diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 40 |
1 files changed, 15 insertions, 25 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e3fa90ce9ec..bb86aa6f98d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -233,8 +233,10 @@ enum ieee80211_rssi_event { * valid in station mode only while @assoc is true and if also * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf * @ps_dtim_period) - * @last_tsf: last beacon's/probe response's TSF timestamp (could be old + * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old * as it may have been received during scanning long ago) + * @sync_device_ts: the device timestamp corresponding to the sync_tsf, + * the driver/device can use this to calculate synchronisation * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -281,7 +283,8 @@ struct ieee80211_bss_conf { u8 dtim_period; u16 beacon_int; u16 assoc_capability; - u64 last_tsf; + u64 sync_tsf; + u32 sync_device_ts; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -696,6 +699,8 @@ enum mac80211_rx_flags { * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. + * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use + * it but can store it and pass it back to the driver for synchronisation * @band: the active band when this frame was received * @freq: frequency the radio was tuned to when receiving this frame, in MHz * @signal: signal strength when receiving this frame, either in dBm, in dB or @@ -709,13 +714,14 @@ enum mac80211_rx_flags { */ struct ieee80211_rx_status { u64 mactime; - enum ieee80211_band band; - int freq; - int signal; - int antenna; - int rate_idx; - int flag; - unsigned int rx_flags; + u32 device_timestamp; + u16 flag; + u16 freq; + u8 rate_idx; + u8 rx_flags; + u8 band; + u8 antenna; + s8 signal; }; /** @@ -3592,22 +3598,6 @@ void ieee80211_request_smps(struct ieee80211_vif *vif, enum ieee80211_smps_mode smps_mode); /** - * ieee80211_key_removed - disable hw acceleration for key - * @key_conf: The key hw acceleration should be disabled for - * - * This allows drivers to indicate that the given key has been - * removed from hardware acceleration, due to a new key that - * was added. Don't use this if the key can continue to be used - * for TX, if the key restriction is on RX only it is permitted - * to keep the key for TX only and not call this function. - * - * Due to locking constraints, it may only be called during - * @set_key. This function must be allowed to sleep, and the - * key it tries to disable may still be used until it returns. - */ -void ieee80211_key_removed(struct ieee80211_key_conf *key_conf); - -/** * ieee80211_ready_on_channel - notification of remain-on-channel start * @hw: pointer as obtained from ieee80211_alloc_hw() */ |