summaryrefslogtreecommitdiffstats
path: root/include/media
diff options
context:
space:
mode:
Diffstat (limited to 'include/media')
-rw-r--r--include/media/upd64031a.h41
-rw-r--r--include/media/upd64083.h59
2 files changed, 100 insertions, 0 deletions
diff --git a/include/media/upd64031a.h b/include/media/upd64031a.h
new file mode 100644
index 00000000000..ae2d936355c
--- /dev/null
+++ b/include/media/upd64031a.h
@@ -0,0 +1,41 @@
+/*
+ * upd64031a - NEC Electronics Ghost Reduction input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _UPD64031A_H_
+#define _UPD64031A_H_
+
+/* Ghost reduction modes */
+#define UPD64031A_GR_ON 0
+#define UPD64031A_GR_OFF 1
+#define UPD64031A_GR_THROUGH 3
+
+/* Direct 3D/YCS Connection */
+#define UPD64031A_3DYCS_DISABLE (0 << 2)
+#define UPD64031A_3DYCS_COMPOSITE (2 << 2)
+#define UPD64031A_3DYCS_SVIDEO (3 << 2)
+
+/* Composite sync digital separation circuit */
+#define UPD64031A_COMPOSITE_EXTERNAL (1 << 4)
+
+/* Vertical sync digital separation circuit */
+#define UPD64031A_VERTICAL_EXTERNAL (1 << 5)
+
+#endif
+
diff --git a/include/media/upd64083.h b/include/media/upd64083.h
new file mode 100644
index 00000000000..77f48a8f154
--- /dev/null
+++ b/include/media/upd64083.h
@@ -0,0 +1,59 @@
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _UPD64083_H_
+#define _UPD64083_H_
+
+/* There are two bits of information that the driver needs in order
+ to select the correct routing: the operating mode and the selection
+ of the Y input (external or internal).
+
+ The first two operating modes expect a composite signal on the Y input,
+ the second two operating modes use both the Y and C inputs.
+
+ Normally YCS_MODE is used for tuner and composite inputs, and the
+ YCNR mode is used for S-Video inputs.
+
+ The external Y-ADC is selected when the composite input comes from a
+ upd64031a ghost reduction device. If this device is not present, or
+ the input is a S-Video signal, then the internal Y-ADC input should
+ be used. */
+
+/* Operating modes: */
+
+/* YCS mode: Y/C separation (burst locked clocking) */
+#define UPD64083_YCS_MODE 0
+/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
+#define UPD64083_YCS_PLUS_MODE 1
+
+/* Note: the following two modes cannot be used in combination with the
+ external Y-ADC. */
+/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
+#define UPD64083_MNNR_MODE 2
+/* YCNR mode: frame recursive YCNR (burst locked clocking) */
+#define UPD64083_YCNR_MODE 3
+
+/* Select external Y-ADC: this should be set if this device is used in
+ combination with the upd64031a ghost reduction device.
+ Otherwise leave at 0 (use internal Y-ADC). */
+#define UPD64083_EXT_Y_ADC (1 << 2)
+
+#endif
+