7 files changed, 40 insertions, 102 deletions
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 0618ca386ab..158deea39a5 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -59,8 +59,6 @@ unifdef-y += siginfo_32.h
 unifdef-y += siginfo_64.h
 unifdef-y += signal_32.h
 unifdef-y += signal_64.h
-unifdef-y += sockios_32.h
-unifdef-y += sockios_64.h
 unifdef-y += stat_32.h
 unifdef-y += stat_64.h
 unifdef-y += statfs_32.h
diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
index cf1b05227b2..628c801535e 100644
--- a/include/asm-x86/serial.h
+++ b/include/asm-x86/serial.h
@@ -1,5 +1,29 @@
-#ifdef CONFIG_X86_32
-# include "serial_32.h"
+#ifndef _ASM_X86_SERIAL_H
+#define _ASM_X86_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
-# include "serial_64.h"
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+#endif /* _ASM_X86_SERIAL_H */
diff --git a/include/asm-x86/serial_32.h b/include/asm-x86/serial_32.h
deleted file mode 100644
index bd67480ca10..00000000000
--- a/include/asm-x86/serial_32.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-i386/serial.h
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
diff --git a/include/asm-x86/serial_64.h b/include/asm-x86/serial_64.h
deleted file mode 100644
index b0496e0d72a..00000000000
--- a/include/asm-x86/serial_64.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-x86_64/serial.h
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
diff --git a/include/asm-x86/sockios.h b/include/asm-x86/sockios.h
index 5a134fc70b9..49cc72b5d3c 100644
--- a/include/asm-x86/sockios.h
+++ b/include/asm-x86/sockios.h
@@ -1,13 +1,13 @@
-#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-#  include "sockios_32.h"
-# else
-#  include "sockios_64.h"
-# endif
-#else
-# ifdef __i386__
-#  include "sockios_32.h"
-# else
-#  include "sockios_64.h"
-# endif
-#endif
+#ifndef _ASM_X86_SOCKIOS_H
+#define _ASM_X86_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_X86_SOCKIOS_H */
diff --git a/include/asm-x86/sockios_32.h b/include/asm-x86/sockios_32.h
deleted file mode 100644
index ff528c7d255..00000000000
--- a/include/asm-x86/sockios_32.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_I386_SOCKIOS__
-#define __ARCH_I386_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/include/asm-x86/sockios_64.h b/include/asm-x86/sockios_64.h
deleted file mode 100644
index d726ba2513e..00000000000
--- a/include/asm-x86/sockios_64.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_X8664_SOCKIOS__
-#define __ARCH_X8664_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif