diff options
Diffstat (limited to 'include/uapi/linux')
45 files changed, 1428 insertions, 240 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 3ce25b5d75a..6929571b79b 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -139,6 +139,7 @@ header-y += hid.h header-y += hiddev.h header-y += hidraw.h header-y += hpet.h +header-y += hyperv.h header-y += hysdn_if.h header-y += i2c-dev.h header-y += i2c.h diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 2d48fe1274c..11917f747cb 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -70,7 +70,6 @@ #define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ #define AUDIT_SET_FEATURE 1018 /* Turn an audit feature on or off */ #define AUDIT_GET_FEATURE 1019 /* Get which features are enabled */ -#define AUDIT_FEATURE_CHANGE 1020 /* audit log listing feature changes */ #define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ #define AUDIT_USER_AVC 1107 /* We filter this differently */ @@ -109,6 +108,8 @@ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ #define AUDIT_SECCOMP 1326 /* Secure Computing event */ +#define AUDIT_PROCTITLE 1327 /* Proctitle emit event */ +#define AUDIT_FEATURE_CHANGE 1328 /* audit log listing feature changes */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index e52958d7c2d..5d9d1d14071 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -8,6 +8,38 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ #ifndef CAN_H diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index df944ed206a..7e2e1863db1 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -96,6 +96,7 @@ struct can_ctrlmode { #define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ #define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ #define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ /* * CAN device statistics @@ -122,6 +123,8 @@ enum { IFLA_CAN_RESTART_MS, IFLA_CAN_RESTART, IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, __IFLA_CAN_MAX }; diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index ba478fa3012..154dd6d3c8f 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -308,8 +308,12 @@ struct vfs_cap_data { #define CAP_LEASE 28 +/* Allow writing the audit log via unicast netlink socket */ + #define CAP_AUDIT_WRITE 29 +/* Allow configuration of audit via unicast netlink socket */ + #define CAP_AUDIT_CONTROL 30 #define CAP_SETFCAP 31 diff --git a/include/uapi/linux/capi.h b/include/uapi/linux/capi.h index 65100d6cb89..7b145fd7afb 100644 --- a/include/uapi/linux/capi.h +++ b/include/uapi/linux/capi.h @@ -102,7 +102,7 @@ typedef struct capi_manufacturer_cmd { /* * member contr is input for - * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL + * CAPI_GET_MANUFACTURER, CAPI_GET_VERSION, CAPI_GET_SERIAL * and CAPI_GET_PROFILE */ typedef union capi_ioctl_struct { diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 38dbafaa534..fd161e91b6d 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -16,37 +16,97 @@ #include <linux/types.h> #include <linux/if_ether.h> -/* This should work for both 32 and 64 bit userland. */ +/* All structures exposed to userland should be defined such that they + * have the same layout for 32-bit and 64-bit userland. + */ + +/** + * struct ethtool_cmd - link control and status + * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET + * @supported: Bitmask of %SUPPORTED_* flags for the link modes, + * physical connectors and other link features for which the + * interface supports autonegotiation or auto-detection. + * Read-only. + * @advertising: Bitmask of %ADVERTISED_* flags for the link modes, + * physical connectors and other link features that are + * advertised through autonegotiation or enabled for + * auto-detection. + * @speed: Low bits of the speed + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @transceiver: Historically used to distinguish different possible + * PHY types, but not in a consistent way. Deprecated. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @maxtxpkt: Historically used to report TX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @maxrxpkt: Historically used to report RX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @speed_hi: High bits of the speed + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes + * and other link features that the link partner advertised + * through autonegotiation; 0 if unknown or not applicable. + * Read-only. + * + * The link speed in Mbps is split between @speed and @speed_hi. Use + * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to + * access it. + * + * If autonegotiation is disabled, the speed and @duplex represent the + * fixed link mode and are writable if the driver supports multiple + * link modes. If it is enabled then they are read-only; if the link + * is up they represent the negotiated link mode; if the link is down, + * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and + * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. + * + * Some hardware interfaces may have multiple PHYs and/or physical + * connectors fitted or do not allow the driver to detect which are + * fitted. For these interfaces @port and/or @phy_address may be + * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. + * Otherwise, attempts to write different values may be ignored or + * rejected. + * + * Users should assume that all fields not marked read-only are + * writable and subject to validation by the driver. They should use + * %ETHTOOL_GSET to get the current values before making specific + * changes and then applying them with %ETHTOOL_SSET. + * + * Drivers that implement set_settings() should validate all fields + * other than @cmd that are not described as read-only or deprecated, + * and must ignore all fields described as read-only. + * + * Deprecated fields should be ignored by both users and drivers. + */ struct ethtool_cmd { __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ + __u32 supported; + __u32 advertising; + __u16 speed; + __u8 duplex; + __u8 port; + __u8 phy_address; + __u8 transceiver; + __u8 autoneg; + __u8 mdio_support; + __u32 maxtxpkt; + __u32 maxrxpkt; + __u16 speed_hi; + __u8 eth_tp_mdix; + __u8 eth_tp_mdix_ctrl; + __u32 lp_advertising; __u32 reserved[2]; }; @@ -79,37 +139,68 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) #define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ + +/** + * struct ethtool_drvinfo - general driver and device information + * @cmd: Command number = %ETHTOOL_GDRVINFO + * @driver: Driver short name. This should normally match the name + * in its bus driver structure (e.g. pci_driver::name). Must + * not be an empty string. + * @version: Driver version string; may be an empty string + * @fw_version: Firmware version string; may be an empty string + * @bus_info: Device bus address. This should match the dev_name() + * string for the underlying bus device, if there is one. May be + * an empty string. + * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and + * %ETHTOOL_SPFLAGS commands; also the number of strings in the + * %ETH_SS_PRIV_FLAGS set + * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS + * command; also the number of strings in the %ETH_SS_STATS set + * @testinfo_len: Number of results returned by the %ETHTOOL_TEST + * command; also the number of strings in the %ETH_SS_TEST set + * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM + * and %ETHTOOL_SEEPROM commands, in bytes + * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS + * command, in bytes + * + * Users can use the %ETHTOOL_GSSET_INFO command to get the number of + * strings in any string set (from Linux 2.6.34). + * + * Drivers should set at most @driver, @version, @fw_version and + * @bus_info in their get_drvinfo() implementation. The ethtool + * core fills in the other fields using other driver operations. + */ struct ethtool_drvinfo { __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ + char driver[32]; + char version[32]; + char fw_version[ETHTOOL_FWVERS_LEN]; + char bus_info[ETHTOOL_BUSINFO_LEN]; char reserved1[32]; char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 n_priv_flags; + __u32 n_stats; __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ + __u32 eedump_len; + __u32 regdump_len; }; #define SOPASS_MAX 6 -/* wake-on-lan settings */ + +/** + * struct ethtool_wolinfo - Wake-On-Lan configuration + * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL + * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes. + * Read-only. + * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes. + * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE + * is set in @wolopts. + */ struct ethtool_wolinfo { __u32 cmd; __u32 supported; __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ + __u8 sopass[SOPASS_MAX]; }; /* for passing single values */ @@ -118,20 +209,51 @@ struct ethtool_value { __u32 data; }; -/* for passing big chunks of data */ +/** + * struct ethtool_regs - hardware register dump + * @cmd: Command number = %ETHTOOL_GREGS + * @version: Dump format version. This is driver-specific and may + * distinguish different chips/revisions. Drivers must use new + * version numbers whenever the dump format changes in an + * incompatible way. + * @len: On entry, the real length of @data. On return, the number of + * bytes used. + * @data: Buffer for the register dump + * + * Users should use %ETHTOOL_GDRVINFO to find the maximum length of + * a register dump for the interface. They must allocate the buffer + * immediately following this structure. + */ struct ethtool_regs { __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ + __u32 version; + __u32 len; __u8 data[0]; }; -/* for passing EEPROM chunks */ +/** + * struct ethtool_eeprom - EEPROM dump + * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or + * %ETHTOOL_SEEPROM + * @magic: A 'magic cookie' value to guard against accidental changes. + * The value passed in to %ETHTOOL_SEEPROM must match the value + * returned by %ETHTOOL_GEEPROM for the same device. This is + * unused when @cmd is %ETHTOOL_GMODULEEEPROM. + * @offset: Offset within the EEPROM to begin reading/writing, in bytes + * @len: On entry, number of bytes to read/write. On successful + * return, number of bytes actually read/written. In case of + * error, this may indicate at what point the error occurred. + * @data: Buffer to read/write from + * + * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find + * the length of an on-board or module EEPROM, respectively. They + * must allocate the buffer immediately following this structure. + */ struct ethtool_eeprom { __u32 cmd; __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ + __u32 offset; + __u32 len; __u8 data[0]; }; @@ -229,17 +351,18 @@ struct ethtool_modinfo { * @rate_sample_interval: How often to do adaptive coalescing packet rate * sampling, measured in seconds. Must not be zero. * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: + * Each pair of (usecs, max_frames) fields specifies that interrupts + * should be coalesced until * (usecs > 0 && time_since_first_completion >= usecs) || * (max_frames > 0 && completed_frames >= max_frames) + * * It is illegal to set both usecs and max_frames to zero as this * would cause interrupts to never be generated. To disable * coalescing, set usecs = 0 and max_frames = 1. * * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs + * condition time_since_first_completion >= usecs + * * This is deprecated. Drivers for hardware that does not support * counting completions should validate that max_frames == !rx_usecs. * @@ -279,22 +402,37 @@ struct ethtool_coalesce { __u32 rate_sample_interval; }; -/* for configuring RX/TX ring parameters */ +/** + * struct ethtool_ringparam - RX/TX ring parameters + * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM + * @rx_max_pending: Maximum supported number of pending entries per + * RX ring. Read-only. + * @rx_mini_max_pending: Maximum supported number of pending entries + * per RX mini ring. Read-only. + * @rx_jumbo_max_pending: Maximum supported number of pending entries + * per RX jumbo ring. Read-only. + * @tx_max_pending: Maximum supported number of pending entries per + * TX ring. Read-only. + * @rx_pending: Current maximum number of pending entries per RX ring + * @rx_mini_pending: Current maximum number of pending entries per RX + * mini ring + * @rx_jumbo_pending: Current maximum number of pending entries per RX + * jumbo ring + * @tx_pending: Current maximum supported number of pending entries + * per TX ring + * + * If the interface does not have separate RX mini and/or jumbo rings, + * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0. + * + * There may also be driver-dependent minimum values for the number + * of entries per ring. + */ struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ + __u32 cmd; __u32 rx_max_pending; __u32 rx_mini_max_pending; __u32 rx_jumbo_max_pending; __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ __u32 rx_pending; __u32 rx_mini_pending; __u32 rx_jumbo_pending; @@ -329,51 +467,96 @@ struct ethtool_channels { __u32 combined_count; }; -/* for configuring link flow control parameters */ +/** + * struct ethtool_pauseparam - Ethernet pause (flow control) parameters + * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM + * @autoneg: Flag to enable autonegotiation of pause frame use + * @rx_pause: Flag to enable reception of pause frames + * @tx_pause: Flag to enable transmission of pause frames + * + * Drivers should reject a non-zero setting of @autoneg when + * autoneogotiation is disabled (or not supported) for the link. + * + * If the link is autonegotiated, drivers should use + * mii_advertise_flowctrl() or similar code to set the advertised + * pause frame capabilities based on the @rx_pause and @tx_pause flags, + * even if @autoneg is zero. They should also allow the advertised + * pause frame capabilities to be controlled directly through the + * advertising field of &struct ethtool_cmd. + * + * If @autoneg is non-zero, the MAC is configured to send and/or + * receive pause frames according to the result of autonegotiation. + * Otherwise, it is configured directly based on the @rx_pause and + * @tx_pause flags. + */ struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ + __u32 cmd; __u32 autoneg; __u32 rx_pause; __u32 tx_pause; }; #define ETH_GSTRING_LEN 32 + +/** + * enum ethtool_stringset - string set ID + * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST + * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS + * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with + * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS + * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE; + * now deprecated + * @ETH_SS_FEATURES: Device feature names + */ enum ethtool_stringset { ETH_SS_TEST = 0, ETH_SS_STATS, ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ + ETH_SS_NTUPLE_FILTERS, ETH_SS_FEATURES, }; -/* for passing string sets for data tagging */ +/** + * struct ethtool_gstrings - string set for data tagging + * @cmd: Command number = %ETHTOOL_GSTRINGS + * @string_set: String set ID; one of &enum ethtool_stringset + * @len: On return, the number of strings in the string set + * @data: Buffer for strings. Each string is null-padded to a size of + * %ETH_GSTRING_LEN. + * + * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in + * the string set. They must allocate a buffer of the appropriate + * size immediately following this structure. + */ struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ + __u32 cmd; + __u32 string_set; + __u32 len; __u8 data[0]; }; +/** + * struct ethtool_sset_info - string set information + * @cmd: Command number = %ETHTOOL_GSSET_INFO + * @sset_mask: On entry, a bitmask of string sets to query, with bits + * numbered according to &enum ethtool_stringset. On return, a + * bitmask of those string sets queried that are supported. + * @data: Buffer for string set sizes. On return, this contains the + * size of each string set that was queried and supported, in + * order of ID. + * + * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on + * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the + * size of set 1 and @data[1] contains the size of set 2. + * + * Users must allocate a buffer of the appropriate size (4 * number of + * sets queried) immediately following this structure. + */ struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 cmd; __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ + __u64 sset_mask; + __u32 data[0]; }; /** @@ -393,24 +576,58 @@ enum ethtool_test_flags { ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), }; -/* for requesting NIC test and getting results*/ +/** + * struct ethtool_test - device self-test invocation + * @cmd: Command number = %ETHTOOL_TEST + * @flags: A bitmask of flags from &enum ethtool_test_flags. Some + * flags may be set by the user on entry; others may be set by + * the driver on return. + * @len: On return, the number of test results + * @data: Array of test results + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of test results that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of results) immediately + * following this structure. + */ struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 cmd; + __u32 flags; __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ + __u32 len; __u64 data[0]; }; -/* for dumping NIC-specific statistics */ +/** + * struct ethtool_stats - device-specific statistics + * @cmd: Command number = %ETHTOOL_GSTATS + * @n_stats: On return, the number of statistics + * @data: Array of statistics + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of statistics that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of statistics) + * immediately following this structure. + */ struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ + __u32 cmd; + __u32 n_stats; __u64 data[0]; }; +/** + * struct ethtool_perm_addr - permanent hardware address + * @cmd: Command number = %ETHTOOL_GPERMADDR + * @size: On entry, the size of the buffer. On return, the size of the + * address. The command fails if the buffer is too small. + * @data: Buffer for the address + * + * Users must allocate the buffer immediately following this structure. + * A buffer size of %MAX_ADDR_LEN should be sufficient for any address + * type. + */ struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 cmd; __u32 size; __u8 data[0]; }; @@ -593,7 +810,7 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused * location, and may remove a rule at a later location (lower * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; + * values are %RX_CLS_LOC_ANY, selecting any location; * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum * priority); and %RX_CLS_LOC_LAST, selecting the last suitable * location (minimum priority). Additional special values may be @@ -704,9 +921,6 @@ struct ethtool_flash { * for %ETHTOOL_GET_DUMP_FLAG command * @data: data collected for get dump data operation */ - -#define ETH_FW_DUMP_DISABLE 0 - struct ethtool_dump { __u32 cmd; __u32 version; @@ -715,6 +929,8 @@ struct ethtool_dump { __u8 data[0]; }; +#define ETH_FW_DUMP_DISABLE 0 + /* for returning and changing feature sets */ /** @@ -734,8 +950,9 @@ struct ethtool_get_features_block { /** * struct ethtool_gfeatures - command to get state of device's features * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features + * @size: On entry, the number of elements in the features[] array; + * on return, the number of elements in features[] needed to hold + * all features * @features: state of features */ struct ethtool_gfeatures { @@ -905,7 +1122,6 @@ enum ethtool_sfeatures_retval_bits { #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -/* Indicates what features are supported by the interface. */ #define SUPPORTED_10baseT_Half (1 << 0) #define SUPPORTED_10baseT_Full (1 << 1) #define SUPPORTED_100baseT_Half (1 << 2) @@ -934,7 +1150,6 @@ enum ethtool_sfeatures_retval_bits { #define SUPPORTED_40000baseSR4_Full (1 << 25) #define SUPPORTED_40000baseLR4_Full (1 << 26) -/* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) #define ADVERTISED_10baseT_Full (1 << 1) #define ADVERTISED_100baseT_Half (1 << 2) @@ -999,9 +1214,7 @@ enum ethtool_sfeatures_retval_bits { #define XCVR_DUMMY2 0x03 #define XCVR_DUMMY3 0x04 -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ +/* Enable or disable autonegotiation. */ #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h index 990c4ccf8b6..d1197ae3723 100644 --- a/include/uapi/linux/falloc.h +++ b/include/uapi/linux/falloc.h @@ -5,5 +5,40 @@ #define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ #define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ +/* + * FALLOC_FL_COLLAPSE_RANGE is used to remove a range of a file + * without leaving a hole in the file. The contents of the file beyond + * the range being removed is appended to the start offset of the range + * being removed (i.e. the hole that was punched is "collapsed"), + * resulting in a file layout that looks like the range that was + * removed never existed. As such collapsing a range of a file changes + * the size of the file, reducing it by the same length of the range + * that has been removed by the operation. + * + * Different filesystems may implement different limitations on the + * granularity of the operation. Most will limit operations to + * filesystem block size boundaries, but this boundary may be larger or + * smaller depending on the filesystem and/or the configuration of the + * filesystem or file. + * + * Attempting to collapse a range that crosses the end of the file is + * considered an illegal operation - just use ftruncate(2) if you need + * to collapse a range that crosses EOF. + */ +#define FALLOC_FL_COLLAPSE_RANGE 0x08 + +/* + * FALLOC_FL_ZERO_RANGE is used to convert a range of file to zeros preferably + * without issuing data IO. Blocks should be preallocated for the regions that + * span holes in the file, and the entire range is preferable converted to + * unwritten extents - even though file system may choose to zero out the + * extent or do whatever which will result in reading zeros from the range + * while the range remains allocated for the file. + * + * This can be also used to preallocate blocks past EOF in the same way as + * with fallocate. Flag FALLOC_FL_KEEP_SIZE should cause the inode + * size to remain the same. + */ +#define FALLOC_FL_ZERO_RANGE 0x10 #endif /* _UAPI_FALLOC_H_ */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 6c28b61bb69..ca1a11bb444 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -35,6 +35,9 @@ #define SEEK_HOLE 4 /* seek to the next hole */ #define SEEK_MAX SEEK_HOLE +#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ +#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ + struct fstrim_range { __u64 start; __u64 len; diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 60bb2f9f7b7..cf4750e1bb4 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -93,6 +93,9 @@ * * 7.22 * - add FUSE_ASYNC_DIO + * + * 7.23 + * - add FUSE_WRITEBACK_CACHE */ #ifndef _LINUX_FUSE_H @@ -128,7 +131,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 22 +#define FUSE_KERNEL_MINOR_VERSION 23 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -219,6 +222,7 @@ struct fuse_file_lock { * FUSE_DO_READDIRPLUS: do READDIRPLUS (READDIR+LOOKUP in one) * FUSE_READDIRPLUS_AUTO: adaptive readdirplus * FUSE_ASYNC_DIO: asynchronous direct I/O submission + * FUSE_WRITEBACK_CACHE: use writeback cache for buffered writes */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -236,6 +240,7 @@ struct fuse_file_lock { #define FUSE_DO_READDIRPLUS (1 << 13) #define FUSE_READDIRPLUS_AUTO (1 << 14) #define FUSE_ASYNC_DIO (1 << 15) +#define FUSE_WRITEBACK_CACHE (1 << 16) /** * CUSE INIT request/reply flags diff --git a/include/uapi/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h index 0f24c07aed5..db3fdd08388 100644 --- a/include/uapi/linux/gfs2_ondisk.h +++ b/include/uapi/linux/gfs2_ondisk.h @@ -304,7 +304,13 @@ struct gfs2_dirent { __be16 de_rec_len; __be16 de_name_len; __be16 de_type; - __u8 __pad[14]; + union { + __u8 __pad[14]; + struct { + __be16 de_rahead; + __u8 pad2[12]; + }; + }; }; /* @@ -347,9 +353,9 @@ struct gfs2_leaf { * metadata header. Each inode, if it has extended attributes, will * have either a single block containing the extended attribute headers * or a single indirect block pointing to blocks containing the - * extended attribure headers. + * extended attribute headers. * - * The maximim size of the data part of an extended attribute is 64k + * The maximum size of the data part of an extended attribute is 64k * so the number of blocks required depends upon block size. Since the * block size also determines the number of pointers in an indirect * block, its a fairly complicated calculation to work out the maximum diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h new file mode 100644 index 00000000000..78e4a86030d --- /dev/null +++ b/include/uapi/linux/hyperv.h @@ -0,0 +1,391 @@ +/* + * + * Copyright (c) 2011, Microsoft Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Authors: + * Haiyang Zhang <haiyangz@microsoft.com> + * Hank Janssen <hjanssen@microsoft.com> + * K. Y. Srinivasan <kys@microsoft.com> + * + */ + +#ifndef _UAPI_HYPERV_H +#define _UAPI_HYPERV_H + +#include <linux/uuid.h> + +/* + * Framework version for util services. + */ +#define UTIL_FW_MINOR 0 + +#define UTIL_WS2K8_FW_MAJOR 1 +#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR) + +#define UTIL_FW_MAJOR 3 +#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR) + + +/* + * Implementation of host controlled snapshot of the guest. + */ + +#define VSS_OP_REGISTER 128 + +enum hv_vss_op { + VSS_OP_CREATE = 0, + VSS_OP_DELETE, + VSS_OP_HOT_BACKUP, + VSS_OP_GET_DM_INFO, + VSS_OP_BU_COMPLETE, + /* + * Following operations are only supported with IC version >= 5.0 + */ + VSS_OP_FREEZE, /* Freeze the file systems in the VM */ + VSS_OP_THAW, /* Unfreeze the file systems */ + VSS_OP_AUTO_RECOVER, + VSS_OP_COUNT /* Number of operations, must be last */ +}; + + +/* + * Header for all VSS messages. + */ +struct hv_vss_hdr { + __u8 operation; + __u8 reserved[7]; +} __attribute__((packed)); + + +/* + * Flag values for the hv_vss_check_feature. Linux supports only + * one value. + */ +#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005 + +struct hv_vss_check_feature { + __u32 flags; +} __attribute__((packed)); + +struct hv_vss_check_dm_info { + __u32 flags; +} __attribute__((packed)); + +struct hv_vss_msg { + union { + struct hv_vss_hdr vss_hdr; + int error; + }; + union { + struct hv_vss_check_feature vss_cf; + struct hv_vss_check_dm_info dm_info; + }; +} __attribute__((packed)); + +/* + * Implementation of a host to guest copy facility. + */ + +#define FCOPY_VERSION_0 0 +#define FCOPY_CURRENT_VERSION FCOPY_VERSION_0 +#define W_MAX_PATH 260 + +enum hv_fcopy_op { + START_FILE_COPY = 0, + WRITE_TO_FILE, + COMPLETE_FCOPY, + CANCEL_FCOPY, +}; + +struct hv_fcopy_hdr { + __u32 operation; + uuid_le service_id0; /* currently unused */ + uuid_le service_id1; /* currently unused */ +} __attribute__((packed)); + +#define OVER_WRITE 0x1 +#define CREATE_PATH 0x2 + +struct hv_start_fcopy { + struct hv_fcopy_hdr hdr; + __u16 file_name[W_MAX_PATH]; + __u16 path_name[W_MAX_PATH]; + __u32 copy_flags; + __u64 file_size; +} __attribute__((packed)); + +/* + * The file is chunked into fragments. + */ +#define DATA_FRAGMENT (6 * 1024) + +struct hv_do_fcopy { + struct hv_fcopy_hdr hdr; + __u64 offset; + __u32 size; + __u8 data[DATA_FRAGMENT]; +}; + +/* + * An implementation of HyperV key value pair (KVP) functionality for Linux. + * + * + * Copyright (C) 2010, Novell, Inc. + * Author : K. Y. Srinivasan <ksrinivasan@novell.com> + * + */ + +/* + * Maximum value size - used for both key names and value data, and includes + * any applicable NULL terminators. + * + * Note: This limit is somewhat arbitrary, but falls easily within what is + * supported for all native guests (back to Win 2000) and what is reasonable + * for the IC KVP exchange functionality. Note that Windows Me/98/95 are + * limited to 255 character key names. + * + * MSDN recommends not storing data values larger than 2048 bytes in the + * registry. + * + * Note: This value is used in defining the KVP exchange message - this value + * cannot be modified without affecting the message size and compatibility. + */ + +/* + * bytes, including any null terminators + */ +#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048) + + +/* + * Maximum key size - the registry limit for the length of an entry name + * is 256 characters, including the null terminator + */ + +#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512) + +/* + * In Linux, we implement the KVP functionality in two components: + * 1) The kernel component which is packaged as part of the hv_utils driver + * is responsible for communicating with the host and responsible for + * implementing the host/guest protocol. 2) A user level daemon that is + * responsible for data gathering. + * + * Host/Guest Protocol: The host iterates over an index and expects the guest + * to assign a key name to the index and also return the value corresponding to + * the key. The host will have atmost one KVP transaction outstanding at any + * given point in time. The host side iteration stops when the guest returns + * an error. Microsoft has specified the following mapping of key names to + * host specified index: + * + * Index Key Name + * 0 FullyQualifiedDomainName + * 1 IntegrationServicesVersion + * 2 NetworkAddressIPv4 + * 3 NetworkAddressIPv6 + * 4 OSBuildNumber + * 5 OSName + * 6 OSMajorVersion + * 7 OSMinorVersion + * 8 OSVersion + * 9 ProcessorArchitecture + * + * The Windows host expects the Key Name and Key Value to be encoded in utf16. + * + * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the + * data gathering functionality in a user mode daemon. The user level daemon + * is also responsible for binding the key name to the index as well. The + * kernel and user-level daemon communicate using a connector channel. + * + * The user mode component first registers with the + * the kernel component. Subsequently, the kernel component requests, data + * for the specified keys. In response to this message the user mode component + * fills in the value corresponding to the specified key. We overload the + * sequence field in the cn_msg header to define our KVP message types. + * + * + * The kernel component simply acts as a conduit for communication between the + * Windows host and the user-level daemon. The kernel component passes up the + * index received from the Host to the user-level daemon. If the index is + * valid (supported), the corresponding key as well as its + * value (both are strings) is returned. If the index is invalid + * (not supported), a NULL key string is returned. + */ + + +/* + * Registry value types. + */ + +#define REG_SZ 1 +#define REG_U32 4 +#define REG_U64 8 + +/* + * As we look at expanding the KVP functionality to include + * IP injection functionality, we need to maintain binary + * compatibility with older daemons. + * + * The KVP opcodes are defined by the host and it was unfortunate + * that I chose to treat the registration operation as part of the + * KVP operations defined by the host. + * Here is the level of compatibility + * (between the user level daemon and the kernel KVP driver) that we + * will implement: + * + * An older daemon will always be supported on a newer driver. + * A given user level daemon will require a minimal version of the + * kernel driver. + * If we cannot handle the version differences, we will fail gracefully + * (this can happen when we have a user level daemon that is more + * advanced than the KVP driver. + * + * We will use values used in this handshake for determining if we have + * workable user level daemon and the kernel driver. We begin by taking the + * registration opcode out of the KVP opcode namespace. We will however, + * maintain compatibility with the existing user-level daemon code. + */ + +/* + * Daemon code not supporting IP injection (legacy daemon). + */ + +#define KVP_OP_REGISTER 4 + +/* + * Daemon code supporting IP injection. + * The KVP opcode field is used to communicate the + * registration information; so define a namespace that + * will be distinct from the host defined KVP opcode. + */ + +#define KVP_OP_REGISTER1 100 + +enum hv_kvp_exchg_op { + KVP_OP_GET = 0, + KVP_OP_SET, + KVP_OP_DELETE, + KVP_OP_ENUMERATE, + KVP_OP_GET_IP_INFO, + KVP_OP_SET_IP_INFO, + KVP_OP_COUNT /* Number of operations, must be last. */ +}; + +enum hv_kvp_exchg_pool { + KVP_POOL_EXTERNAL = 0, + KVP_POOL_GUEST, + KVP_POOL_AUTO, + KVP_POOL_AUTO_EXTERNAL, + KVP_POOL_AUTO_INTERNAL, + KVP_POOL_COUNT /* Number of pools, must be last. */ +}; + +/* + * Some Hyper-V status codes. + */ + +#define HV_S_OK 0x00000000 +#define HV_E_FAIL 0x80004005 +#define HV_S_CONT 0x80070103 +#define HV_ERROR_NOT_SUPPORTED 0x80070032 +#define HV_ERROR_MACHINE_LOCKED 0x800704F7 +#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F +#define HV_INVALIDARG 0x80070057 +#define HV_GUID_NOTFOUND 0x80041002 +#define HV_ERROR_ALREADY_EXISTS 0x80070050 + +#define ADDR_FAMILY_NONE 0x00 +#define ADDR_FAMILY_IPV4 0x01 +#define ADDR_FAMILY_IPV6 0x02 + +#define MAX_ADAPTER_ID_SIZE 128 +#define MAX_IP_ADDR_SIZE 1024 +#define MAX_GATEWAY_SIZE 512 + + +struct hv_kvp_ipaddr_value { + __u16 adapter_id[MAX_ADAPTER_ID_SIZE]; + __u8 addr_family; + __u8 dhcp_enabled; + __u16 ip_addr[MAX_IP_ADDR_SIZE]; + __u16 sub_net[MAX_IP_ADDR_SIZE]; + __u16 gate_way[MAX_GATEWAY_SIZE]; + __u16 dns_addr[MAX_IP_ADDR_SIZE]; +} __attribute__((packed)); + + +struct hv_kvp_hdr { + __u8 operation; + __u8 pool; + __u16 pad; +} __attribute__((packed)); + +struct hv_kvp_exchg_msg_value { + __u32 value_type; + __u32 key_size; + __u32 value_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + union { + __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; + __u32 value_u32; + __u64 value_u64; + }; +} __attribute__((packed)); + +struct hv_kvp_msg_enumerate { + __u32 index; + struct hv_kvp_exchg_msg_value data; +} __attribute__((packed)); + +struct hv_kvp_msg_get { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_set { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_delete { + __u32 key_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + +struct hv_kvp_register { + __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + +struct hv_kvp_msg { + union { + struct hv_kvp_hdr kvp_hdr; + int error; + }; + union { + struct hv_kvp_msg_get kvp_get; + struct hv_kvp_msg_set kvp_set; + struct hv_kvp_msg_delete kvp_delete; + struct hv_kvp_msg_enumerate kvp_enum_data; + struct hv_kvp_ipaddr_value kvp_ip_val; + struct hv_kvp_register kvp_register; + } body; +} __attribute__((packed)); + +struct hv_kvp_ip_msg { + __u8 operation; + __u8 pool; + struct hv_kvp_ipaddr_value kvp_ip_val; +} __attribute__((packed)); + +#endif /* _UAPI_HYPERV_H */ diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index d758163b0e4..9cf2394f0bc 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -27,65 +27,91 @@ #define IFALIASZ 256 #include <linux/hdlc/ioctl.h> -/* Standard interface flags (netdevice->flags). */ -#define IFF_UP 0x1 /* interface is up */ -#define IFF_BROADCAST 0x2 /* broadcast address valid */ -#define IFF_DEBUG 0x4 /* turn on debugging */ -#define IFF_LOOPBACK 0x8 /* is a loopback net */ -#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ -#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ -#define IFF_NOARP 0x80 /* no ARP protocol */ -#define IFF_PROMISC 0x100 /* receive all packets */ -#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ - -#define IFF_MASTER 0x400 /* master of a load balancer */ -#define IFF_SLAVE 0x800 /* slave of a load balancer */ - -#define IFF_MULTICAST 0x1000 /* Supports multicast */ - -#define IFF_PORTSEL 0x2000 /* can set media type */ -#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ - -#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ -#define IFF_DORMANT 0x20000 /* driver signals dormant */ +/** + * enum net_device_flags - &struct net_device flags + * + * These are the &struct net_device flags, they can be set by drivers, the + * kernel and some can be triggered by userspace. Userspace can query and + * set these flags using userspace utilities but there is also a sysfs + * entry available for all dev flags which can be queried and set. These flags + * are shared for all types of net_devices. The sysfs entries are available + * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs + * are annotated below, note that only a few flags can be toggled and some + * other flags are always always preserved from the original net_device flags + * even if you try to set them via sysfs. Flags which are always preserved + * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile + * are annotated below as such. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_UP: interface is up. Can be toggled through sysfs. + * @IFF_BROADCAST: broadcast address valid. Volatile. + * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs. + * @IFF_LOOPBACK: is a loopback net. Volatile. + * @IFF_POINTOPOINT: interface is has p-p link. Volatile. + * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs. + * Volatile. + * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile. + * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile. + * @IFF_PROMISC: receive all packets. Can be toggled through sysfs. + * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through + * sysfs. + * @IFF_MASTER: master of a load balancer. Volatile. + * @IFF_SLAVE: slave of a load balancer. Volatile. + * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs. + * @IFF_PORTSEL: can set media type. Can be toggled through sysfs. + * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs. + * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled + * through sysfs. + * @IFF_LOWER_UP: driver signals L1 up. Volatile. + * @IFF_DORMANT: driver signals dormant. Volatile. + * @IFF_ECHO: echo sent packets. Volatile. + */ +enum net_device_flags { + IFF_UP = 1<<0, /* sysfs */ + IFF_BROADCAST = 1<<1, /* volatile */ + IFF_DEBUG = 1<<2, /* sysfs */ + IFF_LOOPBACK = 1<<3, /* volatile */ + IFF_POINTOPOINT = 1<<4, /* volatile */ + IFF_NOTRAILERS = 1<<5, /* sysfs */ + IFF_RUNNING = 1<<6, /* volatile */ + IFF_NOARP = 1<<7, /* sysfs */ + IFF_PROMISC = 1<<8, /* sysfs */ + IFF_ALLMULTI = 1<<9, /* sysfs */ + IFF_MASTER = 1<<10, /* volatile */ + IFF_SLAVE = 1<<11, /* volatile */ + IFF_MULTICAST = 1<<12, /* sysfs */ + IFF_PORTSEL = 1<<13, /* sysfs */ + IFF_AUTOMEDIA = 1<<14, /* sysfs */ + IFF_DYNAMIC = 1<<15, /* sysfs */ + IFF_LOWER_UP = 1<<16, /* volatile */ + IFF_DORMANT = 1<<17, /* volatile */ + IFF_ECHO = 1<<18, /* volatile */ +}; -#define IFF_ECHO 0x40000 /* echo sent packets */ +#define IFF_UP IFF_UP +#define IFF_BROADCAST IFF_BROADCAST +#define IFF_DEBUG IFF_DEBUG +#define IFF_LOOPBACK IFF_LOOPBACK +#define IFF_POINTOPOINT IFF_POINTOPOINT +#define IFF_NOTRAILERS IFF_NOTRAILERS +#define IFF_RUNNING IFF_RUNNING +#define IFF_NOARP IFF_NOARP +#define IFF_PROMISC IFF_PROMISC +#define IFF_ALLMULTI IFF_ALLMULTI +#define IFF_MASTER IFF_MASTER +#define IFF_SLAVE IFF_SLAVE +#define IFF_MULTICAST IFF_MULTICAST +#define IFF_PORTSEL IFF_PORTSEL +#define IFF_AUTOMEDIA IFF_AUTOMEDIA +#define IFF_DYNAMIC IFF_DYNAMIC +#define IFF_LOWER_UP IFF_LOWER_UP +#define IFF_DORMANT IFF_DORMANT +#define IFF_ECHO IFF_ECHO #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) -/* Private (from user) interface flags (netdevice->priv_flags). */ -#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ -#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ -#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */ -#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */ -#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */ -#define IFF_BONDING 0x20 /* bonding master or slave */ -#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ -#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ -#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ -#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ -#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to - * release skb->dst - */ -#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ -#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */ -#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */ -#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */ -#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch - * datapath port */ -#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing - * skbs on transmit */ -#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ -#define IFF_TEAM_PORT 0x40000 /* device used as team port */ -#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ -#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address - * change when it's running */ -#define IFF_MACVLAN 0x200000 /* Macvlan device */ - - #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 2ce0f6a78fa..0f8210b8e0b 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -68,11 +68,11 @@ #define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ #define ETH_P_WCCP 0x883E /* Web-cache coordination protocol * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ #define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ #define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet @@ -89,6 +89,8 @@ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 16410b6e781..9a7f7ace664 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -144,6 +144,7 @@ enum { IFLA_NUM_RX_QUEUES, IFLA_CARRIER, IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, __IFLA_MAX }; diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 393c5de09d4..c33a65e3d62 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -120,6 +120,10 @@ struct in_addr { * this socket to prevent accepting spoofed ones. */ #define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get + * fragmented if they exeed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 #define IP_MULTICAST_IF 32 #define IP_MULTICAST_TTL 33 diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index e9a1d2d973b..0d8e0f0342d 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -185,6 +185,10 @@ struct in6_flowlabel_req { * also see comments on IP_PMTUDISC_INTERFACE */ #define IPV6_PMTUDISC_INTERFACE 4 +/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to + * get fragmented if they exceed the interface mtu + */ +#define IPV6_PMTUDISC_OMIT 5 /* Flowlabel */ #define IPV6_FLOWLABEL_MGR 32 diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 932d7f2637d..a8f4ee5d2e8 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -413,6 +413,8 @@ struct kvm_s390_psw { #define KVM_S390_PROGRAM_INT 0xfffe0001u #define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u #define KVM_S390_RESTART 0xfffe0003u +#define KVM_S390_INT_PFAULT_INIT 0xfffe0004u +#define KVM_S390_INT_PFAULT_DONE 0xfffe0005u #define KVM_S390_MCHK 0xfffe1000u #define KVM_S390_INT_VIRTIO 0xffff2603u #define KVM_S390_INT_SERVICE 0xffff2401u @@ -434,6 +436,69 @@ struct kvm_s390_interrupt { __u64 parm64; }; +struct kvm_s390_io_info { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; +}; + +struct kvm_s390_ext_info { + __u32 ext_params; + __u32 pad; + __u64 ext_params2; +}; + +struct kvm_s390_pgm_info { + __u64 trans_exc_code; + __u64 mon_code; + __u64 per_address; + __u32 data_exc_code; + __u16 code; + __u16 mon_class_nr; + __u8 per_code; + __u8 per_atmid; + __u8 exc_access_id; + __u8 per_access_id; + __u8 op_access_id; + __u8 pad[3]; +}; + +struct kvm_s390_prefix_info { + __u32 address; +}; + +struct kvm_s390_extcall_info { + __u16 code; +}; + +struct kvm_s390_emerg_info { + __u16 code; +}; + +struct kvm_s390_mchk_info { + __u64 cr14; + __u64 mcic; + __u64 failing_storage_address; + __u32 ext_damage_code; + __u32 pad; + __u8 fixed_logout[16]; +}; + +struct kvm_s390_irq { + __u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_emerg_info emerg; + struct kvm_s390_extcall_info extcall; + struct kvm_s390_prefix_info prefix; + struct kvm_s390_mchk_info mchk; + char reserved[64]; + } u; +}; + /* for KVM_SET_GUEST_DEBUG */ #define KVM_GUESTDBG_ENABLE 0x00000001 @@ -675,6 +740,9 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SPAPR_MULTITCE 94 #define KVM_CAP_EXT_EMUL_CPUID 95 #define KVM_CAP_HYPERV_TIME 96 +#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97 +#define KVM_CAP_ENABLE_CAP_VM 98 +#define KVM_CAP_S390_IRQCHIP 99 #ifdef KVM_CAP_IRQ_ROUTING @@ -690,9 +758,18 @@ struct kvm_irq_routing_msi { __u32 pad; }; +struct kvm_irq_routing_s390_adapter { + __u64 ind_addr; + __u64 summary_addr; + __u64 ind_offset; + __u32 summary_offset; + __u32 adapter_id; +}; + /* gsi routing entry types */ #define KVM_IRQ_ROUTING_IRQCHIP 1 #define KVM_IRQ_ROUTING_MSI 2 +#define KVM_IRQ_ROUTING_S390_ADAPTER 3 struct kvm_irq_routing_entry { __u32 gsi; @@ -702,6 +779,7 @@ struct kvm_irq_routing_entry { union { struct kvm_irq_routing_irqchip irqchip; struct kvm_irq_routing_msi msi; + struct kvm_irq_routing_s390_adapter adapter; __u32 pad[8]; } u; }; @@ -855,6 +933,7 @@ struct kvm_device_attr { #define KVM_DEV_VFIO_GROUP_ADD 1 #define KVM_DEV_VFIO_GROUP_DEL 2 #define KVM_DEV_TYPE_ARM_VGIC_V2 5 +#define KVM_DEV_TYPE_FLIC 6 /* * ioctls for VM fds @@ -1009,6 +1088,10 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_DEBUGREGS */ #define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) #define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) +/* + * vcpu version available with KVM_ENABLE_CAP + * vm version available with KVM_CAP_ENABLE_CAP_VM + */ #define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) /* Available with KVM_CAP_XSAVE */ #define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave) diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h index 335e8a7cad3..c140620dad9 100644 --- a/include/uapi/linux/libc-compat.h +++ b/include/uapi/linux/libc-compat.h @@ -85,6 +85,12 @@ #endif /* _NETINET_IN_H */ +/* Definitions for xattr.h */ +#if defined(_SYS_XATTR_H) +#define __UAPI_DEF_XATTR 0 +#else +#define __UAPI_DEF_XATTR 1 +#endif /* If we did not see any headers from any supported C libraries, * or we are being included in the kernel, then define everything @@ -98,6 +104,9 @@ #define __UAPI_DEF_IPV6_MREQ 1 #define __UAPI_DEF_IPPROTO_V6 1 +/* Definitions for xattr.h */ +#define __UAPI_DEF_XATTR 1 + #endif /* __GLIBC__ */ #endif /* _UAPI_LIBC_COMPAT_H */ diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h new file mode 100644 index 00000000000..bc9abfe88c9 --- /dev/null +++ b/include/uapi/linux/mpls.h @@ -0,0 +1,34 @@ +#ifndef _UAPI_MPLS_H +#define _UAPI_MPLS_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* Reference: RFC 5462, RFC 3032 + * + * 0 1 2 3 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Label | TC |S| TTL | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * Label: Label Value, 20 bits + * TC: Traffic Class field, 3 bits + * S: Bottom of Stack, 1 bit + * TTL: Time to Live, 8 bits + */ + +struct mpls_label { + __be32 entry; +}; + +#define MPLS_LS_LABEL_MASK 0xFFFFF000 +#define MPLS_LS_LABEL_SHIFT 12 +#define MPLS_LS_TC_MASK 0x00000E00 +#define MPLS_LS_TC_SHIFT 9 +#define MPLS_LS_S_MASK 0x00000100 +#define MPLS_LS_S_SHIFT 8 +#define MPLS_LS_TTL_MASK 0x000000FF +#define MPLS_LS_TTL_SHIFT 0 + +#endif /* _UAPI_MPLS_H */ diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h index 6b9500bc2d5..fdfbd1c1706 100644 --- a/include/uapi/linux/netdevice.h +++ b/include/uapi/linux/netdevice.h @@ -49,5 +49,11 @@ enum { IF_PORT_100BASEFX }; +/* hardware address assignment types */ +#define NET_ADDR_PERM 0 /* address is permanent (default) */ +#define NET_ADDR_RANDOM 1 /* address is generated randomly */ +#define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ #endif /* _UAPI_LINUX_NETDEVICE_H */ diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 25d3b2f79c0..78c2f2e7992 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -82,6 +82,8 @@ enum { IPSET_ATTR_PROTO, /* 7 */ IPSET_ATTR_CADT_FLAGS, /* 8 */ IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ + IPSET_ATTR_MARK, /* 10 */ + IPSET_ATTR_MARKMASK, /* 11 */ /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ @@ -144,6 +146,7 @@ enum ipset_errno { IPSET_ERR_IPADDR_IPV6, IPSET_ERR_COUNTER, IPSET_ERR_COMMENT, + IPSET_ERR_INVALID_MARKMASK, /* Type specific error codes */ IPSET_ERR_TYPE_SPECIFIC = 4352, @@ -182,9 +185,18 @@ enum ipset_cadt_flags { IPSET_FLAG_WITH_COUNTERS = (1 << IPSET_FLAG_BIT_WITH_COUNTERS), IPSET_FLAG_BIT_WITH_COMMENT = 4, IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT), + IPSET_FLAG_BIT_WITH_FORCEADD = 5, + IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD), IPSET_FLAG_CADT_MAX = 15, }; +/* The flag bits which correspond to the non-extension create flags */ +enum ipset_create_flags { + IPSET_CREATE_FLAG_BIT_FORCEADD = 0, + IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_MAX = 7, +}; + /* Commands with settype-specific attributes */ enum ipset_adt { IPSET_ADD, diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 83c985a6170..c88ccbfda5f 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -1,7 +1,8 @@ #ifndef _LINUX_NF_TABLES_H #define _LINUX_NF_TABLES_H -#define NFT_CHAIN_MAXNAMELEN 32 +#define NFT_CHAIN_MAXNAMELEN 32 +#define NFT_USERDATA_MAXLEN 256 enum nft_registers { NFT_REG_VERDICT, @@ -156,6 +157,7 @@ enum nft_chain_attributes { * @NFTA_RULE_EXPRESSIONS: list of expressions (NLA_NESTED: nft_expr_attributes) * @NFTA_RULE_COMPAT: compatibility specifications of the rule (NLA_NESTED: nft_rule_compat_attributes) * @NFTA_RULE_POSITION: numeric handle of the previous rule (NLA_U64) + * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) */ enum nft_rule_attributes { NFTA_RULE_UNSPEC, @@ -165,6 +167,7 @@ enum nft_rule_attributes { NFTA_RULE_EXPRESSIONS, NFTA_RULE_COMPAT, NFTA_RULE_POSITION, + NFTA_RULE_USERDATA, __NFTA_RULE_MAX }; #define NFTA_RULE_MAX (__NFTA_RULE_MAX - 1) @@ -601,6 +604,7 @@ enum nft_ct_keys { NFT_CT_PROTOCOL, NFT_CT_PROTO_SRC, NFT_CT_PROTO_DST, + NFT_CT_LABELS, }; /** diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 6ad6cc03ccd..9789dc95b6a 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -150,6 +150,8 @@ enum nfc_commands { * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status * @NFC_ATTR_APDU: Secure element APDU + * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier + * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -178,6 +180,8 @@ enum nfc_attrs { NFC_ATTR_SE_AID, NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, NFC_ATTR_SE_APDU, + NFC_ATTR_TARGET_ISO15693_DSFID, + NFC_ATTR_TARGET_ISO15693_UID, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -200,6 +204,7 @@ enum nfc_sdp_attr { #define NFC_SENSF_RES_MAXSIZE 18 #define NFC_GB_MAXSIZE 48 #define NFC_FIRMWARE_NAME_MAXSIZE 32 +#define NFC_ISO15693_UID_MAXSIZE 8 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -208,8 +213,9 @@ enum nfc_sdp_attr { #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 #define NFC_PROTO_ISO14443_B 6 +#define NFC_PROTO_ISO15693 7 -#define NFC_PROTO_MAX 7 +#define NFC_PROTO_MAX 8 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -227,6 +233,7 @@ enum nfc_sdp_attr { #define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +#define NFC_PROTO_ISO15693_MASK (1 << NFC_PROTO_ISO15693) /* NFC Secure Elements */ #define NFC_SE_UICC 0x1 diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 91054fd660e..1ba9d626aa8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -303,8 +303,9 @@ * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan * results available. * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has @@ -418,8 +419,18 @@ * %NL80211_ATTR_SSID attribute, and can optionally specify the association * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -1555,6 +1566,19 @@ enum nl80211_commands { * data is in the format defined for the payload of the QoS Map Set element * in IEEE Std 802.11-2012, 8.4.2.97. * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1883,6 +1907,13 @@ enum nl80211_attrs { NL80211_ATTR_QOS_MAP, + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + + NL80211_ATTR_TDLS_PEER_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2304,6 +2335,7 @@ enum nl80211_band_attr { * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel * using this channel as the primary or any of the secondary channels * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2322,6 +2354,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2412,12 +2445,14 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -2433,6 +2468,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, NL80211_ATTR_POWER_RULE_MAX_EIRP, + NL80211_ATTR_DFS_CAC_TIME, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 @@ -2442,9 +2479,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -2477,6 +2520,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, * this includes probe requests or modes of operation that require * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -2488,6 +2534,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_PTMP_ONLY = 1<<6, NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -3131,6 +3178,7 @@ enum nl80211_key_attributes { * in an array of MCS numbers. * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -3139,6 +3187,7 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_LEGACY, NL80211_TXRATE_HT, NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -3156,6 +3205,12 @@ struct nl80211_txrate_vht { __u16 mcs[NL80211_VHT_NSS_MAX]; }; +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band @@ -3801,11 +3856,6 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. - * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active - * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel - * in the interface combinations, even when it's only used for scan - * and remain-on-channel. This could be due to, for example, the - * remain-on-channel implementation requiring a channel context. * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode @@ -3847,7 +3897,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, - NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + /* bit 4 is reserved - don't use */ NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, @@ -4037,4 +4087,20 @@ struct nl80211_vendor_cmd_info { __u32 subcmd; }; +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/nvme.h b/include/uapi/linux/nvme.h index e5ab6220111..096fe1c6f83 100644 --- a/include/uapi/linux/nvme.h +++ b/include/uapi/linux/nvme.h @@ -434,6 +434,7 @@ enum { NVME_SC_REFTAG_CHECK = 0x284, NVME_SC_COMPARE_FAILED = 0x285, NVME_SC_ACCESS_DENIED = 0x286, + NVME_SC_DNR = 0x4000, }; struct nvme_completion { diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h index 0b80c806631..ada7f0171cc 100644 --- a/include/uapi/linux/pfkeyv2.h +++ b/include/uapi/linux/pfkeyv2.h @@ -235,6 +235,18 @@ struct sadb_x_kmaddress { } __attribute__((packed)); /* sizeof(struct sadb_x_kmaddress) == 8 */ +/* To specify the SA dump filter */ +struct sadb_x_filter { + __u16 sadb_x_filter_len; + __u16 sadb_x_filter_exttype; + __u32 sadb_x_filter_saddr[4]; + __u32 sadb_x_filter_daddr[4]; + __u16 sadb_x_filter_family; + __u8 sadb_x_filter_splen; + __u8 sadb_x_filter_dplen; +} __attribute__((packed)); +/* sizeof(struct sadb_x_filter) == 40 */ + /* Message types */ #define SADB_RESERVED 0 #define SADB_GETSPI 1 @@ -358,7 +370,8 @@ struct sadb_x_kmaddress { #define SADB_X_EXT_SEC_CTX 24 /* Used with MIGRATE to pass @ to IKE for negotiation */ #define SADB_X_EXT_KMADDRESS 25 -#define SADB_EXT_MAX 25 +#define SADB_X_EXT_FILTER 26 +#define SADB_EXT_MAX 26 /* Identity Extension values */ #define SADB_IDENTTYPE_RESERVED 0 diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index 289760f424a..58afc04c107 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -149,4 +149,7 @@ #define PR_GET_TID_ADDRESS 40 +#define PR_SET_THP_DISABLE 41 +#define PR_GET_THP_DISABLE 42 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index b65c834f83e..f0b7bfe5da9 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -50,7 +50,8 @@ struct ptp_clock_caps { int n_ext_ts; /* Number of external time stamp channels. */ int n_per_out; /* Number of programmable periodic signals. */ int pps; /* Whether the clock supports a PPS callback. */ - int rsv[15]; /* Reserved for future use. */ + int n_pins; /* Number of input/output pins. */ + int rsv[14]; /* Reserved for future use. */ }; struct ptp_extts_request { @@ -80,6 +81,40 @@ struct ptp_sys_offset { struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; }; +enum ptp_pin_function { + PTP_PF_NONE, + PTP_PF_EXTTS, + PTP_PF_PEROUT, + PTP_PF_PHYSYNC, +}; + +struct ptp_pin_desc { + /* + * Hardware specific human readable pin name. This field is + * set by the kernel during the PTP_PIN_GETFUNC ioctl and is + * ignored for the PTP_PIN_SETFUNC ioctl. + */ + char name[64]; + /* + * Pin index in the range of zero to ptp_clock_caps.n_pins - 1. + */ + unsigned int index; + /* + * Which of the PTP_PF_xxx functions to use on this pin. + */ + unsigned int func; + /* + * The specific channel to use for this function. + * This corresponds to the 'index' field of the + * PTP_EXTTS_REQUEST and PTP_PEROUT_REQUEST ioctls. + */ + unsigned int chan; + /* + * Reserved for future use. + */ + unsigned int rsv[5]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) @@ -87,6 +122,8 @@ struct ptp_sys_offset { #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) #define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) +#define PTP_PIN_GETFUNC _IOWR(PTP_CLK_MAGIC, 6, struct ptp_pin_desc) +#define PTP_PIN_SETFUNC _IOW(PTP_CLK_MAGIC, 7, struct ptp_pin_desc) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index bbaba22f2d1..df40137f33d 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -252,6 +252,7 @@ enum LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ + LINUX_MIB_TCPFASTOPENACTIVEFAIL, /* TCPFastOpenActiveFail */ LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/ LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */ LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ @@ -259,6 +260,11 @@ enum LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ LINUX_MIB_TCPAUTOCORKING, /* TCPAutoCorking */ + LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */ + LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */ + LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */ + LINUX_MIB_TCPSYNRETRANS, /* TCPSynRetrans */ + LINUX_MIB_TCPORIGDATASENT, /* TCPOrigDataSent */ __LINUX_MIB_MAX }; diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index 52d9ed01855..dd5f21e7580 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -42,6 +42,10 @@ #define SPI_LOOP 0x20 #define SPI_NO_CS 0x40 #define SPI_READY 0x80 +#define SPI_TX_DUAL 0x100 +#define SPI_TX_QUAD 0x200 +#define SPI_RX_DUAL 0x400 +#define SPI_RX_QUAD 0x800 /*---------------------------------------------------------------------------*/ @@ -92,7 +96,9 @@ struct spi_ioc_transfer { __u16 delay_usecs; __u8 bits_per_word; __u8 cs_change; - __u32 pad; + __u8 tx_nbits; + __u8 rx_nbits; + __u16 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; @@ -110,7 +116,7 @@ struct spi_ioc_transfer { #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) -/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */ +/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) (limited to 8 bits) */ #define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8) #define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8) @@ -126,6 +132,10 @@ struct spi_ioc_transfer { #define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32) #define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32) +/* Read / Write of the SPI mode field */ +#define SPI_IOC_RD_MODE32 _IOR(SPI_IOC_MAGIC, 5, __u32) +#define SPI_IOC_WR_MODE32 _IOW(SPI_IOC_MAGIC, 5, __u32) + #endif /* SPIDEV_H */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 377f1e59411..3b9718328d8 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -186,6 +186,9 @@ struct tcp_info { __u32 tcpi_rcv_space; __u32 tcpi_total_retrans; + + __u64 tcpi_pacing_rate; + __u64 tcpi_max_pacing_rate; }; /* for TCP_MD5SIG socket option */ diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h index 54a37b13f2c..93533926035 100644 --- a/include/uapi/linux/tcp_metrics.h +++ b/include/uapi/linux/tcp_metrics.h @@ -11,12 +11,15 @@ #define TCP_METRICS_GENL_VERSION 0x1 enum tcp_metric_index { - TCP_METRIC_RTT, - TCP_METRIC_RTTVAR, + TCP_METRIC_RTT, /* in ms units */ + TCP_METRIC_RTTVAR, /* in ms units */ TCP_METRIC_SSTHRESH, TCP_METRIC_CWND, TCP_METRIC_REORDERING, + TCP_METRIC_RTT_US, /* in usec units */ + TCP_METRIC_RTTVAR_US, /* in usec units */ + /* Always last. */ __TCP_METRIC_MAX, }; diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index 414b74be4da..1e3b09c191c 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -21,6 +21,7 @@ #include <linux/input.h> #include <linux/types.h> +#include <linux/hid.h> enum uhid_event_type { UHID_CREATE, @@ -34,6 +35,8 @@ enum uhid_event_type { UHID_INPUT, UHID_FEATURE, UHID_FEATURE_ANSWER, + UHID_CREATE2, + UHID_INPUT2, }; struct uhid_create_req { @@ -50,6 +53,19 @@ struct uhid_create_req { __u32 country; } __attribute__((__packed__)); +struct uhid_create2_req { + __u8 name[128]; + __u8 phys[64]; + __u8 uniq[64]; + __u16 rd_size; + __u16 bus; + __u32 vendor; + __u32 product; + __u32 version; + __u32 country; + __u8 rd_data[HID_MAX_DESCRIPTOR_SIZE]; +} __attribute__((__packed__)); + #define UHID_DATA_MAX 4096 enum uhid_report_type { @@ -63,6 +79,11 @@ struct uhid_input_req { __u16 size; } __attribute__((__packed__)); +struct uhid_input2_req { + __u16 size; + __u8 data[UHID_DATA_MAX]; +} __attribute__((__packed__)); + struct uhid_output_req { __u8 data[UHID_DATA_MAX]; __u16 size; @@ -100,6 +121,8 @@ struct uhid_event { struct uhid_output_ev_req output_ev; struct uhid_feature_req feature; struct uhid_feature_answer_req feature_answer; + struct uhid_create2_req create2; + struct uhid_input2_req input2; } u; } __attribute__((__packed__)); diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index f35aa0a338c..b6a9cdd6e09 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -56,6 +56,7 @@ #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a #define USB_CDC_MBIM_TYPE 0x1b +#define USB_CDC_MBIM_EXTENDED_TYPE 0x1c /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -205,6 +206,17 @@ struct usb_cdc_mbim_desc { __u8 bmNetworkCapabilities; } __attribute__ ((packed)); +/* "MBIM Extended Functional Descriptor" from CDC MBIM spec 1.0 errata-1 */ +struct usb_cdc_mbim_extended_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMExtendedVersion; + __u8 bMaxOutstandingCommandMessages; + __le16 wMTU; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index d6b01283f85..2a4b4a72a4f 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -10,9 +10,15 @@ enum { FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 + FUNCTIONFS_STRINGS_MAGIC = 2, + FUNCTIONFS_DESCRIPTORS_MAGIC_V2 = 3, }; +enum functionfs_flags { + FUNCTIONFS_HAS_FS_DESC = 1, + FUNCTIONFS_HAS_HS_DESC = 2, + FUNCTIONFS_HAS_SS_DESC = 4, +}; #ifndef __KERNEL__ @@ -29,29 +35,39 @@ struct usb_endpoint_descriptor_no_audio { /* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* * Descriptors format: * * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC_V2 | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | flags | LE32 | combination of functionfs_flags | + * | | fs_count | LE32 | number of full-speed descriptors | + * | | hs_count | LE32 | number of high-speed descriptors | + * | | ss_count | LE32 | number of super-speed descriptors | + * | | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * | | ss_descrs | Descriptor[] | list of super-speed descriptors | + * + * Depending on which flags are set, various fields may be missing in the + * structure. Any flags that are not recognised cause the whole block to be + * rejected with -ENOSYS. + * + * Legacy descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC | * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | * | | hs_descrs | Descriptor[] | list of high-speed descriptors | * - * descs are just valid USB descriptors and have the following format: + * All numbers must be in little endian order. + * + * Descriptor[] is an array of valid USB descriptors which have the following + * format: * * | off | name | type | description | * |-----+-----------------+------+--------------------------| diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h index 0c65e4b1261..abe5f4bd4d8 100644 --- a/include/uapi/linux/usbdevice_fs.h +++ b/include/uapi/linux/usbdevice_fs.h @@ -102,7 +102,10 @@ struct usbdevfs_urb { int buffer_length; int actual_length; int start_frame; - int number_of_packets; + union { + int number_of_packets; /* Only used for isoc urbs */ + unsigned int stream_id; /* Only used with bulk streams */ + }; int error_count; unsigned int signr; /* signal to be sent on completion, or 0 if none should be sent. */ @@ -144,6 +147,11 @@ struct usbdevfs_disconnect_claim { char driver[USBDEVFS_MAXDRIVERNAME + 1]; }; +struct usbdevfs_streams { + unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */ + unsigned int num_eps; + unsigned char eps[0]; +}; #define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) #define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) @@ -176,5 +184,7 @@ struct usbdevfs_disconnect_claim { #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) #define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) +#define USBDEVFS_ALLOC_STREAMS _IOR('U', 28, struct usbdevfs_streams) +#define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ diff --git a/include/uapi/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h index 4f0667e010d..9bf508ad095 100644 --- a/include/uapi/linux/v4l2-common.h +++ b/include/uapi/linux/v4l2-common.h @@ -29,6 +29,8 @@ #ifndef __V4L2_COMMON__ #define __V4L2_COMMON__ +#include <linux/types.h> + /* * * Selection interface definitions @@ -68,4 +70,12 @@ #define V4L2_SUBDEV_SEL_FLAG_SIZE_LE V4L2_SEL_FLAG_LE #define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG +struct v4l2_edid { + __u32 pad; + __u32 start_block; + __u32 blocks; + __u32 reserved[5]; + __u8 __user *edid; +}; + #endif /* __V4L2_COMMON__ */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 2cbe605bbe0..2ac5597f3ee 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -60,6 +60,7 @@ #define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */ #define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */ #define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* FM Receiver controls */ +#define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ /* User-class control IDs */ @@ -376,6 +377,8 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) #define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225) #define V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (V4L2_CID_MPEG_BASE+226) +#define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (V4L2_CID_MPEG_BASE+227) +#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) @@ -812,6 +815,9 @@ enum v4l2_flash_strobe_source { #define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3) #define V4L2_FLASH_FAULT_OVER_CURRENT (1 << 4) #define V4L2_FLASH_FAULT_INDICATOR (1 << 5) +#define V4L2_FLASH_FAULT_UNDER_VOLTAGE (1 << 6) +#define V4L2_FLASH_FAULT_INPUT_VOLTAGE (1 << 7) +#define V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE (1 << 8) #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) @@ -895,4 +901,17 @@ enum v4l2_deemphasis { #define V4L2_CID_RDS_RECEPTION (V4L2_CID_FM_RX_CLASS_BASE + 2) +#define V4L2_CID_RF_TUNER_CLASS_BASE (V4L2_CTRL_CLASS_RF_TUNER | 0x900) +#define V4L2_CID_RF_TUNER_CLASS (V4L2_CTRL_CLASS_RF_TUNER | 1) + +#define V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 11) +#define V4L2_CID_RF_TUNER_BANDWIDTH (V4L2_CID_RF_TUNER_CLASS_BASE + 12) +#define V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 41) +#define V4L2_CID_RF_TUNER_LNA_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 42) +#define V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 51) +#define V4L2_CID_RF_TUNER_MIXER_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 52) +#define V4L2_CID_RF_TUNER_IF_GAIN_AUTO (V4L2_CID_RF_TUNER_CLASS_BASE + 61) +#define V4L2_CID_RF_TUNER_IF_GAIN (V4L2_CID_RF_TUNER_CLASS_BASE + 62) +#define V4L2_CID_RF_TUNER_PLL_LOCK (V4L2_CID_RF_TUNER_CLASS_BASE + 91) + #endif diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index be709fe2955..b6a5fe00a47 100644 --- a/include/uapi/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h @@ -823,4 +823,21 @@ V4L2_DV_FL_REDUCED_BLANKING) \ } +/* 4K resolutions */ +#define V4L2_DV_BT_DMT_4096X2160P60_RB { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 556744000, 8, 32, 40, 48, 8, 6, 0, 0, 0, \ + V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ + V4L2_DV_FL_REDUCED_BLANKING) \ +} + +#define V4L2_DV_BT_DMT_4096X2160P59_94_RB { \ + .type = V4L2_DV_BT_656_1120, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + 556188000, 8, 32, 40, 48, 8, 6, 0, 0, 0, \ + V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ + V4L2_DV_FL_REDUCED_BLANKING) \ +} + #endif diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a33c4daadce..87e05159f63 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -148,13 +148,8 @@ struct v4l2_subdev_selection { __u32 reserved[8]; }; -struct v4l2_subdev_edid { - __u32 pad; - __u32 start_block; - __u32 blocks; - __u32 reserved[5]; - __u8 __user *edid; -}; +/* Backwards compatibility define --- to be removed */ +#define v4l2_subdev_edid v4l2_edid #define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) #define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) @@ -174,7 +169,8 @@ struct v4l2_subdev_edid { _IOWR('V', 61, struct v4l2_subdev_selection) #define VIDIOC_SUBDEV_S_SELECTION \ _IOWR('V', 62, struct v4l2_subdev_selection) -#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_subdev_edid) -#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_subdev_edid) +/* These two G/S_EDID ioctls are identical to the ioctls in videodev2.h */ +#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_edid) +#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_edid) #endif diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 0fd47f5bc14..cb9023d4f06 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -23,6 +23,12 @@ #define VFIO_TYPE1_IOMMU 1 #define VFIO_SPAPR_TCE_IOMMU 2 +#define VFIO_TYPE1v2_IOMMU 3 +/* + * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This + * capability is subject to change as groups are added or removed. + */ +#define VFIO_DMA_CC_IOMMU 4 /* * The IOCTL interface is designed for extensibility by embedding the diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 6ae7bbe988c..ea468ee8fe2 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -139,6 +139,7 @@ enum v4l2_buf_type { #endif V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, + V4L2_BUF_TYPE_SDR_CAPTURE = 11, /* Deprecated, do not use */ V4L2_BUF_TYPE_PRIVATE = 0x80, }; @@ -159,6 +160,8 @@ enum v4l2_tuner_type { V4L2_TUNER_RADIO = 1, V4L2_TUNER_ANALOG_TV = 2, V4L2_TUNER_DIGITAL_TV = 3, + V4L2_TUNER_ADC = 4, + V4L2_TUNER_RF = 5, }; enum v4l2_memory { @@ -264,6 +267,8 @@ struct v4l2_capability { #define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ #define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ +#define V4L2_CAP_SDR_CAPTURE 0x00100000 /* Is a SDR capture device */ + #define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ @@ -431,6 +436,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ #define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */ +/* SDR formats - used only for Software Defined Radio devices */ +#define V4L2_SDR_FMT_CU8 v4l2_fourcc('C', 'U', '0', '8') /* IQ u8 */ +#define V4L2_SDR_FMT_CU16LE v4l2_fourcc('C', 'U', '1', '6') /* IQ u16le */ + /* * F O R M A T E N U M E R A T I O N */ @@ -669,24 +678,36 @@ struct v4l2_buffer { }; /* Flags for 'flags' field */ -#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +/* Buffer is mapped (flag) */ +#define V4L2_BUF_FLAG_MAPPED 0x00000001 +/* Buffer is queued for processing */ +#define V4L2_BUF_FLAG_QUEUED 0x00000002 +/* Buffer is ready */ +#define V4L2_BUF_FLAG_DONE 0x00000004 +/* Image is a keyframe (I-frame) */ +#define V4L2_BUF_FLAG_KEYFRAME 0x00000008 +/* Image is a P-frame */ +#define V4L2_BUF_FLAG_PFRAME 0x00000010 +/* Image is a B-frame */ +#define V4L2_BUF_FLAG_BFRAME 0x00000020 /* Buffer is ready, but the data contained within is corrupted. */ -#define V4L2_BUF_FLAG_ERROR 0x0040 -#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ +#define V4L2_BUF_FLAG_ERROR 0x00000040 +/* timecode field is valid */ +#define V4L2_BUF_FLAG_TIMECODE 0x00000100 +/* Buffer is prepared for queuing */ +#define V4L2_BUF_FLAG_PREPARED 0x00000400 /* Cache handling flags */ -#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 -#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x00000800 +#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x00001000 /* Timestamp type */ -#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0xe000 -#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x0000 -#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x2000 -#define V4L2_BUF_FLAG_TIMESTAMP_COPY 0x4000 +#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0x0000e000 +#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x00000000 +#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x00002000 +#define V4L2_BUF_FLAG_TIMESTAMP_COPY 0x00004000 +/* Timestamp sources. */ +#define V4L2_BUF_FLAG_TSTAMP_SRC_MASK 0x00070000 +#define V4L2_BUF_FLAG_TSTAMP_SRC_EOF 0x00000000 +#define V4L2_BUF_FLAG_TSTAMP_SRC_SOE 0x00010000 /** * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor @@ -1059,14 +1080,14 @@ struct v4l2_bt_timings { /* A few useful defines to calculate the total blanking and frame sizes */ #define V4L2_DV_BT_BLANKING_WIDTH(bt) \ - (bt->hfrontporch + bt->hsync + bt->hbackporch) + ((bt)->hfrontporch + (bt)->hsync + (bt)->hbackporch) #define V4L2_DV_BT_FRAME_WIDTH(bt) \ - (bt->width + V4L2_DV_BT_BLANKING_WIDTH(bt)) + ((bt)->width + V4L2_DV_BT_BLANKING_WIDTH(bt)) #define V4L2_DV_BT_BLANKING_HEIGHT(bt) \ - (bt->vfrontporch + bt->vsync + bt->vbackporch + \ - bt->il_vfrontporch + bt->il_vsync + bt->il_vbackporch) + ((bt)->vfrontporch + (bt)->vsync + (bt)->vbackporch + \ + (bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) #define V4L2_DV_BT_FRAME_HEIGHT(bt) \ - (bt->height + V4L2_DV_BT_BLANKING_HEIGHT(bt)) + ((bt)->height + V4L2_DV_BT_BLANKING_HEIGHT(bt)) /** struct v4l2_dv_timings - DV timings * @type: the type of the timings @@ -1339,6 +1360,7 @@ struct v4l2_modulator { #define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 #define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 #define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 +#define V4L2_TUNER_CAP_1HZ 0x1000 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -1692,6 +1714,15 @@ struct v4l2_pix_format_mplane { } __attribute__ ((packed)); /** + * struct v4l2_sdr_format - SDR format definition + * @pixelformat: little endian four character code (fourcc) + */ +struct v4l2_sdr_format { + __u32 pixelformat; + __u8 reserved[28]; +} __attribute__ ((packed)); + +/** * struct v4l2_format - stream data format * @type: enum v4l2_buf_type; type of the data stream * @pix: definition of an image format @@ -1709,6 +1740,7 @@ struct v4l2_format { struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ + struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */ __u8 raw_data[200]; /* user-defined */ } fmt; }; @@ -1885,6 +1917,8 @@ struct v4l2_create_buffers { #define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) #define VIDIOC_G_INPUT _IOR('V', 38, int) #define VIDIOC_S_INPUT _IOWR('V', 39, int) +#define VIDIOC_G_EDID _IOWR('V', 40, struct v4l2_edid) +#define VIDIOC_S_EDID _IOWR('V', 41, struct v4l2_edid) #define VIDIOC_G_OUTPUT _IOR('V', 46, int) #define VIDIOC_S_OUTPUT _IOWR('V', 47, int) #define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index 40bbc04b6f8..c38355c1f3c 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -7,11 +7,18 @@ Copyright (c) 2001-2002 Silicon Graphics, Inc. All Rights Reserved. Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com> */ + +#include <linux/libc-compat.h> + #ifndef _UAPI_LINUX_XATTR_H #define _UAPI_LINUX_XATTR_H +#ifdef __UAPI_DEF_XATTR +#define __USE_KERNEL_XATTR_DEFS + #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ #define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ +#endif /* Namespaces */ #define XATTR_OS2_PREFIX "os2." diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index a8cd6a4a297..25e5dd916ba 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -298,6 +298,8 @@ enum xfrm_attr_type_t { XFRMA_TFCPAD, /* __u32 */ XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */ XFRMA_SA_EXTRA_FLAGS, /* __u32 */ + XFRMA_PROTO, /* __u8 */ + XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) @@ -474,6 +476,14 @@ struct xfrm_user_mapping { __be16 new_sport; }; +struct xfrm_address_filter { + xfrm_address_t saddr; + xfrm_address_t daddr; + __u16 family; + __u8 splen; + __u8 dplen; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 |