summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/mfd/abx500.h27
-rw-r--r--include/linux/mfd/abx500/ab8500-bm.h61
-rw-r--r--include/linux/mfd/abx500/ab8500-gpadc.h74
-rw-r--r--include/linux/mfd/abx500/ab8500-sysctrl.h6
-rw-r--r--include/linux/mfd/abx500/ab8500.h3
-rw-r--r--include/linux/mfd/abx500/ux500_chargalg.h7
-rw-r--r--include/linux/mfd/tps65090.h5
-rw-r--r--include/linux/pm2301_charger.h2
-rw-r--r--include/linux/power/ab8500.h16
-rw-r--r--include/linux/power_supply.h6
-rw-r--r--include/linux/vexpress.h3
11 files changed, 180 insertions, 30 deletions
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 9ead60bc66b..3301b2031c8 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -89,6 +89,11 @@ struct abx500_fg;
* points.
* @maint_thres This is the threshold where we stop reporting
* battery full while in maintenance, in per cent
+ * @pcut_enable: Enable power cut feature in ab8505
+ * @pcut_max_time: Max time threshold
+ * @pcut_flag_time: Flagtime threshold
+ * @pcut_max_restart: Max number of restarts
+ * @pcut_debounce_time: Sets battery debounce time
*/
struct abx500_fg_parameters {
int recovery_sleep_timer;
@@ -106,6 +111,11 @@ struct abx500_fg_parameters {
int battok_raising_th_sel1;
int user_cap_limit;
int maint_thres;
+ bool pcut_enable;
+ u8 pcut_max_time;
+ u8 pcut_flag_time;
+ u8 pcut_max_restart;
+ u8 pcut_debounce_time;
};
/**
@@ -173,11 +183,11 @@ struct abx500_battery_type {
int low_high_vol_lvl;
int battery_resistance;
int n_temp_tbl_elements;
- struct abx500_res_to_temp *r_to_t_tbl;
+ const struct abx500_res_to_temp *r_to_t_tbl;
int n_v_cap_tbl_elements;
- struct abx500_v_to_cap *v_to_cap_tbl;
+ const struct abx500_v_to_cap *v_to_cap_tbl;
int n_batres_tbl_elements;
- struct batres_vs_temp *batres_tbl;
+ const struct batres_vs_temp *batres_tbl;
};
/**
@@ -236,7 +246,11 @@ struct abx500_bm_charger_parameters {
* @interval_not_charging charge alg cycle period time when not charging (sec)
* @temp_hysteresis temperature hysteresis
* @gnd_lift_resistance Battery ground to phone ground resistance (mOhm)
- * @maxi: maximization parameters
+ * @n_chg_out_curr number of elements in array chg_output_curr
+ * @n_chg_in_curr number of elements in array chg_input_curr
+ * @chg_output_curr charger output current level map
+ * @chg_input_curr charger input current level map
+ * @maxi maximization parameters
* @cap_levels capacity in percent for the different capacity levels
* @bat_type table of supported battery types
* @chg_params charger parameters
@@ -257,6 +271,7 @@ struct abx500_bm_data {
bool autopower_cfg;
bool ac_enabled;
bool usb_enabled;
+ bool usb_power_path;
bool no_maintenance;
bool capacity_scaling;
bool chg_unknown_bat;
@@ -270,6 +285,10 @@ struct abx500_bm_data {
int interval_not_charging;
int temp_hysteresis;
int gnd_lift_resistance;
+ int n_chg_out_curr;
+ int n_chg_in_curr;
+ int *chg_output_curr;
+ int *chg_input_curr;
const struct abx500_maxim_parameters *maxi;
const struct abx500_bm_capacity_levels *cap_levels;
struct abx500_battery_type *bat_type;
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 8d35bfe164c..cc892a8d8d6 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -23,6 +23,7 @@
* Bank : 0x5
*/
#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_LINE_CTRL2_REG 0x82
#define AB8500_USB_LINK1_STAT_REG 0x94
/*
@@ -33,7 +34,7 @@
#define AB8500_CH_STATUS2_REG 0x01
#define AB8500_CH_USBCH_STAT1_REG 0x02
#define AB8500_CH_USBCH_STAT2_REG 0x03
-#define AB8500_CH_FSM_STAT_REG 0x04
+#define AB8540_CH_USBCH_STAT3_REG 0x04
#define AB8500_CH_STAT_REG 0x05
/*
@@ -69,6 +70,8 @@
#define AB8500_USBCH_CTRL1_REG 0xC0
#define AB8500_USBCH_CTRL2_REG 0xC1
#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2
+#define AB8540_USB_PP_MODE_REG 0xC5
+#define AB8540_USB_PP_CHR_REG 0xC6
/*
* Gas Gauge register offsets
@@ -105,6 +108,7 @@
#define AB8500_RTC_BACKUP_CHG_REG 0x0C
#define AB8500_RTC_CC_CONF_REG 0x01
#define AB8500_RTC_CTRL_REG 0x0B
+#define AB8500_RTC_CTRL1_REG 0x11
/*
* OTP register offsets
@@ -154,6 +158,7 @@
#define CH_OP_CUR_LVL_1P4 0x0D
#define CH_OP_CUR_LVL_1P5 0x0E
#define CH_OP_CUR_LVL_1P6 0x0F
+#define CH_OP_CUR_LVL_2P 0x3F
/* BTEMP High thermal limits */
#define BTEMP_HIGH_TH_57_0 0x00
@@ -179,10 +184,25 @@
#define BUP_ICH_SEL_300UA 0x08
#define BUP_ICH_SEL_700UA 0x0C
-#define BUP_VCH_SEL_2P5V 0x00
-#define BUP_VCH_SEL_2P6V 0x01
-#define BUP_VCH_SEL_2P8V 0x02
-#define BUP_VCH_SEL_3P1V 0x03
+enum bup_vch_sel {
+ BUP_VCH_SEL_2P5V,
+ BUP_VCH_SEL_2P6V,
+ BUP_VCH_SEL_2P8V,
+ BUP_VCH_SEL_3P1V,
+ /*
+ * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
+ * are only available on ab8540. You can't choose these 5
+ * voltage on ab8500/ab8505/ab9540.
+ */
+ BUP_VCH_SEL_2P7V,
+ BUP_VCH_SEL_2P9V,
+ BUP_VCH_SEL_3P0V,
+ BUP_VCH_SEL_3P2V,
+ BUP_VCH_SEL_3P3V,
+};
+
+#define BUP_VCH_RANGE 0x02
+#define VBUP33_VRTCN 0x01
/* Battery OVV constants */
#define BATT_OVV_ENA 0x02
@@ -228,6 +248,8 @@
#define BAT_CTRL_20U_ENA 0x02
#define BAT_CTRL_18U_ENA 0x01
#define BAT_CTRL_16U_ENA 0x02
+#define BAT_CTRL_60U_ENA 0x01
+#define BAT_CTRL_120U_ENA 0x02
#define BAT_CTRL_CMP_ENA 0x04
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
#define BAT_CTRL_PULL_UP_ENA 0x10
@@ -235,6 +257,24 @@
/* Battery type */
#define BATTERY_UNKNOWN 00
+/* Registers for pcut feature in ab8505 and ab9540 */
+#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12
+#define AB8505_RTC_PCUT_TIME_REG 0x13
+#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14
+#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15
+#define AB8505_RTC_PCUT_RESTART_REG 0x16
+#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17
+
+/* USB Power Path constants for ab8540 */
+#define BUS_VSYS_VOL_SELECT_MASK 0x06
+#define BUS_VSYS_VOL_SELECT_3P6V 0x00
+#define BUS_VSYS_VOL_SELECT_3P325V 0x02
+#define BUS_VSYS_VOL_SELECT_3P9V 0x04
+#define BUS_VSYS_VOL_SELECT_4P3V 0x06
+#define BUS_POWER_PATH_MODE_ENA 0x01
+#define BUS_PP_PRECHG_CURRENT_MASK 0x0E
+#define BUS_POWER_PATH_PRECHG_ENA 0x01
+
/**
* struct res_to_temp - defines one point in a temp to res curve. To
* be used in battery packs that combines the identification resistor with a
@@ -283,6 +323,11 @@ struct ab8500_fg;
* points.
* @maint_thres This is the threshold where we stop reporting
* battery full while in maintenance, in per cent
+ * @pcut_enable: Enable power cut feature in ab8505
+ * @pcut_max_time: Max time threshold
+ * @pcut_flag_time: Flagtime threshold
+ * @pcut_max_restart: Max number of restarts
+ * @pcut_debunce_time: Sets battery debounce time
*/
struct ab8500_fg_parameters {
int recovery_sleep_timer;
@@ -299,6 +344,11 @@ struct ab8500_fg_parameters {
int battok_raising_th_sel1;
int user_cap_limit;
int maint_thres;
+ bool pcut_enable;
+ u8 pcut_max_time;
+ u8 pcut_flag_time;
+ u8 pcut_max_restart;
+ u8 pcut_debunce_time;
};
/**
@@ -415,6 +465,7 @@ void ab8500_fg_reinit(void);
void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
struct ab8500_btemp *ab8500_btemp_get(void);
int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
+int ab8500_btemp_get_temp(struct ab8500_btemp *btemp);
struct ab8500_fg *ab8500_fg_get(void);
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
index 252966769d9..49ded001049 100644
--- a/include/linux/mfd/abx500/ab8500-gpadc.h
+++ b/include/linux/mfd/abx500/ab8500-gpadc.h
@@ -4,32 +4,72 @@
*
* Author: Arun R Murthy <arun.murthy@stericsson.com>
* Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
*/
#ifndef _AB8500_GPADC_H
#define _AB8500_GPADC_H
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
-#define BAT_CTRL 0x01
-#define BTEMP_BALL 0x02
-#define MAIN_CHARGER_V 0x03
-#define ACC_DETECT1 0x04
-#define ACC_DETECT2 0x05
-#define ADC_AUX1 0x06
-#define ADC_AUX2 0x07
-#define MAIN_BAT_V 0x08
-#define VBUS_V 0x09
-#define MAIN_CHARGER_C 0x0A
-#define USB_CHARGER_C 0x0B
-#define BK_BAT_V 0x0C
-#define DIE_TEMP 0x0D
+/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
+ * and ADCHwSel[4:0] in GPADCCtrl3 ) */
+#define BAT_CTRL 0x01
+#define BTEMP_BALL 0x02
+#define MAIN_CHARGER_V 0x03
+#define ACC_DETECT1 0x04
+#define ACC_DETECT2 0x05
+#define ADC_AUX1 0x06
+#define ADC_AUX2 0x07
+#define MAIN_BAT_V 0x08
+#define VBUS_V 0x09
+#define MAIN_CHARGER_C 0x0A
+#define USB_CHARGER_C 0x0B
+#define BK_BAT_V 0x0C
+#define DIE_TEMP 0x0D
+#define USB_ID 0x0E
+#define XTAL_TEMP 0x12
+#define VBAT_TRUE_MEAS 0x13
+#define BAT_CTRL_AND_IBAT 0x1C
+#define VBAT_MEAS_AND_IBAT 0x1D
+#define VBAT_TRUE_MEAS_AND_IBAT 0x1E
+#define BAT_TEMP_AND_IBAT 0x1F
+
+/* Virtual channel used only for ibat convertion to ampere
+ * Battery current conversion (ibat) cannot be requested as a single conversion
+ * but it is always in combination with other input requests
+ */
+#define IBAT_VIRTUAL_CHANNEL 0xFF
+
+#define SAMPLE_1 1
+#define SAMPLE_4 4
+#define SAMPLE_8 8
+#define SAMPLE_16 16
+#define RISING_EDGE 0
+#define FALLING_EDGE 1
+
+/* Arbitrary ADC conversion type constants */
+#define ADC_SW 0
+#define ADC_HW 1
struct ab8500_gpadc;
struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ return ab8500_gpadc_sw_hw_convert(gpadc, channel,
+ SAMPLE_16, 0, 0, ADC_SW);
+}
+
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+ int *ibat);
int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
- u8 channel, int ad_value);
+ u8 channel, int ad_value);
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+ u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+ u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h);
#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index ebf12e793db..990bc93f46e 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -12,6 +12,7 @@
int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
+void ab8500_restart(char mode, const char *cmd);
#else
@@ -40,6 +41,7 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
struct ab8500_sysctrl_platform_data {
u8 initial_req_buf_config[8];
+ u16 (*reboot_reason_code)(const char *cmd);
};
/* Registers */
@@ -299,4 +301,8 @@ struct ab8500_sysctrl_platform_data {
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+#define AB8500_ENABLE_WD 0x1
+#define AB8500_KICK_WD 0x2
+#define AB8500_WD_RESTART_ON_EXPIRE 0x10
+
#endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 84f449475c2..fb1bf7d6a41 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -362,6 +362,7 @@ struct ab8500 {
u8 *oldmask;
int mask_size;
const int *irq_reg_offset;
+ int it_latchhier_num;
};
struct ab8500_regulator_platform_data;
@@ -505,6 +506,8 @@ static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
}
+void ab8500_override_turn_on_stat(u8 mask, u8 set);
+
#ifdef CONFIG_AB8500_DEBUG
void ab8500_dump_all_banks(struct device *dev);
void ab8500_debug_register_interrupt(int line);
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
index d43ac0f3552..234c99143bf 100644
--- a/include/linux/mfd/abx500/ux500_chargalg.h
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -17,8 +17,11 @@ struct ux500_charger;
struct ux500_charger_ops {
int (*enable) (struct ux500_charger *, int, int, int);
+ int (*check_enable) (struct ux500_charger *, int, int);
int (*kick_wd) (struct ux500_charger *);
int (*update_curr) (struct ux500_charger *, int);
+ int (*pp_enable) (struct ux500_charger *, bool);
+ int (*pre_chg_enable) (struct ux500_charger *, bool);
};
/**
@@ -29,6 +32,7 @@ struct ux500_charger_ops {
* @max_out_curr maximum output charger current in mA
* @enabled indicates if this charger is used or not
* @external external charger unit (pm2xxx)
+ * @power_path USB power path support
*/
struct ux500_charger {
struct power_supply psy;
@@ -38,6 +42,9 @@ struct ux500_charger {
int wdt_refresh;
bool enabled;
bool external;
+ bool power_path;
};
+extern struct blocking_notifier_head charger_notifier_list;
+
#endif
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 6694cf43e8b..998628a2b08 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -86,6 +86,11 @@ struct tps65090_regulator_plat_data {
struct tps65090_platform_data {
int irq_base;
+
+ char **supplied_to;
+ size_t num_supplicants;
+ int enable_low_current_chrg;
+
struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX];
};
diff --git a/include/linux/pm2301_charger.h b/include/linux/pm2301_charger.h
index fc3f026922a..85c16defe11 100644
--- a/include/linux/pm2301_charger.h
+++ b/include/linux/pm2301_charger.h
@@ -48,7 +48,7 @@ struct pm2xxx_charger_platform_data {
size_t num_supplicants;
int i2c_bus;
const char *label;
- int irq_number;
+ int gpio_irq_number;
unsigned int lpn_gpio;
int irq_type;
};
diff --git a/include/linux/power/ab8500.h b/include/linux/power/ab8500.h
new file mode 100644
index 00000000000..cdbb6c2a8c5
--- /dev/null
+++ b/include/linux/power/ab8500.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) ST-Ericsson 2013
+ * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
+ * License terms: GNU General Public License v2
+ */
+
+#ifndef PWR_AB8500_H
+#define PWR_AB8500_H
+
+extern const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[];
+extern const int ab8500_temp_tbl_a_size;
+
+extern const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[];
+extern const int ab8500_temp_tbl_b_size;
+
+#endif /* PWR_AB8500_H */
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 002a99f9633..3828cefb4f6 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -171,6 +171,12 @@ struct power_supply {
char **supplied_to;
size_t num_supplicants;
+ char **supplied_from;
+ size_t num_supplies;
+#ifdef CONFIG_OF
+ struct device_node *of_node;
+#endif
+
int (*get_property)(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val);
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 75818744ab5..ea7168a6808 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -115,9 +115,6 @@ unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
void vexpress_sysreg_early_init(void __iomem *base);
void vexpress_sysreg_of_early_init(void);
-void vexpress_power_off(void);
-void vexpress_restart(char str, const char *cmd);
-
/* Clocks */
struct clk *vexpress_osc_setup(struct device *dev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 11:48:48 +0000