diff options
Diffstat (limited to 'include/xen/interface')
| -rw-r--r-- | include/xen/interface/io/blkif.h | 36 | ||||
| -rw-r--r-- | include/xen/interface/io/xs_wire.h | 6 | ||||
| -rw-r--r-- | include/xen/interface/physdev.h | 34 | ||||
| -rw-r--r-- | include/xen/interface/xen.h | 39 |
4 files changed, 113 insertions, 2 deletions
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h index 3d5d6db864f..9324488f23f 100644 --- a/include/xen/interface/io/blkif.h +++ b/include/xen/interface/io/blkif.h @@ -57,6 +57,36 @@ typedef uint64_t blkif_sector_t; * "feature-flush-cache" node! */ #define BLKIF_OP_FLUSH_DISKCACHE 3 + +/* + * Recognised only if "feature-discard" is present in backend xenbus info. + * The "feature-discard" node contains a boolean indicating whether trim + * (ATA) or unmap (SCSI) - conviently called discard requests are likely + * to succeed or fail. Either way, a discard request + * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by + * the underlying block-device hardware. The boolean simply indicates whether + * or not it is worthwhile for the frontend to attempt discard requests. + * If a backend does not recognise BLKIF_OP_DISCARD, it should *not* + * create the "feature-discard" node! + * + * Discard operation is a request for the underlying block device to mark + * extents to be erased. However, discard does not guarantee that the blocks + * will be erased from the device - it is just a hint to the device + * controller that these blocks are no longer in use. What the device + * controller does with that information is left to the controller. + * Discard operations are passed with sector_number as the + * sector index to begin discard operations at and nr_sectors as the number of + * sectors to be discarded. The specified sectors should be discarded if the + * underlying block device supports trim (ATA) or unmap (SCSI) operations, + * or a BLKIF_RSP_EOPNOTSUPP should be returned. + * More information about trim/unmap operations at: + * http://t13.org/Documents/UploadedDocuments/docs2008/ + * e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc + * http://www.seagate.com/staticfiles/support/disc/manuals/ + * Interface%20manuals/100293068c.pdf + */ +#define BLKIF_OP_DISCARD 5 + /* * Maximum scatter/gather segments per request. * This is carefully chosen so that sizeof(struct blkif_ring) <= PAGE_SIZE. @@ -74,6 +104,11 @@ struct blkif_request_rw { } seg[BLKIF_MAX_SEGMENTS_PER_REQUEST]; }; +struct blkif_request_discard { + blkif_sector_t sector_number; + uint64_t nr_sectors; +}; + struct blkif_request { uint8_t operation; /* BLKIF_OP_??? */ uint8_t nr_segments; /* number of segments */ @@ -81,6 +116,7 @@ struct blkif_request { uint64_t id; /* private guest value, echoed in resp */ union { struct blkif_request_rw rw; + struct blkif_request_discard discard; } u; }; diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h index 99fcffb372d..f0b6890370b 100644 --- a/include/xen/interface/io/xs_wire.h +++ b/include/xen/interface/io/xs_wire.h @@ -26,7 +26,11 @@ enum xsd_sockmsg_type XS_SET_PERMS, XS_WATCH_EVENT, XS_ERROR, - XS_IS_DOMAIN_INTRODUCED + XS_IS_DOMAIN_INTRODUCED, + XS_RESUME, + XS_SET_TARGET, + XS_RESTRICT, + XS_RESET_WATCHES }; #define XS_WRITE_NONE "NONE" diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index 534cac89a77..c1080d9c705 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -109,6 +109,7 @@ struct physdev_irq { #define MAP_PIRQ_TYPE_MSI 0x0 #define MAP_PIRQ_TYPE_GSI 0x1 #define MAP_PIRQ_TYPE_UNKNOWN 0x2 +#define MAP_PIRQ_TYPE_MSI_SEG 0x3 #define PHYSDEVOP_map_pirq 13 struct physdev_map_pirq { @@ -119,7 +120,7 @@ struct physdev_map_pirq { int index; /* IN or OUT */ int pirq; - /* IN */ + /* IN - high 16 bits hold segment for MAP_PIRQ_TYPE_MSI_SEG */ int bus; /* IN */ int devfn; @@ -198,6 +199,37 @@ struct physdev_get_free_pirq { uint32_t pirq; }; +#define XEN_PCI_DEV_EXTFN 0x1 +#define XEN_PCI_DEV_VIRTFN 0x2 +#define XEN_PCI_DEV_PXM 0x4 + +#define PHYSDEVOP_pci_device_add 25 +struct physdev_pci_device_add { + /* IN */ + uint16_t seg; + uint8_t bus; + uint8_t devfn; + uint32_t flags; + struct { + uint8_t bus; + uint8_t devfn; + } physfn; +#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + uint32_t optarr[]; +#elif defined(__GNUC__) + uint32_t optarr[0]; +#endif +}; + +#define PHYSDEVOP_pci_device_remove 26 +#define PHYSDEVOP_restore_msi_ext 27 +struct physdev_pci_device { + /* IN */ + uint16_t seg; + uint8_t bus; + uint8_t devfn; +}; + /* * Notify that some PIRQ-bound event channels have been unmasked. * ** This command is obsolete since interface version 0x00030202 and is ** diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h index d83cc08921a..6a6e9144934 100644 --- a/include/xen/interface/xen.h +++ b/include/xen/interface/xen.h @@ -450,6 +450,45 @@ struct start_info { int8_t cmd_line[MAX_GUEST_CMDLINE]; }; +struct dom0_vga_console_info { + uint8_t video_type; +#define XEN_VGATYPE_TEXT_MODE_3 0x03 +#define XEN_VGATYPE_VESA_LFB 0x23 + + union { + struct { + /* Font height, in pixels. */ + uint16_t font_height; + /* Cursor location (column, row). */ + uint16_t cursor_x, cursor_y; + /* Number of rows and columns (dimensions in characters). */ + uint16_t rows, columns; + } text_mode_3; + + struct { + /* Width and height, in pixels. */ + uint16_t width, height; + /* Bytes per scan line. */ + uint16_t bytes_per_line; + /* Bits per pixel. */ + uint16_t bits_per_pixel; + /* LFB physical address, and size (in units of 64kB). */ + uint32_t lfb_base; + uint32_t lfb_size; + /* RGB mask offsets and sizes, as defined by VBE 1.2+ */ + uint8_t red_pos, red_size; + uint8_t green_pos, green_size; + uint8_t blue_pos, blue_size; + uint8_t rsvd_pos, rsvd_size; + + /* VESA capabilities (offset 0xa, VESA command 0x4f00). */ + uint32_t gbl_caps; + /* Mode attributes (offset 0x0, VESA command 0x4f01). */ + uint16_t mode_attrs; + } vesa_lfb; + } u; +}; + /* These flags are passed in the 'flags' field of start_info_t. */ #define SIF_PRIVILEGED (1<<0) /* Is the domain privileged? */ #define SIF_INITDOMAIN (1<<1) /* Is this the initial control domain? */ |