diff options
Diffstat (limited to 'include/xen/interface/io/ring.h')
| -rw-r--r-- | include/xen/interface/io/ring.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h new file mode 100644 index 00000000000..e8cbf431c8c --- /dev/null +++ b/include/xen/interface/io/ring.h @@ -0,0 +1,260 @@ +/****************************************************************************** + * ring.h + * + * Shared producer-consumer ring macros. + * + * Tim Deegan and Andrew Warfield November 2004. + */ + +#ifndef __XEN_PUBLIC_IO_RING_H__ +#define __XEN_PUBLIC_IO_RING_H__ + +typedef unsigned int RING_IDX; + +/* Round a 32-bit unsigned constant down to the nearest power of two. */ +#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1)) +#define __RD4(_x) (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2 : __RD2(_x)) +#define __RD8(_x) (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4 : __RD4(_x)) +#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8 : __RD8(_x)) +#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x)>>16)<<16 : __RD16(_x)) + +/* + * Calculate size of a shared ring, given the total available space for the + * ring and indexes (_sz), and the name tag of the request/response structure. + * A ring contains as many entries as will fit, rounded down to the nearest + * power of two (so we can mask with (size-1) to loop around). + */ +#define __RING_SIZE(_s, _sz) \ + (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0]))) + +/* + * Macros to make the correct C datatypes for a new kind of ring. + * + * To make a new ring datatype, you need to have two message structures, + * let's say struct request, and struct response already defined. + * + * In a header where you want the ring datatype declared, you then do: + * + * DEFINE_RING_TYPES(mytag, struct request, struct response); + * + * These expand out to give you a set of types, as you can see below. + * The most important of these are: + * + * struct mytag_sring - The shared ring. + * struct mytag_front_ring - The 'front' half of the ring. + * struct mytag_back_ring - The 'back' half of the ring. + * + * To initialize a ring in your code you need to know the location and size + * of the shared memory area (PAGE_SIZE, for instance). To initialise + * the front half: + * + * struct mytag_front_ring front_ring; + * SHARED_RING_INIT((struct mytag_sring *)shared_page); + * FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page, + * PAGE_SIZE); + * + * Initializing the back follows similarly (note that only the front + * initializes the shared ring): + * + * struct mytag_back_ring back_ring; + * BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page, + * PAGE_SIZE); + */ + +#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \ + \ +/* Shared ring entry */ \ +union __name##_sring_entry { \ + __req_t req; \ + __rsp_t rsp; \ +}; \ + \ +/* Shared ring page */ \ +struct __name##_sring { \ + RING_IDX req_prod, req_event; \ + RING_IDX rsp_prod, rsp_event; \ + uint8_t pad[48]; \ + union __name##_sring_entry ring[1]; /* variable-length */ \ +}; \ + \ +/* "Front" end's private variables */ \ +struct __name##_front_ring { \ + RING_IDX req_prod_pvt; \ + RING_IDX rsp_cons; \ + unsigned int nr_ents; \ + struct __name##_sring *sring; \ +}; \ + \ +/* "Back" end's private variables */ \ +struct __name##_back_ring { \ + RING_IDX rsp_prod_pvt; \ + RING_IDX req_cons; \ + unsigned int nr_ents; \ + struct __name##_sring *sring; \ +}; + +/* + * Macros for manipulating rings. + * + * FRONT_RING_whatever works on the "front end" of a ring: here + * requests are pushed on to the ring and responses taken off it. + * + * BACK_RING_whatever works on the "back end" of a ring: here + * requests are taken off the ring and responses put on. + * + * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL. + * This is OK in 1-for-1 request-response situations where the + * requestor (front end) never has more than RING_SIZE()-1 + * outstanding requests. + */ + +/* Initialising empty rings */ +#define SHARED_RING_INIT(_s) do { \ + (_s)->req_prod = (_s)->rsp_prod = 0; \ + (_s)->req_event = (_s)->rsp_event = 1; \ + memset((_s)->pad, 0, sizeof((_s)->pad)); \ +} while(0) + +#define FRONT_RING_INIT(_r, _s, __size) do { \ + (_r)->req_prod_pvt = 0; \ + (_r)->rsp_cons = 0; \ + (_r)->nr_ents = __RING_SIZE(_s, __size); \ + (_r)->sring = (_s); \ +} while (0) + +#define BACK_RING_INIT(_r, _s, __size) do { \ + (_r)->rsp_prod_pvt = 0; \ + (_r)->req_cons = 0; \ + (_r)->nr_ents = __RING_SIZE(_s, __size); \ + (_r)->sring = (_s); \ +} while (0) + +/* Initialize to existing shared indexes -- for recovery */ +#define FRONT_RING_ATTACH(_r, _s, __size) do { \ + (_r)->sring = (_s); \ + (_r)->req_prod_pvt = (_s)->req_prod; \ + (_r)->rsp_cons = (_s)->rsp_prod; \ + (_r)->nr_ents = __RING_SIZE(_s, __size); \ +} while (0) + +#define BACK_RING_ATTACH(_r, _s, __size) do { \ + (_r)->sring = (_s); \ + (_r)->rsp_prod_pvt = (_s)->rsp_prod; \ + (_r)->req_cons = (_s)->req_prod; \ + (_r)->nr_ents = __RING_SIZE(_s, __size); \ +} while (0) + +/* How big is this ring? */ +#define RING_SIZE(_r) \ + ((_r)->nr_ents) + +/* Number of free requests (for use on front side only). */ +#define RING_FREE_REQUESTS(_r) \ + (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons)) + +/* Test if there is an empty slot available on the front ring. + * (This is only meaningful from the front. ) + */ +#define RING_FULL(_r) \ + (RING_FREE_REQUESTS(_r) == 0) + +/* Test if there are outstanding messages to be processed on a ring. */ +#define RING_HAS_UNCONSUMED_RESPONSES(_r) \ + ((_r)->sring->rsp_prod - (_r)->rsp_cons) + +#define RING_HAS_UNCONSUMED_REQUESTS(_r) \ + ({ \ + unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \ + unsigned int rsp = RING_SIZE(_r) - \ + ((_r)->req_cons - (_r)->rsp_prod_pvt); \ + req < rsp ? req : rsp; \ + }) + +/* Direct access to individual ring elements, by index. */ +#define RING_GET_REQUEST(_r, _idx) \ + (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req)) + +#define RING_GET_RESPONSE(_r, _idx) \ + (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp)) + +/* Loop termination condition: Would the specified index overflow the ring? */ +#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \ + (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r)) + +#define RING_PUSH_REQUESTS(_r) do { \ + wmb(); /* back sees requests /before/ updated producer index */ \ + (_r)->sring->req_prod = (_r)->req_prod_pvt; \ +} while (0) + +#define RING_PUSH_RESPONSES(_r) do { \ + wmb(); /* front sees responses /before/ updated producer index */ \ + (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \ +} while (0) + +/* + * Notification hold-off (req_event and rsp_event): + * + * When queueing requests or responses on a shared ring, it may not always be + * necessary to notify the remote end. For example, if requests are in flight + * in a backend, the front may be able to queue further requests without + * notifying the back (if the back checks for new requests when it queues + * responses). + * + * When enqueuing requests or responses: + * + * Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second argument + * is a boolean return value. True indicates that the receiver requires an + * asynchronous notification. + * + * After dequeuing requests or responses (before sleeping the connection): + * + * Use RING_FINAL_CHECK_FOR_REQUESTS() or RING_FINAL_CHECK_FOR_RESPONSES(). + * The second argument is a boolean return value. True indicates that there + * are pending messages on the ring (i.e., the connection should not be put + * to sleep). + * + * These macros will set the req_event/rsp_event field to trigger a + * notification on the very next message that is enqueued. If you want to + * create batches of work (i.e., only receive a notification after several + * messages have been enqueued) then you will need to create a customised + * version of the FINAL_CHECK macro in your own code, which sets the event + * field appropriately. + */ + +#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \ + RING_IDX __old = (_r)->sring->req_prod; \ + RING_IDX __new = (_r)->req_prod_pvt; \ + wmb(); /* back sees requests /before/ updated producer index */ \ + (_r)->sring->req_prod = __new; \ + mb(); /* back sees new requests /before/ we check req_event */ \ + (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \ + (RING_IDX)(__new - __old)); \ +} while (0) + +#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \ + RING_IDX __old = (_r)->sring->rsp_prod; \ + RING_IDX __new = (_r)->rsp_prod_pvt; \ + wmb(); /* front sees responses /before/ updated producer index */ \ + (_r)->sring->rsp_prod = __new; \ + mb(); /* front sees new responses /before/ we check rsp_event */ \ + (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \ + (RING_IDX)(__new - __old)); \ +} while (0) + +#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \ + (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \ + if (_work_to_do) break; \ + (_r)->sring->req_event = (_r)->req_cons + 1; \ + mb(); \ + (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \ +} while (0) + +#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \ + (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \ + if (_work_to_do) break; \ + (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \ + mb(); \ + (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \ +} while (0) + +#endif /* __XEN_PUBLIC_IO_RING_H__ */ |