diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 100 |
1 files changed, 73 insertions, 27 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 29c7be8808d..d52914b7533 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -376,6 +376,12 @@ enum ieee80211_rssi_event { * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm + * @txpower_type: TX power adjustment used to control per packet Transmit + * Power Control (TPC) in lower driver for the current vif. In particular + * TPC is enabled if value passed in %txpower_type is + * NL80211_TX_POWER_LIMITED (allow using less than specified from + * userspace), whereas TPC is disabled if %txpower_type is set to + * NL80211_TX_POWER_FIXED (use value configured from userspace) * @p2p_noa_attr: P2P NoA attribute for P2P powersave */ struct ieee80211_bss_conf { @@ -411,6 +417,7 @@ struct ieee80211_bss_conf { size_t ssid_len; bool hidden_ssid; int txpower; + enum nl80211_tx_power_setting txpower_type; struct ieee80211_p2p_noa_attr p2p_noa_attr; }; @@ -505,8 +512,11 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it * would be fragmented by size (this is optional, only used for * monitor injection). - * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll - * frame (PS-Poll or uAPSD). + * @IEEE80211_TX_STAT_NOACK_TRANSMITTED: A frame that was marked with + * IEEE80211_TX_CTL_NO_ACK has been successfully transmitted without + * any errors (like issues specific to the driver/HW). + * This flag must not be set for frames that don't request no-ack + * behaviour with IEEE80211_TX_CTL_NO_ACK. * * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. @@ -542,7 +552,7 @@ enum mac80211_tx_info_flags { IEEE80211_TX_STATUS_EOSP = BIT(28), IEEE80211_TX_CTL_USE_MINRATE = BIT(29), IEEE80211_TX_CTL_DONTFRAG = BIT(30), - IEEE80211_TX_CTL_PS_RESPONSE = BIT(31), + IEEE80211_TX_STAT_NOACK_TRANSMITTED = BIT(31), }; #define IEEE80211_TX_CTL_STBC_SHIFT 23 @@ -552,11 +562,14 @@ enum mac80211_tx_info_flags { * * @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control * protocol frame (e.g. EAP) + * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll + * frame (PS-Poll or uAPSD). * * These flags are used in tx_info->control.flags. */ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), + IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), }; /* @@ -925,15 +938,13 @@ enum mac80211_rx_flags { * These flags are used with the @vht_flag member of * &struct ieee80211_rx_status. * @RX_VHT_FLAG_80MHZ: 80 MHz was used - * @RX_VHT_FLAG_80P80MHZ: 80+80 MHz was used * @RX_VHT_FLAG_160MHZ: 160 MHz was used * @RX_VHT_FLAG_BF: packet was beamformed */ enum mac80211_rx_vht_flags { RX_VHT_FLAG_80MHZ = BIT(0), - RX_VHT_FLAG_80P80MHZ = BIT(1), - RX_VHT_FLAG_160MHZ = BIT(2), - RX_VHT_FLAG_BF = BIT(3), + RX_VHT_FLAG_160MHZ = BIT(1), + RX_VHT_FLAG_BF = BIT(2), }; /** @@ -1181,10 +1192,15 @@ struct ieee80211_channel_switch { * monitoring on this virtual interface -- i.e. it can monitor * connection quality related parameters, such as the RSSI level and * provide notifications if configured trigger levels are reached. + * @IEEE80211_VIF_SUPPORTS_UAPSD: The device can do U-APSD for this + * interface. This flag should be set during interface addition, + * but may be set/cleared as late as authentication to an AP. It is + * only valid for managed/station mode interfaces. */ enum ieee80211_vif_flags { IEEE80211_VIF_BEACON_FILTER = BIT(0), IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1), + IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2), }; /** @@ -1270,19 +1286,22 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev); * * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the * driver to indicate that it requires IV generation for this - * particular key. + * particular key. Setting this flag does not necessarily mean that SKBs + * will have sufficient tailroom for ICV or MIC. * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by * the driver for a TKIP key if it requires Michael MIC * generation in software. * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates * that the key is pairwise rather then a shared key. * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a - * CCMP key if it requires CCMP encryption of management frames (MFP) to - * be done in software. + * CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames + * (MFP) to be done in software. * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver * if space should be prepared for the IV, but the IV * itself should not be generated. Do not set together with - * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. + * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does + * not necessarily mean that SKBs will have sufficient tailroom for ICV or + * MIC. * @IEEE80211_KEY_FLAG_RX_MGMT: This key will be used to decrypt received * management frames. The flag can help drivers that have a hardware * crypto implementation that doesn't deal with management frames @@ -1291,8 +1310,11 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev); * RX, if your crypto engine can't deal with TX you can also set the * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW. * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the - * driver for a CCMP key to indicate that is requires IV generation + * driver for a CCMP/GCMP key to indicate that is requires IV generation * only for managment frames (MFP). + * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the + * driver for a key to indicate that sufficient tailroom must always + * be reserved for ICV or MIC, even when HW encryption is enabled. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), @@ -1302,6 +1324,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_SW_MGMT_TX = BIT(4), IEEE80211_KEY_FLAG_PUT_IV_SPACE = BIT(5), IEEE80211_KEY_FLAG_RX_MGMT = BIT(6), + IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7), }; /** @@ -1580,11 +1603,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_SUPPORTS_UAPSD: - * Hardware supports Unscheduled Automatic Power Save Delivery - * (U-APSD) in managed mode. The mode is configured with - * conf_tx() operation. - * * @IEEE80211_HW_REPORTS_TX_ACK_STATUS: * Hardware can provide ack status reports of Tx frames to * the stack. @@ -1623,6 +1641,12 @@ struct ieee80211_tx_control { * be created. It is expected user-space will create vifs as * desired (and thus have them named as desired). * + * @IEEE80211_HW_SW_CRYPTO_CONTROL: The driver wants to control which of the + * crypto algorithms can be done in software - so don't automatically + * try to fall back to it if hardware crypto fails, but do so only if + * the driver returns 1. This also forces the driver to advertise its + * supported cipher suites. + * * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface * queue mapping in order to use different queues (not just one per AC) * for different virtual interfaces. See the doc section on HW queue @@ -1670,8 +1694,8 @@ enum ieee80211_hw_flags { IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_WANT_MONITOR_VIF = 1<<14, IEEE80211_HW_NO_AUTO_VIF = 1<<15, - /* free slot */ - IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, + IEEE80211_HW_SW_CRYPTO_CONTROL = 1<<16, + /* free slots */ IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, IEEE80211_HW_QUEUE_CONTROL = 1<<20, @@ -1945,6 +1969,11 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * added; if you return 0 then hw_key_idx must be assigned to the * hardware key index, you are free to use the full u8 range. * + * Note that in the case that the @IEEE80211_HW_SW_CRYPTO_CONTROL flag is + * set, mac80211 will not automatically fall back to software crypto if + * enabling hardware crypto failed. The set_key() call may also return the + * value 1 to permit this specific key/algorithm to be done in software. + * * When the cmd is %DISABLE_KEY then it must succeed. * * Note that it is permissible to not decrypt a frame even if a key @@ -2023,7 +2052,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * enabled whenever user has enabled powersave. * * Driver informs U-APSD client support by enabling - * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the + * %IEEE80211_VIF_SUPPORTS_UAPSD flag. The mode is configured through the * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS * Nullfunc frames and stay awake until the service period has ended. To * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames @@ -2696,6 +2725,14 @@ enum ieee80211_reconfig_type { * is only used if the configured rate control algorithm actually uses * the new rate table API, and is therefore optional. Must be atomic. * + * @sta_statistics: Get statistics for this station. For example with beacon + * filtering, the statistics kept by mac80211 might not be accurate, so + * let the driver pre-fill the statistics. The driver can fill most of + * the values (indicating which by setting the filled bitmap), but not + * all of them make sense - see the source for which ones are possible. + * Statistics that the driver doesn't fill will be filled by mac80211. + * The callback can sleep. + * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. * Returns a negative error code on failure. @@ -2856,9 +2893,6 @@ enum ieee80211_reconfig_type { * @get_et_strings: Ethtool API to get a set of strings to describe stats * and perhaps other supported types of ethtool data-sets. * - * @get_rssi: Get current signal strength in dBm, the function is optional - * and can sleep. - * * @mgd_prepare_tx: Prepare for transmitting a management frame for association * before associated. In multi-channel scenarios, a virtual interface is * bound to a channel before it is associated, but as it isn't associated @@ -3059,6 +3093,10 @@ struct ieee80211_ops { void (*sta_rate_tbl_update)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta); + void (*sta_statistics)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct station_info *sinfo); int (*conf_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 ac, const struct ieee80211_tx_queue_params *params); @@ -3126,8 +3164,6 @@ struct ieee80211_ops { void (*get_et_strings)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 sset, u8 *data); - int (*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, s8 *rssi_dbm); void (*mgd_prepare_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -4062,6 +4098,10 @@ void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf, * reverse order than in packet) * @aes_cmac: PN data, most significant byte first (big endian, * reverse order than in packet) + * @aes_gmac: PN data, most significant byte first (big endian, + * reverse order than in packet) + * @gcmp: PN data, most significant byte first (big endian, + * reverse order than in packet) */ struct ieee80211_key_seq { union { @@ -4075,6 +4115,12 @@ struct ieee80211_key_seq { struct { u8 pn[6]; } aes_cmac; + struct { + u8 pn[6]; + } aes_gmac; + struct { + u8 pn[6]; + } gcmp; }; }; @@ -4099,7 +4145,7 @@ void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf, * ieee80211_get_key_rx_seq - get key RX sequence counter * * @keyconf: the parameter passed with the set key - * @tid: The TID, or -1 for the management frame value (CCMP only); + * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only); * the value on TID 0 is also used for non-QoS frames. For * CMAC, only TID 0 is valid. * @seq: buffer to receive the sequence data @@ -4135,7 +4181,7 @@ void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf, * ieee80211_set_key_rx_seq - set key RX sequence counter * * @keyconf: the parameter passed with the set key - * @tid: The TID, or -1 for the management frame value (CCMP only); + * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only); * the value on TID 0 is also used for non-QoS frames. For * CMAC, only TID 0 is valid. * @seq: new sequence data |