diff options
Diffstat (limited to 'include/net')
41 files changed, 1870 insertions, 928 deletions
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 3ad5390a4dd..968166a45f8 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -81,12 +81,6 @@ enum { BT_CLOSED }; -/* Endianness conversions */ -#define htobs(a) __cpu_to_le16(a) -#define htobl(a) __cpu_to_le32(a) -#define btohs(a) __le16_to_cpu(a) -#define btohl(a) __le32_to_cpu(a) - /* BD Address */ typedef struct { __u8 b[6]; @@ -171,15 +165,6 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l return skb; } -static inline int skb_frags_no(struct sk_buff *skb) -{ - register struct sk_buff *frag = skb_shinfo(skb)->frag_list; - register int n = 1; - - for (; frag; frag=frag->next, n++); - return n; -} - int bt_err(__u16 code); extern int hci_sock_init(void); diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 73aead222b3..c4ca4228b08 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -137,6 +137,8 @@ struct hci_dev { struct device *parent; struct device dev; + struct rfkill *rfkill; + struct module *owner; int (*open)(struct hci_dev *hdev); diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index f566aa1f0a4..e919fca1072 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -26,8 +26,13 @@ #define __L2CAP_H /* L2CAP defaults */ -#define L2CAP_DEFAULT_MTU 672 -#define L2CAP_DEFAULT_FLUSH_TO 0xFFFF +#define L2CAP_DEFAULT_MTU 672 +#define L2CAP_DEFAULT_FLUSH_TO 0xffff +#define L2CAP_DEFAULT_RX_WINDOW 1 +#define L2CAP_DEFAULT_MAX_RECEIVE 1 +#define L2CAP_DEFAULT_RETRANS_TO 300 /* 300 milliseconds */ +#define L2CAP_DEFAULT_MONITOR_TO 1000 /* 1 second */ +#define L2CAP_DEFAULT_MAX_RX_APDU 0xfff7 #define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ #define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ @@ -64,17 +69,29 @@ struct l2cap_conninfo { #define L2CAP_LM_SECURE 0x0020 /* L2CAP command codes */ -#define L2CAP_COMMAND_REJ 0x01 -#define L2CAP_CONN_REQ 0x02 -#define L2CAP_CONN_RSP 0x03 -#define L2CAP_CONF_REQ 0x04 -#define L2CAP_CONF_RSP 0x05 -#define L2CAP_DISCONN_REQ 0x06 -#define L2CAP_DISCONN_RSP 0x07 -#define L2CAP_ECHO_REQ 0x08 -#define L2CAP_ECHO_RSP 0x09 -#define L2CAP_INFO_REQ 0x0a -#define L2CAP_INFO_RSP 0x0b +#define L2CAP_COMMAND_REJ 0x01 +#define L2CAP_CONN_REQ 0x02 +#define L2CAP_CONN_RSP 0x03 +#define L2CAP_CONF_REQ 0x04 +#define L2CAP_CONF_RSP 0x05 +#define L2CAP_DISCONN_REQ 0x06 +#define L2CAP_DISCONN_RSP 0x07 +#define L2CAP_ECHO_REQ 0x08 +#define L2CAP_ECHO_RSP 0x09 +#define L2CAP_INFO_REQ 0x0a +#define L2CAP_INFO_RSP 0x0b + +/* L2CAP feature mask */ +#define L2CAP_FEAT_FLOWCTL 0x00000001 +#define L2CAP_FEAT_RETRANS 0x00000002 +#define L2CAP_FEAT_ERTM 0x00000008 +#define L2CAP_FEAT_STREAMING 0x00000010 +#define L2CAP_FEAT_FCS 0x00000020 +#define L2CAP_FEAT_FIXED_CHAN 0x00000080 + +/* L2CAP checksum option */ +#define L2CAP_FCS_NONE 0x00 +#define L2CAP_FCS_CRC16 0x01 /* L2CAP structures */ struct l2cap_hdr { @@ -106,17 +123,23 @@ struct l2cap_conn_rsp { __le16 status; } __attribute__ ((packed)); +/* channel indentifier */ +#define L2CAP_CID_SIGNALING 0x0001 +#define L2CAP_CID_CONN_LESS 0x0002 +#define L2CAP_CID_DYN_START 0x0040 +#define L2CAP_CID_DYN_END 0xffff + /* connect result */ -#define L2CAP_CR_SUCCESS 0x0000 -#define L2CAP_CR_PEND 0x0001 -#define L2CAP_CR_BAD_PSM 0x0002 -#define L2CAP_CR_SEC_BLOCK 0x0003 -#define L2CAP_CR_NO_MEM 0x0004 +#define L2CAP_CR_SUCCESS 0x0000 +#define L2CAP_CR_PEND 0x0001 +#define L2CAP_CR_BAD_PSM 0x0002 +#define L2CAP_CR_SEC_BLOCK 0x0003 +#define L2CAP_CR_NO_MEM 0x0004 /* connect status */ -#define L2CAP_CS_NO_INFO 0x0000 -#define L2CAP_CS_AUTHEN_PEND 0x0001 -#define L2CAP_CS_AUTHOR_PEND 0x0002 +#define L2CAP_CS_NO_INFO 0x0000 +#define L2CAP_CS_AUTHEN_PEND 0x0001 +#define L2CAP_CS_AUTHOR_PEND 0x0002 struct l2cap_conf_req { __le16 dcid; @@ -143,10 +166,14 @@ struct l2cap_conf_opt { } __attribute__ ((packed)); #define L2CAP_CONF_OPT_SIZE 2 +#define L2CAP_CONF_HINT 0x80 +#define L2CAP_CONF_MASK 0x7f + #define L2CAP_CONF_MTU 0x01 #define L2CAP_CONF_FLUSH_TO 0x02 #define L2CAP_CONF_QOS 0x03 #define L2CAP_CONF_RFC 0x04 +#define L2CAP_CONF_FCS 0x05 #define L2CAP_CONF_MAX_SIZE 22 @@ -162,6 +189,8 @@ struct l2cap_conf_rfc { #define L2CAP_MODE_BASIC 0x00 #define L2CAP_MODE_RETRANS 0x01 #define L2CAP_MODE_FLOWCTL 0x02 +#define L2CAP_MODE_ERTM 0x03 +#define L2CAP_MODE_STREAM 0x04 struct l2cap_disconn_req { __le16 dcid; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5389afdc129..1a21895b732 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1,71 +1,220 @@ #ifndef __NET_CFG80211_H #define __NET_CFG80211_H +/* + * 802.11 device and configuration interface + * + * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/netdevice.h> +#include <linux/debugfs.h> +#include <linux/list.h> #include <linux/netlink.h> #include <linux/skbuff.h> #include <linux/nl80211.h> #include <linux/if_ether.h> #include <linux/ieee80211.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> -#include <net/genetlink.h> +#include <net/regulatory.h> + /* remove once we remove the wext stuff */ #include <net/iw_handler.h> +#include <linux/wireless.h> + /* - * 802.11 configuration in-kernel interface + * wireless hardware capability structures + */ + +/** + * enum ieee80211_band - supported frequency bands + * + * The bands are assigned this way because the supported + * bitrates differ in these bands. * - * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> + * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band + * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) */ +enum ieee80211_band { + IEEE80211_BAND_2GHZ, + IEEE80211_BAND_5GHZ, + + /* keep last */ + IEEE80211_NUM_BANDS +}; /** - * struct vif_params - describes virtual interface parameters - * @mesh_id: mesh ID to use - * @mesh_id_len: length of the mesh ID + * enum ieee80211_channel_flags - channel flags + * + * Channel flags set by the regulatory control code. + * + * @IEEE80211_CHAN_DISABLED: This channel is disabled. + * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted + * on this channel. + * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel + * is not permitted. */ -struct vif_params { - u8 *mesh_id; - int mesh_id_len; +enum ieee80211_channel_flags { + IEEE80211_CHAN_DISABLED = 1<<0, + IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, + IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_HT40PLUS = 1<<4, + IEEE80211_CHAN_NO_HT40MINUS = 1<<5, }; -/* Radiotap header iteration - * implemented in net/wireless/radiotap.c - * docs in Documentation/networking/radiotap-headers.txt +#define IEEE80211_CHAN_NO_HT40 \ + (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + +/** + * struct ieee80211_channel - channel definition + * + * This structure describes a single channel for use + * with cfg80211. + * + * @center_freq: center frequency in MHz + * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz + * @hw_value: hardware-specific value for the channel + * @flags: channel flags from &enum ieee80211_channel_flags. + * @orig_flags: channel flags at registration time, used by regulatory + * code to support devices with additional restrictions + * @band: band this channel belongs to. + * @max_antenna_gain: maximum antenna gain in dBi + * @max_power: maximum transmission power (in dBm) + * @beacon_found: helper to regulatory code to indicate when a beacon + * has been found on this channel. Use regulatory_hint_found_beacon() + * to enable this, this is is useful only on 5 GHz band. + * @orig_mag: internal use + * @orig_mpwr: internal use */ +struct ieee80211_channel { + enum ieee80211_band band; + u16 center_freq; + u8 max_bandwidth; + u16 hw_value; + u32 flags; + int max_antenna_gain; + int max_power; + bool beacon_found; + u32 orig_flags; + int orig_mag, orig_mpwr; +}; + /** - * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args - * @rtheader: pointer to the radiotap header we are walking through - * @max_length: length of radiotap header in cpu byte ordering - * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg - * @this_arg: pointer to current radiotap arg - * @arg_index: internal next argument index - * @arg: internal next argument pointer - * @next_bitmap: internal pointer to next present u32 - * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * enum ieee80211_rate_flags - rate flags + * + * Hardware/specification flags for rates. These are structured + * in a way that allows using the same bitrate structure for + * different bands/PHY modes. + * + * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short + * preamble on this bitrate; only relevant in 2.4GHz band and + * with CCK rates. + * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate + * when used with 802.11a (on the 5 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate + * when used with 802.11b (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate + * when used with 802.11g (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. */ +enum ieee80211_rate_flags { + IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, + IEEE80211_RATE_MANDATORY_A = 1<<1, + IEEE80211_RATE_MANDATORY_B = 1<<2, + IEEE80211_RATE_MANDATORY_G = 1<<3, + IEEE80211_RATE_ERP_G = 1<<4, +}; -struct ieee80211_radiotap_iterator { - struct ieee80211_radiotap_header *rtheader; - int max_length; - int this_arg_index; - u8 *this_arg; +/** + * struct ieee80211_rate - bitrate definition + * + * This structure describes a bitrate that an 802.11 PHY can + * operate with. The two values @hw_value and @hw_value_short + * are only for driver use when pointers to this structure are + * passed around. + * + * @flags: rate-specific flags + * @bitrate: bitrate in units of 100 Kbps + * @hw_value: driver/hardware value for this rate + * @hw_value_short: driver/hardware value for this rate when + * short preamble is used + */ +struct ieee80211_rate { + u32 flags; + u16 bitrate; + u16 hw_value, hw_value_short; +}; - int arg_index; - u8 *arg; - __le32 *next_bitmap; - u32 bitmap_shifter; +/** + * struct ieee80211_sta_ht_cap - STA's HT capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11n HT capabilities for an STA. + * + * @ht_supported: is HT supported by the STA + * @cap: HT capabilities map as described in 802.11n spec + * @ampdu_factor: Maximum A-MPDU length factor + * @ampdu_density: Minimum A-MPDU spacing + * @mcs: Supported MCS rates + */ +struct ieee80211_sta_ht_cap { + u16 cap; /* use IEEE80211_HT_CAP_ */ + bool ht_supported; + u8 ampdu_factor; + u8 ampdu_density; + struct ieee80211_mcs_info mcs; }; -extern int ieee80211_radiotap_iterator_init( - struct ieee80211_radiotap_iterator *iterator, - struct ieee80211_radiotap_header *radiotap_header, - int max_length); +/** + * struct ieee80211_supported_band - frequency band definition + * + * This structure describes a frequency band a wiphy + * is able to operate in. + * + * @channels: Array of channels the hardware can operate in + * in this band. + * @band: the band this structure represents + * @n_channels: Number of channels in @channels + * @bitrates: Array of bitrates the hardware can operate with + * in this band. Must be sorted to give a valid "supported + * rates" IE, i.e. CCK rates first, then OFDM. + * @n_bitrates: Number of bitrates in @bitrates + */ +struct ieee80211_supported_band { + struct ieee80211_channel *channels; + struct ieee80211_rate *bitrates; + enum ieee80211_band band; + int n_channels; + int n_bitrates; + struct ieee80211_sta_ht_cap ht_cap; +}; -extern int ieee80211_radiotap_iterator_next( - struct ieee80211_radiotap_iterator *iterator); +/* + * Wireless hardware/device configuration structures and methods + */ +/** + * struct vif_params - describes virtual interface parameters + * @mesh_id: mesh ID to use + * @mesh_id_len: length of the mesh ID + */ +struct vif_params { + u8 *mesh_id; + int mesh_id_len; +}; - /** +/** * struct key_params - key information * * Information about a key @@ -106,27 +255,6 @@ struct beacon_parameters { }; /** - * enum station_flags - station flags - * - * Station capability flags. Note that these must be the bits - * according to the nl80211 flags. - * - * @STATION_FLAG_CHANGED: station flags were changed - * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X) - * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames - * with short preambles - * @STATION_FLAG_WME: station is WME/QoS capable - * @STATION_FLAG_MFP: station uses management frame protection - */ -enum station_flags { - STATION_FLAG_CHANGED = 1<<0, - STATION_FLAG_AUTHORIZED = 1<<NL80211_STA_FLAG_AUTHORIZED, - STATION_FLAG_SHORT_PREAMBLE = 1<<NL80211_STA_FLAG_SHORT_PREAMBLE, - STATION_FLAG_WME = 1<<NL80211_STA_FLAG_WME, - STATION_FLAG_MFP = 1<<NL80211_STA_FLAG_MFP, -}; - -/** * enum plink_action - actions to perform in mesh peers * * @PLINK_ACTION_INVALID: action 0 is reserved @@ -148,14 +276,17 @@ enum plink_actions { * @supported_rates: supported rates in IEEE 802.11 format * (or NULL for no change) * @supported_rates_len: number of supported rates - * @station_flags: station flags (see &enum station_flags) + * @sta_flags_mask: station flags that changed + * (bitmask of BIT(NL80211_STA_FLAG_...)) + * @sta_flags_set: station flags values + * (bitmask of BIT(NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change */ struct station_parameters { u8 *supported_rates; struct net_device *vlan; - u32 station_flags; + u32 sta_flags_mask, sta_flags_set; int listen_interval; u16 aid; u8 supported_rates_len; @@ -348,92 +479,6 @@ struct bss_parameters { u8 basic_rates_len; }; -/** - * enum environment_cap - Environment parsed from country IE - * @ENVIRON_ANY: indicates country IE applies to both indoor and - * outdoor operation. - * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation - * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation - */ -enum environment_cap { - ENVIRON_ANY, - ENVIRON_INDOOR, - ENVIRON_OUTDOOR, -}; - -/** - * struct regulatory_request - used to keep track of regulatory requests - * - * @wiphy_idx: this is set if this request's initiator is - * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This - * can be used by the wireless core to deal with conflicts - * and potentially inform users of which devices specifically - * cased the conflicts. - * @initiator: indicates who sent this request, could be any of - * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) - * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested - * regulatory domain. We have a few special codes: - * 00 - World regulatory domain - * 99 - built by driver but a specific alpha2 cannot be determined - * 98 - result of an intersection between two regulatory domains - * @intersect: indicates whether the wireless core should intersect - * the requested regulatory domain with the presently set regulatory - * domain. - * @country_ie_checksum: checksum of the last processed and accepted - * country IE - * @country_ie_env: lets us know if the AP is telling us we are outdoor, - * indoor, or if it doesn't matter - * @list: used to insert into the reg_requests_list linked list - */ -struct regulatory_request { - int wiphy_idx; - enum nl80211_reg_initiator initiator; - char alpha2[2]; - bool intersect; - u32 country_ie_checksum; - enum environment_cap country_ie_env; - struct list_head list; -}; - -struct ieee80211_freq_range { - u32 start_freq_khz; - u32 end_freq_khz; - u32 max_bandwidth_khz; -}; - -struct ieee80211_power_rule { - u32 max_antenna_gain; - u32 max_eirp; -}; - -struct ieee80211_reg_rule { - struct ieee80211_freq_range freq_range; - struct ieee80211_power_rule power_rule; - u32 flags; -}; - -struct ieee80211_regdomain { - u32 n_reg_rules; - char alpha2[2]; - struct ieee80211_reg_rule reg_rules[]; -}; - -#define MHZ_TO_KHZ(freq) ((freq) * 1000) -#define KHZ_TO_MHZ(freq) ((freq) / 1000) -#define DBI_TO_MBI(gain) ((gain) * 100) -#define MBI_TO_DBI(gain) ((gain) / 100) -#define DBM_TO_MBM(gain) ((gain) * 100) -#define MBM_TO_DBM(gain) ((gain) / 100) - -#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \ - .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ - .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ - .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ - .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \ - .power_rule.max_eirp = DBM_TO_MBM(eirp), \ - .flags = reg_flags, \ - } - struct mesh_config { /* Timeouts in ms */ /* Mesh plink management parameters */ @@ -504,7 +549,7 @@ struct cfg80211_scan_request { int n_ssids; struct ieee80211_channel **channels; u32 n_channels; - u8 *ie; + const u8 *ie; size_t ie_len; /* internal */ @@ -612,6 +657,11 @@ struct cfg80211_auth_request { * @ssid_len: Length of ssid in octets * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets + * @use_mfp: Use management frame protection (IEEE 802.11w) in this association + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. */ struct cfg80211_assoc_request { struct ieee80211_channel *chan; @@ -620,6 +670,8 @@ struct cfg80211_assoc_request { size_t ssid_len; const u8 *ie; size_t ie_len; + bool use_mfp; + bool control_port; }; /** @@ -659,6 +711,60 @@ struct cfg80211_disassoc_request { }; /** + * struct cfg80211_ibss_params - IBSS parameters + * + * This structure defines the IBSS parameters for the join_ibss() + * method. + * + * @ssid: The SSID, will always be non-null. + * @ssid_len: The length of the SSID, will always be non-zero. + * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not + * search for IBSSs with a different BSSID. + * @channel: The channel to use if no IBSS can be found to join. + * @channel_fixed: The channel should be fixed -- do not search for + * IBSSs to join on other channels. + * @ie: information element(s) to include in the beacon + * @ie_len: length of that + * @beacon_interval: beacon interval to use + */ +struct cfg80211_ibss_params { + u8 *ssid; + u8 *bssid; + struct ieee80211_channel *channel; + u8 *ie; + u8 ssid_len, ie_len; + u16 beacon_interval; + bool channel_fixed; +}; + +/** + * enum wiphy_params_flags - set_wiphy_params bitfield values + * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed + * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed + * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed + * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + */ +enum wiphy_params_flags { + WIPHY_PARAM_RETRY_SHORT = 1 << 0, + WIPHY_PARAM_RETRY_LONG = 1 << 1, + WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, + WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, +}; + +/** + * enum tx_power_setting - TX power adjustment + * + * @TX_POWER_AUTOMATIC: the dbm parameter is ignored + * @TX_POWER_LIMITED: limit TX power by the dbm parameter + * @TX_POWER_FIXED: fix TX power to the dbm parameter + */ +enum tx_power_setting { + TX_POWER_AUTOMATIC, + TX_POWER_LIMITED, + TX_POWER_FIXED, +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -688,10 +794,11 @@ struct cfg80211_disassoc_request { * @get_key: get information about the key with the given parameters. * @mac_addr will be %NULL when requesting information for a group * key. All pointers given to the @callback function need not be valid - * after it returns. + * after it returns. This function should return an error if it is + * not possible to retrieve the key, -ENOENT if it doesn't exist. * * @del_key: remove a key given the @mac_addr (%NULL for a group key) - * and @key_index + * and @key_index, return -ENOENT if the key doesn't exist. * * @set_default_key: set the default key on an interface * @@ -733,6 +840,23 @@ struct cfg80211_disassoc_request { * @assoc: Request to (re)associate with the specified peer * @deauth: Request to deauthenticate from the specified peer * @disassoc: Request to disassociate from the specified peer + * + * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call + * cfg80211_ibss_joined(), also call that function when changing BSSID due + * to a merge. + * @leave_ibss: Leave the IBSS. + * + * @set_wiphy_params: Notify that wiphy parameters have changed; + * @changed bitfield (see &enum wiphy_params_flags) describes which values + * have changed. The actual parameter values are available in + * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -747,13 +871,13 @@ struct cfg80211_ops { struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, + u8 key_index, const u8 *mac_addr, struct key_params *params); int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, void *cookie, + u8 key_index, const u8 *mac_addr, void *cookie, void (*callback)(void *cookie, struct key_params*)); int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr); + u8 key_index, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); @@ -818,9 +942,473 @@ struct cfg80211_ops { struct cfg80211_deauth_request *req); int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_disassoc_request *req); + + int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params); + int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum tx_power_setting type, int dbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + void (*rfkill_poll)(struct wiphy *wiphy); }; -/* temporary wext handlers */ +/* + * wireless hardware and networking interfaces structures + * and registration/helper functions + */ + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> + * @custom_regulatory: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). + * @strict_regulatory: tells us the driver for this device will ignore + * regulatory domain settings until it gets its own regulatory domain + * via its regulatory_hint(). After its gets its own regulatory domain + * it will only allow further regulatory domain settings to further + * enhance compliance. For example if channel 13 and 14 are disabled + * by this regulatory domain no user regulatory domain can enable these + * channels at a later time. This can be used for devices which do not + * have calibration information gauranteed for frequencies or settings + * outside of its regulatory domain. + * @reg_notifier: the driver's regulatory notification callback + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. + * @signal_type: signal type reported in &struct cfg80211_bss. + * @cipher_suites: supported cipher suites + * @n_cipher_suites: number of supported cipher suites + * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) + * @retry_long: Retry limit for long frames (dot11LongRetryLimit) + * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); + * -1 = fragmentation disabled, only odd values >= 256 used + * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled + */ +struct wiphy { + /* assign these fields before you register the wiphy */ + + /* permanent MAC address */ + u8 perm_addr[ETH_ALEN]; + + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ + u16 interface_modes; + + bool custom_regulatory; + bool strict_regulatory; + + enum cfg80211_signal_type signal_type; + + int bss_priv_size; + u8 max_scan_ssids; + u16 max_scan_ie_len; + + int n_cipher_suites; + const u32 *cipher_suites; + + u8 retry_short; + u8 retry_long; + u32 frag_threshold; + u32 rts_threshold; + + /* If multiple wiphys are registered and you're handed e.g. + * a regular netdev with assigned ieee80211_ptr, you won't + * know whether it points to a wiphy your driver has registered + * or not. Assign this to something global to your driver to + * help determine whether you own this wiphy or not. */ + const void *privid; + + struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); + + /* fields below are read-only, assigned by cfg80211 */ + + const struct ieee80211_regdomain *regd; + + /* the item in /sys/class/ieee80211/ points to this, + * you need use set_wiphy_dev() (see below) */ + struct device dev; + + /* dir in debugfs: ieee80211/<wiphyname> */ + struct dentry *debugfsdir; + + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); +}; + +/** + * wiphy_priv - return priv from wiphy + * + * @wiphy: the wiphy whose priv pointer to return + */ +static inline void *wiphy_priv(struct wiphy *wiphy) +{ + BUG_ON(!wiphy); + return &wiphy->priv; +} + +/** + * set_wiphy_dev - set device pointer for wiphy + * + * @wiphy: The wiphy whose device to bind + * @dev: The device to parent it to + */ +static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) +{ + wiphy->dev.parent = dev; +} + +/** + * wiphy_dev - get wiphy dev pointer + * + * @wiphy: The wiphy whose device struct to look up + */ +static inline struct device *wiphy_dev(struct wiphy *wiphy) +{ + return wiphy->dev.parent; +} + +/** + * wiphy_name - get wiphy name + * + * @wiphy: The wiphy whose name to return + */ +static inline const char *wiphy_name(struct wiphy *wiphy) +{ + return dev_name(&wiphy->dev); +} + +/** + * wiphy_new - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * The returned pointer must be assigned to each netdev's + * ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); + +/** + * wiphy_register - register a wiphy with cfg80211 + * + * @wiphy: The wiphy to register. + * + * Returns a non-negative wiphy index or a negative error code. + */ +extern int wiphy_register(struct wiphy *wiphy); + +/** + * wiphy_unregister - deregister a wiphy from cfg80211 + * + * @wiphy: The wiphy to unregister. + * + * After this call, no more requests can be made with this priv + * pointer, but the call may sleep to wait for an outstanding + * request that is being handled. + */ +extern void wiphy_unregister(struct wiphy *wiphy); + +/** + * wiphy_free - free wiphy + * + * @wiphy: The wiphy to free + */ +extern void wiphy_free(struct wiphy *wiphy); + +/** + * struct wireless_dev - wireless per-netdev state + * + * This structure must be allocated by the driver/stack + * that uses the ieee80211_ptr field in struct net_device + * (this is intentional so it can be allocated along with + * the netdev.) + * + * @wiphy: pointer to hardware description + * @iftype: interface type + * @list: (private) Used to collect the interfaces + * @netdev: (private) Used to reference back to the netdev + * @current_bss: (private) Used by the internal configuration code + * @bssid: (private) Used by the internal configuration code + * @ssid: (private) Used by the internal configuration code + * @ssid_len: (private) Used by the internal configuration code + * @wext: (private) Used by the internal wireless extensions compat code + * @wext_bssid: (private) Used by the internal wireless extensions compat code + */ +struct wireless_dev { + struct wiphy *wiphy; + enum nl80211_iftype iftype; + + /* private to the generic wireless code */ + struct list_head list; + struct net_device *netdev; + + /* currently used for IBSS - might be rearranged in the future */ + struct cfg80211_bss *current_bss; + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + +#ifdef CONFIG_WIRELESS_EXT + /* wext data */ + struct { + struct cfg80211_ibss_params ibss; + u8 bssid[ETH_ALEN]; + s8 default_key, default_mgmt_key; + } wext; +#endif +}; + +/** + * wdev_priv - return wiphy priv from wireless_dev + * + * @wdev: The wireless device whose wiphy's priv pointer to return + */ +static inline void *wdev_priv(struct wireless_dev *wdev) +{ + BUG_ON(!wdev); + return wiphy_priv(wdev->wiphy); +} + +/* + * Utility functions + */ + +/** + * ieee80211_channel_to_frequency - convert channel number to frequency + */ +extern int ieee80211_channel_to_frequency(int chan); + +/** + * ieee80211_frequency_to_channel - convert frequency to channel number + */ +extern int ieee80211_frequency_to_channel(int freq); + +/* + * Name indirection necessary because the ieee80211 code also has + * a function named "ieee80211_get_channel", so if you include + * cfg80211's header file you get cfg80211's version, if you try + * to include both header files you'll (rightfully!) get a symbol + * clash. + */ +extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, + int freq); +/** + * ieee80211_get_channel - get channel struct from wiphy for specified frequency + */ +static inline struct ieee80211_channel * +ieee80211_get_channel(struct wiphy *wiphy, int freq) +{ + return __ieee80211_get_channel(wiphy, freq); +} + +/** + * ieee80211_get_response_rate - get basic rate for a given rate + * + * @sband: the band to look for rates in + * @basic_rates: bitmap of basic rates + * @bitrate: the bitrate for which to find the basic rate + * + * This function returns the basic rate corresponding to a given + * bitrate, that is the next lower bitrate contained in the basic + * rate map, which is, for this function, given as a bitmap of + * indices of rates in the band's bitrate table. + */ +struct ieee80211_rate * +ieee80211_get_response_rate(struct ieee80211_supported_band *sband, + u32 basic_rates, int bitrate); + +/* + * Radiotap parsing functions -- for controlled injection support + * + * Implemented in net/wireless/radiotap.c + * Documentation in Documentation/networking/radiotap-headers.txt + */ + +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @rtheader: pointer to the radiotap header we are walking through + * @max_length: length of radiotap header in cpu byte ordering + * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg + * @this_arg: pointer to current radiotap arg + * @arg_index: internal next argument index + * @arg: internal next argument pointer + * @next_bitmap: internal pointer to next present u32 + * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *rtheader; + int max_length; + int this_arg_index; + u8 *this_arg; + + int arg_index; + u8 *arg; + __le32 *next_bitmap; + u32 bitmap_shifter; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + +extern const unsigned char rfc1042_header[6]; +extern const unsigned char bridge_tunnel_header[6]; + +/** + * ieee80211_get_hdrlen_from_skb - get header length from data + * + * Given an skb with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + * + * @skb: the frame + */ +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); + +/** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int ieee80211_hdrlen(__le16 fc); + +/** + * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 + * @skb: the 802.11 data frame + * @addr: the device MAC address + * @iftype: the virtual interface type + */ +int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr, + enum nl80211_iftype iftype); + +/** + * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 + * @skb: the 802.3 frame + * @addr: the device MAC address + * @iftype: the virtual interface type + * @bssid: the network bssid (used only for iftype STATION and ADHOC) + * @qos: build 802.11 QoS data frame + */ +int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr, + enum nl80211_iftype iftype, u8 *bssid, bool qos); + +/** + * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame + * @skb: the data frame + */ +unsigned int cfg80211_classify8021d(struct sk_buff *skb); + +/* + * Regulatory helper functions for wiphys + */ + +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * The wiphy must have been registered to cfg80211 prior to this call. + * For cfg80211 drivers this means you must first use wiphy_register(), + * for mac80211 drivers you must first use ieee80211_register_hw(). + * + * Drivers should check the return value, its possible you can get + * an -ENOMEM. + */ +extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * regulatory_hint_11d - hints a country IE as a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @country_ie: pointer to the country IE + * @country_ie_len: length of the country IE + * + * We will intersect the rd with the what CRDA tells us should apply + * for the alpha2 this country IE belongs to, this prevents APs from + * sending us incorrect or outdated information against a country. + */ +extern void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len); +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @desired_bw_khz: the desired max bandwidth you want to use per + * channel. Note that this is still 20 MHz if you want to use HT40 + * as HT40 makes use of two channels for its 40 MHz width bandwidth. + * If set to 0 we'll assume you want the standard 20 MHz. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, + const struct ieee80211_reg_rule **reg_rule); + +/* + * Temporary wext handlers & helper functions + * + * In the future cfg80211 will simply assign the entire wext handler + * structure to netdevs it manages, but we're not there yet. + */ int cfg80211_wext_giwname(struct net_device *dev, struct iw_request_info *info, char *name, char *extra); @@ -834,9 +1422,72 @@ int cfg80211_wext_siwscan(struct net_device *dev, int cfg80211_wext_giwscan(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *extra); +int cfg80211_wext_siwmlme(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); int cfg80211_wext_giwrange(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *extra); +int cfg80211_ibss_wext_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_ibss_wext_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_ibss_wext_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_ibss_wext_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_ibss_wext_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); +int cfg80211_ibss_wext_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); + +struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy, + struct iw_freq *freq); + +int cfg80211_wext_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra); +int cfg80211_wext_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); + +/* + * callbacks for asynchronous cfg80211 methods, notification + * functions and BSS handling helpers + */ /** * cfg80211_scan_done - notify that scan finished @@ -864,6 +1515,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp); +struct cfg80211_bss* +cfg80211_inform_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + u64 timestamp, u16 capability, u16 beacon_interval, + const u8 *ie, size_t ielen, + s32 signal, gfp_t gfp); + struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *bssid, @@ -883,6 +1542,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, const u8 *meshid, size_t meshidlen, const u8 *meshcfg); void cfg80211_put_bss(struct cfg80211_bss *bss); + /** * cfg80211_unlink_bss - unlink BSS from internal data structures * @wiphy: the wiphy @@ -902,44 +1562,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); * @len: length of the frame data * * This function is called whenever an authentication has been processed in - * station mode. + * station mode. The driver is required to call either this function or + * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() + * call. */ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); /** + * cfg80211_send_auth_timeout - notification of timed out authentication + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + */ +void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); + +/** * cfg80211_send_rx_assoc - notification of processed association * @dev: network device * @buf: (re)association response frame (header + body) * @len: length of the frame data * * This function is called whenever a (re)association response has been - * processed in station mode. + * processed in station mode. The driver is required to call either this + * function or cfg80211_send_assoc_timeout() to indicate the result of + * cfg80211_ops::assoc() call. */ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_rx_deauth - notification of processed deauthentication + * cfg80211_send_assoc_timeout - notification of timed out association + * @dev: network device + * @addr: The MAC address of the device with which the association timed out + */ +void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_deauth - notification of processed deauthentication * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data * * This function is called whenever deauthentication has been processed in - * station mode. + * station mode. This includes both received deauthentication frames and + * locally generated ones. */ -void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_rx_disassoc - notification of processed disassociation + * cfg80211_send_disassoc - notification of processed disassociation * @dev: network device * @buf: disassociation response frame (header + body) * @len: length of the frame data * * This function is called whenever disassociation has been processed in - * station mode. + * station mode. This includes both received disassociation frames and locally + * generated ones. */ -void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_hold_bss - exclude bss from expiration @@ -958,4 +1636,55 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss); */ void cfg80211_unhold_bss(struct cfg80211_bss *bss); +/** + * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) + * @dev: network device + * @addr: The source MAC address of the frame + * @key_type: The key type that the received frame used + * @key_id: Key identifier (0..3) + * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) + * + * This function is called whenever the local MAC detects a MIC failure in a + * received frame. This matches with MLME-MICHAELMICFAILURE.indication() + * primitive. + */ +void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, + enum nl80211_key_type key_type, int key_id, + const u8 *tsc); + +/** + * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS + * + * @dev: network device + * @bssid: the BSSID of the IBSS joined + * @gfp: allocation flags + * + * This function notifies cfg80211 that the device joined an IBSS or + * switched to a different BSSID. Before this function can be called, + * either a beacon has to have been received from the IBSS, or one of + * the cfg80211_inform_bss{,_frame} functions must have been called + * with the locally generated beacon -- this guarantees that there is + * always a scan result for this IBSS. cfg80211 will handle the rest. + */ +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); + +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/dst.h b/include/net/dst.h index 6be3b082a07..7fc409c19b3 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -195,6 +195,12 @@ struct dst_entry * dst_clone(struct dst_entry * dst) } extern void dst_release(struct dst_entry *dst); +static inline void skb_dst_drop(struct sk_buff *skb) +{ + if (skb->_skb_dst) + dst_release(skb_dst(skb)); + skb->_skb_dst = 0UL; +} /* Children define the path of the packet through the * Linux networking. Thus, destinations are stackable. @@ -246,7 +252,7 @@ static inline void dst_negative_advice(struct dst_entry **dst_p) static inline void dst_link_failure(struct sk_buff *skb) { - struct dst_entry * dst = skb->dst; + struct dst_entry *dst = skb_dst(skb); if (dst && dst->ops && dst->ops->link_failure) dst->ops->link_failure(skb); } @@ -265,13 +271,13 @@ static inline void dst_set_expires(struct dst_entry *dst, int timeout) /* Output packet to network from transport. */ static inline int dst_output(struct sk_buff *skb) { - return skb->dst->output(skb); + return skb_dst(skb)->output(skb); } /* Input packet from network to transport. */ static inline int dst_input(struct sk_buff *skb) { - return skb->dst->input(skb); + return skb_dst(skb)->input(skb); } static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie) diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h index c2bb5cae651..ca4b2e84007 100644 --- a/include/net/fib_rules.h +++ b/include/net/fib_rules.h @@ -48,14 +48,12 @@ struct fib_rules_ops struct flowi *, int); int (*configure)(struct fib_rule *, struct sk_buff *, - struct nlmsghdr *, struct fib_rule_hdr *, struct nlattr **); int (*compare)(struct fib_rule *, struct fib_rule_hdr *, struct nlattr **); int (*fill)(struct fib_rule *, struct sk_buff *, - struct nlmsghdr *, struct fib_rule_hdr *); u32 (*default_pref)(struct fib_rules_ops *ops); size_t (*nlmsg_payload)(struct fib_rule *); diff --git a/include/net/genetlink.h b/include/net/genetlink.h index 747c255d1df..1b0e3ee4ddd 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -88,6 +88,8 @@ struct genl_ops }; extern int genl_register_family(struct genl_family *family); +extern int genl_register_family_with_ops(struct genl_family *family, + struct genl_ops *ops, size_t n_ops); extern int genl_unregister_family(struct genl_family *family); extern int genl_register_ops(struct genl_family *, struct genl_ops *ops); extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops); diff --git a/include/net/ieee802154/af_ieee802154.h b/include/net/ieee802154/af_ieee802154.h new file mode 100644 index 00000000000..0d78605fb1a --- /dev/null +++ b/include/net/ieee802154/af_ieee802154.h @@ -0,0 +1,60 @@ +/* + * IEEE 802.15.4 inteface for userspace + * + * Copyright 2007, 2008 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Sergey Lapin <slapin@ossfans.org> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef _AF_IEEE802154_H +#define _AF_IEEE802154_H + +#include <linux/socket.h> /* for sa_family_t */ + +enum { + IEEE802154_ADDR_NONE = 0x0, + /* RESERVED = 0x01, */ + IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */ + IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */ +}; + +/* address length, octets */ +#define IEEE802154_ADDR_LEN 8 + +struct ieee802154_addr { + int addr_type; + u16 pan_id; + union { + u8 hwaddr[IEEE802154_ADDR_LEN]; + u16 short_addr; + }; +}; + +#define IEEE802154_PANID_BROADCAST 0xffff +#define IEEE802154_ADDR_BROADCAST 0xffff +#define IEEE802154_ADDR_UNDEF 0xfffe + +struct sockaddr_ieee802154 { + sa_family_t family; /* AF_IEEE802154 */ + struct ieee802154_addr addr; +}; + +/* master device */ +#define IEEE802154_SIOC_ADD_SLAVE (SIOCDEVPRIVATE + 0) + +#endif diff --git a/include/net/ieee802154/mac_def.h b/include/net/ieee802154/mac_def.h new file mode 100644 index 00000000000..8cb68463565 --- /dev/null +++ b/include/net/ieee802154/mac_def.h @@ -0,0 +1,160 @@ +/* + * IEEE802.15.4-2003 specification + * + * Copyright (C) 2007, 2008 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Pavel Smolenskiy <pavel.smolenskiy@gmail.com> + * Maxim Gorbachyov <maxim.gorbachev@siemens.com> + * Maxim Osipov <maxim.osipov@siemens.com> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef IEEE802154_MAC_DEF_H +#define IEEE802154_MAC_DEF_H + +#define IEEE802154_FC_TYPE_BEACON 0x0 /* Frame is beacon */ +#define IEEE802154_FC_TYPE_DATA 0x1 /* Frame is data */ +#define IEEE802154_FC_TYPE_ACK 0x2 /* Frame is acknowledgment */ +#define IEEE802154_FC_TYPE_MAC_CMD 0x3 /* Frame is MAC command */ + +#define IEEE802154_FC_TYPE_SHIFT 0 +#define IEEE802154_FC_TYPE_MASK ((1 << 3) - 1) +#define IEEE802154_FC_TYPE(x) ((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT) +#define IEEE802154_FC_SET_TYPE(v, x) do { \ + v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \ + (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \ + } while (0) + +#define IEEE802154_FC_SECEN (1 << 3) +#define IEEE802154_FC_FRPEND (1 << 4) +#define IEEE802154_FC_ACK_REQ (1 << 5) +#define IEEE802154_FC_INTRA_PAN (1 << 6) + +#define IEEE802154_FC_SAMODE_SHIFT 14 +#define IEEE802154_FC_SAMODE_MASK (3 << IEEE802154_FC_SAMODE_SHIFT) +#define IEEE802154_FC_DAMODE_SHIFT 10 +#define IEEE802154_FC_DAMODE_MASK (3 << IEEE802154_FC_DAMODE_SHIFT) + +#define IEEE802154_FC_SAMODE(x) \ + (((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT) + +#define IEEE802154_FC_DAMODE(x) \ + (((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT) + + +/* MAC's Command Frames Identifiers */ +#define IEEE802154_CMD_ASSOCIATION_REQ 0x01 +#define IEEE802154_CMD_ASSOCIATION_RESP 0x02 +#define IEEE802154_CMD_DISASSOCIATION_NOTIFY 0x03 +#define IEEE802154_CMD_DATA_REQ 0x04 +#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY 0x05 +#define IEEE802154_CMD_ORPHAN_NOTIFY 0x06 +#define IEEE802154_CMD_BEACON_REQ 0x07 +#define IEEE802154_CMD_COORD_REALIGN_NOTIFY 0x08 +#define IEEE802154_CMD_GTS_REQ 0x09 + +/* + * The return values of MAC operations + */ +enum { + /* + * The requested operation was completed successfully. + * For a transmission request, this value indicates + * a successful transmission. + */ + IEEE802154_SUCCESS = 0x0, + + /* The beacon was lost following a synchronization request. */ + IEEE802154_BEACON_LOSS = 0xe0, + /* + * A transmission could not take place due to activity on the + * channel, i.e., the CSMA-CA mechanism has failed. + */ + IEEE802154_CHNL_ACCESS_FAIL = 0xe1, + /* The GTS request has been denied by the PAN coordinator. */ + IEEE802154_DENINED = 0xe2, + /* The attempt to disable the transceiver has failed. */ + IEEE802154_DISABLE_TRX_FAIL = 0xe3, + /* + * The received frame induces a failed security check according to + * the security suite. + */ + IEEE802154_FAILED_SECURITY_CHECK = 0xe4, + /* + * The frame resulting from secure processing has a length that is + * greater than aMACMaxFrameSize. + */ + IEEE802154_FRAME_TOO_LONG = 0xe5, + /* + * The requested GTS transmission failed because the specified GTS + * either did not have a transmit GTS direction or was not defined. + */ + IEEE802154_INVALID_GTS = 0xe6, + /* + * A request to purge an MSDU from the transaction queue was made using + * an MSDU handle that was not found in the transaction table. + */ + IEEE802154_INVALID_HANDLE = 0xe7, + /* A parameter in the primitive is out of the valid range.*/ + IEEE802154_INVALID_PARAMETER = 0xe8, + /* No acknowledgment was received after aMaxFrameRetries. */ + IEEE802154_NO_ACK = 0xe9, + /* A scan operation failed to find any network beacons.*/ + IEEE802154_NO_BEACON = 0xea, + /* No response data were available following a request. */ + IEEE802154_NO_DATA = 0xeb, + /* The operation failed because a short address was not allocated. */ + IEEE802154_NO_SHORT_ADDRESS = 0xec, + /* + * A receiver enable request was unsuccessful because it could not be + * completed within the CAP. + */ + IEEE802154_OUT_OF_CAP = 0xed, + /* + * A PAN identifier conflict has been detected and communicated to the + * PAN coordinator. + */ + IEEE802154_PANID_CONFLICT = 0xee, + /* A coordinator realignment command has been received. */ + IEEE802154_REALIGMENT = 0xef, + /* The transaction has expired and its information discarded. */ + IEEE802154_TRANSACTION_EXPIRED = 0xf0, + /* There is no capacity to store the transaction. */ + IEEE802154_TRANSACTION_OVERFLOW = 0xf1, + /* + * The transceiver was in the transmitter enabled state when the + * receiver was requested to be enabled. + */ + IEEE802154_TX_ACTIVE = 0xf2, + /* The appropriate key is not available in the ACL. */ + IEEE802154_UNAVAILABLE_KEY = 0xf3, + /* + * A SET/GET request was issued with the identifier of a PIB attribute + * that is not supported. + */ + IEEE802154_UNSUPPORTED_ATTR = 0xf4, + /* + * A request to perform a scan operation failed because the MLME was + * in the process of performing a previously initiated scan operation. + */ + IEEE802154_SCAN_IN_PROGRESS = 0xfc, +}; + + +#endif + + diff --git a/include/net/ieee802154/netdevice.h b/include/net/ieee802154/netdevice.h new file mode 100644 index 00000000000..e2506af3e7c --- /dev/null +++ b/include/net/ieee802154/netdevice.h @@ -0,0 +1,115 @@ +/* + * An interface between IEEE802.15.4 device and rest of the kernel. + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Pavel Smolenskiy <pavel.smolenskiy@gmail.com> + * Maxim Gorbachyov <maxim.gorbachev@siemens.com> + * Maxim Osipov <maxim.osipov@siemens.com> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef IEEE802154_NETDEVICE_H +#define IEEE802154_NETDEVICE_H + +/* + * A control block of skb passed between the ARPHRD_IEEE802154 device + * and other stack parts. + */ +struct ieee802154_mac_cb { + u8 lqi; + struct ieee802154_addr sa; + struct ieee802154_addr da; + u8 flags; + u8 seq; +}; + +static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb) +{ + return (struct ieee802154_mac_cb *)skb->cb; +} + +#define MAC_CB_FLAG_TYPEMASK ((1 << 3) - 1) + +#define MAC_CB_FLAG_ACKREQ (1 << 3) +#define MAC_CB_FLAG_SECEN (1 << 4) +#define MAC_CB_FLAG_INTRAPAN (1 << 5) + +static inline int mac_cb_is_ackreq(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ; +} + +static inline int mac_cb_is_secen(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN; +} + +static inline int mac_cb_is_intrapan(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN; +} + +static inline int mac_cb_type(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK; +} + +#define IEEE802154_MAC_SCAN_ED 0 +#define IEEE802154_MAC_SCAN_ACTIVE 1 +#define IEEE802154_MAC_SCAN_PASSIVE 2 +#define IEEE802154_MAC_SCAN_ORPHAN 3 + +/* + * This should be located at net_device->ml_priv + */ +struct ieee802154_mlme_ops { + int (*assoc_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 channel, u8 cap); + int (*assoc_resp)(struct net_device *dev, + struct ieee802154_addr *addr, + u16 short_addr, u8 status); + int (*disassoc_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 reason); + int (*start_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 channel, u8 bcn_ord, u8 sf_ord, + u8 pan_coord, u8 blx, u8 coord_realign); + int (*scan_req)(struct net_device *dev, + u8 type, u32 channels, u8 duration); + + /* + * FIXME: these should become the part of PIB/MIB interface. + * However we still don't have IB interface of any kind + */ + u16 (*get_pan_id)(struct net_device *dev); + u16 (*get_short_addr)(struct net_device *dev); + u8 (*get_dsn)(struct net_device *dev); + u8 (*get_bsn)(struct net_device *dev); +}; + +static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops( + struct net_device *dev) +{ + return dev->ml_priv; +} + +#endif + + diff --git a/include/net/ieee802154/nl802154.h b/include/net/ieee802154/nl802154.h new file mode 100644 index 00000000000..78efcdf52b5 --- /dev/null +++ b/include/net/ieee802154/nl802154.h @@ -0,0 +1,41 @@ +/* + * nl802154.h + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef IEEE802154_NL_H +#define IEEE802154_NL_H + +struct net_device; +struct ieee802154_addr; + +int ieee802154_nl_assoc_indic(struct net_device *dev, + struct ieee802154_addr *addr, u8 cap); +int ieee802154_nl_assoc_confirm(struct net_device *dev, + u16 short_addr, u8 status); +int ieee802154_nl_disassoc_indic(struct net_device *dev, + struct ieee802154_addr *addr, u8 reason); +int ieee802154_nl_disassoc_confirm(struct net_device *dev, + u8 status); +int ieee802154_nl_scan_confirm(struct net_device *dev, + u8 status, u8 scan_type, u32 unscanned, + u8 *edl/*, struct list_head *pan_desc_list */); +int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid, + u16 coord_addr); + +#endif diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h index f74665d7bea..22c73a77cd9 100644 --- a/include/net/inet6_hashtables.h +++ b/include/net/inet6_hashtables.h @@ -100,7 +100,7 @@ static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo, if (unlikely(sk = skb_steal_sock(skb))) return sk; - else return __inet6_lookup(dev_net(skb->dst->dev), hashinfo, + else return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo, &ipv6_hdr(skb)->saddr, sport, &ipv6_hdr(skb)->daddr, ntohs(dport), inet6_iif(skb)); diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index a44e2248b2e..d522dcf3031 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -385,7 +385,7 @@ static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo, if (unlikely(sk = skb_steal_sock(skb))) return sk; else - return __inet_lookup(dev_net(skb->dst->dev), hashinfo, + return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo, iph->saddr, sport, iph->daddr, dport, inet_iif(skb)); } diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index de0ecc71cf0..20a6957af87 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -130,7 +130,8 @@ struct inet_sock { freebind:1, hdrincl:1, mc_loop:1, - transparent:1; + transparent:1, + mc_all:1; int mc_index; __be32 mc_addr; struct ip_mc_socklist *mc_list; diff --git a/include/net/ip.h b/include/net/ip.h index 4ac7577f98d..72c36926c26 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -168,7 +168,10 @@ struct ipv4_config extern struct ipv4_config ipv4_config; #define IP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.ip_statistics, field) #define IP_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.ip_statistics, field) +#define IP_ADD_STATS(net, field, val) SNMP_ADD_STATS((net)->mib.ip_statistics, field, val) #define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val) +#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS((net)->mib.ip_statistics, field, val) +#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS_BH((net)->mib.ip_statistics, field, val) #define NET_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.net_statistics, field) #define NET_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.net_statistics, field) #define NET_INC_STATS_USER(net, field) SNMP_INC_STATS_USER((net)->mib.net_statistics, field) diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 5f53db7e4e5..0e1b8aebaff 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -142,7 +142,7 @@ static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst, static inline int ipv6_unicast_destination(struct sk_buff *skb) { - struct rt6_info *rt = (struct rt6_info *) skb->dst; + struct rt6_info *rt = (struct rt6_info *) skb_dst(skb); return rt->rt6i_flags & RTF_LOCAL; } diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 8b12667f7a2..ef91fe924ba 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -124,14 +124,12 @@ struct fib_result_nl { #ifdef CONFIG_IP_ROUTE_MULTIPATH #define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel]) -#define FIB_RES_RESET(res) ((res).nh_sel = 0) #define FIB_TABLE_HASHSZ 2 #else /* CONFIG_IP_ROUTE_MULTIPATH */ #define FIB_RES_NH(res) ((res).fi->fib_nh[0]) -#define FIB_RES_RESET(res) #define FIB_TABLE_HASHSZ 256 @@ -145,7 +143,6 @@ struct fib_result_nl { struct fib_table { struct hlist_node tb_hlist; u32 tb_id; - unsigned tb_stamp; int tb_default; int (*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res); int (*tb_insert)(struct fib_table *, struct fib_config *); diff --git a/include/net/ipip.h b/include/net/ipip.h index fdf9bd74370..5d3036fa151 100644 --- a/include/net/ipip.h +++ b/include/net/ipip.h @@ -28,11 +28,18 @@ struct ip_tunnel unsigned int prl_count; /* # of entries in PRL */ }; +/* ISATAP: default interval between RS in secondy */ +#define IPTUNNEL_RS_DEFAULT_DELAY (900) + struct ip_tunnel_prl_entry { struct ip_tunnel_prl_entry *next; __be32 addr; u16 flags; + unsigned long rs_delay; + struct timer_list rs_timer; + struct ip_tunnel *tunnel; + spinlock_t lock; }; #define IPTUNNEL_XMIT() do { \ diff --git a/include/net/ipv6.h b/include/net/ipv6.h index c1f16fc49ad..f27fd83d67d 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -126,15 +126,28 @@ extern struct ctl_path net_ipv6_ctl_path[]; SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\ }) +#define _DEVUPD(net, statname, modifier, idev, field, val) \ +({ \ + struct inet6_dev *_idev = (idev); \ + if (likely(_idev != NULL)) \ + SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \ + SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\ +}) + /* MIBs */ #define IP6_INC_STATS(net, idev,field) \ _DEVINC(net, ipv6, , idev, field) #define IP6_INC_STATS_BH(net, idev,field) \ _DEVINC(net, ipv6, _BH, idev, field) +#define IP6_ADD_STATS(net, idev,field,val) \ + _DEVADD(net, ipv6, , idev, field, val) #define IP6_ADD_STATS_BH(net, idev,field,val) \ _DEVADD(net, ipv6, _BH, idev, field, val) - +#define IP6_UPD_PO_STATS(net, idev,field,val) \ + _DEVUPD(net, ipv6, , idev, field, val) +#define IP6_UPD_PO_STATS_BH(net, idev,field,val) \ + _DEVUPD(net, ipv6, _BH, idev, field, val) #define ICMP6_INC_STATS(net, idev, field) \ _DEVINC(net, icmpv6, , idev, field) #define ICMP6_INC_STATS_BH(net, idev, field) \ diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index 85f80eadfa3..21ee49ffcba 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -73,8 +73,17 @@ struct iucv_sock { struct sk_buff_head backlog_skb_q; struct sock_msg_q message_q; unsigned int send_tag; + u8 flags; + u16 msglimit; }; +/* iucv socket options (SOL_IUCV) */ +#define SO_IPRMDATA_MSG 0x0080 /* send/recv IPRM_DATA msgs */ +#define SO_MSGLIMIT 0x1000 /* get/set IUCV MSGLIMIT */ + +/* iucv related control messages (scm) */ +#define SCM_IUCV_TRGCLS 0x0001 /* target class control message */ + struct iucv_sock_list { struct hlist_head head; rwlock_t lock; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3b83a80e3fe..c0610447697 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -19,7 +19,6 @@ #include <linux/wireless.h> #include <linux/device.h> #include <linux/ieee80211.h> -#include <net/wireless.h> #include <net/cfg80211.h> /** @@ -74,22 +73,6 @@ */ /** - * struct ieee80211_ht_bss_info - describing BSS's HT characteristics - * - * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS. - * - * @primary_channel: channel number of primery channel - * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) - * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection) - */ -struct ieee80211_ht_bss_info { - u8 primary_channel; - u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */ - u8 bss_op_mode; /* use IEEE80211_HT_IE_ */ -}; - -/** * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. @@ -150,6 +133,13 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_ERP_SLOT: slot timing changed * @BSS_CHANGED_HT: 802.11n parameters changed * @BSS_CHANGED_BASIC_RATES: Basic rateset changed + * @BSS_CHANGED_BEACON_INT: Beacon interval changed + * @BSS_CHANGED_BSSID: BSSID changed, for whatever + * reason (IBSS and managed mode) + * @BSS_CHANGED_BEACON: Beacon data changed, retrieve + * new beacon (beaconing modes) + * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be + * enabled/disabled (beaconing modes) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -158,14 +148,10 @@ enum ieee80211_bss_change { BSS_CHANGED_ERP_SLOT = 1<<3, BSS_CHANGED_HT = 1<<4, BSS_CHANGED_BASIC_RATES = 1<<5, -}; - -/** - * struct ieee80211_bss_ht_conf - BSS's changing HT configuration - * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info) - */ -struct ieee80211_bss_ht_conf { - u16 operation_mode; + BSS_CHANGED_BEACON_INT = 1<<6, + BSS_CHANGED_BSSID = 1<<7, + BSS_CHANGED_BEACON = 1<<8, + BSS_CHANGED_BEACON_ENABLED = 1<<9, }; /** @@ -187,12 +173,16 @@ struct ieee80211_bss_ht_conf { * @timestamp: beacon timestamp * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp - * @ht: BSS's HT configuration * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @bssid: The BSSID for this BSS + * @enable_beacon: whether beaconing should be enabled or not + * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). + * This field is only valid when the channel type is one of the HT types. */ struct ieee80211_bss_conf { + const u8 *bssid; /* association related data */ bool assoc; u16 aid; @@ -200,12 +190,13 @@ struct ieee80211_bss_conf { bool use_cts_prot; bool use_short_preamble; bool use_short_slot; + bool enable_beacon; u8 dtim_period; u16 beacon_int; u16 assoc_capability; u64 timestamp; u32 basic_rates; - struct ieee80211_bss_ht_conf ht; + u16 ht_operation_mode; }; /** @@ -248,6 +239,8 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. + * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211, + * used to indicate that a frame was already retried due to PS */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -265,6 +258,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), + IEEE80211_TX_INTFL_RETRIED = BIT(15), }; /** @@ -518,52 +512,76 @@ struct ieee80211_rx_status { * Flags to define PHY configuration options * * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) - * @IEEE80211_CONF_PS: Enable 802.11 power save mode + * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) + * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set + * the driver should be prepared to handle configuration requests but + * may turn the device off as much as possible. Typically, this flag will + * be set when an interface is set UP but not associated or scanning, but + * it can also be unset in that case when monitor interfaces are active. */ enum ieee80211_conf_flags { IEEE80211_CONF_RADIOTAP = (1<<0), IEEE80211_CONF_PS = (1<<1), + IEEE80211_CONF_IDLE = (1<<2), }; /** * enum ieee80211_conf_changed - denotes which configuration changed * - * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed - * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed + * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed - * @IEEE80211_CONF_CHANGE_PS: the PS flag changed - * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed + * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { - IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), - IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), + _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), - IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5), - IEEE80211_CONF_CHANGE_POWER = BIT(6), - IEEE80211_CONF_CHANGE_CHANNEL = BIT(7), - IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8), + IEEE80211_CONF_CHANGE_POWER = BIT(5), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), + IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; +static inline __deprecated enum ieee80211_conf_changed +__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) +{ + return _IEEE80211_CONF_CHANGE_RADIO_ENABLED; +} +#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \ + __IEEE80211_CONF_CHANGE_RADIO_ENABLED() + /** * struct ieee80211_conf - configuration of the device * * This struct indicates how the driver shall configure the hardware. * + * @flags: configuration flags defined above + * * @radio_enabled: when zero, driver is required to switch off the radio. - * @beacon_int: beacon interval (TODO make interface config) + * @beacon_int: DEPRECATED, DO NOT USE + * * @listen_interval: listen interval in units of beacon interval - * @flags: configuration flags defined above + * @max_sleep_period: the maximum number of beacon intervals to sleep for + * before checking the beacon for a TIM bit (managed mode only); this + * value will be only achievable between DTIM frames, the hardware + * needs to check for the multicast traffic bit in DTIM beacons. + * This variable is valid only when the CONF_PS flag is set. + * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the + * powersave documentation below. This variable is valid only when + * the CONF_PS flag is set. + * * @power_level: requested transmit power (in dBm) - * @dynamic_ps_timeout: dynamic powersave timeout (in ms) + * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, * but actually means the number of transmissions not the number of retries @@ -572,12 +590,13 @@ enum ieee80211_conf_changed { * number of transmissions not the number of retries */ struct ieee80211_conf { - int beacon_int; + int __deprecated beacon_int; u32 flags; int power_level, dynamic_ps_timeout; + int max_sleep_period; u16 listen_interval; - bool radio_enabled; + bool __deprecated radio_enabled; u8 long_frame_max_tx_count, short_frame_max_tx_count; @@ -640,37 +659,6 @@ struct ieee80211_if_init_conf { }; /** - * enum ieee80211_if_conf_change - interface config change flags - * - * @IEEE80211_IFCC_BSSID: The BSSID changed. - * @IEEE80211_IFCC_BEACON: The beacon for this interface changed - * (currently AP and MESH only), use ieee80211_beacon_get(). - * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed. - */ -enum ieee80211_if_conf_change { - IEEE80211_IFCC_BSSID = BIT(0), - IEEE80211_IFCC_BEACON = BIT(1), - IEEE80211_IFCC_BEACON_ENABLED = BIT(2), -}; - -/** - * struct ieee80211_if_conf - configuration of an interface - * - * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. - * @bssid: BSSID of the network we are associated to/creating. - * @enable_beacon: Indicates whether beacons can be sent. - * This is valid only for AP/IBSS/MESH modes. - * - * This structure is passed to the config_interface() callback of - * &struct ieee80211_hw. - */ -struct ieee80211_if_conf { - u32 changed; - const u8 *bssid; - bool enable_beacon; -}; - -/** * enum ieee80211_key_alg - key algorithm * @ALG_WEP: WEP40 or WEP104 * @ALG_TKIP: TKIP @@ -685,16 +673,6 @@ enum ieee80211_key_alg { }; /** - * enum ieee80211_key_len - key length - * @LEN_WEP40: WEP 5-byte long key - * @LEN_WEP104: WEP 13-byte long key - */ -enum ieee80211_key_len { - LEN_WEP40 = 5, - LEN_WEP104 = 13, -}; - -/** * enum ieee80211_key_flags - key flags * * These flags are used for communication about keys between the driver @@ -1109,11 +1087,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * need software support for parsing the TIM bitmap. This is also supported * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still - * required to pass up beacons. Additionally, in this case, mac80211 will - * wake up the hardware when multicast traffic is announced in the beacon. - * - * FIXME: I don't think we can be fast enough in software when we want to - * receive multicast traffic? + * required to pass up beacons. The hardware is still required to handle + * waking up for multicast traffic; if it cannot the driver must handle that + * as best as it can, mac80211 is too slow. * * Dynamic powersave mode is an extension to normal powersave mode in which * the hardware stays awake for a user-specified period of time after sending @@ -1134,11 +1110,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag. - * The driver needs to enable beacon filter support whenever power save is - * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled, - * the stack will not check for beacon miss at all and the driver needs to - * notify about complete loss of beacons with ieee80211_beacon_loss(). + * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER + * hardware capability. The driver needs to enable beacon filter support + * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When + * power save is enabled, the stack will not check for beacon loss and the + * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). + * + * The time (or number of beacons missed) until the firmware notifies the + * driver of a beacon loss event (which in turn causes the driver to call + * ieee80211_beacon_loss()) should be configurable and will be controlled + * by mac80211 and the roaming algorithm in the future. + * + * Since there may be constantly changing information elements that nothing + * in the software stack cares about, we will, in the future, have mac80211 + * tell the driver which information elements are interesting in the sense + * that we want to see changes in them. This will include + * - a list of information element IDs + * - a list of OUIs for the vendor information element + * + * Ideally, the hardware would filter out any beacons without changes in the + * requested elements, but if it cannot support that it may, at the expense + * of some efficiency, filter out only a subset. For example, if the device + * doesn't support checking for OUIs it should pass up all changes in all + * vendor information elements. + * + * Note that change, for the sake of simplification, also includes information + * elements appearing or disappearing from the beacon. + * + * Some hardware supports an "ignore list" instead, just make sure nothing + * that was requested is on the ignore list, and include commonly changing + * information element IDs in the ignore list, for example 11 (BSS load) and + * the various vendor-assigned IEs with unknown contents (128, 129, 133-136, + * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility + * it could also include some currently unused IDs. + * + * + * In addition to these capabilities, hardware should support notifying the + * host of changes in the beacon RSSI. This is relevant to implement roaming + * when no traffic is flowing (when traffic is flowing we see the RSSI of + * the received data packets). This can consist in notifying the host when + * the RSSI changes significantly or when it drops below or rises above + * configurable thresholds. In the future these thresholds will also be + * configured by mac80211 (which gets them from userspace) to implement + * them as the roaming algorithm requires. + * + * If the hardware cannot implement this, the driver should ask it to + * periodically pass beacon frames to the host so that software can do the + * signal strength threshold checking. */ /** @@ -1298,10 +1316,6 @@ enum ieee80211_ampdu_mlme_action { * This function should never fail but returns a negative error code * if it does. * - * @config_interface: Handler for configuration requests related to interfaces - * (e.g. BSSID changes.) - * Returns a negative error code which will be seen in userspace. - * * @bss_info_changed: Handler for configuration requests related to BSS * parameters that may vary during BSS's lifespan, and may affect low * level driver (e.g. assoc/disassoc status, erp parameters). @@ -1330,11 +1344,14 @@ enum ieee80211_ampdu_mlme_action { * the scan state machine in stack. The scan must honour the channel * configuration done by the regulatory agent in the wiphy's * registered bands. The hardware (or the driver) needs to make sure - * that power save is disabled. When the scan finishes, - * ieee80211_scan_completed() must be called; note that it also must - * be called when the scan cannot finish because the hardware is - * turned off! Anything else is a bug! Returns a negative error code - * which will be seen in userspace. + * that power save is disabled. + * The @req ie/ie_len members are rewritten by mac80211 to contain the + * entire IEs after the SSID, so that drivers need not look at these + * at all but just send them after the SSID -- mac80211 includes the + * (extended) supported rates and HT information (where applicable). + * When the scan finishes, ieee80211_scan_completed() must be called; + * note that it also must be called when the scan cannot finish due to + * any error unless this callback returned a negative error code. * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. @@ -1390,6 +1407,10 @@ enum ieee80211_ampdu_mlme_action { * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. * Returns a negative error code on failure. + * + * @rfkill_poll: Poll rfkill hardware state. If you need this, you also + * need to set wiphy->rfkill_poll to %true before registration, + * and need to call wiphy_rfkill_set_hw_state() in the callback. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1400,9 +1421,6 @@ struct ieee80211_ops { void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); int (*config)(struct ieee80211_hw *hw, u32 changed); - int (*config_interface)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -1441,6 +1459,8 @@ struct ieee80211_ops { int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); + + void (*rfkill_poll)(struct ieee80211_hw *hw); }; /** @@ -1572,6 +1592,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw); */ void ieee80211_free_hw(struct ieee80211_hw *hw); +/** + * ieee80211_restart_hw - restart hardware completely + * + * Call this function when the hardware was restarted for some reason + * (hardware error, ...) and the driver is unable to restore its state + * by itself. mac80211 assumes that at this point the driver/hardware + * is completely uninitialised and stopped, it starts the process by + * calling the ->start() operation. The driver will need to reset all + * internal state that it has prior to calling this function. + * + * @hw: the hardware to restart + */ +void ieee80211_restart_hw(struct ieee80211_hw *hw); + /* trick to avoid symbol clashes with the ieee80211 subsystem */ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_rx_status *status); @@ -1775,24 +1809,6 @@ struct sk_buff * ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** - * ieee80211_get_hdrlen_from_skb - get header length from data - * - * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. - * - * @skb: the frame - */ -unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); - -/** - * ieee80211_hdrlen - get header length in bytes from frame control - * @fc: frame control field in little-endian format - */ -unsigned int ieee80211_hdrlen(__le16 fc); - -/** * ieee80211_get_tkip_key - get a TKIP rc4 for skb * * This function computes a TKIP rc4 key for an skb. It computes diff --git a/include/net/netfilter/ipv4/nf_conntrack_icmp.h b/include/net/netfilter/ipv4/nf_conntrack_icmp.h deleted file mode 100644 index 3dd22cff23e..00000000000 --- a/include/net/netfilter/ipv4/nf_conntrack_icmp.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _NF_CONNTRACK_ICMP_H -#define _NF_CONNTRACK_ICMP_H -/* ICMP tracking. */ -#include <asm/atomic.h> - -struct ip_ct_icmp -{ - /* Optimization: when number in == number out, forget immediately. */ - atomic_t count; -}; -#endif /* _NF_CONNTRACK_ICMP_H */ diff --git a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h index 86591afda29..67edd50a398 100644 --- a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h +++ b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h @@ -9,7 +9,6 @@ #ifndef _NF_CONNTRACK_ICMPV6_H #define _NF_CONNTRACK_ICMPV6_H -#include <asm/atomic.h> #ifndef ICMPV6_NI_QUERY #define ICMPV6_NI_QUERY 139 @@ -18,10 +17,4 @@ #define ICMPV6_NI_REPLY 140 #endif -struct nf_ct_icmpv6 -{ - /* Optimization: when number in == number out, forget immediately. */ - atomic_t count; -}; - #endif /* _NF_CONNTRACK_ICMPV6_H */ diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 6c3f964de9e..a632689b61b 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -23,7 +23,6 @@ #include <linux/netfilter/nf_conntrack_dccp.h> #include <linux/netfilter/nf_conntrack_sctp.h> #include <linux/netfilter/nf_conntrack_proto_gre.h> -#include <net/netfilter/ipv4/nf_conntrack_icmp.h> #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h> #include <net/netfilter/nf_conntrack_tuple.h> @@ -34,8 +33,6 @@ union nf_conntrack_proto { struct nf_ct_dccp dccp; struct ip_ct_sctp sctp; struct ip_ct_tcp tcp; - struct ip_ct_icmp icmp; - struct nf_ct_icmpv6 icmpv6; struct nf_ct_gre gre; }; @@ -96,6 +93,8 @@ struct nf_conn { plus 1 for any connection(s) we are `master' for */ struct nf_conntrack ct_general; + spinlock_t lock; + /* XXX should I move this to the tail ? - Y.K */ /* These are my tuples; original and reply */ struct nf_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX]; @@ -144,6 +143,8 @@ static inline u_int8_t nf_ct_protonum(const struct nf_conn *ct) return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum; } +#define nf_ct_tuple(ct, dir) (&(ct)->tuplehash[dir].tuple) + /* get master conntrack via master expectation */ #define master_ct(conntr) (conntr->master) @@ -200,8 +201,10 @@ extern struct nf_conntrack_tuple_hash * __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple); extern void nf_conntrack_hash_insert(struct nf_conn *ct); +extern void nf_ct_delete_from_lists(struct nf_conn *ct); +extern void nf_ct_insert_dying_list(struct nf_conn *ct); -extern void nf_conntrack_flush(struct net *net, u32 pid, int report); +extern void nf_conntrack_flush_report(struct net *net, u32 pid, int report); extern bool nf_ct_get_tuplepr(const struct sk_buff *skb, unsigned int nhoff, u_int16_t l3num, diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 0ff0dc69ca4..4f20d58e2ab 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -6,17 +6,54 @@ #define _NF_CONNTRACK_ECACHE_H #include <net/netfilter/nf_conntrack.h> -#include <linux/notifier.h> -#include <linux/interrupt.h> #include <net/net_namespace.h> #include <net/netfilter/nf_conntrack_expect.h> +#include <linux/netfilter/nf_conntrack_common.h> +#include <linux/netfilter/nf_conntrack_tuple_common.h> +#include <net/netfilter/nf_conntrack_extend.h> + +/* Connection tracking event types */ +enum ip_conntrack_events +{ + IPCT_NEW = 0, /* new conntrack */ + IPCT_RELATED = 1, /* related conntrack */ + IPCT_DESTROY = 2, /* destroyed conntrack */ + IPCT_STATUS = 3, /* status has changed */ + IPCT_PROTOINFO = 4, /* protocol information has changed */ + IPCT_HELPER = 5, /* new helper has been set */ + IPCT_MARK = 6, /* new mark has been set */ + IPCT_NATSEQADJ = 7, /* NAT is doing sequence adjustment */ + IPCT_SECMARK = 8, /* new security mark has been set */ +}; + +enum ip_conntrack_expect_events { + IPEXP_NEW = 0, /* new expectation */ +}; -#ifdef CONFIG_NF_CONNTRACK_EVENTS struct nf_conntrack_ecache { - struct nf_conn *ct; - unsigned int events; + unsigned long cache; /* bitops want long */ + unsigned long missed; /* missed events */ + u32 pid; /* netlink pid of destroyer */ +}; + +static inline struct nf_conntrack_ecache * +nf_ct_ecache_find(const struct nf_conn *ct) +{ + return nf_ct_ext_find(ct, NF_CT_EXT_ECACHE); +} + +static inline struct nf_conntrack_ecache * +nf_ct_ecache_ext_add(struct nf_conn *ct, gfp_t gfp) +{ + struct net *net = nf_ct_net(ct); + + if (!net->ct.sysctl_events) + return NULL; + + return nf_ct_ext_add(ct, NF_CT_EXT_ECACHE, gfp); }; +#ifdef CONFIG_NF_CONNTRACK_EVENTS /* This structure is passed to event handler */ struct nf_ct_event { struct nf_conn *ct; @@ -24,47 +61,96 @@ struct nf_ct_event { int report; }; -extern struct atomic_notifier_head nf_conntrack_chain; -extern int nf_conntrack_register_notifier(struct notifier_block *nb); -extern int nf_conntrack_unregister_notifier(struct notifier_block *nb); +struct nf_ct_event_notifier { + int (*fcn)(unsigned int events, struct nf_ct_event *item); +}; + +extern struct nf_ct_event_notifier *nf_conntrack_event_cb; +extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); -extern void nf_ct_deliver_cached_events(const struct nf_conn *ct); -extern void __nf_ct_event_cache_init(struct nf_conn *ct); -extern void nf_ct_event_cache_flush(struct net *net); +extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct nf_conntrack_ecache *e; + + if (nf_conntrack_event_cb == NULL) + return; + + e = nf_ct_ecache_find(ct); + if (e == NULL) + return; + + set_bit(event, &e->cache); +} + +static inline int +nf_conntrack_eventmask_report(unsigned int eventmask, + struct nf_conn *ct, + u32 pid, + int report) +{ + int ret = 0; struct net *net = nf_ct_net(ct); - struct nf_conntrack_ecache *ecache; - - local_bh_disable(); - ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id()); - if (ct != ecache->ct) - __nf_ct_event_cache_init(ct); - ecache->events |= event; - local_bh_enable(); + struct nf_ct_event_notifier *notify; + struct nf_conntrack_ecache *e; + + rcu_read_lock(); + notify = rcu_dereference(nf_conntrack_event_cb); + if (notify == NULL) + goto out_unlock; + + if (!net->ct.sysctl_events) + goto out_unlock; + + e = nf_ct_ecache_find(ct); + if (e == NULL) + goto out_unlock; + + if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) { + struct nf_ct_event item = { + .ct = ct, + .pid = e->pid ? e->pid : pid, + .report = report + }; + /* This is a resent of a destroy event? If so, skip missed */ + unsigned long missed = e->pid ? 0 : e->missed; + + ret = notify->fcn(eventmask | missed, &item); + if (unlikely(ret < 0 || missed)) { + spin_lock_bh(&ct->lock); + if (ret < 0) { + /* This is a destroy event that has been + * triggered by a process, we store the PID + * to include it in the retransmission. */ + if (eventmask & (1 << IPCT_DESTROY) && + e->pid == 0 && pid != 0) + e->pid = pid; + else + e->missed |= eventmask; + } else + e->missed &= ~missed; + spin_unlock_bh(&ct->lock); + } + } +out_unlock: + rcu_read_unlock(); + return ret; } -static inline void -nf_conntrack_event_report(enum ip_conntrack_events event, - struct nf_conn *ct, - u32 pid, - int report) +static inline int +nf_conntrack_event_report(enum ip_conntrack_events event, struct nf_conn *ct, + u32 pid, int report) { - struct nf_ct_event item = { - .ct = ct, - .pid = pid, - .report = report - }; - if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) - atomic_notifier_call_chain(&nf_conntrack_chain, event, &item); + return nf_conntrack_eventmask_report(1 << event, ct, pid, report); } -static inline void +static inline int nf_conntrack_event(enum ip_conntrack_events event, struct nf_conn *ct) { - nf_conntrack_event_report(event, ct, 0, 0); + return nf_conntrack_eventmask_report(1 << event, ct, 0, 0); } struct nf_exp_event { @@ -73,9 +159,13 @@ struct nf_exp_event { int report; }; -extern struct atomic_notifier_head nf_ct_expect_chain; -extern int nf_ct_expect_register_notifier(struct notifier_block *nb); -extern int nf_ct_expect_unregister_notifier(struct notifier_block *nb); +struct nf_exp_event_notifier { + int (*fcn)(unsigned int events, struct nf_exp_event *item); +}; + +extern struct nf_exp_event_notifier *nf_expect_event_cb; +extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -83,12 +173,27 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { - struct nf_exp_event item = { - .exp = exp, - .pid = pid, - .report = report - }; - atomic_notifier_call_chain(&nf_ct_expect_chain, event, &item); + struct net *net = nf_ct_exp_net(exp); + struct nf_exp_event_notifier *notify; + + rcu_read_lock(); + notify = rcu_dereference(nf_expect_event_cb); + if (notify == NULL) + goto out_unlock; + + if (!net->ct.sysctl_events) + goto out_unlock; + + { + struct nf_exp_event item = { + .exp = exp, + .pid = pid, + .report = report + }; + notify->fcn(1 << event, &item); + } +out_unlock: + rcu_read_unlock(); } static inline void @@ -105,12 +210,16 @@ extern void nf_conntrack_ecache_fini(struct net *net); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) {} -static inline void nf_conntrack_event(enum ip_conntrack_events event, - struct nf_conn *ct) {} -static inline void nf_conntrack_event_report(enum ip_conntrack_events event, - struct nf_conn *ct, - u32 pid, - int report) {} +static inline int nf_conntrack_eventmask_report(unsigned int eventmask, + struct nf_conn *ct, + u32 pid, + int report) { return 0; } +static inline int nf_conntrack_event(enum ip_conntrack_events event, + struct nf_conn *ct) { return 0; } +static inline int nf_conntrack_event_report(enum ip_conntrack_events event, + struct nf_conn *ct, + u32 pid, + int report) { return 0; } static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {} static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event, struct nf_conntrack_expect *exp) {} @@ -118,7 +227,6 @@ static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e, struct nf_conntrack_expect *exp, u32 pid, int report) {} -static inline void nf_ct_event_cache_flush(struct net *net) {} static inline int nf_conntrack_ecache_init(struct net *net) { diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index da8ee52613a..7f8fc5d123c 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -8,12 +8,14 @@ enum nf_ct_ext_id NF_CT_EXT_HELPER, NF_CT_EXT_NAT, NF_CT_EXT_ACCT, + NF_CT_EXT_ECACHE, NF_CT_EXT_NUM, }; #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat #define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter +#define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h index ee2a4b369a0..1b706800092 100644 --- a/include/net/netfilter/nf_conntrack_helper.h +++ b/include/net/netfilter/nf_conntrack_helper.h @@ -50,6 +50,8 @@ extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp); extern int __nf_ct_try_assign_helper(struct nf_conn *ct, gfp_t flags); +extern void nf_ct_helper_destroy(struct nf_conn *ct); + static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct) { return nf_ct_ext_find(ct, NF_CT_EXT_HELPER); diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h index ba32ed7bdab..3767fb41e54 100644 --- a/include/net/netfilter/nf_conntrack_l4proto.h +++ b/include/net/netfilter/nf_conntrack_l4proto.h @@ -59,11 +59,11 @@ struct nf_conntrack_l4proto const struct nf_conntrack_tuple *); /* Print out the private part of the conntrack. */ - int (*print_conntrack)(struct seq_file *s, const struct nf_conn *); + int (*print_conntrack)(struct seq_file *s, struct nf_conn *); /* convert protoinfo to nfnetink attributes */ int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla, - const struct nf_conn *ct); + struct nf_conn *ct); /* Calculate protoinfo nlattr size */ int (*nlattr_size)(void); diff --git a/include/net/netlink.h b/include/net/netlink.h index eddb50289d6..007bdb07dab 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -940,6 +940,15 @@ static inline u64 nla_get_u64(const struct nlattr *nla) } /** + * nla_get_be64 - return payload of __be64 attribute + * @nla: __be64 netlink attribute + */ +static inline __be64 nla_get_be64(const struct nlattr *nla) +{ + return *(__be64 *) nla_data(nla); +} + +/** * nla_get_flag - return payload of flag attribute * @nla: flag netlink attribute */ diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 9dc58402bc0..ba1ba0c5efd 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -14,16 +14,17 @@ struct netns_ct { struct hlist_nulls_head *hash; struct hlist_head *expect_hash; struct hlist_nulls_head unconfirmed; + struct hlist_nulls_head dying; struct ip_conntrack_stat *stat; -#ifdef CONFIG_NF_CONNTRACK_EVENTS - struct nf_conntrack_ecache *ecache; -#endif + int sysctl_events; + unsigned int sysctl_events_retry_timeout; int sysctl_acct; int sysctl_checksum; unsigned int sysctl_log_invalid; /* Log invalid packets */ #ifdef CONFIG_SYSCTL struct ctl_table_header *sysctl_header; struct ctl_table_header *acct_sysctl_header; + struct ctl_table_header *event_sysctl_header; #endif int hash_vmalloc; int expect_vmalloc; diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index e37fe3129c1..82a3191375f 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -41,16 +41,17 @@ static inline void *qdisc_priv(struct Qdisc *q) typedef u64 psched_time_t; typedef long psched_tdiff_t; -/* Avoid doing 64 bit divide by 1000 */ -#define PSCHED_US2NS(x) ((s64)(x) << 10) -#define PSCHED_NS2US(x) ((x) >> 10) +/* Avoid doing 64 bit divide */ +#define PSCHED_SHIFT 6 +#define PSCHED_TICKS2NS(x) ((s64)(x) << PSCHED_SHIFT) +#define PSCHED_NS2TICKS(x) ((x) >> PSCHED_SHIFT) -#define PSCHED_TICKS_PER_SEC PSCHED_NS2US(NSEC_PER_SEC) +#define PSCHED_TICKS_PER_SEC PSCHED_NS2TICKS(NSEC_PER_SEC) #define PSCHED_PASTPERFECT 0 static inline psched_time_t psched_get_time(void) { - return PSCHED_NS2US(ktime_to_ns(ktime_get())); + return PSCHED_NS2TICKS(ktime_to_ns(ktime_get())); } static inline psched_tdiff_t diff --git a/include/net/regulatory.h b/include/net/regulatory.h new file mode 100644 index 00000000000..47995b81c5d --- /dev/null +++ b/include/net/regulatory.h @@ -0,0 +1,101 @@ +#ifndef __NET_REGULATORY_H +#define __NET_REGULATORY_H +/* + * regulatory support structures + * + * Copyright 2008-2009 Luis R. Rodriguez <lrodriguez@atheros.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/** + * enum environment_cap - Environment parsed from country IE + * @ENVIRON_ANY: indicates country IE applies to both indoor and + * outdoor operation. + * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation + * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation + */ +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + +/** + * struct regulatory_request - used to keep track of regulatory requests + * + * @wiphy_idx: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter + * @list: used to insert into the reg_requests_list linked list + */ +struct regulatory_request { + int wiphy_idx; + enum nl80211_reg_initiator initiator; + char alpha2[2]; + bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; + struct list_head list; +}; + +struct ieee80211_freq_range { + u32 start_freq_khz; + u32 end_freq_khz; + u32 max_bandwidth_khz; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) ((freq) * 1000) +#define KHZ_TO_MHZ(freq) ((freq) / 1000) +#define DBI_TO_MBI(gain) ((gain) * 100) +#define MBI_TO_DBI(gain) ((gain) / 100) +#define DBM_TO_MBM(gain) ((gain) * 100) +#define MBM_TO_DBM(gain) ((gain) / 100) + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ +{ \ + .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ + .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ + .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ + .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\ + .power_rule.max_eirp = DBM_TO_MBM(eirp), \ + .flags = reg_flags, \ +} + +#endif diff --git a/include/net/route.h b/include/net/route.h index 4e8cae0e584..40f6346ef49 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -210,7 +210,7 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt) static inline int inet_iif(const struct sk_buff *skb) { - return skb->rtable->rt_iif; + return skb_rtable(skb)->rt_iif; } #endif /* _ROUTE_H */ diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 23f08fe1d50..edfcacf3250 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1939,10 +1939,8 @@ void sctp_association_free(struct sctp_association *); void sctp_association_put(struct sctp_association *); void sctp_association_hold(struct sctp_association *); -struct sctp_transport *sctp_assoc_choose_init_transport( - struct sctp_association *); -struct sctp_transport *sctp_assoc_choose_shutdown_transport( - struct sctp_association *); +struct sctp_transport *sctp_assoc_choose_alter_transport( + struct sctp_association *, struct sctp_transport *); void sctp_assoc_update_retran_path(struct sctp_association *); struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *, const union sctp_addr *); diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index b259fc5798f..1580c04f68b 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -147,6 +147,8 @@ enum sctp_optname { #define SCTP_GET_LOCAL_ADDRS SCTP_GET_LOCAL_ADDRS SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ #define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX + SCTP_SOCKOPT_CONNECTX3, /* CONNECTX requests. (new implementation) */ +#define SCTP_SOCKOPT_CONNECTX3 SCTP_SOCKOPT_CONNECTX3 }; /* diff --git a/include/net/snmp.h b/include/net/snmp.h index 57c93628695..8c842e06bec 100644 --- a/include/net/snmp.h +++ b/include/net/snmp.h @@ -153,6 +153,11 @@ struct linux_xfrm_mib { per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field]--; \ put_cpu(); \ } while (0) +#define SNMP_ADD_STATS(mib, field, addend) \ + do { \ + per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field] += addend; \ + put_cpu(); \ + } while (0) #define SNMP_ADD_STATS_BH(mib, field, addend) \ (per_cpu_ptr(mib[0], raw_smp_processor_id())->mibs[field] += addend) #define SNMP_ADD_STATS_USER(mib, field, addend) \ @@ -160,5 +165,17 @@ struct linux_xfrm_mib { per_cpu_ptr(mib[1], get_cpu())->mibs[field] += addend; \ put_cpu(); \ } while (0) - +#define SNMP_UPD_PO_STATS(mib, basefield, addend) \ + do { \ + __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], get_cpu());\ + ptr->mibs[basefield##PKTS]++; \ + ptr->mibs[basefield##OCTETS] += addend;\ + put_cpu(); \ + } while (0) +#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend) \ + do { \ + __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], raw_smp_processor_id());\ + ptr->mibs[basefield##PKTS]++; \ + ptr->mibs[basefield##OCTETS] += addend;\ + } while (0) #endif diff --git a/include/net/sock.h b/include/net/sock.h index 4bb1ff9fd15..010e14a93c9 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1217,9 +1217,13 @@ static inline int skb_copy_to_page(struct sock *sk, char __user *from, static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk) { - sock_hold(sk); skb->sk = sk; skb->destructor = sock_wfree; + /* + * We used to take a refcount on sk, but following operation + * is enough to guarantee sk_free() wont free this sock until + * all in-flight packets are completed + */ atomic_add(skb->truesize, &sk->sk_wmem_alloc); } diff --git a/include/net/tcp.h b/include/net/tcp.h index 646dbe3962e..19f4150f4d4 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -266,6 +266,19 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num) atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2]); } +/* syncookies: remember time of last synqueue overflow */ +static inline void tcp_synq_overflow(struct sock *sk) +{ + tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies; +} + +/* syncookies: no recent synqueue overflow on this listening socket? */ +static inline int tcp_synq_no_recent_overflow(const struct sock *sk) +{ + unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp; + return time_after(jiffies, last_overflow + TCP_TIMEOUT_INIT); +} + extern struct proto tcp_prot; #define TCP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.tcp_statistics, field) @@ -889,30 +902,32 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) { struct tcp_sock *tp = tcp_sk(sk); - if (!sysctl_tcp_low_latency && tp->ucopy.task) { - __skb_queue_tail(&tp->ucopy.prequeue, skb); - tp->ucopy.memory += skb->truesize; - if (tp->ucopy.memory > sk->sk_rcvbuf) { - struct sk_buff *skb1; - - BUG_ON(sock_owned_by_user(sk)); - - while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) { - sk_backlog_rcv(sk, skb1); - NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED); - } - - tp->ucopy.memory = 0; - } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) { - wake_up_interruptible(sk->sk_sleep); - if (!inet_csk_ack_scheduled(sk)) - inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * tcp_rto_min(sk)) / 4, - TCP_RTO_MAX); + if (sysctl_tcp_low_latency || !tp->ucopy.task) + return 0; + + __skb_queue_tail(&tp->ucopy.prequeue, skb); + tp->ucopy.memory += skb->truesize; + if (tp->ucopy.memory > sk->sk_rcvbuf) { + struct sk_buff *skb1; + + BUG_ON(sock_owned_by_user(sk)); + + while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) { + sk_backlog_rcv(sk, skb1); + NET_INC_STATS_BH(sock_net(sk), + LINUX_MIB_TCPPREQUEUEDROPPED); } - return 1; + + tp->ucopy.memory = 0; + } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) { + wake_up_interruptible_poll(sk->sk_sleep, + POLLIN | POLLRDNORM | POLLRDBAND); + if (!inet_csk_ack_scheduled(sk)) + inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, + (3 * tcp_rto_min(sk)) / 4, + TCP_RTO_MAX); } - return 0; + return 1; } diff --git a/include/net/wimax.h b/include/net/wimax.h index 6b3824edb39..2af7bf839f2 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -253,7 +253,6 @@ struct net_device; struct genl_info; struct wimax_dev; -struct input_dev; /** * struct wimax_dev - Generic WiMAX device @@ -293,8 +292,8 @@ struct input_dev; * See wimax_reset()'s documentation. * * @name: [fill] A way to identify this device. We need to register a - * name with many subsystems (input for RFKILL, workqueue - * creation, etc). We can't use the network device name as that + * name with many subsystems (rfkill, workqueue creation, etc). + * We can't use the network device name as that * might change and in some instances we don't know it yet (until * we don't call register_netdev()). So we generate an unique one * using the driver name and device bus id, place it here and use @@ -316,9 +315,6 @@ struct input_dev; * * @rfkill: [private] integration into the RF-Kill infrastructure. * - * @rfkill_input: [private] virtual input device to process the - * hardware RF Kill switches. - * * @rf_sw: [private] State of the software radio switch (OFF/ON) * * @rf_hw: [private] State of the hardware radio switch (OFF/ON) diff --git a/include/net/wireless.h b/include/net/wireless.h deleted file mode 100644 index 64a76208580..00000000000 --- a/include/net/wireless.h +++ /dev/null @@ -1,472 +0,0 @@ -#ifndef __NET_WIRELESS_H -#define __NET_WIRELESS_H - -/* - * 802.11 device management - * - * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> - */ - -#include <linux/netdevice.h> -#include <linux/debugfs.h> -#include <linux/list.h> -#include <linux/ieee80211.h> -#include <net/cfg80211.h> - -/** - * enum ieee80211_band - supported frequency bands - * - * The bands are assigned this way because the supported - * bitrates differ in these bands. - * - * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band - * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) - */ -enum ieee80211_band { - IEEE80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ, - - /* keep last */ - IEEE80211_NUM_BANDS -}; - -/** - * enum ieee80211_channel_flags - channel flags - * - * Channel flags set by the regulatory control code. - * - * @IEEE80211_CHAN_DISABLED: This channel is disabled. - * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted - * on this channel. - * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. - * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. - * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel - * is not permitted. - * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel - * is not permitted. - */ -enum ieee80211_channel_flags { - IEEE80211_CHAN_DISABLED = 1<<0, - IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - IEEE80211_CHAN_NO_IBSS = 1<<2, - IEEE80211_CHAN_RADAR = 1<<3, - IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, - IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, -}; - -/** - * struct ieee80211_channel - channel definition - * - * This structure describes a single channel for use - * with cfg80211. - * - * @center_freq: center frequency in MHz - * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz - * @hw_value: hardware-specific value for the channel - * @flags: channel flags from &enum ieee80211_channel_flags. - * @orig_flags: channel flags at registration time, used by regulatory - * code to support devices with additional restrictions - * @band: band this channel belongs to. - * @max_antenna_gain: maximum antenna gain in dBi - * @max_power: maximum transmission power (in dBm) - * @beacon_found: helper to regulatory code to indicate when a beacon - * has been found on this channel. Use regulatory_hint_found_beacon() - * to enable this, this is is useful only on 5 GHz band. - * @orig_mag: internal use - * @orig_mpwr: internal use - */ -struct ieee80211_channel { - enum ieee80211_band band; - u16 center_freq; - u8 max_bandwidth; - u16 hw_value; - u32 flags; - int max_antenna_gain; - int max_power; - bool beacon_found; - u32 orig_flags; - int orig_mag, orig_mpwr; -}; - -/** - * enum ieee80211_rate_flags - rate flags - * - * Hardware/specification flags for rates. These are structured - * in a way that allows using the same bitrate structure for - * different bands/PHY modes. - * - * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short - * preamble on this bitrate; only relevant in 2.4GHz band and - * with CCK rates. - * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate - * when used with 802.11a (on the 5 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate - * when used with 802.11b (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate - * when used with 802.11g (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. - */ -enum ieee80211_rate_flags { - IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, - IEEE80211_RATE_MANDATORY_A = 1<<1, - IEEE80211_RATE_MANDATORY_B = 1<<2, - IEEE80211_RATE_MANDATORY_G = 1<<3, - IEEE80211_RATE_ERP_G = 1<<4, -}; - -/** - * struct ieee80211_rate - bitrate definition - * - * This structure describes a bitrate that an 802.11 PHY can - * operate with. The two values @hw_value and @hw_value_short - * are only for driver use when pointers to this structure are - * passed around. - * - * @flags: rate-specific flags - * @bitrate: bitrate in units of 100 Kbps - * @hw_value: driver/hardware value for this rate - * @hw_value_short: driver/hardware value for this rate when - * short preamble is used - */ -struct ieee80211_rate { - u32 flags; - u16 bitrate; - u16 hw_value, hw_value_short; -}; - -/** - * struct ieee80211_sta_ht_cap - STA's HT capabilities - * - * This structure describes most essential parameters needed - * to describe 802.11n HT capabilities for an STA. - * - * @ht_supported: is HT supported by the STA - * @cap: HT capabilities map as described in 802.11n spec - * @ampdu_factor: Maximum A-MPDU length factor - * @ampdu_density: Minimum A-MPDU spacing - * @mcs: Supported MCS rates - */ -struct ieee80211_sta_ht_cap { - u16 cap; /* use IEEE80211_HT_CAP_ */ - bool ht_supported; - u8 ampdu_factor; - u8 ampdu_density; - struct ieee80211_mcs_info mcs; -}; - -/** - * struct ieee80211_supported_band - frequency band definition - * - * This structure describes a frequency band a wiphy - * is able to operate in. - * - * @channels: Array of channels the hardware can operate in - * in this band. - * @band: the band this structure represents - * @n_channels: Number of channels in @channels - * @bitrates: Array of bitrates the hardware can operate with - * in this band. Must be sorted to give a valid "supported - * rates" IE, i.e. CCK rates first, then OFDM. - * @n_bitrates: Number of bitrates in @bitrates - */ -struct ieee80211_supported_band { - struct ieee80211_channel *channels; - struct ieee80211_rate *bitrates; - enum ieee80211_band band; - int n_channels; - int n_bitrates; - struct ieee80211_sta_ht_cap ht_cap; -}; - -/** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> - * @custom_regulatory: tells us the driver for this device - * has its own custom regulatory domain and cannot identify the - * ISO / IEC 3166 alpha2 it belongs to. When this is enabled - * we will disregard the first regulatory hint (when the - * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @reg_notifier: the driver's regulatory notification callback - * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver - * on the reg_notifier() if it chooses to ignore future - * regulatory domain changes caused by other drivers. - * @signal_type: signal type reported in &struct cfg80211_bss. - */ -struct wiphy { - /* assign these fields before you register the wiphy */ - - /* permanent MAC address */ - u8 perm_addr[ETH_ALEN]; - - /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ - u16 interface_modes; - - bool custom_regulatory; - bool strict_regulatory; - - enum cfg80211_signal_type signal_type; - - int bss_priv_size; - u8 max_scan_ssids; - - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ - void *privid; - - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; - - /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); - - /* fields below are read-only, assigned by cfg80211 */ - - const struct ieee80211_regdomain *regd; - - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ - struct device dev; - - /* dir in debugfs: ieee80211/<wiphyname> */ - struct dentry *debugfsdir; - - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); -}; - -/** struct wireless_dev - wireless per-netdev state - * - * This structure must be allocated by the driver/stack - * that uses the ieee80211_ptr field in struct net_device - * (this is intentional so it can be allocated along with - * the netdev.) - * - * @wiphy: pointer to hardware description - * @iftype: interface type - */ -struct wireless_dev { - struct wiphy *wiphy; - enum nl80211_iftype iftype; - - /* private to the generic wireless code */ - struct list_head list; - struct net_device *netdev; -}; - -/** - * wiphy_priv - return priv from wiphy - */ -static inline void *wiphy_priv(struct wiphy *wiphy) -{ - BUG_ON(!wiphy); - return &wiphy->priv; -} - -/** - * set_wiphy_dev - set device pointer for wiphy - */ -static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) -{ - wiphy->dev.parent = dev; -} - -/** - * wiphy_dev - get wiphy dev pointer - */ -static inline struct device *wiphy_dev(struct wiphy *wiphy) -{ - return wiphy->dev.parent; -} - -/** - * wiphy_name - get wiphy name - */ -static inline const char *wiphy_name(struct wiphy *wiphy) -{ - return dev_name(&wiphy->dev); -} - -/** - * wdev_priv - return wiphy priv from wireless_dev - */ -static inline void *wdev_priv(struct wireless_dev *wdev) -{ - BUG_ON(!wdev); - return wiphy_priv(wdev->wiphy); -} - -/** - * wiphy_new - create a new wiphy for use with cfg80211 - * - * create a new wiphy and associate the given operations with it. - * @sizeof_priv bytes are allocated for private use. - * - * the returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. - */ -struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv); - -/** - * wiphy_register - register a wiphy with cfg80211 - * - * register the given wiphy - * - * Returns a non-negative wiphy index or a negative error code. - */ -extern int wiphy_register(struct wiphy *wiphy); - -/** - * wiphy_unregister - deregister a wiphy from cfg80211 - * - * unregister a device with the given priv pointer. - * After this call, no more requests can be made with this priv - * pointer, but the call may sleep to wait for an outstanding - * request that is being handled. - */ -extern void wiphy_unregister(struct wiphy *wiphy); - -/** - * wiphy_free - free wiphy - */ -extern void wiphy_free(struct wiphy *wiphy); - -/** - * ieee80211_channel_to_frequency - convert channel number to frequency - */ -extern int ieee80211_channel_to_frequency(int chan); - -/** - * ieee80211_frequency_to_channel - convert frequency to channel number - */ -extern int ieee80211_frequency_to_channel(int freq); - -/* - * Name indirection necessary because the ieee80211 code also has - * a function named "ieee80211_get_channel", so if you include - * cfg80211's header file you get cfg80211's version, if you try - * to include both header files you'll (rightfully!) get a symbol - * clash. - */ -extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, - int freq); -/** - * ieee80211_get_channel - get channel struct from wiphy for specified frequency - */ -static inline struct ieee80211_channel * -ieee80211_get_channel(struct wiphy *wiphy, int freq) -{ - return __ieee80211_get_channel(wiphy, freq); -} - -/** - * ieee80211_get_response_rate - get basic rate for a given rate - * - * @sband: the band to look for rates in - * @basic_rates: bitmap of basic rates - * @bitrate: the bitrate for which to find the basic rate - * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. - */ -struct ieee80211_rate * -ieee80211_get_response_rate(struct ieee80211_supported_band *sband, - u32 basic_rates, int bitrate); - -/** - * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. - * - * Wireless drivers can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. - * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. - * - * The wiphy must have been registered to cfg80211 prior to this call. - * For cfg80211 drivers this means you must first use wiphy_register(), - * for mac80211 drivers you must first use ieee80211_register_hw(). - * - * Drivers should check the return value, its possible you can get - * an -ENOMEM. - */ -extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); - -/** - * regulatory_hint_11d - hints a country IE as a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @country_ie: pointer to the country IE - * @country_ie_len: length of the country IE - * - * We will intersect the rd with the what CRDA tells us should apply - * for the alpha2 this country IE belongs to, this prevents APs from - * sending us incorrect or outdated information against a country. - */ -extern void regulatory_hint_11d(struct wiphy *wiphy, - u8 *country_ie, - u8 country_ie_len); -/** - * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain - * @wiphy: the wireless device we want to process the regulatory domain on - * @regd: the custom regulatory domain to use for this wiphy - * - * Drivers can sometimes have custom regulatory domains which do not apply - * to a specific country. Drivers can use this to apply such custom regulatory - * domains. This routine must be called prior to wiphy registration. The - * custom regulatory domain will be trusted completely and as such previous - * default channel settings will be disregarded. If no rule is found for a - * channel on the regulatory domain the channel will be disabled. - */ -extern void wiphy_apply_custom_regulatory( - struct wiphy *wiphy, - const struct ieee80211_regdomain *regd); - -/** - * freq_reg_info - get regulatory information for the given frequency - * @wiphy: the wiphy for which we want to process this rule for - * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. - * @reg_rule: the regulatory rule which we have for this frequency - * - * Use this function to get the regulatory rule for a specific frequency on - * a given wireless device. If the device has a specific regulatory domain - * it wants to follow we respect that unless a country IE has been received - * and processed already. - * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. - */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule); - -#endif /* __NET_WIRELESS_H */ diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 2e9f5c0018a..736bca45088 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -994,7 +994,7 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir, return __xfrm_policy_check(sk, ndir, skb, family); return (!net->xfrm.policy_count[dir] && !skb->sp) || - (skb->dst->flags & DST_NOPOLICY) || + (skb_dst(skb)->flags & DST_NOPOLICY) || __xfrm_policy_check(sk, ndir, skb, family); } @@ -1048,7 +1048,7 @@ static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family) struct net *net = dev_net(skb->dev); return !net->xfrm.policy_count[XFRM_POLICY_OUT] || - (skb->dst->flags & DST_NOXFRM) || + (skb_dst(skb)->flags & DST_NOXFRM) || __xfrm_route_forward(skb, family); } |