diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mmc/card.h | 29 | ||||
| -rw-r--r-- | include/linux/mmc/dw_mmc.h | 14 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 59 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 23 | ||||
| -rw-r--r-- | include/linux/mmc/sdhci.h | 15 | ||||
| -rw-r--r-- | include/linux/omap-dma.h | 19 | ||||
| -rw-r--r-- | include/linux/omap-dmaengine.h | 21 |
7 files changed, 105 insertions, 75 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index b73027298b3..d424b9de3af 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -63,12 +63,12 @@ struct mmc_ext_csd { unsigned int power_off_longtime; /* Units: ms */ u8 power_off_notification; /* state */ unsigned int hs_max_dtr; + unsigned int hs200_max_dtr; #define MMC_HIGH_26_MAX_DTR 26000000 #define MMC_HIGH_52_MAX_DTR 52000000 #define MMC_HIGH_DDR_MAX_DTR 52000000 #define MMC_HS200_MAX_DTR 200000000 unsigned int sectors; - unsigned int card_type; unsigned int hc_erase_size; /* In sectors */ unsigned int hc_erase_timeout; /* In milliseconds */ unsigned int sec_trim_mult; /* Secure trim multiplier */ @@ -110,6 +110,7 @@ struct mmc_ext_csd { u8 raw_pwr_cl_200_360; /* 237 */ u8 raw_pwr_cl_ddr_52_195; /* 238 */ u8 raw_pwr_cl_ddr_52_360; /* 239 */ + u8 raw_pwr_cl_ddr_200_360; /* 253 */ u8 raw_bkops_status; /* 246 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ @@ -194,6 +195,7 @@ struct sdio_cis { }; struct mmc_host; +struct mmc_ios; struct sdio_func; struct sdio_func_tuple; @@ -250,15 +252,11 @@ struct mmc_card { unsigned int state; /* (our) card state */ #define MMC_STATE_PRESENT (1<<0) /* present in sysfs */ #define MMC_STATE_READONLY (1<<1) /* card is read-only */ -#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ -#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ -#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ -#define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ -#define MMC_CARD_SDXC (1<<6) /* card is SDXC */ -#define MMC_CARD_REMOVED (1<<7) /* card has been removed */ -#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ -#define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ -#define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */ +#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */ +#define MMC_CARD_SDXC (1<<3) /* card is SDXC */ +#define MMC_CARD_REMOVED (1<<4) /* card has been removed */ +#define MMC_STATE_DOING_BKOPS (1<<5) /* card is doing BKOPS */ +#define MMC_STATE_SUSPENDED (1<<6) /* card is suspended */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -301,6 +299,7 @@ struct mmc_card { struct sdio_func_tuple *tuples; /* unknown common tuples */ unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */ + unsigned int mmc_avail_type; /* supported device type by both host and card */ struct dentry *debugfs_root; struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */ @@ -353,7 +352,7 @@ struct mmc_fixup { #define CID_OEMID_ANY ((unsigned short) -1) #define CID_NAME_ANY (NULL) -#define END_FIXUP { 0 } +#define END_FIXUP { NULL } #define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end, \ _cis_vendor, _cis_device, \ @@ -418,11 +417,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) -#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) -#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) -#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) -#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) #define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) @@ -430,11 +425,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) -#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) -#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) -#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) -#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) #define mmc_card_set_doing_bkops(c) ((c)->state |= MMC_STATE_DOING_BKOPS) diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 6ce7d2cd3c7..babaea93bca 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -248,20 +248,6 @@ struct dw_mci_board { /* delay in mS before detecting cards after interrupt */ u32 detect_delay_ms; - int (*init)(u32 slot_id, irq_handler_t , void *); - int (*get_ro)(u32 slot_id); - int (*get_cd)(u32 slot_id); - int (*get_ocr)(u32 slot_id); - int (*get_bus_wd)(u32 slot_id); - /* - * Enable power to selected slot and set voltage to desired level. - * Voltage levels are specified using MMC_VDD_xxx defines defined - * in linux/mmc/host.h file. - */ - void (*setpower)(u32 slot_id, u32 volt); - void (*exit)(u32 slot_id); - void (*select_slot)(u32 slot_id); - struct dw_mci_dma_ops *dma_ops; struct dma_pdata *data; struct block_settings *blk_settings; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index cb61ea4d694..7960424d0bc 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -17,6 +17,7 @@ #include <linux/fault-inject.h> #include <linux/mmc/core.h> +#include <linux/mmc/card.h> #include <linux/mmc/pm.h> struct mmc_ios { @@ -58,13 +59,9 @@ struct mmc_ios { #define MMC_TIMING_UHS_SDR50 5 #define MMC_TIMING_UHS_SDR104 6 #define MMC_TIMING_UHS_DDR50 7 -#define MMC_TIMING_MMC_HS200 8 - -#define MMC_SDR_MODE 0 -#define MMC_1_2V_DDR_MODE 1 -#define MMC_1_8V_DDR_MODE 2 -#define MMC_1_2V_SDR_MODE 3 -#define MMC_1_8V_SDR_MODE 4 +#define MMC_TIMING_MMC_DDR52 8 +#define MMC_TIMING_MMC_HS200 9 +#define MMC_TIMING_MMC_HS400 10 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -136,6 +133,9 @@ struct mmc_host_ops { /* The tuning command opcode value is different for SD and eMMC cards */ int (*execute_tuning)(struct mmc_host *host, u32 opcode); + + /* Prepare HS400 target operating frequency depending host driver */ + int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); void (*card_event)(struct mmc_host *host); @@ -278,6 +278,11 @@ struct mmc_host { #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ +#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ +#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ +#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ + MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -318,6 +323,8 @@ struct mmc_host { int rescan_disable; /* disable card detection */ int rescan_entered; /* used with nonremovable devices */ + bool trigger_card_event; /* card_event necessary */ + struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; @@ -391,12 +398,13 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host) wake_up_process(host->sdio_irq_thread); } +void sdio_run_irqs(struct mmc_host *host); + #ifdef CONFIG_REGULATOR int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); -int mmc_regulator_get_supply(struct mmc_host *mmc); #else static inline int mmc_regulator_get_ocrmask(struct regulator *supply) { @@ -409,13 +417,10 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, { return 0; } - -static inline int mmc_regulator_get_supply(struct mmc_host *mmc) -{ - return 0; -} #endif +int mmc_regulator_get_supply(struct mmc_host *mmc); + int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); static inline int mmc_card_is_removable(struct mmc_host *host) @@ -475,4 +480,32 @@ static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) return host->ios.clock; } #endif + +static inline int mmc_card_hs(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_SD_HS || + card->host->ios.timing == MMC_TIMING_MMC_HS; +} + +static inline int mmc_card_uhs(struct mmc_card *card) +{ + return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 && + card->host->ios.timing <= MMC_TIMING_UHS_DDR50; +} + +static inline bool mmc_card_hs200(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS200; +} + +static inline bool mmc_card_ddr52(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_DDR52; +} + +static inline bool mmc_card_hs400(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS400; +} + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 50bcde3677c..64ec963ed34 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -325,6 +325,7 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ @@ -354,18 +355,25 @@ struct _mmc_csd { #define EXT_CSD_CMD_SET_SECURE (1<<1) #define EXT_CSD_CMD_SET_CPSECURE (1<<2) -#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ -#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \ + EXT_CSD_CARD_TYPE_HS_52) #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ /* DDR mode @1.8V or 3V I/O */ #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ /* DDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) -#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */ -#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */ /* SDR mode @1.2V I/O */ +#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ + EXT_CSD_CARD_TYPE_HS200_1_2V) +#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */ +#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ +#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ + EXT_CSD_CARD_TYPE_HS400_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ @@ -373,6 +381,11 @@ struct _mmc_csd { #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ +#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ +#define EXT_CSD_TIMING_HS 1 /* High speed */ +#define EXT_CSD_TIMING_HS200 2 /* HS200 */ +#define EXT_CSD_TIMING_HS400 3 /* HS400 */ + #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) #define EXT_CSD_SEC_GB_CL_EN BIT(4) diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 7be12b88348..08abe994188 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -57,12 +57,8 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) /* Controller reports inverted write-protect state */ #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) -/* Controller has nonstandard clock management */ -#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17) /* Controller does not like fast PIO transfers */ #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) -/* Controller losing signal/interrupt enable states after reset */ -#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19) /* Controller has to be forced to use block size of 2048 bytes */ #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) /* Controller cannot do multi-block transfers */ @@ -147,6 +143,7 @@ struct sdhci_host { bool runtime_suspended; /* Host is runtime suspended */ bool bus_on; /* Bus power prevents runtime suspend */ + bool preset_enabled; /* Preset is enabled */ struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ @@ -164,8 +161,7 @@ struct sdhci_host { dma_addr_t adma_addr; /* Mapped ADMA descr. table */ dma_addr_t align_addr; /* Mapped bounce buffer */ - struct tasklet_struct card_tasklet; /* Tasklet structures */ - struct tasklet_struct finish_tasklet; + struct tasklet_struct finish_tasklet; /* Tasklet structures */ struct timer_list timer; /* Timer for timeouts */ @@ -177,6 +173,13 @@ struct sdhci_host { unsigned int ocr_avail_mmc; u32 ocr_mask; /* available voltages */ + unsigned timing; /* Current timing */ + + u32 thread_isr; + + /* cached registers */ + u32 ier; + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index c29a6dee6be..88e6ea4a5d3 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -1,23 +1,6 @@ -/* - * OMAP DMA Engine support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __LINUX_OMAP_DMA_H #define __LINUX_OMAP_DMA_H - -struct dma_chan; - -#if defined(CONFIG_DMA_OMAP) || (defined(CONFIG_DMA_OMAP_MODULE) && defined(MODULE)) -bool omap_dma_filter_fn(struct dma_chan *, void *); -#else -static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) -{ - return false; -} -#endif +#include <linux/omap-dmaengine.h> /* * Legacy OMAP DMA handling defines and functions diff --git a/include/linux/omap-dmaengine.h b/include/linux/omap-dmaengine.h new file mode 100644 index 00000000000..8e6906c72e9 --- /dev/null +++ b/include/linux/omap-dmaengine.h @@ -0,0 +1,21 @@ +/* + * OMAP DMA Engine support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_OMAP_DMAENGINE_H +#define __LINUX_OMAP_DMAENGINE_H + +struct dma_chan; + +#if defined(CONFIG_DMA_OMAP) || (defined(CONFIG_DMA_OMAP_MODULE) && defined(MODULE)) +bool omap_dma_filter_fn(struct dma_chan *, void *); +#else +static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) +{ + return false; +} +#endif +#endif /* __LINUX_OMAP_DMAENGINE_H */ |