diff options
Diffstat (limited to 'include')
88 files changed, 7276 insertions, 7232 deletions
diff --git a/include/asm-sparc/agp.h b/include/asm-sparc/agp.h new file mode 100644 index 00000000000..c2456870b05 --- /dev/null +++ b/include/asm-sparc/agp.h @@ -0,0 +1,20 @@ +#ifndef AGP_H +#define AGP_H 1 + +/* dummy for now */ + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif diff --git a/include/asm-sparc/apb.h b/include/asm-sparc/apb.h new file mode 100644 index 00000000000..8f3b57db810 --- /dev/null +++ b/include/asm-sparc/apb.h @@ -0,0 +1,36 @@ +/* + * apb.h: Advanced PCI Bridge Configuration Registers and Bits + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC64_APB_H +#define _SPARC64_APB_H + +#define APB_TICK_REGISTER 0xb0 +#define APB_INT_ACK 0xb8 +#define APB_PRIMARY_MASTER_RETRY_LIMIT 0xc0 +#define APB_DMA_ASFR 0xc8 +#define APB_DMA_AFAR 0xd0 +#define APB_PIO_TARGET_RETRY_LIMIT 0xd8 +#define APB_PIO_TARGET_LATENCY_TIMER 0xd9 +#define APB_DMA_TARGET_RETRY_LIMIT 0xda +#define APB_DMA_TARGET_LATENCY_TIMER 0xdb +#define APB_SECONDARY_MASTER_RETRY_LIMIT 0xdc +#define APB_SECONDARY_CONTROL 0xdd +#define APB_IO_ADDRESS_MAP 0xde +#define APB_MEM_ADDRESS_MAP 0xdf + +#define APB_PCI_CONTROL_LOW 0xe0 +# define APB_PCI_CTL_LOW_ARB_PARK (1 << 21) +# define APB_PCI_CTL_LOW_ERRINT_EN (1 << 8) + +#define APB_PCI_CONTROL_HIGH 0xe4 +# define APB_PCI_CTL_HIGH_SERR (1 << 2) +# define APB_PCI_CTL_HIGH_ARBITER_EN (1 << 0) + +#define APB_PIO_ASFR 0xe8 +#define APB_PIO_AFAR 0xf0 +#define APB_DIAG_REGISTER 0xf8 + +#endif /* !(_SPARC64_APB_H) */ diff --git a/include/asm-sparc/backoff.h b/include/asm-sparc/backoff.h new file mode 100644 index 00000000000..fa1fdf67e35 --- /dev/null +++ b/include/asm-sparc/backoff.h @@ -0,0 +1,31 @@ +#ifndef _SPARC64_BACKOFF_H +#define _SPARC64_BACKOFF_H + +#define BACKOFF_LIMIT (4 * 1024) + +#ifdef CONFIG_SMP + +#define BACKOFF_SETUP(reg) \ + mov 1, reg + +#define BACKOFF_SPIN(reg, tmp, label) \ + mov reg, tmp; \ +88: brnz,pt tmp, 88b; \ + sub tmp, 1, tmp; \ + set BACKOFF_LIMIT, tmp; \ + cmp reg, tmp; \ + bg,pn %xcc, label; \ + nop; \ + ba,pt %xcc, label; \ + sllx reg, 1, reg; + +#else + +#define BACKOFF_SETUP(reg) +#define BACKOFF_SPIN(reg, tmp, label) \ + ba,pt %xcc, label; \ + nop; + +#endif + +#endif /* _SPARC64_BACKOFF_H */ diff --git a/include/asm-sparc/bbc.h b/include/asm-sparc/bbc.h new file mode 100644 index 00000000000..423a85800aa --- /dev/null +++ b/include/asm-sparc/bbc.h @@ -0,0 +1,225 @@ +/* + * bbc.h: Defines for BootBus Controller found on UltraSPARC-III + * systems. + * + * Copyright (C) 2000 David S. Miller (davem@redhat.com) + */ + +#ifndef _SPARC64_BBC_H +#define _SPARC64_BBC_H + +/* Register sizes are indicated by "B" (Byte, 1-byte), + * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or + * "Q" (Quad, 8 bytes) inside brackets. + */ + +#define BBC_AID 0x00 /* [B] Agent ID */ +#define BBC_DEVP 0x01 /* [B] Device Present */ +#define BBC_ARB 0x02 /* [B] Arbitration */ +#define BBC_QUIESCE 0x03 /* [B] Quiesce */ +#define BBC_WDACTION 0x04 /* [B] Watchdog Action */ +#define BBC_SPG 0x06 /* [B] Soft POR Gen */ +#define BBC_SXG 0x07 /* [B] Soft XIR Gen */ +#define BBC_PSRC 0x08 /* [W] POR Source */ +#define BBC_XSRC 0x0c /* [B] XIR Source */ +#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ +#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ +#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ +#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ +#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ +#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ +#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ +#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ +#define BBC_EBUST 0x20 /* [Q] EBUS Timing */ +#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ +#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ +#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ +#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ +#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ +#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ +#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ +#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ +#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ + +#define BBC_REGS_SIZE 0x40 + +/* There is a 2K scratch ram area at offset 0x80000 but I doubt + * we will use it for anything. + */ + +/* Agent ID register. This register shows the Safari Agent ID + * for the processors. The value returned depends upon which + * cpu is reading the register. + */ +#define BBC_AID_ID 0x07 /* Safari ID */ +#define BBC_AID_RESV 0xf8 /* Reserved */ + +/* Device Present register. One can determine which cpus are actually + * present in the machine by interrogating this register. + */ +#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ +#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ +#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ +#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ +#define BBC_DEVP_RESV 0xf0 /* Reserved */ + +/* Arbitration register. This register is used to block access to + * the BBC from a particular cpu. + */ +#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ +#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ +#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ +#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ +#define BBC_ARB_RESV 0xf0 /* Reserved */ + +/* Quiesce register. Bus and BBC segments for cpus can be disabled + * with this register, ie. for hot plugging. + */ +#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ +#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ +#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ +#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ +#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ +#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ +#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ +#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ + +/* Watchdog Action register. When the watchdog device timer expires + * a line is enabled to the BBC. The action BBC takes when this line + * is asserted can be controlled by this regiser. + */ +#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. + * When clear, BBC ignores watchdog signal. + */ +#define BBC_WDACTION_RESV 0xfe /* Reserved */ + +/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted + * for specific processors or all processors via this register. + */ +#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ +#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ +#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ +#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ +#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset + * the entire system. + */ +#define BBC_SPG_RESV 0xe0 /* Reserved */ + +/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal + * may be asserted to specific processors via this register. + */ +#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ +#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ +#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ +#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ +#define BBC_SXG_RESV 0xf0 /* Reserved */ + +/* POR Source register. One may identify the cause of the most recent + * reset by reading this register. + */ +#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ +#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ +#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ +#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ +#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ +#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ +#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ +#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ +#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ +#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ +#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ +#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ +#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ +#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ +#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ +#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers + * were updated. + */ +#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ +#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring + * device + */ + +/* XIR Source register. The source of an XIR event sent to a processor may + * be determined via this register. + */ +#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ +#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: + * a) Super I/O watchdog fired, or + * b) XIR push button was activated + */ +#define BBC_XSRC_RESV 0xc0 /* Reserved */ + +/* Clock Synthesizers Control register. This register provides the big-bang + * programming interface to the two clock synthesizers of the machine. + */ +#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ +#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ +#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ +#define BBC_CSC_RESV 0x78 /* Reserved */ +#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ + +/* Energy Star Control register. This register is used to generate the + * clock frequency change trigger to the main system devices (Schizo and + * the processors). The transition occurs when bits in this register + * go from 0 to 1, only one bit must be set at once else no action + * occurs. Basically the sequence of events is: + * a) Choose new frequency: full, 1/2 or 1/32 + * b) Program this desired frequency into the cpus and Schizo. + * c) Set the same value in this register. + * d) 16 system clocks later, clear this register. + */ +#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ +#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ +#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ +#define BBC_ES_RESV 0xdc /* Reserved */ + +/* Energy Star Assert Change Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the detection of FREEZE_ACK being asserted and the assertion of + * the CLK_CHANGE_L[2:0] signals. + */ +#define BBC_ES_ACT_VAL 0xff + +/* Energy Star Assert Bypass Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of + * the ESTAR_PLL_BYPASS signal. + */ +#define BBC_ES_ABT_VAL 0xffff + +/* Energy Star PLL Settle Time register. This determines the number of + * BBC clock cycles (which is half the system frequency) between the + * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L + * signal. + */ +#define BBC_ES_PST_VAL 0xffffffff + +/* Energy Star Frequency Switch Latency register. This is the number of + * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first + * edge of the Safari clock at the new frequency. + */ +#define BBC_ES_FSL_VAL 0xffffffff + +/* Keyboard Beep control register. This is a simple enabler for the audio + * beep sound. + */ +#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ +#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ + +/* Keyboard Beep Counter register. There is a free-running counter inside + * the BBC which runs at half the system clock. The bit set in this register + * determines when the audio sound is generated. So for example if bit + * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep + * generator automatically selects a different bit to use if the system clock + * is changed via Energy Star. + */ +#define BBC_KBD_BCNT_BITS 0x0007fc00 +#define BBC_KBC_BCNT_RESV 0xfff803ff + +#endif /* _SPARC64_BBC_H */ + diff --git a/include/asm-sparc/chafsr.h b/include/asm-sparc/chafsr.h new file mode 100644 index 00000000000..85c69b38220 --- /dev/null +++ b/include/asm-sparc/chafsr.h @@ -0,0 +1,241 @@ +#ifndef _SPARC64_CHAFSR_H +#define _SPARC64_CHAFSR_H + +/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ + +/* Comments indicate which processor variants on which the bit definition + * is valid. Codes are: + * ch --> cheetah + * ch+ --> cheetah plus + * jp --> jalapeno + */ + +/* All bits of this register except M_SYNDROME and E_SYNDROME are + * read, write 1 to clear. M_SYNDROME and E_SYNDROME are read-only. + */ + +/* Software bit set by linux trap handlers to indicate that the trap was + * signalled at %tl >= 1. + */ +#define CHAFSR_TL1 (1UL << 63UL) /* n/a */ + +/* Unmapped error from system bus for prefetch queue or + * store queue read operation + */ +#define CHPAFSR_DTO (1UL << 59UL) /* ch+ */ + +/* Bus error from system bus for prefetch queue or store queue + * read operation + */ +#define CHPAFSR_DBERR (1UL << 58UL) /* ch+ */ + +/* Hardware corrected E-cache Tag ECC error */ +#define CHPAFSR_THCE (1UL << 57UL) /* ch+ */ +/* System interface protocol error, hw timeout caused */ +#define JPAFSR_JETO (1UL << 57UL) /* jp */ + +/* SW handled correctable E-cache Tag ECC error */ +#define CHPAFSR_TSCE (1UL << 56UL) /* ch+ */ +/* Parity error on system snoop results */ +#define JPAFSR_SCE (1UL << 56UL) /* jp */ + +/* Uncorrectable E-cache Tag ECC error */ +#define CHPAFSR_TUE (1UL << 55UL) /* ch+ */ +/* System interface protocol error, illegal command detected */ +#define JPAFSR_JEIC (1UL << 55UL) /* jp */ + +/* Uncorrectable system bus data ECC error due to prefetch + * or store fill request + */ +#define CHPAFSR_DUE (1UL << 54UL) /* ch+ */ +/* System interface protocol error, illegal ADTYPE detected */ +#define JPAFSR_JEIT (1UL << 54UL) /* jp */ + +/* Multiple errors of the same type have occurred. This bit is set when + * an uncorrectable error or a SW correctable error occurs and the status + * bit to report that error is already set. When multiple errors of + * different types are indicated by setting multiple status bits. + * + * This bit is not set if multiple HW corrected errors with the same + * status bit occur, only uncorrectable and SW correctable ones have + * this behavior. + * + * This bit is not set when multiple ECC errors happen within a single + * 64-byte system bus transaction. Only the first ECC error in a 16-byte + * subunit will be logged. All errors in subsequent 16-byte subunits + * from the same 64-byte transaction are ignored. + */ +#define CHAFSR_ME (1UL << 53UL) /* ch,ch+,jp */ + +/* Privileged state error has occurred. This is a capture of PSTATE.PRIV + * at the time the error is detected. + */ +#define CHAFSR_PRIV (1UL << 52UL) /* ch,ch+,jp */ + +/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error + * bits and record the most recently detected errors. Bits accumulate + * errors that have been detected since the last write to clear the bit. + */ + +/* System interface protocol error. The processor asserts its' ERROR + * pin when this event occurs and it also logs a specific cause code + * into a JTAG scannable flop. + */ +#define CHAFSR_PERR (1UL << 51UL) /* ch,ch+,jp */ + +/* Internal processor error. The processor asserts its' ERROR + * pin when this event occurs and it also logs a specific cause code + * into a JTAG scannable flop. + */ +#define CHAFSR_IERR (1UL << 50UL) /* ch,ch+,jp */ + +/* System request parity error on incoming address */ +#define CHAFSR_ISAP (1UL << 49UL) /* ch,ch+,jp */ + +/* HW Corrected system bus MTAG ECC error */ +#define CHAFSR_EMC (1UL << 48UL) /* ch,ch+ */ +/* Parity error on L2 cache tag SRAM */ +#define JPAFSR_ETP (1UL << 48UL) /* jp */ + +/* Uncorrectable system bus MTAG ECC error */ +#define CHAFSR_EMU (1UL << 47UL) /* ch,ch+ */ +/* Out of range memory error has occurred */ +#define JPAFSR_OM (1UL << 47UL) /* jp */ + +/* HW Corrected system bus data ECC error for read of interrupt vector */ +#define CHAFSR_IVC (1UL << 46UL) /* ch,ch+ */ +/* Error due to unsupported store */ +#define JPAFSR_UMS (1UL << 46UL) /* jp */ + +/* Uncorrectable system bus data ECC error for read of interrupt vector */ +#define CHAFSR_IVU (1UL << 45UL) /* ch,ch+,jp */ + +/* Unmapped error from system bus */ +#define CHAFSR_TO (1UL << 44UL) /* ch,ch+,jp */ + +/* Bus error response from system bus */ +#define CHAFSR_BERR (1UL << 43UL) /* ch,ch+,jp */ + +/* SW Correctable E-cache ECC error for instruction fetch or data access + * other than block load. + */ +#define CHAFSR_UCC (1UL << 42UL) /* ch,ch+,jp */ + +/* Uncorrectable E-cache ECC error for instruction fetch or data access + * other than block load. + */ +#define CHAFSR_UCU (1UL << 41UL) /* ch,ch+,jp */ + +/* Copyout HW Corrected ECC error */ +#define CHAFSR_CPC (1UL << 40UL) /* ch,ch+,jp */ + +/* Copyout Uncorrectable ECC error */ +#define CHAFSR_CPU (1UL << 39UL) /* ch,ch+,jp */ + +/* HW Corrected ECC error from E-cache for writeback */ +#define CHAFSR_WDC (1UL << 38UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from E-cache for writeback */ +#define CHAFSR_WDU (1UL << 37UL) /* ch,ch+,jp */ + +/* HW Corrected ECC error from E-cache for store merge or block load */ +#define CHAFSR_EDC (1UL << 36UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from E-cache for store merge or block load */ +#define CHAFSR_EDU (1UL << 35UL) /* ch,ch+,jp */ + +/* Uncorrectable system bus data ECC error for read of memory or I/O */ +#define CHAFSR_UE (1UL << 34UL) /* ch,ch+,jp */ + +/* HW Corrected system bus data ECC error for read of memory or I/O */ +#define CHAFSR_CE (1UL << 33UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from remote cache/memory */ +#define JPAFSR_RUE (1UL << 32UL) /* jp */ + +/* Correctable ECC error from remote cache/memory */ +#define JPAFSR_RCE (1UL << 31UL) /* jp */ + +/* JBUS parity error on returned read data */ +#define JPAFSR_BP (1UL << 30UL) /* jp */ + +/* JBUS parity error on data for writeback or block store */ +#define JPAFSR_WBP (1UL << 29UL) /* jp */ + +/* Foreign read to DRAM incurring correctable ECC error */ +#define JPAFSR_FRC (1UL << 28UL) /* jp */ + +/* Foreign read to DRAM incurring uncorrectable ECC error */ +#define JPAFSR_FRU (1UL << 27UL) /* jp */ + +#define CHAFSR_ERRORS (CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ + CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ + CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ + CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) +#define CHPAFSR_ERRORS (CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \ + CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \ + CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ + CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ + CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ + CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) +#define JPAFSR_ERRORS (JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \ + JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \ + CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \ + JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \ + CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \ + CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \ + CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \ + JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \ + JPAFSR_FRC | JPAFSR_FRU) + +/* Active JBUS request signal when error occurred */ +#define JPAFSR_JBREQ (0x7UL << 24UL) /* jp */ +#define JPAFSR_JBREQ_SHIFT 24UL + +/* L2 cache way information */ +#define JPAFSR_ETW (0x3UL << 22UL) /* jp */ +#define JPAFSR_ETW_SHIFT 22UL + +/* System bus MTAG ECC syndrome. This field captures the status of the + * first occurrence of the highest-priority error according to the M_SYND + * overwrite policy. After the AFSR sticky bit, corresponding to the error + * for which the M_SYND is reported, is cleared, the contents of the M_SYND + * field will be unchanged by will be unfrozen for further error capture. + */ +#define CHAFSR_M_SYNDROME (0xfUL << 16UL) /* ch,ch+,jp */ +#define CHAFSR_M_SYNDROME_SHIFT 16UL + +/* Agenid Id of the foreign device causing the UE/CE errors */ +#define JPAFSR_AID (0x1fUL << 9UL) /* jp */ +#define JPAFSR_AID_SHIFT 9UL + +/* System bus or E-cache data ECC syndrome. This field captures the status + * of the first occurrence of the highest-priority error according to the + * E_SYND overwrite policy. After the AFSR sticky bit, corresponding to the + * error for which the E_SYND is reported, is cleare, the contents of the E_SYND + * field will be unchanged but will be unfrozen for further error capture. + */ +#define CHAFSR_E_SYNDROME (0x1ffUL << 0UL) /* ch,ch+,jp */ +#define CHAFSR_E_SYNDROME_SHIFT 0UL + +/* The AFSR must be explicitly cleared by software, it is not cleared automatically + * by a read. Writes to bits <51:33> with bits set will clear the corresponding + * bits in the AFSR. Bits associated with disrupting traps must be cleared before + * interrupts are re-enabled to prevent multiple traps for the same error. I.e. + * PSTATE.IE and AFSR bits control delivery of disrupting traps. + * + * Since there is only one AFAR, when multiple events have been logged by the + * bits in the AFSR, at most one of these events will have its status captured + * in the AFAR. The highest priority of those event bits will get AFAR logging. + * The AFAR will be unlocked and available to capture the address of another event + * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is + * cleared. For example, if AFSR.CE is detected, then AFSR.UE (which overwrites + * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked + * and ready for another event, even though AFSR.CE is still set. The same rules + * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR. + */ + +#endif /* _SPARC64_CHAFSR_H */ diff --git a/include/asm-sparc/chmctrl.h b/include/asm-sparc/chmctrl.h new file mode 100644 index 00000000000..859b4a4b0d3 --- /dev/null +++ b/include/asm-sparc/chmctrl.h @@ -0,0 +1,183 @@ +#ifndef _SPARC64_CHMCTRL_H +#define _SPARC64_CHMCTRL_H + +/* Cheetah memory controller programmable registers. */ +#define CHMCTRL_TCTRL1 0x00 /* Memory Timing Control I */ +#define CHMCTRL_TCTRL2 0x08 /* Memory Timing Control II */ +#define CHMCTRL_TCTRL3 0x38 /* Memory Timing Control III */ +#define CHMCTRL_TCTRL4 0x40 /* Memory Timing Control IV */ +#define CHMCTRL_DECODE1 0x10 /* Memory Address Decode I */ +#define CHMCTRL_DECODE2 0x18 /* Memory Address Decode II */ +#define CHMCTRL_DECODE3 0x20 /* Memory Address Decode III */ +#define CHMCTRL_DECODE4 0x28 /* Memory Address Decode IV */ +#define CHMCTRL_MACTRL 0x30 /* Memory Address Control */ + +/* Memory Timing Control I */ +#define TCTRL1_SDRAMCTL_DLY 0xf000000000000000UL +#define TCTRL1_SDRAMCTL_DLY_SHIFT 60 +#define TCTRL1_SDRAMCLK_DLY 0x0e00000000000000UL +#define TCTRL1_SDRAMCLK_DLY_SHIFT 57 +#define TCTRL1_R 0x0100000000000000UL +#define TCTRL1_R_SHIFT 56 +#define TCTRL1_AUTORFR_CYCLE 0x00fe000000000000UL +#define TCTRL1_AUTORFR_CYCLE_SHIFT 49 +#define TCTRL1_RD_WAIT 0x0001f00000000000UL +#define TCTRL1_RD_WAIT_SHIFT 44 +#define TCTRL1_PC_CYCLE 0x00000fc000000000UL +#define TCTRL1_PC_CYCLE_SHIFT 38 +#define TCTRL1_WR_MORE_RAS_PW 0x0000003f00000000UL +#define TCTRL1_WR_MORE_RAS_PW_SHIFT 32 +#define TCTRL1_RD_MORE_RAW_PW 0x00000000fc000000UL +#define TCTRL1_RD_MORE_RAS_PW_SHIFT 26 +#define TCTRL1_ACT_WR_DLY 0x0000000003f00000UL +#define TCTRL1_ACT_WR_DLY_SHIFT 20 +#define TCTRL1_ACT_RD_DLY 0x00000000000fc000UL +#define TCTRL1_ACT_RD_DLY_SHIFT 14 +#define TCTRL1_BANK_PRESENT 0x0000000000003000UL +#define TCTRL1_BANK_PRESENT_SHIFT 12 +#define TCTRL1_RFR_INT 0x0000000000000ff8UL +#define TCTRL1_RFR_INT_SHIFT 3 +#define TCTRL1_SET_MODE_REG 0x0000000000000004UL +#define TCTRL1_SET_MODE_REG_SHIFT 2 +#define TCTRL1_RFR_ENABLE 0x0000000000000002UL +#define TCTRL1_RFR_ENABLE_SHIFT 1 +#define TCTRL1_PRECHG_ALL 0x0000000000000001UL +#define TCTRL1_PRECHG_ALL_SHIFT 0 + +/* Memory Timing Control II */ +#define TCTRL2_WR_MSEL_DLY 0xfc00000000000000UL +#define TCTRL2_WR_MSEL_DLY_SHIFT 58 +#define TCTRL2_RD_MSEL_DLY 0x03f0000000000000UL +#define TCTRL2_RD_MSEL_DLY_SHIFT 52 +#define TCTRL2_WRDATA_THLD 0x000c000000000000UL +#define TCTRL2_WRDATA_THLD_SHIFT 50 +#define TCTRL2_RDWR_RD_TI_DLY 0x0003f00000000000UL +#define TCTRL2_RDWR_RD_TI_DLY_SHIFT 44 +#define TCTRL2_AUTOPRECHG_ENBL 0x0000080000000000UL +#define TCTRL2_AUTOPRECHG_ENBL_SHIFT 43 +#define TCTRL2_RDWR_PI_MORE_DLY 0x000007c000000000UL +#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38 +#define TCTRL2_RDWR_1_DLY 0x0000003f00000000UL +#define TCTRL2_RDWR_1_DLY_SHIFT 32 +#define TCTRL2_WRWR_PI_MORE_DLY 0x00000000f8000000UL +#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27 +#define TCTRL2_WRWR_1_DLY 0x0000000007e00000UL +#define TCTRL2_WRWR_1_DLY_SHIFT 21 +#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL +#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16 +#define TCTRL2_R 0x0000000000008000UL +#define TCTRL2_R_SHIFT 15 +#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL +#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0 + +/* Memory Timing Control III */ +#define TCTRL3_SDRAM_CTL_DLY 0xf000000000000000UL +#define TCTRL3_SDRAM_CTL_DLY_SHIFT 60 +#define TCTRL3_SDRAM_CLK_DLY 0x0e00000000000000UL +#define TCTRL3_SDRAM_CLK_DLY_SHIFT 57 +#define TCTRL3_R 0x0100000000000000UL +#define TCTRL3_R_SHIFT 56 +#define TCTRL3_AUTO_RFR_CYCLE 0x00fe000000000000UL +#define TCTRL3_AUTO_RFR_CYCLE_SHIFT 49 +#define TCTRL3_RD_WAIT 0x0001f00000000000UL +#define TCTRL3_RD_WAIT_SHIFT 44 +#define TCTRL3_PC_CYCLE 0x00000fc000000000UL +#define TCTRL3_PC_CYCLE_SHIFT 38 +#define TCTRL3_WR_MORE_RAW_PW 0x0000003f00000000UL +#define TCTRL3_WR_MORE_RAW_PW_SHIFT 32 +#define TCTRL3_RD_MORE_RAW_PW 0x00000000fc000000UL +#define TCTRL3_RD_MORE_RAW_PW_SHIFT 26 +#define TCTRL3_ACT_WR_DLY 0x0000000003f00000UL +#define TCTRL3_ACT_WR_DLY_SHIFT 20 +#define TCTRL3_ACT_RD_DLY 0x00000000000fc000UL +#define TCTRL3_ACT_RD_DLY_SHIFT 14 +#define TCTRL3_BANK_PRESENT 0x0000000000003000UL +#define TCTRL3_BANK_PRESENT_SHIFT 12 +#define TCTRL3_RFR_INT 0x0000000000000ff8UL +#define TCTRL3_RFR_INT_SHIFT 3 +#define TCTRL3_SET_MODE_REG 0x0000000000000004UL +#define TCTRL3_SET_MODE_REG_SHIFT 2 +#define TCTRL3_RFR_ENABLE 0x0000000000000002UL +#define TCTRL3_RFR_ENABLE_SHIFT 1 +#define TCTRL3_PRECHG_ALL 0x0000000000000001UL +#define TCTRL3_PRECHG_ALL_SHIFT 0 + +/* Memory Timing Control IV */ +#define TCTRL4_WR_MSEL_DLY 0xfc00000000000000UL +#define TCTRL4_WR_MSEL_DLY_SHIFT 58 +#define TCTRL4_RD_MSEL_DLY 0x03f0000000000000UL +#define TCTRL4_RD_MSEL_DLY_SHIFT 52 +#define TCTRL4_WRDATA_THLD 0x000c000000000000UL +#define TCTRL4_WRDATA_THLD_SHIFT 50 +#define TCTRL4_RDWR_RD_RI_DLY 0x0003f00000000000UL +#define TCTRL4_RDWR_RD_RI_DLY_SHIFT 44 +#define TCTRL4_AUTO_PRECHG_ENBL 0x0000080000000000UL +#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43 +#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL +#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38 +#define TCTRL4_RD_WR_TI_DLY 0x0000003f00000000UL +#define TCTRL4_RD_WR_TI_DLY_SHIFT 32 +#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL +#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27 +#define TCTRL4_WR_WR_TI_DLY 0x0000000007e00000UL +#define TCTRL4_WR_WR_TI_DLY_SHIFT 21 +#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0 +#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16 +#define TCTRL4_R 0x0000000000008000UL +#define TCTRL4_R_SHIFT 15 +#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL +#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0 + +/* All 4 memory address decoding registers have the + * same layout. + */ +#define MEM_DECODE_VALID 0x8000000000000000UL /* Valid */ +#define MEM_DECODE_VALID_SHIFT 63 +#define MEM_DECODE_UK 0x001ffe0000000000UL /* Upper mask */ +#define MEM_DECODE_UK_SHIFT 41 +#define MEM_DECODE_UM 0x0000001ffff00000UL /* Upper match */ +#define MEM_DECODE_UM_SHIFT 20 +#define MEM_DECODE_LK 0x000000000003c000UL /* Lower mask */ +#define MEM_DECODE_LK_SHIFT 14 +#define MEM_DECODE_LM 0x0000000000000f00UL /* Lower match */ +#define MEM_DECODE_LM_SHIFT 8 + +#define PA_UPPER_BITS 0x000007fffc000000UL +#define PA_UPPER_BITS_SHIFT 26 +#define PA_LOWER_BITS 0x00000000000003c0UL +#define PA_LOWER_BITS_SHIFT 6 + +#define MACTRL_R0 0x8000000000000000UL +#define MACTRL_R0_SHIFT 63 +#define MACTRL_ADDR_LE_PW 0x7000000000000000UL +#define MACTRL_ADDR_LE_PW_SHIFT 60 +#define MACTRL_CMD_PW 0x0f00000000000000UL +#define MACTRL_CMD_PW_SHIFT 56 +#define MACTRL_HALF_MODE_WR_MSEL_DLY 0x00fc000000000000UL +#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50 +#define MACTRL_HALF_MODE_RD_MSEL_DLY 0x0003f00000000000UL +#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44 +#define MACTRL_HALF_MODE_SDRAM_CTL_DLY 0x00000f0000000000UL +#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40 +#define MACTRL_HALF_MODE_SDRAM_CLK_DLY 0x000000e000000000UL +#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37 +#define MACTRL_R1 0x0000001000000000UL +#define MACTRL_R1_SHIFT 36 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32 +#define MACTRL_ENC_INTLV_B3 0x00000000f8000000UL +#define MACTRL_ENC_INTLV_B3_SHIFT 27 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23 +#define MACTRL_ENC_INTLV_B2 0x00000000007c0000UL +#define MACTRL_ENC_INTLV_B2_SHIFT 18 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14 +#define MACTRL_ENC_INTLV_B1 0x0000000000003e00UL +#define MACTRL_ENC_INTLV_B1_SHIFT 9 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT 5 +#define MACTRL_ENC_INTLV_B0 0x000000000000001fUL +#define MACTRL_ENC_INTLV_B0_SHIFT 0 + +#endif /* _SPARC64_CHMCTRL_H */ diff --git a/include/asm-sparc/cmt.h b/include/asm-sparc/cmt.h new file mode 100644 index 00000000000..870db592857 --- /dev/null +++ b/include/asm-sparc/cmt.h @@ -0,0 +1,59 @@ +#ifndef _SPARC64_CMT_H +#define _SPARC64_CMT_H + +/* cmt.h: Chip Multi-Threading register definitions + * + * Copyright (C) 2004 David S. Miller (davem@redhat.com) + */ + +/* ASI_CORE_ID - private */ +#define LP_ID 0x0000000000000010UL +#define LP_ID_MAX 0x00000000003f0000UL +#define LP_ID_ID 0x000000000000003fUL + +/* ASI_INTR_ID - private */ +#define LP_INTR_ID 0x0000000000000000UL +#define LP_INTR_ID_ID 0x00000000000003ffUL + +/* ASI_CESR_ID - private */ +#define CESR_ID 0x0000000000000040UL +#define CESR_ID_ID 0x00000000000000ffUL + +/* ASI_CORE_AVAILABLE - shared */ +#define LP_AVAIL 0x0000000000000000UL +#define LP_AVAIL_1 0x0000000000000002UL +#define LP_AVAIL_0 0x0000000000000001UL + +/* ASI_CORE_ENABLE_STATUS - shared */ +#define LP_ENAB_STAT 0x0000000000000010UL +#define LP_ENAB_STAT_1 0x0000000000000002UL +#define LP_ENAB_STAT_0 0x0000000000000001UL + +/* ASI_CORE_ENABLE - shared */ +#define LP_ENAB 0x0000000000000020UL +#define LP_ENAB_1 0x0000000000000002UL +#define LP_ENAB_0 0x0000000000000001UL + +/* ASI_CORE_RUNNING - shared */ +#define LP_RUNNING_RW 0x0000000000000050UL +#define LP_RUNNING_W1S 0x0000000000000060UL +#define LP_RUNNING_W1C 0x0000000000000068UL +#define LP_RUNNING_1 0x0000000000000002UL +#define LP_RUNNING_0 0x0000000000000001UL + +/* ASI_CORE_RUNNING_STAT - shared */ +#define LP_RUN_STAT 0x0000000000000058UL +#define LP_RUN_STAT_1 0x0000000000000002UL +#define LP_RUN_STAT_0 0x0000000000000001UL + +/* ASI_XIR_STEERING - shared */ +#define LP_XIR_STEER 0x0000000000000030UL +#define LP_XIR_STEER_1 0x0000000000000002UL +#define LP_XIR_STEER_0 0x0000000000000001UL + +/* ASI_CMT_ERROR_STEERING - shared */ +#define CMT_ER_STEER 0x0000000000000040UL +#define CMT_ER_STEER_1 0x0000000000000002UL +#define CMT_ER_STEER_0 0x0000000000000001UL + +#endif /* _SPARC64_CMT_H */ diff --git a/include/asm-sparc/compat.h b/include/asm-sparc/compat.h new file mode 100644 index 00000000000..f260b58f5ce --- /dev/null +++ b/include/asm-sparc/compat.h @@ -0,0 +1,243 @@ +#ifndef _ASM_SPARC64_COMPAT_H +#define _ASM_SPARC64_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include <linux/types.h> + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u16 __compat_uid_t; +typedef u16 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u16 compat_mode_t; +typedef u32 compat_ino_t; +typedef u16 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_time_t st_atime; + compat_ulong_t st_atime_nsec; + compat_time_t st_mtime; + compat_ulong_t st_mtime_nsec; + compat_time_t st_ctime; + compat_ulong_t st_ctime_nsec; + compat_off_t st_blksize; + compat_off_t st_blocks; + u32 __unused4[2]; +}; + +struct compat_stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + + unsigned char __pad3[8]; + + long long st_size; + unsigned int st_blksize; + + unsigned char __pad4[8]; + unsigned int st_blocks; + + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int __unused4; + unsigned int __unused5; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; + short __unused; +}; + +#define F_GETLK64 12 +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; + short __unused; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_INFINITY 0x7fffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current_thread_info()->kregs; + unsigned long usp = regs->u_regs[UREG_I6]; + + if (!(test_thread_flag(TIF_32BIT))) + usp += STACK_BIAS; + else + usp &= 0xffffffffUL; + + usp -= len; + usp &= ~0x7UL; + + return (void __user *) usp; +} + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + unsigned short __pad1; + compat_mode_t mode; + unsigned short __pad2; + unsigned short seq; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int __pad1; + compat_time_t sem_otime; + unsigned int __pad2; + compat_time_t sem_ctime; + u32 sem_nsems; + u32 __unused1; + u32 __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int __pad1; + compat_time_t msg_stime; + unsigned int __pad2; + compat_time_t msg_rtime; + unsigned int __pad3; + compat_time_t msg_ctime; + unsigned int msg_cbytes; + unsigned int msg_qnum; + unsigned int msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + unsigned int __unused1; + unsigned int __unused2; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int __pad1; + compat_time_t shm_atime; + unsigned int __pad2; + compat_time_t shm_dtime; + unsigned int __pad3; + compat_time_t shm_ctime; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + unsigned int shm_nattch; + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _ASM_SPARC64_COMPAT_H */ diff --git a/include/asm-sparc/compat_signal.h b/include/asm-sparc/compat_signal.h new file mode 100644 index 00000000000..b759eab9b51 --- /dev/null +++ b/include/asm-sparc/compat_signal.h @@ -0,0 +1,29 @@ +#ifndef _COMPAT_SIGNAL_H +#define _COMPAT_SIGNAL_H + +#include <linux/compat.h> +#include <asm/signal.h> + +#ifdef CONFIG_COMPAT +struct __new_sigaction32 { + unsigned sa_handler; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ + compat_sigset_t sa_mask; +}; + +struct __old_sigaction32 { + unsigned sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ +}; + +typedef struct sigaltstack32 { + u32 ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_t32; +#endif + +#endif /* !(_COMPAT_SIGNAL_H) */ diff --git a/include/asm-sparc/dcr.h b/include/asm-sparc/dcr.h new file mode 100644 index 00000000000..620c9ba642e --- /dev/null +++ b/include/asm-sparc/dcr.h @@ -0,0 +1,14 @@ +#ifndef _SPARC64_DCR_H +#define _SPARC64_DCR_H + +/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */ +#define DCR_DPE 0x0000000000001000 /* III+: D$ Parity Error Enable */ +#define DCR_OBS 0x0000000000000fc0 /* Observability Bus Controls */ +#define DCR_BPE 0x0000000000000020 /* Branch Predict Enable */ +#define DCR_RPE 0x0000000000000010 /* Return Address Prediction Enable */ +#define DCR_SI 0x0000000000000008 /* Single Instruction Disable */ +#define DCR_IPE 0x0000000000000004 /* III+: I$ Parity Error Enable */ +#define DCR_IFPOE 0x0000000000000002 /* IRQ FP Operation Enable */ +#define DCR_MS 0x0000000000000001 /* Multi-Scalar dispatch */ + +#endif /* _SPARC64_DCR_H */ diff --git a/include/asm-sparc/dcu.h b/include/asm-sparc/dcu.h new file mode 100644 index 00000000000..0f704e106a1 --- /dev/null +++ b/include/asm-sparc/dcu.h @@ -0,0 +1,27 @@ +#ifndef _SPARC64_DCU_H +#define _SPARC64_DCU_H + +#include <linux/const.h> + +/* UltraSparc-III Data Cache Unit Control Register */ +#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */ +#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */ +#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */ +#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */ +#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */ +#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */ +#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */ +#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/ +#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */ +#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */ +#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */ +#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */ +#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/ +#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */ +#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/ +#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */ +#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */ +#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */ +#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */ + +#endif /* _SPARC64_DCU_H */ diff --git a/include/asm-sparc/estate.h b/include/asm-sparc/estate.h new file mode 100644 index 00000000000..520c08560d1 --- /dev/null +++ b/include/asm-sparc/estate.h @@ -0,0 +1,49 @@ +#ifndef _SPARC64_ESTATE_H +#define _SPARC64_ESTATE_H + +/* UltraSPARC-III E-cache Error Enable */ +#define ESTATE_ERROR_FMT 0x0000000000040000 /* Force MTAG ECC */ +#define ESTATE_ERROR_FMESS 0x000000000003c000 /* Forced MTAG ECC val */ +#define ESTATE_ERROR_FMD 0x0000000000002000 /* Force DATA ECC */ +#define ESTATE_ERROR_FDECC 0x0000000000001ff0 /* Forced DATA ECC val */ +#define ESTATE_ERROR_UCEEN 0x0000000000000008 /* See below */ +#define ESTATE_ERROR_NCEEN 0x0000000000000002 /* See below */ +#define ESTATE_ERROR_CEEN 0x0000000000000001 /* See below */ + +/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache + * errors 2) uncorrectable E-cache errors. Such events only occur on reads + * of the E-cache by the local processor for: 1) data loads 2) instruction + * fetches 3) atomic operations. Such events _cannot_ occur for: 1) merge + * 2) writeback 2) copyout. The AFSR bits associated with these traps are + * UCC and UCU. + */ + +/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps + * for uncorrectable ECC errors and system errors. + * + * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT, + * or system bus BusERR: + * 1) As the result of an instruction fetch, will generate instruction_access_error + * 2) As the result of a load etc. will generate data_access_error. + * 3) As the result of store merge completion, writeback, or copyout will + * generate a disrupting ECC_error trap. + * 4) As the result of such errors on instruction vector fetch can generate any + * of the 3 trap types. + * + * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE, + * BERR, and TO. + */ + +/* CEEN enables the ECC_error trap for hardware corrected ECC errors. System bus + * reads resulting in a hardware corrected data or MTAG ECC error will generate an + * ECC_error disrupting trap with this bit enabled. + * + * This same trap will also be generated when a hardware corrected ECC error results + * during store merge, writeback, and copyout operations. + */ + +/* In general, if the trap enable bits above are disabled the AFSR bits will still + * log the events even though the trap will not be generated by the processor. + */ + +#endif /* _SPARC64_ESTATE_H */ diff --git a/include/asm-sparc/fhc.h b/include/asm-sparc/fhc.h new file mode 100644 index 00000000000..788cbc46a11 --- /dev/null +++ b/include/asm-sparc/fhc.h @@ -0,0 +1,121 @@ +/* + * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire. + * + * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com) + */ + +#ifndef _SPARC64_FHC_H +#define _SPARC64_FHC_H + +#include <linux/timer.h> + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/upa.h> + +struct linux_fhc; + +/* Clock board register offsets. */ +#define CLOCK_CTRL 0x00UL /* Main control */ +#define CLOCK_STAT1 0x10UL /* Status one */ +#define CLOCK_STAT2 0x20UL /* Status two */ +#define CLOCK_PWRSTAT 0x30UL /* Power status */ +#define CLOCK_PWRPRES 0x40UL /* Power presence */ +#define CLOCK_TEMP 0x50UL /* Temperature */ +#define CLOCK_IRQDIAG 0x60UL /* IRQ diagnostics */ +#define CLOCK_PWRSTAT2 0x70UL /* Power status two */ + +#define CLOCK_CTRL_LLED 0x04 /* Left LED, 0 == on */ +#define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */ +#define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */ + +struct linux_central { + struct linux_fhc *child; + unsigned long cfreg; + unsigned long clkregs; + unsigned long clkver; + int slots; + struct device_node *prom_node; + + struct linux_prom_ranges central_ranges[PROMREG_MAX]; + int num_central_ranges; +}; + +/* Firehose controller register offsets */ +struct fhc_regs { + unsigned long pregs; /* FHC internal regs */ +#define FHC_PREGS_ID 0x00UL /* FHC ID */ +#define FHC_ID_VERS 0xf0000000 /* Version of this FHC */ +#define FHC_ID_PARTID 0x0ffff000 /* Part ID code (0x0f9f == FHC) */ +#define FHC_ID_MANUF 0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/ +#define FHC_ID_RESV 0x00000001 /* Read as one */ +#define FHC_PREGS_RCS 0x10UL /* FHC Reset Control/Status Register */ +#define FHC_RCS_POR 0x80000000 /* Last reset was a power cycle */ +#define FHC_RCS_SPOR 0x40000000 /* Last reset was sw power on reset */ +#define FHC_RCS_SXIR 0x20000000 /* Last reset was sw XIR reset */ +#define FHC_RCS_BPOR 0x10000000 /* Last reset was due to POR button */ +#define FHC_RCS_BXIR 0x08000000 /* Last reset was due to XIR button */ +#define FHC_RCS_WEVENT 0x04000000 /* CPU reset was due to wakeup event */ +#define FHC_RCS_CFATAL 0x02000000 /* Centerplane Fatal Error signalled */ +#define FHC_RCS_FENAB 0x01000000 /* Fatal errors elicit system reset */ +#define FHC_PREGS_CTRL 0x20UL /* FHC Control Register */ +#define FHC_CONTROL_ICS 0x00100000 /* Ignore Centerplane Signals */ +#define FHC_CONTROL_FRST 0x00080000 /* Fatal Error Reset Enable */ +#define FHC_CONTROL_LFAT 0x00040000 /* AC/DC signalled a local error */ +#define FHC_CONTROL_SLINE 0x00010000 /* Firmware Synchronization Line */ +#define FHC_CONTROL_DCD 0x00008000 /* DC-->DC Converter Disable */ +#define FHC_CONTROL_POFF 0x00004000 /* AC/DC Controller PLL Disable */ +#define FHC_CONTROL_FOFF 0x00002000 /* FHC Controller PLL Disable */ +#define FHC_CONTROL_AOFF 0x00001000 /* CPU A SRAM/SBD Low Power Mode */ +#define FHC_CONTROL_BOFF 0x00000800 /* CPU B SRAM/SBD Low Power Mode */ +#define FHC_CONTROL_PSOFF 0x00000400 /* Turns off this FHC's power supply */ +#define FHC_CONTROL_IXIST 0x00000200 /* 0=FHC tells clock board it exists */ +#define FHC_CONTROL_XMSTR 0x00000100 /* 1=Causes this FHC to be XIR master*/ +#define FHC_CONTROL_LLED 0x00000040 /* 0=Left LED ON */ +#define FHC_CONTROL_MLED 0x00000020 /* 1=Middle LED ON */ +#define FHC_CONTROL_RLED 0x00000010 /* 1=Right LED */ +#define FHC_CONTROL_BPINS 0x00000003 /* Spare Bidirectional Pins */ +#define FHC_PREGS_BSR 0x30UL /* FHC Board Status Register */ +#define FHC_BSR_DA64 0x00040000 /* Port A: 0=128bit 1=64bit data path */ +#define FHC_BSR_DB64 0x00020000 /* Port B: 0=128bit 1=64bit data path */ +#define FHC_BSR_BID 0x0001e000 /* Board ID */ +#define FHC_BSR_SA 0x00001c00 /* Port A UPA Speed (from the pins) */ +#define FHC_BSR_SB 0x00000380 /* Port B UPA Speed (from the pins) */ +#define FHC_BSR_NDIAG 0x00000040 /* Not in Diag Mode */ +#define FHC_BSR_NTBED 0x00000020 /* Not in TestBED Mode */ +#define FHC_BSR_NIA 0x0000001c /* Jumper, bit 18 in PROM space */ +#define FHC_BSR_SI 0x00000001 /* Spare input pin value */ +#define FHC_PREGS_ECC 0x40UL /* FHC ECC Control Register (16 bits) */ +#define FHC_PREGS_JCTRL 0xf0UL /* FHC JTAG Control Register */ +#define FHC_JTAG_CTRL_MENAB 0x80000000 /* Indicates this is JTAG Master */ +#define FHC_JTAG_CTRL_MNONE 0x40000000 /* Indicates no JTAG Master present */ +#define FHC_PREGS_JCMD 0x100UL /* FHC JTAG Command Register */ + unsigned long ireg; /* FHC IGN reg */ +#define FHC_IREG_IGN 0x00UL /* This FHC's IGN */ + unsigned long ffregs; /* FHC fanfail regs */ +#define FHC_FFREGS_IMAP 0x00UL /* FHC Fanfail IMAP */ +#define FHC_FFREGS_ICLR 0x10UL /* FHC Fanfail ICLR */ + unsigned long sregs; /* FHC system regs */ +#define FHC_SREGS_IMAP 0x00UL /* FHC System IMAP */ +#define FHC_SREGS_ICLR 0x10UL /* FHC System ICLR */ + unsigned long uregs; /* FHC uart regs */ +#define FHC_UREGS_IMAP 0x00UL /* FHC Uart IMAP */ +#define FHC_UREGS_ICLR 0x10UL /* FHC Uart ICLR */ + unsigned long tregs; /* FHC TOD regs */ +#define FHC_TREGS_IMAP 0x00UL /* FHC TOD IMAP */ +#define FHC_TREGS_ICLR 0x10UL /* FHC TOD ICLR */ +}; + +struct linux_fhc { + struct linux_fhc *next; + struct linux_central *parent; /* NULL if not central FHC */ + struct fhc_regs fhc_regs; + int board; + int jtag_master; + struct device_node *prom_node; + + struct linux_prom_ranges fhc_ranges[PROMREG_MAX]; + int num_fhc_ranges; +}; + +#endif /* !(_SPARC64_FHC_H) */ diff --git a/include/asm-sparc/fpumacro.h b/include/asm-sparc/fpumacro.h new file mode 100644 index 00000000000..cc463fec806 --- /dev/null +++ b/include/asm-sparc/fpumacro.h @@ -0,0 +1,33 @@ +/* fpumacro.h: FPU related macros. + * + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC64_FPUMACRO_H +#define _SPARC64_FPUMACRO_H + +#include <asm/asi.h> +#include <asm/visasm.h> + +struct fpustate { + u32 regs[64]; +}; + +#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs) + +static inline unsigned long fprs_read(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%fprs, %0" : "=r" (retval)); + + return retval; +} + +static inline void fprs_write(unsigned long val) +{ + __asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val)); +} + +#endif /* !(_SPARC64_FPUMACRO_H) */ diff --git a/include/asm-sparc/hugetlb.h b/include/asm-sparc/hugetlb.h new file mode 100644 index 00000000000..412af58926a --- /dev/null +++ b/include/asm-sparc/hugetlb.h @@ -0,0 +1,84 @@ +#ifndef _ASM_SPARC64_HUGETLB_H +#define _ASM_SPARC64_HUGETLB_H + +#include <asm/page.h> + + +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + +void hugetlb_prefault_arch_hook(struct mm_struct *mm); + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) { + return 0; +} + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_SPARC64_HUGETLB_H */ diff --git a/include/asm-sparc/hvtramp.h b/include/asm-sparc/hvtramp.h new file mode 100644 index 00000000000..b2b9b947b3a --- /dev/null +++ b/include/asm-sparc/hvtramp.h @@ -0,0 +1,37 @@ +#ifndef _SPARC64_HVTRAP_H +#define _SPARC64_HVTRAP_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +struct hvtramp_mapping { + __u64 vaddr; + __u64 tte; +}; + +struct hvtramp_descr { + __u32 cpu; + __u32 num_mappings; + __u64 fault_info_va; + __u64 fault_info_pa; + __u64 thread_reg; + struct hvtramp_mapping maps[1]; +}; + +extern void hv_cpu_startup(unsigned long hvdescr_pa); + +#endif + +#define HVTRAMP_DESCR_CPU 0x00 +#define HVTRAMP_DESCR_NUM_MAPPINGS 0x04 +#define HVTRAMP_DESCR_FAULT_INFO_VA 0x08 +#define HVTRAMP_DESCR_FAULT_INFO_PA 0x10 +#define HVTRAMP_DESCR_THREAD_REG 0x18 +#define HVTRAMP_DESCR_MAPS 0x20 + +#define HVTRAMP_MAPPING_VADDR 0x00 +#define HVTRAMP_MAPPING_TTE 0x08 +#define HVTRAMP_MAPPING_SIZE 0x10 + +#endif /* _SPARC64_HVTRAP_H */ diff --git a/include/asm-sparc/hypervisor.h b/include/asm-sparc/hypervisor.h new file mode 100644 index 00000000000..0c0f41cf746 --- /dev/null +++ b/include/asm-sparc/hypervisor.h @@ -0,0 +1,2945 @@ +#ifndef _SPARC64_HYPERVISOR_H +#define _SPARC64_HYPERVISOR_H + +/* Sun4v hypervisor interfaces and defines. + * + * Hypervisor calls are made via traps to software traps number 0x80 + * and above. Registers %o0 to %o5 serve as argument, status, and + * return value registers. + * + * There are two kinds of these traps. First there are the normal + * "fast traps" which use software trap 0x80 and encode the function + * to invoke by number in register %o5. Argument and return value + * handling is as follows: + * + * ----------------------------------------------- + * | %o5 | function number | undefined | + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * The second type are "hyper-fast traps" which encode the function + * number in the software trap number itself. So these use trap + * numbers > 0x80. The register usage for hyper-fast traps is as + * follows: + * + * ----------------------------------------------- + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * Registers providing explicit arguments to the hypervisor calls + * are volatile across the call. Upon return their values are + * undefined unless explicitly specified as containing a particular + * return value by the specific call. The return status is always + * returned in register %o0, zero indicates a successful execution of + * the hypervisor call and other values indicate an error status as + * defined below. So, for example, if a hyper-fast trap takes + * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across + * the call and %o3, %o4, and %o5 would be preserved. + * + * If the hypervisor trap is invalid, or the fast trap function number + * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits + * of the argument and return values are significant. + */ + +/* Trap numbers. */ +#define HV_FAST_TRAP 0x80 +#define HV_MMU_MAP_ADDR_TRAP 0x83 +#define HV_MMU_UNMAP_ADDR_TRAP 0x84 +#define HV_TTRACE_ADDENTRY_TRAP 0x85 +#define HV_CORE_TRAP 0xff + +/* Error codes. */ +#define HV_EOK 0 /* Successful return */ +#define HV_ENOCPU 1 /* Invalid CPU id */ +#define HV_ENORADDR 2 /* Invalid real address */ +#define HV_ENOINTR 3 /* Invalid interrupt id */ +#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ +#define HV_EBADTSB 5 /* Invalid TSB description */ +#define HV_EINVAL 6 /* Invalid argument */ +#define HV_EBADTRAP 7 /* Invalid function number */ +#define HV_EBADALIGN 8 /* Invalid address alignment */ +#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ +#define HV_ENOACCESS 10 /* No access to resource */ +#define HV_EIO 11 /* I/O error */ +#define HV_ECPUERROR 12 /* CPU in error state */ +#define HV_ENOTSUPPORTED 13 /* Function not supported */ +#define HV_ENOMAP 14 /* No mapping found */ +#define HV_ETOOMANY 15 /* Too many items specified */ +#define HV_ECHANNEL 16 /* Invalid LDC channel */ +#define HV_EBUSY 17 /* Resource busy */ + +/* mach_exit() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_EXIT + * ARG0: exit code + * ERRORS: This service does not return. + * + * Stop all CPUs in the virtual domain and place them into the stopped + * state. The 64-bit exit code may be passed to a service entity as + * the domain's exit status. On systems without a service entity, the + * domain will undergo a reset, and the boot firmware will be + * reloaded. + * + * This function will never return to the guest that invokes it. + * + * Note: By convention an exit code of zero denotes a successful exit by + * the guest code. A non-zero exit code denotes a guest specific + * error indication. + * + */ +#define HV_FAST_MACH_EXIT 0x00 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_exit(unsigned long exit_code); +#endif + +/* Domain services. */ + +/* mach_desc() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_DESC + * ARG0: buffer + * ARG1: length + * RET0: status + * RET1: length + * ERRORS: HV_EBADALIGN Buffer is badly aligned + * HV_ENORADDR Buffer is to an illegal real address. + * HV_EINVAL Buffer length is too small for complete + * machine description. + * + * Copy the most current machine description into the buffer indicated + * by the real address in ARG0. The buffer provided must be 16 byte + * aligned. Upon success or HV_EINVAL, this service returns the + * actual size of the machine description in the RET1 return value. + * + * Note: A method of determining the appropriate buffer size for the + * machine description is to first call this service with a buffer + * length of 0 bytes. + */ +#define HV_FAST_MACH_DESC 0x01 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, + unsigned long buf_len, + unsigned long *real_buf_len); +#endif + +/* mach_sir() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SIR + * ERRORS: This service does not return. + * + * Perform a software initiated reset of the virtual machine domain. + * All CPUs are captured as soon as possible, all hardware devices are + * returned to the entry default state, and the domain is restarted at + * the SIR (trap type 0x04) real trap table (RTBA) entry point on one + * of the CPUs. The single CPU restarted is selected as determined by + * platform specific policy. Memory is preserved across this + * operation. + */ +#define HV_FAST_MACH_SIR 0x02 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_sir(void); +#endif + +/* mach_set_watchdog() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_WATCHDOG + * ARG0: timeout in milliseconds + * RET0: status + * RET1: time remaining in milliseconds + * + * A guest uses this API to set a watchdog timer. Once the gues has set + * the timer, it must call the timer service again either to disable or + * postpone the expiration. If the timer expires before being reset or + * disabled, then the hypervisor take a platform specific action leading + * to guest termination within a bounded time period. The platform action + * may include recovery actions such as reporting the expiration to a + * Service Processor, and/or automatically restarting the gues. + * + * The 'timeout' parameter is specified in milliseconds, however the + * implementated granularity is given by the 'watchdog-resolution' + * property in the 'platform' node of the guest's machine description. + * The largest allowed timeout value is specified by the + * 'watchdog-max-timeout' property of the 'platform' node. + * + * If the 'timeout' argument is not zero, the watchdog timer is set to + * expire after a minimum of 'timeout' milliseconds. + * + * If the 'timeout' argument is zero, the watchdog timer is disabled. + * + * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' + * property, the hypervisor leaves the watchdog timer state unchanged, + * and returns a status of EINVAL. + * + * The 'time remaining' return value is valid regardless of whether the + * return status is EOK or EINVAL. A non-zero return value indicates the + * number of milliseconds that were remaining until the timer was to expire. + * If less than one millisecond remains, the return value is '1'. If the + * watchdog timer was disabled at the time of the call, the return value is + * zero. + * + * If the hypervisor cannot support the exact timeout value requested, but + * can support a larger timeout value, the hypervisor may round the actual + * timeout to a value larger than the requested timeout, consequently the + * 'time remaining' return value may be larger than the previously requested + * timeout value. + * + * Any guest OS debugger should be aware that the watchdog service may be in + * use. Consequently, it is recommended that the watchdog service is + * disabled upon debugger entry (e.g. reaching a breakpoint), and then + * re-enabled upon returning to normal execution. The API has been designed + * with this in mind, and the 'time remaining' result of the disable call may + * be used directly as the timeout argument of the re-enable call. + */ +#define HV_FAST_MACH_SET_WATCHDOG 0x05 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, + unsigned long *orig_timeout); +#endif + +/* CPU services. + * + * CPUs represent devices that can execute software threads. A single + * chip that contains multiple cores or strands is represented as + * multiple CPUs with unique CPU identifiers. CPUs are exported to + * OBP via the machine description (and to the OS via the OBP device + * tree). CPUs are always in one of three states: stopped, running, + * or error. + * + * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a + * CPU within a logical domain. Operations that are to be performed + * on multiple CPUs specify them via a CPU list. A CPU list is an + * array in real memory, of which each 16-bit word is a CPU ID. CPU + * lists are passed through the API as two arguments. The first is + * the number of entries (16-bit words) in the CPU list, and the + * second is the (real address) pointer to the CPU ID list. + */ + +/* cpu_start() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_START + * ARG0: CPU ID + * ARG1: PC + * ARG2: RTBA + * ARG3: target ARG0 + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is not in the stopped state + * ENORADDR Invalid PC or RTBA real address + * EBADALIGN Unaligned PC or unaligned RTBA + * EWOULDBLOCK Starting resources are not available + * + * Start CPU with given CPU ID with PC in %pc and with a real trap + * base address value of RTBA. The indicated CPU must be in the + * stopped state. The supplied RTBA must be aligned on a 256 byte + * boundary. On successful completion, the specified CPU will be in + * the running state and will be supplied with "target ARG0" in %o0 + * and RTBA in %tba. + */ +#define HV_FAST_CPU_START 0x10 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_start(unsigned long cpuid, + unsigned long pc, + unsigned long rtba, + unsigned long arg0); +#endif + +/* cpu_stop() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STOP + * ARG0: CPU ID + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is the current cpu + * EINVAL Target CPU ID is not in the running state + * EWOULDBLOCK Stopping resources are not available + * ENOTSUPPORTED Not supported on this platform + * + * The specified CPU is stopped. The indicated CPU must be in the + * running state. On completion, it will be in the stopped state. It + * is not legal to stop the current CPU. + * + * Note: As this service cannot be used to stop the current cpu, this service + * may not be used to stop the last running CPU in a domain. To stop + * and exit a running domain, a guest must use the mach_exit() service. + */ +#define HV_FAST_CPU_STOP 0x11 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_stop(unsigned long cpuid); +#endif + +/* cpu_yield() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_YIELD + * RET0: status + * ERRORS: No possible error. + * + * Suspend execution on the current CPU. Execution will resume when + * an interrupt (device, %stick_compare, or cross-call) is targeted to + * the CPU. On some CPUs, this API may be used by the hypervisor to + * save power by disabling hardware strands. + */ +#define HV_FAST_CPU_YIELD 0x12 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_yield(void); +#endif + +/* cpu_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QCONF + * ARG0: queue + * ARG1: base real address + * ARG2: number of entries + * RET0: status + * ERRORS: ENORADDR Invalid base real address + * EINVAL Invalid queue or number of entries is less + * than 2 or too large. + * EBADALIGN Base real address is not correctly aligned + * for size. + * + * Configure the given queue to be placed at the given base real + * address, with the given number of entries. The number of entries + * must be a power of 2. The base real address must be aligned + * exactly to match the queue size. Each queue entry is 64 bytes + * long, so for example a 32 entry queue must be aligned on a 2048 + * byte real address boundary. + * + * The specified queue is unconfigured if the number of entries is given + * as zero. + * + * For the current version of this API service, the argument queue is defined + * as follows: + * + * queue description + * ----- ------------------------- + * 0x3c cpu mondo queue + * 0x3d device mondo queue + * 0x3e resumable error queue + * 0x3f non-resumable error queue + * + * Note: The maximum number of entries for each queue for a specific cpu may + * be determined from the machine description. + */ +#define HV_FAST_CPU_QCONF 0x14 +#define HV_CPU_QUEUE_CPU_MONDO 0x3c +#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d +#define HV_CPU_QUEUE_RES_ERROR 0x3e +#define HV_CPU_QUEUE_NONRES_ERROR 0x3f + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_qconf(unsigned long type, + unsigned long queue_paddr, + unsigned long num_queue_entries); +#endif + +/* cpu_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QINFO + * ARG0: queue + * RET0: status + * RET1: base real address + * RET1: number of entries + * ERRORS: EINVAL Invalid queue + * + * Return the configuration info for the given queue. The base real + * address and number of entries of the defined queue are returned. + * The queue argument values are the same as for cpu_qconf() above. + * + * If the specified queue is a valid queue number, but no queue has + * been defined, the number of entries will be set to zero and the + * base real address returned is undefined. + */ +#define HV_FAST_CPU_QINFO 0x15 + +/* cpu_mondo_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MONDO_SEND + * ARG0-1: CPU list + * ARG2: data real address + * RET0: status + * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list + * is not 2-byte aligned. + * ENORADDR Invalid data mondo address, or invalid cpu list + * address. + * ENOCPU Invalid cpu in CPU list + * EWOULDBLOCK Some or all of the listed CPUs did not receive + * the mondo + * ECPUERROR One or more of the listed CPUs are in error + * state, use HV_FAST_CPU_STATE to see which ones + * EINVAL CPU list includes caller's CPU ID + * + * Send a mondo interrupt to the CPUs in the given CPU list with the + * 64-bytes at the given data real address. The data must be 64-byte + * aligned. The mondo data will be delivered to the cpu_mondo queues + * of the recipient CPUs. + * + * In all cases, error or not, the CPUs in the CPU list to which the + * mondo has been successfully delivered will be indicated by having + * their entry in CPU list updated with the value 0xffff. + */ +#define HV_FAST_CPU_MONDO_SEND 0x42 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); +#endif + +/* cpu_myid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MYID + * RET0: status + * RET1: CPU ID + * ERRORS: No errors defined. + * + * Return the hypervisor ID handle for the current CPU. Use by a + * virtual CPU to discover it's own identity. + */ +#define HV_FAST_CPU_MYID 0x16 + +/* cpu_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STATE + * ARG0: CPU ID + * RET0: status + * RET1: state + * ERRORS: ENOCPU Invalid CPU ID + * + * Retrieve the current state of the CPU with the given CPU ID. + */ +#define HV_FAST_CPU_STATE 0x17 +#define HV_CPU_STATE_STOPPED 0x01 +#define HV_CPU_STATE_RUNNING 0x02 +#define HV_CPU_STATE_ERROR 0x03 + +#ifndef __ASSEMBLY__ +extern long sun4v_cpu_state(unsigned long cpuid); +#endif + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_SET_RTBA + * ARG0: RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: ENORADDR Invalid RTBA real address + * EBADALIGN RTBA is incorrectly aligned for a trap table + * + * Set the real trap base address of the local cpu to the given RTBA. + * The supplied RTBA must be aligned on a 256 byte boundary. Upon + * success the previous value of the RTBA is returned in RET1. + * + * Note: This service does not affect %tba + */ +#define HV_FAST_CPU_SET_RTBA 0x18 + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_GET_RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: No possible error. + * + * Returns the current value of RTBA in RET1. + */ +#define HV_FAST_CPU_GET_RTBA 0x19 + +/* MMU services. + * + * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. + */ +#ifndef __ASSEMBLY__ +struct hv_tsb_descr { + unsigned short pgsz_idx; + unsigned short assoc; + unsigned int num_ttes; /* in TTEs */ + unsigned int ctx_idx; + unsigned int pgsz_mask; + unsigned long tsb_base; + unsigned long resv; +}; +#endif +#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 +#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 +#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 +#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 +#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c +#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 +#define HV_TSB_DESCR_RESV_OFFSET 0x18 + +/* Page size bitmask. */ +#define HV_PGSZ_MASK_8K (1 << 0) +#define HV_PGSZ_MASK_64K (1 << 1) +#define HV_PGSZ_MASK_512K (1 << 2) +#define HV_PGSZ_MASK_4MB (1 << 3) +#define HV_PGSZ_MASK_32MB (1 << 4) +#define HV_PGSZ_MASK_256MB (1 << 5) +#define HV_PGSZ_MASK_2GB (1 << 6) +#define HV_PGSZ_MASK_16GB (1 << 7) + +/* Page size index. The value given in the TSB descriptor must correspond + * to the smallest page size specified in the pgsz_mask page size bitmask. + */ +#define HV_PGSZ_IDX_8K 0 +#define HV_PGSZ_IDX_64K 1 +#define HV_PGSZ_IDX_512K 2 +#define HV_PGSZ_IDX_4MB 3 +#define HV_PGSZ_IDX_32MB 4 +#define HV_PGSZ_IDX_256MB 5 +#define HV_PGSZ_IDX_2GB 6 +#define HV_PGSZ_IDX_16GB 7 + +/* MMU fault status area. + * + * MMU related faults have their status and fault address information + * placed into a memory region made available by privileged code. Each + * virtual processor must make a mmu_fault_area_conf() call to tell the + * hypervisor where that processor's fault status should be stored. + * + * The fault status block is a multiple of 64-bytes and must be aligned + * on a 64-byte boundary. + */ +#ifndef __ASSEMBLY__ +struct hv_fault_status { + unsigned long i_fault_type; + unsigned long i_fault_addr; + unsigned long i_fault_ctx; + unsigned long i_reserved[5]; + unsigned long d_fault_type; + unsigned long d_fault_addr; + unsigned long d_fault_ctx; + unsigned long d_reserved[5]; +}; +#endif +#define HV_FAULT_I_TYPE_OFFSET 0x00 +#define HV_FAULT_I_ADDR_OFFSET 0x08 +#define HV_FAULT_I_CTX_OFFSET 0x10 +#define HV_FAULT_D_TYPE_OFFSET 0x40 +#define HV_FAULT_D_ADDR_OFFSET 0x48 +#define HV_FAULT_D_CTX_OFFSET 0x50 + +#define HV_FAULT_TYPE_FAST_MISS 1 +#define HV_FAULT_TYPE_FAST_PROT 2 +#define HV_FAULT_TYPE_MMU_MISS 3 +#define HV_FAULT_TYPE_INV_RA 4 +#define HV_FAULT_TYPE_PRIV_VIOL 5 +#define HV_FAULT_TYPE_PROT_VIOL 6 +#define HV_FAULT_TYPE_NFO 7 +#define HV_FAULT_TYPE_NFO_SEFF 8 +#define HV_FAULT_TYPE_INV_VA 9 +#define HV_FAULT_TYPE_INV_ASI 10 +#define HV_FAULT_TYPE_NC_ATOMIC 11 +#define HV_FAULT_TYPE_PRIV_ACT 12 +#define HV_FAULT_TYPE_RESV1 13 +#define HV_FAULT_TYPE_UNALIGNED 14 +#define HV_FAULT_TYPE_INV_PGSZ 15 +/* Values 16 --> -2 are reserved. */ +#define HV_FAULT_TYPE_MULTIPLE -1 + +/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), + * and mmu_{map,unmap}_perm_addr(). + */ +#define HV_MMU_DMMU 0x01 +#define HV_MMU_IMMU 0x02 +#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) + +/* mmu_map_addr() + * TRAP: HV_MMU_MAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * + * Create a non-permanent mapping using the given TTE, virtual + * address, and mmu context. The flags argument determines which + * (data, or instruction, or both) TLB the mapping gets loaded into. + * + * The behavior is undefined if the valid bit is clear in the TTE. + * + * Note: This API call is for privileged code to specify temporary translation + * mappings without the need to create and manage a TSB. + */ + +/* mmu_unmap_addr() + * TRAP: HV_MMU_UNMAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * + * Demaps the given virtual address in the given mmu context on this + * CPU. This function is intended to be used to demap pages mapped + * with mmu_map_addr. This service is equivalent to invoking + * mmu_demap_page() with only the current CPU in the CPU list. The + * flags argument determines which (data, or instruction, or both) TLB + * the mapping gets unmapped from. + * + * Attempting to perform an unmap operation for a previously defined + * permanent mapping will have undefined results. + */ + +/* mmu_tsb_ctx0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: ENORADDR Invalid TSB descriptions pointer or + * TSB base within a descriptor + * EBADALIGN TSB descriptions pointer is not aligned + * to an 8-byte boundary, or TSB base + * within a descriptor is not aligned for + * the given TSB size + * EBADPGSZ Invalid page size in a TSB descriptor + * EBADTSB Invalid associativity or size in a TSB + * descriptor + * EINVAL Invalid number of TSB descriptions, or + * invalid context index in a TSB + * descriptor, or index page size not + * equal to smallest page size in page + * size bitmask field. + * + * Configures the TSBs for the current CPU for virtual addresses with + * context zero. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: The maximum number of TSBs available to a virtual CPU is given by the + * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the + * machine description. + */ +#define HV_FAST_MMU_TSB_CTX0 0x20 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, + unsigned long tsb_desc_ra); +#endif + +/* mmu_tsb_ctxnon0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: Same as for mmu_tsb_ctx0() above. + * + * Configures the TSBs for the current CPU for virtual addresses with + * non-zero contexts. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: A maximum of 16 TSBs may be specified in the TSB description list. + */ +#define HV_FAST_MMU_TSB_CTXNON0 0x21 + +/* mmu_demap_page() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_PAGE + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: virtual address + * ARG3: mmu context + * ARG4: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address, context, or + * flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps any page mapping of the given virtual address in the given + * mmu context for the current virtual CPU. Any virtually tagged + * caches are guaranteed to be kept consistent. The flags argument + * determines which TLB (instruction, or data, or both) participate in + * the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_PAGE 0x22 + +/* mmu_demap_ctx() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_CTX + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: mmu context + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid context or flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the given context for the current virtual CPU. Any virtual + * tagged caches are guaranteed to be kept consistent. The flags + * argument determines which TLB (instruction, or data, or both) + * participate in the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_CTX 0x23 + +/* mmu_demap_all() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_ALL + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the current virtual CPU. Any virtual tagged caches are + * guaranteed to be kept consistent. The flags argument determines + * which TLB (instruction, or data, or both) participate in the + * operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_ALL 0x24 + +#ifndef __ASSEMBLY__ +extern void sun4v_mmu_demap_all(void); +#endif + +/* mmu_map_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * ETOOMANY Too many mappings (max of 8 reached) + * + * Create a permanent mapping using the given TTE and virtual address + * for context 0 on the calling virtual CPU. A maximum of 8 such + * permanent mappings may be specified by privileged code. Mappings + * may be removed with mmu_unmap_perm_addr(). + * + * The behavior is undefined if a TTE with the valid bit clear is given. + * + * Note: This call is used to specify address space mappings for which + * privileged code does not expect to receive misses. For example, + * this mechanism can be used to map kernel nucleus code and data. + */ +#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, + unsigned long set_to_zero, + unsigned long tte, + unsigned long flags); +#endif + +/* mmu_fault_area_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF + * ARG0: real address + * RET0: status + * RET1: previous mmu fault area real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Invalid alignment for fault area + * + * Configure the MMU fault status area for the calling CPU. A 64-byte + * aligned real address specifies where MMU fault status information + * is placed. The return value is the previously specified area, or 0 + * for the first invocation. Specifying a fault area at real address + * 0 is not allowed. + */ +#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 + +/* mmu_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_ENABLE + * ARG0: enable flag + * ARG1: return target address + * RET0: status + * ERRORS: ENORADDR Invalid real address when disabling + * translation. + * EBADALIGN The return target address is not + * aligned to an instruction. + * EINVAL The enable flag request the current + * operating mode (e.g. disable if already + * disabled) + * + * Enable or disable virtual address translation for the calling CPU + * within the virtual machine domain. If the enable flag is zero, + * translation is disabled, any non-zero value will enable + * translation. + * + * When this function returns, the newly selected translation mode + * will be active. If the mmu is being enabled, then the return + * target address is a virtual address else it is a real address. + * + * Upon successful completion, control will be returned to the given + * return target address (ie. the cpu will jump to that address). On + * failure, the previous mmu mode remains and the trap simply returns + * as normal with the appropriate error code in RET0. + */ +#define HV_FAST_MMU_ENABLE 0x27 + +/* mmu_unmap_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * ENOMAP Specified mapping was not found + * + * Demaps any permanent page mapping (established via + * mmu_map_perm_addr()) at the given virtual address for context 0 on + * the current virtual CPU. Any virtual tagged caches are guaranteed + * to be kept consistent. + */ +#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 + +/* mmu_tsb_ctx0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by mmu_tsb_ctx0() + * into the provided buffer. The size of the buffer is given in ARG1 + * in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 + +/* mmu_tsb_ctxnon0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by + * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer + * is given in ARG1 in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a + +/* mmu_fault_area_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO + * RET0: status + * RET1: fault area real address + * ERRORS: No errors defined. + * + * Return the currently defined MMU fault status area for the current + * CPU. The real address of the fault status area is returned in + * RET1, or 0 is returned in RET1 if no fault status area is defined. + * + * Note: mmu_fault_area_conf() may be called with the return value (RET1) + * from this service if there is a need to save and restore the fault + * area for a cpu. + */ +#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b + +/* Cache and Memory services. */ + +/* mem_scrub() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SCRUB + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length scrubbed + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Zero the memory contents in the range real address to real address + * plus length minus 1. Also, valid ECC will be generated for that + * memory address range. Scrubbing is started at the given real + * address, but may not scrub the entire given length. The actual + * length scrubbed will be returned in RET1. + * + * The real address and length must be aligned on an 8K boundary, or + * contain the start address and length from a sun4v error report. + * + * Note: There are two uses for this function. The first use is to block clear + * and initialize memory and the second is to scrub an u ncorrectable + * error reported via a resumable or non-resumable trap. The second + * use requires the arguments to be equal to the real address and length + * provided in a sun4v memory error report. + */ +#define HV_FAST_MEM_SCRUB 0x31 + +/* mem_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SYNC + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length synced + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Force the next access within the real address to real address plus + * length minus 1 to be fetches from main system memory. Less than + * the given length may be synced, the actual amount synced is + * returned in RET1. The real address and length must be aligned on + * an 8K boundary. + */ +#define HV_FAST_MEM_SYNC 0x32 + +/* Time of day services. + * + * The hypervisor maintains the time of day on a per-domain basis. + * Changing the time of day in one domain does not affect the time of + * day on any other domain. + * + * Time is described by a single unsigned 64-bit word which is the + * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, + * 1970). + */ + +/* tod_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_GET + * RET0: status + * RET1: TOD + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * Return the current time of day. May block if TOD access is + * temporarily not possible. + */ +#define HV_FAST_TOD_GET 0x50 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_get(unsigned long *time); +#endif + +/* tod_set() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_SET + * ARG0: TOD + * RET0: status + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * The current time of day is set to the value specified in ARG0. May + * block if TOD access is temporarily not possible. + */ +#define HV_FAST_TOD_SET 0x51 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_set(unsigned long time); +#endif + +/* Console services */ + +/* con_getchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_GETCHAR + * RET0: status + * RET1: character + * ERRORS: EWOULDBLOCK No character available. + * + * Returns a character from the console device. If no character is + * available then an EWOULDBLOCK error is returned. If a character is + * available, then the returned status is EOK and the character value + * is in RET1. + * + * A virtual BREAK is represented by the 64-bit value -1. + * + * A virtual HUP signal is represented by the 64-bit value -2. + */ +#define HV_FAST_CONS_GETCHAR 0x60 + +/* con_putchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_PUTCHAR + * ARG0: character + * RET0: status + * ERRORS: EINVAL Illegal character + * EWOULDBLOCK Output buffer currently full, would block + * + * Send a character to the console device. Only character values + * between 0 and 255 may be used. Values outside this range are + * invalid except for the 64-bit value -1 which is used to send a + * virtual BREAK. + */ +#define HV_FAST_CONS_PUTCHAR 0x61 + +/* con_read() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_READ + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes read or BREAK or HUP + * ERRORS: EWOULDBLOCK No character available. + * + * Reads characters into a buffer from the console device. If no + * character is available then an EWOULDBLOCK error is returned. + * If a character is available, then the returned status is EOK + * and the number of bytes read into the given buffer is provided + * in RET1. + * + * A virtual BREAK is represented by the 64-bit RET1 value -1. + * + * A virtual HUP signal is represented by the 64-bit RET1 value -2. + * + * If BREAK or HUP are indicated, no bytes were read into buffer. + */ +#define HV_FAST_CONS_READ 0x62 + +/* con_write() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_WRITE + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes written + * ERRORS: EWOULDBLOCK Output buffer currently full, would block + * + * Send a characters in buffer to the console device. Breaks must be + * sent using con_putchar(). + */ +#define HV_FAST_CONS_WRITE 0x63 + +#ifndef __ASSEMBLY__ +extern long sun4v_con_getchar(long *status); +extern long sun4v_con_putchar(long c); +extern long sun4v_con_read(unsigned long buffer, + unsigned long size, + unsigned long *bytes_read); +extern unsigned long sun4v_con_write(unsigned long buffer, + unsigned long size, + unsigned long *bytes_written); +#endif + +/* mach_set_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE + * ARG0: software state + * ARG1: software state description pointer + * RET0: status + * ERRORS: EINVAL software state not valid or software state + * description is not NULL terminated + * ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * This allows the guest to report it's soft state to the hypervisor. There + * are two primary components to this state. The first part states whether + * the guest software is running or not. The second containts optional + * details specific to the software. + * + * The software state argument is defined below in HV_SOFT_STATE_*, and + * indicates whether the guest is operating normally or in a transitional + * state. + * + * The software state description argument is a real address of a data buffer + * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL + * terminated 7-bit ASCII string of up to 31 characters not including the + * NULL termination. + */ +#define HV_FAST_MACH_SET_SOFT_STATE 0x70 +#define HV_SOFT_STATE_NORMAL 0x01 +#define HV_SOFT_STATE_TRANSITION 0x02 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, + unsigned long msg_string_ra); +#endif + +/* mach_get_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE + * ARG0: software state description pointer + * RET0: status + * RET1: software state + * ERRORS: ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * Retrieve the current value of the guest's software state. The rules + * for the software state pointer are the same as for mach_set_soft_state() + * above. + */ +#define HV_FAST_MACH_GET_SOFT_STATE 0x71 + +/* svc_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SEND + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: sent_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_SEND 0x80 + +/* svc_recv() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_RECV + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: recv_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_RECV 0x81 + +/* svc_getstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_GETSTATUS + * ARG0: service ID + * RET0: STATUS + * RET1: status bits + */ +#define HV_FAST_SVC_GETSTATUS 0x82 + +/* svc_setstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SETSTATUS + * ARG0: service ID + * ARG1: bits to set + * RET0: STATUS + */ +#define HV_FAST_SVC_SETSTATUS 0x83 + +/* svc_clrstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_CLRSTATUS + * ARG0: service ID + * ARG1: bits to clear + * RET0: STATUS + */ +#define HV_FAST_SVC_CLRSTATUS 0x84 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_svc_send(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *sent_bytes); +extern unsigned long sun4v_svc_recv(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *recv_bytes); +extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, + unsigned long *status_bits); +extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, + unsigned long status_bits); +extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, + unsigned long status_bits); +#endif + +/* Trap trace services. + * + * The hypervisor provides a trap tracing capability for privileged + * code running on each virtual CPU. Privileged code provides a + * round-robin trap trace queue within which the hypervisor writes + * 64-byte entries detailing hyperprivileged traps taken n behalf of + * privileged code. This is provided as a debugging capability for + * privileged code. + * + * The trap trace control structure is 64-bytes long and placed at the + * start (offset 0) of the trap trace buffer, and is described as + * follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_control { + unsigned long head_offset; + unsigned long tail_offset; + unsigned long __reserved[0x30 / sizeof(unsigned long)]; +}; +#endif +#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 +#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 + +/* The head offset is the offset of the most recently completed entry + * in the trap-trace buffer. The tail offset is the offset of the + * next entry to be written. The control structure is owned and + * modified by the hypervisor. A guest may not modify the control + * structure contents. Attempts to do so will result in undefined + * behavior for the guest. + * + * Each trap trace buffer entry is layed out as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_entry { + unsigned char type; /* Hypervisor or guest entry? */ + unsigned char hpstate; /* Hyper-privileged state */ + unsigned char tl; /* Trap level */ + unsigned char gl; /* Global register level */ + unsigned short tt; /* Trap type */ + unsigned short tag; /* Extended trap identifier */ + unsigned long tstate; /* Trap state */ + unsigned long tick; /* Tick */ + unsigned long tpc; /* Trap PC */ + unsigned long f1; /* Entry specific */ + unsigned long f2; /* Entry specific */ + unsigned long f3; /* Entry specific */ + unsigned long f4; /* Entry specific */ +}; +#endif +#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 +#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 +#define HV_TRAP_TRACE_ENTRY_TL 0x02 +#define HV_TRAP_TRACE_ENTRY_GL 0x03 +#define HV_TRAP_TRACE_ENTRY_TT 0x04 +#define HV_TRAP_TRACE_ENTRY_TAG 0x06 +#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 +#define HV_TRAP_TRACE_ENTRY_TICK 0x10 +#define HV_TRAP_TRACE_ENTRY_TPC 0x18 +#define HV_TRAP_TRACE_ENTRY_F1 0x20 +#define HV_TRAP_TRACE_ENTRY_F2 0x28 +#define HV_TRAP_TRACE_ENTRY_F3 0x30 +#define HV_TRAP_TRACE_ENTRY_F4 0x38 + +/* The type field is encoded as follows. */ +#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ +#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ +#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ + +/* ttrace_buf_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_CONF + * ARG0: real address + * ARG1: number of entries + * RET0: status + * RET1: number of entries + * ERRORS: ENORADDR Invalid real address + * EINVAL Size is too small + * EBADALIGN Real address not aligned on 64-byte boundary + * + * Requests hypervisor trap tracing and declares a virtual CPU's trap + * trace buffer to the hypervisor. The real address supplies the real + * base address of the trap trace queue and must be 64-byte aligned. + * Specifying a value of 0 for the number of entries disables trap + * tracing for the calling virtual CPU. The buffer allocated must be + * sized for a power of two number of 64-byte trap trace entries plus + * an initial 64-byte control structure. + * + * This may be invoked any number of times so that a virtual CPU may + * relocate a trap trace buffer or create "snapshots" of information. + * + * If the real address is illegal or badly aligned, then trap tracing + * is disabled and an error is returned. + * + * Upon failure with EINVAL, this service call returns in RET1 the + * minimum number of buffer entries required. Upon other failures + * RET1 is undefined. + */ +#define HV_FAST_TTRACE_BUF_CONF 0x90 + +/* ttrace_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_INFO + * RET0: status + * RET1: real address + * RET2: size + * ERRORS: None defined. + * + * Returns the size and location of the previously declared trap-trace + * buffer. In the event that no buffer was previously defined, or the + * buffer is disabled, this call will return a size of zero bytes. + */ +#define HV_FAST_TTRACE_BUF_INFO 0x91 + +/* ttrace_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_ENABLE + * ARG0: enable + * RET0: status + * RET1: previous enable state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Enable or disable trap tracing, and return the previous enabled + * state in RET1. Future systems may define various flags for the + * enable argument (ARG0), for the moment a guest should pass + * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all + * tracing - which will ensure future compatability. + */ +#define HV_FAST_TTRACE_ENABLE 0x92 + +/* ttrace_freeze() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_FREEZE + * ARG0: freeze + * RET0: status + * RET1: previous freeze state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Freeze or unfreeze trap tracing, returning the previous freeze + * state in RET1. A guest should pass a non-zero value to freeze and + * a zero value to unfreeze all tracing. The returned previous state + * is 0 for not frozen and 1 for frozen. + */ +#define HV_FAST_TTRACE_FREEZE 0x93 + +/* ttrace_addentry() + * TRAP: HV_TTRACE_ADDENTRY_TRAP + * ARG0: tag (16-bits) + * ARG1: data word 0 + * ARG2: data word 1 + * ARG3: data word 2 + * ARG4: data word 3 + * RET0: status + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 + * is modified - none of the other registers holding arguments are + * volatile across this hypervisor service. + */ + +/* Core dump services. + * + * Since the hypervisor viraulizes and thus obscures a lot of the + * physical machine layout and state, traditional OS crash dumps can + * be difficult to diagnose especially when the problem is a + * configuration error of some sort. + * + * The dump services provide an opaque buffer into which the + * hypervisor can place it's internal state in order to assist in + * debugging such situations. The contents are opaque and extremely + * platform and hypervisor implementation specific. The guest, during + * a core dump, requests that the hypervisor update any information in + * the dump buffer in preparation to being dumped as part of the + * domain's memory image. + */ + +/* dump_buf_update() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_UPDATE + * ARG0: real address + * ARG1: size + * RET0: status + * RET1: required size of dump buffer + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address is not aligned on a 64-byte + * boundary + * EINVAL Size is non-zero but less than minimum size + * required + * ENOTSUPPORTED Operation not supported on current logical + * domain + * + * Declare a domain dump buffer to the hypervisor. The real address + * provided for the domain dump buffer must be 64-byte aligned. The + * size specifies the size of the dump buffer and may be larger than + * the minimum size specified in the machine description. The + * hypervisor will fill the dump buffer with opaque data. + * + * Note: A guest may elect to include dump buffer contents as part of a crash + * dump to assist with debugging. This function may be called any number + * of times so that a guest may relocate a dump buffer, or create + * "snapshots" of any dump-buffer information. Each call to + * dump_buf_update() atomically declares the new dump buffer to the + * hypervisor. + * + * A specified size of 0 unconfigures the dump buffer. If the real + * address is illegal or badly aligned, then any currently active dump + * buffer is disabled and an error is returned. + * + * In the event that the call fails with EINVAL, RET1 contains the + * minimum size requires by the hypervisor for a valid dump buffer. + */ +#define HV_FAST_DUMP_BUF_UPDATE 0x94 + +/* dump_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_INFO + * RET0: status + * RET1: real address of current dump buffer + * RET2: size of current dump buffer + * ERRORS: No errors defined. + * + * Return the currently configures dump buffer description. A + * returned size of 0 bytes indicates an undefined dump buffer. In + * this case the return address in RET1 is undefined. + */ +#define HV_FAST_DUMP_BUF_INFO 0x95 + +/* Device interrupt services. + * + * Device interrupts are allocated to system bus bridges by the hypervisor, + * and described to OBP in the machine description. OBP then describes + * these interrupts to the OS via properties in the device tree. + * + * Terminology: + * + * cpuid Unique opaque value which represents a target cpu. + * + * devhandle Device handle. It uniquely identifies a device, and + * consistes of the lower 28-bits of the hi-cell of the + * first entry of the device's "reg" property in the + * OBP device tree. + * + * devino Device interrupt number. Specifies the relative + * interrupt number within the device. The unique + * combination of devhandle and devino are used to + * identify a specific device interrupt. + * + * Note: The devino value is the same as the values in the + * "interrupts" property or "interrupt-map" property + * in the OBP device tree for that device. + * + * sysino System interrupt number. A 64-bit unsigned interger + * representing a unique interrupt within a virtual + * machine. + * + * intr_state A flag representing the interrupt state for a given + * sysino. The state values are defined below. + * + * intr_enabled A flag representing the 'enabled' state for a given + * sysino. The enable values are defined below. + */ + +#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ +#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ +#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ + +#define HV_INTR_DISABLED 0 /* sysino not enabled */ +#define HV_INTR_ENABLED 1 /* sysino enabled */ + +/* intr_devino_to_sysino() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO + * ARG0: devhandle + * ARG1: devino + * RET0: status + * RET1: sysino + * ERRORS: EINVAL Invalid devhandle/devino + * + * Converts a device specific interrupt number of the given + * devhandle/devino into a system specific ino (sysino). + */ +#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, + unsigned long devino); +#endif + +/* intr_getenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETENABLED + * ARG0: sysino + * RET0: status + * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * ERRORS: EINVAL Invalid sysino + * + * Returns interrupt enabled state in RET1 for the interrupt defined + * by the given sysino. + */ +#define HV_FAST_INTR_GETENABLED 0xa1 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getenabled(unsigned long sysino); +#endif + +/* intr_setenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETENABLED + * ARG0: sysino + * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_enabled value + * + * Set the 'enabled' state of the interrupt sysino. + */ +#define HV_FAST_INTR_SETENABLED 0xa2 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); +#endif + +/* intr_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETSTATE + * ARG0: sysino + * RET0: status + * RET1: intr_state (HV_INTR_STATE_*) + * ERRORS: EINVAL Invalid sysino + * + * Returns current state of the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_GETSTATE 0xa3 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getstate(unsigned long sysino); +#endif + +/* intr_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETSTATE + * ARG0: sysino + * ARG1: intr_state (HV_INTR_STATE_*) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_state value + * + * Sets the current state of the interrupt described by the given sysino + * value. + * + * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending + * interrupt for sysino. + */ +#define HV_FAST_INTR_SETSTATE 0xa4 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); +#endif + +/* intr_gettarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETTARGET + * ARG0: sysino + * RET0: status + * RET1: cpuid + * ERRORS: EINVAL Invalid sysino + * + * Returns CPU that is the current target of the interrupt defined by + * the given sysino. The CPU value returned is undefined if the target + * has not been set via intr_settarget(). + */ +#define HV_FAST_INTR_GETTARGET 0xa5 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_gettarget(unsigned long sysino); +#endif + +/* intr_settarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETTARGET + * ARG0: sysino + * ARG1: cpuid + * RET0: status + * ERRORS: EINVAL Invalid sysino + * ENOCPU Invalid cpuid + * + * Set the target CPU for the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_SETTARGET 0xa6 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); +#endif + +/* vintr_get_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_COOKIE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cookie + */ +#define HV_FAST_VINTR_GET_COOKIE 0xa7 + +/* vintr_set_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_COOKIE + * ARG0: device handle + * ARG1: device ino + * ARG2: cookie + * RET0: status + */ +#define HV_FAST_VINTR_SET_COOKIE 0xa8 + +/* vintr_get_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_VALID + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: valid state + */ +#define HV_FAST_VINTR_GET_VALID 0xa9 + +/* vintr_set_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_VALID + * ARG0: device handle + * ARG1: device ino + * ARG2: valid state + * RET0: status + */ +#define HV_FAST_VINTR_SET_VALID 0xaa + +/* vintr_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_STATE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: state + */ +#define HV_FAST_VINTR_GET_STATE 0xab + +/* vintr_set_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_STATE + * ARG0: device handle + * ARG1: device ino + * ARG2: state + * RET0: status + */ +#define HV_FAST_VINTR_SET_STATE 0xac + +/* vintr_get_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_TARGET + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cpuid + */ +#define HV_FAST_VINTR_GET_TARGET 0xad + +/* vintr_set_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_TARGET + * ARG0: device handle + * ARG1: device ino + * ARG2: cpuid + * RET0: status + */ +#define HV_FAST_VINTR_SET_TARGET 0xae + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cookie); +extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cookie); +extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *valid); +extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long valid); +extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *state); +extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long state); +extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cpuid); +extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cpuid); +#endif + +/* PCI IO services. + * + * See the terminology descriptions in the device interrupt services + * section above as those apply here too. Here are terminology + * definitions specific to these PCI IO services: + * + * tsbnum TSB number. Indentifies which io-tsb is used. + * For this version of the specification, tsbnum + * must be zero. + * + * tsbindex TSB index. Identifies which entry in the TSB + * is used. The first entry is zero. + * + * tsbid A 64-bit aligned data structure which contains + * a tsbnum and a tsbindex. Bits 63:32 contain the + * tsbnum and bits 31:00 contain the tsbindex. + * + * Use the HV_PCI_TSBID() macro to construct such + * values. + * + * io_attributes IO attributes for IOMMU mappings. One of more + * of the attritbute bits are stores in a 64-bit + * value. The values are defined below. + * + * r_addr 64-bit real address + * + * pci_device PCI device address. A PCI device address identifies + * a specific device on a specific PCI bus segment. + * A PCI device address ia a 32-bit unsigned integer + * with the following format: + * + * 00000000.bbbbbbbb.dddddfff.00000000 + * + * Use the HV_PCI_DEVICE_BUILD() macro to construct + * such values. + * + * pci_config_offset + * PCI configureation space offset. For conventional + * PCI a value between 0 and 255. For extended + * configuration space, a value between 0 and 4095. + * + * Note: For PCI configuration space accesses, the offset + * must be aligned to the access size. + * + * error_flag A return value which specifies if the action succeeded + * or failed. 0 means no error, non-0 means some error + * occurred while performing the service. + * + * io_sync_direction + * Direction definition for pci_dma_sync(), defined + * below in HV_PCI_SYNC_*. + * + * io_page_list A list of io_page_addresses, an io_page_address is + * a real address. + * + * io_page_list_p A pointer to an io_page_list. + * + * "size based byte swap" - Some functions do size based byte swapping + * which allows sw to access pointers and + * counters in native form when the processor + * operates in a different endianness than the + * IO bus. Size-based byte swapping converts a + * multi-byte field between big-endian and + * little-endian format. + */ + +#define HV_PCI_MAP_ATTR_READ 0x01 +#define HV_PCI_MAP_ATTR_WRITE 0x02 + +#define HV_PCI_DEVICE_BUILD(b,d,f) \ + ((((b) & 0xff) << 16) | \ + (((d) & 0x1f) << 11) | \ + (((f) & 0x07) << 8)) + +#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ + ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) + +#define HV_PCI_SYNC_FOR_DEVICE 0x01 +#define HV_PCI_SYNC_FOR_CPU 0x02 + +/* pci_iommu_map() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_MAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * ARG3: io_attributes + * ARG4: io_page_list_p + * RET0: status + * RET1: #ttes mapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes + * EBADALIGN Improperly aligned real address + * ENORADDR Invalid real address + * + * Create IOMMU mappings in the sun4v device defined by the given + * devhandle. The mappings are created in the TSB defined by the + * tsbnum component of the given tsbid. The first mapping is created + * in the TSB i ndex defined by the tsbindex component of the given tsbid. + * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, + * the second at tsbnum, tsbindex + 1, etc. + * + * All mappings are created with the attributes defined by the io_attributes + * argument. The page mapping addresses are described in the io_page_list + * defined by the given io_page_list_p, which is a pointer to the io_page_list. + * The first entry in the io_page_list is the address for the first iotte, the + * 2nd for the 2nd iotte, and so on. + * + * Each io_page_address in the io_page_list must be appropriately aligned. + * #ttes must be greater than zero. For this version of the spec, the tsbnum + * component of the given tsbid must be zero. + * + * Returns the actual number of mappings creates, which may be less than + * or equal to the argument #ttes. If the function returns a value which + * is less than the #ttes, the caller may continus to call the function with + * an updated tsbid, #ttes, io_page_list_p arguments until all pages are + * mapped. + * + * Note: This function does not imply an iotte cache flush. The guest must + * demap an entry before re-mapping it. + */ +#define HV_FAST_PCI_IOMMU_MAP 0xb0 + +/* pci_iommu_demap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * RET0: status + * RET1: #ttes demapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * + * Demap and flush IOMMU mappings in the device defined by the given + * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum + * component of the given tsbid, starting at the TSB index defined by the + * tsbindex component of the given tsbid. + * + * For this version of the spec, the tsbnum of the given tsbid must be zero. + * #ttes must be greater than zero. + * + * Returns the actual number of ttes demapped, which may be less than or equal + * to the argument #ttes. If #ttes demapped is less than #ttes, the caller + * may continue to call this function with updated tsbid and #ttes arguments + * until all pages are demapped. + * + * Note: Entries do not have to be mapped to be demapped. A demap of an + * unmapped page will flush the entry from the tte cache. + */ +#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 + +/* pci_iommu_getmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP + * ARG0: devhandle + * ARG1: tsbid + * RET0: status + * RET1: io_attributes + * RET2: real address + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * ENOMAP Mapping is not valid, no translation exists + * + * Read and return the mapping in the device described by the given devhandle + * and tsbid. If successful, the io_attributes shall be returned in RET1 + * and the page address of the mapping shall be returned in RET2. + * + * For this version of the spec, the tsbnum component of the given tsbid + * must be zero. + */ +#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 + +/* pci_iommu_getbypass() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS + * ARG0: devhandle + * ARG1: real address + * ARG2: io_attributes + * RET0: status + * RET1: io_addr + * ERRORS: EINVAL Invalid devhandle/io_attributes + * ENORADDR Invalid real address + * ENOTSUPPORTED Function not supported in this implementation. + * + * Create a "special" mapping in the device described by the given devhandle, + * for the given real address and attributes. Return the IO address in RET1 + * if successful. + */ +#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 + +/* pci_config_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_GET + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Read PCI configuration space for the adapter described by the given + * devhandle. Read size (1, 2, or 4) bytes of data from the given + * pci_device, at pci_config_offset from the beginning of the device's + * configuration space. If there was no error, RET1 is set to zero and + * RET2 is set to the data read. Insignificant bits in RET2 are not + * guarenteed to have any specific value and therefore must be ignored. + * + * The data returned in RET2 is size based byte swapped. + * + * If an error occurs during the read, set RET1 to a non-zero value. The + * given pci_config_offset must be 'size' aligned. + */ +#define HV_FAST_PCI_CONFIG_GET 0xb4 + +/* pci_config_put() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_PUT + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * ARG4: data + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Write PCI configuration space for the adapter described by the given + * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, + * at pci_config_offset from the beginning of the device's configuration + * space. The data argument contains the data to be written to configuration + * space. Prior to writing, the data is size based byte swapped. + * + * If an error occurs during the write access, do not generate an error + * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. + * The given pci_config_offset must be 'size' aligned. + * + * This function is permitted to read from offset zero in the configuration + * space described by the given pci_device if necessary to ensure that the + * write access to config space completes. + */ +#define HV_FAST_PCI_CONFIG_PUT 0xb5 + +/* pci_peek() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_PEEK + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle or size + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * + * Attempt to read the IO address given by the given devhandle, real address, + * and size. Size must be 1, 2, 4, or 8. The read is performed as a single + * access operation using the given size. If an error occurs when reading + * from the given location, do not generate an error report, but return a + * non-zero value in RET1. If the read was successful, return zero in RET1 + * and return the actual data read in RET2. The data returned is size based + * byte swapped. + * + * Non-significant bits in RET2 are not guarenteed to have any specific value + * and therefore must be ignored. If RET1 is returned as non-zero, the data + * value is not guarenteed to have any specific value and should be ignored. + * + * The caller must have permission to read from the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_PEEK 0xb6 + +/* pci_poke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_POKE + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: data + * ARG4: pci_device + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle, size, or pci_device + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * ENOTSUPPORTED Function is not supported by implementation + * + * Attempt to write data to the IO address given by the given devhandle, + * real address, and size. Size must be 1, 2, 4, or 8. The write is + * performed as a single access operation using the given size. Prior to + * writing the data is size based swapped. + * + * If an error occurs when writing to the given location, do not generate an + * error report, but return a non-zero value in RET1. If the write was + * successful, return zero in RET1. + * + * pci_device describes the configuration address of the device being + * written to. The implementation may safely read from offset 0 with + * the configuration space of the device described by devhandle and + * pci_device in order to guarantee that the write portion of the operation + * completes + * + * Any error that occurs due to the read shall be reported using the normal + * error reporting mechanisms .. the read error is not suppressed. + * + * The caller must have permission to write to the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. The caller must have permission to read from + * the given devhandle, pci_device cofiguration space offset 0. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_POKE 0xb7 + +/* pci_dma_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_DMA_SYNC + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: io_sync_direction + * RET0: status + * RET1: #synced + * ERRORS: EINVAL Invalid devhandle or io_sync_direction + * ENORADDR Bad real address + * + * Synchronize a memory region described by the given real address and size, + * for the device defined by the given devhandle using the direction(s) + * defined by the given io_sync_direction. The argument size is the size of + * the memory region in bytes. + * + * Return the actual number of bytes synchronized in the return value #synced, + * which may be less than or equal to the argument size. If the return + * value #synced is less than size, the caller must continue to call this + * function with updated real address and size arguments until the entire + * memory region is synchronized. + */ +#define HV_FAST_PCI_DMA_SYNC 0xb8 + +/* PCI MSI services. */ + +#define HV_MSITYPE_MSI32 0x00 +#define HV_MSITYPE_MSI64 0x01 + +#define HV_MSIQSTATE_IDLE 0x00 +#define HV_MSIQSTATE_ERROR 0x01 + +#define HV_MSIQ_INVALID 0x00 +#define HV_MSIQ_VALID 0x01 + +#define HV_MSISTATE_IDLE 0x00 +#define HV_MSISTATE_DELIVERED 0x01 + +#define HV_MSIVALID_INVALID 0x00 +#define HV_MSIVALID_VALID 0x01 + +#define HV_PCIE_MSGTYPE_PME_MSG 0x18 +#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b +#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 +#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 +#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 + +#define HV_MSG_INVALID 0x00 +#define HV_MSG_VALID 0x01 + +/* pci_msiq_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_CONF + * ARG0: devhandle + * ARG1: msiqid + * ARG2: real address + * ARG3: number of entries + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msiqid or nentries + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * + * Configure the MSI queue given by the devhandle and msiqid arguments, + * and to be placed at the given real address and be of the given + * number of entries. The real address must be aligned exactly to match + * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry + * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ + * Head and Tail are initialized so that the MSI-EQ is 'empty'. + * + * Implementation Note: Certain implementations have fixed sized queues. In + * that case, number of entries must contain the correct + * value. + */ +#define HV_FAST_PCI_MSIQ_CONF 0xc0 + +/* pci_msiq_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_INFO + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: real address + * RET2: number of entries + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Return the configuration information for the MSI queue described + * by the given devhandle and msiqid. The base address of the queue + * is returned in ARG1 and the number of entries is returned in ARG2. + * If the queue is unconfigured, the real address is undefined and the + * number of entries will be returned as zero. + */ +#define HV_FAST_PCI_MSIQ_INFO 0xc1 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the valid state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 + +/* pci_msiq_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid + * value or MSI EQ is uninitialized + * + * Set the valid state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 + +/* pci_msiq_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate + * value or MSI EQ is uninitialized + * + * Set the state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 + +/* pci_msiq_gethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqhead + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 + +/* pci_msiq_sethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqhead + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, + * or MSI EQ is uninitialized + * + * Set the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 + +/* pci_msiq_gettail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqtail + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue tail for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 + +/* pci_msi_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETVALID + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msivalidstate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_GETVALID 0xc9 + +/* pci_msi_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETVALID + * ARG0: devhandle + * ARG1: msinum + * ARG2: msivalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate + * + * Set the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETVALID 0xca + +/* pci_msi_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound + * + * Get the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_GETMSIQ 0xcb + +/* pci_msi_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ + * ARG0: devhandle + * ARG1: msinum + * ARG2: msitype + * ARG3: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msiqid + * + * Set the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_SETMSIQ 0xcc + +/* pci_msi_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETSTATE + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msistate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the state of the MSI defined by the given devhandle and msinum. + * If not initialized, return HV_MSISTATE_IDLE. + */ +#define HV_FAST_PCI_MSI_GETSTATE 0xcd + +/* pci_msi_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETSTATE + * ARG0: devhandle + * ARG1: msinum + * ARG2: msistate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msistate + * + * Set the state of the MSI defined by the given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETSTATE 0xce + +/* pci_msg_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 + +/* pci_msg_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid + * + * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 + +/* pci_msg_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETVALID + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msgvalidstate + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETVALID 0xd2 + +/* pci_msg_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETVALID + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msgvalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate + * + * Set the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETVALID 0xd3 + +/* Logical Domain Channel services. */ + +#define LDC_CHANNEL_DOWN 0 +#define LDC_CHANNEL_UP 1 +#define LDC_CHANNEL_RESETTING 2 + +/* ldc_tx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure transmit queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * Upon configuration of a valid transmit queue the head and tail + * pointers are set to a hypervisor specific identical value indicating + * that the queue initially is empty. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. A transmit queue may be + * specified even in the event that the LDC is down (peer endpoint has no + * receive queue specified). Transmission will begin as soon as the peer + * endpoint defines a receive queue. + * + * It is recommended that a guest wait for a transmit queue to empty prior + * to reconfiguring it, or un-configuring it. Re or un-configuring of a + * non-empty transmit queue behaves exactly as defined above, however it + * is undefined as to how many of the pending entries in the original queue + * will be delivered prior to the re-configuration taking effect. + * Furthermore, as the queue configuration causes a reset of the head and + * tail pointers there is no way for a guest to determine how many entries + * have been sent after the configuration operation. + */ +#define HV_FAST_LDC_TX_QCONF 0xe0 + +/* ldc_tx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the transmit queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no transmit + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_TX_QINFO 0xe1 + +/* ldc_tx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the transmit state, and the head and tail queue pointers, for + * the transmit queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the transmit queue for the specified endpoint. + */ +#define HV_FAST_LDC_TX_GET_STATE 0xe2 + +/* ldc_tx_set_qtail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL + * ARG0: channel ID + * ARG1: tail offset + * RET0: status + * + * Update the tail pointer for the transmit queue associated with the LDC + * endpoint defined by the given channel ID. The tail offset specified + * must be aligned on a 64 byte boundary, and calculated so as to increase + * the number of pending entries on the transmit queue. Any attempt to + * decrease the number of pending transmit queue entires is considered + * an invalid tail offset and will result in an EINVAL error. + * + * Since the tail of the transmit queue may not be moved backwards, the + * transmit queue may be flushed by configuring a new transmit queue, + * whereupon the hypervisor will configure the initial transmit head and + * tail pointers to be equal. + */ +#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 + +/* ldc_rx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure receive queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * If a valid receive queue is specified for a local endpoint the LDC is + * in the up state for the purpose of transmission to this endpoint. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. + * + * As receive queue configuration causes a reset of the queue's head and + * tail pointers there is no way for a gues to determine how many entries + * have been received between a preceeding ldc_get_rx_state() API call + * and the completion of the configuration operation. It should be noted + * that datagram delivery is not guarenteed via domain channels anyway, + * and therefore any higher protocol should be resilient to datagram + * loss if necessary. However, to overcome this specific race potential + * it is recommended, for example, that a higher level protocol be employed + * to ensure either retransmission, or ensure that no datagrams are pending + * on the peer endpoint's transmit queue prior to the configuration process. + */ +#define HV_FAST_LDC_RX_QCONF 0xe4 + +/* ldc_rx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the receive queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no receive + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_RX_QINFO 0xe5 + +/* ldc_rx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the receive state, and the head and tail queue pointers, for + * the receive queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the receive queue for the specified endpoint. + */ +#define HV_FAST_LDC_RX_GET_STATE 0xe6 + +/* ldc_rx_set_qhead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD + * ARG0: channel ID + * ARG1: head offset + * RET0: status + * + * Update the head pointer for the receive queue associated with the LDC + * endpoint defined by the given channel ID. The head offset specified + * must be aligned on a 64 byte boundary, and calculated so as to decrease + * the number of pending entries on the receive queue. Any attempt to + * increase the number of pending receive queue entires is considered + * an invalid head offset and will result in an EINVAL error. + * + * The receive queue may be flushed by setting the head offset equal + * to the current tail offset. + */ +#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 + +/* LDC Map Table Entry. Each slot is defined by a translation table + * entry, as specified by the LDC_MTE_* bits below, and a 64-bit + * hypervisor invalidation cookie. + */ +#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ +#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ +#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ +#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ +#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ +#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ +#define LDC_MTE_WRITE 0x0000000000000020 /* read */ +#define LDC_MTE_READ 0x0000000000000010 /* write */ +#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ +#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ +#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ +#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ +#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ +#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ +#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ +#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ +#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ + +#ifndef __ASSEMBLY__ +struct ldc_mtable_entry { + unsigned long mte; + unsigned long cookie; +}; +#endif + +/* ldc_set_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE + * ARG0: channel ID + * ARG1: table real address + * ARG2: num entries + * RET0: status + * + * Register the MTE table at the given table real address, with the + * specified num entries, for the LDC indicated by the given channel + * ID. + */ +#define HV_FAST_LDC_SET_MAP_TABLE 0xea + +/* ldc_get_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE + * ARG0: channel ID + * RET0: status + * RET1: table real address + * RET2: num entries + * + * Return the configuration of the current mapping table registered + * for the given channel ID. + */ +#define HV_FAST_LDC_GET_MAP_TABLE 0xeb + +#define LDC_COPY_IN 0 +#define LDC_COPY_OUT 1 + +/* ldc_copy() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_COPY + * ARG0: channel ID + * ARG1: LDC_COPY_* direction code + * ARG2: target real address + * ARG3: local real address + * ARG4: length in bytes + * RET0: status + * RET1: actual length in bytes + */ +#define HV_FAST_LDC_COPY 0xec + +#define LDC_MEM_READ 1 +#define LDC_MEM_WRITE 2 +#define LDC_MEM_EXEC 4 + +/* ldc_mapin() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_MAPIN + * ARG0: channel ID + * ARG1: cookie + * RET0: status + * RET1: real address + * RET2: LDC_MEM_* permissions + */ +#define HV_FAST_LDC_MAPIN 0xed + +/* ldc_unmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_UNMAP + * ARG0: real address + * RET0: status + */ +#define HV_FAST_LDC_UNMAP 0xee + +/* ldc_revoke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_REVOKE + * ARG0: channel ID + * ARG1: cookie + * ARG2: ldc_mtable_entry cookie + * RET0: status + */ +#define HV_FAST_LDC_REVOKE 0xef + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, + unsigned long tail_off); +extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, + unsigned long head_off); +extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_copy(unsigned long channel, + unsigned long dir_code, + unsigned long tgt_raddr, + unsigned long lcl_raddr, + unsigned long len, + unsigned long *actual_len); +extern unsigned long sun4v_ldc_mapin(unsigned long channel, + unsigned long cookie, + unsigned long *ra, + unsigned long *perm); +extern unsigned long sun4v_ldc_unmap(unsigned long ra); +extern unsigned long sun4v_ldc_revoke(unsigned long channel, + unsigned long cookie, + unsigned long mte_cookie); +#endif + +/* Performance counter services. */ + +#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 +#define HV_PERF_JBUS_PERF_CNT_REG 0x01 +#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 +#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 +#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 +#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 +#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 +#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 +#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 +#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 + +/* get_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_GET_PERFREG + * ARG0: performance reg number + * RET0: status + * RET1: performance reg value + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Read the value of the given DRAM/JBUS performance counter/control register. + */ +#define HV_FAST_GET_PERFREG 0x100 + +/* set_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SET_PERFREG + * ARG0: performance reg number + * ARG1: performance reg value + * RET0: status + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Write the given performance reg value to the given DRAM/JBUS + * performance counter/control register. + */ +#define HV_FAST_SET_PERFREG 0x101 + +/* MMU statistics services. + * + * The hypervisor maintains MMU statistics and privileged code provides + * a buffer where these statistics can be collected. It is continually + * updated once configured. The layout is as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_mmu_statistics { + unsigned long immu_tsb_hits_ctx0_8k_tte; + unsigned long immu_tsb_ticks_ctx0_8k_tte; + unsigned long immu_tsb_hits_ctx0_64k_tte; + unsigned long immu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved1[2]; + unsigned long immu_tsb_hits_ctx0_4mb_tte; + unsigned long immu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved2[2]; + unsigned long immu_tsb_hits_ctx0_256mb_tte; + unsigned long immu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved3[4]; + unsigned long immu_tsb_hits_ctxnon0_8k_tte; + unsigned long immu_tsb_ticks_ctxnon0_8k_tte; + unsigned long immu_tsb_hits_ctxnon0_64k_tte; + unsigned long immu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved4[2]; + unsigned long immu_tsb_hits_ctxnon0_4mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved5[2]; + unsigned long immu_tsb_hits_ctxnon0_256mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved6[4]; + unsigned long dmmu_tsb_hits_ctx0_8k_tte; + unsigned long dmmu_tsb_ticks_ctx0_8k_tte; + unsigned long dmmu_tsb_hits_ctx0_64k_tte; + unsigned long dmmu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved7[2]; + unsigned long dmmu_tsb_hits_ctx0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved8[2]; + unsigned long dmmu_tsb_hits_ctx0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved9[4]; + unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; + unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved10[2]; + unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved11[2]; + unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved12[4]; +}; +#endif + +/* mmustat_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_CONF + * ARG0: real address + * RET0: status + * RET1: real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address not aligned on 64-byte boundary + * EBADTRAP API not supported on this processor + * + * Enable MMU statistic gathering using the buffer at the given real + * address on the current virtual CPU. The new buffer real address + * is given in ARG1, and the previously specified buffer real address + * is returned in RET1, or is returned as zero for the first invocation. + * + * If the passed in real address argument is zero, this will disable + * MMU statistic collection on the current virtual CPU. If an error is + * returned then no statistics are collected. + * + * The buffer contents should be initialized to all zeros before being + * given to the hypervisor or else the statistics will be meaningless. + */ +#define HV_FAST_MMUSTAT_CONF 0x102 + +/* mmustat_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_INFO + * RET0: status + * RET1: real address + * ERRORS: EBADTRAP API not supported on this processor + * + * Return the current state and real address of the currently configured + * MMU statistics buffer on the current virtual CPU. + */ +#define HV_FAST_MMUSTAT_INFO 0x103 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); +extern unsigned long sun4v_mmustat_info(unsigned long *ra); +#endif + +/* NCS crypto services */ + +/* ncs_request() sub-function numbers */ +#define HV_NCS_QCONF 0x01 +#define HV_NCS_QTAIL_UPDATE 0x02 + +#ifndef __ASSEMBLY__ +struct hv_ncs_queue_entry { + /* MAU Control Register */ + unsigned long mau_control; +#define MAU_CONTROL_INV_PARITY 0x0000000000002000 +#define MAU_CONTROL_STRAND 0x0000000000001800 +#define MAU_CONTROL_BUSY 0x0000000000000400 +#define MAU_CONTROL_INT 0x0000000000000200 +#define MAU_CONTROL_OP 0x00000000000001c0 +#define MAU_CONTROL_OP_SHIFT 6 +#define MAU_OP_LOAD_MA_MEMORY 0x0 +#define MAU_OP_STORE_MA_MEMORY 0x1 +#define MAU_OP_MODULAR_MULT 0x2 +#define MAU_OP_MODULAR_REDUCE 0x3 +#define MAU_OP_MODULAR_EXP_LOOP 0x4 +#define MAU_CONTROL_LEN 0x000000000000003f +#define MAU_CONTROL_LEN_SHIFT 0 + + /* Real address of bytes to load or store bytes + * into/out-of the MAU. + */ + unsigned long mau_mpa; + + /* Modular Arithmetic MA Offset Register. */ + unsigned long mau_ma; + + /* Modular Arithmetic N Prime Register. */ + unsigned long mau_np; +}; + +struct hv_ncs_qconf_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long base; /* Real address base of queue */ + unsigned long end; /* Real address end of queue */ + unsigned long num_ents; /* Number of entries in queue */ +}; + +struct hv_ncs_qtail_update_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long tail; /* New tail index to use */ + unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ +#define HV_NCS_SYNCFLAG_SYNC 0x00 +#define HV_NCS_SYNCFLAG_ASYNC 0x01 +}; +#endif + +/* ncs_request() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_NCS_REQUEST + * ARG0: NCS sub-function + * ARG1: sub-function argument real address + * ARG2: size in bytes of sub-function argument + * RET0: status + * + * The MAU chip of the Niagara processor is not directly accessible + * to privileged code, instead it is programmed indirectly via this + * hypervisor API. + * + * The interfaces defines a queue of MAU operations to perform. + * Privileged code registers a queue with the hypervisor by invoking + * this HVAPI with the HV_NCS_QCONF sub-function, which defines the + * base, end, and number of entries of the queue. Each queue entry + * contains a MAU register struct block. + * + * The privileged code then proceeds to add entries to the queue and + * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only + * synchronous operations are supported by the current hypervisor, + * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to + * completion and return HV_EOK, or return an error code. + * + * The real address of the sub-function argument must be aligned on at + * least an 8-byte boundary. + * + * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte + * offset, into the queue and must be less than or equal the 'num_ents' + * argument given in the HV_NCS_QCONF call. + */ +#define HV_FAST_NCS_REQUEST 0x110 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ncs_request(unsigned long request, + unsigned long arg_ra, + unsigned long arg_size); +#endif + +#define HV_FAST_FIRE_GET_PERFREG 0x120 +#define HV_FAST_FIRE_SET_PERFREG 0x121 + +/* Function numbers for HV_CORE_TRAP. */ +#define HV_CORE_SET_VER 0x00 +#define HV_CORE_PUTCHAR 0x01 +#define HV_CORE_EXIT 0x02 +#define HV_CORE_GET_VER 0x03 + +/* Hypervisor API groups for use with HV_CORE_SET_VER and + * HV_CORE_GET_VER. + */ +#define HV_GRP_SUN4V 0x0000 +#define HV_GRP_CORE 0x0001 +#define HV_GRP_INTR 0x0002 +#define HV_GRP_SOFT_STATE 0x0003 +#define HV_GRP_PCI 0x0100 +#define HV_GRP_LDOM 0x0101 +#define HV_GRP_SVC_CHAN 0x0102 +#define HV_GRP_NCS 0x0103 +#define HV_GRP_NIAG_PERF 0x0200 +#define HV_GRP_FIRE_PERF 0x0201 +#define HV_GRP_DIAG 0x0300 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_get_version(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern unsigned long sun4v_set_version(unsigned long group, + unsigned long major, + unsigned long minor, + unsigned long *actual_minor); + +extern int sun4v_hvapi_register(unsigned long group, unsigned long major, + unsigned long *minor); +extern void sun4v_hvapi_unregister(unsigned long group); +extern int sun4v_hvapi_get(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern void sun4v_hvapi_init(void); +#endif + +#endif /* !(_SPARC64_HYPERVISOR_H) */ diff --git a/include/asm-sparc/intr_queue.h b/include/asm-sparc/intr_queue.h new file mode 100644 index 00000000000..206077dedc2 --- /dev/null +++ b/include/asm-sparc/intr_queue.h @@ -0,0 +1,15 @@ +#ifndef _SPARC64_INTR_QUEUE_H +#define _SPARC64_INTR_QUEUE_H + +/* Sun4v interrupt queue registers, accessed via ASI_QUEUE. */ + +#define INTRQ_CPU_MONDO_HEAD 0x3c0 /* CPU mondo head */ +#define INTRQ_CPU_MONDO_TAIL 0x3c8 /* CPU mondo tail */ +#define INTRQ_DEVICE_MONDO_HEAD 0x3d0 /* Device mondo head */ +#define INTRQ_DEVICE_MONDO_TAIL 0x3d8 /* Device mondo tail */ +#define INTRQ_RESUM_MONDO_HEAD 0x3e0 /* Resumable error mondo head */ +#define INTRQ_RESUM_MONDO_TAIL 0x3e8 /* Resumable error mondo tail */ +#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */ +#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */ + +#endif /* !(_SPARC64_INTR_QUEUE_H) */ diff --git a/include/asm-sparc/kprobes.h b/include/asm-sparc/kprobes.h new file mode 100644 index 00000000000..5879d71afda --- /dev/null +++ b/include/asm-sparc/kprobes.h @@ -0,0 +1,49 @@ +#ifndef _SPARC64_KPROBES_H +#define _SPARC64_KPROBES_H + +#include <linux/types.h> +#include <linux/percpu.h> + +typedef u32 kprobe_opcode_t; + +#define BREAKPOINT_INSTRUCTION 0x91d02070 /* ta 0x70 */ +#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */ +#define MAX_INSN_SIZE 2 + +#define kretprobe_blacklist_size 0 + +#define arch_remove_kprobe(p) do {} while (0) + +#define flush_insn_slot(p) \ +do { flushi(&(p)->ainsn.insn[0]); \ + flushi(&(p)->ainsn.insn[1]); \ +} while (0) + +void kretprobe_trampoline(void); + +/* Architecture specific copy of original instruction*/ +struct arch_specific_insn { + /* copy of the original instruction */ + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long orig_tnpc; + unsigned long orig_tstate_pil; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_orig_tnpc; + unsigned long kprobe_orig_tstate_pil; + struct pt_regs jprobe_saved_regs; + struct prev_kprobe prev_kprobe; +}; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +#endif /* _SPARC64_KPROBES_H */ diff --git a/include/asm-sparc/ldc.h b/include/asm-sparc/ldc.h new file mode 100644 index 00000000000..bdb524a7b81 --- /dev/null +++ b/include/asm-sparc/ldc.h @@ -0,0 +1,138 @@ +#ifndef _SPARC64_LDC_H +#define _SPARC64_LDC_H + +#include <asm/hypervisor.h> + +extern int ldom_domaining_enabled; +extern void ldom_set_var(const char *var, const char *value); +extern void ldom_reboot(const char *boot_command); +extern void ldom_power_off(void); + +/* The event handler will be evoked when link state changes + * or data becomes available on the receive side. + * + * For non-RAW links, if the LDC_EVENT_RESET event arrives the + * driver should reset all of it's internal state and reinvoke + * ldc_connect() to try and bring the link up again. + * + * For RAW links, ldc_connect() is not used. Instead the driver + * just waits for the LDC_EVENT_UP event. + */ +struct ldc_channel_config { + void (*event)(void *arg, int event); + + u32 mtu; + unsigned int rx_irq; + unsigned int tx_irq; + u8 mode; +#define LDC_MODE_RAW 0x00 +#define LDC_MODE_UNRELIABLE 0x01 +#define LDC_MODE_RESERVED 0x02 +#define LDC_MODE_STREAM 0x03 + + u8 debug; +#define LDC_DEBUG_HS 0x01 +#define LDC_DEBUG_STATE 0x02 +#define LDC_DEBUG_RX 0x04 +#define LDC_DEBUG_TX 0x08 +#define LDC_DEBUG_DATA 0x10 +}; + +#define LDC_EVENT_RESET 0x01 +#define LDC_EVENT_UP 0x02 +#define LDC_EVENT_DATA_READY 0x04 + +#define LDC_STATE_INVALID 0x00 +#define LDC_STATE_INIT 0x01 +#define LDC_STATE_BOUND 0x02 +#define LDC_STATE_READY 0x03 +#define LDC_STATE_CONNECTED 0x04 + +struct ldc_channel; + +/* Allocate state for a channel. */ +extern struct ldc_channel *ldc_alloc(unsigned long id, + const struct ldc_channel_config *cfgp, + void *event_arg); + +/* Shut down and free state for a channel. */ +extern void ldc_free(struct ldc_channel *lp); + +/* Register TX and RX queues of the link with the hypervisor. */ +extern int ldc_bind(struct ldc_channel *lp, const char *name); + +/* For non-RAW protocols we need to complete a handshake before + * communication can proceed. ldc_connect() does that, if the + * handshake completes successfully, an LDC_EVENT_UP event will + * be sent up to the driver. + */ +extern int ldc_connect(struct ldc_channel *lp); +extern int ldc_disconnect(struct ldc_channel *lp); + +extern int ldc_state(struct ldc_channel *lp); + +/* Read and write operations. Only valid when the link is up. */ +extern int ldc_write(struct ldc_channel *lp, const void *buf, + unsigned int size); +extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size); + +#define LDC_MAP_SHADOW 0x01 +#define LDC_MAP_DIRECT 0x02 +#define LDC_MAP_IO 0x04 +#define LDC_MAP_R 0x08 +#define LDC_MAP_W 0x10 +#define LDC_MAP_X 0x20 +#define LDC_MAP_RW (LDC_MAP_R | LDC_MAP_W) +#define LDC_MAP_RWX (LDC_MAP_R | LDC_MAP_W | LDC_MAP_X) +#define LDC_MAP_ALL 0x03f + +struct ldc_trans_cookie { + u64 cookie_addr; + u64 cookie_size; +}; + +struct scatterlist; +extern int ldc_map_sg(struct ldc_channel *lp, + struct scatterlist *sg, int num_sg, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm); + +extern int ldc_map_single(struct ldc_channel *lp, + void *buf, unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm); + +extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies, + int ncookies); + +extern int ldc_copy(struct ldc_channel *lp, int copy_dir, + void *buf, unsigned int len, unsigned long offset, + struct ldc_trans_cookie *cookies, int ncookies); + +static inline int ldc_get_dring_entry(struct ldc_channel *lp, + void *buf, unsigned int len, + unsigned long offset, + struct ldc_trans_cookie *cookies, + int ncookies) +{ + return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies); +} + +static inline int ldc_put_dring_entry(struct ldc_channel *lp, + void *buf, unsigned int len, + unsigned long offset, + struct ldc_trans_cookie *cookies, + int ncookies) +{ + return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies); +} + +extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len, + struct ldc_trans_cookie *cookies, + int *ncookies, unsigned int map_perm); + +extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf, + unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies); + +#endif /* _SPARC64_LDC_H */ diff --git a/include/asm-sparc/lmb.h b/include/asm-sparc/lmb.h new file mode 100644 index 00000000000..6a352cbcf52 --- /dev/null +++ b/include/asm-sparc/lmb.h @@ -0,0 +1,10 @@ +#ifndef _SPARC64_LMB_H +#define _SPARC64_LMB_H + +#include <asm/oplib.h> + +#define LMB_DBG(fmt...) prom_printf(fmt) + +#define LMB_REAL_LIMIT 0 + +#endif /* !(_SPARC64_LMB_H) */ diff --git a/include/asm-sparc/lsu.h b/include/asm-sparc/lsu.h new file mode 100644 index 00000000000..7190f8de90a --- /dev/null +++ b/include/asm-sparc/lsu.h @@ -0,0 +1,19 @@ +#ifndef _SPARC64_LSU_H +#define _SPARC64_LSU_H + +#include <linux/const.h> + +/* LSU Control Register */ +#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/ +#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/ +#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/ +#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/ +#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/ +#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/ +#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables. */ +#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable. */ +#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable. */ +#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable. */ +#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/ + +#endif /* !(_SPARC64_LSU_H) */ diff --git a/include/asm-sparc/mdesc.h b/include/asm-sparc/mdesc.h new file mode 100644 index 00000000000..1acc7272e53 --- /dev/null +++ b/include/asm-sparc/mdesc.h @@ -0,0 +1,78 @@ +#ifndef _SPARC64_MDESC_H +#define _SPARC64_MDESC_H + +#include <linux/types.h> +#include <linux/cpumask.h> +#include <asm/prom.h> + +struct mdesc_handle; + +/* Machine description operations are to be surrounded by grab and + * release calls. The mdesc_handle returned from the grab is + * the first argument to all of the operational calls that work + * on mdescs. + */ +extern struct mdesc_handle *mdesc_grab(void); +extern void mdesc_release(struct mdesc_handle *); + +#define MDESC_NODE_NULL (~(u64)0) + +extern u64 mdesc_node_by_name(struct mdesc_handle *handle, + u64 from_node, const char *name); +#define mdesc_for_each_node_by_name(__hdl, __node, __name) \ + for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \ + (__node) != MDESC_NODE_NULL; \ + __node = mdesc_node_by_name(__hdl, __node, __name)) + +/* Access to property values returned from mdesc_get_property() are + * only valid inside of a mdesc_grab()/mdesc_release() sequence. + * Once mdesc_release() is called, the memory backed up by these + * pointers may reference freed up memory. + * + * Therefore callers must make copies of any property values + * they need. + * + * These same rules apply to mdesc_node_name(). + */ +extern const void *mdesc_get_property(struct mdesc_handle *handle, + u64 node, const char *name, int *lenp); +extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node); + +/* MD arc iteration, the standard sequence is: + * + * unsigned long arc; + * mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) { + * unsigned long target = mdesc_arc_target(handle, arc); + * ... + * } + */ + +#define MDESC_ARC_TYPE_FWD "fwd" +#define MDESC_ARC_TYPE_BACK "back" + +extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from, + const char *arc_type); +#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \ + for (__arc = mdesc_next_arc(__hdl, __node, __type); \ + (__arc) != MDESC_NODE_NULL; \ + __arc = mdesc_next_arc(__hdl, __arc, __type)) + +extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc); + +extern void mdesc_update(void); + +struct mdesc_notifier_client { + void (*add)(struct mdesc_handle *handle, u64 node); + void (*remove)(struct mdesc_handle *handle, u64 node); + + const char *node_name; + struct mdesc_notifier_client *next; +}; + +extern void mdesc_register_notifier(struct mdesc_notifier_client *client); + +extern void mdesc_fill_in_cpu_data(cpumask_t mask); + +extern void sun4v_mdesc_init(void); + +#endif diff --git a/include/asm-sparc/mmzone.h b/include/asm-sparc/mmzone.h new file mode 100644 index 00000000000..ebf5986c12e --- /dev/null +++ b/include/asm-sparc/mmzone.h @@ -0,0 +1,17 @@ +#ifndef _SPARC64_MMZONE_H +#define _SPARC64_MMZONE_H + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; + +#define NODE_DATA(nid) (node_data[nid]) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) + +extern int numa_cpu_lookup_table[]; +extern cpumask_t numa_cpumask_lookup_table[]; + +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#endif /* _SPARC64_MMZONE_H */ diff --git a/include/asm-sparc/ns87303.h b/include/asm-sparc/ns87303.h new file mode 100644 index 00000000000..686defe6aaa --- /dev/null +++ b/include/asm-sparc/ns87303.h @@ -0,0 +1,118 @@ +/* ns87303.h: Configuration Register Description for the + * National Semiconductor PC87303 (SuperIO). + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC_NS87303_H +#define _SPARC_NS87303_H 1 + +/* + * Control Register Index Values + */ +#define FER 0x00 +#define FAR 0x01 +#define PTR 0x02 +#define FCR 0x03 +#define PCR 0x04 +#define KRR 0x05 +#define PMC 0x06 +#define TUP 0x07 +#define SID 0x08 +#define ASC 0x09 +#define CS0CF0 0x0a +#define CS0CF1 0x0b +#define CS1CF0 0x0c +#define CS1CF1 0x0d + +/* Function Enable Register (FER) bits */ +#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */ + +/* Function Address Register (FAR) bits */ +#define FAR_LPT_MASK 0x03 +#define FAR_LPTB 0x00 +#define FAR_LPTA 0x01 +#define FAR_LPTC 0x02 + +/* Power and Test Register (PTR) bits */ +#define PTR_LPTB_IRQ7 0x08 +#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ +#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ + /* of the parallel port */ + +/* Function Control Register (FCR) bits */ +#define FCR_LDE 0x10 /* Logical Drive Exchange */ +#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */ + +/* Printer Control Register (PCR) bits */ +#define PCR_EPP_ENABLE 0x01 +#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */ +#define PCR_ECP_ENABLE 0x04 +#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */ +#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */ + /* if 1 polarity is inverted */ +#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */ + +/* Tape UARTs and Parallel Port Config Register (TUP) bits */ +#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */ + +/* Advanced SuperIO Config Register (ASC) bits */ +#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */ +#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */ + +#define FER_RESERVED 0x00 +#define FAR_RESERVED 0x00 +#define PTR_RESERVED 0x73 +#define FCR_RESERVED 0xc4 +#define PCR_RESERVED 0x10 +#define KRR_RESERVED 0x00 +#define PMC_RESERVED 0x98 +#define TUP_RESERVED 0xfb +#define SIP_RESERVED 0x00 +#define ASC_RESERVED 0x18 +#define CS0CF0_RESERVED 0x00 +#define CS0CF1_RESERVED 0x08 +#define CS1CF0_RESERVED 0x00 +#define CS1CF1_RESERVED 0x08 + +#ifdef __KERNEL__ + +#include <linux/spinlock.h> + +#include <asm/system.h> +#include <asm/io.h> + +extern spinlock_t ns87303_lock; + +static inline int ns87303_modify(unsigned long port, unsigned int index, + unsigned char clr, unsigned char set) +{ + static unsigned char reserved[] = { + FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED, + PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED, + SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED, + CS1CF0_RESERVED, CS1CF1_RESERVED + }; + unsigned long flags; + unsigned char value; + + if (index > 0x0d) + return -EINVAL; + + spin_lock_irqsave(&ns87303_lock, flags); + + outb(index, port); + value = inb(port + 1); + value &= ~(reserved[index] | clr); + value |= set; + outb(value, port + 1); + outb(value, port + 1); + + spin_unlock_irqrestore(&ns87303_lock, flags); + + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* !(_SPARC_NS87303_H) */ diff --git a/include/asm-sparc/parport.h b/include/asm-sparc/parport.h new file mode 100644 index 00000000000..7818b2523b8 --- /dev/null +++ b/include/asm-sparc/parport.h @@ -0,0 +1,246 @@ +/* parport.h: sparc64 specific parport initialization and dma. + * + * Copyright (C) 1999 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _ASM_SPARC64_PARPORT_H +#define _ASM_SPARC64_PARPORT_H 1 + +#include <asm/ebus.h> +#include <asm/ns87303.h> +#include <asm/of_device.h> +#include <asm/prom.h> + +#define PARPORT_PC_MAX_PORTS PARPORT_MAX + +/* + * While sparc64 doesn't have an ISA DMA API, we provide something that looks + * close enough to make parport_pc happy + */ +#define HAS_DMA + +static DEFINE_SPINLOCK(dma_spin_lock); + +#define claim_dma_lock() \ +({ unsigned long flags; \ + spin_lock_irqsave(&dma_spin_lock, flags); \ + flags; \ +}) + +#define release_dma_lock(__flags) \ + spin_unlock_irqrestore(&dma_spin_lock, __flags); + +static struct sparc_ebus_info { + struct ebus_dma_info info; + unsigned int addr; + unsigned int count; + int lock; + + struct parport *port; +} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS]; + +static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS); + +static inline int request_dma(unsigned int dmanr, const char *device_id) +{ + if (dmanr >= PARPORT_PC_MAX_PORTS) + return -EINVAL; + if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0) + return -EBUSY; + return 0; +} + +static inline void free_dma(unsigned int dmanr) +{ + if (dmanr >= PARPORT_PC_MAX_PORTS) { + printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); + return; + } + if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) { + printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); + return; + } +} + +static inline void enable_dma(unsigned int dmanr) +{ + ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1); + + if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info, + sparc_ebus_dmas[dmanr].addr, + sparc_ebus_dmas[dmanr].count)) + BUG(); +} + +static inline void disable_dma(unsigned int dmanr) +{ + ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0); +} + +static inline void clear_dma_ff(unsigned int dmanr) +{ + /* nothing */ +} + +static inline void set_dma_mode(unsigned int dmanr, char mode) +{ + ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE)); +} + +static inline void set_dma_addr(unsigned int dmanr, unsigned int addr) +{ + sparc_ebus_dmas[dmanr].addr = addr; +} + +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ + sparc_ebus_dmas[dmanr].count = count; +} + +static inline unsigned int get_dma_residue(unsigned int dmanr) +{ + return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); +} + +static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match) +{ + unsigned long base = op->resource[0].start; + unsigned long config = op->resource[1].start; + unsigned long d_base = op->resource[2].start; + unsigned long d_len; + struct device_node *parent; + struct parport *p; + int slot, err; + + parent = op->node->parent; + if (!strcmp(parent->name, "dma")) { + p = parport_pc_probe_port(base, base + 0x400, + op->irqs[0], PARPORT_DMA_NOFIFO, + op->dev.parent->parent); + if (!p) + return -ENOMEM; + dev_set_drvdata(&op->dev, p); + return 0; + } + + for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) { + if (!test_and_set_bit(slot, dma_slot_map)) + break; + } + err = -ENODEV; + if (slot >= PARPORT_PC_MAX_PORTS) + goto out_err; + + spin_lock_init(&sparc_ebus_dmas[slot].info.lock); + + d_len = (op->resource[2].end - d_base) + 1UL; + sparc_ebus_dmas[slot].info.regs = + of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA"); + + if (!sparc_ebus_dmas[slot].info.regs) + goto out_clear_map; + + sparc_ebus_dmas[slot].info.flags = 0; + sparc_ebus_dmas[slot].info.callback = NULL; + sparc_ebus_dmas[slot].info.client_cookie = NULL; + sparc_ebus_dmas[slot].info.irq = 0xdeadbeef; + strcpy(sparc_ebus_dmas[slot].info.name, "parport"); + if (ebus_dma_register(&sparc_ebus_dmas[slot].info)) + goto out_unmap_regs; + + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1); + + /* Configure IRQ to Push Pull, Level Low */ + /* Enable ECP, set bit 2 of the CTR first */ + outb(0x04, base + 0x02); + ns87303_modify(config, PCR, + PCR_EPP_ENABLE | + PCR_IRQ_ODRAIN, + PCR_ECP_ENABLE | + PCR_ECP_CLK_ENA | + PCR_IRQ_POLAR); + + /* CTR bit 5 controls direction of port */ + ns87303_modify(config, PTR, + 0, PTR_LPT_REG_DIR); + + p = parport_pc_probe_port(base, base + 0x400, + op->irqs[0], + slot, + op->dev.parent); + err = -ENOMEM; + if (!p) + goto out_disable_irq; + + dev_set_drvdata(&op->dev, p); + + return 0; + +out_disable_irq: + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); + ebus_dma_unregister(&sparc_ebus_dmas[slot].info); + +out_unmap_regs: + of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len); + +out_clear_map: + clear_bit(slot, dma_slot_map); + +out_err: + return err; +} + +static int __devexit ecpp_remove(struct of_device *op) +{ + struct parport *p = dev_get_drvdata(&op->dev); + int slot = p->dma; + + parport_pc_unregister_port(p); + + if (slot != PARPORT_DMA_NOFIFO) { + unsigned long d_base = op->resource[2].start; + unsigned long d_len; + + d_len = (op->resource[2].end - d_base) + 1UL; + + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); + ebus_dma_unregister(&sparc_ebus_dmas[slot].info); + of_iounmap(&op->resource[2], + sparc_ebus_dmas[slot].info.regs, + d_len); + clear_bit(slot, dma_slot_map); + } + + return 0; +} + +static struct of_device_id ecpp_match[] = { + { + .name = "ecpp", + }, + { + .name = "parallel", + .compatible = "ecpp", + }, + { + .name = "parallel", + .compatible = "ns87317-ecpp", + }, + {}, +}; + +static struct of_platform_driver ecpp_driver = { + .name = "ecpp", + .match_table = ecpp_match, + .probe = ecpp_probe, + .remove = __devexit_p(ecpp_remove), +}; + +static int parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + of_register_driver(&ecpp_driver, &of_bus_type); + + return 0; +} + +#endif /* !(_ASM_SPARC64_PARPORT_H */ diff --git a/include/asm-sparc/pil.h b/include/asm-sparc/pil.h new file mode 100644 index 00000000000..eaac842d88c --- /dev/null +++ b/include/asm-sparc/pil.h @@ -0,0 +1,21 @@ +#ifndef _SPARC64_PIL_H +#define _SPARC64_PIL_H + +/* To avoid some locking problems, we hard allocate certain PILs + * for SMP cross call messages that must do a etrap/rtrap. + * + * A local_irq_disable() does not block the cross call delivery, so + * when SMP locking is an issue we reschedule the event into a PIL + * interrupt which is blocked by local_irq_disable(). + * + * In fact any XCALL which has to etrap/rtrap has a problem because + * it is difficult to prevent rtrap from running BH's, and that would + * need to be done if the XCALL arrived while %pil==15. + */ +#define PIL_SMP_CALL_FUNC 1 +#define PIL_SMP_RECEIVE_SIGNAL 2 +#define PIL_SMP_CAPTURE 3 +#define PIL_SMP_CTX_NEW_VERSION 4 +#define PIL_DEVICE_IRQ 5 + +#endif /* !(_SPARC64_PIL_H) */ diff --git a/include/asm-sparc/reboot.h b/include/asm-sparc/reboot.h new file mode 100644 index 00000000000..3f3f43f5be5 --- /dev/null +++ b/include/asm-sparc/reboot.h @@ -0,0 +1,6 @@ +#ifndef _SPARC64_REBOOT_H +#define _SPARC64_REBOOT_H + +extern void machine_alt_power_off(void); + +#endif /* _SPARC64_REBOOT_H */ diff --git a/include/asm-sparc/rwsem-const.h b/include/asm-sparc/rwsem-const.h new file mode 100644 index 00000000000..a303c9d64d8 --- /dev/null +++ b/include/asm-sparc/rwsem-const.h @@ -0,0 +1,12 @@ +/* rwsem-const.h: RW semaphore counter constants. */ +#ifndef _SPARC64_RWSEM_CONST_H +#define _SPARC64_RWSEM_CONST_H + +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS 0xffff0000 +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + +#endif /* _SPARC64_RWSEM_CONST_H */ diff --git a/include/asm-sparc/rwsem.h b/include/asm-sparc/rwsem.h new file mode 100644 index 00000000000..1dc129ac2fe --- /dev/null +++ b/include/asm-sparc/rwsem.h @@ -0,0 +1,84 @@ +/* + * rwsem.h: R/W semaphores implemented using CAS + * + * Written by David S. Miller (davem@redhat.com), 2001. + * Derived from asm-i386/rwsem.h + */ +#ifndef _SPARC64_RWSEM_H +#define _SPARC64_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ + +#include <linux/list.h> +#include <linux/spinlock.h> +#include <asm/rwsem-const.h> + +struct rwsem_waiter; + +struct rw_semaphore { + signed int count; + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ +{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + +extern void __down_read(struct rw_semaphore *sem); +extern int __down_read_trylock(struct rw_semaphore *sem); +extern void __down_write(struct rw_semaphore *sem); +extern int __down_write_trylock(struct rw_semaphore *sem); +extern void __up_read(struct rw_semaphore *sem); +extern void __up_write(struct rw_semaphore *sem); +extern void __downgrade_write(struct rw_semaphore *sem); + +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ + +#endif /* _SPARC64_RWSEM_H */ diff --git a/include/asm-sparc/scratchpad.h b/include/asm-sparc/scratchpad.h new file mode 100644 index 00000000000..5e8b01fb334 --- /dev/null +++ b/include/asm-sparc/scratchpad.h @@ -0,0 +1,14 @@ +#ifndef _SPARC64_SCRATCHPAD_H +#define _SPARC64_SCRATCHPAD_H + +/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD. */ + +#define SCRATCHPAD_MMU_MISS 0x00 /* Shared with OBP - set by OBP */ +#define SCRATCHPAD_CPUID 0x08 /* Shared with OBP - set by hypervisor */ +#define SCRATCHPAD_UTSBREG1 0x10 +#define SCRATCHPAD_UTSBREG2 0x18 + /* 0x20 and 0x28, hypervisor only... */ +#define SCRATCHPAD_UNUSED1 0x30 +#define SCRATCHPAD_UNUSED2 0x38 /* Reserved for OBP */ + +#endif /* !(_SPARC64_SCRATCHPAD_H) */ diff --git a/include/asm-sparc/seccomp.h b/include/asm-sparc/seccomp.h new file mode 100644 index 00000000000..7fcd9968192 --- /dev/null +++ b/include/asm-sparc/seccomp.h @@ -0,0 +1,21 @@ +#ifndef _ASM_SECCOMP_H + +#include <linux/thread_info.h> /* already defines TIF_32BIT */ + +#ifndef TIF_32BIT +#error "unexpected TIF_32BIT on sparc64" +#endif + +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#define __NR_seccomp_read_32 __NR_read +#define __NR_seccomp_write_32 __NR_write +#define __NR_seccomp_exit_32 __NR_exit +#define __NR_seccomp_sigreturn_32 __NR_sigreturn + +#endif /* _ASM_SECCOMP_H */ diff --git a/include/asm-sparc/sfafsr.h b/include/asm-sparc/sfafsr.h new file mode 100644 index 00000000000..e96137b04a4 --- /dev/null +++ b/include/asm-sparc/sfafsr.h @@ -0,0 +1,82 @@ +#ifndef _SPARC64_SFAFSR_H +#define _SPARC64_SFAFSR_H + +#include <linux/const.h> + +/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ + +#define SFAFSR_ME (_AC(1,UL) << SFAFSR_ME_SHIFT) +#define SFAFSR_ME_SHIFT 32 +#define SFAFSR_PRIV (_AC(1,UL) << SFAFSR_PRIV_SHIFT) +#define SFAFSR_PRIV_SHIFT 31 +#define SFAFSR_ISAP (_AC(1,UL) << SFAFSR_ISAP_SHIFT) +#define SFAFSR_ISAP_SHIFT 30 +#define SFAFSR_ETP (_AC(1,UL) << SFAFSR_ETP_SHIFT) +#define SFAFSR_ETP_SHIFT 29 +#define SFAFSR_IVUE (_AC(1,UL) << SFAFSR_IVUE_SHIFT) +#define SFAFSR_IVUE_SHIFT 28 +#define SFAFSR_TO (_AC(1,UL) << SFAFSR_TO_SHIFT) +#define SFAFSR_TO_SHIFT 27 +#define SFAFSR_BERR (_AC(1,UL) << SFAFSR_BERR_SHIFT) +#define SFAFSR_BERR_SHIFT 26 +#define SFAFSR_LDP (_AC(1,UL) << SFAFSR_LDP_SHIFT) +#define SFAFSR_LDP_SHIFT 25 +#define SFAFSR_CP (_AC(1,UL) << SFAFSR_CP_SHIFT) +#define SFAFSR_CP_SHIFT 24 +#define SFAFSR_WP (_AC(1,UL) << SFAFSR_WP_SHIFT) +#define SFAFSR_WP_SHIFT 23 +#define SFAFSR_EDP (_AC(1,UL) << SFAFSR_EDP_SHIFT) +#define SFAFSR_EDP_SHIFT 22 +#define SFAFSR_UE (_AC(1,UL) << SFAFSR_UE_SHIFT) +#define SFAFSR_UE_SHIFT 21 +#define SFAFSR_CE (_AC(1,UL) << SFAFSR_CE_SHIFT) +#define SFAFSR_CE_SHIFT 20 +#define SFAFSR_ETS (_AC(0xf,UL) << SFAFSR_ETS_SHIFT) +#define SFAFSR_ETS_SHIFT 16 +#define SFAFSR_PSYND (_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT) +#define SFAFSR_PSYND_SHIFT 0 + +/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read + * ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write + */ + +#define UDBE_UE (_AC(1,UL) << 9) +#define UDBE_CE (_AC(1,UL) << 8) +#define UDBE_E_SYNDR (_AC(0xff,UL) << 0) + +/* The trap handlers for asynchronous errors encode the AFSR and + * other pieces of information into a 64-bit argument for C code + * encoded as follows: + * + * ----------------------------------------------- + * | UDB_H | UDB_L | TL>1 | TT | AFSR | + * ----------------------------------------------- + * 63 54 53 44 42 41 33 32 0 + * + * The AFAR is passed in unchanged. + */ +#define SFSTAT_UDBH_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) +#define SFSTAT_UDBH_SHIFT 54 +#define SFSTAT_UDBL_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) +#define SFSTAT_UDBL_SHIFT 44 +#define SFSTAT_TL_GT_ONE (_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT) +#define SFSTAT_TL_GT_ONE_SHIFT 42 +#define SFSTAT_TRAP_TYPE (_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT) +#define SFSTAT_TRAP_TYPE_SHIFT 33 +#define SFSTAT_AFSR_MASK (_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT) +#define SFSTAT_AFSR_SHIFT 0 + +/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */ +#define ESTATE_ERR_CE 0x1 /* Correctable errors */ +#define ESTATE_ERR_NCE 0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */ +#define ESTATE_ERR_ISAP 0x4 /* System address parity error */ +#define ESTATE_ERR_ALL (ESTATE_ERR_CE | \ + ESTATE_ERR_NCE | \ + ESTATE_ERR_ISAP) + +/* The various trap types that report using the above state. */ +#define TRAP_TYPE_IAE 0x09 /* Instruction Access Error */ +#define TRAP_TYPE_DAE 0x32 /* Data Access Error */ +#define TRAP_TYPE_CEE 0x63 /* Correctable ECC Error */ + +#endif /* _SPARC64_SFAFSR_H */ diff --git a/include/asm-sparc/sparsemem.h b/include/asm-sparc/sparsemem.h new file mode 100644 index 00000000000..b99d4e4b6d2 --- /dev/null +++ b/include/asm-sparc/sparsemem.h @@ -0,0 +1,12 @@ +#ifndef _SPARC64_SPARSEMEM_H +#define _SPARC64_SPARSEMEM_H + +#ifdef __KERNEL__ + +#define SECTION_SIZE_BITS 30 +#define MAX_PHYSADDR_BITS 42 +#define MAX_PHYSMEM_BITS 42 + +#endif /* !(__KERNEL__) */ + +#endif /* !(_SPARC64_SPARSEMEM_H) */ diff --git a/include/asm-sparc/spitfire.h b/include/asm-sparc/spitfire.h new file mode 100644 index 00000000000..985ea7e3199 --- /dev/null +++ b/include/asm-sparc/spitfire.h @@ -0,0 +1,342 @@ +/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_SPITFIRE_H +#define _SPARC64_SPITFIRE_H + +#include <asm/asi.h> + +/* The following register addresses are accessible via ASI_DMMU + * and ASI_IMMU, that is there is a distinct and unique copy of + * each these registers for each TLB. + */ +#define TSB_TAG_TARGET 0x0000000000000000 /* All chips */ +#define TLB_SFSR 0x0000000000000018 /* All chips */ +#define TSB_REG 0x0000000000000028 /* All chips */ +#define TLB_TAG_ACCESS 0x0000000000000030 /* All chips */ +#define VIRT_WATCHPOINT 0x0000000000000038 /* All chips */ +#define PHYS_WATCHPOINT 0x0000000000000040 /* All chips */ +#define TSB_EXTENSION_P 0x0000000000000048 /* Ultra-III and later */ +#define TSB_EXTENSION_S 0x0000000000000050 /* Ultra-III and later, D-TLB only */ +#define TSB_EXTENSION_N 0x0000000000000058 /* Ultra-III and later */ +#define TLB_TAG_ACCESS_EXT 0x0000000000000060 /* Ultra-III+ and later */ + +/* These registers only exist as one entity, and are accessed + * via ASI_DMMU only. + */ +#define PRIMARY_CONTEXT 0x0000000000000008 +#define SECONDARY_CONTEXT 0x0000000000000010 +#define DMMU_SFAR 0x0000000000000020 +#define VIRT_WATCHPOINT 0x0000000000000038 +#define PHYS_WATCHPOINT 0x0000000000000040 + +#define SPITFIRE_HIGHEST_LOCKED_TLBENT (64 - 1) +#define CHEETAH_HIGHEST_LOCKED_TLBENT (16 - 1) + +#define L1DCACHE_SIZE 0x4000 + +#define SUN4V_CHIP_INVALID 0x00 +#define SUN4V_CHIP_NIAGARA1 0x01 +#define SUN4V_CHIP_NIAGARA2 0x02 +#define SUN4V_CHIP_UNKNOWN 0xff + +#ifndef __ASSEMBLY__ + +enum ultra_tlb_layout { + spitfire = 0, + cheetah = 1, + cheetah_plus = 2, + hypervisor = 3, +}; + +extern enum ultra_tlb_layout tlb_type; + +extern int sun4v_chip_type; + +extern int cheetah_pcache_forced_on; +extern void cheetah_enable_pcache(void); + +#define sparc64_highest_locked_tlbent() \ + (tlb_type == spitfire ? \ + SPITFIRE_HIGHEST_LOCKED_TLBENT : \ + CHEETAH_HIGHEST_LOCKED_TLBENT) + +extern int num_kernel_image_mappings; + +/* The data cache is write through, so this just invalidates the + * specified line. + */ +static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG)); +} + +/* The instruction cache lines are flushed with this, but note that + * this does not flush the pipeline. It is possible for a line to + * get flushed but stale instructions to still be in the pipeline, + * a flush instruction (to any address) is sufficient to handle + * this issue after the line is invalidated. + */ +static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (tag), "r" (addr), "i" (ASI_IC_TAG)); +} + +static inline unsigned long spitfire_get_dtlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (data) + : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS)); + + /* Clear TTE diag bits. */ + data &= ~0x0003fe0000000000UL; + + return data; +} + +static inline unsigned long spitfire_get_dtlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ)); + return tag; +} + +static inline void spitfire_put_dtlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" (entry << 3), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline unsigned long spitfire_get_itlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (data) + : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS)); + + /* Clear TTE diag bits. */ + data &= ~0x0003fe0000000000UL; + + return data; +} + +static inline unsigned long spitfire_get_itlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ)); + return tag; +} + +static inline void spitfire_put_itlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" (entry << 3), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP)); +} + +static inline void spitfire_flush_itlb_nucleus_page(unsigned long page) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP)); +} + +/* Cheetah has "all non-locked" tlb flushes. */ +static inline void cheetah_flush_dtlb_all(void) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (0x80), "i" (ASI_DMMU_DEMAP)); +} + +static inline void cheetah_flush_itlb_all(void) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (0x80), "i" (ASI_IMMU_DEMAP)); +} + +/* Cheetah has a 4-tlb layout so direct access is a bit different. + * The first two TLBs are fully assosciative, hold 16 entries, and are + * used only for locked and >8K sized translations. One exists for + * data accesses and one for instruction accesses. + * + * The third TLB is for data accesses to 8K non-locked translations, is + * 2 way assosciative, and holds 512 entries. The fourth TLB is for + * instruction accesses to 8K non-locked translations, is 2 way + * assosciative, and holds 128 entries. + * + * Cheetah has some bug where bogus data can be returned from + * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes + * the problem for me. -DaveM + */ +static inline unsigned long cheetah_get_ldtlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_litlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_ldtlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_TAG_READ)); + + return tag; +} + +static inline unsigned long cheetah_get_litlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_TAG_READ)); + + return tag; +} + +static inline void cheetah_put_ldtlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline void cheetah_put_litlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ)); + return tag; +} + +static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((tlb << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline unsigned long cheetah_get_itlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((2 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_itlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ)); + return tag; +} + +static inline void cheetah_put_itlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" ((2 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC64_SPITFIRE_H) */ diff --git a/include/asm-sparc/sstate.h b/include/asm-sparc/sstate.h new file mode 100644 index 00000000000..a7c35dbcb28 --- /dev/null +++ b/include/asm-sparc/sstate.h @@ -0,0 +1,13 @@ +#ifndef _SPARC64_SSTATE_H +#define _SPARC64_SSTATE_H + +extern void sstate_booting(void); +extern void sstate_running(void); +extern void sstate_halt(void); +extern void sstate_poweroff(void); +extern void sstate_panic(void); +extern void sstate_reboot(void); + +extern void sun4v_sstate_init(void); + +#endif /* _SPARC64_SSTATE_H */ diff --git a/include/asm-sparc/stacktrace.h b/include/asm-sparc/stacktrace.h new file mode 100644 index 00000000000..6cee39adf6d --- /dev/null +++ b/include/asm-sparc/stacktrace.h @@ -0,0 +1,6 @@ +#ifndef _SPARC64_STACKTRACE_H +#define _SPARC64_STACKTRACE_H + +extern void stack_trace_flush(void); + +#endif /* _SPARC64_STACKTRACE_H */ diff --git a/include/asm-sparc/starfire.h b/include/asm-sparc/starfire.h new file mode 100644 index 00000000000..07bafd31e33 --- /dev/null +++ b/include/asm-sparc/starfire.h @@ -0,0 +1,21 @@ +/* + * starfire.h: Group all starfire specific code together. + * + * Copyright (C) 2000 Anton Blanchard (anton@samba.org) + */ + +#ifndef _SPARC64_STARFIRE_H +#define _SPARC64_STARFIRE_H + +#ifndef __ASSEMBLY__ + +extern int this_is_starfire; + +extern void check_if_starfire(void); +extern void starfire_cpu_setup(void); +extern int starfire_hard_smp_processor_id(void); +extern void starfire_hookup(int); +extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid); + +#endif +#endif diff --git a/include/asm-sparc/syscalls.h b/include/asm-sparc/syscalls.h new file mode 100644 index 00000000000..45a43f637a1 --- /dev/null +++ b/include/asm-sparc/syscalls.h @@ -0,0 +1,13 @@ +#ifndef _SPARC64_SYSCALLS_H +#define _SPARC64_SYSCALLS_H + +struct pt_regs; + +extern asmlinkage long sparc_do_fork(unsigned long clone_flags, + unsigned long stack_start, + struct pt_regs *regs, + unsigned long stack_size); + +extern asmlinkage int sparc_execve(struct pt_regs *regs); + +#endif /* _SPARC64_SYSCALLS_H */ diff --git a/include/asm-sparc/tsb.h b/include/asm-sparc/tsb.h new file mode 100644 index 00000000000..76e4299dd9b --- /dev/null +++ b/include/asm-sparc/tsb.h @@ -0,0 +1,283 @@ +#ifndef _SPARC64_TSB_H +#define _SPARC64_TSB_H + +/* The sparc64 TSB is similar to the powerpc hashtables. It's a + * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes + * pointers into this table for 8K and 64K page sizes, and also a + * comparison TAG based upon the virtual address and context which + * faults. + * + * TLB miss trap handler software does the actual lookup via something + * of the form: + * + * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1 + * ldxa [%g0] ASI_{D,I}MMU, %g6 + * sllx %g6, 22, %g6 + * srlx %g6, 22, %g6 + * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 + * cmp %g4, %g6 + * bne,pn %xcc, tsb_miss_{d,i}tlb + * mov FAULT_CODE_{D,I}TLB, %g3 + * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN + * retry + * + * + * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte + * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu + * register which is: + * + * ------------------------------------------------- + * | - | CONTEXT | - | VADDR bits 63:22 | + * ------------------------------------------------- + * 63 61 60 48 47 42 41 0 + * + * But actually, since we use per-mm TSB's, we zero out the CONTEXT + * field. + * + * Like the powerpc hashtables we need to use locking in order to + * synchronize while we update the entries. PTE updates need locking + * as well. + * + * We need to carefully choose a lock bits for the TSB entry. We + * choose to use bit 47 in the tag. Also, since we never map anything + * at page zero in context zero, we use zero as an invalid tag entry. + * When the lock bit is set, this forces a tag comparison failure. + */ + +#define TSB_TAG_LOCK_BIT 47 +#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32)) + +#define TSB_TAG_INVALID_BIT 46 +#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32)) + +#define TSB_MEMBAR membar #StoreStore + +/* Some cpus support physical address quad loads. We want to use + * those if possible so we don't need to hard-lock the TSB mapping + * into the TLB. We encode some instruction patching in order to + * support this. + * + * The kernel TSB is locked into the TLB by virtue of being in the + * kernel image, so we don't play these games for swapper_tsb access. + */ +#ifndef __ASSEMBLY__ +struct tsb_ldquad_phys_patch_entry { + unsigned int addr; + unsigned int sun4u_insn; + unsigned int sun4v_insn; +}; +extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch, + __tsb_ldquad_phys_patch_end; + +struct tsb_phys_patch_entry { + unsigned int addr; + unsigned int insn; +}; +extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; +#endif +#define TSB_LOAD_QUAD(TSB, REG) \ +661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \ + .section .tsb_ldquad_phys_patch, "ax"; \ + .word 661b; \ + ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \ + ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \ + .previous + +#define TSB_LOAD_TAG_HIGH(TSB, REG) \ +661: lduwa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + lduwa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_LOAD_TAG(TSB, REG) \ +661: ldxa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + ldxa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \ +661: casa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_CAS_TAG(TSB, REG1, REG2) \ +661: casxa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_STORE(ADDR, VAL) \ +661: stxa VAL, [ADDR] ASI_N; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + stxa VAL, [ADDR] ASI_PHYS_USE_EC; \ + .previous + +#define TSB_LOCK_TAG(TSB, REG1, REG2) \ +99: TSB_LOAD_TAG_HIGH(TSB, REG1); \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define TSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + TSB_STORE(TSB, TTE); \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + TSB_STORE(TSB, TAG); + +#define KTSB_LOAD_QUAD(TSB, REG) \ + ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; + +#define KTSB_STORE(ADDR, VAL) \ + stxa VAL, [ADDR] ASI_N; + +#define KTSB_LOCK_TAG(TSB, REG1, REG2) \ +99: lduwa [TSB] ASI_N, REG1; \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + casa [TSB] ASI_N, REG1, REG2;\ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define KTSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + stxa TTE, [TSB] ASI_N; \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + stxa TAG, [TSB] ASI_N; + + /* Do a kernel page table walk. Leaves physical PTE pointer in + * REG1. Jumps to FAIL_LABEL on early page table walk termination. + * VADDR will not be clobbered, but REG2 will. + */ +#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \ + sethi %hi(swapper_pg_dir), REG1; \ + or REG1, %lo(swapper_pg_dir), REG1; \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduw [REG1 + REG2], REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + + /* Do a user page table walk in MMU globals. Leaves physical PTE + * pointer in REG1. Jumps to FAIL_LABEL on early page table walk + * termination. Physical base of page tables is in PHYS_PGD which + * will not be modified. + * + * VADDR will not be clobbered, but REG1 and REG2 will. + */ +#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + +/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0. + * If no entry is found, FAIL_LABEL will be branched to. On success + * the resulting PTE value will be left in REG1. VADDR is preserved + * by this routine. + */ +#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \ + sethi %hi(prom_trans), REG1; \ + or REG1, %lo(prom_trans), REG1; \ +97: ldx [REG1 + 0x00], REG2; \ + brz,pn REG2, FAIL_LABEL; \ + nop; \ + ldx [REG1 + 0x08], REG3; \ + add REG2, REG3, REG3; \ + cmp REG2, VADDR; \ + bgu,pt %xcc, 98f; \ + cmp VADDR, REG3; \ + bgeu,pt %xcc, 98f; \ + ldx [REG1 + 0x10], REG3; \ + sub VADDR, REG2, REG2; \ + ba,pt %xcc, 99f; \ + add REG3, REG2, REG1; \ +98: ba,pt %xcc, 97b; \ + add REG1, (3 * 8), REG1; \ +99: + + /* We use a 32K TSB for the whole kernel, this allows to + * handle about 16MB of modules and vmalloc mappings without + * incurring many hash conflicts. + */ +#define KERNEL_TSB_SIZE_BYTES (32 * 1024) +#define KERNEL_TSB_NENTRIES \ + (KERNEL_TSB_SIZE_BYTES / 16) +#define KERNEL_TSB4M_NENTRIES 4096 + + /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL + * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries + * and the found TTE will be left in REG1. REG3 and REG4 must + * be an even/odd pair of registers. + * + * VADDR and TAG will be preserved and not clobbered by this macro. + */ +#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_tsb), REG1; \ + or REG1, %lo(swapper_tsb), REG1; \ + srlx VADDR, PAGE_SHIFT, REG2; \ + and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; + +#ifndef CONFIG_DEBUG_PAGEALLOC + /* This version uses a trick, the TAG is already (VADDR >> 22) so + * we can make use of that for the index computation. + */ +#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_4m_tsb), REG1; \ + or REG1, %lo(swapper_4m_tsb), REG1; \ + and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; +#endif + +#endif /* !(_SPARC64_TSB_H) */ diff --git a/include/asm-sparc/ttable.h b/include/asm-sparc/ttable.h new file mode 100644 index 00000000000..5708ba2719f --- /dev/null +++ b/include/asm-sparc/ttable.h @@ -0,0 +1,658 @@ +#ifndef _SPARC64_TTABLE_H +#define _SPARC64_TTABLE_H + +#include <asm/utrap.h> + +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> +#endif + +#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop; + +/* We need a "cleaned" instruction... */ +#define CLEAN_WINDOW \ + rdpr %cleanwin, %l0; add %l0, 1, %l0; \ + wrpr %l0, 0x0, %cleanwin; \ + clr %o0; clr %o1; clr %o2; clr %o3; \ + clr %o4; clr %o5; clr %o6; clr %o7; \ + clr %l0; clr %l1; clr %l2; clr %l3; \ + clr %l4; clr %l5; clr %l6; clr %l7; \ + retry; \ + nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop; + +#define TRAP(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_7INSNS(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; + +#define TRAP_SAVEFPU(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, do_fptrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_NOSAVE(routine) \ + ba,pt %xcc, routine; \ + nop; \ + nop; nop; nop; nop; nop; nop; + +#define TRAP_NOSAVE_7INSNS(routine) \ + ba,pt %xcc, routine; \ + nop; \ + nop; nop; nop; nop; nop; + +#define TRAPTL1(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etraptl1; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_ARG(routine, arg) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + add %sp, PTREGS_OFF, %o0; \ + call routine; \ + mov arg, %o1; \ + ba,pt %xcc, rtrap; \ + nop; + +#define TRAPTL1_ARG(routine, arg) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etraptl1; \ +109: or %g7, %lo(109b), %g7; \ + add %sp, PTREGS_OFF, %o0; \ + call routine; \ + mov arg, %o1; \ + ba,pt %xcc, rtrap; \ + nop; + +#define SYSCALL_TRAP(routine, systbl) \ + rdpr %pil, %g2; \ + mov TSTATE_SYSCALL, %g3; \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap_syscall; \ +109: or %g7, %lo(109b), %g7; \ + sethi %hi(systbl), %l7; \ + ba,pt %xcc, routine; \ + or %l7, %lo(systbl), %l7; + +#define TRAP_UTRAP(handler,lvl) \ + mov handler, %g3; \ + ba,pt %xcc, utrap_trap; \ + mov lvl, %g4; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; + +#ifdef CONFIG_COMPAT +#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32) +#else +#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110) +#endif +#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64) +#define GETCC_TRAP TRAP(getcc) +#define SETCC_TRAP TRAP(setcc) +#define BREAKPOINT_TRAP TRAP(breakpoint_trap) + +#ifdef CONFIG_TRACE_IRQFLAGS + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#else + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + ba,pt %xcc, etrap_irq; \ + rd %pc, %g7; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; + +#endif + +#define TRAP_IVEC TRAP_NOSAVE(do_ivec) + +#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl) + +#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl) + +#define FLUSH_WINDOW_TRAP \ + ba,pt %xcc, etrap; \ + rd %pc, %g7; \ + flushw; \ + ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \ + add %l1, 4, %l2; \ + stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \ + ba,pt %xcc, rtrap; \ + stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]; + +#ifdef CONFIG_KPROBES +#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl) +#else +#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl) +#endif + +#ifdef CONFIG_KGDB +#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl) +#else +#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl) +#endif + +#define SUN4V_ITSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_itsb_miss; \ + nop; \ + nop; \ + nop; + +#define SUN4V_DTSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_dtsb_miss; \ + nop; \ + nop; \ + nop; + +/* Before touching these macros, you owe it to yourself to go and + * see how arch/sparc64/kernel/winfixup.S works... -DaveM + * + * For the user cases we used to use the %asi register, but + * it turns out that the "wr xxx, %asi" costs ~5 cycles, so + * now we use immediate ASI loads and stores instead. Kudos + * to Greg Onufer for pointing out this performance anomaly. + * + * Further note that we cannot use the g2, g4, g5, and g7 alternate + * globals in the spill routines, check out the save instruction in + * arch/sparc64/kernel/etrap.S to see what I mean about g2, and + * g4/g5 are the globals which are preserved by etrap processing + * for the caller of it. The g7 register is the return pc for + * etrap. Finally, g6 is the current thread register so we cannot + * us it in the spill handlers either. Most of these rules do not + * apply to fill processing, only g6 is not usable. + */ + +/* Normal kernel spill */ +#define SPILL_0_NORMAL \ + stx %l0, [%sp + STACK_BIAS + 0x00]; \ + stx %l1, [%sp + STACK_BIAS + 0x08]; \ + stx %l2, [%sp + STACK_BIAS + 0x10]; \ + stx %l3, [%sp + STACK_BIAS + 0x18]; \ + stx %l4, [%sp + STACK_BIAS + 0x20]; \ + stx %l5, [%sp + STACK_BIAS + 0x28]; \ + stx %l6, [%sp + STACK_BIAS + 0x30]; \ + stx %l7, [%sp + STACK_BIAS + 0x38]; \ + stx %i0, [%sp + STACK_BIAS + 0x40]; \ + stx %i1, [%sp + STACK_BIAS + 0x48]; \ + stx %i2, [%sp + STACK_BIAS + 0x50]; \ + stx %i3, [%sp + STACK_BIAS + 0x58]; \ + stx %i4, [%sp + STACK_BIAS + 0x60]; \ + stx %i5, [%sp + STACK_BIAS + 0x68]; \ + stx %i6, [%sp + STACK_BIAS + 0x70]; \ + stx %i7, [%sp + STACK_BIAS + 0x78]; \ + saved; retry; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; nop; nop; nop; + +#define SPILL_0_NORMAL_ETRAP \ +etrap_kernel_spill: \ + stx %l0, [%sp + STACK_BIAS + 0x00]; \ + stx %l1, [%sp + STACK_BIAS + 0x08]; \ + stx %l2, [%sp + STACK_BIAS + 0x10]; \ + stx %l3, [%sp + STACK_BIAS + 0x18]; \ + stx %l4, [%sp + STACK_BIAS + 0x20]; \ + stx %l5, [%sp + STACK_BIAS + 0x28]; \ + stx %l6, [%sp + STACK_BIAS + 0x30]; \ + stx %l7, [%sp + STACK_BIAS + 0x38]; \ + stx %i0, [%sp + STACK_BIAS + 0x40]; \ + stx %i1, [%sp + STACK_BIAS + 0x48]; \ + stx %i2, [%sp + STACK_BIAS + 0x50]; \ + stx %i3, [%sp + STACK_BIAS + 0x58]; \ + stx %i4, [%sp + STACK_BIAS + 0x60]; \ + stx %i5, [%sp + STACK_BIAS + 0x68]; \ + stx %i6, [%sp + STACK_BIAS + 0x70]; \ + stx %i7, [%sp + STACK_BIAS + 0x78]; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + +/* Normal 64bit spill */ +#define SPILL_1_GENERIC(ASI) \ + add %sp, STACK_BIAS + 0x00, %g1; \ + stxa %l0, [%g1 + %g0] ASI; \ + mov 0x08, %g3; \ + stxa %l1, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l2, [%g1 + %g0] ASI; \ + stxa %l3, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l4, [%g1 + %g0] ASI; \ + stxa %l5, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l6, [%g1 + %g0] ASI; \ + stxa %l7, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i0, [%g1 + %g0] ASI; \ + stxa %i1, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i2, [%g1 + %g0] ASI; \ + stxa %i3, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i4, [%g1 + %g0] ASI; \ + stxa %i5, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i6, [%g1 + %g0] ASI; \ + stxa %i7, [%g1 + %g3] ASI; \ + saved; \ + retry; nop; nop; \ + b,a,pt %xcc, spill_fixup_dax; \ + b,a,pt %xcc, spill_fixup_mna; \ + b,a,pt %xcc, spill_fixup; + +#define SPILL_1_GENERIC_ETRAP \ +etrap_user_spill_64bit: \ + stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \ + stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \ + stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \ + stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \ + stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \ + stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \ + stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \ + stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \ + stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \ + stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \ + stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \ + stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \ + stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \ + stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \ + stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \ + stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; + +#define SPILL_1_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_64bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \ + stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \ + stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \ + stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \ + stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \ + stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \ + stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \ + stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \ + stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \ + stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \ + stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \ + stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \ + stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \ + stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \ + stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + +/* Normal 32bit spill */ +#define SPILL_2_GENERIC(ASI) \ + srl %sp, 0, %sp; \ + stwa %l0, [%sp + %g0] ASI; \ + mov 0x04, %g3; \ + stwa %l1, [%sp + %g3] ASI; \ + add %sp, 0x08, %g1; \ + stwa %l2, [%g1 + %g0] ASI; \ + stwa %l3, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %l4, [%g1 + %g0] ASI; \ + stwa %l5, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %l6, [%g1 + %g0] ASI; \ + stwa %l7, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i0, [%g1 + %g0] ASI; \ + stwa %i1, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i2, [%g1 + %g0] ASI; \ + stwa %i3, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i4, [%g1 + %g0] ASI; \ + stwa %i5, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i6, [%g1 + %g0] ASI; \ + stwa %i7, [%g1 + %g3] ASI; \ + saved; \ + retry; nop; nop; \ + b,a,pt %xcc, spill_fixup_dax; \ + b,a,pt %xcc, spill_fixup_mna; \ + b,a,pt %xcc, spill_fixup; + +#define SPILL_2_GENERIC_ETRAP \ +etrap_user_spill_32bit: \ + srl %sp, 0, %sp; \ + stwa %l0, [%sp + 0x00] %asi; \ + stwa %l1, [%sp + 0x04] %asi; \ + stwa %l2, [%sp + 0x08] %asi; \ + stwa %l3, [%sp + 0x0c] %asi; \ + stwa %l4, [%sp + 0x10] %asi; \ + stwa %l5, [%sp + 0x14] %asi; \ + stwa %l6, [%sp + 0x18] %asi; \ + stwa %l7, [%sp + 0x1c] %asi; \ + stwa %i0, [%sp + 0x20] %asi; \ + stwa %i1, [%sp + 0x24] %asi; \ + stwa %i2, [%sp + 0x28] %asi; \ + stwa %i3, [%sp + 0x2c] %asi; \ + stwa %i4, [%sp + 0x30] %asi; \ + stwa %i5, [%sp + 0x34] %asi; \ + stwa %i6, [%sp + 0x38] %asi; \ + stwa %i7, [%sp + 0x3c] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; + +#define SPILL_2_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_32bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \ + stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \ + stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \ + stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \ + stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \ + stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \ + stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \ + stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \ + stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \ + stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \ + stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \ + stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \ + stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \ + stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \ + stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + +#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP) +#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP) +#define SPILL_3_NORMAL SPILL_0_NORMAL +#define SPILL_4_NORMAL SPILL_0_NORMAL +#define SPILL_5_NORMAL SPILL_0_NORMAL +#define SPILL_6_NORMAL SPILL_0_NORMAL +#define SPILL_7_NORMAL SPILL_0_NORMAL + +#define SPILL_0_OTHER SPILL_0_NORMAL +#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS) +#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS) +#define SPILL_3_OTHER SPILL_3_NORMAL +#define SPILL_4_OTHER SPILL_4_NORMAL +#define SPILL_5_OTHER SPILL_5_NORMAL +#define SPILL_6_OTHER SPILL_6_NORMAL +#define SPILL_7_OTHER SPILL_7_NORMAL + +/* Normal kernel fill */ +#define FILL_0_NORMAL \ + ldx [%sp + STACK_BIAS + 0x00], %l0; \ + ldx [%sp + STACK_BIAS + 0x08], %l1; \ + ldx [%sp + STACK_BIAS + 0x10], %l2; \ + ldx [%sp + STACK_BIAS + 0x18], %l3; \ + ldx [%sp + STACK_BIAS + 0x20], %l4; \ + ldx [%sp + STACK_BIAS + 0x28], %l5; \ + ldx [%sp + STACK_BIAS + 0x30], %l6; \ + ldx [%sp + STACK_BIAS + 0x38], %l7; \ + ldx [%sp + STACK_BIAS + 0x40], %i0; \ + ldx [%sp + STACK_BIAS + 0x48], %i1; \ + ldx [%sp + STACK_BIAS + 0x50], %i2; \ + ldx [%sp + STACK_BIAS + 0x58], %i3; \ + ldx [%sp + STACK_BIAS + 0x60], %i4; \ + ldx [%sp + STACK_BIAS + 0x68], %i5; \ + ldx [%sp + STACK_BIAS + 0x70], %i6; \ + ldx [%sp + STACK_BIAS + 0x78], %i7; \ + restored; retry; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; nop; nop; nop; + +#define FILL_0_NORMAL_RTRAP \ +kern_rtt_fill: \ + rdpr %cwp, %g1; \ + sub %g1, 1, %g1; \ + wrpr %g1, %cwp; \ + ldx [%sp + STACK_BIAS + 0x00], %l0; \ + ldx [%sp + STACK_BIAS + 0x08], %l1; \ + ldx [%sp + STACK_BIAS + 0x10], %l2; \ + ldx [%sp + STACK_BIAS + 0x18], %l3; \ + ldx [%sp + STACK_BIAS + 0x20], %l4; \ + ldx [%sp + STACK_BIAS + 0x28], %l5; \ + ldx [%sp + STACK_BIAS + 0x30], %l6; \ + ldx [%sp + STACK_BIAS + 0x38], %l7; \ + ldx [%sp + STACK_BIAS + 0x40], %i0; \ + ldx [%sp + STACK_BIAS + 0x48], %i1; \ + ldx [%sp + STACK_BIAS + 0x50], %i2; \ + ldx [%sp + STACK_BIAS + 0x58], %i3; \ + ldx [%sp + STACK_BIAS + 0x60], %i4; \ + ldx [%sp + STACK_BIAS + 0x68], %i5; \ + ldx [%sp + STACK_BIAS + 0x70], %i6; \ + ldx [%sp + STACK_BIAS + 0x78], %i7; \ + restored; \ + add %g1, 1, %g1; \ + ba,pt %xcc, kern_rtt_restore; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + + +/* Normal 64bit fill */ +#define FILL_1_GENERIC(ASI) \ + add %sp, STACK_BIAS + 0x00, %g1; \ + ldxa [%g1 + %g0] ASI, %l0; \ + mov 0x08, %g2; \ + mov 0x10, %g3; \ + ldxa [%g1 + %g2] ASI, %l1; \ + mov 0x18, %g5; \ + ldxa [%g1 + %g3] ASI, %l2; \ + ldxa [%g1 + %g5] ASI, %l3; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %l4; \ + ldxa [%g1 + %g2] ASI, %l5; \ + ldxa [%g1 + %g3] ASI, %l6; \ + ldxa [%g1 + %g5] ASI, %l7; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %i0; \ + ldxa [%g1 + %g2] ASI, %i1; \ + ldxa [%g1 + %g3] ASI, %i2; \ + ldxa [%g1 + %g5] ASI, %i3; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %i4; \ + ldxa [%g1 + %g2] ASI, %i5; \ + ldxa [%g1 + %g3] ASI, %i6; \ + ldxa [%g1 + %g5] ASI, %i7; \ + restored; \ + retry; nop; nop; nop; nop; \ + b,a,pt %xcc, fill_fixup_dax; \ + b,a,pt %xcc, fill_fixup_mna; \ + b,a,pt %xcc, fill_fixup; + +#define FILL_1_GENERIC_RTRAP \ +user_rtt_fill_64bit: \ + ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \ + ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \ + ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \ + ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \ + ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \ + ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \ + ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \ + ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \ + ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \ + ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \ + ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \ + ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \ + ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \ + ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \ + ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \ + ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + +/* Normal 32bit fill */ +#define FILL_2_GENERIC(ASI) \ + srl %sp, 0, %sp; \ + lduwa [%sp + %g0] ASI, %l0; \ + mov 0x04, %g2; \ + mov 0x08, %g3; \ + lduwa [%sp + %g2] ASI, %l1; \ + mov 0x0c, %g5; \ + lduwa [%sp + %g3] ASI, %l2; \ + lduwa [%sp + %g5] ASI, %l3; \ + add %sp, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %l4; \ + lduwa [%g1 + %g2] ASI, %l5; \ + lduwa [%g1 + %g3] ASI, %l6; \ + lduwa [%g1 + %g5] ASI, %l7; \ + add %g1, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %i0; \ + lduwa [%g1 + %g2] ASI, %i1; \ + lduwa [%g1 + %g3] ASI, %i2; \ + lduwa [%g1 + %g5] ASI, %i3; \ + add %g1, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %i4; \ + lduwa [%g1 + %g2] ASI, %i5; \ + lduwa [%g1 + %g3] ASI, %i6; \ + lduwa [%g1 + %g5] ASI, %i7; \ + restored; \ + retry; nop; nop; nop; nop; \ + b,a,pt %xcc, fill_fixup_dax; \ + b,a,pt %xcc, fill_fixup_mna; \ + b,a,pt %xcc, fill_fixup; + +#define FILL_2_GENERIC_RTRAP \ +user_rtt_fill_32bit: \ + srl %sp, 0, %sp; \ + lduwa [%sp + 0x00] %asi, %l0; \ + lduwa [%sp + 0x04] %asi, %l1; \ + lduwa [%sp + 0x08] %asi, %l2; \ + lduwa [%sp + 0x0c] %asi, %l3; \ + lduwa [%sp + 0x10] %asi, %l4; \ + lduwa [%sp + 0x14] %asi, %l5; \ + lduwa [%sp + 0x18] %asi, %l6; \ + lduwa [%sp + 0x1c] %asi, %l7; \ + lduwa [%sp + 0x20] %asi, %i0; \ + lduwa [%sp + 0x24] %asi, %i1; \ + lduwa [%sp + 0x28] %asi, %i2; \ + lduwa [%sp + 0x2c] %asi, %i3; \ + lduwa [%sp + 0x30] %asi, %i4; \ + lduwa [%sp + 0x34] %asi, %i5; \ + lduwa [%sp + 0x38] %asi, %i6; \ + lduwa [%sp + 0x3c] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + +#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP) +#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP) +#define FILL_3_NORMAL FILL_0_NORMAL +#define FILL_4_NORMAL FILL_0_NORMAL +#define FILL_5_NORMAL FILL_0_NORMAL +#define FILL_6_NORMAL FILL_0_NORMAL +#define FILL_7_NORMAL FILL_0_NORMAL + +#define FILL_0_OTHER FILL_0_NORMAL +#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS) +#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS) +#define FILL_3_OTHER FILL_3_NORMAL +#define FILL_4_OTHER FILL_4_NORMAL +#define FILL_5_OTHER FILL_5_NORMAL +#define FILL_6_OTHER FILL_6_NORMAL +#define FILL_7_OTHER FILL_7_NORMAL + +#endif /* !(_SPARC64_TTABLE_H) */ diff --git a/include/asm-sparc/upa.h b/include/asm-sparc/upa.h new file mode 100644 index 00000000000..5b1633223f9 --- /dev/null +++ b/include/asm-sparc/upa.h @@ -0,0 +1,109 @@ +#ifndef _SPARC64_UPA_H +#define _SPARC64_UPA_H + +#include <asm/asi.h> + +/* UPA level registers and defines. */ + +/* UPA Config Register */ +#define UPA_CONFIG_RESV 0xffffffffc0000000 /* Reserved. */ +#define UPA_CONFIG_PCON 0x000000003fc00000 /* Depth of various sys queues. */ +#define UPA_CONFIG_MID 0x00000000003e0000 /* Module ID. */ +#define UPA_CONFIG_PCAP 0x000000000001ffff /* Port Capabilities. */ + +/* UPA Port ID Register */ +#define UPA_PORTID_FNP 0xff00000000000000 /* Hardcoded to 0xfc on ultra. */ +#define UPA_PORTID_RESV 0x00fffff800000000 /* Reserved. */ +#define UPA_PORTID_ECCVALID 0x0000000400000000 /* Zero if mod can generate ECC */ +#define UPA_PORTID_ONEREAD 0x0000000200000000 /* Set if mod generates P_RASB */ +#define UPA_PORTID_PINTRDQ 0x0000000180000000 /* # outstanding P_INT_REQ's */ +#define UPA_PORTID_PREQDQ 0x000000007e000000 /* slave-wr's to mod supported */ +#define UPA_PORTID_PREQRD 0x0000000001e00000 /* # incoming P_REQ's supported */ +#define UPA_PORTID_UPACAP 0x00000000001f0000 /* UPA capabilities of mod */ +#define UPA_PORTID_ID 0x000000000000ffff /* Module Identification bits */ + +/* UPA I/O space accessors */ +#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +static inline unsigned char _upa_readb(unsigned long addr) +{ + unsigned char ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned short _upa_readw(unsigned long addr) +{ + unsigned short ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned int _upa_readl(unsigned long addr) +{ + unsigned int ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned long _upa_readq(unsigned long addr) +{ + unsigned long ret; + + __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline void _upa_writeb(unsigned char b, unsigned long addr) +{ + __asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */" + : /* no outputs */ + : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writew(unsigned short w, unsigned long addr) +{ + __asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */" + : /* no outputs */ + : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writel(unsigned int l, unsigned long addr) +{ + __asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */" + : /* no outputs */ + : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writeq(unsigned long q, unsigned long addr) +{ + __asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */" + : /* no outputs */ + : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +#define upa_readb(__addr) (_upa_readb((unsigned long)(__addr))) +#define upa_readw(__addr) (_upa_readw((unsigned long)(__addr))) +#define upa_readl(__addr) (_upa_readl((unsigned long)(__addr))) +#define upa_readq(__addr) (_upa_readq((unsigned long)(__addr))) +#define upa_writeb(__b, __addr) (_upa_writeb((__b), (unsigned long)(__addr))) +#define upa_writew(__w, __addr) (_upa_writew((__w), (unsigned long)(__addr))) +#define upa_writel(__l, __addr) (_upa_writel((__l), (unsigned long)(__addr))) +#define upa_writeq(__q, __addr) (_upa_writeq((__q), (unsigned long)(__addr))) +#endif /* __KERNEL__ && !__ASSEMBLY__ */ + +#endif /* !(_SPARC64_UPA_H) */ diff --git a/include/asm-sparc/vio.h b/include/asm-sparc/vio.h new file mode 100644 index 00000000000..d4de32f0f8a --- /dev/null +++ b/include/asm-sparc/vio.h @@ -0,0 +1,406 @@ +#ifndef _SPARC64_VIO_H +#define _SPARC64_VIO_H + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/list.h> +#include <linux/log2.h> + +#include <asm/ldc.h> +#include <asm/mdesc.h> + +struct vio_msg_tag { + u8 type; +#define VIO_TYPE_CTRL 0x01 +#define VIO_TYPE_DATA 0x02 +#define VIO_TYPE_ERR 0x04 + + u8 stype; +#define VIO_SUBTYPE_INFO 0x01 +#define VIO_SUBTYPE_ACK 0x02 +#define VIO_SUBTYPE_NACK 0x04 + + u16 stype_env; +#define VIO_VER_INFO 0x0001 +#define VIO_ATTR_INFO 0x0002 +#define VIO_DRING_REG 0x0003 +#define VIO_DRING_UNREG 0x0004 +#define VIO_RDX 0x0005 +#define VIO_PKT_DATA 0x0040 +#define VIO_DESC_DATA 0x0041 +#define VIO_DRING_DATA 0x0042 +#define VNET_MCAST_INFO 0x0101 + + u32 sid; +}; + +struct vio_rdx { + struct vio_msg_tag tag; + u64 resv[6]; +}; + +struct vio_ver_info { + struct vio_msg_tag tag; + u16 major; + u16 minor; + u8 dev_class; +#define VDEV_NETWORK 0x01 +#define VDEV_NETWORK_SWITCH 0x02 +#define VDEV_DISK 0x03 +#define VDEV_DISK_SERVER 0x04 + + u8 resv1[3]; + u64 resv2[5]; +}; + +struct vio_dring_register { + struct vio_msg_tag tag; + u64 dring_ident; + u32 num_descr; + u32 descr_size; + u16 options; +#define VIO_TX_DRING 0x0001 +#define VIO_RX_DRING 0x0002 + u16 resv; + u32 num_cookies; + struct ldc_trans_cookie cookies[0]; +}; + +struct vio_dring_unregister { + struct vio_msg_tag tag; + u64 dring_ident; + u64 resv[5]; +}; + +/* Data transfer modes */ +#define VIO_PKT_MODE 0x01 /* Packet based transfer */ +#define VIO_DESC_MODE 0x02 /* In-band descriptors */ +#define VIO_DRING_MODE 0x03 /* Descriptor rings */ + +struct vio_dring_data { + struct vio_msg_tag tag; + u64 seq; + u64 dring_ident; + u32 start_idx; + u32 end_idx; + u8 state; +#define VIO_DRING_ACTIVE 0x01 +#define VIO_DRING_STOPPED 0x02 + + u8 __pad1; + u16 __pad2; + u32 __pad3; + u64 __par4[2]; +}; + +struct vio_dring_hdr { + u8 state; +#define VIO_DESC_FREE 0x01 +#define VIO_DESC_READY 0x02 +#define VIO_DESC_ACCEPTED 0x03 +#define VIO_DESC_DONE 0x04 + u8 ack; +#define VIO_ACK_ENABLE 0x01 +#define VIO_ACK_DISABLE 0x00 + + u16 __pad1; + u32 __pad2; +}; + +/* VIO disk specific structures and defines */ +struct vio_disk_attr_info { + struct vio_msg_tag tag; + u8 xfer_mode; + u8 vdisk_type; +#define VD_DISK_TYPE_SLICE 0x01 /* Slice in block device */ +#define VD_DISK_TYPE_DISK 0x02 /* Entire block device */ + u16 resv1; + u32 vdisk_block_size; + u64 operations; + u64 vdisk_size; + u64 max_xfer_size; + u64 resv2[2]; +}; + +struct vio_disk_desc { + struct vio_dring_hdr hdr; + u64 req_id; + u8 operation; +#define VD_OP_BREAD 0x01 /* Block read */ +#define VD_OP_BWRITE 0x02 /* Block write */ +#define VD_OP_FLUSH 0x03 /* Flush disk contents */ +#define VD_OP_GET_WCE 0x04 /* Get write-cache status */ +#define VD_OP_SET_WCE 0x05 /* Enable/disable write-cache */ +#define VD_OP_GET_VTOC 0x06 /* Get VTOC */ +#define VD_OP_SET_VTOC 0x07 /* Set VTOC */ +#define VD_OP_GET_DISKGEOM 0x08 /* Get disk geometry */ +#define VD_OP_SET_DISKGEOM 0x09 /* Set disk geometry */ +#define VD_OP_SCSICMD 0x0a /* SCSI control command */ +#define VD_OP_GET_DEVID 0x0b /* Get device ID */ +#define VD_OP_GET_EFI 0x0c /* Get EFI */ +#define VD_OP_SET_EFI 0x0d /* Set EFI */ + u8 slice; + u16 resv1; + u32 status; + u64 offset; + u64 size; + u32 ncookies; + u32 resv2; + struct ldc_trans_cookie cookies[0]; +}; + +#define VIO_DISK_VNAME_LEN 8 +#define VIO_DISK_ALABEL_LEN 128 +#define VIO_DISK_NUM_PART 8 + +struct vio_disk_vtoc { + u8 volume_name[VIO_DISK_VNAME_LEN]; + u16 sector_size; + u16 num_partitions; + u8 ascii_label[VIO_DISK_ALABEL_LEN]; + struct { + u16 id; + u16 perm_flags; + u32 resv; + u64 start_block; + u64 num_blocks; + } partitions[VIO_DISK_NUM_PART]; +}; + +struct vio_disk_geom { + u16 num_cyl; /* Num data cylinders */ + u16 alt_cyl; /* Num alternate cylinders */ + u16 beg_cyl; /* Cyl off of fixed head area */ + u16 num_hd; /* Num heads */ + u16 num_sec; /* Num sectors */ + u16 ifact; /* Interleave factor */ + u16 apc; /* Alts per cylinder (SCSI) */ + u16 rpm; /* Revolutions per minute */ + u16 phy_cyl; /* Num physical cylinders */ + u16 wr_skip; /* Num sects to skip, writes */ + u16 rd_skip; /* Num sects to skip, writes */ +}; + +struct vio_disk_devid { + u16 resv; + u16 type; + u32 len; + char id[0]; +}; + +struct vio_disk_efi { + u64 lba; + u64 len; + char data[0]; +}; + +/* VIO net specific structures and defines */ +struct vio_net_attr_info { + struct vio_msg_tag tag; + u8 xfer_mode; + u8 addr_type; +#define VNET_ADDR_ETHERMAC 0x01 + u16 ack_freq; + u32 resv1; + u64 addr; + u64 mtu; + u64 resv2[3]; +}; + +#define VNET_NUM_MCAST 7 + +struct vio_net_mcast_info { + struct vio_msg_tag tag; + u8 set; + u8 count; + u8 mcast_addr[VNET_NUM_MCAST * 6]; + u32 resv; +}; + +struct vio_net_desc { + struct vio_dring_hdr hdr; + u32 size; + u32 ncookies; + struct ldc_trans_cookie cookies[0]; +}; + +#define VIO_MAX_RING_COOKIES 24 + +struct vio_dring_state { + u64 ident; + void *base; + u64 snd_nxt; + u64 rcv_nxt; + u32 entry_size; + u32 num_entries; + u32 prod; + u32 cons; + u32 pending; + int ncookies; + struct ldc_trans_cookie cookies[VIO_MAX_RING_COOKIES]; +}; + +static inline void *vio_dring_cur(struct vio_dring_state *dr) +{ + return dr->base + (dr->entry_size * dr->prod); +} + +static inline void *vio_dring_entry(struct vio_dring_state *dr, + unsigned int index) +{ + return dr->base + (dr->entry_size * index); +} + +static inline u32 vio_dring_avail(struct vio_dring_state *dr, + unsigned int ring_size) +{ + BUILD_BUG_ON(!is_power_of_2(ring_size)); + + return (dr->pending - + ((dr->prod - dr->cons) & (ring_size - 1))); +} + +#define VIO_MAX_TYPE_LEN 32 +#define VIO_MAX_COMPAT_LEN 64 + +struct vio_dev { + u64 mp; + struct device_node *dp; + + char type[VIO_MAX_TYPE_LEN]; + char compat[VIO_MAX_COMPAT_LEN]; + int compat_len; + + u64 dev_no; + + unsigned long channel_id; + + unsigned int tx_irq; + unsigned int rx_irq; + + struct device dev; +}; + +struct vio_driver { + struct list_head node; + const struct vio_device_id *id_table; + int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); + int (*remove)(struct vio_dev *dev); + void (*shutdown)(struct vio_dev *dev); + unsigned long driver_data; + struct device_driver driver; +}; + +struct vio_version { + u16 major; + u16 minor; +}; + +struct vio_driver_state; +struct vio_driver_ops { + int (*send_attr)(struct vio_driver_state *vio); + int (*handle_attr)(struct vio_driver_state *vio, void *pkt); + void (*handshake_complete)(struct vio_driver_state *vio); +}; + +struct vio_completion { + struct completion com; + int err; + int waiting_for; +}; + +struct vio_driver_state { + /* Protects VIO handshake and, optionally, driver private state. */ + spinlock_t lock; + + struct ldc_channel *lp; + + u32 _peer_sid; + u32 _local_sid; + struct vio_dring_state drings[2]; +#define VIO_DRIVER_TX_RING 0 +#define VIO_DRIVER_RX_RING 1 + + u8 hs_state; +#define VIO_HS_INVALID 0x00 +#define VIO_HS_GOTVERS 0x01 +#define VIO_HS_GOT_ATTR 0x04 +#define VIO_HS_SENT_DREG 0x08 +#define VIO_HS_SENT_RDX 0x10 +#define VIO_HS_GOT_RDX_ACK 0x20 +#define VIO_HS_GOT_RDX 0x40 +#define VIO_HS_SENT_RDX_ACK 0x80 +#define VIO_HS_COMPLETE (VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK) + + u8 dev_class; + + u8 dr_state; +#define VIO_DR_STATE_TXREG 0x01 +#define VIO_DR_STATE_RXREG 0x02 +#define VIO_DR_STATE_TXREQ 0x10 +#define VIO_DR_STATE_RXREQ 0x20 + + u8 debug; +#define VIO_DEBUG_HS 0x01 +#define VIO_DEBUG_DATA 0x02 + + void *desc_buf; + unsigned int desc_buf_len; + + struct vio_completion *cmp; + + struct vio_dev *vdev; + + struct timer_list timer; + + struct vio_version ver; + + struct vio_version *ver_table; + int ver_table_entries; + + char *name; + + struct vio_driver_ops *ops; +}; + +#define viodbg(TYPE, f, a...) \ +do { if (vio->debug & VIO_DEBUG_##TYPE) \ + printk(KERN_INFO "vio: ID[%lu] " f, \ + vio->vdev->channel_id, ## a); \ +} while (0) + +extern int vio_register_driver(struct vio_driver *drv); +extern void vio_unregister_driver(struct vio_driver *drv); + +static inline struct vio_driver *to_vio_driver(struct device_driver *drv) +{ + return container_of(drv, struct vio_driver, driver); +} + +static inline struct vio_dev *to_vio_dev(struct device *dev) +{ + return container_of(dev, struct vio_dev, dev); +} + +extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len); +extern void vio_link_state_change(struct vio_driver_state *vio, int event); +extern void vio_conn_reset(struct vio_driver_state *vio); +extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt); +extern int vio_validate_sid(struct vio_driver_state *vio, + struct vio_msg_tag *tp); +extern u32 vio_send_sid(struct vio_driver_state *vio); +extern int vio_ldc_alloc(struct vio_driver_state *vio, + struct ldc_channel_config *base_cfg, void *event_arg); +extern void vio_ldc_free(struct vio_driver_state *vio); +extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev, + u8 dev_class, struct vio_version *ver_table, + int ver_table_size, struct vio_driver_ops *ops, + char *name); + +extern void vio_port_up(struct vio_driver_state *vio); + +#endif /* _SPARC64_VIO_H */ diff --git a/include/asm-sparc/visasm.h b/include/asm-sparc/visasm.h new file mode 100644 index 00000000000..de797b9bf55 --- /dev/null +++ b/include/asm-sparc/visasm.h @@ -0,0 +1,62 @@ +#ifndef _SPARC64_VISASM_H +#define _SPARC64_VISASM_H + +/* visasm.h: FPU saving macros for VIS routines + * + * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz) + */ + +#include <asm/pstate.h> +#include <asm/ptrace.h> + +/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */ + +#define VISEntry \ + rd %fprs, %o5; \ + andcc %o5, (FPRS_FEF|FPRS_DU), %g0; \ + be,pt %icc, 297f; \ + sethi %hi(297f), %g7; \ + sethi %hi(VISenter), %g1; \ + jmpl %g1 + %lo(VISenter), %g0; \ + or %g7, %lo(297f), %g7; \ +297: wr %g0, FPRS_FEF, %fprs; \ + +#define VISExit \ + wr %g0, 0, %fprs; + +/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc. + * Must preserve %o5 between VISEntryHalf and VISExitHalf */ + +#define VISEntryHalf \ + rd %fprs, %o5; \ + andcc %o5, FPRS_FEF, %g0; \ + be,pt %icc, 297f; \ + sethi %hi(298f), %g7; \ + sethi %hi(VISenterhalf), %g1; \ + jmpl %g1 + %lo(VISenterhalf), %g0; \ + or %g7, %lo(298f), %g7; \ + clr %o5; \ +297: wr %o5, FPRS_FEF, %fprs; \ +298: + +#define VISExitHalf \ + wr %o5, 0, %fprs; + +#ifndef __ASSEMBLY__ +static inline void save_and_clear_fpu(void) { + __asm__ __volatile__ ( +" rd %%fprs, %%o5\n" +" andcc %%o5, %0, %%g0\n" +" be,pt %%icc, 299f\n" +" sethi %%hi(298f), %%g7\n" +" sethi %%hi(VISenter), %%g1\n" +" jmpl %%g1 + %%lo(VISenter), %%g0\n" +" or %%g7, %%lo(298f), %%g7\n" +" 298: wr %%g0, 0, %%fprs\n" +" 299:\n" +" " : : "i" (FPRS_FEF|FPRS_DU) : + "o5", "g1", "g2", "g3", "g7", "cc"); +} +#endif + +#endif /* _SPARC64_ASI_H */ diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h index e9fcf0e781e..eb8d4b3f516 100644 --- a/include/asm-sparc64/agp.h +++ b/include/asm-sparc64/agp.h @@ -1,20 +1 @@ -#ifndef AGP_H -#define AGP_H 1 - -/* dummy for now */ - -#define map_page_into_agp(page) -#define unmap_page_from_agp(page) -#define flush_agp_cache() mb() - -/* Convert a physical address to an address suitable for the GART. */ -#define phys_to_gart(x) (x) -#define gart_to_phys(x) (x) - -/* GATT allocation. Returns/accepts GATT kernel virtual address. */ -#define alloc_gatt_pages(order) \ - ((char *)__get_free_pages(GFP_KERNEL, (order))) -#define free_gatt_pages(table, order) \ - free_pages((unsigned long)(table), (order)) - -#endif +#include <asm-sparc/agp.h> diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h index 8f3b57db810..5e236ca6e49 100644 --- a/include/asm-sparc64/apb.h +++ b/include/asm-sparc64/apb.h @@ -1,36 +1 @@ -/* - * apb.h: Advanced PCI Bridge Configuration Registers and Bits - * - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SPARC64_APB_H -#define _SPARC64_APB_H - -#define APB_TICK_REGISTER 0xb0 -#define APB_INT_ACK 0xb8 -#define APB_PRIMARY_MASTER_RETRY_LIMIT 0xc0 -#define APB_DMA_ASFR 0xc8 -#define APB_DMA_AFAR 0xd0 -#define APB_PIO_TARGET_RETRY_LIMIT 0xd8 -#define APB_PIO_TARGET_LATENCY_TIMER 0xd9 -#define APB_DMA_TARGET_RETRY_LIMIT 0xda -#define APB_DMA_TARGET_LATENCY_TIMER 0xdb -#define APB_SECONDARY_MASTER_RETRY_LIMIT 0xdc -#define APB_SECONDARY_CONTROL 0xdd -#define APB_IO_ADDRESS_MAP 0xde -#define APB_MEM_ADDRESS_MAP 0xdf - -#define APB_PCI_CONTROL_LOW 0xe0 -# define APB_PCI_CTL_LOW_ARB_PARK (1 << 21) -# define APB_PCI_CTL_LOW_ERRINT_EN (1 << 8) - -#define APB_PCI_CONTROL_HIGH 0xe4 -# define APB_PCI_CTL_HIGH_SERR (1 << 2) -# define APB_PCI_CTL_HIGH_ARBITER_EN (1 << 0) - -#define APB_PIO_ASFR 0xe8 -#define APB_PIO_AFAR 0xf0 -#define APB_DIAG_REGISTER 0xf8 - -#endif /* !(_SPARC64_APB_H) */ +#include <asm-sparc/apb.h> diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h index fa1fdf67e35..8ee26d947e0 100644 --- a/include/asm-sparc64/backoff.h +++ b/include/asm-sparc64/backoff.h @@ -1,31 +1 @@ -#ifndef _SPARC64_BACKOFF_H -#define _SPARC64_BACKOFF_H - -#define BACKOFF_LIMIT (4 * 1024) - -#ifdef CONFIG_SMP - -#define BACKOFF_SETUP(reg) \ - mov 1, reg - -#define BACKOFF_SPIN(reg, tmp, label) \ - mov reg, tmp; \ -88: brnz,pt tmp, 88b; \ - sub tmp, 1, tmp; \ - set BACKOFF_LIMIT, tmp; \ - cmp reg, tmp; \ - bg,pn %xcc, label; \ - nop; \ - ba,pt %xcc, label; \ - sllx reg, 1, reg; - -#else - -#define BACKOFF_SETUP(reg) -#define BACKOFF_SPIN(reg, tmp, label) \ - ba,pt %xcc, label; \ - nop; - -#endif - -#endif /* _SPARC64_BACKOFF_H */ +#include <asm-sparc/backoff.h> diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h index 423a85800aa..06e8b630651 100644 --- a/include/asm-sparc64/bbc.h +++ b/include/asm-sparc64/bbc.h @@ -1,225 +1 @@ -/* - * bbc.h: Defines for BootBus Controller found on UltraSPARC-III - * systems. - * - * Copyright (C) 2000 David S. Miller (davem@redhat.com) - */ - -#ifndef _SPARC64_BBC_H -#define _SPARC64_BBC_H - -/* Register sizes are indicated by "B" (Byte, 1-byte), - * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or - * "Q" (Quad, 8 bytes) inside brackets. - */ - -#define BBC_AID 0x00 /* [B] Agent ID */ -#define BBC_DEVP 0x01 /* [B] Device Present */ -#define BBC_ARB 0x02 /* [B] Arbitration */ -#define BBC_QUIESCE 0x03 /* [B] Quiesce */ -#define BBC_WDACTION 0x04 /* [B] Watchdog Action */ -#define BBC_SPG 0x06 /* [B] Soft POR Gen */ -#define BBC_SXG 0x07 /* [B] Soft XIR Gen */ -#define BBC_PSRC 0x08 /* [W] POR Source */ -#define BBC_XSRC 0x0c /* [B] XIR Source */ -#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ -#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ -#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ -#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ -#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ -#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ -#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ -#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ -#define BBC_EBUST 0x20 /* [Q] EBUS Timing */ -#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ -#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ -#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ -#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ -#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ -#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ -#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ -#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ -#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ - -#define BBC_REGS_SIZE 0x40 - -/* There is a 2K scratch ram area at offset 0x80000 but I doubt - * we will use it for anything. - */ - -/* Agent ID register. This register shows the Safari Agent ID - * for the processors. The value returned depends upon which - * cpu is reading the register. - */ -#define BBC_AID_ID 0x07 /* Safari ID */ -#define BBC_AID_RESV 0xf8 /* Reserved */ - -/* Device Present register. One can determine which cpus are actually - * present in the machine by interrogating this register. - */ -#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ -#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ -#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ -#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ -#define BBC_DEVP_RESV 0xf0 /* Reserved */ - -/* Arbitration register. This register is used to block access to - * the BBC from a particular cpu. - */ -#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ -#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ -#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ -#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ -#define BBC_ARB_RESV 0xf0 /* Reserved */ - -/* Quiesce register. Bus and BBC segments for cpus can be disabled - * with this register, ie. for hot plugging. - */ -#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ -#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ -#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ -#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ -#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ -#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ -#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ -#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ - -/* Watchdog Action register. When the watchdog device timer expires - * a line is enabled to the BBC. The action BBC takes when this line - * is asserted can be controlled by this regiser. - */ -#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. - * When clear, BBC ignores watchdog signal. - */ -#define BBC_WDACTION_RESV 0xfe /* Reserved */ - -/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted - * for specific processors or all processors via this register. - */ -#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ -#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ -#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ -#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ -#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset - * the entire system. - */ -#define BBC_SPG_RESV 0xe0 /* Reserved */ - -/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal - * may be asserted to specific processors via this register. - */ -#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ -#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ -#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ -#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ -#define BBC_SXG_RESV 0xf0 /* Reserved */ - -/* POR Source register. One may identify the cause of the most recent - * reset by reading this register. - */ -#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ -#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ -#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ -#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ -#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ -#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ -#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ -#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ -#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ -#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ -#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ -#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ -#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ -#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ -#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ -#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers - * were updated. - */ -#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ -#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring - * device - */ - -/* XIR Source register. The source of an XIR event sent to a processor may - * be determined via this register. - */ -#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ -#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ -#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ -#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ -#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ -#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: - * a) Super I/O watchdog fired, or - * b) XIR push button was activated - */ -#define BBC_XSRC_RESV 0xc0 /* Reserved */ - -/* Clock Synthesizers Control register. This register provides the big-bang - * programming interface to the two clock synthesizers of the machine. - */ -#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ -#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ -#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ -#define BBC_CSC_RESV 0x78 /* Reserved */ -#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ - -/* Energy Star Control register. This register is used to generate the - * clock frequency change trigger to the main system devices (Schizo and - * the processors). The transition occurs when bits in this register - * go from 0 to 1, only one bit must be set at once else no action - * occurs. Basically the sequence of events is: - * a) Choose new frequency: full, 1/2 or 1/32 - * b) Program this desired frequency into the cpus and Schizo. - * c) Set the same value in this register. - * d) 16 system clocks later, clear this register. - */ -#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ -#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ -#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ -#define BBC_ES_RESV 0xdc /* Reserved */ - -/* Energy Star Assert Change Time register. This determines the number - * of BBC clock cycles (which is half the system frequency) between - * the detection of FREEZE_ACK being asserted and the assertion of - * the CLK_CHANGE_L[2:0] signals. - */ -#define BBC_ES_ACT_VAL 0xff - -/* Energy Star Assert Bypass Time register. This determines the number - * of BBC clock cycles (which is half the system frequency) between - * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of - * the ESTAR_PLL_BYPASS signal. - */ -#define BBC_ES_ABT_VAL 0xffff - -/* Energy Star PLL Settle Time register. This determines the number of - * BBC clock cycles (which is half the system frequency) between the - * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L - * signal. - */ -#define BBC_ES_PST_VAL 0xffffffff - -/* Energy Star Frequency Switch Latency register. This is the number of - * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first - * edge of the Safari clock at the new frequency. - */ -#define BBC_ES_FSL_VAL 0xffffffff - -/* Keyboard Beep control register. This is a simple enabler for the audio - * beep sound. - */ -#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ -#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ - -/* Keyboard Beep Counter register. There is a free-running counter inside - * the BBC which runs at half the system clock. The bit set in this register - * determines when the audio sound is generated. So for example if bit - * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep - * generator automatically selects a different bit to use if the system clock - * is changed via Energy Star. - */ -#define BBC_KBD_BCNT_BITS 0x0007fc00 -#define BBC_KBC_BCNT_RESV 0xfff803ff - -#endif /* _SPARC64_BBC_H */ - +#include <asm-sparc/bbc.h> diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h index 85c69b38220..aaab97562a3 100644 --- a/include/asm-sparc64/chafsr.h +++ b/include/asm-sparc64/chafsr.h @@ -1,241 +1 @@ -#ifndef _SPARC64_CHAFSR_H -#define _SPARC64_CHAFSR_H - -/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ - -/* Comments indicate which processor variants on which the bit definition - * is valid. Codes are: - * ch --> cheetah - * ch+ --> cheetah plus - * jp --> jalapeno - */ - -/* All bits of this register except M_SYNDROME and E_SYNDROME are - * read, write 1 to clear. M_SYNDROME and E_SYNDROME are read-only. - */ - -/* Software bit set by linux trap handlers to indicate that the trap was - * signalled at %tl >= 1. - */ -#define CHAFSR_TL1 (1UL << 63UL) /* n/a */ - -/* Unmapped error from system bus for prefetch queue or - * store queue read operation - */ -#define CHPAFSR_DTO (1UL << 59UL) /* ch+ */ - -/* Bus error from system bus for prefetch queue or store queue - * read operation - */ -#define CHPAFSR_DBERR (1UL << 58UL) /* ch+ */ - -/* Hardware corrected E-cache Tag ECC error */ -#define CHPAFSR_THCE (1UL << 57UL) /* ch+ */ -/* System interface protocol error, hw timeout caused */ -#define JPAFSR_JETO (1UL << 57UL) /* jp */ - -/* SW handled correctable E-cache Tag ECC error */ -#define CHPAFSR_TSCE (1UL << 56UL) /* ch+ */ -/* Parity error on system snoop results */ -#define JPAFSR_SCE (1UL << 56UL) /* jp */ - -/* Uncorrectable E-cache Tag ECC error */ -#define CHPAFSR_TUE (1UL << 55UL) /* ch+ */ -/* System interface protocol error, illegal command detected */ -#define JPAFSR_JEIC (1UL << 55UL) /* jp */ - -/* Uncorrectable system bus data ECC error due to prefetch - * or store fill request - */ -#define CHPAFSR_DUE (1UL << 54UL) /* ch+ */ -/* System interface protocol error, illegal ADTYPE detected */ -#define JPAFSR_JEIT (1UL << 54UL) /* jp */ - -/* Multiple errors of the same type have occurred. This bit is set when - * an uncorrectable error or a SW correctable error occurs and the status - * bit to report that error is already set. When multiple errors of - * different types are indicated by setting multiple status bits. - * - * This bit is not set if multiple HW corrected errors with the same - * status bit occur, only uncorrectable and SW correctable ones have - * this behavior. - * - * This bit is not set when multiple ECC errors happen within a single - * 64-byte system bus transaction. Only the first ECC error in a 16-byte - * subunit will be logged. All errors in subsequent 16-byte subunits - * from the same 64-byte transaction are ignored. - */ -#define CHAFSR_ME (1UL << 53UL) /* ch,ch+,jp */ - -/* Privileged state error has occurred. This is a capture of PSTATE.PRIV - * at the time the error is detected. - */ -#define CHAFSR_PRIV (1UL << 52UL) /* ch,ch+,jp */ - -/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error - * bits and record the most recently detected errors. Bits accumulate - * errors that have been detected since the last write to clear the bit. - */ - -/* System interface protocol error. The processor asserts its' ERROR - * pin when this event occurs and it also logs a specific cause code - * into a JTAG scannable flop. - */ -#define CHAFSR_PERR (1UL << 51UL) /* ch,ch+,jp */ - -/* Internal processor error. The processor asserts its' ERROR - * pin when this event occurs and it also logs a specific cause code - * into a JTAG scannable flop. - */ -#define CHAFSR_IERR (1UL << 50UL) /* ch,ch+,jp */ - -/* System request parity error on incoming address */ -#define CHAFSR_ISAP (1UL << 49UL) /* ch,ch+,jp */ - -/* HW Corrected system bus MTAG ECC error */ -#define CHAFSR_EMC (1UL << 48UL) /* ch,ch+ */ -/* Parity error on L2 cache tag SRAM */ -#define JPAFSR_ETP (1UL << 48UL) /* jp */ - -/* Uncorrectable system bus MTAG ECC error */ -#define CHAFSR_EMU (1UL << 47UL) /* ch,ch+ */ -/* Out of range memory error has occurred */ -#define JPAFSR_OM (1UL << 47UL) /* jp */ - -/* HW Corrected system bus data ECC error for read of interrupt vector */ -#define CHAFSR_IVC (1UL << 46UL) /* ch,ch+ */ -/* Error due to unsupported store */ -#define JPAFSR_UMS (1UL << 46UL) /* jp */ - -/* Uncorrectable system bus data ECC error for read of interrupt vector */ -#define CHAFSR_IVU (1UL << 45UL) /* ch,ch+,jp */ - -/* Unmapped error from system bus */ -#define CHAFSR_TO (1UL << 44UL) /* ch,ch+,jp */ - -/* Bus error response from system bus */ -#define CHAFSR_BERR (1UL << 43UL) /* ch,ch+,jp */ - -/* SW Correctable E-cache ECC error for instruction fetch or data access - * other than block load. - */ -#define CHAFSR_UCC (1UL << 42UL) /* ch,ch+,jp */ - -/* Uncorrectable E-cache ECC error for instruction fetch or data access - * other than block load. - */ -#define CHAFSR_UCU (1UL << 41UL) /* ch,ch+,jp */ - -/* Copyout HW Corrected ECC error */ -#define CHAFSR_CPC (1UL << 40UL) /* ch,ch+,jp */ - -/* Copyout Uncorrectable ECC error */ -#define CHAFSR_CPU (1UL << 39UL) /* ch,ch+,jp */ - -/* HW Corrected ECC error from E-cache for writeback */ -#define CHAFSR_WDC (1UL << 38UL) /* ch,ch+,jp */ - -/* Uncorrectable ECC error from E-cache for writeback */ -#define CHAFSR_WDU (1UL << 37UL) /* ch,ch+,jp */ - -/* HW Corrected ECC error from E-cache for store merge or block load */ -#define CHAFSR_EDC (1UL << 36UL) /* ch,ch+,jp */ - -/* Uncorrectable ECC error from E-cache for store merge or block load */ -#define CHAFSR_EDU (1UL << 35UL) /* ch,ch+,jp */ - -/* Uncorrectable system bus data ECC error for read of memory or I/O */ -#define CHAFSR_UE (1UL << 34UL) /* ch,ch+,jp */ - -/* HW Corrected system bus data ECC error for read of memory or I/O */ -#define CHAFSR_CE (1UL << 33UL) /* ch,ch+,jp */ - -/* Uncorrectable ECC error from remote cache/memory */ -#define JPAFSR_RUE (1UL << 32UL) /* jp */ - -/* Correctable ECC error from remote cache/memory */ -#define JPAFSR_RCE (1UL << 31UL) /* jp */ - -/* JBUS parity error on returned read data */ -#define JPAFSR_BP (1UL << 30UL) /* jp */ - -/* JBUS parity error on data for writeback or block store */ -#define JPAFSR_WBP (1UL << 29UL) /* jp */ - -/* Foreign read to DRAM incurring correctable ECC error */ -#define JPAFSR_FRC (1UL << 28UL) /* jp */ - -/* Foreign read to DRAM incurring uncorrectable ECC error */ -#define JPAFSR_FRU (1UL << 27UL) /* jp */ - -#define CHAFSR_ERRORS (CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ - CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ - CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ - CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ - CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) -#define CHPAFSR_ERRORS (CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \ - CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \ - CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ - CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ - CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ - CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ - CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) -#define JPAFSR_ERRORS (JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \ - JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \ - CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \ - JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \ - CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \ - CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \ - CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \ - CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \ - JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \ - JPAFSR_FRC | JPAFSR_FRU) - -/* Active JBUS request signal when error occurred */ -#define JPAFSR_JBREQ (0x7UL << 24UL) /* jp */ -#define JPAFSR_JBREQ_SHIFT 24UL - -/* L2 cache way information */ -#define JPAFSR_ETW (0x3UL << 22UL) /* jp */ -#define JPAFSR_ETW_SHIFT 22UL - -/* System bus MTAG ECC syndrome. This field captures the status of the - * first occurrence of the highest-priority error according to the M_SYND - * overwrite policy. After the AFSR sticky bit, corresponding to the error - * for which the M_SYND is reported, is cleared, the contents of the M_SYND - * field will be unchanged by will be unfrozen for further error capture. - */ -#define CHAFSR_M_SYNDROME (0xfUL << 16UL) /* ch,ch+,jp */ -#define CHAFSR_M_SYNDROME_SHIFT 16UL - -/* Agenid Id of the foreign device causing the UE/CE errors */ -#define JPAFSR_AID (0x1fUL << 9UL) /* jp */ -#define JPAFSR_AID_SHIFT 9UL - -/* System bus or E-cache data ECC syndrome. This field captures the status - * of the first occurrence of the highest-priority error according to the - * E_SYND overwrite policy. After the AFSR sticky bit, corresponding to the - * error for which the E_SYND is reported, is cleare, the contents of the E_SYND - * field will be unchanged but will be unfrozen for further error capture. - */ -#define CHAFSR_E_SYNDROME (0x1ffUL << 0UL) /* ch,ch+,jp */ -#define CHAFSR_E_SYNDROME_SHIFT 0UL - -/* The AFSR must be explicitly cleared by software, it is not cleared automatically - * by a read. Writes to bits <51:33> with bits set will clear the corresponding - * bits in the AFSR. Bits associated with disrupting traps must be cleared before - * interrupts are re-enabled to prevent multiple traps for the same error. I.e. - * PSTATE.IE and AFSR bits control delivery of disrupting traps. - * - * Since there is only one AFAR, when multiple events have been logged by the - * bits in the AFSR, at most one of these events will have its status captured - * in the AFAR. The highest priority of those event bits will get AFAR logging. - * The AFAR will be unlocked and available to capture the address of another event - * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is - * cleared. For example, if AFSR.CE is detected, then AFSR.UE (which overwrites - * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked - * and ready for another event, even though AFSR.CE is still set. The same rules - * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR. - */ - -#endif /* _SPARC64_CHAFSR_H */ +#include <asm-sparc/chafsr.h> diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h index 859b4a4b0d3..eb757b483b3 100644 --- a/include/asm-sparc64/chmctrl.h +++ b/include/asm-sparc64/chmctrl.h @@ -1,183 +1 @@ -#ifndef _SPARC64_CHMCTRL_H -#define _SPARC64_CHMCTRL_H - -/* Cheetah memory controller programmable registers. */ -#define CHMCTRL_TCTRL1 0x00 /* Memory Timing Control I */ -#define CHMCTRL_TCTRL2 0x08 /* Memory Timing Control II */ -#define CHMCTRL_TCTRL3 0x38 /* Memory Timing Control III */ -#define CHMCTRL_TCTRL4 0x40 /* Memory Timing Control IV */ -#define CHMCTRL_DECODE1 0x10 /* Memory Address Decode I */ -#define CHMCTRL_DECODE2 0x18 /* Memory Address Decode II */ -#define CHMCTRL_DECODE3 0x20 /* Memory Address Decode III */ -#define CHMCTRL_DECODE4 0x28 /* Memory Address Decode IV */ -#define CHMCTRL_MACTRL 0x30 /* Memory Address Control */ - -/* Memory Timing Control I */ -#define TCTRL1_SDRAMCTL_DLY 0xf000000000000000UL -#define TCTRL1_SDRAMCTL_DLY_SHIFT 60 -#define TCTRL1_SDRAMCLK_DLY 0x0e00000000000000UL -#define TCTRL1_SDRAMCLK_DLY_SHIFT 57 -#define TCTRL1_R 0x0100000000000000UL -#define TCTRL1_R_SHIFT 56 -#define TCTRL1_AUTORFR_CYCLE 0x00fe000000000000UL -#define TCTRL1_AUTORFR_CYCLE_SHIFT 49 -#define TCTRL1_RD_WAIT 0x0001f00000000000UL -#define TCTRL1_RD_WAIT_SHIFT 44 -#define TCTRL1_PC_CYCLE 0x00000fc000000000UL -#define TCTRL1_PC_CYCLE_SHIFT 38 -#define TCTRL1_WR_MORE_RAS_PW 0x0000003f00000000UL -#define TCTRL1_WR_MORE_RAS_PW_SHIFT 32 -#define TCTRL1_RD_MORE_RAW_PW 0x00000000fc000000UL -#define TCTRL1_RD_MORE_RAS_PW_SHIFT 26 -#define TCTRL1_ACT_WR_DLY 0x0000000003f00000UL -#define TCTRL1_ACT_WR_DLY_SHIFT 20 -#define TCTRL1_ACT_RD_DLY 0x00000000000fc000UL -#define TCTRL1_ACT_RD_DLY_SHIFT 14 -#define TCTRL1_BANK_PRESENT 0x0000000000003000UL -#define TCTRL1_BANK_PRESENT_SHIFT 12 -#define TCTRL1_RFR_INT 0x0000000000000ff8UL -#define TCTRL1_RFR_INT_SHIFT 3 -#define TCTRL1_SET_MODE_REG 0x0000000000000004UL -#define TCTRL1_SET_MODE_REG_SHIFT 2 -#define TCTRL1_RFR_ENABLE 0x0000000000000002UL -#define TCTRL1_RFR_ENABLE_SHIFT 1 -#define TCTRL1_PRECHG_ALL 0x0000000000000001UL -#define TCTRL1_PRECHG_ALL_SHIFT 0 - -/* Memory Timing Control II */ -#define TCTRL2_WR_MSEL_DLY 0xfc00000000000000UL -#define TCTRL2_WR_MSEL_DLY_SHIFT 58 -#define TCTRL2_RD_MSEL_DLY 0x03f0000000000000UL -#define TCTRL2_RD_MSEL_DLY_SHIFT 52 -#define TCTRL2_WRDATA_THLD 0x000c000000000000UL -#define TCTRL2_WRDATA_THLD_SHIFT 50 -#define TCTRL2_RDWR_RD_TI_DLY 0x0003f00000000000UL -#define TCTRL2_RDWR_RD_TI_DLY_SHIFT 44 -#define TCTRL2_AUTOPRECHG_ENBL 0x0000080000000000UL -#define TCTRL2_AUTOPRECHG_ENBL_SHIFT 43 -#define TCTRL2_RDWR_PI_MORE_DLY 0x000007c000000000UL -#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38 -#define TCTRL2_RDWR_1_DLY 0x0000003f00000000UL -#define TCTRL2_RDWR_1_DLY_SHIFT 32 -#define TCTRL2_WRWR_PI_MORE_DLY 0x00000000f8000000UL -#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27 -#define TCTRL2_WRWR_1_DLY 0x0000000007e00000UL -#define TCTRL2_WRWR_1_DLY_SHIFT 21 -#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL -#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16 -#define TCTRL2_R 0x0000000000008000UL -#define TCTRL2_R_SHIFT 15 -#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL -#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0 - -/* Memory Timing Control III */ -#define TCTRL3_SDRAM_CTL_DLY 0xf000000000000000UL -#define TCTRL3_SDRAM_CTL_DLY_SHIFT 60 -#define TCTRL3_SDRAM_CLK_DLY 0x0e00000000000000UL -#define TCTRL3_SDRAM_CLK_DLY_SHIFT 57 -#define TCTRL3_R 0x0100000000000000UL -#define TCTRL3_R_SHIFT 56 -#define TCTRL3_AUTO_RFR_CYCLE 0x00fe000000000000UL -#define TCTRL3_AUTO_RFR_CYCLE_SHIFT 49 -#define TCTRL3_RD_WAIT 0x0001f00000000000UL -#define TCTRL3_RD_WAIT_SHIFT 44 -#define TCTRL3_PC_CYCLE 0x00000fc000000000UL -#define TCTRL3_PC_CYCLE_SHIFT 38 -#define TCTRL3_WR_MORE_RAW_PW 0x0000003f00000000UL -#define TCTRL3_WR_MORE_RAW_PW_SHIFT 32 -#define TCTRL3_RD_MORE_RAW_PW 0x00000000fc000000UL -#define TCTRL3_RD_MORE_RAW_PW_SHIFT 26 -#define TCTRL3_ACT_WR_DLY 0x0000000003f00000UL -#define TCTRL3_ACT_WR_DLY_SHIFT 20 -#define TCTRL3_ACT_RD_DLY 0x00000000000fc000UL -#define TCTRL3_ACT_RD_DLY_SHIFT 14 -#define TCTRL3_BANK_PRESENT 0x0000000000003000UL -#define TCTRL3_BANK_PRESENT_SHIFT 12 -#define TCTRL3_RFR_INT 0x0000000000000ff8UL -#define TCTRL3_RFR_INT_SHIFT 3 -#define TCTRL3_SET_MODE_REG 0x0000000000000004UL -#define TCTRL3_SET_MODE_REG_SHIFT 2 -#define TCTRL3_RFR_ENABLE 0x0000000000000002UL -#define TCTRL3_RFR_ENABLE_SHIFT 1 -#define TCTRL3_PRECHG_ALL 0x0000000000000001UL -#define TCTRL3_PRECHG_ALL_SHIFT 0 - -/* Memory Timing Control IV */ -#define TCTRL4_WR_MSEL_DLY 0xfc00000000000000UL -#define TCTRL4_WR_MSEL_DLY_SHIFT 58 -#define TCTRL4_RD_MSEL_DLY 0x03f0000000000000UL -#define TCTRL4_RD_MSEL_DLY_SHIFT 52 -#define TCTRL4_WRDATA_THLD 0x000c000000000000UL -#define TCTRL4_WRDATA_THLD_SHIFT 50 -#define TCTRL4_RDWR_RD_RI_DLY 0x0003f00000000000UL -#define TCTRL4_RDWR_RD_RI_DLY_SHIFT 44 -#define TCTRL4_AUTO_PRECHG_ENBL 0x0000080000000000UL -#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43 -#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL -#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38 -#define TCTRL4_RD_WR_TI_DLY 0x0000003f00000000UL -#define TCTRL4_RD_WR_TI_DLY_SHIFT 32 -#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL -#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27 -#define TCTRL4_WR_WR_TI_DLY 0x0000000007e00000UL -#define TCTRL4_WR_WR_TI_DLY_SHIFT 21 -#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0 -#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16 -#define TCTRL4_R 0x0000000000008000UL -#define TCTRL4_R_SHIFT 15 -#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL -#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0 - -/* All 4 memory address decoding registers have the - * same layout. - */ -#define MEM_DECODE_VALID 0x8000000000000000UL /* Valid */ -#define MEM_DECODE_VALID_SHIFT 63 -#define MEM_DECODE_UK 0x001ffe0000000000UL /* Upper mask */ -#define MEM_DECODE_UK_SHIFT 41 -#define MEM_DECODE_UM 0x0000001ffff00000UL /* Upper match */ -#define MEM_DECODE_UM_SHIFT 20 -#define MEM_DECODE_LK 0x000000000003c000UL /* Lower mask */ -#define MEM_DECODE_LK_SHIFT 14 -#define MEM_DECODE_LM 0x0000000000000f00UL /* Lower match */ -#define MEM_DECODE_LM_SHIFT 8 - -#define PA_UPPER_BITS 0x000007fffc000000UL -#define PA_UPPER_BITS_SHIFT 26 -#define PA_LOWER_BITS 0x00000000000003c0UL -#define PA_LOWER_BITS_SHIFT 6 - -#define MACTRL_R0 0x8000000000000000UL -#define MACTRL_R0_SHIFT 63 -#define MACTRL_ADDR_LE_PW 0x7000000000000000UL -#define MACTRL_ADDR_LE_PW_SHIFT 60 -#define MACTRL_CMD_PW 0x0f00000000000000UL -#define MACTRL_CMD_PW_SHIFT 56 -#define MACTRL_HALF_MODE_WR_MSEL_DLY 0x00fc000000000000UL -#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50 -#define MACTRL_HALF_MODE_RD_MSEL_DLY 0x0003f00000000000UL -#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44 -#define MACTRL_HALF_MODE_SDRAM_CTL_DLY 0x00000f0000000000UL -#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40 -#define MACTRL_HALF_MODE_SDRAM_CLK_DLY 0x000000e000000000UL -#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37 -#define MACTRL_R1 0x0000001000000000UL -#define MACTRL_R1_SHIFT 36 -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32 -#define MACTRL_ENC_INTLV_B3 0x00000000f8000000UL -#define MACTRL_ENC_INTLV_B3_SHIFT 27 -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23 -#define MACTRL_ENC_INTLV_B2 0x00000000007c0000UL -#define MACTRL_ENC_INTLV_B2_SHIFT 18 -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14 -#define MACTRL_ENC_INTLV_B1 0x0000000000003e00UL -#define MACTRL_ENC_INTLV_B1_SHIFT 9 -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL -#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT 5 -#define MACTRL_ENC_INTLV_B0 0x000000000000001fUL -#define MACTRL_ENC_INTLV_B0_SHIFT 0 - -#endif /* _SPARC64_CHMCTRL_H */ +#include <asm-sparc/chmctrl.h> diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h index 870db592857..b19b445cb81 100644 --- a/include/asm-sparc64/cmt.h +++ b/include/asm-sparc64/cmt.h @@ -1,59 +1 @@ -#ifndef _SPARC64_CMT_H -#define _SPARC64_CMT_H - -/* cmt.h: Chip Multi-Threading register definitions - * - * Copyright (C) 2004 David S. Miller (davem@redhat.com) - */ - -/* ASI_CORE_ID - private */ -#define LP_ID 0x0000000000000010UL -#define LP_ID_MAX 0x00000000003f0000UL -#define LP_ID_ID 0x000000000000003fUL - -/* ASI_INTR_ID - private */ -#define LP_INTR_ID 0x0000000000000000UL -#define LP_INTR_ID_ID 0x00000000000003ffUL - -/* ASI_CESR_ID - private */ -#define CESR_ID 0x0000000000000040UL -#define CESR_ID_ID 0x00000000000000ffUL - -/* ASI_CORE_AVAILABLE - shared */ -#define LP_AVAIL 0x0000000000000000UL -#define LP_AVAIL_1 0x0000000000000002UL -#define LP_AVAIL_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE_STATUS - shared */ -#define LP_ENAB_STAT 0x0000000000000010UL -#define LP_ENAB_STAT_1 0x0000000000000002UL -#define LP_ENAB_STAT_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE - shared */ -#define LP_ENAB 0x0000000000000020UL -#define LP_ENAB_1 0x0000000000000002UL -#define LP_ENAB_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING - shared */ -#define LP_RUNNING_RW 0x0000000000000050UL -#define LP_RUNNING_W1S 0x0000000000000060UL -#define LP_RUNNING_W1C 0x0000000000000068UL -#define LP_RUNNING_1 0x0000000000000002UL -#define LP_RUNNING_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING_STAT - shared */ -#define LP_RUN_STAT 0x0000000000000058UL -#define LP_RUN_STAT_1 0x0000000000000002UL -#define LP_RUN_STAT_0 0x0000000000000001UL - -/* ASI_XIR_STEERING - shared */ -#define LP_XIR_STEER 0x0000000000000030UL -#define LP_XIR_STEER_1 0x0000000000000002UL -#define LP_XIR_STEER_0 0x0000000000000001UL - -/* ASI_CMT_ERROR_STEERING - shared */ -#define CMT_ER_STEER 0x0000000000000040UL -#define CMT_ER_STEER_1 0x0000000000000002UL -#define CMT_ER_STEER_0 0x0000000000000001UL - -#endif /* _SPARC64_CMT_H */ +#include <asm-sparc/cmt.h> diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h index f260b58f5ce..8c155d22195 100644 --- a/include/asm-sparc64/compat.h +++ b/include/asm-sparc64/compat.h @@ -1,243 +1 @@ -#ifndef _ASM_SPARC64_COMPAT_H -#define _ASM_SPARC64_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include <linux/types.h> - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; -typedef u16 __compat_uid_t; -typedef u16 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u16 compat_mode_t; -typedef u32 compat_ino_t; -typedef u16 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef s16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid_t st_uid; - __compat_gid_t st_gid; - compat_dev_t st_rdev; - compat_off_t st_size; - compat_time_t st_atime; - compat_ulong_t st_atime_nsec; - compat_time_t st_mtime; - compat_ulong_t st_mtime_nsec; - compat_time_t st_ctime; - compat_ulong_t st_ctime_nsec; - compat_off_t st_blksize; - compat_off_t st_blocks; - u32 __unused4[2]; -}; - -struct compat_stat64 { - unsigned long long st_dev; - - unsigned long long st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned int st_uid; - unsigned int st_gid; - - unsigned long long st_rdev; - - unsigned char __pad3[8]; - - long long st_size; - unsigned int st_blksize; - - unsigned char __pad4[8]; - unsigned int st_blocks; - - unsigned int st_atime; - unsigned int st_atime_nsec; - - unsigned int st_mtime; - unsigned int st_mtime_nsec; - - unsigned int st_ctime; - unsigned int st_ctime_nsec; - - unsigned int __unused4; - unsigned int __unused5; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; - short __unused; -}; - -#define F_GETLK64 12 -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; - short __unused; -}; - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_INFINITY 0x7fffffff - -typedef u32 compat_old_sigset_t; - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - struct pt_regs *regs = current_thread_info()->kregs; - unsigned long usp = regs->u_regs[UREG_I6]; - - if (!(test_thread_flag(TIF_32BIT))) - usp += STACK_BIAS; - else - usp &= 0xffffffffUL; - - usp -= len; - usp &= ~0x7UL; - - return (void __user *) usp; -} - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - unsigned short __pad1; - compat_mode_t mode; - unsigned short __pad2; - unsigned short seq; - unsigned long __unused1; /* yes they really are 64bit pads */ - unsigned long __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - unsigned int __pad1; - compat_time_t sem_otime; - unsigned int __pad2; - compat_time_t sem_ctime; - u32 sem_nsems; - u32 __unused1; - u32 __unused2; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - unsigned int __pad1; - compat_time_t msg_stime; - unsigned int __pad2; - compat_time_t msg_rtime; - unsigned int __pad3; - compat_time_t msg_ctime; - unsigned int msg_cbytes; - unsigned int msg_qnum; - unsigned int msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - unsigned int __unused1; - unsigned int __unused2; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - unsigned int __pad1; - compat_time_t shm_atime; - unsigned int __pad2; - compat_time_t shm_dtime; - unsigned int __pad3; - compat_time_t shm_ctime; - compat_size_t shm_segsz; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - unsigned int shm_nattch; - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _ASM_SPARC64_COMPAT_H */ +#include <asm-sparc/compat.h> diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h index b759eab9b51..7187dcc8cac 100644 --- a/include/asm-sparc64/compat_signal.h +++ b/include/asm-sparc64/compat_signal.h @@ -1,29 +1 @@ -#ifndef _COMPAT_SIGNAL_H -#define _COMPAT_SIGNAL_H - -#include <linux/compat.h> -#include <asm/signal.h> - -#ifdef CONFIG_COMPAT -struct __new_sigaction32 { - unsigned sa_handler; - unsigned int sa_flags; - unsigned sa_restorer; /* not used by Linux/SPARC yet */ - compat_sigset_t sa_mask; -}; - -struct __old_sigaction32 { - unsigned sa_handler; - compat_old_sigset_t sa_mask; - unsigned int sa_flags; - unsigned sa_restorer; /* not used by Linux/SPARC yet */ -}; - -typedef struct sigaltstack32 { - u32 ss_sp; - int ss_flags; - compat_size_t ss_size; -} stack_t32; -#endif - -#endif /* !(_COMPAT_SIGNAL_H) */ +#include <asm-sparc/compat_signal.h> diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h index 620c9ba642e..d67613b1f5f 100644 --- a/include/asm-sparc64/dcr.h +++ b/include/asm-sparc64/dcr.h @@ -1,14 +1 @@ -#ifndef _SPARC64_DCR_H -#define _SPARC64_DCR_H - -/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */ -#define DCR_DPE 0x0000000000001000 /* III+: D$ Parity Error Enable */ -#define DCR_OBS 0x0000000000000fc0 /* Observability Bus Controls */ -#define DCR_BPE 0x0000000000000020 /* Branch Predict Enable */ -#define DCR_RPE 0x0000000000000010 /* Return Address Prediction Enable */ -#define DCR_SI 0x0000000000000008 /* Single Instruction Disable */ -#define DCR_IPE 0x0000000000000004 /* III+: I$ Parity Error Enable */ -#define DCR_IFPOE 0x0000000000000002 /* IRQ FP Operation Enable */ -#define DCR_MS 0x0000000000000001 /* Multi-Scalar dispatch */ - -#endif /* _SPARC64_DCR_H */ +#include <asm-sparc/dcr.h> diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h index 0f704e106a1..28853f4968d 100644 --- a/include/asm-sparc64/dcu.h +++ b/include/asm-sparc64/dcu.h @@ -1,27 +1 @@ -#ifndef _SPARC64_DCU_H -#define _SPARC64_DCU_H - -#include <linux/const.h> - -/* UltraSparc-III Data Cache Unit Control Register */ -#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */ -#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */ -#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */ -#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */ -#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */ -#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */ -#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */ -#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/ -#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */ -#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */ -#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */ -#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */ -#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/ -#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */ -#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/ -#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */ -#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */ -#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */ -#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */ - -#endif /* _SPARC64_DCU_H */ +#include <asm-sparc/dcu.h> diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h index 520c08560d1..bedd0ef5f19 100644 --- a/include/asm-sparc64/estate.h +++ b/include/asm-sparc64/estate.h @@ -1,49 +1 @@ -#ifndef _SPARC64_ESTATE_H -#define _SPARC64_ESTATE_H - -/* UltraSPARC-III E-cache Error Enable */ -#define ESTATE_ERROR_FMT 0x0000000000040000 /* Force MTAG ECC */ -#define ESTATE_ERROR_FMESS 0x000000000003c000 /* Forced MTAG ECC val */ -#define ESTATE_ERROR_FMD 0x0000000000002000 /* Force DATA ECC */ -#define ESTATE_ERROR_FDECC 0x0000000000001ff0 /* Forced DATA ECC val */ -#define ESTATE_ERROR_UCEEN 0x0000000000000008 /* See below */ -#define ESTATE_ERROR_NCEEN 0x0000000000000002 /* See below */ -#define ESTATE_ERROR_CEEN 0x0000000000000001 /* See below */ - -/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache - * errors 2) uncorrectable E-cache errors. Such events only occur on reads - * of the E-cache by the local processor for: 1) data loads 2) instruction - * fetches 3) atomic operations. Such events _cannot_ occur for: 1) merge - * 2) writeback 2) copyout. The AFSR bits associated with these traps are - * UCC and UCU. - */ - -/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps - * for uncorrectable ECC errors and system errors. - * - * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT, - * or system bus BusERR: - * 1) As the result of an instruction fetch, will generate instruction_access_error - * 2) As the result of a load etc. will generate data_access_error. - * 3) As the result of store merge completion, writeback, or copyout will - * generate a disrupting ECC_error trap. - * 4) As the result of such errors on instruction vector fetch can generate any - * of the 3 trap types. - * - * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE, - * BERR, and TO. - */ - -/* CEEN enables the ECC_error trap for hardware corrected ECC errors. System bus - * reads resulting in a hardware corrected data or MTAG ECC error will generate an - * ECC_error disrupting trap with this bit enabled. - * - * This same trap will also be generated when a hardware corrected ECC error results - * during store merge, writeback, and copyout operations. - */ - -/* In general, if the trap enable bits above are disabled the AFSR bits will still - * log the events even though the trap will not be generated by the processor. - */ - -#endif /* _SPARC64_ESTATE_H */ +#include <asm-sparc/estate.h> diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h index 788cbc46a11..73eb04c19c4 100644 --- a/include/asm-sparc64/fhc.h +++ b/include/asm-sparc64/fhc.h @@ -1,121 +1 @@ -/* - * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire. - * - * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com) - */ - -#ifndef _SPARC64_FHC_H -#define _SPARC64_FHC_H - -#include <linux/timer.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/upa.h> - -struct linux_fhc; - -/* Clock board register offsets. */ -#define CLOCK_CTRL 0x00UL /* Main control */ -#define CLOCK_STAT1 0x10UL /* Status one */ -#define CLOCK_STAT2 0x20UL /* Status two */ -#define CLOCK_PWRSTAT 0x30UL /* Power status */ -#define CLOCK_PWRPRES 0x40UL /* Power presence */ -#define CLOCK_TEMP 0x50UL /* Temperature */ -#define CLOCK_IRQDIAG 0x60UL /* IRQ diagnostics */ -#define CLOCK_PWRSTAT2 0x70UL /* Power status two */ - -#define CLOCK_CTRL_LLED 0x04 /* Left LED, 0 == on */ -#define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */ -#define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */ - -struct linux_central { - struct linux_fhc *child; - unsigned long cfreg; - unsigned long clkregs; - unsigned long clkver; - int slots; - struct device_node *prom_node; - - struct linux_prom_ranges central_ranges[PROMREG_MAX]; - int num_central_ranges; -}; - -/* Firehose controller register offsets */ -struct fhc_regs { - unsigned long pregs; /* FHC internal regs */ -#define FHC_PREGS_ID 0x00UL /* FHC ID */ -#define FHC_ID_VERS 0xf0000000 /* Version of this FHC */ -#define FHC_ID_PARTID 0x0ffff000 /* Part ID code (0x0f9f == FHC) */ -#define FHC_ID_MANUF 0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/ -#define FHC_ID_RESV 0x00000001 /* Read as one */ -#define FHC_PREGS_RCS 0x10UL /* FHC Reset Control/Status Register */ -#define FHC_RCS_POR 0x80000000 /* Last reset was a power cycle */ -#define FHC_RCS_SPOR 0x40000000 /* Last reset was sw power on reset */ -#define FHC_RCS_SXIR 0x20000000 /* Last reset was sw XIR reset */ -#define FHC_RCS_BPOR 0x10000000 /* Last reset was due to POR button */ -#define FHC_RCS_BXIR 0x08000000 /* Last reset was due to XIR button */ -#define FHC_RCS_WEVENT 0x04000000 /* CPU reset was due to wakeup event */ -#define FHC_RCS_CFATAL 0x02000000 /* Centerplane Fatal Error signalled */ -#define FHC_RCS_FENAB 0x01000000 /* Fatal errors elicit system reset */ -#define FHC_PREGS_CTRL 0x20UL /* FHC Control Register */ -#define FHC_CONTROL_ICS 0x00100000 /* Ignore Centerplane Signals */ -#define FHC_CONTROL_FRST 0x00080000 /* Fatal Error Reset Enable */ -#define FHC_CONTROL_LFAT 0x00040000 /* AC/DC signalled a local error */ -#define FHC_CONTROL_SLINE 0x00010000 /* Firmware Synchronization Line */ -#define FHC_CONTROL_DCD 0x00008000 /* DC-->DC Converter Disable */ -#define FHC_CONTROL_POFF 0x00004000 /* AC/DC Controller PLL Disable */ -#define FHC_CONTROL_FOFF 0x00002000 /* FHC Controller PLL Disable */ -#define FHC_CONTROL_AOFF 0x00001000 /* CPU A SRAM/SBD Low Power Mode */ -#define FHC_CONTROL_BOFF 0x00000800 /* CPU B SRAM/SBD Low Power Mode */ -#define FHC_CONTROL_PSOFF 0x00000400 /* Turns off this FHC's power supply */ -#define FHC_CONTROL_IXIST 0x00000200 /* 0=FHC tells clock board it exists */ -#define FHC_CONTROL_XMSTR 0x00000100 /* 1=Causes this FHC to be XIR master*/ -#define FHC_CONTROL_LLED 0x00000040 /* 0=Left LED ON */ -#define FHC_CONTROL_MLED 0x00000020 /* 1=Middle LED ON */ -#define FHC_CONTROL_RLED 0x00000010 /* 1=Right LED */ -#define FHC_CONTROL_BPINS 0x00000003 /* Spare Bidirectional Pins */ -#define FHC_PREGS_BSR 0x30UL /* FHC Board Status Register */ -#define FHC_BSR_DA64 0x00040000 /* Port A: 0=128bit 1=64bit data path */ -#define FHC_BSR_DB64 0x00020000 /* Port B: 0=128bit 1=64bit data path */ -#define FHC_BSR_BID 0x0001e000 /* Board ID */ -#define FHC_BSR_SA 0x00001c00 /* Port A UPA Speed (from the pins) */ -#define FHC_BSR_SB 0x00000380 /* Port B UPA Speed (from the pins) */ -#define FHC_BSR_NDIAG 0x00000040 /* Not in Diag Mode */ -#define FHC_BSR_NTBED 0x00000020 /* Not in TestBED Mode */ -#define FHC_BSR_NIA 0x0000001c /* Jumper, bit 18 in PROM space */ -#define FHC_BSR_SI 0x00000001 /* Spare input pin value */ -#define FHC_PREGS_ECC 0x40UL /* FHC ECC Control Register (16 bits) */ -#define FHC_PREGS_JCTRL 0xf0UL /* FHC JTAG Control Register */ -#define FHC_JTAG_CTRL_MENAB 0x80000000 /* Indicates this is JTAG Master */ -#define FHC_JTAG_CTRL_MNONE 0x40000000 /* Indicates no JTAG Master present */ -#define FHC_PREGS_JCMD 0x100UL /* FHC JTAG Command Register */ - unsigned long ireg; /* FHC IGN reg */ -#define FHC_IREG_IGN 0x00UL /* This FHC's IGN */ - unsigned long ffregs; /* FHC fanfail regs */ -#define FHC_FFREGS_IMAP 0x00UL /* FHC Fanfail IMAP */ -#define FHC_FFREGS_ICLR 0x10UL /* FHC Fanfail ICLR */ - unsigned long sregs; /* FHC system regs */ -#define FHC_SREGS_IMAP 0x00UL /* FHC System IMAP */ -#define FHC_SREGS_ICLR 0x10UL /* FHC System ICLR */ - unsigned long uregs; /* FHC uart regs */ -#define FHC_UREGS_IMAP 0x00UL /* FHC Uart IMAP */ -#define FHC_UREGS_ICLR 0x10UL /* FHC Uart ICLR */ - unsigned long tregs; /* FHC TOD regs */ -#define FHC_TREGS_IMAP 0x00UL /* FHC TOD IMAP */ -#define FHC_TREGS_ICLR 0x10UL /* FHC TOD ICLR */ -}; - -struct linux_fhc { - struct linux_fhc *next; - struct linux_central *parent; /* NULL if not central FHC */ - struct fhc_regs fhc_regs; - int board; - int jtag_master; - struct device_node *prom_node; - - struct linux_prom_ranges fhc_ranges[PROMREG_MAX]; - int num_fhc_ranges; -}; - -#endif /* !(_SPARC64_FHC_H) */ +#include <asm-sparc/fhc.h> diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h index cc463fec806..30d6d0f68bc 100644 --- a/include/asm-sparc64/fpumacro.h +++ b/include/asm-sparc64/fpumacro.h @@ -1,33 +1 @@ -/* fpumacro.h: FPU related macros. - * - * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC64_FPUMACRO_H -#define _SPARC64_FPUMACRO_H - -#include <asm/asi.h> -#include <asm/visasm.h> - -struct fpustate { - u32 regs[64]; -}; - -#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs) - -static inline unsigned long fprs_read(void) -{ - unsigned long retval; - - __asm__ __volatile__("rd %%fprs, %0" : "=r" (retval)); - - return retval; -} - -static inline void fprs_write(unsigned long val) -{ - __asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val)); -} - -#endif /* !(_SPARC64_FPUMACRO_H) */ +#include <asm-sparc/fpumacro.h> diff --git a/include/asm-sparc64/hugetlb.h b/include/asm-sparc64/hugetlb.h index 412af58926a..21d8f0a9c24 100644 --- a/include/asm-sparc64/hugetlb.h +++ b/include/asm-sparc64/hugetlb.h @@ -1,84 +1 @@ -#ifndef _ASM_SPARC64_HUGETLB_H -#define _ASM_SPARC64_HUGETLB_H - -#include <asm/page.h> - - -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - -void hugetlb_prefault_arch_hook(struct mm_struct *mm); - -static inline int is_hugepage_only_range(struct mm_struct *mm, - unsigned long addr, - unsigned long len) { - return 0; -} - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - -static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb, - unsigned long addr, unsigned long end, - unsigned long floor, - unsigned long ceiling) -{ - free_pgd_range(tlb, addr, end, floor, ceiling); -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_SPARC64_HUGETLB_H */ +#include <asm-sparc/hugetlb.h> diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h index b2b9b947b3a..fb46bfe934a 100644 --- a/include/asm-sparc64/hvtramp.h +++ b/include/asm-sparc64/hvtramp.h @@ -1,37 +1 @@ -#ifndef _SPARC64_HVTRAP_H -#define _SPARC64_HVTRAP_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -struct hvtramp_mapping { - __u64 vaddr; - __u64 tte; -}; - -struct hvtramp_descr { - __u32 cpu; - __u32 num_mappings; - __u64 fault_info_va; - __u64 fault_info_pa; - __u64 thread_reg; - struct hvtramp_mapping maps[1]; -}; - -extern void hv_cpu_startup(unsigned long hvdescr_pa); - -#endif - -#define HVTRAMP_DESCR_CPU 0x00 -#define HVTRAMP_DESCR_NUM_MAPPINGS 0x04 -#define HVTRAMP_DESCR_FAULT_INFO_VA 0x08 -#define HVTRAMP_DESCR_FAULT_INFO_PA 0x10 -#define HVTRAMP_DESCR_THREAD_REG 0x18 -#define HVTRAMP_DESCR_MAPS 0x20 - -#define HVTRAMP_MAPPING_VADDR 0x00 -#define HVTRAMP_MAPPING_TTE 0x08 -#define HVTRAMP_MAPPING_SIZE 0x10 - -#endif /* _SPARC64_HVTRAP_H */ +#include <asm-sparc/hvtramp.h> diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h index 3ad45dff52f..fe7e51a9e42 100644 --- a/include/asm-sparc64/hypervisor.h +++ b/include/asm-sparc64/hypervisor.h @@ -1,2945 +1 @@ -#ifndef _SPARC64_HYPERVISOR_H -#define _SPARC64_HYPERVISOR_H - -/* Sun4v hypervisor interfaces and defines. - * - * Hypervisor calls are made via traps to software traps number 0x80 - * and above. Registers %o0 to %o5 serve as argument, status, and - * return value registers. - * - * There are two kinds of these traps. First there are the normal - * "fast traps" which use software trap 0x80 and encode the function - * to invoke by number in register %o5. Argument and return value - * handling is as follows: - * - * ----------------------------------------------- - * | %o5 | function number | undefined | - * | %o0 | argument 0 | return status | - * | %o1 | argument 1 | return value 1 | - * | %o2 | argument 2 | return value 2 | - * | %o3 | argument 3 | return value 3 | - * | %o4 | argument 4 | return value 4 | - * ----------------------------------------------- - * - * The second type are "hyper-fast traps" which encode the function - * number in the software trap number itself. So these use trap - * numbers > 0x80. The register usage for hyper-fast traps is as - * follows: - * - * ----------------------------------------------- - * | %o0 | argument 0 | return status | - * | %o1 | argument 1 | return value 1 | - * | %o2 | argument 2 | return value 2 | - * | %o3 | argument 3 | return value 3 | - * | %o4 | argument 4 | return value 4 | - * ----------------------------------------------- - * - * Registers providing explicit arguments to the hypervisor calls - * are volatile across the call. Upon return their values are - * undefined unless explicitly specified as containing a particular - * return value by the specific call. The return status is always - * returned in register %o0, zero indicates a successful execution of - * the hypervisor call and other values indicate an error status as - * defined below. So, for example, if a hyper-fast trap takes - * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across - * the call and %o3, %o4, and %o5 would be preserved. - * - * If the hypervisor trap is invalid, or the fast trap function number - * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits - * of the argument and return values are significant. - */ - -/* Trap numbers. */ -#define HV_FAST_TRAP 0x80 -#define HV_MMU_MAP_ADDR_TRAP 0x83 -#define HV_MMU_UNMAP_ADDR_TRAP 0x84 -#define HV_TTRACE_ADDENTRY_TRAP 0x85 -#define HV_CORE_TRAP 0xff - -/* Error codes. */ -#define HV_EOK 0 /* Successful return */ -#define HV_ENOCPU 1 /* Invalid CPU id */ -#define HV_ENORADDR 2 /* Invalid real address */ -#define HV_ENOINTR 3 /* Invalid interrupt id */ -#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ -#define HV_EBADTSB 5 /* Invalid TSB description */ -#define HV_EINVAL 6 /* Invalid argument */ -#define HV_EBADTRAP 7 /* Invalid function number */ -#define HV_EBADALIGN 8 /* Invalid address alignment */ -#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ -#define HV_ENOACCESS 10 /* No access to resource */ -#define HV_EIO 11 /* I/O error */ -#define HV_ECPUERROR 12 /* CPU in error state */ -#define HV_ENOTSUPPORTED 13 /* Function not supported */ -#define HV_ENOMAP 14 /* No mapping found */ -#define HV_ETOOMANY 15 /* Too many items specified */ -#define HV_ECHANNEL 16 /* Invalid LDC channel */ -#define HV_EBUSY 17 /* Resource busy */ - -/* mach_exit() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_EXIT - * ARG0: exit code - * ERRORS: This service does not return. - * - * Stop all CPUs in the virtual domain and place them into the stopped - * state. The 64-bit exit code may be passed to a service entity as - * the domain's exit status. On systems without a service entity, the - * domain will undergo a reset, and the boot firmware will be - * reloaded. - * - * This function will never return to the guest that invokes it. - * - * Note: By convention an exit code of zero denotes a successful exit by - * the guest code. A non-zero exit code denotes a guest specific - * error indication. - * - */ -#define HV_FAST_MACH_EXIT 0x00 - -#ifndef __ASSEMBLY__ -extern void sun4v_mach_exit(unsigned long exit_code); -#endif - -/* Domain services. */ - -/* mach_desc() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_DESC - * ARG0: buffer - * ARG1: length - * RET0: status - * RET1: length - * ERRORS: HV_EBADALIGN Buffer is badly aligned - * HV_ENORADDR Buffer is to an illegal real address. - * HV_EINVAL Buffer length is too small for complete - * machine description. - * - * Copy the most current machine description into the buffer indicated - * by the real address in ARG0. The buffer provided must be 16 byte - * aligned. Upon success or HV_EINVAL, this service returns the - * actual size of the machine description in the RET1 return value. - * - * Note: A method of determining the appropriate buffer size for the - * machine description is to first call this service with a buffer - * length of 0 bytes. - */ -#define HV_FAST_MACH_DESC 0x01 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, - unsigned long buf_len, - unsigned long *real_buf_len); -#endif - -/* mach_sir() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SIR - * ERRORS: This service does not return. - * - * Perform a software initiated reset of the virtual machine domain. - * All CPUs are captured as soon as possible, all hardware devices are - * returned to the entry default state, and the domain is restarted at - * the SIR (trap type 0x04) real trap table (RTBA) entry point on one - * of the CPUs. The single CPU restarted is selected as determined by - * platform specific policy. Memory is preserved across this - * operation. - */ -#define HV_FAST_MACH_SIR 0x02 - -#ifndef __ASSEMBLY__ -extern void sun4v_mach_sir(void); -#endif - -/* mach_set_watchdog() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SET_WATCHDOG - * ARG0: timeout in milliseconds - * RET0: status - * RET1: time remaining in milliseconds - * - * A guest uses this API to set a watchdog timer. Once the gues has set - * the timer, it must call the timer service again either to disable or - * postpone the expiration. If the timer expires before being reset or - * disabled, then the hypervisor take a platform specific action leading - * to guest termination within a bounded time period. The platform action - * may include recovery actions such as reporting the expiration to a - * Service Processor, and/or automatically restarting the gues. - * - * The 'timeout' parameter is specified in milliseconds, however the - * implementated granularity is given by the 'watchdog-resolution' - * property in the 'platform' node of the guest's machine description. - * The largest allowed timeout value is specified by the - * 'watchdog-max-timeout' property of the 'platform' node. - * - * If the 'timeout' argument is not zero, the watchdog timer is set to - * expire after a minimum of 'timeout' milliseconds. - * - * If the 'timeout' argument is zero, the watchdog timer is disabled. - * - * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' - * property, the hypervisor leaves the watchdog timer state unchanged, - * and returns a status of EINVAL. - * - * The 'time remaining' return value is valid regardless of whether the - * return status is EOK or EINVAL. A non-zero return value indicates the - * number of milliseconds that were remaining until the timer was to expire. - * If less than one millisecond remains, the return value is '1'. If the - * watchdog timer was disabled at the time of the call, the return value is - * zero. - * - * If the hypervisor cannot support the exact timeout value requested, but - * can support a larger timeout value, the hypervisor may round the actual - * timeout to a value larger than the requested timeout, consequently the - * 'time remaining' return value may be larger than the previously requested - * timeout value. - * - * Any guest OS debugger should be aware that the watchdog service may be in - * use. Consequently, it is recommended that the watchdog service is - * disabled upon debugger entry (e.g. reaching a breakpoint), and then - * re-enabled upon returning to normal execution. The API has been designed - * with this in mind, and the 'time remaining' result of the disable call may - * be used directly as the timeout argument of the re-enable call. - */ -#define HV_FAST_MACH_SET_WATCHDOG 0x05 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, - unsigned long *orig_timeout); -#endif - -/* CPU services. - * - * CPUs represent devices that can execute software threads. A single - * chip that contains multiple cores or strands is represented as - * multiple CPUs with unique CPU identifiers. CPUs are exported to - * OBP via the machine description (and to the OS via the OBP device - * tree). CPUs are always in one of three states: stopped, running, - * or error. - * - * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a - * CPU within a logical domain. Operations that are to be performed - * on multiple CPUs specify them via a CPU list. A CPU list is an - * array in real memory, of which each 16-bit word is a CPU ID. CPU - * lists are passed through the API as two arguments. The first is - * the number of entries (16-bit words) in the CPU list, and the - * second is the (real address) pointer to the CPU ID list. - */ - -/* cpu_start() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_START - * ARG0: CPU ID - * ARG1: PC - * ARG2: RTBA - * ARG3: target ARG0 - * RET0: status - * ERRORS: ENOCPU Invalid CPU ID - * EINVAL Target CPU ID is not in the stopped state - * ENORADDR Invalid PC or RTBA real address - * EBADALIGN Unaligned PC or unaligned RTBA - * EWOULDBLOCK Starting resources are not available - * - * Start CPU with given CPU ID with PC in %pc and with a real trap - * base address value of RTBA. The indicated CPU must be in the - * stopped state. The supplied RTBA must be aligned on a 256 byte - * boundary. On successful completion, the specified CPU will be in - * the running state and will be supplied with "target ARG0" in %o0 - * and RTBA in %tba. - */ -#define HV_FAST_CPU_START 0x10 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_start(unsigned long cpuid, - unsigned long pc, - unsigned long rtba, - unsigned long arg0); -#endif - -/* cpu_stop() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_STOP - * ARG0: CPU ID - * RET0: status - * ERRORS: ENOCPU Invalid CPU ID - * EINVAL Target CPU ID is the current cpu - * EINVAL Target CPU ID is not in the running state - * EWOULDBLOCK Stopping resources are not available - * ENOTSUPPORTED Not supported on this platform - * - * The specified CPU is stopped. The indicated CPU must be in the - * running state. On completion, it will be in the stopped state. It - * is not legal to stop the current CPU. - * - * Note: As this service cannot be used to stop the current cpu, this service - * may not be used to stop the last running CPU in a domain. To stop - * and exit a running domain, a guest must use the mach_exit() service. - */ -#define HV_FAST_CPU_STOP 0x11 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_stop(unsigned long cpuid); -#endif - -/* cpu_yield() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_YIELD - * RET0: status - * ERRORS: No possible error. - * - * Suspend execution on the current CPU. Execution will resume when - * an interrupt (device, %stick_compare, or cross-call) is targeted to - * the CPU. On some CPUs, this API may be used by the hypervisor to - * save power by disabling hardware strands. - */ -#define HV_FAST_CPU_YIELD 0x12 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_yield(void); -#endif - -/* cpu_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_QCONF - * ARG0: queue - * ARG1: base real address - * ARG2: number of entries - * RET0: status - * ERRORS: ENORADDR Invalid base real address - * EINVAL Invalid queue or number of entries is less - * than 2 or too large. - * EBADALIGN Base real address is not correctly aligned - * for size. - * - * Configure the given queue to be placed at the given base real - * address, with the given number of entries. The number of entries - * must be a power of 2. The base real address must be aligned - * exactly to match the queue size. Each queue entry is 64 bytes - * long, so for example a 32 entry queue must be aligned on a 2048 - * byte real address boundary. - * - * The specified queue is unconfigured if the number of entries is given - * as zero. - * - * For the current version of this API service, the argument queue is defined - * as follows: - * - * queue description - * ----- ------------------------- - * 0x3c cpu mondo queue - * 0x3d device mondo queue - * 0x3e resumable error queue - * 0x3f non-resumable error queue - * - * Note: The maximum number of entries for each queue for a specific cpu may - * be determined from the machine description. - */ -#define HV_FAST_CPU_QCONF 0x14 -#define HV_CPU_QUEUE_CPU_MONDO 0x3c -#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d -#define HV_CPU_QUEUE_RES_ERROR 0x3e -#define HV_CPU_QUEUE_NONRES_ERROR 0x3f - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_qconf(unsigned long type, - unsigned long queue_paddr, - unsigned long num_queue_entries); -#endif - -/* cpu_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_QINFO - * ARG0: queue - * RET0: status - * RET1: base real address - * RET1: number of entries - * ERRORS: EINVAL Invalid queue - * - * Return the configuration info for the given queue. The base real - * address and number of entries of the defined queue are returned. - * The queue argument values are the same as for cpu_qconf() above. - * - * If the specified queue is a valid queue number, but no queue has - * been defined, the number of entries will be set to zero and the - * base real address returned is undefined. - */ -#define HV_FAST_CPU_QINFO 0x15 - -/* cpu_mondo_send() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_MONDO_SEND - * ARG0-1: CPU list - * ARG2: data real address - * RET0: status - * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list - * is not 2-byte aligned. - * ENORADDR Invalid data mondo address, or invalid cpu list - * address. - * ENOCPU Invalid cpu in CPU list - * EWOULDBLOCK Some or all of the listed CPUs did not receive - * the mondo - * ECPUERROR One or more of the listed CPUs are in error - * state, use HV_FAST_CPU_STATE to see which ones - * EINVAL CPU list includes caller's CPU ID - * - * Send a mondo interrupt to the CPUs in the given CPU list with the - * 64-bytes at the given data real address. The data must be 64-byte - * aligned. The mondo data will be delivered to the cpu_mondo queues - * of the recipient CPUs. - * - * In all cases, error or not, the CPUs in the CPU list to which the - * mondo has been successfully delivered will be indicated by having - * their entry in CPU list updated with the value 0xffff. - */ -#define HV_FAST_CPU_MONDO_SEND 0x42 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); -#endif - -/* cpu_myid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_MYID - * RET0: status - * RET1: CPU ID - * ERRORS: No errors defined. - * - * Return the hypervisor ID handle for the current CPU. Use by a - * virtual CPU to discover it's own identity. - */ -#define HV_FAST_CPU_MYID 0x16 - -/* cpu_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_STATE - * ARG0: CPU ID - * RET0: status - * RET1: state - * ERRORS: ENOCPU Invalid CPU ID - * - * Retrieve the current state of the CPU with the given CPU ID. - */ -#define HV_FAST_CPU_STATE 0x17 -#define HV_CPU_STATE_STOPPED 0x01 -#define HV_CPU_STATE_RUNNING 0x02 -#define HV_CPU_STATE_ERROR 0x03 - -#ifndef __ASSEMBLY__ -extern long sun4v_cpu_state(unsigned long cpuid); -#endif - -/* cpu_set_rtba() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_SET_RTBA - * ARG0: RTBA - * RET0: status - * RET1: previous RTBA - * ERRORS: ENORADDR Invalid RTBA real address - * EBADALIGN RTBA is incorrectly aligned for a trap table - * - * Set the real trap base address of the local cpu to the given RTBA. - * The supplied RTBA must be aligned on a 256 byte boundary. Upon - * success the previous value of the RTBA is returned in RET1. - * - * Note: This service does not affect %tba - */ -#define HV_FAST_CPU_SET_RTBA 0x18 - -/* cpu_set_rtba() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_GET_RTBA - * RET0: status - * RET1: previous RTBA - * ERRORS: No possible error. - * - * Returns the current value of RTBA in RET1. - */ -#define HV_FAST_CPU_GET_RTBA 0x19 - -/* MMU services. - * - * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. - */ -#ifndef __ASSEMBLY__ -struct hv_tsb_descr { - unsigned short pgsz_idx; - unsigned short assoc; - unsigned int num_ttes; /* in TTEs */ - unsigned int ctx_idx; - unsigned int pgsz_mask; - unsigned long tsb_base; - unsigned long resv; -}; -#endif -#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 -#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 -#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 -#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 -#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c -#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 -#define HV_TSB_DESCR_RESV_OFFSET 0x18 - -/* Page size bitmask. */ -#define HV_PGSZ_MASK_8K (1 << 0) -#define HV_PGSZ_MASK_64K (1 << 1) -#define HV_PGSZ_MASK_512K (1 << 2) -#define HV_PGSZ_MASK_4MB (1 << 3) -#define HV_PGSZ_MASK_32MB (1 << 4) -#define HV_PGSZ_MASK_256MB (1 << 5) -#define HV_PGSZ_MASK_2GB (1 << 6) -#define HV_PGSZ_MASK_16GB (1 << 7) - -/* Page size index. The value given in the TSB descriptor must correspond - * to the smallest page size specified in the pgsz_mask page size bitmask. - */ -#define HV_PGSZ_IDX_8K 0 -#define HV_PGSZ_IDX_64K 1 -#define HV_PGSZ_IDX_512K 2 -#define HV_PGSZ_IDX_4MB 3 -#define HV_PGSZ_IDX_32MB 4 -#define HV_PGSZ_IDX_256MB 5 -#define HV_PGSZ_IDX_2GB 6 -#define HV_PGSZ_IDX_16GB 7 - -/* MMU fault status area. - * - * MMU related faults have their status and fault address information - * placed into a memory region made available by privileged code. Each - * virtual processor must make a mmu_fault_area_conf() call to tell the - * hypervisor where that processor's fault status should be stored. - * - * The fault status block is a multiple of 64-bytes and must be aligned - * on a 64-byte boundary. - */ -#ifndef __ASSEMBLY__ -struct hv_fault_status { - unsigned long i_fault_type; - unsigned long i_fault_addr; - unsigned long i_fault_ctx; - unsigned long i_reserved[5]; - unsigned long d_fault_type; - unsigned long d_fault_addr; - unsigned long d_fault_ctx; - unsigned long d_reserved[5]; -}; -#endif -#define HV_FAULT_I_TYPE_OFFSET 0x00 -#define HV_FAULT_I_ADDR_OFFSET 0x08 -#define HV_FAULT_I_CTX_OFFSET 0x10 -#define HV_FAULT_D_TYPE_OFFSET 0x40 -#define HV_FAULT_D_ADDR_OFFSET 0x48 -#define HV_FAULT_D_CTX_OFFSET 0x50 - -#define HV_FAULT_TYPE_FAST_MISS 1 -#define HV_FAULT_TYPE_FAST_PROT 2 -#define HV_FAULT_TYPE_MMU_MISS 3 -#define HV_FAULT_TYPE_INV_RA 4 -#define HV_FAULT_TYPE_PRIV_VIOL 5 -#define HV_FAULT_TYPE_PROT_VIOL 6 -#define HV_FAULT_TYPE_NFO 7 -#define HV_FAULT_TYPE_NFO_SEFF 8 -#define HV_FAULT_TYPE_INV_VA 9 -#define HV_FAULT_TYPE_INV_ASI 10 -#define HV_FAULT_TYPE_NC_ATOMIC 11 -#define HV_FAULT_TYPE_PRIV_ACT 12 -#define HV_FAULT_TYPE_RESV1 13 -#define HV_FAULT_TYPE_UNALIGNED 14 -#define HV_FAULT_TYPE_INV_PGSZ 15 -/* Values 16 --> -2 are reserved. */ -#define HV_FAULT_TYPE_MULTIPLE -1 - -/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), - * and mmu_{map,unmap}_perm_addr(). - */ -#define HV_MMU_DMMU 0x01 -#define HV_MMU_IMMU 0x02 -#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) - -/* mmu_map_addr() - * TRAP: HV_MMU_MAP_ADDR_TRAP - * ARG0: virtual address - * ARG1: mmu context - * ARG2: TTE - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * ERRORS: EINVAL Invalid virtual address, mmu context, or flags - * EBADPGSZ Invalid page size value - * ENORADDR Invalid real address in TTE - * - * Create a non-permanent mapping using the given TTE, virtual - * address, and mmu context. The flags argument determines which - * (data, or instruction, or both) TLB the mapping gets loaded into. - * - * The behavior is undefined if the valid bit is clear in the TTE. - * - * Note: This API call is for privileged code to specify temporary translation - * mappings without the need to create and manage a TSB. - */ - -/* mmu_unmap_addr() - * TRAP: HV_MMU_UNMAP_ADDR_TRAP - * ARG0: virtual address - * ARG1: mmu context - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * ERRORS: EINVAL Invalid virtual address, mmu context, or flags - * - * Demaps the given virtual address in the given mmu context on this - * CPU. This function is intended to be used to demap pages mapped - * with mmu_map_addr. This service is equivalent to invoking - * mmu_demap_page() with only the current CPU in the CPU list. The - * flags argument determines which (data, or instruction, or both) TLB - * the mapping gets unmapped from. - * - * Attempting to perform an unmap operation for a previously defined - * permanent mapping will have undefined results. - */ - -/* mmu_tsb_ctx0() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTX0 - * ARG0: number of TSB descriptions - * ARG1: TSB descriptions pointer - * RET0: status - * ERRORS: ENORADDR Invalid TSB descriptions pointer or - * TSB base within a descriptor - * EBADALIGN TSB descriptions pointer is not aligned - * to an 8-byte boundary, or TSB base - * within a descriptor is not aligned for - * the given TSB size - * EBADPGSZ Invalid page size in a TSB descriptor - * EBADTSB Invalid associativity or size in a TSB - * descriptor - * EINVAL Invalid number of TSB descriptions, or - * invalid context index in a TSB - * descriptor, or index page size not - * equal to smallest page size in page - * size bitmask field. - * - * Configures the TSBs for the current CPU for virtual addresses with - * context zero. The TSB descriptions pointer is a pointer to an - * array of the given number of TSB descriptions. - * - * Note: The maximum number of TSBs available to a virtual CPU is given by the - * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the - * machine description. - */ -#define HV_FAST_MMU_TSB_CTX0 0x20 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, - unsigned long tsb_desc_ra); -#endif - -/* mmu_tsb_ctxnon0() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 - * ARG0: number of TSB descriptions - * ARG1: TSB descriptions pointer - * RET0: status - * ERRORS: Same as for mmu_tsb_ctx0() above. - * - * Configures the TSBs for the current CPU for virtual addresses with - * non-zero contexts. The TSB descriptions pointer is a pointer to an - * array of the given number of TSB descriptions. - * - * Note: A maximum of 16 TSBs may be specified in the TSB description list. - */ -#define HV_FAST_MMU_TSB_CTXNON0 0x21 - -/* mmu_demap_page() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_PAGE - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: virtual address - * ARG3: mmu context - * ARG4: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address, context, or - * flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps any page mapping of the given virtual address in the given - * mmu context for the current virtual CPU. Any virtually tagged - * caches are guaranteed to be kept consistent. The flags argument - * determines which TLB (instruction, or data, or both) participate in - * the operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_PAGE 0x22 - -/* mmu_demap_ctx() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_CTX - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: mmu context - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid context or flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps all non-permanent virtual page mappings previously specified - * for the given context for the current virtual CPU. Any virtual - * tagged caches are guaranteed to be kept consistent. The flags - * argument determines which TLB (instruction, or data, or both) - * participate in the operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_CTX 0x23 - -/* mmu_demap_all() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_ALL - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps all non-permanent virtual page mappings previously specified - * for the current virtual CPU. Any virtual tagged caches are - * guaranteed to be kept consistent. The flags argument determines - * which TLB (instruction, or data, or both) participate in the - * operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_ALL 0x24 - -#ifndef __ASSEMBLY__ -extern void sun4v_mmu_demap_all(void); -#endif - -/* mmu_map_perm_addr() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR - * ARG0: virtual address - * ARG1: reserved, must be zero - * ARG2: TTE - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value - * EBADPGSZ Invalid page size value - * ENORADDR Invalid real address in TTE - * ETOOMANY Too many mappings (max of 8 reached) - * - * Create a permanent mapping using the given TTE and virtual address - * for context 0 on the calling virtual CPU. A maximum of 8 such - * permanent mappings may be specified by privileged code. Mappings - * may be removed with mmu_unmap_perm_addr(). - * - * The behavior is undefined if a TTE with the valid bit clear is given. - * - * Note: This call is used to specify address space mappings for which - * privileged code does not expect to receive misses. For example, - * this mechanism can be used to map kernel nucleus code and data. - */ -#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, - unsigned long set_to_zero, - unsigned long tte, - unsigned long flags); -#endif - -/* mmu_fault_area_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF - * ARG0: real address - * RET0: status - * RET1: previous mmu fault area real address - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Invalid alignment for fault area - * - * Configure the MMU fault status area for the calling CPU. A 64-byte - * aligned real address specifies where MMU fault status information - * is placed. The return value is the previously specified area, or 0 - * for the first invocation. Specifying a fault area at real address - * 0 is not allowed. - */ -#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 - -/* mmu_enable() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_ENABLE - * ARG0: enable flag - * ARG1: return target address - * RET0: status - * ERRORS: ENORADDR Invalid real address when disabling - * translation. - * EBADALIGN The return target address is not - * aligned to an instruction. - * EINVAL The enable flag request the current - * operating mode (e.g. disable if already - * disabled) - * - * Enable or disable virtual address translation for the calling CPU - * within the virtual machine domain. If the enable flag is zero, - * translation is disabled, any non-zero value will enable - * translation. - * - * When this function returns, the newly selected translation mode - * will be active. If the mmu is being enabled, then the return - * target address is a virtual address else it is a real address. - * - * Upon successful completion, control will be returned to the given - * return target address (ie. the cpu will jump to that address). On - * failure, the previous mmu mode remains and the trap simply returns - * as normal with the appropriate error code in RET0. - */ -#define HV_FAST_MMU_ENABLE 0x27 - -/* mmu_unmap_perm_addr() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR - * ARG0: virtual address - * ARG1: reserved, must be zero - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value - * ENOMAP Specified mapping was not found - * - * Demaps any permanent page mapping (established via - * mmu_map_perm_addr()) at the given virtual address for context 0 on - * the current virtual CPU. Any virtual tagged caches are guaranteed - * to be kept consistent. - */ -#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 - -/* mmu_tsb_ctx0_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO - * ARG0: max TSBs - * ARG1: buffer pointer - * RET0: status - * RET1: number of TSBs - * ERRORS: EINVAL Supplied buffer is too small - * EBADALIGN The buffer pointer is badly aligned - * ENORADDR Invalid real address for buffer pointer - * - * Return the TSB configuration as previous defined by mmu_tsb_ctx0() - * into the provided buffer. The size of the buffer is given in ARG1 - * in terms of the number of TSB description entries. - * - * Upon return, RET1 always contains the number of TSB descriptions - * previously configured. If zero TSBs were configured, EOK is - * returned with RET1 containing 0. - */ -#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 - -/* mmu_tsb_ctxnon0_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO - * ARG0: max TSBs - * ARG1: buffer pointer - * RET0: status - * RET1: number of TSBs - * ERRORS: EINVAL Supplied buffer is too small - * EBADALIGN The buffer pointer is badly aligned - * ENORADDR Invalid real address for buffer pointer - * - * Return the TSB configuration as previous defined by - * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer - * is given in ARG1 in terms of the number of TSB description entries. - * - * Upon return, RET1 always contains the number of TSB descriptions - * previously configured. If zero TSBs were configured, EOK is - * returned with RET1 containing 0. - */ -#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a - -/* mmu_fault_area_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO - * RET0: status - * RET1: fault area real address - * ERRORS: No errors defined. - * - * Return the currently defined MMU fault status area for the current - * CPU. The real address of the fault status area is returned in - * RET1, or 0 is returned in RET1 if no fault status area is defined. - * - * Note: mmu_fault_area_conf() may be called with the return value (RET1) - * from this service if there is a need to save and restore the fault - * area for a cpu. - */ -#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b - -/* Cache and Memory services. */ - -/* mem_scrub() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MEM_SCRUB - * ARG0: real address - * ARG1: length - * RET0: status - * RET1: length scrubbed - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Start address or length are not correctly - * aligned - * EINVAL Length is zero - * - * Zero the memory contents in the range real address to real address - * plus length minus 1. Also, valid ECC will be generated for that - * memory address range. Scrubbing is started at the given real - * address, but may not scrub the entire given length. The actual - * length scrubbed will be returned in RET1. - * - * The real address and length must be aligned on an 8K boundary, or - * contain the start address and length from a sun4v error report. - * - * Note: There are two uses for this function. The first use is to block clear - * and initialize memory and the second is to scrub an u ncorrectable - * error reported via a resumable or non-resumable trap. The second - * use requires the arguments to be equal to the real address and length - * provided in a sun4v memory error report. - */ -#define HV_FAST_MEM_SCRUB 0x31 - -/* mem_sync() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MEM_SYNC - * ARG0: real address - * ARG1: length - * RET0: status - * RET1: length synced - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Start address or length are not correctly - * aligned - * EINVAL Length is zero - * - * Force the next access within the real address to real address plus - * length minus 1 to be fetches from main system memory. Less than - * the given length may be synced, the actual amount synced is - * returned in RET1. The real address and length must be aligned on - * an 8K boundary. - */ -#define HV_FAST_MEM_SYNC 0x32 - -/* Time of day services. - * - * The hypervisor maintains the time of day on a per-domain basis. - * Changing the time of day in one domain does not affect the time of - * day on any other domain. - * - * Time is described by a single unsigned 64-bit word which is the - * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, - * 1970). - */ - -/* tod_get() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TOD_GET - * RET0: status - * RET1: TOD - * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable - * ENOTSUPPORTED If TOD not supported on this platform - * - * Return the current time of day. May block if TOD access is - * temporarily not possible. - */ -#define HV_FAST_TOD_GET 0x50 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_tod_get(unsigned long *time); -#endif - -/* tod_set() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TOD_SET - * ARG0: TOD - * RET0: status - * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable - * ENOTSUPPORTED If TOD not supported on this platform - * - * The current time of day is set to the value specified in ARG0. May - * block if TOD access is temporarily not possible. - */ -#define HV_FAST_TOD_SET 0x51 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_tod_set(unsigned long time); -#endif - -/* Console services */ - -/* con_getchar() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_GETCHAR - * RET0: status - * RET1: character - * ERRORS: EWOULDBLOCK No character available. - * - * Returns a character from the console device. If no character is - * available then an EWOULDBLOCK error is returned. If a character is - * available, then the returned status is EOK and the character value - * is in RET1. - * - * A virtual BREAK is represented by the 64-bit value -1. - * - * A virtual HUP signal is represented by the 64-bit value -2. - */ -#define HV_FAST_CONS_GETCHAR 0x60 - -/* con_putchar() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_PUTCHAR - * ARG0: character - * RET0: status - * ERRORS: EINVAL Illegal character - * EWOULDBLOCK Output buffer currently full, would block - * - * Send a character to the console device. Only character values - * between 0 and 255 may be used. Values outside this range are - * invalid except for the 64-bit value -1 which is used to send a - * virtual BREAK. - */ -#define HV_FAST_CONS_PUTCHAR 0x61 - -/* con_read() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_READ - * ARG0: buffer real address - * ARG1: buffer size in bytes - * RET0: status - * RET1: bytes read or BREAK or HUP - * ERRORS: EWOULDBLOCK No character available. - * - * Reads characters into a buffer from the console device. If no - * character is available then an EWOULDBLOCK error is returned. - * If a character is available, then the returned status is EOK - * and the number of bytes read into the given buffer is provided - * in RET1. - * - * A virtual BREAK is represented by the 64-bit RET1 value -1. - * - * A virtual HUP signal is represented by the 64-bit RET1 value -2. - * - * If BREAK or HUP are indicated, no bytes were read into buffer. - */ -#define HV_FAST_CONS_READ 0x62 - -/* con_write() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_WRITE - * ARG0: buffer real address - * ARG1: buffer size in bytes - * RET0: status - * RET1: bytes written - * ERRORS: EWOULDBLOCK Output buffer currently full, would block - * - * Send a characters in buffer to the console device. Breaks must be - * sent using con_putchar(). - */ -#define HV_FAST_CONS_WRITE 0x63 - -#ifndef __ASSEMBLY__ -extern long sun4v_con_getchar(long *status); -extern long sun4v_con_putchar(long c); -extern long sun4v_con_read(unsigned long buffer, - unsigned long size, - unsigned long *bytes_read); -extern unsigned long sun4v_con_write(unsigned long buffer, - unsigned long size, - unsigned long *bytes_written); -#endif - -/* mach_set_soft_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE - * ARG0: software state - * ARG1: software state description pointer - * RET0: status - * ERRORS: EINVAL software state not valid or software state - * description is not NULL terminated - * ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned - * - * This allows the guest to report it's soft state to the hypervisor. There - * are two primary components to this state. The first part states whether - * the guest software is running or not. The second containts optional - * details specific to the software. - * - * The software state argument is defined below in HV_SOFT_STATE_*, and - * indicates whether the guest is operating normally or in a transitional - * state. - * - * The software state description argument is a real address of a data buffer - * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL - * terminated 7-bit ASCII string of up to 31 characters not including the - * NULL termination. - */ -#define HV_FAST_MACH_SET_SOFT_STATE 0x70 -#define HV_SOFT_STATE_NORMAL 0x01 -#define HV_SOFT_STATE_TRANSITION 0x02 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, - unsigned long msg_string_ra); -#endif - -/* mach_get_soft_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE - * ARG0: software state description pointer - * RET0: status - * RET1: software state - * ERRORS: ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned - * - * Retrieve the current value of the guest's software state. The rules - * for the software state pointer are the same as for mach_set_soft_state() - * above. - */ -#define HV_FAST_MACH_GET_SOFT_STATE 0x71 - -/* svc_send() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_SEND - * ARG0: service ID - * ARG1: buffer real address - * ARG2: buffer size - * RET0: STATUS - * RET1: sent_bytes - * - * Be careful, all output registers are clobbered by this operation, - * so for example it is not possible to save away a value in %o4 - * across the trap. - */ -#define HV_FAST_SVC_SEND 0x80 - -/* svc_recv() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_RECV - * ARG0: service ID - * ARG1: buffer real address - * ARG2: buffer size - * RET0: STATUS - * RET1: recv_bytes - * - * Be careful, all output registers are clobbered by this operation, - * so for example it is not possible to save away a value in %o4 - * across the trap. - */ -#define HV_FAST_SVC_RECV 0x81 - -/* svc_getstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_GETSTATUS - * ARG0: service ID - * RET0: STATUS - * RET1: status bits - */ -#define HV_FAST_SVC_GETSTATUS 0x82 - -/* svc_setstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_SETSTATUS - * ARG0: service ID - * ARG1: bits to set - * RET0: STATUS - */ -#define HV_FAST_SVC_SETSTATUS 0x83 - -/* svc_clrstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_CLRSTATUS - * ARG0: service ID - * ARG1: bits to clear - * RET0: STATUS - */ -#define HV_FAST_SVC_CLRSTATUS 0x84 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_svc_send(unsigned long svc_id, - unsigned long buffer, - unsigned long buffer_size, - unsigned long *sent_bytes); -extern unsigned long sun4v_svc_recv(unsigned long svc_id, - unsigned long buffer, - unsigned long buffer_size, - unsigned long *recv_bytes); -extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, - unsigned long *status_bits); -extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, - unsigned long status_bits); -extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, - unsigned long status_bits); -#endif - -/* Trap trace services. - * - * The hypervisor provides a trap tracing capability for privileged - * code running on each virtual CPU. Privileged code provides a - * round-robin trap trace queue within which the hypervisor writes - * 64-byte entries detailing hyperprivileged traps taken n behalf of - * privileged code. This is provided as a debugging capability for - * privileged code. - * - * The trap trace control structure is 64-bytes long and placed at the - * start (offset 0) of the trap trace buffer, and is described as - * follows: - */ -#ifndef __ASSEMBLY__ -struct hv_trap_trace_control { - unsigned long head_offset; - unsigned long tail_offset; - unsigned long __reserved[0x30 / sizeof(unsigned long)]; -}; -#endif -#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 -#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 - -/* The head offset is the offset of the most recently completed entry - * in the trap-trace buffer. The tail offset is the offset of the - * next entry to be written. The control structure is owned and - * modified by the hypervisor. A guest may not modify the control - * structure contents. Attempts to do so will result in undefined - * behavior for the guest. - * - * Each trap trace buffer entry is layed out as follows: - */ -#ifndef __ASSEMBLY__ -struct hv_trap_trace_entry { - unsigned char type; /* Hypervisor or guest entry? */ - unsigned char hpstate; /* Hyper-privileged state */ - unsigned char tl; /* Trap level */ - unsigned char gl; /* Global register level */ - unsigned short tt; /* Trap type */ - unsigned short tag; /* Extended trap identifier */ - unsigned long tstate; /* Trap state */ - unsigned long tick; /* Tick */ - unsigned long tpc; /* Trap PC */ - unsigned long f1; /* Entry specific */ - unsigned long f2; /* Entry specific */ - unsigned long f3; /* Entry specific */ - unsigned long f4; /* Entry specific */ -}; -#endif -#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 -#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 -#define HV_TRAP_TRACE_ENTRY_TL 0x02 -#define HV_TRAP_TRACE_ENTRY_GL 0x03 -#define HV_TRAP_TRACE_ENTRY_TT 0x04 -#define HV_TRAP_TRACE_ENTRY_TAG 0x06 -#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 -#define HV_TRAP_TRACE_ENTRY_TICK 0x10 -#define HV_TRAP_TRACE_ENTRY_TPC 0x18 -#define HV_TRAP_TRACE_ENTRY_F1 0x20 -#define HV_TRAP_TRACE_ENTRY_F2 0x28 -#define HV_TRAP_TRACE_ENTRY_F3 0x30 -#define HV_TRAP_TRACE_ENTRY_F4 0x38 - -/* The type field is encoded as follows. */ -#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ -#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ -#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ - -/* ttrace_buf_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_BUF_CONF - * ARG0: real address - * ARG1: number of entries - * RET0: status - * RET1: number of entries - * ERRORS: ENORADDR Invalid real address - * EINVAL Size is too small - * EBADALIGN Real address not aligned on 64-byte boundary - * - * Requests hypervisor trap tracing and declares a virtual CPU's trap - * trace buffer to the hypervisor. The real address supplies the real - * base address of the trap trace queue and must be 64-byte aligned. - * Specifying a value of 0 for the number of entries disables trap - * tracing for the calling virtual CPU. The buffer allocated must be - * sized for a power of two number of 64-byte trap trace entries plus - * an initial 64-byte control structure. - * - * This may be invoked any number of times so that a virtual CPU may - * relocate a trap trace buffer or create "snapshots" of information. - * - * If the real address is illegal or badly aligned, then trap tracing - * is disabled and an error is returned. - * - * Upon failure with EINVAL, this service call returns in RET1 the - * minimum number of buffer entries required. Upon other failures - * RET1 is undefined. - */ -#define HV_FAST_TTRACE_BUF_CONF 0x90 - -/* ttrace_buf_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_BUF_INFO - * RET0: status - * RET1: real address - * RET2: size - * ERRORS: None defined. - * - * Returns the size and location of the previously declared trap-trace - * buffer. In the event that no buffer was previously defined, or the - * buffer is disabled, this call will return a size of zero bytes. - */ -#define HV_FAST_TTRACE_BUF_INFO 0x91 - -/* ttrace_enable() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_ENABLE - * ARG0: enable - * RET0: status - * RET1: previous enable state - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Enable or disable trap tracing, and return the previous enabled - * state in RET1. Future systems may define various flags for the - * enable argument (ARG0), for the moment a guest should pass - * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all - * tracing - which will ensure future compatability. - */ -#define HV_FAST_TTRACE_ENABLE 0x92 - -/* ttrace_freeze() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_FREEZE - * ARG0: freeze - * RET0: status - * RET1: previous freeze state - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Freeze or unfreeze trap tracing, returning the previous freeze - * state in RET1. A guest should pass a non-zero value to freeze and - * a zero value to unfreeze all tracing. The returned previous state - * is 0 for not frozen and 1 for frozen. - */ -#define HV_FAST_TTRACE_FREEZE 0x93 - -/* ttrace_addentry() - * TRAP: HV_TTRACE_ADDENTRY_TRAP - * ARG0: tag (16-bits) - * ARG1: data word 0 - * ARG2: data word 1 - * ARG3: data word 2 - * ARG4: data word 3 - * RET0: status - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 - * is modified - none of the other registers holding arguments are - * volatile across this hypervisor service. - */ - -/* Core dump services. - * - * Since the hypervisor viraulizes and thus obscures a lot of the - * physical machine layout and state, traditional OS crash dumps can - * be difficult to diagnose especially when the problem is a - * configuration error of some sort. - * - * The dump services provide an opaque buffer into which the - * hypervisor can place it's internal state in order to assist in - * debugging such situations. The contents are opaque and extremely - * platform and hypervisor implementation specific. The guest, during - * a core dump, requests that the hypervisor update any information in - * the dump buffer in preparation to being dumped as part of the - * domain's memory image. - */ - -/* dump_buf_update() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_DUMP_BUF_UPDATE - * ARG0: real address - * ARG1: size - * RET0: status - * RET1: required size of dump buffer - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Real address is not aligned on a 64-byte - * boundary - * EINVAL Size is non-zero but less than minimum size - * required - * ENOTSUPPORTED Operation not supported on current logical - * domain - * - * Declare a domain dump buffer to the hypervisor. The real address - * provided for the domain dump buffer must be 64-byte aligned. The - * size specifies the size of the dump buffer and may be larger than - * the minimum size specified in the machine description. The - * hypervisor will fill the dump buffer with opaque data. - * - * Note: A guest may elect to include dump buffer contents as part of a crash - * dump to assist with debugging. This function may be called any number - * of times so that a guest may relocate a dump buffer, or create - * "snapshots" of any dump-buffer information. Each call to - * dump_buf_update() atomically declares the new dump buffer to the - * hypervisor. - * - * A specified size of 0 unconfigures the dump buffer. If the real - * address is illegal or badly aligned, then any currently active dump - * buffer is disabled and an error is returned. - * - * In the event that the call fails with EINVAL, RET1 contains the - * minimum size requires by the hypervisor for a valid dump buffer. - */ -#define HV_FAST_DUMP_BUF_UPDATE 0x94 - -/* dump_buf_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_DUMP_BUF_INFO - * RET0: status - * RET1: real address of current dump buffer - * RET2: size of current dump buffer - * ERRORS: No errors defined. - * - * Return the currently configures dump buffer description. A - * returned size of 0 bytes indicates an undefined dump buffer. In - * this case the return address in RET1 is undefined. - */ -#define HV_FAST_DUMP_BUF_INFO 0x95 - -/* Device interrupt services. - * - * Device interrupts are allocated to system bus bridges by the hypervisor, - * and described to OBP in the machine description. OBP then describes - * these interrupts to the OS via properties in the device tree. - * - * Terminology: - * - * cpuid Unique opaque value which represents a target cpu. - * - * devhandle Device handle. It uniquely identifies a device, and - * consistes of the lower 28-bits of the hi-cell of the - * first entry of the device's "reg" property in the - * OBP device tree. - * - * devino Device interrupt number. Specifies the relative - * interrupt number within the device. The unique - * combination of devhandle and devino are used to - * identify a specific device interrupt. - * - * Note: The devino value is the same as the values in the - * "interrupts" property or "interrupt-map" property - * in the OBP device tree for that device. - * - * sysino System interrupt number. A 64-bit unsigned interger - * representing a unique interrupt within a virtual - * machine. - * - * intr_state A flag representing the interrupt state for a given - * sysino. The state values are defined below. - * - * intr_enabled A flag representing the 'enabled' state for a given - * sysino. The enable values are defined below. - */ - -#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ -#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ -#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ - -#define HV_INTR_DISABLED 0 /* sysino not enabled */ -#define HV_INTR_ENABLED 1 /* sysino enabled */ - -/* intr_devino_to_sysino() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO - * ARG0: devhandle - * ARG1: devino - * RET0: status - * RET1: sysino - * ERRORS: EINVAL Invalid devhandle/devino - * - * Converts a device specific interrupt number of the given - * devhandle/devino into a system specific ino (sysino). - */ -#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, - unsigned long devino); -#endif - -/* intr_getenabled() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETENABLED - * ARG0: sysino - * RET0: status - * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) - * ERRORS: EINVAL Invalid sysino - * - * Returns interrupt enabled state in RET1 for the interrupt defined - * by the given sysino. - */ -#define HV_FAST_INTR_GETENABLED 0xa1 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_getenabled(unsigned long sysino); -#endif - -/* intr_setenabled() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETENABLED - * ARG0: sysino - * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) - * RET0: status - * ERRORS: EINVAL Invalid sysino or intr_enabled value - * - * Set the 'enabled' state of the interrupt sysino. - */ -#define HV_FAST_INTR_SETENABLED 0xa2 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); -#endif - -/* intr_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETSTATE - * ARG0: sysino - * RET0: status - * RET1: intr_state (HV_INTR_STATE_*) - * ERRORS: EINVAL Invalid sysino - * - * Returns current state of the interrupt defined by the given sysino. - */ -#define HV_FAST_INTR_GETSTATE 0xa3 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_getstate(unsigned long sysino); -#endif - -/* intr_setstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETSTATE - * ARG0: sysino - * ARG1: intr_state (HV_INTR_STATE_*) - * RET0: status - * ERRORS: EINVAL Invalid sysino or intr_state value - * - * Sets the current state of the interrupt described by the given sysino - * value. - * - * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending - * interrupt for sysino. - */ -#define HV_FAST_INTR_SETSTATE 0xa4 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); -#endif - -/* intr_gettarget() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETTARGET - * ARG0: sysino - * RET0: status - * RET1: cpuid - * ERRORS: EINVAL Invalid sysino - * - * Returns CPU that is the current target of the interrupt defined by - * the given sysino. The CPU value returned is undefined if the target - * has not been set via intr_settarget(). - */ -#define HV_FAST_INTR_GETTARGET 0xa5 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_gettarget(unsigned long sysino); -#endif - -/* intr_settarget() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETTARGET - * ARG0: sysino - * ARG1: cpuid - * RET0: status - * ERRORS: EINVAL Invalid sysino - * ENOCPU Invalid cpuid - * - * Set the target CPU for the interrupt defined by the given sysino. - */ -#define HV_FAST_INTR_SETTARGET 0xa6 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); -#endif - -/* vintr_get_cookie() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_COOKIE - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: cookie - */ -#define HV_FAST_VINTR_GET_COOKIE 0xa7 - -/* vintr_set_cookie() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_COOKIE - * ARG0: device handle - * ARG1: device ino - * ARG2: cookie - * RET0: status - */ -#define HV_FAST_VINTR_SET_COOKIE 0xa8 - -/* vintr_get_valid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_VALID - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: valid state - */ -#define HV_FAST_VINTR_GET_VALID 0xa9 - -/* vintr_set_valid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_VALID - * ARG0: device handle - * ARG1: device ino - * ARG2: valid state - * RET0: status - */ -#define HV_FAST_VINTR_SET_VALID 0xaa - -/* vintr_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_STATE - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: state - */ -#define HV_FAST_VINTR_GET_STATE 0xab - -/* vintr_set_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_STATE - * ARG0: device handle - * ARG1: device ino - * ARG2: state - * RET0: status - */ -#define HV_FAST_VINTR_SET_STATE 0xac - -/* vintr_get_target() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_TARGET - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: cpuid - */ -#define HV_FAST_VINTR_GET_TARGET 0xad - -/* vintr_set_target() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_TARGET - * ARG0: device handle - * ARG1: device ino - * ARG2: cpuid - * RET0: status - */ -#define HV_FAST_VINTR_SET_TARGET 0xae - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *cookie); -extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long cookie); -extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *valid); -extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long valid); -extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *state); -extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long state); -extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *cpuid); -extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long cpuid); -#endif - -/* PCI IO services. - * - * See the terminology descriptions in the device interrupt services - * section above as those apply here too. Here are terminology - * definitions specific to these PCI IO services: - * - * tsbnum TSB number. Indentifies which io-tsb is used. - * For this version of the specification, tsbnum - * must be zero. - * - * tsbindex TSB index. Identifies which entry in the TSB - * is used. The first entry is zero. - * - * tsbid A 64-bit aligned data structure which contains - * a tsbnum and a tsbindex. Bits 63:32 contain the - * tsbnum and bits 31:00 contain the tsbindex. - * - * Use the HV_PCI_TSBID() macro to construct such - * values. - * - * io_attributes IO attributes for IOMMU mappings. One of more - * of the attritbute bits are stores in a 64-bit - * value. The values are defined below. - * - * r_addr 64-bit real address - * - * pci_device PCI device address. A PCI device address identifies - * a specific device on a specific PCI bus segment. - * A PCI device address ia a 32-bit unsigned integer - * with the following format: - * - * 00000000.bbbbbbbb.dddddfff.00000000 - * - * Use the HV_PCI_DEVICE_BUILD() macro to construct - * such values. - * - * pci_config_offset - * PCI configureation space offset. For conventional - * PCI a value between 0 and 255. For extended - * configuration space, a value between 0 and 4095. - * - * Note: For PCI configuration space accesses, the offset - * must be aligned to the access size. - * - * error_flag A return value which specifies if the action succeeded - * or failed. 0 means no error, non-0 means some error - * occurred while performing the service. - * - * io_sync_direction - * Direction definition for pci_dma_sync(), defined - * below in HV_PCI_SYNC_*. - * - * io_page_list A list of io_page_addresses, an io_page_address is - * a real address. - * - * io_page_list_p A pointer to an io_page_list. - * - * "size based byte swap" - Some functions do size based byte swapping - * which allows sw to access pointers and - * counters in native form when the processor - * operates in a different endianness than the - * IO bus. Size-based byte swapping converts a - * multi-byte field between big-endian and - * little-endian format. - */ - -#define HV_PCI_MAP_ATTR_READ 0x01 -#define HV_PCI_MAP_ATTR_WRITE 0x02 - -#define HV_PCI_DEVICE_BUILD(b,d,f) \ - ((((b) & 0xff) << 16) | \ - (((d) & 0x1f) << 11) | \ - (((f) & 0x07) << 8)) - -#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ - ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) - -#define HV_PCI_SYNC_FOR_DEVICE 0x01 -#define HV_PCI_SYNC_FOR_CPU 0x02 - -/* pci_iommu_map() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_MAP - * ARG0: devhandle - * ARG1: tsbid - * ARG2: #ttes - * ARG3: io_attributes - * ARG4: io_page_list_p - * RET0: status - * RET1: #ttes mapped - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes - * EBADALIGN Improperly aligned real address - * ENORADDR Invalid real address - * - * Create IOMMU mappings in the sun4v device defined by the given - * devhandle. The mappings are created in the TSB defined by the - * tsbnum component of the given tsbid. The first mapping is created - * in the TSB i ndex defined by the tsbindex component of the given tsbid. - * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, - * the second at tsbnum, tsbindex + 1, etc. - * - * All mappings are created with the attributes defined by the io_attributes - * argument. The page mapping addresses are described in the io_page_list - * defined by the given io_page_list_p, which is a pointer to the io_page_list. - * The first entry in the io_page_list is the address for the first iotte, the - * 2nd for the 2nd iotte, and so on. - * - * Each io_page_address in the io_page_list must be appropriately aligned. - * #ttes must be greater than zero. For this version of the spec, the tsbnum - * component of the given tsbid must be zero. - * - * Returns the actual number of mappings creates, which may be less than - * or equal to the argument #ttes. If the function returns a value which - * is less than the #ttes, the caller may continus to call the function with - * an updated tsbid, #ttes, io_page_list_p arguments until all pages are - * mapped. - * - * Note: This function does not imply an iotte cache flush. The guest must - * demap an entry before re-mapping it. - */ -#define HV_FAST_PCI_IOMMU_MAP 0xb0 - -/* pci_iommu_demap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP - * ARG0: devhandle - * ARG1: tsbid - * ARG2: #ttes - * RET0: status - * RET1: #ttes demapped - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex - * - * Demap and flush IOMMU mappings in the device defined by the given - * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum - * component of the given tsbid, starting at the TSB index defined by the - * tsbindex component of the given tsbid. - * - * For this version of the spec, the tsbnum of the given tsbid must be zero. - * #ttes must be greater than zero. - * - * Returns the actual number of ttes demapped, which may be less than or equal - * to the argument #ttes. If #ttes demapped is less than #ttes, the caller - * may continue to call this function with updated tsbid and #ttes arguments - * until all pages are demapped. - * - * Note: Entries do not have to be mapped to be demapped. A demap of an - * unmapped page will flush the entry from the tte cache. - */ -#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 - -/* pci_iommu_getmap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP - * ARG0: devhandle - * ARG1: tsbid - * RET0: status - * RET1: io_attributes - * RET2: real address - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex - * ENOMAP Mapping is not valid, no translation exists - * - * Read and return the mapping in the device described by the given devhandle - * and tsbid. If successful, the io_attributes shall be returned in RET1 - * and the page address of the mapping shall be returned in RET2. - * - * For this version of the spec, the tsbnum component of the given tsbid - * must be zero. - */ -#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 - -/* pci_iommu_getbypass() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS - * ARG0: devhandle - * ARG1: real address - * ARG2: io_attributes - * RET0: status - * RET1: io_addr - * ERRORS: EINVAL Invalid devhandle/io_attributes - * ENORADDR Invalid real address - * ENOTSUPPORTED Function not supported in this implementation. - * - * Create a "special" mapping in the device described by the given devhandle, - * for the given real address and attributes. Return the IO address in RET1 - * if successful. - */ -#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 - -/* pci_config_get() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_CONFIG_GET - * ARG0: devhandle - * ARG1: pci_device - * ARG2: pci_config_offset - * ARG3: size - * RET0: status - * RET1: error_flag - * RET2: data - * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size - * EBADALIGN pci_config_offset not size aligned - * ENOACCESS Access to this offset is not permitted - * - * Read PCI configuration space for the adapter described by the given - * devhandle. Read size (1, 2, or 4) bytes of data from the given - * pci_device, at pci_config_offset from the beginning of the device's - * configuration space. If there was no error, RET1 is set to zero and - * RET2 is set to the data read. Insignificant bits in RET2 are not - * guarenteed to have any specific value and therefore must be ignored. - * - * The data returned in RET2 is size based byte swapped. - * - * If an error occurs during the read, set RET1 to a non-zero value. The - * given pci_config_offset must be 'size' aligned. - */ -#define HV_FAST_PCI_CONFIG_GET 0xb4 - -/* pci_config_put() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_CONFIG_PUT - * ARG0: devhandle - * ARG1: pci_device - * ARG2: pci_config_offset - * ARG3: size - * ARG4: data - * RET0: status - * RET1: error_flag - * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size - * EBADALIGN pci_config_offset not size aligned - * ENOACCESS Access to this offset is not permitted - * - * Write PCI configuration space for the adapter described by the given - * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, - * at pci_config_offset from the beginning of the device's configuration - * space. The data argument contains the data to be written to configuration - * space. Prior to writing, the data is size based byte swapped. - * - * If an error occurs during the write access, do not generate an error - * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. - * The given pci_config_offset must be 'size' aligned. - * - * This function is permitted to read from offset zero in the configuration - * space described by the given pci_device if necessary to ensure that the - * write access to config space completes. - */ -#define HV_FAST_PCI_CONFIG_PUT 0xb5 - -/* pci_peek() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_PEEK - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * RET0: status - * RET1: error_flag - * RET2: data - * ERRORS: EINVAL Invalid devhandle or size - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * ENOACCESS Guest access prohibited - * - * Attempt to read the IO address given by the given devhandle, real address, - * and size. Size must be 1, 2, 4, or 8. The read is performed as a single - * access operation using the given size. If an error occurs when reading - * from the given location, do not generate an error report, but return a - * non-zero value in RET1. If the read was successful, return zero in RET1 - * and return the actual data read in RET2. The data returned is size based - * byte swapped. - * - * Non-significant bits in RET2 are not guarenteed to have any specific value - * and therefore must be ignored. If RET1 is returned as non-zero, the data - * value is not guarenteed to have any specific value and should be ignored. - * - * The caller must have permission to read from the given devhandle, real - * address, which must be an IO address. The argument real address must be a - * size aligned address. - * - * The hypervisor implementation of this function must block access to any - * IO address that the guest does not have explicit permission to access. - */ -#define HV_FAST_PCI_PEEK 0xb6 - -/* pci_poke() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_POKE - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * ARG3: data - * ARG4: pci_device - * RET0: status - * RET1: error_flag - * ERRORS: EINVAL Invalid devhandle, size, or pci_device - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * ENOACCESS Guest access prohibited - * ENOTSUPPORTED Function is not supported by implementation - * - * Attempt to write data to the IO address given by the given devhandle, - * real address, and size. Size must be 1, 2, 4, or 8. The write is - * performed as a single access operation using the given size. Prior to - * writing the data is size based swapped. - * - * If an error occurs when writing to the given location, do not generate an - * error report, but return a non-zero value in RET1. If the write was - * successful, return zero in RET1. - * - * pci_device describes the configuration address of the device being - * written to. The implementation may safely read from offset 0 with - * the configuration space of the device described by devhandle and - * pci_device in order to guarantee that the write portion of the operation - * completes - * - * Any error that occurs due to the read shall be reported using the normal - * error reporting mechanisms .. the read error is not suppressed. - * - * The caller must have permission to write to the given devhandle, real - * address, which must be an IO address. The argument real address must be a - * size aligned address. The caller must have permission to read from - * the given devhandle, pci_device cofiguration space offset 0. - * - * The hypervisor implementation of this function must block access to any - * IO address that the guest does not have explicit permission to access. - */ -#define HV_FAST_PCI_POKE 0xb7 - -/* pci_dma_sync() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_DMA_SYNC - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * ARG3: io_sync_direction - * RET0: status - * RET1: #synced - * ERRORS: EINVAL Invalid devhandle or io_sync_direction - * ENORADDR Bad real address - * - * Synchronize a memory region described by the given real address and size, - * for the device defined by the given devhandle using the direction(s) - * defined by the given io_sync_direction. The argument size is the size of - * the memory region in bytes. - * - * Return the actual number of bytes synchronized in the return value #synced, - * which may be less than or equal to the argument size. If the return - * value #synced is less than size, the caller must continue to call this - * function with updated real address and size arguments until the entire - * memory region is synchronized. - */ -#define HV_FAST_PCI_DMA_SYNC 0xb8 - -/* PCI MSI services. */ - -#define HV_MSITYPE_MSI32 0x00 -#define HV_MSITYPE_MSI64 0x01 - -#define HV_MSIQSTATE_IDLE 0x00 -#define HV_MSIQSTATE_ERROR 0x01 - -#define HV_MSIQ_INVALID 0x00 -#define HV_MSIQ_VALID 0x01 - -#define HV_MSISTATE_IDLE 0x00 -#define HV_MSISTATE_DELIVERED 0x01 - -#define HV_MSIVALID_INVALID 0x00 -#define HV_MSIVALID_VALID 0x01 - -#define HV_PCIE_MSGTYPE_PME_MSG 0x18 -#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b -#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 -#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 -#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 - -#define HV_MSG_INVALID 0x00 -#define HV_MSG_VALID 0x01 - -/* pci_msiq_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_CONF - * ARG0: devhandle - * ARG1: msiqid - * ARG2: real address - * ARG3: number of entries - * RET0: status - * ERRORS: EINVAL Invalid devhandle, msiqid or nentries - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * - * Configure the MSI queue given by the devhandle and msiqid arguments, - * and to be placed at the given real address and be of the given - * number of entries. The real address must be aligned exactly to match - * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry - * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ - * Head and Tail are initialized so that the MSI-EQ is 'empty'. - * - * Implementation Note: Certain implementations have fixed sized queues. In - * that case, number of entries must contain the correct - * value. - */ -#define HV_FAST_PCI_MSIQ_CONF 0xc0 - -/* pci_msiq_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_INFO - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: real address - * RET2: number of entries - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Return the configuration information for the MSI queue described - * by the given devhandle and msiqid. The base address of the queue - * is returned in ARG1 and the number of entries is returned in ARG2. - * If the queue is unconfigured, the real address is undefined and the - * number of entries will be returned as zero. - */ -#define HV_FAST_PCI_MSIQ_INFO 0xc1 - -/* pci_msiq_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the valid state of the MSI-EQ described by the given devhandle and - * msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 - -/* pci_msiq_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid - * value or MSI EQ is uninitialized - * - * Set the valid state of the MSI-EQ described by the given devhandle and - * msiqid to the given msiqvalid. - */ -#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 - -/* pci_msiq_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the state of the MSI-EQ described by the given devhandle and - * msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 - -/* pci_msiq_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate - * value or MSI EQ is uninitialized - * - * Set the state of the MSI-EQ described by the given devhandle and - * msiqid to the given msiqvalid. - */ -#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 - -/* pci_msiq_gethead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqhead - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the current MSI EQ queue head for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 - -/* pci_msiq_sethead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqhead - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, - * or MSI EQ is uninitialized - * - * Set the current MSI EQ queue head for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 - -/* pci_msiq_gettail() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqtail - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the current MSI EQ queue tail for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 - -/* pci_msi_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETVALID - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msivalidstate - * ERRORS: EINVAL Invalid devhandle or msinum - * - * Get the current valid/enabled state for the MSI defined by the - * given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_GETVALID 0xc9 - -/* pci_msi_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETVALID - * ARG0: devhandle - * ARG1: msinum - * ARG2: msivalidstate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate - * - * Set the current valid/enabled state for the MSI defined by the - * given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_SETVALID 0xca - -/* pci_msi_getmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msiqid - * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound - * - * Get the MSI EQ that the MSI defined by the given devhandle and - * msinum is bound to. - */ -#define HV_FAST_PCI_MSI_GETMSIQ 0xcb - -/* pci_msi_setmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ - * ARG0: devhandle - * ARG1: msinum - * ARG2: msitype - * ARG3: msiqid - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msiqid - * - * Set the MSI EQ that the MSI defined by the given devhandle and - * msinum is bound to. - */ -#define HV_FAST_PCI_MSI_SETMSIQ 0xcc - -/* pci_msi_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETSTATE - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msistate - * ERRORS: EINVAL Invalid devhandle or msinum - * - * Get the state of the MSI defined by the given devhandle and msinum. - * If not initialized, return HV_MSISTATE_IDLE. - */ -#define HV_FAST_PCI_MSI_GETSTATE 0xcd - -/* pci_msi_setstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETSTATE - * ARG0: devhandle - * ARG1: msinum - * ARG2: msistate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msistate - * - * Set the state of the MSI defined by the given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_SETSTATE 0xce - -/* pci_msg_getmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ - * ARG0: devhandle - * ARG1: msgtype - * RET0: status - * RET1: msiqid - * ERRORS: EINVAL Invalid devhandle or msgtype - * - * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 - -/* pci_msg_setmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ - * ARG0: devhandle - * ARG1: msgtype - * ARG2: msiqid - * RET0: status - * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid - * - * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 - -/* pci_msg_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_GETVALID - * ARG0: devhandle - * ARG1: msgtype - * RET0: status - * RET1: msgvalidstate - * ERRORS: EINVAL Invalid devhandle or msgtype - * - * Get the valid/enabled state of the MSG defined by the given - * devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_GETVALID 0xd2 - -/* pci_msg_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_SETVALID - * ARG0: devhandle - * ARG1: msgtype - * ARG2: msgvalidstate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate - * - * Set the valid/enabled state of the MSG defined by the given - * devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_SETVALID 0xd3 - -/* Logical Domain Channel services. */ - -#define LDC_CHANNEL_DOWN 0 -#define LDC_CHANNEL_UP 1 -#define LDC_CHANNEL_RESETTING 2 - -/* ldc_tx_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_QCONF - * ARG0: channel ID - * ARG1: real address base of queue - * ARG2: num entries in queue - * RET0: status - * - * Configure transmit queue for the LDC endpoint specified by the - * given channel ID, to be placed at the given real address, and - * be of the given num entries. Num entries must be a power of two. - * The real address base of the queue must be aligned on the queue - * size. Each queue entry is 64-bytes, so for example, a 32 entry - * queue must be aligned on a 2048 byte real address boundary. - * - * Upon configuration of a valid transmit queue the head and tail - * pointers are set to a hypervisor specific identical value indicating - * that the queue initially is empty. - * - * The endpoint's transmit queue is un-configured if num entries is zero. - * - * The maximum number of entries for each queue for a specific cpu may be - * determined from the machine description. A transmit queue may be - * specified even in the event that the LDC is down (peer endpoint has no - * receive queue specified). Transmission will begin as soon as the peer - * endpoint defines a receive queue. - * - * It is recommended that a guest wait for a transmit queue to empty prior - * to reconfiguring it, or un-configuring it. Re or un-configuring of a - * non-empty transmit queue behaves exactly as defined above, however it - * is undefined as to how many of the pending entries in the original queue - * will be delivered prior to the re-configuration taking effect. - * Furthermore, as the queue configuration causes a reset of the head and - * tail pointers there is no way for a guest to determine how many entries - * have been sent after the configuration operation. - */ -#define HV_FAST_LDC_TX_QCONF 0xe0 - -/* ldc_tx_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_QINFO - * ARG0: channel ID - * RET0: status - * RET1: real address base of queue - * RET2: num entries in queue - * - * Return the configuration info for the transmit queue of LDC endpoint - * defined by the given channel ID. The real address is the currently - * defined real address base of the defined queue, and num entries is the - * size of the queue in terms of number of entries. - * - * If the specified channel ID is a valid endpoint number, but no transmit - * queue has been defined this service will return success, but with num - * entries set to zero and the real address will have an undefined value. - */ -#define HV_FAST_LDC_TX_QINFO 0xe1 - -/* ldc_tx_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_GET_STATE - * ARG0: channel ID - * RET0: status - * RET1: head offset - * RET2: tail offset - * RET3: channel state - * - * Return the transmit state, and the head and tail queue pointers, for - * the transmit queue of the LDC endpoint defined by the given channel ID. - * The head and tail values are the byte offset of the head and tail - * positions of the transmit queue for the specified endpoint. - */ -#define HV_FAST_LDC_TX_GET_STATE 0xe2 - -/* ldc_tx_set_qtail() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL - * ARG0: channel ID - * ARG1: tail offset - * RET0: status - * - * Update the tail pointer for the transmit queue associated with the LDC - * endpoint defined by the given channel ID. The tail offset specified - * must be aligned on a 64 byte boundary, and calculated so as to increase - * the number of pending entries on the transmit queue. Any attempt to - * decrease the number of pending transmit queue entires is considered - * an invalid tail offset and will result in an EINVAL error. - * - * Since the tail of the transmit queue may not be moved backwards, the - * transmit queue may be flushed by configuring a new transmit queue, - * whereupon the hypervisor will configure the initial transmit head and - * tail pointers to be equal. - */ -#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 - -/* ldc_rx_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_QCONF - * ARG0: channel ID - * ARG1: real address base of queue - * ARG2: num entries in queue - * RET0: status - * - * Configure receive queue for the LDC endpoint specified by the - * given channel ID, to be placed at the given real address, and - * be of the given num entries. Num entries must be a power of two. - * The real address base of the queue must be aligned on the queue - * size. Each queue entry is 64-bytes, so for example, a 32 entry - * queue must be aligned on a 2048 byte real address boundary. - * - * The endpoint's transmit queue is un-configured if num entries is zero. - * - * If a valid receive queue is specified for a local endpoint the LDC is - * in the up state for the purpose of transmission to this endpoint. - * - * The maximum number of entries for each queue for a specific cpu may be - * determined from the machine description. - * - * As receive queue configuration causes a reset of the queue's head and - * tail pointers there is no way for a gues to determine how many entries - * have been received between a preceeding ldc_get_rx_state() API call - * and the completion of the configuration operation. It should be noted - * that datagram delivery is not guarenteed via domain channels anyway, - * and therefore any higher protocol should be resilient to datagram - * loss if necessary. However, to overcome this specific race potential - * it is recommended, for example, that a higher level protocol be employed - * to ensure either retransmission, or ensure that no datagrams are pending - * on the peer endpoint's transmit queue prior to the configuration process. - */ -#define HV_FAST_LDC_RX_QCONF 0xe4 - -/* ldc_rx_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_QINFO - * ARG0: channel ID - * RET0: status - * RET1: real address base of queue - * RET2: num entries in queue - * - * Return the configuration info for the receive queue of LDC endpoint - * defined by the given channel ID. The real address is the currently - * defined real address base of the defined queue, and num entries is the - * size of the queue in terms of number of entries. - * - * If the specified channel ID is a valid endpoint number, but no receive - * queue has been defined this service will return success, but with num - * entries set to zero and the real address will have an undefined value. - */ -#define HV_FAST_LDC_RX_QINFO 0xe5 - -/* ldc_rx_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_GET_STATE - * ARG0: channel ID - * RET0: status - * RET1: head offset - * RET2: tail offset - * RET3: channel state - * - * Return the receive state, and the head and tail queue pointers, for - * the receive queue of the LDC endpoint defined by the given channel ID. - * The head and tail values are the byte offset of the head and tail - * positions of the receive queue for the specified endpoint. - */ -#define HV_FAST_LDC_RX_GET_STATE 0xe6 - -/* ldc_rx_set_qhead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD - * ARG0: channel ID - * ARG1: head offset - * RET0: status - * - * Update the head pointer for the receive queue associated with the LDC - * endpoint defined by the given channel ID. The head offset specified - * must be aligned on a 64 byte boundary, and calculated so as to decrease - * the number of pending entries on the receive queue. Any attempt to - * increase the number of pending receive queue entires is considered - * an invalid head offset and will result in an EINVAL error. - * - * The receive queue may be flushed by setting the head offset equal - * to the current tail offset. - */ -#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 - -/* LDC Map Table Entry. Each slot is defined by a translation table - * entry, as specified by the LDC_MTE_* bits below, and a 64-bit - * hypervisor invalidation cookie. - */ -#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ -#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ -#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ -#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ -#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ -#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ -#define LDC_MTE_WRITE 0x0000000000000020 /* read */ -#define LDC_MTE_READ 0x0000000000000010 /* write */ -#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ -#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ -#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ -#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ -#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ -#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ -#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ -#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ -#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ - -#ifndef __ASSEMBLY__ -struct ldc_mtable_entry { - unsigned long mte; - unsigned long cookie; -}; -#endif - -/* ldc_set_map_table() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE - * ARG0: channel ID - * ARG1: table real address - * ARG2: num entries - * RET0: status - * - * Register the MTE table at the given table real address, with the - * specified num entries, for the LDC indicated by the given channel - * ID. - */ -#define HV_FAST_LDC_SET_MAP_TABLE 0xea - -/* ldc_get_map_table() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE - * ARG0: channel ID - * RET0: status - * RET1: table real address - * RET2: num entries - * - * Return the configuration of the current mapping table registered - * for the given channel ID. - */ -#define HV_FAST_LDC_GET_MAP_TABLE 0xeb - -#define LDC_COPY_IN 0 -#define LDC_COPY_OUT 1 - -/* ldc_copy() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_COPY - * ARG0: channel ID - * ARG1: LDC_COPY_* direction code - * ARG2: target real address - * ARG3: local real address - * ARG4: length in bytes - * RET0: status - * RET1: actual length in bytes - */ -#define HV_FAST_LDC_COPY 0xec - -#define LDC_MEM_READ 1 -#define LDC_MEM_WRITE 2 -#define LDC_MEM_EXEC 4 - -/* ldc_mapin() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_MAPIN - * ARG0: channel ID - * ARG1: cookie - * RET0: status - * RET1: real address - * RET2: LDC_MEM_* permissions - */ -#define HV_FAST_LDC_MAPIN 0xed - -/* ldc_unmap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_UNMAP - * ARG0: real address - * RET0: status - */ -#define HV_FAST_LDC_UNMAP 0xee - -/* ldc_revoke() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_REVOKE - * ARG0: channel ID - * ARG1: cookie - * ARG2: ldc_mtable_entry cookie - * RET0: status - */ -#define HV_FAST_LDC_REVOKE 0xef - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, - unsigned long *head_off, - unsigned long *tail_off, - unsigned long *chan_state); -extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, - unsigned long tail_off); -extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, - unsigned long *head_off, - unsigned long *tail_off, - unsigned long *chan_state); -extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, - unsigned long head_off); -extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_copy(unsigned long channel, - unsigned long dir_code, - unsigned long tgt_raddr, - unsigned long lcl_raddr, - unsigned long len, - unsigned long *actual_len); -extern unsigned long sun4v_ldc_mapin(unsigned long channel, - unsigned long cookie, - unsigned long *ra, - unsigned long *perm); -extern unsigned long sun4v_ldc_unmap(unsigned long ra); -extern unsigned long sun4v_ldc_revoke(unsigned long channel, - unsigned long cookie, - unsigned long mte_cookie); -#endif - -/* Performance counter services. */ - -#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 -#define HV_PERF_JBUS_PERF_CNT_REG 0x01 -#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 -#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 -#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 -#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 -#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 -#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 -#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 -#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 - -/* get_perfreg() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_GET_PERFREG - * ARG0: performance reg number - * RET0: status - * RET1: performance reg value - * ERRORS: EINVAL Invalid performance register number - * ENOACCESS No access allowed to performance counters - * - * Read the value of the given DRAM/JBUS performance counter/control register. - */ -#define HV_FAST_GET_PERFREG 0x100 - -/* set_perfreg() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SET_PERFREG - * ARG0: performance reg number - * ARG1: performance reg value - * RET0: status - * ERRORS: EINVAL Invalid performance register number - * ENOACCESS No access allowed to performance counters - * - * Write the given performance reg value to the given DRAM/JBUS - * performance counter/control register. - */ -#define HV_FAST_SET_PERFREG 0x101 - -/* MMU statistics services. - * - * The hypervisor maintains MMU statistics and privileged code provides - * a buffer where these statistics can be collected. It is continually - * updated once configured. The layout is as follows: - */ -#ifndef __ASSEMBLY__ -struct hv_mmu_statistics { - unsigned long immu_tsb_hits_ctx0_8k_tte; - unsigned long immu_tsb_ticks_ctx0_8k_tte; - unsigned long immu_tsb_hits_ctx0_64k_tte; - unsigned long immu_tsb_ticks_ctx0_64k_tte; - unsigned long __reserved1[2]; - unsigned long immu_tsb_hits_ctx0_4mb_tte; - unsigned long immu_tsb_ticks_ctx0_4mb_tte; - unsigned long __reserved2[2]; - unsigned long immu_tsb_hits_ctx0_256mb_tte; - unsigned long immu_tsb_ticks_ctx0_256mb_tte; - unsigned long __reserved3[4]; - unsigned long immu_tsb_hits_ctxnon0_8k_tte; - unsigned long immu_tsb_ticks_ctxnon0_8k_tte; - unsigned long immu_tsb_hits_ctxnon0_64k_tte; - unsigned long immu_tsb_ticks_ctxnon0_64k_tte; - unsigned long __reserved4[2]; - unsigned long immu_tsb_hits_ctxnon0_4mb_tte; - unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; - unsigned long __reserved5[2]; - unsigned long immu_tsb_hits_ctxnon0_256mb_tte; - unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; - unsigned long __reserved6[4]; - unsigned long dmmu_tsb_hits_ctx0_8k_tte; - unsigned long dmmu_tsb_ticks_ctx0_8k_tte; - unsigned long dmmu_tsb_hits_ctx0_64k_tte; - unsigned long dmmu_tsb_ticks_ctx0_64k_tte; - unsigned long __reserved7[2]; - unsigned long dmmu_tsb_hits_ctx0_4mb_tte; - unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; - unsigned long __reserved8[2]; - unsigned long dmmu_tsb_hits_ctx0_256mb_tte; - unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; - unsigned long __reserved9[4]; - unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; - unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; - unsigned long __reserved10[2]; - unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; - unsigned long __reserved11[2]; - unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; - unsigned long __reserved12[4]; -}; -#endif - -/* mmustat_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMUSTAT_CONF - * ARG0: real address - * RET0: status - * RET1: real address - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Real address not aligned on 64-byte boundary - * EBADTRAP API not supported on this processor - * - * Enable MMU statistic gathering using the buffer at the given real - * address on the current virtual CPU. The new buffer real address - * is given in ARG1, and the previously specified buffer real address - * is returned in RET1, or is returned as zero for the first invocation. - * - * If the passed in real address argument is zero, this will disable - * MMU statistic collection on the current virtual CPU. If an error is - * returned then no statistics are collected. - * - * The buffer contents should be initialized to all zeros before being - * given to the hypervisor or else the statistics will be meaningless. - */ -#define HV_FAST_MMUSTAT_CONF 0x102 - -/* mmustat_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMUSTAT_INFO - * RET0: status - * RET1: real address - * ERRORS: EBADTRAP API not supported on this processor - * - * Return the current state and real address of the currently configured - * MMU statistics buffer on the current virtual CPU. - */ -#define HV_FAST_MMUSTAT_INFO 0x103 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); -extern unsigned long sun4v_mmustat_info(unsigned long *ra); -#endif - -/* NCS crypto services */ - -/* ncs_request() sub-function numbers */ -#define HV_NCS_QCONF 0x01 -#define HV_NCS_QTAIL_UPDATE 0x02 - -#ifndef __ASSEMBLY__ -struct hv_ncs_queue_entry { - /* MAU Control Register */ - unsigned long mau_control; -#define MAU_CONTROL_INV_PARITY 0x0000000000002000 -#define MAU_CONTROL_STRAND 0x0000000000001800 -#define MAU_CONTROL_BUSY 0x0000000000000400 -#define MAU_CONTROL_INT 0x0000000000000200 -#define MAU_CONTROL_OP 0x00000000000001c0 -#define MAU_CONTROL_OP_SHIFT 6 -#define MAU_OP_LOAD_MA_MEMORY 0x0 -#define MAU_OP_STORE_MA_MEMORY 0x1 -#define MAU_OP_MODULAR_MULT 0x2 -#define MAU_OP_MODULAR_REDUCE 0x3 -#define MAU_OP_MODULAR_EXP_LOOP 0x4 -#define MAU_CONTROL_LEN 0x000000000000003f -#define MAU_CONTROL_LEN_SHIFT 0 - - /* Real address of bytes to load or store bytes - * into/out-of the MAU. - */ - unsigned long mau_mpa; - - /* Modular Arithmetic MA Offset Register. */ - unsigned long mau_ma; - - /* Modular Arithmetic N Prime Register. */ - unsigned long mau_np; -}; - -struct hv_ncs_qconf_arg { - unsigned long mid; /* MAU ID, 1 per core on Niagara */ - unsigned long base; /* Real address base of queue */ - unsigned long end; /* Real address end of queue */ - unsigned long num_ents; /* Number of entries in queue */ -}; - -struct hv_ncs_qtail_update_arg { - unsigned long mid; /* MAU ID, 1 per core on Niagara */ - unsigned long tail; /* New tail index to use */ - unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ -#define HV_NCS_SYNCFLAG_SYNC 0x00 -#define HV_NCS_SYNCFLAG_ASYNC 0x01 -}; -#endif - -/* ncs_request() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_NCS_REQUEST - * ARG0: NCS sub-function - * ARG1: sub-function argument real address - * ARG2: size in bytes of sub-function argument - * RET0: status - * - * The MAU chip of the Niagara processor is not directly accessible - * to privileged code, instead it is programmed indirectly via this - * hypervisor API. - * - * The interfaces defines a queue of MAU operations to perform. - * Privileged code registers a queue with the hypervisor by invoking - * this HVAPI with the HV_NCS_QCONF sub-function, which defines the - * base, end, and number of entries of the queue. Each queue entry - * contains a MAU register struct block. - * - * The privileged code then proceeds to add entries to the queue and - * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only - * synchronous operations are supported by the current hypervisor, - * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to - * completion and return HV_EOK, or return an error code. - * - * The real address of the sub-function argument must be aligned on at - * least an 8-byte boundary. - * - * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte - * offset, into the queue and must be less than or equal the 'num_ents' - * argument given in the HV_NCS_QCONF call. - */ -#define HV_FAST_NCS_REQUEST 0x110 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_ncs_request(unsigned long request, - unsigned long arg_ra, - unsigned long arg_size); -#endif - -#define HV_FAST_FIRE_GET_PERFREG 0x120 -#define HV_FAST_FIRE_SET_PERFREG 0x121 - -/* Function numbers for HV_CORE_TRAP. */ -#define HV_CORE_SET_VER 0x00 -#define HV_CORE_PUTCHAR 0x01 -#define HV_CORE_EXIT 0x02 -#define HV_CORE_GET_VER 0x03 - -/* Hypervisor API groups for use with HV_CORE_SET_VER and - * HV_CORE_GET_VER. - */ -#define HV_GRP_SUN4V 0x0000 -#define HV_GRP_CORE 0x0001 -#define HV_GRP_INTR 0x0002 -#define HV_GRP_SOFT_STATE 0x0003 -#define HV_GRP_PCI 0x0100 -#define HV_GRP_LDOM 0x0101 -#define HV_GRP_SVC_CHAN 0x0102 -#define HV_GRP_NCS 0x0103 -#define HV_GRP_NIAG_PERF 0x0200 -#define HV_GRP_FIRE_PERF 0x0201 -#define HV_GRP_DIAG 0x0300 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_get_version(unsigned long group, - unsigned long *major, - unsigned long *minor); -extern unsigned long sun4v_set_version(unsigned long group, - unsigned long major, - unsigned long minor, - unsigned long *actual_minor); - -extern int sun4v_hvapi_register(unsigned long group, unsigned long major, - unsigned long *minor); -extern void sun4v_hvapi_unregister(unsigned long group); -extern int sun4v_hvapi_get(unsigned long group, - unsigned long *major, - unsigned long *minor); -extern void sun4v_hvapi_init(void); -#endif - -#endif /* !(_SPARC64_HYPERVISOR_H) */ +#include <asm-sparc/hypervisor.h> diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h index 206077dedc2..f7225015b3d 100644 --- a/include/asm-sparc64/intr_queue.h +++ b/include/asm-sparc64/intr_queue.h @@ -1,15 +1 @@ -#ifndef _SPARC64_INTR_QUEUE_H -#define _SPARC64_INTR_QUEUE_H - -/* Sun4v interrupt queue registers, accessed via ASI_QUEUE. */ - -#define INTRQ_CPU_MONDO_HEAD 0x3c0 /* CPU mondo head */ -#define INTRQ_CPU_MONDO_TAIL 0x3c8 /* CPU mondo tail */ -#define INTRQ_DEVICE_MONDO_HEAD 0x3d0 /* Device mondo head */ -#define INTRQ_DEVICE_MONDO_TAIL 0x3d8 /* Device mondo tail */ -#define INTRQ_RESUM_MONDO_HEAD 0x3e0 /* Resumable error mondo head */ -#define INTRQ_RESUM_MONDO_TAIL 0x3e8 /* Resumable error mondo tail */ -#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */ -#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */ - -#endif /* !(_SPARC64_INTR_QUEUE_H) */ +#include <asm-sparc/intr_queue.h> diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h index 5879d71afda..c55e43e4d2a 100644 --- a/include/asm-sparc64/kprobes.h +++ b/include/asm-sparc64/kprobes.h @@ -1,49 +1 @@ -#ifndef _SPARC64_KPROBES_H -#define _SPARC64_KPROBES_H - -#include <linux/types.h> -#include <linux/percpu.h> - -typedef u32 kprobe_opcode_t; - -#define BREAKPOINT_INSTRUCTION 0x91d02070 /* ta 0x70 */ -#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */ -#define MAX_INSN_SIZE 2 - -#define kretprobe_blacklist_size 0 - -#define arch_remove_kprobe(p) do {} while (0) - -#define flush_insn_slot(p) \ -do { flushi(&(p)->ainsn.insn[0]); \ - flushi(&(p)->ainsn.insn[1]); \ -} while (0) - -void kretprobe_trampoline(void); - -/* Architecture specific copy of original instruction*/ -struct arch_specific_insn { - /* copy of the original instruction */ - kprobe_opcode_t insn[MAX_INSN_SIZE]; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; - unsigned long orig_tnpc; - unsigned long orig_tstate_pil; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned long kprobe_status; - unsigned long kprobe_orig_tnpc; - unsigned long kprobe_orig_tstate_pil; - struct pt_regs jprobe_saved_regs; - struct prev_kprobe prev_kprobe; -}; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); -extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -#endif /* _SPARC64_KPROBES_H */ +#include <asm-sparc/kprobes.h> diff --git a/include/asm-sparc64/ldc.h b/include/asm-sparc64/ldc.h index bdb524a7b81..40f3f231c45 100644 --- a/include/asm-sparc64/ldc.h +++ b/include/asm-sparc64/ldc.h @@ -1,138 +1 @@ -#ifndef _SPARC64_LDC_H -#define _SPARC64_LDC_H - -#include <asm/hypervisor.h> - -extern int ldom_domaining_enabled; -extern void ldom_set_var(const char *var, const char *value); -extern void ldom_reboot(const char *boot_command); -extern void ldom_power_off(void); - -/* The event handler will be evoked when link state changes - * or data becomes available on the receive side. - * - * For non-RAW links, if the LDC_EVENT_RESET event arrives the - * driver should reset all of it's internal state and reinvoke - * ldc_connect() to try and bring the link up again. - * - * For RAW links, ldc_connect() is not used. Instead the driver - * just waits for the LDC_EVENT_UP event. - */ -struct ldc_channel_config { - void (*event)(void *arg, int event); - - u32 mtu; - unsigned int rx_irq; - unsigned int tx_irq; - u8 mode; -#define LDC_MODE_RAW 0x00 -#define LDC_MODE_UNRELIABLE 0x01 -#define LDC_MODE_RESERVED 0x02 -#define LDC_MODE_STREAM 0x03 - - u8 debug; -#define LDC_DEBUG_HS 0x01 -#define LDC_DEBUG_STATE 0x02 -#define LDC_DEBUG_RX 0x04 -#define LDC_DEBUG_TX 0x08 -#define LDC_DEBUG_DATA 0x10 -}; - -#define LDC_EVENT_RESET 0x01 -#define LDC_EVENT_UP 0x02 -#define LDC_EVENT_DATA_READY 0x04 - -#define LDC_STATE_INVALID 0x00 -#define LDC_STATE_INIT 0x01 -#define LDC_STATE_BOUND 0x02 -#define LDC_STATE_READY 0x03 -#define LDC_STATE_CONNECTED 0x04 - -struct ldc_channel; - -/* Allocate state for a channel. */ -extern struct ldc_channel *ldc_alloc(unsigned long id, - const struct ldc_channel_config *cfgp, - void *event_arg); - -/* Shut down and free state for a channel. */ -extern void ldc_free(struct ldc_channel *lp); - -/* Register TX and RX queues of the link with the hypervisor. */ -extern int ldc_bind(struct ldc_channel *lp, const char *name); - -/* For non-RAW protocols we need to complete a handshake before - * communication can proceed. ldc_connect() does that, if the - * handshake completes successfully, an LDC_EVENT_UP event will - * be sent up to the driver. - */ -extern int ldc_connect(struct ldc_channel *lp); -extern int ldc_disconnect(struct ldc_channel *lp); - -extern int ldc_state(struct ldc_channel *lp); - -/* Read and write operations. Only valid when the link is up. */ -extern int ldc_write(struct ldc_channel *lp, const void *buf, - unsigned int size); -extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size); - -#define LDC_MAP_SHADOW 0x01 -#define LDC_MAP_DIRECT 0x02 -#define LDC_MAP_IO 0x04 -#define LDC_MAP_R 0x08 -#define LDC_MAP_W 0x10 -#define LDC_MAP_X 0x20 -#define LDC_MAP_RW (LDC_MAP_R | LDC_MAP_W) -#define LDC_MAP_RWX (LDC_MAP_R | LDC_MAP_W | LDC_MAP_X) -#define LDC_MAP_ALL 0x03f - -struct ldc_trans_cookie { - u64 cookie_addr; - u64 cookie_size; -}; - -struct scatterlist; -extern int ldc_map_sg(struct ldc_channel *lp, - struct scatterlist *sg, int num_sg, - struct ldc_trans_cookie *cookies, int ncookies, - unsigned int map_perm); - -extern int ldc_map_single(struct ldc_channel *lp, - void *buf, unsigned int len, - struct ldc_trans_cookie *cookies, int ncookies, - unsigned int map_perm); - -extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies, - int ncookies); - -extern int ldc_copy(struct ldc_channel *lp, int copy_dir, - void *buf, unsigned int len, unsigned long offset, - struct ldc_trans_cookie *cookies, int ncookies); - -static inline int ldc_get_dring_entry(struct ldc_channel *lp, - void *buf, unsigned int len, - unsigned long offset, - struct ldc_trans_cookie *cookies, - int ncookies) -{ - return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies); -} - -static inline int ldc_put_dring_entry(struct ldc_channel *lp, - void *buf, unsigned int len, - unsigned long offset, - struct ldc_trans_cookie *cookies, - int ncookies) -{ - return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies); -} - -extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len, - struct ldc_trans_cookie *cookies, - int *ncookies, unsigned int map_perm); - -extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf, - unsigned int len, - struct ldc_trans_cookie *cookies, int ncookies); - -#endif /* _SPARC64_LDC_H */ +#include <asm-sparc/ldc.h> diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h index 6a352cbcf52..3d04981701e 100644 --- a/include/asm-sparc64/lmb.h +++ b/include/asm-sparc64/lmb.h @@ -1,10 +1 @@ -#ifndef _SPARC64_LMB_H -#define _SPARC64_LMB_H - -#include <asm/oplib.h> - -#define LMB_DBG(fmt...) prom_printf(fmt) - -#define LMB_REAL_LIMIT 0 - -#endif /* !(_SPARC64_LMB_H) */ +#include <asm-sparc/lmb.h> diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h index 7190f8de90a..4e3d8b128a5 100644 --- a/include/asm-sparc64/lsu.h +++ b/include/asm-sparc64/lsu.h @@ -1,19 +1 @@ -#ifndef _SPARC64_LSU_H -#define _SPARC64_LSU_H - -#include <linux/const.h> - -/* LSU Control Register */ -#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/ -#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/ -#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/ -#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/ -#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/ -#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/ -#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables. */ -#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable. */ -#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable. */ -#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable. */ -#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/ - -#endif /* !(_SPARC64_LSU_H) */ +#include <asm-sparc/lsu.h> diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h index 1acc7272e53..165a1934728 100644 --- a/include/asm-sparc64/mdesc.h +++ b/include/asm-sparc64/mdesc.h @@ -1,78 +1 @@ -#ifndef _SPARC64_MDESC_H -#define _SPARC64_MDESC_H - -#include <linux/types.h> -#include <linux/cpumask.h> -#include <asm/prom.h> - -struct mdesc_handle; - -/* Machine description operations are to be surrounded by grab and - * release calls. The mdesc_handle returned from the grab is - * the first argument to all of the operational calls that work - * on mdescs. - */ -extern struct mdesc_handle *mdesc_grab(void); -extern void mdesc_release(struct mdesc_handle *); - -#define MDESC_NODE_NULL (~(u64)0) - -extern u64 mdesc_node_by_name(struct mdesc_handle *handle, - u64 from_node, const char *name); -#define mdesc_for_each_node_by_name(__hdl, __node, __name) \ - for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \ - (__node) != MDESC_NODE_NULL; \ - __node = mdesc_node_by_name(__hdl, __node, __name)) - -/* Access to property values returned from mdesc_get_property() are - * only valid inside of a mdesc_grab()/mdesc_release() sequence. - * Once mdesc_release() is called, the memory backed up by these - * pointers may reference freed up memory. - * - * Therefore callers must make copies of any property values - * they need. - * - * These same rules apply to mdesc_node_name(). - */ -extern const void *mdesc_get_property(struct mdesc_handle *handle, - u64 node, const char *name, int *lenp); -extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node); - -/* MD arc iteration, the standard sequence is: - * - * unsigned long arc; - * mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) { - * unsigned long target = mdesc_arc_target(handle, arc); - * ... - * } - */ - -#define MDESC_ARC_TYPE_FWD "fwd" -#define MDESC_ARC_TYPE_BACK "back" - -extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from, - const char *arc_type); -#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \ - for (__arc = mdesc_next_arc(__hdl, __node, __type); \ - (__arc) != MDESC_NODE_NULL; \ - __arc = mdesc_next_arc(__hdl, __arc, __type)) - -extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc); - -extern void mdesc_update(void); - -struct mdesc_notifier_client { - void (*add)(struct mdesc_handle *handle, u64 node); - void (*remove)(struct mdesc_handle *handle, u64 node); - - const char *node_name; - struct mdesc_notifier_client *next; -}; - -extern void mdesc_register_notifier(struct mdesc_notifier_client *client); - -extern void mdesc_fill_in_cpu_data(cpumask_t mask); - -extern void sun4v_mdesc_init(void); - -#endif +#include <asm-sparc/mdesc.h> diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h index ebf5986c12e..43a710f7892 100644 --- a/include/asm-sparc64/mmzone.h +++ b/include/asm-sparc64/mmzone.h @@ -1,17 +1 @@ -#ifndef _SPARC64_MMZONE_H -#define _SPARC64_MMZONE_H - -#ifdef CONFIG_NEED_MULTIPLE_NODES - -extern struct pglist_data *node_data[]; - -#define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) - -extern int numa_cpu_lookup_table[]; -extern cpumask_t numa_cpumask_lookup_table[]; - -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -#endif /* _SPARC64_MMZONE_H */ +#include <asm-sparc/mmzone.h> diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h index 686defe6aaa..5f369d4df3d 100644 --- a/include/asm-sparc64/ns87303.h +++ b/include/asm-sparc64/ns87303.h @@ -1,118 +1 @@ -/* ns87303.h: Configuration Register Description for the - * National Semiconductor PC87303 (SuperIO). - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SPARC_NS87303_H -#define _SPARC_NS87303_H 1 - -/* - * Control Register Index Values - */ -#define FER 0x00 -#define FAR 0x01 -#define PTR 0x02 -#define FCR 0x03 -#define PCR 0x04 -#define KRR 0x05 -#define PMC 0x06 -#define TUP 0x07 -#define SID 0x08 -#define ASC 0x09 -#define CS0CF0 0x0a -#define CS0CF1 0x0b -#define CS1CF0 0x0c -#define CS1CF1 0x0d - -/* Function Enable Register (FER) bits */ -#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */ - -/* Function Address Register (FAR) bits */ -#define FAR_LPT_MASK 0x03 -#define FAR_LPTB 0x00 -#define FAR_LPTA 0x01 -#define FAR_LPTC 0x02 - -/* Power and Test Register (PTR) bits */ -#define PTR_LPTB_IRQ7 0x08 -#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ -#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ - /* of the parallel port */ - -/* Function Control Register (FCR) bits */ -#define FCR_LDE 0x10 /* Logical Drive Exchange */ -#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */ - -/* Printer Control Register (PCR) bits */ -#define PCR_EPP_ENABLE 0x01 -#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */ -#define PCR_ECP_ENABLE 0x04 -#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */ -#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */ - /* if 1 polarity is inverted */ -#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */ - -/* Tape UARTs and Parallel Port Config Register (TUP) bits */ -#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */ - -/* Advanced SuperIO Config Register (ASC) bits */ -#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */ -#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */ - -#define FER_RESERVED 0x00 -#define FAR_RESERVED 0x00 -#define PTR_RESERVED 0x73 -#define FCR_RESERVED 0xc4 -#define PCR_RESERVED 0x10 -#define KRR_RESERVED 0x00 -#define PMC_RESERVED 0x98 -#define TUP_RESERVED 0xfb -#define SIP_RESERVED 0x00 -#define ASC_RESERVED 0x18 -#define CS0CF0_RESERVED 0x00 -#define CS0CF1_RESERVED 0x08 -#define CS1CF0_RESERVED 0x00 -#define CS1CF1_RESERVED 0x08 - -#ifdef __KERNEL__ - -#include <linux/spinlock.h> - -#include <asm/system.h> -#include <asm/io.h> - -extern spinlock_t ns87303_lock; - -static inline int ns87303_modify(unsigned long port, unsigned int index, - unsigned char clr, unsigned char set) -{ - static unsigned char reserved[] = { - FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED, - PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED, - SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED, - CS1CF0_RESERVED, CS1CF1_RESERVED - }; - unsigned long flags; - unsigned char value; - - if (index > 0x0d) - return -EINVAL; - - spin_lock_irqsave(&ns87303_lock, flags); - - outb(index, port); - value = inb(port + 1); - value &= ~(reserved[index] | clr); - value |= set; - outb(value, port + 1); - outb(value, port + 1); - - spin_unlock_irqrestore(&ns87303_lock, flags); - - return 0; -} - -#endif /* __KERNEL__ */ - -#endif /* !(_SPARC_NS87303_H) */ +#include <asm-sparc/ns87303.h> diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h index e9555b246c8..b4e4ca812eb 100644 --- a/include/asm-sparc64/parport.h +++ b/include/asm-sparc64/parport.h @@ -1,246 +1 @@ -/* parport.h: sparc64 specific parport initialization and dma. - * - * Copyright (C) 1999 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _ASM_SPARC64_PARPORT_H -#define _ASM_SPARC64_PARPORT_H 1 - -#include <asm/ebus.h> -#include <asm/ns87303.h> -#include <asm/of_device.h> -#include <asm/prom.h> - -#define PARPORT_PC_MAX_PORTS PARPORT_MAX - -/* - * While sparc64 doesn't have an ISA DMA API, we provide something that looks - * close enough to make parport_pc happy - */ -#define HAS_DMA - -static DEFINE_SPINLOCK(dma_spin_lock); - -#define claim_dma_lock() \ -({ unsigned long flags; \ - spin_lock_irqsave(&dma_spin_lock, flags); \ - flags; \ -}) - -#define release_dma_lock(__flags) \ - spin_unlock_irqrestore(&dma_spin_lock, __flags); - -static struct sparc_ebus_info { - struct ebus_dma_info info; - unsigned int addr; - unsigned int count; - int lock; - - struct parport *port; -} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS]; - -static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS); - -static inline int request_dma(unsigned int dmanr, const char *device_id) -{ - if (dmanr >= PARPORT_PC_MAX_PORTS) - return -EINVAL; - if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0) - return -EBUSY; - return 0; -} - -static inline void free_dma(unsigned int dmanr) -{ - if (dmanr >= PARPORT_PC_MAX_PORTS) { - printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); - return; - } - if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) { - printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); - return; - } -} - -static inline void enable_dma(unsigned int dmanr) -{ - ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1); - - if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info, - sparc_ebus_dmas[dmanr].addr, - sparc_ebus_dmas[dmanr].count)) - BUG(); -} - -static inline void disable_dma(unsigned int dmanr) -{ - ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0); -} - -static inline void clear_dma_ff(unsigned int dmanr) -{ - /* nothing */ -} - -static inline void set_dma_mode(unsigned int dmanr, char mode) -{ - ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE)); -} - -static inline void set_dma_addr(unsigned int dmanr, unsigned int addr) -{ - sparc_ebus_dmas[dmanr].addr = addr; -} - -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ - sparc_ebus_dmas[dmanr].count = count; -} - -static inline unsigned int get_dma_residue(unsigned int dmanr) -{ - return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); -} - -static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match) -{ - unsigned long base = op->resource[0].start; - unsigned long config = op->resource[1].start; - unsigned long d_base = op->resource[2].start; - unsigned long d_len; - struct device_node *parent; - struct parport *p; - int slot, err; - - parent = op->node->parent; - if (!strcmp(parent->name, "dma")) { - p = parport_pc_probe_port(base, base + 0x400, - op->irqs[0], PARPORT_DMA_NOFIFO, - op->dev.parent->parent); - if (!p) - return -ENOMEM; - dev_set_drvdata(&op->dev, p); - return 0; - } - - for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) { - if (!test_and_set_bit(slot, dma_slot_map)) - break; - } - err = -ENODEV; - if (slot >= PARPORT_PC_MAX_PORTS) - goto out_err; - - spin_lock_init(&sparc_ebus_dmas[slot].info.lock); - - d_len = (op->resource[2].end - d_base) + 1UL; - sparc_ebus_dmas[slot].info.regs = - of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA"); - - if (!sparc_ebus_dmas[slot].info.regs) - goto out_clear_map; - - sparc_ebus_dmas[slot].info.flags = 0; - sparc_ebus_dmas[slot].info.callback = NULL; - sparc_ebus_dmas[slot].info.client_cookie = NULL; - sparc_ebus_dmas[slot].info.irq = 0xdeadbeef; - strcpy(sparc_ebus_dmas[slot].info.name, "parport"); - if (ebus_dma_register(&sparc_ebus_dmas[slot].info)) - goto out_unmap_regs; - - ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1); - - /* Configure IRQ to Push Pull, Level Low */ - /* Enable ECP, set bit 2 of the CTR first */ - outb(0x04, base + 0x02); - ns87303_modify(config, PCR, - PCR_EPP_ENABLE | - PCR_IRQ_ODRAIN, - PCR_ECP_ENABLE | - PCR_ECP_CLK_ENA | - PCR_IRQ_POLAR); - - /* CTR bit 5 controls direction of port */ - ns87303_modify(config, PTR, - 0, PTR_LPT_REG_DIR); - - p = parport_pc_probe_port(base, base + 0x400, - op->irqs[0], - slot, - op->dev.parent); - err = -ENOMEM; - if (!p) - goto out_disable_irq; - - dev_set_drvdata(&op->dev, p); - - return 0; - -out_disable_irq: - ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); - ebus_dma_unregister(&sparc_ebus_dmas[slot].info); - -out_unmap_regs: - of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len); - -out_clear_map: - clear_bit(slot, dma_slot_map); - -out_err: - return err; -} - -static int __devexit ecpp_remove(struct of_device *op) -{ - struct parport *p = dev_get_drvdata(&op->dev); - int slot = p->dma; - - parport_pc_unregister_port(p); - - if (slot != PARPORT_DMA_NOFIFO) { - unsigned long d_base = op->resource[2].start; - unsigned long d_len; - - d_len = (op->resource[2].end - d_base) + 1UL; - - ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); - ebus_dma_unregister(&sparc_ebus_dmas[slot].info); - of_iounmap(&op->resource[2], - sparc_ebus_dmas[slot].info.regs, - d_len); - clear_bit(slot, dma_slot_map); - } - - return 0; -} - -static struct of_device_id ecpp_match[] = { - { - .name = "ecpp", - }, - { - .name = "parallel", - .compatible = "ecpp", - }, - { - .name = "parallel", - .compatible = "ns87317-ecpp", - }, - {}, -}; - -static struct of_platform_driver ecpp_driver = { - .name = "ecpp", - .match_table = ecpp_match, - .probe = ecpp_probe, - .remove = __devexit_p(ecpp_remove), -}; - -static int parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - of_register_driver(&ecpp_driver, &of_bus_type); - - return 0; -} - -#endif /* !(_ASM_SPARC64_PARPORT_H */ +#include <asm-sparc/parport.h> diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h index eaac842d88c..d805f33f1e0 100644 --- a/include/asm-sparc64/pil.h +++ b/include/asm-sparc64/pil.h @@ -1,21 +1 @@ -#ifndef _SPARC64_PIL_H -#define _SPARC64_PIL_H - -/* To avoid some locking problems, we hard allocate certain PILs - * for SMP cross call messages that must do a etrap/rtrap. - * - * A local_irq_disable() does not block the cross call delivery, so - * when SMP locking is an issue we reschedule the event into a PIL - * interrupt which is blocked by local_irq_disable(). - * - * In fact any XCALL which has to etrap/rtrap has a problem because - * it is difficult to prevent rtrap from running BH's, and that would - * need to be done if the XCALL arrived while %pil==15. - */ -#define PIL_SMP_CALL_FUNC 1 -#define PIL_SMP_RECEIVE_SIGNAL 2 -#define PIL_SMP_CAPTURE 3 -#define PIL_SMP_CTX_NEW_VERSION 4 -#define PIL_DEVICE_IRQ 5 - -#endif /* !(_SPARC64_PIL_H) */ +#include <asm-sparc/pil.h> diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h index 3f3f43f5be5..0d72eb811cc 100644 --- a/include/asm-sparc64/reboot.h +++ b/include/asm-sparc64/reboot.h @@ -1,6 +1 @@ -#ifndef _SPARC64_REBOOT_H -#define _SPARC64_REBOOT_H - -extern void machine_alt_power_off(void); - -#endif /* _SPARC64_REBOOT_H */ +#include <asm-sparc/reboot.h> diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h index a303c9d64d8..2a1de315c86 100644 --- a/include/asm-sparc64/rwsem-const.h +++ b/include/asm-sparc64/rwsem-const.h @@ -1,12 +1 @@ -/* rwsem-const.h: RW semaphore counter constants. */ -#ifndef _SPARC64_RWSEM_CONST_H -#define _SPARC64_RWSEM_CONST_H - -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS 0xffff0000 -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - -#endif /* _SPARC64_RWSEM_CONST_H */ +#include <asm-sparc/rwsem-const.h> diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h index 1dc129ac2fe..6943c56ed08 100644 --- a/include/asm-sparc64/rwsem.h +++ b/include/asm-sparc64/rwsem.h @@ -1,84 +1 @@ -/* - * rwsem.h: R/W semaphores implemented using CAS - * - * Written by David S. Miller (davem@redhat.com), 2001. - * Derived from asm-i386/rwsem.h - */ -#ifndef _SPARC64_RWSEM_H -#define _SPARC64_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" -#endif - -#ifdef __KERNEL__ - -#include <linux/list.h> -#include <linux/spinlock.h> -#include <asm/rwsem-const.h> - -struct rwsem_waiter; - -struct rw_semaphore { - signed int count; - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - -extern void __down_read(struct rw_semaphore *sem); -extern int __down_read_trylock(struct rw_semaphore *sem); -extern void __down_write(struct rw_semaphore *sem); -extern int __down_write_trylock(struct rw_semaphore *sem); -extern void __up_read(struct rw_semaphore *sem); -extern void __up_write(struct rw_semaphore *sem); -extern void __downgrade_write(struct rw_semaphore *sem); - -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - __down_write(sem); -} - -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ - -#endif /* _SPARC64_RWSEM_H */ +#include <asm-sparc/rwsem.h> diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h index 5e8b01fb334..23675f6a915 100644 --- a/include/asm-sparc64/scratchpad.h +++ b/include/asm-sparc64/scratchpad.h @@ -1,14 +1 @@ -#ifndef _SPARC64_SCRATCHPAD_H -#define _SPARC64_SCRATCHPAD_H - -/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD. */ - -#define SCRATCHPAD_MMU_MISS 0x00 /* Shared with OBP - set by OBP */ -#define SCRATCHPAD_CPUID 0x08 /* Shared with OBP - set by hypervisor */ -#define SCRATCHPAD_UTSBREG1 0x10 -#define SCRATCHPAD_UTSBREG2 0x18 - /* 0x20 and 0x28, hypervisor only... */ -#define SCRATCHPAD_UNUSED1 0x30 -#define SCRATCHPAD_UNUSED2 0x38 /* Reserved for OBP */ - -#endif /* !(_SPARC64_SCRATCHPAD_H) */ +#include <asm-sparc/scratchpad.h> diff --git a/include/asm-sparc64/seccomp.h b/include/asm-sparc64/seccomp.h index 7fcd9968192..f22f02a08a6 100644 --- a/include/asm-sparc64/seccomp.h +++ b/include/asm-sparc64/seccomp.h @@ -1,21 +1 @@ -#ifndef _ASM_SECCOMP_H - -#include <linux/thread_info.h> /* already defines TIF_32BIT */ - -#ifndef TIF_32BIT -#error "unexpected TIF_32BIT on sparc64" -#endif - -#include <linux/unistd.h> - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#define __NR_seccomp_read_32 __NR_read -#define __NR_seccomp_write_32 __NR_write -#define __NR_seccomp_exit_32 __NR_exit -#define __NR_seccomp_sigreturn_32 __NR_sigreturn - -#endif /* _ASM_SECCOMP_H */ +#include <asm-sparc/seccomp.h> diff --git a/include/asm-sparc64/sfafsr.h b/include/asm-sparc64/sfafsr.h index e96137b04a4..8036fc377a4 100644 --- a/include/asm-sparc64/sfafsr.h +++ b/include/asm-sparc64/sfafsr.h @@ -1,82 +1 @@ -#ifndef _SPARC64_SFAFSR_H -#define _SPARC64_SFAFSR_H - -#include <linux/const.h> - -/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ - -#define SFAFSR_ME (_AC(1,UL) << SFAFSR_ME_SHIFT) -#define SFAFSR_ME_SHIFT 32 -#define SFAFSR_PRIV (_AC(1,UL) << SFAFSR_PRIV_SHIFT) -#define SFAFSR_PRIV_SHIFT 31 -#define SFAFSR_ISAP (_AC(1,UL) << SFAFSR_ISAP_SHIFT) -#define SFAFSR_ISAP_SHIFT 30 -#define SFAFSR_ETP (_AC(1,UL) << SFAFSR_ETP_SHIFT) -#define SFAFSR_ETP_SHIFT 29 -#define SFAFSR_IVUE (_AC(1,UL) << SFAFSR_IVUE_SHIFT) -#define SFAFSR_IVUE_SHIFT 28 -#define SFAFSR_TO (_AC(1,UL) << SFAFSR_TO_SHIFT) -#define SFAFSR_TO_SHIFT 27 -#define SFAFSR_BERR (_AC(1,UL) << SFAFSR_BERR_SHIFT) -#define SFAFSR_BERR_SHIFT 26 -#define SFAFSR_LDP (_AC(1,UL) << SFAFSR_LDP_SHIFT) -#define SFAFSR_LDP_SHIFT 25 -#define SFAFSR_CP (_AC(1,UL) << SFAFSR_CP_SHIFT) -#define SFAFSR_CP_SHIFT 24 -#define SFAFSR_WP (_AC(1,UL) << SFAFSR_WP_SHIFT) -#define SFAFSR_WP_SHIFT 23 -#define SFAFSR_EDP (_AC(1,UL) << SFAFSR_EDP_SHIFT) -#define SFAFSR_EDP_SHIFT 22 -#define SFAFSR_UE (_AC(1,UL) << SFAFSR_UE_SHIFT) -#define SFAFSR_UE_SHIFT 21 -#define SFAFSR_CE (_AC(1,UL) << SFAFSR_CE_SHIFT) -#define SFAFSR_CE_SHIFT 20 -#define SFAFSR_ETS (_AC(0xf,UL) << SFAFSR_ETS_SHIFT) -#define SFAFSR_ETS_SHIFT 16 -#define SFAFSR_PSYND (_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT) -#define SFAFSR_PSYND_SHIFT 0 - -/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read - * ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write - */ - -#define UDBE_UE (_AC(1,UL) << 9) -#define UDBE_CE (_AC(1,UL) << 8) -#define UDBE_E_SYNDR (_AC(0xff,UL) << 0) - -/* The trap handlers for asynchronous errors encode the AFSR and - * other pieces of information into a 64-bit argument for C code - * encoded as follows: - * - * ----------------------------------------------- - * | UDB_H | UDB_L | TL>1 | TT | AFSR | - * ----------------------------------------------- - * 63 54 53 44 42 41 33 32 0 - * - * The AFAR is passed in unchanged. - */ -#define SFSTAT_UDBH_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) -#define SFSTAT_UDBH_SHIFT 54 -#define SFSTAT_UDBL_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) -#define SFSTAT_UDBL_SHIFT 44 -#define SFSTAT_TL_GT_ONE (_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT) -#define SFSTAT_TL_GT_ONE_SHIFT 42 -#define SFSTAT_TRAP_TYPE (_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT) -#define SFSTAT_TRAP_TYPE_SHIFT 33 -#define SFSTAT_AFSR_MASK (_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT) -#define SFSTAT_AFSR_SHIFT 0 - -/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */ -#define ESTATE_ERR_CE 0x1 /* Correctable errors */ -#define ESTATE_ERR_NCE 0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */ -#define ESTATE_ERR_ISAP 0x4 /* System address parity error */ -#define ESTATE_ERR_ALL (ESTATE_ERR_CE | \ - ESTATE_ERR_NCE | \ - ESTATE_ERR_ISAP) - -/* The various trap types that report using the above state. */ -#define TRAP_TYPE_IAE 0x09 /* Instruction Access Error */ -#define TRAP_TYPE_DAE 0x32 /* Data Access Error */ -#define TRAP_TYPE_CEE 0x63 /* Correctable ECC Error */ - -#endif /* _SPARC64_SFAFSR_H */ +#include <asm-sparc/sfafsr.h> diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h index b99d4e4b6d2..e681f22a97a 100644 --- a/include/asm-sparc64/sparsemem.h +++ b/include/asm-sparc64/sparsemem.h @@ -1,12 +1 @@ -#ifndef _SPARC64_SPARSEMEM_H -#define _SPARC64_SPARSEMEM_H - -#ifdef __KERNEL__ - -#define SECTION_SIZE_BITS 30 -#define MAX_PHYSADDR_BITS 42 -#define MAX_PHYSMEM_BITS 42 - -#endif /* !(__KERNEL__) */ - -#endif /* !(_SPARC64_SPARSEMEM_H) */ +#include <asm-sparc/sparsemem.h> diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h index 985ea7e3199..4430d2fbb0d 100644 --- a/include/asm-sparc64/spitfire.h +++ b/include/asm-sparc64/spitfire.h @@ -1,342 +1 @@ -/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ - -#ifndef _SPARC64_SPITFIRE_H -#define _SPARC64_SPITFIRE_H - -#include <asm/asi.h> - -/* The following register addresses are accessible via ASI_DMMU - * and ASI_IMMU, that is there is a distinct and unique copy of - * each these registers for each TLB. - */ -#define TSB_TAG_TARGET 0x0000000000000000 /* All chips */ -#define TLB_SFSR 0x0000000000000018 /* All chips */ -#define TSB_REG 0x0000000000000028 /* All chips */ -#define TLB_TAG_ACCESS 0x0000000000000030 /* All chips */ -#define VIRT_WATCHPOINT 0x0000000000000038 /* All chips */ -#define PHYS_WATCHPOINT 0x0000000000000040 /* All chips */ -#define TSB_EXTENSION_P 0x0000000000000048 /* Ultra-III and later */ -#define TSB_EXTENSION_S 0x0000000000000050 /* Ultra-III and later, D-TLB only */ -#define TSB_EXTENSION_N 0x0000000000000058 /* Ultra-III and later */ -#define TLB_TAG_ACCESS_EXT 0x0000000000000060 /* Ultra-III+ and later */ - -/* These registers only exist as one entity, and are accessed - * via ASI_DMMU only. - */ -#define PRIMARY_CONTEXT 0x0000000000000008 -#define SECONDARY_CONTEXT 0x0000000000000010 -#define DMMU_SFAR 0x0000000000000020 -#define VIRT_WATCHPOINT 0x0000000000000038 -#define PHYS_WATCHPOINT 0x0000000000000040 - -#define SPITFIRE_HIGHEST_LOCKED_TLBENT (64 - 1) -#define CHEETAH_HIGHEST_LOCKED_TLBENT (16 - 1) - -#define L1DCACHE_SIZE 0x4000 - -#define SUN4V_CHIP_INVALID 0x00 -#define SUN4V_CHIP_NIAGARA1 0x01 -#define SUN4V_CHIP_NIAGARA2 0x02 -#define SUN4V_CHIP_UNKNOWN 0xff - -#ifndef __ASSEMBLY__ - -enum ultra_tlb_layout { - spitfire = 0, - cheetah = 1, - cheetah_plus = 2, - hypervisor = 3, -}; - -extern enum ultra_tlb_layout tlb_type; - -extern int sun4v_chip_type; - -extern int cheetah_pcache_forced_on; -extern void cheetah_enable_pcache(void); - -#define sparc64_highest_locked_tlbent() \ - (tlb_type == spitfire ? \ - SPITFIRE_HIGHEST_LOCKED_TLBENT : \ - CHEETAH_HIGHEST_LOCKED_TLBENT) - -extern int num_kernel_image_mappings; - -/* The data cache is write through, so this just invalidates the - * specified line. - */ -static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG)); -} - -/* The instruction cache lines are flushed with this, but note that - * this does not flush the pipeline. It is possible for a line to - * get flushed but stale instructions to still be in the pipeline, - * a flush instruction (to any address) is sufficient to handle - * this issue after the line is invalidated. - */ -static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (tag), "r" (addr), "i" (ASI_IC_TAG)); -} - -static inline unsigned long spitfire_get_dtlb_data(int entry) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (data) - : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS)); - - /* Clear TTE diag bits. */ - data &= ~0x0003fe0000000000UL; - - return data; -} - -static inline unsigned long spitfire_get_dtlb_tag(int entry) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ)); - return tag; -} - -static inline void spitfire_put_dtlb_data(int entry, unsigned long data) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), "r" (entry << 3), - "i" (ASI_DTLB_DATA_ACCESS)); -} - -static inline unsigned long spitfire_get_itlb_data(int entry) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (data) - : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS)); - - /* Clear TTE diag bits. */ - data &= ~0x0003fe0000000000UL; - - return data; -} - -static inline unsigned long spitfire_get_itlb_tag(int entry) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ)); - return tag; -} - -static inline void spitfire_put_itlb_data(int entry, unsigned long data) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), "r" (entry << 3), - "i" (ASI_ITLB_DATA_ACCESS)); -} - -static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page) -{ - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP)); -} - -static inline void spitfire_flush_itlb_nucleus_page(unsigned long page) -{ - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP)); -} - -/* Cheetah has "all non-locked" tlb flushes. */ -static inline void cheetah_flush_dtlb_all(void) -{ - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (0x80), "i" (ASI_DMMU_DEMAP)); -} - -static inline void cheetah_flush_itlb_all(void) -{ - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (0x80), "i" (ASI_IMMU_DEMAP)); -} - -/* Cheetah has a 4-tlb layout so direct access is a bit different. - * The first two TLBs are fully assosciative, hold 16 entries, and are - * used only for locked and >8K sized translations. One exists for - * data accesses and one for instruction accesses. - * - * The third TLB is for data accesses to 8K non-locked translations, is - * 2 way assosciative, and holds 512 entries. The fourth TLB is for - * instruction accesses to 8K non-locked translations, is 2 way - * assosciative, and holds 128 entries. - * - * Cheetah has some bug where bogus data can be returned from - * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes - * the problem for me. -DaveM - */ -static inline unsigned long cheetah_get_ldtlb_data(int entry) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" - "ldxa [%1] %2, %0" - : "=r" (data) - : "r" ((0 << 16) | (entry << 3)), - "i" (ASI_DTLB_DATA_ACCESS)); - - return data; -} - -static inline unsigned long cheetah_get_litlb_data(int entry) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" - "ldxa [%1] %2, %0" - : "=r" (data) - : "r" ((0 << 16) | (entry << 3)), - "i" (ASI_ITLB_DATA_ACCESS)); - - return data; -} - -static inline unsigned long cheetah_get_ldtlb_tag(int entry) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" ((0 << 16) | (entry << 3)), - "i" (ASI_DTLB_TAG_READ)); - - return tag; -} - -static inline unsigned long cheetah_get_litlb_tag(int entry) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" ((0 << 16) | (entry << 3)), - "i" (ASI_ITLB_TAG_READ)); - - return tag; -} - -static inline void cheetah_put_ldtlb_data(int entry, unsigned long data) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), - "r" ((0 << 16) | (entry << 3)), - "i" (ASI_DTLB_DATA_ACCESS)); -} - -static inline void cheetah_put_litlb_data(int entry, unsigned long data) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), - "r" ((0 << 16) | (entry << 3)), - "i" (ASI_ITLB_DATA_ACCESS)); -} - -static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" - "ldxa [%1] %2, %0" - : "=r" (data) - : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS)); - - return data; -} - -static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ)); - return tag; -} - -static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), - "r" ((tlb << 16) | (entry << 3)), - "i" (ASI_DTLB_DATA_ACCESS)); -} - -static inline unsigned long cheetah_get_itlb_data(int entry) -{ - unsigned long data; - - __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" - "ldxa [%1] %2, %0" - : "=r" (data) - : "r" ((2 << 16) | (entry << 3)), - "i" (ASI_ITLB_DATA_ACCESS)); - - return data; -} - -static inline unsigned long cheetah_get_itlb_tag(int entry) -{ - unsigned long tag; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (tag) - : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ)); - return tag; -} - -static inline void cheetah_put_itlb_data(int entry, unsigned long data) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* No outputs */ - : "r" (data), "r" ((2 << 16) | (entry << 3)), - "i" (ASI_ITLB_DATA_ACCESS)); -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC64_SPITFIRE_H) */ +#include <asm-sparc/spitfire.h> diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h index a7c35dbcb28..97720ce2fd4 100644 --- a/include/asm-sparc64/sstate.h +++ b/include/asm-sparc64/sstate.h @@ -1,13 +1 @@ -#ifndef _SPARC64_SSTATE_H -#define _SPARC64_SSTATE_H - -extern void sstate_booting(void); -extern void sstate_running(void); -extern void sstate_halt(void); -extern void sstate_poweroff(void); -extern void sstate_panic(void); -extern void sstate_reboot(void); - -extern void sun4v_sstate_init(void); - -#endif /* _SPARC64_SSTATE_H */ +#include <asm-sparc/sstate.h> diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h index 6cee39adf6d..adc9b92c0ef 100644 --- a/include/asm-sparc64/stacktrace.h +++ b/include/asm-sparc64/stacktrace.h @@ -1,6 +1 @@ -#ifndef _SPARC64_STACKTRACE_H -#define _SPARC64_STACKTRACE_H - -extern void stack_trace_flush(void); - -#endif /* _SPARC64_STACKTRACE_H */ +#include <asm-sparc/stacktrace.h> diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h index 07bafd31e33..db97daa3bed 100644 --- a/include/asm-sparc64/starfire.h +++ b/include/asm-sparc64/starfire.h @@ -1,21 +1 @@ -/* - * starfire.h: Group all starfire specific code together. - * - * Copyright (C) 2000 Anton Blanchard (anton@samba.org) - */ - -#ifndef _SPARC64_STARFIRE_H -#define _SPARC64_STARFIRE_H - -#ifndef __ASSEMBLY__ - -extern int this_is_starfire; - -extern void check_if_starfire(void); -extern void starfire_cpu_setup(void); -extern int starfire_hard_smp_processor_id(void); -extern void starfire_hookup(int); -extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid); - -#endif -#endif +#include <asm-sparc/starfire.h> diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h index 45a43f637a1..3477b16e30c 100644 --- a/include/asm-sparc64/syscalls.h +++ b/include/asm-sparc64/syscalls.h @@ -1,13 +1 @@ -#ifndef _SPARC64_SYSCALLS_H -#define _SPARC64_SYSCALLS_H - -struct pt_regs; - -extern asmlinkage long sparc_do_fork(unsigned long clone_flags, - unsigned long stack_start, - struct pt_regs *regs, - unsigned long stack_size); - -extern asmlinkage int sparc_execve(struct pt_regs *regs); - -#endif /* _SPARC64_SYSCALLS_H */ +#include <asm-sparc/syscalls.h> diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h index 76e4299dd9b..3677a302ea3 100644 --- a/include/asm-sparc64/tsb.h +++ b/include/asm-sparc64/tsb.h @@ -1,283 +1 @@ -#ifndef _SPARC64_TSB_H -#define _SPARC64_TSB_H - -/* The sparc64 TSB is similar to the powerpc hashtables. It's a - * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes - * pointers into this table for 8K and 64K page sizes, and also a - * comparison TAG based upon the virtual address and context which - * faults. - * - * TLB miss trap handler software does the actual lookup via something - * of the form: - * - * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1 - * ldxa [%g0] ASI_{D,I}MMU, %g6 - * sllx %g6, 22, %g6 - * srlx %g6, 22, %g6 - * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 - * cmp %g4, %g6 - * bne,pn %xcc, tsb_miss_{d,i}tlb - * mov FAULT_CODE_{D,I}TLB, %g3 - * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN - * retry - * - * - * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte - * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu - * register which is: - * - * ------------------------------------------------- - * | - | CONTEXT | - | VADDR bits 63:22 | - * ------------------------------------------------- - * 63 61 60 48 47 42 41 0 - * - * But actually, since we use per-mm TSB's, we zero out the CONTEXT - * field. - * - * Like the powerpc hashtables we need to use locking in order to - * synchronize while we update the entries. PTE updates need locking - * as well. - * - * We need to carefully choose a lock bits for the TSB entry. We - * choose to use bit 47 in the tag. Also, since we never map anything - * at page zero in context zero, we use zero as an invalid tag entry. - * When the lock bit is set, this forces a tag comparison failure. - */ - -#define TSB_TAG_LOCK_BIT 47 -#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32)) - -#define TSB_TAG_INVALID_BIT 46 -#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32)) - -#define TSB_MEMBAR membar #StoreStore - -/* Some cpus support physical address quad loads. We want to use - * those if possible so we don't need to hard-lock the TSB mapping - * into the TLB. We encode some instruction patching in order to - * support this. - * - * The kernel TSB is locked into the TLB by virtue of being in the - * kernel image, so we don't play these games for swapper_tsb access. - */ -#ifndef __ASSEMBLY__ -struct tsb_ldquad_phys_patch_entry { - unsigned int addr; - unsigned int sun4u_insn; - unsigned int sun4v_insn; -}; -extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch, - __tsb_ldquad_phys_patch_end; - -struct tsb_phys_patch_entry { - unsigned int addr; - unsigned int insn; -}; -extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; -#endif -#define TSB_LOAD_QUAD(TSB, REG) \ -661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \ - .section .tsb_ldquad_phys_patch, "ax"; \ - .word 661b; \ - ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \ - ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \ - .previous - -#define TSB_LOAD_TAG_HIGH(TSB, REG) \ -661: lduwa [TSB] ASI_N, REG; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - lduwa [TSB] ASI_PHYS_USE_EC, REG; \ - .previous - -#define TSB_LOAD_TAG(TSB, REG) \ -661: ldxa [TSB] ASI_N, REG; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - ldxa [TSB] ASI_PHYS_USE_EC, REG; \ - .previous - -#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \ -661: casa [TSB] ASI_N, REG1, REG2; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ - .previous - -#define TSB_CAS_TAG(TSB, REG1, REG2) \ -661: casxa [TSB] ASI_N, REG1, REG2; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ - .previous - -#define TSB_STORE(ADDR, VAL) \ -661: stxa VAL, [ADDR] ASI_N; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - stxa VAL, [ADDR] ASI_PHYS_USE_EC; \ - .previous - -#define TSB_LOCK_TAG(TSB, REG1, REG2) \ -99: TSB_LOAD_TAG_HIGH(TSB, REG1); \ - sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ - andcc REG1, REG2, %g0; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \ - cmp REG1, REG2; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_MEMBAR - -#define TSB_WRITE(TSB, TTE, TAG) \ - add TSB, 0x8, TSB; \ - TSB_STORE(TSB, TTE); \ - sub TSB, 0x8, TSB; \ - TSB_MEMBAR; \ - TSB_STORE(TSB, TAG); - -#define KTSB_LOAD_QUAD(TSB, REG) \ - ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; - -#define KTSB_STORE(ADDR, VAL) \ - stxa VAL, [ADDR] ASI_N; - -#define KTSB_LOCK_TAG(TSB, REG1, REG2) \ -99: lduwa [TSB] ASI_N, REG1; \ - sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ - andcc REG1, REG2, %g0; \ - bne,pn %icc, 99b; \ - nop; \ - casa [TSB] ASI_N, REG1, REG2;\ - cmp REG1, REG2; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_MEMBAR - -#define KTSB_WRITE(TSB, TTE, TAG) \ - add TSB, 0x8, TSB; \ - stxa TTE, [TSB] ASI_N; \ - sub TSB, 0x8, TSB; \ - TSB_MEMBAR; \ - stxa TAG, [TSB] ASI_N; - - /* Do a kernel page table walk. Leaves physical PTE pointer in - * REG1. Jumps to FAIL_LABEL on early page table walk termination. - * VADDR will not be clobbered, but REG2 will. - */ -#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \ - sethi %hi(swapper_pg_dir), REG1; \ - or REG1, %lo(swapper_pg_dir), REG1; \ - sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - andn REG2, 0x3, REG2; \ - lduw [REG1 + REG2], REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x3, REG2; \ - lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - PMD_SHIFT, REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x7, REG2; \ - add REG1, REG2, REG1; - - /* Do a user page table walk in MMU globals. Leaves physical PTE - * pointer in REG1. Jumps to FAIL_LABEL on early page table walk - * termination. Physical base of page tables is in PHYS_PGD which - * will not be modified. - * - * VADDR will not be clobbered, but REG1 and REG2 will. - */ -#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \ - sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - andn REG2, 0x3, REG2; \ - lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x3, REG2; \ - lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - PMD_SHIFT, REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x7, REG2; \ - add REG1, REG2, REG1; - -/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0. - * If no entry is found, FAIL_LABEL will be branched to. On success - * the resulting PTE value will be left in REG1. VADDR is preserved - * by this routine. - */ -#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \ - sethi %hi(prom_trans), REG1; \ - or REG1, %lo(prom_trans), REG1; \ -97: ldx [REG1 + 0x00], REG2; \ - brz,pn REG2, FAIL_LABEL; \ - nop; \ - ldx [REG1 + 0x08], REG3; \ - add REG2, REG3, REG3; \ - cmp REG2, VADDR; \ - bgu,pt %xcc, 98f; \ - cmp VADDR, REG3; \ - bgeu,pt %xcc, 98f; \ - ldx [REG1 + 0x10], REG3; \ - sub VADDR, REG2, REG2; \ - ba,pt %xcc, 99f; \ - add REG3, REG2, REG1; \ -98: ba,pt %xcc, 97b; \ - add REG1, (3 * 8), REG1; \ -99: - - /* We use a 32K TSB for the whole kernel, this allows to - * handle about 16MB of modules and vmalloc mappings without - * incurring many hash conflicts. - */ -#define KERNEL_TSB_SIZE_BYTES (32 * 1024) -#define KERNEL_TSB_NENTRIES \ - (KERNEL_TSB_SIZE_BYTES / 16) -#define KERNEL_TSB4M_NENTRIES 4096 - - /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL - * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries - * and the found TTE will be left in REG1. REG3 and REG4 must - * be an even/odd pair of registers. - * - * VADDR and TAG will be preserved and not clobbered by this macro. - */ -#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ - sethi %hi(swapper_tsb), REG1; \ - or REG1, %lo(swapper_tsb), REG1; \ - srlx VADDR, PAGE_SHIFT, REG2; \ - and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \ - sllx REG2, 4, REG2; \ - add REG1, REG2, REG2; \ - KTSB_LOAD_QUAD(REG2, REG3); \ - cmp REG3, TAG; \ - be,a,pt %xcc, OK_LABEL; \ - mov REG4, REG1; - -#ifndef CONFIG_DEBUG_PAGEALLOC - /* This version uses a trick, the TAG is already (VADDR >> 22) so - * we can make use of that for the index computation. - */ -#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ - sethi %hi(swapper_4m_tsb), REG1; \ - or REG1, %lo(swapper_4m_tsb), REG1; \ - and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \ - sllx REG2, 4, REG2; \ - add REG1, REG2, REG2; \ - KTSB_LOAD_QUAD(REG2, REG3); \ - cmp REG3, TAG; \ - be,a,pt %xcc, OK_LABEL; \ - mov REG4, REG1; -#endif - -#endif /* !(_SPARC64_TSB_H) */ +#include <asm-sparc/tsb.h> diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index 0ba199587e0..a550f1bf6f9 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -1,658 +1 @@ -#ifndef _SPARC64_TTABLE_H -#define _SPARC64_TTABLE_H - -#include <asm/utrap.h> - -#ifdef __ASSEMBLY__ -#include <asm/thread_info.h> -#endif - -#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop; - -/* We need a "cleaned" instruction... */ -#define CLEAN_WINDOW \ - rdpr %cleanwin, %l0; add %l0, 1, %l0; \ - wrpr %l0, 0x0, %cleanwin; \ - clr %o0; clr %o1; clr %o2; clr %o3; \ - clr %o4; clr %o5; clr %o6; clr %o7; \ - clr %l0; clr %l1; clr %l2; clr %l3; \ - clr %l4; clr %l5; clr %l6; clr %l7; \ - retry; \ - nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop; - -#define TRAP(routine) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap; \ -109: or %g7, %lo(109b), %g7; \ - call routine; \ - add %sp, PTREGS_OFF, %o0; \ - ba,pt %xcc, rtrap; \ - nop; \ - nop; - -#define TRAP_7INSNS(routine) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap; \ -109: or %g7, %lo(109b), %g7; \ - call routine; \ - add %sp, PTREGS_OFF, %o0; \ - ba,pt %xcc, rtrap; \ - nop; - -#define TRAP_SAVEFPU(routine) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, do_fptrap; \ -109: or %g7, %lo(109b), %g7; \ - call routine; \ - add %sp, PTREGS_OFF, %o0; \ - ba,pt %xcc, rtrap; \ - nop; \ - nop; - -#define TRAP_NOSAVE(routine) \ - ba,pt %xcc, routine; \ - nop; \ - nop; nop; nop; nop; nop; nop; - -#define TRAP_NOSAVE_7INSNS(routine) \ - ba,pt %xcc, routine; \ - nop; \ - nop; nop; nop; nop; nop; - -#define TRAPTL1(routine) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etraptl1; \ -109: or %g7, %lo(109b), %g7; \ - call routine; \ - add %sp, PTREGS_OFF, %o0; \ - ba,pt %xcc, rtrap; \ - nop; \ - nop; - -#define TRAP_ARG(routine, arg) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap; \ -109: or %g7, %lo(109b), %g7; \ - add %sp, PTREGS_OFF, %o0; \ - call routine; \ - mov arg, %o1; \ - ba,pt %xcc, rtrap; \ - nop; - -#define TRAPTL1_ARG(routine, arg) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etraptl1; \ -109: or %g7, %lo(109b), %g7; \ - add %sp, PTREGS_OFF, %o0; \ - call routine; \ - mov arg, %o1; \ - ba,pt %xcc, rtrap; \ - nop; - -#define SYSCALL_TRAP(routine, systbl) \ - rdpr %pil, %g2; \ - mov TSTATE_SYSCALL, %g3; \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap_syscall; \ -109: or %g7, %lo(109b), %g7; \ - sethi %hi(systbl), %l7; \ - ba,pt %xcc, routine; \ - or %l7, %lo(systbl), %l7; - -#define TRAP_UTRAP(handler,lvl) \ - mov handler, %g3; \ - ba,pt %xcc, utrap_trap; \ - mov lvl, %g4; \ - nop; \ - nop; \ - nop; \ - nop; \ - nop; - -#ifdef CONFIG_COMPAT -#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32) -#else -#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110) -#endif -#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64) -#define GETCC_TRAP TRAP(getcc) -#define SETCC_TRAP TRAP(setcc) -#define BREAKPOINT_TRAP TRAP(breakpoint_trap) - -#ifdef CONFIG_TRACE_IRQFLAGS - -#define TRAP_IRQ(routine, level) \ - rdpr %pil, %g2; \ - wrpr %g0, 15, %pil; \ - sethi %hi(1f-4), %g7; \ - ba,pt %xcc, etrap_irq; \ - or %g7, %lo(1f-4), %g7; \ - nop; \ - nop; \ - nop; \ - .subsection 2; \ -1: call trace_hardirqs_off; \ - nop; \ - mov level, %o0; \ - call routine; \ - add %sp, PTREGS_OFF, %o1; \ - ba,a,pt %xcc, rtrap_irq; \ - .previous; - -#else - -#define TRAP_IRQ(routine, level) \ - rdpr %pil, %g2; \ - wrpr %g0, 15, %pil; \ - ba,pt %xcc, etrap_irq; \ - rd %pc, %g7; \ - mov level, %o0; \ - call routine; \ - add %sp, PTREGS_OFF, %o1; \ - ba,a,pt %xcc, rtrap_irq; - -#endif - -#define TRAP_IVEC TRAP_NOSAVE(do_ivec) - -#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl) - -#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl) - -#define FLUSH_WINDOW_TRAP \ - ba,pt %xcc, etrap; \ - rd %pc, %g7; \ - flushw; \ - ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \ - add %l1, 4, %l2; \ - stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \ - ba,pt %xcc, rtrap; \ - stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]; - -#ifdef CONFIG_KPROBES -#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl) -#else -#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl) -#endif - -#ifdef CONFIG_KGDB -#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl) -#else -#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl) -#endif - -#define SUN4V_ITSB_MISS \ - ldxa [%g0] ASI_SCRATCHPAD, %g2; \ - ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \ - ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \ - srlx %g4, 22, %g6; \ - ba,pt %xcc, sun4v_itsb_miss; \ - nop; \ - nop; \ - nop; - -#define SUN4V_DTSB_MISS \ - ldxa [%g0] ASI_SCRATCHPAD, %g2; \ - ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \ - ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \ - srlx %g4, 22, %g6; \ - ba,pt %xcc, sun4v_dtsb_miss; \ - nop; \ - nop; \ - nop; - -/* Before touching these macros, you owe it to yourself to go and - * see how arch/sparc64/kernel/winfixup.S works... -DaveM - * - * For the user cases we used to use the %asi register, but - * it turns out that the "wr xxx, %asi" costs ~5 cycles, so - * now we use immediate ASI loads and stores instead. Kudos - * to Greg Onufer for pointing out this performance anomaly. - * - * Further note that we cannot use the g2, g4, g5, and g7 alternate - * globals in the spill routines, check out the save instruction in - * arch/sparc64/kernel/etrap.S to see what I mean about g2, and - * g4/g5 are the globals which are preserved by etrap processing - * for the caller of it. The g7 register is the return pc for - * etrap. Finally, g6 is the current thread register so we cannot - * us it in the spill handlers either. Most of these rules do not - * apply to fill processing, only g6 is not usable. - */ - -/* Normal kernel spill */ -#define SPILL_0_NORMAL \ - stx %l0, [%sp + STACK_BIAS + 0x00]; \ - stx %l1, [%sp + STACK_BIAS + 0x08]; \ - stx %l2, [%sp + STACK_BIAS + 0x10]; \ - stx %l3, [%sp + STACK_BIAS + 0x18]; \ - stx %l4, [%sp + STACK_BIAS + 0x20]; \ - stx %l5, [%sp + STACK_BIAS + 0x28]; \ - stx %l6, [%sp + STACK_BIAS + 0x30]; \ - stx %l7, [%sp + STACK_BIAS + 0x38]; \ - stx %i0, [%sp + STACK_BIAS + 0x40]; \ - stx %i1, [%sp + STACK_BIAS + 0x48]; \ - stx %i2, [%sp + STACK_BIAS + 0x50]; \ - stx %i3, [%sp + STACK_BIAS + 0x58]; \ - stx %i4, [%sp + STACK_BIAS + 0x60]; \ - stx %i5, [%sp + STACK_BIAS + 0x68]; \ - stx %i6, [%sp + STACK_BIAS + 0x70]; \ - stx %i7, [%sp + STACK_BIAS + 0x78]; \ - saved; retry; nop; nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; nop; nop; nop; nop; - -#define SPILL_0_NORMAL_ETRAP \ -etrap_kernel_spill: \ - stx %l0, [%sp + STACK_BIAS + 0x00]; \ - stx %l1, [%sp + STACK_BIAS + 0x08]; \ - stx %l2, [%sp + STACK_BIAS + 0x10]; \ - stx %l3, [%sp + STACK_BIAS + 0x18]; \ - stx %l4, [%sp + STACK_BIAS + 0x20]; \ - stx %l5, [%sp + STACK_BIAS + 0x28]; \ - stx %l6, [%sp + STACK_BIAS + 0x30]; \ - stx %l7, [%sp + STACK_BIAS + 0x38]; \ - stx %i0, [%sp + STACK_BIAS + 0x40]; \ - stx %i1, [%sp + STACK_BIAS + 0x48]; \ - stx %i2, [%sp + STACK_BIAS + 0x50]; \ - stx %i3, [%sp + STACK_BIAS + 0x58]; \ - stx %i4, [%sp + STACK_BIAS + 0x60]; \ - stx %i5, [%sp + STACK_BIAS + 0x68]; \ - stx %i6, [%sp + STACK_BIAS + 0x70]; \ - stx %i7, [%sp + STACK_BIAS + 0x78]; \ - saved; \ - sub %g1, 2, %g1; \ - ba,pt %xcc, etrap_save; \ - wrpr %g1, %cwp; \ - nop; nop; nop; nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; - -/* Normal 64bit spill */ -#define SPILL_1_GENERIC(ASI) \ - add %sp, STACK_BIAS + 0x00, %g1; \ - stxa %l0, [%g1 + %g0] ASI; \ - mov 0x08, %g3; \ - stxa %l1, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %l2, [%g1 + %g0] ASI; \ - stxa %l3, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %l4, [%g1 + %g0] ASI; \ - stxa %l5, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %l6, [%g1 + %g0] ASI; \ - stxa %l7, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %i0, [%g1 + %g0] ASI; \ - stxa %i1, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %i2, [%g1 + %g0] ASI; \ - stxa %i3, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %i4, [%g1 + %g0] ASI; \ - stxa %i5, [%g1 + %g3] ASI; \ - add %g1, 0x10, %g1; \ - stxa %i6, [%g1 + %g0] ASI; \ - stxa %i7, [%g1 + %g3] ASI; \ - saved; \ - retry; nop; nop; \ - b,a,pt %xcc, spill_fixup_dax; \ - b,a,pt %xcc, spill_fixup_mna; \ - b,a,pt %xcc, spill_fixup; - -#define SPILL_1_GENERIC_ETRAP \ -etrap_user_spill_64bit: \ - stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \ - stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \ - stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \ - stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \ - stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \ - stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \ - stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \ - stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \ - stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \ - stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \ - stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \ - stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \ - stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \ - stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \ - stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \ - stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \ - saved; \ - sub %g1, 2, %g1; \ - ba,pt %xcc, etrap_save; \ - wrpr %g1, %cwp; \ - nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; \ - ba,a,pt %xcc, etrap_spill_fixup_64bit; \ - ba,a,pt %xcc, etrap_spill_fixup_64bit; \ - ba,a,pt %xcc, etrap_spill_fixup_64bit; - -#define SPILL_1_GENERIC_ETRAP_FIXUP \ -etrap_spill_fixup_64bit: \ - ldub [%g6 + TI_WSAVED], %g1; \ - sll %g1, 3, %g3; \ - add %g6, %g3, %g3; \ - stx %sp, [%g3 + TI_RWIN_SPTRS]; \ - sll %g1, 7, %g3; \ - add %g6, %g3, %g3; \ - stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ - stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \ - stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \ - stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \ - stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \ - stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \ - stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \ - stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \ - stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \ - stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \ - stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \ - stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \ - stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \ - stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \ - stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \ - stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \ - add %g1, 1, %g1; \ - stb %g1, [%g6 + TI_WSAVED]; \ - saved; \ - rdpr %cwp, %g1; \ - sub %g1, 2, %g1; \ - ba,pt %xcc, etrap_save; \ - wrpr %g1, %cwp; \ - nop; nop; nop - -/* Normal 32bit spill */ -#define SPILL_2_GENERIC(ASI) \ - srl %sp, 0, %sp; \ - stwa %l0, [%sp + %g0] ASI; \ - mov 0x04, %g3; \ - stwa %l1, [%sp + %g3] ASI; \ - add %sp, 0x08, %g1; \ - stwa %l2, [%g1 + %g0] ASI; \ - stwa %l3, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %l4, [%g1 + %g0] ASI; \ - stwa %l5, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %l6, [%g1 + %g0] ASI; \ - stwa %l7, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %i0, [%g1 + %g0] ASI; \ - stwa %i1, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %i2, [%g1 + %g0] ASI; \ - stwa %i3, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %i4, [%g1 + %g0] ASI; \ - stwa %i5, [%g1 + %g3] ASI; \ - add %g1, 0x08, %g1; \ - stwa %i6, [%g1 + %g0] ASI; \ - stwa %i7, [%g1 + %g3] ASI; \ - saved; \ - retry; nop; nop; \ - b,a,pt %xcc, spill_fixup_dax; \ - b,a,pt %xcc, spill_fixup_mna; \ - b,a,pt %xcc, spill_fixup; - -#define SPILL_2_GENERIC_ETRAP \ -etrap_user_spill_32bit: \ - srl %sp, 0, %sp; \ - stwa %l0, [%sp + 0x00] %asi; \ - stwa %l1, [%sp + 0x04] %asi; \ - stwa %l2, [%sp + 0x08] %asi; \ - stwa %l3, [%sp + 0x0c] %asi; \ - stwa %l4, [%sp + 0x10] %asi; \ - stwa %l5, [%sp + 0x14] %asi; \ - stwa %l6, [%sp + 0x18] %asi; \ - stwa %l7, [%sp + 0x1c] %asi; \ - stwa %i0, [%sp + 0x20] %asi; \ - stwa %i1, [%sp + 0x24] %asi; \ - stwa %i2, [%sp + 0x28] %asi; \ - stwa %i3, [%sp + 0x2c] %asi; \ - stwa %i4, [%sp + 0x30] %asi; \ - stwa %i5, [%sp + 0x34] %asi; \ - stwa %i6, [%sp + 0x38] %asi; \ - stwa %i7, [%sp + 0x3c] %asi; \ - saved; \ - sub %g1, 2, %g1; \ - ba,pt %xcc, etrap_save; \ - wrpr %g1, %cwp; \ - nop; nop; nop; nop; \ - nop; nop; nop; nop; \ - ba,a,pt %xcc, etrap_spill_fixup_32bit; \ - ba,a,pt %xcc, etrap_spill_fixup_32bit; \ - ba,a,pt %xcc, etrap_spill_fixup_32bit; - -#define SPILL_2_GENERIC_ETRAP_FIXUP \ -etrap_spill_fixup_32bit: \ - ldub [%g6 + TI_WSAVED], %g1; \ - sll %g1, 3, %g3; \ - add %g6, %g3, %g3; \ - stx %sp, [%g3 + TI_RWIN_SPTRS]; \ - sll %g1, 7, %g3; \ - add %g6, %g3, %g3; \ - stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ - stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \ - stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \ - stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \ - stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \ - stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \ - stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \ - stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \ - stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \ - stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \ - stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \ - stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \ - stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \ - stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \ - stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \ - stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \ - add %g1, 1, %g1; \ - stb %g1, [%g6 + TI_WSAVED]; \ - saved; \ - rdpr %cwp, %g1; \ - sub %g1, 2, %g1; \ - ba,pt %xcc, etrap_save; \ - wrpr %g1, %cwp; \ - nop; nop; nop - -#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP) -#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP) -#define SPILL_3_NORMAL SPILL_0_NORMAL -#define SPILL_4_NORMAL SPILL_0_NORMAL -#define SPILL_5_NORMAL SPILL_0_NORMAL -#define SPILL_6_NORMAL SPILL_0_NORMAL -#define SPILL_7_NORMAL SPILL_0_NORMAL - -#define SPILL_0_OTHER SPILL_0_NORMAL -#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS) -#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS) -#define SPILL_3_OTHER SPILL_3_NORMAL -#define SPILL_4_OTHER SPILL_4_NORMAL -#define SPILL_5_OTHER SPILL_5_NORMAL -#define SPILL_6_OTHER SPILL_6_NORMAL -#define SPILL_7_OTHER SPILL_7_NORMAL - -/* Normal kernel fill */ -#define FILL_0_NORMAL \ - ldx [%sp + STACK_BIAS + 0x00], %l0; \ - ldx [%sp + STACK_BIAS + 0x08], %l1; \ - ldx [%sp + STACK_BIAS + 0x10], %l2; \ - ldx [%sp + STACK_BIAS + 0x18], %l3; \ - ldx [%sp + STACK_BIAS + 0x20], %l4; \ - ldx [%sp + STACK_BIAS + 0x28], %l5; \ - ldx [%sp + STACK_BIAS + 0x30], %l6; \ - ldx [%sp + STACK_BIAS + 0x38], %l7; \ - ldx [%sp + STACK_BIAS + 0x40], %i0; \ - ldx [%sp + STACK_BIAS + 0x48], %i1; \ - ldx [%sp + STACK_BIAS + 0x50], %i2; \ - ldx [%sp + STACK_BIAS + 0x58], %i3; \ - ldx [%sp + STACK_BIAS + 0x60], %i4; \ - ldx [%sp + STACK_BIAS + 0x68], %i5; \ - ldx [%sp + STACK_BIAS + 0x70], %i6; \ - ldx [%sp + STACK_BIAS + 0x78], %i7; \ - restored; retry; nop; nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; nop; nop; nop; nop; - -#define FILL_0_NORMAL_RTRAP \ -kern_rtt_fill: \ - rdpr %cwp, %g1; \ - sub %g1, 1, %g1; \ - wrpr %g1, %cwp; \ - ldx [%sp + STACK_BIAS + 0x00], %l0; \ - ldx [%sp + STACK_BIAS + 0x08], %l1; \ - ldx [%sp + STACK_BIAS + 0x10], %l2; \ - ldx [%sp + STACK_BIAS + 0x18], %l3; \ - ldx [%sp + STACK_BIAS + 0x20], %l4; \ - ldx [%sp + STACK_BIAS + 0x28], %l5; \ - ldx [%sp + STACK_BIAS + 0x30], %l6; \ - ldx [%sp + STACK_BIAS + 0x38], %l7; \ - ldx [%sp + STACK_BIAS + 0x40], %i0; \ - ldx [%sp + STACK_BIAS + 0x48], %i1; \ - ldx [%sp + STACK_BIAS + 0x50], %i2; \ - ldx [%sp + STACK_BIAS + 0x58], %i3; \ - ldx [%sp + STACK_BIAS + 0x60], %i4; \ - ldx [%sp + STACK_BIAS + 0x68], %i5; \ - ldx [%sp + STACK_BIAS + 0x70], %i6; \ - ldx [%sp + STACK_BIAS + 0x78], %i7; \ - restored; \ - add %g1, 1, %g1; \ - ba,pt %xcc, kern_rtt_restore; \ - wrpr %g1, %cwp; \ - nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; - - -/* Normal 64bit fill */ -#define FILL_1_GENERIC(ASI) \ - add %sp, STACK_BIAS + 0x00, %g1; \ - ldxa [%g1 + %g0] ASI, %l0; \ - mov 0x08, %g2; \ - mov 0x10, %g3; \ - ldxa [%g1 + %g2] ASI, %l1; \ - mov 0x18, %g5; \ - ldxa [%g1 + %g3] ASI, %l2; \ - ldxa [%g1 + %g5] ASI, %l3; \ - add %g1, 0x20, %g1; \ - ldxa [%g1 + %g0] ASI, %l4; \ - ldxa [%g1 + %g2] ASI, %l5; \ - ldxa [%g1 + %g3] ASI, %l6; \ - ldxa [%g1 + %g5] ASI, %l7; \ - add %g1, 0x20, %g1; \ - ldxa [%g1 + %g0] ASI, %i0; \ - ldxa [%g1 + %g2] ASI, %i1; \ - ldxa [%g1 + %g3] ASI, %i2; \ - ldxa [%g1 + %g5] ASI, %i3; \ - add %g1, 0x20, %g1; \ - ldxa [%g1 + %g0] ASI, %i4; \ - ldxa [%g1 + %g2] ASI, %i5; \ - ldxa [%g1 + %g3] ASI, %i6; \ - ldxa [%g1 + %g5] ASI, %i7; \ - restored; \ - retry; nop; nop; nop; nop; \ - b,a,pt %xcc, fill_fixup_dax; \ - b,a,pt %xcc, fill_fixup_mna; \ - b,a,pt %xcc, fill_fixup; - -#define FILL_1_GENERIC_RTRAP \ -user_rtt_fill_64bit: \ - ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \ - ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \ - ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \ - ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \ - ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \ - ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \ - ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \ - ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \ - ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \ - ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \ - ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \ - ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \ - ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \ - ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \ - ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \ - ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \ - ba,pt %xcc, user_rtt_pre_restore; \ - restored; \ - nop; nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; - - -/* Normal 32bit fill */ -#define FILL_2_GENERIC(ASI) \ - srl %sp, 0, %sp; \ - lduwa [%sp + %g0] ASI, %l0; \ - mov 0x04, %g2; \ - mov 0x08, %g3; \ - lduwa [%sp + %g2] ASI, %l1; \ - mov 0x0c, %g5; \ - lduwa [%sp + %g3] ASI, %l2; \ - lduwa [%sp + %g5] ASI, %l3; \ - add %sp, 0x10, %g1; \ - lduwa [%g1 + %g0] ASI, %l4; \ - lduwa [%g1 + %g2] ASI, %l5; \ - lduwa [%g1 + %g3] ASI, %l6; \ - lduwa [%g1 + %g5] ASI, %l7; \ - add %g1, 0x10, %g1; \ - lduwa [%g1 + %g0] ASI, %i0; \ - lduwa [%g1 + %g2] ASI, %i1; \ - lduwa [%g1 + %g3] ASI, %i2; \ - lduwa [%g1 + %g5] ASI, %i3; \ - add %g1, 0x10, %g1; \ - lduwa [%g1 + %g0] ASI, %i4; \ - lduwa [%g1 + %g2] ASI, %i5; \ - lduwa [%g1 + %g3] ASI, %i6; \ - lduwa [%g1 + %g5] ASI, %i7; \ - restored; \ - retry; nop; nop; nop; nop; \ - b,a,pt %xcc, fill_fixup_dax; \ - b,a,pt %xcc, fill_fixup_mna; \ - b,a,pt %xcc, fill_fixup; - -#define FILL_2_GENERIC_RTRAP \ -user_rtt_fill_32bit: \ - srl %sp, 0, %sp; \ - lduwa [%sp + 0x00] %asi, %l0; \ - lduwa [%sp + 0x04] %asi, %l1; \ - lduwa [%sp + 0x08] %asi, %l2; \ - lduwa [%sp + 0x0c] %asi, %l3; \ - lduwa [%sp + 0x10] %asi, %l4; \ - lduwa [%sp + 0x14] %asi, %l5; \ - lduwa [%sp + 0x18] %asi, %l6; \ - lduwa [%sp + 0x1c] %asi, %l7; \ - lduwa [%sp + 0x20] %asi, %i0; \ - lduwa [%sp + 0x24] %asi, %i1; \ - lduwa [%sp + 0x28] %asi, %i2; \ - lduwa [%sp + 0x2c] %asi, %i3; \ - lduwa [%sp + 0x30] %asi, %i4; \ - lduwa [%sp + 0x34] %asi, %i5; \ - lduwa [%sp + 0x38] %asi, %i6; \ - lduwa [%sp + 0x3c] %asi, %i7; \ - ba,pt %xcc, user_rtt_pre_restore; \ - restored; \ - nop; nop; nop; nop; nop; \ - nop; nop; nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; - - -#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP) -#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP) -#define FILL_3_NORMAL FILL_0_NORMAL -#define FILL_4_NORMAL FILL_0_NORMAL -#define FILL_5_NORMAL FILL_0_NORMAL -#define FILL_6_NORMAL FILL_0_NORMAL -#define FILL_7_NORMAL FILL_0_NORMAL - -#define FILL_0_OTHER FILL_0_NORMAL -#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS) -#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS) -#define FILL_3_OTHER FILL_3_NORMAL -#define FILL_4_OTHER FILL_4_NORMAL -#define FILL_5_OTHER FILL_5_NORMAL -#define FILL_6_OTHER FILL_6_NORMAL -#define FILL_7_OTHER FILL_7_NORMAL - -#endif /* !(_SPARC64_TTABLE_H) */ +#include <asm-sparc/ttable.h> diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h index 5b1633223f9..aab72930815 100644 --- a/include/asm-sparc64/upa.h +++ b/include/asm-sparc64/upa.h @@ -1,109 +1 @@ -#ifndef _SPARC64_UPA_H -#define _SPARC64_UPA_H - -#include <asm/asi.h> - -/* UPA level registers and defines. */ - -/* UPA Config Register */ -#define UPA_CONFIG_RESV 0xffffffffc0000000 /* Reserved. */ -#define UPA_CONFIG_PCON 0x000000003fc00000 /* Depth of various sys queues. */ -#define UPA_CONFIG_MID 0x00000000003e0000 /* Module ID. */ -#define UPA_CONFIG_PCAP 0x000000000001ffff /* Port Capabilities. */ - -/* UPA Port ID Register */ -#define UPA_PORTID_FNP 0xff00000000000000 /* Hardcoded to 0xfc on ultra. */ -#define UPA_PORTID_RESV 0x00fffff800000000 /* Reserved. */ -#define UPA_PORTID_ECCVALID 0x0000000400000000 /* Zero if mod can generate ECC */ -#define UPA_PORTID_ONEREAD 0x0000000200000000 /* Set if mod generates P_RASB */ -#define UPA_PORTID_PINTRDQ 0x0000000180000000 /* # outstanding P_INT_REQ's */ -#define UPA_PORTID_PREQDQ 0x000000007e000000 /* slave-wr's to mod supported */ -#define UPA_PORTID_PREQRD 0x0000000001e00000 /* # incoming P_REQ's supported */ -#define UPA_PORTID_UPACAP 0x00000000001f0000 /* UPA capabilities of mod */ -#define UPA_PORTID_ID 0x000000000000ffff /* Module Identification bits */ - -/* UPA I/O space accessors */ -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) -static inline unsigned char _upa_readb(unsigned long addr) -{ - unsigned char ret; - - __asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */" - : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - - return ret; -} - -static inline unsigned short _upa_readw(unsigned long addr) -{ - unsigned short ret; - - __asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */" - : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - - return ret; -} - -static inline unsigned int _upa_readl(unsigned long addr) -{ - unsigned int ret; - - __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */" - : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - - return ret; -} - -static inline unsigned long _upa_readq(unsigned long addr) -{ - unsigned long ret; - - __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */" - : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - - return ret; -} - -static inline void _upa_writeb(unsigned char b, unsigned long addr) -{ - __asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */" - : /* no outputs */ - : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); -} - -static inline void _upa_writew(unsigned short w, unsigned long addr) -{ - __asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */" - : /* no outputs */ - : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); -} - -static inline void _upa_writel(unsigned int l, unsigned long addr) -{ - __asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */" - : /* no outputs */ - : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); -} - -static inline void _upa_writeq(unsigned long q, unsigned long addr) -{ - __asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */" - : /* no outputs */ - : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); -} - -#define upa_readb(__addr) (_upa_readb((unsigned long)(__addr))) -#define upa_readw(__addr) (_upa_readw((unsigned long)(__addr))) -#define upa_readl(__addr) (_upa_readl((unsigned long)(__addr))) -#define upa_readq(__addr) (_upa_readq((unsigned long)(__addr))) -#define upa_writeb(__b, __addr) (_upa_writeb((__b), (unsigned long)(__addr))) -#define upa_writew(__w, __addr) (_upa_writew((__w), (unsigned long)(__addr))) -#define upa_writel(__l, __addr) (_upa_writel((__l), (unsigned long)(__addr))) -#define upa_writeq(__q, __addr) (_upa_writeq((__q), (unsigned long)(__addr))) -#endif /* __KERNEL__ && !__ASSEMBLY__ */ - -#endif /* !(_SPARC64_UPA_H) */ +#include <asm-sparc/upa.h> diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h index d4de32f0f8a..299b26ab81a 100644 --- a/include/asm-sparc64/vio.h +++ b/include/asm-sparc64/vio.h @@ -1,406 +1 @@ -#ifndef _SPARC64_VIO_H -#define _SPARC64_VIO_H - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/mod_devicetable.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/completion.h> -#include <linux/list.h> -#include <linux/log2.h> - -#include <asm/ldc.h> -#include <asm/mdesc.h> - -struct vio_msg_tag { - u8 type; -#define VIO_TYPE_CTRL 0x01 -#define VIO_TYPE_DATA 0x02 -#define VIO_TYPE_ERR 0x04 - - u8 stype; -#define VIO_SUBTYPE_INFO 0x01 -#define VIO_SUBTYPE_ACK 0x02 -#define VIO_SUBTYPE_NACK 0x04 - - u16 stype_env; -#define VIO_VER_INFO 0x0001 -#define VIO_ATTR_INFO 0x0002 -#define VIO_DRING_REG 0x0003 -#define VIO_DRING_UNREG 0x0004 -#define VIO_RDX 0x0005 -#define VIO_PKT_DATA 0x0040 -#define VIO_DESC_DATA 0x0041 -#define VIO_DRING_DATA 0x0042 -#define VNET_MCAST_INFO 0x0101 - - u32 sid; -}; - -struct vio_rdx { - struct vio_msg_tag tag; - u64 resv[6]; -}; - -struct vio_ver_info { - struct vio_msg_tag tag; - u16 major; - u16 minor; - u8 dev_class; -#define VDEV_NETWORK 0x01 -#define VDEV_NETWORK_SWITCH 0x02 -#define VDEV_DISK 0x03 -#define VDEV_DISK_SERVER 0x04 - - u8 resv1[3]; - u64 resv2[5]; -}; - -struct vio_dring_register { - struct vio_msg_tag tag; - u64 dring_ident; - u32 num_descr; - u32 descr_size; - u16 options; -#define VIO_TX_DRING 0x0001 -#define VIO_RX_DRING 0x0002 - u16 resv; - u32 num_cookies; - struct ldc_trans_cookie cookies[0]; -}; - -struct vio_dring_unregister { - struct vio_msg_tag tag; - u64 dring_ident; - u64 resv[5]; -}; - -/* Data transfer modes */ -#define VIO_PKT_MODE 0x01 /* Packet based transfer */ -#define VIO_DESC_MODE 0x02 /* In-band descriptors */ -#define VIO_DRING_MODE 0x03 /* Descriptor rings */ - -struct vio_dring_data { - struct vio_msg_tag tag; - u64 seq; - u64 dring_ident; - u32 start_idx; - u32 end_idx; - u8 state; -#define VIO_DRING_ACTIVE 0x01 -#define VIO_DRING_STOPPED 0x02 - - u8 __pad1; - u16 __pad2; - u32 __pad3; - u64 __par4[2]; -}; - -struct vio_dring_hdr { - u8 state; -#define VIO_DESC_FREE 0x01 -#define VIO_DESC_READY 0x02 -#define VIO_DESC_ACCEPTED 0x03 -#define VIO_DESC_DONE 0x04 - u8 ack; -#define VIO_ACK_ENABLE 0x01 -#define VIO_ACK_DISABLE 0x00 - - u16 __pad1; - u32 __pad2; -}; - -/* VIO disk specific structures and defines */ -struct vio_disk_attr_info { - struct vio_msg_tag tag; - u8 xfer_mode; - u8 vdisk_type; -#define VD_DISK_TYPE_SLICE 0x01 /* Slice in block device */ -#define VD_DISK_TYPE_DISK 0x02 /* Entire block device */ - u16 resv1; - u32 vdisk_block_size; - u64 operations; - u64 vdisk_size; - u64 max_xfer_size; - u64 resv2[2]; -}; - -struct vio_disk_desc { - struct vio_dring_hdr hdr; - u64 req_id; - u8 operation; -#define VD_OP_BREAD 0x01 /* Block read */ -#define VD_OP_BWRITE 0x02 /* Block write */ -#define VD_OP_FLUSH 0x03 /* Flush disk contents */ -#define VD_OP_GET_WCE 0x04 /* Get write-cache status */ -#define VD_OP_SET_WCE 0x05 /* Enable/disable write-cache */ -#define VD_OP_GET_VTOC 0x06 /* Get VTOC */ -#define VD_OP_SET_VTOC 0x07 /* Set VTOC */ -#define VD_OP_GET_DISKGEOM 0x08 /* Get disk geometry */ -#define VD_OP_SET_DISKGEOM 0x09 /* Set disk geometry */ -#define VD_OP_SCSICMD 0x0a /* SCSI control command */ -#define VD_OP_GET_DEVID 0x0b /* Get device ID */ -#define VD_OP_GET_EFI 0x0c /* Get EFI */ -#define VD_OP_SET_EFI 0x0d /* Set EFI */ - u8 slice; - u16 resv1; - u32 status; - u64 offset; - u64 size; - u32 ncookies; - u32 resv2; - struct ldc_trans_cookie cookies[0]; -}; - -#define VIO_DISK_VNAME_LEN 8 -#define VIO_DISK_ALABEL_LEN 128 -#define VIO_DISK_NUM_PART 8 - -struct vio_disk_vtoc { - u8 volume_name[VIO_DISK_VNAME_LEN]; - u16 sector_size; - u16 num_partitions; - u8 ascii_label[VIO_DISK_ALABEL_LEN]; - struct { - u16 id; - u16 perm_flags; - u32 resv; - u64 start_block; - u64 num_blocks; - } partitions[VIO_DISK_NUM_PART]; -}; - -struct vio_disk_geom { - u16 num_cyl; /* Num data cylinders */ - u16 alt_cyl; /* Num alternate cylinders */ - u16 beg_cyl; /* Cyl off of fixed head area */ - u16 num_hd; /* Num heads */ - u16 num_sec; /* Num sectors */ - u16 ifact; /* Interleave factor */ - u16 apc; /* Alts per cylinder (SCSI) */ - u16 rpm; /* Revolutions per minute */ - u16 phy_cyl; /* Num physical cylinders */ - u16 wr_skip; /* Num sects to skip, writes */ - u16 rd_skip; /* Num sects to skip, writes */ -}; - -struct vio_disk_devid { - u16 resv; - u16 type; - u32 len; - char id[0]; -}; - -struct vio_disk_efi { - u64 lba; - u64 len; - char data[0]; -}; - -/* VIO net specific structures and defines */ -struct vio_net_attr_info { - struct vio_msg_tag tag; - u8 xfer_mode; - u8 addr_type; -#define VNET_ADDR_ETHERMAC 0x01 - u16 ack_freq; - u32 resv1; - u64 addr; - u64 mtu; - u64 resv2[3]; -}; - -#define VNET_NUM_MCAST 7 - -struct vio_net_mcast_info { - struct vio_msg_tag tag; - u8 set; - u8 count; - u8 mcast_addr[VNET_NUM_MCAST * 6]; - u32 resv; -}; - -struct vio_net_desc { - struct vio_dring_hdr hdr; - u32 size; - u32 ncookies; - struct ldc_trans_cookie cookies[0]; -}; - -#define VIO_MAX_RING_COOKIES 24 - -struct vio_dring_state { - u64 ident; - void *base; - u64 snd_nxt; - u64 rcv_nxt; - u32 entry_size; - u32 num_entries; - u32 prod; - u32 cons; - u32 pending; - int ncookies; - struct ldc_trans_cookie cookies[VIO_MAX_RING_COOKIES]; -}; - -static inline void *vio_dring_cur(struct vio_dring_state *dr) -{ - return dr->base + (dr->entry_size * dr->prod); -} - -static inline void *vio_dring_entry(struct vio_dring_state *dr, - unsigned int index) -{ - return dr->base + (dr->entry_size * index); -} - -static inline u32 vio_dring_avail(struct vio_dring_state *dr, - unsigned int ring_size) -{ - BUILD_BUG_ON(!is_power_of_2(ring_size)); - - return (dr->pending - - ((dr->prod - dr->cons) & (ring_size - 1))); -} - -#define VIO_MAX_TYPE_LEN 32 -#define VIO_MAX_COMPAT_LEN 64 - -struct vio_dev { - u64 mp; - struct device_node *dp; - - char type[VIO_MAX_TYPE_LEN]; - char compat[VIO_MAX_COMPAT_LEN]; - int compat_len; - - u64 dev_no; - - unsigned long channel_id; - - unsigned int tx_irq; - unsigned int rx_irq; - - struct device dev; -}; - -struct vio_driver { - struct list_head node; - const struct vio_device_id *id_table; - int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); - int (*remove)(struct vio_dev *dev); - void (*shutdown)(struct vio_dev *dev); - unsigned long driver_data; - struct device_driver driver; -}; - -struct vio_version { - u16 major; - u16 minor; -}; - -struct vio_driver_state; -struct vio_driver_ops { - int (*send_attr)(struct vio_driver_state *vio); - int (*handle_attr)(struct vio_driver_state *vio, void *pkt); - void (*handshake_complete)(struct vio_driver_state *vio); -}; - -struct vio_completion { - struct completion com; - int err; - int waiting_for; -}; - -struct vio_driver_state { - /* Protects VIO handshake and, optionally, driver private state. */ - spinlock_t lock; - - struct ldc_channel *lp; - - u32 _peer_sid; - u32 _local_sid; - struct vio_dring_state drings[2]; -#define VIO_DRIVER_TX_RING 0 -#define VIO_DRIVER_RX_RING 1 - - u8 hs_state; -#define VIO_HS_INVALID 0x00 -#define VIO_HS_GOTVERS 0x01 -#define VIO_HS_GOT_ATTR 0x04 -#define VIO_HS_SENT_DREG 0x08 -#define VIO_HS_SENT_RDX 0x10 -#define VIO_HS_GOT_RDX_ACK 0x20 -#define VIO_HS_GOT_RDX 0x40 -#define VIO_HS_SENT_RDX_ACK 0x80 -#define VIO_HS_COMPLETE (VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK) - - u8 dev_class; - - u8 dr_state; -#define VIO_DR_STATE_TXREG 0x01 -#define VIO_DR_STATE_RXREG 0x02 -#define VIO_DR_STATE_TXREQ 0x10 -#define VIO_DR_STATE_RXREQ 0x20 - - u8 debug; -#define VIO_DEBUG_HS 0x01 -#define VIO_DEBUG_DATA 0x02 - - void *desc_buf; - unsigned int desc_buf_len; - - struct vio_completion *cmp; - - struct vio_dev *vdev; - - struct timer_list timer; - - struct vio_version ver; - - struct vio_version *ver_table; - int ver_table_entries; - - char *name; - - struct vio_driver_ops *ops; -}; - -#define viodbg(TYPE, f, a...) \ -do { if (vio->debug & VIO_DEBUG_##TYPE) \ - printk(KERN_INFO "vio: ID[%lu] " f, \ - vio->vdev->channel_id, ## a); \ -} while (0) - -extern int vio_register_driver(struct vio_driver *drv); -extern void vio_unregister_driver(struct vio_driver *drv); - -static inline struct vio_driver *to_vio_driver(struct device_driver *drv) -{ - return container_of(drv, struct vio_driver, driver); -} - -static inline struct vio_dev *to_vio_dev(struct device *dev) -{ - return container_of(dev, struct vio_dev, dev); -} - -extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len); -extern void vio_link_state_change(struct vio_driver_state *vio, int event); -extern void vio_conn_reset(struct vio_driver_state *vio); -extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt); -extern int vio_validate_sid(struct vio_driver_state *vio, - struct vio_msg_tag *tp); -extern u32 vio_send_sid(struct vio_driver_state *vio); -extern int vio_ldc_alloc(struct vio_driver_state *vio, - struct ldc_channel_config *base_cfg, void *event_arg); -extern void vio_ldc_free(struct vio_driver_state *vio); -extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev, - u8 dev_class, struct vio_version *ver_table, - int ver_table_size, struct vio_driver_ops *ops, - char *name); - -extern void vio_port_up(struct vio_driver_state *vio); - -#endif /* _SPARC64_VIO_H */ +#include <asm-sparc/vio.h> diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h index 34f2ec64933..837a12278f4 100644 --- a/include/asm-sparc64/visasm.h +++ b/include/asm-sparc64/visasm.h @@ -1,62 +1 @@ -#ifndef _SPARC64_VISASM_H -#define _SPARC64_VISASM_H - -/* visasm.h: FPU saving macros for VIS routines - * - * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#include <asm/pstate.h> -#include <asm/ptrace.h> - -/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */ - -#define VISEntry \ - rd %fprs, %o5; \ - andcc %o5, (FPRS_FEF|FPRS_DU), %g0; \ - be,pt %icc, 297f; \ - sethi %hi(297f), %g7; \ - sethi %hi(VISenter), %g1; \ - jmpl %g1 + %lo(VISenter), %g0; \ - or %g7, %lo(297f), %g7; \ -297: wr %g0, FPRS_FEF, %fprs; \ - -#define VISExit \ - wr %g0, 0, %fprs; - -/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc. - * Must preserve %o5 between VISEntryHalf and VISExitHalf */ - -#define VISEntryHalf \ - rd %fprs, %o5; \ - andcc %o5, FPRS_FEF, %g0; \ - be,pt %icc, 297f; \ - sethi %hi(298f), %g7; \ - sethi %hi(VISenterhalf), %g1; \ - jmpl %g1 + %lo(VISenterhalf), %g0; \ - or %g7, %lo(298f), %g7; \ - clr %o5; \ -297: wr %o5, FPRS_FEF, %fprs; \ -298: - -#define VISExitHalf \ - wr %o5, 0, %fprs; - -#ifndef __ASSEMBLY__ -static inline void save_and_clear_fpu(void) { - __asm__ __volatile__ ( -" rd %%fprs, %%o5\n" -" andcc %%o5, %0, %%g0\n" -" be,pt %%icc, 299f\n" -" sethi %%hi(298f), %%g7\n" -" sethi %%hi(VISenter), %%g1\n" -" jmpl %%g1 + %%lo(VISenter), %%g0\n" -" or %%g7, %%lo(298f), %%g7\n" -" 298: wr %%g0, 0, %%fprs\n" -" 299:\n" -" " : : "i" (FPRS_FEF|FPRS_DU) : - "o5", "g1", "g2", "g3", "g7", "cc"); -} -#endif - -#endif /* _SPARC64_ASI_H */ +#include <asm-sparc/visasm.h> |