diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 385 |
1 files changed, 240 insertions, 145 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 401d73bd151..92cf1c2c30c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -20,11 +20,6 @@ #include <linux/ieee80211.h> #include <net/regulatory.h> -/* remove once we remove the wext stuff */ -#include <net/iw_handler.h> -#include <linux/wireless.h> - - /** * DOC: Introduction * @@ -339,6 +334,36 @@ struct survey_info { }; /** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; +}; + +/** * struct beacon_parameters - beacon parameters * * Used to configure the beacon for an interface. @@ -351,11 +376,38 @@ struct survey_info { * @dtim_period: DTIM period or zero if not changed * @head_len: length of @head * @tail_len: length of @tail + * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from + * user space) + * @ssid_len: length of @ssid + * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) + * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL + * @beacon_ies_len: length of beacon_ies in octets + * @proberesp_ies: extra information element(s) to add into Probe Response + * frames or %NULL + * @proberesp_ies_len: length of proberesp_ies in octets + * @assocresp_ies: extra information element(s) to add into (Re)Association + * Response frames or %NULL + * @assocresp_ies_len: length of assocresp_ies in octets */ struct beacon_parameters { u8 *head, *tail; int interval, dtim_period; int head_len, tail_len; + const u8 *ssid; + size_t ssid_len; + enum nl80211_hidden_ssid hidden_ssid; + struct cfg80211_crypto_settings crypto; + bool privacy; + enum nl80211_auth_type auth_type; + const u8 *beacon_ies; + size_t beacon_ies_len; + const u8 *proberesp_ies; + size_t proberesp_ies_len; + const u8 *assocresp_ies; + size_t assocresp_ies_len; }; /** @@ -372,6 +424,17 @@ enum plink_actions { }; /** + * enum station_parameters_apply_mask - station parameter values to apply + * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * + * Not all station parameters have in-band "no change" signalling, + * for those that don't these flags will are used. + */ +enum station_parameters_apply_mask { + STATION_PARAM_APPLY_UAPSD = BIT(0), +}; + +/** * struct station_parameters - station parameters * * Used to change and create a new station. @@ -389,17 +452,24 @@ enum plink_actions { * @plink_action: plink action to take * @plink_state: set the peer link state for a station * @ht_capa: HT capabilities of station + * @uapsd_queues: bitmap of queues configured for uapsd. same format + * as the AC bitmap in the QoS info field + * @max_sp: max Service Period. same format as the MAX_SP in the + * QoS info field (but already shifted down) */ struct station_parameters { u8 *supported_rates; struct net_device *vlan; u32 sta_flags_mask, sta_flags_set; + u32 sta_modify_mask; int listen_interval; u16 aid; u8 supported_rates_len; u8 plink_action; u8 plink_state; struct ieee80211_ht_cap *ht_capa; + u8 uapsd_queues; + u8 max_sp; }; /** @@ -426,6 +496,8 @@ struct station_parameters { * @STATION_INFO_RX_BITRATE: @rxrate fields are filled * @STATION_INFO_BSS_PARAM: @bss_param filled * @STATION_INFO_CONNECTED_TIME: @connected_time filled + * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled + * @STATION_INFO_STA_FLAGS: @sta_flags filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -444,7 +516,9 @@ enum station_info_flags { STATION_INFO_SIGNAL_AVG = 1<<13, STATION_INFO_RX_BITRATE = 1<<14, STATION_INFO_BSS_PARAM = 1<<15, - STATION_INFO_CONNECTED_TIME = 1<<16 + STATION_INFO_CONNECTED_TIME = 1<<16, + STATION_INFO_ASSOC_REQ_IES = 1<<17, + STATION_INFO_STA_FLAGS = 1<<18 }; /** @@ -536,6 +610,11 @@ struct sta_bss_parameters { * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. + * @assoc_req_ies: IEs from (Re)Association Request. + * This is used only when in AP mode with drivers that do not use + * user space MLME/SME implementation. The information is provided for + * the cfg80211_new_sta() calls to notify user space of the IEs. + * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. */ struct station_info { u32 filled; @@ -556,8 +635,17 @@ struct station_info { u32 tx_failed; u32 rx_dropped_misc; struct sta_bss_parameters bss_param; + struct nl80211_sta_flag_update sta_flags; int generation; + + const u8 *assoc_req_ies; + size_t assoc_req_ies_len; + + /* + * Note: Add a new enum station_info_flags value for each new field and + * use it to check which fields are initialized. + */ }; /** @@ -688,6 +776,12 @@ struct mesh_config { u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; + u16 dot11MeshHWMPRannInterval; + /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol + * set to true only means that the station will announce others it's a + * mesh gate, but not necessarily using the gate announcement protocol. + * Still keeping the same nomenclature to be in sync with the spec. */ + bool dot11MeshGateAnnouncementProtocol; }; /** @@ -781,6 +875,7 @@ struct cfg80211_ssid { * @wiphy: the wiphy this was for * @dev: the interface * @aborted: (internal) scan request was notified as aborted + * @no_cck: used to send probe requests at non CCK rate in 2GHz band */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -795,12 +890,22 @@ struct cfg80211_scan_request { struct wiphy *wiphy; struct net_device *dev; bool aborted; + bool no_cck; /* keep last */ struct ieee80211_channel *channels[0]; }; /** + * struct cfg80211_match_set - sets of attributes to match + * + * @ssid: SSID to be matched + */ +struct cfg80211_match_set { + struct cfg80211_ssid ssid; +}; + +/** * struct cfg80211_sched_scan_request - scheduled scan request description * * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) @@ -809,6 +914,11 @@ struct cfg80211_scan_request { * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @match_sets: sets of parameters to be matched for a scan result + * entry to be considered valid and to be passed to the host + * (others are filtered out). + * If ommited, all results are passed. + * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface * @channels: channels to scan @@ -820,6 +930,8 @@ struct cfg80211_sched_scan_request { u32 interval; const u8 *ie; size_t ie_len; + struct cfg80211_match_set *match_sets; + int n_match_sets; /* internal */ struct wiphy *wiphy; @@ -896,36 +1008,6 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); /** - * struct cfg80211_crypto_settings - Crypto settings - * @wpa_versions: indicates which, if any, WPA versions are enabled - * (from enum nl80211_wpa_versions) - * @cipher_group: group key cipher suite (or 0 if unset) - * @n_ciphers_pairwise: number of AP supported unicast ciphers - * @ciphers_pairwise: unicast key cipher suites - * @n_akm_suites: number of AKM suites - * @akm_suites: AKM suites - * @control_port: Whether user space controls IEEE 802.1X port, i.e., - * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is - * required to assume that the port is unauthorized until authorized by - * user space. Otherwise, port is marked authorized by default. - * @control_port_ethertype: the control port protocol that should be - * allowed through even on unauthorized ports - * @control_port_no_encrypt: TRUE to prevent encryption of control port - * protocol frames. - */ -struct cfg80211_crypto_settings { - u32 wpa_versions; - u32 cipher_group; - int n_ciphers_pairwise; - u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; - int n_akm_suites; - u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; - bool control_port; - __be16 control_port_ethertype; - bool control_port_no_encrypt; -}; - -/** * struct cfg80211_auth_request - Authentication request data * * This structure provides information needed to complete IEEE 802.11 @@ -1343,6 +1425,9 @@ struct cfg80211_gtk_rekey_data { * @set_ringparam: Set tx and rx ring sizes. * * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tdls_mgmt: Transmit a TDLS management frame. + * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -1419,7 +1504,7 @@ struct cfg80211_ops { int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, struct bss_parameters *params); - int (*set_txq_params)(struct wiphy *wiphy, + int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_txq_params *params); int (*set_channel)(struct wiphy *wiphy, struct net_device *dev, @@ -1495,7 +1580,8 @@ struct cfg80211_ops { struct ieee80211_channel *chan, bool offchan, enum nl80211_channel_type channel_type, bool channel_type_valid, unsigned int wait, - const u8 *buf, size_t len, u64 *cookie); + const u8 *buf, size_t len, bool no_cck, + u64 *cookie); int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, struct net_device *dev, u64 cookie); @@ -1525,6 +1611,12 @@ struct cfg80211_ops { int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); + + int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, u8 action_code, u8 dialog_token, + u16 status_code, const u8 *buf, size_t len); + int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, enum nl80211_tdls_operation oper); }; /* @@ -1574,6 +1666,15 @@ struct cfg80211_ops { * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. + * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the + * firmware. + * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. + * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. + * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) + * link setup/discovery operations internally. Setup, discovery and + * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT + * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be + * used for asking the driver/firmware to perform a TDLS operation. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1588,6 +1689,10 @@ enum wiphy_flags { WIPHY_FLAG_MESH_AUTH = BIT(10), WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), + WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), + WIPHY_FLAG_AP_UAPSD = BIT(14), + WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), + WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), }; /** @@ -1749,6 +1854,7 @@ struct wiphy_wowlan_support { * @debugfsdir: debugfs directory used for this wiphy, will be renamed * automatically on wiphy renames * @dev: (virtual) struct device for this wiphy + * @registered: helps synchronize suspend/resume with wiphy unregister * @wext: wireless extension handlers * @priv: driver private data (sized according to wiphy_new() parameter) * @interface_modes: bitmask of interfaces types valid for this wiphy, @@ -1765,6 +1871,9 @@ struct wiphy_wowlan_support { * any given scan * @max_sched_scan_ssids: maximum number of SSIDs the device can scan * for in any given scheduled scan + * @max_match_sets: maximum number of match sets the device can handle + * when performing a scheduled scan, 0 if filtering is not + * supported. * @max_scan_ie_len: maximum length of user-controlled IEs device can * add to probe request frames transmitted during a scan, must not * include fixed IEs like supported rates @@ -1822,6 +1931,7 @@ struct wiphy { int bss_priv_size; u8 max_scan_ssids; u8 max_sched_scan_ssids; + u8 max_match_sets; u16 max_scan_ie_len; u16 max_sched_scan_ie_len; @@ -2235,6 +2345,69 @@ extern int ieee80211_radiotap_iterator_next( extern const unsigned char rfc1042_header[6]; extern const unsigned char bridge_tunnel_header[6]; +/* Parsed Information Elements */ +struct ieee802_11_elems { + u8 *ie_start; + size_t total_len; + + /* pointers to IEs */ + u8 *ssid; + u8 *supp_rates; + u8 *fh_params; + u8 *ds_params; + u8 *cf_params; + struct ieee80211_tim_ie *tim; + u8 *ibss_params; + u8 *challenge; + u8 *wpa; + u8 *rsn; + u8 *erp_info; + u8 *ext_supp_rates; + u8 *wmm_info; + u8 *wmm_param; + struct ieee80211_ht_cap *ht_cap_elem; + struct ieee80211_ht_info *ht_info_elem; + struct ieee80211_meshconf_ie *mesh_config; + u8 *mesh_id; + u8 *peering; + u8 *preq; + u8 *prep; + u8 *perr; + struct ieee80211_rann_ie *rann; + u8 *ch_switch_elem; + u8 *country_elem; + u8 *pwr_constr_elem; + u8 *quiet_elem; /* first quite element */ + u8 *timeout_int; + + /* length of them, respectively */ + u8 ssid_len; + u8 supp_rates_len; + u8 fh_params_len; + u8 ds_params_len; + u8 cf_params_len; + u8 tim_len; + u8 ibss_params_len; + u8 challenge_len; + u8 wpa_len; + u8 rsn_len; + u8 erp_info_len; + u8 ext_supp_rates_len; + u8 wmm_info_len; + u8 wmm_param_len; + u8 mesh_id_len; + u8 peering_len; + u8 preq_len; + u8 prep_len; + u8 perr_len; + u8 ch_switch_elem_len; + u8 country_elem_len; + u8 pwr_constr_elem_len; + u8 quiet_elem_len; + u8 num_of_quiet_elem; /* can be more the one */ + u8 timeout_int_len; +}; + /** * ieee80211_get_hdrlen_from_skb - get header length from data * @@ -2324,6 +2497,24 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); /** + * cfg80211_find_vendor_ie - find vendor specific information element in data + * + * @oui: vendor OUI + * @oui_type: vendor-specific OUI type + * @ies: data consisting of IEs + * @len: length of data + * + * This function will return %NULL if the vendor specific element ID + * could not be found or if the element is invalid (claims to be + * longer than the given data), or a pointer to the first byte + * of the requested element, that is the byte containing the + * element ID. There are no checks on the element length + * other than having to fit into the given data. + */ +const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, + const u8 *ies, int len); + +/** * DOC: Regulatory enforcement infrastructure * * TODO @@ -2398,113 +2589,6 @@ extern int freq_reg_info(struct wiphy *wiphy, const struct ieee80211_reg_rule **reg_rule); /* - * Temporary wext handlers & helper functions - * - * In the future cfg80211 will simply assign the entire wext handler - * structure to netdevs it manages, but we're not there yet. - */ -int cfg80211_wext_giwname(struct net_device *dev, - struct iw_request_info *info, - char *name, char *extra); -int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info, - u32 *mode, char *extra); -int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info, - u32 *mode, char *extra); -int cfg80211_wext_siwscan(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); -int cfg80211_wext_giwscan(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra); -int cfg80211_wext_siwmlme(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra); -int cfg80211_wext_giwrange(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra); -int cfg80211_wext_siwgenie(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra); -int cfg80211_wext_siwauth(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *data, char *extra); -int cfg80211_wext_giwauth(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *data, char *extra); - -int cfg80211_wext_siwfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *freq, char *extra); -int cfg80211_wext_giwfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *freq, char *extra); -int cfg80211_wext_siwessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *ssid); -int cfg80211_wext_giwessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *ssid); -int cfg80211_wext_siwrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rate, char *extra); -int cfg80211_wext_giwrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rate, char *extra); - -int cfg80211_wext_siwrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rts, char *extra); -int cfg80211_wext_giwrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rts, char *extra); -int cfg80211_wext_siwfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frag, char *extra); -int cfg80211_wext_giwfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frag, char *extra); -int cfg80211_wext_siwretry(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *retry, char *extra); -int cfg80211_wext_giwretry(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *retry, char *extra); -int cfg80211_wext_siwencodeext(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, char *extra); -int cfg80211_wext_siwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, char *keybuf); -int cfg80211_wext_giwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, char *keybuf); -int cfg80211_wext_siwtxpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *data, char *keybuf); -int cfg80211_wext_giwtxpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *data, char *keybuf); -struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev); - -int cfg80211_wext_siwpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *wrq, char *extra); -int cfg80211_wext_giwpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *wrq, char *extra); - -int cfg80211_wext_siwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, char *extra); -int cfg80211_wext_giwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, char *extra); - -int cfg80211_wext_siwpmksa(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, char *extra); - -/* * callbacks for asynchronous cfg80211 methods, notification * functions and BSS handling helpers */ @@ -3090,6 +3174,17 @@ void cfg80211_cqm_pktloss_notify(struct net_device *dev, void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, const u8 *replay_ctr, gfp_t gfp); +/** + * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate + * @dev: network device + * @index: candidate index (the smaller the index, the higher the priority) + * @bssid: BSSID of AP + * @preauth: Whether AP advertises support for RSN pre-authentication + * @gfp: allocation flags + */ +void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, + const u8 *bssid, bool preauth, gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |