diff options
Diffstat (limited to 'include')
112 files changed, 6917 insertions, 1032 deletions
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h deleted file mode 100644 index 5106acaa1d0..00000000000 --- a/include/asm-arm/plat-s3c/iic.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/iic.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - I2C Controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IIC_H -#define __ASM_ARCH_IIC_H __FILE__ - -#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ - -/* Notes: - * 1) All frequencies are expressed in Hz - * 2) A value of zero is `do not care` -*/ - -struct s3c2410_platform_i2c { - int bus_num; /* bus number to use */ - unsigned int flags; - unsigned int slave_addr; /* slave address for controller */ - unsigned long bus_freq; /* standard bus frequency */ - unsigned long max_freq; /* max frequency for the bus */ - unsigned long min_freq; /* min frequency for the bus */ - unsigned int sda_delay; /* pclks (s3c2440 only) */ -}; - -#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h deleted file mode 100644 index f4dcd14af05..00000000000 --- a/include/asm-arm/plat-s3c/nand.h +++ /dev/null @@ -1,50 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/nand.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* struct s3c2410_nand_set - * - * define an set of one or more nand chips registered with an unique mtd - * - * nr_chips = number of chips in this set - * nr_partitions = number of partitions pointed to be partitoons (or zero) - * name = name of set (optional) - * nr_map = map for low-layer logical to physical chip numbers (option) - * partitions = mtd partition list -*/ - -struct s3c2410_nand_set { - unsigned int disable_ecc : 1; - - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; - struct nand_ecclayout *ecc_layout; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - unsigned int ignore_unset_ecc : 1; - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h deleted file mode 100644 index c3878f7acb8..00000000000 --- a/include/asm-arm/plat-s3c/regs-ac97.h +++ /dev/null @@ -1,67 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h - * - * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 AC97 Controller -*/ - -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H __FILE__ - -#define S3C_AC97_GLBCTRL (0x00) - -#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) -#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) -#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) -#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) -#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) -#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) -#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) -#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) -#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) -#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) -#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) -#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) -#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) -#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) -#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) -#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) -#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) - -#define S3C_AC97_GLBSTAT (0x04) - -#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) -#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) -#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) -#define S3C_AC97_GLBSTAT_MICINORI (1<<19) -#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) -#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) -#define S3C_AC97_GLBSTAT_MICINTI (1<<16) -#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) - -#define S3C_AC97_CODEC_CMD (0x08) - -#define S3C_AC97_CODEC_CMD_READ (1<<23) - -#define S3C_AC97_STAT (0x0c) -#define S3C_AC97_PCM_ADDR (0x10) -#define S3C_AC97_PCM_DATA (0x18) -#define S3C_AC97_MIC_DATA (0x1C) - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h deleted file mode 100644 index 2f7c17de8ac..00000000000 --- a/include/asm-arm/plat-s3c/regs-iic.h +++ /dev/null @@ -1,56 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 I2C Controller -*/ - -#ifndef __ASM_ARCH_REGS_IIC_H -#define __ASM_ARCH_REGS_IIC_H __FILE__ - -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ - -#define S3C2410_IICREG(x) (x) - -#define S3C2410_IICCON S3C2410_IICREG(0x00) -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) -#define S3C2410_IICADD S3C2410_IICREG(0x08) -#define S3C2410_IICDS S3C2410_IICREG(0x0C) -#define S3C2440_IICLC S3C2410_IICREG(0x10) - -#define S3C2410_IICCON_ACKEN (1<<7) -#define S3C2410_IICCON_TXDIV_16 (0<<6) -#define S3C2410_IICCON_TXDIV_512 (1<<6) -#define S3C2410_IICCON_IRQEN (1<<5) -#define S3C2410_IICCON_IRQPEND (1<<4) -#define S3C2410_IICCON_SCALE(x) ((x)&15) -#define S3C2410_IICCON_SCALEMASK (0xf) - -#define S3C2410_IICSTAT_MASTER_RX (2<<6) -#define S3C2410_IICSTAT_MASTER_TX (3<<6) -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) -#define S3C2410_IICSTAT_MODEMASK (3<<6) - -#define S3C2410_IICSTAT_START (1<<5) -#define S3C2410_IICSTAT_BUSBUSY (1<<5) -#define S3C2410_IICSTAT_TXRXEN (1<<4) -#define S3C2410_IICSTAT_ARBITR (1<<3) -#define S3C2410_IICSTAT_ASSLAVE (1<<2) -#define S3C2410_IICSTAT_ADDR0 (1<<1) -#define S3C2410_IICSTAT_LASTBIT (1<<0) - -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) - -#define S3C2410_IICLC_FILTER_ON (1<<2) - -#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h deleted file mode 100644 index b2caa4bca27..00000000000 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ /dev/null @@ -1,123 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-nand.h - * - * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 NAND register definitions -*/ - -#ifndef __ASM_ARM_REGS_NAND -#define __ASM_ARM_REGS_NAND - - -#define S3C2410_NFREG(x) (x) - -#define S3C2410_NFCONF S3C2410_NFREG(0x00) -#define S3C2410_NFCMD S3C2410_NFREG(0x04) -#define S3C2410_NFADDR S3C2410_NFREG(0x08) -#define S3C2410_NFDATA S3C2410_NFREG(0x0C) -#define S3C2410_NFSTAT S3C2410_NFREG(0x10) -#define S3C2410_NFECC S3C2410_NFREG(0x14) - -#define S3C2440_NFCONT S3C2410_NFREG(0x04) -#define S3C2440_NFCMD S3C2410_NFREG(0x08) -#define S3C2440_NFADDR S3C2410_NFREG(0x0C) -#define S3C2440_NFDATA S3C2410_NFREG(0x10) -#define S3C2440_NFECCD0 S3C2410_NFREG(0x14) -#define S3C2440_NFECCD1 S3C2410_NFREG(0x18) -#define S3C2440_NFECCD S3C2410_NFREG(0x1C) -#define S3C2440_NFSTAT S3C2410_NFREG(0x20) -#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24) -#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) -#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) -#define S3C2440_NFMECC1 S3C2410_NFREG(0x30) -#define S3C2440_NFSECC S3C2410_NFREG(0x34) -#define S3C2440_NFSBLK S3C2410_NFREG(0x38) -#define S3C2440_NFEBLK S3C2410_NFREG(0x3C) - -#define S3C2412_NFSBLK S3C2410_NFREG(0x20) -#define S3C2412_NFEBLK S3C2410_NFREG(0x24) -#define S3C2412_NFSTAT S3C2410_NFREG(0x28) -#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) -#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) -#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) -#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) -#define S3C2412_NFSECC S3C2410_NFREG(0x3C) - -#define S3C2410_NFCONF_EN (1<<15) -#define S3C2410_NFCONF_512BYTE (1<<14) -#define S3C2410_NFCONF_4STEP (1<<13) -#define S3C2410_NFCONF_INITECC (1<<12) -#define S3C2410_NFCONF_nFCE (1<<11) -#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) - -#define S3C2410_NFSTAT_BUSY (1<<0) - -#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0) -#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0) -#define S3C2440_NFCONF_ADVFLASH (1<<3) -#define S3C2440_NFCONF_TACLS(x) ((x)<<12) -#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) -#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) - -#define S3C2440_NFCONT_LOCKTIGHT (1<<13) -#define S3C2440_NFCONT_SOFTLOCK (1<<12) -#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10) -#define S3C2440_NFCONT_RNBINT_EN (1<<9) -#define S3C2440_NFCONT_RN_FALLING (1<<8) -#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6) -#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5) -#define S3C2440_NFCONT_INITECC (1<<4) -#define S3C2440_NFCONT_nFCE (1<<1) -#define S3C2440_NFCONT_ENABLE (1<<0) - -#define S3C2440_NFSTAT_READY (1<<0) -#define S3C2440_NFSTAT_nCE (1<<1) -#define S3C2440_NFSTAT_RnB_CHANGE (1<<2) -#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) - -#define S3C2412_NFCONF_NANDBOOT (1<<31) -#define S3C2412_NFCONF_ECCCLKCON (1<<30) -#define S3C2412_NFCONF_ECC_MLC (1<<24) -#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ - -#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) -#define S3C2412_NFCONT_LOCKTIGHT (1<<17) -#define S3C2412_NFCONT_SOFTLOCK (1<<16) -#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) -#define S3C2412_NFCONT_ECC4_DECINT (1<<12) -#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) -#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) -#define S3C2412_NFCONT_nFCE1 (1<<2) -#define S3C2412_NFCONT_nFCE0 (1<<1) - -#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) -#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) -#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) -#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) -#define S3C2412_NFSTAT_nFCE1 (1<<3) -#define S3C2412_NFSTAT_nFCE0 (1<<2) -#define S3C2412_NFSTAT_Res1 (1<<1) -#define S3C2412_NFSTAT_READY (1<<0) - -#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) -#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) -#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) -#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) -#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) -#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) -#define S3C2412_NFECCERR_NONE (0) -#define S3C2412_NFECCERR_1BIT (1) -#define S3C2412_NFECCERR_MULTIBIT (2) -#define S3C2412_NFECCERR_ECCAREA (3) - - - -#endif /* __ASM_ARM_REGS_NAND */ - diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h deleted file mode 100644 index d5837cf8e40..00000000000 --- a/include/asm-arm/plat-s3c/regs-rtc.h +++ /dev/null @@ -1,61 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1<<0) -#define S3C2410_RTCCON_CLKSEL (1<<1) -#define S3C2410_RTCCON_CNTSEL (1<<2) -#define S3C2410_RTCCON_CLKRST (1<<3) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1<<7) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1<<6) -#define S3C2410_RTCALM_YEAREN (1<<5) -#define S3C2410_RTCALM_MONEN (1<<4) -#define S3C2410_RTCALM_DAYEN (1<<3) -#define S3C2410_RTCALM_HOUREN (1<<2) -#define S3C2410_RTCALM_MINEN (1<<1) -#define S3C2410_RTCALM_SECEN (1<<0) - -#define S3C2410_RTCALM_ALL \ - S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ - S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ - S3C2410_RTCALM_SECEN - - -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) - - -#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h deleted file mode 100644 index 4938492470f..00000000000 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ /dev/null @@ -1,41 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Watchdog timer control -*/ - - -#ifndef __ASM_ARCH_REGS_WATCHDOG_H -#define __ASM_ARCH_REGS_WATCHDOG_H - -#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) - -#define S3C2410_WTCON S3C_WDOGREG(0x00) -#define S3C2410_WTDAT S3C_WDOGREG(0x04) -#define S3C2410_WTCNT S3C_WDOGREG(0x08) - -/* the watchdog can either generate a reset pulse, or an - * interrupt. - */ - -#define S3C2410_WTCON_RSTEN (0x01) -#define S3C2410_WTCON_INTEN (1<<2) -#define S3C2410_WTCON_ENABLE (1<<5) - -#define S3C2410_WTCON_DIV16 (0<<3) -#define S3C2410_WTCON_DIV32 (1<<3) -#define S3C2410_WTCON_DIV64 (2<<3) -#define S3C2410_WTCON_DIV128 (3<<3) - -#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) -#define S3C2410_WTCON_PRESCALE_MASK (0xff00) - -#endif /* __ASM_ARCH_REGS_WATCHDOG_H */ - - diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h deleted file mode 100644 index 2d0852ac3b2..00000000000 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ARCH_MCI_H -#define _ARCH_MCI_H - -struct s3c24xx_mci_pdata { - unsigned int wprotect_invert : 1; - unsigned int detect_invert : 1; /* set => detect active high. */ - - unsigned int gpio_detect; - unsigned int gpio_wprotect; - unsigned long ocr_avail; - void (*set_power)(unsigned char power_mode, - unsigned short vdd); -}; - -#endif /* _ARCH_NCI_H */ diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h deleted file mode 100644 index 2b35479ee35..00000000000 --- a/include/asm-arm/plat-s3c24xx/regs-spi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-spi.h - * - * Copyright (c) 2004 Fetron GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 SPI register definition -*/ - -#ifndef __ASM_ARCH_REGS_SPI_H -#define __ASM_ARCH_REGS_SPI_H - -#define S3C2410_SPI1 (0x20) -#define S3C2412_SPI1 (0x100) - -#define S3C2410_SPCON (0x00) - -#define S3C2412_SPCON_RXFIFO_RB2 (0<<14) -#define S3C2412_SPCON_RXFIFO_RB4 (1<<14) -#define S3C2412_SPCON_RXFIFO_RB12 (2<<14) -#define S3C2412_SPCON_RXFIFO_RB14 (3<<14) -#define S3C2412_SPCON_TXFIFO_RB2 (0<<12) -#define S3C2412_SPCON_TXFIFO_RB4 (1<<12) -#define S3C2412_SPCON_TXFIFO_RB12 (2<<12) -#define S3C2412_SPCON_TXFIFO_RB14 (3<<12) -#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */ -#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */ -#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */ -#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */ - -#define S3C2412_SPCON_DIRC_RX (1<<7) - -#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ -#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ -#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ -#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */ -#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select - 0: slave, 1: master */ -#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */ -#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */ - -#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */ -#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */ - -#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */ - - -#define S3C2410_SPSTA (0x04) - -#define S3C2412_SPSTA_RXFIFO_AE (1<<11) -#define S3C2412_SPSTA_TXFIFO_AE (1<<10) -#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9) -#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8) -#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7) -#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6) -#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5) -#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4) - -#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ -#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ -#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ -#define S3C2412_SPSTA_READY_ORG (1<<3) - -#define S3C2410_SPPIN (0x08) - -#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ -#define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */ -#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ - -#define S3C2410_SPPRE (0x0C) -#define S3C2410_SPTDAT (0x10) -#define S3C2410_SPRDAT (0x14) - -#define S3C2412_TXFIFO (0x18) -#define S3C2412_RXFIFO (0x18) -#define S3C2412_SPFIC (0x24) - - -#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h deleted file mode 100644 index f0dd4a41b37..00000000000 --- a/include/asm-arm/plat-s3c24xx/regs-udc.h +++ /dev/null @@ -1,153 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-udc.h - * - * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> - * - * This include file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. -*/ - -#ifndef __ASM_ARCH_REGS_UDC_H -#define __ASM_ARCH_REGS_UDC_H - -#define S3C2410_USBDREG(x) (x) - -#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) -#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) -#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) - -#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) -#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) - -#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) - -#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) -#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) - -#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) -#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) -#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) -#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) -#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) - -#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) -#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) -#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) -#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) -#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) -#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) - -#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) -#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) -#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) -#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) -#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) -#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) - -#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) -#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) -#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) -#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) -#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) -#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) - -#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) -#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) -#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) -#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) -#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) -#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) - -#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) - -/* indexed registers */ - -#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) - -#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) - -#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) -#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) - -#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) -#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) -#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) -#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) - -#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7) - -#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W -#define S3C2410_UDC_PWR_RESET (1<<3) // R -#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W -#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R -#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W - -#define S3C2410_UDC_PWR_DEFAULT 0x00 - -#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) -#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) -#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) -#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) -#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) - -#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) -#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) -#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) - -#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W -#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W -#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W -#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W -#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W - -#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W -#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W - - -#define S3C2410_UDC_INDEX_EP0 (0x00) -#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? -#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? -#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? -#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? - -#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W -#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) -#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W -#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) -#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) - -#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W -#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W -#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W - -#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W -#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) -#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W -#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W -#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R -#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) - -#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W -#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W - -#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) -#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) -#define S3C2410_UDC_EP0_CSR_DE (1<<3) -#define S3C2410_UDC_EP0_CSR_SE (1<<4) -#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) -#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) -#define S3C2410_UDC_EP0_CSR_SSE (1<<7) - -#define S3C2410_UDC_MAXP_8 (1<<0) -#define S3C2410_UDC_MAXP_16 (1<<1) -#define S3C2410_UDC_MAXP_32 (1<<2) -#define S3C2410_UDC_MAXP_64 (1<<3) - - -#endif diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h deleted file mode 100644 index 546bb4008f4..00000000000 --- a/include/asm-arm/plat-s3c24xx/udc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/udc.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); - unsigned int vbus_pin; - unsigned char vbus_pin_inverted; -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 4c794d73fb8..8af276361bf 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -41,15 +41,14 @@ struct bug_entry { #ifndef __WARN #ifndef __ASSEMBLY__ -extern void warn_on_slowpath(const char *file, const int line); extern void warn_slowpath(const char *file, const int line, const char *fmt, ...) __attribute__((format(printf, 3, 4))); #define WANT_WARN_ON_SLOWPATH #endif -#define __WARN() warn_on_slowpath(__FILE__, __LINE__) -#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg) +#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL) +#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg) #else -#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0) +#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0) #endif #ifndef WARN_ON diff --git a/include/drm/Kbuild b/include/drm/Kbuild index 82b6983b7fb..b940fdfa3b2 100644 --- a/include/drm/Kbuild +++ b/include/drm/Kbuild @@ -1,4 +1,4 @@ -unifdef-y += drm.h drm_sarea.h +unifdef-y += drm.h drm_sarea.h drm_mode.h unifdef-y += i810_drm.h unifdef-y += i830_drm.h unifdef-y += i915_drm.h diff --git a/include/drm/drm.h b/include/drm/drm.h index f46ba4b57da..32e5096554e 100644 --- a/include/drm/drm.h +++ b/include/drm/drm.h @@ -173,6 +173,7 @@ enum drm_map_type { _DRM_AGP = 3, /**< AGP/GART */ _DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */ _DRM_CONSISTENT = 5, /**< Consistent memory for PCI DMA */ + _DRM_GEM = 6, /**< GEM object */ }; /** @@ -598,6 +599,8 @@ struct drm_gem_open { uint64_t size; }; +#include "drm_mode.h" + #define DRM_IOCTL_BASE 'd' #define DRM_IO(nr) _IO(DRM_IOCTL_BASE,nr) #define DRM_IOR(nr,type) _IOR(DRM_IOCTL_BASE,nr,type) @@ -634,6 +637,9 @@ struct drm_gem_open { #define DRM_IOCTL_SET_SAREA_CTX DRM_IOW( 0x1c, struct drm_ctx_priv_map) #define DRM_IOCTL_GET_SAREA_CTX DRM_IOWR(0x1d, struct drm_ctx_priv_map) +#define DRM_IOCTL_SET_MASTER DRM_IO(0x1e) +#define DRM_IOCTL_DROP_MASTER DRM_IO(0x1f) + #define DRM_IOCTL_ADD_CTX DRM_IOWR(0x20, struct drm_ctx) #define DRM_IOCTL_RM_CTX DRM_IOWR(0x21, struct drm_ctx) #define DRM_IOCTL_MOD_CTX DRM_IOW( 0x22, struct drm_ctx) @@ -664,6 +670,24 @@ struct drm_gem_open { #define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, struct drm_update_draw) +#define DRM_IOCTL_MODE_GETRESOURCES DRM_IOWR(0xA0, struct drm_mode_card_res) +#define DRM_IOCTL_MODE_GETCRTC DRM_IOWR(0xA1, struct drm_mode_crtc) +#define DRM_IOCTL_MODE_SETCRTC DRM_IOWR(0xA2, struct drm_mode_crtc) +#define DRM_IOCTL_MODE_CURSOR DRM_IOWR(0xA3, struct drm_mode_cursor) +#define DRM_IOCTL_MODE_GETGAMMA DRM_IOWR(0xA4, struct drm_mode_crtc_lut) +#define DRM_IOCTL_MODE_SETGAMMA DRM_IOWR(0xA5, struct drm_mode_crtc_lut) +#define DRM_IOCTL_MODE_GETENCODER DRM_IOWR(0xA6, struct drm_mode_get_encoder) +#define DRM_IOCTL_MODE_GETCONNECTOR DRM_IOWR(0xA7, struct drm_mode_get_connector) +#define DRM_IOCTL_MODE_ATTACHMODE DRM_IOWR(0xA8, struct drm_mode_mode_cmd) +#define DRM_IOCTL_MODE_DETACHMODE DRM_IOWR(0xA9, struct drm_mode_mode_cmd) + +#define DRM_IOCTL_MODE_GETPROPERTY DRM_IOWR(0xAA, struct drm_mode_get_property) +#define DRM_IOCTL_MODE_SETPROPERTY DRM_IOWR(0xAB, struct drm_mode_connector_set_property) +#define DRM_IOCTL_MODE_GETPROPBLOB DRM_IOWR(0xAC, struct drm_mode_get_blob) +#define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xAD, struct drm_mode_fb_cmd) +#define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xAE, struct drm_mode_fb_cmd) +#define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xAF, unsigned int) + /** * Device specific ioctls should only be in their respective headers * The device specific ioctl range is from 0x40 to 0x99. diff --git a/include/drm/drmP.h b/include/drm/drmP.h index d5e8e5c8954..afb7858c068 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -105,6 +105,7 @@ struct drm_device; #define DRIVER_FB_DMA 0x400 #define DRIVER_IRQ_VBL2 0x800 #define DRIVER_GEM 0x1000 +#define DRIVER_MODESET 0x2000 /***********************************************************************/ /** \name Begin the DRM... */ @@ -238,11 +239,11 @@ struct drm_device; */ #define LOCK_TEST_WITH_RETURN( dev, file_priv ) \ do { \ - if ( !_DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ) || \ - dev->lock.file_priv != file_priv ) { \ + if (!_DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock) || \ + file_priv->master->lock.file_priv != file_priv) { \ DRM_ERROR( "%s called without lock held, held %d owner %p %p\n",\ - __func__, _DRM_LOCK_IS_HELD( dev->lock.hw_lock->lock ),\ - dev->lock.file_priv, file_priv ); \ + __func__, _DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock),\ + file_priv->master->lock.file_priv, file_priv); \ return -EINVAL; \ } \ } while (0) @@ -276,6 +277,7 @@ typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd, #define DRM_AUTH 0x1 #define DRM_MASTER 0x2 #define DRM_ROOT_ONLY 0x4 +#define DRM_CONTROL_ALLOW 0x8 struct drm_ioctl_desc { unsigned int cmd; @@ -379,21 +381,26 @@ struct drm_buf_entry { /** File private data */ struct drm_file { int authenticated; - int master; pid_t pid; uid_t uid; drm_magic_t magic; unsigned long ioctl_count; struct list_head lhead; struct drm_minor *minor; - int remove_auth_on_close; unsigned long lock_count; + /** Mapping of mm object handles to object pointers. */ struct idr object_idr; /** Lock for synchronization of access to object_idr. */ spinlock_t table_lock; + struct file *filp; void *driver_priv; + + int is_master; /* this file private is a master for a minor */ + struct drm_master *master; /* master this node is currently associated with + N.B. not always minor->master */ + struct list_head fbs; }; /** Wait queue */ @@ -523,6 +530,8 @@ struct drm_map_list { struct drm_hash_item hash; struct drm_map *map; /**< mapping */ uint64_t user_token; + struct drm_master *master; + struct drm_mm_node *file_offset_node; /**< fake offset */ }; typedef struct drm_map drm_local_map_t; @@ -563,6 +572,14 @@ struct drm_ati_pcigart_info { }; /** + * GEM specific mm private for tracking GEM objects + */ +struct drm_gem_mm { + struct drm_mm offset_manager; /**< Offset mgmt for buffer objects */ + struct drm_open_hash offset_hash; /**< User token hash table for maps */ +}; + +/** * This structure defines the drm_mm memory object, which will be used by the * DRM for its buffer objects. */ @@ -579,6 +596,9 @@ struct drm_gem_object { /** File representing the shmem storage */ struct file *filp; + /* Mapping info for this object */ + struct drm_map_list map_list; + /** * Size of the object, in bytes. Immutable over the object's * lifetime. @@ -612,6 +632,33 @@ struct drm_gem_object { void *driver_private; }; +#include "drm_crtc.h" + +/* per-master structure */ +struct drm_master { + + struct kref refcount; /* refcount for this master */ + + struct list_head head; /**< each minor contains a list of masters */ + struct drm_minor *minor; /**< link back to minor we are a master for */ + + char *unique; /**< Unique identifier: e.g., busid */ + int unique_len; /**< Length of unique field */ + int unique_size; /**< amount allocated */ + + int blocked; /**< Blocked due to VC switch? */ + + /** \name Authentication */ + /*@{ */ + struct drm_open_hash magiclist; + struct list_head magicfree; + /*@} */ + + struct drm_lock_data lock; /**< Information on hardware lock */ + + void *driver_priv; /**< Private structure for driver to use */ +}; + /** * DRM driver structure. This structure represent the common code for * a family of cards. There will one drm_device for each card present @@ -712,6 +759,10 @@ struct drm_driver { void (*set_version) (struct drm_device *dev, struct drm_set_version *sv); + /* Master routines */ + int (*master_create)(struct drm_device *dev, struct drm_master *master); + void (*master_destroy)(struct drm_device *dev, struct drm_master *master); + int (*proc_init)(struct drm_minor *minor); void (*proc_cleanup)(struct drm_minor *minor); @@ -724,6 +775,9 @@ struct drm_driver { int (*gem_init_object) (struct drm_gem_object *obj); void (*gem_free_object) (struct drm_gem_object *obj); + /* Driver private ops for this object */ + struct vm_operations_struct *gem_vm_ops; + int major; int minor; int patchlevel; @@ -737,10 +791,14 @@ struct drm_driver { int num_ioctls; struct file_operations fops; struct pci_driver pci_driver; + /* List of devices hanging off this driver */ + struct list_head device_list; }; #define DRM_MINOR_UNASSIGNED 0 #define DRM_MINOR_LEGACY 1 +#define DRM_MINOR_CONTROL 2 +#define DRM_MINOR_RENDER 3 /** * DRM minor structure. This structure represents a drm minor number. @@ -752,6 +810,9 @@ struct drm_minor { struct device kdev; /**< Linux device */ struct drm_device *dev; struct proc_dir_entry *dev_root; /**< proc directory entry */ + struct drm_master *master; /* currently active master for this node */ + struct list_head master_list; + struct drm_mode_group mode_group; }; /** @@ -759,13 +820,10 @@ struct drm_minor { * may contain multiple heads. */ struct drm_device { - char *unique; /**< Unique identifier: e.g., busid */ - int unique_len; /**< Length of unique field */ + struct list_head driver_item; /**< list of devices per driver */ char *devname; /**< For /proc/interrupts */ int if_version; /**< Highest interface version set */ - int blocked; /**< Blocked due to VC switch? */ - /** \name Locks */ /*@{ */ spinlock_t count_lock; /**< For inuse, drm_device::open_count, drm_device::buf_use */ @@ -788,12 +846,7 @@ struct drm_device { atomic_t counts[15]; /*@} */ - /** \name Authentication */ - /*@{ */ struct list_head filelist; - struct drm_open_hash magiclist; /**< magic hash table */ - struct list_head magicfree; - /*@} */ /** \name Memory management */ /*@{ */ @@ -810,7 +863,7 @@ struct drm_device { struct idr ctx_idr; struct list_head vmalist; /**< List of vmas (for debugging) */ - struct drm_lock_data lock; /**< Information on hardware lock */ + /*@} */ /** \name DMA queues (contexts) */ @@ -858,6 +911,7 @@ struct drm_device { int *vblank_enabled; /* so we don't call enable more than once per disable */ int *vblank_inmodeset; /* Display driver is setting mode */ + u32 *last_vblank_wait; /* Last vblank seqno waited per CRTC */ struct timer_list vblank_disable_timer; u32 max_vblank_count; /**< size of vblank counter register */ @@ -881,12 +935,15 @@ struct drm_device { struct drm_sg_mem *sg; /**< Scatter gather memory */ int num_crtcs; /**< Number of CRTCs on this device */ void *dev_private; /**< device private data */ + void *mm_private; + struct address_space *dev_mapping; struct drm_sigdata sigdata; /**< For block_all_signals */ sigset_t sigmask; struct drm_driver *driver; drm_local_map_t *agp_buffer_map; unsigned int agp_buffer_token; + struct drm_minor *control; /**< Control node for card */ struct drm_minor *primary; /**< render type primary screen head */ /** \name Drawable information */ @@ -895,6 +952,8 @@ struct drm_device { struct idr drw_idr; /*@} */ + struct drm_mode_config mode_config; /**< Current mode config */ + /** \name GEM information */ /*@{ */ spinlock_t object_name_lock; @@ -997,6 +1056,8 @@ extern int drm_release(struct inode *inode, struct file *filp); /* Mapping support (drm_vm.h) */ extern int drm_mmap(struct file *filp, struct vm_area_struct *vma); +extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma); +extern void drm_vm_open_locked(struct vm_area_struct *vma); extern unsigned long drm_core_get_map_ofs(struct drm_map * map); extern unsigned long drm_core_get_reg_ofs(struct drm_device *dev); extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait); @@ -1153,6 +1214,8 @@ extern int drm_vblank_get(struct drm_device *dev, int crtc); extern void drm_vblank_put(struct drm_device *dev, int crtc); extern void drm_vblank_cleanup(struct drm_device *dev); /* Modesetting support */ +extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc); +extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc); extern int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -1189,6 +1252,13 @@ extern int drm_agp_unbind_memory(DRM_AGP_MEM * handle); extern void drm_agp_chipset_flush(struct drm_device *dev); /* Stub support (drm_stub.h) */ +extern int drm_setmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +extern int drm_dropmaster_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +struct drm_master *drm_master_create(struct drm_minor *minor); +extern struct drm_master *drm_master_get(struct drm_master *master); +extern void drm_master_put(struct drm_master **master); extern int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, struct drm_driver *driver); extern int drm_put_dev(struct drm_device *dev); @@ -1231,7 +1301,11 @@ struct drm_sysfs_class; extern struct class *drm_sysfs_create(struct module *owner, char *name); extern void drm_sysfs_destroy(void); extern int drm_sysfs_device_add(struct drm_minor *minor); +extern void drm_sysfs_hotplug_event(struct drm_device *dev); extern void drm_sysfs_device_remove(struct drm_minor *minor); +extern char *drm_get_connector_status_name(enum drm_connector_status status); +extern int drm_sysfs_connector_add(struct drm_connector *connector); +extern void drm_sysfs_connector_remove(struct drm_connector *connector); /* * Basic memory manager support (drm_mm.c) @@ -1251,10 +1325,12 @@ extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size); /* Graphics Execution Manager library functions (drm_gem.c) */ int drm_gem_init(struct drm_device *dev); +void drm_gem_destroy(struct drm_device *dev); void drm_gem_object_free(struct kref *kref); struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev, size_t size); void drm_gem_object_handle_free(struct kref *kref); +int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma); static inline void drm_gem_object_reference(struct drm_gem_object *obj) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h new file mode 100644 index 00000000000..0acb07f31fa --- /dev/null +++ b/include/drm/drm_crtc.h @@ -0,0 +1,733 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007-2008 Dave Airlie + * Copyright © 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#ifndef __DRM_CRTC_H__ +#define __DRM_CRTC_H__ + +#include <linux/i2c.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/idr.h> + +#include <linux/fb.h> + +struct drm_device; +struct drm_mode_set; +struct drm_framebuffer; + + +#define DRM_MODE_OBJECT_CRTC 0xcccccccc +#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 +#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0 +#define DRM_MODE_OBJECT_MODE 0xdededede +#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 +#define DRM_MODE_OBJECT_FB 0xfbfbfbfb +#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb + +struct drm_mode_object { + uint32_t id; + uint32_t type; +}; + +/* + * Note on terminology: here, for brevity and convenience, we refer to connector + * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, + * DVI, etc. And 'screen' refers to the whole of the visible display, which + * may span multiple monitors (and therefore multiple CRTC and connector + * structures). + */ + +enum drm_mode_status { + MODE_OK = 0, /* Mode OK */ + MODE_HSYNC, /* hsync out of range */ + MODE_VSYNC, /* vsync out of range */ + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_BAD_WIDTH, /* requires an unsupported linepitch */ + MODE_NOMODE, /* no mode with a maching name */ + MODE_NO_INTERLACE, /* interlaced mode not supported */ + MODE_NO_DBLESCAN, /* doublescan mode not supported */ + MODE_NO_VSCAN, /* multiscan mode not supported */ + MODE_MEM, /* insufficient video memory */ + MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ + MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ + MODE_MEM_VIRT, /* insufficient video memory given virtual size */ + MODE_NOCLOCK, /* no fixed clock available */ + MODE_CLOCK_HIGH, /* clock required is too high */ + MODE_CLOCK_LOW, /* clock required is too low */ + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ + MODE_BAD_HVALUE, /* horizontal timing was out of range */ + MODE_BAD_VVALUE, /* vertical timing was out of range */ + MODE_BAD_VSCAN, /* VScan value out of range */ + MODE_HSYNC_NARROW, /* horizontal sync too narrow */ + MODE_HSYNC_WIDE, /* horizontal sync too wide */ + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ + MODE_HBLANK_WIDE, /* horizontal blanking too wide */ + MODE_VSYNC_NARROW, /* vertical sync too narrow */ + MODE_VSYNC_WIDE, /* vertical sync too wide */ + MODE_VBLANK_NARROW, /* vertical blanking too narrow */ + MODE_VBLANK_WIDE, /* vertical blanking too wide */ + MODE_PANEL, /* exceeds panel dimensions */ + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ + MODE_ONE_WIDTH, /* only one width is supported */ + MODE_ONE_HEIGHT, /* only one height is supported */ + MODE_ONE_SIZE, /* only one resolution is supported */ + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ + MODE_UNVERIFIED = -3, /* mode needs to reverified */ + MODE_BAD = -2, /* unspecified reason */ + MODE_ERROR = -1 /* error condition */ +}; + +#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ + DRM_MODE_TYPE_CRTC_C) + +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ + .name = nm, .status = 0, .type = (t), .clock = (c), \ + .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ + .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ + .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ + .vscan = (vs), .flags = (f), .vrefresh = 0 + +#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ + +struct drm_display_mode { + /* Header */ + struct list_head head; + struct drm_mode_object base; + + char name[DRM_DISPLAY_MODE_LEN]; + + int connector_count; + enum drm_mode_status status; + int type; + + /* Proposed mode values */ + int clock; + int hdisplay; + int hsync_start; + int hsync_end; + int htotal; + int hskew; + int vdisplay; + int vsync_start; + int vsync_end; + int vtotal; + int vscan; + unsigned int flags; + + /* Addressable image size (may be 0 for projectors, etc.) */ + int width_mm; + int height_mm; + + /* Actual mode we give to hw */ + int clock_index; + int synth_clock; + int crtc_hdisplay; + int crtc_hblank_start; + int crtc_hblank_end; + int crtc_hsync_start; + int crtc_hsync_end; + int crtc_htotal; + int crtc_hskew; + int crtc_vdisplay; + int crtc_vblank_start; + int crtc_vblank_end; + int crtc_vsync_start; + int crtc_vsync_end; + int crtc_vtotal; + int crtc_hadjusted; + int crtc_vadjusted; + + /* Driver private mode info */ + int private_size; + int *private; + int private_flags; + + int vrefresh; + float hsync; +}; + +enum drm_connector_status { + connector_status_connected = 1, + connector_status_disconnected = 2, + connector_status_unknown = 3, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + + +/* + * Describes a given display (e.g. CRT or flat panel) and its limitations. + */ +struct drm_display_info { + char name[DRM_DISPLAY_INFO_LEN]; + /* Input info */ + bool serration_vsync; + bool sync_on_green; + bool composite_sync; + bool separate_syncs; + bool blank_to_black; + unsigned char video_level; + bool digital; + /* Physical size */ + unsigned int width_mm; + unsigned int height_mm; + + /* Display parameters */ + unsigned char gamma; /* FIXME: storage format */ + bool gtf_supported; + bool standard_color; + enum { + monochrome = 0, + rgb, + other, + unknown, + } display_type; + bool active_off_supported; + bool suspend_supported; + bool standby_supported; + + /* Color info FIXME: storage format */ + unsigned short redx, redy; + unsigned short greenx, greeny; + unsigned short bluex, bluey; + unsigned short whitex, whitey; + + /* Clock limits FIXME: storage format */ + unsigned int min_vfreq, max_vfreq; + unsigned int min_hfreq, max_hfreq; + unsigned int pixel_clock; + + /* White point indices FIXME: storage format */ + unsigned int wpx1, wpy1; + unsigned int wpgamma1; + unsigned int wpx2, wpy2; + unsigned int wpgamma2; + + enum subpixel_order subpixel_order; + + char *raw_edid; /* if any */ +}; + +struct drm_framebuffer_funcs { + void (*destroy)(struct drm_framebuffer *framebuffer); + int (*create_handle)(struct drm_framebuffer *fb, + struct drm_file *file_priv, + unsigned int *handle); +}; + +struct drm_framebuffer { + struct drm_device *dev; + struct list_head head; + struct drm_mode_object base; + const struct drm_framebuffer_funcs *funcs; + unsigned int pitch; + unsigned int width; + unsigned int height; + /* depth can be 15 or 16 */ + unsigned int depth; + int bits_per_pixel; + int flags; + void *fbdev; + u32 pseudo_palette[17]; + struct list_head filp_head; +}; + +struct drm_property_blob { + struct drm_mode_object base; + struct list_head head; + unsigned int length; + void *data; +}; + +struct drm_property_enum { + uint64_t value; + struct list_head head; + char name[DRM_PROP_NAME_LEN]; +}; + +struct drm_property { + struct list_head head; + struct drm_mode_object base; + uint32_t flags; + char name[DRM_PROP_NAME_LEN]; + uint32_t num_values; + uint64_t *values; + + struct list_head enum_blob_list; +}; + +struct drm_crtc; +struct drm_connector; +struct drm_encoder; + +/** + * drm_crtc_funcs - control CRTCs for a given device + * @dpms: control display power levels + * @save: save CRTC state + * @resore: restore CRTC state + * @lock: lock the CRTC + * @unlock: unlock the CRTC + * @shadow_allocate: allocate shadow pixmap + * @shadow_create: create shadow pixmap for rotation support + * @shadow_destroy: free shadow pixmap + * @mode_fixup: fixup proposed mode + * @mode_set: set the desired mode on the CRTC + * @gamma_set: specify color ramp for CRTC + * @destroy: deinit and free object. + * + * The drm_crtc_funcs structure is the central CRTC management structure + * in the DRM. Each CRTC controls one or more connectors (note that the name + * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. + * connectors, not just CRTs). + * + * Each driver is responsible for filling out this structure at startup time, + * in addition to providing other modesetting features, like i2c and DDC + * bus accessors. + */ +struct drm_crtc_funcs { + /* Save CRTC state */ + void (*save)(struct drm_crtc *crtc); /* suspend? */ + /* Restore CRTC state */ + void (*restore)(struct drm_crtc *crtc); /* resume? */ + + /* cursor controls */ + int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, + uint32_t handle, uint32_t width, uint32_t height); + int (*cursor_move)(struct drm_crtc *crtc, int x, int y); + + /* Set gamma on the CRTC */ + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t size); + /* Object destroy routine */ + void (*destroy)(struct drm_crtc *crtc); + + int (*set_config)(struct drm_mode_set *set); +}; + +/** + * drm_crtc - central CRTC control structure + * @enabled: is this CRTC enabled? + * @x: x position on screen + * @y: y position on screen + * @desired_mode: new desired mode + * @desired_x: desired x for desired_mode + * @desired_y: desired y for desired_mode + * @funcs: CRTC control functions + * + * Each CRTC may have one or more connectors associated with it. This structure + * allows the CRTC to be controlled. + */ +struct drm_crtc { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + + /* framebuffer the connector is currently bound to */ + struct drm_framebuffer *fb; + + bool enabled; + + struct drm_display_mode mode; + + int x, y; + struct drm_display_mode *desired_mode; + int desired_x, desired_y; + const struct drm_crtc_funcs *funcs; + + /* CRTC gamma size for reporting to userspace */ + uint32_t gamma_size; + uint16_t *gamma_store; + + /* if you are using the helper */ + void *helper_private; +}; + + +/** + * drm_connector_funcs - control connectors on a given device + * @dpms: set power state (see drm_crtc_funcs above) + * @save: save connector state + * @restore: restore connector state + * @mode_valid: is this mode valid on the given connector? + * @mode_fixup: try to fixup proposed mode for this connector + * @mode_set: set this mode + * @detect: is this connector active? + * @get_modes: get mode list for this connector + * @set_property: property for this connector may need update + * @destroy: make object go away + * + * Each CRTC may have one or more connectors attached to it. The functions + * below allow the core DRM code to control connectors, enumerate available modes, + * etc. + */ +struct drm_connector_funcs { + void (*dpms)(struct drm_connector *connector, int mode); + void (*save)(struct drm_connector *connector); + void (*restore)(struct drm_connector *connector); + enum drm_connector_status (*detect)(struct drm_connector *connector); + void (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + int (*set_property)(struct drm_connector *connector, struct drm_property *property, + uint64_t val); + void (*destroy)(struct drm_connector *connector); +}; + +struct drm_encoder_funcs { + void (*destroy)(struct drm_encoder *encoder); +}; + +#define DRM_CONNECTOR_MAX_UMODES 16 +#define DRM_CONNECTOR_MAX_PROPERTY 16 +#define DRM_CONNECTOR_LEN 32 +#define DRM_CONNECTOR_MAX_ENCODER 2 + +/** + * drm_encoder - central DRM encoder structure + */ +struct drm_encoder { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + int encoder_type; + uint32_t possible_crtcs; + uint32_t possible_clones; + + struct drm_crtc *crtc; + const struct drm_encoder_funcs *funcs; + void *helper_private; +}; + +/** + * drm_connector - central DRM connector control structure + * @crtc: CRTC this connector is currently connected to, NULL if none + * @interlace_allowed: can this connector handle interlaced modes? + * @doublescan_allowed: can this connector handle doublescan? + * @available_modes: modes available on this connector (from get_modes() + user) + * @initial_x: initial x position for this connector + * @initial_y: initial y position for this connector + * @status: connector connected? + * @funcs: connector control functions + * + * Each connector may be connected to one or more CRTCs, or may be clonable by + * another connector if they can share a CRTC. Each connector also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_connector { + struct drm_device *dev; + struct device kdev; + struct device_attribute *attr; + struct list_head head; + + struct drm_mode_object base; + + int connector_type; + int connector_type_id; + bool interlace_allowed; + bool doublescan_allowed; + struct list_head modes; /* list of modes on this connector */ + + int initial_x, initial_y; + enum drm_connector_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + struct drm_display_info display_info; + const struct drm_connector_funcs *funcs; + + struct list_head user_modes; + struct drm_property_blob *edid_blob_ptr; + u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY]; + uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY]; + + void *helper_private; + + uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; + uint32_t force_encoder_id; + struct drm_encoder *encoder; /* currently active encoder */ +}; + +/** + * struct drm_mode_set + * + * Represents a single crtc the connectors that it drives with what mode + * and from which framebuffer it scans out from. + * + * This is used to set modes. + */ +struct drm_mode_set { + struct list_head head; + + struct drm_framebuffer *fb; + struct drm_crtc *crtc; + struct drm_display_mode *mode; + + uint32_t x; + uint32_t y; + + struct drm_connector **connectors; + size_t num_connectors; +}; + +/** + * struct drm_mode_config_funcs - configure CRTCs for a given screen layout + * @resize: adjust CRTCs as necessary for the proposed layout + * + * Currently only a resize hook is available. DRM will call back into the + * driver with a new screen width and height. If the driver can't support + * the proposed size, it can return false. Otherwise it should adjust + * the CRTC<->connector mappings as needed and update its view of the screen. + */ +struct drm_mode_config_funcs { + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd *mode_cmd); + int (*fb_changed)(struct drm_device *dev); +}; + +struct drm_mode_group { + uint32_t num_crtcs; + uint32_t num_encoders; + uint32_t num_connectors; + + /* list of object IDs for this group */ + uint32_t *id_list; +}; + +/** + * drm_mode_config - Mode configuration control structure + * + */ +struct drm_mode_config { + struct mutex mutex; /* protects configuration and IDR */ + struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ + /* this is limited to one for now */ + int num_fb; + struct list_head fb_list; + int num_connector; + struct list_head connector_list; + int num_encoder; + struct list_head encoder_list; + + int num_crtc; + struct list_head crtc_list; + + struct list_head property_list; + + /* in-kernel framebuffers - hung of filp_head in drm_framebuffer */ + struct list_head fb_kernel_list; + + int min_width, min_height; + int max_width, max_height; + struct drm_mode_config_funcs *funcs; + unsigned long fb_base; + + /* pointers to standard properties */ + struct list_head property_blob_list; + struct drm_property *edid_property; + struct drm_property *dpms_property; + + /* DVI-I properties */ + struct drm_property *dvi_i_subconnector_property; + struct drm_property *dvi_i_select_subconnector_property; + + /* TV properties */ + struct drm_property *tv_subconnector_property; + struct drm_property *tv_select_subconnector_property; + struct drm_property *tv_mode_property; + struct drm_property *tv_left_margin_property; + struct drm_property *tv_right_margin_property; + struct drm_property *tv_top_margin_property; + struct drm_property *tv_bottom_margin_property; + + /* Optional properties */ + struct drm_property *scaling_mode_property; + struct drm_property *dithering_mode_property; +}; + +#define obj_to_crtc(x) container_of(x, struct drm_crtc, base) +#define obj_to_connector(x) container_of(x, struct drm_connector, base) +#define obj_to_encoder(x) container_of(x, struct drm_encoder, base) +#define obj_to_mode(x) container_of(x, struct drm_display_mode, base) +#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) +#define obj_to_property(x) container_of(x, struct drm_property, base) +#define obj_to_blob(x) container_of(x, struct drm_property_blob, base) + + +extern void drm_crtc_init(struct drm_device *dev, + struct drm_crtc *crtc, + const struct drm_crtc_funcs *funcs); +extern void drm_crtc_cleanup(struct drm_crtc *crtc); + +extern void drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); + +extern void drm_connector_cleanup(struct drm_connector *connector); + +extern void drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type); + +extern void drm_encoder_cleanup(struct drm_encoder *encoder); + +extern char *drm_get_connector_name(struct drm_connector *connector); +extern char *drm_get_dpms_name(int val); +extern char *drm_get_dvi_i_subconnector_name(int val); +extern char *drm_get_dvi_i_select_name(int val); +extern char *drm_get_tv_subconnector_name(int val); +extern char *drm_get_tv_select_name(int val); +extern void drm_fb_release(struct file *filp); +extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group); +extern struct edid *drm_get_edid(struct drm_connector *connector, + struct i2c_adapter *adapter); +extern unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter); +extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); +extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); +extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode); +extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, + struct drm_display_mode *mode); +extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode); +extern void drm_mode_config_init(struct drm_device *dev); +extern void drm_mode_config_cleanup(struct drm_device *dev); +extern void drm_mode_set_name(struct drm_display_mode *mode); +extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2); +extern int drm_mode_width(struct drm_display_mode *mode); +extern int drm_mode_height(struct drm_display_mode *mode); + +/* for us by fb module */ +extern int drm_mode_attachmode_crtc(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_display_mode *mode); +extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode); + +extern struct drm_display_mode *drm_mode_create(struct drm_device *dev); +extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); +extern void drm_mode_list_concat(struct list_head *head, + struct list_head *new); +extern void drm_mode_validate_size(struct drm_device *dev, + struct list_head *mode_list, + int maxX, int maxY, int maxPitch); +extern void drm_mode_prune_invalid(struct drm_device *dev, + struct list_head *mode_list, bool verbose); +extern void drm_mode_sort(struct list_head *mode_list); +extern int drm_mode_vrefresh(struct drm_display_mode *mode); +extern void drm_mode_set_crtcinfo(struct drm_display_mode *p, + int adjust_flags); +extern void drm_mode_connector_list_update(struct drm_connector *connector); +extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, + struct edid *edid); +extern int drm_connector_property_set_value(struct drm_connector *connector, + struct drm_property *property, + uint64_t value); +extern int drm_connector_property_get_value(struct drm_connector *connector, + struct drm_property *property, + uint64_t *value); +extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev); +extern void drm_framebuffer_set_object(struct drm_device *dev, + unsigned long handle); +extern int drm_framebuffer_init(struct drm_device *dev, + struct drm_framebuffer *fb, + const struct drm_framebuffer_funcs *funcs); +extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb); +extern int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc); +extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb); +extern void drm_crtc_probe_connector_modes(struct drm_device *dev, int maxX, int maxY); +extern bool drm_crtc_in_use(struct drm_crtc *crtc); + +extern int drm_connector_attach_property(struct drm_connector *connector, + struct drm_property *property, uint64_t init_val); +extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, + const char *name, int num_values); +extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); +extern int drm_property_add_enum(struct drm_property *property, int index, + uint64_t value, const char *name); +extern int drm_mode_create_dvi_i_properties(struct drm_device *dev); +extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats, + char *formats[]); +extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); +extern int drm_mode_create_dithering_property(struct drm_device *dev); +extern char *drm_get_encoder_name(struct drm_encoder *encoder); + +extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); +extern void drm_mode_connector_detach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); +extern bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, + int gamma_size); +extern void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type); +/* IOCTLs */ +extern int drm_mode_getresources(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +extern int drm_mode_getcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getconnector(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_setcrtc(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_cursor_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_addfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_rmfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getfb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_addmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_rmmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_attachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_detachmode_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +extern int drm_mode_getproperty_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_hotplug_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_replacefb(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_getencoder(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +#endif /* __DRM_CRTC_H__ */ diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h new file mode 100644 index 00000000000..4bc04cf460a --- /dev/null +++ b/include/drm/drm_crtc_helper.h @@ -0,0 +1,124 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007-2008 Dave Airlie + * Copyright © 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The DRM mode setting helper functions are common code for drivers to use if + * they wish. Drivers are not forced to use this code in their + * implementations but it would be useful if they code they do use at least + * provides a consistent interface and operation to userspace + */ + +#ifndef __DRM_CRTC_HELPER_H__ +#define __DRM_CRTC_HELPER_H__ + +#include <linux/i2c.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/idr.h> + +#include <linux/fb.h> + +struct drm_crtc_helper_funcs { + /* + * Control power levels on the CRTC. If the mode passed in is + * unsupported, the provider must use the next lowest power level. + */ + void (*dpms)(struct drm_crtc *crtc, int mode); + void (*prepare)(struct drm_crtc *crtc); + void (*commit)(struct drm_crtc *crtc); + + /* Provider can fixup or change mode timings before modeset occurs */ + bool (*mode_fixup)(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + /* Actually set the mode */ + void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); + + /* Move the crtc on the current fb to the given position *optional* */ + void (*mode_set_base)(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb); +}; + +struct drm_encoder_helper_funcs { + void (*dpms)(struct drm_encoder *encoder, int mode); + void (*save)(struct drm_encoder *encoder); + void (*restore)(struct drm_encoder *encoder); + + bool (*mode_fixup)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + void (*prepare)(struct drm_encoder *encoder); + void (*commit)(struct drm_encoder *encoder); + void (*mode_set)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + /* detect for DAC style encoders */ + enum drm_connector_status (*detect)(struct drm_encoder *encoder, + struct drm_connector *connector); +}; + +struct drm_connector_helper_funcs { + int (*get_modes)(struct drm_connector *connector); + int (*mode_valid)(struct drm_connector *connector, + struct drm_display_mode *mode); + struct drm_encoder *(*best_encoder)(struct drm_connector *connector); +}; + +extern void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY); +extern void drm_helper_disable_unused_functions(struct drm_device *dev); +extern int drm_helper_hotplug_stage_two(struct drm_device *dev); +extern bool drm_helper_initial_config(struct drm_device *dev, bool can_grow); +extern int drm_crtc_helper_set_config(struct drm_mode_set *set); +extern bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode, + int x, int y, + struct drm_framebuffer *old_fb); +extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc); + +extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, + struct drm_mode_fb_cmd *mode_cmd); + +static inline void drm_crtc_helper_add(struct drm_crtc *crtc, + const struct drm_crtc_helper_funcs *funcs) +{ + crtc->helper_private = (void *)funcs; +} + +static inline void drm_encoder_helper_add(struct drm_encoder *encoder, + const struct drm_encoder_helper_funcs *funcs) +{ + encoder->helper_private = (void *)funcs; +} + +static inline void drm_connector_helper_add(struct drm_connector *connector, + const struct drm_connector_helper_funcs *funcs) +{ + connector->helper_private = (void *)funcs; +} + +extern int drm_helper_resume_force_mode(struct drm_device *dev); +#endif diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h new file mode 100644 index 00000000000..c707c15f516 --- /dev/null +++ b/include/drm/drm_edid.h @@ -0,0 +1,202 @@ +/* + * Copyright © 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#ifndef __DRM_EDID_H__ +#define __DRM_EDID_H__ + +#include <linux/types.h> + +#define EDID_LENGTH 128 +#define DDC_ADDR 0x50 + +#ifdef BIG_ENDIAN +#error "EDID structure is little endian, need big endian versions" +#else + +struct est_timings { + u8 t1; + u8 t2; + u8 mfg_rsvd; +} __attribute__((packed)); + +struct std_timing { + u8 hsize; /* need to multiply by 8 then add 248 */ + u8 vfreq:6; /* need to add 60 */ + u8 aspect_ratio:2; /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */ +} __attribute__((packed)); + +/* If detailed data is pixel timing */ +struct detailed_pixel_timing { + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_offset_lo; + u8 hsync_pulse_width_lo; + u8 vsync_pulse_width_lo:4; + u8 vsync_offset_lo:4; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; + u8 vsync_pulse_width_hi:2; + u8 vsync_offset_hi:2; + u8 width_mm_lo; + u8 height_mm_lo; + u8 height_mm_hi:4; + u8 width_mm_hi:4; + u8 hborder; + u8 vborder; + u8 unknown0:1; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 separate_sync:2; + u8 stereo:1; + u8 unknown6:1; + u8 interlaced:1; +} __attribute__((packed)); + +/* If it's not pixel timing, it'll be one of the below */ +struct detailed_data_string { + u8 str[13]; +} __attribute__((packed)); + +struct detailed_data_monitor_range { + u8 min_vfreq; + u8 max_vfreq; + u8 min_hfreq_khz; + u8 max_hfreq_khz; + u8 pixel_clock_mhz; /* need to multiply by 10 */ + u16 sec_gtf_toggle; /* A000=use above, 20=use below */ /* FIXME: byte order */ + u8 hfreq_start_khz; /* need to multiply by 2 */ + u8 c; /* need to divide by 2 */ + u16 m; /* FIXME: byte order */ + u8 k; + u8 j; /* need to divide by 2 */ +} __attribute__((packed)); + +struct detailed_data_wpindex { + u8 white_y_lo:2; + u8 white_x_lo:2; + u8 pad:4; + u8 white_x_hi; + u8 white_y_hi; + u8 gamma; /* need to divide by 100 then add 1 */ +} __attribute__((packed)); + +struct detailed_data_color_point { + u8 windex1; + u8 wpindex1[3]; + u8 windex2; + u8 wpindex2[3]; +} __attribute__((packed)); + +struct detailed_non_pixel { + u8 pad1; + u8 type; /* ff=serial, fe=string, fd=monitor range, fc=monitor name + fb=color point data, fa=standard timing data, + f9=undefined, f8=mfg. reserved */ + u8 pad2; + union { + struct detailed_data_string str; + struct detailed_data_monitor_range range; + struct detailed_data_wpindex color; + struct std_timing timings[5]; + } data; +} __attribute__((packed)); + +#define EDID_DETAIL_STD_MODES 0xfa +#define EDID_DETAIL_MONITOR_CPDATA 0xfb +#define EDID_DETAIL_MONITOR_NAME 0xfc +#define EDID_DETAIL_MONITOR_RANGE 0xfd +#define EDID_DETAIL_MONITOR_STRING 0xfe +#define EDID_DETAIL_MONITOR_SERIAL 0xff + +struct detailed_timing { + u16 pixel_clock; /* need to multiply by 10 KHz */ /* FIXME: byte order */ + union { + struct detailed_pixel_timing pixel_data; + struct detailed_non_pixel other_data; + } data; +} __attribute__((packed)); + +struct edid { + u8 header[8]; + /* Vendor & product info */ + u8 mfg_id[2]; + u8 prod_code[2]; + u32 serial; /* FIXME: byte order */ + u8 mfg_week; + u8 mfg_year; + /* EDID version */ + u8 version; + u8 revision; + /* Display info: */ + /* input definition */ + u8 serration_vsync:1; + u8 sync_on_green:1; + u8 composite_sync:1; + u8 separate_syncs:1; + u8 blank_to_black:1; + u8 video_level:2; + u8 digital:1; /* bits below must be zero if set */ + u8 width_cm; + u8 height_cm; + u8 gamma; + /* feature support */ + u8 default_gtf:1; + u8 preferred_timing:1; + u8 standard_color:1; + u8 display_type:2; /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */ + u8 pm_active_off:1; + u8 pm_suspend:1; + u8 pm_standby:1; + /* Color characteristics */ + u8 red_green_lo; + u8 black_white_lo; + u8 red_x; + u8 red_y; + u8 green_x; + u8 green_y; + u8 blue_x; + u8 blue_y; + u8 white_x; + u8 white_y; + /* Est. timings and mfg rsvd timings*/ + struct est_timings established_timings; + /* Standard timings 1-8*/ + struct std_timing standard_timings[8]; + /* Detailing timings 1-4 */ + struct detailed_timing detailed_timings[4]; + /* Number of 128 byte ext. blocks */ + u8 extensions; + /* Checksum */ + u8 checksum; +} __attribute__((packed)); + +#endif /* little endian structs */ + +#define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8)) + +#endif /* __DRM_EDID_H__ */ diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h new file mode 100644 index 00000000000..601d2bd839f --- /dev/null +++ b/include/drm/drm_mode.h @@ -0,0 +1,271 @@ +/* + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com> + * Copyright (c) 2008 Red Hat Inc. + * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA + * Copyright (c) 2007-2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _DRM_MODE_H +#define _DRM_MODE_H + +#if !defined(__KERNEL__) && !defined(_KERNEL) +#include <stdint.h> +#else +#include <linux/kernel.h> +#endif + +#define DRM_DISPLAY_INFO_LEN 32 +#define DRM_CONNECTOR_NAME_LEN 32 +#define DRM_DISPLAY_MODE_LEN 32 +#define DRM_PROP_NAME_LEN 32 + +#define DRM_MODE_TYPE_BUILTIN (1<<0) +#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_PREFERRED (1<<3) +#define DRM_MODE_TYPE_DEFAULT (1<<4) +#define DRM_MODE_TYPE_USERDEF (1<<5) +#define DRM_MODE_TYPE_DRIVER (1<<6) + +/* Video mode flags */ +/* bit compatible with the xorg definitions. */ +#define DRM_MODE_FLAG_PHSYNC (1<<0) +#define DRM_MODE_FLAG_NHSYNC (1<<1) +#define DRM_MODE_FLAG_PVSYNC (1<<2) +#define DRM_MODE_FLAG_NVSYNC (1<<3) +#define DRM_MODE_FLAG_INTERLACE (1<<4) +#define DRM_MODE_FLAG_DBLSCAN (1<<5) +#define DRM_MODE_FLAG_CSYNC (1<<6) +#define DRM_MODE_FLAG_PCSYNC (1<<7) +#define DRM_MODE_FLAG_NCSYNC (1<<8) +#define DRM_MODE_FLAG_HSKEW (1<<9) /* hskew provided */ +#define DRM_MODE_FLAG_BCAST (1<<10) +#define DRM_MODE_FLAG_PIXMUX (1<<11) +#define DRM_MODE_FLAG_DBLCLK (1<<12) +#define DRM_MODE_FLAG_CLKDIV2 (1<<13) + +/* DPMS flags */ +/* bit compatible with the xorg definitions. */ +#define DRM_MODE_DPMS_ON 0 +#define DRM_MODE_DPMS_STANDBY 1 +#define DRM_MODE_DPMS_SUSPEND 2 +#define DRM_MODE_DPMS_OFF 3 + +/* Scaling mode options */ +#define DRM_MODE_SCALE_NON_GPU 0 +#define DRM_MODE_SCALE_FULLSCREEN 1 +#define DRM_MODE_SCALE_NO_SCALE 2 +#define DRM_MODE_SCALE_ASPECT 3 + +/* Dithering mode options */ +#define DRM_MODE_DITHERING_OFF 0 +#define DRM_MODE_DITHERING_ON 1 + +struct drm_mode_modeinfo { + uint32_t clock; + uint16_t hdisplay, hsync_start, hsync_end, htotal, hskew; + uint16_t vdisplay, vsync_start, vsync_end, vtotal, vscan; + + uint32_t vrefresh; /* vertical refresh * 1000 */ + + uint32_t flags; + uint32_t type; + char name[DRM_DISPLAY_MODE_LEN]; +}; + +struct drm_mode_card_res { + uint64_t fb_id_ptr; + uint64_t crtc_id_ptr; + uint64_t connector_id_ptr; + uint64_t encoder_id_ptr; + uint32_t count_fbs; + uint32_t count_crtcs; + uint32_t count_connectors; + uint32_t count_encoders; + uint32_t min_width, max_width; + uint32_t min_height, max_height; +}; + +struct drm_mode_crtc { + uint64_t set_connectors_ptr; + uint32_t count_connectors; + + uint32_t crtc_id; /**< Id */ + uint32_t fb_id; /**< Id of framebuffer */ + + uint32_t x, y; /**< Position on the frameuffer */ + + uint32_t gamma_size; + uint32_t mode_valid; + struct drm_mode_modeinfo mode; +}; + +#define DRM_MODE_ENCODER_NONE 0 +#define DRM_MODE_ENCODER_DAC 1 +#define DRM_MODE_ENCODER_TMDS 2 +#define DRM_MODE_ENCODER_LVDS 3 +#define DRM_MODE_ENCODER_TVDAC 4 + +struct drm_mode_get_encoder { + uint32_t encoder_id; + uint32_t encoder_type; + + uint32_t crtc_id; /**< Id of crtc */ + + uint32_t possible_crtcs; + uint32_t possible_clones; +}; + +/* This is for connectors with multiple signal types. */ +/* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ +#define DRM_MODE_SUBCONNECTOR_Automatic 0 +#define DRM_MODE_SUBCONNECTOR_Unknown 0 +#define DRM_MODE_SUBCONNECTOR_DVID 3 +#define DRM_MODE_SUBCONNECTOR_DVIA 4 +#define DRM_MODE_SUBCONNECTOR_Composite 5 +#define DRM_MODE_SUBCONNECTOR_SVIDEO 6 +#define DRM_MODE_SUBCONNECTOR_Component 8 + +#define DRM_MODE_CONNECTOR_Unknown 0 +#define DRM_MODE_CONNECTOR_VGA 1 +#define DRM_MODE_CONNECTOR_DVII 2 +#define DRM_MODE_CONNECTOR_DVID 3 +#define DRM_MODE_CONNECTOR_DVIA 4 +#define DRM_MODE_CONNECTOR_Composite 5 +#define DRM_MODE_CONNECTOR_SVIDEO 6 +#define DRM_MODE_CONNECTOR_LVDS 7 +#define DRM_MODE_CONNECTOR_Component 8 +#define DRM_MODE_CONNECTOR_9PinDIN 9 +#define DRM_MODE_CONNECTOR_DisplayPort 10 +#define DRM_MODE_CONNECTOR_HDMIA 11 +#define DRM_MODE_CONNECTOR_HDMIB 12 + +struct drm_mode_get_connector { + + uint64_t encoders_ptr; + uint64_t modes_ptr; + uint64_t props_ptr; + uint64_t prop_values_ptr; + + uint32_t count_modes; + uint32_t count_props; + uint32_t count_encoders; + + uint32_t encoder_id; /**< Current Encoder */ + uint32_t connector_id; /**< Id */ + uint32_t connector_type; + uint32_t connector_type_id; + + uint32_t connection; + uint32_t mm_width, mm_height; /**< HxW in millimeters */ + uint32_t subpixel; +}; + +#define DRM_MODE_PROP_PENDING (1<<0) +#define DRM_MODE_PROP_RANGE (1<<1) +#define DRM_MODE_PROP_IMMUTABLE (1<<2) +#define DRM_MODE_PROP_ENUM (1<<3) /* enumerated type with text strings */ +#define DRM_MODE_PROP_BLOB (1<<4) + +struct drm_mode_property_enum { + uint64_t value; + char name[DRM_PROP_NAME_LEN]; +}; + +struct drm_mode_get_property { + uint64_t values_ptr; /* values and blob lengths */ + uint64_t enum_blob_ptr; /* enum and blob id ptrs */ + + uint32_t prop_id; + uint32_t flags; + char name[DRM_PROP_NAME_LEN]; + + uint32_t count_values; + uint32_t count_enum_blobs; +}; + +struct drm_mode_connector_set_property { + uint64_t value; + uint32_t prop_id; + uint32_t connector_id; +}; + +struct drm_mode_get_blob { + uint32_t blob_id; + uint32_t length; + uint64_t data; +}; + +struct drm_mode_fb_cmd { + uint32_t fb_id; + uint32_t width, height; + uint32_t pitch; + uint32_t bpp; + uint32_t depth; + /* driver specific handle */ + uint32_t handle; +}; + +struct drm_mode_mode_cmd { + uint32_t connector_id; + struct drm_mode_modeinfo mode; +}; + +#define DRM_MODE_CURSOR_BO (1<<0) +#define DRM_MODE_CURSOR_MOVE (1<<1) + +/* + * depending on the value in flags diffrent members are used. + * + * CURSOR_BO uses + * crtc + * width + * height + * handle - if 0 turns the cursor of + * + * CURSOR_MOVE uses + * crtc + * x + * y + */ +struct drm_mode_cursor { + uint32_t flags; + uint32_t crtc_id; + int32_t x; + int32_t y; + uint32_t width; + uint32_t height; + /* driver specific handle */ + uint32_t handle; +}; + +struct drm_mode_crtc_lut { + uint32_t crtc_id; + uint32_t gamma_size; + + /* pointers to arrays */ + uint64_t red; + uint64_t green; + uint64_t blue; +}; + +#endif diff --git a/include/drm/drm_sarea.h b/include/drm/drm_sarea.h index 480037331e4..ee5389d22c6 100644 --- a/include/drm/drm_sarea.h +++ b/include/drm/drm_sarea.h @@ -36,12 +36,12 @@ /* SAREA area needs to be at least a page */ #if defined(__alpha__) -#define SAREA_MAX 0x2000 +#define SAREA_MAX 0x2000U #elif defined(__ia64__) -#define SAREA_MAX 0x10000 /* 64kB */ +#define SAREA_MAX 0x10000U /* 64kB */ #else /* Intel 830M driver needs at least 8k SAREA */ -#define SAREA_MAX 0x2000 +#define SAREA_MAX 0x2000U #endif /** Maximum number of drawables in the SAREA */ diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 152b34da927..b3bcf72dc65 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -113,8 +113,31 @@ typedef struct _drm_i915_sarea { int pipeB_y; int pipeB_w; int pipeB_h; + + /* fill out some space for old userspace triple buffer */ + drm_handle_t unused_handle; + uint32_t unused1, unused2, unused3; + + /* buffer object handles for static buffers. May change + * over the lifetime of the client. + */ + uint32_t front_bo_handle; + uint32_t back_bo_handle; + uint32_t unused_bo_handle; + uint32_t depth_bo_handle; + } drm_i915_sarea_t; +/* due to userspace building against these headers we need some compat here */ +#define planeA_x pipeA_x +#define planeA_y pipeA_y +#define planeA_w pipeA_w +#define planeA_h pipeA_h +#define planeB_x pipeB_x +#define planeB_y pipeB_y +#define planeB_w pipeB_w +#define planeB_h pipeB_h + /* Flags for perf_boxes */ #define I915_BOX_RING_EMPTY 0x1 @@ -160,6 +183,7 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_SET_TILING 0x21 #define DRM_I915_GEM_GET_TILING 0x22 #define DRM_I915_GEM_GET_APERTURE 0x23 +#define DRM_I915_GEM_MMAP_GTT 0x24 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -177,6 +201,8 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t) #define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t) #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) +#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) +#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) #define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) #define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) #define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) @@ -187,6 +213,7 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread) #define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite) #define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap) +#define DRM_IOCTL_I915_GEM_MMAP_GTT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt) #define DRM_IOCTL_I915_GEM_SET_DOMAIN DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain) #define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) #define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) @@ -196,7 +223,7 @@ typedef struct _drm_i915_sarea { /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. */ -typedef struct _drm_i915_batchbuffer { +typedef struct drm_i915_batchbuffer { int start; /* agp offset */ int used; /* nr bytes in use */ int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ @@ -382,6 +409,18 @@ struct drm_i915_gem_mmap { uint64_t addr_ptr; }; +struct drm_i915_gem_mmap_gtt { + /** Handle for the object being mapped. */ + uint32_t handle; + uint32_t pad; + /** + * Fake offset to use for subsequent mmap call + * + * This is a fixed-size type for 32/64 compatibility. + */ + uint64_t offset; +}; + struct drm_i915_gem_set_domain { /** Handle for the object */ uint32_t handle; diff --git a/include/linux/Kbuild b/include/linux/Kbuild index e531783e5d7..95ac82340c3 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -313,6 +313,7 @@ unifdef-y += ptrace.h unifdef-y += qnx4_fs.h unifdef-y += quota.h unifdef-y += random.h +unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h unifdef-y += reiserfs_xattr.h diff --git a/include/linux/aio.h b/include/linux/aio.h index f6b8cf99b59..b16a957030f 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -5,6 +5,7 @@ #include <linux/workqueue.h> #include <linux/aio_abi.h> #include <linux/uio.h> +#include <linux/rcupdate.h> #include <asm/atomic.h> @@ -183,7 +184,7 @@ struct kioctx { /* This needs improving */ unsigned long user_id; - struct kioctx *next; + struct hlist_node list; wait_queue_head_t wait; @@ -199,6 +200,8 @@ struct kioctx { struct aio_ring_info ring_info; struct delayed_work wq; + + struct rcu_head rcu_head; }; /* prototypes */ diff --git a/include/linux/bio.h b/include/linux/bio.h index 6a642098e5c..18462c5b8ff 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -90,10 +90,11 @@ struct bio { unsigned int bi_comp_cpu; /* completion CPU */ + atomic_t bi_cnt; /* pin count */ + struct bio_vec *bi_io_vec; /* the actual vec list */ bio_end_io_t *bi_end_io; - atomic_t bi_cnt; /* pin count */ void *bi_private; #if defined(CONFIG_BLK_DEV_INTEGRITY) @@ -101,6 +102,13 @@ struct bio { #endif bio_destructor_t *bi_destructor; /* destructor */ + + /* + * We can inline a number of vecs at the end of the bio, to avoid + * double allocations for a small number of bio_vecs. This member + * MUST obviously be kept at the very end of the bio. + */ + struct bio_vec bi_inline_vecs[0]; }; /* @@ -117,6 +125,7 @@ struct bio { #define BIO_CPU_AFFINE 8 /* complete bio on same CPU as submitted */ #define BIO_NULL_MAPPED 9 /* contains invalid user pages */ #define BIO_FS_INTEGRITY 10 /* fs owns integrity data, not block layer */ +#define BIO_QUIET 11 /* Make BIO Quiet */ #define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag))) /* @@ -211,6 +220,11 @@ static inline void *bio_data(struct bio *bio) return NULL; } +static inline int bio_has_allocated_vec(struct bio *bio) +{ + return bio->bi_io_vec && bio->bi_io_vec != bio->bi_inline_vecs; +} + /* * will die */ @@ -332,7 +346,7 @@ struct bio_pair { extern struct bio_pair *bio_split(struct bio *bi, int first_sectors); extern void bio_pair_release(struct bio_pair *dbio); -extern struct bio_set *bioset_create(int, int); +extern struct bio_set *bioset_create(unsigned int, unsigned int); extern void bioset_free(struct bio_set *); extern struct bio *bio_alloc(gfp_t, int); @@ -377,6 +391,7 @@ extern struct bio *bio_copy_user_iov(struct request_queue *, extern int bio_uncopy_user(struct bio *); void zero_fill_bio(struct bio *bio); extern struct bio_vec *bvec_alloc_bs(gfp_t, int, unsigned long *, struct bio_set *); +extern void bvec_free_bs(struct bio_set *, struct bio_vec *, unsigned int); extern unsigned int bvec_nr_vecs(unsigned short idx); /* @@ -395,13 +410,17 @@ static inline void bio_set_completion_cpu(struct bio *bio, unsigned int cpu) */ #define BIO_POOL_SIZE 2 #define BIOVEC_NR_POOLS 6 +#define BIOVEC_MAX_IDX (BIOVEC_NR_POOLS - 1) struct bio_set { + struct kmem_cache *bio_slab; + unsigned int front_pad; + mempool_t *bio_pool; #if defined(CONFIG_BLK_DEV_INTEGRITY) mempool_t *bio_integrity_pool; #endif - mempool_t *bvec_pools[BIOVEC_NR_POOLS]; + mempool_t *bvec_pool; }; struct biovec_slab { @@ -411,6 +430,7 @@ struct biovec_slab { }; extern struct bio_set *fs_bio_set; +extern struct biovec_slab bvec_slabs[BIOVEC_NR_POOLS] __read_mostly; /* * a small number of entries is fine, not going to be performance critical. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 031a315c050..7035cec583b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -26,7 +26,6 @@ struct scsi_ioctl_command; struct request_queue; struct elevator_queue; -typedef struct elevator_queue elevator_t; struct request_pm_state; struct blk_trace; struct request; @@ -313,7 +312,7 @@ struct request_queue */ struct list_head queue_head; struct request *last_merge; - elevator_t *elevator; + struct elevator_queue *elevator; /* * the queue request freelist, one for reads and one for writes @@ -449,6 +448,7 @@ struct request_queue #define QUEUE_FLAG_FAIL_IO 12 /* fake timeout */ #define QUEUE_FLAG_STACKABLE 13 /* supports request stacking */ #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ +#define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ static inline int queue_is_locked(struct request_queue *q) { @@ -522,22 +522,32 @@ enum { * TAG_FLUSH : ordering by tag w/ pre and post flushes * TAG_FUA : ordering by tag w/ pre flush and FUA write */ - QUEUE_ORDERED_NONE = 0x00, - QUEUE_ORDERED_DRAIN = 0x01, - QUEUE_ORDERED_TAG = 0x02, - - QUEUE_ORDERED_PREFLUSH = 0x10, - QUEUE_ORDERED_POSTFLUSH = 0x20, - QUEUE_ORDERED_FUA = 0x40, - - QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH, - QUEUE_ORDERED_DRAIN_FUA = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_FUA, - QUEUE_ORDERED_TAG_FLUSH = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH, - QUEUE_ORDERED_TAG_FUA = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_FUA, + QUEUE_ORDERED_BY_DRAIN = 0x01, + QUEUE_ORDERED_BY_TAG = 0x02, + QUEUE_ORDERED_DO_PREFLUSH = 0x10, + QUEUE_ORDERED_DO_BAR = 0x20, + QUEUE_ORDERED_DO_POSTFLUSH = 0x40, + QUEUE_ORDERED_DO_FUA = 0x80, + + QUEUE_ORDERED_NONE = 0x00, + + QUEUE_ORDERED_DRAIN = QUEUE_ORDERED_BY_DRAIN | + QUEUE_ORDERED_DO_BAR, + QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN | + QUEUE_ORDERED_DO_PREFLUSH | + QUEUE_ORDERED_DO_POSTFLUSH, + QUEUE_ORDERED_DRAIN_FUA = QUEUE_ORDERED_DRAIN | + QUEUE_ORDERED_DO_PREFLUSH | + QUEUE_ORDERED_DO_FUA, + + QUEUE_ORDERED_TAG = QUEUE_ORDERED_BY_TAG | + QUEUE_ORDERED_DO_BAR, + QUEUE_ORDERED_TAG_FLUSH = QUEUE_ORDERED_TAG | + QUEUE_ORDERED_DO_PREFLUSH | + QUEUE_ORDERED_DO_POSTFLUSH, + QUEUE_ORDERED_TAG_FUA = QUEUE_ORDERED_TAG | + QUEUE_ORDERED_DO_PREFLUSH | + QUEUE_ORDERED_DO_FUA, /* * Ordered operation sequence @@ -585,7 +595,6 @@ enum { #define blk_fua_rq(rq) ((rq)->cmd_flags & REQ_FUA) #define blk_discard_rq(rq) ((rq)->cmd_flags & REQ_DISCARD) #define blk_bidi_rq(rq) ((rq)->next_rq != NULL) -#define blk_empty_barrier(rq) (blk_barrier_rq(rq) && blk_fs_request(rq) && !(rq)->hard_nr_sectors) /* rq->queuelist of dequeued request must be list_empty() */ #define blk_queued_rq(rq) (!list_empty(&(rq)->queuelist)) @@ -855,10 +864,10 @@ extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *); extern void blk_queue_rq_timeout(struct request_queue *, unsigned int); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *); -extern int blk_do_ordered(struct request_queue *, struct request **); +extern bool blk_do_ordered(struct request_queue *, struct request **); extern unsigned blk_ordered_cur_seq(struct request_queue *); extern unsigned blk_ordered_req_seq(struct request *); -extern void blk_ordered_complete_seq(struct request_queue *, unsigned, int); +extern bool blk_ordered_complete_seq(struct request_queue *, unsigned, int); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); extern void blk_dump_rq_flags(struct request *, char *); @@ -977,7 +986,6 @@ static inline void put_dev_sector(Sector p) struct work_struct; int kblockd_schedule_work(struct request_queue *q, struct work_struct *work); -void kblockd_flush_work(struct work_struct *work); #define MODULE_ALIAS_BLOCKDEV(major,minor) \ MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor)) diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h index 777dbf695d4..27b1bcffe40 100644 --- a/include/linux/bottom_half.h +++ b/include/linux/bottom_half.h @@ -2,7 +2,6 @@ #define _LINUX_BH_H extern void local_bh_disable(void); -extern void __local_bh_enable(void); extern void _local_bh_enable(void); extern void local_bh_enable(void); extern void local_bh_enable_ip(unsigned long ip); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 3ce64b90118..8605f8a74df 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -35,6 +35,7 @@ enum bh_state_bits { BH_Ordered, /* ordered write */ BH_Eopnotsupp, /* operation not supported (barrier) */ BH_Unwritten, /* Buffer is allocated on disk but not written */ + BH_Quiet, /* Buffer Error Prinks to be quiet */ BH_PrivateStart,/* not a state bit, but the first bit available * for private allocation by other entities diff --git a/include/linux/console.h b/include/linux/console.h index 248e6e3b9b7..a67a90cf826 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -153,4 +153,8 @@ void vcs_remove_sysfs(struct tty_struct *tty); #define VESA_HSYNC_SUSPEND 2 #define VESA_POWERDOWN 3 +#ifdef CONFIG_VGA_CONSOLE +extern bool vgacon_text_force(void); +#endif + #endif /* _LINUX_CONSOLE_H */ diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 4aaa4afb1cb..096476f1fb3 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -17,7 +17,7 @@ extern int debug_locks_off(void); ({ \ int __ret = 0; \ \ - if (unlikely(c)) { \ + if (!oops_in_progress && unlikely(c)) { \ if (debug_locks_off() && !debug_locks_silent) \ WARN_ON(1); \ __ret = 1; \ diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 2bfda178f27..34161907b2f 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -47,6 +47,7 @@ extern int dmi_name_in_vendors(const char *str); extern int dmi_name_in_serial(const char *str); extern int dmi_available; extern int dmi_walk(void (*decode)(const struct dmi_header *)); +extern bool dmi_match(enum dmi_field f, const char *str); #else @@ -61,6 +62,8 @@ static inline int dmi_name_in_serial(const char *s) { return 0; } #define dmi_available 0 static inline int dmi_walk(void (*decode)(const struct dmi_header *)) { return -1; } +static inline bool dmi_match(enum dmi_field f, const char *str) + { return false; } #endif diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 92f6f634e3e..7a204256b15 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -28,7 +28,7 @@ typedef void (elevator_activate_req_fn) (struct request_queue *, struct request typedef void (elevator_deactivate_req_fn) (struct request_queue *, struct request *); typedef void *(elevator_init_fn) (struct request_queue *); -typedef void (elevator_exit_fn) (elevator_t *); +typedef void (elevator_exit_fn) (struct elevator_queue *); struct elevator_ops { @@ -62,8 +62,8 @@ struct elevator_ops struct elv_fs_entry { struct attribute attr; - ssize_t (*show)(elevator_t *, char *); - ssize_t (*store)(elevator_t *, const char *, size_t); + ssize_t (*show)(struct elevator_queue *, char *); + ssize_t (*store)(struct elevator_queue *, const char *, size_t); }; /* @@ -130,7 +130,7 @@ extern ssize_t elv_iosched_show(struct request_queue *, char *); extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t); extern int elevator_init(struct request_queue *, char *); -extern void elevator_exit(elevator_t *); +extern void elevator_exit(struct elevator_queue *); extern int elv_rq_merge_ok(struct request *, struct bio *); /* diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index 32368c4f032..06ca9b21dad 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -81,4 +81,13 @@ static inline void cleanup_fault_attr_dentries(struct fault_attr *attr) #endif /* CONFIG_FAULT_INJECTION */ +#ifdef CONFIG_FAILSLAB +extern bool should_failslab(size_t size, gfp_t gfpflags); +#else +static inline bool should_failslab(size_t size, gfp_t gfpflags) +{ + return false; +} +#endif /* CONFIG_FAILSLAB */ + #endif /* _LINUX_FAULT_INJECT_H */ diff --git a/include/linux/futex.h b/include/linux/futex.h index 586ab56a3ec..3bf5bb5a34f 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -25,7 +25,8 @@ union ktime; #define FUTEX_WAKE_BITSET 10 #define FUTEX_PRIVATE_FLAG 128 -#define FUTEX_CMD_MASK ~FUTEX_PRIVATE_FLAG +#define FUTEX_CLOCK_REALTIME 256 +#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) #define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) #define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) @@ -164,6 +165,8 @@ union futex_key { } both; }; +#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } } + #ifdef CONFIG_FUTEX extern void exit_robust_list(struct task_struct *curr); extern void exit_pi_state_list(struct task_struct *curr); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 3df7742ce24..16948eaecae 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -126,6 +126,7 @@ struct blk_scsi_cmd_filter { struct disk_part_tbl { struct rcu_head rcu_head; int len; + struct hd_struct *last_lookup; struct hd_struct *part[]; }; diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 89a56d79e4c..f83288347dd 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -119,13 +119,17 @@ static inline void account_system_vtime(struct task_struct *tsk) } #endif -#if defined(CONFIG_PREEMPT_RCU) && defined(CONFIG_NO_HZ) +#if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) extern void rcu_irq_enter(void); extern void rcu_irq_exit(void); +extern void rcu_nmi_enter(void); +extern void rcu_nmi_exit(void); #else # define rcu_irq_enter() do { } while (0) # define rcu_irq_exit() do { } while (0) -#endif /* CONFIG_PREEMPT_RCU */ +# define rcu_nmi_enter() do { } while (0) +# define rcu_nmi_exit() do { } while (0) +#endif /* #if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) */ /* * It is safe to do non-atomic ops on ->hardirq_context, @@ -135,7 +139,6 @@ extern void rcu_irq_exit(void); */ #define __irq_enter() \ do { \ - rcu_irq_enter(); \ account_system_vtime(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ @@ -154,7 +157,6 @@ extern void irq_enter(void); trace_hardirq_exit(); \ account_system_vtime(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ - rcu_irq_exit(); \ } while (0) /* @@ -166,11 +168,14 @@ extern void irq_exit(void); do { \ ftrace_nmi_enter(); \ lockdep_off(); \ + rcu_nmi_enter(); \ __irq_enter(); \ } while (0) + #define nmi_exit() \ do { \ __irq_exit(); \ + rcu_nmi_exit(); \ lockdep_on(); \ ftrace_nmi_exit(); \ } while (0) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 3eba43878dc..bd37078c2d7 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -43,26 +43,6 @@ enum hrtimer_restart { }; /* - * hrtimer callback modes: - * - * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context - * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context - * Special mode for tick emulation and - * scheduler timer. Such timers are per - * cpu and not allowed to be migrated on - * cpu unplug. - * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context - * with timer->base lock unlocked - * used for timers which call wakeup to - * avoid lock order problems with rq->lock - */ -enum hrtimer_cb_mode { - HRTIMER_CB_SOFTIRQ, - HRTIMER_CB_IRQSAFE_PERCPU, - HRTIMER_CB_IRQSAFE_UNLOCKED, -}; - -/* * Values to track state of the timer * * Possible states: @@ -70,7 +50,6 @@ enum hrtimer_cb_mode { * 0x00 inactive * 0x01 enqueued into rbtree * 0x02 callback function running - * 0x04 callback pending (high resolution mode) * * Special cases: * 0x03 callback function running and enqueued @@ -92,8 +71,7 @@ enum hrtimer_cb_mode { #define HRTIMER_STATE_INACTIVE 0x00 #define HRTIMER_STATE_ENQUEUED 0x01 #define HRTIMER_STATE_CALLBACK 0x02 -#define HRTIMER_STATE_PENDING 0x04 -#define HRTIMER_STATE_MIGRATE 0x08 +#define HRTIMER_STATE_MIGRATE 0x04 /** * struct hrtimer - the basic hrtimer structure @@ -109,8 +87,6 @@ enum hrtimer_cb_mode { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @cb_mode: high resolution timer feature to select the callback execution - * mode * @cb_entry: list head to enqueue an expired timer into the callback list * @start_site: timer statistics field to store the site where the timer * was started @@ -129,7 +105,6 @@ struct hrtimer { struct hrtimer_clock_base *base; unsigned long state; struct list_head cb_entry; - enum hrtimer_cb_mode cb_mode; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; @@ -188,15 +163,11 @@ struct hrtimer_clock_base { * @check_clocks: Indictator, when set evaluate time source and clock * event devices whether high resolution mode can be * activated. - * @cb_pending: Expired timers are moved from the rbtree to this - * list in the timer interrupt. The list is processed - * in the softirq. * @nr_events: Total number of timer interrupt events */ struct hrtimer_cpu_base { spinlock_t lock; struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; - struct list_head cb_pending; #ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next; int hres_active; @@ -404,8 +375,7 @@ static inline int hrtimer_active(const struct hrtimer *timer) */ static inline int hrtimer_is_queued(struct hrtimer *timer) { - return timer->state & - (HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING); + return timer->state & HRTIMER_STATE_ENQUEUED; } /* diff --git a/include/linux/ide.h b/include/linux/ide.h index 010fb26a157..e99c56de7f5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -122,8 +122,6 @@ struct ide_io_ports { #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */ #define SECTOR_SIZE 512 -#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t))) - /* * Timeouts for various operations: */ @@ -172,9 +170,7 @@ typedef int (ide_ack_intr_t)(struct hwif_s *); enum { ide_unknown, ide_generic, ide_pci, ide_cmd640, ide_dtc2278, ide_ali14xx, ide_qd65xx, ide_umc8672, ide_ht6560b, - ide_rz1000, ide_trm290, - ide_cmd646, ide_cy82c693, ide_4drives, - ide_pmac, ide_acorn, + ide_4drives, ide_pmac, ide_acorn, ide_au1xxx, ide_palm3710 }; @@ -496,8 +492,6 @@ enum { * when more than one interrupt is needed. */ IDE_AFLAG_LIMIT_NFRAMES = (1 << 7), - /* Seeking in progress. */ - IDE_AFLAG_SEEKING = (1 << 8), /* Saved TOC information is current. */ IDE_AFLAG_TOC_VALID = (1 << 9), /* We think that the drive door is locked. */ @@ -845,8 +839,6 @@ typedef struct hwif_s { unsigned extra_ports; /* number of extra dma ports */ unsigned present : 1; /* this interface exists */ - unsigned serialized : 1; /* serialized all channel operation */ - unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ struct device gendev; @@ -909,6 +901,8 @@ typedef struct hwgroup_s { int req_gen; int req_gen_timer; + + spinlock_t lock; } ide_hwgroup_t; typedef struct ide_driver_s ide_driver_t; @@ -1122,6 +1116,14 @@ enum { IDE_PM_COMPLETED, }; +int generic_ide_suspend(struct device *, pm_message_t); +int generic_ide_resume(struct device *); + +void ide_complete_power_step(ide_drive_t *, struct request *); +ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *); +void ide_complete_pm_request(ide_drive_t *, struct request *); +void ide_check_pm_state(ide_drive_t *, struct request *); + /* * Subdrivers support. * @@ -1376,8 +1378,8 @@ enum { IDE_HFLAG_LEGACY_IRQS = (1 << 21), /* force use of legacy IRQs */ IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22), - /* limit LBA48 requests to 256 sectors */ - IDE_HFLAG_RQSIZE_256 = (1 << 23), + /* host is TRM290 */ + IDE_HFLAG_TRM290 = (1 << 23), /* use 32-bit I/O ops */ IDE_HFLAG_IO_32BIT = (1 << 24), /* unmask IRQs */ @@ -1415,6 +1417,9 @@ struct ide_port_info { ide_pci_enablebit_t enablebits[2]; hwif_chipset_t chipset; + + u16 max_sectors; /* if < than the default one */ + u32 host_flags; u8 pio_mask; u8 swdma_mask; @@ -1610,13 +1615,13 @@ extern struct mutex ide_cfg_mtx; /* * Structure locking: * - * ide_cfg_mtx and ide_lock together protect changes to - * ide_hwif_t->{next,hwgroup} + * ide_cfg_mtx and hwgroup->lock together protect changes to + * ide_hwif_t->next * ide_drive_t->next * - * ide_hwgroup_t->busy: ide_lock - * ide_hwgroup_t->hwif: ide_lock - * ide_hwif_t->mate: constant, no locking + * ide_hwgroup_t->busy: hwgroup->lock + * ide_hwgroup_t->hwif: hwgroup->lock + * ide_hwif_t->{hwgroup,mate}: constant, no locking * ide_drive_t->hwif: constant, no locking */ diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index f58a0cf8929..be3c484b524 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -14,6 +14,8 @@ #include <linux/irqflags.h> #include <linux/smp.h> #include <linux/percpu.h> +#include <linux/irqnr.h> + #include <asm/atomic.h> #include <asm/ptrace.h> #include <asm/system.h> @@ -251,9 +253,6 @@ enum BLOCK_SOFTIRQ, TASKLET_SOFTIRQ, SCHED_SOFTIRQ, -#ifdef CONFIG_HIGH_RES_TIMERS - HRTIMER_SOFTIRQ, -#endif RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS diff --git a/include/linux/irq.h b/include/linux/irq.h index 3dddfa703eb..98564dc6447 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -129,9 +129,14 @@ struct irq_chip { const char *typename; }; +struct timer_rand_state; +struct irq_2_iommu; /** * struct irq_desc - interrupt descriptor * @irq: interrupt number for this descriptor + * @timer_rand_state: pointer to timer rand state struct + * @kstat_irqs: irq stats per cpu + * @irq_2_iommu: iommu with this irq * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()] * @chip: low level interrupt hardware access * @msi_desc: MSI descriptor @@ -143,8 +148,8 @@ struct irq_chip { * @depth: disable-depth, for nested irq_disable() calls * @wake_depth: enable depth, for multiple set_irq_wake() callers * @irq_count: stats field to detect stalled irqs - * @irqs_unhandled: stats field for spurious unhandled interrupts * @last_unhandled: aging timer for unhandled count + * @irqs_unhandled: stats field for spurious unhandled interrupts * @lock: locking for SMP * @affinity: IRQ affinity on SMP * @cpu: cpu index useful for balancing @@ -154,6 +159,13 @@ struct irq_chip { */ struct irq_desc { unsigned int irq; +#ifdef CONFIG_SPARSE_IRQ + struct timer_rand_state *timer_rand_state; + unsigned int *kstat_irqs; +# ifdef CONFIG_INTR_REMAP + struct irq_2_iommu *irq_2_iommu; +# endif +#endif irq_flow_handler_t handle_irq; struct irq_chip *chip; struct msi_desc *msi_desc; @@ -165,8 +177,8 @@ struct irq_desc { unsigned int depth; /* nested irq disables */ unsigned int wake_depth; /* nested wake enables */ unsigned int irq_count; /* For detecting broken IRQs */ - unsigned int irqs_unhandled; unsigned long last_unhandled; /* Aging timer for unhandled count */ + unsigned int irqs_unhandled; spinlock_t lock; #ifdef CONFIG_SMP cpumask_t affinity; @@ -181,12 +193,51 @@ struct irq_desc { const char *name; } ____cacheline_internodealigned_in_smp; +extern void early_irq_init(void); +extern void arch_early_irq_init(void); +extern void arch_init_chip_data(struct irq_desc *desc, int cpu); +extern void arch_init_copy_chip_data(struct irq_desc *old_desc, + struct irq_desc *desc, int cpu); +extern void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc); +#ifndef CONFIG_SPARSE_IRQ extern struct irq_desc irq_desc[NR_IRQS]; static inline struct irq_desc *irq_to_desc(unsigned int irq) { - return (irq < nr_irqs) ? irq_desc + irq : NULL; + return (irq < NR_IRQS) ? irq_desc + irq : NULL; +} +static inline struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu) +{ + return irq_to_desc(irq); +} + +#else + +extern struct irq_desc *irq_to_desc(unsigned int irq); +extern struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu); +extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int cpu); + +# define for_each_irq_desc(irq, desc) \ + for (irq = 0, desc = irq_to_desc(irq); irq < nr_irqs; irq++, desc = irq_to_desc(irq)) +# define for_each_irq_desc_reverse(irq, desc) \ + for (irq = nr_irqs - 1, desc = irq_to_desc(irq); irq >= 0; irq--, desc = irq_to_desc(irq)) + +#define kstat_irqs_this_cpu(DESC) \ + ((DESC)->kstat_irqs[smp_processor_id()]) +#define kstat_incr_irqs_this_cpu(irqno, DESC) \ + ((DESC)->kstat_irqs[smp_processor_id()]++) + +#endif + +static inline struct irq_desc * +irq_remap_to_desc(unsigned int irq, struct irq_desc *desc) +{ +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC + return irq_to_desc(irq); +#else + return desc; +#endif } /* @@ -380,6 +431,11 @@ extern int set_irq_msi(unsigned int irq, struct msi_desc *entry); #define get_irq_data(irq) (irq_to_desc(irq)->handler_data) #define get_irq_msi(irq) (irq_to_desc(irq)->msi_desc) +#define get_irq_desc_chip(desc) ((desc)->chip) +#define get_irq_desc_chip_data(desc) ((desc)->chip_data) +#define get_irq_desc_data(desc) ((desc)->handler_data) +#define get_irq_desc_msi(desc) ((desc)->msi_desc) + #endif /* CONFIG_GENERIC_HARDIRQS */ #endif /* !CONFIG_S390 */ diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h index 452c280c811..95d2b74641f 100644 --- a/include/linux/irqnr.h +++ b/include/linux/irqnr.h @@ -1,24 +1,38 @@ #ifndef _LINUX_IRQNR_H #define _LINUX_IRQNR_H +/* + * Generic irq_desc iterators: + */ +#ifdef __KERNEL__ + #ifndef CONFIG_GENERIC_HARDIRQS #include <asm/irq.h> # define nr_irqs NR_IRQS # define for_each_irq_desc(irq, desc) \ for (irq = 0; irq < nr_irqs; irq++) + +# define for_each_irq_desc_reverse(irq, desc) \ + for (irq = nr_irqs - 1; irq >= 0; irq--) #else + extern int nr_irqs; +#ifndef CONFIG_SPARSE_IRQ + +struct irq_desc; # define for_each_irq_desc(irq, desc) \ for (irq = 0, desc = irq_desc; irq < nr_irqs; irq++, desc++) - -# define for_each_irq_desc_reverse(irq, desc) \ - for (irq = nr_irqs - 1, desc = irq_desc + (nr_irqs - 1); \ - irq >= 0; irq--, desc--) +# define for_each_irq_desc_reverse(irq, desc) \ + for (irq = nr_irqs - 1, desc = irq_desc + (nr_irqs - 1); \ + irq >= 0; irq--, desc--) +#endif #endif -#define for_each_irq_nr(irq) \ - for (irq = 0; irq < nr_irqs; irq++) +#define for_each_irq_nr(irq) \ + for (irq = 0; irq < nr_irqs; irq++) + +#endif /* __KERNEL__ */ #endif diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index abb6ac639e8..1a9cf78bfce 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -115,10 +115,20 @@ static inline u64 get_jiffies_64(void) ((long)(a) - (long)(b) >= 0)) #define time_before_eq(a,b) time_after_eq(b,a) +/* + * Calculate whether a is in the range of [b, c]. + */ #define time_in_range(a,b,c) \ (time_after_eq(a,b) && \ time_before_eq(a,c)) +/* + * Calculate whether a is in the range of [b, c). + */ +#define time_in_range_open(a,b,c) \ + (time_after_eq(a,b) && \ + time_before(a,c)) + /* Same as above, but does so with platform independent 64bit types. * These must be used when utilizing jiffies_64 (i.e. return value of * get_jiffies_64() */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 6002ae76785..ca9ff6411df 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -141,6 +141,15 @@ extern int _cond_resched(void); (__x < 0) ? -__x : __x; \ }) +#ifdef CONFIG_PROVE_LOCKING +void might_fault(void); +#else +static inline void might_fault(void) +{ + might_sleep(); +} +#endif + extern struct atomic_notifier_head panic_notifier_list; extern long (*panic_blink)(long time); NORET_TYPE void panic(const char * fmt, ...) @@ -188,6 +197,8 @@ extern unsigned long long memparse(const char *ptr, char **retptr); extern int core_kernel_text(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); +extern int func_ptr_is_kernel_text(void *ptr); + struct pid; extern struct pid *session_of_pgrp(struct pid *pgrp); diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index 4a145caeee0..4ee4b3d2316 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -28,7 +28,9 @@ struct cpu_usage_stat { struct kernel_stat { struct cpu_usage_stat cpustat; - unsigned int irqs[NR_IRQS]; +#ifndef CONFIG_SPARSE_IRQ + unsigned int irqs[NR_IRQS]; +#endif }; DECLARE_PER_CPU(struct kernel_stat, kstat); @@ -39,6 +41,10 @@ DECLARE_PER_CPU(struct kernel_stat, kstat); extern unsigned long long nr_context_switches(void); +#ifndef CONFIG_SPARSE_IRQ +#define kstat_irqs_this_cpu(irq) \ + (kstat_this_cpu.irqs[irq]) + struct irq_desc; static inline void kstat_incr_irqs_this_cpu(unsigned int irq, @@ -46,11 +52,17 @@ static inline void kstat_incr_irqs_this_cpu(unsigned int irq, { kstat_this_cpu.irqs[irq]++; } +#endif + +#ifndef CONFIG_SPARSE_IRQ static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu) { return kstat_cpu(cpu).irqs[irq]; } +#else +extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu); +#endif /* * Number of interrupts per specific IRQ source, since bootup diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index e7217dc58f3..a53407a4165 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -54,9 +54,13 @@ struct lguest_vqconfig { /* Write command first word is a request. */ enum lguest_req { - LHREQ_INITIALIZE, /* + base, pfnlimit, pgdir, start */ + LHREQ_INITIALIZE, /* + base, pfnlimit, start */ LHREQ_GETDMA, /* No longer used */ LHREQ_IRQ, /* + irq */ LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */ }; + +/* The alignment to use between consumer and producer parts of vring. + * x86 pagesize for historical reasons. */ +#define LGUEST_VRING_ALIGN 4096 #endif /* _LINUX_LGUEST_LAUNCHER */ diff --git a/include/linux/libata.h b/include/linux/libata.h index ed3f26eb5df..3449de597ef 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -213,10 +213,11 @@ enum { ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ - ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ + ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */ + ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ @@ -1285,26 +1286,62 @@ static inline int ata_link_active(struct ata_link *link) return ata_tag_valid(link->active_tag) || link->sactive; } -extern struct ata_link *__ata_port_next_link(struct ata_port *ap, - struct ata_link *link, - bool dev_only); +/* + * Iterators + * + * ATA_LITER_* constants are used to select link iteration mode and + * ATA_DITER_* device iteration mode. + * + * For a custom iteration directly using ata_{link|dev}_next(), if + * @link or @dev, respectively, is NULL, the first element is + * returned. @dev and @link can be any valid device or link and the + * next element according to the iteration mode will be returned. + * After the last element, NULL is returned. + */ +enum ata_link_iter_mode { + ATA_LITER_EDGE, /* if present, PMP links only; otherwise, + * host link. no slave link */ + ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */ + ATA_LITER_PMP_FIRST, /* PMP links followed by host link, + * slave link still comes after host link */ +}; -#define __ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, false); (link); \ - (link) = __ata_port_next_link((ap), (link), false)) +enum ata_dev_iter_mode { + ATA_DITER_ENABLED, + ATA_DITER_ENABLED_REVERSE, + ATA_DITER_ALL, + ATA_DITER_ALL_REVERSE, +}; -#define ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, true); (link); \ - (link) = __ata_port_next_link((ap), (link), true)) +extern struct ata_link *ata_link_next(struct ata_link *link, + struct ata_port *ap, + enum ata_link_iter_mode mode); -#define ata_link_for_each_dev(dev, link) \ - for ((dev) = (link)->device; \ - (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \ - (dev)++) +extern struct ata_device *ata_dev_next(struct ata_device *dev, + struct ata_link *link, + enum ata_dev_iter_mode mode); + +/* + * Shortcut notation for iterations + * + * ata_for_each_link() iterates over each link of @ap according to + * @mode. @link points to the current link in the loop. @link is + * NULL after loop termination. ata_for_each_dev() works the same way + * except that it iterates over each device of @link. + * + * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be + * specified when using the following shorthand notations. Only the + * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be + * specified. This not only increases brevity but also makes it + * impossible to use ATA_LITER_* for device iteration or vice-versa. + */ +#define ata_for_each_link(link, ap, mode) \ + for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \ + (link) = ata_link_next((link), (ap), ATA_LITER_##mode)) -#define ata_link_for_each_dev_reverse(dev, link) \ - for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \ - (dev) >= (link)->device || ((dev) = NULL); (dev)--) +#define ata_for_each_dev(dev, link, mode) \ + for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \ + (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode)) /** * ata_ncq_enabled - Test whether NCQ is enabled diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index e5872dc994c..fbc48f89852 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -41,6 +41,7 @@ struct nlmclnt_initdata { size_t addrlen; unsigned short protocol; u32 nfs_version; + int noresvport; }; /* diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index b56d5aa9b19..23da3fa69ef 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -49,6 +49,7 @@ struct nlm_host { unsigned short h_proto; /* transport proto */ unsigned short h_reclaiming : 1, h_server : 1, /* server side, not client side */ + h_noresvport : 1, h_inuse : 1; wait_queue_head_t h_gracewait; /* wait while reclaiming */ struct rw_semaphore h_rwsem; /* Reboot recovery lock */ @@ -220,7 +221,8 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap, const size_t salen, const unsigned short protocol, const u32 version, - const char *hostname); + const char *hostname, + int noresvport); struct nlm_host *nlmsvc_lookup_host(const struct svc_rqst *rqstp, const char *hostname, const size_t hostname_len); diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 29aec6e1002..23bf02fb124 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -73,6 +73,8 @@ struct lock_class_key { struct lockdep_subclass_key subkeys[MAX_LOCKDEP_SUBCLASSES]; }; +#define LOCKSTAT_POINTS 4 + /* * The lock-class itself: */ @@ -119,7 +121,8 @@ struct lock_class { int name_version; #ifdef CONFIG_LOCK_STAT - unsigned long contention_point[4]; + unsigned long contention_point[LOCKSTAT_POINTS]; + unsigned long contending_point[LOCKSTAT_POINTS]; #endif }; @@ -144,6 +147,7 @@ enum bounce_type { struct lock_class_stats { unsigned long contention_point[4]; + unsigned long contending_point[4]; struct lock_time read_waittime; struct lock_time write_waittime; struct lock_time read_holdtime; @@ -165,6 +169,7 @@ struct lockdep_map { const char *name; #ifdef CONFIG_LOCK_STAT int cpu; + unsigned long ip; #endif }; @@ -309,8 +314,15 @@ extern void lock_acquire(struct lockdep_map *lock, unsigned int subclass, extern void lock_release(struct lockdep_map *lock, int nested, unsigned long ip); -extern void lock_set_subclass(struct lockdep_map *lock, unsigned int subclass, - unsigned long ip); +extern void lock_set_class(struct lockdep_map *lock, const char *name, + struct lock_class_key *key, unsigned int subclass, + unsigned long ip); + +static inline void lock_set_subclass(struct lockdep_map *lock, + unsigned int subclass, unsigned long ip) +{ + lock_set_class(lock, lock->name, lock->key, subclass, ip); +} # define INIT_LOCKDEP .lockdep_recursion = 0, @@ -328,6 +340,7 @@ static inline void lockdep_on(void) # define lock_acquire(l, s, t, r, c, n, i) do { } while (0) # define lock_release(l, n, i) do { } while (0) +# define lock_set_class(l, n, k, s, i) do { } while (0) # define lock_set_subclass(l, s, i) do { } while (0) # define lockdep_init() do { } while (0) # define lockdep_info() do { } while (0) @@ -356,7 +369,7 @@ struct lock_class_key { }; #ifdef CONFIG_LOCK_STAT extern void lock_contended(struct lockdep_map *lock, unsigned long ip); -extern void lock_acquired(struct lockdep_map *lock); +extern void lock_acquired(struct lockdep_map *lock, unsigned long ip); #define LOCK_CONTENDED(_lock, try, lock) \ do { \ @@ -364,20 +377,20 @@ do { \ lock_contended(&(_lock)->dep_map, _RET_IP_); \ lock(_lock); \ } \ - lock_acquired(&(_lock)->dep_map); \ + lock_acquired(&(_lock)->dep_map, _RET_IP_); \ } while (0) #else /* CONFIG_LOCK_STAT */ #define lock_contended(lockdep_map, ip) do {} while (0) -#define lock_acquired(lockdep_map) do {} while (0) +#define lock_acquired(lockdep_map, ip) do {} while (0) #define LOCK_CONTENDED(_lock, try, lock) \ lock(_lock) #endif /* CONFIG_LOCK_STAT */ -#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_GENERIC_HARDIRQS) +#ifdef CONFIG_GENERIC_HARDIRQS extern void early_init_irq_lock_class(void); #else static inline void early_init_irq_lock_class(void) @@ -481,4 +494,22 @@ static inline void print_irqtrace_events(struct task_struct *curr) # define lock_map_release(l) do { } while (0) #endif +#ifdef CONFIG_PROVE_LOCKING +# define might_lock(lock) \ +do { \ + typecheck(struct lockdep_map *, &(lock)->dep_map); \ + lock_acquire(&(lock)->dep_map, 0, 0, 0, 2, NULL, _THIS_IP_); \ + lock_release(&(lock)->dep_map, 0, _THIS_IP_); \ +} while (0) +# define might_lock_read(lock) \ +do { \ + typecheck(struct lockdep_map *, &(lock)->dep_map); \ + lock_acquire(&(lock)->dep_map, 0, 0, 1, 2, NULL, _THIS_IP_); \ + lock_release(&(lock)->dep_map, 0, _THIS_IP_); \ +} while (0) +#else +# define might_lock(lock) do { } while (0) +# define might_lock_read(lock) do { } while (0) +#endif + #endif /* __LINUX_LOCKDEP_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index fe825471d5a..9cfc9b627fd 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -232,8 +232,9 @@ struct mm_struct { struct core_state *core_state; /* coredumping support */ /* aio bits */ - rwlock_t ioctx_list_lock; /* aio lock */ - struct kioctx *ioctx_list; + spinlock_t ioctx_lock; + struct hlist_head ioctx_list; + #ifdef CONFIG_MM_OWNER /* * "owner" points to a task that is regarded as the canonical diff --git a/include/linux/msi.h b/include/linux/msi.h index 8f293922720..d2b8a1e8ca1 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -10,8 +10,11 @@ struct msi_msg { }; /* Helper functions */ +struct irq_desc; extern void mask_msi_irq(unsigned int irq); extern void unmask_msi_irq(unsigned int irq); +extern void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg); +extern void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg); extern void read_msi_msg(unsigned int irq, struct msi_msg *msg); extern void write_msi_msg(unsigned int irq, struct msi_msg *msg); diff --git a/include/linux/mutex.h b/include/linux/mutex.h index bc6da10ceee..7a0e5c4f807 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -144,6 +144,8 @@ extern int __must_check mutex_lock_killable(struct mutex *lock); /* * NOTE: mutex_trylock() follows the spin_trylock() convention, * not the down_trylock() convention! + * + * Returns 1 if the mutex has been acquired successfully, and 0 on contention. */ extern int mutex_trylock(struct mutex *lock); extern void mutex_unlock(struct mutex *lock); diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 4eaa8347a0d..db867b04ac3 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -83,7 +83,7 @@ struct nfs_open_context { struct rpc_cred *cred; struct nfs4_state *state; fl_owner_t lockowner; - int mode; + fmode_t mode; unsigned long flags; #define NFS_CONTEXT_ERROR_WRITE (0) @@ -130,7 +130,10 @@ struct nfs_inode { * * We need to revalidate the cached attrs for this inode if * - * jiffies - read_cache_jiffies > attrtimeo + * jiffies - read_cache_jiffies >= attrtimeo + * + * Please note the comparison is greater than or equal + * so that zero timeout values can be specified. */ unsigned long read_cache_jiffies; unsigned long attrtimeo; @@ -180,7 +183,7 @@ struct nfs_inode { /* NFSv4 state */ struct list_head open_states; struct nfs_delegation *delegation; - int delegation_state; + fmode_t delegation_state; struct rw_semaphore rwsem; #endif /* CONFIG_NFS_V4*/ struct inode vfs_inode; @@ -342,7 +345,7 @@ extern int nfs_setattr(struct dentry *, struct iattr *); extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr); extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx); extern void put_nfs_open_context(struct nfs_open_context *ctx); -extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, int mode); +extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, fmode_t mode); extern u64 nfs_compat_user_ino64(u64 fileid); extern void nfs_fattr_init(struct nfs_fattr *fattr); @@ -533,12 +536,6 @@ static inline void nfs3_forget_cached_acls(struct inode *inode) #endif /* CONFIG_NFS_V3_ACL */ /* - * linux/fs/mount_clnt.c - */ -extern int nfs_mount(struct sockaddr *, size_t, char *, char *, - int, int, struct nfs_fh *); - -/* * inline functions */ diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 4e477ae5869..9bb81aec91c 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -42,12 +42,6 @@ struct nfs_client { struct rb_root cl_openowner_id; struct rb_root cl_lockowner_id; - /* - * The following rwsem ensures exclusive access to the server - * while we recover the state following a lease expiration. - */ - struct rw_semaphore cl_sem; - struct list_head cl_delegations; struct rb_root cl_state_owners; spinlock_t cl_lock; diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h index 6549a06ac16..4499016e6d0 100644 --- a/include/linux/nfs_mount.h +++ b/include/linux/nfs_mount.h @@ -45,7 +45,7 @@ struct nfs_mount_data { char context[NFS_MAX_CONTEXT_LEN + 1]; /* 6 */ }; -/* bits in the flags field */ +/* bits in the flags field visible to user space */ #define NFS_MOUNT_SOFT 0x0001 /* 1 */ #define NFS_MOUNT_INTR 0x0002 /* 1 */ /* now unused, but ABI */ @@ -68,5 +68,6 @@ struct nfs_mount_data { /* The following are for internal use only */ #define NFS_MOUNT_LOOKUP_CACHE_NONEG 0x10000 #define NFS_MOUNT_LOOKUP_CACHE_NONE 0x20000 +#define NFS_MOUNT_NORESVPORT 0x40000 #endif diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index c1c31acb8a2..a550b528319 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -120,13 +120,14 @@ struct nfs_openargs { const struct nfs_fh * fh; struct nfs_seqid * seqid; int open_flags; + fmode_t fmode; __u64 clientid; __u64 id; union { struct iattr * attrs; /* UNCHECKED, GUARDED */ nfs4_verifier verifier; /* EXCLUSIVE */ nfs4_stateid delegation; /* CLAIM_DELEGATE_CUR */ - int delegation_type; /* CLAIM_PREVIOUS */ + fmode_t delegation_type; /* CLAIM_PREVIOUS */ } u; const struct qstr * name; const struct nfs_server *server; /* Needed for ID mapping */ @@ -143,7 +144,7 @@ struct nfs_openres { struct nfs_fattr * dir_attr; struct nfs_seqid * seqid; const struct nfs_server *server; - int delegation_type; + fmode_t delegation_type; nfs4_stateid delegation; __u32 do_recall; __u64 maxsize; @@ -171,7 +172,7 @@ struct nfs_closeargs { struct nfs_fh * fh; nfs4_stateid * stateid; struct nfs_seqid * seqid; - int open_flags; + fmode_t fmode; const u32 * bitmask; }; diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index d0fe2e37845..128298c0362 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -124,6 +124,8 @@ struct nfs4_client { nfs4_verifier cl_verifier; /* generated by client */ time_t cl_time; /* time of last lease renewal */ __be32 cl_addr; /* client ipaddress */ + u32 cl_flavor; /* setclientid pseudoflavor */ + char *cl_principal; /* setclientid principal name */ struct svc_cred cl_cred; /* setclientid principal */ clientid_t cl_clientid; /* generated by server */ nfs4_verifier cl_confirm; /* generated by server */ diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index a8efcfeea73..3d327b67d7e 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -26,8 +26,7 @@ extern struct bus_type of_platform_bus_type; /* * An of_platform_driver driver is attached to a basic of_device on - * the "platform bus" (of_platform_bus_type) (or ISA, EBUS and SBUS - * busses on sparc). + * the "platform bus" (of_platform_bus_type). */ struct of_platform_driver { diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 5231861f357..1ce9fe572e5 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -86,8 +86,7 @@ int oprofile_arch_init(struct oprofile_operations * ops); void oprofile_arch_exit(void); /** - * Add a sample. This may be called from any context. Pass - * smp_processor_id() as cpu. + * Add a sample. This may be called from any context. */ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event); diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index a7c72135554..4f71bf4e628 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -45,7 +45,11 @@ struct k_itimer { int it_requeue_pending; /* waiting to requeue this timer */ #define REQUEUE_PENDING 1 int it_sigev_notify; /* notify word of sigevent struct */ - struct task_struct *it_process; /* process to send signal to */ + struct signal_struct *it_signal; + union { + struct pid *it_pid; /* pid of process to send signal to */ + struct task_struct *it_process; /* for clock_nanosleep */ + }; struct sigqueue *sigq; /* signal queue entry. */ union { struct { diff --git a/include/linux/random.h b/include/linux/random.h index 36f125c0c60..adbf3bd3c6b 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -8,6 +8,7 @@ #define _LINUX_RANDOM_H #include <linux/ioctl.h> +#include <linux/irqnr.h> /* ioctl()'s for the random number generator */ @@ -44,6 +45,56 @@ struct rand_pool_info { extern void rand_initialize_irq(int irq); +struct timer_rand_state; +#ifndef CONFIG_SPARSE_IRQ + +extern struct timer_rand_state *irq_timer_state[]; + +static inline struct timer_rand_state *get_timer_rand_state(unsigned int irq) +{ + if (irq >= nr_irqs) + return NULL; + + return irq_timer_state[irq]; +} + +static inline void set_timer_rand_state(unsigned int irq, struct timer_rand_state *state) +{ + if (irq >= nr_irqs) + return; + + irq_timer_state[irq] = state; +} + +#else + +#include <linux/irq.h> +static inline struct timer_rand_state *get_timer_rand_state(unsigned int irq) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + if (!desc) + return NULL; + + return desc->timer_rand_state; +} + +static inline void set_timer_rand_state(unsigned int irq, struct timer_rand_state *state) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + if (!desc) + return; + + desc->timer_rand_state = state; +} +#endif + + extern void add_input_randomness(unsigned int type, unsigned int code, unsigned int value); extern void add_interrupt_randomness(int irq); diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h index 5f89b62e698..301dda829e3 100644 --- a/include/linux/rcuclassic.h +++ b/include/linux/rcuclassic.h @@ -41,7 +41,7 @@ #include <linux/seqlock.h> #ifdef CONFIG_RCU_CPU_STALL_DETECTOR -#define RCU_SECONDS_TILL_STALL_CHECK ( 3 * HZ) /* for rcp->jiffies_stall */ +#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rcp->jiffies_stall */ #define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rcp->jiffies_stall */ #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 895dc9c1088..1168fbcea8d 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,11 +52,15 @@ struct rcu_head { void (*func)(struct rcu_head *head); }; -#ifdef CONFIG_CLASSIC_RCU +#if defined(CONFIG_CLASSIC_RCU) #include <linux/rcuclassic.h> -#else /* #ifdef CONFIG_CLASSIC_RCU */ +#elif defined(CONFIG_TREE_RCU) +#include <linux/rcutree.h> +#elif defined(CONFIG_PREEMPT_RCU) #include <linux/rcupreempt.h> -#endif /* #else #ifdef CONFIG_CLASSIC_RCU */ +#else +#error "Unknown RCU implementation specified to kernel configuration" +#endif /* #else #if defined(CONFIG_CLASSIC_RCU) */ #define RCU_HEAD_INIT { .next = NULL, .func = NULL } #define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h new file mode 100644 index 00000000000..d4368b7975c --- /dev/null +++ b/include/linux/rcutree.h @@ -0,0 +1,329 @@ +/* + * Read-Copy Update mechanism for mutual exclusion (tree-based version) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2008 + * + * Author: Dipankar Sarma <dipankar@in.ibm.com> + * Paul E. McKenney <paulmck@linux.vnet.ibm.com> Hierarchical algorithm + * + * Based on the original work by Paul McKenney <paulmck@us.ibm.com> + * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. + * + * For detailed explanation of Read-Copy Update mechanism see - + * Documentation/RCU + */ + +#ifndef __LINUX_RCUTREE_H +#define __LINUX_RCUTREE_H + +#include <linux/cache.h> +#include <linux/spinlock.h> +#include <linux/threads.h> +#include <linux/percpu.h> +#include <linux/cpumask.h> +#include <linux/seqlock.h> + +/* + * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT. + * In theory, it should be possible to add more levels straightforwardly. + * In practice, this has not been tested, so there is probably some + * bug somewhere. + */ +#define MAX_RCU_LVLS 3 +#define RCU_FANOUT (CONFIG_RCU_FANOUT) +#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT) +#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT) + +#if NR_CPUS <= RCU_FANOUT +# define NUM_RCU_LVLS 1 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (NR_CPUS) +# define NUM_RCU_LVL_2 0 +# define NUM_RCU_LVL_3 0 +#elif NR_CPUS <= RCU_FANOUT_SQ +# define NUM_RCU_LVLS 2 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT) +# define NUM_RCU_LVL_2 (NR_CPUS) +# define NUM_RCU_LVL_3 0 +#elif NR_CPUS <= RCU_FANOUT_CUBE +# define NUM_RCU_LVLS 3 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ) +# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT)) +# define NUM_RCU_LVL_3 NR_CPUS +#else +# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS" +#endif /* #if (NR_CPUS) <= RCU_FANOUT */ + +#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3) +#define NUM_RCU_NODES (RCU_SUM - NR_CPUS) + +/* + * Dynticks per-CPU state. + */ +struct rcu_dynticks { + int dynticks_nesting; /* Track nesting level, sort of. */ + int dynticks; /* Even value for dynticks-idle, else odd. */ + int dynticks_nmi; /* Even value for either dynticks-idle or */ + /* not in nmi handler, else odd. So this */ + /* remains even for nmi from irq handler. */ +}; + +/* + * Definition for node within the RCU grace-period-detection hierarchy. + */ +struct rcu_node { + spinlock_t lock; + unsigned long qsmask; /* CPUs or groups that need to switch in */ + /* order for current grace period to proceed.*/ + unsigned long qsmaskinit; + /* Per-GP initialization for qsmask. */ + unsigned long grpmask; /* Mask to apply to parent qsmask. */ + int grplo; /* lowest-numbered CPU or group here. */ + int grphi; /* highest-numbered CPU or group here. */ + u8 grpnum; /* CPU/group number for next level up. */ + u8 level; /* root is at level 0. */ + struct rcu_node *parent; +} ____cacheline_internodealigned_in_smp; + +/* Index values for nxttail array in struct rcu_data. */ +#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */ +#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */ +#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */ +#define RCU_NEXT_TAIL 3 +#define RCU_NEXT_SIZE 4 + +/* Per-CPU data for read-copy update. */ +struct rcu_data { + /* 1) quiescent-state and grace-period handling : */ + long completed; /* Track rsp->completed gp number */ + /* in order to detect GP end. */ + long gpnum; /* Highest gp number that this CPU */ + /* is aware of having started. */ + long passed_quiesc_completed; + /* Value of completed at time of qs. */ + bool passed_quiesc; /* User-mode/idle loop etc. */ + bool qs_pending; /* Core waits for quiesc state. */ + bool beenonline; /* CPU online at least once. */ + struct rcu_node *mynode; /* This CPU's leaf of hierarchy */ + unsigned long grpmask; /* Mask to apply to leaf qsmask. */ + + /* 2) batch handling */ + /* + * If nxtlist is not NULL, it is partitioned as follows. + * Any of the partitions might be empty, in which case the + * pointer to that partition will be equal to the pointer for + * the following partition. When the list is empty, all of + * the nxttail elements point to nxtlist, which is NULL. + * + * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]): + * Entries that might have arrived after current GP ended + * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]): + * Entries known to have arrived before current GP ended + * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]): + * Entries that batch # <= ->completed - 1: waiting for current GP + * [nxtlist, *nxttail[RCU_DONE_TAIL]): + * Entries that batch # <= ->completed + * The grace period for these entries has completed, and + * the other grace-period-completed entries may be moved + * here temporarily in rcu_process_callbacks(). + */ + struct rcu_head *nxtlist; + struct rcu_head **nxttail[RCU_NEXT_SIZE]; + long qlen; /* # of queued callbacks */ + long blimit; /* Upper limit on a processed batch */ + +#ifdef CONFIG_NO_HZ + /* 3) dynticks interface. */ + struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */ + int dynticks_snap; /* Per-GP tracking for dynticks. */ + int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */ +#endif /* #ifdef CONFIG_NO_HZ */ + + /* 4) reasons this CPU needed to be kicked by force_quiescent_state */ +#ifdef CONFIG_NO_HZ + unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */ +#endif /* #ifdef CONFIG_NO_HZ */ + unsigned long offline_fqs; /* Kicked due to being offline. */ + unsigned long resched_ipi; /* Sent a resched IPI. */ + + /* 5) state to allow this CPU to force_quiescent_state on others */ + long n_rcu_pending; /* rcu_pending() calls since boot. */ + long n_rcu_pending_force_qs; /* when to force quiescent states. */ + + int cpu; +}; + +/* Values for signaled field in struct rcu_state. */ +#define RCU_GP_INIT 0 /* Grace period being initialized. */ +#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */ +#define RCU_FORCE_QS 2 /* Need to force quiescent state. */ +#ifdef CONFIG_NO_HZ +#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK +#else /* #ifdef CONFIG_NO_HZ */ +#define RCU_SIGNAL_INIT RCU_FORCE_QS +#endif /* #else #ifdef CONFIG_NO_HZ */ + +#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */ +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR +#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */ +#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */ +#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */ + /* to take at least one */ + /* scheduling clock irq */ + /* before ratting on them. */ + +#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ + +/* + * RCU global state, including node hierarchy. This hierarchy is + * represented in "heap" form in a dense array. The root (first level) + * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second + * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]), + * and the third level in ->node[m+1] and following (->node[m+1] referenced + * by ->level[2]). The number of levels is determined by the number of + * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy" + * consisting of a single rcu_node. + */ +struct rcu_state { + struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */ + struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */ + u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */ + u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */ + struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */ + + /* The following fields are guarded by the root rcu_node's lock. */ + + u8 signaled ____cacheline_internodealigned_in_smp; + /* Force QS state. */ + long gpnum; /* Current gp number. */ + long completed; /* # of last completed gp. */ + spinlock_t onofflock; /* exclude on/offline and */ + /* starting new GP. */ + spinlock_t fqslock; /* Only one task forcing */ + /* quiescent states. */ + unsigned long jiffies_force_qs; /* Time at which to invoke */ + /* force_quiescent_state(). */ + unsigned long n_force_qs; /* Number of calls to */ + /* force_quiescent_state(). */ + unsigned long n_force_qs_lh; /* ~Number of calls leaving */ + /* due to lock unavailable. */ + unsigned long n_force_qs_ngp; /* Number of calls leaving */ + /* due to no GP active. */ +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR + unsigned long gp_start; /* Time at which GP started, */ + /* but in jiffies. */ + unsigned long jiffies_stall; /* Time at which to check */ + /* for CPU stalls. */ +#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ +#ifdef CONFIG_NO_HZ + long dynticks_completed; /* Value of completed @ snap. */ +#endif /* #ifdef CONFIG_NO_HZ */ +}; + +extern struct rcu_state rcu_state; +DECLARE_PER_CPU(struct rcu_data, rcu_data); + +extern struct rcu_state rcu_bh_state; +DECLARE_PER_CPU(struct rcu_data, rcu_bh_data); + +/* + * Increment the quiescent state counter. + * The counter is a bit degenerated: We do not need to know + * how many quiescent states passed, just if there was at least + * one since the start of the grace period. Thus just a flag. + */ +static inline void rcu_qsctr_inc(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + rdp->passed_quiesc = 1; + rdp->passed_quiesc_completed = rdp->completed; +} +static inline void rcu_bh_qsctr_inc(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu); + rdp->passed_quiesc = 1; + rdp->passed_quiesc_completed = rdp->completed; +} + +extern int rcu_pending(int cpu); +extern int rcu_needs_cpu(int cpu); + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +extern struct lockdep_map rcu_lock_map; +# define rcu_read_acquire() \ + lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_) +# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_) +#else +# define rcu_read_acquire() do { } while (0) +# define rcu_read_release() do { } while (0) +#endif + +static inline void __rcu_read_lock(void) +{ + preempt_disable(); + __acquire(RCU); + rcu_read_acquire(); +} +static inline void __rcu_read_unlock(void) +{ + rcu_read_release(); + __release(RCU); + preempt_enable(); +} +static inline void __rcu_read_lock_bh(void) +{ + local_bh_disable(); + __acquire(RCU_BH); + rcu_read_acquire(); +} +static inline void __rcu_read_unlock_bh(void) +{ + rcu_read_release(); + __release(RCU_BH); + local_bh_enable(); +} + +#define __synchronize_sched() synchronize_rcu() + +#define call_rcu_sched(head, func) call_rcu(head, func) + +static inline void rcu_init_sched(void) +{ +} + +extern void __rcu_init(void); +extern void rcu_check_callbacks(int cpu, int user); +extern void rcu_restart_cpu(int cpu); + +extern long rcu_batches_completed(void); +extern long rcu_batches_completed_bh(void); + +#ifdef CONFIG_NO_HZ +void rcu_enter_nohz(void); +void rcu_exit_nohz(void); +#else /* CONFIG_NO_HZ */ +static inline void rcu_enter_nohz(void) +{ +} +static inline void rcu_exit_nohz(void) +{ +} +#endif /* CONFIG_NO_HZ */ + +#endif /* __LINUX_RCUTREE_H */ diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index d363467c8f1..b3b35966008 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -118,6 +118,8 @@ void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_entries(struct ring_buffer *buffer); unsigned long ring_buffer_overruns(struct ring_buffer *buffer); +unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu); +unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu); u64 ring_buffer_time_stamp(int cpu); void ring_buffer_normalize_time_stamp(int cpu, u64 *ts); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 4e4f1277f3b..feb3b939ec4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -158,6 +158,8 @@ /* SH-SCI */ #define PORT_SCIFA 83 +#define PORT_S3C6400 84 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/linux/slab.h b/include/linux/slab.h index 000da12b5cf..f96d13c281e 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -253,9 +253,9 @@ static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, * request comes from. */ #if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) -extern void *__kmalloc_track_caller(size_t, gfp_t, void*); +extern void *__kmalloc_track_caller(size_t, gfp_t, unsigned long); #define kmalloc_track_caller(size, flags) \ - __kmalloc_track_caller(size, flags, __builtin_return_address(0)) + __kmalloc_track_caller(size, flags, _RET_IP_) #else #define kmalloc_track_caller(size, flags) \ __kmalloc(size, flags) @@ -271,10 +271,10 @@ extern void *__kmalloc_track_caller(size_t, gfp_t, void*); * allocation request comes from. */ #if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) -extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); +extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, unsigned long); #define kmalloc_node_track_caller(size, flags, node) \ __kmalloc_node_track_caller(size, flags, node, \ - __builtin_return_address(0)) + _RET_IP_) #else #define kmalloc_node_track_caller(size, flags, node) \ __kmalloc_node(size, flags, node) @@ -285,7 +285,7 @@ extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); #define kmalloc_node_track_caller(size, flags, node) \ kmalloc_track_caller(size, flags) -#endif /* DEBUG_SLAB */ +#endif /* CONFIG_NUMA */ /* * Shortcuts diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 6f0ee1b84a4..c39a21040dc 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -58,6 +58,7 @@ struct rpc_clnt { struct rpc_timeout cl_timeout_default; struct rpc_program * cl_program; char cl_inline_name[32]; + char *cl_principal; /* target to authenticate to */ }; /* @@ -108,6 +109,7 @@ struct rpc_create_args { u32 version; rpc_authflavor_t authflavor; unsigned long flags; + char *client_name; }; /* Values for "flags" field */ diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 51b977a4ca2..cea764c2359 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -15,6 +15,7 @@ struct rpc_pipe_ops { ssize_t (*upcall)(struct file *, struct rpc_pipe_msg *, char __user *, size_t); ssize_t (*downcall)(struct file *, const char __user *, size_t); void (*release_pipe)(struct inode *); + int (*open_pipe)(struct inode *); void (*destroy_msg)(struct rpc_pipe_msg *); }; diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h index c9165d9771a..ca7d725861f 100644 --- a/include/linux/sunrpc/svcauth_gss.h +++ b/include/linux/sunrpc/svcauth_gss.h @@ -20,6 +20,7 @@ int gss_svc_init(void); void gss_svc_shutdown(void); int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name); u32 svcauth_gss_flavor(struct auth_domain *dom); +char *svc_gss_principal(struct svc_rqst *); #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_SVCAUTH_GSS_H */ diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index e4057d729f0..49e1eb45446 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -37,21 +37,6 @@ struct xdr_netobj { typedef int (*kxdrproc_t)(void *rqstp, __be32 *data, void *obj); /* - * We're still requiring the BKL in the xdr code until it's been - * more carefully audited, at which point this wrapper will become - * unnecessary. - */ -static inline int rpc_call_xdrproc(kxdrproc_t xdrproc, void *rqstp, __be32 *data, void *obj) -{ - int ret; - - lock_kernel(); - ret = xdrproc(rqstp, data, obj); - unlock_kernel(); - return ret; -} - -/* * Basic structure for transmission/reception of a client XDR message. * Features a header (for a linear buffer containing RPC headers * and the data payload for short messages), and then an array of diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 4d80a118d53..11fc71d50c1 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -76,8 +76,7 @@ struct rpc_rqst { struct list_head rq_list; __u32 * rq_buffer; /* XDR encode buffer */ - size_t rq_bufsize, - rq_callsize, + size_t rq_callsize, rq_rcvsize; struct xdr_buf rq_private_buf; /* The receive buffer diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h index b18ec5533e8..325af1de035 100644 --- a/include/linux/swiotlb.h +++ b/include/linux/swiotlb.h @@ -7,9 +7,31 @@ struct device; struct dma_attrs; struct scatterlist; +/* + * Maximum allowable number of contiguous slabs to map, + * must be a power of 2. What is the appropriate value ? + * The complexity of {map,unmap}_single is linearly dependent on this value. + */ +#define IO_TLB_SEGSIZE 128 + + +/* + * log of the size of each IO TLB slab. The number of slabs is command line + * controllable. + */ +#define IO_TLB_SHIFT 11 + extern void swiotlb_init(void); +extern void *swiotlb_alloc_boot(size_t bytes, unsigned long nslabs); +extern void *swiotlb_alloc(unsigned order, unsigned long nslabs); + +extern dma_addr_t swiotlb_phys_to_bus(phys_addr_t address); +extern phys_addr_t swiotlb_bus_to_phys(dma_addr_t address); + +extern int swiotlb_arch_range_needs_mapping(void *ptr, size_t size); + extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flags); diff --git a/include/linux/timex.h b/include/linux/timex.h index 9007313b5b7..998a55d80ac 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -53,47 +53,11 @@ #ifndef _LINUX_TIMEX_H #define _LINUX_TIMEX_H -#include <linux/compiler.h> #include <linux/time.h> -#include <asm/param.h> - #define NTP_API 4 /* NTP API version */ /* - * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen - * for a slightly underdamped convergence characteristic. SHIFT_KH - * establishes the damping of the FLL and is chosen by wisdom and black - * art. - * - * MAXTC establishes the maximum time constant of the PLL. With the - * SHIFT_KG and SHIFT_KF values given and a time constant range from - * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, - * respectively. - */ -#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ -#define SHIFT_FLL 2 /* FLL frequency factor (shift) */ -#define MAXTC 10 /* maximum time constant (shift) */ - -/* - * SHIFT_USEC defines the scaling (shift) of the time_freq and - * time_tolerance variables, which represent the current frequency - * offset and maximum frequency tolerance. - */ -#define SHIFT_USEC 16 /* frequency offset scale (shift) */ -#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) -#define PPM_SCALE_INV_SHIFT 19 -#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ - PPM_SCALE + 1) - -#define MAXPHASE 500000000l /* max phase error (ns) */ -#define MAXFREQ 500000 /* max frequency error (ns/s) */ -#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) -#define MINSEC 256 /* min interval between updates (s) */ -#define MAXSEC 2048 /* max interval between updates (s) */ -#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */ - -/* * syscall interface - used (mainly by NTP daemon) * to discipline kernel clock oscillator */ @@ -199,9 +163,46 @@ struct timex { #define TIME_BAD TIME_ERROR /* bw compat */ #ifdef __KERNEL__ +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/param.h> + #include <asm/timex.h> /* + * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen + * for a slightly underdamped convergence characteristic. SHIFT_KH + * establishes the damping of the FLL and is chosen by wisdom and black + * art. + * + * MAXTC establishes the maximum time constant of the PLL. With the + * SHIFT_KG and SHIFT_KF values given and a time constant range from + * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, + * respectively. + */ +#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ +#define SHIFT_FLL 2 /* FLL frequency factor (shift) */ +#define MAXTC 10 /* maximum time constant (shift) */ + +/* + * SHIFT_USEC defines the scaling (shift) of the time_freq and + * time_tolerance variables, which represent the current frequency + * offset and maximum frequency tolerance. + */ +#define SHIFT_USEC 16 /* frequency offset scale (shift) */ +#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) +#define PPM_SCALE_INV_SHIFT 19 +#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ + PPM_SCALE + 1) + +#define MAXPHASE 500000000l /* max phase error (ns) */ +#define MAXFREQ 500000 /* max frequency error (ns/s) */ +#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) +#define MINSEC 256 /* min interval between updates (s) */ +#define MAXSEC 2048 /* max interval between updates (s) */ +#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */ + +/* * kernel variables * Note: maximum error = NTP synch distance = dispersion + delay / 2; * estimated error = NTP dispersion. diff --git a/include/linux/types.h b/include/linux/types.h index 1d98330b1f2..121f349cb7e 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -135,19 +135,14 @@ typedef __s64 int64_t; * * Linux always considers sectors to be 512 bytes long independently * of the devices real block size. + * + * blkcnt_t is the type of the inode's block count. */ #ifdef CONFIG_LBD typedef u64 sector_t; -#else -typedef unsigned long sector_t; -#endif - -/* - * The type of the inode's block count. - */ -#ifdef CONFIG_LSF typedef u64 blkcnt_t; #else +typedef unsigned long sector_t; typedef unsigned long blkcnt_t; #endif diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h index fec6decfb98..6b58367d145 100644 --- a/include/linux/uaccess.h +++ b/include/linux/uaccess.h @@ -78,7 +78,7 @@ static inline unsigned long __copy_from_user_nocache(void *to, \ set_fs(KERNEL_DS); \ pagefault_disable(); \ - ret = __get_user(retval, (__force typeof(retval) __user *)(addr)); \ + ret = __copy_from_user_inatomic(&(retval), (__force typeof(retval) __user *)(addr), sizeof(retval)); \ pagefault_enable(); \ set_fs(old_fs); \ ret; \ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4669d7e72e7..1f126e30766 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -293,6 +293,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ #define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ #define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */ #define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */ @@ -304,6 +305,8 @@ struct v4l2_pix_format { /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ +#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ /* The following formats are not defined in the V4L2 specification */ #define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ @@ -1050,7 +1053,7 @@ enum v4l2_mpeg_video_bitrate_mode { #define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210) #define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211) -/* MPEG-class control IDs specific to the CX2584x driver as defined by V4L2 */ +/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) enum v4l2_mpeg_cx2341x_video_spatial_filter_mode { @@ -1117,6 +1120,12 @@ enum v4l2_exposure_auto_type { #define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11) #define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12) +#define V4L2_CID_ZOOM_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+13) +#define V4L2_CID_ZOOM_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+14) +#define V4L2_CID_ZOOM_CONTINUOUS (V4L2_CID_CAMERA_CLASS_BASE+15) + +#define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16) + /* * T U N I N G */ @@ -1369,6 +1378,7 @@ struct v4l2_streamparm { #define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ #define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver ID */ #define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ +#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ struct v4l2_register { __u32 match_type; /* Match type */ @@ -1458,6 +1468,8 @@ struct v4l2_chip_ident { #define VIDIOC_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_chip_ident) #endif #define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) +/* Reminder: when adding new ioctls please add support for them to + drivers/media/video/v4l2-compat-ioctl32.c as well! */ #ifdef __OLD_VIDIOC_ /* for compatibility, will go away some day */ diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index c30c7bfbf39..8726ff77763 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -10,6 +10,9 @@ /* The feature bitmap for virtio balloon */ #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ +/* Size of a PFN in the balloon interface. */ +#define VIRTIO_BALLOON_PFN_SHIFT 12 + struct virtio_balloon_config { /* Number of pages host wants Guest to give up. */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index 19a0da0dba4..7615ffcdd55 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -7,6 +7,17 @@ /* The ID for virtio console */ #define VIRTIO_ID_CONSOLE 3 +/* Feature bits */ +#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ + +struct virtio_console_config { + /* colums of the screens */ + __u16 cols; + /* rows of the screens */ + __u16 rows; +} __attribute__((packed)); + + #ifdef __KERNEL__ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)); #endif /* __KERNEL__ */ diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h index cdef3574293..cd0fd5d181a 100644 --- a/include/linux/virtio_pci.h +++ b/include/linux/virtio_pci.h @@ -53,4 +53,12 @@ /* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0 + +/* How many bits to shift physical queue address written to QUEUE_PFN. + * 12 is historical, and due to x86 page size. */ +#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12 + +/* The alignment to use between consumer and producer parts of vring. + * x86 pagesize again. */ +#define VIRTIO_PCI_VRING_ALIGN 4096 #endif diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index c4a598fb382..71e03722fb5 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -83,7 +83,7 @@ struct vring { * __u16 avail_idx; * __u16 available[num]; * - * // Padding to the next page boundary. + * // Padding to the next align boundary. * char pad[]; * * // A ring of used descriptor heads with free-running index. @@ -93,19 +93,19 @@ struct vring { * }; */ static inline void vring_init(struct vring *vr, unsigned int num, void *p, - unsigned long pagesize) + unsigned long align) { vr->num = num; vr->desc = p; vr->avail = p + num*sizeof(struct vring_desc); - vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + pagesize-1) - & ~(pagesize - 1)); + vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1) + & ~(align - 1)); } -static inline unsigned vring_size(unsigned int num, unsigned long pagesize) +static inline unsigned vring_size(unsigned int num, unsigned long align) { return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num) - + pagesize - 1) & ~(pagesize - 1)) + + align - 1) & ~(align - 1)) + sizeof(__u16) * 2 + sizeof(struct vring_used_elem) * num; } @@ -115,6 +115,7 @@ struct virtio_device; struct virtqueue; struct virtqueue *vring_new_virtqueue(unsigned int num, + unsigned int vring_align, struct virtio_device *vdev, void *pages, void (*notify)(struct virtqueue *vq), diff --git a/include/media/i2c-addr.h b/include/media/i2c-addr.h index e7ff44a35ca..5d0f56054d2 100644 --- a/include/media/i2c-addr.h +++ b/include/media/i2c-addr.h @@ -12,8 +12,6 @@ /* bttv address list */ #define I2C_ADDR_TSA5522 0xc2 #define I2C_ADDR_TDA7432 0x8a -#define I2C_ADDR_BT832_ALT1 0x88 -#define I2C_ADDR_BT832_ALT2 0x8a // alternate setting #define I2C_ADDR_TDA8425 0x82 #define I2C_ADDR_TDA9840 0x84 #define I2C_ADDR_TDA9850 0xb6 /* also used by 9855,9873 */ diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 38f2d93c395..5bf2ea00678 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -157,6 +157,8 @@ extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE]; #endif /* diff --git a/include/media/ov772x.h b/include/media/ov772x.h new file mode 100644 index 00000000000..e391d55edb9 --- /dev/null +++ b/include/media/ov772x.h @@ -0,0 +1,21 @@ +/* ov772x Camera + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OV772X_H__ +#define __OV772X_H__ + +#include <media/soc_camera.h> + +struct ov772x_camera_info { + unsigned long buswidth; + struct soc_camera_link link; +}; + +#endif /* __OV772X_H__ */ diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h index 1d104096619..6bbb0d93bb5 100644 --- a/include/media/saa7146_vv.h +++ b/include/media/saa7146_vv.h @@ -216,8 +216,7 @@ void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data); extern struct saa7146_use_ops saa7146_video_uops; int saa7146_start_preview(struct saa7146_fh *fh); int saa7146_stop_preview(struct saa7146_fh *fh); -int saa7146_video_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg); +int saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg); /* from saa7146_vbi.c */ extern struct saa7146_use_ops saa7146_vbi_uops; diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index c5de7bb19fd..425b6a98c95 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -12,9 +12,10 @@ #ifndef SOC_CAMERA_H #define SOC_CAMERA_H +#include <linux/mutex.h> +#include <linux/pm.h> #include <linux/videodev2.h> #include <media/videobuf-core.h> -#include <linux/pm.h> struct soc_camera_device { struct list_head list; @@ -36,14 +37,19 @@ struct soc_camera_device { unsigned char iface; /* Host number */ unsigned char devnum; /* Device number per host */ unsigned char buswidth; /* See comment in .c */ + struct soc_camera_sense *sense; /* See comment in struct definition */ struct soc_camera_ops *ops; struct video_device *vdev; const struct soc_camera_data_format *current_fmt; const struct soc_camera_data_format *formats; int num_formats; + struct soc_camera_format_xlate *user_formats; + int num_user_formats; struct module *owner; - /* soc_camera.c private count. Only accessed with video_lock held */ + void *host_priv; /* Per-device host private data */ + /* soc_camera.c private count. Only accessed with .video_lock held */ int use_count; + struct mutex video_lock; /* Protects device data */ }; struct soc_camera_file { @@ -56,7 +62,7 @@ struct soc_camera_host { struct device dev; unsigned char nr; /* Host number */ void *priv; - char *drv_name; + const char *drv_name; struct soc_camera_host_ops *ops; }; @@ -64,25 +70,33 @@ struct soc_camera_host_ops { struct module *owner; int (*add)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); - int (*suspend)(struct soc_camera_device *, pm_message_t state); + int (*suspend)(struct soc_camera_device *, pm_message_t); int (*resume)(struct soc_camera_device *); - int (*set_fmt_cap)(struct soc_camera_device *, __u32, - struct v4l2_rect *); - int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); + int (*get_formats)(struct soc_camera_device *, int, + struct soc_camera_format_xlate *); + int (*set_fmt)(struct soc_camera_device *, __u32, struct v4l2_rect *); + int (*try_fmt)(struct soc_camera_device *, struct v4l2_format *); void (*init_videobuf)(struct videobuf_queue *, struct soc_camera_device *); int (*reqbufs)(struct soc_camera_file *, struct v4l2_requestbuffers *); int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); - int (*try_bus_param)(struct soc_camera_device *, __u32); int (*set_bus_param)(struct soc_camera_device *, __u32); unsigned int (*poll)(struct file *, poll_table *); }; +#define SOCAM_SENSOR_INVERT_PCLK (1 << 0) +#define SOCAM_SENSOR_INVERT_MCLK (1 << 1) +#define SOCAM_SENSOR_INVERT_HSYNC (1 << 2) +#define SOCAM_SENSOR_INVERT_VSYNC (1 << 3) +#define SOCAM_SENSOR_INVERT_DATA (1 << 4) + struct soc_camera_link { /* Camera bus id, used to match a camera and a bus */ int bus_id; /* GPIO number to switch between 8 and 10 bit modes */ unsigned int gpio; + /* Per camera SOCAM_SENSOR_* bus flags */ + unsigned long flags; /* Optional callbacks to power on or off and reset the sensor */ int (*power)(struct device *, int); int (*reset)(struct device *); @@ -106,13 +120,35 @@ extern void soc_camera_device_unregister(struct soc_camera_device *icd); extern int soc_camera_video_start(struct soc_camera_device *icd); extern void soc_camera_video_stop(struct soc_camera_device *icd); +extern const struct soc_camera_data_format *soc_camera_format_by_fourcc( + struct soc_camera_device *icd, unsigned int fourcc); +extern const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc( + struct soc_camera_device *icd, unsigned int fourcc); + struct soc_camera_data_format { - char *name; + const char *name; unsigned int depth; __u32 fourcc; enum v4l2_colorspace colorspace; }; +/** + * struct soc_camera_format_xlate - match between host and sensor formats + * @cam_fmt: sensor format provided by the sensor + * @host_fmt: host format after host translation from cam_fmt + * @buswidth: bus width for this format + * + * Host and sensor translation structure. Used in table of host and sensor + * formats matchings in soc_camera_device. A host can override the generic list + * generation by implementing get_formats(), and use it for format checks and + * format setup. + */ +struct soc_camera_format_xlate { + const struct soc_camera_data_format *cam_fmt; + const struct soc_camera_data_format *host_fmt; + unsigned char buswidth; +}; + struct soc_camera_ops { struct module *owner; int (*probe)(struct soc_camera_device *); @@ -123,13 +159,14 @@ struct soc_camera_ops { int (*release)(struct soc_camera_device *); int (*start_capture)(struct soc_camera_device *); int (*stop_capture)(struct soc_camera_device *); - int (*set_fmt_cap)(struct soc_camera_device *, __u32, - struct v4l2_rect *); - int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); + int (*set_fmt)(struct soc_camera_device *, __u32, struct v4l2_rect *); + int (*try_fmt)(struct soc_camera_device *, struct v4l2_format *); unsigned long (*query_bus_param)(struct soc_camera_device *); int (*set_bus_param)(struct soc_camera_device *, unsigned long); int (*get_chip_id)(struct soc_camera_device *, struct v4l2_chip_ident *); + int (*set_std)(struct soc_camera_device *, v4l2_std_id *); + int (*enum_input)(struct soc_camera_device *, struct v4l2_input *); #ifdef CONFIG_VIDEO_ADV_DEBUG int (*get_register)(struct soc_camera_device *, struct v4l2_register *); int (*set_register)(struct soc_camera_device *, struct v4l2_register *); @@ -140,6 +177,32 @@ struct soc_camera_ops { int num_controls; }; +#define SOCAM_SENSE_PCLK_CHANGED (1 << 0) + +/** + * This struct can be attached to struct soc_camera_device by the host driver + * to request sense from the camera, for example, when calling .set_fmt(). The + * host then can check which flags are set and verify respective values if any. + * For example, if SOCAM_SENSE_PCLK_CHANGED is set, it means, pixclock has + * changed during this operation. After completion the host should detach sense. + * + * @flags ored SOCAM_SENSE_* flags + * @master_clock if the host wants to be informed about pixel-clock + * change, it better set master_clock. + * @pixel_clock_max maximum pixel clock frequency supported by the host, + * camera is not allowed to exceed this. + * @pixel_clock if the camera driver changed pixel clock during this + * operation, it sets SOCAM_SENSE_PCLK_CHANGED, uses + * master_clock to calculate the new pixel-clock and + * sets this field. + */ +struct soc_camera_sense { + unsigned long flags; + unsigned long master_clock; + unsigned long pixel_clock_max; + unsigned long pixel_clock; +}; + static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( struct soc_camera_ops *ops, int id) { @@ -158,15 +221,20 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( #define SOCAM_HSYNC_ACTIVE_LOW (1 << 3) #define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4) #define SOCAM_VSYNC_ACTIVE_LOW (1 << 5) -#define SOCAM_DATAWIDTH_8 (1 << 6) -#define SOCAM_DATAWIDTH_9 (1 << 7) -#define SOCAM_DATAWIDTH_10 (1 << 8) -#define SOCAM_DATAWIDTH_16 (1 << 9) -#define SOCAM_PCLK_SAMPLE_RISING (1 << 10) -#define SOCAM_PCLK_SAMPLE_FALLING (1 << 11) +#define SOCAM_DATAWIDTH_4 (1 << 6) +#define SOCAM_DATAWIDTH_8 (1 << 7) +#define SOCAM_DATAWIDTH_9 (1 << 8) +#define SOCAM_DATAWIDTH_10 (1 << 9) +#define SOCAM_DATAWIDTH_15 (1 << 10) +#define SOCAM_DATAWIDTH_16 (1 << 11) +#define SOCAM_PCLK_SAMPLE_RISING (1 << 12) +#define SOCAM_PCLK_SAMPLE_FALLING (1 << 13) +#define SOCAM_DATA_ACTIVE_HIGH (1 << 14) +#define SOCAM_DATA_ACTIVE_LOW (1 << 15) -#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_9 | \ - SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_16) +#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \ + SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \ + SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16) static inline unsigned long soc_camera_bus_param_compatible( unsigned long camera_flags, unsigned long bus_flags) @@ -182,4 +250,7 @@ static inline unsigned long soc_camera_bus_param_compatible( return (!hsync || !vsync || !pclk) ? 0 : common_flags; } +extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl, + unsigned long flags); + #endif diff --git a/include/media/tvp514x.h b/include/media/tvp514x.h new file mode 100644 index 00000000000..5e7ee968c6d --- /dev/null +++ b/include/media/tvp514x.h @@ -0,0 +1,118 @@ +/* + * drivers/media/video/tvp514x.h + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Contributors: + * Sivaraj R <sivaraj@ti.com> + * Brijesh R Jadav <brijesh.j@ti.com> + * Hardik Shah <hardik.shah@ti.com> + * Manjunath Hadli <mrh@ti.com> + * Karicheri Muralidharan <m-karicheri2@ti.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _TVP514X_H +#define _TVP514X_H + +/* + * Other macros + */ +#define TVP514X_MODULE_NAME "tvp514x" + +#define TVP514X_XCLK_BT656 (27000000) + +/* Number of pixels and number of lines per frame for different standards */ +#define NTSC_NUM_ACTIVE_PIXELS (720) +#define NTSC_NUM_ACTIVE_LINES (480) +#define PAL_NUM_ACTIVE_PIXELS (720) +#define PAL_NUM_ACTIVE_LINES (576) + +/** + * enum tvp514x_input - enum for different decoder input pin + * configuration. + */ +enum tvp514x_input { + /* + * CVBS input selection + */ + INPUT_CVBS_VI1A = 0x0, + INPUT_CVBS_VI1B, + INPUT_CVBS_VI1C, + INPUT_CVBS_VI2A = 0x04, + INPUT_CVBS_VI2B, + INPUT_CVBS_VI2C, + INPUT_CVBS_VI3A = 0x08, + INPUT_CVBS_VI3B, + INPUT_CVBS_VI3C, + INPUT_CVBS_VI4A = 0x0C, + /* + * S-Video input selection + */ + INPUT_SVIDEO_VI2A_VI1A = 0x44, + INPUT_SVIDEO_VI2B_VI1B, + INPUT_SVIDEO_VI2C_VI1C, + INPUT_SVIDEO_VI2A_VI3A = 0x54, + INPUT_SVIDEO_VI2B_VI3B, + INPUT_SVIDEO_VI2C_VI3C, + INPUT_SVIDEO_VI4A_VI1A = 0x4C, + INPUT_SVIDEO_VI4A_VI1B, + INPUT_SVIDEO_VI4A_VI1C, + INPUT_SVIDEO_VI4A_VI3A = 0x5C, + INPUT_SVIDEO_VI4A_VI3B, + INPUT_SVIDEO_VI4A_VI3C, + + /* Need to add entries for + * RGB, YPbPr and SCART. + */ + INPUT_INVALID +}; + +/** + * enum tvp514x_output - enum for output format + * supported. + * + */ +enum tvp514x_output { + OUTPUT_10BIT_422_EMBEDDED_SYNC = 0, + OUTPUT_20BIT_422_SEPERATE_SYNC, + OUTPUT_10BIT_422_SEPERATE_SYNC = 3, + OUTPUT_INVALID +}; + +/** + * struct tvp514x_platform_data - Platform data values and access functions. + * @power_set: Power state access function, zero is off, non-zero is on. + * @ifparm: Interface parameters access function. + * @priv_data_set: Device private data (pointer) access function. + * @clk_polarity: Clock polarity of the current interface. + * @ hs_polarity: HSYNC Polarity configuration for current interface. + * @ vs_polarity: VSYNC Polarity configuration for current interface. + */ +struct tvp514x_platform_data { + char *master; + int (*power_set) (enum v4l2_power on); + int (*ifparm) (struct v4l2_ifparm *p); + int (*priv_data_set) (void *); + /* Interface control params */ + bool clk_polarity; + bool hs_polarity; + bool vs_polarity; +}; + + +#endif /* ifndef _TVP514X_H */ diff --git a/include/media/tw9910.h b/include/media/tw9910.h new file mode 100644 index 00000000000..73231e7880d --- /dev/null +++ b/include/media/tw9910.h @@ -0,0 +1,39 @@ +/* + * tw9910 Driver header + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on ov772x.h + * + * Copyright (C) Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __TW9910_H__ +#define __TW9910_H__ + +#include <media/soc_camera.h> + +enum tw9910_mpout_pin { + TW9910_MPO_VLOSS, + TW9910_MPO_HLOCK, + TW9910_MPO_SLOCK, + TW9910_MPO_VLOCK, + TW9910_MPO_MONO, + TW9910_MPO_DET50, + TW9910_MPO_FIELD, + TW9910_MPO_RTCO, +}; + +struct tw9910_video_info { + unsigned long buswidth; + enum tw9910_mpout_pin mpout; + struct soc_camera_link link; +}; + + +#endif /* __TW9910_H__ */ diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index d73a8e9028a..43dbb659f1f 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -60,6 +60,8 @@ enum { /* OmniVision sensors: reserved range 250-299 */ V4L2_IDENT_OV7670 = 250, + V4L2_IDENT_OV7720 = 251, + V4L2_IDENT_OV7725 = 252, /* Conexant MPEG encoder/decoders: reserved range 410-420 */ V4L2_IDENT_CX23415 = 415, @@ -69,6 +71,9 @@ enum { /* module vp27smpx: just ident 2700 */ V4L2_IDENT_VP27SMPX = 2700, + /* module tvp5150 */ + V4L2_IDENT_TVP5150 = 5150, + /* module cs5345: just ident 5345 */ V4L2_IDENT_CS5345 = 5345, @@ -82,6 +87,9 @@ enum { /* module wm8775: just ident 8775 */ V4L2_IDENT_WM8775 = 8775, + /* module tw9910: just ident 9910 */ + V4L2_IDENT_TW9910 = 9910, + /* module cs53132a: just ident 53132 */ V4L2_IDENT_CS53l32A = 53132, @@ -166,8 +174,10 @@ enum { V4L2_IDENT_MT9M001C12ST = 45000, V4L2_IDENT_MT9M001C12STM = 45005, V4L2_IDENT_MT9M111 = 45007, + V4L2_IDENT_MT9M112 = 45008, V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */ V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */ + V4L2_IDENT_MT9T031 = 45020, }; #endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 2f8719abf5c..f99c866d8c3 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -57,6 +57,29 @@ /* ------------------------------------------------------------------------- */ +/* These printk constructs can be used with v4l2_device and v4l2_subdev */ +#define v4l2_printk(level, dev, fmt, arg...) \ + printk(level "%s: " fmt, (dev)->name , ## arg) + +#define v4l2_err(dev, fmt, arg...) \ + v4l2_printk(KERN_ERR, dev, fmt , ## arg) + +#define v4l2_warn(dev, fmt, arg...) \ + v4l2_printk(KERN_WARNING, dev, fmt , ## arg) + +#define v4l2_info(dev, fmt, arg...) \ + v4l2_printk(KERN_INFO, dev, fmt , ## arg) + +/* These three macros assume that the debug level is set with a module + parameter called 'debug'. */ +#define v4l2_dbg(level, debug, dev, fmt, arg...) \ + do { \ + if (debug >= (level)) \ + v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ + } while (0) + +/* ------------------------------------------------------------------------- */ + /* Priority helper functions */ struct v4l2_prio_state { @@ -104,11 +127,29 @@ struct i2c_driver; struct i2c_adapter; struct i2c_client; struct i2c_device_id; +struct v4l2_device; +struct v4l2_subdev; +struct v4l2_subdev_ops; int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver *driver, const char *name, int (*probe)(struct i2c_client *, const struct i2c_device_id *)); +/* Load an i2c module and return an initialized v4l2_subdev struct. + Only call request_module if module_name != NULL. + The client_type argument is the name of the chip that's on the adapter. */ +struct v4l2_subdev *v4l2_i2c_new_subdev(struct i2c_adapter *adapter, + const char *module_name, const char *client_type, u8 addr); +/* Probe and load an i2c module and return an initialized v4l2_subdev struct. + Only call request_module if module_name != NULL. + The client_type argument is the name of the chip that's on the adapter. */ +struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + const unsigned short *addrs); +/* Initialize an v4l2_subdev with data from an i2c_client struct */ +void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, + const struct v4l2_subdev_ops *ops); + /* ------------------------------------------------------------------------- */ /* Internal ioctls */ diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index a0a6b41c5e0..0a88d1d17d3 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -25,6 +25,12 @@ #define VFL_TYPE_MAX 4 struct v4l2_ioctl_callbacks; +struct v4l2_device; + +/* Flag to mark the video_device struct as unregistered. + Drivers can set this flag if they want to block all future + device access. It is set by video_unregister_device. */ +#define V4L2_FL_UNREGISTERED (0) /* * Newer version of video_device, handled by videodev2.c @@ -39,15 +45,20 @@ struct video_device /* sysfs */ struct device dev; /* v4l device */ - struct cdev cdev; /* character device */ - void (*cdev_release)(struct kobject *kobj); + struct cdev *cdev; /* character device */ + + /* Set either parent or v4l2_dev if your driver uses v4l2_device */ struct device *parent; /* device parent */ + struct v4l2_device *v4l2_dev; /* v4l2_device parent */ /* device info */ char name[32]; int vfl_type; + /* 'minor' is set to -1 if the registration failed */ int minor; u16 num; + /* use bitops to set/clear/test flags */ + unsigned long flags; /* attribute to differentiate multiple indices on one physical device */ int index; @@ -58,7 +69,7 @@ struct video_device v4l2_std_id current_norm; /* Current tvnorm */ /* callbacks */ - void (*release)(struct video_device *vfd); + void (*release)(struct video_device *vdev); /* ioctl callbacks */ const struct v4l2_ioctl_ops *ioctl_ops; @@ -67,36 +78,41 @@ struct video_device /* dev to video-device */ #define to_video_device(cd) container_of(cd, struct video_device, dev) -/* Register and unregister devices. Note that if video_register_device fails, +/* Register video devices. Note that if video_register_device fails, the release() callback of the video_device structure is *not* called, so the caller is responsible for freeing any data. Usually that means that - you call video_device_release() on failure. */ -int __must_check video_register_device(struct video_device *vfd, int type, int nr); -int __must_check video_register_device_index(struct video_device *vfd, + you call video_device_release() on failure. + + Also note that vdev->minor is set to -1 if the registration failed. */ +int __must_check video_register_device(struct video_device *vdev, int type, int nr); +int __must_check video_register_device_index(struct video_device *vdev, int type, int nr, int index); -void video_unregister_device(struct video_device *vfd); + +/* Unregister video devices. Will do nothing if vdev == NULL or + vdev->minor < 0. */ +void video_unregister_device(struct video_device *vdev); /* helper functions to alloc/release struct video_device, the latter can also be used for video_device->release(). */ struct video_device * __must_check video_device_alloc(void); -/* this release function frees the vfd pointer */ -void video_device_release(struct video_device *vfd); +/* this release function frees the vdev pointer */ +void video_device_release(struct video_device *vdev); /* this release function does nothing, use when the video_device is a static global struct. Note that having a static video_device is a dubious construction at best. */ -void video_device_release_empty(struct video_device *vfd); +void video_device_release_empty(struct video_device *vdev); /* helper functions to access driver private data. */ -static inline void *video_get_drvdata(struct video_device *dev) +static inline void *video_get_drvdata(struct video_device *vdev) { - return dev_get_drvdata(&dev->dev); + return dev_get_drvdata(&vdev->dev); } -static inline void video_set_drvdata(struct video_device *dev, void *data) +static inline void video_set_drvdata(struct video_device *vdev, void *data) { - dev_set_drvdata(&dev->dev, data); + dev_set_drvdata(&vdev->dev, data); } struct video_device *video_devdata(struct file *file); @@ -108,4 +124,9 @@ static inline void *video_drvdata(struct file *file) return video_get_drvdata(video_devdata(file)); } +static inline int video_is_unregistered(struct video_device *vdev) +{ + return test_bit(V4L2_FL_UNREGISTERED, &vdev->flags); +} + #endif /* _V4L2_DEV_H */ diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h new file mode 100644 index 00000000000..97b283a0428 --- /dev/null +++ b/include/media/v4l2-device.h @@ -0,0 +1,109 @@ +/* + V4L2 device support header. + + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _V4L2_DEVICE_H +#define _V4L2_DEVICE_H + +#include <media/v4l2-subdev.h> + +/* Each instance of a V4L2 device should create the v4l2_device struct, + either stand-alone or embedded in a larger struct. + + It allows easy access to sub-devices (see v4l2-subdev.h) and provides + basic V4L2 device-level support. + */ + +#define V4L2_DEVICE_NAME_SIZE (BUS_ID_SIZE + 16) + +struct v4l2_device { + /* dev->driver_data points to this struct */ + struct device *dev; + /* used to keep track of the registered subdevs */ + struct list_head subdevs; + /* lock this struct; can be used by the driver as well if this + struct is embedded into a larger struct. */ + spinlock_t lock; + /* unique device name, by default the driver name + bus ID */ + char name[V4L2_DEVICE_NAME_SIZE]; +}; + +/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev */ +int __must_check v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); +/* Set v4l2_dev->dev->driver_data to NULL and unregister all sub-devices */ +void v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +/* Register a subdev with a v4l2 device. While registered the subdev module + is marked as in-use. An error is returned if the module is no longer + loaded when you attempt to register it. */ +int __must_check v4l2_device_register_subdev(struct v4l2_device *dev, struct v4l2_subdev *sd); +/* Unregister a subdev with a v4l2 device. Can also be called if the subdev + wasn't registered. In that case it will do nothing. */ +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); + +/* Iterate over all subdevs. */ +#define v4l2_device_for_each_subdev(sd, dev) \ + list_for_each_entry(sd, &(dev)->subdevs, list) + +/* Call the specified callback for all subdevs matching the condition. + Ignore any errors. Note that you cannot add or delete a subdev + while walking the subdevs list. */ +#define __v4l2_device_call_subdevs(dev, cond, o, f, args...) \ + do { \ + struct v4l2_subdev *sd; \ + \ + list_for_each_entry(sd, &(dev)->subdevs, list) \ + if ((cond) && sd->ops->o && sd->ops->o->f) \ + sd->ops->o->f(sd , ##args); \ + } while (0) + +/* Call the specified callback for all subdevs matching the condition. + If the callback returns an error other than 0 or -ENOIOCTLCMD, then + return with that error code. Note that you cannot add or delete a + subdev while walking the subdevs list. */ +#define __v4l2_device_call_subdevs_until_err(dev, cond, o, f, args...) \ +({ \ + struct v4l2_subdev *sd; \ + int err = 0; \ + \ + list_for_each_entry(sd, &(dev)->subdevs, list) { \ + if ((cond) && sd->ops->o && sd->ops->o->f) \ + err = sd->ops->o->f(sd , ##args); \ + if (err && err != -ENOIOCTLCMD) \ + break; \ + } \ + (err == -ENOIOCTLCMD) ? 0 : err; \ +}) + +/* Call the specified callback for all subdevs matching grp_id (if 0, then + match them all). Ignore any errors. Note that you cannot add or delete + a subdev while walking the subdevs list. */ +#define v4l2_device_call_all(dev, grp_id, o, f, args...) \ + __v4l2_device_call_subdevs(dev, \ + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + +/* Call the specified callback for all subdevs matching grp_id (if 0, then + match them all). If the callback returns an error other than 0 or + -ENOIOCTLCMD, then return with that error code. Note that you cannot + add or delete a subdev while walking the subdevs list. */ +#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) \ + __v4l2_device_call_subdevs_until_err(dev, \ + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + +#endif diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h index 9c2df41dbf9..ecda3c72583 100644 --- a/include/media/v4l2-int-device.h +++ b/include/media/v4l2-int-device.h @@ -183,6 +183,9 @@ enum v4l2_int_ioctl_num { vidioc_int_s_crop_num, vidioc_int_g_parm_num, vidioc_int_s_parm_num, + vidioc_int_querystd_num, + vidioc_int_s_std_num, + vidioc_int_s_video_routing_num, /* * @@ -284,6 +287,9 @@ V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *); V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *); V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *); V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *); +V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *); +V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *); +V4L2_INT_WRAPPER_1(s_video_routing, struct v4l2_routing, *); V4L2_INT_WRAPPER_0(dev_init); V4L2_INT_WRAPPER_0(dev_exit); diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index e6ba25b3d7c..fcdb58c4ce0 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -232,6 +232,12 @@ struct v4l2_ioctl_ops { int (*vidioc_g_chip_ident) (struct file *file, void *fh, struct v4l2_chip_ident *chip); + int (*vidioc_enum_framesizes) (struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize); + + int (*vidioc_enum_frameintervals) (struct file *file, void *fh, + struct v4l2_frmivalenum *fival); + /* For other private ioctls */ int (*vidioc_default) (struct file *file, void *fh, int cmd, void *arg); @@ -285,15 +291,13 @@ extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg); /* Include support for obsoleted stuff */ -extern int video_usercopy(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg, - int (*func)(struct inode *inode, struct file *file, - unsigned int cmd, void *arg)); +extern int video_usercopy(struct file *file, unsigned int cmd, + unsigned long arg, v4l2_kioctl func); /* Standard handlers for V4L ioctl's */ /* This prototype is used on fops.unlocked_ioctl */ -extern int __video_ioctl2(struct file *file, +extern long __video_ioctl2(struct file *file, unsigned int cmd, unsigned long arg); /* This prototype is used on fops.ioctl diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h new file mode 100644 index 00000000000..ceef016bb0b --- /dev/null +++ b/include/media/v4l2-subdev.h @@ -0,0 +1,189 @@ +/* + V4L2 sub-device support header. + + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _V4L2_SUBDEV_H +#define _V4L2_SUBDEV_H + +#include <media/v4l2-common.h> + +struct v4l2_device; +struct v4l2_subdev; +struct tuner_setup; + +/* Sub-devices are devices that are connected somehow to the main bridge + device. These devices are usually audio/video muxers/encoders/decoders or + sensors and webcam controllers. + + Usually these devices are controlled through an i2c bus, but other busses + may also be used. + + The v4l2_subdev struct provides a way of accessing these devices in a + generic manner. Most operations that these sub-devices support fall in + a few categories: core ops, audio ops, video ops and tuner ops. + + More categories can be added if needed, although this should remain a + limited set (no more than approx. 8 categories). + + Each category has its own set of ops that subdev drivers can implement. + + A subdev driver can leave the pointer to the category ops NULL if + it does not implement them (e.g. an audio subdev will generally not + implement the video category ops). The exception is the core category: + this must always be present. + + These ops are all used internally so it is no problem to change, remove + or add ops or move ops from one to another category. Currently these + ops are based on the original ioctls, but since ops are not limited to + one argument there is room for improvement here once all i2c subdev + drivers are converted to use these ops. + */ + +/* Core ops: it is highly recommended to implement at least these ops: + + g_chip_ident + log_status + g_register + s_register + + This provides basic debugging support. + + The ioctl ops is meant for generic ioctl-like commands. Depending on + the use-case it might be better to use subdev-specific ops (currently + not yet implemented) since ops provide proper type-checking. + */ +struct v4l2_subdev_core_ops { + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip); + int (*log_status)(struct v4l2_subdev *sd); + int (*init)(struct v4l2_subdev *sd, u32 val); + int (*s_standby)(struct v4l2_subdev *sd, u32 standby); + int (*reset)(struct v4l2_subdev *sd, u32 val); + int (*s_gpio)(struct v4l2_subdev *sd, u32 val); + int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); + int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); + int (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); +#ifdef CONFIG_VIDEO_ADV_DEBUG + int (*g_register)(struct v4l2_subdev *sd, struct v4l2_register *reg); + int (*s_register)(struct v4l2_subdev *sd, struct v4l2_register *reg); +#endif +}; + +struct v4l2_subdev_tuner_ops { + int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); + int (*s_radio)(struct v4l2_subdev *sd); + int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); + int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); + int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); +}; + +struct v4l2_subdev_audio_ops { + int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); +}; + +struct v4l2_subdev_video_ops { + int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); + int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); + int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); + int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); + int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); + int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap); + int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*s_stream)(struct v4l2_subdev *sd, int enable); + int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); + int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); +}; + +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; +}; + +#define V4L2_SUBDEV_NAME_SIZE 32 + +/* Each instance of a subdev driver should create this struct, either + stand-alone or embedded in a larger struct. + */ +struct v4l2_subdev { + struct list_head list; + struct module *owner; + struct v4l2_device *dev; + const struct v4l2_subdev_ops *ops; + /* name must be unique */ + char name[V4L2_SUBDEV_NAME_SIZE]; + /* can be used to group similar subdevs, value is driver-specific */ + u32 grp_id; + /* pointer to private data */ + void *priv; +}; + +static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) +{ + sd->priv = p; +} + +static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) +{ + return sd->priv; +} + +/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call. + This is used by subdev modules that can be called by both old-style ioctl + commands and through the v4l2_subdev_ops. + + The ioctl API of the subdev driver can call this function to call the + right ops based on the ioctl cmd and arg. + + Once all subdev drivers have been converted and all drivers no longer + use the ioctl interface, then this function can be removed. + */ +int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg); + +static inline void v4l2_subdev_init(struct v4l2_subdev *sd, + const struct v4l2_subdev_ops *ops) +{ + INIT_LIST_HEAD(&sd->list); + /* ops->core MUST be set */ + BUG_ON(!ops || !ops->core); + sd->ops = ops; + sd->dev = NULL; + sd->name[0] = '\0'; + sd->grp_id = 0; + sd->priv = NULL; +} + +/* Call an ops of a v4l2_subdev, doing the right checks against + NULL pointers. + + Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + */ +#define v4l2_subdev_call(sd, o, f, args...) \ + (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \ + (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) + +#endif diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h new file mode 100644 index 00000000000..195ca014d3c --- /dev/null +++ b/include/scsi/fc/fc_els.h @@ -0,0 +1,816 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_ELS_H_ +#define _FC_ELS_H_ + +/* + * Fibre Channel Switch - Enhanced Link Services definitions. + * From T11 FC-LS Rev 1.2 June 7, 2005. + */ + +/* + * ELS Command codes - byte 0 of the frame payload + */ +enum fc_els_cmd { + ELS_LS_RJT = 0x01, /* ESL reject */ + ELS_LS_ACC = 0x02, /* ESL Accept */ + ELS_PLOGI = 0x03, /* N_Port login */ + ELS_FLOGI = 0x04, /* F_Port login */ + ELS_LOGO = 0x05, /* Logout */ + ELS_ABTX = 0x06, /* Abort exchange - obsolete */ + ELS_RCS = 0x07, /* read connection status */ + ELS_RES = 0x08, /* read exchange status block */ + ELS_RSS = 0x09, /* read sequence status block */ + ELS_RSI = 0x0a, /* read sequence initiative */ + ELS_ESTS = 0x0b, /* establish streaming */ + ELS_ESTC = 0x0c, /* estimate credit */ + ELS_ADVC = 0x0d, /* advise credit */ + ELS_RTV = 0x0e, /* read timeout value */ + ELS_RLS = 0x0f, /* read link error status block */ + ELS_ECHO = 0x10, /* echo */ + ELS_TEST = 0x11, /* test */ + ELS_RRQ = 0x12, /* reinstate recovery qualifier */ + ELS_REC = 0x13, /* read exchange concise */ + ELS_SRR = 0x14, /* sequence retransmission request */ + ELS_PRLI = 0x20, /* process login */ + ELS_PRLO = 0x21, /* process logout */ + ELS_SCN = 0x22, /* state change notification */ + ELS_TPLS = 0x23, /* test process login state */ + ELS_TPRLO = 0x24, /* third party process logout */ + ELS_LCLM = 0x25, /* login control list mgmt (obs) */ + ELS_GAID = 0x30, /* get alias_ID */ + ELS_FACT = 0x31, /* fabric activate alias_id */ + ELS_FDACDT = 0x32, /* fabric deactivate alias_id */ + ELS_NACT = 0x33, /* N-port activate alias_id */ + ELS_NDACT = 0x34, /* N-port deactivate alias_id */ + ELS_QOSR = 0x40, /* quality of service request */ + ELS_RVCS = 0x41, /* read virtual circuit status */ + ELS_PDISC = 0x50, /* discover N_port service params */ + ELS_FDISC = 0x51, /* discover F_port service params */ + ELS_ADISC = 0x52, /* discover address */ + ELS_RNC = 0x53, /* report node cap (obs) */ + ELS_FARP_REQ = 0x54, /* FC ARP request */ + ELS_FARP_REPL = 0x55, /* FC ARP reply */ + ELS_RPS = 0x56, /* read port status block */ + ELS_RPL = 0x57, /* read port list */ + ELS_RPBC = 0x58, /* read port buffer condition */ + ELS_FAN = 0x60, /* fabric address notification */ + ELS_RSCN = 0x61, /* registered state change notification */ + ELS_SCR = 0x62, /* state change registration */ + ELS_RNFT = 0x63, /* report node FC-4 types */ + ELS_CSR = 0x68, /* clock synch. request */ + ELS_CSU = 0x69, /* clock synch. update */ + ELS_LINIT = 0x70, /* loop initialize */ + ELS_LSTS = 0x72, /* loop status */ + ELS_RNID = 0x78, /* request node ID data */ + ELS_RLIR = 0x79, /* registered link incident report */ + ELS_LIRR = 0x7a, /* link incident record registration */ + ELS_SRL = 0x7b, /* scan remote loop */ + ELS_SBRP = 0x7c, /* set bit-error reporting params */ + ELS_RPSC = 0x7d, /* report speed capabilities */ + ELS_QSA = 0x7e, /* query security attributes */ + ELS_EVFP = 0x7f, /* exchange virt. fabrics params */ + ELS_LKA = 0x80, /* link keep-alive */ + ELS_AUTH_ELS = 0x90, /* authentication ELS */ +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_ELS_CMDS_INIT { \ + [ELS_LS_RJT] = "LS_RJT", \ + [ELS_LS_ACC] = "LS_ACC", \ + [ELS_PLOGI] = "PLOGI", \ + [ELS_FLOGI] = "FLOGI", \ + [ELS_LOGO] = "LOGO", \ + [ELS_ABTX] = "ABTX", \ + [ELS_RCS] = "RCS", \ + [ELS_RES] = "RES", \ + [ELS_RSS] = "RSS", \ + [ELS_RSI] = "RSI", \ + [ELS_ESTS] = "ESTS", \ + [ELS_ESTC] = "ESTC", \ + [ELS_ADVC] = "ADVC", \ + [ELS_RTV] = "RTV", \ + [ELS_RLS] = "RLS", \ + [ELS_ECHO] = "ECHO", \ + [ELS_TEST] = "TEST", \ + [ELS_RRQ] = "RRQ", \ + [ELS_REC] = "REC", \ + [ELS_SRR] = "SRR", \ + [ELS_PRLI] = "PRLI", \ + [ELS_PRLO] = "PRLO", \ + [ELS_SCN] = "SCN", \ + [ELS_TPLS] = "TPLS", \ + [ELS_TPRLO] = "TPRLO", \ + [ELS_LCLM] = "LCLM", \ + [ELS_GAID] = "GAID", \ + [ELS_FACT] = "FACT", \ + [ELS_FDACDT] = "FDACDT", \ + [ELS_NACT] = "NACT", \ + [ELS_NDACT] = "NDACT", \ + [ELS_QOSR] = "QOSR", \ + [ELS_RVCS] = "RVCS", \ + [ELS_PDISC] = "PDISC", \ + [ELS_FDISC] = "FDISC", \ + [ELS_ADISC] = "ADISC", \ + [ELS_RNC] = "RNC", \ + [ELS_FARP_REQ] = "FARP_REQ", \ + [ELS_FARP_REPL] = "FARP_REPL", \ + [ELS_RPS] = "RPS", \ + [ELS_RPL] = "RPL", \ + [ELS_RPBC] = "RPBC", \ + [ELS_FAN] = "FAN", \ + [ELS_RSCN] = "RSCN", \ + [ELS_SCR] = "SCR", \ + [ELS_RNFT] = "RNFT", \ + [ELS_CSR] = "CSR", \ + [ELS_CSU] = "CSU", \ + [ELS_LINIT] = "LINIT", \ + [ELS_LSTS] = "LSTS", \ + [ELS_RNID] = "RNID", \ + [ELS_RLIR] = "RLIR", \ + [ELS_LIRR] = "LIRR", \ + [ELS_SRL] = "SRL", \ + [ELS_SBRP] = "SBRP", \ + [ELS_RPSC] = "RPSC", \ + [ELS_QSA] = "QSA", \ + [ELS_EVFP] = "EVFP", \ + [ELS_LKA] = "LKA", \ + [ELS_AUTH_ELS] = "AUTH_ELS", \ +} + +/* + * LS_ACC payload. + */ +struct fc_els_ls_acc { + __u8 la_cmd; /* command code ELS_LS_ACC */ + __u8 la_resv[3]; /* reserved */ +}; + +/* + * ELS reject payload. + */ +struct fc_els_ls_rjt { + __u8 er_cmd; /* command code ELS_LS_RJT */ + __u8 er_resv[4]; /* reserved must be zero */ + __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */ + __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */ + __u8 er_vendor; /* vendor specific code */ +}; + +/* + * ELS reject reason codes (er_reason). + */ +enum fc_els_rjt_reason { + ELS_RJT_NONE = 0, /* no reject - not to be sent */ + ELS_RJT_INVAL = 0x01, /* invalid ELS command code */ + ELS_RJT_LOGIC = 0x03, /* logical error */ + ELS_RJT_BUSY = 0x05, /* logical busy */ + ELS_RJT_PROT = 0x07, /* protocol error */ + ELS_RJT_UNAB = 0x09, /* unable to perform command request */ + ELS_RJT_UNSUP = 0x0b, /* command not supported */ + ELS_RJT_INPROG = 0x0e, /* command already in progress */ + ELS_RJT_VENDOR = 0xff, /* vendor specific error */ +}; + + +/* + * reason code explanation (er_explan). + */ +enum fc_els_rjt_explan { + ELS_EXPL_NONE = 0x00, /* No additional explanation */ + ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */ + ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */ + ELS_EXPL_AH = 0x11, /* invalid association header */ + ELS_EXPL_AH_REQ = 0x13, /* association_header required */ + ELS_EXPL_SID = 0x15, /* invalid originator S_ID */ + ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */ + ELS_EXPL_INPROG = 0x19, /* Request already in progress */ + ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */ + ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */ + ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */ + ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */ + ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */ + /* TBD - above definitions incomplete */ +}; + +/* + * Common service parameters (N ports). + */ +struct fc_els_csp { + __u8 sp_hi_ver; /* highest version supported (obs.) */ + __u8 sp_lo_ver; /* highest version supported (obs.) */ + __be16 sp_bb_cred; /* buffer-to-buffer credits */ + __be16 sp_features; /* common feature flags */ + __be16 sp_bb_data; /* b-b state number and data field sz */ + union { + struct { + __be16 _sp_tot_seq; /* total concurrent sequences */ + __be16 _sp_rel_off; /* rel. offset by info cat */ + } sp_plogi; + struct { + __be32 _sp_r_a_tov; /* resource alloc. timeout msec */ + } sp_flogi_acc; + } sp_u; + __be32 sp_e_d_tov; /* error detect timeout value */ +}; +#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq +#define sp_rel_off sp_u.sp_plogi._sp_rel_off +#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov + +#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */ + +/* + * Minimum and maximum values for max data field size in service parameters. + */ +#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD +#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD + +/* + * sp_features + */ +#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel. off. */ +#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */ +#define FC_SP_FT_RAND 0x4000 /* random relative offset */ +#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */ +#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */ +#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */ +#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */ +#define FC_SP_FT_MCAST 0x0200 /* multicast */ +#define FC_SP_FT_BCAST 0x0100 /* broadcast */ +#define FC_SP_FT_HUNT 0x0080 /* hunt group */ +#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */ +#define FC_SP_FT_SEC 0x0020 /* reserved for security */ +#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */ +#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */ +#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */ +#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */ +#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */ + +/* + * Class-specific service parameters. + */ +struct fc_els_cssp { + __be16 cp_class; /* class flags */ + __be16 cp_init; /* initiator flags */ + __be16 cp_recip; /* recipient flags */ + __be16 cp_rdfs; /* receive data field size */ + __be16 cp_con_seq; /* concurrent sequences */ + __be16 cp_ee_cred; /* N-port end-to-end credit */ + __u8 cp_resv1; /* reserved */ + __u8 cp_open_seq; /* open sequences per exchange */ + __u8 _cp_resv2[2]; /* reserved */ +}; + +/* + * cp_class flags. + */ +#define FC_CPC_VALID 0x8000 /* class valid */ +#define FC_CPC_IMIX 0x4000 /* intermix mode */ +#define FC_CPC_SEQ 0x0800 /* sequential delivery */ +#define FC_CPC_CAMP 0x0200 /* camp-on */ +#define FC_CPC_PRI 0x0080 /* priority */ + +/* + * cp_init flags. + * (TBD: not all flags defined here). + */ +#define FC_CPI_CSYN 0x0010 /* clock synch. capable */ + +/* + * cp_recip flags. + */ +#define FC_CPR_CSYN 0x0008 /* clock synch. capable */ + +/* + * NFC_ELS_FLOGI: Fabric login request. + * NFC_ELS_PLOGI: Port login request (same format). + */ +struct fc_els_flogi { + __u8 fl_cmd; /* command */ + __u8 _fl_resvd[3]; /* must be zero */ + struct fc_els_csp fl_csp; /* common service parameters */ + __be64 fl_wwpn; /* port name */ + __be64 fl_wwnn; /* node name */ + struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */ + __u8 fl_vend[16]; /* vendor version level */ +} __attribute__((__packed__)); + +/* + * Process login service parameter page. + */ +struct fc_els_spp { + __u8 spp_type; /* type code or common service params */ + __u8 spp_type_ext; /* type code extension */ + __u8 spp_flags; + __u8 _spp_resvd; + __be32 spp_orig_pa; /* originator process associator */ + __be32 spp_resp_pa; /* responder process associator */ + __be32 spp_params; /* service parameters */ +}; + +/* + * spp_flags. + */ +#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */ +#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */ +#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */ +#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */ + +/* + * SPP response code in spp_flags - lower 4 bits. + */ +enum fc_els_spp_resp { + FC_SPP_RESP_ACK = 1, /* request executed */ + FC_SPP_RESP_RES = 2, /* unable due to lack of resources */ + FC_SPP_RESP_INIT = 3, /* initialization not complete */ + FC_SPP_RESP_NO_PA = 4, /* unknown process associator */ + FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */ + FC_SPP_RESP_COND = 6, /* request completed conditionally */ + FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */ + FC_SPP_RESP_INVL = 8, /* SPP is invalid */ +}; + +/* + * ELS_RRQ - Reinstate Recovery Qualifier + */ +struct fc_els_rrq { + __u8 rrq_cmd; /* command (0x12) */ + __u8 rrq_zero[3]; /* specified as zero - part of cmd */ + __u8 rrq_resvd; /* reserved */ + __u8 rrq_s_id[3]; /* originator FID */ + __be16 rrq_ox_id; /* originator exchange ID */ + __be16 rrq_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC - Read exchange concise. + */ +struct fc_els_rec { + __u8 rec_cmd; /* command (0x13) */ + __u8 rec_zero[3]; /* specified as zero - part of cmd */ + __u8 rec_resvd; /* reserved */ + __u8 rec_s_id[3]; /* originator FID */ + __be16 rec_ox_id; /* originator exchange ID */ + __be16 rec_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC LS_ACC payload. + */ +struct fc_els_rec_acc { + __u8 reca_cmd; /* accept (0x02) */ + __u8 reca_zero[3]; /* specified as zero - part of cmd */ + __be16 reca_ox_id; /* originator exchange ID */ + __be16 reca_rx_id; /* responders exchange ID */ + __u8 reca_resvd1; /* reserved */ + __u8 reca_ofid[3]; /* originator FID */ + __u8 reca_resvd2; /* reserved */ + __u8 reca_rfid[3]; /* responder FID */ + __be32 reca_fc4value; /* FC4 value */ + __be32 reca_e_stat; /* ESB (exchange status block) status */ +}; + +/* + * ELS_PRLI - Process login request and response. + */ +struct fc_els_prli { + __u8 prli_cmd; /* command */ + __u8 prli_spp_len; /* length of each serv. parm. page */ + __be16 prli_len; /* length of entire payload */ + /* service parameter pages follow */ +}; + +/* + * ELS_ADISC payload + */ +struct fc_els_adisc { + __u8 adisc_cmd; + __u8 adisc_resv[3]; + __u8 adisc_resv1; + __u8 adisc_hard_addr[3]; + __be64 adisc_wwpn; + __be64 adisc_wwnn; + __u8 adisc_resv2; + __u8 adisc_port_id[3]; +} __attribute__((__packed__)); + +/* + * ELS_LOGO - process or fabric logout. + */ +struct fc_els_logo { + __u8 fl_cmd; /* command code */ + __u8 fl_zero[3]; /* specified as zero - part of cmd */ + __u8 fl_resvd; /* reserved */ + __u8 fl_n_port_id[3];/* N port ID */ + __be64 fl_n_port_wwn; /* port name */ +}; + +/* + * ELS_RTV - read timeout value. + */ +struct fc_els_rtv { + __u8 rtv_cmd; /* command code 0x0e */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ +}; + +/* + * LS_ACC for ELS_RTV - read timeout value. + */ +struct fc_els_rtv_acc { + __u8 rtv_cmd; /* command code 0x02 */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ + __be32 rtv_r_a_tov; /* resource allocation timeout value */ + __be32 rtv_e_d_tov; /* error detection timeout value */ + __be32 rtv_toq; /* timeout qualifier (see below) */ +}; + +/* + * rtv_toq bits. + */ +#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */ +#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */ + +/* + * ELS_SCR - state change registration payload. + */ +struct fc_els_scr { + __u8 scr_cmd; /* command code */ + __u8 scr_resv[6]; /* reserved */ + __u8 scr_reg_func; /* registration function (see below) */ +}; + +enum fc_els_scr_func { + ELS_SCRF_FAB = 1, /* fabric-detected registration */ + ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */ + ELS_SCRF_FULL = 3, /* full registration */ + ELS_SCRF_CLEAR = 255, /* remove any current registrations */ +}; + +/* + * ELS_RSCN - registered state change notification payload. + */ +struct fc_els_rscn { + __u8 rscn_cmd; /* RSCN opcode (0x61) */ + __u8 rscn_page_len; /* page length (4) */ + __be16 rscn_plen; /* payload length including this word */ + + /* followed by 4-byte generic affected Port_ID pages */ +}; + +struct fc_els_rscn_page { + __u8 rscn_page_flags; /* event and address format */ + __u8 rscn_fid[3]; /* fabric ID */ +}; + +#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */ +#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */ +#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */ +#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */ + +enum fc_els_rscn_ev_qual { + ELS_EV_QUAL_NONE = 0, /* unspecified */ + ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */ + ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */ + ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */ + ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */ + ELS_EV_QUAL_REM_OBJ = 5, /* removed object */ +}; + +enum fc_els_rscn_addr_fmt { + ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */ + ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */ + ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */ + ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */ +}; + +/* + * ELS_RNID - request Node ID. + */ +struct fc_els_rnid { + __u8 rnid_cmd; /* RNID opcode (0x78) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_resv2[3]; /* reserved */ +}; + +/* + * Node Identification Data formats (rnid_fmt) + */ +enum fc_els_rnid_fmt { + ELS_RNIDF_NONE = 0, /* no specific identification data */ + ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */ +}; + +/* + * ELS_RNID response. + */ +struct fc_els_rnid_resp { + __u8 rnid_cmd; /* response code (LS_ACC) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_cid_len; /* common ID data length */ + __u8 rnid_resv2; /* reserved */ + __u8 rnid_sid_len; /* specific ID data length */ +}; + +struct fc_els_rnid_cid { + __be64 rnid_wwpn; /* N port name */ + __be64 rnid_wwnn; /* node name */ +}; + +struct fc_els_rnid_gen { + __u8 rnid_vend_id[16]; /* vendor-unique ID */ + __be32 rnid_atype; /* associated type (see below) */ + __be32 rnid_phys_port; /* physical port number */ + __be32 rnid_att_nodes; /* number of attached nodes */ + __u8 rnid_node_mgmt; /* node management (see below) */ + __u8 rnid_ip_ver; /* IP version (see below) */ + __be16 rnid_prot_port; /* UDP / TCP port number */ + __be32 rnid_ip_addr[4]; /* IP address */ + __u8 rnid_resvd[2]; /* reserved */ + __be16 rnid_vend_spec; /* vendor-specific field */ +}; + +enum fc_els_rnid_atype { + ELS_RNIDA_UNK = 0x01, /* unknown */ + ELS_RNIDA_OTHER = 0x02, /* none of the following */ + ELS_RNIDA_HUB = 0x03, + ELS_RNIDA_SWITCH = 0x04, + ELS_RNIDA_GATEWAY = 0x05, + ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */ + ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */ + ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */ + ELS_RNIDA_STORAGE = 0x09, + ELS_RNIDA_HOST = 0x0a, + ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */ + ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */ + ELS_RNIDA_NAS = 0x11, /* NAS server */ + ELS_RNIDA_BRIDGE = 0x12, /* bridge */ + ELS_RNIDA_VIRT = 0x13, /* virtualization device */ + ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */ + ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */ + ELS_RNIDA_MF_SW = 1UL << 30, /* switch */ + ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */ + ELS_RNIDA_MF_ST = 1UL << 28, /* storage */ + ELS_RNIDA_MF_HOST = 1UL << 27, /* host */ + ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */ + ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */ + ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */ + ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */ + ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */ + ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */ +}; + +enum fc_els_rnid_mgmt { + ELS_RNIDM_SNMP = 0, + ELS_RNIDM_TELNET = 1, + ELS_RNIDM_HTTP = 2, + ELS_RNIDM_HTTPS = 3, + ELS_RNIDM_XML = 4, /* HTTP + XML */ +}; + +enum fc_els_rnid_ipver { + ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */ + ELS_RNIDIP_V4 = 1, /* IPv4 */ + ELS_RNIDIP_V6 = 2, /* IPv6 */ +}; + +/* + * ELS RPL - Read Port List. + */ +struct fc_els_rpl { + __u8 rpl_cmd; /* command */ + __u8 rpl_resv[5]; /* reserved - must be zero */ + __be16 rpl_max_size; /* maximum response size or zero */ + __u8 rpl_resv1; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ +}; + +/* + * Port number block in RPL response. + */ +struct fc_els_pnb { + __be32 pnb_phys_pn; /* physical port number */ + __u8 pnb_resv; /* reserved */ + __u8 pnb_port_id[3]; /* port ID */ + __be64 pnb_wwpn; /* port name */ +}; + +/* + * RPL LS_ACC response. + */ +struct fc_els_rpl_resp { + __u8 rpl_cmd; /* ELS_LS_ACC */ + __u8 rpl_resv1; /* reserved - must be zero */ + __be16 rpl_plen; /* payload length */ + __u8 rpl_resv2; /* reserved - must be zero */ + __u8 rpl_llen[3]; /* list length */ + __u8 rpl_resv3; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ + struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */ +}; + +/* + * Link Error Status Block. + */ +struct fc_els_lesb { + __be32 lesb_link_fail; /* link failure count */ + __be32 lesb_sync_loss; /* loss of synchronization count */ + __be32 lesb_sig_loss; /* loss of signal count */ + __be32 lesb_prim_err; /* primitive sequence error count */ + __be32 lesb_inv_word; /* invalid transmission word count */ + __be32 lesb_inv_crc; /* invalid CRC count */ +}; + +/* + * ELS RPS - Read Port Status Block request. + */ +struct fc_els_rps { + __u8 rps_cmd; /* command */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __be64 rps_port_spec; /* port selection */ +}; + +enum fc_els_rps_flag { + FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */ + FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */ + FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */ +}; + +/* + * ELS RPS LS_ACC response. + */ +struct fc_els_rps_resp { + __u8 rps_cmd; /* command - LS_ACC */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __u8 rps_resv2[2]; /* reserved */ + __be16 rps_status; /* port status - see below */ + struct fc_els_lesb rps_lesb; /* link error status block */ +}; + +enum fc_els_rps_resp_flag { + FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */ +}; + +enum fc_els_rps_resp_status { + FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */ + FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */ + FC_ELS_RPS_FAB = 1 << 3, /* fabric present */ + FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */ + FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */ + FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */ +}; + +/* + * ELS LIRR - Link Incident Record Registration request. + */ +struct fc_els_lirr { + __u8 lirr_cmd; /* command */ + __u8 lirr_resv[3]; /* reserved - must be zero */ + __u8 lirr_func; /* registration function */ + __u8 lirr_fmt; /* FC-4 type of RLIR requested */ + __u8 lirr_resv2[2]; /* reserved - must be zero */ +}; + +enum fc_els_lirr_func { + ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */ + ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */ + ELS_LIRR_CLEAR = 0xff /* clear registration */ +}; + +/* + * ELS SRL - Scan Remote Loop request. + */ +struct fc_els_srl { + __u8 srl_cmd; /* command */ + __u8 srl_resv[3]; /* reserved - must be zero */ + __u8 srl_flag; /* flag - see below */ + __u8 srl_flag_param[3]; /* flag parameter */ +}; + +enum fc_els_srl_flag { + FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */ + FC_ELS_SRL_ONE = 0x01, /* scan specified loop */ + FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */ + FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */ +}; + +/* + * ELS RLS - Read Link Error Status Block request. + */ +struct fc_els_rls { + __u8 rls_cmd; /* command */ + __u8 rls_resv[4]; /* reserved - must be zero */ + __u8 rls_port_id[3]; /* port ID */ +}; + +/* + * ELS RLS LS_ACC Response. + */ +struct fc_els_rls_resp { + __u8 rls_cmd; /* ELS_LS_ACC */ + __u8 rls_resv[3]; /* reserved - must be zero */ + struct fc_els_lesb rls_lesb; /* link error status block */ +}; + +/* + * ELS RLIR - Registered Link Incident Report. + * This is followed by the CLIR and the CLID, described below. + */ +struct fc_els_rlir { + __u8 rlir_cmd; /* command */ + __u8 rlir_resv[3]; /* reserved - must be zero */ + __u8 rlir_fmt; /* format (FC4-type if type specific) */ + __u8 rlir_clr_len; /* common link incident record length */ + __u8 rlir_cld_len; /* common link incident desc. length */ + __u8 rlir_slr_len; /* spec. link incident record length */ +}; + +/* + * CLIR - Common Link Incident Record Data. - Sent via RLIR. + */ +struct fc_els_clir { + __be64 clir_wwpn; /* incident port name */ + __be64 clir_wwnn; /* incident port node name */ + __u8 clir_port_type; /* incident port type */ + __u8 clir_port_id[3]; /* incident port ID */ + + __be64 clir_conn_wwpn; /* connected port name */ + __be64 clir_conn_wwnn; /* connected node name */ + __be64 clir_fab_name; /* fabric name */ + __be32 clir_phys_port; /* physical port number */ + __be32 clir_trans_id; /* transaction ID */ + __u8 clir_resv[3]; /* reserved */ + __u8 clir_ts_fmt; /* time stamp format */ + __be64 clir_timestamp; /* time stamp */ +}; + +/* + * CLIR clir_ts_fmt - time stamp format values. + */ +enum fc_els_clir_ts_fmt { + ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */ + ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */ + ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */ +}; + +/* + * Common Link Incident Descriptor - sent via RLIR. + */ +struct fc_els_clid { + __u8 clid_iq; /* incident qualifier flags */ + __u8 clid_ic; /* incident code */ + __be16 clid_epai; /* domain/area of ISL */ +}; + +/* + * CLID incident qualifier flags. + */ +enum fc_els_clid_iq { + ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */ + ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */ + ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */ + ELS_CLID_SEV_INFO = 0x00, /* report is informational */ + ELS_CLID_SEV_INOP = 0x08, /* link not operational */ + ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */ + ELS_CLID_LASER = 0x02, /* subassembly is a laser */ + ELS_CLID_FRU = 0x01, /* format can identify a FRU */ +}; + +/* + * CLID incident code. + */ +enum fc_els_clid_ic { + ELS_CLID_IC_IMPL = 1, /* implicit incident */ + ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */ + ELS_CLID_IC_LOS = 3, /* loss of synch or signal */ + ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */ + ELS_CLID_IC_PST = 5, /* primitive sequence timeout */ + ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */ + ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */ + ELS_CLID_IC_LIP = 8, /* receiving LIP */ +}; + +#endif /* _FC_ELS_H_ */ diff --git a/include/scsi/fc/fc_encaps.h b/include/scsi/fc/fc_encaps.h new file mode 100644 index 00000000000..f180c3e1622 --- /dev/null +++ b/include/scsi/fc/fc_encaps.h @@ -0,0 +1,138 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ +#ifndef _FC_ENCAPS_H_ +#define _FC_ENCAPS_H_ + +/* + * Protocol definitions from RFC 3643 - Fibre Channel Frame Encapsulation. + * + * Note: The frame length field is the number of 32-bit words in + * the encapsulation including the fcip_encaps_header, CRC and EOF words. + * The minimum frame length value in bytes is (32 + 24 + 4 + 4) * 4 = 64. + * The maximum frame length value in bytes is (32 + 24 + 2112 + 4 + 4) = 2172. + */ +#define FC_ENCAPS_MIN_FRAME_LEN 64 /* min frame len (bytes) (see above) */ +#define FC_ENCAPS_MAX_FRAME_LEN (FC_ENCAPS_MIN_FRAME_LEN + FC_MAX_PAYLOAD) + +#define FC_ENCAPS_VER 1 /* current version number */ + +struct fc_encaps_hdr { + __u8 fc_proto; /* protocol number */ + __u8 fc_ver; /* version of encapsulation */ + __u8 fc_proto_n; /* ones complement of protocol */ + __u8 fc_ver_n; /* ones complement of version */ + + unsigned char fc_proto_data[8]; /* protocol specific data */ + + __be16 fc_len_flags; /* 10-bit length/4 w/ 6 flag bits */ + __be16 fc_len_flags_n; /* ones complement of length / flags */ + + /* + * Offset 0x10 + */ + __be32 fc_time[2]; /* time stamp: seconds and fraction */ + __be32 fc_crc; /* CRC */ + __be32 fc_sof; /* start of frame (see FC_SOF below) */ + + /* 0x20 - FC frame content followed by EOF word */ +}; + +#define FCIP_ENCAPS_HDR_LEN 0x20 /* expected length for asserts */ + +/* + * Macro's for making redundant copies of EOF and SOF. + */ +#define FC_XY(x, y) ((((x) & 0xff) << 8) | ((y) & 0xff)) +#define FC_XYXY(x, y) ((FCIP_XY(x, y) << 16) | FCIP_XY(x, y)) +#define FC_XYNN(x, y) (FCIP_XYXY(x, y) ^ 0xffff) + +#define FC_SOF_ENCODE(n) FC_XYNN(n, n) +#define FC_EOF_ENCODE(n) FC_XYNN(n, n) + +/* + * SOF / EOF bytes. + */ +enum fc_sof { + FC_SOF_F = 0x28, /* fabric */ + FC_SOF_I4 = 0x29, /* initiate class 4 */ + FC_SOF_I2 = 0x2d, /* initiate class 2 */ + FC_SOF_I3 = 0x2e, /* initiate class 3 */ + FC_SOF_N4 = 0x31, /* normal class 4 */ + FC_SOF_N2 = 0x35, /* normal class 2 */ + FC_SOF_N3 = 0x36, /* normal class 3 */ + FC_SOF_C4 = 0x39, /* activate class 4 */ +} __attribute__((packed)); + +enum fc_eof { + FC_EOF_N = 0x41, /* normal (not last frame of seq) */ + FC_EOF_T = 0x42, /* terminate (last frame of sequence) */ + FC_EOF_RT = 0x44, + FC_EOF_DT = 0x46, /* disconnect-terminate class-1 */ + FC_EOF_NI = 0x49, /* normal-invalid */ + FC_EOF_DTI = 0x4e, /* disconnect-terminate-invalid */ + FC_EOF_RTI = 0x4f, + FC_EOF_A = 0x50, /* abort */ +} __attribute__((packed)); + +#define FC_SOF_CLASS_MASK 0x06 /* mask for class of service in SOF */ + +/* + * Define classes in terms of the SOF code (initial). + */ +enum fc_class { + FC_CLASS_NONE = 0, /* software value indicating no class */ + FC_CLASS_2 = FC_SOF_I2, + FC_CLASS_3 = FC_SOF_I3, + FC_CLASS_4 = FC_SOF_I4, + FC_CLASS_F = FC_SOF_F, +}; + +/* + * Determine whether SOF code indicates the need for a BLS ACK. + */ +static inline int fc_sof_needs_ack(enum fc_sof sof) +{ + return (~sof) & 0x02; /* true for class 1, 2, 4, 6, or F */ +} + +/* + * Given an fc_class, return the normal (non-initial) SOF value. + */ +static inline enum fc_sof fc_sof_normal(enum fc_class class) +{ + return class + FC_SOF_N3 - FC_SOF_I3; /* diff is always 8 */ +} + +/* + * Compute class from SOF value. + */ +static inline enum fc_class fc_sof_class(enum fc_sof sof) +{ + return (sof & 0x7) | FC_SOF_F; +} + +/* + * Determine whether SOF is for the initial frame of a sequence. + */ +static inline int fc_sof_is_init(enum fc_sof sof) +{ + return sof < 0x30; +} + +#endif /* _FC_ENCAPS_H_ */ diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h new file mode 100644 index 00000000000..cff8a8c22f5 --- /dev/null +++ b/include/scsi/fc/fc_fc2.h @@ -0,0 +1,124 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FC2_H_ +#define _FC_FC2_H_ + +/* + * Fibre Channel Exchanges and Sequences. + */ +#ifndef PACKED +#define PACKED __attribute__ ((__packed__)) +#endif /* PACKED */ + + +/* + * Sequence Status Block. + * This format is set by the FC-FS standard and is sent over the wire. + * Note that the fields aren't all naturally aligned. + */ +struct fc_ssb { + __u8 ssb_seq_id; /* sequence ID */ + __u8 _ssb_resvd; + __be16 ssb_low_seq_cnt; /* lowest SEQ_CNT */ + + __be16 ssb_high_seq_cnt; /* highest SEQ_CNT */ + __be16 ssb_s_stat; /* sequence status flags */ + + __be16 ssb_err_seq_cnt; /* error SEQ_CNT */ + __u8 ssb_fh_cs_ctl; /* frame header CS_CTL */ + __be16 ssb_fh_ox_id; /* frame header OX_ID */ + __be16 ssb_rx_id; /* responder's exchange ID */ + __u8 _ssb_resvd2[2]; +} PACKED; + +/* + * The SSB should be 17 bytes. Since it's layout is somewhat strange, + * we define the size here so that code can ASSERT that the size comes out + * correct. + */ +#define FC_SSB_SIZE 17 /* length of fc_ssb for assert */ + +/* + * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90. + */ +#define SSB_ST_RESP (1 << 15) /* sequence responder */ +#define SSB_ST_ACTIVE (1 << 14) /* sequence is active */ +#define SSB_ST_ABNORMAL (1 << 12) /* abnormal ending condition */ + +#define SSB_ST_REQ_MASK (3 << 10) /* ACK, abort sequence condition */ +#define SSB_ST_REQ_CONT (0 << 10) +#define SSB_ST_REQ_ABORT (1 << 10) +#define SSB_ST_REQ_STOP (2 << 10) +#define SSB_ST_REQ_RETRANS (3 << 10) + +#define SSB_ST_ABTS (1 << 9) /* ABTS protocol completed */ +#define SSB_ST_RETRANS (1 << 8) /* retransmission completed */ +#define SSB_ST_TIMEOUT (1 << 7) /* sequence timed out by recipient */ +#define SSB_ST_P_RJT (1 << 6) /* P_RJT transmitted */ + +#define SSB_ST_CLASS_BIT 4 /* class of service field LSB */ +#define SSB_ST_CLASS_MASK 3 /* class of service mask */ +#define SSB_ST_ACK (1 << 3) /* ACK (EOFt or EOFdt) transmitted */ + +/* + * Exchange Status Block. + * This format is set by the FC-FS standard and is sent over the wire. + * Note that the fields aren't all naturally aligned. + */ +struct fc_esb { + __u8 esb_cs_ctl; /* CS_CTL for frame header */ + __be16 esb_ox_id; /* originator exchange ID */ + __be16 esb_rx_id; /* responder exchange ID */ + __be32 esb_orig_fid; /* fabric ID of originator */ + __be32 esb_resp_fid; /* fabric ID of responder */ + __be32 esb_e_stat; /* status */ + __u8 _esb_resvd[4]; + __u8 esb_service_params[112]; /* TBD */ + __u8 esb_seq_status[8]; /* sequence statuses, 8 bytes each */ +} __attribute__((packed));; + + +/* + * Define expected size for ASSERTs. + * See comments on FC_SSB_SIZE. + */ +#define FC_ESB_SIZE (1 + 5*4 + 112 + 8) /* expected size */ + +/* + * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90. + */ +#define ESB_ST_RESP (1 << 31) /* responder to exchange */ +#define ESB_ST_SEQ_INIT (1 << 30) /* port holds sequence initiaive */ +#define ESB_ST_COMPLETE (1 << 29) /* exchange is complete */ +#define ESB_ST_ABNORMAL (1 << 28) /* abnormal ending condition */ +#define ESB_ST_REC_QUAL (1 << 26) /* recovery qualifier active */ + +#define ESB_ST_ERRP_BIT 24 /* LSB for error policy */ +#define ESB_ST_ERRP_MASK (3 << 24) /* mask for error policy */ +#define ESB_ST_ERRP_MULT (0 << 24) /* abort, discard multiple sequences */ +#define ESB_ST_ERRP_SING (1 << 24) /* abort, discard single sequence */ +#define ESB_ST_ERRP_INF (2 << 24) /* process with infinite buffers */ +#define ESB_ST_ERRP_IMM (3 << 24) /* discard mult. with immed. retran. */ + +#define ESB_ST_OX_ID_INVL (1 << 23) /* originator XID invalid */ +#define ESB_ST_RX_ID_INVL (1 << 22) /* responder XID invalid */ +#define ESB_ST_PRI_INUSE (1 << 21) /* priority / preemption in use */ + +#endif /* _FC_FC2_H_ */ diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h new file mode 100644 index 00000000000..57aaa8f0d61 --- /dev/null +++ b/include/scsi/fc/fc_fcoe.h @@ -0,0 +1,114 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FCOE_H_ +#define _FC_FCOE_H_ + +/* + * FCoE - Fibre Channel over Ethernet. + */ + +/* + * The FCoE ethertype eventually goes in net/if_ether.h. + */ +#ifndef ETH_P_FCOE +#define ETH_P_FCOE 0x8906 /* FCOE ether type */ +#endif + +#ifndef ETH_P_8021Q +#define ETH_P_8021Q 0x8100 +#endif + +/* + * FC_FCOE_OUI hasn't been standardized yet. XXX TBD. + */ +#ifndef FC_FCOE_OUI +#define FC_FCOE_OUI 0x0efc00 /* upper 24 bits of FCOE dest MAC TBD */ +#endif + +/* + * The destination MAC address for the fabric login may get a different OUI. + * This isn't standardized yet. + */ +#ifndef FC_FCOE_FLOGI_MAC +/* gateway MAC - TBD */ +#define FC_FCOE_FLOGI_MAC { 0x0e, 0xfc, 0x00, 0xff, 0xff, 0xfe } +#endif + +#define FC_FCOE_VER 0 /* version */ + +/* + * Ethernet Addresses based on FC S_ID and D_ID. + * Generated by FC_FCOE_OUI | S_ID/D_ID + */ +#define FC_FCOE_ENCAPS_ID(n) (((u64) FC_FCOE_OUI << 24) | (n)) +#define FC_FCOE_DECAPS_ID(n) ((n) >> 24) + +/* + * FCoE frame header - 14 bytes + * + * This is the August 2007 version of the FCoE header as defined by T11. + * This follows the VLAN header, which includes the ethertype. + */ +struct fcoe_hdr { + __u8 fcoe_ver; /* version field - upper 4 bits */ + __u8 fcoe_resvd[12]; /* reserved - send zero and ignore */ + __u8 fcoe_sof; /* start of frame per RFC 3643 */ +}; + +#define FC_FCOE_DECAPS_VER(hp) ((hp)->fcoe_ver >> 4) +#define FC_FCOE_ENCAPS_VER(hp, ver) ((hp)->fcoe_ver = (ver) << 4) + +/* + * FCoE CRC & EOF - 8 bytes. + */ +struct fcoe_crc_eof { + __le32 fcoe_crc32; /* CRC for FC packet */ + __u8 fcoe_eof; /* EOF from RFC 3643 */ + __u8 fcoe_resvd[3]; /* reserved - send zero and ignore */ +} __attribute__((packed)); + +/* + * Minimum FCoE + FC header length + * 14 bytes FCoE header + 24 byte FC header = 38 bytes + */ +#define FCOE_HEADER_LEN 38 + +/* + * Minimum FCoE frame size + * 14 bytes FCoE header + 24 byte FC header + 8 byte FCoE trailer = 46 bytes + */ +#define FCOE_MIN_FRAME 46 + +/* + * fc_fcoe_set_mac - Store OUI + DID into MAC address field. + * @mac: mac address to be set + * @did: fc dest id to use + */ +static inline void fc_fcoe_set_mac(u8 *mac, u8 *did) +{ + mac[0] = (u8) (FC_FCOE_OUI >> 16); + mac[1] = (u8) (FC_FCOE_OUI >> 8); + mac[2] = (u8) FC_FCOE_OUI; + mac[3] = did[0]; + mac[4] = did[1]; + mac[5] = did[2]; +} + +#endif /* _FC_FCOE_H_ */ diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h new file mode 100644 index 00000000000..5d38f1989f3 --- /dev/null +++ b/include/scsi/fc/fc_fcp.h @@ -0,0 +1,199 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FCP_H_ +#define _FC_FCP_H_ + +/* + * Fibre Channel Protocol for SCSI. + * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005. + */ + +/* + * fc/fs.h defines FC_TYPE_FCP. + */ + +/* + * Service parameter page parameters (word 3 bits) for Process Login. + */ +#define FCP_SPPF_TASK_RETRY_ID 0x0200 /* task retry ID requested */ +#define FCP_SPPF_RETRY 0x0100 /* retry supported */ +#define FCP_SPPF_CONF_COMPL 0x0080 /* confirmed completion allowed */ +#define FCP_SPPF_OVLY_ALLOW 0x0040 /* data overlay allowed */ +#define FCP_SPPF_INIT_FCN 0x0020 /* initiator function */ +#define FCP_SPPF_TARG_FCN 0x0010 /* target function */ +#define FCP_SPPF_RD_XRDY_DIS 0x0002 /* disable XFER_RDY for reads */ +#define FCP_SPPF_WR_XRDY_DIS 0x0001 /* disable XFER_RDY for writes */ + +/* + * FCP_CMND IU Payload. + */ +struct fcp_cmnd { + __u8 fc_lun[8]; /* logical unit number */ + __u8 fc_cmdref; /* commmand reference number */ + __u8 fc_pri_ta; /* priority and task attribute */ + __u8 fc_tm_flags; /* task management flags */ + __u8 fc_flags; /* additional len & flags */ + __u8 fc_cdb[16]; /* base CDB */ + __be32 fc_dl; /* data length (must follow fc_cdb) */ +}; + +#define FCP_CMND_LEN 32 /* expected length of structure */ + +struct fcp_cmnd32 { + __u8 fc_lun[8]; /* logical unit number */ + __u8 fc_cmdref; /* commmand reference number */ + __u8 fc_pri_ta; /* priority and task attribute */ + __u8 fc_tm_flags; /* task management flags */ + __u8 fc_flags; /* additional len & flags */ + __u8 fc_cdb[32]; /* base CDB */ + __be32 fc_dl; /* data length (must follow fc_cdb) */ +}; + +#define FCP_CMND32_LEN 48 /* expected length of structure */ +#define FCP_CMND32_ADD_LEN (16 / 4) /* Additional cdb length */ + +/* + * fc_pri_ta. + */ +#define FCP_PTA_SIMPLE 0 /* simple task attribute */ +#define FCP_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCP_PTA_ORDERED 2 /* ordered task attribute */ +#define FCP_PTA_ACA 4 /* auto. contigent allegiance */ +#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */ +#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */ + +/* + * fc_tm_flags - task management flags field. + */ +#define FCP_TMF_CLR_ACA 0x40 /* clear ACA condition */ +#define FCP_TMF_LUN_RESET 0x10 /* logical unit reset task management */ +#define FCP_TMF_CLR_TASK_SET 0x04 /* clear task set */ +#define FCP_TMF_ABT_TASK_SET 0x02 /* abort task set */ + +/* + * fc_flags. + * Bits 7:2 are the additional FCP_CDB length / 4. + */ +#define FCP_CFL_LEN_MASK 0xfc /* mask for additional length */ +#define FCP_CFL_LEN_SHIFT 2 /* shift bits for additional length */ +#define FCP_CFL_RDDATA 0x02 /* read data */ +#define FCP_CFL_WRDATA 0x01 /* write data */ + +/* + * FCP_TXRDY IU - transfer ready payload. + */ +struct fcp_txrdy { + __be32 ft_data_ro; /* data relative offset */ + __be32 ft_burst_len; /* burst length */ + __u8 _ft_resvd[4]; /* reserved */ +}; + +#define FCP_TXRDY_LEN 12 /* expected length of structure */ + +/* + * FCP_RESP IU - response payload. + * + * The response payload comes in three parts: the flags/status, the + * sense/response lengths and the sense data/response info section. + * + * From FCP3r04, note 6 of section 9.5.13: + * + * Some early implementations presented the FCP_RSP IU without the FCP_RESID, + * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER, + * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This + * non-standard behavior should be tolerated. + * + * All response frames will always contain the fcp_resp template. Some + * will also include the fcp_resp_len template. + */ +struct fcp_resp { + __u8 _fr_resvd[8]; /* reserved */ + __be16 fr_retry_delay; /* retry delay timer */ + __u8 fr_flags; /* flags */ + __u8 fr_status; /* SCSI status code */ +}; + +#define FCP_RESP_LEN 12 /* expected length of structure */ + +struct fcp_resp_ext { + __be32 fr_resid; /* Residual value */ + __be32 fr_sns_len; /* SCSI Sense length */ + __be32 fr_rsp_len; /* Response Info length */ + + /* + * Optionally followed by RSP info and/or SNS info and/or + * bidirectional read residual length, if any. + */ +}; + +#define FCP_RESP_EXT_LEN 12 /* expected length of the structure */ + +struct fcp_resp_rsp_info { + __u8 _fr_resvd[3]; /* reserved */ + __u8 rsp_code; /* Response Info Code */ + __u8 _fr_resvd2[4]; /* reserved */ +}; + +struct fcp_resp_with_ext { + struct fcp_resp resp; + struct fcp_resp_ext ext; +}; + +#define FCP_RESP_WITH_EXT (FCP_RESP_LEN + FCP_RESP_EXT_LEN) + +/* + * fr_flags. + */ +#define FCP_BIDI_RSP 0x80 /* bidirectional read response */ +#define FCP_BIDI_READ_UNDER 0x40 /* bidir. read less than requested */ +#define FCP_BIDI_READ_OVER 0x20 /* DL insufficient for full transfer */ +#define FCP_CONF_REQ 0x10 /* confirmation requested */ +#define FCP_RESID_UNDER 0x08 /* transfer shorter than expected */ +#define FCP_RESID_OVER 0x04 /* DL insufficient for full transfer */ +#define FCP_SNS_LEN_VAL 0x02 /* SNS_LEN field is valid */ +#define FCP_RSP_LEN_VAL 0x01 /* RSP_LEN field is valid */ + +/* + * rsp_codes + */ +enum fcp_resp_rsp_codes { + FCP_TMF_CMPL = 0, + FCP_DATA_LEN_INVALID = 1, + FCP_CMND_FIELDS_INVALID = 2, + FCP_DATA_PARAM_MISMATCH = 3, + FCP_TMF_REJECTED = 4, + FCP_TMF_FAILED = 5, + FCP_TMF_INVALID_LUN = 9, +}; + +/* + * FCP SRR Link Service request - Sequence Retransmission Request. + */ +struct fcp_srr { + __u8 srr_op; /* opcode ELS_SRR */ + __u8 srr_resvd[3]; /* opcode / reserved - must be zero */ + __be16 srr_ox_id; /* OX_ID of failed command */ + __be16 srr_rx_id; /* RX_ID of failed command */ + __be32 srr_rel_off; /* relative offset */ + __u8 srr_r_ctl; /* r_ctl for the information unit */ + __u8 srr_resvd2[3]; /* reserved */ +}; + +#endif /* _FC_FCP_H_ */ diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h new file mode 100644 index 00000000000..3e4801d2bdb --- /dev/null +++ b/include/scsi/fc/fc_fs.h @@ -0,0 +1,340 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FS_H_ +#define _FC_FS_H_ + +/* + * Fibre Channel Framing and Signalling definitions. + * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. + */ + +/* + * Frame header + */ +struct fc_frame_header { + __u8 fh_r_ctl; /* routing control */ + __u8 fh_d_id[3]; /* Destination ID */ + + __u8 fh_cs_ctl; /* class of service control / pri */ + __u8 fh_s_id[3]; /* Source ID */ + + __u8 fh_type; /* see enum fc_fh_type below */ + __u8 fh_f_ctl[3]; /* frame control */ + + __u8 fh_seq_id; /* sequence ID */ + __u8 fh_df_ctl; /* data field control */ + __be16 fh_seq_cnt; /* sequence count */ + + __be16 fh_ox_id; /* originator exchange ID */ + __be16 fh_rx_id; /* responder exchange ID */ + __be32 fh_parm_offset; /* parameter or relative offset */ +}; + +#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ + +#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ +#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ + +#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) +#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) + +/* + * fh_r_ctl - Routing control definitions. + */ + /* + * FC-4 device_data. + */ +enum fc_rctl { + FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ + FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ + FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ + FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ + FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ + FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ + FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ + FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ + +#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ +#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ + + /* + * Extended Link_Data + */ + FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ + FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ + FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ + FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ + /* + * Optional Extended Headers + */ + FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ + FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ + FC_RCTL_ENCH = 0x52, /* encapsulation header */ + /* + * Basic Link Services fh_r_ctl values. + */ + FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ + FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ + FC_RCTL_BA_RMC = 0x82, /* remove connection */ + FC_RCTL_BA_ACC = 0x84, /* basic accept */ + FC_RCTL_BA_RJT = 0x85, /* basic reject */ + FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ + /* + * Link Control Information. + */ + FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ + FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ + FC_RCTL_P_RJT = 0xc2, /* port reject */ + FC_RCTL_F_RJT = 0xc3, /* fabric reject */ + FC_RCTL_P_BSY = 0xc4, /* port busy */ + FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ + FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ + FC_RCTL_LCR = 0xc7, /* link credit reset */ + FC_RCTL_END = 0xc9, /* end */ +}; + /* incomplete list of definitions */ + +/* + * R_CTL names initializer. + * Please keep this matching the above definitions. + */ +#define FC_RCTL_NAMES_INIT { \ + [FC_RCTL_DD_UNCAT] = "uncat", \ + [FC_RCTL_DD_SOL_DATA] = "sol data", \ + [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ + [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ + [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ + [FC_RCTL_DD_DATA_DESC] = "data desc", \ + [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ + [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ + [FC_RCTL_ELS_REQ] = "ELS req", \ + [FC_RCTL_ELS_REP] = "ELS rep", \ + [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ + [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ + [FC_RCTL_BA_NOP] = "BLS NOP", \ + [FC_RCTL_BA_ABTS] = "BLS abort", \ + [FC_RCTL_BA_RMC] = "BLS remove connection", \ + [FC_RCTL_BA_ACC] = "BLS accept", \ + [FC_RCTL_BA_RJT] = "BLS reject", \ + [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ + [FC_RCTL_ACK_1] = "LC ACK_1", \ + [FC_RCTL_ACK_0] = "LC ACK_0", \ + [FC_RCTL_P_RJT] = "LC port reject", \ + [FC_RCTL_F_RJT] = "LC fabric reject", \ + [FC_RCTL_P_BSY] = "LC port busy", \ + [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ + [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ + [FC_RCTL_LCR] = "LC link credit reset", \ + [FC_RCTL_END] = "LC end", \ +} + +/* + * Well-known fabric addresses. + */ +enum fc_well_known_fid { + FC_FID_BCAST = 0xffffff, /* broadcast */ + FC_FID_FLOGI = 0xfffffe, /* fabric login */ + FC_FID_FCTRL = 0xfffffd, /* fabric controller */ + FC_FID_DIR_SERV = 0xfffffc, /* directory server */ + FC_FID_TIME_SERV = 0xfffffb, /* time server */ + FC_FID_MGMT_SERV = 0xfffffa, /* management server */ + FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ + FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ + FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ + FC_FID_CLOCK = 0xfffff6, /* clock synch server */ + FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ +}; + +#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ +#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ + +/* + * Other well-known addresses, outside the above contiguous range. + */ +#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ + +/* + * Fabric ID bytes. + */ +#define FC_FID_DOMAIN 0 +#define FC_FID_PORT 1 +#define FC_FID_LINK 2 + +/* + * fh_type codes + */ +enum fc_fh_type { + FC_TYPE_BLS = 0x00, /* basic link service */ + FC_TYPE_ELS = 0x01, /* extended link service */ + FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ + FC_TYPE_FCP = 0x08, /* SCSI FCP */ + FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ + FC_TYPE_ILS = 0x22, /* internal link service */ +}; + +/* + * FC_TYPE names initializer. + * Please keep this matching the above definitions. + */ +#define FC_TYPE_NAMES_INIT { \ + [FC_TYPE_BLS] = "BLS", \ + [FC_TYPE_ELS] = "ELS", \ + [FC_TYPE_IP] = "IP", \ + [FC_TYPE_FCP] = "FCP", \ + [FC_TYPE_CT] = "CT", \ + [FC_TYPE_ILS] = "ILS", \ +} + +/* + * Exchange IDs. + */ +#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ +#define FC_XID_MIN 0x0 /* supported min exchange ID */ +#define FC_XID_MAX 0xfffe /* supported max exchange ID */ + +/* + * fh_f_ctl - Frame control flags. + */ +#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ +#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ +#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ +#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ +#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ +#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ +#define FC_FC_RES_B17 (1 << 17) /* reserved */ +#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ +#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ +#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ + +#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ +#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ +#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ + +#define FC_FC_RES_B11 (1 << 11) /* reserved */ +#define FC_FC_RES_B10 (1 << 10) /* reserved */ +#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ +#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ +#define FC_FC_CONT_SEQ(i) ((i) << 6) +#define FC_FC_ABT_SEQ(i) ((i) << 4) +#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ +#define FC_FC_RES2 (1 << 2) /* reserved */ +#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ + +/* + * BA_ACC payload. + */ +struct fc_ba_acc { + __u8 ba_seq_id_val; /* SEQ_ID validity */ +#define FC_BA_SEQ_ID_VAL 0x80 + __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ + __u8 ba_resvd[2]; /* reserved */ + __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ + __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ + __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ + __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ +}; + +/* + * BA_RJT: Basic Reject payload. + */ +struct fc_ba_rjt { + __u8 br_resvd; /* reserved */ + __u8 br_reason; /* reason code */ + __u8 br_explan; /* reason explanation */ + __u8 br_vendor; /* vendor unique code */ +}; + +/* + * BA_RJT reason codes. + * From FS-2. + */ +enum fc_ba_rjt_reason { + FC_BA_RJT_NONE = 0, /* in software this means no reject */ + FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ + FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ + FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ + FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ + FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ + FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ +}; + +/* + * BA_RJT reason code explanations. + */ +enum fc_ba_rjt_explan { + FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ + FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ + FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ +}; + +/* + * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. + */ +struct fc_pf_rjt { + __u8 rj_action; /* reserved */ + __u8 rj_reason; /* reason code */ + __u8 rj_resvd; /* reserved */ + __u8 rj_vendor; /* vendor unique code */ +}; + +/* + * P_RJT and F_RJT reject reason codes. + */ +enum fc_pf_rjt_reason { + FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ + FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ + FC_RJT_INVL_SID = 0x02, /* invalid source ID */ + FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ + FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ + FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ + FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ + FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ + FC_RJT_LINK_CTL = 0x08, /* invalid link control */ + FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ + FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ + FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ + FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ + FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ + FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ + FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ + FC_RJT_PARAM = 0x10, /* invalid parameter field */ + FC_RJT_EXCH_ERR = 0x11, /* exchange error */ + FC_RJT_PROTO = 0x12, /* protocol error */ + FC_RJT_LEN = 0x13, /* incorrect length */ + FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ + FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ + FC_RJT_LOGI_REQ = 0x16, /* login required */ + FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ + FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ + FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ + FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ + FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ + FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ + FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ + FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ + FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ + FC_RJT_MCAST_ERR = 0x22, /* multicast error */ + FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ + FC_RJT_PRLI_REQ = 0x24, /* process login required */ + FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ + FC_RJT_VENDOR = 0xff, /* vendor specific reject */ +}; + +#endif /* _FC_FS_H_ */ diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h new file mode 100644 index 00000000000..ffab0272c65 --- /dev/null +++ b/include/scsi/fc/fc_gs.h @@ -0,0 +1,93 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_GS_H_ +#define _FC_GS_H_ + +/* + * Fibre Channel Services - Common Transport. + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +struct fc_ct_hdr { + __u8 ct_rev; /* revision */ + __u8 ct_in_id[3]; /* N_Port ID of original requestor */ + __u8 ct_fs_type; /* type of fibre channel service */ + __u8 ct_fs_subtype; /* subtype */ + __u8 ct_options; + __u8 _ct_resvd1; + __be16 ct_cmd; /* command / response code */ + __be16 ct_mr_size; /* maximum / residual size */ + __u8 _ct_resvd2; + __u8 ct_reason; /* reject reason */ + __u8 ct_explan; /* reason code explanation */ + __u8 ct_vendor; /* vendor unique data */ +}; + +#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */ + +enum fc_ct_rev { + FC_CT_REV = 1 /* common transport revision */ +}; + +/* + * ct_fs_type values. + */ +enum fc_ct_fs_type { + FC_FST_ALIAS = 0xf8, /* alias service */ + FC_FST_MGMT = 0xfa, /* management service */ + FC_FST_TIME = 0xfb, /* time service */ + FC_FST_DIR = 0xfc, /* directory service */ +}; + +/* + * ct_cmd: Command / response codes + */ +enum fc_ct_cmd { + FC_FS_RJT = 0x8001, /* reject */ + FC_FS_ACC = 0x8002, /* accept */ +}; + +/* + * FS_RJT reason codes. + */ +enum fc_ct_reason { + FC_FS_RJT_CMD = 0x01, /* invalid command code */ + FC_FS_RJT_VER = 0x02, /* invalid version level */ + FC_FS_RJT_LOG = 0x03, /* logical error */ + FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */ + FC_FS_RJT_BSY = 0x05, /* logical busy */ + FC_FS_RJT_PROTO = 0x07, /* protocol error */ + FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */ + FC_FS_RJT_UNSUP = 0x0b, /* command not supported */ +}; + +/* + * FS_RJT reason code explanations. + */ +enum fc_ct_explan { + FC_FS_EXP_NONE = 0x00, /* no additional explanation */ + FC_FS_EXP_PID = 0x01, /* port ID not registered */ + FC_FS_EXP_PNAM = 0x02, /* port name not registered */ + FC_FS_EXP_NNAM = 0x03, /* node name not registered */ + FC_FS_EXP_COS = 0x04, /* class of service not registered */ + /* definitions not complete */ +}; + +#endif /* _FC_GS_H_ */ diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h new file mode 100644 index 00000000000..790d7b97d4b --- /dev/null +++ b/include/scsi/fc/fc_ns.h @@ -0,0 +1,159 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_NS_H_ +#define _FC_NS_H_ + +/* + * Fibre Channel Services - Name Service (dNS) + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +/* + * Common-transport sub-type for Name Server. + */ +#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */ + +/* + * Name server Requests. + * Note: this is an incomplete list, some unused requests are omitted. + */ +enum fc_ns_req { + FC_NS_GA_NXT = 0x0100, /* get all next */ + FC_NS_GI_A = 0x0101, /* get identifiers - scope */ + FC_NS_GPN_ID = 0x0112, /* get port name by ID */ + FC_NS_GNN_ID = 0x0113, /* get node name by ID */ + FC_NS_GID_PN = 0x0121, /* get ID for port name */ + FC_NS_GID_NN = 0x0131, /* get IDs for node name */ + FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */ + FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */ + FC_NS_GID_PT = 0x01a1, /* get IDs by port type */ + FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */ + FC_NS_RPN_ID = 0x0212, /* reg port name for ID */ + FC_NS_RNN_ID = 0x0213, /* reg node name for ID */ +}; + +/* + * Port type values. + */ +enum fc_ns_pt { + FC_NS_UNID_PORT = 0x00, /* unidentified */ + FC_NS_N_PORT = 0x01, /* N port */ + FC_NS_NL_PORT = 0x02, /* NL port */ + FC_NS_FNL_PORT = 0x03, /* F/NL port */ + FC_NS_NX_PORT = 0x7f, /* Nx port */ + FC_NS_F_PORT = 0x81, /* F port */ + FC_NS_FL_PORT = 0x82, /* FL port */ + FC_NS_E_PORT = 0x84, /* E port */ + FC_NS_B_PORT = 0x85, /* B port */ +}; + +/* + * Port type object. + */ +struct fc_ns_pt_obj { + __u8 pt_type; +}; + +/* + * Port ID object + */ +struct fc_ns_fid { + __u8 fp_flags; /* flags for responses only */ + __u8 fp_fid[3]; +}; + +/* + * fp_flags in port ID object, for responses only. + */ +#define FC_NS_FID_LAST 0x80 /* last object */ + +/* + * FC4-types object. + */ +#define FC_NS_TYPES 256 /* number of possible FC-4 types */ +#define FC_NS_BPW 32 /* bits per word in bitmap */ + +struct fc_ns_fts { + __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */ +}; + +/* + * GID_PT request. + */ +struct fc_ns_gid_pt { + __u8 fn_pt_type; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_resvd; +}; + +/* + * GID_FT or GPN_FT request. + */ +struct fc_ns_gid_ft { + __u8 fn_resvd; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_fc4_type; +}; + +/* + * GPN_FT response. + */ +struct fc_gpn_ft_resp { + __u8 fp_flags; /* see fp_flags definitions above */ + __u8 fp_fid[3]; /* port ID */ + __be32 fp_resvd; + __be64 fp_wwpn; /* port name */ +}; + +/* + * GID_PN request + */ +struct fc_ns_gid_pn { + __be64 fn_wwpn; /* port name */ +}; + +/* + * GID_PN response + */ +struct fc_gid_pn_resp { + __u8 fp_resvd; + __u8 fp_fid[3]; /* port ID */ +}; + +/* + * RFT_ID request - register FC-4 types for ID. + */ +struct fc_ns_rft_id { + struct fc_ns_fid fr_fid; /* port ID object */ + struct fc_ns_fts fr_fts; /* FC-4 types object */ +}; + +/* + * RPN_ID request - register port name for ID. + * RNN_ID request - register node name for ID. + */ +struct fc_ns_rn_id { + struct fc_ns_fid fr_fid; /* port ID object */ + __be64 fr_wwn; /* node name or port name */ +} __attribute__((__packed__)); + +#endif /* _FC_NS_H_ */ diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h new file mode 100644 index 00000000000..6300f556bce --- /dev/null +++ b/include/scsi/fc_encode.h @@ -0,0 +1,309 @@ +/* + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_ENCODE_H_ +#define _FC_ENCODE_H_ +#include <asm/unaligned.h> + +struct fc_ns_rft { + struct fc_ns_fid fid; /* port ID object */ + struct fc_ns_fts fts; /* FC4-types object */ +}; + +struct fc_ct_req { + struct fc_ct_hdr hdr; + union { + struct fc_ns_gid_ft gid; + struct fc_ns_rn_id rn; + struct fc_ns_rft rft; + } payload; +}; + +/** + * fill FC header fields in specified fc_frame + */ +static inline void fc_fill_fc_hdr(struct fc_frame *fp, enum fc_rctl r_ctl, + u32 did, u32 sid, enum fc_fh_type type, + u32 f_ctl, u32 parm_offset) +{ + struct fc_frame_header *fh; + + fh = fc_frame_header_get(fp); + WARN_ON(r_ctl == 0); + fh->fh_r_ctl = r_ctl; + hton24(fh->fh_d_id, did); + hton24(fh->fh_s_id, sid); + fh->fh_type = type; + hton24(fh->fh_f_ctl, f_ctl); + fh->fh_cs_ctl = 0; + fh->fh_df_ctl = 0; + fh->fh_parm_offset = htonl(parm_offset); +} + +/** + * fc_ct_hdr_fill- fills ct header and reset ct payload + * returns pointer to ct request. + */ +static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, + unsigned int op, size_t req_size) +{ + struct fc_ct_req *ct; + size_t ct_plen; + + ct_plen = sizeof(struct fc_ct_hdr) + req_size; + ct = fc_frame_payload_get(fp, ct_plen); + memset(ct, 0, ct_plen); + ct->hdr.ct_rev = FC_CT_REV; + ct->hdr.ct_fs_type = FC_FST_DIR; + ct->hdr.ct_fs_subtype = FC_NS_SUBTYPE; + ct->hdr.ct_cmd = htons((u16) op); + return ct; +} + +/** + * fc_ct_fill - Fill in a name service request frame + */ +static inline int fc_ct_fill(struct fc_lport *lport, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, u32 *did, + enum fc_fh_type *fh_type) +{ + struct fc_ct_req *ct; + + switch (op) { + case FC_NS_GPN_FT: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft)); + ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; + break; + + case FC_NS_RFT_ID: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft)); + hton24(ct->payload.rft.fid.fp_fid, + fc_host_port_id(lport->host)); + ct->payload.rft.fts = lport->fcts; + break; + + case FC_NS_RPN_ID: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id)); + hton24(ct->payload.rn.fr_fid.fp_fid, + fc_host_port_id(lport->host)); + ct->payload.rft.fts = lport->fcts; + put_unaligned_be64(lport->wwpn, &ct->payload.rn.fr_wwn); + break; + + default: + FC_DBG("Invalid op code %x \n", op); + return -EINVAL; + } + *r_ctl = FC_RCTL_DD_UNSOL_CTL; + *did = FC_FID_DIR_SERV; + *fh_type = FC_TYPE_CT; + return 0; +} + +/** + * fc_plogi_fill - Fill in plogi request frame + */ +static inline void fc_plogi_fill(struct fc_lport *lport, struct fc_frame *fp, + unsigned int op) +{ + struct fc_els_flogi *plogi; + struct fc_els_csp *csp; + struct fc_els_cssp *cp; + + plogi = fc_frame_payload_get(fp, sizeof(*plogi)); + memset(plogi, 0, sizeof(*plogi)); + plogi->fl_cmd = (u8) op; + put_unaligned_be64(lport->wwpn, &plogi->fl_wwpn); + put_unaligned_be64(lport->wwnn, &plogi->fl_wwnn); + + csp = &plogi->fl_csp; + csp->sp_hi_ver = 0x20; + csp->sp_lo_ver = 0x20; + csp->sp_bb_cred = htons(10); /* this gets set by gateway */ + csp->sp_bb_data = htons((u16) lport->mfs); + cp = &plogi->fl_cssp[3 - 1]; /* class 3 parameters */ + cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ); + csp->sp_features = htons(FC_SP_FT_CIRO); + csp->sp_tot_seq = htons(255); /* seq. we accept */ + csp->sp_rel_off = htons(0x1f); + csp->sp_e_d_tov = htonl(lport->e_d_tov); + + cp->cp_rdfs = htons((u16) lport->mfs); + cp->cp_con_seq = htons(255); + cp->cp_open_seq = 1; +} + +/** + * fc_flogi_fill - Fill in a flogi request frame. + */ +static inline void fc_flogi_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_csp *sp; + struct fc_els_cssp *cp; + struct fc_els_flogi *flogi; + + flogi = fc_frame_payload_get(fp, sizeof(*flogi)); + memset(flogi, 0, sizeof(*flogi)); + flogi->fl_cmd = (u8) ELS_FLOGI; + put_unaligned_be64(lport->wwpn, &flogi->fl_wwpn); + put_unaligned_be64(lport->wwnn, &flogi->fl_wwnn); + sp = &flogi->fl_csp; + sp->sp_hi_ver = 0x20; + sp->sp_lo_ver = 0x20; + sp->sp_bb_cred = htons(10); /* this gets set by gateway */ + sp->sp_bb_data = htons((u16) lport->mfs); + cp = &flogi->fl_cssp[3 - 1]; /* class 3 parameters */ + cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ); +} + +/** + * fc_logo_fill - Fill in a logo request frame. + */ +static inline void fc_logo_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_logo *logo; + + logo = fc_frame_payload_get(fp, sizeof(*logo)); + memset(logo, 0, sizeof(*logo)); + logo->fl_cmd = ELS_LOGO; + hton24(logo->fl_n_port_id, fc_host_port_id(lport->host)); + logo->fl_n_port_wwn = htonll(lport->wwpn); +} + +/** + * fc_rtv_fill - Fill in RTV (read timeout value) request frame. + */ +static inline void fc_rtv_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_rtv *rtv; + + rtv = fc_frame_payload_get(fp, sizeof(*rtv)); + memset(rtv, 0, sizeof(*rtv)); + rtv->rtv_cmd = ELS_RTV; +} + +/** + * fc_rec_fill - Fill in rec request frame + */ +static inline void fc_rec_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_rec *rec; + struct fc_exch *ep = fc_seq_exch(fr_seq(fp)); + + rec = fc_frame_payload_get(fp, sizeof(*rec)); + memset(rec, 0, sizeof(*rec)); + rec->rec_cmd = ELS_REC; + hton24(rec->rec_s_id, fc_host_port_id(lport->host)); + rec->rec_ox_id = htons(ep->oxid); + rec->rec_rx_id = htons(ep->rxid); +} + +/** + * fc_prli_fill - Fill in prli request frame + */ +static inline void fc_prli_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + + pp = fc_frame_payload_get(fp, sizeof(*pp)); + memset(pp, 0, sizeof(*pp)); + pp->prli.prli_cmd = ELS_PRLI; + pp->prli.prli_spp_len = sizeof(struct fc_els_spp); + pp->prli.prli_len = htons(sizeof(*pp)); + pp->spp.spp_type = FC_TYPE_FCP; + pp->spp.spp_flags = FC_SPP_EST_IMG_PAIR; + pp->spp.spp_params = htonl(lport->service_params); +} + +/** + * fc_scr_fill - Fill in a scr request frame. + */ +static inline void fc_scr_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_scr *scr; + + scr = fc_frame_payload_get(fp, sizeof(*scr)); + memset(scr, 0, sizeof(*scr)); + scr->scr_cmd = ELS_SCR; + scr->scr_reg_func = ELS_SCRF_FULL; +} + +/** + * fc_els_fill - Fill in an ELS request frame + */ +static inline int fc_els_fill(struct fc_lport *lport, struct fc_rport *rport, + struct fc_frame *fp, unsigned int op, + enum fc_rctl *r_ctl, u32 *did, enum fc_fh_type *fh_type) +{ + switch (op) { + case ELS_PLOGI: + fc_plogi_fill(lport, fp, ELS_PLOGI); + *did = rport->port_id; + break; + + case ELS_FLOGI: + fc_flogi_fill(lport, fp); + *did = FC_FID_FLOGI; + break; + + case ELS_LOGO: + fc_logo_fill(lport, fp); + *did = FC_FID_FLOGI; + /* + * if rport is valid then it + * is port logo, therefore + * set did to rport id. + */ + if (rport) + *did = rport->port_id; + break; + + case ELS_RTV: + fc_rtv_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_REC: + fc_rec_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_PRLI: + fc_prli_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_SCR: + fc_scr_fill(lport, fp); + *did = FC_FID_FCTRL; + break; + + default: + FC_DBG("Invalid op code %x \n", op); + return -EINVAL; + } + + *r_ctl = FC_RCTL_ELS_REQ; + *fh_type = FC_TYPE_ELS; + return 0; +} +#endif /* _FC_ENCODE_H_ */ diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h new file mode 100644 index 00000000000..04d34a71355 --- /dev/null +++ b/include/scsi/fc_frame.h @@ -0,0 +1,242 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FRAME_H_ +#define _FC_FRAME_H_ + +#include <linux/scatterlist.h> +#include <linux/skbuff.h> +#include <scsi/scsi_cmnd.h> + +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_fcp.h> +#include <scsi/fc/fc_encaps.h> + +/* + * The fc_frame interface is used to pass frame data between functions. + * The frame includes the data buffer, length, and SOF / EOF delimiter types. + * A pointer to the port structure of the receiving port is also includeded. + */ + +#define FC_FRAME_HEADROOM 32 /* headroom for VLAN + FCoE headers */ +#define FC_FRAME_TAILROOM 8 /* trailer space for FCoE */ + +/* + * Information about an individual fibre channel frame received or to be sent. + * The buffer may be in up to 4 additional non-contiguous sections, + * but the linear section must hold the frame header. + */ +#define FC_FRAME_SG_LEN 4 /* scatter/gather list maximum length */ + +#define fp_skb(fp) (&((fp)->skb)) +#define fr_hdr(fp) ((fp)->skb.data) +#define fr_len(fp) ((fp)->skb.len) +#define fr_cb(fp) ((struct fcoe_rcv_info *)&((fp)->skb.cb[0])) +#define fr_dev(fp) (fr_cb(fp)->fr_dev) +#define fr_seq(fp) (fr_cb(fp)->fr_seq) +#define fr_sof(fp) (fr_cb(fp)->fr_sof) +#define fr_eof(fp) (fr_cb(fp)->fr_eof) +#define fr_flags(fp) (fr_cb(fp)->fr_flags) +#define fr_max_payload(fp) (fr_cb(fp)->fr_max_payload) +#define fr_cmd(fp) (fr_cb(fp)->fr_cmd) +#define fr_dir(fp) (fr_cmd(fp)->sc_data_direction) +#define fr_crc(fp) (fr_cb(fp)->fr_crc) + +struct fc_frame { + struct sk_buff skb; +}; + +struct fcoe_rcv_info { + struct packet_type *ptype; + struct fc_lport *fr_dev; /* transport layer private pointer */ + struct fc_seq *fr_seq; /* for use with exchange manager */ + struct scsi_cmnd *fr_cmd; /* for use of scsi command */ + u32 fr_crc; + u16 fr_max_payload; /* max FC payload */ + enum fc_sof fr_sof; /* start of frame delimiter */ + enum fc_eof fr_eof; /* end of frame delimiter */ + u8 fr_flags; /* flags - see below */ +}; + + +/* + * Get fc_frame pointer for an skb that's already been imported. + */ +static inline struct fcoe_rcv_info *fcoe_dev_from_skb(const struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(struct fcoe_rcv_info) > sizeof(skb->cb)); + return (struct fcoe_rcv_info *) skb->cb; +} + +/* + * fr_flags. + */ +#define FCPHF_CRC_UNCHECKED 0x01 /* CRC not computed, still appended */ + +/* + * Initialize a frame. + * We don't do a complete memset here for performance reasons. + * The caller must set fr_free, fr_hdr, fr_len, fr_sof, and fr_eof eventually. + */ +static inline void fc_frame_init(struct fc_frame *fp) +{ + fr_dev(fp) = NULL; + fr_seq(fp) = NULL; + fr_flags(fp) = 0; +} + +struct fc_frame *fc_frame_alloc_fill(struct fc_lport *, size_t payload_len); + +struct fc_frame *__fc_frame_alloc(size_t payload_len); + +/* + * Get frame for sending via port. + */ +static inline struct fc_frame *_fc_frame_alloc(struct fc_lport *dev, + size_t payload_len) +{ + return __fc_frame_alloc(payload_len); +} + +/* + * Allocate fc_frame structure and buffer. Set the initial length to + * payload_size + sizeof (struct fc_frame_header). + */ +static inline struct fc_frame *fc_frame_alloc(struct fc_lport *dev, size_t len) +{ + struct fc_frame *fp; + + /* + * Note: Since len will often be a constant multiple of 4, + * this check will usually be evaluated and eliminated at compile time. + */ + if ((len % 4) != 0) + fp = fc_frame_alloc_fill(dev, len); + else + fp = _fc_frame_alloc(dev, len); + return fp; +} + +/* + * Free the fc_frame structure and buffer. + */ +static inline void fc_frame_free(struct fc_frame *fp) +{ + kfree_skb(fp_skb(fp)); +} + +static inline int fc_frame_is_linear(struct fc_frame *fp) +{ + return !skb_is_nonlinear(fp_skb(fp)); +} + +/* + * Get frame header from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. + */ +static inline +struct fc_frame_header *fc_frame_header_get(const struct fc_frame *fp) +{ + WARN_ON(fr_len(fp) < sizeof(struct fc_frame_header)); + return (struct fc_frame_header *) fr_hdr(fp); +} + +/* + * Get frame payload from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. + * The len parameter is the minimum length for the payload portion. + * Returns NULL if the frame is too short. + * + * This assumes the interesting part of the payload is in the first part + * of the buffer for received data. This may not be appropriate to use for + * buffers being transmitted. + */ +static inline void *fc_frame_payload_get(const struct fc_frame *fp, + size_t len) +{ + void *pp = NULL; + + if (fr_len(fp) >= sizeof(struct fc_frame_header) + len) + pp = fc_frame_header_get(fp) + 1; + return pp; +} + +/* + * Get frame payload opcode (first byte) from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. Return 0 + * if the frame has no payload. + */ +static inline u8 fc_frame_payload_op(const struct fc_frame *fp) +{ + u8 *cp; + + cp = fc_frame_payload_get(fp, sizeof(u8)); + if (!cp) + return 0; + return *cp; + +} + +/* + * Get FC class from frame. + */ +static inline enum fc_class fc_frame_class(const struct fc_frame *fp) +{ + return fc_sof_class(fr_sof(fp)); +} + +/* + * Check the CRC in a frame. + * The CRC immediately follows the last data item *AFTER* the length. + * The return value is zero if the CRC matches. + */ +u32 fc_frame_crc_check(struct fc_frame *); + +static inline u8 fc_frame_rctl(const struct fc_frame *fp) +{ + return fc_frame_header_get(fp)->fh_r_ctl; +} + +static inline bool fc_frame_is_cmd(const struct fc_frame *fp) +{ + return fc_frame_rctl(fp) == FC_RCTL_DD_UNSOL_CMD; +} + +static inline bool fc_frame_is_read(const struct fc_frame *fp) +{ + if (fc_frame_is_cmd(fp) && fr_cmd(fp)) + return fr_dir(fp) == DMA_FROM_DEVICE; + return false; +} + +static inline bool fc_frame_is_write(const struct fc_frame *fp) +{ + if (fc_frame_is_cmd(fp) && fr_cmd(fp)) + return fr_dir(fp) == DMA_TO_DEVICE; + return false; +} + +/* + * Check for leaks. + * Print the frame header of any currently allocated frame, assuming there + * should be none at this point. + */ +void fc_frame_leak_check(void); + +#endif /* _FC_FRAME_H_ */ diff --git a/include/scsi/fc_transport_fcoe.h b/include/scsi/fc_transport_fcoe.h new file mode 100644 index 00000000000..8dca2af14ff --- /dev/null +++ b/include/scsi/fc_transport_fcoe.h @@ -0,0 +1,54 @@ +#ifndef FC_TRANSPORT_FCOE_H +#define FC_TRANSPORT_FCOE_H + +#include <linux/device.h> +#include <linux/netdevice.h> +#include <scsi/scsi_host.h> +#include <scsi/libfc.h> + +/** + * struct fcoe_transport - FCoE transport struct for generic transport + * for Ethernet devices as well as pure HBAs + * + * @name: name for thsi transport + * @bus: physical bus type (pci_bus_type) + * @driver: physical bus driver for network device + * @create: entry create function + * @destroy: exit destroy function + * @list: list of transports + */ +struct fcoe_transport { + char *name; + unsigned short vendor; + unsigned short device; + struct bus_type *bus; + struct device_driver *driver; + int (*create)(struct net_device *device); + int (*destroy)(struct net_device *device); + bool (*match)(struct net_device *device); + struct list_head list; + struct list_head devlist; + struct mutex devlock; +}; + +/** + * MODULE_ALIAS_FCOE_PCI + * + * some care must be taken with this, vendor and device MUST be a hex value + * preceded with 0x and with letters in lower case (0x12ab, not 0x12AB or 12AB) + */ +#define MODULE_ALIAS_FCOE_PCI(vendor, device) \ + MODULE_ALIAS("fcoe-pci-" __stringify(vendor) "-" __stringify(device)) + +/* exported funcs */ +int fcoe_transport_attach(struct net_device *netdev); +int fcoe_transport_release(struct net_device *netdev); +int fcoe_transport_register(struct fcoe_transport *t); +int fcoe_transport_unregister(struct fcoe_transport *t); +int fcoe_load_transport_driver(struct net_device *netdev); +int __init fcoe_transport_init(void); +int __exit fcoe_transport_exit(void); + +/* fcow_sw is the default transport */ +extern struct fcoe_transport fcoe_sw_transport; +#endif /* FC_TRANSPORT_FCOE_H */ diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 0c9514de5df..d0ed5226f8c 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -333,8 +333,11 @@ enum iscsi_host_param { #define CAP_TEXT_NEGO 0x80 #define CAP_MARKERS 0x100 #define CAP_FW_DB 0x200 -#define CAP_SENDTARGETS_OFFLOAD 0x400 -#define CAP_DATA_PATH_OFFLOAD 0x800 +#define CAP_SENDTARGETS_OFFLOAD 0x400 /* offload discovery process */ +#define CAP_DATA_PATH_OFFLOAD 0x800 /* offload entire IO path */ +#define CAP_DIGEST_OFFLOAD 0x1000 /* offload hdr and data digests */ +#define CAP_PADDING_OFFLOAD 0x2000 /* offload padding insertion, removal, + and verification */ /* * These flags describes reason of stop_conn() call diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h new file mode 100644 index 00000000000..9f2876397dd --- /dev/null +++ b/include/scsi/libfc.h @@ -0,0 +1,938 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _LIBFC_H_ +#define _LIBFC_H_ + +#include <linux/timer.h> +#include <linux/if.h> + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_fc.h> + +#include <scsi/fc/fc_fcp.h> +#include <scsi/fc/fc_ns.h> +#include <scsi/fc/fc_els.h> +#include <scsi/fc/fc_gs.h> + +#include <scsi/fc_frame.h> + +#define LIBFC_DEBUG + +#ifdef LIBFC_DEBUG +/* Log messages */ +#define FC_DBG(fmt, args...) \ + do { \ + printk(KERN_INFO "%s " fmt, __func__, ##args); \ + } while (0) +#else +#define FC_DBG(fmt, args...) +#endif + +/* + * libfc error codes + */ +#define FC_NO_ERR 0 /* no error */ +#define FC_EX_TIMEOUT 1 /* Exchange timeout */ +#define FC_EX_CLOSED 2 /* Exchange closed */ + +/* some helpful macros */ + +#define ntohll(x) be64_to_cpu(x) +#define htonll(x) cpu_to_be64(x) + +#define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2])) + +#define hton24(p, v) do { \ + p[0] = (((v) >> 16) & 0xFF); \ + p[1] = (((v) >> 8) & 0xFF); \ + p[2] = ((v) & 0xFF); \ + } while (0) + +/* + * FC HBA status + */ +#define FC_PAUSE (1 << 1) +#define FC_LINK_UP (1 << 0) + +enum fc_lport_state { + LPORT_ST_NONE = 0, + LPORT_ST_FLOGI, + LPORT_ST_DNS, + LPORT_ST_RPN_ID, + LPORT_ST_RFT_ID, + LPORT_ST_SCR, + LPORT_ST_READY, + LPORT_ST_LOGO, + LPORT_ST_RESET +}; + +enum fc_disc_event { + DISC_EV_NONE = 0, + DISC_EV_SUCCESS, + DISC_EV_FAILED +}; + +enum fc_rport_state { + RPORT_ST_NONE = 0, + RPORT_ST_INIT, /* initialized */ + RPORT_ST_PLOGI, /* waiting for PLOGI completion */ + RPORT_ST_PRLI, /* waiting for PRLI completion */ + RPORT_ST_RTV, /* waiting for RTV completion */ + RPORT_ST_READY, /* ready for use */ + RPORT_ST_LOGO, /* port logout sent */ +}; + +enum fc_rport_trans_state { + FC_PORTSTATE_ROGUE, + FC_PORTSTATE_REAL, +}; + +/** + * struct fc_disc_port - temporary discovery port to hold rport identifiers + * @lp: Fibre Channel host port instance + * @peers: node for list management during discovery and RSCN processing + * @ids: identifiers structure to pass to fc_remote_port_add() + * @rport_work: work struct for starting the rport state machine + */ +struct fc_disc_port { + struct fc_lport *lp; + struct list_head peers; + struct fc_rport_identifiers ids; + struct work_struct rport_work; +}; + +enum fc_rport_event { + RPORT_EV_NONE = 0, + RPORT_EV_CREATED, + RPORT_EV_FAILED, + RPORT_EV_STOP, + RPORT_EV_LOGO +}; + +struct fc_rport_operations { + void (*event_callback)(struct fc_lport *, struct fc_rport *, + enum fc_rport_event); +}; + +/** + * struct fc_rport_libfc_priv - libfc internal information about a remote port + * @local_port: Fibre Channel host port instance + * @rp_state: state tracks progress of PLOGI, PRLI, and RTV exchanges + * @flags: REC and RETRY supported flags + * @max_seq: maximum number of concurrent sequences + * @retries: retry count in current state + * @e_d_tov: error detect timeout value (in msec) + * @r_a_tov: resource allocation timeout value (in msec) + * @rp_mutex: mutex protects rport + * @retry_work: + * @event_callback: Callback for rport READY, FAILED or LOGO + */ +struct fc_rport_libfc_priv { + struct fc_lport *local_port; + enum fc_rport_state rp_state; + u16 flags; + #define FC_RP_FLAGS_REC_SUPPORTED (1 << 0) + #define FC_RP_FLAGS_RETRY (1 << 1) + u16 max_seq; + unsigned int retries; + unsigned int e_d_tov; + unsigned int r_a_tov; + enum fc_rport_trans_state trans_state; + struct mutex rp_mutex; + struct delayed_work retry_work; + enum fc_rport_event event; + struct fc_rport_operations *ops; + struct list_head peers; + struct work_struct event_work; +}; + +#define PRIV_TO_RPORT(x) \ + (struct fc_rport *)((void *)x - sizeof(struct fc_rport)); +#define RPORT_TO_PRIV(x) \ + (struct fc_rport_libfc_priv *)((void *)x + sizeof(struct fc_rport)); + +struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *); + +static inline void fc_rport_set_name(struct fc_rport *rport, u64 wwpn, u64 wwnn) +{ + rport->node_name = wwnn; + rport->port_name = wwpn; +} + +/* + * fcoe stats structure + */ +struct fcoe_dev_stats { + u64 SecondsSinceLastReset; + u64 TxFrames; + u64 TxWords; + u64 RxFrames; + u64 RxWords; + u64 ErrorFrames; + u64 DumpedFrames; + u64 LinkFailureCount; + u64 LossOfSignalCount; + u64 InvalidTxWordCount; + u64 InvalidCRCCount; + u64 InputRequests; + u64 OutputRequests; + u64 ControlRequests; + u64 InputMegabytes; + u64 OutputMegabytes; +}; + +/* + * els data is used for passing ELS respone specific + * data to send ELS response mainly using infomation + * in exchange and sequence in EM layer. + */ +struct fc_seq_els_data { + struct fc_frame *fp; + enum fc_els_rjt_reason reason; + enum fc_els_rjt_explan explan; +}; + +/* + * FCP request structure, one for each scsi cmd request + */ +struct fc_fcp_pkt { + /* + * housekeeping stuff + */ + struct fc_lport *lp; /* handle to hba struct */ + u16 state; /* scsi_pkt state state */ + u16 tgt_flags; /* target flags */ + atomic_t ref_cnt; /* fcp pkt ref count */ + spinlock_t scsi_pkt_lock; /* Must be taken before the host lock + * if both are held at the same time */ + /* + * SCSI I/O related stuff + */ + struct scsi_cmnd *cmd; /* scsi command pointer. set/clear + * under host lock */ + struct list_head list; /* tracks queued commands. access under + * host lock */ + /* + * timeout related stuff + */ + struct timer_list timer; /* command timer */ + struct completion tm_done; + int wait_for_comp; + unsigned long start_time; /* start jiffie */ + unsigned long end_time; /* end jiffie */ + unsigned long last_pkt_time; /* jiffies of last frame received */ + + /* + * scsi cmd and data transfer information + */ + u32 data_len; + /* + * transport related veriables + */ + struct fcp_cmnd cdb_cmd; + size_t xfer_len; + u32 xfer_contig_end; /* offset of end of contiguous xfer */ + u16 max_payload; /* max payload size in bytes */ + + /* + * scsi/fcp return status + */ + u32 io_status; /* SCSI result upper 24 bits */ + u8 cdb_status; + u8 status_code; /* FCP I/O status */ + /* bit 3 Underrun bit 2: overrun */ + u8 scsi_comp_flags; + u32 req_flags; /* bit 0: read bit:1 write */ + u32 scsi_resid; /* residule length */ + + struct fc_rport *rport; /* remote port pointer */ + struct fc_seq *seq_ptr; /* current sequence pointer */ + /* + * Error Processing + */ + u8 recov_retry; /* count of recovery retries */ + struct fc_seq *recov_seq; /* sequence for REC or SRR */ +}; + +/* + * Structure and function definitions for managing Fibre Channel Exchanges + * and Sequences + * + * fc_exch holds state for one exchange and links to its active sequence. + * + * fc_seq holds the state for an individual sequence. + */ + +struct fc_exch_mgr; + +/* + * Sequence. + */ +struct fc_seq { + u8 id; /* seq ID */ + u16 ssb_stat; /* status flags for sequence status block */ + u16 cnt; /* frames sent so far on sequence */ + u32 rec_data; /* FC-4 value for REC */ +}; + +#define FC_EX_DONE (1 << 0) /* ep is completed */ +#define FC_EX_RST_CLEANUP (1 << 1) /* reset is forcing completion */ + +/* + * Exchange. + * + * Locking notes: The ex_lock protects following items: + * state, esb_stat, f_ctl, seq.ssb_stat + * seq_id + * sequence allocation + */ +struct fc_exch { + struct fc_exch_mgr *em; /* exchange manager */ + u32 state; /* internal driver state */ + u16 xid; /* our exchange ID */ + struct list_head ex_list; /* free or busy list linkage */ + spinlock_t ex_lock; /* lock covering exchange state */ + atomic_t ex_refcnt; /* reference counter */ + struct delayed_work timeout_work; /* timer for upper level protocols */ + struct fc_lport *lp; /* fc device instance */ + u16 oxid; /* originator's exchange ID */ + u16 rxid; /* responder's exchange ID */ + u32 oid; /* originator's FCID */ + u32 sid; /* source FCID */ + u32 did; /* destination FCID */ + u32 esb_stat; /* exchange status for ESB */ + u32 r_a_tov; /* r_a_tov from rport (msec) */ + u8 seq_id; /* next sequence ID to use */ + u32 f_ctl; /* F_CTL flags for sequences */ + u8 fh_type; /* frame type */ + enum fc_class class; /* class of service */ + struct fc_seq seq; /* single sequence */ + /* + * Handler for responses to this current exchange. + */ + void (*resp)(struct fc_seq *, struct fc_frame *, void *); + void (*destructor)(struct fc_seq *, void *); + /* + * arg is passed as void pointer to exchange + * resp and destructor handlers + */ + void *arg; +}; +#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) + +struct libfc_function_template { + + /** + * Mandatory Fields + * + * These handlers must be implemented by the LLD. + */ + + /* + * Interface to send a FC frame + */ + int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); + + /** + * Optional Fields + * + * The LLD may choose to implement any of the following handlers. + * If LLD doesn't specify hander and leaves its pointer NULL then + * the default libfc function will be used for that handler. + */ + + /** + * ELS/CT interfaces + */ + + /* + * elsct_send - sends ELS/CT frame + */ + struct fc_seq *(*elsct_send)(struct fc_lport *lport, + struct fc_rport *rport, + struct fc_frame *fp, + unsigned int op, + void (*resp)(struct fc_seq *, + struct fc_frame *fp, + void *arg), + void *arg, u32 timer_msec); + /** + * Exhance Manager interfaces + */ + + /* + * Send the FC frame payload using a new exchange and sequence. + * + * The frame pointer with some of the header's fields must be + * filled before calling exch_seq_send(), those fields are, + * + * - routing control + * - FC port did + * - FC port sid + * - FC header type + * - frame control + * - parameter or relative offset + * + * The exchange response handler is set in this routine to resp() + * function pointer. It can be called in two scenarios: if a timeout + * occurs or if a response frame is received for the exchange. The + * fc_frame pointer in response handler will also indicate timeout + * as error using IS_ERR related macros. + * + * The exchange destructor handler is also set in this routine. + * The destructor handler is invoked by EM layer when exchange + * is about to free, this can be used by caller to free its + * resources along with exchange free. + * + * The arg is passed back to resp and destructor handler. + * + * The timeout value (in msec) for an exchange is set if non zero + * timer_msec argument is specified. The timer is canceled when + * it fires or when the exchange is done. The exchange timeout handler + * is registered by EM layer. + */ + struct fc_seq *(*exch_seq_send)(struct fc_lport *lp, + struct fc_frame *fp, + void (*resp)(struct fc_seq *sp, + struct fc_frame *fp, + void *arg), + void (*destructor)(struct fc_seq *sp, + void *arg), + void *arg, unsigned int timer_msec); + + /* + * send a frame using existing sequence and exchange. + */ + int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp, + struct fc_frame *fp); + + /* + * Send ELS response using mainly infomation + * in exchange and sequence in EM layer. + */ + void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd, + struct fc_seq_els_data *els_data); + + /* + * Abort an exchange and sequence. Generally called because of a + * exchange timeout or an abort from the upper layer. + * + * A timer_msec can be specified for abort timeout, if non-zero + * timer_msec value is specified then exchange resp handler + * will be called with timeout error if no response to abort. + */ + int (*seq_exch_abort)(const struct fc_seq *req_sp, + unsigned int timer_msec); + + /* + * Indicate that an exchange/sequence tuple is complete and the memory + * allocated for the related objects may be freed. + */ + void (*exch_done)(struct fc_seq *sp); + + /* + * Assigns a EM and a free XID for an new exchange and then + * allocates a new exchange and sequence pair. + * The fp can be used to determine free XID. + */ + struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp); + + /* + * Release previously assigned XID by exch_get API. + * The LLD may implement this if XID is assigned by LLD + * in exch_get(). + */ + void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp, + u16 ex_id); + + /* + * Start a new sequence on the same exchange/sequence tuple. + */ + struct fc_seq *(*seq_start_next)(struct fc_seq *sp); + + /* + * Reset an exchange manager, completing all sequences and exchanges. + * If s_id is non-zero, reset only exchanges originating from that FID. + * If d_id is non-zero, reset only exchanges sending to that FID. + */ + void (*exch_mgr_reset)(struct fc_exch_mgr *, + u32 s_id, u32 d_id); + + void (*rport_flush_queue)(void); + /** + * Local Port interfaces + */ + + /* + * Receive a frame to a local port. + */ + void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp, + struct fc_frame *fp); + + int (*lport_reset)(struct fc_lport *); + + /** + * Remote Port interfaces + */ + + /* + * Initiates the RP state machine. It is called from the LP module. + * This function will issue the following commands to the N_Port + * identified by the FC ID provided. + * + * - PLOGI + * - PRLI + * - RTV + */ + int (*rport_login)(struct fc_rport *rport); + + /* + * Logoff, and remove the rport from the transport if + * it had been added. This will send a LOGO to the target. + */ + int (*rport_logoff)(struct fc_rport *rport); + + /* + * Recieve a request from a remote port. + */ + void (*rport_recv_req)(struct fc_seq *, struct fc_frame *, + struct fc_rport *); + + struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); + + /** + * FCP interfaces + */ + + /* + * Send a fcp cmd from fsp pkt. + * Called with the SCSI host lock unlocked and irqs disabled. + * + * The resp handler is called when FCP_RSP received. + * + */ + int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp, + void (*resp)(struct fc_seq *, struct fc_frame *fp, + void *arg)); + + /* + * Used at least durring linkdown and reset + */ + void (*fcp_cleanup)(struct fc_lport *lp); + + /* + * Abort all I/O on a local port + */ + void (*fcp_abort_io)(struct fc_lport *lp); + + /** + * Discovery interfaces + */ + + void (*disc_recv_req)(struct fc_seq *, + struct fc_frame *, struct fc_lport *); + + /* + * Start discovery for a local port. + */ + void (*disc_start)(void (*disc_callback)(struct fc_lport *, + enum fc_disc_event), + struct fc_lport *); + + /* + * Stop discovery for a given lport. This will remove + * all discovered rports + */ + void (*disc_stop) (struct fc_lport *); + + /* + * Stop discovery for a given lport. This will block + * until all discovered rports are deleted from the + * FC transport class + */ + void (*disc_stop_final) (struct fc_lport *); +}; + +/* information used by the discovery layer */ +struct fc_disc { + unsigned char retry_count; + unsigned char delay; + unsigned char pending; + unsigned char requested; + unsigned short seq_count; + unsigned char buf_len; + enum fc_disc_event event; + + void (*disc_callback)(struct fc_lport *, + enum fc_disc_event); + + struct list_head rports; + struct fc_lport *lport; + struct mutex disc_mutex; + struct fc_gpn_ft_resp partial_buf; /* partial name buffer */ + struct delayed_work disc_work; +}; + +struct fc_lport { + struct list_head list; + + /* Associations */ + struct Scsi_Host *host; + struct fc_exch_mgr *emp; + struct fc_rport *dns_rp; + struct fc_rport *ptp_rp; + void *scsi_priv; + struct fc_disc disc; + + /* Operational Information */ + struct libfc_function_template tt; + u16 link_status; + enum fc_lport_state state; + unsigned long boot_time; + + struct fc_host_statistics host_stats; + struct fcoe_dev_stats *dev_stats[NR_CPUS]; + u64 wwpn; + u64 wwnn; + u8 retry_count; + + /* Capabilities */ + u32 sg_supp:1; /* scatter gather supported */ + u32 seq_offload:1; /* seq offload supported */ + u32 crc_offload:1; /* crc offload supported */ + u32 lro_enabled:1; /* large receive offload */ + u32 mfs; /* max FC payload size */ + unsigned int service_params; + unsigned int e_d_tov; + unsigned int r_a_tov; + u8 max_retry_count; + u16 link_speed; + u16 link_supported_speeds; + u16 lro_xid; /* max xid for fcoe lro */ + struct fc_ns_fts fcts; /* FC-4 type masks */ + struct fc_els_rnid_gen rnid_gen; /* RNID information */ + + /* Semaphores */ + struct mutex lp_mutex; + + /* Miscellaneous */ + struct delayed_work retry_work; + struct delayed_work disc_work; +}; + +/** + * FC_LPORT HELPER FUNCTIONS + *****************************/ +static inline void *lport_priv(const struct fc_lport *lp) +{ + return (void *)(lp + 1); +} + +static inline int fc_lport_test_ready(struct fc_lport *lp) +{ + return lp->state == LPORT_ST_READY; +} + +static inline void fc_set_wwnn(struct fc_lport *lp, u64 wwnn) +{ + lp->wwnn = wwnn; +} + +static inline void fc_set_wwpn(struct fc_lport *lp, u64 wwnn) +{ + lp->wwpn = wwnn; +} + +static inline void fc_lport_state_enter(struct fc_lport *lp, + enum fc_lport_state state) +{ + if (state != lp->state) + lp->retry_count = 0; + lp->state = state; +} + + +/** + * LOCAL PORT LAYER + *****************************/ +int fc_lport_init(struct fc_lport *lp); + +/* + * Destroy the specified local port by finding and freeing all + * fc_rports associated with it and then by freeing the fc_lport + * itself. + */ +int fc_lport_destroy(struct fc_lport *lp); + +/* + * Logout the specified local port from the fabric + */ +int fc_fabric_logoff(struct fc_lport *lp); + +/* + * Initiate the LP state machine. This handler will use fc_host_attr + * to store the FLOGI service parameters, so fc_host_attr must be + * initialized before calling this handler. + */ +int fc_fabric_login(struct fc_lport *lp); + +/* + * The link is up for the given local port. + */ +void fc_linkup(struct fc_lport *); + +/* + * Link is down for the given local port. + */ +void fc_linkdown(struct fc_lport *); + +/* + * Pause and unpause traffic. + */ +void fc_pause(struct fc_lport *); +void fc_unpause(struct fc_lport *); + +/* + * Configure the local port. + */ +int fc_lport_config(struct fc_lport *); + +/* + * Reset the local port. + */ +int fc_lport_reset(struct fc_lport *); + +/* + * Set the mfs or reset + */ +int fc_set_mfs(struct fc_lport *lp, u32 mfs); + + +/** + * REMOTE PORT LAYER + *****************************/ +int fc_rport_init(struct fc_lport *lp); +void fc_rport_terminate_io(struct fc_rport *rp); + +/** + * DISCOVERY LAYER + *****************************/ +int fc_disc_init(struct fc_lport *lp); + + +/** + * SCSI LAYER + *****************************/ +/* + * Initialize the SCSI block of libfc + */ +int fc_fcp_init(struct fc_lport *); + +/* + * This section provides an API which allows direct interaction + * with the SCSI-ml. Each of these functions satisfies a function + * pointer defined in Scsi_Host and therefore is always called + * directly from the SCSI-ml. + */ +int fc_queuecommand(struct scsi_cmnd *sc_cmd, + void (*done)(struct scsi_cmnd *)); + +/* + * complete processing of a fcp packet + * + * This function may sleep if a fsp timer is pending. + * The host lock must not be held by caller. + */ +void fc_fcp_complete(struct fc_fcp_pkt *fsp); + +/* + * Send an ABTS frame to the target device. The sc_cmd argument + * is a pointer to the SCSI command to be aborted. + */ +int fc_eh_abort(struct scsi_cmnd *sc_cmd); + +/* + * Reset a LUN by sending send the tm cmd to the target. + */ +int fc_eh_device_reset(struct scsi_cmnd *sc_cmd); + +/* + * Reset the host adapter. + */ +int fc_eh_host_reset(struct scsi_cmnd *sc_cmd); + +/* + * Check rport status. + */ +int fc_slave_alloc(struct scsi_device *sdev); + +/* + * Adjust the queue depth. + */ +int fc_change_queue_depth(struct scsi_device *sdev, int qdepth); + +/* + * Change the tag type. + */ +int fc_change_queue_type(struct scsi_device *sdev, int tag_type); + +/* + * Free memory pools used by the FCP layer. + */ +void fc_fcp_destroy(struct fc_lport *); + +/** + * ELS/CT interface + *****************************/ +/* + * Initializes ELS/CT interface + */ +int fc_elsct_init(struct fc_lport *lp); + + +/** + * EXCHANGE MANAGER LAYER + *****************************/ +/* + * Initializes Exchange Manager related + * function pointers in struct libfc_function_template. + */ +int fc_exch_init(struct fc_lport *lp); + +/* + * Allocates an Exchange Manager (EM). + * + * The EM manages exchanges for their allocation and + * free, also allows exchange lookup for received + * frame. + * + * The class is used for initializing FC class of + * allocated exchange from EM. + * + * The min_xid and max_xid will limit new + * exchange ID (XID) within this range for + * a new exchange. + * The LLD may choose to have multiple EMs, + * e.g. one EM instance per CPU receive thread in LLD. + * The LLD can use exch_get() of struct libfc_function_template + * to specify XID for a new exchange within + * a specified EM instance. + * + * The em_idx to uniquely identify an EM instance. + */ +struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, + enum fc_class class, + u16 min_xid, + u16 max_xid); + +/* + * Free an exchange manager. + */ +void fc_exch_mgr_free(struct fc_exch_mgr *mp); + +/* + * Receive a frame on specified local port and exchange manager. + */ +void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, + struct fc_frame *fp); + +/* + * This function is for exch_seq_send function pointer in + * struct libfc_function_template, see comment block on + * exch_seq_send for description of this function. + */ +struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, + struct fc_frame *fp, + void (*resp)(struct fc_seq *sp, + struct fc_frame *fp, + void *arg), + void (*destructor)(struct fc_seq *sp, + void *arg), + void *arg, u32 timer_msec); + +/* + * send a frame using existing sequence and exchange. + */ +int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); + +/* + * Send ELS response using mainly infomation + * in exchange and sequence in EM layer. + */ +void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, + struct fc_seq_els_data *els_data); + +/* + * This function is for seq_exch_abort function pointer in + * struct libfc_function_template, see comment block on + * seq_exch_abort for description of this function. + */ +int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec); + +/* + * Indicate that an exchange/sequence tuple is complete and the memory + * allocated for the related objects may be freed. + */ +void fc_exch_done(struct fc_seq *sp); + +/* + * Assigns a EM and XID for a frame and then allocates + * a new exchange and sequence pair. + * The fp can be used to determine free XID. + */ +struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp); + +/* + * Allocate a new exchange and sequence pair. + * if ex_id is zero then next free exchange id + * from specified exchange manger mp will be assigned. + */ +struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, + struct fc_frame *fp, u16 ex_id); +/* + * Start a new sequence on the same exchange as the supplied sequence. + */ +struct fc_seq *fc_seq_start_next(struct fc_seq *sp); + +/* + * Reset an exchange manager, completing all sequences and exchanges. + * If s_id is non-zero, reset only exchanges originating from that FID. + * If d_id is non-zero, reset only exchanges sending to that FID. + */ +void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id); + +/* + * Functions for fc_functions_template + */ +void fc_get_host_speed(struct Scsi_Host *shost); +void fc_get_host_port_type(struct Scsi_Host *shost); +void fc_get_host_port_state(struct Scsi_Host *shost); +void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout); +struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *); + +/* + * module setup functions. + */ +int fc_setup_exch_mgr(void); +void fc_destroy_exch_mgr(void); +int fc_setup_rport(void); +void fc_destroy_rport(void); + +#endif /* _LIBFC_H_ */ diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h new file mode 100644 index 00000000000..89fdbb9a6a1 --- /dev/null +++ b/include/scsi/libfcoe.h @@ -0,0 +1,176 @@ +/* + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _LIBFCOE_H +#define _LIBFCOE_H + +#include <linux/netdevice.h> +#include <linux/skbuff.h> +#include <scsi/fc/fc_fcoe.h> +#include <scsi/libfc.h> + +/* + * this percpu struct for fcoe + */ +struct fcoe_percpu_s { + int cpu; + struct task_struct *thread; + struct sk_buff_head fcoe_rx_list; + struct page *crc_eof_page; + int crc_eof_offset; +}; + +/* + * the fcoe sw transport private data + */ +struct fcoe_softc { + struct list_head list; + struct fc_lport *lp; + struct net_device *real_dev; + struct net_device *phys_dev; /* device with ethtool_ops */ + struct packet_type fcoe_packet_type; + struct sk_buff_head fcoe_pending_queue; + + u8 dest_addr[ETH_ALEN]; + u8 ctl_src_addr[ETH_ALEN]; + u8 data_src_addr[ETH_ALEN]; + /* + * fcoe protocol address learning related stuff + */ + u16 flogi_oxid; + u8 flogi_progress; + u8 address_mode; +}; + +static inline struct fcoe_softc *fcoe_softc( + const struct fc_lport *lp) +{ + return (struct fcoe_softc *)lport_priv(lp); +} + +static inline struct net_device *fcoe_netdev( + const struct fc_lport *lp) +{ + return fcoe_softc(lp)->real_dev; +} + +static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb) +{ + return (struct fcoe_hdr *)skb_network_header(skb); +} + +static inline int skb_fcoe_offset(const struct sk_buff *skb) +{ + return skb_network_offset(skb); +} + +static inline struct fc_frame_header *skb_fc_header(const struct sk_buff *skb) +{ + return (struct fc_frame_header *)skb_transport_header(skb); +} + +static inline int skb_fc_offset(const struct sk_buff *skb) +{ + return skb_transport_offset(skb); +} + +static inline void skb_reset_fc_header(struct sk_buff *skb) +{ + skb_reset_network_header(skb); + skb_set_transport_header(skb, skb_network_offset(skb) + + sizeof(struct fcoe_hdr)); +} + +static inline bool skb_fc_is_data(const struct sk_buff *skb) +{ + return skb_fc_header(skb)->fh_r_ctl == FC_RCTL_DD_SOL_DATA; +} + +static inline bool skb_fc_is_cmd(const struct sk_buff *skb) +{ + return skb_fc_header(skb)->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD; +} + +static inline bool skb_fc_has_exthdr(const struct sk_buff *skb) +{ + return (skb_fc_header(skb)->fh_r_ctl == FC_RCTL_VFTH) || + (skb_fc_header(skb)->fh_r_ctl == FC_RCTL_IFRH) || + (skb_fc_header(skb)->fh_r_ctl == FC_RCTL_ENCH); +} + +static inline bool skb_fc_is_roff(const struct sk_buff *skb) +{ + return skb_fc_header(skb)->fh_f_ctl[2] & FC_FC_REL_OFF; +} + +static inline u16 skb_fc_oxid(const struct sk_buff *skb) +{ + return be16_to_cpu(skb_fc_header(skb)->fh_ox_id); +} + +static inline u16 skb_fc_rxid(const struct sk_buff *skb) +{ + return be16_to_cpu(skb_fc_header(skb)->fh_rx_id); +} + +/* FIXME - DMA_BIDIRECTIONAL ? */ +#define skb_cb(skb) ((struct fcoe_rcv_info *)&((skb)->cb[0])) +#define skb_cmd(skb) (skb_cb(skb)->fr_cmd) +#define skb_dir(skb) (skb_cmd(skb)->sc_data_direction) +static inline bool skb_fc_is_read(const struct sk_buff *skb) +{ + if (skb_fc_is_cmd(skb) && skb_cmd(skb)) + return skb_dir(skb) == DMA_FROM_DEVICE; + return false; +} + +static inline bool skb_fc_is_write(const struct sk_buff *skb) +{ + if (skb_fc_is_cmd(skb) && skb_cmd(skb)) + return skb_dir(skb) == DMA_TO_DEVICE; + return false; +} + +/* libfcoe funcs */ +int fcoe_reset(struct Scsi_Host *shost); +u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], + unsigned int scheme, unsigned int port); + +u32 fcoe_fc_crc(struct fc_frame *fp); +int fcoe_xmit(struct fc_lport *, struct fc_frame *); +int fcoe_rcv(struct sk_buff *, struct net_device *, + struct packet_type *, struct net_device *); + +int fcoe_percpu_receive_thread(void *arg); +void fcoe_clean_pending_queue(struct fc_lport *lp); +void fcoe_percpu_clean(struct fc_lport *lp); +void fcoe_watchdog(ulong vp); +int fcoe_link_ok(struct fc_lport *lp); + +struct fc_lport *fcoe_hostlist_lookup(const struct net_device *); +int fcoe_hostlist_add(const struct fc_lport *); +int fcoe_hostlist_remove(const struct fc_lport *); + +struct Scsi_Host *fcoe_host_alloc(struct scsi_host_template *, int); +int fcoe_libfc_config(struct fc_lport *, struct libfc_function_template *); + +/* fcoe sw hba */ +int __init fcoe_sw_init(void); +int __exit fcoe_sw_exit(void); +#endif /* _LIBFCOE_H */ diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 61e53f14f7e..7360e1916e7 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -30,6 +30,7 @@ #include <linux/workqueue.h> #include <scsi/iscsi_proto.h> #include <scsi/iscsi_if.h> +#include <scsi/scsi_transport_iscsi.h> struct scsi_transport_template; struct scsi_host_template; @@ -70,12 +71,12 @@ enum { /* Connection suspend "bit" */ #define ISCSI_SUSPEND_BIT 1 -#define ISCSI_ITT_MASK (0x1fff) +#define ISCSI_ITT_MASK 0x1fff #define ISCSI_TOTAL_CMDS_MAX 4096 /* this must be a power of two greater than ISCSI_MGMT_CMDS_MAX */ #define ISCSI_TOTAL_CMDS_MIN 16 #define ISCSI_AGE_SHIFT 28 -#define ISCSI_AGE_MASK (0xf << ISCSI_AGE_SHIFT) +#define ISCSI_AGE_MASK 0xf #define ISCSI_ADDRESS_BUF_LEN 64 @@ -93,24 +94,38 @@ enum { ISCSI_TASK_RUNNING, }; +struct iscsi_r2t_info { + __be32 ttt; /* copied from R2T */ + __be32 exp_statsn; /* copied from R2T */ + uint32_t data_length; /* copied from R2T */ + uint32_t data_offset; /* copied from R2T */ + int data_count; /* DATA-Out payload progress */ + int datasn; + /* LLDs should set/update these values */ + int sent; /* R2T sequence progress */ +}; + struct iscsi_task { /* * Because LLDs allocate their hdr differently, this is a pointer * and length to that storage. It must be setup at session * creation time. */ - struct iscsi_cmd *hdr; + struct iscsi_hdr *hdr; unsigned short hdr_max; unsigned short hdr_len; /* accumulated size of hdr used */ + /* copied values in case we need to send tmfs */ + itt_t hdr_itt; + __be32 cmdsn; + uint8_t lun[8]; + int itt; /* this ITT */ - uint32_t unsol_datasn; unsigned imm_count; /* imm-data (bytes) */ - unsigned unsol_count; /* unsolicited (bytes)*/ /* offset in unsolicited stream (bytes); */ - unsigned unsol_offset; - unsigned data_count; /* remaining Data-Out */ + struct iscsi_r2t_info unsol_r2t; char *data; /* mgmt payload */ + unsigned data_count; struct scsi_cmnd *sc; /* associated SCSI cmd*/ struct iscsi_conn *conn; /* used connection */ @@ -121,6 +136,11 @@ struct iscsi_task { void *dd_data; /* driver/transport data */ }; +static inline int iscsi_task_has_unsol_data(struct iscsi_task *task) +{ + return task->unsol_r2t.data_length > task->unsol_r2t.sent; +} + static inline void* iscsi_next_hdr(struct iscsi_task *task) { return (void*)task->hdr + task->hdr_len; @@ -376,8 +396,9 @@ extern void iscsi_suspend_tx(struct iscsi_conn *conn); * pdu and task processing */ extern void iscsi_update_cmdsn(struct iscsi_session *, struct iscsi_nopin *); -extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_task *, - struct iscsi_data *hdr); +extern void iscsi_prep_data_out_pdu(struct iscsi_task *task, + struct iscsi_r2t_info *r2t, + struct iscsi_data *hdr); extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *, char *, uint32_t); extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *, diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h new file mode 100644 index 00000000000..83e32f6d785 --- /dev/null +++ b/include/scsi/libiscsi_tcp.h @@ -0,0 +1,132 @@ +/* + * iSCSI over TCP/IP Data-Path lib + * + * Copyright (C) 2008 Mike Christie + * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * maintained by open-iscsi@googlegroups.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * See the file COPYING included with this distribution for more details. + */ + +#ifndef LIBISCSI_TCP_H +#define LIBISCSI_TCP_H + +#include <scsi/libiscsi.h> + +struct iscsi_tcp_conn; +struct iscsi_segment; +struct sk_buff; +struct hash_desc; + +typedef int iscsi_segment_done_fn_t(struct iscsi_tcp_conn *, + struct iscsi_segment *); + +struct iscsi_segment { + unsigned char *data; + unsigned int size; + unsigned int copied; + unsigned int total_size; + unsigned int total_copied; + + struct hash_desc *hash; + unsigned char recv_digest[ISCSI_DIGEST_SIZE]; + unsigned char digest[ISCSI_DIGEST_SIZE]; + unsigned int digest_len; + + struct scatterlist *sg; + void *sg_mapped; + unsigned int sg_offset; + + iscsi_segment_done_fn_t *done; +}; + +/* Socket connection recieve helper */ +struct iscsi_tcp_recv { + struct iscsi_hdr *hdr; + struct iscsi_segment segment; + + /* Allocate buffer for BHS + AHS */ + uint32_t hdr_buf[64]; + + /* copied and flipped values */ + int datalen; +}; + +struct iscsi_tcp_conn { + struct iscsi_conn *iscsi_conn; + void *dd_data; + int stop_stage; /* conn_stop() flag: * + * stop to recover, * + * stop to terminate */ + /* control data */ + struct iscsi_tcp_recv in; /* TCP receive context */ + /* CRC32C (Rx) LLD should set this is they do not offload */ + struct hash_desc *rx_hash; +}; + +struct iscsi_tcp_task { + uint32_t exp_datasn; /* expected target's R2TSN/DataSN */ + int data_offset; + struct iscsi_r2t_info *r2t; /* in progress solict R2T */ + struct iscsi_pool r2tpool; + struct kfifo *r2tqueue; + void *dd_data; +}; + +enum { + ISCSI_TCP_SEGMENT_DONE, /* curr seg has been processed */ + ISCSI_TCP_SKB_DONE, /* skb is out of data */ + ISCSI_TCP_CONN_ERR, /* iscsi layer has fired a conn err */ + ISCSI_TCP_SUSPENDED, /* conn is suspended */ +}; + +extern void iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn); +extern int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, + unsigned int offset, bool offloaded, int *status); +extern void iscsi_tcp_cleanup_task(struct iscsi_task *task); +extern int iscsi_tcp_task_init(struct iscsi_task *task); +extern int iscsi_tcp_task_xmit(struct iscsi_task *task); + +/* segment helpers */ +extern int iscsi_tcp_recv_segment_is_hdr(struct iscsi_tcp_conn *tcp_conn); +extern int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_segment *segment, int recv, + unsigned copied); +extern void iscsi_tcp_segment_unmap(struct iscsi_segment *segment); + +extern void iscsi_segment_init_linear(struct iscsi_segment *segment, + void *data, size_t size, + iscsi_segment_done_fn_t *done, + struct hash_desc *hash); +extern int +iscsi_segment_seek_sg(struct iscsi_segment *segment, + struct scatterlist *sg_list, unsigned int sg_count, + unsigned int offset, size_t size, + iscsi_segment_done_fn_t *done, struct hash_desc *hash); + +/* digest helpers */ +extern void iscsi_tcp_dgst_header(struct hash_desc *hash, const void *hdr, + size_t hdrlen, + unsigned char digest[ISCSI_DIGEST_SIZE]); +extern struct iscsi_cls_conn * +iscsi_tcp_conn_setup(struct iscsi_cls_session *cls_session, int dd_data_size, + uint32_t conn_idx); +extern void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn); + +/* misc helpers */ +extern int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session); +extern void iscsi_tcp_r2tpool_free(struct iscsi_session *session); + +extern void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, + struct iscsi_stats *stats); +#endif /* LIBISCSI_TCP_H */ diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index a37a8148a31..01a4c58f8ba 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -159,8 +159,6 @@ struct scsi_device { atomic_t iodone_cnt; atomic_t ioerr_cnt; - int timeout; - struct device sdev_gendev, sdev_dev; @@ -367,10 +365,11 @@ extern int scsi_is_target_device(const struct device *); extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, unsigned char *sense, int timeout, int retries, - int flag); + int flag, int *resid); extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, - struct scsi_sense_hdr *, int timeout, int retries); + struct scsi_sense_hdr *, int timeout, int retries, + int *resid); extern int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, int cmd_len, int data_direction, void *buffer, unsigned bufflen, int use_sg, diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index c667cc39654..b50aabe2861 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -113,10 +113,18 @@ struct iscsi_transport { char *data, uint32_t data_size); void (*get_stats) (struct iscsi_cls_conn *conn, struct iscsi_stats *stats); + int (*init_task) (struct iscsi_task *task); int (*xmit_task) (struct iscsi_task *task); - void (*cleanup_task) (struct iscsi_conn *conn, - struct iscsi_task *task); + void (*cleanup_task) (struct iscsi_task *task); + + int (*alloc_pdu) (struct iscsi_task *task, uint8_t opcode); + int (*xmit_pdu) (struct iscsi_task *task); + int (*init_pdu) (struct iscsi_task *task, unsigned int offset, + unsigned int count); + void (*parse_pdu_itt) (struct iscsi_conn *conn, itt_t itt, + int *index, int *age); + void (*session_recovery_timedout) (struct iscsi_cls_session *session); struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr, int non_blocking); |