diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 138 |
1 files changed, 127 insertions, 11 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7ceed99a05b..f4ab2fb4d50 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -154,12 +154,14 @@ struct ieee80211_low_level_stats { * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel, * this is used only with channel switching with CSA + * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3), + IEEE80211_CHANCTX_CHANGE_MIN_WIDTH = BIT(4), }; /** @@ -169,6 +171,7 @@ enum ieee80211_chanctx_change { * that contains it is visible in mac80211 only. * * @def: the channel definition + * @min_def: the minimum channel definition currently required. * @rx_chains_static: The number of RX chains that must always be * active on the channel to receive MIMO transmissions * @rx_chains_dynamic: The number of RX chains that must be enabled @@ -180,6 +183,7 @@ enum ieee80211_chanctx_change { */ struct ieee80211_chanctx_conf { struct cfg80211_chan_def def; + struct cfg80211_chan_def min_def; u8 rx_chains_static, rx_chains_dynamic; @@ -1159,6 +1163,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) } /** + * wdev_to_ieee80211_vif - return a vif struct from a wdev + * @wdev: the wdev to get the vif for + * + * This can be used by mac80211 drivers with direct cfg80211 APIs + * (like the vendor commands) that get a wdev. + * + * Note that this function may return %NULL if the given wdev isn't + * associated with a vif that the driver knows about (e.g. monitor + * or AP_VLAN interfaces.) + */ +struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev); + +/** * enum ieee80211_key_flags - key flags * * These flags are used for communication about keys between the driver @@ -1229,6 +1246,36 @@ struct ieee80211_key_conf { }; /** + * struct ieee80211_cipher_scheme - cipher scheme + * + * This structure contains a cipher scheme information defining + * the secure packet crypto handling. + * + * @cipher: a cipher suite selector + * @iftype: a cipher iftype bit mask indicating an allowed cipher usage + * @hdr_len: a length of a security header used the cipher + * @pn_len: a length of a packet number in the security header + * @pn_off: an offset of pn from the beginning of the security header + * @key_idx_off: an offset of key index byte in the security header + * @key_idx_mask: a bit mask of key_idx bits + * @key_idx_shift: a bit shift needed to get key_idx + * key_idx value calculation: + * (sec_header_base[key_idx_off] & key_idx_mask) >> key_idx_shift + * @mic_len: a mic length in bytes + */ +struct ieee80211_cipher_scheme { + u32 cipher; + u16 iftype; + u8 hdr_len; + u8 pn_len; + u8 pn_off; + u8 key_idx_off; + u8 key_idx_mask; + u8 key_idx_shift; + u8 mic_len; +}; + +/** * enum set_key_cmd - key command * * Used with the set_key() callback in &struct ieee80211_ops, this @@ -1566,7 +1613,8 @@ enum ieee80211_hw_flags { * @extra_tx_headroom: headroom to reserve in each transmit skb * for use by the driver (e.g. for transmit headers.) * - * @channel_change_time: time (in microseconds) it takes to change channels. + * @extra_beacon_tailroom: tailroom to reserve in each beacon tx skb. + * Can be used by drivers to add extra IEs. * * @max_signal: Maximum value for signal (rssi) in RX information, used * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB @@ -1636,6 +1684,10 @@ enum ieee80211_hw_flags { * @uapsd_max_sp_len: maximum number of total buffered frames the WMM AP may * deliver to a WMM STA during any Service Period triggered by the WMM STA. * Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values. + * + * @n_cipher_schemes: a size of an array of cipher schemes definitions. + * @cipher_schemes: a pointer to an array of cipher scheme definitions + * supported by HW. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -1644,7 +1696,7 @@ struct ieee80211_hw { void *priv; u32 flags; unsigned int extra_tx_headroom; - int channel_change_time; + unsigned int extra_beacon_tailroom; int vif_data_size; int sta_data_size; int chanctx_data_size; @@ -1663,6 +1715,8 @@ struct ieee80211_hw { netdev_features_t netdev_features; u8 uapsd_queues; u8 uapsd_max_sp_len; + u8 n_cipher_schemes; + const struct ieee80211_cipher_scheme *cipher_schemes; }; /** @@ -2065,6 +2119,11 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP) * and also take care of the EOSP and MORE_DATA bits in the frame. * The driver may also use ieee80211_sta_eosp() in this case. + * + * Note that if the driver ever buffers frames other than QoS-data + * frames, it must take care to never send a non-QoS-data frame as + * the last frame in a service period, adding a QoS-nulldata frame + * after a non-QoS-data frame if needed. */ /** @@ -2358,9 +2417,6 @@ enum ieee80211_roc_type { * See the section "Frame filtering" for more information. * This callback must be implemented and can sleep. * - * @set_multicast_list: Configure the device's interface specific RX multicast - * filter. This callback is optional. This callback must be atomic. - * * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit * must be set or cleared for a given STA. Must be atomic. * @@ -2445,7 +2501,11 @@ enum ieee80211_roc_type { * AP, IBSS/WDS/mesh peer etc. This callback can sleep. * * @sta_remove: Notifies low level driver about removal of an associated - * station, AP, IBSS/WDS/mesh peer etc. This callback can sleep. + * station, AP, IBSS/WDS/mesh peer etc. Note that after the callback + * returns it isn't safe to use the pointer, not even RCU protected; + * no RCU grace period is guaranteed between returning here and freeing + * the station. See @sta_pre_rcu_remove if needed. + * This callback can sleep. * * @sta_add_debugfs: Drivers can use this callback to add debugfs files * when a station is added to mac80211's station list. This callback @@ -2464,7 +2524,17 @@ enum ieee80211_roc_type { * station (which can be the AP, a client, IBSS/WDS/mesh peer etc.) * This callback is mutually exclusive with @sta_add/@sta_remove. * It must not fail for down transitions but may fail for transitions - * up the list of states. + * up the list of states. Also note that after the callback returns it + * isn't safe to use the pointer, not even RCU protected - no RCU grace + * period is guaranteed between returning here and freeing the station. + * See @sta_pre_rcu_remove if needed. + * The callback can sleep. + * + * @sta_pre_rcu_remove: Notify driver about station removal before RCU + * synchronisation. This is useful if a driver needs to have station + * pointers protected using RCU, it can then use this call to clear + * the pointers instead of waiting for an RCU grace period to elapse + * in @sta_state. * The callback can sleep. * * @sta_rc_update: Notifies the driver of changes to the bitrates that can be @@ -2724,10 +2794,6 @@ struct ieee80211_ops { unsigned int changed_flags, unsigned int *total_flags, u64 multicast); - void (*set_multicast_list)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, bool allmulti, - struct netdev_hw_addr_list *mc_list); - int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set); int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, @@ -2781,6 +2847,9 @@ struct ieee80211_ops { struct ieee80211_sta *sta, enum ieee80211_sta_state old_state, enum ieee80211_sta_state new_state); + void (*sta_pre_rcu_remove)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); void (*sta_rc_update)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, @@ -4585,4 +4654,51 @@ bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct sk_buff *skb, int band, struct ieee80211_sta **sta); +/** + * struct ieee80211_noa_data - holds temporary data for tracking P2P NoA state + * + * @next_tsf: TSF timestamp of the next absent state change + * @has_next_tsf: next absent state change event pending + * + * @absent: descriptor bitmask, set if GO is currently absent + * + * private: + * + * @count: count fields from the NoA descriptors + * @desc: adjusted data from the NoA + */ +struct ieee80211_noa_data { + u32 next_tsf; + bool has_next_tsf; + + u8 absent; + + u8 count[IEEE80211_P2P_NOA_DESC_MAX]; + struct { + u32 start; + u32 duration; + u32 interval; + } desc[IEEE80211_P2P_NOA_DESC_MAX]; +}; + +/** + * ieee80211_parse_p2p_noa - initialize NoA tracking data from P2P IE + * + * @attr: P2P NoA IE + * @data: NoA tracking data + * @tsf: current TSF timestamp + * + * Return: number of successfully parsed descriptors + */ +int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr, + struct ieee80211_noa_data *data, u32 tsf); + +/** + * ieee80211_update_p2p_noa - get next pending P2P GO absent state change + * + * @data: NoA tracking data + * @tsf: current TSF timestamp + */ +void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); + #endif /* MAC80211_H */ |