summaryrefslogtreecommitdiffstats
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h66
1 files changed, 51 insertions, 15 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e1293c7e4d2..db7680acd0d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -145,11 +145,11 @@ struct ieee80211_low_level_stats {
/**
* enum ieee80211_chanctx_change - change flag for channel context
- * @IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE: The channel type was changed
+ * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
*/
enum ieee80211_chanctx_change {
- IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE = BIT(0),
+ IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
};
@@ -159,8 +159,7 @@ enum ieee80211_chanctx_change {
* This is the driver-visible part. The ieee80211_chanctx
* that contains it is visible in mac80211 only.
*
- * @channel: the channel to tune to
- * @channel_type: the channel (HT) type
+ * @def: the channel definition
* @rx_chains_static: The number of RX chains that must always be
* active on the channel to receive MIMO transmissions
* @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -170,8 +169,7 @@ enum ieee80211_chanctx_change {
* sizeof(void *), size is determined in hw information.
*/
struct ieee80211_chanctx_conf {
- struct ieee80211_channel *channel;
- enum nl80211_channel_type channel_type;
+ struct cfg80211_chan_def def;
u8 rx_chains_static, rx_chains_dynamic;
@@ -288,9 +286,8 @@ enum ieee80211_rssi_event {
* @mcast_rate: per-band multicast rate index + 1 (0: disabled)
* @bssid: The BSSID for this BSS
* @enable_beacon: whether beaconing should be enabled or not
- * @channel_type: Channel type for this BSS -- the hardware might be
- * configured for HT40+ while this BSS only uses no-HT, for
- * example.
+ * @chandef: Channel definition for this BSS -- the hardware might be
+ * configured a higher bandwidth than this BSS uses, for example.
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
* This field is only valid when the channel type is one of the HT types.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
@@ -339,7 +336,7 @@ struct ieee80211_bss_conf {
u16 ht_operation_mode;
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
- enum nl80211_channel_type channel_type;
+ struct cfg80211_chan_def chandef;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
u8 arp_addr_cnt;
bool arp_filter_enabled;
@@ -502,9 +499,14 @@ enum mac80211_tx_control_flags {
* This is set if the current BSS requires ERP protection.
* @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
* @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is split
+ * into a higher 4 bits (Nss) and lower 4 bits (MCS number)
* @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
* Greenfield mode.
* @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @IEEE80211_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ * (80+80 isn't supported yet)
* @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
* adjacent 20 MHz channels, if the current channel type is
* NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
@@ -515,12 +517,15 @@ enum mac80211_rate_control_flags {
IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
- /* rate index is an MCS rate number instead of an index */
+ /* rate index is an HT/VHT MCS instead of an index */
IEEE80211_TX_RC_MCS = BIT(3),
IEEE80211_TX_RC_GREEN_FIELD = BIT(4),
IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5),
IEEE80211_TX_RC_DUP_DATA = BIT(6),
IEEE80211_TX_RC_SHORT_GI = BIT(7),
+ IEEE80211_TX_RC_VHT_MCS = BIT(8),
+ IEEE80211_TX_RC_80_MHZ_WIDTH = BIT(9),
+ IEEE80211_TX_RC_160_MHZ_WIDTH = BIT(10),
};
@@ -563,10 +568,32 @@ enum mac80211_rate_control_flags {
*/
struct ieee80211_tx_rate {
s8 idx;
- u8 count;
- u8 flags;
+ u16 count:5,
+ flags:11;
} __packed;
+#define IEEE80211_MAX_TX_RETRY 31
+
+static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate,
+ u8 mcs, u8 nss)
+{
+ WARN_ON(mcs & ~0xF);
+ WARN_ON(nss & ~0x7);
+ rate->idx = (nss << 4) | mcs;
+}
+
+static inline u8
+ieee80211_rate_get_vht_mcs(const struct ieee80211_tx_rate *rate)
+{
+ return rate->idx & 0xF;
+}
+
+static inline u8
+ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
+{
+ return rate->idx >> 4;
+}
+
/**
* struct ieee80211_tx_info - skb transmit information
*
@@ -720,7 +747,11 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* (including FCS) was received.
* @RX_FLAG_SHORTPRE: Short preamble was used for this frame
* @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
* @RX_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_FLAG_80MHZ: 80 MHz was used
+ * @RX_FLAG_80P80MHZ: 80+80 MHz was used
+ * @RX_FLAG_160MHZ: 160 MHz was used
* @RX_FLAG_SHORT_GI: Short guard interval was used
* @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
* Valid only for data frames (mainly A-MPDU)
@@ -763,6 +794,10 @@ enum mac80211_rx_flags {
RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19),
RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20),
RX_FLAG_MACTIME_END = BIT(21),
+ RX_FLAG_VHT = BIT(22),
+ RX_FLAG_80MHZ = BIT(23),
+ RX_FLAG_80P80MHZ = BIT(24),
+ RX_FLAG_160MHZ = BIT(25),
};
/**
@@ -783,7 +818,8 @@ enum mac80211_rx_flags {
* @IEEE80211_HW_SIGNAL_*
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
- * HT rates are use (RX_FLAG_HT)
+ * HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
+ * @vht_nss: number of streams (VHT only)
* @flag: %RX_FLAG_*
* @rx_flags: internal RX flags for mac80211
* @ampdu_reference: A-MPDU reference number, must be a different value for
@@ -806,6 +842,7 @@ struct ieee80211_rx_status {
u16 vendor_radiotap_len;
u16 freq;
u8 rate_idx;
+ u8 vht_nss;
u8 rx_flags;
u8 band;
u8 antenna;
@@ -2550,7 +2587,6 @@ struct ieee80211_ops {
int (*remain_on_channel)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type,
int duration);
int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);