diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/mtd/iflash.h | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h deleted file mode 100644 index 9aa5b4f0266..00000000000 --- a/include/linux/mtd/iflash.h +++ /dev/null @@ -1,98 +0,0 @@ -/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */ - -#ifndef __MTD_IFLASH_H__ -#define __MTD_IFLASH_H__ - -/* Extended CIS registers for Series 2 and 2+ cards */ -/* The registers are all offsets from 0x4000 */ -#define CISREG_CSR 0x0100 -#define CISREG_WP 0x0104 -#define CISREG_RDYBSY 0x0140 - -/* Extended CIS registers for Series 2 cards */ -#define CISREG_SLEEP 0x0118 -#define CISREG_RDY_MASK 0x0120 -#define CISREG_RDY_STATUS 0x0130 - -/* Extended CIS registers for Series 2+ cards */ -#define CISREG_VCR 0x010c - -/* Card Status Register */ -#define CSR_SRESET 0x20 /* Soft reset */ -#define CSR_CMWP 0x10 /* Common memory write protect */ -#define CSR_PWRDOWN 0x08 /* Power down status */ -#define CSR_CISWP 0x04 /* Common memory CIS WP */ -#define CSR_WP 0x02 /* Mechanical write protect */ -#define CSR_READY 0x01 /* Ready/busy status */ - -/* Write Protection Register */ -#define WP_BLKEN 0x04 /* Enable block locking */ -#define WP_CMWP 0x02 /* Common memory write protect */ -#define WP_CISWP 0x01 /* Common memory CIS WP */ - -/* Voltage Control Register */ -#define VCR_VCC_LEVEL 0x80 /* 0 = 5V, 1 = 3.3V */ -#define VCR_VPP_VALID 0x02 /* Vpp Valid */ -#define VCR_VPP_GEN 0x01 /* Integrated Vpp generator */ - -/* Ready/Busy Mode Register */ -#define RDYBSY_RACK 0x02 /* Ready acknowledge */ -#define RDYBSY_MODE 0x01 /* 1 = high performance */ - -#define LOW(x) ((x) & 0xff) - -/* 28F008SA-Compatible Command Set */ -#define IF_READ_ARRAY 0xffff -#define IF_INTEL_ID 0x9090 -#define IF_READ_CSR 0x7070 -#define IF_CLEAR_CSR 0x5050 -#define IF_WRITE 0x4040 -#define IF_BLOCK_ERASE 0x2020 -#define IF_ERASE_SUSPEND 0xb0b0 -#define IF_CONFIRM 0xd0d0 - -/* 28F016SA Performance Enhancement Commands */ -#define IF_READ_PAGE 0x7575 -#define IF_PAGE_SWAP 0x7272 -#define IF_SINGLE_LOAD 0x7474 -#define IF_SEQ_LOAD 0xe0e0 -#define IF_PAGE_WRITE 0x0c0c -#define IF_RDY_MODE 0x9696 -#define IF_RDY_LEVEL 0x0101 -#define IF_RDY_PULSE_WRITE 0x0202 -#define IF_RDY_PULSE_ERASE 0x0303 -#define IF_RDY_DISABLE 0x0404 -#define IF_LOCK_BLOCK 0x7777 -#define IF_UPLOAD_STATUS 0x9797 -#define IF_READ_ESR 0x7171 -#define IF_ERASE_UNLOCKED 0xa7a7 -#define IF_SLEEP 0xf0f0 -#define IF_ABORT 0x8080 -#define IF_UPLOAD_DEVINFO 0x9999 - -/* Definitions for Compatible Status Register */ -#define CSR_WR_READY 0x8080 /* Write state machine status */ -#define CSR_ERA_SUSPEND 0x4040 /* Erase suspend status */ -#define CSR_ERA_ERR 0x2020 /* Erase status */ -#define CSR_WR_ERR 0x1010 /* Data write status */ -#define CSR_VPP_LOW 0x0808 /* Vpp status */ - -/* Definitions for Global Status Register */ -#define GSR_WR_READY 0x8080 /* Write state machine status */ -#define GSR_OP_SUSPEND 0x4040 /* Operation suspend status */ -#define GSR_OP_ERR 0x2020 /* Device operation status */ -#define GSR_SLEEP 0x1010 /* Device sleep status */ -#define GSR_QUEUE_FULL 0x0808 /* Queue status */ -#define GSR_PAGE_AVAIL 0x0404 /* Page buffer available status */ -#define GSR_PAGE_READY 0x0202 /* Page buffer status */ -#define GSR_PAGE_SELECT 0x0101 /* Page buffer select status */ - -/* Definitions for Block Status Register */ -#define BSR_READY 0x8080 /* Block status */ -#define BSR_UNLOCK 0x4040 /* Block lock status */ -#define BSR_FAILED 0x2020 /* Block operation status */ -#define BSR_ABORTED 0x1010 /* Operation abort status */ -#define BSR_QUEUE_FULL 0x0808 /* Queue status */ -#define BSR_VPP_LOW 0x0404 /* Vpp status */ - -#endif /* __MTD_IFLASH_H__ */ |