summaryrefslogtreecommitdiffstats
path: root/include/media/rc-core.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/media/rc-core.h')
-rw-r--r--include/media/rc-core.h220
1 files changed, 220 insertions, 0 deletions
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
new file mode 100644
index 00000000000..a23c1fc685a
--- /dev/null
+++ b/include/media/rc-core.h
@@ -0,0 +1,220 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _RC_CORE
+#define _RC_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+
+enum rc_driver_type {
+ RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
+ RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_map: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ * scancode to the application. As this is a hardware limit, we can't do
+ * anything with it. Yet, as the same keycode table can be used with other
+ * devices, a mask is provided to allow its usage. Drivers should generally
+ * leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ * is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ * is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+ struct device dev;
+ const char *input_name;
+ const char *input_phys;
+ struct input_id input_id;
+ char *driver_name;
+ const char *map_name;
+ struct rc_map rc_map;
+ unsigned long devno;
+ struct ir_raw_event_ctrl *raw;
+ struct input_dev *input_dev;
+ enum rc_driver_type driver_type;
+ bool idle;
+ u64 allowed_protos;
+ u32 scanmask;
+ void *priv;
+ spinlock_t keylock;
+ bool keypressed;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ u32 last_keycode;
+ u32 last_scancode;
+ u8 last_toggle;
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
+ int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+ int (*open)(struct rc_dev *dev);
+ void (*close)(struct rc_dev *dev);
+ int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
+ int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+ int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+ int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+ int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+ void (*s_idle)(struct rc_dev *dev, bool enable);
+ int (*s_learning_mode)(struct rc_dev *dev, int enable);
+ int (*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+/*
+ * From rc-main.c
+ * Those functions can be used on any type of Remote Controller. They
+ * basically creates an input_dev and properly reports the device as a
+ * Remote Controller, at sys/class/rc.
+ */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void rc_repeat(struct rc_dev *dev);
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keyup(struct rc_dev *dev);
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/*
+ * From rc-raw.c
+ * The Raw interface is specific to InfraRed. It may be a good idea to
+ * split it later into a separate header.
+ */
+
+enum raw_event_type {
+ IR_SPACE = (1 << 0),
+ IR_PULSE = (1 << 1),
+ IR_START_EVENT = (1 << 2),
+ IR_STOP_EVENT = (1 << 3),
+};
+
+struct ir_raw_event {
+ union {
+ u32 duration;
+
+ struct {
+ u32 carrier;
+ u8 duty_cycle;
+ };
+ };
+
+ unsigned pulse:1;
+ unsigned reset:1;
+ unsigned timeout:1;
+ unsigned carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+ struct ir_raw_event event = { \
+ { .duration = 0 } , \
+ .pulse = 0, \
+ .reset = 0, \
+ .timeout = 0, \
+ .carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+ memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+ struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+ DEFINE_IR_RAW_EVENT(ev);
+ ev.reset = true;
+
+ ir_raw_event_store(dev, &ev);
+ ir_raw_event_handle(dev);
+}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+ u32 vbit = 1, value = 0;
+
+ do {
+ if (mask & 1) {
+ if (data & 1)
+ value |= vbit;
+ vbit <<= 1;
+ }
+ data >>= 1;
+ } while (mask >>= 1);
+
+ return value;
+}
+
+#endif /* _RC_CORE */