diff options
Diffstat (limited to 'include/scsi/sas.h')
| -rw-r--r-- | include/scsi/sas.h | 631 |
1 files changed, 631 insertions, 0 deletions
diff --git a/include/scsi/sas.h b/include/scsi/sas.h new file mode 100644 index 00000000000..2f4b6afa34f --- /dev/null +++ b/include/scsi/sas.h @@ -0,0 +1,631 @@ +/* + * SAS structures and definitions header file + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#ifndef _SAS_H_ +#define _SAS_H_ + +#include <linux/types.h> +#include <asm/byteorder.h> + +#define SAS_ADDR_SIZE 8 +#define HASHED_SAS_ADDR_SIZE 3 +#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa))) + +#define SMP_REQUEST 0x40 +#define SMP_RESPONSE 0x41 + +#define SSP_DATA 0x01 +#define SSP_XFER_RDY 0x05 +#define SSP_COMMAND 0x06 +#define SSP_RESPONSE 0x07 +#define SSP_TASK 0x16 + +#define SMP_REPORT_GENERAL 0x00 +#define SMP_REPORT_MANUF_INFO 0x01 +#define SMP_READ_GPIO_REG 0x02 +#define SMP_DISCOVER 0x10 +#define SMP_REPORT_PHY_ERR_LOG 0x11 +#define SMP_REPORT_PHY_SATA 0x12 +#define SMP_REPORT_ROUTE_INFO 0x13 +#define SMP_WRITE_GPIO_REG 0x82 +#define SMP_CONF_ROUTE_INFO 0x90 +#define SMP_PHY_CONTROL 0x91 +#define SMP_PHY_TEST_FUNCTION 0x92 + +#define SMP_RESP_FUNC_ACC 0x00 +#define SMP_RESP_FUNC_UNK 0x01 +#define SMP_RESP_FUNC_FAILED 0x02 +#define SMP_RESP_INV_FRM_LEN 0x03 +#define SMP_RESP_NO_PHY 0x10 +#define SMP_RESP_NO_INDEX 0x11 +#define SMP_RESP_PHY_NO_SATA 0x12 +#define SMP_RESP_PHY_UNK_OP 0x13 +#define SMP_RESP_PHY_UNK_TESTF 0x14 +#define SMP_RESP_PHY_TEST_INPROG 0x15 +#define SMP_RESP_PHY_VACANT 0x16 + +/* SAM TMFs */ +#define TMF_ABORT_TASK 0x01 +#define TMF_ABORT_TASK_SET 0x02 +#define TMF_CLEAR_TASK_SET 0x04 +#define TMF_LU_RESET 0x08 +#define TMF_CLEAR_ACA 0x40 +#define TMF_QUERY_TASK 0x80 + +/* SAS TMF responses */ +#define TMF_RESP_FUNC_COMPLETE 0x00 +#define TMF_RESP_INVALID_FRAME 0x02 +#define TMF_RESP_FUNC_ESUPP 0x04 +#define TMF_RESP_FUNC_FAILED 0x05 +#define TMF_RESP_FUNC_SUCC 0x08 +#define TMF_RESP_NO_LUN 0x09 +#define TMF_RESP_OVERLAPPED_TAG 0x0A + +enum sas_oob_mode { + OOB_NOT_CONNECTED, + SATA_OOB_MODE, + SAS_OOB_MODE +}; + +/* See sas_discover.c if you plan on changing these. + */ +enum sas_dev_type { + NO_DEVICE = 0, /* protocol */ + SAS_END_DEV = 1, /* protocol */ + EDGE_DEV = 2, /* protocol */ + FANOUT_DEV = 3, /* protocol */ + SAS_HA = 4, + SATA_DEV = 5, + SATA_PM = 7, + SATA_PM_PORT= 8, +}; + +/* Partly from IDENTIFY address frame. */ +enum sas_proto { + SATA_PROTO = 1, + SAS_PROTO_SMP = 2, /* protocol */ + SAS_PROTO_STP = 4, /* protocol */ + SAS_PROTO_SSP = 8, /* protocol */ + SAS_PROTO_ALL = 0xE, +}; + +/* From the spec; local phys only */ +enum phy_func { + PHY_FUNC_NOP, + PHY_FUNC_LINK_RESET, /* Enables the phy */ + PHY_FUNC_HARD_RESET, + PHY_FUNC_DISABLE, + PHY_FUNC_CLEAR_ERROR_LOG = 5, + PHY_FUNC_CLEAR_AFFIL, + PHY_FUNC_TX_SATA_PS_SIGNAL, + PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */ + PHY_FUNC_SET_LINK_RATE, +}; + +/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST. + * Most of those are here for completeness. + */ +enum sas_prim { + SAS_PRIM_AIP_NORMAL = 1, + SAS_PRIM_AIP_R0 = 2, + SAS_PRIM_AIP_R1 = 3, + SAS_PRIM_AIP_R2 = 4, + SAS_PRIM_AIP_WC = 5, + SAS_PRIM_AIP_WD = 6, + SAS_PRIM_AIP_WP = 7, + SAS_PRIM_AIP_RWP = 8, + + SAS_PRIM_BC_CH = 9, + SAS_PRIM_BC_RCH0 = 10, + SAS_PRIM_BC_RCH1 = 11, + SAS_PRIM_BC_R0 = 12, + SAS_PRIM_BC_R1 = 13, + SAS_PRIM_BC_R2 = 14, + SAS_PRIM_BC_R3 = 15, + SAS_PRIM_BC_R4 = 16, + + SAS_PRIM_NOTIFY_ENSP= 17, + SAS_PRIM_NOTIFY_R0 = 18, + SAS_PRIM_NOTIFY_R1 = 19, + SAS_PRIM_NOTIFY_R2 = 20, + + SAS_PRIM_CLOSE_CLAF = 21, + SAS_PRIM_CLOSE_NORM = 22, + SAS_PRIM_CLOSE_R0 = 23, + SAS_PRIM_CLOSE_R1 = 24, + + SAS_PRIM_OPEN_RTRY = 25, + SAS_PRIM_OPEN_RJCT = 26, + SAS_PRIM_OPEN_ACPT = 27, + + SAS_PRIM_DONE = 28, + SAS_PRIM_BREAK = 29, + + SATA_PRIM_DMAT = 33, + SATA_PRIM_PMNAK = 34, + SATA_PRIM_PMACK = 35, + SATA_PRIM_PMREQ_S = 36, + SATA_PRIM_PMREQ_P = 37, + SATA_SATA_R_ERR = 38, +}; + +enum sas_open_rej_reason { + /* Abandon open */ + SAS_OREJ_UNKNOWN = 0, + SAS_OREJ_BAD_DEST = 1, + SAS_OREJ_CONN_RATE = 2, + SAS_OREJ_EPROTO = 3, + SAS_OREJ_RESV_AB0 = 4, + SAS_OREJ_RESV_AB1 = 5, + SAS_OREJ_RESV_AB2 = 6, + SAS_OREJ_RESV_AB3 = 7, + SAS_OREJ_WRONG_DEST= 8, + SAS_OREJ_STP_NORES = 9, + + /* Retry open */ + SAS_OREJ_NO_DEST = 10, + SAS_OREJ_PATH_BLOCKED = 11, + SAS_OREJ_RSVD_CONT0 = 12, + SAS_OREJ_RSVD_CONT1 = 13, + SAS_OREJ_RSVD_INIT0 = 14, + SAS_OREJ_RSVD_INIT1 = 15, + SAS_OREJ_RSVD_STOP0 = 16, + SAS_OREJ_RSVD_STOP1 = 17, + SAS_OREJ_RSVD_RETRY = 18, +}; + +struct dev_to_host_fis { + u8 fis_type; /* 0x34 */ + u8 flags; + u8 status; + u8 error; + + u8 lbal; + union { u8 lbam; u8 byte_count_low; }; + union { u8 lbah; u8 byte_count_high; }; + u8 device; + + u8 lbal_exp; + u8 lbam_exp; + u8 lbah_exp; + u8 _r_a; + + union { u8 sector_count; u8 interrupt_reason; }; + u8 sector_count_exp; + u8 _r_b; + u8 _r_c; + + u32 _r_d; +} __attribute__ ((packed)); + +struct host_to_dev_fis { + u8 fis_type; /* 0x27 */ + u8 flags; + u8 command; + u8 features; + + u8 lbal; + union { u8 lbam; u8 byte_count_low; }; + union { u8 lbah; u8 byte_count_high; }; + u8 device; + + u8 lbal_exp; + u8 lbam_exp; + u8 lbah_exp; + u8 features_exp; + + union { u8 sector_count; u8 interrupt_reason; }; + u8 sector_count_exp; + u8 _r_a; + u8 control; + + u32 _r_b; +} __attribute__ ((packed)); + +/* Prefer to have code clarity over header file clarity. + */ +#ifdef __LITTLE_ENDIAN_BITFIELD +struct sas_identify_frame { + /* Byte 0 */ + u8 frame_type:4; + u8 dev_type:3; + u8 _un0:1; + + /* Byte 1 */ + u8 _un1; + + /* Byte 2 */ + union { + struct { + u8 _un20:1; + u8 smp_iport:1; + u8 stp_iport:1; + u8 ssp_iport:1; + u8 _un247:4; + }; + u8 initiator_bits; + }; + + /* Byte 3 */ + union { + struct { + u8 _un30:1; + u8 smp_tport:1; + u8 stp_tport:1; + u8 ssp_tport:1; + u8 _un347:4; + }; + u8 target_bits; + }; + + /* Byte 4 - 11 */ + u8 _un4_11[8]; + + /* Byte 12 - 19 */ + u8 sas_addr[SAS_ADDR_SIZE]; + + /* Byte 20 */ + u8 phy_id; + + u8 _un21_27[7]; + + __be32 crc; +} __attribute__ ((packed)); + +struct ssp_frame_hdr { + u8 frame_type; + u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE]; + u8 _r_a; + u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE]; + __be16 _r_b; + + u8 changing_data_ptr:1; + u8 retransmit:1; + u8 retry_data_frames:1; + u8 _r_c:5; + + u8 num_fill_bytes:2; + u8 _r_d:6; + + u32 _r_e; + __be16 tag; + __be16 tptt; + __be32 data_offs; +} __attribute__ ((packed)); + +struct ssp_response_iu { + u8 _r_a[10]; + + u8 datapres:2; + u8 _r_b:6; + + u8 status; + + u32 _r_c; + + __be32 sense_data_len; + __be32 response_data_len; + + u8 resp_data[0]; + u8 sense_data[0]; +} __attribute__ ((packed)); + +/* ---------- SMP ---------- */ + +struct report_general_resp { + __be16 change_count; + __be16 route_indexes; + u8 _r_a; + u8 num_phys; + + u8 conf_route_table:1; + u8 configuring:1; + u8 _r_b:6; + + u8 _r_c; + + u8 enclosure_logical_id[8]; + + u8 _r_d[12]; +} __attribute__ ((packed)); + +struct discover_resp { + u8 _r_a[5]; + + u8 phy_id; + __be16 _r_b; + + u8 _r_c:4; + u8 attached_dev_type:3; + u8 _r_d:1; + + u8 linkrate:4; + u8 _r_e:4; + + u8 attached_sata_host:1; + u8 iproto:3; + u8 _r_f:4; + + u8 attached_sata_dev:1; + u8 tproto:3; + u8 _r_g:3; + u8 attached_sata_ps:1; + + u8 sas_addr[8]; + u8 attached_sas_addr[8]; + u8 attached_phy_id; + + u8 _r_h[7]; + + u8 hmin_linkrate:4; + u8 pmin_linkrate:4; + u8 hmax_linkrate:4; + u8 pmax_linkrate:4; + + u8 change_count; + + u8 pptv:4; + u8 _r_i:3; + u8 virtual:1; + + u8 routing_attr:4; + u8 _r_j:4; + + u8 conn_type; + u8 conn_el_index; + u8 conn_phy_link; + + u8 _r_k[8]; +} __attribute__ ((packed)); + +struct report_phy_sata_resp { + u8 _r_a[5]; + + u8 phy_id; + u8 _r_b; + + u8 affil_valid:1; + u8 affil_supp:1; + u8 _r_c:6; + + u32 _r_d; + + u8 stp_sas_addr[8]; + + struct dev_to_host_fis fis; + + u32 _r_e; + + u8 affil_stp_ini_addr[8]; + + __be32 crc; +} __attribute__ ((packed)); + +struct smp_resp { + u8 frame_type; + u8 function; + u8 result; + u8 reserved; + union { + struct report_general_resp rg; + struct discover_resp disc; + struct report_phy_sata_resp rps; + }; +} __attribute__ ((packed)); + +#elif defined(__BIG_ENDIAN_BITFIELD) +struct sas_identify_frame { + /* Byte 0 */ + u8 _un0:1; + u8 dev_type:3; + u8 frame_type:4; + + /* Byte 1 */ + u8 _un1; + + /* Byte 2 */ + union { + struct { + u8 _un247:4; + u8 ssp_iport:1; + u8 stp_iport:1; + u8 smp_iport:1; + u8 _un20:1; + }; + u8 initiator_bits; + }; + + /* Byte 3 */ + union { + struct { + u8 _un347:4; + u8 ssp_tport:1; + u8 stp_tport:1; + u8 smp_tport:1; + u8 _un30:1; + }; + u8 target_bits; + }; + + /* Byte 4 - 11 */ + u8 _un4_11[8]; + + /* Byte 12 - 19 */ + u8 sas_addr[SAS_ADDR_SIZE]; + + /* Byte 20 */ + u8 phy_id; + + u8 _un21_27[7]; + + __be32 crc; +} __attribute__ ((packed)); + +struct ssp_frame_hdr { + u8 frame_type; + u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE]; + u8 _r_a; + u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE]; + __be16 _r_b; + + u8 _r_c:5; + u8 retry_data_frames:1; + u8 retransmit:1; + u8 changing_data_ptr:1; + + u8 _r_d:6; + u8 num_fill_bytes:2; + + u32 _r_e; + __be16 tag; + __be16 tptt; + __be32 data_offs; +} __attribute__ ((packed)); + +struct ssp_response_iu { + u8 _r_a[10]; + + u8 _r_b:6; + u8 datapres:2; + + u8 status; + + u32 _r_c; + + __be32 sense_data_len; + __be32 response_data_len; + + u8 resp_data[0]; + u8 sense_data[0]; +} __attribute__ ((packed)); + +/* ---------- SMP ---------- */ + +struct report_general_resp { + __be16 change_count; + __be16 route_indexes; + u8 _r_a; + u8 num_phys; + + u8 _r_b:6; + u8 configuring:1; + u8 conf_route_table:1; + + u8 _r_c; + + u8 enclosure_logical_id[8]; + + u8 _r_d[12]; +} __attribute__ ((packed)); + +struct discover_resp { + u8 _r_a[5]; + + u8 phy_id; + __be16 _r_b; + + u8 _r_d:1; + u8 attached_dev_type:3; + u8 _r_c:4; + + u8 _r_e:4; + u8 linkrate:4; + + u8 _r_f:4; + u8 iproto:3; + u8 attached_sata_host:1; + + u8 attached_sata_ps:1; + u8 _r_g:3; + u8 tproto:3; + u8 attached_sata_dev:1; + + u8 sas_addr[8]; + u8 attached_sas_addr[8]; + u8 attached_phy_id; + + u8 _r_h[7]; + + u8 pmin_linkrate:4; + u8 hmin_linkrate:4; + u8 pmax_linkrate:4; + u8 hmax_linkrate:4; + + u8 change_count; + + u8 virtual:1; + u8 _r_i:3; + u8 pptv:4; + + u8 _r_j:4; + u8 routing_attr:4; + + u8 conn_type; + u8 conn_el_index; + u8 conn_phy_link; + + u8 _r_k[8]; +} __attribute__ ((packed)); + +struct report_phy_sata_resp { + u8 _r_a[5]; + + u8 phy_id; + u8 _r_b; + + u8 _r_c:6; + u8 affil_supp:1; + u8 affil_valid:1; + + u32 _r_d; + + u8 stp_sas_addr[8]; + + struct dev_to_host_fis fis; + + u32 _r_e; + + u8 affil_stp_ini_addr[8]; + + __be32 crc; +} __attribute__ ((packed)); + +struct smp_resp { + u8 frame_type; + u8 function; + u8 result; + u8 reserved; + union { + struct report_general_resp rg; + struct discover_resp disc; + struct report_phy_sata_resp rps; + }; +} __attribute__ ((packed)); + +#else +#error "Bitfield order not defined!" +#endif + +#endif /* _SAS_H_ */ |