summaryrefslogtreecommitdiffstats
path: root/include/media/v4l2-subdev.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/media/v4l2-subdev.h')
-rw-r--r--include/media/v4l2-subdev.h56
1 files changed, 53 insertions, 3 deletions
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index c35a3545e27..b137a5e1151 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -21,6 +21,7 @@
#ifndef _V4L2_SUBDEV_H
#define _V4L2_SUBDEV_H
+#include <linux/types.h>
#include <linux/v4l2-subdev.h>
#include <media/media-entity.h>
#include <media/v4l2-common.h>
@@ -45,6 +46,7 @@ struct v4l2_fh;
struct v4l2_subdev;
struct v4l2_subdev_fh;
struct tuner_setup;
+struct v4l2_mbus_frame_desc;
/* decode_vbi_line */
struct v4l2_decode_vbi_line {
@@ -120,7 +122,7 @@ struct v4l2_subdev_io_pin_config {
each pin being configured. This function could be called at times
other than just subdevice initialization.
- init: initialize the sensor registors to some sort of reasonable default
+ init: initialize the sensor registers to some sort of reasonable default
values. Do not use for new drivers and should be removed in existing
drivers.
@@ -194,7 +196,7 @@ struct v4l2_subdev_tuner_ops {
int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
- int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
+ int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm);
int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
};
@@ -226,6 +228,36 @@ struct v4l2_subdev_audio_ops {
int (*s_stream)(struct v4l2_subdev *sd, int enable);
};
+/* Indicates the @length field specifies maximum data length. */
+#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX (1U << 0)
+/* Indicates user defined data format, i.e. non standard frame format. */
+#define V4L2_MBUS_FRAME_DESC_FL_BLOB (1U << 1)
+
+/**
+ * struct v4l2_mbus_frame_desc_entry - media bus frame description structure
+ * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
+ * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
+ * @length: number of octets per frame, valid for compressed or unspecified
+ * formats
+ */
+struct v4l2_mbus_frame_desc_entry {
+ u16 flags;
+ u32 pixelcode;
+ u32 length;
+};
+
+#define V4L2_FRAME_DESC_ENTRY_MAX 4
+
+/**
+ * struct v4l2_mbus_frame_desc - media bus data frame description
+ * @entry: frame descriptors array
+ * @num_entries: number of entries in @entry array
+ */
+struct v4l2_mbus_frame_desc {
+ struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
+ unsigned short num_entries;
+};
+
/*
s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
video input devices.
@@ -274,6 +306,10 @@ struct v4l2_subdev_audio_ops {
s_mbus_config: set a certain mediabus configuration. This operation is added
for compatibility with soc-camera drivers and should not be used by new
software.
+
+ s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
+ can adjust @size to a lower value and must not write more data to the
+ buffer starting at @data than the original value of @size.
*/
struct v4l2_subdev_video_ops {
int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
@@ -286,7 +322,7 @@ struct v4l2_subdev_video_ops {
int (*s_stream)(struct v4l2_subdev *sd, int enable);
int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
- int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
+ int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop);
int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
int (*g_frame_interval)(struct v4l2_subdev *sd,
@@ -327,6 +363,8 @@ struct v4l2_subdev_video_ops {
struct v4l2_mbus_config *cfg);
int (*s_mbus_config)(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg);
+ int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
+ unsigned int *size);
};
/*
@@ -455,6 +493,12 @@ struct v4l2_subdev_ir_ops {
struct v4l2_subdev_ir_parameters *params);
};
+/**
+ * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
+ * @get_frame_desc: get the current low level media bus frame parameters.
+ * @get_frame_desc: set the low level media bus frame parameters, @fd array
+ * may be adjusted by the subdev driver to device capabilities.
+ */
struct v4l2_subdev_pad_ops {
int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct v4l2_subdev_mbus_code_enum *code);
@@ -476,11 +520,17 @@ struct v4l2_subdev_pad_ops {
struct v4l2_subdev_selection *sel);
int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct v4l2_subdev_selection *sel);
+ int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
+ int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
#ifdef CONFIG_MEDIA_CONTROLLER
int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link,
struct v4l2_subdev_format *source_fmt,
struct v4l2_subdev_format *sink_fmt);
#endif /* CONFIG_MEDIA_CONTROLLER */
+ int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd);
+ int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd);
};
struct v4l2_subdev_ops {