summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/dccp.h13
-rw-r--r--include/linux/ieee80211.h142
-rw-r--r--include/linux/if.h1
-rw-r--r--include/linux/kernel.h12
-rw-r--r--include/linux/netdevice.h33
-rw-r--r--include/linux/nl80211.h98
-rw-r--r--include/linux/rculist.h17
-rw-r--r--include/linux/skbuff.h19
-rw-r--r--include/linux/sunrpc/svc_xprt.h8
-rw-r--r--include/linux/xfrm.h14
10 files changed, 279 insertions, 78 deletions
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index 6080449fbec..484b8a1fb02 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -176,19 +176,20 @@ enum {
};
/* DCCP features (RFC 4340 section 6.4) */
-enum {
+enum dccp_feature_numbers {
DCCPF_RESERVED = 0,
DCCPF_CCID = 1,
- DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */
+ DCCPF_SHORT_SEQNOS = 2,
DCCPF_SEQUENCE_WINDOW = 3,
- DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */
+ DCCPF_ECN_INCAPABLE = 4,
DCCPF_ACK_RATIO = 5,
DCCPF_SEND_ACK_VECTOR = 6,
DCCPF_SEND_NDP_COUNT = 7,
DCCPF_MIN_CSUM_COVER = 8,
- DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */
+ DCCPF_DATA_CHECKSUM = 9,
/* 10-127 reserved */
DCCPF_MIN_CCID_SPECIFIC = 128,
+ DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */
DCCPF_MAX_CCID_SPECIFIC = 255,
};
@@ -411,6 +412,7 @@ extern void dccp_minisock_init(struct dccp_minisock *dmsk);
* @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1)
* @dreq_isr: initial sequence number received on the Request
* @dreq_service: service code present on the Request (there is just one)
+ * @dreq_featneg: feature negotiation options for this connection
* The following two fields are analogous to the ones in dccp_sock:
* @dreq_timestamp_echo: last received timestamp to echo (13.1)
* @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo
@@ -420,6 +422,7 @@ struct dccp_request_sock {
__u64 dreq_iss;
__u64 dreq_isr;
__be32 dreq_service;
+ struct list_head dreq_featneg;
__u32 dreq_timestamp_echo;
__u32 dreq_timestamp_time;
};
@@ -497,6 +500,7 @@ struct dccp_ackvec;
* @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
* @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
* @dccps_minisock - associated minisock (accessed via dccp_msk)
+ * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
* @dccps_hc_rx_ackvec - rx half connection ack vector
* @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
* @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection)
@@ -534,6 +538,7 @@ struct dccp_sock {
__u64 dccps_ndp_count:48;
unsigned long dccps_rate_last;
struct dccp_minisock dccps_minisock;
+ struct list_head dccps_featneg;
struct dccp_ackvec *dccps_hc_rx_ackvec;
struct ccid *dccps_hc_rx_ccid;
struct ccid *dccps_hc_tx_ccid;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 14126bc3664..aad99195a4c 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -12,8 +12,8 @@
* published by the Free Software Foundation.
*/
-#ifndef IEEE80211_H
-#define IEEE80211_H
+#ifndef LINUX_IEEE80211_H
+#define LINUX_IEEE80211_H
#include <linux/types.h>
#include <asm/byteorder.h>
@@ -685,28 +685,88 @@ struct ieee80211_bar {
#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
+#define IEEE80211_HT_MCS_MASK_LEN 10
+
+/**
+ * struct ieee80211_mcs_info - MCS information
+ * @rx_mask: RX mask
+ * @rx_highest: highest supported RX rate
+ * @tx_params: TX parameters
+ */
+struct ieee80211_mcs_info {
+ u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
+ __le16 rx_highest;
+ u8 tx_params;
+ u8 reserved[3];
+} __attribute__((packed));
+
+/* 802.11n HT capability MSC set */
+#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff
+#define IEEE80211_HT_MCS_TX_DEFINED 0x01
+#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02
+/* value 0 == 1 stream etc */
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4
+#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10
+
+/*
+ * 802.11n D5.0 20.3.5 / 20.6 says:
+ * - indices 0 to 7 and 32 are single spatial stream
+ * - 8 to 31 are multiple spatial streams using equal modulation
+ * [8..15 for two streams, 16..23 for three and 24..31 for four]
+ * - remainder are multiple spatial streams using unequal modulation
+ */
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
+ (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
+
/**
* struct ieee80211_ht_cap - HT capabilities
*
- * This structure refers to "HT capabilities element" as
- * described in 802.11n draft section 7.3.2.52
+ * This structure is the "HT capabilities element" as
+ * described in 802.11n D5.0 7.3.2.57
*/
struct ieee80211_ht_cap {
__le16 cap_info;
u8 ampdu_params_info;
- u8 supp_mcs_set[16];
+
+ /* 16 bytes MCS information */
+ struct ieee80211_mcs_info mcs;
+
__le16 extended_ht_cap_info;
__le32 tx_BF_cap_info;
u8 antenna_selection_info;
} __attribute__ ((packed));
+/* 802.11n HT capabilities masks (for cap_info) */
+#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
+#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
+#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+#define IEEE80211_HT_CAP_SGI_20 0x0020
+#define IEEE80211_HT_CAP_SGI_40 0x0040
+#define IEEE80211_HT_CAP_TX_STBC 0x0080
+#define IEEE80211_HT_CAP_RX_STBC 0x0300
+#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
+#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+
+/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
+#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
+#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+
/**
- * struct ieee80211_ht_cap - HT additional information
+ * struct ieee80211_ht_info - HT information
*
- * This structure refers to "HT information element" as
- * described in 802.11n draft section 7.3.2.53
+ * This structure is the "HT information element" as
+ * described in 802.11n D5.0 7.3.2.58
*/
-struct ieee80211_ht_addt_info {
+struct ieee80211_ht_info {
u8 control_chan;
u8 ht_param;
__le16 operation_mode;
@@ -714,36 +774,33 @@ struct ieee80211_ht_addt_info {
u8 basic_set[16];
} __attribute__ ((packed));
-/* 802.11n HT capabilities masks */
-#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
-#define IEEE80211_HT_CAP_SM_PS 0x000C
-#define IEEE80211_HT_CAP_GRN_FLD 0x0010
-#define IEEE80211_HT_CAP_SGI_20 0x0020
-#define IEEE80211_HT_CAP_SGI_40 0x0040
-#define IEEE80211_HT_CAP_DELAY_BA 0x0400
-#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
-#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
-/* 802.11n HT capability AMPDU settings */
-#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
-#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
-/* 802.11n HT capability MSC set */
-#define IEEE80211_SUPP_MCS_SET_UEQM 4
-#define IEEE80211_HT_CAP_MAX_STREAMS 4
-#define IEEE80211_SUPP_MCS_SET_LEN 10
-/* maximum streams the spec allows */
-#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
-#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
-#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
-#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
-/* 802.11n HT IE masks */
-#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
-#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
-#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
-#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
-#define IEEE80211_HT_IE_CHA_WIDTH 0x04
-#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
-#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
-#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
+/* for ht_param */
+#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03
+#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00
+#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01
+#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
+#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
+#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
+#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10
+#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0
+
+/* for operation_mode */
+#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1
+#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3
+#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004
+#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010
+
+/* for stbc_param */
+#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040
+#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080
+#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100
+#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200
+#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400
+#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800
+
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
@@ -769,8 +826,7 @@ struct ieee80211_ht_addt_info {
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FAST_BSS_TRANSITION 2
-#define WLAN_AUTH_LEAP 128
+#define WLAN_AUTH_LEAP 2
#define WLAN_AUTH_CHALLENGE_LEN 128
@@ -949,7 +1005,7 @@ enum ieee80211_eid {
WLAN_EID_EXT_SUPP_RATES = 50,
/* 802.11n */
WLAN_EID_HT_CAPABILITY = 45,
- WLAN_EID_HT_EXTRA_INFO = 61,
+ WLAN_EID_HT_INFORMATION = 61,
/* 802.11i */
WLAN_EID_RSN = 48,
WLAN_EID_WPA = 221,
@@ -1057,4 +1113,4 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
return hdr->addr1;
}
-#endif /* IEEE80211_H */
+#endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 65246846c84..2a6e29620a9 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -65,6 +65,7 @@
#define IFF_BONDING 0x20 /* bonding master or slave */
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
+#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fba141d3ca0..ed60f8718d8 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -357,18 +357,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
((unsigned char *)&addr)[3]
#define NIPQUAD_FMT "%u.%u.%u.%u"
-#define NIP6(addr) \
- ntohs((addr).s6_addr16[0]), \
- ntohs((addr).s6_addr16[1]), \
- ntohs((addr).s6_addr16[2]), \
- ntohs((addr).s6_addr16[3]), \
- ntohs((addr).s6_addr16[4]), \
- ntohs((addr).s6_addr16[5]), \
- ntohs((addr).s6_addr16[6]), \
- ntohs((addr).s6_addr16[7])
-#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
-#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
-
#if defined(__LITTLE_ENDIAN)
#define HIPQUAD(addr) \
((unsigned char *)&addr)[3], \
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9d77b1d7dca..12d7f4469dc 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1742,26 +1742,31 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
struct net_device *dev = skb->dev;
struct net_device *master = dev->master;
- if (master &&
- (dev->priv_flags & IFF_SLAVE_INACTIVE)) {
- if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
- skb->protocol == __constant_htons(ETH_P_ARP))
- return 0;
-
- if (master->priv_flags & IFF_MASTER_ALB) {
- if (skb->pkt_type != PACKET_BROADCAST &&
- skb->pkt_type != PACKET_MULTICAST)
+ if (master) {
+ if (master->priv_flags & IFF_MASTER_ARPMON)
+ dev->last_rx = jiffies;
+
+ if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
+ if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
+ skb->protocol == __constant_htons(ETH_P_ARP))
return 0;
- }
- if (master->priv_flags & IFF_MASTER_8023AD &&
- skb->protocol == __constant_htons(ETH_P_SLOW))
- return 0;
- return 1;
+ if (master->priv_flags & IFF_MASTER_ALB) {
+ if (skb->pkt_type != PACKET_BROADCAST &&
+ skb->pkt_type != PACKET_MULTICAST)
+ return 0;
+ }
+ if (master->priv_flags & IFF_MASTER_8023AD &&
+ skb->protocol == __constant_htons(ETH_P_SLOW))
+ return 0;
+
+ return 1;
+ }
}
return 0;
}
+extern struct pernet_operations __net_initdata loopback_net_ops;
#endif /* __KERNEL__ */
#endif /* _LINUX_DEV_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9bad65400fb..e4cc7869b22 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -106,6 +106,12 @@
* to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
* store this as a valid request and then query userspace for it.
*
+ * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -148,6 +154,9 @@ enum nl80211_commands {
NL80211_CMD_SET_REG,
NL80211_CMD_REQ_SET_REG,
+ NL80211_CMD_GET_MESH_PARAMS,
+ NL80211_CMD_SET_MESH_PARAMS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -296,6 +305,8 @@ enum nl80211_attrs {
NL80211_ATTR_REG_ALPHA2,
NL80211_ATTR_REG_RULES,
+ NL80211_ATTR_MESH_PARAMS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -452,17 +463,29 @@ enum nl80211_mpath_info {
* an array of nested frequency attributes
* @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
* an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ * defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
*/
enum nl80211_band_attr {
__NL80211_BAND_ATTR_INVALID,
NL80211_BAND_ATTR_FREQS,
NL80211_BAND_ATTR_RATES,
+ NL80211_BAND_ATTR_HT_MCS_SET,
+ NL80211_BAND_ATTR_HT_CAPA,
+ NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+ NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
};
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
/**
* enum nl80211_frequency_attr - frequency attributes
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
@@ -594,4 +617,79 @@ enum nl80211_mntr_flags {
NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
};
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+ __NL80211_MESHCONF_INVALID,
+ NL80211_MESHCONF_RETRY_TIMEOUT,
+ NL80211_MESHCONF_CONFIRM_TIMEOUT,
+ NL80211_MESHCONF_HOLDING_TIMEOUT,
+ NL80211_MESHCONF_MAX_PEER_LINKS,
+ NL80211_MESHCONF_MAX_RETRIES,
+ NL80211_MESHCONF_TTL,
+ NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ NL80211_MESHCONF_PATH_REFRESH_TIME,
+ NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+
+ /* keep last */
+ __NL80211_MESHCONF_ATTR_AFTER_LAST,
+ NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index e649bd3f2c9..3ba2998b22b 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -383,5 +383,22 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
pos = rcu_dereference(pos->next))
+/**
+ * hlist_for_each_entry_rcu_safenext - iterate over rcu list of given type
+ * @tpos: the type * to use as a loop cursor.
+ * @pos: the &struct hlist_node to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the hlist_node within the struct.
+ * @next: the &struct hlist_node to use as a next cursor
+ *
+ * Special version of hlist_for_each_entry_rcu that make sure
+ * each next pointer is fetched before each iteration.
+ */
+#define hlist_for_each_entry_rcu_safenext(tpos, pos, head, member, next) \
+ for (pos = rcu_dereference((head)->first); \
+ pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) && \
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
+ pos = rcu_dereference(next))
+
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2725f4e5a9b..a01b6f84e3b 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -250,6 +250,9 @@ typedef unsigned char *sk_buff_data_t;
* @tc_verd: traffic control verdict
* @ndisc_nodetype: router type (from link layer)
* @do_not_encrypt: set to prevent encryption of this frame
+ * @requeue: set to indicate that the wireless core should attempt
+ * a software retry on this frame if we failed to
+ * receive an ACK for it
* @dma_cookie: a cookie to one of several possible DMA operations
* done by skb DMA functions
* @secmark: security marking
@@ -269,8 +272,9 @@ struct sk_buff {
struct dst_entry *dst;
struct rtable *rtable;
};
+#ifdef CONFIG_XFRM
struct sec_path *sp;
-
+#endif
/*
* This is the control buffer. It is free to use for every
* layer. Please put your private variables there. If you
@@ -325,6 +329,7 @@ struct sk_buff {
#endif
#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
__u8 do_not_encrypt:1;
+ __u8 requeue:1;
#endif
/* 0/13/14 bit hole */
@@ -1864,6 +1869,18 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu
to->queue_mapping = from->queue_mapping;
}
+#ifdef CONFIG_XFRM
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+ return skb->sp;
+}
+#else
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+ return NULL;
+}
+#endif
+
static inline int skb_is_gso(const struct sk_buff *skb)
{
return skb_shinfo(skb)->gso_size;
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index 6fd7b016517..0127daca435 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -139,14 +139,14 @@ static inline char *__svc_print_addr(struct sockaddr *addr,
{
switch (addr->sa_family) {
case AF_INET:
- snprintf(buf, len, "%u.%u.%u.%u, port=%u",
- NIPQUAD(((struct sockaddr_in *) addr)->sin_addr),
+ snprintf(buf, len, "%pI4, port=%u",
+ &((struct sockaddr_in *)addr)->sin_addr,
ntohs(((struct sockaddr_in *) addr)->sin_port));
break;
case AF_INET6:
- snprintf(buf, len, "%x:%x:%x:%x:%x:%x:%x:%x, port=%u",
- NIP6(((struct sockaddr_in6 *) addr)->sin6_addr),
+ snprintf(buf, len, "%pI6, port=%u",
+ &((struct sockaddr_in6 *)addr)->sin6_addr,
ntohs(((struct sockaddr_in6 *) addr)->sin6_port));
break;
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 4bc1e6b86cb..52f3abd453a 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -199,6 +199,9 @@ enum {
#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
XFRM_MSG_GETSPDINFO,
#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
+
+ XFRM_MSG_MAPPING,
+#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
__XFRM_MSG_MAX
};
#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
@@ -438,6 +441,15 @@ struct xfrm_user_migrate {
__u16 new_family;
};
+struct xfrm_user_mapping {
+ struct xfrm_usersa_id id;
+ __u32 reqid;
+ xfrm_address_t old_saddr;
+ xfrm_address_t new_saddr;
+ __be16 old_sport;
+ __be16 new_sport;
+};
+
#ifndef __KERNEL__
/* backwards compatibility for userspace */
#define XFRMGRP_ACQUIRE 1
@@ -464,6 +476,8 @@ enum xfrm_nlgroups {
#define XFRMNLGRP_REPORT XFRMNLGRP_REPORT
XFRMNLGRP_MIGRATE,
#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE
+ XFRMNLGRP_MAPPING,
+#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING
__XFRMNLGRP_MAX
};
#define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-21 22:41:57 +0000