diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 115 |
1 files changed, 53 insertions, 62 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6dd19593e33..6a43c34ce96 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1124,6 +1124,9 @@ struct bss_parameters { * setting for new peer links. * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake * after transmitting its beacon. + * @plink_timeout: If no tx activity is seen from a STA we've established + * peering with for longer than this time (in seconds), then remove it + * from the STA's list of peers. Default is 30 minutes. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1153,6 +1156,7 @@ struct mesh_config { u16 dot11MeshHWMPconfirmationInterval; enum nl80211_mesh_power_mode power_mode; u16 dot11MeshAwakeWindowDuration; + u32 plink_timeout; }; /** @@ -1172,6 +1176,7 @@ struct mesh_config { * @dtim_period: DTIM period to use * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] + * @basic_rates: basic rates to use when creating the mesh * * These parameters are fixed when the mesh is created. */ @@ -1191,6 +1196,7 @@ struct mesh_setup { u8 dtim_period; u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; + u32 basic_rates; }; /** @@ -2654,7 +2660,7 @@ struct wiphy { u32 hw_version; #ifdef CONFIG_PM - struct wiphy_wowlan_support wowlan; + const struct wiphy_wowlan_support *wowlan; struct cfg80211_wowlan *wowlan_config; #endif @@ -2853,7 +2859,7 @@ struct cfg80211_cached_keys; * @current_bss: (private) Used by the internal configuration code * @channel: (private) Used by the internal configuration code to track * the user-set AP, monitor and WDS channel - * @preset_chan: (private) Used by the internal configuration code to + * @preset_chandef: (private) Used by the internal configuration code to * track the channel to be used for AP later * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code @@ -2875,6 +2881,15 @@ struct cfg80211_cached_keys; * @p2p_started: true if this is a P2P Device that has been started * @cac_started: true if DFS channel availability check has been started * @cac_start_time: timestamp (jiffies) when the dfs state was entered. + * @ps: powersave mode is enabled + * @ps_timeout: dynamic powersave timeout + * @ap_unexpected_nlportid: (private) netlink port ID of application + * registered for unexpected class 3 frames (AP mode) + * @conn: (private) cfg80211 software SME connection state machine data + * @connect_keys: (private) keys to set after connection is established + * @ibss_fixed: (private) IBSS is using fixed BSSID + * @event_list: (private) list for internal event processing + * @event_lock: (private) lock for event list */ struct wireless_dev { struct wiphy *wiphy; @@ -2898,11 +2913,6 @@ struct wireless_dev { /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len, mesh_id_len, mesh_id_up_len; - enum { - CFG80211_SME_IDLE, - CFG80211_SME_CONNECTING, - CFG80211_SME_CONNECTED, - } sme_state; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; @@ -3432,59 +3442,66 @@ void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** - * cfg80211_send_rx_auth - notification of processed authentication + * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame * @dev: network device * @buf: authentication frame (header + body) * @len: length of the frame data * - * This function is called whenever an authentication has been processed in - * station mode. The driver is required to call either this function or - * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() - * call. This function may sleep. The caller must hold the corresponding wdev's - * mutex. + * This function is called whenever an authentication, disassociation or + * deauthentication frame has been received and processed in station mode. + * After being asked to authenticate via cfg80211_ops::auth() the driver must + * call either this function or cfg80211_auth_timeout(). + * After being asked to associate via cfg80211_ops::assoc() the driver must + * call either this function or cfg80211_auth_timeout(). + * While connected, the driver must calls this for received and processed + * disassociation and deauthentication frames. If the frame couldn't be used + * because it was unprotected, the driver must call the function + * cfg80211_rx_unprot_mlme_mgmt() instead. + * + * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_auth_timeout - notification of timed out authentication + * cfg80211_auth_timeout - notification of timed out authentication * @dev: network device * @addr: The MAC address of the device with which the authentication timed out * * This function may sleep. The caller must hold the corresponding wdev's * mutex. */ -void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); /** - * cfg80211_send_rx_assoc - notification of processed association + * cfg80211_rx_assoc_resp - notification of processed association response * @dev: network device - * @bss: the BSS struct association was requested for, the struct reference - * is owned by cfg80211 after this call - * @buf: (re)association response frame (header + body) + * @bss: the BSS that association was requested with, ownership of the pointer + * moves to cfg80211 in this call + * @buf: authentication frame (header + body) * @len: length of the frame data * - * This function is called whenever a (re)association response has been - * processed in station mode. The driver is required to call either this - * function or cfg80211_send_assoc_timeout() to indicate the result of - * cfg80211_ops::assoc() call. This function may sleep. The caller must hold - * the corresponding wdev's mutex. + * After being asked to associate via cfg80211_ops::assoc() the driver must + * call either this function or cfg80211_auth_timeout(). + * + * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, +void cfg80211_rx_assoc_resp(struct net_device *dev, + struct cfg80211_bss *bss, const u8 *buf, size_t len); /** - * cfg80211_send_assoc_timeout - notification of timed out association + * cfg80211_assoc_timeout - notification of timed out association * @dev: network device * @addr: The MAC address of the device with which the association timed out * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_assoc_timeout(struct net_device *dev, const u8 *addr); /** - * cfg80211_send_deauth - notification of processed deauthentication + * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame * @dev: network device - * @buf: deauthentication frame (header + body) + * @buf: 802.11 frame (header + body) * @len: length of the frame data * * This function is called whenever deauthentication has been processed in @@ -3492,46 +3509,20 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); * locally generated ones. This function may sleep. The caller must hold the * corresponding wdev's mutex. */ -void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); - -/** - * cfg80211_send_disassoc - notification of processed disassociation - * @dev: network device - * @buf: disassociation response frame (header + body) - * @len: length of the frame data - * - * This function is called whenever disassociation has been processed in - * station mode. This includes both received disassociation frames and locally - * generated ones. This function may sleep. The caller must hold the - * corresponding wdev's mutex. - */ -void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_unprot_deauth - notification of unprotected deauthentication + * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data * - * This function is called whenever a received Deauthentication frame has been - * dropped in station mode because of MFP being used but the Deauthentication - * frame was not protected. This function may sleep. - */ -void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, - size_t len); - -/** - * cfg80211_send_unprot_disassoc - notification of unprotected disassociation - * @dev: network device - * @buf: disassociation frame (header + body) - * @len: length of the frame data - * - * This function is called whenever a received Disassociation frame has been - * dropped in station mode because of MFP being used but the Disassociation + * This function is called whenever a received deauthentication or dissassoc + * frame has been dropped in station mode because of MFP being used but the * frame was not protected. This function may sleep. */ -void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, + const u8 *buf, size_t len); /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) |