diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 323 |
1 files changed, 281 insertions, 42 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3eae46cb1ac..b1f84b05c67 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -91,9 +91,8 @@ enum ieee80211_band { * Channel flags set by the regulatory control code. * * @IEEE80211_CHAN_DISABLED: This channel is disabled. - * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted - * on this channel. - * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes + * sending probe requests or beaconing. * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel * is not permitted. @@ -113,8 +112,8 @@ enum ieee80211_band { */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, - IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_NO_IR = 1<<1, + /* hole at 1<<2 */ IEEE80211_CHAN_RADAR = 1<<3, IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, @@ -748,6 +747,8 @@ enum station_parameters_apply_mask { * @supported_channels_len: number of supported channels * @supported_oper_classes: supported oper classes in IEEE 802.11 format * @supported_oper_classes_len: number of supported operating classes + * @opmode_notif: operating mode field from Operating Mode Notification + * @opmode_notif_used: information if operating mode field is used */ struct station_parameters { const u8 *supported_rates; @@ -771,6 +772,8 @@ struct station_parameters { u8 supported_channels_len; const u8 *supported_oper_classes; u8 supported_oper_classes_len; + u8 opmode_notif; + bool opmode_notif_used; }; /** @@ -1763,7 +1766,8 @@ enum wiphy_params_flags { struct cfg80211_bitrate_mask { struct { u32 legacy; - u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; + u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; + u16 vht_mcs[NL80211_VHT_NSS_MAX]; } control[IEEE80211_NUM_BANDS]; }; /** @@ -1945,6 +1949,73 @@ struct cfg80211_update_ft_ies_params { }; /** + * struct cfg80211_mgmt_tx_params - mgmt tx parameters + * + * This structure provides information needed to transmit a mgmt frame + * + * @chan: channel to use + * @offchan: indicates wether off channel operation is required + * @wait: duration for ROC + * @buf: buffer to transmit + * @len: buffer length + * @no_cck: don't use cck rates for this frame + * @dont_wait_for_ack: tells the low level not to wait for an ack + */ +struct cfg80211_mgmt_tx_params { + struct ieee80211_channel *chan; + bool offchan; + unsigned int wait; + const u8 *buf; + size_t len; + bool no_cck; + bool dont_wait_for_ack; +}; + +/** + * struct cfg80211_dscp_exception - DSCP exception + * + * @dscp: DSCP value that does not adhere to the user priority range definition + * @up: user priority value to which the corresponding DSCP value belongs + */ +struct cfg80211_dscp_exception { + u8 dscp; + u8 up; +}; + +/** + * struct cfg80211_dscp_range - DSCP range definition for user priority + * + * @low: lowest DSCP value of this user priority range, inclusive + * @high: highest DSCP value of this user priority range, inclusive + */ +struct cfg80211_dscp_range { + u8 low; + u8 high; +}; + +/* QoS Map Set element length defined in IEEE Std 802.11-2012, 8.4.2.97 */ +#define IEEE80211_QOS_MAP_MAX_EX 21 +#define IEEE80211_QOS_MAP_LEN_MIN 16 +#define IEEE80211_QOS_MAP_LEN_MAX \ + (IEEE80211_QOS_MAP_LEN_MIN + 2 * IEEE80211_QOS_MAP_MAX_EX) + +/** + * struct cfg80211_qos_map - QoS Map Information + * + * This struct defines the Interworking QoS map setting for DSCP values + * + * @num_des: number of DSCP exceptions (0..21) + * @dscp_exception: optionally up to maximum of 21 DSCP exceptions from + * the user priority DSCP range definition + * @up: DSCP range definition for a particular user priority + */ +struct cfg80211_qos_map { + u8 num_des; + struct cfg80211_dscp_exception dscp_exception[IEEE80211_QOS_MAP_MAX_EX]; + struct cfg80211_dscp_range up[8]; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2186,6 +2257,8 @@ struct cfg80211_update_ft_ies_params { * @set_coalesce: Set coalesce parameters. * * @channel_switch: initiate channel-switch procedure (with CSA) + * + * @set_qos_map: Set QoS mapping information to the driver */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2342,9 +2415,8 @@ struct cfg80211_ops { u64 cookie); int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, - struct ieee80211_channel *chan, bool offchan, - unsigned int wait, const u8 *buf, size_t len, - bool no_cck, bool dont_wait_for_ack, u64 *cookie); + struct cfg80211_mgmt_tx_params *params, + u64 *cookie); int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, struct wireless_dev *wdev, u64 cookie); @@ -2428,6 +2500,9 @@ struct cfg80211_ops { int (*channel_switch)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_csa_settings *params); + int (*set_qos_map)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_qos_map *qos_map); }; /* @@ -2438,27 +2513,6 @@ struct cfg80211_ops { /** * enum wiphy_flags - wiphy capability flags * - * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device - * has its own custom regulatory domain and cannot identify the - * ISO / IEC 3166 alpha2 it belongs to. When this is enabled - * we will disregard the first regulatory hint (when the - * initiator is %REGDOM_SET_BY_CORE). - * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will - * ignore regulatory domain settings until it gets its own regulatory - * domain via its regulatory_hint() unless the regulatory hint is - * from a country IE. After its gets its own regulatory domain it will - * only allow further regulatory domain settings to further enhance - * compliance. For example if channel 13 and 14 are disabled by this - * regulatory domain no user regulatory domain can enable these channels - * at a later time. This can be used for devices which do not have - * calibration information guaranteed for frequencies or settings - * outside of its regulatory domain. If used in combination with - * WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings - * will be followed. - * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure - * that passive scan flags and beaconing flags may not be lifted by - * cfg80211 due to regulatory beacon hints. For more information on beacon - * hints read the documenation for regulatory_hint_found_beacon() * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this * wiphy at all * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled @@ -2497,9 +2551,9 @@ struct cfg80211_ops { * beaconing mode (AP, IBSS, Mesh, ...). */ enum wiphy_flags { - WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), - WIPHY_FLAG_STRICT_REGULATORY = BIT(1), - WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + /* use hole at 0 */ + /* use hole at 1 */ + /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), WIPHY_FLAG_4ADDR_AP = BIT(5), @@ -2676,6 +2730,34 @@ struct wiphy_coalesce_support { }; /** + * enum wiphy_vendor_command_flags - validation flags for vendor commands + * @WIPHY_VENDOR_CMD_NEED_WDEV: vendor command requires wdev + * @WIPHY_VENDOR_CMD_NEED_NETDEV: vendor command requires netdev + * @WIPHY_VENDOR_CMD_NEED_RUNNING: interface/wdev must be up & running + * (must be combined with %_WDEV or %_NETDEV) + */ +enum wiphy_vendor_command_flags { + WIPHY_VENDOR_CMD_NEED_WDEV = BIT(0), + WIPHY_VENDOR_CMD_NEED_NETDEV = BIT(1), + WIPHY_VENDOR_CMD_NEED_RUNNING = BIT(2), +}; + +/** + * struct wiphy_vendor_command - vendor command definition + * @info: vendor command identifying information, as used in nl80211 + * @flags: flags, see &enum wiphy_vendor_command_flags + * @doit: callback for the operation, note that wdev is %NULL if the + * flags didn't ask for a wdev and non-%NULL otherwise; the data + * pointer may be %NULL if userspace provided no data at all + */ +struct wiphy_vendor_command { + struct nl80211_vendor_cmd_info info; + u32 flags; + int (*doit)(struct wiphy *wiphy, struct wireless_dev *wdev, + const void *data, int data_len); +}; + +/** * struct wiphy - wireless hardware description * @reg_notifier: the driver's regulatory notification callback, * note that if your driver uses wiphy_apply_custom_regulatory() @@ -2721,6 +2803,8 @@ struct wiphy_coalesce_support { * @software_iftypes: bitmask of software interface types, these are not * subject to any restrictions since they are purely managed in SW. * @flags: wiphy flags, see &enum wiphy_flags + * @regulatory_flags: wiphy regulatory flags, see + * &enum ieee80211_regulatory_flags * @features: features advertised to nl80211, see &enum nl80211_feature_flags. * @bss_priv_size: each BSS struct has private data allocated with it, * this variable determines its size @@ -2786,6 +2870,11 @@ struct wiphy_coalesce_support { * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities * @coalesce: packet coalescing support information + * + * @vendor_commands: array of vendor commands supported by the hardware + * @n_vendor_commands: number of vendor commands + * @vendor_events: array of vendor events supported by the hardware + * @n_vendor_events: number of vendor events */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2809,7 +2898,7 @@ struct wiphy { u16 max_acl_mac_addrs; - u32 flags, features; + u32 flags, regulatory_flags, features; u32 ap_sme_capa; @@ -2897,6 +2986,10 @@ struct wiphy { const struct wiphy_coalesce_support *coalesce; + const struct wiphy_vendor_command *vendor_commands; + const struct nl80211_vendor_cmd_info *vendor_events; + int n_vendor_commands, n_vendor_events; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3388,9 +3481,11 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame + * @qos_map: Interworking QoS mapping or %NULL if not in use * Return: The 802.1p/1d tag. */ -unsigned int cfg80211_classify8021d(struct sk_buff *skb); +unsigned int cfg80211_classify8021d(struct sk_buff *skb, + struct cfg80211_qos_map *qos_map); /** * cfg80211_find_ie - find information element in data @@ -3472,6 +3567,9 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2); * custom regulatory domain will be trusted completely and as such previous * default channel settings will be disregarded. If no rule is found for a * channel on the regulatory domain the channel will be disabled. + * Drivers using this for a wiphy should also set the wiphy flag + * WIPHY_FLAG_CUSTOM_REGULATORY or cfg80211 will set it for the wiphy + * that called this helper. */ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, const struct ieee80211_regdomain *regd); @@ -3838,6 +3936,121 @@ void wiphy_rfkill_start_polling(struct wiphy *wiphy); */ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); +/** + * DOC: Vendor commands + * + * Occasionally, there are special protocol or firmware features that + * can't be implemented very openly. For this and similar cases, the + * vendor command functionality allows implementing the features with + * (typically closed-source) userspace and firmware, using nl80211 as + * the configuration mechanism. + * + * A driver supporting vendor commands must register them as an array + * in struct wiphy, with handlers for each one, each command has an + * OUI and sub command ID to identify it. + * + * Note that this feature should not be (ab)used to implement protocol + * features that could openly be shared across drivers. In particular, + * it must never be required to use vendor commands to implement any + * "normal" functionality that higher-level userspace like connection + * managers etc. need. + */ + +struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy, + enum nl80211_commands cmd, + enum nl80211_attrs attr, + int approxlen); + +struct sk_buff *__cfg80211_alloc_event_skb(struct wiphy *wiphy, + enum nl80211_commands cmd, + enum nl80211_attrs attr, + int vendor_event_idx, + int approxlen, gfp_t gfp); + +void __cfg80211_send_event_skb(struct sk_buff *skb, gfp_t gfp); + +/** + * cfg80211_vendor_cmd_alloc_reply_skb - allocate vendor command reply + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * + * This function allocates and pre-fills an skb for a reply to + * a vendor command. Since it is intended for a reply, calling + * it outside of a vendor command's doit() operation is invalid. + * + * The returned skb is pre-filled with some identifying data in + * a way that any data that is put into the skb (with skb_put(), + * nla_put() or similar) will end up being within the + * %NL80211_ATTR_VENDOR_DATA attribute, so all that needs to be done + * with the skb is adding data for the corresponding userspace tool + * which can then read that data out of the vendor data attribute. + * You must not modify the skb in any other way. + * + * When done, call cfg80211_vendor_cmd_reply() with the skb and return + * its error code as the result of the doit() operation. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. + */ +static inline struct sk_buff * +cfg80211_vendor_cmd_alloc_reply_skb(struct wiphy *wiphy, int approxlen) +{ + return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_VENDOR, + NL80211_ATTR_VENDOR_DATA, approxlen); +} + +/** + * cfg80211_vendor_cmd_reply - send the reply skb + * @skb: The skb, must have been allocated with + * cfg80211_vendor_cmd_alloc_reply_skb() + * + * Since calling this function will usually be the last thing + * before returning from the vendor command doit() you should + * return the error code. Note that this function consumes the + * skb regardless of the return value. + * + * Return: An error code or 0 on success. + */ +int cfg80211_vendor_cmd_reply(struct sk_buff *skb); + +/** + * cfg80211_vendor_event_alloc - allocate vendor-specific event skb + * @wiphy: the wiphy + * @event_idx: index of the vendor event in the wiphy's vendor_events + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * @gfp: allocation flags + * + * This function allocates and pre-fills an skb for an event on the + * vendor-specific multicast group. + * + * When done filling the skb, call cfg80211_vendor_event() with the + * skb to send the event. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. + */ +static inline struct sk_buff * +cfg80211_vendor_event_alloc(struct wiphy *wiphy, int approxlen, + int event_idx, gfp_t gfp) +{ + return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_VENDOR, + NL80211_ATTR_VENDOR_DATA, + event_idx, approxlen, gfp); +} + +/** + * cfg80211_vendor_event - send the event + * @skb: The skb, must have been allocated with cfg80211_vendor_event_alloc() + * @gfp: allocation flags + * + * This function sends the given @skb, which must have been allocated + * by cfg80211_vendor_event_alloc(), as an event. It always consumes it. + */ +static inline void cfg80211_vendor_event(struct sk_buff *skb, gfp_t gfp) +{ + __cfg80211_send_event_skb(skb, gfp); +} + #ifdef CONFIG_NL80211_TESTMODE /** * DOC: Test mode @@ -3873,8 +4086,12 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ -struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, - int approxlen); +static inline struct sk_buff * +cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen) +{ + return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_TESTMODE, + NL80211_ATTR_TESTDATA, approxlen); +} /** * cfg80211_testmode_reply - send the reply skb @@ -3888,7 +4105,10 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, * * Return: An error code or 0 on success. */ -int cfg80211_testmode_reply(struct sk_buff *skb); +static inline int cfg80211_testmode_reply(struct sk_buff *skb) +{ + return cfg80211_vendor_cmd_reply(skb); +} /** * cfg80211_testmode_alloc_event_skb - allocate testmode event @@ -3911,8 +4131,13 @@ int cfg80211_testmode_reply(struct sk_buff *skb); * * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ -struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, - int approxlen, gfp_t gfp); +static inline struct sk_buff * +cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp) +{ + return __cfg80211_alloc_event_skb(wiphy, NL80211_CMD_TESTMODE, + NL80211_ATTR_TESTDATA, -1, + approxlen, gfp); +} /** * cfg80211_testmode_event - send the event @@ -3924,7 +4149,10 @@ struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, * by cfg80211_testmode_alloc_event_skb(), as an event. It always * consumes it. */ -void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); +static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) +{ + __cfg80211_send_event_skb(skb, gfp); +} #define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), #define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd), @@ -4146,6 +4374,7 @@ void cfg80211_radar_event(struct wiphy *wiphy, /** * cfg80211_cac_event - Channel availability check (CAC) event * @netdev: network device + * @chandef: chandef for the current channel * @event: type of event * @gfp: context flags * @@ -4154,6 +4383,7 @@ void cfg80211_radar_event(struct wiphy *wiphy, * also by full-MAC drivers. */ void cfg80211_cac_event(struct net_device *netdev, + const struct cfg80211_chan_def *chandef, enum nl80211_radar_event event, gfp_t gfp); @@ -4279,7 +4509,8 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, * @dev: the device which switched channels * @chandef: the new channel definition * - * Acquires wdev_lock, so must only be called from sleepable driver context! + * Caller must acquire wdev_lock, therefore must only be called from sleepable + * driver context! */ void cfg80211_ch_switch_notify(struct net_device *dev, struct cfg80211_chan_def *chandef); @@ -4409,6 +4640,14 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, */ void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp); +/** + * ieee80211_get_num_supported_channels - get number of channels device has + * @wiphy: the wiphy + * + * Return: the number of channels supported by the device. + */ +unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |