diff options
Diffstat (limited to 'include/sound')
| -rw-r--r-- | include/sound/jack.h | 8 | ||||
| -rw-r--r-- | include/sound/soc-dai.h | 7 | ||||
| -rw-r--r-- | include/sound/soc-dapm.h | 5 | ||||
| -rw-r--r-- | include/sound/soc.h | 20 | ||||
| -rw-r--r-- | include/sound/tlv320dac33-plat.h | 1 | ||||
| -rw-r--r-- | include/sound/wm8903.h | 249 | ||||
| -rw-r--r-- | include/sound/wm8904.h | 110 | ||||
| -rw-r--r-- | include/sound/wm8960.h | 24 |
8 files changed, 416 insertions, 8 deletions
diff --git a/include/sound/jack.h b/include/sound/jack.h index f236e426a70..d90b9fa3270 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -42,6 +42,11 @@ enum snd_jack_types { SND_JACK_MECHANICAL = 0x0008, /* If detected separately */ SND_JACK_VIDEOOUT = 0x0010, SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT, + + /* Kept separate from switches to facilitate implementation */ + SND_JACK_BTN_0 = 0x4000, + SND_JACK_BTN_1 = 0x2000, + SND_JACK_BTN_2 = 0x1000, }; struct snd_jack { @@ -50,6 +55,7 @@ struct snd_jack { int type; const char *id; char name[100]; + unsigned int key[3]; /* Keep in sync with definitions above */ void *private_data; void (*private_free)(struct snd_jack *); }; @@ -59,6 +65,8 @@ struct snd_jack { int snd_jack_new(struct snd_card *card, const char *id, int type, struct snd_jack **jack); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent); +int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type, + int keytype); void snd_jack_report(struct snd_jack *jack, int status); diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 0a0b019d41a..377693a1438 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -182,6 +182,12 @@ struct snd_soc_dai_ops { struct snd_soc_dai *); int (*trigger)(struct snd_pcm_substream *, int, struct snd_soc_dai *); + /* + * For hardware based FIFO caused delay reporting. + * Optional. + */ + snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *, + struct snd_soc_dai *); }; /* @@ -215,7 +221,6 @@ struct snd_soc_dai { unsigned int symmetric_rates:1; /* DAI runtime info */ - struct snd_pcm_runtime *runtime; struct snd_soc_codec *codec; unsigned int active; unsigned char pop_wait:1; diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index c0922a03422..d5d6ba862df 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -339,6 +339,8 @@ int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin); int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin); int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin); int snd_soc_dapm_sync(struct snd_soc_codec *codec); +int snd_soc_dapm_force_enable_pin(struct snd_soc_codec *codec, + const char *pin); /* dapm widget types */ enum snd_soc_dapm_type { @@ -425,9 +427,8 @@ struct snd_soc_dapm_widget { unsigned char connected:1; /* connected codec pin */ unsigned char new:1; /* cnew complete */ unsigned char ext:1; /* has external widgets */ - unsigned char muted:1; /* muted for pop reduction */ unsigned char suspend:1; /* was active before suspend */ - unsigned char pmdown:1; /* waiting for timeout */ + unsigned char force:1; /* force state */ int (*power_check)(struct snd_soc_dapm_widget *w); diff --git a/include/sound/soc.h b/include/sound/soc.h index a57fbfcd4c8..4ab3dad4a9c 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/notifier.h> #include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -212,6 +213,7 @@ struct snd_soc_dai_mode; struct snd_soc_pcm_runtime; struct snd_soc_dai; struct snd_soc_platform; +struct snd_soc_dai_link; struct snd_soc_codec; struct soc_enum; struct snd_soc_ac97_ops; @@ -260,6 +262,10 @@ int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask); int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, struct snd_soc_jack_pin *pins); +void snd_soc_jack_notifier_register(struct snd_soc_jack *jack, + struct notifier_block *nb); +void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack, + struct notifier_block *nb); #ifdef CONFIG_GPIOLIB int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, struct snd_soc_jack_gpio *gpios); @@ -363,6 +369,7 @@ struct snd_soc_jack { struct snd_soc_card *card; struct list_head pins; int status; + struct blocking_notifier_head notifier; }; /* SoC PCM stream information */ @@ -374,7 +381,7 @@ struct snd_soc_pcm_stream { unsigned int rate_max; /* max rate */ unsigned int channels_min; /* min channels */ unsigned int channels_max; /* max channels */ - unsigned int active:1; /* stream is in use */ + unsigned int active; /* stream is in use */ void *dma_data; /* used by platform code */ }; @@ -462,14 +469,21 @@ struct snd_soc_platform { int (*probe)(struct platform_device *pdev); int (*remove)(struct platform_device *pdev); - int (*suspend)(struct snd_soc_dai *dai); - int (*resume)(struct snd_soc_dai *dai); + int (*suspend)(struct snd_soc_dai_link *dai_link); + int (*resume)(struct snd_soc_dai_link *dai_link); /* pcm creation and destruction */ int (*pcm_new)(struct snd_card *, struct snd_soc_dai *, struct snd_pcm *); void (*pcm_free)(struct snd_pcm *); + /* + * For platform caused delay reporting. + * Optional. + */ + snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *, + struct snd_soc_dai *); + /* platform stream ops */ struct snd_pcm_ops *pcm_ops; }; diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index ac0665264bd..3f428d53195 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -15,6 +15,7 @@ struct tlv320dac33_platform_data { int power_gpio; + int keep_bclk; /* Keep the BCLK running in FIFO modes */ u8 burst_bclkdiv; }; diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h new file mode 100644 index 00000000000..b4a0db2307e --- /dev/null +++ b/include/sound/wm8903.h @@ -0,0 +1,249 @@ +/* + * linux/sound/wm8903.h -- Platform data for WM8903 + * + * Copyright 2010 Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_WM8903_H +#define __LINUX_SND_WM8903_H + +/* Used to enable configuration of a GPIO to all zeros */ +#define WM8903_GPIO_NO_CONFIG 0x8000 + +/* + * R6 (0x06) - Mic Bias Control 0 + */ +#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */ +#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ +#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ +#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ +#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */ +#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */ + +/* + * R116 (0x74) - GPIO Control 1 + */ +#define WM8903_GP1_FN_MASK 0x1F00 /* GP1_FN - [12:8] */ +#define WM8903_GP1_FN_SHIFT 8 /* GP1_FN - [12:8] */ +#define WM8903_GP1_FN_WIDTH 5 /* GP1_FN - [12:8] */ +#define WM8903_GP1_DIR 0x0080 /* GP1_DIR */ +#define WM8903_GP1_DIR_MASK 0x0080 /* GP1_DIR */ +#define WM8903_GP1_DIR_SHIFT 7 /* GP1_DIR */ +#define WM8903_GP1_DIR_WIDTH 1 /* GP1_DIR */ +#define WM8903_GP1_OP_CFG 0x0040 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_MASK 0x0040 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_SHIFT 6 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */ +#define WM8903_GP1_IP_CFG 0x0020 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_MASK 0x0020 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_SHIFT 5 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_WIDTH 1 /* GP1_IP_CFG */ +#define WM8903_GP1_LVL 0x0010 /* GP1_LVL */ +#define WM8903_GP1_LVL_MASK 0x0010 /* GP1_LVL */ +#define WM8903_GP1_LVL_SHIFT 4 /* GP1_LVL */ +#define WM8903_GP1_LVL_WIDTH 1 /* GP1_LVL */ +#define WM8903_GP1_PD 0x0008 /* GP1_PD */ +#define WM8903_GP1_PD_MASK 0x0008 /* GP1_PD */ +#define WM8903_GP1_PD_SHIFT 3 /* GP1_PD */ +#define WM8903_GP1_PD_WIDTH 1 /* GP1_PD */ +#define WM8903_GP1_PU 0x0004 /* GP1_PU */ +#define WM8903_GP1_PU_MASK 0x0004 /* GP1_PU */ +#define WM8903_GP1_PU_SHIFT 2 /* GP1_PU */ +#define WM8903_GP1_PU_WIDTH 1 /* GP1_PU */ +#define WM8903_GP1_INTMODE 0x0002 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_MASK 0x0002 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_SHIFT 1 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_WIDTH 1 /* GP1_INTMODE */ +#define WM8903_GP1_DB 0x0001 /* GP1_DB */ +#define WM8903_GP1_DB_MASK 0x0001 /* GP1_DB */ +#define WM8903_GP1_DB_SHIFT 0 /* GP1_DB */ +#define WM8903_GP1_DB_WIDTH 1 /* GP1_DB */ + +/* + * R117 (0x75) - GPIO Control 2 + */ +#define WM8903_GP2_FN_MASK 0x1F00 /* GP2_FN - [12:8] */ +#define WM8903_GP2_FN_SHIFT 8 /* GP2_FN - [12:8] */ +#define WM8903_GP2_FN_WIDTH 5 /* GP2_FN - [12:8] */ +#define WM8903_GP2_DIR 0x0080 /* GP2_DIR */ +#define WM8903_GP2_DIR_MASK 0x0080 /* GP2_DIR */ +#define WM8903_GP2_DIR_SHIFT 7 /* GP2_DIR */ +#define WM8903_GP2_DIR_WIDTH 1 /* GP2_DIR */ +#define WM8903_GP2_OP_CFG 0x0040 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_MASK 0x0040 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_SHIFT 6 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */ +#define WM8903_GP2_IP_CFG 0x0020 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_MASK 0x0020 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_SHIFT 5 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_WIDTH 1 /* GP2_IP_CFG */ +#define WM8903_GP2_LVL 0x0010 /* GP2_LVL */ +#define WM8903_GP2_LVL_MASK 0x0010 /* GP2_LVL */ +#define WM8903_GP2_LVL_SHIFT 4 /* GP2_LVL */ +#define WM8903_GP2_LVL_WIDTH 1 /* GP2_LVL */ +#define WM8903_GP2_PD 0x0008 /* GP2_PD */ +#define WM8903_GP2_PD_MASK 0x0008 /* GP2_PD */ +#define WM8903_GP2_PD_SHIFT 3 /* GP2_PD */ +#define WM8903_GP2_PD_WIDTH 1 /* GP2_PD */ +#define WM8903_GP2_PU 0x0004 /* GP2_PU */ +#define WM8903_GP2_PU_MASK 0x0004 /* GP2_PU */ +#define WM8903_GP2_PU_SHIFT 2 /* GP2_PU */ +#define WM8903_GP2_PU_WIDTH 1 /* GP2_PU */ +#define WM8903_GP2_INTMODE 0x0002 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_MASK 0x0002 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_SHIFT 1 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_WIDTH 1 /* GP2_INTMODE */ +#define WM8903_GP2_DB 0x0001 /* GP2_DB */ +#define WM8903_GP2_DB_MASK 0x0001 /* GP2_DB */ +#define WM8903_GP2_DB_SHIFT 0 /* GP2_DB */ +#define WM8903_GP2_DB_WIDTH 1 /* GP2_DB */ + +/* + * R118 (0x76) - GPIO Control 3 + */ +#define WM8903_GP3_FN_MASK 0x1F00 /* GP3_FN - [12:8] */ +#define WM8903_GP3_FN_SHIFT 8 /* GP3_FN - [12:8] */ +#define WM8903_GP3_FN_WIDTH 5 /* GP3_FN - [12:8] */ +#define WM8903_GP3_DIR 0x0080 /* GP3_DIR */ +#define WM8903_GP3_DIR_MASK 0x0080 /* GP3_DIR */ +#define WM8903_GP3_DIR_SHIFT 7 /* GP3_DIR */ +#define WM8903_GP3_DIR_WIDTH 1 /* GP3_DIR */ +#define WM8903_GP3_OP_CFG 0x0040 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_MASK 0x0040 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_SHIFT 6 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */ +#define WM8903_GP3_IP_CFG 0x0020 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_MASK 0x0020 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_SHIFT 5 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_WIDTH 1 /* GP3_IP_CFG */ +#define WM8903_GP3_LVL 0x0010 /* GP3_LVL */ +#define WM8903_GP3_LVL_MASK 0x0010 /* GP3_LVL */ +#define WM8903_GP3_LVL_SHIFT 4 /* GP3_LVL */ +#define WM8903_GP3_LVL_WIDTH 1 /* GP3_LVL */ +#define WM8903_GP3_PD 0x0008 /* GP3_PD */ +#define WM8903_GP3_PD_MASK 0x0008 /* GP3_PD */ +#define WM8903_GP3_PD_SHIFT 3 /* GP3_PD */ +#define WM8903_GP3_PD_WIDTH 1 /* GP3_PD */ +#define WM8903_GP3_PU 0x0004 /* GP3_PU */ +#define WM8903_GP3_PU_MASK 0x0004 /* GP3_PU */ +#define WM8903_GP3_PU_SHIFT 2 /* GP3_PU */ +#define WM8903_GP3_PU_WIDTH 1 /* GP3_PU */ +#define WM8903_GP3_INTMODE 0x0002 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_MASK 0x0002 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_SHIFT 1 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_WIDTH 1 /* GP3_INTMODE */ +#define WM8903_GP3_DB 0x0001 /* GP3_DB */ +#define WM8903_GP3_DB_MASK 0x0001 /* GP3_DB */ +#define WM8903_GP3_DB_SHIFT 0 /* GP3_DB */ +#define WM8903_GP3_DB_WIDTH 1 /* GP3_DB */ + +/* + * R119 (0x77) - GPIO Control 4 + */ +#define WM8903_GP4_FN_MASK 0x1F00 /* GP4_FN - [12:8] */ +#define WM8903_GP4_FN_SHIFT 8 /* GP4_FN - [12:8] */ +#define WM8903_GP4_FN_WIDTH 5 /* GP4_FN - [12:8] */ +#define WM8903_GP4_DIR 0x0080 /* GP4_DIR */ +#define WM8903_GP4_DIR_MASK 0x0080 /* GP4_DIR */ +#define WM8903_GP4_DIR_SHIFT 7 /* GP4_DIR */ +#define WM8903_GP4_DIR_WIDTH 1 /* GP4_DIR */ +#define WM8903_GP4_OP_CFG 0x0040 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_MASK 0x0040 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_SHIFT 6 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */ +#define WM8903_GP4_IP_CFG 0x0020 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_MASK 0x0020 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_SHIFT 5 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_WIDTH 1 /* GP4_IP_CFG */ +#define WM8903_GP4_LVL 0x0010 /* GP4_LVL */ +#define WM8903_GP4_LVL_MASK 0x0010 /* GP4_LVL */ +#define WM8903_GP4_LVL_SHIFT 4 /* GP4_LVL */ +#define WM8903_GP4_LVL_WIDTH 1 /* GP4_LVL */ +#define WM8903_GP4_PD 0x0008 /* GP4_PD */ +#define WM8903_GP4_PD_MASK 0x0008 /* GP4_PD */ +#define WM8903_GP4_PD_SHIFT 3 /* GP4_PD */ +#define WM8903_GP4_PD_WIDTH 1 /* GP4_PD */ +#define WM8903_GP4_PU 0x0004 /* GP4_PU */ +#define WM8903_GP4_PU_MASK 0x0004 /* GP4_PU */ +#define WM8903_GP4_PU_SHIFT 2 /* GP4_PU */ +#define WM8903_GP4_PU_WIDTH 1 /* GP4_PU */ +#define WM8903_GP4_INTMODE 0x0002 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_MASK 0x0002 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_SHIFT 1 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_WIDTH 1 /* GP4_INTMODE */ +#define WM8903_GP4_DB 0x0001 /* GP4_DB */ +#define WM8903_GP4_DB_MASK 0x0001 /* GP4_DB */ +#define WM8903_GP4_DB_SHIFT 0 /* GP4_DB */ +#define WM8903_GP4_DB_WIDTH 1 /* GP4_DB */ + +/* + * R120 (0x78) - GPIO Control 5 + */ +#define WM8903_GP5_FN_MASK 0x1F00 /* GP5_FN - [12:8] */ +#define WM8903_GP5_FN_SHIFT 8 /* GP5_FN - [12:8] */ +#define WM8903_GP5_FN_WIDTH 5 /* GP5_FN - [12:8] */ +#define WM8903_GP5_DIR 0x0080 /* GP5_DIR */ +#define WM8903_GP5_DIR_MASK 0x0080 /* GP5_DIR */ +#define WM8903_GP5_DIR_SHIFT 7 /* GP5_DIR */ +#define WM8903_GP5_DIR_WIDTH 1 /* GP5_DIR */ +#define WM8903_GP5_OP_CFG 0x0040 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_MASK 0x0040 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_SHIFT 6 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */ +#define WM8903_GP5_IP_CFG 0x0020 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_MASK 0x0020 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_SHIFT 5 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_WIDTH 1 /* GP5_IP_CFG */ +#define WM8903_GP5_LVL 0x0010 /* GP5_LVL */ +#define WM8903_GP5_LVL_MASK 0x0010 /* GP5_LVL */ +#define WM8903_GP5_LVL_SHIFT 4 /* GP5_LVL */ +#define WM8903_GP5_LVL_WIDTH 1 /* GP5_LVL */ +#define WM8903_GP5_PD 0x0008 /* GP5_PD */ +#define WM8903_GP5_PD_MASK 0x0008 /* GP5_PD */ +#define WM8903_GP5_PD_SHIFT 3 /* GP5_PD */ +#define WM8903_GP5_PD_WIDTH 1 /* GP5_PD */ +#define WM8903_GP5_PU 0x0004 /* GP5_PU */ +#define WM8903_GP5_PU_MASK 0x0004 /* GP5_PU */ +#define WM8903_GP5_PU_SHIFT 2 /* GP5_PU */ +#define WM8903_GP5_PU_WIDTH 1 /* GP5_PU */ +#define WM8903_GP5_INTMODE 0x0002 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_MASK 0x0002 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_SHIFT 1 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_WIDTH 1 /* GP5_INTMODE */ +#define WM8903_GP5_DB 0x0001 /* GP5_DB */ +#define WM8903_GP5_DB_MASK 0x0001 /* GP5_DB */ +#define WM8903_GP5_DB_SHIFT 0 /* GP5_DB */ +#define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */ + +struct wm8903_platform_data { + bool irq_active_low; /* Set if IRQ active low, default high */ + + /* Default register value for R6 (Mic bias), used to configure + * microphone detection. In conjunction with gpio_cfg this + * can be used to route the microphone status signals out onto + * the GPIOs for use with snd_soc_jack_add_gpios(). + */ + u16 micdet_cfg; + + int micdet_delay; /* Delay after microphone detection (ms) */ + + u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */ +}; + +#endif diff --git a/include/sound/wm8904.h b/include/sound/wm8904.h index d66575a601b..898be3a8db9 100644 --- a/include/sound/wm8904.h +++ b/include/sound/wm8904.h @@ -15,8 +15,111 @@ #ifndef __MFD_WM8994_PDATA_H__ #define __MFD_WM8994_PDATA_H__ -#define WM8904_DRC_REGS 4 -#define WM8904_EQ_REGS 25 +/* Used to enable configuration of a GPIO to all zeros */ +#define WM8904_GPIO_NO_CONFIG 0x8000 + +/* + * R6 (0x06) - Mic Bias Control 0 + */ +#define WM8904_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */ +#define WM8904_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */ +#define WM8904_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */ +#define WM8904_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ +#define WM8904_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ +#define WM8904_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ +#define WM8904_MICDET_ENA 0x0002 /* MICDET_ENA */ +#define WM8904_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */ +#define WM8904_MICDET_ENA_SHIFT 1 /* MICDET_ENA */ +#define WM8904_MICDET_ENA_WIDTH 1 /* MICDET_ENA */ +#define WM8904_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */ +#define WM8904_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */ +#define WM8904_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */ +#define WM8904_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */ + +/* + * R7 (0x07) - Mic Bias Control 1 + */ +#define WM8904_MIC_DET_FILTER_ENA 0x8000 /* MIC_DET_FILTER_ENA */ +#define WM8904_MIC_DET_FILTER_ENA_MASK 0x8000 /* MIC_DET_FILTER_ENA */ +#define WM8904_MIC_DET_FILTER_ENA_SHIFT 15 /* MIC_DET_FILTER_ENA */ +#define WM8904_MIC_DET_FILTER_ENA_WIDTH 1 /* MIC_DET_FILTER_ENA */ +#define WM8904_MIC_SHORT_FILTER_ENA 0x4000 /* MIC_SHORT_FILTER_ENA */ +#define WM8904_MIC_SHORT_FILTER_ENA_MASK 0x4000 /* MIC_SHORT_FILTER_ENA */ +#define WM8904_MIC_SHORT_FILTER_ENA_SHIFT 14 /* MIC_SHORT_FILTER_ENA */ +#define WM8904_MIC_SHORT_FILTER_ENA_WIDTH 1 /* MIC_SHORT_FILTER_ENA */ +#define WM8904_MICBIAS_SEL_MASK 0x0007 /* MICBIAS_SEL - [2:0] */ +#define WM8904_MICBIAS_SEL_SHIFT 0 /* MICBIAS_SEL - [2:0] */ +#define WM8904_MICBIAS_SEL_WIDTH 3 /* MICBIAS_SEL - [2:0] */ + + +/* + * R121 (0x79) - GPIO Control 1 + */ +#define WM8904_GPIO1_PU 0x0020 /* GPIO1_PU */ +#define WM8904_GPIO1_PU_MASK 0x0020 /* GPIO1_PU */ +#define WM8904_GPIO1_PU_SHIFT 5 /* GPIO1_PU */ +#define WM8904_GPIO1_PU_WIDTH 1 /* GPIO1_PU */ +#define WM8904_GPIO1_PD 0x0010 /* GPIO1_PD */ +#define WM8904_GPIO1_PD_MASK 0x0010 /* GPIO1_PD */ +#define WM8904_GPIO1_PD_SHIFT 4 /* GPIO1_PD */ +#define WM8904_GPIO1_PD_WIDTH 1 /* GPIO1_PD */ +#define WM8904_GPIO1_SEL_MASK 0x000F /* GPIO1_SEL - [3:0] */ +#define WM8904_GPIO1_SEL_SHIFT 0 /* GPIO1_SEL - [3:0] */ +#define WM8904_GPIO1_SEL_WIDTH 4 /* GPIO1_SEL - [3:0] */ + +/* + * R122 (0x7A) - GPIO Control 2 + */ +#define WM8904_GPIO2_PU 0x0020 /* GPIO2_PU */ +#define WM8904_GPIO2_PU_MASK 0x0020 /* GPIO2_PU */ +#define WM8904_GPIO2_PU_SHIFT 5 /* GPIO2_PU */ +#define WM8904_GPIO2_PU_WIDTH 1 /* GPIO2_PU */ +#define WM8904_GPIO2_PD 0x0010 /* GPIO2_PD */ +#define WM8904_GPIO2_PD_MASK 0x0010 /* GPIO2_PD */ +#define WM8904_GPIO2_PD_SHIFT 4 /* GPIO2_PD */ +#define WM8904_GPIO2_PD_WIDTH 1 /* GPIO2_PD */ +#define WM8904_GPIO2_SEL_MASK 0x000F /* GPIO2_SEL - [3:0] */ +#define WM8904_GPIO2_SEL_SHIFT 0 /* GPIO2_SEL - [3:0] */ +#define WM8904_GPIO2_SEL_WIDTH 4 /* GPIO2_SEL - [3:0] */ + +/* + * R123 (0x7B) - GPIO Control 3 + */ +#define WM8904_GPIO3_PU 0x0020 /* GPIO3_PU */ +#define WM8904_GPIO3_PU_MASK 0x0020 /* GPIO3_PU */ +#define WM8904_GPIO3_PU_SHIFT 5 /* GPIO3_PU */ +#define WM8904_GPIO3_PU_WIDTH 1 /* GPIO3_PU */ +#define WM8904_GPIO3_PD 0x0010 /* GPIO3_PD */ +#define WM8904_GPIO3_PD_MASK 0x0010 /* GPIO3_PD */ +#define WM8904_GPIO3_PD_SHIFT 4 /* GPIO3_PD */ +#define WM8904_GPIO3_PD_WIDTH 1 /* GPIO3_PD */ +#define WM8904_GPIO3_SEL_MASK 0x000F /* GPIO3_SEL - [3:0] */ +#define WM8904_GPIO3_SEL_SHIFT 0 /* GPIO3_SEL - [3:0] */ +#define WM8904_GPIO3_SEL_WIDTH 4 /* GPIO3_SEL - [3:0] */ + +/* + * R124 (0x7C) - GPIO Control 4 + */ +#define WM8904_GPI7_ENA 0x0200 /* GPI7_ENA */ +#define WM8904_GPI7_ENA_MASK 0x0200 /* GPI7_ENA */ +#define WM8904_GPI7_ENA_SHIFT 9 /* GPI7_ENA */ +#define WM8904_GPI7_ENA_WIDTH 1 /* GPI7_ENA */ +#define WM8904_GPI8_ENA 0x0100 /* GPI8_ENA */ +#define WM8904_GPI8_ENA_MASK 0x0100 /* GPI8_ENA */ +#define WM8904_GPI8_ENA_SHIFT 8 /* GPI8_ENA */ +#define WM8904_GPI8_ENA_WIDTH 1 /* GPI8_ENA */ +#define WM8904_GPIO_BCLK_MODE_ENA 0x0080 /* GPIO_BCLK_MODE_ENA */ +#define WM8904_GPIO_BCLK_MODE_ENA_MASK 0x0080 /* GPIO_BCLK_MODE_ENA */ +#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT 7 /* GPIO_BCLK_MODE_ENA */ +#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH 1 /* GPIO_BCLK_MODE_ENA */ +#define WM8904_GPIO_BCLK_SEL_MASK 0x000F /* GPIO_BCLK_SEL - [3:0] */ +#define WM8904_GPIO_BCLK_SEL_SHIFT 0 /* GPIO_BCLK_SEL - [3:0] */ +#define WM8904_GPIO_BCLK_SEL_WIDTH 4 /* GPIO_BCLK_SEL - [3:0] */ + +#define WM8904_MIC_REGS 2 +#define WM8904_GPIO_REGS 4 +#define WM8904_DRC_REGS 4 +#define WM8904_EQ_REGS 25 /** * DRC configurations are specified with a label and a set of register @@ -52,6 +155,9 @@ struct wm8904_pdata { int num_retune_mobile_cfgs; struct wm8904_retune_mobile_cfg *retune_mobile_cfgs; + + u32 gpio_cfg[WM8904_GPIO_REGS]; + u32 mic_cfg[WM8904_MIC_REGS]; }; #endif diff --git a/include/sound/wm8960.h b/include/sound/wm8960.h new file mode 100644 index 00000000000..74e9a95529c --- /dev/null +++ b/include/sound/wm8960.h @@ -0,0 +1,24 @@ +/* + * wm8960.h -- WM8960 Soc Audio driver platform data + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8960_PDATA_H +#define _WM8960_PDATA_H + +#define WM8960_DRES_400R 0 +#define WM8960_DRES_200R 1 +#define WM8960_DRES_600R 2 +#define WM8960_DRES_150R 3 +#define WM8960_DRES_MAX 3 + +struct wm8960_data { + bool capless; /* Headphone outputs configured in capless mode */ + + int dres; /* Discharge resistance for headphone outputs */ +}; + +#endif |