1 files changed, 204 insertions, 71 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 95852e36713..a067d30ce73 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -391,6 +391,8 @@ struct cfg80211_crypto_settings {
  * @assocresp_ies: extra information element(s) to add into (Re)Association
  *	Response frames or %NULL
  * @assocresp_ies_len: length of assocresp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ * @probe_resp: probe response template (AP mode only)
  */
 struct beacon_parameters {
 	u8 *head, *tail;
@@ -408,6 +410,8 @@ struct beacon_parameters {
 	size_t proberesp_ies_len;
 	const u8 *assocresp_ies;
 	size_t assocresp_ies_len;
+	int probe_resp_len;
+	u8 *probe_resp;
 };
 
 /**
@@ -501,6 +505,7 @@ struct station_parameters {
  * @STATION_INFO_CONNECTED_TIME: @connected_time filled
  * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
  * @STATION_INFO_STA_FLAGS: @sta_flags filled
+ * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -521,7 +526,8 @@ enum station_info_flags {
 	STATION_INFO_BSS_PARAM          = 1<<15,
 	STATION_INFO_CONNECTED_TIME	= 1<<16,
 	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
-	STATION_INFO_STA_FLAGS		= 1<<18
+	STATION_INFO_STA_FLAGS		= 1<<18,
+	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19
 };
 
 /**
@@ -619,6 +625,7 @@ struct sta_bss_parameters {
  *	the cfg80211_new_sta() calls to notify user space of the IEs.
  * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
  * @sta_flags: station flags mask & values
+ * @beacon_loss_count: Number of times beacon loss event has triggered.
  */
 struct station_info {
 	u32 filled;
@@ -646,6 +653,8 @@ struct station_info {
 	const u8 *assoc_req_ies;
 	size_t assoc_req_ies_len;
 
+	u32 beacon_loss_count;
+
 	/*
 	 * Note: Add a new enum station_info_flags value for each new field and
 	 * use it to check which fields are initialized.
@@ -778,6 +787,7 @@ struct mesh_config {
 	u16 min_discovery_timeout;
 	u32 dot11MeshHWMPactivePathTimeout;
 	u16 dot11MeshHWMPpreqMinInterval;
+	u16 dot11MeshHWMPperrMinInterval;
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
 	u8  dot11MeshHWMPRootMode;
 	u16 dot11MeshHWMPRannInterval;
@@ -798,6 +808,7 @@ struct mesh_config {
  * @ie_len: length of vendor information elements
  * @is_authenticated: this mesh requires authentication
  * @is_secure: this mesh uses security
+ * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -810,6 +821,7 @@ struct mesh_setup {
 	u8 ie_len;
 	bool is_authenticated;
 	bool is_secure;
+	int mcast_rate[IEEE80211_NUM_BANDS];
 };
 
 /**
@@ -1040,6 +1052,15 @@ struct cfg80211_auth_request {
 };
 
 /**
+ * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
+ *
+ * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
+ */
+enum cfg80211_assoc_req_flags {
+	ASSOC_REQ_DISABLE_HT		= BIT(0),
+};
+
+/**
  * struct cfg80211_assoc_request - (Re)Association request data
  *
  * This structure provides information needed to complete IEEE 802.11
@@ -1050,6 +1071,10 @@ struct cfg80211_auth_request {
  * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
  * @crypto: crypto settings
  * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
+ * @flags:  See &enum cfg80211_assoc_req_flags
+ * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
+ *   will be used in ht_capa.  Un-supported values will be ignored.
+ * @ht_capa_mask:  The bits of ht_capa which are to be used.
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -1057,6 +1082,9 @@ struct cfg80211_assoc_request {
 	size_t ie_len;
 	struct cfg80211_crypto_settings crypto;
 	bool use_mfp;
+	u32 flags;
+	struct ieee80211_ht_cap ht_capa;
+	struct ieee80211_ht_cap ht_capa_mask;
 };
 
 /**
@@ -1112,6 +1140,7 @@ struct cfg80211_disassoc_request {
  * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
  *	search for IBSSs with a different BSSID.
  * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_type: channel type (HT mode)
  * @channel_fixed: The channel should be fixed -- do not search for
  *	IBSSs to join on other channels.
  * @ie: information element(s) to include in the beacon
@@ -1126,6 +1155,7 @@ struct cfg80211_ibss_params {
 	u8 *ssid;
 	u8 *bssid;
 	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
 	u8 *ie;
 	u8 ssid_len, ie_len;
 	u16 beacon_interval;
@@ -1155,6 +1185,10 @@ struct cfg80211_ibss_params {
  * @key_len: length of WEP key for shared key authentication
  * @key_idx: index of WEP key for shared key authentication
  * @key: WEP key for shared key authentication
+ * @flags:  See &enum cfg80211_assoc_req_flags
+ * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
+ *   will be used in ht_capa.  Un-supported values will be ignored.
+ * @ht_capa_mask:  The bits of ht_capa which are to be used.
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
@@ -1168,6 +1202,9 @@ struct cfg80211_connect_params {
 	struct cfg80211_crypto_settings crypto;
 	const u8 *key;
 	u8 key_len, key_idx;
+	u32 flags;
+	struct ieee80211_ht_cap ht_capa;
+	struct ieee80211_ht_cap ht_capa_mask;
 };
 
 /**
@@ -1315,7 +1352,12 @@ struct cfg80211_gtk_rekey_data {
  *
  * @add_station: Add a new station.
  * @del_station: Remove a station; @mac may be NULL to remove all stations.
- * @change_station: Modify a given station.
+ * @change_station: Modify a given station. Note that flags changes are not much
+ *	validated in cfg80211, in particular the auth/assoc/authorized flags
+ *	might come to the driver in invalid combinations -- make sure to check
+ *	them, also against the existing state! Also, supported_rates changes are
+ *	not checked in station mode -- drivers need to reject (or ignore) them
+ *	for anything but TDLS peers.
  * @get_station: get station information for the station identified by @mac
  * @dump_station: dump station callback -- resume dump at index @idx
  *
@@ -1342,6 +1384,9 @@ struct cfg80211_gtk_rekey_data {
  *	doesn't verify much. Note, however, that the passed netdev may be
  *	%NULL as well if the user requested changing the channel for the
  *	device itself, or for a monitor interface.
+ * @get_channel: Get the current operating channel, should return %NULL if
+ *	there's no single defined operating channel if for example the
+ *	device implements channel hopping for multi-channel virtual interfaces.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1369,7 +1414,8 @@ struct cfg80211_gtk_rekey_data {
  *	have changed. The actual parameter values are available in
  *	struct wiphy. If returning an error, no value should be changed.
  *
- * @set_tx_power: set the transmit power according to the parameters
+ * @set_tx_power: set the transmit power according to the parameters,
+ *	the power passed is in mBm, to get dBm use MBM_TO_DBM().
  * @get_tx_power: store the current TX power into the dbm variable;
  *	return 0 if successful
  *
@@ -1432,6 +1478,11 @@ struct cfg80211_gtk_rekey_data {
  *
  * @tdls_mgmt: Transmit a TDLS management frame.
  * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
+ *
+ * @probe_client: probe an associated client, must return a cookie that it
+ *	later passes to cfg80211_probe_status().
+ *
+ * @set_noack_map: Set the NoAck Map for the TIDs.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1585,7 +1636,7 @@ struct cfg80211_ops {
 			  enum nl80211_channel_type channel_type,
 			  bool channel_type_valid, unsigned int wait,
 			  const u8 *buf, size_t len, bool no_cck,
-			  u64 *cookie);
+			  bool dont_wait_for_ack, u64 *cookie);
 	int	(*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       u64 cookie);
@@ -1621,6 +1672,15 @@ struct cfg80211_ops {
 			     u16 status_code, const u8 *buf, size_t len);
 	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 *peer, enum nl80211_tdls_operation oper);
+
+	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *peer, u64 *cookie);
+
+	int	(*set_noack_map)(struct wiphy *wiphy,
+				  struct net_device *dev,
+				  u16 noack_map);
+
+	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy);
 };
 
 /*
@@ -1645,7 +1705,9 @@ struct cfg80211_ops {
  *	regulatory domain no user regulatory domain can enable these channels
  *	at a later time. This can be used for devices which do not have
  *	calibration information guaranteed for frequencies or settings
- *	outside of its regulatory domain.
+ *	outside of its regulatory domain. If used in combination with
+ *	WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings
+ *	will be followed.
  * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
  *	that passive scan flags and beaconing flags may not be lifted by
  *	cfg80211 due to regulatory beacon hints. For more information on beacon
@@ -1679,6 +1741,14 @@ struct cfg80211_ops {
  *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
  *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
  *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ *	when there are virtual interfaces in AP mode by calling
+ *	cfg80211_report_obss_beacon().
+ * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
+ *	responds to probe-requests in hardware.
+ * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
+ * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1697,6 +1767,11 @@ enum wiphy_flags {
 	WIPHY_FLAG_AP_UAPSD			= BIT(14),
 	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
 	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
+	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
+	WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD	= BIT(19),
+	WIPHY_FLAG_OFFCHAN_TX			= BIT(20),
+	WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL	= BIT(21),
 };
 
 /**
@@ -1869,6 +1944,7 @@ struct wiphy_wowlan_support {
  * @software_iftypes: bitmask of software interface types, these are not
  *	subject to any restrictions since they are purely managed in SW.
  * @flags: wiphy flags, see &enum wiphy_flags
+ * @features: features advertised to nl80211, see &enum nl80211_feature_flags.
  * @bss_priv_size: each BSS struct has private data allocated with it,
  *	this variable determines its size
  * @max_scan_ssids: maximum number of SSIDs the device can scan for in
@@ -1903,10 +1979,19 @@ struct wiphy_wowlan_support {
  *	configured as RX antennas. Antenna configuration commands will be
  *	rejected unless this or @available_antennas_tx is set.
  *
+ * @probe_resp_offload:
+ *	 Bitmap of supported protocols for probe response offloading.
+ *	 See &enum nl80211_probe_resp_offload_support_attr. Only valid
+ *	 when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+ *
  * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
  *	may request, if implemented.
  *
  * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
+ * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
+ *	If null, then none can be over-ridden.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1928,7 +2013,9 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
-	u32 flags;
+	u32 flags, features;
+
+	u32 ap_sme_capa;
 
 	enum cfg80211_signal_type signal_type;
 
@@ -1960,6 +2047,13 @@ struct wiphy {
 	u32 available_antennas_tx;
 	u32 available_antennas_rx;
 
+	/*
+	 * Bitmap of supported protocols for probe response offloading
+	 * see &enum nl80211_probe_resp_offload_support_attr. Only valid
+	 * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+	 */
+	u32 probe_resp_offload;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered
@@ -1987,6 +2081,8 @@ struct wiphy {
 	/* dir in debugfs: ieee80211/<wiphyname> */
 	struct dentry *debugfsdir;
 
+	const struct ieee80211_ht_cap *ht_capa_mod_mask;
+
 #ifdef CONFIG_NET_NS
 	/* the network namespace this phy lives in currently */
 	struct net *_net;
@@ -2183,6 +2279,8 @@ struct wireless_dev {
 
 	int beacon_interval;
 
+	u32 ap_unexpected_nlpid;
+
 #ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
@@ -2349,69 +2447,6 @@ extern int ieee80211_radiotap_iterator_next(
 extern const unsigned char rfc1042_header[6];
 extern const unsigned char bridge_tunnel_header[6];
 
-/* Parsed Information Elements */
-struct ieee802_11_elems {
-	u8 *ie_start;
-	size_t total_len;
-
-	/* pointers to IEs */
-	u8 *ssid;
-	u8 *supp_rates;
-	u8 *fh_params;
-	u8 *ds_params;
-	u8 *cf_params;
-	struct ieee80211_tim_ie *tim;
-	u8 *ibss_params;
-	u8 *challenge;
-	u8 *wpa;
-	u8 *rsn;
-	u8 *erp_info;
-	u8 *ext_supp_rates;
-	u8 *wmm_info;
-	u8 *wmm_param;
-	struct ieee80211_ht_cap *ht_cap_elem;
-	struct ieee80211_ht_info *ht_info_elem;
-	struct ieee80211_meshconf_ie *mesh_config;
-	u8 *mesh_id;
-	u8 *peering;
-	u8 *preq;
-	u8 *prep;
-	u8 *perr;
-	struct ieee80211_rann_ie *rann;
-	u8 *ch_switch_elem;
-	u8 *country_elem;
-	u8 *pwr_constr_elem;
-	u8 *quiet_elem;	/* first quite element */
-	u8 *timeout_int;
-
-	/* length of them, respectively */
-	u8 ssid_len;
-	u8 supp_rates_len;
-	u8 fh_params_len;
-	u8 ds_params_len;
-	u8 cf_params_len;
-	u8 tim_len;
-	u8 ibss_params_len;
-	u8 challenge_len;
-	u8 wpa_len;
-	u8 rsn_len;
-	u8 erp_info_len;
-	u8 ext_supp_rates_len;
-	u8 wmm_info_len;
-	u8 wmm_param_len;
-	u8 mesh_id_len;
-	u8 peering_len;
-	u8 preq_len;
-	u8 prep_len;
-	u8 perr_len;
-	u8 ch_switch_elem_len;
-	u8 country_elem_len;
-	u8 pwr_constr_elem_len;
-	u8 quiet_elem_len;
-	u8 num_of_quiet_elem;	/* can be more the one */
-	u8 timeout_int_len;
-};
-
 /**
  * ieee80211_get_hdrlen_from_skb - get header length from data
  *
@@ -2636,8 +2671,10 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
  *
  * This informs cfg80211 that BSS information was found and
  * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
  */
-struct cfg80211_bss*
+struct cfg80211_bss * __must_check
 cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_channel *channel,
 			  struct ieee80211_mgmt *mgmt, size_t len,
@@ -2659,8 +2696,10 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
  *
  * This informs cfg80211 that BSS information was found and
  * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
  */
-struct cfg80211_bss*
+struct cfg80211_bss * __must_check
 cfg80211_inform_bss(struct wiphy *wiphy,
 		    struct ieee80211_channel *channel,
 		    const u8 *bssid,
@@ -3043,6 +3082,32 @@ void cfg80211_roamed(struct net_device *dev,
 		     const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
 
 /**
+ * cfg80211_roamed_bss - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @bss: entry of bss to which STA got roamed
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * This is just a wrapper to notify cfg80211 of roaming event with driver
+ * passing bss to avoid a race in timeout of the bss entry. It should be
+ * called by the underlying driver whenever it roamed from one AP to another
+ * while connected. Drivers which have roaming implemented in firmware
+ * may use this function to avoid a race in bss entry timeout where the bss
+ * entry of the new AP is seen in the driver, but gets timed out by the time
+ * it is accessed in __cfg80211_roamed() due to delay in scheduling
+ * rdev->event_work. In case of any failures, the reference is released
+ * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise,
+ * it will be released while diconneting from the current bss.
+ */
+void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss,
+			 const u8 *req_ie, size_t req_ie_len,
+			 const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
  * cfg80211_disconnected - notify cfg80211 that connection was dropped
  *
  * @dev: network device
@@ -3189,6 +3254,74 @@ void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
 void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
 				     const u8 *bssid, bool preauth, gfp_t gfp);
 
+/**
+ * cfg80211_rx_spurious_frame - inform userspace about a spurious frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * a spurious class 3 frame was received, to be able to deauth the
+ * sender.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_spurious_frame(struct net_device *dev,
+				const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * an associated station sent a 4addr frame but that wasn't expected.
+ * It is allowed and desirable to send this event only once for each
+ * station to avoid event flooding.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
+					const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_probe_status - notify userspace about probe status
+ * @dev: the device the probe was sent on
+ * @addr: the address of the peer
+ * @cookie: the cookie filled in @probe_client previously
+ * @acked: indicates whether probe was acked or not
+ * @gfp: allocation flags
+ */
+void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
+			   u64 cookie, bool acked, gfp_t gfp);
+
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+				 const u8 *frame, size_t len,
+				 int freq, gfp_t gfp);
+
+/*
+ * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
+ * @wiphy: the wiphy
+ * @chan: main channel
+ * @channel_type: HT mode
+ */
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */