diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/cfg80211.h | 184 | ||||
| -rw-r--r-- | include/net/mac80211.h | 7 | ||||
| -rw-r--r-- | include/net/nfc.h | 7 | ||||
| -rw-r--r-- | include/net/regulatory.h | 16 |
4 files changed, 179 insertions, 35 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ab124407592..09024ab617f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -334,6 +334,36 @@ struct survey_info { }; /** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; +}; + +/** * struct beacon_parameters - beacon parameters * * Used to configure the beacon for an interface. @@ -346,11 +376,38 @@ struct survey_info { * @dtim_period: DTIM period or zero if not changed * @head_len: length of @head * @tail_len: length of @tail + * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from + * user space) + * @ssid_len: length of @ssid + * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) + * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL + * @beacon_ies_len: length of beacon_ies in octets + * @proberesp_ies: extra information element(s) to add into Probe Response + * frames or %NULL + * @proberesp_ies_len: length of proberesp_ies in octets + * @assocresp_ies: extra information element(s) to add into (Re)Association + * Response frames or %NULL + * @assocresp_ies_len: length of assocresp_ies in octets */ struct beacon_parameters { u8 *head, *tail; int interval, dtim_period; int head_len, tail_len; + const u8 *ssid; + size_t ssid_len; + enum nl80211_hidden_ssid hidden_ssid; + struct cfg80211_crypto_settings crypto; + bool privacy; + enum nl80211_auth_type auth_type; + const u8 *beacon_ies; + size_t beacon_ies_len; + const u8 *proberesp_ies; + size_t proberesp_ies_len; + const u8 *assocresp_ies; + size_t assocresp_ies_len; }; /** @@ -395,6 +452,8 @@ struct station_parameters { u8 plink_action; u8 plink_state; struct ieee80211_ht_cap *ht_capa; + u8 uapsd_queues; + u8 max_sp; }; /** @@ -698,6 +757,12 @@ struct mesh_config { u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; u8 dot11MeshHWMPRootMode; + u16 dot11MeshHWMPRannInterval; + /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol + * set to true only means that the station will announce others it's a + * mesh gate, but not necessarily using the gate announcement protocol. + * Still keeping the same nomenclature to be in sync with the spec. */ + bool dot11MeshGateAnnouncementProtocol; }; /** @@ -811,6 +876,15 @@ struct cfg80211_scan_request { }; /** + * struct cfg80211_match_set - sets of attributes to match + * + * @ssid: SSID to be matched + */ +struct cfg80211_match_set { + struct cfg80211_ssid ssid; +}; + +/** * struct cfg80211_sched_scan_request - scheduled scan request description * * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) @@ -819,6 +893,11 @@ struct cfg80211_scan_request { * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @match_sets: sets of parameters to be matched for a scan result + * entry to be considered valid and to be passed to the host + * (others are filtered out). + * If ommited, all results are passed. + * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface * @channels: channels to scan @@ -830,6 +909,8 @@ struct cfg80211_sched_scan_request { u32 interval; const u8 *ie; size_t ie_len; + struct cfg80211_match_set *match_sets; + int n_match_sets; /* internal */ struct wiphy *wiphy; @@ -906,36 +987,6 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); /** - * struct cfg80211_crypto_settings - Crypto settings - * @wpa_versions: indicates which, if any, WPA versions are enabled - * (from enum nl80211_wpa_versions) - * @cipher_group: group key cipher suite (or 0 if unset) - * @n_ciphers_pairwise: number of AP supported unicast ciphers - * @ciphers_pairwise: unicast key cipher suites - * @n_akm_suites: number of AKM suites - * @akm_suites: AKM suites - * @control_port: Whether user space controls IEEE 802.1X port, i.e., - * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is - * required to assume that the port is unauthorized until authorized by - * user space. Otherwise, port is marked authorized by default. - * @control_port_ethertype: the control port protocol that should be - * allowed through even on unauthorized ports - * @control_port_no_encrypt: TRUE to prevent encryption of control port - * protocol frames. - */ -struct cfg80211_crypto_settings { - u32 wpa_versions; - u32 cipher_group; - int n_ciphers_pairwise; - u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; - int n_akm_suites; - u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; - bool control_port; - __be16 control_port_ethertype; - bool control_port_no_encrypt; -}; - -/** * struct cfg80211_auth_request - Authentication request data * * This structure provides information needed to complete IEEE 802.11 @@ -1584,6 +1635,9 @@ struct cfg80211_ops { * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. + * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the + * firmware. + * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1598,6 +1652,8 @@ enum wiphy_flags { WIPHY_FLAG_MESH_AUTH = BIT(10), WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), + WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), + WIPHY_FLAG_AP_UAPSD = BIT(14), }; /** @@ -1757,6 +1813,7 @@ struct wiphy_wowlan_support { * @debugfsdir: debugfs directory used for this wiphy, will be renamed * automatically on wiphy renames * @dev: (virtual) struct device for this wiphy + * @registered: helps synchronize suspend/resume with wiphy unregister * @wext: wireless extension handlers * @priv: driver private data (sized according to wiphy_new() parameter) * @interface_modes: bitmask of interfaces types valid for this wiphy, @@ -1773,6 +1830,9 @@ struct wiphy_wowlan_support { * any given scan * @max_sched_scan_ssids: maximum number of SSIDs the device can scan * for in any given scheduled scan + * @max_match_sets: maximum number of match sets the device can handle + * when performing a scheduled scan, 0 if filtering is not + * supported. * @max_scan_ie_len: maximum length of user-controlled IEs device can * add to probe request frames transmitted during a scan, must not * include fixed IEs like supported rates @@ -1830,6 +1890,7 @@ struct wiphy { int bss_priv_size; u8 max_scan_ssids; u8 max_sched_scan_ssids; + u8 max_match_sets; u16 max_scan_ie_len; u16 max_sched_scan_ie_len; @@ -2240,6 +2301,69 @@ extern int ieee80211_radiotap_iterator_next( extern const unsigned char rfc1042_header[6]; extern const unsigned char bridge_tunnel_header[6]; +/* Parsed Information Elements */ +struct ieee802_11_elems { + u8 *ie_start; + size_t total_len; + + /* pointers to IEs */ + u8 *ssid; + u8 *supp_rates; + u8 *fh_params; + u8 *ds_params; + u8 *cf_params; + struct ieee80211_tim_ie *tim; + u8 *ibss_params; + u8 *challenge; + u8 *wpa; + u8 *rsn; + u8 *erp_info; + u8 *ext_supp_rates; + u8 *wmm_info; + u8 *wmm_param; + struct ieee80211_ht_cap *ht_cap_elem; + struct ieee80211_ht_info *ht_info_elem; + struct ieee80211_meshconf_ie *mesh_config; + u8 *mesh_id; + u8 *peering; + u8 *preq; + u8 *prep; + u8 *perr; + struct ieee80211_rann_ie *rann; + u8 *ch_switch_elem; + u8 *country_elem; + u8 *pwr_constr_elem; + u8 *quiet_elem; /* first quite element */ + u8 *timeout_int; + + /* length of them, respectively */ + u8 ssid_len; + u8 supp_rates_len; + u8 fh_params_len; + u8 ds_params_len; + u8 cf_params_len; + u8 tim_len; + u8 ibss_params_len; + u8 challenge_len; + u8 wpa_len; + u8 rsn_len; + u8 erp_info_len; + u8 ext_supp_rates_len; + u8 wmm_info_len; + u8 wmm_param_len; + u8 mesh_id_len; + u8 peering_len; + u8 preq_len; + u8 prep_len; + u8 perr_len; + u8 ch_switch_elem_len; + u8 country_elem_len; + u8 pwr_constr_elem_len; + u8 quiet_elem_len; + u8 num_of_quiet_elem; /* can be more the one */ + u8 timeout_int_len; +}; + /** * ieee80211_get_hdrlen_from_skb - get header length from data * diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2f01d84ca52..5e5029b22ac 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -954,6 +954,8 @@ struct ieee80211_sta { u16 aid; struct ieee80211_sta_ht_cap ht_cap; bool wme; + u8 uapsd_queues; + u8 max_sp; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); @@ -1094,6 +1096,10 @@ enum sta_notify_cmd { * stations based on the PM bit of incoming frames. * Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure * the PS mode of connected stations. + * + * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session + * setup strictly in HW. mac80211 should not attempt to do this in + * software. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1119,6 +1125,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, + IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, }; /** diff --git a/include/net/nfc.h b/include/net/nfc.h index cc0130312f7..87b51fe15b7 100644 --- a/include/net/nfc.h +++ b/include/net/nfc.h @@ -82,6 +82,9 @@ struct nfc_dev { struct nfc_genl_data genl_data; u32 supported_protocols; + int tx_headroom; + int tx_tailroom; + struct nfc_ops *ops; }; #define to_nfc_dev(_dev) container_of(_dev, struct nfc_dev, dev) @@ -89,7 +92,9 @@ struct nfc_dev { extern struct class nfc_class; struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, - u32 supported_protocols); + u32 supported_protocols, + int tx_headroom, + int tx_tailroom); /** * nfc_free_device - free nfc device diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 356d6e3dc20..eb7d3c2d427 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -3,11 +3,19 @@ /* * regulatory support structures * - * Copyright 2008-2009 Luis R. Rodriguez <lrodriguez@atheros.com> + * Copyright 2008-2009 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ |