diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 339 |
1 files changed, 242 insertions, 97 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d49928ba5d0..1937c7d9830 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -13,10 +13,10 @@ #ifndef MAC80211_H #define MAC80211_H +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/if_ether.h> #include <linux/skbuff.h> -#include <linux/device.h> #include <linux/ieee80211.h> #include <net/cfg80211.h> #include <asm/unaligned.h> @@ -87,15 +87,19 @@ * */ +struct device; + /** * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. */ enum ieee80211_max_queues { - IEEE80211_MAX_QUEUES = 4, + IEEE80211_MAX_QUEUES = 16, }; +#define IEEE80211_INVAL_HW_QUEUE 0xff + /** * enum ieee80211_ac_numbers - AC numbers as used in mac80211 * @IEEE80211_AC_VO: voice @@ -229,7 +233,8 @@ enum ieee80211_rssi_event { * valid in station mode only while @assoc is true and if also * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf * @ps_dtim_period) - * @timestamp: beacon timestamp + * @last_tsf: last beacon's/probe response's TSF timestamp (could be old + * as it may have been received during scanning long ago) * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -241,7 +246,7 @@ enum ieee80211_rssi_event { * @channel_type: Channel type for this BSS -- the hardware might be * configured for HT40+ while this BSS only uses no-HT, for * example. - * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). + * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation. * This field is only valid when the channel type is one of the HT types. * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value * implies disabled @@ -276,7 +281,7 @@ struct ieee80211_bss_conf { u8 dtim_period; u16 beacon_int; u16 assoc_capability; - u64 timestamp; + u64 last_tsf; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -341,9 +346,9 @@ struct ieee80211_bss_conf { * used to indicate that a frame was already retried due to PS * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, * used to indicate frame should not be encrypted - * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll - * frame (PS-Poll or uAPSD) and should be sent although the station - * is in powersave mode. + * @IEEE80211_TX_CTL_NO_PS_BUFFER: This frame is a response to a poll + * frame (PS-Poll or uAPSD) or a non-bufferable MMPDU and must + * be sent although the station is in powersave mode. * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the * transmit function after the current frame, this can be used * by drivers to kick the DMA queue only if unset or when the @@ -399,7 +404,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), - IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17), + IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), /* hole at 20, use later */ @@ -425,7 +430,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \ IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \ IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \ - IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \ + IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_NO_PS_BUFFER | \ IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \ IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP) @@ -519,7 +524,7 @@ struct ieee80211_tx_rate { * * @flags: transmit info flags, defined above * @band: the band to transmit on (use for checking for races) - * @antenna_sel_tx: antenna to use, 0 for automatic diversity + * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC * @ack_frame_id: internal frame ID for TX status, used internally * @control: union for control data * @status: union for status data @@ -535,7 +540,7 @@ struct ieee80211_tx_info { u32 flags; u8 band; - u8 antenna_sel_tx; + u8 hw_queue; u16 ack_frame_id; @@ -561,7 +566,8 @@ struct ieee80211_tx_info { u8 ampdu_ack_len; int ack_signal; u8 ampdu_len; - /* 15 bytes free */ + u8 antenna; + /* 14 bytes free */ } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -659,6 +665,11 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used * @RX_FLAG_SHORT_GI: Short guard interval was used + * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present. + * Valid only for data frames (mainly A-MPDU) + * @RX_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, if + * the driver fills this value it should add %IEEE80211_RADIOTAP_MCS_HAVE_FMT + * to hw.radiotap_mcs_details to advertise that fact */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, @@ -672,6 +683,8 @@ enum mac80211_rx_flags { RX_FLAG_HT = 1<<9, RX_FLAG_40MHZ = 1<<10, RX_FLAG_SHORT_GI = 1<<11, + RX_FLAG_NO_SIGNAL_VAL = 1<<12, + RX_FLAG_HT_GF = 1<<13, }; /** @@ -852,6 +865,21 @@ struct ieee80211_channel_switch { }; /** + * enum ieee80211_vif_flags - virtual interface flags + * + * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering + * on this virtual interface to avoid unnecessary CPU wakeups + * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality + * monitoring on this virtual interface -- i.e. it can monitor + * connection quality related parameters, such as the RSSI level and + * provide notifications if configured trigger levels are reached. + */ +enum ieee80211_vif_flags { + IEEE80211_VIF_BEACON_FILTER = BIT(0), + IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1), +}; + +/** * struct ieee80211_vif - per-interface data * * Data in this structure is continually present for driver @@ -863,6 +891,12 @@ struct ieee80211_channel_switch { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively + * @driver_flags: flags/capabilities the driver has for this interface, + * these need to be set (or cleared) when the interface is added + * or, if supported by the driver, the interface type is changed + * at runtime, mac80211 will never touch this field + * @hw_queue: hardware queue for each AC + * @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -871,6 +905,12 @@ struct ieee80211_vif { struct ieee80211_bss_conf bss_conf; u8 addr[ETH_ALEN]; bool p2p; + + u8 cab_queue; + u8 hw_queue[IEEE80211_NUM_ACS]; + + u32 driver_flags; + /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -903,7 +943,7 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) * CCMP key if it requires CCMP encryption of management frames (MFP) to * be done in software. * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver - * for a CCMP key if space should be prepared for the IV, but the IV + * if space should be prepared for the IV, but the IV * itself should not be generated. Do not set together with * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. */ @@ -962,6 +1002,25 @@ enum set_key_cmd { }; /** + * enum ieee80211_sta_state - station state + * + * @IEEE80211_STA_NOTEXIST: station doesn't exist at all, + * this is a special state for add/remove transitions + * @IEEE80211_STA_NONE: station exists without special state + * @IEEE80211_STA_AUTH: station is authenticated + * @IEEE80211_STA_ASSOC: station is associated + * @IEEE80211_STA_AUTHORIZED: station is authorized (802.1X) + */ +enum ieee80211_sta_state { + /* NOTE: These need to be ordered correctly! */ + IEEE80211_STA_NOTEXIST, + IEEE80211_STA_NONE, + IEEE80211_STA_AUTH, + IEEE80211_STA_ASSOC, + IEEE80211_STA_AUTHORIZED, +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1079,10 +1138,6 @@ enum sta_notify_cmd { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_BEACON_FILTER: - * Hardware supports dropping of irrelevant beacon frames to - * avoid waking up cpu. - * * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: * Hardware supports static spatial multiplexing powersave, * ie. can turn off all but one chain even on HT connections @@ -1108,11 +1163,6 @@ enum sta_notify_cmd { * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. * - * @IEEE80211_HW_SUPPORTS_CQM_RSSI: - * Hardware can do connection quality monitoring - i.e. it can monitor - * connection quality related parameters, such as the RSSI level and - * provide notifications if configured trigger levels are reached. - * * @IEEE80211_HW_NEED_DTIM_PERIOD: * This device needs to know the DTIM period for the BSS before * associating. @@ -1134,6 +1184,19 @@ enum sta_notify_cmd { * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session * setup strictly in HW. mac80211 should not attempt to do this in * software. + * + * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while + * being idle (i.e. mac80211 doesn't have to go idle-off during the + * the scan). + * + * @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of + * a virtual monitor interface when monitor interfaces are the only + * active interfaces. + * + * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface + * queue mapping in order to use different queues (not just one per AC) + * for different virtual interfaces. See the doc section on HW queue + * control for more details. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1150,16 +1213,17 @@ enum ieee80211_hw_flags { IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, - IEEE80211_HW_BEACON_FILTER = 1<<14, + IEEE80211_HW_WANT_MONITOR_VIF = 1<<14, IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, - IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, + IEEE80211_HW_QUEUE_CONTROL = 1<<20, IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, + IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, }; /** @@ -1225,6 +1289,14 @@ enum ieee80211_hw_flags { * @max_tx_aggregation_subframes: maximum number of subframes in an * aggregate an HT driver will transmit, used by the peer as a * hint to size its reorder buffer. + * + * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX + * (if %IEEE80211_HW_QUEUE_CONTROL is set) + * + * @radiotap_mcs_details: lists which MCS information can the HW + * reports, by default it is set to _MCS, _GI and _BW but doesn't + * include _FMT. Use %IEEE80211_RADIOTAP_MCS_HAVE_* values, only + * adding _BW is supported today. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -1245,6 +1317,8 @@ struct ieee80211_hw { u8 max_rate_tries; u8 max_rx_aggregation_subframes; u8 max_tx_aggregation_subframes; + u8 offchannel_tx_hw_queue; + u8 radiotap_mcs_details; }; /** @@ -1286,7 +1360,7 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->control.rates[0].idx < 0)) + if (WARN_ON_ONCE(c->control.rates[0].idx < 0)) return NULL; return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } @@ -1446,8 +1520,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER - * hardware capability. The driver needs to enable beacon filter support + * Beacon filter support is advertised with the %IEEE80211_VIF_BEACON_FILTER + * interface capability. The driver needs to enable beacon filter support * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When * power save is enabled, the stack will not check for beacon loss and the * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). @@ -1599,7 +1673,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * the station sends a PS-Poll or a uAPSD trigger frame, mac80211 * will inform the driver of this with the @allow_buffered_frames * callback; this callback is optional. mac80211 will then transmit - * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE + * the frames as usual and set the %IEEE80211_TX_CTL_NO_PS_BUFFER * on each frame. The last frame in the service period (or the only * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to * indicate that it ends the service period; as this frame must have @@ -1607,6 +1681,9 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * When TX status is reported for this frame, the service period is * marked has having ended and a new one can be started by the peer. * + * Additionally, non-bufferable MMPDUs can also be transmitted by + * mac80211 with the %IEEE80211_TX_CTL_NO_PS_BUFFER set in them. + * * Another race condition can happen on some devices like iwlwifi * when there are frames queued for the station and it wakes up * or polls; the frames that are already queued could end up being @@ -1650,6 +1727,61 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); */ /** + * DOC: HW queue control + * + * Before HW queue control was introduced, mac80211 only had a single static + * assignment of per-interface AC software queues to hardware queues. This + * was problematic for a few reasons: + * 1) off-channel transmissions might get stuck behind other frames + * 2) multiple virtual interfaces couldn't be handled correctly + * 3) after-DTIM frames could get stuck behind other frames + * + * To solve this, hardware typically uses multiple different queues for all + * the different usages, and this needs to be propagated into mac80211 so it + * won't have the same problem with the software queues. + * + * Therefore, mac80211 now offers the %IEEE80211_HW_QUEUE_CONTROL capability + * flag that tells it that the driver implements its own queue control. To do + * so, the driver will set up the various queues in each &struct ieee80211_vif + * and the offchannel queue in &struct ieee80211_hw. In response, mac80211 will + * use those queue IDs in the hw_queue field of &struct ieee80211_tx_info and + * if necessary will queue the frame on the right software queue that mirrors + * the hardware queue. + * Additionally, the driver has to then use these HW queue IDs for the queue + * management functions (ieee80211_stop_queue() et al.) + * + * The driver is free to set up the queue mappings as needed, multiple virtual + * interfaces may map to the same hardware queues if needed. The setup has to + * happen during add_interface or change_interface callbacks. For example, a + * driver supporting station+station and station+AP modes might decide to have + * 10 hardware queues to handle different scenarios: + * + * 4 AC HW queues for 1st vif: 0, 1, 2, 3 + * 4 AC HW queues for 2nd vif: 4, 5, 6, 7 + * after-DTIM queue for AP: 8 + * off-channel queue: 9 + * + * It would then set up the hardware like this: + * hw.offchannel_tx_hw_queue = 9 + * + * and the first virtual interface that is added as follows: + * vif.hw_queue[IEEE80211_AC_VO] = 0 + * vif.hw_queue[IEEE80211_AC_VI] = 1 + * vif.hw_queue[IEEE80211_AC_BE] = 2 + * vif.hw_queue[IEEE80211_AC_BK] = 3 + * vif.cab_queue = 8 // if AP mode, otherwise %IEEE80211_INVAL_HW_QUEUE + * and the second virtual interface with 4-7. + * + * If queue 6 gets full, for example, mac80211 would only stop the second + * virtual interface's BE queue since virtual interface queues are per AC. + * + * Note that the vif.cab_queue value should be set to %IEEE80211_INVAL_HW_QUEUE + * whenever the queue is not used (i.e. the interface is not in AP mode) if the + * queue could potentially be shared since mac80211 will look at cab_queue when + * a queue is stopped/woken even if the interface is not in AP mode. + */ + +/** * enum ieee80211_filter_flags - hardware filter flags * * These flags determine what the filter in hardware should be @@ -1725,20 +1857,6 @@ enum ieee80211_ampdu_mlme_action { }; /** - * enum ieee80211_tx_sync_type - TX sync type - * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication - * (and possibly also before direct probe) - * @IEEE80211_TX_SYNC_ASSOC: sync TX for association - * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame - * (not implemented yet) - */ -enum ieee80211_tx_sync_type { - IEEE80211_TX_SYNC_AUTH, - IEEE80211_TX_SYNC_ASSOC, - IEEE80211_TX_SYNC_ACTION, -}; - -/** * enum ieee80211_frame_release_type - frame release reason * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to @@ -1750,6 +1868,18 @@ enum ieee80211_frame_release_type { }; /** + * enum ieee80211_rate_control_changed - flags to indicate what changed + * + * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit + * to this station changed. + * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. + */ +enum ieee80211_rate_control_changed { + IEEE80211_RC_BW_CHANGED = BIT(0), + IEEE80211_RC_SMPS_CHANGED = BIT(1), +}; + +/** * struct ieee80211_ops - callbacks from mac80211 to the driver * * This structure contains various callbacks that the driver may @@ -1848,26 +1978,6 @@ enum ieee80211_frame_release_type { * of the bss parameters has changed when a call is made. The callback * can sleep. * - * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the - * driver should sync with the GO's powersaving so the device doesn't - * transmit the frame while the GO is asleep. In the regular AP case - * it may be used by drivers for devices implementing other restrictions - * on talking to APs, e.g. due to regulatory enforcement or just HW - * restrictions. - * This function is called for every authentication, association and - * action frame separately since applications might attempt to auth - * with multiple APs before chosing one to associate to. If it returns - * an error, the corresponding authentication, association or frame - * transmission is aborted and reported as having failed. It is always - * called after tuning to the correct channel. - * The callback might be called multiple times before @finish_tx_sync - * (but @finish_tx_sync will be called once for each) but in practice - * this is unlikely to happen. It can also refuse in that case if the - * driver cannot handle that situation. - * This callback can sleep. - * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned - * an error. This callback can sleep. - * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed * to configure_filter(). This callback must be atomic. @@ -1963,6 +2073,21 @@ enum ieee80211_frame_release_type { * in AP mode, this callback will not be called when the flag * %IEEE80211_HW_AP_LINK_PS is set. Must be atomic. * + * @sta_state: Notifies low level driver about state transition of a + * station (which can be the AP, a client, IBSS/WDS/mesh peer etc.) + * This callback is mutually exclusive with @sta_add/@sta_remove. + * It must not fail for down transitions but may fail for transitions + * up the list of states. + * The callback can sleep. + * + * @sta_rc_update: Notifies the driver of changes to the bitrates that can be + * used to transmit to the station. The changes are advertised with bits + * from &enum ieee80211_rate_control_changed and the values are reflected + * in the station data. This callback should only be used when the driver + * uses hardware rate control (%IEEE80211_HW_HAS_RATE_CONTROL) since + * otherwise the rate control algorithm is notified directly. + * Must be atomic. + * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. * Returns a negative error code on failure. @@ -2098,7 +2223,7 @@ enum ieee80211_frame_release_type { * @allow_buffered_frames: Prepare device to allow the given number of frames * to go out to the given station. The frames will be sent by mac80211 * via the usual TX path after this call. The TX information for frames - * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set + * released will also have the %IEEE80211_TX_CTL_NO_PS_BUFFER flag set * and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case * frames from multiple TIDs are released and the driver might reorder * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag @@ -2108,6 +2233,14 @@ enum ieee80211_frame_release_type { * The @tids parameter is a bitmap and tells the driver which TIDs the * frames will be on; it will at most have two bits set. * This callback must be atomic. + * + * @get_et_sset_count: Ethtool API to get string-set count. + * + * @get_et_stats: Ethtool API to get a set of u64 stats. + * + * @get_et_strings: Ethtool API to get a set of strings to describe stats + * and perhaps other supported types of ethtool data-sets. + * */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -2118,6 +2251,7 @@ struct ieee80211_ops { #ifdef CONFIG_PM int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan); int (*resume)(struct ieee80211_hw *hw); + void (*set_wakeup)(struct ieee80211_hw *hw, bool enabled); #endif int (*add_interface)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -2132,13 +2266,6 @@ struct ieee80211_ops { struct ieee80211_bss_conf *info, u32 changed); - int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - const u8 *bssid, enum ieee80211_tx_sync_type type); - void (*finish_tx_sync)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *bssid, - enum ieee80211_tx_sync_type type); - u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, @@ -2182,8 +2309,16 @@ struct ieee80211_ops { struct ieee80211_sta *sta); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); + int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + enum ieee80211_sta_state old_state, + enum ieee80211_sta_state new_state); + void (*sta_rc_update)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + u32 changed); int (*conf_tx)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue, + struct ieee80211_vif *vif, u16 ac, const struct ieee80211_tx_queue_params *params); u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2236,6 +2371,15 @@ struct ieee80211_ops { u16 tids, int num_frames, enum ieee80211_frame_release_type reason, bool more_data); + + int (*get_et_sset_count)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, int sset); + void (*get_et_stats)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ethtool_stats *stats, u64 *data); + void (*get_et_strings)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u32 sset, u8 *data); }; /** @@ -2830,6 +2974,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, */ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum ieee80211_band band, size_t frame_len, struct ieee80211_rate *rate); @@ -3316,7 +3461,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER and * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the * hardware is not receiving beacons with this function. */ @@ -3327,7 +3472,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. * @@ -3397,7 +3542,7 @@ void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); * @rssi_event: the RSSI trigger event type * @gfp: context flags * - * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality + * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality * monitoring is configured with an rssi threshold, the driver will inform * whenever the rssi level reaches the threshold. */ @@ -3498,24 +3643,13 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); /* Rate control API */ /** - * enum rate_control_changed - flags to indicate which parameter changed - * - * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have - * changed, rate control algorithm can update its internal state if needed. - * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed, the rate - * control algorithm needs to adjust accordingly. - */ -enum rate_control_changed { - IEEE80211_RC_HT_CHANGED = BIT(0), - IEEE80211_RC_SMPS_CHANGED = BIT(1), -}; - -/** * struct ieee80211_tx_rate_control - rate control information for/from RC algo * * @hw: The hardware the algorithm is invoked for. * @sband: The band this frame is being transmitted on. * @bss_conf: the current BSS configuration + * @skb: the skb that will be transmitted, the control information in it needs + * to be filled in * @reported_rate: The rate control algorithm can fill this in to indicate * which rate should be reported to userspace as the current rate and * used for rate calculations in the mesh network. @@ -3523,12 +3657,11 @@ enum rate_control_changed { * RTS threshold * @short_preamble: whether mac80211 will request short-preamble transmission * if the selected rate supports it - * @max_rate_idx: user-requested maximum rate (not MCS for now) + * @max_rate_idx: user-requested maximum (legacy) rate * (deprecated; this will be removed once drivers get updated to use * rate_idx_mask) - * @rate_idx_mask: user-requested rate mask (not MCS for now) - * @skb: the skb that will be transmitted, the control information in it needs - * to be filled in + * @rate_idx_mask: user-requested (legacy) rate mask + * @rate_idx_mcs_mask: user-requested MCS rate mask * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { @@ -3540,6 +3673,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; + u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; bool bss; }; @@ -3553,9 +3687,8 @@ struct rate_control_ops { void (*rate_init)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta); void (*rate_update)(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, - void *priv_sta, u32 changed, - enum nl80211_channel_type oper_chan_type); + struct ieee80211_sta *sta, void *priv_sta, + u32 changed); void (*free_sta)(void *priv, struct ieee80211_sta *sta, void *priv_sta); @@ -3690,8 +3823,20 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); -int ieee80211_add_srates_ie(struct ieee80211_vif *vif, struct sk_buff *skb); +int ieee80211_add_srates_ie(struct ieee80211_vif *vif, + struct sk_buff *skb, bool need_basic); int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif, - struct sk_buff *skb); + struct sk_buff *skb, bool need_basic); + +/** + * ieee80211_ave_rssi - report the average rssi for the specified interface + * + * @vif: the specified virtual interface + * + * This function return the average rssi value for the requested interface. + * It assumes that the given vif is valid. + */ +int ieee80211_ave_rssi(struct ieee80211_vif *vif); + #endif /* MAC80211_H */ |