diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ieee80211.h | 32 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 41 |
2 files changed, 55 insertions, 18 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 210e2c32553..db84e2f6b28 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -640,9 +640,9 @@ struct ieee80211_rann_ie { u8 rann_hopcount; u8 rann_ttl; u8 rann_addr[6]; - u32 rann_seq; - u32 rann_interval; - u32 rann_metric; + __le32 rann_seq; + __le32 rann_interval; + __le32 rann_metric; } __attribute__ ((packed)); enum ieee80211_rann_flags { @@ -1007,13 +1007,13 @@ enum ieee80211_min_mpdu_spacing { }; /** - * struct ieee80211_ht_info - HT information + * struct ieee80211_ht_operation - HT operation IE * - * This structure is the "HT information element" as - * described in 802.11n D5.0 7.3.2.58 + * This structure is the "HT operation element" as + * described in 802.11n-2009 7.3.2.57 */ -struct ieee80211_ht_info { - u8 control_chan; +struct ieee80211_ht_operation { + u8 primary_chan; u8 ht_param; __le16 operation_mode; __le16 stbc_param; @@ -1027,8 +1027,6 @@ struct ieee80211_ht_info { #define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 #define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 #define IEEE80211_HT_PARAM_RIFS_MODE 0x08 -#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 -#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 /* for operation_mode */ #define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 @@ -1301,7 +1299,7 @@ enum ieee80211_eid { WLAN_EID_EXT_SUPP_RATES = 50, WLAN_EID_HT_CAPABILITY = 45, - WLAN_EID_HT_INFORMATION = 61, + WLAN_EID_HT_OPERATION = 61, WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, @@ -1441,6 +1439,18 @@ enum ieee80211_tdls_actioncode { #define WLAN_TDLS_SNAP_RFTYPE 0x2 /** + * enum - mesh synchronization method identifier + * + * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method + * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method + * that will be specified in a vendor specific information element + */ +enum { + IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, + IEEE80211_SYNC_METHOD_VENDOR = 255, +}; + +/** * enum - mesh path selection protocol identifier * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e474f6e780c..1335084b1c6 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -548,6 +548,11 @@ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether * No Acknowledgement Policy should be applied. * + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -689,6 +694,8 @@ enum nl80211_commands { NL80211_CMD_SET_NOACK_MAP, + NL80211_CMD_CH_SWITCH_NOTIFY, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1685,6 +1692,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1708,6 +1716,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2142,6 +2151,9 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors + * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2166,6 +2178,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, NL80211_MESHCONF_FORWARDING, NL80211_MESHCONF_RSSI_THRESHOLD, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2205,6 +2218,11 @@ enum nl80211_meshconf_params { * complete (unsecured) mesh peering without the need of a userspace daemon. * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ enum nl80211_mesh_setup_params { @@ -2214,6 +2232,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_IE, NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, + NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2223,7 +2242,7 @@ enum nl80211_mesh_setup_params { /** * enum nl80211_txq_attr - TX queue parameter attributes * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved - * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning * disabled * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form @@ -2236,7 +2255,7 @@ enum nl80211_mesh_setup_params { */ enum nl80211_txq_attr { __NL80211_TXQ_ATTR_INVALID, - NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_AC, NL80211_TXQ_ATTR_TXOP, NL80211_TXQ_ATTR_CWMIN, NL80211_TXQ_ATTR_CWMAX, @@ -2247,13 +2266,21 @@ enum nl80211_txq_attr { NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 }; -enum nl80211_txq_q { - NL80211_TXQ_Q_VO, - NL80211_TXQ_Q_VI, - NL80211_TXQ_Q_BE, - NL80211_TXQ_Q_BK +enum nl80211_ac { + NL80211_AC_VO, + NL80211_AC_VI, + NL80211_AC_BE, + NL80211_AC_BK, + NL80211_NUM_ACS }; +/* backward compat */ +#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC +#define NL80211_TXQ_Q_VO NL80211_AC_VO +#define NL80211_TXQ_Q_VI NL80211_AC_VI +#define NL80211_TXQ_Q_BE NL80211_AC_BE +#define NL80211_TXQ_Q_BK NL80211_AC_BK + enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, |