diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 395 |
1 files changed, 386 insertions, 9 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e3e19f8b16f..c46bb016f4e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -170,7 +170,8 @@ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP @@ -374,8 +375,8 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * Background scan period can optionally be @@ -512,6 +513,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -586,6 +593,24 @@ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames * for IBSS or MESH vif. * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -736,6 +761,10 @@ enum nl80211_commands { NL80211_CMD_SET_MCAST_RATE, + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -958,7 +987,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. @@ -1310,6 +1339,35 @@ enum nl80211_commands { * if not given in START_AP 0 is assumed, if not given in SET_BSS * no change is made. * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1580,6 +1638,22 @@ enum nl80211_attrs { NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1697,6 +1771,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1708,6 +1785,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1813,6 +1891,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1834,6 +1914,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1858,6 +1942,11 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1967,6 +2056,20 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -1979,6 +2082,12 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2249,6 +2358,34 @@ enum nl80211_mntr_flags { }; /** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** * enum nl80211_meshconf_params - mesh configuration parameters * * Mesh configuration parameters. These can be changed while the mesh is @@ -2342,6 +2479,11 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2371,6 +2513,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2816,10 +2960,12 @@ enum nl80211_tx_power_setting { * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. + * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number */ @@ -2827,6 +2973,7 @@ enum nl80211_wowlan_packet_pattern_attr { __NL80211_WOWLAN_PKTPAT_INVALID, NL80211_WOWLAN_PKTPAT_MASK, NL80211_WOWLAN_PKTPAT_PATTERN, + NL80211_WOWLAN_PKTPAT_OFFSET, NUM_NL80211_WOWLAN_PKTPAT, MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, @@ -2837,6 +2984,7 @@ enum nl80211_wowlan_packet_pattern_attr { * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the @@ -2846,6 +2994,7 @@ struct nl80211_wowlan_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); /** @@ -2861,12 +3010,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2877,8 +3031,36 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2891,6 +3073,14 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -2898,6 +3088,116 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that @@ -2933,6 +3233,8 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -2965,6 +3267,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -3140,6 +3443,19 @@ enum nl80211_ap_sme_features { * setting * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3155,6 +3471,9 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, }; /** @@ -3182,7 +3501,7 @@ enum nl80211_probe_resp_offload_support_attr { * enum nl80211_connect_failed_reason - connection request failed reasons * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be * handled by the AP is reached. - * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. */ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_MAX_CLIENTS, @@ -3210,4 +3529,62 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_AP = 1<<2, }; +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ + +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + #endif /* __LINUX_NL80211_H */ |