summaryrefslogtreecommitdiffstats
path: root/include/media
diff options
context:
space:
mode:
Diffstat (limited to 'include/media')
-rw-r--r--include/media/m5mols.h4
-rw-r--r--include/media/mt9p031.h19
-rw-r--r--include/media/mt9t001.h8
-rw-r--r--include/media/omap3isp.h140
-rw-r--r--include/media/ov772x.h26
-rw-r--r--include/media/rc-core.h7
-rw-r--r--include/media/rc-map.h3
-rw-r--r--include/media/s5k6aa.h51
-rw-r--r--include/media/s5p_fimc.h18
-rw-r--r--include/media/saa7146.h36
-rw-r--r--include/media/soc_camera.h104
-rw-r--r--include/media/soc_camera_platform.h4
-rw-r--r--include/media/soc_mediabus.h2
-rw-r--r--include/media/v4l2-chip-ident.h3
-rw-r--r--include/media/v4l2-ctrls.h15
-rw-r--r--include/media/v4l2-ioctl.h2
-rw-r--r--include/media/v4l2-mediabus.h12
-rw-r--r--include/media/v4l2-subdev.h5
-rw-r--r--include/media/videobuf2-core.h71
-rw-r--r--include/media/videobuf2-dma-contig.h6
20 files changed, 380 insertions, 156 deletions
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index aac2c0e06d5..4a825ae5c6c 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -18,15 +18,13 @@
/**
* struct m5mols_platform_data - platform data for M-5MOLS driver
- * @irq: GPIO getting the irq pin of M-5MOLS
* @gpio_reset: GPIO driving the reset pin of M-5MOLS
- * @reset_polarity: active state for gpio_rst pin, 0 or 1
+ * @reset_polarity: active state for gpio_reset pin, 0 or 1
* @set_power: an additional callback to the board setup code
* to be called after enabling and before disabling
* the sensor's supply regulators
*/
struct m5mols_platform_data {
- int irq;
int gpio_reset;
u8 reset_polarity;
int (*set_power)(struct device *dev, int on);
diff --git a/include/media/mt9p031.h b/include/media/mt9p031.h
new file mode 100644
index 00000000000..96448c7a318
--- /dev/null
+++ b/include/media/mt9p031.h
@@ -0,0 +1,19 @@
+#ifndef MT9P031_H
+#define MT9P031_H
+
+struct v4l2_subdev;
+
+enum {
+ MT9P031_COLOR_VERSION,
+ MT9P031_MONOCHROME_VERSION,
+};
+
+struct mt9p031_platform_data {
+ int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
+ int (*reset)(struct v4l2_subdev *subdev, int active);
+ int ext_freq; /* input frequency to the mt9p031 for PLL dividers */
+ int target_freq; /* frequency target for the PLL */
+ int version; /* MT9P031_COLOR_VERSION or MT9P031_MONOCHROME_VERSION */
+};
+
+#endif
diff --git a/include/media/mt9t001.h b/include/media/mt9t001.h
new file mode 100644
index 00000000000..e839a78bb9c
--- /dev/null
+++ b/include/media/mt9t001.h
@@ -0,0 +1,8 @@
+#ifndef _MEDIA_MT9T001_H
+#define _MEDIA_MT9T001_H
+
+struct mt9t001_platform_data {
+ unsigned int clk_pol:1;
+};
+
+#endif
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
new file mode 100644
index 00000000000..e917b1da657
--- /dev/null
+++ b/include/media/omap3isp.h
@@ -0,0 +1,140 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - Platform data
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __MEDIA_OMAP3ISP_H__
+#define __MEDIA_OMAP3ISP_H__
+
+struct i2c_board_info;
+struct isp_device;
+
+enum isp_interface_type {
+ ISP_INTERFACE_PARALLEL,
+ ISP_INTERFACE_CSI2A_PHY2,
+ ISP_INTERFACE_CCP2B_PHY1,
+ ISP_INTERFACE_CCP2B_PHY2,
+ ISP_INTERFACE_CSI2C_PHY1,
+};
+
+enum {
+ ISP_BRIDGE_DISABLE = 0,
+ ISP_BRIDGE_LITTLE_ENDIAN = 2,
+ ISP_BRIDGE_BIG_ENDIAN = 3,
+};
+
+enum {
+ ISP_LANE_SHIFT_0 = 0,
+ ISP_LANE_SHIFT_2 = 1,
+ ISP_LANE_SHIFT_4 = 2,
+ ISP_LANE_SHIFT_6 = 3,
+};
+
+/**
+ * struct isp_parallel_platform_data - Parallel interface platform data
+ * @data_lane_shift: Data lane shifter
+ * ISP_LANE_SHIFT_0 - CAMEXT[13:0] -> CAM[13:0]
+ * ISP_LANE_SHIFT_2 - CAMEXT[13:2] -> CAM[11:0]
+ * ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0]
+ * ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0]
+ * @clk_pol: Pixel clock polarity
+ * 0 - Non Inverted, 1 - Inverted
+ * @hs_pol: Horizontal synchronization polarity
+ * 0 - Active high, 1 - Active low
+ * @vs_pol: Vertical synchronization polarity
+ * 0 - Active high, 1 - Active low
+ * @bridge: CCDC Bridge input control
+ * ISP_BRIDGE_DISABLE - Disable
+ * ISP_BRIDGE_LITTLE_ENDIAN - Little endian
+ * ISP_BRIDGE_BIG_ENDIAN - Big endian
+ */
+struct isp_parallel_platform_data {
+ unsigned int data_lane_shift:2;
+ unsigned int clk_pol:1;
+ unsigned int hs_pol:1;
+ unsigned int vs_pol:1;
+ unsigned int bridge:2;
+};
+
+enum {
+ ISP_CCP2_PHY_DATA_CLOCK = 0,
+ ISP_CCP2_PHY_DATA_STROBE = 1,
+};
+
+enum {
+ ISP_CCP2_MODE_MIPI = 0,
+ ISP_CCP2_MODE_CCP2 = 1,
+};
+
+/**
+ * struct isp_ccp2_platform_data - CCP2 interface platform data
+ * @strobe_clk_pol: Strobe/clock polarity
+ * 0 - Non Inverted, 1 - Inverted
+ * @crc: Enable the cyclic redundancy check
+ * @ccp2_mode: Enable CCP2 compatibility mode
+ * ISP_CCP2_MODE_MIPI - MIPI-CSI1 mode
+ * ISP_CCP2_MODE_CCP2 - CCP2 mode
+ * @phy_layer: Physical layer selection
+ * ISP_CCP2_PHY_DATA_CLOCK - Data/clock physical layer
+ * ISP_CCP2_PHY_DATA_STROBE - Data/strobe physical layer
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_ccp2_platform_data {
+ unsigned int strobe_clk_pol:1;
+ unsigned int crc:1;
+ unsigned int ccp2_mode:1;
+ unsigned int phy_layer:1;
+ unsigned int vpclk_div:2;
+};
+
+/**
+ * struct isp_csi2_platform_data - CSI2 interface platform data
+ * @crc: Enable the cyclic redundancy check
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_csi2_platform_data {
+ unsigned crc:1;
+ unsigned vpclk_div:2;
+};
+
+struct isp_subdev_i2c_board_info {
+ struct i2c_board_info *board_info;
+ int i2c_adapter_id;
+};
+
+struct isp_v4l2_subdevs_group {
+ struct isp_subdev_i2c_board_info *subdevs;
+ enum isp_interface_type interface;
+ union {
+ struct isp_parallel_platform_data parallel;
+ struct isp_ccp2_platform_data ccp2;
+ struct isp_csi2_platform_data csi2;
+ } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
+};
+
+struct isp_platform_data {
+ struct isp_v4l2_subdevs_group *subdevs;
+ void (*set_constraints)(struct isp_device *isp, bool enable);
+};
+
+#endif /* __MEDIA_OMAP3ISP_H__ */
diff --git a/include/media/ov772x.h b/include/media/ov772x.h
index 548bf1155c8..00dbb7c4fea 100644
--- a/include/media/ov772x.h
+++ b/include/media/ov772x.h
@@ -12,12 +12,9 @@
#ifndef __OV772X_H__
#define __OV772X_H__
-#include <media/soc_camera.h>
-
/* for flags */
#define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */
#define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */
-#define OV772X_FLAG_8BIT (1 << 2) /* default 10 bit */
/*
* for Edge ctrl
@@ -32,22 +29,23 @@ struct ov772x_edge_ctrl {
unsigned char lower;
};
-#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */
-#define EDGE_STRENGTH_MASK 0x1F
-#define EDGE_THRESHOLD_MASK 0x0F
-#define EDGE_UPPER_MASK 0xFF
-#define EDGE_LOWER_MASK 0xFF
+#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */
+#define OV772X_EDGE_STRENGTH_MASK 0x1F
+#define OV772X_EDGE_THRESHOLD_MASK 0x0F
+#define OV772X_EDGE_UPPER_MASK 0xFF
+#define OV772X_EDGE_LOWER_MASK 0xFF
#define OV772X_AUTO_EDGECTRL(u, l) \
{ \
- .upper = (u & EDGE_UPPER_MASK), \
- .lower = (l & EDGE_LOWER_MASK), \
+ .upper = (u & OV772X_EDGE_UPPER_MASK), \
+ .lower = (l & OV772X_EDGE_LOWER_MASK), \
}
-#define OV772X_MANUAL_EDGECTRL(s, t) \
-{ \
- .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\
- .threshold = (t & EDGE_THRESHOLD_MASK), \
+#define OV772X_MANUAL_EDGECTRL(s, t) \
+{ \
+ .strength = (s & OV772X_EDGE_STRENGTH_MASK) | \
+ OV772X_MANUAL_EDGE_CTRL, \
+ .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \
}
/*
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index b1f19b77ecd..b0c494a6907 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -23,8 +23,11 @@
#include <media/rc-map.h>
extern int rc_core_debug;
-#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+#define IR_dprintk(level, fmt, ...) \
+do { \
+ if (rc_core_debug >= level) \
+ pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
enum rc_driver_type {
RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 17c9759ae77..26a3bd0fe57 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -61,6 +61,7 @@ void rc_map_init(void);
#define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp"
#define RC_MAP_ASUS_PC39 "rc-asus-pc39"
#define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600"
+#define RC_MAP_ATI_X10 "rc-ati-x10"
#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d"
#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus"
#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt"
@@ -106,6 +107,7 @@ void rc_map_init(void);
#define RC_MAP_LIRC "rc-lirc"
#define RC_MAP_LME2510 "rc-lme2510"
#define RC_MAP_MANLI "rc-manli"
+#define RC_MAP_MEDION_X10 "rc-medion-x10"
#define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii"
#define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii"
#define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus"
@@ -130,6 +132,7 @@ void rc_map_init(void);
#define RC_MAP_RC5_TV "rc-rc5-tv"
#define RC_MAP_RC6_MCE "rc-rc6-mce"
#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys"
+#define RC_MAP_SNAPSTREAM_FIREFLY "rc-snapstream-firefly"
#define RC_MAP_STREAMZAP "rc-streamzap"
#define RC_MAP_TBS_NEC "rc-tbs-nec"
#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2"
diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h
new file mode 100644
index 00000000000..ba34f7055e5
--- /dev/null
+++ b/include/media/s5k6aa.h
@@ -0,0 +1,51 @@
+/*
+ * S5K6AAFX camera sensor driver header
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5K6AA_H
+#define S5K6AA_H
+
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5k6aa_gpio - data structure describing a GPIO
+ * @gpio: GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k6aa_gpio {
+ int gpio;
+ int level;
+};
+
+/**
+ * struct s5k6aa_platform_data - s5k6aa driver platform data
+ * @set_power: an additional callback to the board code, called
+ * after enabling the regulators and before switching
+ * the sensor off
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset: GPIO driving RESET pin
+ * @gpio_stby: GPIO driving STBY pin
+ * @nlanes: maximum number of MIPI-CSI lanes used
+ * @horiz_flip: default horizontal image flip value, non zero to enable
+ * @vert_flip: default vertical image flip value, non zero to enable
+ */
+
+struct s5k6aa_platform_data {
+ int (*set_power)(int enable);
+ unsigned long mclk_frequency;
+ struct s5k6aa_gpio gpio_reset;
+ struct s5k6aa_gpio gpio_stby;
+ enum v4l2_mbus_type bus_type;
+ u8 nlanes;
+ u8 horiz_flip;
+ u8 vert_flip;
+};
+
+#endif /* S5K6AA_H */
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
index 9fdff8a4ed2..688fb3f1dc3 100644
--- a/include/media/s5p_fimc.h
+++ b/include/media/s5p_fimc.h
@@ -19,11 +19,6 @@ enum cam_bus_type {
FIMC_LCD_WB, /* FIFO link from LCD mixer */
};
-#define FIMC_CLK_INV_PCLK (1 << 0)
-#define FIMC_CLK_INV_VSYNC (1 << 1)
-#define FIMC_CLK_INV_HREF (1 << 2)
-#define FIMC_CLK_INV_HSYNC (1 << 3)
-
struct i2c_board_info;
/**
@@ -36,7 +31,8 @@ struct i2c_board_info;
* @csi_data_align: MIPI-CSI interface data alignment in bits
* @i2c_bus_num: i2c control bus id the sensor is attached to
* @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
- * @flags: flags defining bus signals polarity inversion (High by default)
+ * @clk_id: index of the SoC peripheral clock for sensors
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
*/
struct s5p_fimc_isp_info {
struct i2c_board_info *board_info;
@@ -46,6 +42,7 @@ struct s5p_fimc_isp_info {
u16 i2c_bus_num;
u16 mux_id;
u16 flags;
+ u8 clk_id;
};
/**
@@ -58,4 +55,13 @@ struct s5p_platform_fimc {
struct s5p_fimc_isp_info *isp_info;
int num_clients;
};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at begining of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
#endif /* S5P_FIMC_H_ */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 6e84cde44b8..0f037e8edf9 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -24,24 +24,32 @@
extern unsigned int saa7146_debug;
-//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__func__)
-
#ifndef DEBUG_VARIABLE
#define DEBUG_VARIABLE saa7146_debug
#endif
-#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME, __func__)
-#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; }
-
-#define ERR(x) { DEBUG_PROLOG; printk x; }
-
-#define DEB_S(x) if (0!=(DEBUG_VARIABLE&0x01)) { DEBUG_PROLOG; printk x; } /* simple debug messages */
-#define DEB_D(x) if (0!=(DEBUG_VARIABLE&0x02)) { DEBUG_PROLOG; printk x; } /* more detailed debug messages */
-#define DEB_EE(x) if (0!=(DEBUG_VARIABLE&0x04)) { DEBUG_PROLOG; printk x; } /* print enter and exit of functions */
-#define DEB_I2C(x) if (0!=(DEBUG_VARIABLE&0x08)) { DEBUG_PROLOG; printk x; } /* i2c debug messages */
-#define DEB_VBI(x) if (0!=(DEBUG_VARIABLE&0x10)) { DEBUG_PROLOG; printk x; } /* vbi debug messages */
-#define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */
-#define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */
+#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...) \
+do { \
+ if (DEBUG_VARIABLE & mask) \
+ pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__)
#define SAA7146_ISR_CLEAR(x,y) \
saa7146_write(x, ISR, (y));
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 7582952dcea..b1377b931eb 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -12,12 +12,14 @@
#ifndef SOC_CAMERA_H
#define SOC_CAMERA_H
+#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/videodev2.h>
#include <media/videobuf-core.h>
#include <media/videobuf2-core.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
struct file;
@@ -37,8 +39,8 @@ struct soc_camera_device {
unsigned char iface; /* Host number */
unsigned char devnum; /* Device number per host */
struct soc_camera_sense *sense; /* See comment in struct definition */
- struct soc_camera_ops *ops;
struct video_device *vdev;
+ struct v4l2_ctrl_handler ctrl_handler;
const struct soc_camera_format_xlate *current_fmt;
struct soc_camera_format_xlate *user_formats;
int num_user_formats;
@@ -93,14 +95,10 @@ struct soc_camera_host_ops {
int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *);
int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
int (*set_bus_param)(struct soc_camera_device *, __u32);
- int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *);
- int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *);
int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *);
unsigned int (*poll)(struct file *, poll_table *);
- const struct v4l2_queryctrl *controls;
- int num_controls;
};
#define SOCAM_SENSOR_INVERT_PCLK (1 << 0)
@@ -193,13 +191,6 @@ struct soc_camera_format_xlate {
const struct soc_mbus_pixelfmt *host_fmt;
};
-struct soc_camera_ops {
- unsigned long (*query_bus_param)(struct soc_camera_device *);
- int (*set_bus_param)(struct soc_camera_device *, unsigned long);
- const struct v4l2_queryctrl *controls;
- int num_controls;
-};
-
#define SOCAM_SENSE_PCLK_CHANGED (1 << 0)
/**
@@ -226,65 +217,18 @@ struct soc_camera_sense {
unsigned long pixel_clock;
};
-static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
- struct soc_camera_ops *ops, int id)
-{
- int i;
-
- for (i = 0; i < ops->num_controls; i++)
- if (ops->controls[i].id == id)
- return &ops->controls[i];
-
- return NULL;
-}
-
-#define SOCAM_MASTER (1 << 0)
-#define SOCAM_SLAVE (1 << 1)
-#define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2)
-#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3)
-#define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4)
-#define SOCAM_VSYNC_ACTIVE_LOW (1 << 5)
-#define SOCAM_DATAWIDTH_4 (1 << 6)
-#define SOCAM_DATAWIDTH_8 (1 << 7)
-#define SOCAM_DATAWIDTH_9 (1 << 8)
-#define SOCAM_DATAWIDTH_10 (1 << 9)
-#define SOCAM_DATAWIDTH_15 (1 << 10)
-#define SOCAM_DATAWIDTH_16 (1 << 11)
-#define SOCAM_PCLK_SAMPLE_RISING (1 << 12)
-#define SOCAM_PCLK_SAMPLE_FALLING (1 << 13)
-#define SOCAM_DATA_ACTIVE_HIGH (1 << 14)
-#define SOCAM_DATA_ACTIVE_LOW (1 << 15)
-#define SOCAM_MIPI_1LANE (1 << 16)
-#define SOCAM_MIPI_2LANE (1 << 17)
-#define SOCAM_MIPI_3LANE (1 << 18)
-#define SOCAM_MIPI_4LANE (1 << 19)
-#define SOCAM_MIPI (SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
- SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
+#define SOCAM_DATAWIDTH(x) BIT((x) - 1)
+#define SOCAM_DATAWIDTH_4 SOCAM_DATAWIDTH(4)
+#define SOCAM_DATAWIDTH_8 SOCAM_DATAWIDTH(8)
+#define SOCAM_DATAWIDTH_9 SOCAM_DATAWIDTH(9)
+#define SOCAM_DATAWIDTH_10 SOCAM_DATAWIDTH(10)
+#define SOCAM_DATAWIDTH_15 SOCAM_DATAWIDTH(15)
+#define SOCAM_DATAWIDTH_16 SOCAM_DATAWIDTH(16)
#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16)
-static inline unsigned long soc_camera_bus_param_compatible(
- unsigned long camera_flags, unsigned long bus_flags)
-{
- unsigned long common_flags, hsync, vsync, pclk, data, buswidth, mode;
- unsigned long mipi;
-
- common_flags = camera_flags & bus_flags;
-
- hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW);
- vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW);
- pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING);
- data = common_flags & (SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW);
- mode = common_flags & (SOCAM_MASTER | SOCAM_SLAVE);
- buswidth = common_flags & SOCAM_DATAWIDTH_MASK;
- mipi = common_flags & SOCAM_MIPI;
-
- return ((!hsync || !vsync || !pclk || !data || !mode || !buswidth) && !mipi) ? 0 :
- common_flags;
-}
-
static inline void soc_camera_limit_side(int *start, int *length,
unsigned int start_min,
unsigned int length_min, unsigned int length_max)
@@ -300,23 +244,37 @@ static inline void soc_camera_limit_side(int *start, int *length,
*start = start_min + length_max - *length;
}
-extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
- unsigned long flags);
+unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
+ unsigned long flags);
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+ const struct v4l2_mbus_config *cfg);
/* This is only temporary here - until v4l2-subdev begins to link to video_device */
#include <linux/i2c.h>
-static inline struct video_device *soc_camera_i2c_to_vdev(struct i2c_client *client)
+static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ return icd ? icd->vdev : NULL;
+}
+
+static inline struct soc_camera_link *soc_camera_i2c_to_link(const struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+
+static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(const struct video_device *vdev)
{
- struct soc_camera_device *icd = client->dev.platform_data;
- return icd->vdev;
+ struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
+ return soc_camera_to_subdev(icd);
}
-static inline struct soc_camera_device *soc_camera_from_vb2q(struct vb2_queue *vq)
+static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq)
{
return container_of(vq, struct soc_camera_device, vb2_vidq);
}
-static inline struct soc_camera_device *soc_camera_from_vbq(struct videobuf_queue *vq)
+static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq)
{
return container_of(vq, struct soc_camera_device, vb_vidq);
}
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
index 74f0fa15ca4..8aa4200a0b1 100644
--- a/include/media/soc_camera_platform.h
+++ b/include/media/soc_camera_platform.h
@@ -13,6 +13,7 @@
#include <linux/videodev2.h>
#include <media/soc_camera.h>
+#include <media/v4l2-mediabus.h>
struct device;
@@ -20,7 +21,8 @@ struct soc_camera_platform_info {
const char *format_name;
unsigned long format_depth;
struct v4l2_mbus_framefmt format;
- unsigned long bus_param;
+ unsigned long mbus_param;
+ enum v4l2_mbus_type mbus_type;
struct soc_camera_device *icd;
int (*set_capture)(struct soc_camera_platform_info *info, int enable);
};
diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h
index fae432544b4..73f1e7eb60f 100644
--- a/include/media/soc_mediabus.h
+++ b/include/media/soc_mediabus.h
@@ -82,5 +82,7 @@ const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+ unsigned int flags);
#endif
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 63fd9d3db29..810a20928a2 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -212,9 +212,6 @@ enum {
/* module sn9c20x: just ident 10000 */
V4L2_IDENT_SN9C20X = 10000,
- /* Siliconfile sensors: reserved range 10100 - 10199 */
- V4L2_IDENT_NOON010PC30 = 10100,
-
/* module cx231xx and cx25840 */
V4L2_IDENT_CX2310X_AV = 23099, /* Integrated A/V decoder; not in '100 */
V4L2_IDENT_CX23100 = 23100,
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 13fe4d744ab..eeb3df63714 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -65,14 +65,12 @@ struct v4l2_ctrl_ops {
* @is_private: If set, then this control is private to its handler and it
* will not be added to any other handlers. Drivers can set
* this flag.
- * @is_volatile: If set, then this control is volatile. This means that the
- * control's current value cannot be cached and needs to be
- * retrieved through the g_volatile_ctrl op. Drivers can set
- * this flag.
* @is_auto: If set, then this control selects whether the other cluster
* members are in 'automatic' mode or 'manual' mode. This is
* used for autogain/gain type clusters. Drivers should never
* set this flag directly.
+ * @has_volatiles: If set, then one or more members of the cluster are volatile.
+ * Drivers should never touch this flag.
* @manual_mode_value: If the is_auto flag is set, then this is the value
* of the auto control that determines if that control is in
* manual mode. So if the value of the auto control equals this
@@ -118,8 +116,8 @@ struct v4l2_ctrl {
unsigned int is_new:1;
unsigned int is_private:1;
- unsigned int is_volatile:1;
unsigned int is_auto:1;
+ unsigned int has_volatiles:1;
unsigned int manual_mode_value:8;
const struct v4l2_ctrl_ops *ops;
@@ -208,9 +206,6 @@ struct v4l2_ctrl_handler {
* must be NULL.
* @is_private: If set, then this control is private to its handler and it
* will not be added to any other handlers.
- * @is_volatile: If set, then this control is volatile. This means that the
- * control's current value cannot be cached and needs to be
- * retrieved through the g_volatile_ctrl op.
*/
struct v4l2_ctrl_config {
const struct v4l2_ctrl_ops *ops;
@@ -225,7 +220,6 @@ struct v4l2_ctrl_config {
u32 menu_skip_mask;
const char * const *qmenu;
unsigned int is_private:1;
- unsigned int is_volatile:1;
};
/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
@@ -389,8 +383,7 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
* @manual_val: The value for the first control in the cluster that equals the
* manual setting.
* @set_volatile: If true, then all controls except the first auto control will
- * have is_volatile set to true. If false, then is_volatile will not
- * be touched.
+ * be volatile.
*
* Use for control groups where one control selects some automatic feature and
* the other controls are only active whenever the automatic feature is turned
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index dd9f1e7b8ff..4d1c74ad4c8 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -122,6 +122,8 @@ struct v4l2_ioctl_ops {
int (*vidioc_qbuf) (struct file *file, void *fh, struct v4l2_buffer *b);
int (*vidioc_dqbuf) (struct file *file, void *fh, struct v4l2_buffer *b);
+ int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b);
+ int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b);
int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
int (*vidioc_g_fbuf) (struct file *file, void *fh,
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 6114007c8c7..83ae07e5335 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -22,8 +22,12 @@
*/
#define V4L2_MBUS_MASTER (1 << 0)
#define V4L2_MBUS_SLAVE (1 << 1)
-/* Which signal polarities it supports */
-/* Note: in BT.656 mode HSYNC and VSYNC are unused */
+/*
+ * Signal polarity flags
+ * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
+ * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
+ * configuration of hardware that uses [HV]REF signals
+ */
#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
@@ -32,6 +36,10 @@
#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
+/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
+/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
/* Serial flags */
/* How many lanes the client can use */
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 257da1a30f6..f0f3358d1b1 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -158,6 +158,7 @@ struct v4l2_subdev_core_ops {
int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+ int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
#ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -534,13 +535,13 @@ struct v4l2_subdev {
void *dev_priv;
void *host_priv;
/* subdev device node */
- struct video_device devnode;
+ struct video_device *devnode;
};
#define media_entity_to_v4l2_subdev(ent) \
container_of(ent, struct v4l2_subdev, entity)
#define vdev_to_v4l2_subdev(vdev) \
- container_of(vdev, struct v4l2_subdev, devnode)
+ video_get_drvdata(vdev)
/*
* Used for storing subdev information per file handle
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index f87472acbc5..a15d1f1b319 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -75,7 +75,6 @@ struct vb2_mem_ops {
struct vb2_plane {
void *mem_priv;
- int mapped:1;
};
/**
@@ -106,6 +105,7 @@ enum vb2_fileio_flags {
/**
* enum vb2_buffer_state - current video buffer state
* @VB2_BUF_STATE_DEQUEUED: buffer under userspace control
+ * @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver
* @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver
* @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used
* in a hardware operation
@@ -117,6 +117,7 @@ enum vb2_fileio_flags {
*/
enum vb2_buffer_state {
VB2_BUF_STATE_DEQUEUED,
+ VB2_BUF_STATE_PREPARED,
VB2_BUF_STATE_QUEUED,
VB2_BUF_STATE_ACTIVE,
VB2_BUF_STATE_DONE,
@@ -147,7 +148,6 @@ struct vb2_queue;
* @done_entry: entry on the list that stores all buffers ready to
* be dequeued to userspace
* @planes: private per-plane information; do not change
- * @num_planes_mapped: number of mapped planes; do not change
*/
struct vb2_buffer {
struct v4l2_buffer v4l2_buf;
@@ -164,19 +164,26 @@ struct vb2_buffer {
struct list_head done_entry;
struct vb2_plane planes[VIDEO_MAX_PLANES];
- unsigned int num_planes_mapped;
};
/**
* struct vb2_ops - driver-specific callbacks
*
- * @queue_setup: called from a VIDIOC_REQBUFS handler, before
- * memory allocation; driver should return the required
- * number of buffers in num_buffers, the required number
- * of planes per buffer in num_planes; the size of each
- * plane should be set in the sizes[] array and optional
- * per-plane allocator specific context in alloc_ctxs[]
- * array
+ * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ * handlers before memory allocation, or, if
+ * *num_planes != 0, after the allocation to verify a
+ * smaller number of buffers. Driver should return
+ * the required number of buffers in *num_buffers, the
+ * required number of planes per buffer in *num_planes; the
+ * size of each plane should be set in the sizes[] array
+ * and optional per-plane allocator specific context in the
+ * alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
+ * fmt == NULL, the driver has to use the currently
+ * configured format and *num_buffers is the total number
+ * of buffers, that are being allocated. When called from
+ * VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
+ * target frame format. In this case *num_buffers are being
+ * allocated additionally to q->num_buffers.
* @wait_prepare: release any locks taken while calling vb2 functions;
* it is called before an ioctl needs to wait for a new
* buffer to arrive; required to avoid a deadlock in
@@ -189,30 +196,39 @@ struct vb2_buffer {
* perform additional buffer-related initialization;
* initialization failure (return != 0) will prevent
* queue setup from completing successfully; optional
- * @buf_prepare: called every time the buffer is queued from userspace;
- * drivers may perform any initialization required before
- * each hardware operation in this callback;
- * if an error is returned, the buffer will not be queued
- * in driver; optional
+ * @buf_prepare: called every time the buffer is queued from userspace
+ * and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ * perform any initialization required before each hardware
+ * operation in this callback; if an error is returned, the
+ * buffer will not be queued in driver; optional
* @buf_finish: called before every dequeue of the buffer back to
* userspace; drivers may perform any operations required
* before userspace accesses the buffer; optional
* @buf_cleanup: called once before the buffer is freed; drivers may
* perform any additional cleanup; optional
- * @start_streaming: called once before entering 'streaming' state; enables
- * driver to receive buffers over buf_queue() callback
+ * @start_streaming: called once to enter 'streaming' state; the driver may
+ * receive buffers with @buf_queue callback before
+ * @start_streaming is called; the driver gets the number
+ * of already queued buffers in count parameter; driver
+ * can return an error if hardware fails or not enough
+ * buffers has been queued, in such case all buffers that
+ * have been already given by the @buf_queue callback are
+ * invalidated.
* @stop_streaming: called when 'streaming' state must be disabled; driver
* should stop any DMA transactions or wait until they
* finish and give back all buffers it got from buf_queue()
* callback; may use vb2_wait_for_all_buffers() function
* @buf_queue: passes buffer vb to the driver; driver may start
* hardware operation on this buffer; driver should give
- * the buffer back by calling vb2_buffer_done() function
+ * the buffer back by calling vb2_buffer_done() function;
+ * it is allways called after calling STREAMON ioctl;
+ * might be called before start_streaming callback if user
+ * pre-queued buffers before calling STREAMON
*/
struct vb2_ops {
- int (*queue_setup)(struct vb2_queue *q, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned long sizes[],
- void *alloc_ctxs[]);
+ int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *alloc_ctxs[]);
void (*wait_prepare)(struct vb2_queue *q);
void (*wait_finish)(struct vb2_queue *q);
@@ -222,7 +238,7 @@ struct vb2_ops {
int (*buf_finish)(struct vb2_buffer *vb);
void (*buf_cleanup)(struct vb2_buffer *vb);
- int (*start_streaming)(struct vb2_queue *q);
+ int (*start_streaming)(struct vb2_queue *q, unsigned int count);
int (*stop_streaming)(struct vb2_queue *q);
void (*buf_queue)(struct vb2_buffer *vb);
@@ -276,6 +292,7 @@ struct vb2_queue {
wait_queue_head_t done_wq;
void *alloc_ctx[VIDEO_MAX_PLANES];
+ unsigned int plane_sizes[VIDEO_MAX_PLANES];
unsigned int streaming:1;
@@ -291,6 +308,9 @@ int vb2_wait_for_all_buffers(struct vb2_queue *q);
int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
int vb2_queue_init(struct vb2_queue *q);
void vb2_queue_release(struct vb2_queue *q);
@@ -302,6 +322,13 @@ int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+ unsigned long addr,
+ unsigned long len,
+ unsigned long pgoff,
+ unsigned long flags);
+#endif
unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock);
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
index 7e6c68b2377..19ae1e35056 100644
--- a/include/media/videobuf2-dma-contig.h
+++ b/include/media/videobuf2-dma-contig.h
@@ -17,11 +17,11 @@
#include <linux/dma-mapping.h>
static inline dma_addr_t
-vb2_dma_contig_plane_paddr(struct vb2_buffer *vb, unsigned int plane_no)
+vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
{
- dma_addr_t *paddr = vb2_plane_cookie(vb, plane_no);
+ dma_addr_t *addr = vb2_plane_cookie(vb, plane_no);
- return *paddr;
+ return *addr;
}
void *vb2_dma_contig_init_ctx(struct device *dev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 07:37:48 +0000