diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 67 |
1 files changed, 48 insertions, 19 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b1f84b05c67..8c9ba44fb7c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1394,10 +1394,12 @@ struct cfg80211_scan_request { /** * struct cfg80211_match_set - sets of attributes to match * - * @ssid: SSID to be matched + * @ssid: SSID to be matched; may be zero-length for no match (RSSI only) + * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ struct cfg80211_match_set { struct cfg80211_ssid ssid; + s32 rssi_thold; }; /** @@ -1420,7 +1422,8 @@ struct cfg80211_match_set { * @dev: the interface * @scan_start: start time of the scheduled scan * @channels: channels to scan - * @rssi_thold: don't report scan results below this threshold (in s32 dBm) + * @min_rssi_thold: for drivers only supporting a single threshold, this + * contains the minimum over all matchsets */ struct cfg80211_sched_scan_request { struct cfg80211_ssid *ssids; @@ -1433,7 +1436,7 @@ struct cfg80211_sched_scan_request { u32 flags; struct cfg80211_match_set *match_sets; int n_match_sets; - s32 rssi_thold; + s32 min_rssi_thold; /* internal */ struct wiphy *wiphy; @@ -1701,8 +1704,14 @@ struct cfg80211_ibss_params { * * @channel: The channel to use or %NULL if not specified (auto-select based * on scan results) + * @channel_hint: The channel of the recommended BSS for initial connection or + * %NULL if not specified * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan * results) + * @bssid_hint: The recommended AP BSSID for initial connection to the BSS or + * %NULL if not specified. Unlike the @bssid parameter, the driver is + * allowed to ignore this @bssid_hint if it has knowledge of a better BSS + * to use. * @ssid: SSID * @ssid_len: Length of ssid in octets * @auth_type: Authentication type (algorithm) @@ -1725,11 +1734,13 @@ struct cfg80211_ibss_params { */ struct cfg80211_connect_params { struct ieee80211_channel *channel; - u8 *bssid; - u8 *ssid; + struct ieee80211_channel *channel_hint; + const u8 *bssid; + const u8 *bssid_hint; + const u8 *ssid; size_t ssid_len; enum nl80211_auth_type auth_type; - u8 *ie; + const u8 *ie; size_t ie_len; bool privacy; enum nl80211_mfp mfp; @@ -1768,6 +1779,7 @@ struct cfg80211_bitrate_mask { u32 legacy; u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; u16 vht_mcs[NL80211_VHT_NSS_MAX]; + enum nl80211_txrate_gi gi; } control[IEEE80211_NUM_BANDS]; }; /** @@ -2194,7 +2206,12 @@ struct cfg80211_qos_map { * @set_cqm_txe_config: Configure connection quality monitor TX error * thresholds. * @sched_scan_start: Tell the driver to start a scheduled scan. - * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. + * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This + * call must stop the scheduled scan and be ready for starting a new one + * before it returns, i.e. @sched_scan_start may be called immediately + * after that again and should not fail in that case. The driver should + * not call cfg80211_sched_scan_stopped() for a requested stop (when this + * method returns 0.) * * @mgmt_frame_register: Notify driver that a management frame type was * registered. Note that this callback may not sleep, and cannot run @@ -2453,7 +2470,8 @@ struct cfg80211_ops { int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, u8 *peer, u8 action_code, u8 dialog_token, - u16 status_code, const u8 *buf, size_t len); + u16 status_code, u32 peer_capability, + const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, u8 *peer, enum nl80211_tdls_operation oper); @@ -2598,9 +2616,12 @@ struct ieee80211_iface_limit { * only in special cases. * @radar_detect_widths: bitmap of channel widths supported for radar detection * - * These examples can be expressed as follows: + * With this structure the driver can describe which interface + * combinations it supports concurrently. + * + * Examples: * - * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: + * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: * * struct ieee80211_iface_limit limits1[] = { * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, @@ -2614,7 +2635,7 @@ struct ieee80211_iface_limit { * }; * * - * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: + * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: * * struct ieee80211_iface_limit limits2[] = { * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | @@ -2628,7 +2649,8 @@ struct ieee80211_iface_limit { * }; * * - * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. + * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. + * * This allows for an infrastructure connection and three P2P connections. * * struct ieee80211_iface_limit limits3[] = { @@ -2778,7 +2800,7 @@ struct wiphy_vendor_command { * @perm_addr: permanent MAC address of this device * @addr_mask: If the device supports multiple MAC addresses by masking, * set this to a mask with variable bits set to 1, e.g. if the last - * four bits are variable then set it to 00:...:00:0f. The actual + * four bits are variable then set it to 00-00-00-00-00-0f. The actual * variable bits shall be determined by the interfaces added, with * interfaces not matching the mask being rejected to be brought up. * @n_addresses: number of addresses in @addresses. @@ -2875,6 +2897,11 @@ struct wiphy_vendor_command { * @n_vendor_commands: number of vendor commands * @vendor_events: array of vendor events supported by the hardware * @n_vendor_events: number of vendor events + * + * @max_ap_assoc_sta: maximum number of associated stations supported in AP mode + * (including P2P GO) or 0 to indicate no such limit is advertised. The + * driver is allowed to advertise a theoretical limit that it can reach in + * some cases, but may not always reach. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2990,6 +3017,8 @@ struct wiphy { const struct nl80211_vendor_cmd_info *vendor_events; int n_vendor_commands, n_vendor_events; + u16 max_ap_assoc_sta; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3127,8 +3156,8 @@ struct cfg80211_cached_keys; * @identifier: (private) Identifier used in nl80211 to identify this * wireless device if it has no netdev * @current_bss: (private) Used by the internal configuration code - * @channel: (private) Used by the internal configuration code to track - * the user-set AP, monitor and WDS channel + * @chandef: (private) Used by the internal configuration code to track + * the user-set channel definition. * @preset_chandef: (private) Used by the internal configuration code to * track the channel to be used for AP later * @bssid: (private) Used by the internal configuration code @@ -3192,9 +3221,7 @@ struct wireless_dev { struct cfg80211_internal_bss *current_bss; /* associated / joined */ struct cfg80211_chan_def preset_chandef; - - /* for AP and mesh channel tracking */ - struct ieee80211_channel *channel; + struct cfg80211_chan_def chandef; bool ibss_fixed; bool ibss_dfs_possible; @@ -3876,6 +3903,7 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, * * @dev: network device * @bssid: the BSSID of the IBSS joined + * @channel: the channel of the IBSS joined * @gfp: allocation flags * * This function notifies cfg80211 that the device joined an IBSS or @@ -3885,7 +3913,8 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, * with the locally generated beacon -- this guarantees that there is * always a scan result for this IBSS. cfg80211 will handle the rest. */ -void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, + struct ieee80211_channel *channel, gfp_t gfp); /** * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate |