summaryrefslogtreecommitdiffstats
path: root/include/net/cfg80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r--include/net/cfg80211.h296
1 files changed, 227 insertions, 69 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2fd06c60ffb..2a7936d7851 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -25,6 +25,43 @@
#include <linux/wireless.h>
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
/*
* wireless hardware capability structures
*/
@@ -205,6 +242,21 @@ struct ieee80211_supported_band {
*/
/**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
* struct vif_params - describes virtual interface parameters
* @mesh_id: mesh ID to use
* @mesh_id_len: length of the mesh ID
@@ -241,12 +293,24 @@ struct key_params {
* enum survey_info_flags - survey information flags
*
* @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
+ * @SURVEY_INFO_IN_USE: channel is currently being used
+ * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
*
* Used by the driver to indicate which info in &struct survey_info
* it has filled in during the get_survey().
*/
enum survey_info_flags {
SURVEY_INFO_NOISE_DBM = 1<<0,
+ SURVEY_INFO_IN_USE = 1<<1,
+ SURVEY_INFO_CHANNEL_TIME = 1<<2,
+ SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
+ SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
+ SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
+ SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
};
/**
@@ -256,6 +320,11 @@ enum survey_info_flags {
* @filled: bitflag of flags from &enum survey_info_flags
* @noise: channel noise in dBm. This and all following fields are
* optional
+ * @channel_time: amount of time in ms the radio spent on the channel
+ * @channel_time_busy: amount of time the primary channel was sensed busy
+ * @channel_time_ext_busy: amount of time the extension channel was sensed busy
+ * @channel_time_rx: amount of time the radio spent receiving data
+ * @channel_time_tx: amount of time the radio spent transmitting data
*
* Used by dump_survey() to report back per-channel survey information.
*
@@ -264,6 +333,11 @@ enum survey_info_flags {
*/
struct survey_info {
struct ieee80211_channel *channel;
+ u64 channel_time;
+ u64 channel_time_busy;
+ u64 channel_time_ext_busy;
+ u64 channel_time_rx;
+ u64 channel_time_tx;
u32 filled;
s8 noise;
};
@@ -347,6 +421,9 @@ struct station_parameters {
* (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
* @STATION_INFO_RX_PACKETS: @rx_packets filled
* @STATION_INFO_TX_PACKETS: @tx_packets filled
+ * @STATION_INFO_TX_RETRIES: @tx_retries filled
+ * @STATION_INFO_TX_FAILED: @tx_failed filled
+ * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -359,6 +436,9 @@ enum station_info_flags {
STATION_INFO_TX_BITRATE = 1<<7,
STATION_INFO_RX_PACKETS = 1<<8,
STATION_INFO_TX_PACKETS = 1<<9,
+ STATION_INFO_TX_RETRIES = 1<<10,
+ STATION_INFO_TX_FAILED = 1<<11,
+ STATION_INFO_RX_DROP_MISC = 1<<12,
};
/**
@@ -408,6 +488,9 @@ struct rate_info {
* @txrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
* @tx_packets: packets transmitted to this station
+ * @tx_retries: cumulative retry counts
+ * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_dropped_misc: Dropped for un-specified reason.
* @generation: generation number for nl80211 dumps.
* This number should increase every time the list of stations
* changes, i.e. when a station is added or removed, so that
@@ -425,6 +508,9 @@ struct station_info {
struct rate_info txrate;
u32 rx_packets;
u32 tx_packets;
+ u32 tx_retries;
+ u32 tx_failed;
+ u32 rx_dropped_misc;
int generation;
};
@@ -570,8 +656,28 @@ struct ieee80211_txq_params {
/* from net/wireless.h */
struct wiphy;
-/* from net/ieee80211.h */
-struct ieee80211_channel;
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
/**
* struct cfg80211_ssid - SSID description
@@ -691,6 +797,10 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
* sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
* required to assume that the port is unauthorized until authorized by
* user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ * allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ * protocol frames.
*/
struct cfg80211_crypto_settings {
u32 wpa_versions;
@@ -700,6 +810,8 @@ struct cfg80211_crypto_settings {
int n_akm_suites;
u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
bool control_port;
+ __be16 control_port_ethertype;
+ bool control_port_no_encrypt;
};
/**
@@ -1020,7 +1132,7 @@ struct cfg80211_pmksa {
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
* This allows the operation to be terminated prior to timeout based on
* the duration value.
- * @action: Transmit an action frame
+ * @mgmt_tx: Transmit a management frame
*
* @testmode_cmd: run a test mode command
*
@@ -1035,6 +1147,9 @@ struct cfg80211_pmksa {
* allows the driver to adjust the dynamic ps timeout value.
* @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
*
+ * @mgmt_frame_register: Notify driver that a management frame type was
+ * registered. Note that this callback may not sleep, and cannot run
+ * concurrently with itself.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -1050,13 +1165,14 @@ struct cfg80211_ops {
struct vif_params *params);
int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, const u8 *mac_addr,
+ u8 key_index, bool pairwise, const u8 *mac_addr,
struct key_params *params);
int (*get_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, const u8 *mac_addr, void *cookie,
+ u8 key_index, bool pairwise, const u8 *mac_addr,
+ void *cookie,
void (*callback)(void *cookie, struct key_params*));
int (*del_key)(struct wiphy *wiphy, struct net_device *netdev,
- u8 key_index, const u8 *mac_addr);
+ u8 key_index, bool pairwise, const u8 *mac_addr);
int (*set_default_key)(struct wiphy *wiphy,
struct net_device *netdev,
u8 key_index);
@@ -1140,7 +1256,7 @@ struct cfg80211_ops {
int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
- u8 *addr);
+ const u8 *addr);
void (*rfkill_poll)(struct wiphy *wiphy);
@@ -1172,7 +1288,7 @@ struct cfg80211_ops {
struct net_device *dev,
u64 cookie);
- int (*action)(struct wiphy *wiphy, struct net_device *dev,
+ int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
bool channel_type_valid,
@@ -1184,6 +1300,10 @@ struct cfg80211_ops {
int (*set_cqm_rssi_config)(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_thold, u32 rssi_hyst);
+
+ void (*mgmt_frame_register)(struct wiphy *wiphy,
+ struct net_device *dev,
+ u16 frame_type, bool reg);
};
/*
@@ -1221,21 +1341,31 @@ struct cfg80211_ops {
* @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
* on a VLAN interface)
* @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
+ * control port protocol ethertype. The device also honours the
+ * control_port_no_encrypt flag.
+ * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
*/
enum wiphy_flags {
- WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
- WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
- WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
- WIPHY_FLAG_NETNS_OK = BIT(3),
- WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
- WIPHY_FLAG_4ADDR_AP = BIT(5),
- WIPHY_FLAG_4ADDR_STATION = BIT(6),
+ WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
+ WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
+ WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ WIPHY_FLAG_NETNS_OK = BIT(3),
+ WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
+ WIPHY_FLAG_4ADDR_AP = BIT(5),
+ WIPHY_FLAG_4ADDR_STATION = BIT(6),
+ WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
+ WIPHY_FLAG_IBSS_RSN = BIT(7),
};
struct mac_address {
u8 addr[ETH_ALEN];
};
+struct ieee80211_txrx_stypes {
+ u16 tx, rx;
+};
+
/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback
@@ -1286,6 +1416,10 @@ struct mac_address {
* @privid: a pointer that drivers can use to identify if an arbitrary
* wiphy is theirs, e.g. in global notifiers
* @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ * transmitted through nl80211, points to an array indexed by interface
+ * type
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1294,9 +1428,12 @@ struct wiphy {
u8 perm_addr[ETH_ALEN];
u8 addr_mask[ETH_ALEN];
- u16 n_addresses;
struct mac_address *addresses;
+ const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+ u16 n_addresses;
+
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
@@ -1492,8 +1629,8 @@ struct cfg80211_cached_keys;
* set by driver (if supported) on add_interface BEFORE registering the
* netdev and may otherwise be used by driver read-only, will be update
* by cfg80211 on change_interface
- * @action_registrations: list of registrations for action frames
- * @action_registrations_lock: lock for the list
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
* @mtx: mutex used to lock data in this struct
* @cleanup_work: work struct used for cleanup that can't be done directly
*/
@@ -1505,8 +1642,8 @@ struct wireless_dev {
struct list_head list;
struct net_device *netdev;
- struct list_head action_registrations;
- spinlock_t action_registrations_lock;
+ struct list_head mgmt_registrations;
+ spinlock_t mgmt_registrations_lock;
struct mutex mtx;
@@ -1563,8 +1700,10 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
return wiphy_priv(wdev->wiphy);
}
-/*
- * Utility functions
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
*/
/**
@@ -1715,7 +1854,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
* ieee80211_hdrlen - get header length in bytes from frame control
* @fc: frame control field in little-endian format
*/
-unsigned int ieee80211_hdrlen(__le16 fc);
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
/**
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -1777,8 +1924,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
*/
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
-/*
- * Regulatory helper functions for wiphys
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
*/
/**
@@ -2181,6 +2330,20 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
/**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
* wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
* @wiphy: the wiphy
* @blocked: block status
@@ -2201,6 +2364,17 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
#ifdef CONFIG_NL80211_TESTMODE
/**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
* cfg80211_testmode_alloc_reply_skb - allocate testmode reply
* @wiphy: the wiphy
* @approxlen: an upper bound of the length of the data that will
@@ -2373,38 +2547,39 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
/**
- * cfg80211_rx_action - notification of received, unprocessed Action frame
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
- * @buf: Action frame (header + body)
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
- * Returns %true if a user space application is responsible for rejecting the
- * unrecognized Action frame; %false if no such application is registered
- * (i.e., the driver is responsible for rejecting the unrecognized Action
- * frame)
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
*
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+ size_t len, gfp_t gfp);
/**
- * cfg80211_action_tx_status - notification of TX status for Action frame
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
* @dev: network device
- * @cookie: Cookie returned by cfg80211_ops::action()
- * @buf: Action frame (header + body)
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @ack: Whether frame was acknowledged
* @gfp: context flags
*
- * This function is called whenever an Action frame was requested to be
- * transmitted with cfg80211_ops::action() to report the TX status of the
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
* transmission attempt.
*/
-void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
- const u8 *buf, size_t len, bool ack, gfp_t gfp);
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+ const u8 *buf, size_t len, bool ack, gfp_t gfp);
/**
@@ -2420,56 +2595,41 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
enum nl80211_cqm_rssi_threshold_event rssi_event,
gfp_t gfp);
-#ifdef __KERNEL__
-
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
#define wiphy_printk(level, wiphy, format, args...) \
- printk(level "%s: " format, wiphy_name(wiphy), ##args)
+ dev_printk(level, &(wiphy)->dev, format, ##args)
#define wiphy_emerg(wiphy, format, args...) \
- wiphy_printk(KERN_EMERG, wiphy, format, ##args)
+ dev_emerg(&(wiphy)->dev, format, ##args)
#define wiphy_alert(wiphy, format, args...) \
- wiphy_printk(KERN_ALERT, wiphy, format, ##args)
+ dev_alert(&(wiphy)->dev, format, ##args)
#define wiphy_crit(wiphy, format, args...) \
- wiphy_printk(KERN_CRIT, wiphy, format, ##args)
+ dev_crit(&(wiphy)->dev, format, ##args)
#define wiphy_err(wiphy, format, args...) \
- wiphy_printk(KERN_ERR, wiphy, format, ##args)
+ dev_err(&(wiphy)->dev, format, ##args)
#define wiphy_warn(wiphy, format, args...) \
- wiphy_printk(KERN_WARNING, wiphy, format, ##args)
+ dev_warn(&(wiphy)->dev, format, ##args)
#define wiphy_notice(wiphy, format, args...) \
- wiphy_printk(KERN_NOTICE, wiphy, format, ##args)
+ dev_notice(&(wiphy)->dev, format, ##args)
#define wiphy_info(wiphy, format, args...) \
- wiphy_printk(KERN_INFO, wiphy, format, ##args)
+ dev_info(&(wiphy)->dev, format, ##args)
-int wiphy_debug(const struct wiphy *wiphy, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-
-#if defined(DEBUG)
-#define wiphy_dbg(wiphy, format, args...) \
+#define wiphy_debug(wiphy, format, args...) \
wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+
#define wiphy_dbg(wiphy, format, args...) \
- dynamic_pr_debug("%s: " format, wiphy_name(wiphy), ##args)
-#else
-#define wiphy_dbg(wiphy, format, args...) \
-({ \
- if (0) \
- wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \
- 0; \
-})
-#endif
+ dev_dbg(&(wiphy)->dev, format, ##args)
#if defined(VERBOSE_DEBUG)
#define wiphy_vdbg wiphy_dbg
#else
-
#define wiphy_vdbg(wiphy, format, args...) \
({ \
if (0) \
wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \
- 0; \
+ 0; \
})
#endif
@@ -2481,6 +2641,4 @@ int wiphy_debug(const struct wiphy *wiphy, const char *format, ...)
#define wiphy_WARN(wiphy, format, args...) \
WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args);
-#endif
-
#endif /* __NET_CFG80211_H */