summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/bcma/bcma.h224
-rw-r--r--include/linux/bcma/bcma_driver_chipcommon.h302
-rw-r--r--include/linux/bcma/bcma_driver_pci.h89
-rw-r--r--include/linux/bcma/bcma_regs.h34
-rw-r--r--include/linux/ieee80211.h11
-rw-r--r--include/linux/mod_devicetable.h17
-rw-r--r--include/linux/nl80211.h302
-rw-r--r--include/linux/ssb/ssb.h1
8 files changed, 976 insertions, 4 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 00000000000..08763e4e848
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+ BCMA_HOSTTYPE_NONE,
+ BCMA_HOSTTYPE_PCI,
+ BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+ u16 id;
+ u8 rev;
+ u8 pkg;
+};
+
+struct bcma_host_ops {
+ u8 (*read8)(struct bcma_device *core, u16 offset);
+ u16 (*read16)(struct bcma_device *core, u16 offset);
+ u32 (*read32)(struct bcma_device *core, u16 offset);
+ void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+ void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+ void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+ /* Agent ops */
+ u32 (*aread32)(struct bcma_device *core, u16 offset);
+ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM 0x43B
+#define BCMA_MANUF_MIPS 0x4A7
+#define BCMA_MANUF_BCM 0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM 0x0
+#define BCMA_CL_EROM 0x1
+#define BCMA_CL_CORESIGHT 0x9
+#define BCMA_CL_VERIF 0xB
+#define BCMA_CL_OPTIMO 0xD
+#define BCMA_CL_GEN 0xE
+#define BCMA_CL_PRIMECELL 0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
+#define BCMA_CORE_INVALID 0x700
+#define BCMA_CORE_CHIPCOMMON 0x800
+#define BCMA_CORE_ILINE20 0x801
+#define BCMA_CORE_SRAM 0x802
+#define BCMA_CORE_SDRAM 0x803
+#define BCMA_CORE_PCI 0x804
+#define BCMA_CORE_MIPS 0x805
+#define BCMA_CORE_ETHERNET 0x806
+#define BCMA_CORE_V90 0x807
+#define BCMA_CORE_USB11_HOSTDEV 0x808
+#define BCMA_CORE_ADSL 0x809
+#define BCMA_CORE_ILINE100 0x80A
+#define BCMA_CORE_IPSEC 0x80B
+#define BCMA_CORE_UTOPIA 0x80C
+#define BCMA_CORE_PCMCIA 0x80D
+#define BCMA_CORE_INTERNAL_MEM 0x80E
+#define BCMA_CORE_MEMC_SDRAM 0x80F
+#define BCMA_CORE_OFDM 0x810
+#define BCMA_CORE_EXTIF 0x811
+#define BCMA_CORE_80211 0x812
+#define BCMA_CORE_PHY_A 0x813
+#define BCMA_CORE_PHY_B 0x814
+#define BCMA_CORE_PHY_G 0x815
+#define BCMA_CORE_MIPS_3302 0x816
+#define BCMA_CORE_USB11_HOST 0x817
+#define BCMA_CORE_USB11_DEV 0x818
+#define BCMA_CORE_USB20_HOST 0x819
+#define BCMA_CORE_USB20_DEV 0x81A
+#define BCMA_CORE_SDIO_HOST 0x81B
+#define BCMA_CORE_ROBOSWITCH 0x81C
+#define BCMA_CORE_PARA_ATA 0x81D
+#define BCMA_CORE_SATA_XORDMA 0x81E
+#define BCMA_CORE_ETHERNET_GBIT 0x81F
+#define BCMA_CORE_PCIE 0x820
+#define BCMA_CORE_PHY_N 0x821
+#define BCMA_CORE_SRAM_CTL 0x822
+#define BCMA_CORE_MINI_MACPHY 0x823
+#define BCMA_CORE_ARM_1176 0x824
+#define BCMA_CORE_ARM_7TDMI 0x825
+#define BCMA_CORE_PHY_LP 0x826
+#define BCMA_CORE_PMU 0x827
+#define BCMA_CORE_PHY_SSN 0x828
+#define BCMA_CORE_SDIO_DEV 0x829
+#define BCMA_CORE_ARM_CM3 0x82A
+#define BCMA_CORE_PHY_HT 0x82B
+#define BCMA_CORE_MIPS_74K 0x82C
+#define BCMA_CORE_MAC_GBIT 0x82D
+#define BCMA_CORE_DDR12_MEM_CTL 0x82E
+#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE 0x830
+#define BCMA_CORE_SHARED_COMMON 0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE 0x832
+#define BCMA_CORE_SPI_HOST 0x833
+#define BCMA_CORE_I2S 0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT 0xFFF
+
+#define BCMA_MAX_NR_CORES 16
+
+struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
+
+ struct device dev;
+ bool dev_registered;
+
+ u8 core_index;
+
+ u32 addr;
+ u32 wrap;
+
+ void *drvdata;
+ struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+ return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+ core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+ const char *name;
+ const struct bcma_device_id *id_table;
+
+ int (*probe)(struct bcma_device *dev);
+ void (*remove)(struct bcma_device *dev);
+ int (*suspend)(struct bcma_device *dev, pm_message_t state);
+ int (*resume)(struct bcma_device *dev);
+ void (*shutdown)(struct bcma_device *dev);
+
+ struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+ return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+ /* The MMIO area. */
+ void __iomem *mmio;
+
+ const struct bcma_host_ops *ops;
+
+ enum bcma_hosttype hosttype;
+ union {
+ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+ struct pci_dev *host_pci;
+ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+ struct sdio_func *host_sdio;
+ };
+
+ struct bcma_chipinfo chipinfo;
+
+ struct bcma_device *mapped_core;
+ struct list_head cores;
+ u8 nr_cores;
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 00000000000..083c3b6cd5c
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,302 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID 0x0000
+#define BCMA_CC_ID_ID 0x0000FFFF
+#define BCMA_CC_ID_ID_SHIFT 0
+#define BCMA_CC_ID_REV 0x000F0000
+#define BCMA_CC_ID_REV_SHIFT 16
+#define BCMA_CC_ID_PKG 0x00F00000
+#define BCMA_CC_ID_PKG_SHIFT 20
+#define BCMA_CC_ID_NRCORES 0x0F000000
+#define BCMA_CC_ID_NRCORES_SHIFT 24
+#define BCMA_CC_ID_TYPE 0xF0000000
+#define BCMA_CC_ID_TYPE_SHIFT 28
+#define BCMA_CC_CAP 0x0004 /* Capabilities */
+#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
+#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
+#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
+#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
+#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
+#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
+#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
+#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+#define BCMA_PLLTYPE_NONE 0x00000000
+#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
+#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
+#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
+#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
+#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
+#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
+#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
+#define BCMA_CC_CAP_OTPS_SHIFT 19
+#define BCMA_CC_CAP_OTPS_BASE 5
+#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
+#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
+#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
+#define BCMA_CC_CORECTL 0x0008
+#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST 0x000C
+#define BCMA_CC_OTPS 0x0010 /* OTP status */
+#define BCMA_CC_OTPS_PROGFAIL 0x80000000
+#define BCMA_CC_OTPS_PROTECT 0x00000007
+#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
+#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
+#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
+#define BCMA_CC_OTPC 0x0014 /* OTP control */
+#define BCMA_CC_OTPC_RECWAIT 0xFF000000
+#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
+#define BCMA_CC_OTPC_PRW_SHIFT 8
+#define BCMA_CC_OTPC_MAXFAIL 0x00000038
+#define BCMA_CC_OTPC_VSEL 0x00000006
+#define BCMA_CC_OTPC_SELVL 0x00000001
+#define BCMA_CC_OTPP 0x0018 /* OTP prog */
+#define BCMA_CC_OTPP_COL 0x000000FF
+#define BCMA_CC_OTPP_ROW 0x0000FF00
+#define BCMA_CC_OTPP_ROW_SHIFT 8
+#define BCMA_CC_OTPP_READERR 0x10000000
+#define BCMA_CC_OTPP_VALUE 0x20000000
+#define BCMA_CC_OTPP_READ 0x40000000
+#define BCMA_CC_OTPP_START 0x80000000
+#define BCMA_CC_OTPP_BUSY 0x80000000
+#define BCMA_CC_IRQSTAT 0x0020
+#define BCMA_CC_IRQMASK 0x0024
+#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
+#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
+#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
+#define BCMA_CC_JCMD_START 0x80000000
+#define BCMA_CC_JCMD_BUSY 0x80000000
+#define BCMA_CC_JCMD_PAUSE 0x40000000
+#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
+#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD0_ACC_DR 0x00001000
+#define BCMA_CC_JCMD0_ACC_IR 0x00002000
+#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
+#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
+#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
+#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
+#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
+#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD_ACC_DR 0x00010000
+#define BCMA_CC_JCMD_ACC_IR 0x00020000
+#define BCMA_CC_JCMD_ACC_RESET 0x00030000
+#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
+#define BCMA_CC_JCMD_ACC_PDR 0x00050000
+#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
+#define BCMA_CC_JCMD_IRW_SHIFT 8
+#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
+#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
+#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
+#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
+#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
+#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+#define BCMA_CC_FLASHCTL 0x0040
+#define BCMA_CC_FLASHCTL_START 0x80000000
+#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR 0x0044
+#define BCMA_CC_FLASHDATA 0x0048
+#define BCMA_CC_BCAST_ADDR 0x0050
+#define BCMA_CC_BCAST_DATA 0x0054
+#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
+#define BCMA_CC_GPIOIN 0x0060
+#define BCMA_CC_GPIOOUT 0x0064
+#define BCMA_CC_GPIOOUTEN 0x0068
+#define BCMA_CC_GPIOCTL 0x006C
+#define BCMA_CC_GPIOPOL 0x0070
+#define BCMA_CC_GPIOIRQ 0x0074
+#define BCMA_CC_WATCHDOG 0x0080
+#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
+#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
+#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
+#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
+#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N 0x0090
+#define BCMA_CC_CLOCK_SB 0x0094
+#define BCMA_CC_CLOCK_PCI 0x0098
+#define BCMA_CC_CLOCK_M2 0x009C
+#define BCMA_CC_CLOCK_MIPS 0x00A0
+#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
+#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
+#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
+#define BCMA_CC_CLKDIV_OTP 0x000F0000
+#define BCMA_CC_CLKDIV_OTP_SHIFT 16
+#define BCMA_CC_CLKDIV_JTAG 0x00000F00
+#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
+#define BCMA_CC_CLKDIV_UART 0x000000FF
+#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
+#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
+#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
+#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
+#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
+#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
+#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
+#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
+#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
+#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
+#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
+#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
+#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
+#define BCMA_CC_EROM 0x00FC
+#define BCMA_CC_PCMCIA_CFG 0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
+#define BCMA_CC_PCMCIA_IOWAIT 0x010C
+#define BCMA_CC_IDE_CFG 0x0110
+#define BCMA_CC_IDE_MEMWAIT 0x0114
+#define BCMA_CC_IDE_ATTRWAIT 0x0118
+#define BCMA_CC_IDE_IOWAIT 0x011C
+#define BCMA_CC_PROG_CFG 0x0120
+#define BCMA_CC_PROG_WAITCNT 0x0124
+#define BCMA_CC_FLASH_CFG 0x0128
+#define BCMA_CC_FLASH_WAITCNT 0x012C
+#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
+#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
+#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
+#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
+#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA 0x0300
+#define BCMA_CC_UART0_IMR 0x0304
+#define BCMA_CC_UART0_FCR 0x0308
+#define BCMA_CC_UART0_LCR 0x030C
+#define BCMA_CC_UART0_MCR 0x0310
+#define BCMA_CC_UART0_LSR 0x0314
+#define BCMA_CC_UART0_MSR 0x0318
+#define BCMA_CC_UART0_SCRATCH 0x031C
+#define BCMA_CC_UART1_DATA 0x0400
+#define BCMA_CC_UART1_IMR 0x0404
+#define BCMA_CC_UART1_FCR 0x0408
+#define BCMA_CC_UART1_LCR 0x040C
+#define BCMA_CC_UART1_MCR 0x0410
+#define BCMA_CC_UART1_LSR 0x0414
+#define BCMA_CC_UART1_MSR 0x0418
+#define BCMA_CC_UART1_SCRATCH 0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
+#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
+#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
+#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
+#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
+#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
+#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR 0x0650
+#define BCMA_CC_CHIPCTL_DATA 0x0654
+#define BCMA_CC_REGCTL_ADDR 0x0658
+#define BCMA_CC_REGCTL_DATA 0x065C
+#define BCMA_CC_PLLCTL_ADDR 0x0660
+#define BCMA_CC_PLLCTL_DATA 0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+ u8 rev; /* PMU revision */
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+ struct bcma_device *core;
+ u32 status;
+ u32 capabilities;
+ u32 capabilities_ext;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+ bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+ bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+ u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 00000000000..b7e191cf00e
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
+#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
+#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
+#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
+#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
+#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
+#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
+#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
+#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
+#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
+#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
+#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
+#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
+#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
+#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
+#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
+#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
+#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+ struct bcma_device *core;
+ u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 00000000000..f82d88a960c
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL 0x0408
+#define BCMA_IOCTL_CLK 0x0001
+#define BCMA_IOCTL_FGC 0x0002
+#define BCMA_IOCTL_CORE_BITS 0x3FFC
+#define BCMA_IOCTL_PME_EN 0x4000
+#define BCMA_IOCTL_BIST_EN 0x8000
+#define BCMA_RESET_CTL 0x0800
+#define BCMA_RESET_CTL_RESET 0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR 0x44
+#define BCMA_PCI_PE 0x100
+#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
+#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
+#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
+#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2 0xAC
+#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
+#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
+#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
+#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 79690b71066..b2eee587988 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1002,6 +1002,11 @@ struct ieee80211_ht_info {
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
+
+/* A mesh STA sets the ESS and IBSS capability bits to zero */
+#define WLAN_CAPABILITY_IS_MBSS(cap) \
+ (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
#define WLAN_CAPABILITY_PRIVACY (1<<4)
@@ -1261,9 +1266,8 @@ enum ieee80211_category {
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
WLAN_CATEGORY_WMM = 17,
- /* TODO: remove MESH_PLINK and MESH_PATH_SEL after */
- /* mesh is updated to current 802.11s draft */
- WLAN_CATEGORY_MESH_PLINK = 30,
+ /* TODO: remove MESH_PATH_SEL after mesh is updated
+ * to current 802.11s draft */
WLAN_CATEGORY_MESH_PATH_SEL = 32,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
@@ -1516,6 +1520,7 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
category = ((u8 *) hdr) + 24;
return *category != WLAN_CATEGORY_PUBLIC &&
*category != WLAN_CATEGORY_HT &&
+ *category != WLAN_CATEGORY_SELF_PROTECTED &&
*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
}
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007dae47..ae28e93fd07 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@ struct ssb_device_id {
#define SSB_ANY_ID 0xFFFF
#define SSB_ANY_REV 0xFF
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+ __u16 manuf;
+ __u16 id;
+ __u8 rev;
+ __u8 class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class) \
+ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END \
+ { 0, },
+
+#define BCMA_ANY_MANUF 0xFFFF
+#define BCMA_ANY_ID 0xFFFF
+#define BCMA_ANY_REV 0xFF
+#define BCMA_ANY_CLASS 0xFF
+
struct virtio_device_id {
__u32 device;
__u32 vendor;
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 216b1d8a862..c7ccaae15af 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -77,6 +77,39 @@
*/
/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -203,6 +236,28 @@
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
* partial scan results may be available
*
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ * are passed, they are used in the probe requests. For
+ * broadcast, a broadcast SSID must be passed (ie. an empty
+ * string). If no SSID is passed, no probe requests are sent and
+ * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
+ * if passed, define which channels should be scanned; if not
+ * passed, all channels allowed for the current regulatory domain
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ * results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ * stopped. The driver may issue this event at any time during a
+ * scheduled scan. One reason for stopping the scan is if the hardware
+ * does not support starting an association or a normal scan while running
+ * a scheduled scan. This event is also sent when the
+ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ * is brought down while a scheduled scan was running.
+ *
* @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
* or noise level
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
@@ -420,6 +475,14 @@
* new station with the AUTHENTICATED flag unset and maybe change it later
* depending on the authentication result.
*
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ * Since wireless is more complex than wired ethernet, it supports
+ * various triggers. These triggers can be configured through this
+ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ * more background information, see
+ * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -534,6 +597,14 @@ enum nl80211_commands {
NL80211_CMD_NEW_PEER_CANDIDATE,
+ NL80211_CMD_GET_WOWLAN,
+ NL80211_CMD_SET_WOWLAN,
+
+ NL80211_CMD_START_SCHED_SCAN,
+ NL80211_CMD_STOP_SCHED_SCAN,
+ NL80211_CMD_SCHED_SCAN_RESULTS,
+ NL80211_CMD_SCHED_SCAN_STOPPED,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -902,6 +973,28 @@ enum nl80211_commands {
* @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
* allows auth frames in a mesh to be passed to userspace for processing via
* the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ * defined in &enum nl80211_plink_state. Used when userspace is
+ * driving the peer link management state machine.
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
+ * the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ * indicate which WoW triggers should be enabled. This is also
+ * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ * triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ * cycles, in msecs.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ * interface combinations. In each nested item, it contains attributes
+ * defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ * are managed in software: interfaces of these types aren't subject to
+ * any restrictions in their number or combinations.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1091,6 +1184,15 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
NL80211_ATTR_SUPPORT_MESH_AUTH,
+ NL80211_ATTR_STA_PLINK_STATE,
+
+ NL80211_ATTR_WOWLAN_TRIGGERS,
+ NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+ NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+ NL80211_ATTR_INTERFACE_COMBINATIONS,
+ NL80211_ATTR_SOFTWARE_IFTYPES,
/* add attributes here, update the policy in nl80211.c */
@@ -1144,7 +1246,9 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_ADHOC: independent BSS member
* @NL80211_IFTYPE_STATION: managed BSS member
* @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ * are a bit special in that they must always be tied to a pre-existing
+ * AP type interface.
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
@@ -1293,6 +1397,7 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_LLID: the station's mesh LLID
* @NL80211_STA_INFO_PLID: the station's mesh PLID
* @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * (see %enum nl80211_plink_state)
* @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
* attribute, like NL80211_STA_INFO_TX_BITRATE.
* @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
@@ -1748,6 +1853,15 @@ enum nl80211_meshconf_params {
* @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
* daemon will be authenticating mesh candidates.
*
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames. AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon. When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management). When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
*/
@@ -1757,6 +1871,7 @@ enum nl80211_mesh_setup_params {
NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
NL80211_MESH_SETUP_IE,
NL80211_MESH_SETUP_USERSPACE_AUTH,
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2061,4 +2176,189 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * a bit for each byte in the pattern. The lowest-order bit corresponds
+ * to the first byte of the pattern, but the bytes of the pattern are
+ * in a little-endian-like format, i.e. the 9th byte of the pattern
+ * corresponds to the lowest-order bit in the second byte of the mask.
+ * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ * xx indicates "don't care") would be represented by a pattern of
+ * twelve zero bytes, and a mask of "0xed,0x07".
+ * Note that the pattern matching is done as though frames were not
+ * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ * first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+ __NL80211_WOWLAN_PKTPAT_INVALID,
+ NL80211_WOWLAN_PKTPAT_MASK,
+ NL80211_WOWLAN_PKTPAT_PATTERN,
+
+ NUM_NL80211_WOWLAN_PKTPAT,
+ MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+ __u32 max_patterns;
+ __u32 min_pattern_len;
+ __u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ * the chip into a special state -- works best with chips that have
+ * support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ * is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ * by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ * which are passed in an array of nested attributes, each nested attribute
+ * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ * Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ * i.e. as though the packet was an 802.3 packet, so the pattern matching
+ * is done after the packet is converted to the MSDU.
+ *
+ * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ * carrying a &struct nl80211_wowlan_pattern_support.
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+ __NL80211_WOWLAN_TRIG_INVALID,
+ NL80211_WOWLAN_TRIG_ANY,
+ NL80211_WOWLAN_TRIG_DISCONNECT,
+ NL80211_WOWLAN_TRIG_MAGIC_PKT,
+ NL80211_WOWLAN_TRIG_PKT_PATTERN,
+
+ /* keep last */
+ NUM_NL80211_WOWLAN_TRIG,
+ MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ * can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ * flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+ NL80211_IFACE_LIMIT_UNSPEC,
+ NL80211_IFACE_LIMIT_MAX,
+ NL80211_IFACE_LIMIT_TYPES,
+
+ /* keep last */
+ NUM_NL80211_IFACE_LIMIT,
+ MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ * for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ * interfaces that can be created in this group. This number doesn't
+ * apply to interfaces purely managed in software, which are listed
+ * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ * beacon intervals within this group must be all the same even for
+ * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ * the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ * different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ * => allows an AP and a STA that must match BIs
+ *
+ * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ * => allows 8 of AP/GO
+ *
+ * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ * => allows two STAs on different channels
+ *
+ * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ * => allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_UNSPEC,
+ NL80211_IFACE_COMB_LIMITS,
+ NL80211_IFACE_COMB_MAXNUM,
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+
+ /* keep last */
+ NUM_NL80211_IFACE_COMB,
+ MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ * state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ * this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ * from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ * received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ * plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+ NL80211_PLINK_LISTEN,
+ NL80211_PLINK_OPN_SNT,
+ NL80211_PLINK_OPN_RCVD,
+ NL80211_PLINK_CNF_RCVD,
+ NL80211_PLINK_ESTAB,
+ NL80211_PLINK_HOLDING,
+ NL80211_PLINK_BLOCKED,
+
+ /* keep last */
+ NUM_NL80211_PLINK_STATES,
+ MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 7e99b348834..f017b8900f7 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -518,6 +518,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+extern void ssb_commit_settings(struct ssb_bus *bus);
/* Various helper functions */
extern u32 ssb_admatch_base(u32 adm);