summaryrefslogtreecommitdiffstats
path: root/include/media/s3c_fimc.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/media/s3c_fimc.h')
-rw-r--r--include/media/s3c_fimc.h60
1 files changed, 60 insertions, 0 deletions
diff --git a/include/media/s3c_fimc.h b/include/media/s3c_fimc.h
new file mode 100644
index 00000000000..ca1b6738e4a
--- /dev/null
+++ b/include/media/s3c_fimc.h
@@ -0,0 +1,60 @@
+/*
+ * Samsung S5P SoC camera interface driver header
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S3C_FIMC_H_
+#define S3C_FIMC_H_
+
+enum cam_bus_type {
+ FIMC_ITU_601 = 1,
+ FIMC_ITU_656,
+ FIMC_MIPI_CSI2,
+ FIMC_LCD_WB, /* FIFO link from LCD mixer */
+};
+
+#define FIMC_CLK_INV_PCLK (1 << 0)
+#define FIMC_CLK_INV_VSYNC (1 << 1)
+#define FIMC_CLK_INV_HREF (1 << 2)
+#define FIMC_CLK_INV_HSYNC (1 << 3)
+
+struct i2c_board_info;
+
+/**
+ * struct s3c_fimc_isp_info - image sensor information required for host
+ * interace configuration.
+ *
+ * @board_info: pointer to I2C subdevice's board info
+ * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ * @bus_width: camera data bus width in bits
+ * @flags: flags defining bus signals polarity inversion (High by default)
+ */
+struct s3c_fimc_isp_info {
+ struct i2c_board_info *board_info;
+ enum cam_bus_type bus_type;
+ u16 i2c_bus_num;
+ u16 mux_id;
+ u16 bus_width;
+ u16 flags;
+};
+
+
+#define FIMC_MAX_CAMIF_CLIENTS 2
+
+/**
+ * struct s3c_platform_fimc - camera host interface platform data
+ *
+ * @isp_info: properties of camera sensor required for host interface setup
+ */
+struct s3c_platform_fimc {
+ struct s3c_fimc_isp_info *isp_info[FIMC_MAX_CAMIF_CLIENTS];
+};
+#endif /* S3C_FIMC_H_ */