diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/videodev2.h | 27 | ||||
| -rw-r--r-- | include/media/ov772x.h | 26 | ||||
| -rw-r--r-- | include/media/s5k6aa.h | 51 | ||||
| -rw-r--r-- | include/media/soc_camera.h | 104 | ||||
| -rw-r--r-- | include/media/soc_camera_platform.h | 4 | ||||
| -rw-r--r-- | include/media/soc_mediabus.h | 2 | ||||
| -rw-r--r-- | include/media/v4l2-ioctl.h | 2 | ||||
| -rw-r--r-- | include/media/v4l2-subdev.h | 5 | ||||
| -rw-r--r-- | include/media/videobuf2-core.h | 50 |
9 files changed, 166 insertions, 105 deletions
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 225560c1a10..4b752d5ee80 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -653,6 +653,10 @@ struct v4l2_buffer { #define V4L2_BUF_FLAG_ERROR 0x0040 #define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ #define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */ +#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ +/* Cache handling flags */ +#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 +#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 /* * O V E R L A Y P R E V I E W @@ -1165,6 +1169,7 @@ enum v4l2_power_line_frequency { V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1, V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO = 3, }; #define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25) #define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26) @@ -2138,6 +2143,23 @@ struct v4l2_dbg_chip_ident { __u32 revision; /* chip revision, chip specific */ } __attribute__ ((packed)); +/** + * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument + * @index: on return, index of the first created buffer + * @count: entry: number of requested buffers, + * return: number of created buffers + * @memory: buffer memory type + * @format: frame format, for which buffers are requested + * @reserved: future extensions + */ +struct v4l2_create_buffers { + __u32 index; + __u32 count; + enum v4l2_memory memory; + struct v4l2_format format; + __u32 reserved[8]; +}; + /* * I O C T L C O D E S F O R V I D E O D E V I C E S * @@ -2228,6 +2250,11 @@ struct v4l2_dbg_chip_ident { #define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription) #define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription) +/* Experimental, the below two ioctls may change over the next couple of kernel + versions */ +#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) +#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/include/media/ov772x.h b/include/media/ov772x.h index 548bf1155c8..00dbb7c4fea 100644 --- a/include/media/ov772x.h +++ b/include/media/ov772x.h @@ -12,12 +12,9 @@ #ifndef __OV772X_H__ #define __OV772X_H__ -#include <media/soc_camera.h> - /* for flags */ #define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */ #define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */ -#define OV772X_FLAG_8BIT (1 << 2) /* default 10 bit */ /* * for Edge ctrl @@ -32,22 +29,23 @@ struct ov772x_edge_ctrl { unsigned char lower; }; -#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ -#define EDGE_STRENGTH_MASK 0x1F -#define EDGE_THRESHOLD_MASK 0x0F -#define EDGE_UPPER_MASK 0xFF -#define EDGE_LOWER_MASK 0xFF +#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ +#define OV772X_EDGE_STRENGTH_MASK 0x1F +#define OV772X_EDGE_THRESHOLD_MASK 0x0F +#define OV772X_EDGE_UPPER_MASK 0xFF +#define OV772X_EDGE_LOWER_MASK 0xFF #define OV772X_AUTO_EDGECTRL(u, l) \ { \ - .upper = (u & EDGE_UPPER_MASK), \ - .lower = (l & EDGE_LOWER_MASK), \ + .upper = (u & OV772X_EDGE_UPPER_MASK), \ + .lower = (l & OV772X_EDGE_LOWER_MASK), \ } -#define OV772X_MANUAL_EDGECTRL(s, t) \ -{ \ - .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\ - .threshold = (t & EDGE_THRESHOLD_MASK), \ +#define OV772X_MANUAL_EDGECTRL(s, t) \ +{ \ + .strength = (s & OV772X_EDGE_STRENGTH_MASK) | \ + OV772X_MANUAL_EDGE_CTRL, \ + .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \ } /* diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h new file mode 100644 index 00000000000..ba34f7055e5 --- /dev/null +++ b/include/media/s5k6aa.h @@ -0,0 +1,51 @@ +/* + * S5K6AAFX camera sensor driver header + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5K6AA_H +#define S5K6AA_H + +#include <media/v4l2-mediabus.h> + +/** + * struct s5k6aa_gpio - data structure describing a GPIO + * @gpio: GPIO number + * @level: indicates active state of the @gpio + */ +struct s5k6aa_gpio { + int gpio; + int level; +}; + +/** + * struct s5k6aa_platform_data - s5k6aa driver platform data + * @set_power: an additional callback to the board code, called + * after enabling the regulators and before switching + * the sensor off + * @mclk_frequency: sensor's master clock frequency in Hz + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby: GPIO driving STBY pin + * @nlanes: maximum number of MIPI-CSI lanes used + * @horiz_flip: default horizontal image flip value, non zero to enable + * @vert_flip: default vertical image flip value, non zero to enable + */ + +struct s5k6aa_platform_data { + int (*set_power)(int enable); + unsigned long mclk_frequency; + struct s5k6aa_gpio gpio_reset; + struct s5k6aa_gpio gpio_stby; + enum v4l2_mbus_type bus_type; + u8 nlanes; + u8 horiz_flip; + u8 vert_flip; +}; + +#endif /* S5K6AA_H */ diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 7582952dcea..b1377b931eb 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -12,12 +12,14 @@ #ifndef SOC_CAMERA_H #define SOC_CAMERA_H +#include <linux/bitops.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/pm.h> #include <linux/videodev2.h> #include <media/videobuf-core.h> #include <media/videobuf2-core.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> struct file; @@ -37,8 +39,8 @@ struct soc_camera_device { unsigned char iface; /* Host number */ unsigned char devnum; /* Device number per host */ struct soc_camera_sense *sense; /* See comment in struct definition */ - struct soc_camera_ops *ops; struct video_device *vdev; + struct v4l2_ctrl_handler ctrl_handler; const struct soc_camera_format_xlate *current_fmt; struct soc_camera_format_xlate *user_formats; int num_user_formats; @@ -93,14 +95,10 @@ struct soc_camera_host_ops { int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *); int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); int (*set_bus_param)(struct soc_camera_device *, __u32); - int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *); - int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *); int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *); unsigned int (*poll)(struct file *, poll_table *); - const struct v4l2_queryctrl *controls; - int num_controls; }; #define SOCAM_SENSOR_INVERT_PCLK (1 << 0) @@ -193,13 +191,6 @@ struct soc_camera_format_xlate { const struct soc_mbus_pixelfmt *host_fmt; }; -struct soc_camera_ops { - unsigned long (*query_bus_param)(struct soc_camera_device *); - int (*set_bus_param)(struct soc_camera_device *, unsigned long); - const struct v4l2_queryctrl *controls; - int num_controls; -}; - #define SOCAM_SENSE_PCLK_CHANGED (1 << 0) /** @@ -226,65 +217,18 @@ struct soc_camera_sense { unsigned long pixel_clock; }; -static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( - struct soc_camera_ops *ops, int id) -{ - int i; - - for (i = 0; i < ops->num_controls; i++) - if (ops->controls[i].id == id) - return &ops->controls[i]; - - return NULL; -} - -#define SOCAM_MASTER (1 << 0) -#define SOCAM_SLAVE (1 << 1) -#define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2) -#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3) -#define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4) -#define SOCAM_VSYNC_ACTIVE_LOW (1 << 5) -#define SOCAM_DATAWIDTH_4 (1 << 6) -#define SOCAM_DATAWIDTH_8 (1 << 7) -#define SOCAM_DATAWIDTH_9 (1 << 8) -#define SOCAM_DATAWIDTH_10 (1 << 9) -#define SOCAM_DATAWIDTH_15 (1 << 10) -#define SOCAM_DATAWIDTH_16 (1 << 11) -#define SOCAM_PCLK_SAMPLE_RISING (1 << 12) -#define SOCAM_PCLK_SAMPLE_FALLING (1 << 13) -#define SOCAM_DATA_ACTIVE_HIGH (1 << 14) -#define SOCAM_DATA_ACTIVE_LOW (1 << 15) -#define SOCAM_MIPI_1LANE (1 << 16) -#define SOCAM_MIPI_2LANE (1 << 17) -#define SOCAM_MIPI_3LANE (1 << 18) -#define SOCAM_MIPI_4LANE (1 << 19) -#define SOCAM_MIPI (SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \ - SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE) +#define SOCAM_DATAWIDTH(x) BIT((x) - 1) +#define SOCAM_DATAWIDTH_4 SOCAM_DATAWIDTH(4) +#define SOCAM_DATAWIDTH_8 SOCAM_DATAWIDTH(8) +#define SOCAM_DATAWIDTH_9 SOCAM_DATAWIDTH(9) +#define SOCAM_DATAWIDTH_10 SOCAM_DATAWIDTH(10) +#define SOCAM_DATAWIDTH_15 SOCAM_DATAWIDTH(15) +#define SOCAM_DATAWIDTH_16 SOCAM_DATAWIDTH(16) #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \ SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \ SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16) -static inline unsigned long soc_camera_bus_param_compatible( - unsigned long camera_flags, unsigned long bus_flags) -{ - unsigned long common_flags, hsync, vsync, pclk, data, buswidth, mode; - unsigned long mipi; - - common_flags = camera_flags & bus_flags; - - hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW); - vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW); - pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING); - data = common_flags & (SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW); - mode = common_flags & (SOCAM_MASTER | SOCAM_SLAVE); - buswidth = common_flags & SOCAM_DATAWIDTH_MASK; - mipi = common_flags & SOCAM_MIPI; - - return ((!hsync || !vsync || !pclk || !data || !mode || !buswidth) && !mipi) ? 0 : - common_flags; -} - static inline void soc_camera_limit_side(int *start, int *length, unsigned int start_min, unsigned int length_min, unsigned int length_max) @@ -300,23 +244,37 @@ static inline void soc_camera_limit_side(int *start, int *length, *start = start_min + length_max - *length; } -extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl, - unsigned long flags); +unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl, + unsigned long flags); +unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl, + const struct v4l2_mbus_config *cfg); /* This is only temporary here - until v4l2-subdev begins to link to video_device */ #include <linux/i2c.h> -static inline struct video_device *soc_camera_i2c_to_vdev(struct i2c_client *client) +static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + return icd ? icd->vdev : NULL; +} + +static inline struct soc_camera_link *soc_camera_i2c_to_link(const struct i2c_client *client) +{ + return client->dev.platform_data; +} + +static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(const struct video_device *vdev) { - struct soc_camera_device *icd = client->dev.platform_data; - return icd->vdev; + struct soc_camera_device *icd = dev_get_drvdata(vdev->parent); + return soc_camera_to_subdev(icd); } -static inline struct soc_camera_device *soc_camera_from_vb2q(struct vb2_queue *vq) +static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq) { return container_of(vq, struct soc_camera_device, vb2_vidq); } -static inline struct soc_camera_device *soc_camera_from_vbq(struct videobuf_queue *vq) +static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq) { return container_of(vq, struct soc_camera_device, vb_vidq); } diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h index 74f0fa15ca4..8aa4200a0b1 100644 --- a/include/media/soc_camera_platform.h +++ b/include/media/soc_camera_platform.h @@ -13,6 +13,7 @@ #include <linux/videodev2.h> #include <media/soc_camera.h> +#include <media/v4l2-mediabus.h> struct device; @@ -20,7 +21,8 @@ struct soc_camera_platform_info { const char *format_name; unsigned long format_depth; struct v4l2_mbus_framefmt format; - unsigned long bus_param; + unsigned long mbus_param; + enum v4l2_mbus_type mbus_type; struct soc_camera_device *icd; int (*set_capture)(struct soc_camera_platform_info *info, int enable); }; diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h index fae432544b4..73f1e7eb60f 100644 --- a/include/media/soc_mediabus.h +++ b/include/media/soc_mediabus.h @@ -82,5 +82,7 @@ const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc( s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf); int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf, unsigned int *numerator, unsigned int *denominator); +unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg, + unsigned int flags); #endif diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index dd9f1e7b8ff..4d1c74ad4c8 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -122,6 +122,8 @@ struct v4l2_ioctl_ops { int (*vidioc_qbuf) (struct file *file, void *fh, struct v4l2_buffer *b); int (*vidioc_dqbuf) (struct file *file, void *fh, struct v4l2_buffer *b); + int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b); + int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b); int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i); int (*vidioc_g_fbuf) (struct file *file, void *fh, diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 257da1a30f6..f0f3358d1b1 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -158,6 +158,7 @@ struct v4l2_subdev_core_ops { int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); + int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm); int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -534,13 +535,13 @@ struct v4l2_subdev { void *dev_priv; void *host_priv; /* subdev device node */ - struct video_device devnode; + struct video_device *devnode; }; #define media_entity_to_v4l2_subdev(ent) \ container_of(ent, struct v4l2_subdev, entity) #define vdev_to_v4l2_subdev(vdev) \ - container_of(vdev, struct v4l2_subdev, devnode) + video_get_drvdata(vdev) /* * Used for storing subdev information per file handle diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index ea55c08eddf..a15d1f1b319 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -105,6 +105,7 @@ enum vb2_fileio_flags { /** * enum vb2_buffer_state - current video buffer state * @VB2_BUF_STATE_DEQUEUED: buffer under userspace control + * @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver * @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver * @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used * in a hardware operation @@ -116,6 +117,7 @@ enum vb2_fileio_flags { */ enum vb2_buffer_state { VB2_BUF_STATE_DEQUEUED, + VB2_BUF_STATE_PREPARED, VB2_BUF_STATE_QUEUED, VB2_BUF_STATE_ACTIVE, VB2_BUF_STATE_DONE, @@ -167,13 +169,21 @@ struct vb2_buffer { /** * struct vb2_ops - driver-specific callbacks * - * @queue_setup: called from a VIDIOC_REQBUFS handler, before - * memory allocation; driver should return the required - * number of buffers in num_buffers, the required number - * of planes per buffer in num_planes; the size of each - * plane should be set in the sizes[] array and optional - * per-plane allocator specific context in alloc_ctxs[] - * array + * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS + * handlers before memory allocation, or, if + * *num_planes != 0, after the allocation to verify a + * smaller number of buffers. Driver should return + * the required number of buffers in *num_buffers, the + * required number of planes per buffer in *num_planes; the + * size of each plane should be set in the sizes[] array + * and optional per-plane allocator specific context in the + * alloc_ctxs[] array. When called from VIDIOC_REQBUFS, + * fmt == NULL, the driver has to use the currently + * configured format and *num_buffers is the total number + * of buffers, that are being allocated. When called from + * VIDIOC_CREATE_BUFS, fmt != NULL and it describes the + * target frame format. In this case *num_buffers are being + * allocated additionally to q->num_buffers. * @wait_prepare: release any locks taken while calling vb2 functions; * it is called before an ioctl needs to wait for a new * buffer to arrive; required to avoid a deadlock in @@ -186,11 +196,11 @@ struct vb2_buffer { * perform additional buffer-related initialization; * initialization failure (return != 0) will prevent * queue setup from completing successfully; optional - * @buf_prepare: called every time the buffer is queued from userspace; - * drivers may perform any initialization required before - * each hardware operation in this callback; - * if an error is returned, the buffer will not be queued - * in driver; optional + * @buf_prepare: called every time the buffer is queued from userspace + * and from the VIDIOC_PREPARE_BUF ioctl; drivers may + * perform any initialization required before each hardware + * operation in this callback; if an error is returned, the + * buffer will not be queued in driver; optional * @buf_finish: called before every dequeue of the buffer back to * userspace; drivers may perform any operations required * before userspace accesses the buffer; optional @@ -216,9 +226,9 @@ struct vb2_buffer { * pre-queued buffers before calling STREAMON */ struct vb2_ops { - int (*queue_setup)(struct vb2_queue *q, unsigned int *num_buffers, - unsigned int *num_planes, unsigned int sizes[], - void *alloc_ctxs[]); + int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]); void (*wait_prepare)(struct vb2_queue *q); void (*wait_finish)(struct vb2_queue *q); @@ -298,6 +308,9 @@ int vb2_wait_for_all_buffers(struct vb2_queue *q); int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b); int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req); +int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create); +int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b); + int vb2_queue_init(struct vb2_queue *q); void vb2_queue_release(struct vb2_queue *q); @@ -309,6 +322,13 @@ int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type); int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type); int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma); +#ifndef CONFIG_MMU +unsigned long vb2_get_unmapped_area(struct vb2_queue *q, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags); +#endif unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait); size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, loff_t *ppos, int nonblock); |