summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/drm/drmP.h4
-rw-r--r--include/drm/drm_mode.h2
-rw-r--r--include/drm/drm_pciids.h2
-rw-r--r--include/drm/exynos_drm.h7
-rw-r--r--include/drm/radeon_drm.h4
-rw-r--r--include/linux/bio.h10
-rw-r--r--include/linux/ceph/osd_client.h8
-rw-r--r--include/linux/clocksource.h3
-rw-r--r--include/linux/devfreq.h2
-rw-r--r--include/linux/device.h7
-rw-r--r--include/linux/fs.h1
-rw-r--r--include/linux/genhd.h4
-rw-r--r--include/linux/hugetlb.h5
-rw-r--r--include/linux/hwspinlock.h1
-rw-r--r--include/linux/i2c.h3
-rw-r--r--include/linux/inet_diag.h3
-rw-r--r--include/linux/init_task.h1
-rw-r--r--include/linux/kvm.h1
-rw-r--r--include/linux/mfd/tps65910.h3
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/nfs_fs.h3
-rw-r--r--include/linux/nfs_xdr.h1
-rw-r--r--include/linux/pci-ats.h6
-rw-r--r--include/linux/pci.h2
-rw-r--r--include/linux/pci_ids.h2
-rw-r--r--include/linux/pinctrl/pinctrl.h1
-rw-r--r--include/linux/pkt_sched.h6
-rw-r--r--include/linux/pm.h231
-rw-r--r--include/linux/pm_runtime.h6
-rw-r--r--include/linux/pstore.h4
-rw-r--r--include/linux/sched.h1
-rw-r--r--include/linux/serial.h14
-rw-r--r--include/linux/serial_sci.h1
-rw-r--r--include/linux/sh_clk.h4
-rw-r--r--include/linux/sh_pfc.h76
-rw-r--r--include/linux/virtio_config.h2
-rw-r--r--include/linux/virtio_mmio.h2
-rw-r--r--include/linux/vmalloc.h2
-rw-r--r--include/net/bluetooth/l2cap.h7
-rw-r--r--include/net/cfg80211.h4
-rw-r--r--include/net/dst.h7
-rw-r--r--include/net/dst_ops.h2
-rw-r--r--include/net/inet_sock.h2
-rw-r--r--include/net/inetpeer.h1
-rw-r--r--include/net/netfilter/nf_conntrack_ecache.h19
-rw-r--r--include/net/netns/conntrack.h2
-rw-r--r--include/net/red.h15
-rw-r--r--include/net/route.h4
-rw-r--r--include/video/omapdss.h7
-rw-r--r--include/xen/platform_pci.h6
50 files changed, 325 insertions, 188 deletions
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index cf399495d38..1f9e9516e2b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -990,7 +990,9 @@ struct drm_minor {
struct proc_dir_entry *proc_root; /**< proc directory entry */
struct drm_info_node proc_nodes;
struct dentry *debugfs_root;
- struct drm_info_node debugfs_nodes;
+
+ struct list_head debugfs_list;
+ struct mutex debugfs_lock; /* Protects debugfs_list. */
struct drm_master *master; /* currently active master for this node */
struct list_head master_list;
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index d30bedfeb7e..ddd46db65b5 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -235,6 +235,8 @@ struct drm_mode_fb_cmd {
#define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
#define DRM_MODE_FB_DIRTY_FLAGS 0x03
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256
+
/*
* Mark a region of a framebuffer as dirty.
*
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 3d53efd25ab..f81676f1b31 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -4,6 +4,7 @@
*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -55,6 +56,7 @@
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
index 874c4d27132..12050434d57 100644
--- a/include/drm/exynos_drm.h
+++ b/include/drm/exynos_drm.h
@@ -32,13 +32,14 @@
/**
* User-desired buffer creation information structure.
*
- * @size: requested size for the object.
+ * @size: user-desired memory allocation size.
* - this size value would be page-aligned internally.
* @flags: user request for setting memory type or cache attributes.
- * @handle: returned handle for the object.
+ * @handle: returned a handle to created gem object.
+ * - this handle will be set by gem module of kernel side.
*/
struct drm_exynos_gem_create {
- unsigned int size;
+ uint64_t size;
unsigned int flags;
unsigned int handle;
};
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index b65be6054a1..be94be6d6f1 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -874,6 +874,10 @@ struct drm_radeon_gem_pwrite {
#define RADEON_CHUNK_ID_RELOCS 0x01
#define RADEON_CHUNK_ID_IB 0x02
+#define RADEON_CHUNK_ID_FLAGS 0x03
+
+/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */
+#define RADEON_CS_KEEP_TILING_FLAGS 0x01
struct drm_radeon_cs_chunk {
uint32_t chunk_id;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index a3c071c9e18..847994aef0e 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -211,8 +211,8 @@ extern void bio_pair_release(struct bio_pair *dbio);
extern struct bio_set *bioset_create(unsigned int, unsigned int);
extern void bioset_free(struct bio_set *);
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
extern void bio_put(struct bio *);
extern void bio_free(struct bio *, struct bio_set *);
@@ -519,7 +519,11 @@ extern void bio_integrity_init(void);
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c, d) (0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
+{
+ return 0;
+}
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index f88eacb111d..7c05ac202d9 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -10,6 +10,12 @@
#include "osdmap.h"
#include "messenger.h"
+/*
+ * Maximum object name size
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100)
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
@@ -75,7 +81,7 @@ struct ceph_osd_request {
struct inode *r_inode; /* for use by callbacks */
void *r_priv; /* ditto */
- char r_oid[40]; /* object name */
+ char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */
int r_oid_len;
unsigned long r_stamp; /* send OR check time */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 139c4db55f1..c86c940d1de 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
+ * @maxadj maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
@@ -172,7 +173,7 @@ struct clocksource {
u32 mult;
u32 shift;
u64 max_idle_ns;
-
+ u32 maxadj;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb94583960..98ce8124b1c 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@ struct devfreq_dev_status {
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
- void *private_date;
+ void *private_data;
};
/**
diff --git a/include/linux/device.h b/include/linux/device.h
index ffbcf95cd97..3136ede5a1e 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -69,7 +69,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
* @resume: Called to bring a device on this bus out of sleep mode.
* @pm: Power management operations of this bus, callback the specific
* device driver's pm-ops.
- * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU
+ * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU
* driver implementations to a bus and allow the driver to do
* bus-specific setup
* @p: The private data of the driver core, only the driver core can
@@ -682,6 +682,11 @@ static inline bool device_async_suspend_enabled(struct device *dev)
return !!dev->power.async_suspend;
}
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0c4df261af7..e3130220ce3 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1886,6 +1886,7 @@ extern struct dentry *mount_single(struct file_system_type *fs_type,
extern struct dentry *mount_nodev(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
void generic_shutdown_super(struct super_block *sb);
void kill_block_super(struct super_block *sb);
void kill_anon_super(struct super_block *sb);
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 9de31bc98c8..6d18f3531f1 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -21,8 +21,6 @@
#define dev_to_part(device) container_of((device), struct hd_struct, __dev)
#define disk_to_dev(disk) (&(disk)->part0.__dev)
#define part_to_dev(part) (&((part)->__dev))
-#define alias_name(disk) ((disk)->alias ? (disk)->alias : \
- (disk)->disk_name)
extern struct device_type part_type;
extern struct kobject *block_depr;
@@ -60,7 +58,6 @@ enum {
#define DISK_MAX_PARTS 256
#define DISK_NAME_LEN 32
-#define ALIAS_LEN 256
#include <linux/major.h>
#include <linux/device.h>
@@ -166,7 +163,6 @@ struct gendisk {
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
- char *alias; /* alias name of disk */
char *(*devnode)(struct gendisk *gd, mode_t *mode);
unsigned int events; /* supported events */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 19644e0016b..d9d6c868b86 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -110,11 +110,6 @@ static inline void copy_huge_page(struct page *dst, struct page *src)
#define hugetlb_change_protection(vma, address, end, newprot)
-#ifndef HPAGE_MASK
-#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */
-#define HPAGE_SIZE PAGE_SIZE
-#endif
-
#endif /* !CONFIG_HUGETLB_PAGE */
#define HUGETLB_ANON_FILE "anon_hugepage"
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 08a2fee4065..aad6bd4b3ef 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
- return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a81bf6d23b3..07d103a06d6 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -432,9 +432,6 @@ void i2c_unlock_adapter(struct i2c_adapter *);
/* Internal numbers to terminate lists */
#define I2C_CLIENT_END 0xfffeU
-/* The numbers to use to set I2C bus address */
-#define ANY_I2C_BUS 0xffff
-
/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
#define I2C_ADDRS(addr, addrs...) \
((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index 80b480c9753..abf5028db98 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -98,9 +98,10 @@ enum {
INET_DIAG_VEGASINFO,
INET_DIAG_CONG,
INET_DIAG_TOS,
+ INET_DIAG_TCLASS,
};
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
/* INET_DIAG_MEM */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 08ffab01e76..94b1e356c02 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -184,7 +184,6 @@ extern struct cred init_cred;
[PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \
}, \
.thread_group = LIST_HEAD_INIT(tsk.thread_group), \
- .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \
INIT_IDS \
INIT_PERF_EVENTS(tsk) \
INIT_TRACE_IRQFLAGS \
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index f47fcd30273..c3892fc1d53 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -555,7 +555,6 @@ struct kvm_ppc_pvinfo {
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 82b4c8801a4..8bf2cb9502d 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -243,7 +243,8 @@
/*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLTS 73
+#define VDD1_2_NUM_VOLT_FINE 73
+#define VDD1_2_NUM_VOLT_COARSE 3
#define VDD1_2_MIN_VOLT 6000
#define VDD1_2_OFFSET 125
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cbeb5867cff..a82ad4dd306 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void);
extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
extern void dev_seq_stop(struct seq_file *seq, void *v);
+extern int dev_seq_open_ops(struct inode *inode, struct file *file,
+ const struct seq_operations *ops);
#endif
extern int netdev_class_create_file(struct class_attribute *class_attr);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index ab2c6343361..92ecf5585fa 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations;
extern const struct inode_operations nfs3_file_inode_operations;
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
extern const struct address_space_operations nfs_file_aops;
extern const struct address_space_operations nfs_dir_aops;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index c74595ba709..2a7c533be5d 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1192,6 +1192,7 @@ struct nfs_rpc_ops {
const struct dentry_operations *dentry_ops;
const struct inode_operations *dir_inode_ops;
const struct inode_operations *file_inode_ops;
+ const struct file_operations *file_ops;
int (*getroot) (struct nfs_server *, struct nfs_fh *,
struct nfs_fsinfo *);
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index e3d0b389024..7ef68724f0f 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -12,7 +12,7 @@ struct pci_ats {
unsigned int is_enabled:1; /* Enable bit is set */
};
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
extern int pci_enable_ats(struct pci_dev *dev, int ps);
extern void pci_disable_ats(struct pci_dev *dev);
@@ -29,7 +29,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
return dev->ats && dev->ats->is_enabled;
}
-#else /* CONFIG_PCI_IOV */
+#else /* CONFIG_PCI_ATS */
static inline int pci_enable_ats(struct pci_dev *dev, int ps)
{
@@ -50,7 +50,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
return 0;
}
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_ATS */
#ifdef CONFIG_PCI_PRI
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 337df0d5d5f..7cda65b5f79 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -338,7 +338,7 @@ struct pci_dev {
struct list_head msi_list;
#endif
struct pci_vpd *vpd;
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
union {
struct pci_sriov *sriov; /* SR-IOV capability related */
struct pci_dev *physfn; /* the PF this VF is associated with */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3fdf251389d..172ba70306d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2405,6 +2405,8 @@
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_ASMEDIA 0x1b21
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 3605e947fa9..04c011038f3 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
+struct pinctrl_dev;
/* Sufficiently stupid default function when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index c5336705921..7281d5acf2f 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -30,7 +30,7 @@
*/
struct tc_stats {
- __u64 bytes; /* NUmber of enqueues bytes */
+ __u64 bytes; /* Number of enqueued bytes */
__u32 packets; /* Number of enqueued packets */
__u32 drops; /* Packets dropped because of lack of resources */
__u32 overlimits; /* Number of throttle events when this
@@ -297,7 +297,7 @@ struct tc_htb_glob {
__u32 debug; /* debug flags */
/* stats */
- __u32 direct_pkts; /* count of non shapped packets */
+ __u32 direct_pkts; /* count of non shaped packets */
};
enum {
TCA_HTB_UNSPEC,
@@ -503,7 +503,7 @@ enum {
};
#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
-/* State transition probablities for 4 state model */
+/* State transition probabilities for 4 state model */
struct tc_netem_gimodel {
__u32 p13;
__u32 p31;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index f15acb64681..3f3ed83a9aa 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -54,118 +54,145 @@ typedef struct pm_message {
/**
* struct dev_pm_ops - device PM callbacks
*
- * Several driver power state transitions are externally visible, affecting
+ * Several device power state transitions are externally visible, affecting
* the state of pending I/O queues and (for drivers that touch hardware)
* interrupts, wakeups, DMA, and other hardware state. There may also be
- * internal transitions to various low power modes, which are transparent
+ * internal transitions to various low-power modes which are transparent
* to the rest of the driver stack (such as a driver that's ON gating off
* clocks which are not in active use).
*
- * The externally visible transitions are handled with the help of the following
- * callbacks included in this structure:
- *
- * @prepare: Prepare the device for the upcoming transition, but do NOT change
- * its hardware state. Prevent new children of the device from being
- * registered after @prepare() returns (the driver's subsystem and
- * generally the rest of the kernel is supposed to prevent new calls to the
- * probe method from being made too once @prepare() has succeeded). If
- * @prepare() detects a situation it cannot handle (e.g. registration of a
- * child already in progress), it may return -EAGAIN, so that the PM core
- * can execute it once again (e.g. after the new child has been registered)
- * to recover from the race condition. This method is executed for all
- * kinds of suspend transitions and is followed by one of the suspend
- * callbacks: @suspend(), @freeze(), or @poweroff().
- * The PM core executes @prepare() for all devices before starting to
- * execute suspend callbacks for any of them, so drivers may assume all of
- * the other devices to be present and functional while @prepare() is being
- * executed. In particular, it is safe to make GFP_KERNEL memory
- * allocations from within @prepare(). However, drivers may NOT assume
- * anything about the availability of the user space at that time and it
- * is not correct to request firmware from within @prepare() (it's too
- * late to do that). [To work around this limitation, drivers may
- * register suspend and hibernation notifiers that are executed before the
- * freezing of tasks.]
+ * The externally visible transitions are handled with the help of callbacks
+ * included in this structure in such a way that two levels of callbacks are
+ * involved. First, the PM core executes callbacks provided by PM domains,
+ * device types, classes and bus types. They are the subsystem-level callbacks
+ * supposed to execute callbacks provided by device drivers, although they may
+ * choose not to do that. If the driver callbacks are executed, they have to
+ * collaborate with the subsystem-level callbacks to achieve the goals
+ * appropriate for the given system transition, given transition phase and the
+ * subsystem the device belongs to.
+ *
+ * @prepare: The principal role of this callback is to prevent new children of
+ * the device from being registered after it has returned (the driver's
+ * subsystem and generally the rest of the kernel is supposed to prevent
+ * new calls to the probe method from being made too once @prepare() has
+ * succeeded). If @prepare() detects a situation it cannot handle (e.g.
+ * registration of a child already in progress), it may return -EAGAIN, so
+ * that the PM core can execute it once again (e.g. after a new child has
+ * been registered) to recover from the race condition.
+ * This method is executed for all kinds of suspend transitions and is
+ * followed by one of the suspend callbacks: @suspend(), @freeze(), or
+ * @poweroff(). The PM core executes subsystem-level @prepare() for all
+ * devices before starting to invoke suspend callbacks for any of them, so
+ * generally devices may be assumed to be functional or to respond to
+ * runtime resume requests while @prepare() is being executed. However,
+ * device drivers may NOT assume anything about the availability of user
+ * space at that time and it is NOT valid to request firmware from within
+ * @prepare() (it's too late to do that). It also is NOT valid to allocate
+ * substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
+ * [To work around these limitations, drivers may register suspend and
+ * hibernation notifiers to be executed before the freezing of tasks.]
*
* @complete: Undo the changes made by @prepare(). This method is executed for
* all kinds of resume transitions, following one of the resume callbacks:
* @resume(), @thaw(), @restore(). Also called if the state transition
- * fails before the driver's suspend callback (@suspend(), @freeze(),
- * @poweroff()) can be executed (e.g. if the suspend callback fails for one
+ * fails before the driver's suspend callback: @suspend(), @freeze() or
+ * @poweroff(), can be executed (e.g. if the suspend callback fails for one
* of the other devices that the PM core has unsuccessfully attempted to
* suspend earlier).
- * The PM core executes @complete() after it has executed the appropriate
- * resume callback for all devices.
+ * The PM core executes subsystem-level @complete() after it has executed
+ * the appropriate resume callbacks for all devices.
*
* @suspend: Executed before putting the system into a sleep state in which the
- * contents of main memory are preserved. Quiesce the device, put it into
- * a low power state appropriate for the upcoming system state (such as
- * PCI_D3hot), and enable wakeup events as appropriate.
+ * contents of main memory are preserved. The exact action to perform
+ * depends on the device's subsystem (PM domain, device type, class or bus
+ * type), but generally the device must be quiescent after subsystem-level
+ * @suspend() has returned, so that it doesn't do any I/O or DMA.
+ * Subsystem-level @suspend() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @resume: Executed after waking the system up from a sleep state in which the
- * contents of main memory were preserved. Put the device into the
- * appropriate state, according to the information saved in memory by the
- * preceding @suspend(). The driver starts working again, responding to
- * hardware events and software requests. The hardware may have gone
- * through a power-off reset, or it may have maintained state from the
- * previous suspend() which the driver may rely on while resuming. On most
- * platforms, there are no restrictions on availability of resources like
- * clocks during @resume().
+ * contents of main memory were preserved. The exact action to perform
+ * depends on the device's subsystem, but generally the driver is expected
+ * to start working again, responding to hardware events and software
+ * requests (the device itself may be left in a low-power state, waiting
+ * for a runtime resume to occur). The state of the device at the time its
+ * driver's @resume() callback is run depends on the platform and subsystem
+ * the device belongs to. On most platforms, there are no restrictions on
+ * availability of resources like clocks during @resume().
+ * Subsystem-level @resume() is executed for all devices after invoking
+ * subsystem-level @resume_noirq() for all of them.
*
* @freeze: Hibernation-specific, executed before creating a hibernation image.
- * Quiesce operations so that a consistent image can be created, but do NOT
- * otherwise put the device into a low power device state and do NOT emit
- * system wakeup events. Save in main memory the device settings to be
- * used by @restore() during the subsequent resume from hibernation or by
- * the subsequent @thaw(), if the creation of the image or the restoration
- * of main memory contents from it fails.
+ * Analogous to @suspend(), but it should not enable the device to signal
+ * wakeup events or change its power state. The majority of subsystems
+ * (with the notable exception of the PCI bus type) expect the driver-level
+ * @freeze() to save the device settings in memory to be used by @restore()
+ * during the subsequent resume from hibernation.
+ * Subsystem-level @freeze() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @thaw: Hibernation-specific, executed after creating a hibernation image OR
- * if the creation of the image fails. Also executed after a failing
+ * if the creation of an image has failed. Also executed after a failing
* attempt to restore the contents of main memory from such an image.
* Undo the changes made by the preceding @freeze(), so the device can be
* operated in the same way as immediately before the call to @freeze().
+ * Subsystem-level @thaw() is executed for all devices after invoking
+ * subsystem-level @thaw_noirq() for all of them. It also may be executed
+ * directly after @freeze() in case of a transition error.
*
* @poweroff: Hibernation-specific, executed after saving a hibernation image.
- * Quiesce the device, put it into a low power state appropriate for the
- * upcoming system state (such as PCI_D3hot), and enable wakeup events as
- * appropriate.
+ * Analogous to @suspend(), but it need not save the device's settings in
+ * memory.
+ * Subsystem-level @poweroff() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
*
* @restore: Hibernation-specific, executed after restoring the contents of main
- * memory from a hibernation image. Driver starts working again,
- * responding to hardware events and software requests. Drivers may NOT
- * make ANY assumptions about the hardware state right prior to @restore().
- * On most platforms, there are no restrictions on availability of
- * resources like clocks during @restore().
- *
- * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
- * actions required for suspending the device that need interrupts to be
- * disabled
- *
- * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
- * actions required for resuming the device that need interrupts to be
- * disabled
- *
- * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
- * actions required for freezing the device that need interrupts to be
- * disabled
- *
- * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
- * actions required for thawing the device that need interrupts to be
- * disabled
- *
- * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
- * actions required for handling the device that need interrupts to be
- * disabled
- *
- * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
- * actions required for restoring the operations of the device that need
- * interrupts to be disabled
+ * memory from a hibernation image, analogous to @resume().
+ *
+ * @suspend_noirq: Complete the actions started by @suspend(). Carry out any
+ * additional operations required for suspending the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @suspend_noirq() is being executed.
+ * It generally is expected that the device will be in a low-power state
+ * (appropriate for the target system sleep state) after subsystem-level
+ * @suspend_noirq() has returned successfully. If the device can generate
+ * system wakeup signals and is enabled to wake up the system, it should be
+ * configured to do so at that time. However, depending on the platform
+ * and device's subsystem, @suspend() may be allowed to put the device into
+ * the low-power state and configure it to generate wakeup signals, in
+ * which case it generally is not necessary to define @suspend_noirq().
+ *
+ * @resume_noirq: Prepare for the execution of @resume() by carrying out any
+ * operations required for resuming the device that might be racing with
+ * its driver's interrupt handler, which is guaranteed not to run while
+ * @resume_noirq() is being executed.
+ *
+ * @freeze_noirq: Complete the actions started by @freeze(). Carry out any
+ * additional operations required for freezing the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @freeze_noirq() is being executed.
+ * The power state of the device should not be changed by either @freeze()
+ * or @freeze_noirq() and it should not be configured to signal system
+ * wakeup by any of these callbacks.
+ *
+ * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @thaw_noirq() is being executed.
+ *
+ * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to
+ * @suspend_noirq(), but it need not save the device's settings in memory.
+ *
+ * @restore_noirq: Prepare for the execution of @restore() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @restore_noirq() is being executed. Analogous to @resume_noirq().
*
* All of the above callbacks, except for @complete(), return error codes.
* However, the error codes returned by the resume operations, @resume(),
- * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do
+ * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
* not cause the PM core to abort the resume transition during which they are
- * returned. The error codes returned in that cases are only printed by the PM
+ * returned. The error codes returned in those cases are only printed by the PM
* core to the system logs for debugging purposes. Still, it is recommended
* that drivers only return error codes from their resume methods in case of an
* unrecoverable failure (i.e. when the device being handled refuses to resume
@@ -174,31 +201,43 @@ typedef struct pm_message {
* their children.
*
* It is allowed to unregister devices while the above callbacks are being
- * executed. However, it is not allowed to unregister a device from within any
- * of its own callbacks.
+ * executed. However, a callback routine must NOT try to unregister the device
+ * it was called for, although it may unregister children of that device (for
+ * example, if it detects that a child was unplugged while the system was
+ * asleep).
+ *
+ * Refer to Documentation/power/devices.txt for more information about the role
+ * of the above callbacks in the system suspend process.
*
- * There also are the following callbacks related to run-time power management
- * of devices:
+ * There also are callbacks related to runtime power management of devices.
+ * Again, these callbacks are executed by the PM core only for subsystems
+ * (PM domains, device types, classes and bus types) and the subsystem-level
+ * callbacks are supposed to invoke the driver callbacks. Moreover, the exact
+ * actions to be performed by a device driver's callbacks generally depend on
+ * the platform and subsystem the device belongs to.
*
* @runtime_suspend: Prepare the device for a condition in which it won't be
* able to communicate with the CPU(s) and RAM due to power management.
- * This need not mean that the device should be put into a low power state.
+ * This need not mean that the device should be put into a low-power state.
* For example, if the device is behind a link which is about to be turned
* off, the device may remain at full power. If the device does go to low
- * power and is capable of generating run-time wake-up events, remote
- * wake-up (i.e., a hardware mechanism allowing the device to request a
- * change of its power state via a wake-up event, such as PCI PME) should
- * be enabled for it.
+ * power and is capable of generating runtime wakeup events, remote wakeup
+ * (i.e., a hardware mechanism allowing the device to request a change of
+ * its power state via an interrupt) should be enabled for it.
*
* @runtime_resume: Put the device into the fully active state in response to a
- * wake-up event generated by hardware or at the request of software. If
- * necessary, put the device into the full power state and restore its
+ * wakeup event generated by hardware or at the request of software. If
+ * necessary, put the device into the full-power state and restore its
* registers, so that it is fully operational.
*
- * @runtime_idle: Device appears to be inactive and it might be put into a low
- * power state if all of the necessary conditions are satisfied. Check
+ * @runtime_idle: Device appears to be inactive and it might be put into a
+ * low-power state if all of the necessary conditions are satisfied. Check
* these conditions and handle the device as appropriate, possibly queueing
* a suspend request for it. The return value is ignored by the PM core.
+ *
+ * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * role of the above callbacks in device runtime power management.
+ *
*/
struct dev_pm_ops {
@@ -447,6 +486,7 @@ struct dev_pm_info {
unsigned int async_suspend:1;
bool is_prepared:1; /* Owned by the PM core */
bool is_suspended:1; /* Ditto */
+ bool ignore_children:1;
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
@@ -464,7 +504,6 @@ struct dev_pm_info {
atomic_t usage_count;
atomic_t child_count;
unsigned int disable_depth:3;
- unsigned int ignore_children:1;
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index d8d90361964..d3085e72a0e 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -52,11 +52,6 @@ static inline bool pm_children_suspended(struct device *dev)
|| !atomic_read(&dev->power.child_count);
}
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
- dev->power.ignore_children = enable;
-}
-
static inline void pm_runtime_get_noresume(struct device *dev)
{
atomic_inc(&dev->power.usage_count);
@@ -130,7 +125,6 @@ static inline void pm_runtime_allow(struct device *dev) {}
static inline void pm_runtime_forbid(struct device *dev) {}
static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
static inline void pm_runtime_get_noresume(struct device *dev) {}
static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index ea567321ae3..2ca8cde5459 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -35,10 +35,12 @@ struct pstore_info {
spinlock_t buf_lock; /* serialize access to 'buf' */
char *buf;
size_t bufsize;
+ struct mutex read_mutex; /* serialize open/read/close */
int (*open)(struct pstore_info *psi);
int (*close)(struct pstore_info *psi);
ssize_t (*read)(u64 *id, enum pstore_type_id *type,
- struct timespec *time, struct pstore_info *psi);
+ struct timespec *time, char **buf,
+ struct pstore_info *psi);
int (*write)(enum pstore_type_id type, u64 *id,
unsigned int part, size_t size, struct pstore_info *psi);
int (*erase)(enum pstore_type_id type, u64 id,
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 68daf4f27e2..1c4f3e9b9bc 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1521,7 +1521,6 @@ struct task_struct {
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
#endif
- struct prop_local_single dirties;
/*
* when (nr_dirtied >= nr_dirtied_pause), it's time to call
* balance_dirty_pages() for some dirty throttling pause
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 97ff8e27a6c..3d86517fe7d 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -207,13 +207,15 @@ struct serial_icounter_struct {
struct serial_rs485 {
__u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0)
-#define SER_RS485_RTS_ON_SEND (1 << 1)
-#define SER_RS485_RTS_AFTER_SEND (1 << 2)
-#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
+#define SER_RS485_ENABLED (1 << 0) /* If enabled */
+#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
+ RTS pin when
+ sending */
+#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
+ RTS pin after sent*/
#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Milliseconds */
- __u32 delay_rts_after_send; /* Milliseconds */
+ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
+ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
__u32 padding[5]; /* Memory is cheap, new structs
are a royal PITA .. */
};
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0efa1f10bc2..369273a5267 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -67,6 +67,7 @@ enum {
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
+ SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf18648d0..a20831cf336 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,7 +52,6 @@ struct clk {
unsigned long arch_flags;
void *priv;
- struct dentry *dentry;
struct clk_mapping *mapping;
struct cpufreq_frequency_table *freq_table;
unsigned int nr_freqs;
@@ -94,6 +93,9 @@ int clk_rate_table_find(struct clk *clk,
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate);
+
long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index bc8c9208f7e..8446789216e 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,4 +104,80 @@ struct pinmux_info {
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+ PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \
+ PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \
+ PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \
+ PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+ PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx), \
+ PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx), \
+ PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx), \
+ PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx), \
+ PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL() CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
#endif /* __SH_PFC_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index add4790b21f..e9e72bda1b7 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -85,6 +85,8 @@
* @reset: reset the device
* vdev: the virtio device
* After this, status and feature negotiation must be done again
+ * Device must not be reset from its vq/config callbacks, or in
+ * parallel with being added/removed.
* @find_vqs: find virtqueues and instantiate them.
* vdev: the virtio_device
* nvqs: the number of virtqueues to find
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
index 27c7edefbc8..5c7b6f0daef 100644
--- a/include/linux/virtio_mmio.h
+++ b/include/linux/virtio_mmio.h
@@ -63,7 +63,7 @@
#define VIRTIO_MMIO_GUEST_FEATURES 0x020
/* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024
+#define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024
/* Guest's memory page size in bytes - Write Only */
#define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 687fb11e201..4bde182fcf9 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -119,7 +119,7 @@ unmap_kernel_range(unsigned long addr, unsigned long size)
#endif
/* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
extern void free_vm_area(struct vm_struct *area);
/* for /dev/kmem */
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index ab90ae0970a..6cc18f37167 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -39,8 +39,11 @@
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LE_DEFAULT_MTU 23
-#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
+#define L2CAP_DISC_TIMEOUT (100)
+#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
/* L2CAP socket address */
struct sockaddr_l2 {
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 92cf1c2c30c..95852e36713 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -456,6 +456,9 @@ enum station_parameters_apply_mask {
* as the AC bitmap in the QoS info field
* @max_sp: max Service Period. same format as the MAX_SP in the
* QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ * (for those that don't have a natural "no change" value),
+ * see &enum station_parameters_apply_mask
*/
struct station_parameters {
u8 *supported_rates;
@@ -615,6 +618,7 @@ struct sta_bss_parameters {
* user space MLME/SME implementation. The information is provided for
* the cfg80211_new_sta() calls to notify user space of the IEs.
* @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
*/
struct station_info {
u32 filled;
diff --git a/include/net/dst.h b/include/net/dst.h
index 4fb6c438179..6faec1a6021 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -205,12 +205,7 @@ dst_feature(const struct dst_entry *dst, u32 feature)
static inline u32 dst_mtu(const struct dst_entry *dst)
{
- u32 mtu = dst_metric_raw(dst, RTAX_MTU);
-
- if (!mtu)
- mtu = dst->ops->default_mtu(dst);
-
- return mtu;
+ return dst->ops->mtu(dst);
}
/* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */
diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
index 9adb99845a5..e1c2ee0eef4 100644
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -17,7 +17,7 @@ struct dst_ops {
int (*gc)(struct dst_ops *ops);
struct dst_entry * (*check)(struct dst_entry *, __u32 cookie);
unsigned int (*default_advmss)(const struct dst_entry *);
- unsigned int (*default_mtu)(const struct dst_entry *);
+ unsigned int (*mtu)(const struct dst_entry *);
u32 * (*cow_metrics)(struct dst_entry *, unsigned long);
void (*destroy)(struct dst_entry *);
void (*ifdown)(struct dst_entry *,
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index b897d6e6d0a..f941964a993 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -31,6 +31,7 @@
/** struct ip_options - IP Options
*
* @faddr - Saved first hop address
+ * @nexthop - Saved nexthop address in LSRR and SSRR
* @is_data - Options in __data, rather than skb
* @is_strictroute - Strict source route
* @srr_is_hit - Packet destination addr was our one
@@ -41,6 +42,7 @@
*/
struct ip_options {
__be32 faddr;
+ __be32 nexthop;
unsigned char optlen;
unsigned char srr;
unsigned char rr;
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index 78c83e62218..e9ff3fc5e68 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -35,6 +35,7 @@ struct inet_peer {
u32 metrics[RTAX_MAX];
u32 rate_tokens; /* rate limiting for ICMP */
+ int redirect_genid;
unsigned long rate_last;
unsigned long pmtu_expires;
u32 pmtu_orig;
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 4283508b3e1..a88fb693938 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -67,18 +67,18 @@ struct nf_ct_event_notifier {
int (*fcn)(unsigned int events, struct nf_ct_event *item);
};
-extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb;
-extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb);
-extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb);
+extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb);
+extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb);
extern void nf_ct_deliver_cached_events(struct nf_conn *ct);
static inline void
nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct)
{
+ struct net *net = nf_ct_net(ct);
struct nf_conntrack_ecache *e;
- if (nf_conntrack_event_cb == NULL)
+ if (net->ct.nf_conntrack_event_cb == NULL)
return;
e = nf_ct_ecache_find(ct);
@@ -95,11 +95,12 @@ nf_conntrack_eventmask_report(unsigned int eventmask,
int report)
{
int ret = 0;
+ struct net *net = nf_ct_net(ct);
struct nf_ct_event_notifier *notify;
struct nf_conntrack_ecache *e;
rcu_read_lock();
- notify = rcu_dereference(nf_conntrack_event_cb);
+ notify = rcu_dereference(net->ct.nf_conntrack_event_cb);
if (notify == NULL)
goto out_unlock;
@@ -164,9 +165,8 @@ struct nf_exp_event_notifier {
int (*fcn)(unsigned int events, struct nf_exp_event *item);
};
-extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb;
-extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb);
-extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb);
+extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb);
+extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb);
static inline void
nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
@@ -174,11 +174,12 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
u32 pid,
int report)
{
+ struct net *net = nf_ct_exp_net(exp);
struct nf_exp_event_notifier *notify;
struct nf_conntrack_ecache *e;
rcu_read_lock();
- notify = rcu_dereference(nf_expect_event_cb);
+ notify = rcu_dereference(net->ct.nf_expect_event_cb);
if (notify == NULL)
goto out_unlock;
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index 0249399e51a..7a911eca0f1 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -18,6 +18,8 @@ struct netns_ct {
struct hlist_nulls_head unconfirmed;
struct hlist_nulls_head dying;
struct ip_conntrack_stat __percpu *stat;
+ struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb;
+ struct nf_exp_event_notifier __rcu *nf_expect_event_cb;
int sysctl_events;
unsigned int sysctl_events_retry_timeout;
int sysctl_acct;
diff --git a/include/net/red.h b/include/net/red.h
index 3319f16b3be..b72a3b83393 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -116,7 +116,7 @@ struct red_parms {
u32 qR; /* Cached random number */
unsigned long qavg; /* Average queue length: A scaled */
- psched_time_t qidlestart; /* Start of current idle period */
+ ktime_t qidlestart; /* Start of current idle period */
};
static inline u32 red_rmask(u8 Plog)
@@ -148,17 +148,17 @@ static inline void red_set_parms(struct red_parms *p,
static inline int red_is_idling(struct red_parms *p)
{
- return p->qidlestart != PSCHED_PASTPERFECT;
+ return p->qidlestart.tv64 != 0;
}
static inline void red_start_of_idle_period(struct red_parms *p)
{
- p->qidlestart = psched_get_time();
+ p->qidlestart = ktime_get();
}
static inline void red_end_of_idle_period(struct red_parms *p)
{
- p->qidlestart = PSCHED_PASTPERFECT;
+ p->qidlestart.tv64 = 0;
}
static inline void red_restart(struct red_parms *p)
@@ -170,13 +170,10 @@ static inline void red_restart(struct red_parms *p)
static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p)
{
- psched_time_t now;
- long us_idle;
+ s64 delta = ktime_us_delta(ktime_get(), p->qidlestart);
+ long us_idle = min_t(s64, delta, p->Scell_max);
int shift;
- now = psched_get_time();
- us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max);
-
/*
* The problem: ideally, average length queue recalcultion should
* be done over constant clock intervals. This is too expensive, so
diff --git a/include/net/route.h b/include/net/route.h
index db7b3432f07..91855d185b5 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -71,12 +71,12 @@ struct rtable {
struct fib_info *fi; /* for client ref to shared metrics */
};
-static inline bool rt_is_input_route(struct rtable *rt)
+static inline bool rt_is_input_route(const struct rtable *rt)
{
return rt->rt_route_iif != 0;
}
-static inline bool rt_is_output_route(struct rtable *rt)
+static inline bool rt_is_output_route(const struct rtable *rt)
{
return rt->rt_route_iif == 0;
}
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index b66ebb2032c..378c7ed6760 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -307,15 +307,8 @@ struct omap_dss_board_info {
void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
};
-#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
/* Init with the board info */
extern int omap_display_init(struct omap_dss_board_info *board_data);
-#else
-static inline int omap_display_init(struct omap_dss_board_info *board_data)
-{
- return 0;
-}
-#endif
struct omap_display_platform_data {
struct omap_dss_board_info *board_data;
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
index a785a3b0c8c..438c256c274 100644
--- a/include/xen/platform_pci.h
+++ b/include/xen/platform_pci.h
@@ -29,8 +29,7 @@
static inline int xen_must_unplug_nics(void) {
#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;
@@ -40,8 +39,7 @@ static inline int xen_must_unplug_nics(void) {
static inline int xen_must_unplug_disks(void) {
#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;