMISC_UPLINK, + /* For future use. Not implemented yet */ + MLX4_FS_PROMISC_FUNCTION_PORT, + MLX4_FS_PROMISC_ALL_MULTI, +}; + +struct mlx4_spec_eth { + u8 dst_mac[6]; + u8 dst_mac_msk[6]; + u8 src_mac[6]; + u8 src_mac_msk[6]; + u8 ether_type_enable; + __be16 ether_type; + __be16 vlan_id_msk; + __be16 vlan_id; +}; + +struct mlx4_spec_tcp_udp { + __be16 dst_port; + __be16 dst_port_msk; + __be16 src_port; + __be16 src_port_msk; +}; + +struct mlx4_spec_ipv4 { + __be32 dst_ip; + __be32 dst_ip_msk; + __be32 src_ip; + __be32 src_ip_msk; +}; + +struct mlx4_spec_ib { + __be32 r_qpn; + __be32 qpn_msk; + u8 dst_gid[16]; + u8 dst_gid_msk[16]; +}; + +struct mlx4_spec_list { + struct list_head list; + enum mlx4_net_trans_rule_id id; + union { + struct mlx4_spec_eth eth; + struct mlx4_spec_ib ib; + struct mlx4_spec_ipv4 ipv4; + struct mlx4_spec_tcp_udp tcp_udp; + }; +}; + +enum mlx4_net_trans_hw_rule_queue { + MLX4_NET_TRANS_Q_FIFO, + MLX4_NET_TRANS_Q_LIFO, +}; + +struct mlx4_net_trans_rule { + struct list_head list; + enum mlx4_net_trans_hw_rule_queue queue_mode; + bool exclusive; + bool allow_loopback; + enum mlx4_net_trans_promisc_mode promisc_mode; + u8 port; + u16 priority; + u32 qpn; +}; + +int mlx4_flow_steer_promisc_add(struct mlx4_dev *dev, u8 port, u32 qpn, + enum mlx4_net_trans_promisc_mode mode); +int mlx4_flow_steer_promisc_remove(struct mlx4_dev *dev, u8 port, + enum mlx4_net_trans_promisc_mode mode); int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); @@ -659,7 +900,8 @@ void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr, int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr); int mlx4_SYNC_TPT(struct mlx4_dev *dev); int mlx4_test_interrupts(struct mlx4_dev *dev); -int mlx4_assign_eq(struct mlx4_dev *dev, char* name , int* vector); +int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, + int *vector); void mlx4_release_eq(struct mlx4_dev *dev, int vec); int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port); @@ -668,4 +910,10 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); +int mlx4_flow_attach(struct mlx4_dev *dev, + struct mlx4_net_trans_rule *rule, u64 *reg_id); +int mlx4_flow_detach(struct mlx4_dev *dev, u64 reg_id); + +int mlx4_get_parav_qkey(struct mlx4_dev *dev, u32 qpn, u32 *qkey); + #endif /* MLX4_DEVICE_H */ diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index 5f1298b1b5e..d813704b963 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -37,18 +37,21 @@ struct mlx4_dev; +#define MLX4_MAC_MASK 0xffffffffffffULL + enum mlx4_dev_event { MLX4_DEV_EVENT_CATASTROPHIC_ERROR, MLX4_DEV_EVENT_PORT_UP, MLX4_DEV_EVENT_PORT_DOWN, MLX4_DEV_EVENT_PORT_REINIT, + MLX4_DEV_EVENT_PORT_MGMT_CHANGE, }; struct mlx4_interface { void * (*add) (struct mlx4_dev *dev); void (*remove)(struct mlx4_dev *dev, void *context); void (*event) (struct mlx4_dev *dev, void *context, - enum mlx4_dev_event event, int port); + enum mlx4_dev_event event, unsigned long param); void * (*get_dev)(struct mlx4_dev *dev, void *context, u8 port); struct list_head list; enum mlx4_protocol protocol; diff --git a/include/linux/mm.h b/include/linux/mm.h index b36d08ce5c5..f9f279cf5b1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1591,6 +1591,7 @@ void vmemmap_populate_print_last(void); enum mf_flags { MF_COUNT_INCREASED = 1 << 0, MF_ACTION_REQUIRED = 1 << 1, + MF_MUST_KILL = 1 << 2, }; extern int memory_failure(unsigned long pfn, int trapno, int flags); extern void memory_failure_queue(unsigned long pfn, int trapno, int flags); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index d76513b5b26..111aca5e97f 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -149,6 +149,7 @@ struct sd_switch_caps { #define SD_SET_CURRENT_LIMIT_400 1 #define SD_SET_CURRENT_LIMIT_600 2 #define SD_SET_CURRENT_LIMIT_800 3 +#define SD_SET_CURRENT_NO_CHANGE (-1) #define SD_MAX_CURRENT_200 (1 << SD_SET_CURRENT_LIMIT_200) #define SD_MAX_CURRENT_400 (1 << SD_SET_CURRENT_LIMIT_400) diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h deleted file mode 100644 index cefaba038cc..00000000000 --- a/include/linux/mmc/cd-gpio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Generic GPIO card-detect helper header - * - * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef MMC_CD_GPIO_H -#define MMC_CD_GPIO_H - -struct mmc_host; -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio); -void mmc_cd_gpio_free(struct mmc_host *host); - -#endif diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0707d228d7f..f578a71d82a 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -11,6 +11,7 @@ #define LINUX_MMC_HOST_H #include <linux/leds.h> +#include <linux/mutex.h> #include <linux/sched.h> #include <linux/device.h> #include <linux/fault-inject.h> @@ -150,11 +151,31 @@ struct mmc_async_req { int (*err_check) (struct mmc_card *, struct mmc_async_req *); }; -struct mmc_hotplug { - unsigned int irq; +/** + * struct mmc_slot - MMC slot functions + * + * @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL + * @lock: protect the @handler_priv pointer + * @handler_priv: MMC/SD-card slot context + * + * Some MMC/SD host controllers implement slot-functions like card and + * write-protect detection natively. However, a large number of controllers + * leave these functions to the CPU. This struct provides a hook to attach + * such slot-function drivers. + */ +struct mmc_slot { + int cd_irq; + struct mutex lock; void *handler_priv; }; +struct regulator; + +struct mmc_supply { + struct regulator *vmmc; /* Card power supply */ + struct regulator *vqmmc; /* Optional Vccq supply */ +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -168,6 +189,9 @@ struct mmc_host { u32 ocr_avail_sd; /* SD-specific OCR */ u32 ocr_avail_mmc; /* MMC-specific OCR */ struct notifier_block pm_notify; + u32 max_current_330; + u32 max_current_300; + u32 max_current_180; #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ @@ -211,16 +235,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */ -#define MMC_CAP_SET_XPC_330 (1 << 20) /* Host supports >150mA current at 3.3V */ -#define MMC_CAP_SET_XPC_300 (1 << 21) /* Host supports >150mA current at 3.0V */ -#define MMC_CAP_SET_XPC_180 (1 << 22) /* Host supports >150mA current at 1.8V */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ -#define MMC_CAP_MAX_CURRENT_200 (1 << 26) /* Host max current limit is 200mA */ -#define MMC_CAP_MAX_CURRENT_400 (1 << 27) /* Host max current limit is 400mA */ -#define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */ -#define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */ #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ @@ -238,6 +255,8 @@ struct mmc_host { #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ #define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ #define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ +#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; @@ -290,7 +309,7 @@ struct mmc_host { struct delayed_work detect; int detect_change; /* card detect flag */ - struct mmc_hotplug hotplug; + struct mmc_slot slot; const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ @@ -309,6 +328,7 @@ struct mmc_host { #ifdef CONFIG_REGULATOR bool regulator_enabled; /* regulator state */ #endif + struct mmc_supply supply; struct dentry *debugfs_root; @@ -357,13 +377,12 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host) wake_up_process(host->sdio_irq_thread); } -struct regulator; - #ifdef CONFIG_REGULATOR int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); +int mmc_regulator_get_supply(struct mmc_host *mmc); #else static inline int mmc_regulator_get_ocrmask(struct regulator *supply) { @@ -376,6 +395,11 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, { return 0; } + +static inline int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + return 0; +} #endif int mmc_card_awake(struct mmc_host *host); diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index e9051e1cb1c..ac83b105bed 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -122,6 +122,7 @@ struct sdhci_host { #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ #define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */ +#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ unsigned int version; /* SDHCI spec. version */ @@ -155,7 +156,8 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ - unsigned int caps; /* Alternative capabilities */ + unsigned int caps; /* Alternative CAPABILITY_0 */ + unsigned int caps1; /* Alternative CAPABILITY_1 */ unsigned int ocr_avail_sdio; /* OCR bit masks */ unsigned int ocr_avail_sd; diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 05f0e3db1c1..e7d5dd67bb7 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -32,18 +32,14 @@ * 1111 : Peripheral clock (sup_pclk set '1') */ -struct sh_mmcif_dma { - struct sh_dmae_slave chan_priv_tx; - struct sh_dmae_slave chan_priv_rx; -}; - struct sh_mmcif_plat_data { void (*set_pwr)(struct platform_device *pdev, int state); void (*down_pwr)(struct platform_device *pdev); int (*get_cd)(struct platform_device *pdef); - struct sh_mmcif_dma *dma; /* Deprecated. Instead */ - unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */ + unsigned int slave_id_tx; /* embedded slave_id_[tr]x */ unsigned int slave_id_rx; + bool use_cd_gpio : 1; + unsigned int cd_gpio; u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ unsigned long caps; u32 ocr; diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index e94e620aedd..b65679ffa88 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -23,6 +23,7 @@ struct sh_mobile_sdhi_info { int dma_slave_rx; unsigned long tmio_flags; unsigned long tmio_caps; + unsigned long tmio_caps2; u32 tmio_ocr_mask; /* available MMC voltages */ unsigned int cd_gpio; struct tmio_mmc_data *pdata; diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h new file mode 100644 index 00000000000..7d88d27bfaf --- /dev/null +++ b/include/linux/mmc/slot-gpio.h @@ -0,0 +1,24 @@ +/* + * Generic GPIO card-detect helper header + * + * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MMC_SLOT_GPIO_H +#define MMC_SLOT_GPIO_H + +struct mmc_host; + +int mmc_gpio_get_ro(struct mmc_host *host); +int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio); +void mmc_gpio_free_ro(struct mmc_host *host); + +int mmc_gpio_get_cd(struct mmc_host *host); +int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio); +void mmc_gpio_free_cd(struct mmc_host *host); + +#endif diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 68c569fcbb6..458988bd55a 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -188,7 +188,7 @@ static inline int is_unevictable_lru(enum lru_list lru) struct zone_reclaim_stat { /* * The pageout code in vmscan.c keeps track of how many of the - * mem/swap backed and file backed pages are refeferenced. + * mem/swap backed and file backed pages are referenced. * The higher the rotated/scanned ratio, the more valuable * that cache is. * diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 5db93821f9c..6955045199b 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -78,6 +78,9 @@ struct ieee1394_device_id { * of a given interface; other interfaces may support other classes. * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. + * @bInterfaceNumber: Number of interface; composite devices may use + * fixed interface numbers to differentiate between vendor-specific + * interfaces. * @driver_info: Holds information used by the driver. Usually it holds * a pointer to a descriptor understood by the driver, or perhaps * device flags. @@ -115,8 +118,12 @@ struct usb_device_id { __u8 bInterfaceSubClass; __u8 bInterfaceProtocol; + /* Used for vendor-specific interface matches */ + __u8 bInterfaceNumber; + /* not matched against */ - kernel_ulong_t driver_info; + kernel_ulong_t driver_info + __attribute__((aligned(sizeof(kernel_ulong_t)))); }; /* Some useful macros to use to create struct usb_device_id */ @@ -130,6 +137,7 @@ struct usb_device_id { #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 +#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 #define HID_ANY_ID (~0) #define HID_BUS_ANY 0xffff diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h new file mode 100644 index 00000000000..f14943d5531 --- /dev/null +++ b/include/linux/mxsfb.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __LINUX_MXSFB_H +#define __LINUX_MXSFB_H + +#include <linux/fb.h> + +#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */ +#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */ +#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */ +#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */ + +#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6) +#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */ + +struct mxsfb_platform_data { + struct fb_videomode *mode_list; + unsigned mode_count; + + unsigned default_bpp; + + unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */ + unsigned ld_intf_width; /* refer STMLCDIF_* macros */ + + unsigned fb_size; /* Size of the video memory. If zero a + * default will be used + */ + unsigned long fb_phys; /* physical address for the video memory. If + * zero the framebuffer memory will be dynamically + * allocated. If specified,fb_size must also be specified. + * fb_phys must be unused by Linux. + */ +}; + +#endif /* __LINUX_MXSFB_H */ diff --git a/include/linux/namei.h b/include/linux/namei.h index ffc02135c48..d2ef8b34b96 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -7,12 +7,6 @@ struct vfsmount; -struct open_intent { - int flags; - int create_mode; - struct file *file; -}; - enum { MAX_NESTED_LINKS = 8 }; struct nameidata { @@ -25,11 +19,6 @@ struct nameidata { int last_type; unsigned depth; char *saved_names[MAX_NESTED_LINKS + 1]; - - /* Intent data */ - union { - struct open_intent open; - } intent; }; /* @@ -78,13 +67,10 @@ extern int kern_path(const char *, unsigned, struct path *); extern struct dentry *kern_path_create(int, const char *, struct path *, int); extern struct dentry *user_path_create(int, const char __user *, struct path *, int); -extern int kern_path_parent(const char *, struct nameidata *); +extern struct dentry *kern_path_locked(const char *, struct path *); extern int vfs_path_lookup(struct dentry *, struct vfsmount *, const char *, unsigned int, struct path *); -extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, - int (*open)(struct inode *, struct file *)); - extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern int follow_down_one(struct path *); @@ -94,6 +80,8 @@ extern int follow_up(struct path *); extern struct dentry *lock_rename(struct dentry *, struct dentry *); extern void unlock_rename(struct dentry *, struct dentry *); +extern void nd_jump_link(struct nameidata *nd, struct path *path); + static inline void nd_set_link(struct nameidata *nd, char *path) { nd->saved_names[nd->depth] = path; diff --git a/include/linux/net.h b/include/linux/net.h index e9ac2df079b..99276c3dc89 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -72,6 +72,7 @@ struct net; #define SOCK_NOSPACE 2 #define SOCK_PASSCRED 3 #define SOCK_PASSSEC 4 +#define SOCK_EXTERNALLY_ALLOCATED 5 #ifndef ARCH_HAS_SOCKET_TYPES /** @@ -247,6 +248,7 @@ extern int sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); extern int sock_map_fd(struct socket *sock, int flags); extern struct socket *sockfd_lookup(int fd, int *err); +extern struct socket *sock_from_file(struct file *file, int *err); #define sockfd_put(sock) fput(sock->file) extern int net_ratelimit(void); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d94cb143151..eb06e58bed0 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1046,10 +1046,9 @@ struct net_device { */ char name[IFNAMSIZ]; - struct pm_qos_request pm_qos_req; - - /* device name hash chain */ + /* device name hash chain, please keep it close to name[] */ struct hlist_node name_hlist; + /* snmp alias */ char *ifalias; @@ -1322,6 +1321,8 @@ struct net_device { /* group the device belongs to */ int group; + + struct pm_qos_request pm_qos_req; }; #define to_net_dev(d) container_of(d, struct net_device, dev) @@ -1626,6 +1627,7 @@ extern int dev_alloc_name(struct net_device *dev, const char *name); extern int dev_open(struct net_device *dev); extern int dev_close(struct net_device *dev); extern void dev_disable_lro(struct net_device *dev); +extern int dev_loopback_xmit(struct sk_buff *newskb); extern int dev_queue_xmit(struct sk_buff *skb); extern int register_netdevice(struct net_device *dev); extern void unregister_netdevice_queue(struct net_device *dev, @@ -2108,7 +2110,12 @@ static inline int netif_set_real_num_rx_queues(struct net_device *dev, static inline int netif_copy_real_num_queues(struct net_device *to_dev, const struct net_device *from_dev) { - netif_set_real_num_tx_queues(to_dev, from_dev->real_num_tx_queues); + int err; + + err = netif_set_real_num_tx_queues(to_dev, + from_dev->real_num_tx_queues); + if (err) + return err; #ifdef CONFIG_RPS return netif_set_real_num_rx_queues(to_dev, from_dev->real_num_rx_queues); @@ -2117,6 +2124,9 @@ static inline int netif_copy_real_num_queues(struct net_device *to_dev, #endif } +#define DEFAULT_MAX_NUM_RSS_QUEUES (8) +extern int netif_get_num_default_rss_queues(void); + /* Use this variant when it is known for sure that it * is executing from hardware interrupt context or with hardware interrupts * disabled. diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index ff9c84c29b2..c613cf0d788 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -94,6 +94,16 @@ static inline int nf_inet_addr_cmp(const union nf_inet_addr *a1, a1->all[3] == a2->all[3]; } +static inline void nf_inet_addr_mask(const union nf_inet_addr *a1, + union nf_inet_addr *result, + const union nf_inet_addr *mask) +{ + result->all[0] = a1->all[0] & mask->all[0]; + result->all[1] = a1->all[1] & mask->all[1]; + result->all[2] = a1->all[2] & mask->all[2]; + result->all[3] = a1->all[3] & mask->all[3]; +} + extern void netfilter_init(void); /* Largest hook number + 1 */ @@ -383,6 +393,22 @@ nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family) extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *) __rcu; extern void nf_ct_attach(struct sk_buff *, struct sk_buff *); extern void (*nf_ct_destroy)(struct nf_conntrack *) __rcu; + +struct nf_conn; +struct nlattr; + +struct nfq_ct_hook { + size_t (*build_size)(const struct nf_conn *ct); + int (*build)(struct sk_buff *skb, struct nf_conn *ct); + int (*parse)(const struct nlattr *attr, struct nf_conn *ct); +}; +extern struct nfq_ct_hook __rcu *nfq_ct_hook; + +struct nfq_ct_nat_hook { + void (*seq_adjust)(struct sk_buff *skb, struct nf_conn *ct, + u32 ctinfo, int off); +}; +extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook; #else static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index 1697036336b..874ae8f2706 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -10,6 +10,7 @@ header-y += nfnetlink.h header-y += nfnetlink_acct.h header-y += nfnetlink_compat.h header-y += nfnetlink_conntrack.h +header-y += nfnetlink_cthelper.h header-y += nfnetlink_cttimeout.h header-y += nfnetlink_log.h header-y += nfnetlink_queue.h diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 0ce91d56a5f..0dfc8b7210a 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -2,6 +2,8 @@ #define __NF_CONNTRACK_SIP_H__ #ifdef __KERNEL__ +#include <net/netfilter/nf_conntrack_expect.h> + #define SIP_PORT 5060 #define SIP_TIMEOUT 3600 diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index a1048c1587d..18341cdb244 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -50,7 +50,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_IPSET 6 #define NFNL_SUBSYS_ACCT 7 #define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 -#define NFNL_SUBSYS_COUNT 9 +#define NFNL_SUBSYS_CTHELPER 9 +#define NFNL_SUBSYS_COUNT 10 #ifdef __KERNEL__ diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index e58e4b93c10..f649f7423ca 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -7,6 +7,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET, IPCTNL_MSG_CT_DELETE, IPCTNL_MSG_CT_GET_CTRZERO, + IPCTNL_MSG_CT_GET_STATS_CPU, + IPCTNL_MSG_CT_GET_STATS, IPCTNL_MSG_MAX }; @@ -15,6 +17,7 @@ enum ctnl_exp_msg_types { IPCTNL_MSG_EXP_NEW, IPCTNL_MSG_EXP_GET, IPCTNL_MSG_EXP_DELETE, + IPCTNL_MSG_EXP_GET_STATS_CPU, IPCTNL_MSG_EXP_MAX }; @@ -191,6 +194,7 @@ enum ctattr_expect_nat { enum ctattr_help { CTA_HELP_UNSPEC, CTA_HELP_NAME, + CTA_HELP_INFO, __CTA_HELP_MAX }; #define CTA_HELP_MAX (__CTA_HELP_MAX - 1) @@ -202,4 +206,39 @@ enum ctattr_secctx { }; #define CTA_SECCTX_MAX (__CTA_SECCTX_MAX - 1) +enum ctattr_stats_cpu { + CTA_STATS_UNSPEC, + CTA_STATS_SEARCHED, + CTA_STATS_FOUND, + CTA_STATS_NEW, + CTA_STATS_INVALID, + CTA_STATS_IGNORE, + CTA_STATS_DELETE, + CTA_STATS_DELETE_LIST, + CTA_STATS_INSERT, + CTA_STATS_INSERT_FAILED, + CTA_STATS_DROP, + CTA_STATS_EARLY_DROP, + CTA_STATS_ERROR, + CTA_STATS_SEARCH_RESTART, + __CTA_STATS_MAX, +}; +#define CTA_STATS_MAX (__CTA_STATS_MAX - 1) + +enum ctattr_stats_global { + CTA_STATS_GLOBAL_UNSPEC, + CTA_STATS_GLOBAL_ENTRIES, + __CTA_STATS_GLOBAL_MAX, +}; +#define CTA_STATS_GLOBAL_MAX (__CTA_STATS_GLOBAL_MAX - 1) + +enum ctattr_expect_stats { + CTA_STATS_EXP_UNSPEC, + CTA_STATS_EXP_NEW, + CTA_STATS_EXP_CREATE, + CTA_STATS_EXP_DELETE, + __CTA_STATS_EXP_MAX, +}; +#define CTA_STATS_EXP_MAX (__CTA_STATS_EXP_MAX - 1) + #endif /* _IPCONNTRACK_NETLINK_H */ diff --git a/include/linux/netfilter/nfnetlink_cthelper.h b/include/linux/netfilter/nfnetlink_cthelper.h new file mode 100644 index 00000000000..33659f6fad3 --- /dev/null +++ b/include/linux/netfilter/nfnetlink_cthelper.h @@ -0,0 +1,55 @@ +#ifndef _NFNL_CTHELPER_H_ +#define _NFNL_CTHELPER_H_ + +#define NFCT_HELPER_STATUS_DISABLED 0 +#define NFCT_HELPER_STATUS_ENABLED 1 + +enum nfnl_acct_msg_types { + NFNL_MSG_CTHELPER_NEW, + NFNL_MSG_CTHELPER_GET, + NFNL_MSG_CTHELPER_DEL, + NFNL_MSG_CTHELPER_MAX +}; + +enum nfnl_cthelper_type { + NFCTH_UNSPEC, + NFCTH_NAME, + NFCTH_TUPLE, + NFCTH_QUEUE_NUM, + NFCTH_POLICY, + NFCTH_PRIV_DATA_LEN, + NFCTH_STATUS, + __NFCTH_MAX +}; +#define NFCTH_MAX (__NFCTH_MAX - 1) + +enum nfnl_cthelper_policy_type { + NFCTH_POLICY_SET_UNSPEC, + NFCTH_POLICY_SET_NUM, + NFCTH_POLICY_SET, + NFCTH_POLICY_SET1 = NFCTH_POLICY_SET, + NFCTH_POLICY_SET2, + NFCTH_POLICY_SET3, + NFCTH_POLICY_SET4, + __NFCTH_POLICY_SET_MAX +}; +#define NFCTH_POLICY_SET_MAX (__NFCTH_POLICY_SET_MAX - 1) + +enum nfnl_cthelper_pol_type { + NFCTH_POLICY_UNSPEC, + NFCTH_POLICY_NAME, + NFCTH_POLICY_EXPECT_MAX, + NFCTH_POLICY_EXPECT_TIMEOUT, + __NFCTH_POLICY_MAX +}; +#define NFCTH_POLICY_MAX (__NFCTH_POLICY_MAX - 1) + +enum nfnl_cthelper_tuple_type { + NFCTH_TUPLE_UNSPEC, + NFCTH_TUPLE_L3PROTONUM, + NFCTH_TUPLE_L4PROTONUM, + __NFCTH_TUPLE_MAX, +}; +#define NFCTH_TUPLE_MAX (__NFCTH_TUPLE_MAX - 1) + +#endif /* _NFNL_CTHELPER_H */ diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h index 24b32e6c009..3b1c1360aed 100644 --- a/include/linux/netfilter/nfnetlink_queue.h +++ b/include/linux/netfilter/nfnetlink_queue.h @@ -42,6 +42,8 @@ enum nfqnl_attr_type { NFQA_IFINDEX_PHYSOUTDEV, /* __u32 ifindex */ NFQA_HWADDR, /* nfqnl_msg_packet_hw */ NFQA_PAYLOAD, /* opaque data payload */ + NFQA_CT, /* nf_conntrack_netlink.h */ + NFQA_CT_INFO, /* enum ip_conntrack_info */ __NFQA_MAX }; @@ -84,8 +86,15 @@ enum nfqnl_attr_config { NFQA_CFG_CMD, /* nfqnl_msg_config_cmd */ NFQA_CFG_PARAMS, /* nfqnl_msg_config_params */ NFQA_CFG_QUEUE_MAXLEN, /* __u32 */ + NFQA_CFG_MASK, /* identify which flags to change */ + NFQA_CFG_FLAGS, /* value of these flags (__u32) */ __NFQA_CFG_MAX }; #define NFQA_CFG_MAX (__NFQA_CFG_MAX-1) +/* Flags for NFQA_CFG_FLAGS */ +#define NFQA_CFG_F_FAIL_OPEN (1 << 0) +#define NFQA_CFG_F_CONNTRACK (1 << 1) +#define NFQA_CFG_F_MAX (1 << 2) + #endif /* _NFNETLINK_QUEUE_H */ diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h index d1366f05d1b..f1656096121 100644 --- a/include/linux/netfilter/xt_connlimit.h +++ b/include/linux/netfilter/xt_connlimit.h @@ -22,13 +22,8 @@ struct xt_connlimit_info { #endif }; unsigned int limit; - union { - /* revision 0 */ - unsigned int inverse; - - /* revision 1 */ - __u32 flags; - }; + /* revision 1 */ + __u32 flags; /* Used internally by the kernel */ struct xt_connlimit_data *data __attribute__((aligned(8))); diff --git a/include/linux/netfilter/xt_recent.h b/include/linux/netfilter/xt_recent.h index 83318e01425..6ef36c113e8 100644 --- a/include/linux/netfilter/xt_recent.h +++ b/include/linux/netfilter/xt_recent.h @@ -32,4 +32,14 @@ struct xt_recent_mtinfo { __u8 side; }; +struct xt_recent_mtinfo_v1 { + __u32 seconds; + __u32 hit_count; + __u8 check_set; + __u8 invert; + char name[XT_RECENT_NAME_LEN]; + __u8 side; + union nf_inet_addr mask; +}; + #endif /* _LINUX_NETFILTER_XT_RECENT_H */ diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index fa0946c549d..e2b12801378 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -66,6 +66,7 @@ enum nf_ip_hook_priorities { NF_IP_PRI_SECURITY = 50, NF_IP_PRI_NAT_SRC = 100, NF_IP_PRI_SELINUX_LAST = 225, + NF_IP_PRI_CONNTRACK_HELPER = 300, NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, NF_IP_PRI_LAST = INT_MAX, }; diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index c61b8fb1a9e..8ba0c5b72ea 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -5,7 +5,6 @@ header-y += ipt_LOG.h header-y += ipt_REJECT.h header-y += ipt_TTL.h header-y += ipt_ULOG.h -header-y += ipt_addrtype.h header-y += ipt_ah.h header-y += ipt_ecn.h header-y += ipt_ttl.h diff --git a/include/linux/netfilter_ipv4/ipt_addrtype.h b/include/linux/netfilter_ipv4/ipt_addrtype.h deleted file mode 100644 index 0da42237c8d..00000000000 --- a/include/linux/netfilter_ipv4/ipt_addrtype.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _IPT_ADDRTYPE_H -#define _IPT_ADDRTYPE_H - -#include <linux/types.h> - -enum { - IPT_ADDRTYPE_INVERT_SOURCE = 0x0001, - IPT_ADDRTYPE_INVERT_DEST = 0x0002, - IPT_ADDRTYPE_LIMIT_IFACE_IN = 0x0004, - IPT_ADDRTYPE_LIMIT_IFACE_OUT = 0x0008, -}; - -struct ipt_addrtype_info_v1 { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 flags; -}; - -/* revision 0 */ -struct ipt_addrtype_info { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 invert_source; - __u32 invert_dest; -}; - -#endif diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 57c025127f1..7c8a513ce7a 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -71,6 +71,7 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_SECURITY = 50, NF_IP6_PRI_NAT_SRC = 100, NF_IP6_PRI_SELINUX_LAST = 225, + NF_IP6_PRI_CONNTRACK_HELPER = 300, NF_IP6_PRI_LAST = INT_MAX, }; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 0f628ffa420..f74dd133788 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -174,11 +174,17 @@ struct netlink_skb_parms { extern void netlink_table_grab(void); extern void netlink_table_ungrab(void); -extern struct sock *netlink_kernel_create(struct net *net, - int unit,unsigned int groups, - void (*input)(struct sk_buff *skb), - struct mutex *cb_mutex, - struct module *module); +/* optional Netlink kernel configuration parameters */ +struct netlink_kernel_cfg { + unsigned int groups; + void (*input)(struct sk_buff *skb); + struct mutex *cb_mutex; + void (*bind)(int group); +}; + +extern struct sock *netlink_kernel_create(struct net *net, int unit, + struct module *module, + struct netlink_kernel_cfg *cfg); extern void netlink_kernel_release(struct sock *sk); extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups); extern int netlink_change_ngroups(struct sock *sk, unsigned int groups); @@ -241,14 +247,6 @@ struct netlink_notify { struct nlmsghdr * __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags); -#define NLMSG_NEW(skb, pid, seq, type, len, flags) \ -({ if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \ - goto nlmsg_failure; \ - __nlmsg_put(skb, pid, seq, type, len, flags); }) - -#define NLMSG_PUT(skb, pid, seq, type, len) \ - NLMSG_NEW(skb, pid, seq, type, len, 0) - struct netlink_dump_control { int (*dump)(struct sk_buff *skb, struct netlink_callback *); int (*done)(struct netlink_callback*); diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5dfa091c334..28f5389c924 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -43,7 +43,7 @@ struct netpoll_info { void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); -int __netpoll_setup(struct netpoll *np); +int __netpoll_setup(struct netpoll *np, struct net_device *ndev); int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 0ae9b5857c8..6189f27e305 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -56,6 +56,10 @@ * %NFC_ATTR_PROTOCOLS) * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed * (it sends %NFC_ATTR_DEVICE_INDEX) + * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in + * target mode. + * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated + * from target mode. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -71,6 +75,8 @@ enum nfc_commands { NFC_EVENT_DEVICE_ADDED, NFC_EVENT_DEVICE_REMOVED, NFC_EVENT_TARGET_LOST, + NFC_EVENT_TM_ACTIVATED, + NFC_EVENT_TM_DEACTIVATED, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -94,6 +100,8 @@ enum nfc_commands { * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes * @NFC_ATTR_COMM_MODE: Passive or active mode * @NFC_ATTR_RF_MODE: Initiator or target + * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for + * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -109,6 +117,8 @@ enum nfc_attrs { NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, NFC_ATTR_DEVICE_POWERED, + NFC_ATTR_IM_PROTOCOLS, + NFC_ATTR_TM_PROTOCOLS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -118,6 +128,7 @@ enum nfc_attrs { #define NFC_NFCID1_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 +#define NFC_GB_MAXSIZE 48 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -125,8 +136,9 @@ enum nfc_attrs { #define NFC_PROTO_FELICA 3 #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 +#define NFC_PROTO_ISO14443_B 6 -#define NFC_PROTO_MAX 6 +#define NFC_PROTO_MAX 7 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -135,13 +147,15 @@ enum nfc_attrs { /* NFC RF modes */ #define NFC_RF_INITIATOR 0 #define NFC_RF_TARGET 1 +#define NFC_RF_NONE 2 /* NFC protocols masks used in bitsets */ -#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) -#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) -#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) -#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) -#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) +#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) +#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) +#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) +#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) struct sockaddr_nfc { sa_family_t sa_family; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 8aadd90b808..d3b7c18b18f 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1374,7 +1374,7 @@ struct nfs_rpc_ops { int (*readlink)(struct inode *, struct page *, unsigned int, unsigned int); int (*create) (struct inode *, struct dentry *, - struct iattr *, int, struct nfs_open_context *); + struct iattr *, int); int (*remove) (struct inode *, struct qstr *); void (*unlink_setup) (struct rpc_message *, struct inode *dir); void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *); diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index a6959f72745..2f387880640 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -170,6 +170,8 @@ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -275,6 +277,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -454,6 +462,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -759,6 +771,9 @@ enum nl80211_commands { * @NL80211_ATTR_IFNAME: network interface name * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * * @NL80211_ATTR_MAC: MAC address (various uses) * * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of @@ -769,6 +784,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -1004,6 +1026,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1061,7 +1085,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1085,10 +1109,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1115,7 +1139,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1182,7 +1206,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -1222,6 +1245,12 @@ enum nl80211_commands { * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds * or 0 to disable background scan. * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1473,6 +1502,10 @@ enum nl80211_attrs { NL80211_ATTR_BG_SCAN_PERIOD, + NL80211_ATTR_WDEV, + + NL80211_ATTR_USER_REG_HINT_TYPE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1520,6 +1553,13 @@ enum nl80211_attrs { #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + +#define NL80211_CQM_TXE_MAX_INTVL 1800 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1613,12 +1653,20 @@ struct nl80211_sta_flag_update { * * These attribute types are used with %NL80211_STA_INFO_TXRATE * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. * * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ @@ -1628,6 +1676,7 @@ enum nl80211_rate_info { NL80211_RATE_INFO_MCS, NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -1788,6 +1837,9 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -1801,6 +1853,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_HT_AMPDU_FACTOR, NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -1952,6 +2007,8 @@ enum nl80211_reg_rule_attr { * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -1959,7 +2016,8 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1967,6 +2025,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * @@ -2008,6 +2069,26 @@ enum nl80211_dfs_regions { }; /** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, +}; + +/** * enum nl80211_survey_info - survey information * * These attribute types are used with %NL80211_ATTR_SURVEY_INFO @@ -2086,78 +2167,91 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2184,6 +2278,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2199,34 +2296,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ @@ -2490,12 +2589,19 @@ enum nl80211_tx_rate_attributes { * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, @@ -2513,6 +2619,17 @@ enum nl80211_ps_state { * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -2522,6 +2639,9 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, @@ -2534,10 +2654,14 @@ enum nl80211_attr_cqm { * configured threshold * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. + * (Note that deauth/disassoc will still follow if the AP is not + * available. This event might get used as roaming event, etc.) */ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, }; @@ -2867,11 +2991,15 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, }; /** diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 5a3db3aa5f1..fd4f2d1cdf6 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -130,18 +130,8 @@ enum { enum { __IEEE802154_DEV_INVALID = -1, - /* TODO: - * Nowadays three device types supported by this stack at linux-zigbee - * project: WPAN = 0, MONITOR = 1 and SMAC = 2. - * - * Since this stack implementation exists many years, it's definitely - * bad idea to change the assigned values due to they are already used - * by third-party userspace software like: iz-tools, wireshark... - * - * Currently only monitor device is added and initialized by '1' for - * compatibility. - */ - IEEE802154_DEV_MONITOR = 1, + IEEE802154_DEV_WPAN, + IEEE802154_DEV_MONITOR, __IEEE802154_DEV_MAX, }; diff --git a/include/linux/of.h b/include/linux/of.h index 2ec1083af7f..0e9cf9eec08 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -163,6 +163,11 @@ static inline int of_node_to_nid(struct device_node *np) { return -1; } #define of_node_to_nid of_node_to_nid #endif +static inline const char* of_node_full_name(struct device_node *np) +{ + return np ? np->full_name : "<no-node>"; +} + extern struct device_node *of_find_node_by_name(struct device_node *from, const char *name); #define for_each_node_by_name(dn, name) \ @@ -260,8 +265,7 @@ extern int of_machine_is_compatible(const char *compat); extern int prom_add_property(struct device_node* np, struct property* prop); extern int prom_remove_property(struct device_node *np, struct property *prop); extern int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop); + struct property *newprop); #if defined(CONFIG_OF_DYNAMIC) /* For updating the device tree at runtime */ @@ -303,6 +307,11 @@ const char *of_prop_next_string(struct property *prop, const char *cur); #else /* CONFIG_OF */ +static inline const char* of_node_full_name(struct device_node *np) +{ + return "<no-node>"; +} + static inline bool of_have_populated_dt(void) { return false; diff --git a/include/linux/of_iommu.h b/include/linux/of_iommu.h new file mode 100644 index 00000000000..51a560f34bc --- /dev/null +++ b/include/linux/of_iommu.h @@ -0,0 +1,21 @@ +#ifndef __OF_IOMMU_H +#define __OF_IOMMU_H + +#ifdef CONFIG_OF_IOMMU + +extern int of_get_dma_window(struct device_node *dn, const char *prefix, + int index, unsigned long *busno, dma_addr_t *addr, + size_t *size); + +#else + +static inline int of_get_dma_window(struct device_node *dn, const char *prefix, + int index, unsigned long *busno, dma_addr_t *addr, + size_t *size) +{ + return -EINVAL; +} + +#endif /* CONFIG_OF_IOMMU */ + +#endif /* __OF_IOMMU_H */ diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h index bae1b6094c6..ed7f267e638 100644 --- a/include/linux/of_mtd.h +++ b/include/linux/of_mtd.h @@ -11,7 +11,7 @@ #ifdef CONFIG_OF_MTD #include <linux/of.h> -extern const int of_get_nand_ecc_mode(struct device_node *np); +int of_get_nand_ecc_mode(struct device_node *np); int of_get_nand_bus_width(struct device_node *np); bool of_get_nand_on_flash_bbt(struct device_node *np); #endif diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 44623500f41..248fba2af98 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -17,6 +17,7 @@ extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev); extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, struct pci_dev *pci_dev); extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev); +extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle); static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6a..5faa8310eec 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -132,9 +132,10 @@ static inline const char *pci_power_name(pci_power_t state) return pci_power_names[1 + (int) state]; } -#define PCI_PM_D2_DELAY 200 -#define PCI_PM_D3_WAIT 10 -#define PCI_PM_BUS_WAIT 50 +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_D3COLD_WAIT 100 +#define PCI_PM_BUS_WAIT 50 /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device @@ -278,11 +279,18 @@ struct pci_dev { unsigned int pme_poll:1; /* Poll device's PME status bit */ unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ - unsigned int no_d1d2:1; /* Only allow D0 and D3 */ + unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ + unsigned int no_d3cold:1; /* D3cold is forbidden */ + unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ unsigned int mmio_always_on:1; /* disallow turning off io/mem decoding during bar sizing */ unsigned int wakeup_prepared:1; + unsigned int runtime_d3cold:1; /* whether go through runtime + D3cold, not set for devices + powered on/off by the + corresponding bridge */ unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ @@ -324,6 +332,8 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; + unsigned int broken_intx_masking:1; + unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */ pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ @@ -368,6 +378,8 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } +extern struct resource busn_resource; + struct pci_host_bridge_window { struct list_head list; struct resource *res; /* host bridge aperture (CPU address) */ @@ -419,6 +431,7 @@ struct pci_bus { struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; struct list_head resources; /* address space routed to this bus */ + struct resource busn_res; /* bus numbers routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ @@ -426,8 +439,6 @@ struct pci_bus { unsigned char number; /* bus number */ unsigned char primary; /* number of primary bridge */ - unsigned char secondary; /* number of secondary bridge */ - unsigned char subordinate; /* max number of subordinate buses */ unsigned char max_bus_speed; /* enum pci_bus_speed */ unsigned char cur_bus_speed; /* enum pci_bus_speed */ @@ -474,6 +485,32 @@ static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; #define PCIBIOS_SET_FAILED 0x88 #define PCIBIOS_BUFFER_TOO_SMALL 0x89 +/* + * Translate above to generic errno for passing back through non-pci. + */ +static inline int pcibios_err_to_errno(int err) +{ + if (err <= PCIBIOS_SUCCESSFUL) + return err; /* Assume already errno */ + + switch (err) { + case PCIBIOS_FUNC_NOT_SUPPORTED: + return -ENOENT; + case PCIBIOS_BAD_VENDOR_ID: + return -EINVAL; + case PCIBIOS_DEVICE_NOT_FOUND: + return -ENODEV; + case PCIBIOS_BAD_REGISTER_NUMBER: + return -EFAULT; + case PCIBIOS_SET_FAILED: + return -EIO; + case PCIBIOS_BUFFER_TOO_SMALL: + return -ENOSPC; + } + + return -ENOTTY; +} + /* Low-level architecture-dependent routines */ struct pci_ops { @@ -642,6 +679,7 @@ extern int no_pci_devices(void); void pcibios_fixup_bus(struct pci_bus *); int __must_check pcibios_enable_device(struct pci_dev *, int mask); +/* Architecture specific versions may override this (weak) */ char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ @@ -668,6 +706,9 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); +int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax); +int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax); +void pci_bus_release_busn_res(struct pci_bus *b); struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); @@ -714,8 +755,6 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); -int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, - int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); @@ -777,6 +816,14 @@ static inline int pci_write_config_dword(const struct pci_dev *dev, int where, return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); } +/* user-space driven config access */ +int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); +int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); +int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val); +int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val); +int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val); +int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); + int __must_check pci_enable_device(struct pci_dev *dev); int __must_check pci_enable_device_io(struct pci_dev *dev); int __must_check pci_enable_device_mem(struct pci_dev *dev); @@ -875,7 +922,6 @@ enum pci_obff_signal_type { int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); void pci_disable_obff(struct pci_dev *dev); -bool pci_ltr_supported(struct pci_dev *dev); int pci_enable_ltr(struct pci_dev *dev); void pci_disable_ltr(struct pci_dev *dev); int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns); @@ -1332,6 +1378,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } +static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) +{ return NULL; } + #define dev_is_pci(d) (false) #define dev_is_pf(d) (false) #define dev_num_vf(d) (0) @@ -1486,9 +1535,20 @@ enum pci_fixup_pass { #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +struct pci_dev *pci_get_dma_source(struct pci_dev *dev); +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags); #else static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + return pci_dev_get(dev); +} +static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev, + u16 acs_flags) +{ + return -ENOTTY; +} #endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); @@ -1591,7 +1651,9 @@ static inline bool pci_is_pcie(struct pci_dev *dev) } void pci_request_acs(void); - +bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags); +bool pci_acs_path_enabled(struct pci_dev *start, + struct pci_dev *end, u16 acs_flags); #define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */ #define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ab741b0d007..fc352607734 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -517,6 +517,7 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403 #define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 @@ -2755,6 +2756,17 @@ #define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 #define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e #define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f +#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46 +#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0 +#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1 +#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4 +#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5 +#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41 +#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42 +#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45 +#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f54341..7fb75b14375 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -26,6 +26,7 @@ * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ +#define PCI_STD_HEADER_SIZEOF 64 #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ @@ -125,7 +126,8 @@ #define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ #define PCI_IO_RANGE_TYPE_16 0x00 #define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */ +#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */ #define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ #define PCI_MEMORY_BASE 0x20 /* Memory range behind */ #define PCI_MEMORY_LIMIT 0x22 @@ -209,9 +211,12 @@ #define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ #define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_ID_MAX PCI_CAP_ID_AF #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 @@ -276,6 +281,7 @@ #define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ #define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ #define PCI_VPD_DATA 4 /* 32-bits of data returned here */ +#define PCI_CAP_VPD_SIZEOF 8 /* Slot Identification */ @@ -297,8 +303,10 @@ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ #define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ #define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ /* MSI-X registers */ #define PCI_MSIX_FLAGS 2 @@ -308,6 +316,7 @@ #define PCI_MSIX_TABLE 4 #define PCI_MSIX_PBA 8 #define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ /* MSI-X entry's format */ #define PCI_MSIX_ENTRY_SIZE 16 @@ -338,6 +347,7 @@ #define PCI_AF_CTRL_FLR 0x01 #define PCI_AF_STATUS 5 #define PCI_AF_STATUS_TP 0x01 +#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ /* PCI-X registers */ @@ -374,6 +384,10 @@ #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ +#define PCI_X_ECC_CSR 8 /* ECC control and status */ +#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */ +#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ +#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ /* PCI Bridge Subsystem ID registers */ @@ -462,6 +476,7 @@ #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ @@ -507,6 +522,12 @@ #define PCI_EXP_RTSTA 32 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +/* + * Note that the following PCI Express 'Capability Structure' registers + * were introduced with 'Capability Version' 0x2 (v2). These registers + * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() + * to use these fields safely. + */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ @@ -521,6 +542,12 @@ #define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ #define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ +#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ @@ -529,23 +556,43 @@ #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) #define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) -#define PCI_EXT_CAP_ID_ERR 1 -#define PCI_EXT_CAP_ID_VC 2 -#define PCI_EXT_CAP_ID_DSN 3 -#define PCI_EXT_CAP_ID_PWR 4 -#define PCI_EXT_CAP_ID_VNDR 11 -#define PCI_EXT_CAP_ID_ACS 13 -#define PCI_EXT_CAP_ID_ARI 14 -#define PCI_EXT_CAP_ID_ATS 15 -#define PCI_EXT_CAP_ID_SRIOV 16 -#define PCI_EXT_CAP_ID_PRI 19 -#define PCI_EXT_CAP_ID_LTR 24 -#define PCI_EXT_CAP_ID_PASID 27 +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */ +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */ +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID + +#define PCI_EXT_CAP_DSN_SIZEOF 12 +#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ #define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ #define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ @@ -555,6 +602,11 @@ #define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ #define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ #define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */ +#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */ +#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ +#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ +#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ #define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ /* Same bits as above */ #define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ @@ -565,6 +617,9 @@ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ #define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ #define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ +#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ +#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ #define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ /* Same bits as above */ #define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ @@ -596,12 +651,18 @@ /* Virtual Channel */ #define PCI_VC_PORT_REG1 4 +#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */ #define PCI_VC_PORT_REG2 8 +#define PCI_VC_REG2_32_PHASE 0x2 +#define PCI_VC_REG2_64_PHASE 0x4 +#define PCI_VC_REG2_128_PHASE 0x8 #define PCI_VC_PORT_CTRL 12 #define PCI_VC_PORT_STATUS 14 #define PCI_VC_RES_CAP 16 #define PCI_VC_RES_CTRL 20 #define PCI_VC_RES_STATUS 26 +#define PCI_CAP_VC_BASE_SIZEOF 0x10 +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C /* Power Budgeting */ #define PCI_PWR_DSR 4 /* Data Select Register */ @@ -614,6 +675,7 @@ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ #define PCI_PWR_CAP 12 /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ +#define PCI_EXT_CAP_PWR_SIZEOF 16 /* * Hypertransport sub capability types @@ -646,6 +708,8 @@ #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ #define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ #define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ +#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ +#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ /* Alternative Routing-ID Interpretation */ #define PCI_ARI_CAP 0x04 /* ARI Capability Register */ @@ -656,6 +720,7 @@ #define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ #define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ #define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ +#define PCI_EXT_CAP_ARI_SIZEOF 8 /* Address Translation Service */ #define PCI_ATS_CAP 0x04 /* ATS Capability Register */ @@ -665,6 +730,7 @@ #define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ #define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ #define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ +#define PCI_EXT_CAP_ATS_SIZEOF 8 /* Page Request Interface */ #define PCI_PRI_CTRL 0x04 /* PRI control register */ @@ -676,6 +742,7 @@ #define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ #define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ +#define PCI_EXT_CAP_PRI_SIZEOF 16 /* PASID capability */ #define PCI_PASID_CAP 0x04 /* PASID feature register */ @@ -685,6 +752,7 @@ #define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ #define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ #define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */ +#define PCI_EXT_CAP_PASID_SIZEOF 8 /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ @@ -716,12 +784,14 @@ #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ +#define PCI_EXT_CAP_SRIOV_SIZEOF 64 #define PCI_LTR_MAX_SNOOP_LAT 0x4 #define PCI_LTR_MAX_NOSNOOP_LAT 0x6 #define PCI_LTR_VALUE_MASK 0x000003ff #define PCI_LTR_SCALE_MASK 0x00001c00 #define PCI_LTR_SCALE_SHIFT 10 +#define PCI_EXT_CAP_LTR_SIZEOF 8 /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ @@ -732,7 +802,38 @@ #define PCI_ACS_UF 0x10 /* Upstream Forwarding */ #define PCI_ACS_EC 0x20 /* P2P Egress Control */ #define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ +#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */ +#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ + +/* sata capability */ +#define PCI_SATA_REGS 4 /* SATA REGs specifier */ +#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ +#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ +#define PCI_SATA_SIZEOF_SHORT 8 +#define PCI_SATA_SIZEOF_LONG 16 + +/* resizable BARs */ +#define PCI_REBAR_CTRL 8 /* control register */ +#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */ +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */ + +/* dynamic power allocation */ +#define PCI_DPA_CAP 4 /* capability register */ +#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ +#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ + +/* TPH Requester */ +#define PCI_TPH_CAP 4 /* capability register */ +#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ +#define PCI_TPH_LOC_NONE 0x000 /* no location */ +#define PCI_TPH_LOC_CAP 0x200 /* in capability */ +#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ +#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 45db49f64bb..76c5c8b724a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -677,6 +677,7 @@ struct hw_perf_event { u64 last_tag; unsigned long config_base; unsigned long event_base; + int event_base_rdpmc; int idx; int last_cpu; @@ -1106,6 +1107,8 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, struct task_struct *task, perf_overflow_handler_t callback, void *context); +extern void perf_pmu_migrate_context(struct pmu *pmu, + int src_cpu, int dst_cpu); extern u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running); diff --git a/include/linux/phy.h b/include/linux/phy.h index c291cae8ce3..93b3cf77f56 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -243,6 +243,15 @@ enum phy_state { PHY_RESUMING }; +/** + * struct phy_c45_device_ids - 802.3-c45 Device Identifiers + * @devices_in_package: Bit vector of devices present. + * @device_ids: The device identifer for each present device. + */ +struct phy_c45_device_ids { + u32 devices_in_package; + u32 device_ids[8]; +}; /* phy_device: An instance of a PHY * @@ -250,6 +259,8 @@ enum phy_state { * bus: Pointer to the bus this PHY is on * dev: driver model device structure for this PHY * phy_id: UID for this device found during discovery + * c45_ids: 802.3-c45 Device Identifers if is_c45. + * is_c45: Set to true if this phy uses clause 45 addressing. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * addr: Bus address of PHY @@ -285,6 +296,9 @@ struct phy_device { u32 phy_id; + struct phy_c45_device_ids c45_ids; + bool is_c45; + enum phy_state state; u32 dev_flags; @@ -412,6 +426,12 @@ struct phy_driver { /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); + /* Returns true if this is a suitable driver for the given + * phydev. If NULL, matching is based on phy_id and + * phy_id_mask. + */ + int (*match_phy_device)(struct phy_device *phydev); + /* Handles ethtool queries for hardware time stamping. */ int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); @@ -480,7 +500,9 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } -struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids); +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, @@ -511,7 +533,9 @@ int genphy_read_status(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); void phy_driver_unregister(struct phy_driver *drv); +void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver); +int phy_drivers_register(struct phy_driver *new_driver, int n); void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); @@ -532,6 +556,11 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_scan_fixups(struct phy_device *phydev); +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); +int phy_get_eee_err(struct phy_device *phydev); +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); + int __init mdio_bus_init(void); void mdio_bus_exit(void); diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 3b894a668d3..69393a66253 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -131,8 +131,9 @@ extern void pinctrl_unregister(struct pinctrl_dev *pctldev); extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin); extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range); -extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range); +extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *ranges, + unsigned nranges); extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index defbde203d0..082eafaf026 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -451,8 +451,10 @@ enum { #define TCF_EM_U32 3 #define TCF_EM_META 4 #define TCF_EM_TEXT 5 -#define TCF_EM_VLAN 6 -#define TCF_EM_MAX 6 +#define TCF_EM_VLAN 6 +#define TCF_EM_CANID 7 +#define TCF_EM_IPSET 8 +#define TCF_EM_MAX 8 enum { TCF_EM_PROG_TC diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h new file mode 100644 index 00000000000..eabfdcb2699 --- /dev/null +++ b/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h new file mode 100644 index 00000000000..e7a1949bad2 --- /dev/null +++ b/include/linux/platform_data/atmel-aes.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_ATMEL_AES_H +#define __LINUX_ATMEL_AES_H + +#include <mach/at_hdmac.h> + +/** + * struct aes_dma_data - DMA data for AES + */ +struct aes_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct aes_platform_data - board-specific AES configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct aes_platform_data { + struct aes_dma_data *dma_slave; +}; + +#endif /* __LINUX_ATMEL_AES_H */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h new file mode 100644 index 00000000000..83fe9c283bb --- /dev/null +++ b/include/linux/platform_data/clk-integrator.h @@ -0,0 +1 @@ +void integrator_clk_init(bool is_cp); diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h new file mode 100644 index 00000000000..5713c87b247 --- /dev/null +++ b/include/linux/platform_data/clk-nomadik.h @@ -0,0 +1,2 @@ +/* Minimal platform data header */ +void nomadik_clk_init(void); diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h new file mode 100644 index 00000000000..8429e73911a --- /dev/null +++ b/include/linux/platform_data/clk-u300.h @@ -0,0 +1 @@ +void __init u300_clk_init(void __iomem *base); diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h new file mode 100644 index 00000000000..0f25d165abd --- /dev/null +++ b/include/linux/platform_data/mmp_audio.h @@ -0,0 +1,22 @@ +/* + * MMP Platform AUDIO Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_AUDIO_H +#define MMP_AUDIO_H + +struct mmp_audio_platdata { + u32 period_max_capture; + u32 buffer_max_capture; + u32 period_max_playback; + u32 buffer_max_playback; +}; + +#endif /* MMP_AUDIO_H */ diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h new file mode 100644 index 00000000000..3da73bdc203 --- /dev/null +++ b/include/linux/platform_data/omap_drm.h @@ -0,0 +1,52 @@ +/* + * DRM/KMS platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_OMAP_DRM_H__ +#define __PLATFORM_DATA_OMAP_DRM_H__ + +/* + * Optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ + int ovl_cnt; + const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + + int mgr_cnt; + const int *mgr_ids; + + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + struct omap_kms_platform_data *kms_pdata; +}; + +#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h index 97ec12c2ded..8b79e0967f9 100644 --- a/include/linux/platform_data/s3c-hsotg.h +++ b/include/linux/platform_data/s3c-hsotg.h @@ -12,6 +12,9 @@ * published by the Free Software Foundation. */ +#ifndef __LINUX_USB_S3C_HSOTG_H +#define __LINUX_USB_S3C_HSOTG_H + enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ @@ -33,3 +36,5 @@ struct s3c_hsotg_plat { }; extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); + +#endif /* __LINUX_USB_S3C_HSOTG_H */ diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 30f794eb382..a7d6172922d 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -15,6 +15,7 @@ #include <linux/err.h> #include <linux/of.h> #include <linux/notifier.h> +#include <linux/cpuidle.h> enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ @@ -45,6 +46,11 @@ struct gpd_dev_ops { bool (*active_wakeup)(struct device *dev); }; +struct gpd_cpu_data { + unsigned int saved_exit_latency; + struct cpuidle_state *idle_state; +}; + struct generic_pm_domain { struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ @@ -75,6 +81,7 @@ struct generic_pm_domain { bool max_off_time_changed; bool cached_power_down_ok; struct device_node *of_node; /* Node in device tree */ + struct gpd_cpu_data *cpu_data; }; static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) @@ -105,6 +112,7 @@ struct generic_pm_domain_data { struct gpd_timing_data td; struct notifier_block nb; struct mutex lock; + unsigned int refcount; bool need_restore; bool always_on; }; @@ -155,6 +163,8 @@ extern int pm_genpd_add_callbacks(struct device *dev, struct gpd_dev_ops *ops, struct gpd_timing_data *td); extern int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td); +extern int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state); +extern int genpd_detach_cpuidle(struct generic_pm_domain *genpd); extern void pm_genpd_init(struct generic_pm_domain *genpd, struct dev_power_governor *gov, bool is_off); @@ -211,6 +221,14 @@ static inline int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td) { return -ENOSYS; } +static inline int genpd_attach_cpuidle(struct generic_pm_domain *genpd, int st) +{ + return -ENOSYS; +} +static inline int genpd_detach_cpuidle(struct generic_pm_domain *genpd) +{ + return -ENOSYS; +} static inline void pm_genpd_init(struct generic_pm_domain *genpd, struct dev_power_governor *gov, bool is_off) { diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h index 233149cb19f..9924ea1f22e 100644 --- a/include/linux/pm_qos.h +++ b/include/linux/pm_qos.h @@ -66,7 +66,7 @@ enum pm_qos_req_action { static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) { - return req->dev != 0; + return req->dev != NULL; } int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h index f04c98cf44f..988f76e636e 100644 --- a/include/linux/posix_types.h +++ b/include/linux/posix_types.h @@ -15,26 +15,14 @@ */ /* - * Those macros may have been defined in <gnu/types.h>. But we always - * use the ones here. + * This macro may have been defined in <gnu/types.h>. But we always + * use the one here. */ -#undef __NFDBITS -#define __NFDBITS (8 * sizeof(unsigned long)) - #undef __FD_SETSIZE #define __FD_SETSIZE 1024 -#undef __FDSET_LONGS -#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS) - -#undef __FDELT -#define __FDELT(d) ((d) / __NFDBITS) - -#undef __FDMASK -#define __FDMASK(d) (1UL << ((d) % __NFDBITS)) - typedef struct { - unsigned long fds_bits [__FDSET_LONGS]; + unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))]; } __kernel_fd_set; /* Type of a signal handler. */ diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h new file mode 100644 index 00000000000..3101e62a121 --- /dev/null +++ b/include/linux/power/smartreflex.h @@ -0,0 +1,308 @@ +/* + * OMAP Smartreflex Defines and Routines + * + * Author: Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M <x0080970@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __POWER_SMARTREFLEX_H +#define __POWER_SMARTREFLEX_H + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <plat/voltage.h> + +/* + * Different Smartreflex IPs version. The v1 is the 65nm version used in + * OMAP3430. The v2 is the update for the 45nm version of the IP + * used in OMAP3630 and OMAP4430 + */ +#define SR_TYPE_V1 1 +#define SR_TYPE_V2 2 + +/* SMART REFLEX REG ADDRESS OFFSET */ +#define SRCONFIG 0x00 +#define SRSTATUS 0x04 +#define SENVAL 0x08 +#define SENMIN 0x0C +#define SENMAX 0x10 +#define SENAVG 0x14 +#define AVGWEIGHT 0x18 +#define NVALUERECIPROCAL 0x1c +#define SENERROR_V1 0x20 +#define ERRCONFIG_V1 0x24 +#define IRQ_EOI 0x20 +#define IRQSTATUS_RAW 0x24 +#define IRQSTATUS 0x28 +#define IRQENABLE_SET 0x2C +#define IRQENABLE_CLR 0x30 +#define SENERROR_V2 0x34 +#define ERRCONFIG_V2 0x38 + +/* Bit/Shift Positions */ + +/* SRCONFIG */ +#define SRCONFIG_ACCUMDATA_SHIFT 22 +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 +#define SRCONFIG_SENNENABLE_V1_SHIFT 5 +#define SRCONFIG_SENPENABLE_V1_SHIFT 3 +#define SRCONFIG_SENNENABLE_V2_SHIFT 1 +#define SRCONFIG_SENPENABLE_V2_SHIFT 0 +#define SRCONFIG_CLKCTRL_SHIFT 0 + +#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) + +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) +#define SRCONFIG_DELAYCTRL BIT(2) + +/* AVGWEIGHT */ +#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 +#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 + +/* NVALUERECIPROCAL */ +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 + +/* ERRCONFIG */ +#define ERRCONFIG_ERRWEIGHT_SHIFT 16 +#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 +#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 + +#define SR_ERRWEIGHT_MASK (0x07 << 16) +#define SR_ERRMAXLIMIT_MASK (0xff << 8) +#define SR_ERRMINLIMIT_MASK (0xff << 0) + +#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) +#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) +#define ERRCONFIG_MCUACCUMINTEN BIT(29) +#define ERRCONFIG_MCUACCUMINTST BIT(28) +#define ERRCONFIG_MCUVALIDINTEN BIT(27) +#define ERRCONFIG_MCUVALIDINTST BIT(26) +#define ERRCONFIG_MCUBOUNDINTEN BIT(25) +#define ERRCONFIG_MCUBOUNDINTST BIT(24) +#define ERRCONFIG_MCUDISACKINTEN BIT(23) +#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) +#define ERRCONFIG_MCUDISACKINTST BIT(22) +#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) + +#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ + ERRCONFIG_MCUACCUMINTST | \ + ERRCONFIG_MCUVALIDINTST | \ + ERRCONFIG_MCUBOUNDINTST | \ + ERRCONFIG_MCUDISACKINTST) +/* IRQSTATUS */ +#define IRQSTATUS_MCUACCUMINT BIT(3) +#define IRQSTATUS_MCVALIDINT BIT(2) +#define IRQSTATUS_MCBOUNDSINT BIT(1) +#define IRQSTATUS_MCUDISABLEACKINT BIT(0) + +/* IRQENABLE_SET and IRQENABLE_CLEAR */ +#define IRQENABLE_MCUACCUMINT BIT(3) +#define IRQENABLE_MCUVALIDINT BIT(2) +#define IRQENABLE_MCUBOUNDSINT BIT(1) +#define IRQENABLE_MCUDISABLEACKINT BIT(0) + +/* Common Bit values */ + +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 + +/* + * 3430 specific values. Maybe these should be passed from board file or + * pmic structures. + */ +#define OMAP3430_SR_ACCUMDATA 0x1f4 + +#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 +#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 + +#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 +#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 + +#define OMAP3430_SR_ERRWEIGHT 0x04 +#define OMAP3430_SR_ERRMAXLIMIT 0x02 + +struct omap_sr { + char *name; + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; + int srid; + int ip_type; + int nvalue_count; + bool autocomp_active; + u32 clk_length; + u32 err_weight; + u32 err_minlimit; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + u32 senp_mod; + u32 senn_mod; + void __iomem *base; +}; + +/** + * test_cond_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + * + * Copied from omap_test_timeout */ +#define sr_test_cond_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + +/** + * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass + * pmic specific info to smartreflex driver + * + * @sr_pmic_init: API to initialize smartreflex on the PMIC side. + */ +struct omap_sr_pmic_data { + void (*sr_pmic_init) (void); +}; + +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + +#ifdef CONFIG_POWER_AVS_OMAP +/* + * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. + * The smartreflex class driver should pass the class type. + * Should be used to populate the class_type field of the + * omap_smartreflex_class_data structure. + */ +#define SR_CLASS1 0x1 +#define SR_CLASS2 0x2 +#define SR_CLASS3 0x3 + +/** + * struct omap_sr_class_data - Smartreflex class driver info + * + * @enable: API to enable a particular class smaartreflex. + * @disable: API to disable a particular class smartreflex. + * @configure: API to configure a particular class smartreflex. + * @notify: API to notify the class driver about an event in SR. + * Not needed for class3. + * @notify_flags: specify the events to be notified to the class driver + * @class_type: specify which smartreflex class. + * Can be used by the SR driver to take any class + * based decisions. + */ +struct omap_sr_class_data { + int (*enable)(struct omap_sr *sr); + int (*disable)(struct omap_sr *sr, int is_volt_reset); + int (*configure)(struct omap_sr *sr); + int (*notify)(struct omap_sr *sr, u32 status); + u8 notify_flags; + u8 class_type; +}; + +/** + * struct omap_sr_nvalue_table - Smartreflex n-target value info + * + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target + * @volt_nominal: microvolts DC that the VDD is initially programmed to + */ +struct omap_sr_nvalue_table { + u32 efuse_offs; + u32 nvalue; + u32 errminlimit; + unsigned long volt_nominal; +}; + +/** + * struct omap_sr_data - Smartreflex platform data. + * + * @name: instance name + * @ip_type: Smartreflex IP type. + * @senp_mod: SENPENABLE value for the sr + * @senn_mod: SENNENABLE value for sr + * @nvalue_count: Number of distinct nvalues in the nvalue table + * @enable_on_init: whether this sr module needs to enabled at + * boot up or not. + * @nvalue_table: table containing the efuse offsets and nvalues + * corresponding to them. + * @voltdm: Pointer to the voltage domain associated with the SR + */ +struct omap_sr_data { + const char *name; + int ip_type; + u32 senp_mod; + u32 senn_mod; + int nvalue_count; + bool enable_on_init; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; +}; + +/* Smartreflex module enable/disable interface */ +void omap_sr_enable(struct voltagedomain *voltdm); +void omap_sr_disable(struct voltagedomain *voltdm); +void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); + +/* API to register the pmic specific data with the smartreflex driver. */ +void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); + +/* Smartreflex driver hooks to be called from Smartreflex class driver */ +int sr_enable(struct voltagedomain *voltdm, unsigned long volt); +void sr_disable(struct voltagedomain *voltdm); +int sr_configure_errgen(struct voltagedomain *voltdm); +int sr_disable_errgen(struct voltagedomain *voltdm); +int sr_configure_minmax(struct voltagedomain *voltdm); + +/* API to register the smartreflex class driver with the smartreflex driver */ +int sr_register_class(struct omap_sr_class_data *class_data); +#else +static inline void omap_sr_enable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable_reset_volt( + struct voltagedomain *voltdm) {} +static inline void omap_sr_register_pmic( + struct omap_sr_pmic_data *pmic_data) {} +#endif +#endif diff --git a/include/linux/pstore.h b/include/linux/pstore.h index e1461e143be..c892587d9b8 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -24,14 +24,22 @@ #include <linux/time.h> #include <linux/kmsg_dump.h> +#include <linux/mutex.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/errno.h> /* types */ enum pstore_type_id { PSTORE_TYPE_DMESG = 0, PSTORE_TYPE_MCE = 1, + PSTORE_TYPE_CONSOLE = 2, + PSTORE_TYPE_FTRACE = 3, PSTORE_TYPE_UNKNOWN = 255 }; +struct module; + struct pstore_info { struct module *owner; char *name; @@ -47,11 +55,23 @@ struct pstore_info { int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, size_t size, struct pstore_info *psi); + int (*write_buf)(enum pstore_type_id type, + enum kmsg_dump_reason reason, u64 *id, + unsigned int part, const char *buf, size_t size, + struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, struct pstore_info *psi); void *data; }; + +#ifdef CONFIG_PSTORE_FTRACE +extern void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip); +#else +static inline void pstore_ftrace_call(unsigned long ip, unsigned long parent_ip) +{ } +#endif + #ifdef CONFIG_PSTORE extern int pstore_register(struct pstore_info *); #else diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 3b823d49a85..098d2a83829 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -24,21 +24,7 @@ #include <linux/init.h> struct persistent_ram_buffer; - -struct persistent_ram_descriptor { - const char *name; - phys_addr_t size; -}; - -struct persistent_ram { - phys_addr_t start; - phys_addr_t size; - - int num_descs; - struct persistent_ram_descriptor *descs; - - struct list_head node; -}; +struct rs_control; struct persistent_ram_zone { phys_addr_t paddr; @@ -48,7 +34,6 @@ struct persistent_ram_zone { size_t buffer_size; /* ECC correction */ - bool ecc; char *par_buffer; char *par_header; struct rs_control *rs_decoder; @@ -56,22 +41,16 @@ struct persistent_ram_zone { int bad_blocks; int ecc_block_size; int ecc_size; - int ecc_symsize; - int ecc_poly; char *old_log; size_t old_log_size; }; -int persistent_ram_early_init(struct persistent_ram *ram); - -struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, - size_t size, - bool ecc); +struct persistent_ram_zone * __devinit persistent_ram_new(phys_addr_t start, + size_t size, u32 sig, + int ecc_size); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); -struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev, - bool ecc); int persistent_ram_write(struct persistent_ram_zone *prz, const void *s, unsigned int count); @@ -93,8 +72,10 @@ struct ramoops_platform_data { unsigned long mem_size; unsigned long mem_address; unsigned long record_size; + unsigned long console_size; + unsigned long ftrace_size; int dump_oops; - bool ecc; + int ecc_size; }; #endif diff --git a/include/linux/quota.h b/include/linux/quota.h index c09fa042b5e..524ede8a160 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -333,7 +333,7 @@ struct quotactl_ops { int (*quota_on)(struct super_block *, int, int, struct path *); int (*quota_on_meta)(struct super_block *, int, int); int (*quota_off)(struct super_block *, int); - int (*quota_sync)(struct super_block *, int, int); + int (*quota_sync)(struct super_block *, int); int (*get_info)(struct super_block *, int, struct if_dqinfo *); int (*set_info)(struct super_block *, int, struct if_dqinfo *); int (*get_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *); diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 17b977304a0..ec6b65feaab 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -83,7 +83,8 @@ int dquot_quota_on(struct super_block *sb, int type, int format_id, int dquot_quota_on_mount(struct super_block *sb, char *qf_name, int format_id, int type); int dquot_quota_off(struct super_block *sb, int type); -int dquot_quota_sync(struct super_block *sb, int type, int wait); +int dquot_writeback_dquots(struct super_block *sb, int type); +int dquot_quota_sync(struct super_block *sb, int type); int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_get_dqblk(struct super_block *sb, int type, qid_t id, @@ -255,6 +256,11 @@ static inline int dquot_resume(struct super_block *sb, int type) #define dquot_file_open generic_file_open +static inline int dquot_writeback_dquots(struct super_block *sb, int type) +{ + return 0; +} + #endif /* CONFIG_QUOTA */ static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 9cac722b169..115ead2b515 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -147,6 +147,7 @@ extern void synchronize_sched(void); extern void __rcu_read_lock(void); extern void __rcu_read_unlock(void); +extern void rcu_read_unlock_special(struct task_struct *t); void synchronize_rcu(void); /* @@ -255,6 +256,10 @@ static inline void destroy_rcu_head_on_stack(struct rcu_head *head) } #endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ +#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) +extern int rcu_is_cpu_idle(void); +#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) */ + #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) bool rcu_lockdep_current_cpu_online(void); #else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */ @@ -266,15 +271,6 @@ static inline bool rcu_lockdep_current_cpu_online(void) #ifdef CONFIG_DEBUG_LOCK_ALLOC -#ifdef CONFIG_PROVE_RCU -extern int rcu_is_cpu_idle(void); -#else /* !CONFIG_PROVE_RCU */ -static inline int rcu_is_cpu_idle(void) -{ - return 0; -} -#endif /* else !CONFIG_PROVE_RCU */ - static inline void rcu_lock_acquire(struct lockdep_map *map) { lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_); @@ -431,8 +427,7 @@ extern int rcu_my_thread_group_empty(void); static inline void rcu_preempt_sleep_check(void) { rcu_lockdep_assert(!lock_is_held(&rcu_lock_map), - "Illegal context switch in RCU read-side " - "critical section"); + "Illegal context switch in RCU read-side critical section"); } #else /* #ifdef CONFIG_PROVE_RCU */ static inline void rcu_preempt_sleep_check(void) @@ -513,10 +508,10 @@ static inline void rcu_preempt_sleep_check(void) (_________p1); \ }) #define __rcu_assign_pointer(p, v, space) \ - ({ \ + do { \ smp_wmb(); \ (p) = (typeof(*v) __force space *)(v); \ - }) + } while (0) /** @@ -851,7 +846,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * * Assigns the specified value to the specified RCU-protected * pointer, ensuring that any concurrent RCU readers will see - * any prior initialization. Returns the value assigned. + * any prior initialization. * * Inserts memory barriers on architectures that require them * (which is most of them), and also prevents the compiler from @@ -903,25 +898,17 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * the reader-accessible portions of the linked structure. */ #define RCU_INIT_POINTER(p, v) \ - p = (typeof(*v) __force __rcu *)(v) - -static __always_inline bool __is_kfree_rcu_offset(unsigned long offset) -{ - return offset < 4096; -} - -static __always_inline -void __kfree_rcu(struct rcu_head *head, unsigned long offset) -{ - typedef void (*rcu_callback)(struct rcu_head *); - - BUILD_BUG_ON(!__builtin_constant_p(offset)); - - /* See the kfree_rcu() header comment. */ - BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); + do { \ + p = (typeof(*v) __force __rcu *)(v); \ + } while (0) - kfree_call_rcu(head, (rcu_callback)offset); -} +/** + * RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer + * + * GCC-style initialization for an RCU-protected pointer in a structure field. + */ +#define RCU_POINTER_INITIALIZER(p, v) \ + .p = (typeof(*v) __force __rcu *)(v) /* * Does the specified offset indicate that the corresponding rcu_head @@ -935,7 +922,7 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) #define __kfree_rcu(head, offset) \ do { \ BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); \ - call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \ + kfree_call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \ } while (0) /** diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 56af22ec9ab..7f7e00df3ad 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -14,12 +14,14 @@ */ #include <linux/list.h> +#include <linux/rbtree.h> struct module; struct device; struct i2c_client; struct spi_device; struct regmap; +struct regmap_range_cfg; /* An enum of all the supported cache types */ enum regcache_type { @@ -43,6 +45,14 @@ struct reg_default { #ifdef CONFIG_REGMAP +enum regmap_endian { + /* Unspecified -> 0 -> Backwards compatible default */ + REGMAP_ENDIAN_DEFAULT = 0, + REGMAP_ENDIAN_BIG, + REGMAP_ENDIAN_LITTLE, + REGMAP_ENDIAN_NATIVE, +}; + /** * Configuration for the register map of a device. * @@ -84,6 +94,15 @@ struct reg_default { * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * @reg_format_endian: Endianness for formatted register addresses. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * @val_format_endian: Endianness for formatted register values. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * + * @ranges: Array of configuration entries for virtual address ranges. + * @num_ranges: Number of range configuration entries. */ struct regmap_config { const char *name; @@ -109,6 +128,43 @@ struct regmap_config { u8 write_flag_mask; bool use_single_rw; + + enum regmap_endian reg_format_endian; + enum regmap_endian val_format_endian; + + const struct regmap_range_cfg *ranges; + unsigned int n_ranges; +}; + +/** + * Configuration for indirectly accessed or paged registers. + * Registers, mapped to this virtual range, are accessed in two steps: + * 1. page selector register update; + * 2. access through data window registers. + * + * @range_min: Address of the lowest register address in virtual range. + * @range_max: Address of the highest register in virtual range. + * + * @page_sel_reg: Register with selector field. + * @page_sel_mask: Bit shift for selector value. + * @page_sel_shift: Bit mask for selector value. + * + * @window_start: Address of first (lowest) register in data window. + * @window_len: Number of registers in data window. + */ +struct regmap_range_cfg { + /* Registers of virtual address range */ + unsigned int range_min; + unsigned int range_max; + + /* Page selector for indirect addressing */ + unsigned int selector_reg; + unsigned int selector_mask; + int selector_shift; + + /* Data window (per each page) */ + unsigned int window_start; + unsigned int window_len; }; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -133,6 +189,12 @@ typedef void (*regmap_hw_free_context)(void *context); * data. * @read_flag_mask: Mask to be set in the top byte of the register when doing * a read. + * @reg_format_endian_default: Default endianness for formatted register + * addresses. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. + * @val_format_endian_default: Default endianness for formatted register + * values. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. */ struct regmap_bus { bool fast_io; @@ -141,6 +203,8 @@ struct regmap_bus { regmap_hw_read read; regmap_hw_free_context free_context; u8 read_flag_mask; + enum regmap_endian reg_format_endian_default; + enum regmap_endian val_format_endian_default; }; struct regmap *regmap_init(struct device *dev, @@ -219,6 +283,7 @@ struct regmap_irq { * @status_base: Base status register address. * @mask_base: Base mask register address. * @ack_base: Base ack address. If zero then the chip is clear on read. + * @wake_base: Base address for wake enables. If zero unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * * @num_regs: Number of registers in each control bank. @@ -232,6 +297,7 @@ struct regmap_irq_chip { unsigned int status_base; unsigned int mask_base; unsigned int ack_base; + unsigned int wake_base; unsigned int irq_reg_stride; int num_regs; @@ -243,7 +309,7 @@ struct regmap_irq_chip { struct regmap_irq_chip_data; int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, - int irq_base, struct regmap_irq_chip *chip, + int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); @@ -361,7 +427,6 @@ static inline int regmap_register_patch(struct regmap *map, static inline struct regmap *dev_get_regmap(struct device *dev, const char *name) { - WARN_ONCE(1, "regmap API is disabled"); return NULL; } diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 4ed1b30ac5f..da339fd8c75 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -291,6 +291,12 @@ static inline int regulator_set_voltage(struct regulator *regulator, static inline int regulator_get_voltage(struct regulator *regulator) { + return -EINVAL; +} + +static inline int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ return 0; } diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b0432cc2b16..bac4c871f3b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -32,6 +32,8 @@ enum regulator_status { REGULATOR_STATUS_NORMAL, REGULATOR_STATUS_IDLE, REGULATOR_STATUS_STANDBY, + /* in case that any other status doesn't apply */ + REGULATOR_STATUS_UNDEFINED, }; /** @@ -67,6 +69,8 @@ enum regulator_status { * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. + * @set_ramp_delay: Set the ramp delay for the regulator. The driver should + * select ramp delay equal to or less than(closest) ramp_delay. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the @@ -113,6 +117,7 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); @@ -170,11 +175,15 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops + * + * @enable_time: Time taken for initial enable of regulator (in uS). */ struct regulator_desc { const char *name; @@ -188,11 +197,16 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int ramp_delay; + + const unsigned int *volt_table; unsigned int vsel_reg; unsigned int vsel_mask; unsigned int enable_reg; unsigned int enable_mask; + + unsigned int enable_time; }; /** @@ -208,6 +222,9 @@ struct regulator_desc { * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). * @regmap: regmap to use for core regmap helpers + * @ena_gpio: GPIO controlling regulator enable. + * @ena_gpio_invert: Sense for GPIO enable control. + * @ena_gpio_flags: Flags to use when calling gpio_request_one() */ struct regulator_config { struct device *dev; @@ -215,6 +232,10 @@ struct regulator_config { void *driver_data; struct device_node *of_node; struct regmap *regmap; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_flags; }; /* @@ -253,6 +274,10 @@ struct regulator_dev { void *reg_data; /* regulator_dev data */ struct dentry *debugfs; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_state:1; }; struct regulator_dev * @@ -271,6 +296,8 @@ int regulator_mode_to_status(unsigned int); int regulator_list_voltage_linear(struct regulator_dev *rdev, unsigned int selector); +int regulator_list_voltage_table(struct regulator_dev *rdev, + unsigned int selector); int regulator_map_voltage_linear(struct regulator_dev *rdev, int min_uV, int max_uV); int regulator_map_voltage_iterate(struct regulator_dev *rdev, @@ -280,6 +307,9 @@ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); int regulator_is_enabled_regmap(struct regulator_dev *rdev); int regulator_enable_regmap(struct regulator_dev *rdev); int regulator_disable_regmap(struct regulator_dev *rdev); +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index f83f7440b48..48918be649d 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -22,6 +22,7 @@ struct regulator_init_data; /** * struct fixed_voltage_config - fixed_voltage_config structure * @supply_name: Name of the regulator supply + * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used @@ -46,6 +47,7 @@ struct regulator_init_data; */ struct fixed_voltage_config { const char *supply_name; + const char *input_supply; int microvolts; int gpio; unsigned startup_delay; @@ -58,14 +60,17 @@ struct fixed_voltage_config { struct regulator_consumer_supply; #if IS_ENABLED(CONFIG_REGULATOR) -struct platform_device *regulator_register_fixed(int id, - struct regulator_consumer_supply *supplies, int num_supplies); +struct platform_device *regulator_register_always_on(int id, const char *name, + struct regulator_consumer_supply *supplies, int num_supplies, int uv); #else -static inline struct platform_device *regulator_register_fixed(int id, - struct regulator_consumer_supply *supplies, int num_supplies) +static inline struct platform_device *regulator_register_always_on(int id, const char *name, + struct regulator_consumer_supply *supplies, int num_supplies, int uv) { return NULL; } #endif +#define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \ + "fixed-dummy", s, ns, 0) + #endif diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h new file mode 100644 index 00000000000..132e05c4666 --- /dev/null +++ b/include/linux/regulator/lp872x.h @@ -0,0 +1,90 @@ +/* + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LP872X_REGULATOR_H__ +#define __LP872X_REGULATOR_H__ + +#include <linux/regulator/machine.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#define LP872X_MAX_REGULATORS 9 + +enum lp872x_regulator_id { + LP8720_ID_BASE, + LP8720_ID_LDO1 = LP8720_ID_BASE, + LP8720_ID_LDO2, + LP8720_ID_LDO3, + LP8720_ID_LDO4, + LP8720_ID_LDO5, + LP8720_ID_BUCK, + + LP8725_ID_BASE, + LP8725_ID_LDO1 = LP8725_ID_BASE, + LP8725_ID_LDO2, + LP8725_ID_LDO3, + LP8725_ID_LDO4, + LP8725_ID_LDO5, + LP8725_ID_LILO1, + LP8725_ID_LILO2, + LP8725_ID_BUCK1, + LP8725_ID_BUCK2, + + LP872X_ID_MAX, +}; + +enum lp872x_dvs_state { + DVS_LOW = GPIOF_OUT_INIT_LOW, + DVS_HIGH = GPIOF_OUT_INIT_HIGH, +}; + +enum lp872x_dvs_sel { + SEL_V1, + SEL_V2, +}; + +/** + * lp872x_dvs + * @gpio : gpio pin number for dvs control + * @vsel : dvs selector for buck v1 or buck v2 register + * @init_state : initial dvs pin state + */ +struct lp872x_dvs { + int gpio; + enum lp872x_dvs_sel vsel; + enum lp872x_dvs_state init_state; +}; + +/** + * lp872x_regdata + * @id : regulator id + * @init_data : init data for each regulator + */ +struct lp872x_regulator_data { + enum lp872x_regulator_id id; + struct regulator_init_data *init_data; +}; + +/** + * lp872x_platform_data + * @general_config : the value of LP872X_GENERAL_CFG register + * @update_config : if LP872X_GENERAL_CFG register is updated, set true + * @regulator_data : platform regulator id and init data + * @dvs : dvs data for buck voltage control + */ +struct lp872x_platform_data { + u8 general_config; + bool update_config; + struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; + struct lp872x_dvs *dvs; +}; + +#endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b02108446be..40dd0a394cf 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,6 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) */ struct regulation_constraints { @@ -125,6 +126,8 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; + unsigned int ramp_delay; + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2c1de8982c8..db71c4ad862 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -612,12 +612,6 @@ struct tcamsg { #include <linux/mutex.h> #include <linux/netdevice.h> -static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str) -{ - int len = strlen(str) + 1; - return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len); -} - extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo); extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid); extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, @@ -625,124 +619,7 @@ extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, extern void rtnl_set_sk_err(struct net *net, u32 group, int error); extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics); extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, - u32 id, u32 ts, u32 tsage, long expires, - u32 error); - -extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data); - -#define RTA_PUT(skb, attrtype, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_fill(skb, attrtype, attrlen, data); }) - -#define RTA_APPEND(skb, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \ - goto rtattr_failure; \ - memcpy(skb_put(skb, attrlen), data, attrlen); }) - -#define RTA_PUT_NOHDR(skb, attrlen, data) \ -({ RTA_APPEND(skb, RTA_ALIGN(attrlen), data); \ - memset(skb_tail_pointer(skb) - (RTA_ALIGN(attrlen) - attrlen), 0, \ - RTA_ALIGN(attrlen) - attrlen); }) - -#define RTA_PUT_U8(skb, attrtype, value) \ -({ u8 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u8), &_tmp); }) - -#define RTA_PUT_U16(skb, attrtype, value) \ -({ u16 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u16), &_tmp); }) - -#define RTA_PUT_U32(skb, attrtype, value) \ -({ u32 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u32), &_tmp); }) - -#define RTA_PUT_U64(skb, attrtype, value) \ -({ u64 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u64), &_tmp); }) - -#define RTA_PUT_SECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, (value) / HZ) - -#define RTA_PUT_MSECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, jiffies_to_msecs(value)) - -#define RTA_PUT_STRING(skb, attrtype, value) \ - RTA_PUT(skb, attrtype, strlen(value) + 1, value) - -#define RTA_PUT_FLAG(skb, attrtype) \ - RTA_PUT(skb, attrtype, 0, NULL); - -#define RTA_NEST(skb, type) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, 0, NULL); \ - __start; }) - -#define RTA_NEST_END(skb, start) \ -({ (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - (skb)->len; }) - -#define RTA_NEST_COMPAT(skb, type, attrlen, data) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, attrlen, data); \ - RTA_NEST(skb, type); \ - __start; }) - -#define RTA_NEST_COMPAT_END(skb, start) \ -({ struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \ - (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - RTA_NEST_END(skb, __nest); \ - (skb)->len; }) - -#define RTA_NEST_CANCEL(skb, start) \ -({ if (start) \ - skb_trim(skb, (unsigned char *) (start) - (skb)->data); \ - -1; }) - -#define RTA_GET_U8(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u8)) \ - goto rtattr_failure; \ - *(u8 *) RTA_DATA(rta); }) - -#define RTA_GET_U16(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u16)) \ - goto rtattr_failure; \ - *(u16 *) RTA_DATA(rta); }) - -#define RTA_GET_U32(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u32)) \ - goto rtattr_failure; \ - *(u32 *) RTA_DATA(rta); }) - -#define RTA_GET_U64(rta) \ -({ u64 _tmp; \ - if (!rta || RTA_PAYLOAD(rta) < sizeof(u64)) \ - goto rtattr_failure; \ - memcpy(&_tmp, RTA_DATA(rta), sizeof(_tmp)); \ - _tmp; }) - -#define RTA_GET_FLAG(rta) (!!(rta)) - -#define RTA_GET_SECS(rta) ((unsigned long) RTA_GET_U64(rta) * HZ) -#define RTA_GET_MSECS(rta) (msecs_to_jiffies((unsigned long) RTA_GET_U64(rta))) - -static inline struct rtattr * -__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen) -{ - struct rtattr *rta; - int size = RTA_LENGTH(attrlen); - - rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size)); - rta->rta_type = attrtype; - rta->rta_len = size; - memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size); - return rta; -} - -#define __RTA_PUT(skb, attrtype, attrlen) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_reserve(skb, attrtype, attrlen); }) + u32 id, long expires, u32 error); extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change); @@ -794,13 +671,6 @@ extern void __rtnl_unlock(void); } \ } while(0) -static inline u32 rtm_get_table(struct rtattr **rta, u8 table) -{ - return RTA_GET_U32(rta[RTA_TABLE-1]); -rtattr_failure: - return table; -} - extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, diff --git a/include/linux/sched.h b/include/linux/sched.h index 4a1f493e0fe..a721cef7e2d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -949,6 +949,7 @@ struct sched_domain { unsigned int smt_gain; int flags; /* See SD_* */ int level; + int idle_buddy; /* cpu assigned to select_idle_sibling() */ /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ @@ -1244,6 +1245,9 @@ struct task_struct { const struct sched_class *sched_class; struct sched_entity se; struct sched_rt_entity rt; +#ifdef CONFIG_CGROUP_SCHED + struct task_group *sched_task_group; +#endif #ifdef CONFIG_PREEMPT_NOTIFIERS /* list of struct preempt_notifier: */ @@ -1405,7 +1409,7 @@ struct task_struct { int (*notifier)(void *priv); void *notifier_data; sigset_t *notifier_mask; - struct hlist_head task_works; + struct callback_head *task_works; struct audit_context *audit_context; #ifdef CONFIG_AUDITSYSCALL @@ -1546,7 +1550,6 @@ struct task_struct { unsigned long timer_slack_ns; unsigned long default_timer_slack_ns; - struct list_head *scm_work_list; #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* Index of current stored address in ret_stack */ int curr_ret_stack; @@ -1581,7 +1584,6 @@ struct task_struct { #endif #ifdef CONFIG_UPROBES struct uprobe_task *utask; - int uprobe_srcu_id; #endif }; @@ -2723,7 +2725,7 @@ extern int sched_group_set_rt_period(struct task_group *tg, extern long sched_group_rt_period(struct task_group *tg); extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk); #endif -#endif +#endif /* CONFIG_CGROUP_SCHED */ extern int task_can_switch_user(struct user_struct *up, struct task_struct *tsk); diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index fc61854f622..83c44eefe69 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -86,6 +86,7 @@ int seq_puts(struct seq_file *m, const char *s); int seq_write(struct seq_file *seq, const void *data, size_t len); __printf(2, 3) int seq_printf(struct seq_file *, const char *, ...); +__printf(2, 0) int seq_vprintf(struct seq_file *, const char *, va_list args); int seq_path(struct seq_file *, const struct path *, const char *); int seq_dentry(struct seq_file *, struct dentry *, const char *); diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h index c4a5a8cd446..631af63af42 100644 --- a/include/linux/sfi_acpi.h +++ b/include/linux/sfi_acpi.h @@ -66,7 +66,7 @@ extern int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id, int (*handler)(struct acpi_table_header *)); -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { if (!acpi_table_parse(signature, handler)) @@ -83,7 +83,7 @@ static inline int sfi_acpi_table_parse(char *signature, char *oem_id, return -1; } -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { return acpi_table_parse(signature, handler); diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index c513b73cd7c..50910913b26 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -18,7 +18,6 @@ struct clk_mapping { struct kref ref; }; - struct sh_clk_ops { #ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); @@ -31,6 +30,10 @@ struct sh_clk_ops { long (*round_rate)(struct clk *clk, unsigned long rate); }; +#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1) +#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4) +#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6) + struct clk { struct list_head node; struct clk *parent; @@ -52,6 +55,7 @@ struct clk { unsigned int enable_bit; void __iomem *mapped_reg; + unsigned int div_mask; unsigned long arch_flags; void *priv; struct clk_mapping *mapping; @@ -65,6 +69,8 @@ struct clk { #define CLK_ENABLE_REG_16BIT BIT(2) #define CLK_ENABLE_REG_8BIT BIT(3) +#define CLK_MASK_DIV_ON_DISABLE BIT(4) + #define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \ CLK_ENABLE_REG_16BIT | \ CLK_ENABLE_REG_8BIT) @@ -146,14 +152,17 @@ static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr) .enable_reg = (void __iomem *)_reg, \ .enable_bit = _shift, \ .arch_flags = _div_bitmap, \ + .div_mask = SH_CLK_DIV4_MSK, \ .flags = _flags, \ } -struct clk_div4_table { +struct clk_div_table { struct clk_div_mult_table *div_mult_table; void (*kick)(struct clk *clk); }; +#define clk_div4_table clk_div_table + int sh_clk_div4_register(struct clk *clks, int nr, struct clk_div4_table *table); int sh_clk_div4_enable_register(struct clk *clks, int nr, @@ -165,7 +174,9 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, _num_parents, _src_shift, _src_width) \ { \ .enable_reg = (void __iomem *)_reg, \ - .flags = _flags, \ + .enable_bit = 0, /* unused */ \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ + .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ .parent_num = _num_parents, \ .src_shift = _src_shift, \ @@ -176,7 +187,9 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .parent = _parent, \ .enable_reg = (void __iomem *)_reg, \ - .flags = _flags, \ + .enable_bit = 0, /* unused */ \ + .div_mask = SH_CLK_DIV6_MSK, \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ } int sh_clk_div6_register(struct clk *clks, int nr); diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 425450b980b..b64d6bec6f9 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -10,38 +10,27 @@ #ifndef SH_DMA_H #define SH_DMA_H -#include <linux/list.h> #include <linux/dmaengine.h> +#include <linux/list.h> +#include <linux/shdma-base.h> +#include <linux/types.h> + +struct device; /* Used by slave DMA clients to request DMA to/from a specific peripheral */ struct sh_dmae_slave { - unsigned int slave_id; /* Set by the platform */ - struct device *dma_dev; /* Set by the platform */ - const struct sh_dmae_slave_config *config; /* Set by the driver */ -}; - -struct sh_dmae_regs { - u32 sar; /* SAR / source address */ - u32 dar; /* DAR / destination address */ - u32 tcr; /* TCR / transfer count */ -}; - -struct sh_desc { - struct sh_dmae_regs hw; - struct list_head node; - struct dma_async_tx_descriptor async_tx; - enum dma_transfer_direction direction; - dma_cookie_t cookie; - size_t partial; - int chunks; - int mark; + struct shdma_slave shdma_slave; /* Set by the platform */ }; +/* + * Supplied by platforms to specify, how a DMA channel has to be configured for + * a certain peripheral + */ struct sh_dmae_slave_config { - unsigned int slave_id; - dma_addr_t addr; - u32 chcr; - char mid_rid; + int slave_id; + dma_addr_t addr; + u32 chcr; + char mid_rid; }; struct sh_dmae_channel { @@ -110,4 +99,6 @@ struct sh_dmae_pdata { #define CHCR_TE 0x00000002 #define CHCR_IE 0x00000004 +bool shdma_chan_filter(struct dma_chan *chan, void *arg); + #endif diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h index 5c15aed9c4b..c19a0925829 100644 --- a/include/linux/sh_pfc.h +++ b/include/linux/sh_pfc.h @@ -11,22 +11,24 @@ #ifndef __SH_PFC_H #define __SH_PFC_H +#include <linux/stringify.h> #include <asm-generic/gpio.h> typedef unsigned short pinmux_enum_t; typedef unsigned short pinmux_flag_t; -#define PINMUX_TYPE_NONE 0 -#define PINMUX_TYPE_FUNCTION 1 -#define PINMUX_TYPE_GPIO 2 -#define PINMUX_TYPE_OUTPUT 3 -#define PINMUX_TYPE_INPUT 4 -#define PINMUX_TYPE_INPUT_PULLUP 5 -#define PINMUX_TYPE_INPUT_PULLDOWN 6 +enum { + PINMUX_TYPE_NONE, -#define PINMUX_FLAG_TYPE (0x7) -#define PINMUX_FLAG_WANT_PULLUP (1 << 3) -#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4) + PINMUX_TYPE_FUNCTION, + PINMUX_TYPE_GPIO, + PINMUX_TYPE_OUTPUT, + PINMUX_TYPE_INPUT, + PINMUX_TYPE_INPUT_PULLUP, + PINMUX_TYPE_INPUT_PULLDOWN, + + PINMUX_FLAG_TYPE, /* must be last */ +}; #define PINMUX_FLAG_DBIT_SHIFT 5 #define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) @@ -36,9 +38,12 @@ typedef unsigned short pinmux_flag_t; struct pinmux_gpio { pinmux_enum_t enum_id; pinmux_flag_t flags; + const char *name; }; -#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark } +#define PINMUX_GPIO(gpio, data_or_mark) \ + [gpio] = { .name = __stringify(gpio), .enum_id = data_or_mark, .flags = PINMUX_TYPE_NONE } + #define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0 struct pinmux_cfg_reg { @@ -89,7 +94,7 @@ struct pfc_window { unsigned long size; }; -struct pinmux_info { +struct sh_pfc { char *name; pinmux_enum_t reserved_id; struct pinmux_range data; @@ -112,17 +117,45 @@ struct pinmux_info { struct pinmux_irq *gpio_irq; unsigned int gpio_irq_size; + spinlock_t lock; + struct resource *resource; unsigned int num_resources; struct pfc_window *window; unsigned long unlock_reg; - - struct gpio_chip chip; }; -int register_pinmux(struct pinmux_info *pip); -int unregister_pinmux(struct pinmux_info *pip); +/* XXX compat for now */ +#define pinmux_info sh_pfc + +/* drivers/sh/pfc/gpio.c */ +int sh_pfc_register_gpiochip(struct sh_pfc *pfc); + +/* drivers/sh/pfc/pinctrl.c */ +int sh_pfc_register_pinctrl(struct sh_pfc *pfc); + +/* drivers/sh/pfc/core.c */ +int register_sh_pfc(struct sh_pfc *pfc); + +int sh_pfc_read_bit(struct pinmux_data_reg *dr, unsigned long in_pos); +void sh_pfc_write_bit(struct pinmux_data_reg *dr, unsigned long in_pos, + unsigned long value); +int sh_pfc_get_data_reg(struct sh_pfc *pfc, unsigned gpio, + struct pinmux_data_reg **drp, int *bitp); +int sh_pfc_gpio_to_enum(struct sh_pfc *pfc, unsigned gpio, int pos, + pinmux_enum_t *enum_idp); +int sh_pfc_config_gpio(struct sh_pfc *pfc, unsigned gpio, int pinmux_type, + int cfg_mode); + +/* xxx */ +static inline int register_pinmux(struct pinmux_info *pip) +{ + struct sh_pfc *pfc = pip; + return register_sh_pfc(pfc); +} + +enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE }; /* helper macro for port */ #define PORT_1(fn, pfx, sfx) fn(pfx, sfx) diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h new file mode 100644 index 00000000000..93f9821554b --- /dev/null +++ b/include/linux/shdma-base.h @@ -0,0 +1,124 @@ +/* + * Dmaengine driver base library for DMA controllers, found on SH-based SoCs + * + * extracted from shdma.c and headers + * + * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved. + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#ifndef SHDMA_BASE_H +#define SHDMA_BASE_H + +#include <linux/dmaengine.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/types.h> + +/** + * shdma_pm_state - DMA channel PM state + * SHDMA_PM_ESTABLISHED: either idle or during data transfer + * SHDMA_PM_BUSY: during the transfer preparation, when we have to + * drop the lock temporarily + * SHDMA_PM_PENDING: transfers pending + */ +enum shdma_pm_state { + SHDMA_PM_ESTABLISHED, + SHDMA_PM_BUSY, + SHDMA_PM_PENDING, +}; + +struct device; + +/* + * Drivers, using this library are expected to embed struct shdma_dev, + * struct shdma_chan, struct shdma_desc, and struct shdma_slave + * in their respective device, channel, descriptor and slave objects. + */ + +struct shdma_slave { + int slave_id; +}; + +struct shdma_desc { + struct list_head node; + struct dma_async_tx_descriptor async_tx; + enum dma_transfer_direction direction; + dma_cookie_t cookie; + int chunks; + int mark; +}; + +struct shdma_chan { + spinlock_t chan_lock; /* Channel operation lock */ + struct list_head ld_queue; /* Link descriptors queue */ + struct list_head ld_free; /* Free link descriptors */ + struct dma_chan dma_chan; /* DMA channel */ + struct device *dev; /* Channel device */ + void *desc; /* buffer for descriptor array */ + int desc_num; /* desc count */ + size_t max_xfer_len; /* max transfer length */ + int id; /* Raw id of this channel */ + int irq; /* Channel IRQ */ + int slave_id; /* Client ID for slave DMA */ + enum shdma_pm_state pm_state; +}; + +/** + * struct shdma_ops - simple DMA driver operations + * desc_completed: return true, if this is the descriptor, that just has + * completed (atomic) + * halt_channel: stop DMA channel operation (atomic) + * channel_busy: return true, if the channel is busy (atomic) + * slave_addr: return slave DMA address + * desc_setup: set up the hardware specific descriptor portion (atomic) + * set_slave: bind channel to a slave + * setup_xfer: configure channel hardware for operation (atomic) + * start_xfer: start the DMA transfer (atomic) + * embedded_desc: return Nth struct shdma_desc pointer from the + * descriptor array + * chan_irq: process channel IRQ, return true if a transfer has + * completed (atomic) + */ +struct shdma_ops { + bool (*desc_completed)(struct shdma_chan *, struct shdma_desc *); + void (*halt_channel)(struct shdma_chan *); + bool (*channel_busy)(struct shdma_chan *); + dma_addr_t (*slave_addr)(struct shdma_chan *); + int (*desc_setup)(struct shdma_chan *, struct shdma_desc *, + dma_addr_t, dma_addr_t, size_t *); + int (*set_slave)(struct shdma_chan *, int, bool); + void (*setup_xfer)(struct shdma_chan *, int); + void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); + struct shdma_desc *(*embedded_desc)(void *, int); + bool (*chan_irq)(struct shdma_chan *, int); +}; + +struct shdma_dev { + struct dma_device dma_dev; + struct shdma_chan **schan; + const struct shdma_ops *ops; + size_t desc_size; +}; + +#define shdma_for_each_chan(c, d, i) for (i = 0, c = (d)->schan[0]; \ + i < (d)->dma_dev.chancnt; c = (d)->schan[++i]) + +int shdma_request_irq(struct shdma_chan *, int, + unsigned long, const char *); +void shdma_free_irq(struct shdma_chan *); +bool shdma_reset(struct shdma_dev *sdev); +void shdma_chan_probe(struct shdma_dev *sdev, + struct shdma_chan *schan, int id); +void shdma_chan_remove(struct shdma_chan *schan); +int shdma_init(struct device *dev, struct shdma_dev *sdev, + int chan_num); +void shdma_cleanup(struct shdma_dev *sdev); + +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 642cb7355df..d205c4be7f5 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1667,6 +1667,22 @@ static inline void skb_orphan(struct sk_buff *skb) } /** + * skb_orphan_frags - orphan the frags contained in a buffer + * @skb: buffer to orphan frags from + * @gfp_mask: allocation mask for replacement pages + * + * For each frag in the SKB which needs a destructor (i.e. has an + * owner) create a copy of that frag and release the original + * page by calling the destructor. + */ +static inline int skb_orphan_frags(struct sk_buff *skb, gfp_t gfp_mask) +{ + if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY))) + return 0; + return skb_copy_ubufs(skb, gfp_mask); +} + +/** * __skb_queue_purge - empty a list * @list: list to empty * diff --git a/include/linux/smp.h b/include/linux/smp.h index 717fb746c9a..dd6f06be3c9 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -90,10 +90,6 @@ void kick_all_cpus_sync(void); void __init call_function_init(void); void generic_smp_call_function_single_interrupt(void); void generic_smp_call_function_interrupt(void); -void ipi_call_lock(void); -void ipi_call_unlock(void); -void ipi_call_lock_irq(void); -void ipi_call_unlock_irq(void); #else static inline void call_function_init(void) { } #endif @@ -181,7 +177,6 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } while (0) static inline void smp_send_reschedule(int cpu) { } -#define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) #define smp_call_function_many(mask, func, info, wait) \ (up_smp_call_function(func, info)) diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 2e68f5ba038..00bc189cb39 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -208,7 +208,6 @@ enum LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */ LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */ - LINUX_MIB_TCPABORTONSYN, /* TCPAbortOnSyn */ LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */ LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */ LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */ @@ -233,7 +232,13 @@ enum LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ - LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ + LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ + LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ + LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ + LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ + LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ __LINUX_MIB_MAX }; diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index db4bae78bda..e3e395acc2f 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -18,6 +18,7 @@ enum { SK_MEMINFO_FWD_ALLOC, SK_MEMINFO_WMEM_QUEUED, SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, SK_MEMINFO_VARS, }; @@ -43,6 +44,5 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); -extern struct sock *sock_diag_nlsk; #endif /* KERNEL */ #endif diff --git a/include/linux/socket.h b/include/linux/socket.h index 25d6322fb63..ba7b2e817cf 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -268,6 +268,7 @@ struct ucred { #define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */ #define MSG_EOF MSG_FIN +#define MSG_FASTOPEN 0x20000000 /* Send data in TCP SYN */ #define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exit for file descriptor received through SCM_RIGHTS */ diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 6334cee1a3b..58368be0b4c 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -12,6 +12,8 @@ struct ad7879_platform_data { u16 y_min, y_max; u16 pressure_min, pressure_max; + bool swap_xy; /* swap x and y axes */ + /* [0..255] 0=OFF Starts at 1=550us and goes * all the way to 9.440ms in steps of 35us. */ diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h new file mode 100644 index 00000000000..b2b1afbb320 --- /dev/null +++ b/include/linux/spi/at86rf230.h @@ -0,0 +1,31 @@ +/* + * AT86RF230/RF231 driver + * + * Copyright (C) 2009-2012 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com> + */ +#ifndef AT86RF230_H +#define AT86RF230_H + +struct at86rf230_platform_data { + int rstn; + int slp_tr; + int dig2; +}; + +#endif diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bc14bd738ad..bb674c02f30 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -243,6 +243,7 @@ struct ssb_bus_ops { #define SSB_DEV_MINI_MACPHY 0x823 #define SSB_DEV_ARM_1176 0x824 #define SSB_DEV_ARM_7TDMI 0x825 +#define SSB_DEV_ARM_CM3 0x82A /* Vendor-ID values */ #define SSB_VENDOR_BROADCOM 0x4243 diff --git a/include/linux/suspend.h b/include/linux/suspend.h index cd83059fb59..0c808d7fa57 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -408,6 +408,12 @@ static inline void unlock_system_sleep(void) {} #endif /* !CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_SLEEP_DEBUG +extern bool pm_print_times_enabled; +#else +#define pm_print_times_enabled (false) +#endif + #ifdef CONFIG_PM_AUTOSLEEP /* kernel/power/autosleep.c */ diff --git a/include/linux/task_work.h b/include/linux/task_work.h index 294d5d5e90b..fb46b03b185 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -4,29 +4,21 @@ #include <linux/list.h> #include <linux/sched.h> -struct task_work; -typedef void (*task_work_func_t)(struct task_work *); - -struct task_work { - struct hlist_node hlist; - task_work_func_t func; - void *data; -}; +typedef void (*task_work_func_t)(struct callback_head *); static inline void -init_task_work(struct task_work *twork, task_work_func_t func, void *data) +init_task_work(struct callback_head *twork, task_work_func_t func) { twork->func = func; - twork->data = data; } -int task_work_add(struct task_struct *task, struct task_work *twork, bool); -struct task_work *task_work_cancel(struct task_struct *, task_work_func_t); +int task_work_add(struct task_struct *task, struct callback_head *twork, bool); +struct callback_head *task_work_cancel(struct task_struct *, task_work_func_t); void task_work_run(void); static inline void exit_task_work(struct task_struct *task) { - if (unlikely(!hlist_empty(&task->task_works))) + if (unlikely(task->task_works)) task_work_run(); } diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 5f359dbfcdc..eb125a4c30b 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -243,6 +243,16 @@ static inline unsigned int tcp_optlen(const struct sk_buff *skb) return (tcp_hdr(skb)->doff - 5) * 4; } +/* TCP Fast Open */ +#define TCP_FASTOPEN_COOKIE_MIN 4 /* Min Fast Open Cookie size in bytes */ +#define TCP_FASTOPEN_COOKIE_MAX 16 /* Max Fast Open Cookie size in bytes */ + +/* TCP Fast Open Cookie as stored in memory */ +struct tcp_fastopen_cookie { + s8 len; + u8 val[TCP_FASTOPEN_COOKIE_MAX]; +}; + /* This defines a selective acknowledgement block. */ struct tcp_sack_block_wire { __be32 start_seq; @@ -339,6 +349,9 @@ struct tcp_sock { u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ u32 lsndtime; /* timestamp of last sent data packet (for restart window) */ + struct list_head tsq_node; /* anchor in tsq_tasklet.head list */ + unsigned long tsq_flags; + /* Data for direct copy to user */ struct { struct sk_buff_head prequeue; @@ -373,7 +386,9 @@ struct tcp_sock { unused : 1; u8 repair_queue; u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ - early_retrans_delayed:1; /* Delayed ER timer installed */ + early_retrans_delayed:1, /* Delayed ER timer installed */ + syn_data:1, /* SYN includes data */ + syn_fastopen:1; /* SYN includes Fast Open option */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ @@ -478,6 +493,9 @@ struct tcp_sock { u32 probe_seq_start; u32 probe_seq_end; } mtu_probe; + u32 mtu_info; /* We received an ICMP_FRAG_NEEDED / ICMPV6_PKT_TOOBIG + * while socket was owned by user. + */ #ifdef CONFIG_TCP_MD5SIG /* TCP AF-Specific parts; only used by MD5 Signature support so far */ @@ -487,6 +505,9 @@ struct tcp_sock { struct tcp_md5sig_info __rcu *md5sig_info; #endif +/* TCP fastopen related information */ + struct tcp_fastopen_request *fastopen_req; + /* When the cookie options are generated and exchanged, then this * object holds a reference to them (cookie_values->kref). Also * contains related tcp_cookie_transactions fields. @@ -494,6 +515,17 @@ struct tcp_sock { struct tcp_cookie_values *cookie_values; }; +enum tsq_flags { + TSQ_THROTTLED, + TSQ_QUEUED, + TCP_TSQ_DEFERRED, /* tcp_tasklet_func() found socket was owned */ + TCP_WRITE_TIMER_DEFERRED, /* tcp_write_timer() found socket was owned */ + TCP_DELACK_TIMER_DEFERRED, /* tcp_delack_timer() found socket was owned */ + TCP_MTU_REDUCED_DEFERRED, /* tcp_v{4|6}_err() could not call + * tcp_v{4|6}_mtu_reduced() + */ +}; + static inline struct tcp_sock *tcp_sk(const struct sock *sk) { return (struct tcp_sock *)sk; @@ -507,7 +539,7 @@ struct tcp_timewait_sock { u32 tw_ts_recent; long tw_ts_recent_stamp; #ifdef CONFIG_TCP_MD5SIG - struct tcp_md5sig_key *tw_md5_key; + struct tcp_md5sig_key *tw_md5_key; #endif /* Few sockets in timewait have cookies; in that case, then this * object holds a reference to them (tw_cookie_values->kref). diff --git a/include/linux/tick.h b/include/linux/tick.h index ab8be90b5cc..f37fceb69b7 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -31,10 +31,10 @@ enum tick_nohz_mode { * struct tick_sched - sched tick emulation and no idle tick control/stats * @sched_timer: hrtimer to schedule the periodic tick in high * resolution mode - * @idle_tick: Store the last idle tick expiry time when the tick - * timer is modified for idle sleeps. This is necessary + * @last_tick: Store the last tick expiry time when the tick + * timer is modified for nohz sleeps. This is necessary * to resume the tick timer operation in the timeline - * when the CPU returns from idle + * when the CPU returns from nohz sleep. * @tick_stopped: Indicator that the idle tick has been stopped * @idle_jiffies: jiffies at the entry to idle for idle time accounting * @idle_calls: Total number of idle calls @@ -51,7 +51,7 @@ struct tick_sched { struct hrtimer sched_timer; unsigned long check_clocks; enum tick_nohz_mode nohz_mode; - ktime_t idle_tick; + ktime_t last_tick; int inidle; int tick_stopped; unsigned long idle_jiffies; diff --git a/include/linux/time-armada-370-xp.h b/include/linux/time-armada-370-xp.h new file mode 100644 index 00000000000..dfdfdc03115 --- /dev/null +++ b/include/linux/time-armada-370-xp.h @@ -0,0 +1,18 @@ +/* + * Marvell Armada 370/XP SoC timer handling. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + */ +#ifndef __TIME_ARMADA_370_XPPRCMU_H +#define __TIME_ARMADA_370_XPPRCMU_H + +#include <linux/init.h> + +void __init armada_370_xp_timer_init(void); + +#endif diff --git a/include/linux/time.h b/include/linux/time.h index 179f4d6755f..c81c5e40fcb 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -257,14 +257,6 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) #endif /* __KERNEL__ */ -#define NFDBITS __NFDBITS - -#define FD_SETSIZE __FD_SETSIZE -#define FD_SET(fd,fdsetp) __FD_SET(fd,fdsetp) -#define FD_CLR(fd,fdsetp) __FD_CLR(fd,fdsetp) -#define FD_ISSET(fd,fdsetp) __FD_ISSET(fd,fdsetp) -#define FD_ZERO(fdsetp) __FD_ZERO(fdsetp) - /* * Names of the interval timers, and structure * defining a timer setting: diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 9730b0e51e4..c9892842010 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -102,8 +102,8 @@ #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ -#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ +#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ +#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ /* diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 6a4d82bedb0..1e98b553042 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -192,7 +192,7 @@ static inline void tracehook_notify_resume(struct pt_regs *regs) * hlist_add_head(task->task_works); */ smp_mb__after_clear_bit(); - if (unlikely(!hlist_empty(¤t->task_works))) + if (unlikely(current->task_works)) task_work_run(); } diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index bd96ecd0e05..802de56c41e 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -153,7 +153,7 @@ static inline void tracepoint_synchronize_unregister(void) } \ static inline void trace_##name##_rcuidle(proto) \ { \ - if (static_branch(&__tracepoint_##name.key)) \ + if (static_key_false(&__tracepoint_##name.key)) \ __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ diff --git a/include/linux/types.h b/include/linux/types.h index 9c1bd539ea7..bf0dd7524b2 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -246,14 +246,15 @@ struct ustat { }; /** - * struct rcu_head - callback structure for use with RCU + * struct callback_head - callback structure for use with RCU and task_work * @next: next update requests in a list * @func: actual update function to call after the grace period. */ -struct rcu_head { - struct rcu_head *next; - void (*func)(struct rcu_head *head); +struct callback_head { + struct callback_head *next; + void (*func)(struct callback_head *head); }; +#define rcu_head callback_head #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/linux/uhid.h b/include/linux/uhid.h new file mode 100644 index 00000000000..9c6974f1696 --- /dev/null +++ b/include/linux/uhid.h @@ -0,0 +1,104 @@ +#ifndef __UHID_H_ +#define __UHID_H_ + +/* + * User-space I/O driver support for HID subsystem + * Copyright (c) 2012 David Herrmann + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* + * Public header for user-space communication. We try to keep every structure + * aligned but to be safe we also use __attribute__((__packed__)). Therefore, + * the communication should be ABI compatible even between architectures. + */ + +#include <linux/input.h> +#include <linux/types.h> + +enum uhid_event_type { + UHID_CREATE, + UHID_DESTROY, + UHID_START, + UHID_STOP, + UHID_OPEN, + UHID_CLOSE, + UHID_OUTPUT, + UHID_OUTPUT_EV, + UHID_INPUT, + UHID_FEATURE, + UHID_FEATURE_ANSWER, +}; + +struct uhid_create_req { + __u8 name[128]; + __u8 phys[64]; + __u8 uniq[64]; + __u8 __user *rd_data; + __u16 rd_size; + + __u16 bus; + __u32 vendor; + __u32 product; + __u32 version; + __u32 country; +} __attribute__((__packed__)); + +#define UHID_DATA_MAX 4096 + +enum uhid_report_type { + UHID_FEATURE_REPORT, + UHID_OUTPUT_REPORT, + UHID_INPUT_REPORT, +}; + +struct uhid_input_req { + __u8 data[UHID_DATA_MAX]; + __u16 size; +} __attribute__((__packed__)); + +struct uhid_output_req { + __u8 data[UHID_DATA_MAX]; + __u16 size; + __u8 rtype; +} __attribute__((__packed__)); + +struct uhid_output_ev_req { + __u16 type; + __u16 code; + __s32 value; +} __attribute__((__packed__)); + +struct uhid_feature_req { + __u32 id; + __u8 rnum; + __u8 rtype; +} __attribute__((__packed__)); + +struct uhid_feature_answer_req { + __u32 id; + __u16 err; + __u16 size; + __u8 data[UHID_DATA_MAX]; +}; + +struct uhid_event { + __u32 type; + + union { + struct uhid_create_req create; + struct uhid_input_req input; + struct uhid_output_req output; + struct uhid_output_ev_req output_ev; + struct uhid_feature_req feature; + struct uhid_feature_answer_req feature_answer; + } u; +} __attribute__((__packed__)); + +#endif /* __UHID_H_ */ diff --git a/include/linux/usb.h b/include/linux/usb.h index dea39dc551d..30d1ae38eab 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -77,14 +77,15 @@ struct usb_host_endpoint { struct usb_host_interface { struct usb_interface_descriptor desc; + int extralen; + unsigned char *extra; /* Extra descriptors */ + /* array of desc.bNumEndpoint endpoints associated with this * interface setting. these will be in no particular order. */ struct usb_host_endpoint *endpoint; char *string; /* iInterface string, if present */ - unsigned char *extra; /* Extra descriptors */ - int extralen; }; enum usb_interface_condition { @@ -331,6 +332,11 @@ struct usb_bus { u8 otg_port; /* 0, or number of OTG/HNP port */ unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ + unsigned no_stop_on_short:1; /* + * Quirk: some controllers don't stop + * the ep queue on a short transfer + * with the URB_SHORT_NOT_OK flag set. + */ unsigned sg_tablesize; /* 0 or largest number of sg list entries */ int devnum_next; /* Next open device number in @@ -556,7 +562,6 @@ struct usb_device { struct usb3_lpm_parameters u1_params; struct usb3_lpm_parameters u2_params; unsigned lpm_disable_count; - unsigned hub_initiated_lpm_disable_count; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -629,6 +634,17 @@ extern void usb_enable_lpm(struct usb_device *udev); extern int usb_unlocked_disable_lpm(struct usb_device *udev); extern void usb_unlocked_enable_lpm(struct usb_device *udev); +extern int usb_disable_ltm(struct usb_device *udev); +extern void usb_enable_ltm(struct usb_device *udev); + +static inline bool usb_device_supports_ltm(struct usb_device *udev) +{ + if (udev->speed != USB_SPEED_SUPER || !udev->bos || !udev->bos->ss_cap) + return false; + return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT; +} + + /*-------------------------------------------------------------------------*/ /* for drivers using iso endpoints */ @@ -777,6 +793,22 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bInterfaceProtocol = (pr) /** + * USB_DEVICE_INTERFACE_NUMBER - describe a usb device with a specific interface number + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @num: bInterfaceNumber value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface number of devices. + */ +#define USB_DEVICE_INTERFACE_NUMBER(vend, prod, num) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_NUMBER, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceNumber = (num) + +/** * USB_DEVICE_INFO - macro used to describe a class of usb devices * @cl: bDeviceClass value * @sc: bDeviceSubClass value @@ -829,6 +861,27 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bInterfaceSubClass = (sc), \ .bInterfaceProtocol = (pr) +/** + * USB_VENDOR_AND_INTERFACE_INFO - describe a specific usb vendor with a class of usb interfaces + * @vend: the 16 bit USB Vendor ID + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific vendor with a specific class of interfaces. + * + * This is especially useful when explicitly matching devices that have + * vendor specific bDeviceClass values, but standards-compliant interfaces. + */ +#define USB_VENDOR_AND_INTERFACE_INFO(vend, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_VENDOR, \ + .idVendor = (vend), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + /* ----------------------------------------------------------------------- */ /* Stuff for dynamic usb ids */ diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index edb90d6cfd1..544825dde82 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -5,12 +5,15 @@ #ifndef __LINUX_USB_CHIPIDEA_H #define __LINUX_USB_CHIPIDEA_H +#include <linux/usb/otg.h> + struct ci13xxx; -struct ci13xxx_udc_driver { +struct ci13xxx_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; unsigned power_budget; + struct usb_phy *phy; unsigned long flags; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) @@ -19,10 +22,17 @@ struct ci13xxx_udc_driver { #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *udc, unsigned event); + void (*notify_event) (struct ci13xxx *ci, unsigned event); }; /* Default offset of capability registers */ #define DEF_CAPOFFSET 0x100 +/* Add ci13xxx device */ +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata); +/* Remove ci13xxx device */ +void ci13xxx_remove_device(struct platform_device *pdev); + #endif diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 7cc95ee3606..de4b9ed5d5d 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -111,7 +111,13 @@ struct ehci_regs { /* ASYNCLISTADDR: offset 0x18 */ u32 async_next; /* address of next async queue head */ - u32 reserved[9]; + u32 reserved1[2]; + + /* TXFILLTUNING: offset 0x24 */ + u32 txfill_tuning; /* TX FIFO Tuning register */ +#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + + u32 reserved2[6]; /* CONFIGFLAG: offset 0x40 */ u32 configured_flag; @@ -155,26 +161,34 @@ struct ehci_regs { #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -}; -#define USBMODE 0x68 /* USB Device mode */ + u32 reserved3[9]; + + /* USBMODE: offset 0x68 */ + u32 usbmode; /* USB Device mode */ #define USBMODE_SDIS (1<<3) /* Stream disable */ #define USBMODE_BE (1<<2) /* BE/LE endianness select */ #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ + u32 reserved4[7]; + /* Moorestown has some non-standard registers, partially due to the fact that * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ -#define HOSTPC0 0x84 /* HOSTPC extension */ + /* HOSTPC: offset 0x84 */ + u32 hostpc[0]; /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ -#define USBMODE_EX 0xc8 /* USB Device mode extension */ + + u32 reserved5[17]; + + /* USBMODE_EX: offset 0xc8 */ + u32 usbmode_ex; /* USB Device mode extension */ #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ #define USBMODE_EX_HC (3<<0) /* host controller mode */ -#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */ -#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ +}; /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 49b3ac29726..c5fdb148fc0 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -93,6 +93,12 @@ struct usb_hcd { */ const struct hc_driver *driver; /* hw-specific hooks */ + /* + * OTG and some Host controllers need software interaction with phys; + * other external phys should be software-transparent + */ + struct usb_phy *phy; + /* Flags that need to be manipulated atomically because they can * change while the host controller is running. Always use * set_bit() or clear_bit() to change their values. diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h new file mode 100644 index 00000000000..7774c5986f0 --- /dev/null +++ b/include/linux/usb/musb-omap.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2011-2012 by Texas Instruments + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + */ + +#ifndef __MUSB_OMAP_H__ +#define __MUSB_OMAP_H__ + +enum omap_musb_vbus_id_status { + OMAP_MUSB_UNKNOWN = 0, + OMAP_MUSB_ID_GROUND, + OMAP_MUSB_ID_FLOAT, + OMAP_MUSB_VBUS_VALID, + OMAP_MUSB_VBUS_OFF, +}; + +#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \ + defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)) +void omap_musb_mailbox(enum omap_musb_vbus_id_status status); +#else +static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status) +{ +} +#endif + +#endif /* __MUSB_OMAP_H__ */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 38ab3f46346..45824be0a2f 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -43,6 +43,13 @@ enum usb_phy_events { USB_EVENT_ENUMERATED, /* gadget driver enumerated */ }; +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + struct usb_phy; /* for transceivers connected thru an ULPI interface, the user must @@ -89,6 +96,7 @@ struct usb_phy { const char *label; unsigned int flags; + enum usb_phy_type type; enum usb_otg_state state; enum usb_phy_events last_event; @@ -105,6 +113,9 @@ struct usb_phy { u16 port_status; u16 port_change; + /* to support controllers that have multiple transceivers */ + struct list_head head; + /* initialize/shutdown the OTG controller */ int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); @@ -117,11 +128,15 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); }; /* for board-specific init logic */ -extern int usb_set_transceiver(struct usb_phy *); +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -172,16 +187,29 @@ usb_phy_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_transceiver(void); -extern void usb_put_transceiver(struct usb_phy *); +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); +extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_transceiver(void) +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + return NULL; +} + +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) { return NULL; } -static inline void usb_put_transceiver(struct usb_phy *x) +static inline void usb_put_phy(struct usb_phy *x) +{ +} + +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) { } @@ -252,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +static inline int otg_start_srp(struct usb_otg *otg) { if (otg && otg->start_srp) @@ -276,4 +322,15 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} #endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 547e59cc00e..c5d36c65c33 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -132,6 +132,14 @@ struct renesas_usbhs_driver_param { * option: * * dma id for dmaengine + * The data transfer direction on D0FIFO/D1FIFO should be + * fixed for keeping consistency. + * So, the platform id settings will be.. + * .d0_tx_id = xx_TX, + * .d1_rx_id = xx_RX, + * or + * .d1_tx_id = xx_TX, + * .d0_rx_id = xx_RX, */ int d0_tx_id; int d0_rx_id; diff --git a/include/linux/usb/tilegx.h b/include/linux/usb/tilegx.h new file mode 100644 index 00000000000..2d65e343568 --- /dev/null +++ b/include/linux/usb/tilegx.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Structure to contain platform-specific data related to Tile-Gx USB + * controllers. + */ + +#ifndef _LINUX_USB_TILEGX_H +#define _LINUX_USB_TILEGX_H + +#include <gxio/usb_host.h> + +struct tilegx_usb_platform_data { + /* GXIO device index. */ + int dev_index; + + /* GXIO device context. */ + gxio_usb_host_context_t usb_ctx; + + /* Device IRQ. */ + unsigned int irq; +}; + +#endif /* _LINUX_USB_TILEGX_H */ diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h index 9a988e41369..5499ab5c94b 100644 --- a/include/linux/usb/uas.h +++ b/include/linux/usb/uas.h @@ -20,6 +20,28 @@ enum { IU_ID_WRITE_READY = 0x07, }; +enum { + TMF_ABORT_TASK = 0x01, + TMF_ABORT_TASK_SET = 0x02, + TMF_CLEAR_TASK_SET = 0x04, + TMF_LOGICAL_UNIT_RESET = 0x08, + TMF_I_T_NEXUS_RESET = 0x10, + TMF_CLEAR_ACA = 0x40, + TMF_QUERY_TASK = 0x80, + TMF_QUERY_TASK_SET = 0x81, + TMF_QUERY_ASYNC_EVENT = 0x82, +}; + +enum { + RC_TMF_COMPLETE = 0x00, + RC_INVALID_INFO_UNIT = 0x02, + RC_TMF_NOT_SUPPORTED = 0x04, + RC_TMF_FAILED = 0x05, + RC_TMF_SUCCEEDED = 0x08, + RC_INCORRECT_LUN = 0x09, + RC_OVERLAPPED_TAG = 0x0a, +}; + struct command_iu { __u8 iu_id; __u8 rsvd1; @@ -32,6 +54,16 @@ struct command_iu { __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ }; +struct task_mgmt_iu { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __u8 function; + __u8 rsvd2; + __be16 task_tag; + struct scsi_lun lun; +}; + /* * Also used for the Read Ready and Write Ready IUs since they have the * same first four bytes @@ -47,6 +79,14 @@ struct sense_iu { __u8 sense[SCSI_SENSE_BUFFERSIZE]; }; +struct response_ui { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __be16 add_response_info; + __u8 response_code; +}; + struct usb_pipe_usage_descriptor { __u8 bLength; __u8 bDescriptorType; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 76f439647c4..f87cf622317 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -66,9 +66,8 @@ struct usbnet { # define EVENT_STS_SPLIT 3 # define EVENT_LINK_RESET 4 # define EVENT_RX_PAUSED 5 -# define EVENT_DEV_WAKING 6 -# define EVENT_DEV_ASLEEP 7 -# define EVENT_DEV_OPEN 8 +# define EVENT_DEV_ASLEEP 6 +# define EVENT_DEV_OPEN 7 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 17df3600bce..e84e769aadd 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -64,7 +64,9 @@ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ /* cannot handle READ_CAPACITY_16 */ \ US_FLAG(INITIAL_READ10, 0x00100000) \ - /* Initial READ(10) (and others) must be retried */ + /* Initial READ(10) (and others) must be retried */ \ + US_FLAG(WRITE_CACHE, 0x00200000) \ + /* Write Cache status is not available */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 15591d2ea40..3b74666be02 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -125,6 +125,12 @@ struct usbdevfs_hub_portinfo { char port [127]; /* e.g. port 3 connects to device 27 */ }; +/* Device capability flags */ +#define USBDEVFS_CAP_ZERO_PACKET 0x01 +#define USBDEVFS_CAP_BULK_CONTINUATION 0x02 +#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 +#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 + #ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -204,4 +210,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CONNECT _IO('U', 23) #define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) +#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) + #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 8efd28ae559..a1ba8bbd9fb 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -92,6 +92,7 @@ struct virtio_driver { const unsigned int *feature_table; unsigned int feature_table_size; int (*probe)(struct virtio_device *dev); + void (*scan)(struct virtio_device *dev); void (*remove)(struct virtio_device *dev); void (*config_changed)(struct virtio_device *dev); #ifdef CONFIG_PM diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h index 8ddeafdc054..dc8d305b0e0 100644 --- a/include/linux/virtio_scsi.h +++ b/include/linux/virtio_scsi.h @@ -69,6 +69,10 @@ struct virtio_scsi_config { u32 max_lun; } __packed; +/* Feature Bits */ +#define VIRTIO_SCSI_F_INOUT 0 +#define VIRTIO_SCSI_F_HOTPLUG 1 + /* Response codes */ #define VIRTIO_SCSI_S_OK 0 #define VIRTIO_SCSI_S_OVERRUN 1 @@ -105,6 +109,11 @@ struct virtio_scsi_config { #define VIRTIO_SCSI_T_TRANSPORT_RESET 1 #define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 +/* Reasons of transport reset event */ +#define VIRTIO_SCSI_EVT_RESET_HARD 0 +#define VIRTIO_SCSI_EVT_RESET_RESCAN 1 +#define VIRTIO_SCSI_EVT_RESET_REMOVED 2 + #define VIRTIO_SCSI_S_SIMPLE 0 #define VIRTIO_SCSI_S_ORDERED 1 #define VIRTIO_SCSI_S_HEAD 2 |