summaryrefslogtreecommitdiffstats
path: root/include/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'include/scsi')
-rw-r--r--include/scsi/Kbuild4
-rw-r--r--include/scsi/libiscsi.h6
-rw-r--r--include/scsi/libsas.h627
-rw-r--r--include/scsi/sas.h631
-rw-r--r--include/scsi/scsi.h16
-rw-r--r--include/scsi/scsi_cmnd.h14
-rw-r--r--include/scsi/scsi_device.h4
-rw-r--r--include/scsi/scsi_host.h7
-rw-r--r--include/scsi/scsi_netlink.h87
-rw-r--r--include/scsi/scsi_netlink_fc.h71
-rw-r--r--include/scsi/scsi_tcq.h20
-rw-r--r--include/scsi/scsi_transport_fc.h80
-rw-r--r--include/scsi/scsi_transport_sas.h37
-rw-r--r--include/scsi/scsi_transport_spi.h3
14 files changed, 1553 insertions, 54 deletions
diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild
index 14a033d7331..744f85011f1 100644
--- a/include/scsi/Kbuild
+++ b/include/scsi/Kbuild
@@ -1,2 +1,4 @@
header-y += scsi.h
-unifdef-y := scsi_ioctl.h sg.h
+
+unifdef-y += scsi_ioctl.h
+unifdef-y += sg.h
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 41904f611d1..401192e56e5 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -102,6 +102,8 @@ struct iscsi_cmd_task {
uint32_t unsol_datasn;
int imm_count; /* imm-data (bytes) */
int unsol_count; /* unsolicited (bytes)*/
+ /* offset in unsolicited stream (bytes); */
+ int unsol_offset;
int data_count; /* remaining Data-Out */
struct scsi_cmnd *sc; /* associated SCSI cmd*/
int total_length;
@@ -110,6 +112,7 @@ struct iscsi_cmd_task {
/* state set/tested under session->lock */
int state;
+ atomic_t refcount;
struct list_head running; /* running cmd list */
void *dd_data; /* driver/transport data */
};
@@ -290,8 +293,7 @@ extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
extern int iscsi_check_assign_cmdsn(struct iscsi_session *,
struct iscsi_nopin *);
extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *,
- struct iscsi_data *hdr,
- int transport_data_cnt);
+ struct iscsi_data *hdr);
extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
char *, uint32_t);
extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 00000000000..9582e840166
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,627 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/list.h>
+#include <asm/semaphore.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+
+struct block_device;
+
+enum sas_class {
+ SAS,
+ EXPANDER
+};
+
+enum sas_phy_role {
+ PHY_ROLE_NONE = 0,
+ PHY_ROLE_TARGET = 0x40,
+ PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+ PHY_TYPE_PHYSICAL,
+ PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+ HAE_RESET = 0U,
+ HA_NUM_EVENTS = 1,
+};
+
+enum port_event {
+ PORTE_BYTES_DMAED = 0U,
+ PORTE_BROADCAST_RCVD = 1,
+ PORTE_LINK_RESET_ERR = 2,
+ PORTE_TIMER_EVENT = 3,
+ PORTE_HARD_RESET = 4,
+ PORT_NUM_EVENTS = 5,
+};
+
+enum phy_event {
+ PHYE_LOSS_OF_SIGNAL = 0U,
+ PHYE_OOB_DONE = 1,
+ PHYE_OOB_ERROR = 2,
+ PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
+ PHY_NUM_EVENTS = 4,
+};
+
+enum discover_event {
+ DISCE_DISCOVER_DOMAIN = 0U,
+ DISCE_REVALIDATE_DOMAIN = 1,
+ DISCE_PORT_GONE = 2,
+ DISC_NUM_EVENTS = 3,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define ETASK 0xFA
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
+ attr)
+
+enum routing_attribute {
+ DIRECT_ROUTING,
+ SUBTRACTIVE_ROUTING,
+ TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+ PHY_EMPTY,
+ PHY_VACANT,
+ PHY_NOT_PRESENT,
+ PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+ int phy_id;
+
+ enum ex_phy_state phy_state;
+
+ enum sas_dev_type attached_dev_type;
+ enum sas_linkrate linkrate;
+
+ u8 attached_sata_host:1;
+ u8 attached_sata_dev:1;
+ u8 attached_sata_ps:1;
+
+ enum sas_proto attached_tproto;
+ enum sas_proto attached_iproto;
+
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u8 attached_phy_id;
+
+ u8 phy_change_count;
+ enum routing_attribute routing_attr;
+ u8 virtual:1;
+
+ int last_da_index;
+
+ struct sas_phy *phy;
+ struct sas_port *port;
+};
+
+struct expander_device {
+ struct list_head children;
+
+ u16 ex_change_count;
+ u16 max_route_indexes;
+ u8 num_phys;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+ u8 enclosure_logical_id[8];
+
+ struct ex_phy *ex_phy;
+ struct sas_port *parent_port;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+ ATA_COMMAND_SET = 0,
+ ATAPI_COMMAND_SET = 1,
+};
+
+struct sata_device {
+ enum ata_command_set command_set;
+ struct smp_resp rps_resp; /* report_phy_sata_resp */
+ __le16 *identify_device;
+ __le16 *identify_packet_device;
+
+ u8 port_no; /* port number, if this is a PM (Port) */
+ struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- Domain device ---------- */
+struct domain_device {
+ enum sas_dev_type dev_type;
+
+ enum sas_linkrate linkrate;
+ enum sas_linkrate min_linkrate;
+ enum sas_linkrate max_linkrate;
+
+ int pathways;
+
+ struct domain_device *parent;
+ struct list_head siblings; /* devices on the same level */
+ struct asd_sas_port *port; /* shortcut to root of the tree */
+
+ struct list_head dev_list_node;
+
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ struct sas_rphy *rphy;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ u8 frame_rcvd[32];
+
+ union {
+ struct expander_device ex_dev;
+ struct sata_device sata_dev; /* STP & directly attached */
+ };
+
+ void *lldd_dev;
+};
+
+struct sas_discovery {
+ spinlock_t disc_event_lock;
+ struct work_struct disc_work[DISC_NUM_EVENTS];
+ unsigned long pending;
+ u8 fanout_sas_addr[8];
+ u8 eeds_a[8];
+ u8 eeds_b[8];
+ int max_level;
+};
+
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+ struct completion port_gone_completion;
+
+ struct sas_discovery disc;
+ struct domain_device *port_dev;
+ spinlock_t dev_list_lock;
+ struct list_head dev_list;
+ enum sas_linkrate linkrate;
+
+ struct sas_phy *phy;
+ struct work_struct work;
+
+/* public: */
+ int id;
+
+ enum sas_class class;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_oob_mode oob_mode;
+
+ spinlock_t phy_list_lock;
+ struct list_head phy_list;
+ int num_phys;
+ u32 phy_mask;
+
+ struct sas_ha_struct *ha;
+
+ struct sas_port *port;
+
+ void *lldd_port; /* not touched by the sas class code */
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+ /* protected by ha->event_lock */
+ struct work_struct port_events[PORT_NUM_EVENTS];
+ struct work_struct phy_events[PHY_NUM_EVENTS];
+
+ unsigned long port_events_pending;
+ unsigned long phy_events_pending;
+
+ int error;
+
+ struct sas_phy *phy;
+
+/* public: */
+ /* The following are class:RO, driver:R/W */
+ int enabled; /* must be set */
+
+ int id; /* must be set */
+ enum sas_class class;
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_phy_type type;
+ enum sas_phy_role role;
+ enum sas_oob_mode oob_mode;
+ enum sas_linkrate linkrate;
+
+ u8 *sas_addr; /* must be set */
+ u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+ spinlock_t frame_rcvd_lock;
+ u8 *frame_rcvd; /* must be set */
+ int frame_rcvd_size;
+
+ spinlock_t sas_prim_lock;
+ u32 sas_prim;
+
+ struct list_head port_phy_el; /* driver:RO */
+ struct asd_sas_port *port; /* Class:RW, driver: RO */
+
+ struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+ void *lldd_phy; /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+ struct Scsi_Host *shost;
+
+ spinlock_t task_queue_lock;
+ struct list_head task_queue;
+ int task_queue_size;
+
+ struct semaphore queue_thread_sema;
+ int queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+ spinlock_t event_lock;
+ struct work_struct ha_events[HA_NUM_EVENTS];
+ unsigned long pending;
+
+ struct scsi_core core;
+
+/* public: */
+ char *sas_ha_name;
+ struct pci_dev *pcidev; /* should be set */
+ struct module *lldd_module; /* should be set */
+
+ u8 *sas_addr; /* must be set */
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ spinlock_t phy_port_lock;
+ struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */
+ struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+ int num_phys; /* must be set, gt 0, static */
+
+ /* The class calls this to send a task for execution. */
+ int lldd_max_execute_num;
+ int lldd_queue_size;
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+ void *lldd_ha; /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+ return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+ return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+ return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+ phy->oob_mode = OOB_NOT_CONNECTED;
+ phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+}
+
+/* ---------- Tasks ---------- */
+/*
+ service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
+ exec_status | | |
+ ---------------------+---------------------+-----------------------+
+ SAM_... | X | |
+ DEV_NO_RESPONSE | X | X |
+ INTERRUPTED | X | |
+ QUEUE_FULL | | X |
+ DEVICE_UNKNOWN | | X |
+ SG_ERR | | X |
+ ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+ SAS_TASK_COMPLETE,
+ SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+ SAM_GOOD = 0,
+ SAM_CHECK_COND = 2,
+ SAM_COND_MET = 4,
+ SAM_BUSY = 8,
+ SAM_INTERMEDIATE = 0x10,
+ SAM_IM_COND_MET = 0x12,
+ SAM_RESV_CONFLICT= 0x14,
+ SAM_TASK_SET_FULL= 0x28,
+ SAM_ACA_ACTIVE = 0x30,
+ SAM_TASK_ABORTED = 0x40,
+
+ SAS_DEV_NO_RESPONSE = 0x80,
+ SAS_DATA_UNDERRUN,
+ SAS_DATA_OVERRUN,
+ SAS_INTERRUPTED,
+ SAS_QUEUE_FULL,
+ SAS_DEVICE_UNKNOWN,
+ SAS_SG_ERR,
+ SAS_OPEN_REJECT,
+ SAS_OPEN_TO,
+ SAS_PROTO_RESPONSE,
+ SAS_PHY_DOWN,
+ SAS_NAK_R_ERR,
+ SAS_PENDING,
+ SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * - For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * - For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set. If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+ u16 frame_len;
+ u8 ending_fis[24]; /* dev to host or data-in */
+ u32 sstatus;
+ u32 serror;
+ u32 scontrol;
+ u32 sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+ enum service_response resp;
+ enum exec_status stat;
+ int buf_valid_size;
+
+ u8 buf[SAS_STATUS_BUF_SIZE];
+
+ u32 residual;
+ enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+ struct host_to_dev_fis fis;
+ u8 atapi_packet[16]; /* 0 if not ATAPI task */
+
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 dma_xfer:1; /* PIO:0 or DMA:1 */
+ u8 use_ncq:1;
+ u8 set_affil_pol:1;
+ u8 stp_affil_pol:1;
+
+ u8 device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+ struct scatterlist smp_req;
+ struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+ TASK_ATTR_SIMPLE = 0,
+ TASK_ATTR_HOQ = 1,
+ TASK_ATTR_ORDERED= 2,
+ TASK_ATTR_ACA = 4,
+};
+
+struct sas_ssp_task {
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 LUN[8];
+ u8 enable_first_burst:1;
+ enum task_attribute task_attr;
+ u8 task_prio;
+ u8 cdb[16];
+};
+
+struct sas_task {
+ struct domain_device *dev;
+ struct list_head list;
+
+ spinlock_t task_state_lock;
+ unsigned task_state_flags;
+
+ enum sas_proto task_proto;
+
+ /* Used by the discovery code. */
+ struct timer_list timer;
+ struct completion completion;
+
+ union {
+ struct sas_ata_task ata_task;
+ struct sas_smp_task smp_task;
+ struct sas_ssp_task ssp_task;
+ };
+
+ struct scatterlist *scatter;
+ int num_scatter;
+ u32 total_xfer_len;
+ u8 data_dir:2; /* Use PCI_DMA_... */
+
+ struct task_status_struct task_status;
+ void (*task_done)(struct sas_task *);
+
+ void *lldd_task; /* for use by LLDDs */
+ void *uldd_task;
+};
+
+
+
+#define SAS_TASK_STATE_PENDING 1
+#define SAS_TASK_STATE_DONE 2
+#define SAS_TASK_STATE_ABORTED 4
+
+static inline struct sas_task *sas_alloc_task(gfp_t flags)
+{
+ extern kmem_cache_t *sas_task_cache;
+ struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+ if (task) {
+ memset(task, 0, sizeof(*task));
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+
+ return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ extern kmem_cache_t *sas_task_cache;
+ BUG_ON(!list_empty(&task->list));
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+
+struct sas_domain_function_template {
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct asd_sas_phy *);
+ void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+ /* The class calls these when a device is found or gone. */
+ int (*lldd_dev_found)(struct domain_device *);
+ void (*lldd_dev_gone)(struct domain_device *);
+
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ gfp_t gfp_flags);
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+extern int sas_queuecommand(struct scsi_cmnd *,
+ void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_slave_configure(struct scsi_device *);
+extern void sas_slave_destroy(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+ struct block_device *,
+ sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int sas_discover_sata(struct domain_device *);
+int sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 00000000000..2f4b6afa34f
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,631 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE 8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST 0x40
+#define SMP_RESPONSE 0x41
+
+#define SSP_DATA 0x01
+#define SSP_XFER_RDY 0x05
+#define SSP_COMMAND 0x06
+#define SSP_RESPONSE 0x07
+#define SSP_TASK 0x16
+
+#define SMP_REPORT_GENERAL 0x00
+#define SMP_REPORT_MANUF_INFO 0x01
+#define SMP_READ_GPIO_REG 0x02
+#define SMP_DISCOVER 0x10
+#define SMP_REPORT_PHY_ERR_LOG 0x11
+#define SMP_REPORT_PHY_SATA 0x12
+#define SMP_REPORT_ROUTE_INFO 0x13
+#define SMP_WRITE_GPIO_REG 0x82
+#define SMP_CONF_ROUTE_INFO 0x90
+#define SMP_PHY_CONTROL 0x91
+#define SMP_PHY_TEST_FUNCTION 0x92
+
+#define SMP_RESP_FUNC_ACC 0x00
+#define SMP_RESP_FUNC_UNK 0x01
+#define SMP_RESP_FUNC_FAILED 0x02
+#define SMP_RESP_INV_FRM_LEN 0x03
+#define SMP_RESP_NO_PHY 0x10
+#define SMP_RESP_NO_INDEX 0x11
+#define SMP_RESP_PHY_NO_SATA 0x12
+#define SMP_RESP_PHY_UNK_OP 0x13
+#define SMP_RESP_PHY_UNK_TESTF 0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT 0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK 0x01
+#define TMF_ABORT_TASK_SET 0x02
+#define TMF_CLEAR_TASK_SET 0x04
+#define TMF_LU_RESET 0x08
+#define TMF_CLEAR_ACA 0x40
+#define TMF_QUERY_TASK 0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE 0x00
+#define TMF_RESP_INVALID_FRAME 0x02
+#define TMF_RESP_FUNC_ESUPP 0x04
+#define TMF_RESP_FUNC_FAILED 0x05
+#define TMF_RESP_FUNC_SUCC 0x08
+#define TMF_RESP_NO_LUN 0x09
+#define TMF_RESP_OVERLAPPED_TAG 0x0A
+
+enum sas_oob_mode {
+ OOB_NOT_CONNECTED,
+ SATA_OOB_MODE,
+ SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+ NO_DEVICE = 0, /* protocol */
+ SAS_END_DEV = 1, /* protocol */
+ EDGE_DEV = 2, /* protocol */
+ FANOUT_DEV = 3, /* protocol */
+ SAS_HA = 4,
+ SATA_DEV = 5,
+ SATA_PM = 7,
+ SATA_PM_PORT= 8,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+ SATA_PROTO = 1,
+ SAS_PROTO_SMP = 2, /* protocol */
+ SAS_PROTO_STP = 4, /* protocol */
+ SAS_PROTO_SSP = 8, /* protocol */
+ SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+ PHY_FUNC_NOP,
+ PHY_FUNC_LINK_RESET, /* Enables the phy */
+ PHY_FUNC_HARD_RESET,
+ PHY_FUNC_DISABLE,
+ PHY_FUNC_CLEAR_ERROR_LOG = 5,
+ PHY_FUNC_CLEAR_AFFIL,
+ PHY_FUNC_TX_SATA_PS_SIGNAL,
+ PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+ PHY_FUNC_SET_LINK_RATE,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+ SAS_PRIM_AIP_NORMAL = 1,
+ SAS_PRIM_AIP_R0 = 2,
+ SAS_PRIM_AIP_R1 = 3,
+ SAS_PRIM_AIP_R2 = 4,
+ SAS_PRIM_AIP_WC = 5,
+ SAS_PRIM_AIP_WD = 6,
+ SAS_PRIM_AIP_WP = 7,
+ SAS_PRIM_AIP_RWP = 8,
+
+ SAS_PRIM_BC_CH = 9,
+ SAS_PRIM_BC_RCH0 = 10,
+ SAS_PRIM_BC_RCH1 = 11,
+ SAS_PRIM_BC_R0 = 12,
+ SAS_PRIM_BC_R1 = 13,
+ SAS_PRIM_BC_R2 = 14,
+ SAS_PRIM_BC_R3 = 15,
+ SAS_PRIM_BC_R4 = 16,
+
+ SAS_PRIM_NOTIFY_ENSP= 17,
+ SAS_PRIM_NOTIFY_R0 = 18,
+ SAS_PRIM_NOTIFY_R1 = 19,
+ SAS_PRIM_NOTIFY_R2 = 20,
+
+ SAS_PRIM_CLOSE_CLAF = 21,
+ SAS_PRIM_CLOSE_NORM = 22,
+ SAS_PRIM_CLOSE_R0 = 23,
+ SAS_PRIM_CLOSE_R1 = 24,
+
+ SAS_PRIM_OPEN_RTRY = 25,
+ SAS_PRIM_OPEN_RJCT = 26,
+ SAS_PRIM_OPEN_ACPT = 27,
+
+ SAS_PRIM_DONE = 28,
+ SAS_PRIM_BREAK = 29,
+
+ SATA_PRIM_DMAT = 33,
+ SATA_PRIM_PMNAK = 34,
+ SATA_PRIM_PMACK = 35,
+ SATA_PRIM_PMREQ_S = 36,
+ SATA_PRIM_PMREQ_P = 37,
+ SATA_SATA_R_ERR = 38,
+};
+
+enum sas_open_rej_reason {
+ /* Abandon open */
+ SAS_OREJ_UNKNOWN = 0,
+ SAS_OREJ_BAD_DEST = 1,
+ SAS_OREJ_CONN_RATE = 2,
+ SAS_OREJ_EPROTO = 3,
+ SAS_OREJ_RESV_AB0 = 4,
+ SAS_OREJ_RESV_AB1 = 5,
+ SAS_OREJ_RESV_AB2 = 6,
+ SAS_OREJ_RESV_AB3 = 7,
+ SAS_OREJ_WRONG_DEST= 8,
+ SAS_OREJ_STP_NORES = 9,
+
+ /* Retry open */
+ SAS_OREJ_NO_DEST = 10,
+ SAS_OREJ_PATH_BLOCKED = 11,
+ SAS_OREJ_RSVD_CONT0 = 12,
+ SAS_OREJ_RSVD_CONT1 = 13,
+ SAS_OREJ_RSVD_INIT0 = 14,
+ SAS_OREJ_RSVD_INIT1 = 15,
+ SAS_OREJ_RSVD_STOP0 = 16,
+ SAS_OREJ_RSVD_STOP1 = 17,
+ SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct dev_to_host_fis {
+ u8 fis_type; /* 0x34 */
+ u8 flags;
+ u8 status;
+ u8 error;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 _r_c;
+
+ u32 _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+ u8 fis_type; /* 0x27 */
+ u8 flags;
+ u8 command;
+ u8 features;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 features_exp;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_a;
+ u8 control;
+
+ u32 _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 changing_data_ptr:1;
+ u8 retransmit:1;
+ u8 retry_data_frames:1;
+ u8 _r_c:5;
+
+ u8 num_fill_bytes:2;
+ u8 _r_d:6;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 datapres:2;
+ u8 _r_b:6;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 conf_route_table:1;
+ u8 configuring:1;
+ u8 _r_b:6;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_c:4;
+ u8 attached_dev_type:3;
+ u8 _r_d:1;
+
+ u8 linkrate:4;
+ u8 _r_e:4;
+
+ u8 attached_sata_host:1;
+ u8 iproto:3;
+ u8 _r_f:4;
+
+ u8 attached_sata_dev:1;
+ u8 tproto:3;
+ u8 _r_g:3;
+ u8 attached_sata_ps:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 hmin_linkrate:4;
+ u8 pmin_linkrate:4;
+ u8 hmax_linkrate:4;
+ u8 pmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 pptv:4;
+ u8 _r_i:3;
+ u8 virtual:1;
+
+ u8 routing_attr:4;
+ u8 _r_j:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 affil_valid:1;
+ u8 affil_supp:1;
+ u8 _r_c:6;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 _r_c:5;
+ u8 retry_data_frames:1;
+ u8 retransmit:1;
+ u8 changing_data_ptr:1;
+
+ u8 _r_d:6;
+ u8 num_fill_bytes:2;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 _r_b:6;
+ u8 datapres:2;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 _r_b:6;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_d:1;
+ u8 attached_dev_type:3;
+ u8 _r_c:4;
+
+ u8 _r_e:4;
+ u8 linkrate:4;
+
+ u8 _r_f:4;
+ u8 iproto:3;
+ u8 attached_sata_host:1;
+
+ u8 attached_sata_ps:1;
+ u8 _r_g:3;
+ u8 tproto:3;
+ u8 attached_sata_dev:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 pmin_linkrate:4;
+ u8 hmin_linkrate:4;
+ u8 pmax_linkrate:4;
+ u8 hmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 virtual:1;
+ u8 _r_i:3;
+ u8 pptv:4;
+
+ u8 _r_j:4;
+ u8 routing_attr:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 _r_c:6;
+ u8 affil_supp:1;
+ u8 affil_valid:1;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index c60b8ff2f5e..84a6d5fe092 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -25,13 +25,6 @@ extern const unsigned char scsi_command_size[8];
#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
/*
- * SCSI device types
- */
-
-#define MAX_SCSI_DEVICE_CODE 15
-extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
-
-/*
* Special value for scanning to specify scanning or rescanning of all
* possible channels, (target) ids, or luns on a given shost.
*/
@@ -225,6 +218,9 @@ static inline int scsi_status_is_good(int status)
#define TYPE_RBC 0x0e
#define TYPE_NO_LUN 0x7f
+/* Returns a human-readable name for the device */
+extern const char * scsi_device_type(unsigned type);
+
/*
* standard mode-select header prepended to all mode-select commands
*/
@@ -433,4 +429,10 @@ struct scsi_lun {
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline u32 scsi_to_u32(u8 *ptr)
+{
+ return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
#endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 58e6444eebe..be117f812de 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -118,20 +118,6 @@ struct scsi_cmnd {
unsigned long pid; /* Process ID, starts at 0. Unique per host. */
};
-/*
- * These are the values that scsi_cmd->state can take.
- */
-#define SCSI_STATE_TIMEOUT 0x1000
-#define SCSI_STATE_FINISHED 0x1001
-#define SCSI_STATE_FAILED 0x1002
-#define SCSI_STATE_QUEUED 0x1003
-#define SCSI_STATE_UNUSED 0x1006
-#define SCSI_STATE_DISCONNECTING 0x1008
-#define SCSI_STATE_INITIALIZING 0x1009
-#define SCSI_STATE_BHQUEUE 0x100a
-#define SCSI_STATE_MLQUEUE 0x100b
-
-
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 895d212864c..b401c82036b 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -298,9 +298,9 @@ extern int scsi_execute_async(struct scsi_device *sdev,
void (*done)(void *, char *, int, int),
gfp_t gfp);
-static inline void scsi_device_reprobe(struct scsi_device *sdev)
+static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
{
- device_reprobe(&sdev->sdev_gendev);
+ return device_reprobe(&sdev->sdev_gendev);
}
static inline unsigned int sdev_channel(struct scsi_device *sdev)
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index b3dd90f3e85..39c6f8cc20c 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -16,6 +16,7 @@ struct scsi_target;
struct Scsi_Host;
struct scsi_host_cmd_pool;
struct scsi_transport_template;
+struct blk_queue_tags;
/*
@@ -466,6 +467,12 @@ struct Scsi_Host {
struct scsi_transport_template *transportt;
/*
+ * area to keep a shared tag map (if needed, will be
+ * NULL if not)
+ */
+ struct blk_queue_tag *bqt;
+
+ /*
* The following two fields are protected with host_lock;
* however, eh routines can safely access during eh processing
* without acquiring the lock.
diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
new file mode 100644
index 00000000000..8c1470cc820
--- /dev/null
+++ b/include/scsi/scsi_netlink.h
@@ -0,0 +1,87 @@
+/*
+ * SCSI Transport Netlink Interface
+ * Used for the posting of outbound SCSI transport events
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_H
+#define SCSI_NETLINK_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/* Single Netlink Message type to send all SCSI Transport messages */
+#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1
+
+/* SCSI Transport Broadcast Groups */
+ /* leaving groups 0 and 1 unassigned */
+#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */
+#define SCSI_NL_GRP_CNT 3
+
+
+/* SCSI_TRANSPORT_MSG event message header */
+struct scsi_nl_hdr {
+ uint8_t version;
+ uint8_t transport;
+ uint16_t magic;
+ uint16_t msgtype;
+ uint16_t msglen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+/* scsi_nl_hdr->version value */
+#define SCSI_NL_VERSION 1
+
+/* scsi_nl_hdr->magic value */
+#define SCSI_NL_MAGIC 0xA1B2
+
+/* scsi_nl_hdr->transport value */
+#define SCSI_NL_TRANSPORT 0
+#define SCSI_NL_TRANSPORT_FC 1
+#define SCSI_NL_MAX_TRANSPORTS 2
+
+/* scsi_nl_hdr->msgtype values are defined in each transport */
+
+
+/*
+ * Vendor ID:
+ * If transports post vendor-unique events, they must pass a well-known
+ * 32-bit vendor identifier. This identifier consists of 8 bits indicating
+ * the "type" of identifier contained, and 24 bits of id data.
+ *
+ * Identifiers for each type:
+ * PCI : ID data is the 16 bit PCI Registered Vendor ID
+ */
+#define SCSI_NL_VID_TYPE_SHIFT 56
+#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+
+
+#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \
+ { \
+ (hdr)->version = SCSI_NL_VERSION; \
+ (hdr)->transport = t; \
+ (hdr)->magic = SCSI_NL_MAGIC; \
+ (hdr)->msgtype = mtype; \
+ (hdr)->msglen = mlen; \
+ }
+
+
+#endif /* SCSI_NETLINK_H */
+
diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h
new file mode 100644
index 00000000000..cbf76e47976
--- /dev/null
+++ b/include/scsi/scsi_netlink_fc.h
@@ -0,0 +1,71 @@
+/*
+ * FC Transport Netlink Interface
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_FC_H
+#define SCSI_NETLINK_FC_H
+
+#include <scsi/scsi_netlink.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport Message Types
+ */
+ /* kernel -> user */
+#define FC_NL_ASYNC_EVENT 0x0100
+ /* user -> kernel */
+/* none */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7)
+
+
+/*
+ * FC Transport Broadcast Event Message :
+ * FC_NL_ASYNC_EVENT
+ *
+ * Note: if Vendor Unique message, &event_data will be start of
+ * vendor unique payload, and the length of the payload is
+ * per event_datalen
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified in scsi_netlink.h
+ */
+struct fc_nl_event {
+ struct scsi_nl_hdr snlh; /* must be 1st element ! */
+ uint64_t seconds;
+ uint64_t vendor_id;
+ uint16_t host_no;
+ uint16_t event_datalen;
+ uint32_t event_num;
+ uint32_t event_code;
+ uint32_t event_data;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+#endif /* SCSI_NETLINK_FC_H */
+
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
index e47e36a4ef4..c247a28259b 100644
--- a/include/scsi/scsi_tcq.h
+++ b/include/scsi/scsi_tcq.h
@@ -4,7 +4,7 @@
#include <linux/blkdev.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
-
+#include <scsi/scsi_host.h>
#define MSG_SIMPLE_TAG 0x20
#define MSG_HEAD_TAG 0x21
@@ -13,6 +13,7 @@
#define SCSI_NO_TAG (-1) /* identify no tag in use */
+#ifdef CONFIG_BLOCK
/**
* scsi_get_tag_type - get the type of tag the device supports
@@ -66,7 +67,8 @@ static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
return;
if (!blk_queue_tagged(sdev->request_queue))
- blk_queue_init_tags(sdev->request_queue, depth, NULL);
+ blk_queue_init_tags(sdev->request_queue, depth,
+ sdev->host->bqt);
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
}
@@ -98,7 +100,7 @@ static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg)
struct scsi_device *sdev = cmd->device;
if (blk_rq_tagged(req)) {
- if (sdev->ordered_tags && req->flags & REQ_HARDBARRIER)
+ if (sdev->ordered_tags && req->cmd_flags & REQ_HARDBARRIER)
*msg++ = MSG_ORDERED_TAG;
else
*msg++ = MSG_SIMPLE_TAG;
@@ -131,4 +133,16 @@ static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
return sdev->current_cmnd;
}
+/**
+ * scsi_init_shared_tag_map - create a shared tag map
+ * @shost: the host to share the tag map among all devices
+ * @depth: the total depth of the map
+ */
+static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
+{
+ shost->bqt = blk_init_tags(depth);
+ return shost->bqt ? 0 : -ENOMEM;
+}
+
+#endif /* CONFIG_BLOCK */
#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 6d28b031765..fd352323378 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -29,6 +29,7 @@
#include <linux/sched.h>
#include <scsi/scsi.h>
+#include <scsi/scsi_netlink.h>
struct scsi_transport_template;
@@ -194,6 +195,7 @@ struct fc_rport { /* aka fc_starget_attrs */
u32 roles;
enum fc_port_state port_state; /* Will only be ONLINE or UNKNOWN */
u32 scsi_target_id;
+ u32 fast_io_fail_tmo;
/* exported data */
void *dd_data; /* Used for driver-specific storage */
@@ -206,6 +208,7 @@ struct fc_rport { /* aka fc_starget_attrs */
struct device dev;
struct work_struct dev_loss_work;
struct work_struct scan_work;
+ struct work_struct fail_io_work;
struct work_struct stgt_delete_work;
struct work_struct rport_delete_work;
} __attribute__((aligned(sizeof(unsigned long))));
@@ -284,6 +287,30 @@ struct fc_host_statistics {
/*
+ * FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
+ */
+
+/*
+ * fc_host_event_code: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_host_event_code {
+ FCH_EVT_LIP = 0x1,
+ FCH_EVT_LINKUP = 0x2,
+ FCH_EVT_LINKDOWN = 0x3,
+ FCH_EVT_LIPRESET = 0x4,
+ FCH_EVT_RSCN = 0x5,
+ FCH_EVT_ADAPTER_CHANGE = 0x103,
+ FCH_EVT_PORT_UNKNOWN = 0x200,
+ FCH_EVT_PORT_OFFLINE = 0x201,
+ FCH_EVT_PORT_ONLINE = 0x202,
+ FCH_EVT_PORT_FABRIC = 0x204,
+ FCH_EVT_LINK_UNKNOWN = 0x500,
+ FCH_EVT_VENDOR_UNIQUE = 0xffff,
+};
+
+
+/*
* FC Local Port (Host) Attributes
*
* Attributes are based on HBAAPI V2.0 definitions.
@@ -312,7 +339,6 @@ struct fc_host_attrs {
u64 permanent_port_name;
u32 supported_classes;
u8 supported_fc4s[FC_FC4_LIST_SIZE];
- char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
u32 supported_speeds;
u32 maxframe_size;
char serial_number[FC_SERIAL_NUMBER_SIZE];
@@ -324,6 +350,8 @@ struct fc_host_attrs {
u8 active_fc4s[FC_FC4_LIST_SIZE];
u32 speed;
u64 fabric_name;
+ char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+ char system_hostname[FC_SYMBOLIC_NAME_SIZE];
/* Private (Transport-managed) Attributes */
enum fc_tgtid_binding_type tgtid_bind_type;
@@ -354,8 +382,6 @@ struct fc_host_attrs {
(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
#define fc_host_supported_fc4s(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
-#define fc_host_symbolic_name(x) \
- (((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
#define fc_host_supported_speeds(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
#define fc_host_maxframe_size(x) \
@@ -374,6 +400,10 @@ struct fc_host_attrs {
(((struct fc_host_attrs *)(x)->shost_data)->speed)
#define fc_host_fabric_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_symbolic_name(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_system_hostname(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
#define fc_host_tgtid_bind_type(x) \
(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
#define fc_host_rports(x) \
@@ -409,12 +439,17 @@ struct fc_function_template {
void (*get_host_active_fc4s)(struct Scsi_Host *);
void (*get_host_speed)(struct Scsi_Host *);
void (*get_host_fabric_name)(struct Scsi_Host *);
+ void (*get_host_symbolic_name)(struct Scsi_Host *);
+ void (*set_host_system_hostname)(struct Scsi_Host *);
struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
void (*reset_fc_host_stats)(struct Scsi_Host *);
int (*issue_fc_host_lip)(struct Scsi_Host *);
+ void (*dev_loss_tmo_callbk)(struct fc_rport *);
+ void (*terminate_rport_io)(struct fc_rport *);
+
/* allocation lengths for host-specific data */
u32 dd_fcrport_size;
@@ -445,7 +480,6 @@ struct fc_function_template {
unsigned long show_host_permanent_port_name:1;
unsigned long show_host_supported_classes:1;
unsigned long show_host_supported_fc4s:1;
- unsigned long show_host_symbolic_name:1;
unsigned long show_host_supported_speeds:1;
unsigned long show_host_maxframe_size:1;
unsigned long show_host_serial_number:1;
@@ -456,6 +490,8 @@ struct fc_function_template {
unsigned long show_host_active_fc4s:1;
unsigned long show_host_speed:1;
unsigned long show_host_fabric_name:1;
+ unsigned long show_host_symbolic_name:1;
+ unsigned long show_host_system_hostname:1;
};
@@ -491,6 +527,25 @@ fc_remote_port_chkready(struct fc_rport *rport)
return result;
}
+static inline u64 wwn_to_u64(u8 *wwn)
+{
+ return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
+ (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
+ (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
+ (u64)wwn[6] << 8 | (u64)wwn[7];
+}
+
+static inline void u64_to_wwn(u64 inm, u8 *wwn)
+{
+ wwn[0] = (inm >> 56) & 0xff;
+ wwn[1] = (inm >> 48) & 0xff;
+ wwn[2] = (inm >> 40) & 0xff;
+ wwn[3] = (inm >> 32) & 0xff;
+ wwn[4] = (inm >> 24) & 0xff;
+ wwn[5] = (inm >> 16) & 0xff;
+ wwn[6] = (inm >> 8) & 0xff;
+ wwn[7] = inm & 0xff;
+}
struct scsi_transport_template *fc_attach_transport(
struct fc_function_template *);
@@ -501,13 +556,14 @@ struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
void fc_remote_port_delete(struct fc_rport *rport);
void fc_remote_port_rolechg(struct fc_rport *rport, u32 roles);
int scsi_is_fc_rport(const struct device *);
-
-static inline u64 wwn_to_u64(u8 *wwn)
-{
- return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
- (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
- (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
- (u64)wwn[6] << 8 | (u64)wwn[7];
-}
+u32 fc_get_event_number(void);
+void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+ enum fc_host_event_code event_code, u32 event_data);
+void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+ u32 data_len, char * data_buf, u64 vendor_id);
+ /* Note: when specifying vendor_id to fc_host_post_vendor_event()
+ * be sure to read the Vendor Type and ID formatting requirements
+ * specified in scsi_netlink.h
+ */
#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 6cc2314098c..53024377f3b 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -24,15 +24,23 @@ enum sas_protocol {
};
enum sas_linkrate {
- SAS_LINK_RATE_UNKNOWN,
- SAS_PHY_DISABLED,
- SAS_LINK_RATE_FAILED,
- SAS_SATA_SPINUP_HOLD,
- SAS_SATA_PORT_SELECTOR,
- SAS_LINK_RATE_1_5_GBPS,
- SAS_LINK_RATE_3_0_GBPS,
- SAS_LINK_RATE_6_0_GBPS,
- SAS_LINK_VIRTUAL,
+ /* These Values are defined in the SAS standard */
+ SAS_LINK_RATE_UNKNOWN = 0,
+ SAS_PHY_DISABLED = 1,
+ SAS_PHY_RESET_PROBLEM = 2,
+ SAS_SATA_SPINUP_HOLD = 3,
+ SAS_SATA_PORT_SELECTOR = 4,
+ SAS_PHY_RESET_IN_PROGRESS = 5,
+ SAS_LINK_RATE_1_5_GBPS = 8,
+ SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+ SAS_LINK_RATE_3_0_GBPS = 9,
+ SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+ SAS_LINK_RATE_6_0_GBPS = 10,
+ /* These are virtual to the transport class and may never
+ * be signalled normally since the standard defined field
+ * is only 4 bits */
+ SAS_LINK_RATE_FAILED = 0x10,
+ SAS_PHY_VIRTUAL = 0x11,
};
struct sas_identify {
@@ -57,9 +65,6 @@ struct sas_phy {
enum sas_linkrate maximum_linkrate_hw;
enum sas_linkrate maximum_linkrate;
- /* internal state */
- unsigned int local_attached : 1;
-
/* link error statistics */
u32 invalid_dword_count;
u32 running_disparity_error_count;
@@ -145,12 +150,18 @@ struct sas_port {
#define transport_class_to_sas_port(cdev) \
dev_to_sas_port((cdev)->dev)
+struct sas_phy_linkrates {
+ enum sas_linkrate maximum_linkrate;
+ enum sas_linkrate minimum_linkrate;
+};
+
/* The functions by which the transport class and the driver communicate */
struct sas_function_template {
int (*get_linkerrors)(struct sas_phy *);
int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
int (*get_bay_identifier)(struct sas_rphy *);
int (*phy_reset)(struct sas_phy *, int);
+ int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
};
@@ -196,4 +207,6 @@ scsi_is_sas_expander_device(struct device *dev)
rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
}
+#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
+
#endif /* SCSI_TRANSPORT_SAS_H */
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
index 302680c0c0d..da180f73847 100644
--- a/include/scsi/scsi_transport_spi.h
+++ b/include/scsi/scsi_transport_spi.h
@@ -53,7 +53,8 @@ struct spi_transport_attrs {
unsigned int support_ius; /* support Information Units */
unsigned int support_qas; /* supports quick arbitration and selection */
/* Private Fields */
- unsigned int dv_pending:1; /* Internal flag */
+ unsigned int dv_pending:1; /* Internal flag: DV Requested */
+ unsigned int dv_in_progress:1; /* Internal: DV started */
struct mutex dv_mutex; /* semaphore to serialise dv */
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 01:35:48 +0000