diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/gpio.h | 2 | ||||
| -rw-r--r-- | include/linux/gpio/driver.h | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/gpio-dwapb.h | 32 | ||||
| -rw-r--r-- | include/linux/spi/mcp23s08.h | 18 |
4 files changed, 57 insertions, 3 deletions
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index c1d4105e1c1..383ade1a211 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -27,7 +27,7 @@ */ #ifndef ARCH_NR_GPIOS -#define ARCH_NR_GPIOS 256 +#define ARCH_NR_GPIOS 512 #endif /* diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index c5e41da2011..249db3057e4 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -56,6 +56,8 @@ struct seq_file; * as the chip access may sleep when e.g. reading out the IRQ status * registers. * @exported: flags if the gpiochip is exported for use from sysfs. Private. + * @irq_not_threaded: flag must be set if @can_sleep is set but the + * IRQs don't need to be threaded * * A gpio_chip can help platforms abstract various sources of GPIOs so * they can all be accessed through a common programing interface. @@ -101,6 +103,7 @@ struct gpio_chip { struct gpio_desc *desc; const char *const *names; bool can_sleep; + bool irq_not_threaded; bool exported; #ifdef CONFIG_GPIOLIB_IRQCHIP @@ -141,7 +144,7 @@ extern const char *gpiochip_is_requested(struct gpio_chip *chip, /* add/remove chips */ extern int gpiochip_add(struct gpio_chip *chip); -extern int gpiochip_remove(struct gpio_chip *chip); +extern void gpiochip_remove(struct gpio_chip *chip); extern struct gpio_chip *gpiochip_find(void *data, int (*match)(struct gpio_chip *chip, void *data)); @@ -166,7 +169,8 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip, #endif /* CONFIG_GPIOLIB_IRQCHIP */ -int gpiochip_request_own_desc(struct gpio_desc *desc, const char *label); +struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum, + const char *label); void gpiochip_free_own_desc(struct gpio_desc *desc); #else /* CONFIG_GPIOLIB */ diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h new file mode 100644 index 00000000000..28702c849af --- /dev/null +++ b/include/linux/platform_data/gpio-dwapb.h @@ -0,0 +1,32 @@ +/* + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef GPIO_DW_APB_H +#define GPIO_DW_APB_H + +struct dwapb_port_property { + struct device_node *node; + const char *name; + unsigned int idx; + unsigned int ngpio; + unsigned int gpio_base; + unsigned int irq; + bool irq_shared; +}; + +struct dwapb_platform_data { + struct dwapb_port_property *properties; + unsigned int nports; +}; + +#endif diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h index 2d676d5aaa8..aa07d7b3256 100644 --- a/include/linux/spi/mcp23s08.h +++ b/include/linux/spi/mcp23s08.h @@ -22,4 +22,22 @@ struct mcp23s08_platform_data { * base to base+15 (or base+31 for s17 variant). */ unsigned base; + /* Marks the device as a interrupt controller. + * NOTE: The interrupt functionality is only supported for i2c + * versions of the chips. The spi chips can also do the interrupts, + * but this is not supported by the linux driver yet. + */ + bool irq_controller; + + /* Sets the mirror flag in the IOCON register. Devices + * with two interrupt outputs (these are the devices ending with 17 and + * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + * IO 8-15 are bank 2. These chips have two different interrupt outputs: + * One for bank 1 and another for bank 2. If irq-mirror is set, both + * interrupts are generated regardless of the bank that an input change + * occurred on. If it is not set, the interrupt are only generated for + * the bank they belong to. + * On devices with only one interrupt output this property is useless. + */ + bool mirror; }; |