summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/journal-head.h8
-rw-r--r--include/linux/kref.h33
-rw-r--r--include/linux/mfd/abx500/ab8500.h2
-rw-r--r--include/linux/mlx4/qp.h29
-rw-r--r--include/linux/of_platform.h5
-rw-r--r--include/linux/pinctrl/pinconf-generic.h12
-rw-r--r--include/linux/printk.h1
-rw-r--r--include/linux/socket.h2
-rw-r--r--include/linux/spi/spi.h4
-rw-r--r--include/linux/time.h4
-rw-r--r--include/linux/uio.h3
-rw-r--r--include/linux/usb/gadget.h5
-rw-r--r--include/linux/usb/serial.h4
13 files changed, 87 insertions, 25 deletions
diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h
index 13a3da25ff0..98cd41bb39c 100644
--- a/include/linux/journal-head.h
+++ b/include/linux/journal-head.h
@@ -30,15 +30,19 @@ struct journal_head {
/*
* Journalling list for this buffer [jbd_lock_bh_state()]
+ * NOTE: We *cannot* combine this with b_modified into a bitfield
+ * as gcc would then (which the C standard allows but which is
+ * very unuseful) make 64-bit accesses to the bitfield and clobber
+ * b_jcount if its update races with bitfield modification.
*/
- unsigned b_jlist:4;
+ unsigned b_jlist;
/*
* This flag signals the buffer has been modified by
* the currently running transaction
* [jbd_lock_bh_state()]
*/
- unsigned b_modified:1;
+ unsigned b_modified;
/*
* Copy of the buffer data frozen for writing to the log.
diff --git a/include/linux/kref.h b/include/linux/kref.h
index e15828fd71f..484604d184b 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -19,6 +19,7 @@
#include <linux/atomic.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
+#include <linux/spinlock.h>
struct kref {
atomic_t refcount;
@@ -98,6 +99,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref)
return kref_sub(kref, 1, release);
}
+/**
+ * kref_put_spinlock_irqsave - decrement refcount for object.
+ * @kref: object.
+ * @release: pointer to the function that will clean up the object when the
+ * last reference to the object is released.
+ * This pointer is required, and it is not acceptable to pass kfree
+ * in as this function.
+ * @lock: lock to take in release case
+ *
+ * Behaves identical to kref_put with one exception. If the reference count
+ * drops to zero, the lock will be taken atomically wrt dropping the reference
+ * count. The release function has to call spin_unlock() without _irqrestore.
+ */
+static inline int kref_put_spinlock_irqsave(struct kref *kref,
+ void (*release)(struct kref *kref),
+ spinlock_t *lock)
+{
+ unsigned long flags;
+
+ WARN_ON(release == NULL);
+ if (atomic_add_unless(&kref->refcount, -1, 1))
+ return 0;
+ spin_lock_irqsave(lock, flags);
+ if (atomic_dec_and_test(&kref->refcount)) {
+ release(kref);
+ local_irq_restore(flags);
+ return 1;
+ }
+ spin_unlock_irqrestore(lock, flags);
+ return 0;
+}
+
static inline int kref_put_mutex(struct kref *kref,
void (*release)(struct kref *kref),
struct mutex *lock)
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index fb1bf7d6a41..0390d5943ed 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data;
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
- * @pm_power_off: Should machine pm power off hook be registered or not
* @init: board-specific initialization after detection of ab8500
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
int irq_base;
- bool pm_power_off;
void (*init) (struct ab8500 *);
struct ab8500_regulator_platform_data *regulator;
struct abx500_gpio_platform_data *gpio;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 67f46ad6920..352eec9df1b 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -126,7 +126,7 @@ struct mlx4_rss_context {
struct mlx4_qp_path {
u8 fl;
- u8 reserved1[1];
+ u8 vlan_control;
u8 disable_pkey_check;
u8 pkey_index;
u8 counter_index;
@@ -141,11 +141,32 @@ struct mlx4_qp_path {
u8 sched_queue;
u8 vlan_index;
u8 feup;
- u8 reserved3;
+ u8 fvl_rx;
u8 reserved4[2];
u8 dmac[6];
};
+enum { /* fl */
+ MLX4_FL_CV = 1 << 6,
+ MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2
+};
+enum { /* vlan_control */
+ MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6,
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2,
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0
+};
+
+enum { /* feup */
+ MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */
+ MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */
+ MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */
+};
+
+enum { /* fvl_rx */
+ MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */
+};
+
struct mlx4_qp_context {
__be32 flags;
__be32 pd;
@@ -185,6 +206,10 @@ struct mlx4_qp_context {
u32 reserved5[10];
};
+enum { /* param3 */
+ MLX4_STRIP_VLAN = 1 << 30
+};
+
/* Which firmware version adds support for NEC (NoErrorCompletion) bit */
#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 3863a4dbdf1..2a93b64a386 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -11,9 +11,10 @@
*
*/
-#ifdef CONFIG_OF_DEVICE
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+
+#ifdef CONFIG_OF_DEVICE
#include <linux/pm.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
@@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root,
#if !defined(CONFIG_OF_ADDRESS)
struct of_dev_auxdata;
-struct device;
+struct device_node;
static inline int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 72474e18f1e..6aa23809662 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -37,17 +37,17 @@
* if it is 0, pull-down is disabled.
* @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
* low, this is the most typical case and is typically achieved with two
- * active transistors on the output. Sending this config will enabale
+ * active transistors on the output. Setting this config will enable
* push-pull mode, the argument is ignored.
* @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
* collector) which means it is usually wired with other output ports
- * which are then pulled up with an external resistor. Sending this
- * config will enabale open drain mode, the argument is ignored.
+ * which are then pulled up with an external resistor. Setting this
+ * config will enable open drain mode, the argument is ignored.
* @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- * (open emitter). Sending this config will enabale open drain mode, the
+ * (open emitter). Setting this config will enable open drain mode, the
* argument is ignored.
- * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
- * argument. The argument is in mA.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
+ * passed as argument. The argument is in mA.
* @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
* If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
* schmitt-trigger mode is disabled.
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 6af944ab38f..22c7052e937 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -4,6 +4,7 @@
#include <stdarg.h>
#include <linux/init.h>
#include <linux/kern_levels.h>
+#include <linux/linkage.h>
extern const char linux_banner[];
extern const char linux_proc_banner[];
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 428c37a1f95..33bf2dfab19 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -305,7 +305,6 @@ struct ucred {
extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
-extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
int offset, int len);
extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
@@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
unsigned int len, __wsum *csump);
extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
-extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
int offset, int len);
extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 733eb5ee31c..6ff26c8db7b 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type;
* @modalias: Name of the driver to use with this device, or an alias
* for that name. This appears in the sysfs "modalias" attribute
* for driver coldplugging, and in uevents used for hotplugging
- * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
+ * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when
* when not using a GPIO line)
*
* A @spi_device is used to interchange data between an SPI slave
@@ -266,7 +266,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
- * number. Any individual value may be -EINVAL for CS lines that
+ * number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
*
* Each SPI master controller can communicate with one or more @spi_device
diff --git a/include/linux/time.h b/include/linux/time.h
index 22d81b3c955..d5d229b2e5a 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts)
extern bool persistent_clock_exist;
-#ifdef ALWAYS_USE_PERSISTENT_CLOCK
-#define has_persistent_clock() true
-#else
static inline bool has_persistent_clock(void)
{
return persistent_clock_exist;
}
-#endif
extern void read_persistent_clock(struct timespec *ts);
extern void read_boot_clock(struct timespec *ts);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 629aaf51f30..c55ce243cc0 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
}
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len);
#endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index c454a88abf2..f1b0dca60f1 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
}
/**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
*/
static inline int gadget_is_superspeed(struct usb_gadget *g)
{
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9b0f7b4e43..302ddf55d2d 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -268,6 +268,8 @@ struct usb_serial_driver {
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@@ -327,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 23:31:01 +0000