diff options
Diffstat (limited to 'include')
86 files changed, 2474 insertions, 2369 deletions
diff --git a/include/Kbuild b/include/Kbuild index 8d226bfa269..83256b64166 100644 --- a/include/Kbuild +++ b/include/Kbuild @@ -1,12 +1,8 @@ # Top-level Makefile calls into asm-$(ARCH) # List only non-arch directories below -header-y += asm-generic/ header-y += linux/ header-y += sound/ -header-y += mtd/ header-y += rdma/ header-y += video/ -header-y += drm/ -header-y += xen/ header-y += scsi/ diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/asm-generic/Kbuild +++ /dev/null diff --git a/include/drm/Kbuild b/include/drm/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/drm/Kbuild +++ /dev/null diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c78bb997e2c..af1cbaf535e 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -205,6 +205,8 @@ {0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ @@ -217,6 +219,7 @@ {0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 5b57367e28d..7fe2dae251e 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -1,31 +1,5 @@ -header-y += byteorder/ -header-y += can/ -header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += hsi/ -header-y += isdn/ -header-y += mmc/ -header-y += nfsd/ header-y += raid/ -header-y += spi/ -header-y += sunrpc/ -header-y += tc_act/ -header-y += tc_ematch/ -header-y += netfilter/ -header-y += netfilter_arp/ -header-y += netfilter_bridge/ -header-y += netfilter_ipv4/ -header-y += netfilter_ipv6/ header-y += usb/ -header-y += wimax/ - -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -endif diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/byteorder/Kbuild +++ /dev/null diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/caif/Kbuild +++ /dev/null diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/can/Kbuild +++ /dev/null diff --git a/include/linux/coredump.h b/include/linux/coredump.h index 1775eb8acc0..1d7399314a8 100644 --- a/include/linux/coredump.h +++ b/include/linux/coredump.h @@ -4,6 +4,7 @@ #include <linux/types.h> #include <linux/mm.h> #include <linux/fs.h> +#include <asm/siginfo.h> /* * These are the only things you should do on a core-file: use only these diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild index f4dba8637f9..e69de29bb2d 100644 --- a/include/linux/dvb/Kbuild +++ b/include/linux/dvb/Kbuild @@ -1,8 +0,0 @@ -header-y += audio.h -header-y += ca.h -header-y += dmx.h -header-y += frontend.h -header-y += net.h -header-y += osd.h -header-y += version.h -header-y += video.h diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index f078f3ac82d..0be6d8f2b52 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -20,138 +20,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ - #ifndef _DVBDMX_H_ #define _DVBDMX_H_ -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/time.h> -#else -#include <time.h> -#endif - - -#define DMX_FILTER_SIZE 16 - -typedef enum -{ - DMX_OUT_DECODER, /* Streaming directly to decoder. */ - DMX_OUT_TAP, /* Output going to a memory buffer */ - /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ - /* (to be retrieved by reading from the */ - /* logical DVR device). */ - DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ -} dmx_output_t; - - -typedef enum -{ - DMX_IN_FRONTEND, /* Input from a front-end device. */ - DMX_IN_DVR /* Input from the logical DVR device. */ -} dmx_input_t; - - -typedef enum -{ - DMX_PES_AUDIO0, - DMX_PES_VIDEO0, - DMX_PES_TELETEXT0, - DMX_PES_SUBTITLE0, - DMX_PES_PCR0, - - DMX_PES_AUDIO1, - DMX_PES_VIDEO1, - DMX_PES_TELETEXT1, - DMX_PES_SUBTITLE1, - DMX_PES_PCR1, - - DMX_PES_AUDIO2, - DMX_PES_VIDEO2, - DMX_PES_TELETEXT2, - DMX_PES_SUBTITLE2, - DMX_PES_PCR2, - - DMX_PES_AUDIO3, - DMX_PES_VIDEO3, - DMX_PES_TELETEXT3, - DMX_PES_SUBTITLE3, - DMX_PES_PCR3, - - DMX_PES_OTHER -} dmx_pes_type_t; - -#define DMX_PES_AUDIO DMX_PES_AUDIO0 -#define DMX_PES_VIDEO DMX_PES_VIDEO0 -#define DMX_PES_TELETEXT DMX_PES_TELETEXT0 -#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0 -#define DMX_PES_PCR DMX_PES_PCR0 - - -typedef struct dmx_filter -{ - __u8 filter[DMX_FILTER_SIZE]; - __u8 mask[DMX_FILTER_SIZE]; - __u8 mode[DMX_FILTER_SIZE]; -} dmx_filter_t; - - -struct dmx_sct_filter_params -{ - __u16 pid; - dmx_filter_t filter; - __u32 timeout; - __u32 flags; -#define DMX_CHECK_CRC 1 -#define DMX_ONESHOT 2 -#define DMX_IMMEDIATE_START 4 -#define DMX_KERNEL_CLIENT 0x8000 -}; - - -struct dmx_pes_filter_params -{ - __u16 pid; - dmx_input_t input; - dmx_output_t output; - dmx_pes_type_t pes_type; - __u32 flags; -}; - -typedef struct dmx_caps { - __u32 caps; - int num_decoders; -} dmx_caps_t; - -typedef enum { - DMX_SOURCE_FRONT0 = 0, - DMX_SOURCE_FRONT1, - DMX_SOURCE_FRONT2, - DMX_SOURCE_FRONT3, - DMX_SOURCE_DVR0 = 16, - DMX_SOURCE_DVR1, - DMX_SOURCE_DVR2, - DMX_SOURCE_DVR3 -} dmx_source_t; - -struct dmx_stc { - unsigned int num; /* input : which STC? 0..N */ - unsigned int base; /* output: divisor for stc to get 90 kHz clock */ - __u64 stc; /* output: stc in 'base'*90 kHz units */ -}; - - -#define DMX_START _IO('o', 41) -#define DMX_STOP _IO('o', 42) -#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params) -#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) -#define DMX_SET_BUFFER_SIZE _IO('o', 45) -#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) -#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) -#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) -#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) -#define DMX_ADD_PID _IOW('o', 51, __u16) -#define DMX_REMOVE_PID _IOW('o', 52, __u16) +#include <uapi/linux/dvb/dmx.h> #endif /*_DVBDMX_H_*/ diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h index 1d750c0fd86..85c20d92569 100644 --- a/include/linux/dvb/video.h +++ b/include/linux/dvb/video.h @@ -20,257 +20,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ - #ifndef _DVBVIDEO_H_ #define _DVBVIDEO_H_ -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/compiler.h> -#else -#include <stdint.h> -#include <time.h> -#endif - -typedef enum { - VIDEO_FORMAT_4_3, /* Select 4:3 format */ - VIDEO_FORMAT_16_9, /* Select 16:9 format. */ - VIDEO_FORMAT_221_1 /* 2.21:1 */ -} video_format_t; - - -typedef enum { - VIDEO_SYSTEM_PAL, - VIDEO_SYSTEM_NTSC, - VIDEO_SYSTEM_PALN, - VIDEO_SYSTEM_PALNc, - VIDEO_SYSTEM_PALM, - VIDEO_SYSTEM_NTSC60, - VIDEO_SYSTEM_PAL60, - VIDEO_SYSTEM_PALM60 -} video_system_t; - - -typedef enum { - VIDEO_PAN_SCAN, /* use pan and scan format */ - VIDEO_LETTER_BOX, /* use letterbox format */ - VIDEO_CENTER_CUT_OUT /* use center cut out format */ -} video_displayformat_t; - -typedef struct { - int w; - int h; - video_format_t aspect_ratio; -} video_size_t; - -typedef enum { - VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ - VIDEO_SOURCE_MEMORY /* If this source is selected, the stream - comes from the user through the write - system call */ -} video_stream_source_t; - - -typedef enum { - VIDEO_STOPPED, /* Video is stopped */ - VIDEO_PLAYING, /* Video is currently playing */ - VIDEO_FREEZED /* Video is freezed */ -} video_play_state_t; - - -/* Decoder commands */ -#define VIDEO_CMD_PLAY (0) -#define VIDEO_CMD_STOP (1) -#define VIDEO_CMD_FREEZE (2) -#define VIDEO_CMD_CONTINUE (3) - -/* Flags for VIDEO_CMD_FREEZE */ -#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) - -/* Flags for VIDEO_CMD_STOP */ -#define VIDEO_CMD_STOP_TO_BLACK (1 << 0) -#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) - -/* Play input formats: */ -/* The decoder has no special format requirements */ -#define VIDEO_PLAY_FMT_NONE (0) -/* The decoder requires full GOPs */ -#define VIDEO_PLAY_FMT_GOP (1) - -/* The structure must be zeroed before use by the application - This ensures it can be extended safely in the future. */ -struct video_command { - __u32 cmd; - __u32 flags; - union { - struct { - __u64 pts; - } stop; - - struct { - /* 0 or 1000 specifies normal speed, - 1 specifies forward single stepping, - -1 specifies backward single stepping, - >1: playback at speed/1000 of the normal speed, - <-1: reverse playback at (-speed/1000) of the normal speed. */ - __s32 speed; - __u32 format; - } play; - - struct { - __u32 data[16]; - } raw; - }; -}; - -/* FIELD_UNKNOWN can be used if the hardware does not know whether - the Vsync is for an odd, even or progressive (i.e. non-interlaced) - field. */ -#define VIDEO_VSYNC_FIELD_UNKNOWN (0) -#define VIDEO_VSYNC_FIELD_ODD (1) -#define VIDEO_VSYNC_FIELD_EVEN (2) -#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) - -struct video_event { - __s32 type; -#define VIDEO_EVENT_SIZE_CHANGED 1 -#define VIDEO_EVENT_FRAME_RATE_CHANGED 2 -#define VIDEO_EVENT_DECODER_STOPPED 3 -#define VIDEO_EVENT_VSYNC 4 - __kernel_time_t timestamp; - union { - video_size_t size; - unsigned int frame_rate; /* in frames per 1000sec */ - unsigned char vsync_field; /* unknown/odd/even/progressive */ - } u; -}; - - -struct video_status { - int video_blank; /* blank video on freeze? */ - video_play_state_t play_state; /* current state of playback */ - video_stream_source_t stream_source; /* current source (demux/memory) */ - video_format_t video_format; /* current aspect ratio of stream*/ - video_displayformat_t display_format;/* selected cropping mode */ -}; - - -struct video_still_picture { - char __user *iFrame; /* pointer to a single iframe in memory */ - __s32 size; -}; - - -typedef -struct video_highlight { - int active; /* 1=show highlight, 0=hide highlight */ - __u8 contrast1; /* 7- 4 Pattern pixel contrast */ - /* 3- 0 Background pixel contrast */ - __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ - /* 3- 0 Emphasis pixel-1 contrast */ - __u8 color1; /* 7- 4 Pattern pixel color */ - /* 3- 0 Background pixel color */ - __u8 color2; /* 7- 4 Emphasis pixel-2 color */ - /* 3- 0 Emphasis pixel-1 color */ - __u32 ypos; /* 23-22 auto action mode */ - /* 21-12 start y */ - /* 9- 0 end y */ - __u32 xpos; /* 23-22 button color number */ - /* 21-12 start x */ - /* 9- 0 end x */ -} video_highlight_t; - - -typedef struct video_spu { - int active; - int stream_id; -} video_spu_t; - - -typedef struct video_spu_palette { /* SPU Palette information */ - int length; - __u8 __user *palette; -} video_spu_palette_t; - - -typedef struct video_navi_pack { - int length; /* 0 ... 1024 */ - __u8 data[1024]; -} video_navi_pack_t; - - -typedef __u16 video_attributes_t; -/* bits: descr. */ -/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ -/* 13-12 TV system (0=525/60, 1=625/50) */ -/* 11-10 Aspect ratio (0=4:3, 3=16:9) */ -/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ -/* 7 line 21-1 data present in GOP (1=yes, 0=no) */ -/* 6 line 21-2 data present in GOP (1=yes, 0=no) */ -/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ -/* 2 source letterboxed (1=yes, 0=no) */ -/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ - - -/* bit definitions for capabilities: */ -/* can the hardware decode MPEG1 and/or MPEG2? */ -#define VIDEO_CAP_MPEG1 1 -#define VIDEO_CAP_MPEG2 2 -/* can you send a system and/or program stream to video device? - (you still have to open the video and the audio device but only - send the stream to the video device) */ -#define VIDEO_CAP_SYS 4 -#define VIDEO_CAP_PROG 8 -/* can the driver also handle SPU, NAVI and CSS encoded data? - (CSS API is not present yet) */ -#define VIDEO_CAP_SPU 16 -#define VIDEO_CAP_NAVI 32 -#define VIDEO_CAP_CSS 64 - - -#define VIDEO_STOP _IO('o', 21) -#define VIDEO_PLAY _IO('o', 22) -#define VIDEO_FREEZE _IO('o', 23) -#define VIDEO_CONTINUE _IO('o', 24) -#define VIDEO_SELECT_SOURCE _IO('o', 25) -#define VIDEO_SET_BLANK _IO('o', 26) -#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status) -#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event) -#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29) -#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture) -#define VIDEO_FAST_FORWARD _IO('o', 31) -#define VIDEO_SLOWMOTION _IO('o', 32) -#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int) -#define VIDEO_CLEAR_BUFFER _IO('o', 34) -#define VIDEO_SET_ID _IO('o', 35) -#define VIDEO_SET_STREAMTYPE _IO('o', 36) -#define VIDEO_SET_FORMAT _IO('o', 37) -#define VIDEO_SET_SYSTEM _IO('o', 38) -#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t) -#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t) -#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t) -#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t) -#define VIDEO_SET_ATTRIBUTES _IO('o', 53) -#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t) -#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int) - -/** - * VIDEO_GET_PTS - * - * Read the 33 bit presentation time stamp as defined - * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. - * - * The PTS should belong to the currently played - * frame if possible, but may also be a value close to it - * like the PTS of the last decoded frame or the last PTS - * extracted by the PES parser. - */ -#define VIDEO_GET_PTS _IOR('o', 57, __u64) - -/* Read the number of displayed frames since the decoder was started */ -#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64) - -#define VIDEO_COMMAND _IOWR('o', 59, struct video_command) -#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command) +#include <uapi/linux/dvb/video.h> #endif /*_DVBVIDEO_H_*/ diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index c18257b0fa7..6dd4787a798 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -61,7 +61,7 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor, const char *fmt, ...); #define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \ - static struct _ddebug __used __aligned(8) \ + static struct _ddebug __aligned(8) \ __attribute__((section("__verbose"))) name = { \ .modname = KBUILD_MODNAME, \ .function = __func__, \ diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h new file mode 100644 index 00000000000..386440317b0 --- /dev/null +++ b/include/linux/elf-fdpic.h @@ -0,0 +1,51 @@ +/* FDPIC ELF load map + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_ELF_FDPIC_H +#define _LINUX_ELF_FDPIC_H + +#include <uapi/linux/elf-fdpic.h> + +/* + * binfmt binary parameters structure + */ +struct elf_fdpic_params { + struct elfhdr hdr; /* ref copy of ELF header */ + struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ + struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ + unsigned long elfhdr_addr; /* mapped ELF header user address */ + unsigned long ph_addr; /* mapped PT_PHDR user address */ + unsigned long map_addr; /* mapped loadmap user address */ + unsigned long entry_addr; /* mapped entry user address */ + unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ + unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ + unsigned long load_addr; /* user address at which to map binary */ + unsigned long flags; +#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ +#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ +#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ +#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant + * displacement */ +#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ +#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ +#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ +#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ +#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ +}; + +#ifdef CONFIG_MMU +extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk); +#endif + +#endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 7443a560c9d..2c26c14cd71 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -68,7 +68,7 @@ enum extcon_cable_name { EXTCON_VIDEO_OUT, EXTCON_MECHANICAL, }; -extern const char *extcon_cable_name[]; +extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; struct extcon_cable; diff --git a/include/linux/fs.h b/include/linux/fs.h index 001c7cff2d4..b33cfc97b9c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -64,6 +64,73 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, ssize_t bytes, void *private, int ret, bool is_async); +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 + +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)0x1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)0x2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)0x4) +/* file can be accessed using pread */ +#define FMODE_PREAD ((__force fmode_t)0x8) +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)0x10) +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)0x20) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)0x40) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)0x80) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ +#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) + +/* + * Don't update ctime and mtime. + * + * Currently a special hack for the XFS open_by_handle ioctl, but we'll + * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. + */ +#define FMODE_NOCMTIME ((__force fmode_t)0x800) + +/* Expect random access pattern */ +#define FMODE_RANDOM ((__force fmode_t)0x1000) + +/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ +#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) + +/* File is opened with O_PATH; almost nothing can be done with it */ +#define FMODE_PATH ((__force fmode_t)0x4000) + +/* File was opened by fanotify and shouldn't generate fanotify events */ +#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) + +/* + * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector + * that indicates that they should check the contents of the iovec are + * valid, but not check the memory that the iovec elements + * points too. + */ +#define CHECK_IOVEC_ONLY -1 + /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the @@ -1557,6 +1624,60 @@ struct super_operations { }; /* + * Inode flags - they have no relation to superblock flags now + */ +#define S_SYNC 1 /* Writes are synced at once */ +#define S_NOATIME 2 /* Do not update access times */ +#define S_APPEND 4 /* Append-only file */ +#define S_IMMUTABLE 8 /* Immutable file */ +#define S_DEAD 16 /* removed, but still open directory */ +#define S_NOQUOTA 32 /* Inode is not counted to quota */ +#define S_DIRSYNC 64 /* Directory modifications are synchronous */ +#define S_NOCMTIME 128 /* Do not update file c/mtime */ +#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ +#define S_PRIVATE 512 /* Inode is fs-internal */ +#define S_IMA 1024 /* Inode has an associated IMA struct */ +#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ + +/* + * Note that nosuid etc flags are inode-specific: setting some file-system + * flags just means all the inodes inherit those flags by default. It might be + * possible to override it selectively if you really wanted to with some + * ioctl() that is not currently implemented. + * + * Exception: MS_RDONLY is always applied to the entire file system. + * + * Unfortunately, it is possible to change a filesystems flags with it mounted + * with files in use. This means that all of the inodes will not have their + * i_flags updated. Hence, i_flags no longer inherit the superblock mount + * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org + */ +#define __IS_FLG(inode, flg) ((inode)->i_sb->s_flags & (flg)) + +#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) +#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ + ((inode)->i_flags & S_SYNC)) +#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ + ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) +#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) +#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) +#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) + +#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) +#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) +#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) +#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) + +#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) +#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) +#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) +#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) +#define IS_IMA(inode) ((inode)->i_flags & S_IMA) +#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) + +/* * Inode state bits. Protected by inode->i_lock * * Three bits determine the dirty state of the inode, I_DIRTY_SYNC, @@ -1688,6 +1809,11 @@ int sync_inode_metadata(struct inode *inode, int wait); struct file_system_type { const char *name; int fs_flags; +#define FS_REQUIRES_DEV 1 +#define FS_BINARY_MOUNTDATA 2 +#define FS_HAS_SUBTYPE 4 +#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ +#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */ struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild index 271a770b478..e69de29bb2d 100644 --- a/include/linux/hsi/Kbuild +++ b/include/linux/hsi/Kbuild @@ -1 +0,0 @@ -header-y += hsi_char.h diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index c0ae76ac4e0..7806c24e5bc 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -618,4 +618,20 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) }; #endif +/** + * IIO_DEGREE_TO_RAD() - Convert degree to rad + * @deg: A value in degree + * + * Returns the given value converted from degree to rad + */ +#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL) + +/** + * IIO_G_TO_M_S_2() - Convert g to meter / second**2 + * @g: A value in g + * + * Returns the given value converted from g to meter / second**2 + */ +#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL) + #endif /* _INDUSTRIAL_IO_H_ */ diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/isdn/Kbuild +++ /dev/null diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 569d67d4243..d452ee19106 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -57,6 +57,7 @@ int memblock_add(phys_addr_t base, phys_addr_t size); int memblock_remove(phys_addr_t base, phys_addr_t size); int memblock_free(phys_addr_t base, phys_addr_t size); int memblock_reserve(phys_addr_t base, phys_addr_t size); +void memblock_trim_memory(phys_addr_t align); #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index 1d28ae90384..fe03b2d35d4 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -30,7 +30,20 @@ #ifndef __LINUX_MFD_MAX77693_H #define __LINUX_MFD_MAX77693_H +struct max77693_reg_data { + u8 addr; + u8 data; +}; + +struct max77693_muic_platform_data { + struct max77693_reg_data *init_data; + int num_init_data; +}; + struct max77693_platform_data { int wakeup; + + /* muic data */ + struct max77693_muic_platform_data *muic_data; }; #endif /* __LINUX_MFD_MAX77693_H */ diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/mmc/Kbuild +++ /dev/null diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild deleted file mode 100644 index b3322023e9a..00000000000 --- a/include/linux/netfilter/Kbuild +++ /dev/null @@ -1 +0,0 @@ -header-y += ipset/ diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/netfilter/ipset/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/netfilter_arp/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/netfilter_bridge/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/netfilter_ipv4/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/netfilter_ipv6/Kbuild +++ /dev/null diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/nfsd/Kbuild +++ /dev/null diff --git a/include/linux/of.h b/include/linux/of.h index 72843b72a2b..b4e50d56fc7 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -331,6 +331,13 @@ static inline bool of_have_populated_dt(void) #define for_each_child_of_node(parent, child) \ while (0) +static inline struct device_node *of_get_child_by_name( + const struct device_node *node, + const char *name) +{ + return NULL; +} + static inline int of_get_child_count(const struct device_node *np) { return 0; diff --git a/include/linux/of_address.h b/include/linux/of_address.h index c3cdc1025c3..a1984dd037d 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -19,7 +19,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index); * the address space flags too. The PCI version uses a BAR number * instead of an absolute index */ -extern const u32 *of_get_address(struct device_node *dev, int index, +extern const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags); #ifndef pci_address_to_pio @@ -44,7 +44,7 @@ static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } -static inline const u32 *of_get_address(struct device_node *dev, int index, +static inline const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { return NULL; diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index b8e24112520..535cecf1e02 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -58,8 +58,8 @@ static inline int of_irq_map_oldworld(struct device_node *device, int index, #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, +extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, + u32 ointsize, const __be32 *addr, struct of_irq *out_irq); extern int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq); diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index cf80f7e5277..250a4acddb2 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -12,34 +12,27 @@ struct percpu_rw_semaphore { struct mutex mtx; }; +#define light_mb() barrier() +#define heavy_mb() synchronize_sched() + static inline void percpu_down_read(struct percpu_rw_semaphore *p) { - rcu_read_lock(); + rcu_read_lock_sched(); if (unlikely(p->locked)) { - rcu_read_unlock(); + rcu_read_unlock_sched(); mutex_lock(&p->mtx); this_cpu_inc(*p->counters); mutex_unlock(&p->mtx); return; } this_cpu_inc(*p->counters); - rcu_read_unlock(); + rcu_read_unlock_sched(); + light_mb(); /* A, between read of p->locked and read of data, paired with D */ } static inline void percpu_up_read(struct percpu_rw_semaphore *p) { - /* - * On X86, write operation in this_cpu_dec serves as a memory unlock - * barrier (i.e. memory accesses may be moved before the write, but - * no memory accesses are moved past the write). - * On other architectures this may not be the case, so we need smp_mb() - * there. - */ -#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE)) - barrier(); -#else - smp_mb(); -#endif + light_mb(); /* B, between read of the data and write to p->counter, paired with C */ this_cpu_dec(*p->counters); } @@ -58,14 +51,15 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p) { mutex_lock(&p->mtx); p->locked = true; - synchronize_rcu(); + synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */ while (__percpu_count(p->counters)) msleep(1); - smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */ + heavy_mb(); /* C, between read of p->counter and write to data, paired with B */ } static inline void percpu_up_write(struct percpu_rw_semaphore *p) { + heavy_mb(); /* D, between write to data and write to p->locked, paired with A */ p->locked = false; mutex_unlock(&p->mtx); } diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 2e902359aee..6bfb2faa0b1 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -803,12 +803,16 @@ static inline void perf_event_task_tick(void) { } do { \ static struct notifier_block fn##_nb __cpuinitdata = \ { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ + unsigned long cpu = smp_processor_id(); \ + unsigned long flags; \ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ + local_irq_save(flags); \ fn(&fn##_nb, (unsigned long)CPU_STARTING, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ + local_irq_restore(flags); \ fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ register_cpu_notifier(&fn##_nb); \ } while (0) diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index 00474b04714..65e3e87eacc 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -47,15 +47,9 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) } extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns); -extern void free_pid_ns(struct kref *kref); extern void zap_pid_ns_processes(struct pid_namespace *pid_ns); extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd); - -static inline void put_pid_ns(struct pid_namespace *ns) -{ - if (ns != &init_pid_ns) - kref_put(&ns->kref, free_pid_ns); -} +extern void put_pid_ns(struct pid_namespace *ns); #else /* !CONFIG_PID_NS */ #include <linux/err.h> diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index e11ccb4cf48..0a260d8a18b 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -46,20 +46,17 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON((condition) && __ratelimit(state)) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = 0; \ - if (unlikely(__ratelimit(state))) \ - rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ DEFAULT_RATELIMIT_INTERVAL, \ DEFAULT_RATELIMIT_BURST); \ - __WARN_RATELIMIT(condition, &_rs, format); \ + int rtn = !!(condition); \ + \ + if (unlikely(rtn && __ratelimit(&_rs))) \ + WARN(rtn, format, ##__VA_ARGS__); \ + \ + rtn; \ }) #else @@ -67,15 +64,9 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON(condition) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ - int rtn = WARN(condition, format); \ + int rtn = WARN(condition, format, ##__VA_ARGS__); \ rtn; \ }) diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h index 214caa33433..2ac60c9cf64 100644 --- a/include/linux/rbtree_augmented.h +++ b/include/linux/rbtree_augmented.h @@ -24,6 +24,7 @@ #ifndef _LINUX_RBTREE_AUGMENTED_H #define _LINUX_RBTREE_AUGMENTED_H +#include <linux/compiler.h> #include <linux/rbtree.h> /* diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/spi/Kbuild +++ /dev/null diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h index d9b0c84220c..8f721e465e0 100644 --- a/include/linux/spi/tsc2005.h +++ b/include/linux/spi/tsc2005.h @@ -3,8 +3,6 @@ * * Copyright (C) 2009-2010 Nokia Corporation * - * Contact: Aaro Koskinen <aaro.koskinen@nokia.com> - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/sunrpc/Kbuild +++ /dev/null diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/tc_act/Kbuild +++ /dev/null diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/tc_ematch/Kbuild +++ /dev/null diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8a7fc4be2d7..60b7aac15e0 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -191,7 +191,8 @@ struct tcp_sock { u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ early_retrans_delayed:1, /* Delayed ER timer installed */ syn_data:1, /* SYN includes data */ - syn_fastopen:1; /* SYN includes Fast Open option */ + syn_fastopen:1, /* SYN includes Fast Open option */ + syn_data_acked:1;/* data in SYN is acked by SYN-ACK */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index e6f0331e3d4..24594571c5a 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -35,16 +35,6 @@ struct inode; # include <asm/uprobes.h> #endif -/* flags that denote/change uprobes behaviour */ - -/* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 - -/* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 -/* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 - struct uprobe_consumer { int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs); /* @@ -59,7 +49,6 @@ struct uprobe_consumer { #ifdef CONFIG_UPROBES enum uprobe_task_state { UTASK_RUNNING, - UTASK_BP_HIT, UTASK_SSTEP, UTASK_SSTEP_ACK, UTASK_SSTEP_TRAPPED, diff --git a/include/linux/usb.h b/include/linux/usb.h index 07915a32fb9..689b14b26c8 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -482,6 +482,7 @@ struct usb3_lpm_parameters { * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume + * @port_is_suspended: the upstream port is suspended (L2 or U3) * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. * @slot_id: Slot ID assigned by xHCI @@ -560,6 +561,7 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; + unsigned port_is_suspended:1; #endif struct wusb_dev *wusb_dev; int slot_id; @@ -588,8 +590,9 @@ extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, */ #define usb_hub_for_each_child(hdev, port1, child) \ for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ - port1 <= hdev->maxchild; \ - child = usb_hub_find_child(hdev, ++port1)) + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) \ + if (!child) continue; else /* USB device locking */ #define usb_lock_device(udev) device_lock(&(udev)->dev) @@ -805,6 +808,22 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bcdDevice_hi = (hi) /** + * USB_DEVICE_INTERFACE_CLASS - describe a usb device with a specific interface class + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface class of devices. + */ +#define USB_DEVICE_INTERFACE_CLASS(vend, prod, cl) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (cl) + +/** * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID @@ -1129,8 +1148,8 @@ extern int usb_disabled(void); * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame - * ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired + * slot in the schedule */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ @@ -1309,15 +1328,20 @@ typedef void (*usb_complete_t)(struct urb *); * the transfer interval in the endpoint descriptor is logarithmic. * Device drivers must convert that value to linear units themselves.) * - * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling - * the host controller to schedule the transfer as soon as bandwidth - * utilization allows, and then set start_frame to reflect the actual frame - * selected during submission. Otherwise drivers must specify the start_frame - * and handle the case where the transfer can't begin then. However, drivers - * won't know how bandwidth is currently allocated, and while they can - * find the current frame using usb_get_current_frame_number () they can't - * know the range for that frame number. (Ranges for frame counter values - * are HC-specific, and can go from 256 to 65536 frames from "now".) + * If an isochronous endpoint queue isn't already running, the host + * controller will schedule a new URB to start as soon as bandwidth + * utilization allows. If the queue is running then a new URB will be + * scheduled to start in the first transfer slot following the end of the + * preceding URB, if that slot has not already expired. If the slot has + * expired (which can happen when IRQ delivery is delayed for a long time), + * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag + * is clear then the URB will be scheduled to start in the expired slot, + * implying that some of its packets will not be transferred; if the flag + * is set then the URB will be scheduled in the first unexpired slot, + * breaking the queue's synchronization. Upon URB completion, the + * start_frame field will be set to the (micro)frame number in which the + * transfer was scheduled. Ranges for frame counter values are HC-specific + * and can go from as low as 256 to as high as 65536 frames. * * Isochronous URBs have a different data transfer model, in part because * the quality of service is only "best effort". Callers provide specially @@ -1778,17 +1802,6 @@ static inline int usb_translate_errors(int error_code) extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); -#ifdef DEBUG -#define dbg(format, arg...) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg) -#else -#define dbg(format, arg...) \ -do { \ - if (0) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) -#endif - /* debugfs stuff */ extern struct dentry *usb_debug_root; diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index b607f3532e8..e69de29bb2d 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,10 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += ch11.h -header-y += functionfs.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += video.h diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index a54b8255d75..3d84619110a 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -17,531 +17,11 @@ * Types and defines in this file are either specific to version 1.0 of * this standard or common for newer versions. */ - #ifndef __LINUX_USB_AUDIO_H #define __LINUX_USB_AUDIO_H -#include <linux/types.h> - -/* bInterfaceProtocol values to denote the version of the standard used */ -#define UAC_VERSION_1 0x00 -#define UAC_VERSION_2 0x20 - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ -#define UAC_HEADER 0x01 -#define UAC_INPUT_TERMINAL 0x02 -#define UAC_OUTPUT_TERMINAL 0x03 -#define UAC_MIXER_UNIT 0x04 -#define UAC_SELECTOR_UNIT 0x05 -#define UAC_FEATURE_UNIT 0x06 -#define UAC1_PROCESSING_UNIT 0x07 -#define UAC1_EXTENSION_UNIT 0x08 - -/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ -#define UAC_AS_GENERAL 0x01 -#define UAC_FORMAT_TYPE 0x02 -#define UAC_FORMAT_SPECIFIC 0x03 - -/* A.7 Processing Unit Process Types */ -#define UAC_PROCESS_UNDEFINED 0x00 -#define UAC_PROCESS_UP_DOWNMIX 0x01 -#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 -#define UAC_PROCESS_STEREO_EXTENDER 0x03 -#define UAC_PROCESS_REVERB 0x04 -#define UAC_PROCESS_CHORUS 0x05 -#define UAC_PROCESS_DYN_RANGE_COMP 0x06 - -/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_EP_GENERAL 0x01 - -/* A.9 Audio Class-Specific Request Codes */ -#define UAC_SET_ 0x00 -#define UAC_GET_ 0x80 - -#define UAC__CUR 0x1 -#define UAC__MIN 0x2 -#define UAC__MAX 0x3 -#define UAC__RES 0x4 -#define UAC__MEM 0x5 - -#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) -#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) -#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) -#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) -#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) -#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) -#define UAC_SET_RES (UAC_SET_ | UAC__RES) -#define UAC_GET_RES (UAC_GET_ | UAC__RES) -#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) -#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) - -#define UAC_GET_STAT 0xff - -/* A.10 Control Selector Codes */ - -/* A.10.1 Terminal Control Selectors */ -#define UAC_TERM_COPY_PROTECT 0x01 - -/* A.10.2 Feature Unit Control Selectors */ -#define UAC_FU_MUTE 0x01 -#define UAC_FU_VOLUME 0x02 -#define UAC_FU_BASS 0x03 -#define UAC_FU_MID 0x04 -#define UAC_FU_TREBLE 0x05 -#define UAC_FU_GRAPHIC_EQUALIZER 0x06 -#define UAC_FU_AUTOMATIC_GAIN 0x07 -#define UAC_FU_DELAY 0x08 -#define UAC_FU_BASS_BOOST 0x09 -#define UAC_FU_LOUDNESS 0x0a - -#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) - -/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ -#define UAC_UD_ENABLE 0x01 -#define UAC_UD_MODE_SELECT 0x02 - -/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ -#define UAC_DP_ENABLE 0x01 -#define UAC_DP_MODE_SELECT 0x02 - -/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ -#define UAC_3D_ENABLE 0x01 -#define UAC_3D_SPACE 0x02 - -/* A.10.3.4 Reverberation Processing Unit Control Selectors */ -#define UAC_REVERB_ENABLE 0x01 -#define UAC_REVERB_LEVEL 0x02 -#define UAC_REVERB_TIME 0x03 -#define UAC_REVERB_FEEDBACK 0x04 - -/* A.10.3.5 Chorus Processing Unit Control Selectors */ -#define UAC_CHORUS_ENABLE 0x01 -#define UAC_CHORUS_LEVEL 0x02 -#define UAC_CHORUS_RATE 0x03 -#define UAC_CHORUS_DEPTH 0x04 - -/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ -#define UAC_DCR_ENABLE 0x01 -#define UAC_DCR_RATE 0x02 -#define UAC_DCR_MAXAMPL 0x03 -#define UAC_DCR_THRESHOLD 0x04 -#define UAC_DCR_ATTACK_TIME 0x05 -#define UAC_DCR_RELEASE_TIME 0x06 - -/* A.10.4 Extension Unit Control Selectors */ -#define UAC_XU_ENABLE 0x01 - -/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define UAC_MS_HEADER 0x01 -#define UAC_MIDI_IN_JACK 0x02 -#define UAC_MIDI_OUT_JACK 0x03 - -/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_MS_GENERAL 0x01 - -/* Terminals - 2.1 USB Terminal Types */ -#define UAC_TERMINAL_UNDEFINED 0x100 -#define UAC_TERMINAL_STREAMING 0x101 -#define UAC_TERMINAL_VENDOR_SPEC 0x1FF - -/* Terminal Control Selectors */ -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac1_ac_header_descriptor { - __u8 bLength; /* 8 + n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac1_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 4.3.2.1 Input Terminal Descriptor */ -struct uac_input_terminal_descriptor { - __u8 bLength; /* in bytes: 12 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Output Terminal associated */ - __u8 bNrChannels; /* Number of logical output channels */ - __le16 wChannelConfig; - __u8 iChannelNames; - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_INPUT_TERMINAL_SIZE 12 - -/* Terminals - 2.2 Input Terminal Types */ -#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 -#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 -#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 - -/* Terminals - control selectors */ - -#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 - -/* 4.3.2.2 Output Terminal Descriptor */ -struct uac1_output_terminal_descriptor { - __u8 bLength; /* in bytes: 9 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Input Terminal associated */ - __u8 bSourceID; /* ID of the connected Unit or Terminal*/ - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* Terminals - 2.3 Output Terminal Types */ -#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 - -/* Set bControlSize = 2 as default setting */ -#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct uac_feature_unit_descriptor_##ch { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bUnitID; \ - __u8 bSourceID; \ - __u8 bControlSize; \ - __le16 bmaControls[ch + 1]; \ - __u8 iFeature; \ -} __attribute__ ((packed)) - -/* 4.3.2.3 Mixer Unit Descriptor */ -struct uac_mixer_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); +#include <uapi/linux/usb/audio.h> -static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 4] : - &desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.4 Selector Unit Descriptor */ -struct uac_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUintID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.5 Feature Unit Descriptor */ -struct uac_feature_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bSourceID; - __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ -} __attribute__((packed)); - -static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.6 Processing Unit Descriptors */ -struct uac_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u16 wProcessType; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; -} - -static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; -} - -static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; -} - -/* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac1_as_header_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* AS_GENERAL */ - __u8 bTerminalLink; /* Terminal ID of connected Terminal */ - __u8 bDelay; /* Delay introduced by the data path */ - __le16 wFormatTag; /* The Audio Data Format */ -} __attribute__ ((packed)); - -#define UAC_DT_AS_HEADER_SIZE 7 - -/* Formats - A.1.1 Audio Data Format Type I Codes */ -#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I_PCM 0x1 -#define UAC_FORMAT_TYPE_I_PCM8 0x2 -#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define UAC_FORMAT_TYPE_I_ALAW 0x4 -#define UAC_FORMAT_TYPE_I_MULAW 0x5 - -struct uac_format_type_i_continuous_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tLowerSamFreq[3]; - __u8 tUpperSamFreq[3]; -} __attribute__ ((packed)); - -#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 - -struct uac_format_type_i_discrete_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__ ((packed)); - -#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct uac_format_type_i_discrete_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bFormatType; \ - __u8 bNrChannels; \ - __u8 bSubframeSize; \ - __u8 bBitResolution; \ - __u8 bSamFreqType; \ - __u8 tSamFreq[n][3]; \ -} __attribute__ ((packed)) - -#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -struct uac_format_type_i_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u8 bSubslotSize; - __u8 bBitResolution; - __u8 bHeaderLength; - __u8 bControlSize; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* Formats - Audio Data Format Type I Codes */ - -#define UAC_FORMAT_TYPE_II_MPEG 0x1001 -#define UAC_FORMAT_TYPE_II_AC3 0x1002 - -struct uac_format_type_ii_discrete_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __le16 wMaxBitRate; - __le16 wSamplesPerFrame; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__((packed)); - -struct uac_format_type_ii_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u16 wMaxBitRate; - __u16 wSamplesPerFrame; - __u8 bHeaderLength; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* type III */ -#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 - -/* Formats - A.2 Format Type Codes */ -#define UAC_FORMAT_TYPE_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I 0x1 -#define UAC_FORMAT_TYPE_II 0x2 -#define UAC_FORMAT_TYPE_III 0x3 -#define UAC_EXT_FORMAT_TYPE_I 0x81 -#define UAC_EXT_FORMAT_TYPE_II 0x82 -#define UAC_EXT_FORMAT_TYPE_III 0x83 - -struct uac_iso_endpoint_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* EP_GENERAL */ - __u8 bmAttributes; - __u8 bLockDelayUnits; - __le16 wLockDelay; -} __attribute__((packed)); -#define UAC_ISO_ENDPOINT_DESC_SIZE 7 - -#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 -#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 -#define UAC_EP_CS_ATTR_FILL_MAX 0x80 - -/* status word format (3.7.1.1) */ - -#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f -#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 - -#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) -#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) - -struct uac1_status_word { - __u8 bStatusType; - __u8 bOriginator; -} __attribute__((packed)); - -#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -561,6 +41,4 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c2838..9c210f2283d 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -29,887 +29,11 @@ * someone that the two other points are non-issues for that * particular descriptor type. */ - #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include <linux/types.h> /* __u8 etc */ -#include <asm/byteorder.h> /* le16_to_cpu */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C -#define USB_REQ_SET_SEL 0x30 -#define USB_REQ_SET_ISOCH_DELAY 0x31 - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -/* - * Test Mode Selectors - * See USB 2.0 spec Table 9-7 - */ -#define TEST_J 1 -#define TEST_K 2 -#define TEST_SE0_NAK 3 -#define TEST_PACKET 4 -#define TEST_FORCE_EN 5 - -/* - * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 - */ -#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ -#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ -#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ -#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ - -#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 -/* - * Suspend Options, Table 9-7 USB 3.0 spec - */ -#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) -#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - -/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ -#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ -#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ -#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 -/* From the T10 UAS specification */ -#define USB_DT_PIPE_USAGE 0x24 -/* From the USB 3.0 spec */ -#define USB_DT_SS_ENDPOINT_COMP 0x30 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ -#define USB_ENDPOINT_INTRTYPE 0x30 -#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) -#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) - -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - -#define USB_ENDPOINT_USAGE_MASK 0x30 -#define USB_ENDPOINT_USAGE_DATA 0x00 -#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 -#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ - -/*-------------------------------------------------------------------------*/ - -/** - * usb_endpoint_num - get the endpoint's number - * @epd: endpoint to be checked - * - * Returns @epd's number: 0 to 15. - */ -static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -/** - * usb_endpoint_type - get the endpoint's transfer type - * @epd: endpoint to be checked - * - * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according - * to @epd's transfer type. - */ -static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -static inline int usb_endpoint_dir_out( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_bulk( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_control - check if the endpoint has control transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type control, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_control( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_int( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_isoc( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_maxp - get endpoint's max packet size - * @epd: endpoint to be checked - * - * Returns @epd's max packet - */ -static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) -{ - return __le16_to_cpu(epd->wMaxPacketSize); -} - -static inline int usb_endpoint_interrupt_type( - const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; -} - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ss_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bmAttributes; - __le16 wBytesPerInterval; -} __attribute__ ((packed)); - -#define USB_DT_SS_EP_COMP_SIZE 6 - -/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -static inline int -usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) -{ - int max_streams; - - if (!comp) - return 0; - - max_streams = comp->bmAttributes & 0x1f; - - if (!max_streams) - return 0; - - max_streams = 1 << max_streams; - - return max_streams; -} - -/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ -#define USB_SS_MULT(p) (1 + ((p) & 0x3)) - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -#define USB_DT_BOS_SIZE 5 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -/* USB 2.0 Extension descriptor */ -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __le32 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ -#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ -#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ -#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) -#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) -} __attribute__((packed)); - -#define USB_DT_USB_EXT_CAP_SIZE 7 - -/* - * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB - * specific device level capabilities - */ -#define USB_SS_CAP_TYPE 3 -struct usb_ss_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ - __le16 wSpeedSupported; -#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ -#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ -#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ -#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ - __u8 bFunctionalitySupport; - __u8 bU1devExitLat; - __le16 bU2DevExitLat; -} __attribute__((packed)); - -#define USB_DT_USB_SS_CAP_SIZE 10 - -/* - * Container ID Capability descriptor: Defines the instance unique ID used to - * identify the instance across all operating modes - */ -#define CONTAINER_ID_TYPE 4 -struct usb_ss_container_id_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bReserved; - __u8 ContainerID[16]; /* 128-bit number */ -} __attribute__((packed)); - -#define USB_DT_USB_SS_CONTN_ID_SIZE 20 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ +#include <uapi/linux/usb/ch9.h> -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ - USB_SPEED_SUPER, /* usb 3.0 */ -}; - -#ifdef __KERNEL__ /** * usb_speed_string() - Returns human readable-name of the speed. @@ -919,86 +43,4 @@ enum usb_device_speed { */ extern const char *usb_speed_string(enum usb_device_speed speed); -#endif - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -enum usb3_link_state { - USB3_LPM_U0 = 0, - USB3_LPM_U1, - USB3_LPM_U2, - USB3_LPM_U3 -}; - -/* - * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. - * 0xff means the parent hub will accept transitions to U1, but will not - * initiate a transition. - * - * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to - * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved - * values. - * - * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. - * 0xff means the parent hub will accept transitions to U2, but will not - * initiate a transition. - * - * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to - * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 - * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means - * 65.024ms. - */ -#define USB3_LPM_DISABLED 0x0 -#define USB3_LPM_U1_MAX_TIMEOUT 0x7F -#define USB3_LPM_U2_MAX_TIMEOUT 0xFE -#define USB3_LPM_DEVICE_INITIATED 0xFF - -struct usb_set_sel_req { - __u8 u1_sel; - __u8 u1_pel; - __le16 u2_sel; - __le16 u2_pel; -} __attribute__ ((packed)); - -/* - * The Set System Exit Latency control transfer provides one byte each for - * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each - * are two bytes long. - */ -#define USB3_LPM_MAX_U1_SEL_PEL 0xFF -#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF - -/*-------------------------------------------------------------------------*/ - -/* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 - */ -#define USB_SELF_POWER_VBUS_MAX_DRAW 100 - #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index c9d09f8b7ff..99238b096f7 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -29,6 +29,8 @@ * initialization. * @port_power_off: set to 1 if the controller needs to be powered down * after initialization. + * @no_io_watchdog: set to 1 if the controller does not need the I/O + * watchdog to run. * * These are general configuration options for the EHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -39,8 +41,7 @@ struct usb_ehci_pdata { unsigned has_synopsys_hc_bug:1; unsigned big_endian_desc:1; unsigned big_endian_mmio:1; - unsigned port_power_on:1; - unsigned port_power_off:1; + unsigned no_io_watchdog:1; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h index fc618d8d1e9..639ee45779f 100644 --- a/include/linux/usb/ezusb.h +++ b/include/linux/usb/ezusb.h @@ -1,16 +1,8 @@ #ifndef __EZUSB_H #define __EZUSB_H - -extern int ezusb_writememory(struct usb_device *dev, int address, - unsigned char *data, int length, __u8 bRequest); - extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit); -extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit); - extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, const char *firmware_path); -extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, - const char *firmware_path); #endif /* __EZUSB_H */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index a843d085136..65d0a88dbc6 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -1,171 +1,8 @@ #ifndef __LINUX_FUNCTIONFS_H__ #define __LINUX_FUNCTIONFS_H__ 1 +#include <uapi/linux/usb/functionfs.h> -#include <linux/types.h> -#include <linux/ioctl.h> - -#include <linux/usb/ch9.h> - - -enum { - FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 -}; - - -#ifndef __KERNEL__ - -/* Descriptor of an non-audio endpoint */ -struct usb_endpoint_descriptor_no_audio { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; -} __attribute__((packed)); - - -/* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* - * Descriptors format: - * - * | off | name | type | description | - * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | length | LE32 | length of the whole data chunk | - * | 8 | fs_count | LE32 | number of full-speed descriptors | - * | 12 | hs_count | LE32 | number of high-speed descriptors | - * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | - * | | hs_descrs | Descriptor[] | list of high-speed descriptors | - * - * descs are just valid USB descriptors and have the following format: - * - * | off | name | type | description | - * |-----+-----------------+------+--------------------------| - * | 0 | bLength | U8 | length of the descriptor | - * | 1 | bDescriptorType | U8 | descriptor type | - * | 2 | payload | | descriptor's payload | - */ - -struct usb_functionfs_strings_head { - __le32 magic; - __le32 length; - __le32 str_count; - __le32 lang_count; -} __attribute__((packed)); - -/* - * Strings format: - * - * | off | name | type | description | - * |-----+------------+-----------------------+----------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | - * | 4 | length | LE32 | length of the data chunk | - * | 8 | str_count | LE32 | number of strings | - * | 12 | lang_count | LE32 | number of languages | - * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | - * - * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: - * - * | off | name | type | description | - * |-----+---------+-------------------+------------------------------------| - * | 0 | lang | LE16 | language code | - * | 2 | strings | String[str_count] | array of strings in given language | - * - * For each string there is one strings entry (ie. there are str_count - * string entries). Each String is a NUL terminated string encoded in - * UTF-8. - */ - -#endif - - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_functionfs_event_type { - FUNCTIONFS_BIND, - FUNCTIONFS_UNBIND, - - FUNCTIONFS_ENABLE, - FUNCTIONFS_DISABLE, - - FUNCTIONFS_SETUP, - - FUNCTIONFS_SUSPEND, - FUNCTIONFS_RESUME -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_functionfs_event { - union { - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction */ - struct usb_ctrlrequest setup; - } __attribute__((packed)) u; - - /* enum usb_functionfs_event_type */ - __u8 type; - __u8 _pad[3]; -} __attribute__((packed)); - - -/* Endpoint ioctls */ -/* The same as in gadgetfs */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) - -/* Specific for functionfs */ - -/* - * Returns reverse mapping of an interface. Called on EP0. If there - * is no such interface returns -EDOM. If function is not active - * returns -ENODEV. - */ -#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) - -/* - * Returns real bEndpointAddress of an endpoint. If function is not - * active returns -ENODEV. - */ -#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) - - -#ifdef __KERNEL__ struct ffs_data; struct usb_composite_dev; @@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data) #endif - -#endif diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h index 74e7755168b..012f2b7eb2b 100644 --- a/include/linux/usb/ohci_pdriver.h +++ b/include/linux/usb/ohci_pdriver.h @@ -25,6 +25,7 @@ * @big_endian_desc: BE descriptors * @big_endian_mmio: BE registers * @no_big_frame_no: no big endian frame_no shift + * @num_ports: number of ports * * These are general configuration options for the OHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -33,6 +34,7 @@ struct usb_ohci_pdata { unsigned big_endian_desc:1; unsigned big_endian_mmio:1; unsigned no_big_frame_no:1; + unsigned int num_ports; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/linux/wimax/Kbuild +++ /dev/null diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/mtd/Kbuild +++ /dev/null diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b498908224..f8cd4cf3fad 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request { const u8 *ie; size_t ie_len; u16 reason_code; + bool local_state_change; }; /** diff --git a/include/uapi/asm-generic/kvm_para.h b/include/uapi/asm-generic/kvm_para.h index e69de29bb2d..486f0af73c3 100644 --- a/include/uapi/asm-generic/kvm_para.h +++ b/include/uapi/asm-generic/kvm_para.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here, but the file must not be empty or patch + * will delete it. + */ diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild index aafaa5aa54d..d40942cfc62 100644 --- a/include/uapi/linux/dvb/Kbuild +++ b/include/uapi/linux/dvb/Kbuild @@ -1 +1,9 @@ # UAPI Header export list +header-y += audio.h +header-y += ca.h +header-y += dmx.h +header-y += frontend.h +header-y += net.h +header-y += osd.h +header-y += version.h +header-y += video.h diff --git a/include/linux/dvb/audio.h b/include/uapi/linux/dvb/audio.h index d47bccd604e..d47bccd604e 100644 --- a/include/linux/dvb/audio.h +++ b/include/uapi/linux/dvb/audio.h diff --git a/include/linux/dvb/ca.h b/include/uapi/linux/dvb/ca.h index c18537f3e44..c18537f3e44 100644 --- a/include/linux/dvb/ca.h +++ b/include/uapi/linux/dvb/ca.h diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h new file mode 100644 index 00000000000..b2a9ad8cafd --- /dev/null +++ b/include/uapi/linux/dvb/dmx.h @@ -0,0 +1,155 @@ +/* + * dmx.h + * + * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> + * & Ralph Metzler <ralph@convergence.de> + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _UAPI_DVBDMX_H_ +#define _UAPI_DVBDMX_H_ + +#include <linux/types.h> +#ifndef __KERNEL__ +#include <time.h> +#endif + + +#define DMX_FILTER_SIZE 16 + +typedef enum +{ + DMX_OUT_DECODER, /* Streaming directly to decoder. */ + DMX_OUT_TAP, /* Output going to a memory buffer */ + /* (to be retrieved via the read command).*/ + DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ + /* (to be retrieved by reading from the */ + /* logical DVR device). */ + DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ +} dmx_output_t; + + +typedef enum +{ + DMX_IN_FRONTEND, /* Input from a front-end device. */ + DMX_IN_DVR /* Input from the logical DVR device. */ +} dmx_input_t; + + +typedef enum +{ + DMX_PES_AUDIO0, + DMX_PES_VIDEO0, + DMX_PES_TELETEXT0, + DMX_PES_SUBTITLE0, + DMX_PES_PCR0, + + DMX_PES_AUDIO1, + DMX_PES_VIDEO1, + DMX_PES_TELETEXT1, + DMX_PES_SUBTITLE1, + DMX_PES_PCR1, + + DMX_PES_AUDIO2, + DMX_PES_VIDEO2, + DMX_PES_TELETEXT2, + DMX_PES_SUBTITLE2, + DMX_PES_PCR2, + + DMX_PES_AUDIO3, + DMX_PES_VIDEO3, + DMX_PES_TELETEXT3, + DMX_PES_SUBTITLE3, + DMX_PES_PCR3, + + DMX_PES_OTHER +} dmx_pes_type_t; + +#define DMX_PES_AUDIO DMX_PES_AUDIO0 +#define DMX_PES_VIDEO DMX_PES_VIDEO0 +#define DMX_PES_TELETEXT DMX_PES_TELETEXT0 +#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0 +#define DMX_PES_PCR DMX_PES_PCR0 + + +typedef struct dmx_filter +{ + __u8 filter[DMX_FILTER_SIZE]; + __u8 mask[DMX_FILTER_SIZE]; + __u8 mode[DMX_FILTER_SIZE]; +} dmx_filter_t; + + +struct dmx_sct_filter_params +{ + __u16 pid; + dmx_filter_t filter; + __u32 timeout; + __u32 flags; +#define DMX_CHECK_CRC 1 +#define DMX_ONESHOT 2 +#define DMX_IMMEDIATE_START 4 +#define DMX_KERNEL_CLIENT 0x8000 +}; + + +struct dmx_pes_filter_params +{ + __u16 pid; + dmx_input_t input; + dmx_output_t output; + dmx_pes_type_t pes_type; + __u32 flags; +}; + +typedef struct dmx_caps { + __u32 caps; + int num_decoders; +} dmx_caps_t; + +typedef enum { + DMX_SOURCE_FRONT0 = 0, + DMX_SOURCE_FRONT1, + DMX_SOURCE_FRONT2, + DMX_SOURCE_FRONT3, + DMX_SOURCE_DVR0 = 16, + DMX_SOURCE_DVR1, + DMX_SOURCE_DVR2, + DMX_SOURCE_DVR3 +} dmx_source_t; + +struct dmx_stc { + unsigned int num; /* input : which STC? 0..N */ + unsigned int base; /* output: divisor for stc to get 90 kHz clock */ + __u64 stc; /* output: stc in 'base'*90 kHz units */ +}; + + +#define DMX_START _IO('o', 41) +#define DMX_STOP _IO('o', 42) +#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params) +#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) +#define DMX_SET_BUFFER_SIZE _IO('o', 45) +#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) +#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) +#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) +#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) +#define DMX_ADD_PID _IOW('o', 51, __u16) +#define DMX_REMOVE_PID _IOW('o', 52, __u16) + +#endif /* _UAPI_DVBDMX_H_ */ diff --git a/include/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c12d452cb40..c12d452cb40 100644 --- a/include/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h diff --git a/include/linux/dvb/net.h b/include/uapi/linux/dvb/net.h index f451e7eb0b0..f451e7eb0b0 100644 --- a/include/linux/dvb/net.h +++ b/include/uapi/linux/dvb/net.h diff --git a/include/linux/dvb/osd.h b/include/uapi/linux/dvb/osd.h index 880e6843583..880e6843583 100644 --- a/include/linux/dvb/osd.h +++ b/include/uapi/linux/dvb/osd.h diff --git a/include/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 827cce7e33e..827cce7e33e 100644 --- a/include/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h diff --git a/include/uapi/linux/dvb/video.h b/include/uapi/linux/dvb/video.h new file mode 100644 index 00000000000..d3d14a59d2d --- /dev/null +++ b/include/uapi/linux/dvb/video.h @@ -0,0 +1,274 @@ +/* + * video.h + * + * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> + * & Ralph Metzler <ralph@convergence.de> + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _UAPI_DVBVIDEO_H_ +#define _UAPI_DVBVIDEO_H_ + +#include <linux/types.h> +#ifndef __KERNEL__ +#include <stdint.h> +#include <time.h> +#endif + +typedef enum { + VIDEO_FORMAT_4_3, /* Select 4:3 format */ + VIDEO_FORMAT_16_9, /* Select 16:9 format. */ + VIDEO_FORMAT_221_1 /* 2.21:1 */ +} video_format_t; + + +typedef enum { + VIDEO_SYSTEM_PAL, + VIDEO_SYSTEM_NTSC, + VIDEO_SYSTEM_PALN, + VIDEO_SYSTEM_PALNc, + VIDEO_SYSTEM_PALM, + VIDEO_SYSTEM_NTSC60, + VIDEO_SYSTEM_PAL60, + VIDEO_SYSTEM_PALM60 +} video_system_t; + + +typedef enum { + VIDEO_PAN_SCAN, /* use pan and scan format */ + VIDEO_LETTER_BOX, /* use letterbox format */ + VIDEO_CENTER_CUT_OUT /* use center cut out format */ +} video_displayformat_t; + +typedef struct { + int w; + int h; + video_format_t aspect_ratio; +} video_size_t; + +typedef enum { + VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ + VIDEO_SOURCE_MEMORY /* If this source is selected, the stream + comes from the user through the write + system call */ +} video_stream_source_t; + + +typedef enum { + VIDEO_STOPPED, /* Video is stopped */ + VIDEO_PLAYING, /* Video is currently playing */ + VIDEO_FREEZED /* Video is freezed */ +} video_play_state_t; + + +/* Decoder commands */ +#define VIDEO_CMD_PLAY (0) +#define VIDEO_CMD_STOP (1) +#define VIDEO_CMD_FREEZE (2) +#define VIDEO_CMD_CONTINUE (3) + +/* Flags for VIDEO_CMD_FREEZE */ +#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) + +/* Flags for VIDEO_CMD_STOP */ +#define VIDEO_CMD_STOP_TO_BLACK (1 << 0) +#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play input formats: */ +/* The decoder has no special format requirements */ +#define VIDEO_PLAY_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define VIDEO_PLAY_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct video_command { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } play; + + struct { + __u32 data[16]; + } raw; + }; +}; + +/* FIELD_UNKNOWN can be used if the hardware does not know whether + the Vsync is for an odd, even or progressive (i.e. non-interlaced) + field. */ +#define VIDEO_VSYNC_FIELD_UNKNOWN (0) +#define VIDEO_VSYNC_FIELD_ODD (1) +#define VIDEO_VSYNC_FIELD_EVEN (2) +#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) + +struct video_event { + __s32 type; +#define VIDEO_EVENT_SIZE_CHANGED 1 +#define VIDEO_EVENT_FRAME_RATE_CHANGED 2 +#define VIDEO_EVENT_DECODER_STOPPED 3 +#define VIDEO_EVENT_VSYNC 4 + __kernel_time_t timestamp; + union { + video_size_t size; + unsigned int frame_rate; /* in frames per 1000sec */ + unsigned char vsync_field; /* unknown/odd/even/progressive */ + } u; +}; + + +struct video_status { + int video_blank; /* blank video on freeze? */ + video_play_state_t play_state; /* current state of playback */ + video_stream_source_t stream_source; /* current source (demux/memory) */ + video_format_t video_format; /* current aspect ratio of stream*/ + video_displayformat_t display_format;/* selected cropping mode */ +}; + + +struct video_still_picture { + char __user *iFrame; /* pointer to a single iframe in memory */ + __s32 size; +}; + + +typedef +struct video_highlight { + int active; /* 1=show highlight, 0=hide highlight */ + __u8 contrast1; /* 7- 4 Pattern pixel contrast */ + /* 3- 0 Background pixel contrast */ + __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ + /* 3- 0 Emphasis pixel-1 contrast */ + __u8 color1; /* 7- 4 Pattern pixel color */ + /* 3- 0 Background pixel color */ + __u8 color2; /* 7- 4 Emphasis pixel-2 color */ + /* 3- 0 Emphasis pixel-1 color */ + __u32 ypos; /* 23-22 auto action mode */ + /* 21-12 start y */ + /* 9- 0 end y */ + __u32 xpos; /* 23-22 button color number */ + /* 21-12 start x */ + /* 9- 0 end x */ +} video_highlight_t; + + +typedef struct video_spu { + int active; + int stream_id; +} video_spu_t; + + +typedef struct video_spu_palette { /* SPU Palette information */ + int length; + __u8 __user *palette; +} video_spu_palette_t; + + +typedef struct video_navi_pack { + int length; /* 0 ... 1024 */ + __u8 data[1024]; +} video_navi_pack_t; + + +typedef __u16 video_attributes_t; +/* bits: descr. */ +/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ +/* 13-12 TV system (0=525/60, 1=625/50) */ +/* 11-10 Aspect ratio (0=4:3, 3=16:9) */ +/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ +/* 7 line 21-1 data present in GOP (1=yes, 0=no) */ +/* 6 line 21-2 data present in GOP (1=yes, 0=no) */ +/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ +/* 2 source letterboxed (1=yes, 0=no) */ +/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ + + +/* bit definitions for capabilities: */ +/* can the hardware decode MPEG1 and/or MPEG2? */ +#define VIDEO_CAP_MPEG1 1 +#define VIDEO_CAP_MPEG2 2 +/* can you send a system and/or program stream to video device? + (you still have to open the video and the audio device but only + send the stream to the video device) */ +#define VIDEO_CAP_SYS 4 +#define VIDEO_CAP_PROG 8 +/* can the driver also handle SPU, NAVI and CSS encoded data? + (CSS API is not present yet) */ +#define VIDEO_CAP_SPU 16 +#define VIDEO_CAP_NAVI 32 +#define VIDEO_CAP_CSS 64 + + +#define VIDEO_STOP _IO('o', 21) +#define VIDEO_PLAY _IO('o', 22) +#define VIDEO_FREEZE _IO('o', 23) +#define VIDEO_CONTINUE _IO('o', 24) +#define VIDEO_SELECT_SOURCE _IO('o', 25) +#define VIDEO_SET_BLANK _IO('o', 26) +#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status) +#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event) +#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29) +#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture) +#define VIDEO_FAST_FORWARD _IO('o', 31) +#define VIDEO_SLOWMOTION _IO('o', 32) +#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int) +#define VIDEO_CLEAR_BUFFER _IO('o', 34) +#define VIDEO_SET_ID _IO('o', 35) +#define VIDEO_SET_STREAMTYPE _IO('o', 36) +#define VIDEO_SET_FORMAT _IO('o', 37) +#define VIDEO_SET_SYSTEM _IO('o', 38) +#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t) +#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t) +#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t) +#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t) +#define VIDEO_SET_ATTRIBUTES _IO('o', 53) +#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t) +#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int) + +/** + * VIDEO_GET_PTS + * + * Read the 33 bit presentation time stamp as defined + * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + * + * The PTS should belong to the currently played + * frame if possible, but may also be a value close to it + * like the PTS of the last decoded frame or the last PTS + * extracted by the PES parser. + */ +#define VIDEO_GET_PTS _IOR('o', 57, __u64) + +/* Read the number of displayed frames since the decoder was started */ +#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64) + +#define VIDEO_COMMAND _IOWR('o', 59, struct video_command) +#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command) + +#endif /* _UAPI_DVBVIDEO_H_ */ diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h index 1065078938f..3921e33aec8 100644 --- a/include/uapi/linux/elf-fdpic.h +++ b/include/uapi/linux/elf-fdpic.h @@ -9,8 +9,8 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _LINUX_ELF_FDPIC_H -#define _LINUX_ELF_FDPIC_H +#ifndef _UAPI_LINUX_ELF_FDPIC_H +#define _UAPI_LINUX_ELF_FDPIC_H #include <linux/elf.h> @@ -31,40 +31,4 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 -#ifndef __KERNEL__ -/* - * binfmt binary parameters structure - */ -struct elf_fdpic_params { - struct elfhdr hdr; /* ref copy of ELF header */ - struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ - struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ - unsigned long elfhdr_addr; /* mapped ELF header user address */ - unsigned long ph_addr; /* mapped PT_PHDR user address */ - unsigned long map_addr; /* mapped loadmap user address */ - unsigned long entry_addr; /* mapped entry user address */ - unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ - unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ - unsigned long load_addr; /* user address at which to map binary */ - unsigned long flags; -#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ -#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ -#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ -#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant - * displacement */ -#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ -#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ -#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ -#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ -#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ -}; - -#ifdef CONFIG_MMU -extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, - struct elf_fdpic_params *interp_params, - unsigned long *start_stack, - unsigned long *start_brk); -#endif -#endif /* __KERNEL__ */ - -#endif /* _LINUX_ELF_FDPIC_H */ +#endif /* _UAPI_LINUX_ELF_FDPIC_H */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 9fcc880d4be..780d4c6093e 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -57,85 +57,6 @@ struct inodes_stat_t { #define NR_FILE 8192 /* this can well be larger on a larger system */ -#define MAY_EXEC 0x00000001 -#define MAY_WRITE 0x00000002 -#define MAY_READ 0x00000004 -#define MAY_APPEND 0x00000008 -#define MAY_ACCESS 0x00000010 -#define MAY_OPEN 0x00000020 -#define MAY_CHDIR 0x00000040 -/* called from RCU mode, don't block */ -#define MAY_NOT_BLOCK 0x00000080 - -/* - * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond - * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() - */ - -/* file is open for reading */ -#define FMODE_READ ((__force fmode_t)0x1) -/* file is open for writing */ -#define FMODE_WRITE ((__force fmode_t)0x2) -/* file is seekable */ -#define FMODE_LSEEK ((__force fmode_t)0x4) -/* file can be accessed using pread */ -#define FMODE_PREAD ((__force fmode_t)0x8) -/* file can be accessed using pwrite */ -#define FMODE_PWRITE ((__force fmode_t)0x10) -/* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)0x20) -/* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)0x40) -/* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)0x80) -/* File is opened using open(.., 3, ..) and is writeable only for ioctls - (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) -/* 32bit hashes as llseek() offset (for directories) */ -#define FMODE_32BITHASH ((__force fmode_t)0x200) -/* 64bit hashes as llseek() offset (for directories) */ -#define FMODE_64BITHASH ((__force fmode_t)0x400) - -/* - * Don't update ctime and mtime. - * - * Currently a special hack for the XFS open_by_handle ioctl, but we'll - * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. - */ -#define FMODE_NOCMTIME ((__force fmode_t)0x800) - -/* Expect random access pattern */ -#define FMODE_RANDOM ((__force fmode_t)0x1000) - -/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ -#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) - -/* File is opened with O_PATH; almost nothing can be done with it */ -#define FMODE_PATH ((__force fmode_t)0x4000) - -/* File was opened by fanotify and shouldn't generate fanotify events */ -#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) - -/* - * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector - * that indicates that they should check the contents of the iovec are - * valid, but not check the memory that the iovec elements - * points too. - */ -#define CHECK_IOVEC_ONLY -1 - -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - -/* public flags for file_system_type */ -#define FS_REQUIRES_DEV 1 -#define FS_BINARY_MOUNTDATA 2 -#define FS_HAS_SUBTYPE 4 -#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ -#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() - * during rename() internally. - */ /* * These are the fs-independent mount-flags: up to 32 flags are supported @@ -181,59 +102,6 @@ struct inodes_stat_t { #define MS_MGC_VAL 0xC0ED0000 #define MS_MGC_MSK 0xffff0000 -/* Inode flags - they have nothing to superblock flags now */ - -#define S_SYNC 1 /* Writes are synced at once */ -#define S_NOATIME 2 /* Do not update access times */ -#define S_APPEND 4 /* Append-only file */ -#define S_IMMUTABLE 8 /* Immutable file */ -#define S_DEAD 16 /* removed, but still open directory */ -#define S_NOQUOTA 32 /* Inode is not counted to quota */ -#define S_DIRSYNC 64 /* Directory modifications are synchronous */ -#define S_NOCMTIME 128 /* Do not update file c/mtime */ -#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ -#define S_PRIVATE 512 /* Inode is fs-internal */ -#define S_IMA 1024 /* Inode has an associated IMA struct */ -#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ -#define S_NOSEC 4096 /* no suid or xattr security attributes */ - -/* - * Note that nosuid etc flags are inode-specific: setting some file-system - * flags just means all the inodes inherit those flags by default. It might be - * possible to override it selectively if you really wanted to with some - * ioctl() that is not currently implemented. - * - * Exception: MS_RDONLY is always applied to the entire file system. - * - * Unfortunately, it is possible to change a filesystems flags with it mounted - * with files in use. This means that all of the inodes will not have their - * i_flags updated. Hence, i_flags no longer inherit the superblock mount - * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org - */ -#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - /* the read-only stuff doesn't really belong here, but any other place is probably as bad and I don't want to create yet another include file. */ diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild index aafaa5aa54d..30ab3cd3b8a 100644 --- a/include/uapi/linux/hsi/Kbuild +++ b/include/uapi/linux/hsi/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += hsi_char.h diff --git a/include/linux/hsi/hsi_char.h b/include/uapi/linux/hsi/hsi_char.h index 76160b4f455..76160b4f455 100644 --- a/include/linux/hsi/hsi_char.h +++ b/include/uapi/linux/hsi/hsi_char.h diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h index e69de29bb2d..ae5704fa77a 100644 --- a/include/uapi/linux/irqnr.h +++ b/include/uapi/linux/irqnr.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index c4b89a5cb7d..e962faa5ab0 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -130,6 +130,7 @@ enum { #define TCPI_OPT_WSCALE 4 #define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ #define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ +#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ enum tcp_ca_state { TCP_CA_Open = 0, diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild index aafaa5aa54d..6cb4ea82683 100644 --- a/include/uapi/linux/usb/Kbuild +++ b/include/uapi/linux/usb/Kbuild @@ -1 +1,11 @@ # UAPI Header export list +header-y += audio.h +header-y += cdc.h +header-y += ch11.h +header-y += ch9.h +header-y += functionfs.h +header-y += g_printer.h +header-y += gadgetfs.h +header-y += midi.h +header-y += tmc.h +header-y += video.h diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h new file mode 100644 index 00000000000..ac90037894d --- /dev/null +++ b/include/uapi/linux/usb/audio.h @@ -0,0 +1,545 @@ +/* + * <linux/usb/audio.h> -- USB Audio definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for Audio Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/audio10.pdf + * + * Types and defines in this file are either specific to version 1.0 of + * this standard or common for newer versions. + */ + +#ifndef _UAPI__LINUX_USB_AUDIO_H +#define _UAPI__LINUX_USB_AUDIO_H + +#include <linux/types.h> + +/* bInterfaceProtocol values to denote the version of the standard used */ +#define UAC_VERSION_1 0x00 +#define UAC_VERSION_2 0x20 + +/* A.2 Audio Interface Subclass Codes */ +#define USB_SUBCLASS_AUDIOCONTROL 0x01 +#define USB_SUBCLASS_AUDIOSTREAMING 0x02 +#define USB_SUBCLASS_MIDISTREAMING 0x03 + +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC1_PROCESSING_UNIT 0x07 +#define UAC1_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.7 Processing Unit Process Types */ +#define UAC_PROCESS_UNDEFINED 0x00 +#define UAC_PROCESS_UP_DOWNMIX 0x01 +#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 +#define UAC_PROCESS_STEREO_EXTENDER 0x03 +#define UAC_PROCESS_REVERB 0x04 +#define UAC_PROCESS_CHORUS 0x05 +#define UAC_PROCESS_DYN_RANGE_COMP 0x06 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* A.10 Control Selector Codes */ + +/* A.10.1 Terminal Control Selectors */ +#define UAC_TERM_COPY_PROTECT 0x01 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_MUTE 0x01 +#define UAC_FU_VOLUME 0x02 +#define UAC_FU_BASS 0x03 +#define UAC_FU_MID 0x04 +#define UAC_FU_TREBLE 0x05 +#define UAC_FU_GRAPHIC_EQUALIZER 0x06 +#define UAC_FU_AUTOMATIC_GAIN 0x07 +#define UAC_FU_DELAY 0x08 +#define UAC_FU_BASS_BOOST 0x09 +#define UAC_FU_LOUDNESS 0x0a + +#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) + +/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ +#define UAC_UD_ENABLE 0x01 +#define UAC_UD_MODE_SELECT 0x02 + +/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ +#define UAC_DP_ENABLE 0x01 +#define UAC_DP_MODE_SELECT 0x02 + +/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ +#define UAC_3D_ENABLE 0x01 +#define UAC_3D_SPACE 0x02 + +/* A.10.3.4 Reverberation Processing Unit Control Selectors */ +#define UAC_REVERB_ENABLE 0x01 +#define UAC_REVERB_LEVEL 0x02 +#define UAC_REVERB_TIME 0x03 +#define UAC_REVERB_FEEDBACK 0x04 + +/* A.10.3.5 Chorus Processing Unit Control Selectors */ +#define UAC_CHORUS_ENABLE 0x01 +#define UAC_CHORUS_LEVEL 0x02 +#define UAC_CHORUS_RATE 0x03 +#define UAC_CHORUS_DEPTH 0x04 + +/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ +#define UAC_DCR_ENABLE 0x01 +#define UAC_DCR_RATE 0x02 +#define UAC_DCR_MAXAMPL 0x03 +#define UAC_DCR_THRESHOLD 0x04 +#define UAC_DCR_ATTACK_TIME 0x05 +#define UAC_DCR_RELEASE_TIME 0x06 + +/* A.10.4 Extension Unit Control Selectors */ +#define UAC_XU_ENABLE 0x01 + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ +/* 4.3.2 Class-Specific AC Interface Descriptor */ +struct uac1_ac_header_descriptor { + __u8 bLength; /* 8 + n */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ + __le16 bcdADC; /* 0x0100 */ + __le16 wTotalLength; /* includes Unit and Terminal desc. */ + __u8 bInCollection; /* n */ + __u8 baInterfaceNr[]; /* [n] */ +} __attribute__ ((packed)); + +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac1_ac_header_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __le16 bcdADC; \ + __le16 wTotalLength; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 4.3.2.1 Input Terminal Descriptor */ +struct uac_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_INPUT_TERMINAL_SIZE 12 + +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* Terminals - control selectors */ + +#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct uac1_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.3.2.3 Mixer Unit Descriptor */ +struct uac_mixer_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 4] : + &desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.4 Selector Unit Descriptor */ +struct uac_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUintID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.5 Feature Unit Descriptor */ +struct uac_feature_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bSourceID; + __u8 bControlSize; + __u8 bmaControls[0]; /* variable length */ +} __attribute__((packed)); + +static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.6 Processing Unit Descriptors */ +struct uac_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u16 wProcessType; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 4] : + desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 5] : + &desc->baSourceID[desc->bNrInPins + 7]; +} + +static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return desc->baSourceID[desc->bNrInPins + control_size]; +} + +static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return &desc->baSourceID[desc->bNrInPins + control_size + 1]; +} + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct uac1_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define UAC_DT_AS_HEADER_SIZE 7 + +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 + +struct uac_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct uac_format_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +struct uac_format_type_i_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u8 bSubslotSize; + __u8 bBitResolution; + __u8 bHeaderLength; + __u8 bControlSize; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* Formats - Audio Data Format Type I Codes */ + +#define UAC_FORMAT_TYPE_II_MPEG 0x1001 +#define UAC_FORMAT_TYPE_II_AC3 0x1002 + +struct uac_format_type_ii_discrete_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __le16 wMaxBitRate; + __le16 wSamplesPerFrame; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__((packed)); + +struct uac_format_type_ii_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u16 wMaxBitRate; + __u16 wSamplesPerFrame; + __u8 bHeaderLength; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* type III */ +#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 + +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 +#define UAC_EXT_FORMAT_TYPE_I 0x81 +#define UAC_EXT_FORMAT_TYPE_II 0x82 +#define UAC_EXT_FORMAT_TYPE_III 0x83 + +struct uac_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +} __attribute__((packed)); +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* status word format (3.7.1.1) */ + +#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f +#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 + +#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) +#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) + +struct uac1_status_word { + __u8 bStatusType; + __u8 bOriginator; +} __attribute__((packed)); + + +#endif /* _UAPI__LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index 81a927930bf..81a927930bf 100644 --- a/include/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h diff --git a/include/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index 7692dc69ccf..7692dc69ccf 100644 --- a/include/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h new file mode 100644 index 00000000000..50598472dc4 --- /dev/null +++ b/include/uapi/linux/usb/ch9.h @@ -0,0 +1,993 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + */ + +#ifndef _UAPI__LINUX_USB_CH9_H +#define _UAPI__LINUX_USB_CH9_H + +#include <linux/types.h> /* __u8 etc */ +#include <asm/byteorder.h> /* le16_to_cpu */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +#define USB_SUBCLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return __le16_to_cpu(epd->wMaxPacketSize); +} + +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __le16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + +/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ +#define USB_SS_MULT(p) (1 + ((p) & 0x3)) + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of device-level capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +#define USB_DT_BOS_SIZE 5 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +/* USB 2.0 Extension descriptor */ +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __le32 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) +} __attribute__((packed)); + +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ +}; + + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) + */ +}; + +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + +#endif /* _UAPI__LINUX_USB_CH9_H */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h new file mode 100644 index 00000000000..d6b01283f85 --- /dev/null +++ b/include/uapi/linux/usb/functionfs.h @@ -0,0 +1,169 @@ +#ifndef _UAPI__LINUX_FUNCTIONFS_H__ +#define _UAPI__LINUX_FUNCTIONFS_H__ + + +#include <linux/types.h> +#include <linux/ioctl.h> + +#include <linux/usb/ch9.h> + + +enum { + FUNCTIONFS_DESCRIPTORS_MAGIC = 1, + FUNCTIONFS_STRINGS_MAGIC = 2 +}; + + +#ifndef __KERNEL__ + +/* Descriptor of an non-audio endpoint */ +struct usb_endpoint_descriptor_no_audio { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; +} __attribute__((packed)); + + +/* + * All numbers must be in little endian order. + */ + +struct usb_functionfs_descs_head { + __le32 magic; + __le32 length; + __le32 fs_count; + __le32 hs_count; +} __attribute__((packed)); + +/* + * Descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | fs_count | LE32 | number of full-speed descriptors | + * | 12 | hs_count | LE32 | number of high-speed descriptors | + * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * + * descs are just valid USB descriptors and have the following format: + * + * | off | name | type | description | + * |-----+-----------------+------+--------------------------| + * | 0 | bLength | U8 | length of the descriptor | + * | 1 | bDescriptorType | U8 | descriptor type | + * | 2 | payload | | descriptor's payload | + */ + +struct usb_functionfs_strings_head { + __le32 magic; + __le32 length; + __le32 str_count; + __le32 lang_count; +} __attribute__((packed)); + +/* + * Strings format: + * + * | off | name | type | description | + * |-----+------------+-----------------------+----------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | + * | 4 | length | LE32 | length of the data chunk | + * | 8 | str_count | LE32 | number of strings | + * | 12 | lang_count | LE32 | number of languages | + * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | + * + * For each language there is one stringtab entry (ie. there are lang_count + * stringtab entires). Each StringTab has following format: + * + * | off | name | type | description | + * |-----+---------+-------------------+------------------------------------| + * | 0 | lang | LE16 | language code | + * | 2 | strings | String[str_count] | array of strings in given language | + * + * For each string there is one strings entry (ie. there are str_count + * string entries). Each String is a NUL terminated string encoded in + * UTF-8. + */ + +#endif + + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_functionfs_event_type { + FUNCTIONFS_BIND, + FUNCTIONFS_UNBIND, + + FUNCTIONFS_ENABLE, + FUNCTIONFS_DISABLE, + + FUNCTIONFS_SETUP, + + FUNCTIONFS_SUSPEND, + FUNCTIONFS_RESUME +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_functionfs_event { + union { + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction */ + struct usb_ctrlrequest setup; + } __attribute__((packed)) u; + + /* enum usb_functionfs_event_type */ + __u8 type; + __u8 _pad[3]; +} __attribute__((packed)); + + +/* Endpoint ioctls */ +/* The same as in gadgetfs */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) + +/* Specific for functionfs */ + +/* + * Returns reverse mapping of an interface. Called on EP0. If there + * is no such interface returns -EDOM. If function is not active + * returns -ENODEV. + */ +#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) + +/* + * Returns real bEndpointAddress of an endpoint. If function is not + * active returns -ENODEV. + */ +#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) + + + +#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/include/linux/usb/g_printer.h b/include/uapi/linux/usb/g_printer.h index 6178fde50f7..6178fde50f7 100644 --- a/include/linux/usb/g_printer.h +++ b/include/uapi/linux/usb/g_printer.h diff --git a/include/linux/usb/gadgetfs.h b/include/uapi/linux/usb/gadgetfs.h index 0bb12e0d4f8..0bb12e0d4f8 100644 --- a/include/linux/usb/gadgetfs.h +++ b/include/uapi/linux/usb/gadgetfs.h diff --git a/include/linux/usb/midi.h b/include/uapi/linux/usb/midi.h index c8c52e3c91d..c8c52e3c91d 100644 --- a/include/linux/usb/midi.h +++ b/include/uapi/linux/usb/midi.h diff --git a/include/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h index c045ae12556..c045ae12556 100644 --- a/include/linux/usb/tmc.h +++ b/include/uapi/linux/usb/tmc.h diff --git a/include/linux/usb/video.h b/include/uapi/linux/usb/video.h index 3b3b95e01f7..3b3b95e01f7 100644 --- a/include/linux/usb/video.h +++ b/include/uapi/linux/usb/video.h diff --git a/include/xen/Kbuild b/include/xen/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 --- a/include/xen/Kbuild +++ /dev/null diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index aecee9d112c..694dcaf266e 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -170,7 +170,7 @@ gnttab_set_unmap_op(struct gnttab_unmap_grant_ref *unmap, phys_addr_t addr, unmap->dev_bus_addr = 0; } -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared); int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes, diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h index f9f8b975ae7..e40fae9bf11 100644 --- a/include/xen/interface/grant_table.h +++ b/include/xen/interface/grant_table.h @@ -310,7 +310,7 @@ struct gnttab_setup_table { uint32_t nr_frames; /* OUT parameters. */ int16_t status; /* GNTST_* */ - GUEST_HANDLE(ulong) frame_list; + GUEST_HANDLE(xen_pfn_t) frame_list; }; DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table); diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index b66d04ce695..90712e2072d 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -179,28 +179,8 @@ struct xen_add_to_physmap { }; DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); -/* - * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error - * code on failure. This call only works for auto-translated guests. - */ -#define XENMEM_translate_gpfn_list 8 -struct xen_translate_gpfn_list { - /* Which domain to translate for? */ - domid_t domid; - - /* Length of list. */ - xen_ulong_t nr_gpfns; - - /* List of GPFNs to translate. */ - GUEST_HANDLE(ulong) gpfn_list; - - /* - * Output list to contain MFN translations. May be the same as the input - * list (in which case each input GPFN is overwritten with the output MFN). - */ - GUEST_HANDLE(ulong) mfn_list; -}; -DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list); +/*** REMOVED ***/ +/*#define XENMEM_translate_gpfn_list 8*/ /* * Returns the pseudo-physical memory map as it was when the domain |