diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 196 |
1 files changed, 128 insertions, 68 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e5f085c8922..970da442067 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -281,9 +281,13 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames + * @macaddr: address to use for this virtual interface. This will only + * be used for non-netdevice interfaces. If this parameter is set + * to zero address the driver may determine the address as needed. */ struct vif_params { int use_4addr; + u8 macaddr[ETH_ALEN]; }; /** @@ -326,7 +330,7 @@ struct cfg80211_chan_def { * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * - * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * Return: The old channel type (NOHT, HT20, HT40+/-) from a given * chandef, which must have a bandwidth allowing this conversion. */ static inline enum nl80211_channel_type @@ -364,7 +368,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %true if the channels defined by the channel definitions are + * Return: %true if the channels defined by the channel definitions are * identical, %false otherwise. */ static inline bool @@ -382,7 +386,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %NULL if the given channel definitions are incompatible, + * Return: %NULL if the given channel definitions are incompatible, * chandef1 or chandef2 otherwise. */ const struct cfg80211_chan_def * @@ -392,6 +396,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check + * Return: %true if the channel definition is valid. %false otherwise. */ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); @@ -399,7 +404,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); * cfg80211_chandef_usable - check if secondary channels can be used * @wiphy: the wiphy to validate against * @chandef: the channel definition to check - * @prohibited_flags: the regulatory chanenl flags that must not be set + * @prohibited_flags: the regulatory channel flags that must not be set + * Return: %true if secondary channels are usable. %false otherwise. */ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, @@ -608,6 +614,8 @@ enum station_parameters_apply_mask { * @sta_modify_mask: bitmap indicating which parameters changed * (for those that don't have a natural "no change" value), * see &enum station_parameters_apply_mask + * @local_pm: local link-specific mesh power save mode (no change when set + * to unknown) */ struct station_parameters { u8 *supported_rates; @@ -623,6 +631,7 @@ struct station_parameters { struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; + enum nl80211_mesh_power_mode local_pm; }; /** @@ -653,6 +662,9 @@ struct station_parameters { * @STATION_INFO_STA_FLAGS: @sta_flags filled * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled * @STATION_INFO_T_OFFSET: @t_offset filled + * @STATION_INFO_LOCAL_PM: @local_pm filled + * @STATION_INFO_PEER_PM: @peer_pm filled + * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -676,6 +688,9 @@ enum station_info_flags { STATION_INFO_STA_FLAGS = 1<<18, STATION_INFO_BEACON_LOSS_COUNT = 1<<19, STATION_INFO_T_OFFSET = 1<<20, + STATION_INFO_LOCAL_PM = 1<<21, + STATION_INFO_PEER_PM = 1<<22, + STATION_INFO_NONPEER_PM = 1<<23, }; /** @@ -789,6 +804,9 @@ struct sta_bss_parameters { * @sta_flags: station flags mask & values * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @local_pm: local mesh STA power save mode + * @peer_pm: peer mesh STA power save mode + * @nonpeer_pm: non-peer mesh STA power save mode */ struct station_info { u32 filled; @@ -818,6 +836,9 @@ struct station_info { u32 beacon_loss_count; s64 t_offset; + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; /* * Note: Add a new enum station_info_flags value for each new field and @@ -993,6 +1014,10 @@ struct bss_parameters { * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) * during which a mesh STA can send only one Action frame containing * a PREQ element for root path confirmation. + * @power_mode: The default mesh power save mode which will be the initial + * setting for new peer links. + * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake + * after transmitting its beacon. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1020,6 +1045,8 @@ struct mesh_config { u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; u16 dot11MeshHWMPconfirmationInterval; + enum nl80211_mesh_power_mode power_mode; + u16 dot11MeshAwakeWindowDuration; }; /** @@ -1034,6 +1061,8 @@ struct mesh_config { * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication * @is_secure: this mesh uses security + * @dtim_period: DTIM period to use + * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * * These parameters are fixed when the mesh is created. @@ -1049,6 +1078,8 @@ struct mesh_setup { u8 ie_len; bool is_authenticated; bool is_secure; + u8 dtim_period; + u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; }; @@ -1266,7 +1297,7 @@ struct cfg80211_bss { * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. - * Returns %NULL if not found. + * Return: %NULL if not found. */ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); @@ -1434,6 +1465,7 @@ struct cfg80211_ibss_params { * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used + * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication @@ -1454,6 +1486,7 @@ struct cfg80211_connect_params { u8 *ie; size_t ie_len; bool privacy; + enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; @@ -2092,6 +2125,7 @@ struct ieee80211_iface_limit { * @beacon_int_infra_match: In this combination, the beacon intervals * between infrastructure and AP types must match. This is required * only in special cases. + * @radar_detect_widths: bitmap of channel widths supported for radar detection * * These examples can be expressed as follows: * @@ -2144,6 +2178,7 @@ struct ieee80211_iface_combination { u16 max_interfaces; u8 n_limits; bool beacon_int_infra_match; + u8 radar_detect_widths; }; struct mac_address { @@ -2364,8 +2399,8 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ @@ -2409,6 +2444,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) * wiphy_priv - return priv from wiphy * * @wiphy: the wiphy whose priv pointer to return + * Return: The priv of @wiphy. */ static inline void *wiphy_priv(struct wiphy *wiphy) { @@ -2420,6 +2456,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy) * priv_to_wiphy - return the wiphy containing the priv * * @priv: a pointer previously returned by wiphy_priv + * Return: The wiphy of @priv. */ static inline struct wiphy *priv_to_wiphy(void *priv) { @@ -2442,6 +2479,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) * wiphy_dev - get wiphy dev pointer * * @wiphy: The wiphy whose device struct to look up + * Return: The dev of @wiphy. */ static inline struct device *wiphy_dev(struct wiphy *wiphy) { @@ -2452,6 +2490,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy) * wiphy_name - get wiphy name * * @wiphy: The wiphy whose name to return + * Return: The name of @wiphy. */ static inline const char *wiphy_name(const struct wiphy *wiphy) { @@ -2467,8 +2506,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * - * The returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. */ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); @@ -2477,7 +2516,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); * * @wiphy: The wiphy to register. * - * Returns a non-negative wiphy index or a negative error code. + * Return: A non-negative wiphy index or a negative error code. */ extern int wiphy_register(struct wiphy *wiphy); @@ -2626,6 +2665,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev) * wdev_priv - return wiphy priv from wireless_dev * * @wdev: The wireless device whose wiphy's priv pointer to return + * Return: The wiphy priv of @wdev. */ static inline void *wdev_priv(struct wireless_dev *wdev) { @@ -2643,12 +2683,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev) * ieee80211_channel_to_frequency - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap + * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); /** * ieee80211_frequency_to_channel - convert frequency to channel number * @freq: center frequency + * Return: The corresponding channel, or 0 if the conversion failed. */ extern int ieee80211_frequency_to_channel(int freq); @@ -2665,6 +2707,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, * ieee80211_get_channel - get channel struct from wiphy for specified frequency * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency of the channel + * Return: The channel struct from @wiphy at @freq. */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) @@ -2679,10 +2722,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) * @basic_rates: bitmap of basic rates * @bitrate: the bitrate for which to find the basic rate * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. + * Return: The basic rate corresponding to a given bitrate, that + * is the next lower bitrate contained in the basic rate map, + * which is, for this function, given as a bitmap of indices of + * rates in the band's bitrate table. */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, @@ -2775,18 +2818,21 @@ extern const unsigned char bridge_tunnel_header[6]; /** * ieee80211_get_hdrlen_from_skb - get header length from data * + * @skb: the frame + * * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. + * returns the 802.11 header length. * - * @skb: the frame + * Return: The 802.11 header length in bytes (not including encryption + * headers). Or 0 if the data in the sk_buff is too short to contain a valid + * 802.11 header. */ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format + * Return: The header length in bytes. */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); @@ -2794,7 +2840,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); * ieee80211_get_mesh_hdrlen - get mesh extension header length * @meshhdr: the mesh extension header, only the flags field * (first byte) will be accessed - * Returns the length of the extension header, which is always at + * Return: The length of the extension header, which is always at * least 6 bytes and at most 18 if address 5 and 6 are present. */ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); @@ -2812,6 +2858,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @skb: the 802.11 data frame * @addr: the device MAC address * @iftype: the virtual interface type + * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype); @@ -2823,6 +2870,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * @iftype: the virtual interface type * @bssid: the network bssid (used only for iftype STATION and ADHOC) * @qos: build 802.11 QoS data frame + * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype, u8 *bssid, bool qos); @@ -2850,6 +2898,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame + * Return: The 802.1p/1d tag. */ unsigned int cfg80211_classify8021d(struct sk_buff *skb); @@ -2860,12 +2909,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the element ID could - * not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. */ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); @@ -2877,12 +2927,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the vendor specific element ID - * could not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the vendor specific element ID could not be found or if the + * element is invalid (claims to be longer than the given data), or a pointer to + * the first byte of the requested element, that is the byte containing the + * element ID. + * + * Note: There are no checks on the element length other than having to fit into + * the given data. */ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, const u8 *ies, int len); @@ -2915,6 +2966,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, * * Drivers should check the return value, its possible you can get * an -ENOMEM. + * + * Return: 0 on success. -ENOMEM. */ extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); @@ -2944,13 +2997,13 @@ extern void wiphy_apply_custom_regulatory( * it wants to follow we respect that unless a country IE has been received * and processed already. * - * When an error occurs, for example if no rule can be found, the return value - * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain - * the numeric return value. The numeric return value will be -ERANGE if we - * determine the given center_freq does not even have a regulatory rule for a - * frequency range in the center_freq's band. See freq_in_rule_band() for our - * current definition of a band -- this is purely subjective and right now it's - * 802.11 specific. + * Return: A valid pointer, or, when an error occurs, for example if no rule + * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to + * check and PTR_ERR() to obtain the numeric return value. The numeric return + * value will be -ERANGE if we determine the given center_freq does not even + * have a regulatory rule for a frequency range in the center_freq's band. + * See freq_in_rule_band() for our current definition of a band -- this is + * purely subjective and right now it's 802.11 specific. */ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, u32 center_freq); @@ -3000,7 +3053,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy); * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, @@ -3025,7 +3079,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, @@ -3302,16 +3357,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); * the testmode command. Since it is intended for a reply, calling * it outside of the @testmode_cmd operation is invalid. * - * The returned skb (or %NULL if any errors happen) is pre-filled - * with the wiphy index and set up in a way that any data that is - * put into the skb (with skb_put(), nla_put() or similar) will end - * up being within the %NL80211_ATTR_TESTDATA attribute, so all that - * needs to be done with the skb is adding data for the corresponding - * userspace tool which can then read that data out of the testdata - * attribute. You must not modify the skb in any other way. + * The returned skb is pre-filled with the wiphy index and set up in + * a way that any data that is put into the skb (with skb_put(), + * nla_put() or similar) will end up being within the + * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done + * with the skb is adding data for the corresponding userspace tool + * which can then read that data out of the testdata attribute. You + * must not modify the skb in any other way. * * When done, call cfg80211_testmode_reply() with the skb and return * its error code as the result of the @testmode_cmd operation. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen); @@ -3321,11 +3378,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_reply_skb() * - * Returns an error code or 0 on success, since calling this - * function will usually be the last thing before returning - * from the @testmode_cmd you should return the error code. - * Note that this function consumes the skb regardless of the - * return value. + * Since calling this function will usually be the last thing + * before returning from the @testmode_cmd you should return + * the error code. Note that this function consumes the skb + * regardless of the return value. + * + * Return: An error code or 0 on success. */ int cfg80211_testmode_reply(struct sk_buff *skb); @@ -3339,14 +3397,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb); * This function allocates and pre-fills an skb for an event on the * testmode multicast group. * - * The returned skb (or %NULL if any errors happen) is set up in the - * same way as with cfg80211_testmode_alloc_reply_skb() but prepared - * for an event. As there, you should simply add data to it that will - * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must - * not modify the skb in any other way. + * The returned skb is set up in the same way as with + * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As + * there, you should simply add data to it that will then end up in the + * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb + * in any other way. * * When done filling the skb, call cfg80211_testmode_event() with the * skb to send the event. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp); @@ -3527,13 +3587,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @len: length of the frame data * @gfp: context flags * - * Returns %true if a user space application has registered for this frame. + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + * + * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. - * - * This function is called whenever an Action frame is received for a station - * mode interface, but is not processed in kernel. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, gfp_t gfp); @@ -3625,7 +3685,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, * This function is used in AP mode (only!) to inform userspace that * a spurious class 3 frame was received, to be able to deauth the * sender. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_spurious_frame(struct net_device *dev, @@ -3641,7 +3701,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev, * an associated station sent a 4addr frame but that wasn't expected. * It is allowed and desirable to send this event only once for each * station to avoid event flooding. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, @@ -3679,8 +3739,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, * @wiphy: the wiphy * @chandef: the channel definition * - * This function returns true if there is no secondary channel or the secondary - * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) + * Return: %true if there is no secondary channel or the secondary channel(s) + * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); @@ -3750,9 +3810,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev); * The function finds a given P2P attribute in the (vendor) IEs and * copies its contents to the given buffer. * - * The return value is a negative error code (-%EILSEQ or -%ENOENT) if - * the data is malformed or the attribute can't be found (respectively), - * or the length of the found attribute (which can be zero). + * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is + * malformed or the attribute can't be found (respectively), or the + * length of the found attribute (which can be zero). */ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, |