diff options
Diffstat (limited to 'include')
31 files changed, 646 insertions, 553 deletions
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index b550a27a704..720dfab7b15 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -5,6 +5,7 @@ #include <linux/list.h> #include <linux/seq_file.h> #include <linux/clk.h> +#include <linux/err.h> struct clk; @@ -30,6 +31,7 @@ struct clk { unsigned long rate; unsigned long flags; + unsigned long arch_flags; }; #define CLK_ALWAYS_ENABLED (1 << 0) @@ -41,14 +43,27 @@ void arch_init_clk_ops(struct clk_ops **, int type); /* arch/sh/kernel/cpu/clock.c */ int clk_init(void); -int __clk_enable(struct clk *); -void __clk_disable(struct clk *); - void clk_recalc_rate(struct clk *); int clk_register(struct clk *); void clk_unregister(struct clk *); +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + /* the exported API, in addition to clk_set_rate */ /** * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index 5fd5c89ef86..065306d376e 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -30,7 +30,6 @@ void flush_dcache_page(struct page *pg); #define flush_dcache_mmap_unlock(mapping) do { } while (0) void flush_icache_range(unsigned long start, unsigned long end); -void flush_cache_sigtramp(unsigned long addr); void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index da46e67ae26..c23af81c2e7 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -12,12 +12,16 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ defined(CONFIG_CPU_SUBTYPE_SH7366) #define FRQCR 0xa4150000 #define VCLKCR 0xa4150004 #define SCLKACR 0xa4150008 #define SCLKBCR 0xa415000c #define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h index d8f9872b0e2..efd511d0803 100644 --- a/include/asm-sh/device.h +++ b/include/asm-sh/device.h @@ -5,3 +5,8 @@ */ #include <asm-generic/device.h> +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 05092da1aa5..f01449a8d37 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -1,10 +1,15 @@ #ifndef __ASM_SH_ELF_H #define __ASM_SH_ELF_H +#include <linux/utsname.h> #include <asm/auxvec.h> #include <asm/ptrace.h> #include <asm/user.h> +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + /* SH (particularly SHcompact) relocation types */ #define R_SH_NONE 0 #define R_SH_DIR32 1 @@ -43,6 +48,28 @@ #define R_SH_RELATIVE 165 #define R_SH_GOTOFF 166 #define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + /* SHmedia relocs */ #define R_SH_IMM_LOW16 246 #define R_SH_IMM_LOW16_PCREL 247 @@ -77,9 +104,12 @@ typedef struct user_fpu_struct elf_fpregset_t; /* * This is used to ensure we don't load something for the wrong architecture. */ -#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) #define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This is the location that an ET_DYN program is loaded if exec'ed. Typical @@ -136,6 +166,27 @@ typedef struct user_fpu_struct elf_fpregset_t; _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) #endif #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index 7438d1e21bc..d557b00111b 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,7 +79,7 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) struct intc_mask_reg *ack_regs; unsigned int nr_ack_regs; #endif @@ -95,7 +95,7 @@ struct intc_desc symbol __initdata = { \ chipname, \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) #define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ mask_regs, prio_regs, sense_regs, ack_regs) \ struct intc_desc symbol __initdata = { \ diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 2329363afdc..10016e0f4a4 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -16,10 +16,6 @@ #include <asm/addrspace.h> /* GPIO */ -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - #define PORT_PACR 0xa4050100 #define PORT_PDCR 0xa4050106 #define PORT_PECR 0xa4050108 @@ -29,11 +25,16 @@ #define PORT_PLCR 0xa4050114 #define PORT_PMCR 0xa4050116 #define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 #define PORT_PWCR 0xa4050146 #define PORT_PXCR 0xa4050148 #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -48,6 +49,7 @@ #define PORT_PSELB 0xa4050150 #define PORT_PSELC 0xa4050152 #define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 #define PORT_HIZCRA 0xa4050158 #define PORT_HIZCRB 0xa405015a @@ -55,4 +57,9 @@ #define BSC_CS6ABCR 0xfec1001c +#include <asm/sh_mobile_lcdc.h> + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + #endif /* __ASM_SH_MIGOR_H */ diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h index eb0358c097d..fdcb93bc6d1 100644 --- a/include/asm-sh/mmu.h +++ b/include/asm-sh/mmu.h @@ -12,6 +12,10 @@ typedef struct { struct vm_list_struct *vmlist; unsigned long end_brk; #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; /* diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 87e812f68bb..8589a50febd 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,8 +27,9 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 -#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) #define cpu_asid(cpu, mm) \ diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 5dc01d2fcc4..77fb8bf02e4 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -12,6 +12,8 @@ # define PAGE_SHIFT 12 #elif defined(CONFIG_PAGE_SIZE_8KB) # define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 #elif defined(CONFIG_PAGE_SIZE_64KB) # define PAGE_SHIFT 16 #else diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h index cbc731d35c2..72ea209195b 100644 --- a/include/asm-sh/pgtable_32.h +++ b/include/asm-sh/pgtable_32.h @@ -102,7 +102,9 @@ #define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) /* Hardware flags, page size encoding */ -#if defined(CONFIG_X2TLB) +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) # if defined(CONFIG_PAGE_SIZE_4KB) # define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) # elif defined(CONFIG_PAGE_SIZE_8KB) diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index b7c7ce80f03..15d9f92ca38 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,6 +2,7 @@ #define __ASM_SH_PROCESSOR_H #include <asm/cpu-features.h> +#include <asm/segment.h> #ifndef __ASSEMBLY__ /* diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index c09305d6a9d..c6583f26707 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -28,6 +28,7 @@ struct sh_cpuinfo { unsigned int type; + int cut_major, cut_minor; unsigned long loops_per_jiffy; unsigned long asid_cache; @@ -113,10 +114,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - /* Count of active tasks with UBC settings */ extern int ubc_usercnt; diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 88a2edf8fa5..fc7fc685ba2 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -166,10 +166,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - #define INIT_MMAP \ { &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index 7d36dc3bee6..643ab5a7cf3 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -87,6 +87,11 @@ struct pt_dspregs { unsigned long mod; }; +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + #define PTRACE_GETDSPREGS 55 #define PTRACE_SETDSPREGS 56 #endif diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index bd2596c014a..eb23000e1bb 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -76,6 +76,23 @@ #define IRQ_CFCARD 7 #endif +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + +void init_se_IRQ(void); + #define __IO_PREFIX se #include <asm/io_generic.h> diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index e7914a54aa9..98458460e63 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -59,24 +59,91 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + #define __IO_PREFIX sh7343se #include <asm/io_generic.h> -/* External Multiplexed interrupts */ -#define PC_IRQ0 OFFCHIP_IRQ_BASE -#define PC_IRQ1 (PC_IRQ0 + 1) -#define PC_IRQ2 (PC_IRQ1 + 1) -#define PC_IRQ3 (PC_IRQ2 + 1) +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 -#define EXT_IRQ0 (PC_IRQ3 + 1) -#define EXT_IRQ1 (EXT_IRQ0 + 1) -#define EXT_IRQ2 (EXT_IRQ1 + 1) -#define EXT_IRQ3 (EXT_IRQ2 + 1) +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 -#define USB_IRQ0 (EXT_IRQ3 + 1) -#define USB_IRQ1 (USB_IRQ0 + 1) +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) -#define UART_IRQ0 (USB_IRQ1 + 1) -#define UART_IRQ1 (UART_IRQ0 + 1) +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); #endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h index 3690fe5857a..e971d9a82f4 100644 --- a/include/asm-sh/se7722.h +++ b/include/asm-sh/se7722.h @@ -55,10 +55,6 @@ #define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ /* GPIO */ -#define MSTPCR0 0xA4150030UL -#define MSTPCR1 0xA4150034UL -#define MSTPCR2 0xA4150038UL - #define FPGA_IN 0xb1840000UL #define FPGA_OUT 0xb1840004UL diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h index e417eab4c7d..5e2725f4ac4 100644 --- a/include/asm-sh/segment.h +++ b/include/asm-sh/segment.h @@ -1,6 +1,34 @@ #ifndef __ASM_SH_SEGMENT_H #define __ASM_SH_SEGMENT_H -/* Only here because we have some old header files that expect it.. */ +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_SEGMENT_H */ diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h new file mode 100644 index 00000000000..8750cc85297 --- /dev/null +++ b/include/asm-sh/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h new file mode 100644 index 00000000000..1ce27d5c749 --- /dev/null +++ b/include/asm-sh/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index e65b6b822cb..056d68cd210 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -148,14 +148,6 @@ extern unsigned long cached_to_uncached; extern struct dentry *sh_debugfs_root; -/* XXX - * disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT -void disable_hlt(void); -void enable_hlt(void); - -void default_idle(void); void per_cpu_trap_init(void); asmlinkage void break_point_trap(void); diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 5131e390752..eeb4c747119 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -38,6 +38,8 @@ struct thread_info { #define THREAD_SIZE_ORDER (1) #elif defined(CONFIG_PAGE_SIZE_8KB) #define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) #elif defined(CONFIG_PAGE_SIZE_64KB) #define THREAD_SIZE_ORDER (0) #else diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index 701ba84c704..327f7eb8976 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -40,6 +40,5 @@ struct sys_timer *get_sys_timer(void); /* arch/sh/kernel/time.c */ void handle_timer_tick(void); extern unsigned long sh_hpt_frequency; -extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index b3440c305b5..45c2c9b2993 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -1,12 +1,171 @@ #ifndef __ASM_SH_UACCESS_H #define __ASM_SH_UACCESS_H +#include <linux/errno.h> +#include <linux/sched.h> +#include <asm/segment.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + #ifdef CONFIG_SUPERH32 # include "uaccess_32.h" #else # include "uaccess_64.h" #endif +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { @@ -31,4 +190,67 @@ copy_to_user(void __user *to, const void *from, unsigned long n) return __copy_size; } +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + #endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 1e41fda74bd..892fd6dea9d 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -1,9 +1,8 @@ -/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $ - * +/* * User space memory access functions * * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * Based on: * MIPS implementation version 1.15 by @@ -13,115 +12,6 @@ #ifndef __ASM_SH_UACCESS_32_H #define __ASM_SH_UACCESS_32_H -#include <linux/errno.h> -#include <linux/sched.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) - -#if !defined(CONFIG_MMU) -/* NOMMU is always true */ -#define __addr_ok(addr) (1) - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - -/* - * __access_ok: Check if address with size is OK or not. - * - * If we don't have an MMU (or if its disabled) the only thing we really have - * to look out for is if the address resides somewhere outside of what - * available RAM we have. - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} -#else /* CONFIG_MMU */ -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - unsigned long flag, sum; - - __asm__("clrt\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "cmp/hi %4, %1\n\t" - "rotcl %0" - :"=&r" (flag), "=r" (sum) - :"1" (addr), "r" (size), - "r" (current_thread_info()->addr_limit.seg) - :"t"); - return flag == 0; -} -#endif /* CONFIG_MMU */ - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((unsigned long __force)(addr), (size))) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - #define __get_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ @@ -141,28 +31,7 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - +#ifdef CONFIG_MMU #define __get_user_asm(x, addr, err, insn) \ ({ \ __asm__ __volatile__( \ @@ -183,6 +52,16 @@ __asm__ __volatile__( \ ".previous" \ :"=&r" (err), "=&r" (x) \ :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ extern void __get_user_unknown(void); @@ -197,7 +76,8 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm(x, ptr, retval, "l"); \ + __put_user_asm((u32)x, ptr, \ + retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ @@ -207,45 +87,41 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ - __pu_err); \ - __pu_err; \ -}) - -#define __put_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err) \ - :"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err) \ - :"memory"); }) +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ #if defined(CONFIG_CPU_LITTLE_ENDIAN) #define __put_user_u64(val,addr,retval) \ @@ -295,40 +171,7 @@ __asm__ __volatile__( \ extern void __put_user_unknown(void); -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -static __inline__ int +static inline int __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) { __kernel_size_t res; @@ -367,37 +210,11 @@ __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __coun return res; } -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - /* * Return the size of a string (including the ending 0 even when we have * exceeded the maximum string length). */ -static __inline__ long __strnlen_user(const char __user *__s, long __n) +static inline long __strnlen_user(const char __user *__s, long __n) { unsigned long res; unsigned long __dummy; @@ -429,61 +246,4 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) return res; } -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static __inline__ long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - #endif /* __ASM_SH_UACCESS_32_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index a9b68d09484..81b3d515fcb 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -20,87 +20,6 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include <linux/errno.h> -#include <linux/sched.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0x80000000) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit=(x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1) - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) -#define __access_ok(addr,size) (__range_ok(addr,size) == 0) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As MIPS uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x,ptr,ret) ({ \ -if (put_user(x,ptr)) return ret; }) - -#define get_user_ret(x,ptr,ret) ({ \ -if (get_user(x,ptr)) return ret; }) - -#define __put_user_ret(x,ptr,ret) ({ \ -if (__put_user(x,ptr)) return ret; }) - -#define __get_user_ret(x,ptr,ret) ({ \ -if (__get_user(x,ptr)) return ret; }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) #define __get_user_size(x,ptr,size,retval) \ do { \ @@ -124,26 +43,6 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size((void *)&__gu_val, (long)(ptr), \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_addr = (long)(ptr); \ - long __gu_err = -EFAULT, __gu_val; \ - if (__access_ok(__gu_addr, (size))) \ - __get_user_size((void *)&__gu_val, __gu_addr, \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - extern long __get_user_asm_b(void *, long); extern long __get_user_asm_w(void *, long); extern long __get_user_asm_l(void *, long); @@ -171,115 +70,10 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __pu_val = (x); \ - __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - long __pu_addr = (long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - \ - if (__access_ok(__pu_addr, (size))) \ - __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\ - __pu_err; \ -}) - extern long __put_user_asm_b(void *, long); extern long __put_user_asm_w(void *, long); extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -/* XXX: should be such that: 4byte and the rest. */ -extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n); - -#define copy_to_user_ret(to,from,n,retval) ({ \ -if (copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_to_user_ret(to,from,n,retval) ({ \ -if (__copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define copy_from_user_ret(to,from,n,retval) ({ \ -if (copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_from_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_from_user_ret(to,from,n,retval) ({ \ -if (__copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* XXX: Not sure it works well.. - should be such that: 4byte clear and the rest. */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count); - -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * Return the size of a string (including the ending 0!) - */ -extern long __strnlen_user(const char *__s, long __n); - -static inline long strnlen_user(const char *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -#ifdef CONFIG_MMU -#define ARCH_HAS_SEARCH_EXTABLE -#endif - -/* Returns 0 if exception not found and fixup.unit otherwise. */ -extern unsigned long search_exception_table(unsigned long addr); -extern const struct exception_table_entry *search_exception_tables (unsigned long addr); - #endif /* __ASM_SH_UACCESS_64_H */ diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index 4b21f369c28..65be656ead7 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -1,5 +1,13 @@ -#ifdef CONFIG_SUPERH32 -# include "unistd_32.h" +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif #else -# include "unistd_64.h" +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif #endif diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h index 0b07212ec65..d52c000cf92 100644 --- a/include/asm-sh/unistd_32.h +++ b/include/asm-sh/unistd_32.h @@ -335,8 +335,14 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 -#define NR_syscalls 327 +#define NR_syscalls 333 #ifdef __KERNEL__ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h index 9d21eab5242..7c54e91753c 100644 --- a/include/asm-sh/unistd_64.h +++ b/include/asm-sh/unistd_64.h @@ -375,10 +375,16 @@ #define __NR_fallocate 352 #define __NR_timerfd_settime 353 #define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 #ifdef __KERNEL__ -#define NR_syscalls 353 +#define NR_syscalls 361 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/include/linux/maple.h b/include/linux/maple.h index d31e36ebb43..523a286bb47 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -61,8 +61,6 @@ struct maple_device { struct maple_driver { unsigned long function; - int (*connect) (struct maple_device * dev); - void (*disconnect) (struct maple_device * dev); struct device_driver drv; }; |