summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/i2c/twl.h2
-rw-r--r--include/linux/mfd/88pm860x.h23
-rw-r--r--include/linux/mfd/abx500.h7
-rw-r--r--include/linux/mfd/abx500/ab8500-gpio.h4
-rw-r--r--include/linux/mfd/abx500/ab8500-sysctrl.h43
-rw-r--r--include/linux/mfd/abx500/ab8500.h208
-rw-r--r--include/linux/mfd/anatop.h40
-rw-r--r--include/linux/mfd/da9052/da9052.h2
-rw-r--r--include/linux/mfd/db8500-prcmu.h183
-rw-r--r--include/linux/mfd/dbx500-prcmu.h414
-rw-r--r--include/linux/mfd/mc13xxx.h16
-rw-r--r--include/linux/mfd/rc5t583.h295
-rw-r--r--include/linux/mfd/stmpe.h1
-rw-r--r--include/linux/mfd/tps65090.h46
-rw-r--r--include/linux/mfd/tps65217.h283
-rw-r--r--include/linux/mfd/tps65910.h3
-rw-r--r--include/linux/mfd/wm8994/pdata.h1
-rw-r--r--include/linux/regulator/ab8500.h70
18 files changed, 1480 insertions, 161 deletions
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7fcab23c59c..2463b610033 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -761,7 +761,7 @@ struct twl_regulator_driver_data {
/*----------------------------------------------------------------------*/
-int twl4030_sih_setup(int module);
+int twl4030_sih_setup(struct device *dev, int module, int irq_base);
/* Offsets to Power Registers */
#define TWL4030_VDAC_DEV_GRP 0x3B
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 92be3476c9f..84d071ade1d 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -263,6 +263,22 @@ enum {
#define PM8607_PD_PREBIAS_MASK (0x1F << 0)
#define PM8607_PD_PRECHG_MASK (7 << 5)
+#define PM8606_REF_GP_OSC_OFF 0
+#define PM8606_REF_GP_OSC_ON 1
+#define PM8606_REF_GP_OSC_UNKNOWN 2
+
+/* Clients of reference group and 8MHz oscillator in 88PM8606 */
+enum pm8606_ref_gp_and_osc_clients {
+ REF_GP_NO_CLIENTS = 0,
+ WLED1_DUTY = (1<<0), /*PF 0x02.7:0*/
+ WLED2_DUTY = (1<<1), /*PF 0x04.7:0*/
+ WLED3_DUTY = (1<<2), /*PF 0x06.7:0*/
+ RGB1_ENABLE = (1<<3), /*PF 0x07.1*/
+ RGB2_ENABLE = (1<<4), /*PF 0x07.2*/
+ LDO_VBR_EN = (1<<5), /*PF 0x12.0*/
+ REF_GP_MAX_CLIENT = 0xFFFF
+};
+
/* Interrupt Number in 88PM8607 */
enum {
PM8607_IRQ_ONKEY,
@@ -298,6 +314,7 @@ enum {
struct pm860x_chip {
struct device *dev;
struct mutex irq_lock;
+ struct mutex osc_lock;
struct i2c_client *client;
struct i2c_client *companion; /* companion chip client */
struct regmap *regmap;
@@ -305,12 +322,15 @@ struct pm860x_chip {
int buck3_double; /* DVC ramp slope double */
unsigned short companion_addr;
+ unsigned short osc_vote;
int id;
int irq_mode;
int irq_base;
int core_irq;
unsigned char chip_version;
+ unsigned char osc_status;
+ unsigned int wakeup_flag;
};
enum {
@@ -369,6 +389,9 @@ struct pm860x_platform_data {
int num_regulators;
};
+extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short);
+extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short);
+
extern int pm860x_reg_read(struct i2c_client *, int);
extern int pm860x_reg_write(struct i2c_client *, int, unsigned char);
extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e20dd6ead1d..5fa697477b7 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -34,13 +34,6 @@ struct device;
#define AB5500_1_1 0x21
#define AB5500_2_0 0x24
-/* AB8500 CIDs*/
-#define AB8500_CUT1P0 0x10
-#define AB8500_CUT1P1 0x11
-#define AB8500_CUT2P0 0x20
-#define AB8500_CUT3P0 0x30
-#define AB8500_CUT3P3 0x33
-
/*
* AB3100, EVENTA1, A2 and A3 event register flags
* these are catenated into a single 32-bit flag in the code
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
index 488a8c920a2..2387c207ea8 100644
--- a/include/linux/mfd/abx500/ab8500-gpio.h
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -10,12 +10,14 @@
/*
* Platform data to register a block: only the initial gpio/irq number.
+ * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
+ * registers.
*/
struct ab8500_gpio_platform_data {
int gpio_base;
u32 irq_base;
- u8 config_reg[7];
+ u8 config_reg[8];
};
#endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 10da0291f8f..10eb50973c3 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
#define AB8500_SWATCTRL 0x230
#define AB8500_HIQCLKCTRL 0x232
#define AB8500_VSIMSYSCLKCTRL 0x233
+#define AB9540_SYSCLK12BUFCTRL 0x234
+#define AB9540_SYSCLK12CONFCTRL 0x235
+#define AB9540_SYSCLK12BUFCTRL2 0x236
+#define AB9540_SYSCLK12BUF1VALID 0x237
+#define AB9540_SYSCLK12BUF2VALID 0x238
+#define AB9540_SYSCLK12BUF3VALID 0x239
+#define AB9540_SYSCLK12BUF4VALID 0x23A
/* Bits */
#define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
@@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
+
+#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
+
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
+
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+
#endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index dca94396190..fccc3002f27 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -12,6 +12,29 @@
struct device;
/*
+ * AB IC versions
+ *
+ * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
+ * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
+ * print of version string.
+ */
+enum ab8500_version {
+ AB8500_VERSION_AB8500 = 0x0,
+ AB8500_VERSION_AB8505 = 0x1,
+ AB8500_VERSION_AB9540 = 0x2,
+ AB8500_VERSION_AB8540 = 0x3,
+ AB8500_VERSION_UNDEFINED,
+};
+
+/* AB8500 CIDs*/
+#define AB8500_CUTEARLY 0x00
+#define AB8500_CUT1P0 0x10
+#define AB8500_CUT1P1 0x11
+#define AB8500_CUT2P0 0x20
+#define AB8500_CUT3P0 0x30
+#define AB8500_CUT3P3 0x33
+
+/*
* AB8500 bank addresses
*/
#define AB8500_SYS_CTRL1_BLOCK 0x1
@@ -37,30 +60,34 @@ struct device;
/*
* Interrupts
+ * Values used to index into array ab8500_irq_regoffset[] defined in
+ * drivers/mdf/ab8500-core.c
*/
-
-#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0
-#define AB8500_INT_UN_PLUG_TV_DET 1
-#define AB8500_INT_PLUG_TV_DET 2
+/* Definitions for AB8500 and AB9540 */
+/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */
+#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */
#define AB8500_INT_TEMP_WARM 3
#define AB8500_INT_PON_KEY2DB_F 4
#define AB8500_INT_PON_KEY2DB_R 5
#define AB8500_INT_PON_KEY1DB_F 6
#define AB8500_INT_PON_KEY1DB_R 7
+/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
#define AB8500_INT_BATT_OVV 8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET 10
-#define AB8500_INT_MAIN_CH_PLUG_DET 11
-#define AB8500_INT_USB_ID_DET_F 12
-#define AB8500_INT_USB_ID_DET_R 13
+#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */
+#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */
#define AB8500_INT_VBUS_DET_F 14
#define AB8500_INT_VBUS_DET_R 15
+/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
#define AB8500_INT_VBUS_CH_DROP_END 16
#define AB8500_INT_RTC_60S 17
#define AB8500_INT_RTC_ALARM 18
#define AB8500_INT_BAT_CTRL_INDB 20
#define AB8500_INT_CH_WD_EXP 21
#define AB8500_INT_VBUS_OVV 22
-#define AB8500_INT_MAIN_CH_DROP_END 23
+#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */
+/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
#define AB8500_INT_CCN_CONV_ACC 24
#define AB8500_INT_INT_AUD 25
#define AB8500_INT_CCEOC 26
@@ -69,7 +96,8 @@ struct device;
#define AB8500_INT_LOW_BAT_R 29
#define AB8500_INT_BUP_CHG_NOT_OK 30
#define AB8500_INT_BUP_CHG_OK 31
-#define AB8500_INT_GP_HW_ADC_CONV_END 32
+/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
+#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */
#define AB8500_INT_ACC_DETECT_1DB_F 33
#define AB8500_INT_ACC_DETECT_1DB_R 34
#define AB8500_INT_ACC_DETECT_22DB_F 35
@@ -77,38 +105,43 @@ struct device;
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
-#define AB8500_INT_GPIO6R 40
-#define AB8500_INT_GPIO7R 41
-#define AB8500_INT_GPIO8R 42
-#define AB8500_INT_GPIO9R 43
+/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
+#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */
+#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */
+#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */
+#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */
#define AB8500_INT_GPIO10R 44
#define AB8500_INT_GPIO11R 45
-#define AB8500_INT_GPIO12R 46
+#define AB8500_INT_GPIO12R 46 /* not 8505 */
#define AB8500_INT_GPIO13R 47
-#define AB8500_INT_GPIO24R 48
-#define AB8500_INT_GPIO25R 49
-#define AB8500_INT_GPIO36R 50
-#define AB8500_INT_GPIO37R 51
-#define AB8500_INT_GPIO38R 52
-#define AB8500_INT_GPIO39R 53
+/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
+#define AB8500_INT_GPIO24R 48 /* not 8505 */
+#define AB8500_INT_GPIO25R 49 /* not 8505 */
+#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */
+#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */
+#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */
+#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */
#define AB8500_INT_GPIO40R 54
#define AB8500_INT_GPIO41R 55
-#define AB8500_INT_GPIO6F 56
-#define AB8500_INT_GPIO7F 57
-#define AB8500_INT_GPIO8F 58
-#define AB8500_INT_GPIO9F 59
+/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
+#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */
+#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */
+#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */
+#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */
#define AB8500_INT_GPIO10F 60
#define AB8500_INT_GPIO11F 61
-#define AB8500_INT_GPIO12F 62
+#define AB8500_INT_GPIO12F 62 /* not 8505 */
#define AB8500_INT_GPIO13F 63
-#define AB8500_INT_GPIO24F 64
-#define AB8500_INT_GPIO25F 65
-#define AB8500_INT_GPIO36F 66
-#define AB8500_INT_GPIO37F 67
-#define AB8500_INT_GPIO38F 68
-#define AB8500_INT_GPIO39F 69
+/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
+#define AB8500_INT_GPIO24F 64 /* not 8505 */
+#define AB8500_INT_GPIO25F 65 /* not 8505 */
+#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */
+#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */
+#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */
+#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */
#define AB8500_INT_GPIO40F 70
#define AB8500_INT_GPIO41F 71
+/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
#define AB8500_INT_ADP_SOURCE_ERROR 72
#define AB8500_INT_ADP_SINK_ERROR 73
#define AB8500_INT_ADP_PROBE_PLUG 74
@@ -116,30 +149,67 @@ struct device;
#define AB8500_INT_ADP_SENSE_OFF 76
#define AB8500_INT_USB_PHY_POWER_ERR 78
#define AB8500_INT_USB_LINK_STATUS 79
+/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
#define AB8500_INT_BTEMP_LOW 80
#define AB8500_INT_BTEMP_LOW_MEDIUM 81
#define AB8500_INT_BTEMP_MEDIUM_HIGH 82
#define AB8500_INT_BTEMP_HIGH 83
-#define AB8500_INT_USB_CHARGER_NOT_OK 89
+/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
+#define AB8500_INT_SRP_DETECT 88
+#define AB8500_INT_USB_CHARGER_NOT_OKR 89
#define AB8500_INT_ID_WAKEUP_R 90
#define AB8500_INT_ID_DET_R1R 92
#define AB8500_INT_ID_DET_R2R 93
#define AB8500_INT_ID_DET_R3R 94
#define AB8500_INT_ID_DET_R4R 95
+/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
#define AB8500_INT_ID_WAKEUP_F 96
#define AB8500_INT_ID_DET_R1F 98
#define AB8500_INT_ID_DET_R2F 99
#define AB8500_INT_ID_DET_R3F 100
#define AB8500_INT_ID_DET_R4F 101
-#define AB8500_INT_USB_CHG_DET_DONE 102
+#define AB8500_INT_CHAUTORESTARTAFTSEC 102
+#define AB8500_INT_CHSTOPBYSEC 103
+/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
#define AB8500_INT_USB_CH_TH_PROT_F 104
#define AB8500_INT_USB_CH_TH_PROT_R 105
-#define AB8500_INT_MAIN_CH_TH_PROT_F 106
-#define AB8500_INT_MAIN_CH_TH_PROT_R 107
-#define AB8500_INT_USB_CHARGER_NOT_OKF 111
+#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */
+#define AB8500_INT_CHCURLIMNOHSCHIRP 109
+#define AB8500_INT_CHCURLIMHSCHIRP 110
+#define AB8500_INT_XTAL32K_KO 111
+
+/* Definitions for AB9540 */
+/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
+#define AB9540_INT_GPIO50R 113
+#define AB9540_INT_GPIO51R 114 /* not 8505 */
+#define AB9540_INT_GPIO52R 115
+#define AB9540_INT_GPIO53R 116
+#define AB9540_INT_GPIO54R 117 /* not 8505 */
+#define AB9540_INT_IEXT_CH_RF_BFN_R 118
+#define AB9540_INT_IEXT_CH_RF_BFN_F 119
+/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
+#define AB9540_INT_GPIO50F 121
+#define AB9540_INT_GPIO51F 122 /* not 8505 */
+#define AB9540_INT_GPIO52F 123
+#define AB9540_INT_GPIO53F 124
+#define AB9540_INT_GPIO54F 125 /* not 8505 */
+/*
+ * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
+ * entire platform. This is a "compile time" constant so this must be set to
+ * the largest possible value that may be encountered with different AB SOCs.
+ * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
+ * which is larger.
+ */
#define AB8500_NR_IRQS 112
+#define AB8505_NR_IRQS 128
+#define AB9540_NR_IRQS 128
+/* This is set to the roof of any AB8500 chip variant IRQ counts */
+#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS
+
#define AB8500_NUM_IRQ_REGS 14
+#define AB9540_NUM_IRQ_REGS 17
/**
* struct ab8500 - ab8500 internal structure
@@ -147,13 +217,18 @@ struct device;
* @lock: read/write operations lock
* @irq_lock: genirq bus lock
* @irq: irq line
+ * @version: chip version id (e.g. ab8500 or ab9540)
* @chip_id: chip revision id
* @write: register write
+ * @write_masked: masked register write
* @read: register read
* @rx_buf: rx buf for SPI
* @tx_buf: tx buf for SPI
* @mask: cache of IRQ regs for bus lock
* @oldmask: cache of previous IRQ regs for bus lock
+ * @mask_size: Actual number of valid entries in mask[], oldmask[] and
+ * irq_reg_offset
+ * @irq_reg_offset: Array of offsets into IRQ registers
*/
struct ab8500 {
struct device *dev;
@@ -162,16 +237,20 @@ struct ab8500 {
int irq_base;
int irq;
+ enum ab8500_version version;
u8 chip_id;
- int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
- int (*read) (struct ab8500 *a8500, u16 addr);
+ int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
+ int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
+ int (*read)(struct ab8500 *ab8500, u16 addr);
unsigned long tx_buf[4];
unsigned long rx_buf[4];
- u8 mask[AB8500_NUM_IRQ_REGS];
- u8 oldmask[AB8500_NUM_IRQ_REGS];
+ u8 *mask;
+ u8 *oldmask;
+ int mask_size;
+ const int *irq_reg_offset;
};
struct regulator_reg_init;
@@ -197,7 +276,52 @@ struct ab8500_platform_data {
struct ab8500_gpio_platform_data *gpio;
};
-extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devinit ab8500_init(struct ab8500 *ab8500,
+ enum ab8500_version version);
extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+static inline int is_ab8500(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8500;
+}
+
+static inline int is_ab8505(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8505;
+}
+
+static inline int is_ab9540(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB9540;
+}
+
+static inline int is_ab8540(struct ab8500 *ab)
+{
+ return ab->version == AB8500_VERSION_AB8540;
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0(struct ab8500 *ab)
+{
+ return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
new file mode 100644
index 00000000000..22c1007d3ec
--- /dev/null
+++ b/include/linux/mfd/anatop.h
@@ -0,0 +1,40 @@
+/*
+ * anatop.h - Anatop MFD driver
+ *
+ * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ * Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_ANATOP_H
+#define __LINUX_MFD_ANATOP_H
+
+#include <linux/spinlock.h>
+
+/**
+ * anatop - MFD data
+ * @ioreg: ioremap register
+ * @reglock: spinlock for register read/write
+ */
+struct anatop {
+ void *ioreg;
+ spinlock_t reglock;
+};
+
+extern u32 anatop_get_bits(struct anatop *, u32, int, int);
+extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
+
+#endif /* __LINUX_MFD_ANATOP_H */
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 5702d1be13b..7ffbd6e9e7f 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -76,8 +76,6 @@ enum da9052_chip_id {
struct da9052_pdata;
struct da9052 {
- struct mutex io_lock;
-
struct device *dev;
struct regmap *regmap;
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 60d27f7bfc1..b3a43b1263f 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,6 +11,24 @@
#define __MFD_DB8500_PRCMU_H
#include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+/*
+ * Registers
+ */
+#define DB8500_PRCM_GPIOCR 0x138
+#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0)
+#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9)
+#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11)
+#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define DB8500_PRCM_LINE_VALUE 0x170
+#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3)
+
+#define DB8500_PRCM_DSI_SW_RESET 0x324
+#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
@@ -421,40 +439,22 @@ enum auto_enable {
/* End of file previously known as prcmu-fw-defs_v1.h */
/**
- * enum hw_acc_dev - enum for hw accelerators
- * @HW_ACC_SVAMMDSP: for SVAMMDSP
- * @HW_ACC_SVAPIPE: for SVAPIPE
- * @HW_ACC_SIAMMDSP: for SIAMMDSP
- * @HW_ACC_SIAPIPE: for SIAPIPE
- * @HW_ACC_SGA: for SGA
- * @HW_ACC_B2R2: for B2R2
- * @HW_ACC_MCDE: for MCDE
- * @HW_ACC_ESRAM1: for ESRAM1
- * @HW_ACC_ESRAM2: for ESRAM2
- * @HW_ACC_ESRAM3: for ESRAM3
- * @HW_ACC_ESRAM4: for ESRAM4
- * @NUM_HW_ACC: number of hardware accelerators
- *
- * Different hw accelerators which can be turned ON/
- * OFF or put into retention (MMDSPs and ESRAMs).
- * Used with EPOD API.
+ * enum prcmu_power_status - results from set_power_state
+ * @PRCMU_SLEEP_OK: Sleep went ok
+ * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
+ * @PRCMU_IDLE_OK: Idle went ok
+ * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
+ * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
+ * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
*
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator API.
*/
-enum hw_acc_dev {
- HW_ACC_SVAMMDSP,
- HW_ACC_SVAPIPE,
- HW_ACC_SIAMMDSP,
- HW_ACC_SIAPIPE,
- HW_ACC_SGA,
- HW_ACC_B2R2,
- HW_ACC_MCDE,
- HW_ACC_ESRAM1,
- HW_ACC_ESRAM2,
- HW_ACC_ESRAM3,
- HW_ACC_ESRAM4,
- NUM_HW_ACC
+enum prcmu_power_status {
+ PRCMU_SLEEP_OK = 0xf3,
+ PRCMU_DEEP_SLEEP_OK = 0xf6,
+ PRCMU_IDLE_OK = 0xf0,
+ PRCMU_DEEPIDLE_OK = 0xe3,
+ PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91,
+ PRCMU_ARMPENDINGIT_ER = 0x93,
};
/*
@@ -493,6 +493,20 @@ struct prcmu_auto_pm_config {
u8 sva_policy;
};
+#define PRCMU_FW_PROJECT_U8500 2
+#define PRCMU_FW_PROJECT_U9500 4
+#define PRCMU_FW_PROJECT_U8500_C2 7
+#define PRCMU_FW_PROJECT_U9500_C2 11
+#define PRCMU_FW_PROJECT_U8520 13
+#define PRCMU_FW_PROJECT_U8420 14
+
+struct prcmu_fw_version {
+ u8 project;
+ u8 api_version;
+ u8 func_version;
+ u8 errata;
+};
+
#ifdef CONFIG_MFD_DB8500_PRCMU
void db8500_prcmu_early_init(void);
@@ -500,42 +514,41 @@ int prcmu_set_rc_a2p(enum romcode_write);
enum romcode_read prcmu_get_rc_p2a(void);
enum ap_pwrst prcmu_get_xp70_current_state(void);
bool prcmu_has_arm_maxopp(void);
-bool prcmu_is_u8400(void);
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
+struct prcmu_fw_version *prcmu_get_fw_version(void);
int prcmu_request_ape_opp_100_voltage(bool enable);
int prcmu_release_usb_wakeup_state(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
-/* NOTE! Use regulator framework instead */
-int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
struct prcmu_auto_pm_config *idle);
bool prcmu_is_auto_pm_enabled(void);
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_hotdog(u8 threshold);
-int prcmu_config_hotmon(u8 low, u8 high);
-int prcmu_start_temp_sense(u16 cycles32k);
-int prcmu_stop_temp_sense(void);
+int db8500_prcmu_config_hotdog(u8 threshold);
+int db8500_prcmu_config_hotmon(u8 low, u8 high);
+int db8500_prcmu_start_temp_sense(u16 cycles32k);
+int db8500_prcmu_stop_temp_sense(void);
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
-void prcmu_enable_spi2(void);
-void prcmu_disable_spi2(void);
+void db8500_prcmu_modem_reset(void);
-int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
-int prcmu_enable_a9wdog(u8 id);
-int prcmu_disable_a9wdog(u8 id);
-int prcmu_kick_a9wdog(u8 id);
-int prcmu_load_a9wdog(u8 id, u32 val);
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int db8500_prcmu_enable_a9wdog(u8 id);
+int db8500_prcmu_disable_a9wdog(u8 id);
+int db8500_prcmu_kick_a9wdog(u8 id);
+int db8500_prcmu_load_a9wdog(u8 id, u32 val);
void db8500_prcmu_system_reset(u16 reset_code);
int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+u8 db8500_prcmu_get_power_state_result(void);
+int db8500_prcmu_gic_decouple(void);
+int db8500_prcmu_gic_recouple(void);
+int db8500_prcmu_copy_gic_settings(void);
+bool db8500_prcmu_gic_pending_irq(void);
+bool db8500_prcmu_pending_irq(void);
+bool db8500_prcmu_is_cpu_in_wfi(int cpu);
void db8500_prcmu_enable_wakeups(u32 wakeups);
int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
int db8500_prcmu_request_clock(u8 clock, bool enable);
@@ -549,6 +562,14 @@ u16 db8500_prcmu_get_reset_code(void);
bool db8500_prcmu_is_ac_wake_requested(void);
int db8500_prcmu_set_arm_opp(u8 opp);
int db8500_prcmu_get_arm_opp(void);
+int db8500_prcmu_set_ape_opp(u8 opp);
+int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_set_ddr_opp(u8 opp);
+int db8500_prcmu_get_ddr_opp(void);
+
+u32 db8500_prcmu_read(unsigned int reg);
+void db8500_prcmu_write(unsigned int reg, u32 value);
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
#else /* !CONFIG_MFD_DB8500_PRCMU */
@@ -574,17 +595,17 @@ static inline bool prcmu_has_arm_maxopp(void)
return false;
}
-static inline bool prcmu_is_u8400(void)
+static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
{
- return false;
+ return NULL;
}
-static inline int prcmu_set_ape_opp(u8 opp)
+static inline int db8500_prcmu_set_ape_opp(u8 opp)
{
return 0;
}
-static inline int prcmu_get_ape_opp(void)
+static inline int db8500_prcmu_get_ape_opp(void)
{
return APE_100_OPP;
}
@@ -599,21 +620,16 @@ static inline int prcmu_release_usb_wakeup_state(void)
return 0;
}
-static inline int prcmu_set_ddr_opp(u8 opp)
+static inline int db8500_prcmu_set_ddr_opp(u8 opp)
{
return 0;
}
-static inline int prcmu_get_ddr_opp(void)
+static inline int db8500_prcmu_get_ddr_opp(void)
{
return DDR_100_OPP;
}
-static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
-{
- return 0;
-}
-
static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
struct prcmu_auto_pm_config *idle)
{
@@ -634,22 +650,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
return 0;
}
-static inline int prcmu_config_hotdog(u8 threshold)
+static inline int db8500_prcmu_config_hotdog(u8 threshold)
{
return 0;
}
-static inline int prcmu_config_hotmon(u8 low, u8 high)
+static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
{
return 0;
}
-static inline int prcmu_start_temp_sense(u16 cycles32k)
+static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
{
return 0;
}
-static inline int prcmu_stop_temp_sense(void)
+static inline int db8500_prcmu_stop_temp_sense(void)
{
return 0;
}
@@ -668,22 +684,17 @@ static inline void prcmu_ac_wake_req(void) {}
static inline void prcmu_ac_sleep_req(void) {}
-static inline void prcmu_modem_reset(void) {}
+static inline void db8500_prcmu_modem_reset(void) {}
-static inline int prcmu_enable_spi2(void)
-{
- return 0;
-}
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
-static inline int prcmu_disable_spi2(void)
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
{
return 0;
}
-static inline void db8500_prcmu_system_reset(u16 reset_code) {}
-
-static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll)
+static inline u8 db8500_prcmu_get_power_state_result(void)
{
return 0;
}
@@ -729,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void)
return 0;
}
-static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
{
return 0;
}
-static inline int prcmu_enable_a9wdog(u8 id)
+static inline int db8500_prcmu_enable_a9wdog(u8 id)
{
return 0;
}
-static inline int prcmu_disable_a9wdog(u8 id)
+static inline int db8500_prcmu_disable_a9wdog(u8 id)
{
return 0;
}
-static inline int prcmu_kick_a9wdog(u8 id)
+static inline int db8500_prcmu_kick_a9wdog(u8 id)
{
return 0;
}
-static inline int prcmu_load_a9wdog(u8 id, u32 val)
+static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
{
return 0;
}
@@ -769,6 +780,16 @@ static inline int db8500_prcmu_get_arm_opp(void)
return 0;
}
+static inline u32 db8500_prcmu_read(unsigned int reg)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
+ u32 value) {}
+
#endif /* !CONFIG_MFD_DB8500_PRCMU */
#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index bac942f959c..d7674eb7305 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -10,7 +10,7 @@
#include <linux/interrupt.h>
#include <linux/notifier.h>
-#include <asm/mach-types.h>
+#include <linux/err.h>
/* PRCMU Wakeup defines */
enum prcmu_wakeup_index {
@@ -80,6 +80,29 @@ enum prcmu_wakeup_index {
#define EPOD_STATE_ON_CLK_OFF 0x03
#define EPOD_STATE_ON 0x04
+/* DB5500 CLKOUT IDs */
+enum {
+ DB5500_CLKOUT0 = 0,
+ DB5500_CLKOUT1,
+};
+
+/* DB5500 CLKOUTx sources */
+enum {
+ DB5500_CLKOUT_REF_CLK_SEL0,
+ DB5500_CLKOUT_RTC_CLK0_SEL0,
+ DB5500_CLKOUT_ULP_CLK_SEL0,
+ DB5500_CLKOUT_STATIC0,
+ DB5500_CLKOUT_REFCLK,
+ DB5500_CLKOUT_ULPCLK,
+ DB5500_CLKOUT_ARMCLK,
+ DB5500_CLKOUT_SYSACC0CLK,
+ DB5500_CLKOUT_SOC0PLLCLK,
+ DB5500_CLKOUT_SOC1PLLCLK,
+ DB5500_CLKOUT_DDRPLLCLK,
+ DB5500_CLKOUT_TVCLK,
+ DB5500_CLKOUT_IRDACLK,
+};
+
/*
* CLKOUT sources
*/
@@ -111,6 +134,7 @@ enum prcmu_clock {
PRCMU_MSP1CLK,
PRCMU_I2CCLK,
PRCMU_SDMMCCLK,
+ PRCMU_SPARE1CLK,
PRCMU_SLIMCLK,
PRCMU_PER1CLK,
PRCMU_PER2CLK,
@@ -139,12 +163,20 @@ enum prcmu_clock {
PRCMU_IRRCCLK,
PRCMU_SIACLK,
PRCMU_SVACLK,
+ PRCMU_ACLK,
PRCMU_NUM_REG_CLOCKS,
PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+ PRCMU_CDCLK,
PRCMU_TIMCLK,
PRCMU_PLLSOC0,
PRCMU_PLLSOC1,
PRCMU_PLLDDR,
+ PRCMU_PLLDSI,
+ PRCMU_DSI0CLK,
+ PRCMU_DSI1CLK,
+ PRCMU_DSI0ESCCLK,
+ PRCMU_DSI1ESCCLK,
+ PRCMU_DSI2ESCCLK,
};
/**
@@ -153,12 +185,14 @@ enum prcmu_clock {
* @APE_NO_CHANGE: The APE operating point is unchanged
* @APE_100_OPP: The new APE operating point is ape100opp
* @APE_50_OPP: 50%
+ * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
*/
enum ape_opp {
APE_OPP_INIT = 0x00,
APE_NO_CHANGE = 0x01,
APE_100_OPP = 0x02,
- APE_50_OPP = 0x03
+ APE_50_OPP = 0x03,
+ APE_50_PARTLY_25_OPP = 0xFF,
};
/**
@@ -218,9 +252,11 @@ enum ddr_pwrst {
#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+#include <mach/id.h>
+
static inline void __init prcmu_early_init(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_early_init();
else
return db8500_prcmu_early_init();
@@ -229,7 +265,7 @@ static inline void __init prcmu_early_init(void)
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_set_power_state(state, keep_ulp_clk,
keep_ap_pll);
else
@@ -237,9 +273,65 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
keep_ap_pll);
}
+static inline u8 prcmu_get_power_state_result(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_get_power_state_result();
+}
+
+static inline int prcmu_gic_decouple(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_gic_decouple();
+}
+
+static inline int prcmu_gic_recouple(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_gic_recouple();
+}
+
+static inline bool prcmu_gic_pending_irq(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_gic_pending_irq();
+}
+
+static inline bool prcmu_is_cpu_in_wfi(int cpu)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_is_cpu_in_wfi(cpu);
+}
+
+static inline int prcmu_copy_gic_settings(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_copy_gic_settings();
+}
+
+static inline bool prcmu_pending_irq(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_pending_irq();
+}
+
static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return -EINVAL;
else
return db8500_prcmu_set_epod(epod_id, epod_state);
@@ -247,7 +339,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
static inline void prcmu_enable_wakeups(u32 wakeups)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
db5500_prcmu_enable_wakeups(wakeups);
else
db8500_prcmu_enable_wakeups(wakeups);
@@ -260,7 +352,7 @@ static inline void prcmu_disable_wakeups(void)
static inline void prcmu_config_abb_event_readout(u32 abb_events)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
db5500_prcmu_config_abb_event_readout(abb_events);
else
db8500_prcmu_config_abb_event_readout(abb_events);
@@ -268,7 +360,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events)
static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
db5500_prcmu_get_abb_event_buffer(buf);
else
db8500_prcmu_get_abb_event_buffer(buf);
@@ -276,25 +368,40 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
static inline int prcmu_request_clock(u8 clock, bool enable)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_request_clock(clock, enable);
else
return db8500_prcmu_request_clock(clock, enable);
}
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
+unsigned long prcmu_clock_rate(u8 clock);
+long prcmu_round_clock_rate(u8 clock, unsigned long rate);
+int prcmu_set_clock_rate(u8 clock, unsigned long rate);
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_ddr_opp(opp);
+}
+static inline int prcmu_get_ddr_opp(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_get_ddr_opp();
+}
static inline int prcmu_set_arm_opp(u8 opp)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return -EINVAL;
else
return db8500_prcmu_set_arm_opp(opp);
@@ -302,15 +409,31 @@ static inline int prcmu_set_arm_opp(u8 opp)
static inline int prcmu_get_arm_opp(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return -EINVAL;
else
return db8500_prcmu_get_arm_opp();
}
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_ape_opp(opp);
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_get_ape_opp();
+}
+
static inline void prcmu_system_reset(u16 reset_code)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_system_reset(reset_code);
else
return db8500_prcmu_system_reset(reset_code);
@@ -318,7 +441,7 @@ static inline void prcmu_system_reset(u16 reset_code)
static inline u16 prcmu_get_reset_code(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_get_reset_code();
else
return db8500_prcmu_get_reset_code();
@@ -326,10 +449,17 @@ static inline u16 prcmu_get_reset_code(void)
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
+static inline void prcmu_modem_reset(void)
+{
+ if (cpu_is_u5500())
+ return;
+ else
+ return db8500_prcmu_modem_reset();
+}
+
static inline bool prcmu_is_ac_wake_requested(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_is_ac_wake_requested();
else
return db8500_prcmu_is_ac_wake_requested();
@@ -337,7 +467,7 @@ static inline bool prcmu_is_ac_wake_requested(void)
static inline int prcmu_set_display_clocks(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_set_display_clocks();
else
return db8500_prcmu_set_display_clocks();
@@ -345,7 +475,7 @@ static inline int prcmu_set_display_clocks(void)
static inline int prcmu_disable_dsipll(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_disable_dsipll();
else
return db8500_prcmu_disable_dsipll();
@@ -353,7 +483,7 @@ static inline int prcmu_disable_dsipll(void)
static inline int prcmu_enable_dsipll(void)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return db5500_prcmu_enable_dsipll();
else
return db8500_prcmu_enable_dsipll();
@@ -361,11 +491,107 @@ static inline int prcmu_enable_dsipll(void)
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
- if (machine_is_u5500())
+ if (cpu_is_u5500())
return -EINVAL;
else
return db8500_prcmu_config_esram0_deep_sleep(state);
}
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_config_hotdog(threshold);
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_config_hotmon(low, high);
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_start_temp_sense(cycles32k);
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_stop_temp_sense();
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_read(reg);
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value)
+{
+ if (cpu_is_u5500())
+ return;
+ else
+ db8500_prcmu_write(reg, value);
+}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
+{
+ if (cpu_is_u5500())
+ return;
+ else
+ db8500_prcmu_write_masked(reg, mask, value);
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_enable_a9wdog(id);
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_disable_a9wdog(id);
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_kick_a9wdog(id);
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_load_a9wdog(id, timeout);
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ if (cpu_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+}
#else
static inline void __init prcmu_early_init(void) {}
@@ -395,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
return -ENOSYS;
}
+static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
+ u8 size)
+{
+ return -ENOSYS;
+}
+
static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
{
return 0;
@@ -405,6 +637,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable)
return 0;
}
+static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+ return 0;
+}
+
+static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+ return 0;
+}
+
+static inline unsigned long prcmu_clock_rate(u8 clock)
+{
+ return 0;
+}
+
static inline int prcmu_set_ape_opp(u8 opp)
{
return 0;
@@ -480,14 +727,133 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
*buf = NULL;
}
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+ return 0;
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+ return 0;
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+ return 0;
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+ return 0;
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+ return 0;
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
+
+#endif
+
+static inline void prcmu_set(unsigned int reg, u32 bits)
+{
+ prcmu_write_masked(reg, bits, bits);
+}
+
+static inline void prcmu_clear(unsigned int reg, u32 bits)
+{
+ prcmu_write_masked(reg, bits, 0);
+}
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_enable_spi2(void)
+{
+ if (cpu_is_u8500())
+ prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_disable_spi2(void)
+{
+ if (cpu_is_u8500())
+ prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_enable_stm_mod_uart(void)
+{
+ if (cpu_is_u8500()) {
+ prcmu_set(DB8500_PRCM_GPIOCR,
+ (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+ DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+ }
+}
+
+/**
+ * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_disable_stm_mod_uart(void)
+{
+ if (cpu_is_u8500()) {
+ prcmu_clear(DB8500_PRCM_GPIOCR,
+ (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+ DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+ }
+}
+
+/**
+ * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_enable_stm_ape(void)
+{
+ if (cpu_is_u8500()) {
+ prcmu_set(DB8500_PRCM_GPIOCR,
+ DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+ }
+}
+
+/**
+ * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_disable_stm_ape(void)
+{
+ if (cpu_is_u8500()) {
+ prcmu_clear(DB8500_PRCM_GPIOCR,
+ DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+ }
+}
+
+#else
+
+static inline void prcmu_enable_spi2(void) {}
+static inline void prcmu_disable_spi2(void) {}
+static inline void prcmu_enable_stm_mod_uart(void) {}
+static inline void prcmu_disable_stm_mod_uart(void) {}
+static inline void prcmu_enable_stm_ape(void) {}
+static inline void prcmu_disable_stm_ape(void) {}
+
#endif
/* PRCMU QoS APE OPP class */
#define PRCMU_QOS_APE_OPP 1
#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_ARM_OPP 3
#define PRCMU_QOS_DEFAULT_VALUE -1
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index b86ee45c8b0..10e038bac8d 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
- unsigned int mode, unsigned int channel, unsigned int *sample);
+ unsigned int mode, unsigned int channel,
+ u8 ato, bool atox, unsigned int *sample);
#define MC13XXX_IRQ_ADCDONE 0
#define MC13XXX_IRQ_ADCBISDONE 1
@@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data {
unsigned short b3on_key;
};
+struct mc13xxx_ts_platform_data {
+ /* Delay between Touchscreen polarization and ADC Conversion.
+ * Given in clock ticks of a 32 kHz clock which gives a granularity of
+ * about 30.5ms */
+ u8 ato;
+
+#define MC13783_TS_ATO_FIRST false
+#define MC13783_TS_ATO_EACH true
+ /* Use the ATO delay only for the first conversion or for each one */
+ bool atox;
+};
+
struct mc13xxx_platform_data {
#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
#define MC13XXX_USE_CODEC (1 << 1)
@@ -167,6 +180,7 @@ struct mc13xxx_platform_data {
struct mc13xxx_regulator_platform_data regulators;
struct mc13xxx_leds_platform_data *leds;
struct mc13xxx_buttons_platform_data *buttons;
+ struct mc13xxx_ts_platform_data touch;
};
#define MC13XXX_ADC_MODE_TS 1
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
new file mode 100644
index 00000000000..a2c61609d21
--- /dev/null
+++ b/include/linux/mfd/rc5t583.h
@@ -0,0 +1,295 @@
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ * Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS 0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT 5
+#define RC5T583_MAX_GPEDGE_REG 2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS 9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1 0x19
+#define RC5T583_INT_EN_SYS2 0x1D
+#define RC5T583_INT_EN_DCDC 0x41
+#define RC5T583_INT_EN_RTC 0xED
+#define RC5T583_INT_EN_ADC1 0x90
+#define RC5T583_INT_EN_ADC2 0x91
+#define RC5T583_INT_EN_ADC3 0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL 0xAD
+#define RC5T583_INTC_INTEN 0xAE
+#define RC5T583_INTC_INTMON 0xAF
+
+#define RC5T583_INT_MON_GRP 0xAF
+#define RC5T583_INT_MON_SYS1 0x1B
+#define RC5T583_INT_MON_SYS2 0x1F
+#define RC5T583_INT_MON_DCDC 0x43
+#define RC5T583_INT_MON_RTC 0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1 0x1A
+#define RC5T583_INT_IR_SYS2 0x1E
+#define RC5T583_INT_IR_DCDC 0x42
+#define RC5T583_INT_IR_RTC 0xEE
+#define RC5T583_INT_IR_ADCL 0x94
+#define RC5T583_INT_IR_ADCH 0x95
+#define RC5T583_INT_IR_ADCEND 0x96
+#define RC5T583_INT_IR_GPIOR 0xA9
+#define RC5T583_INT_IR_GPIOF 0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1 0x21
+#define RC5T583_SLPSEQ2 0x22
+#define RC5T583_SLPSEQ3 0x23
+#define RC5T583_SLPSEQ4 0x24
+#define RC5T583_SLPSEQ5 0x25
+#define RC5T583_SLPSEQ6 0x26
+#define RC5T583_SLPSEQ7 0x27
+#define RC5T583_SLPSEQ8 0x28
+#define RC5T583_SLPSEQ9 0x29
+#define RC5T583_SLPSEQ10 0x2A
+#define RC5T583_SLPSEQ11 0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL 0x30
+#define RC5T583_REG_DC0DAC 0x31
+#define RC5T583_REG_DC0LATCTL 0x32
+#define RC5T583_REG_SR0CTL 0x33
+
+#define RC5T583_REG_DC1CTL 0x34
+#define RC5T583_REG_DC1DAC 0x35
+#define RC5T583_REG_DC1LATCTL 0x36
+#define RC5T583_REG_SR1CTL 0x37
+
+#define RC5T583_REG_DC2CTL 0x38
+#define RC5T583_REG_DC2DAC 0x39
+#define RC5T583_REG_DC2LATCTL 0x3A
+#define RC5T583_REG_SR2CTL 0x3B
+
+#define RC5T583_REG_DC3CTL 0x3C
+#define RC5T583_REG_DC3DAC 0x3D
+#define RC5T583_REG_DC3LATCTL 0x3E
+#define RC5T583_REG_SR3CTL 0x3F
+
+
+#define RC5T583_REG_LDOEN1 0x50
+#define RC5T583_REG_LDOEN2 0x51
+#define RC5T583_REG_LDODIS1 0x52
+#define RC5T583_REG_LDODIS2 0x53
+
+#define RC5T583_REG_LDO0DAC 0x54
+#define RC5T583_REG_LDO1DAC 0x55
+#define RC5T583_REG_LDO2DAC 0x56
+#define RC5T583_REG_LDO3DAC 0x57
+#define RC5T583_REG_LDO4DAC 0x58
+#define RC5T583_REG_LDO5DAC 0x59
+#define RC5T583_REG_LDO6DAC 0x5A
+#define RC5T583_REG_LDO7DAC 0x5B
+#define RC5T583_REG_LDO8DAC 0x5C
+#define RC5T583_REG_LDO9DAC 0x5D
+
+#define RC5T583_REG_DC0DAC_DS 0x60
+#define RC5T583_REG_DC1DAC_DS 0x61
+#define RC5T583_REG_DC2DAC_DS 0x62
+#define RC5T583_REG_DC3DAC_DS 0x63
+
+#define RC5T583_REG_LDO0DAC_DS 0x64
+#define RC5T583_REG_LDO1DAC_DS 0x65
+#define RC5T583_REG_LDO2DAC_DS 0x66
+#define RC5T583_REG_LDO3DAC_DS 0x67
+#define RC5T583_REG_LDO4DAC_DS 0x68
+#define RC5T583_REG_LDO5DAC_DS 0x69
+#define RC5T583_REG_LDO6DAC_DS 0x6A
+#define RC5T583_REG_LDO7DAC_DS 0x6B
+#define RC5T583_REG_LDO8DAC_DS 0x6C
+#define RC5T583_REG_LDO9DAC_DS 0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL 0xA0
+#define RC5T583_GPIO_PDEN 0xA1
+#define RC5T583_GPIO_IOOUT 0xA2
+#define RC5T583_GPIO_PGSEL 0xA3
+#define RC5T583_GPIO_GPINV 0xA4
+#define RC5T583_GPIO_GPDEB 0xA5
+#define RC5T583_GPIO_GPEDGE1 0xA6
+#define RC5T583_GPIO_GPEDGE2 0xA7
+#define RC5T583_GPIO_EN_INT 0xA8
+#define RC5T583_GPIO_MON_IOIN 0xAB
+#define RC5T583_GPIO_GPOFUNC 0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+ RC5T583_IRQ_ONKEY,
+ RC5T583_IRQ_ACOK,
+ RC5T583_IRQ_LIDOPEN,
+ RC5T583_IRQ_PREOT,
+ RC5T583_IRQ_CLKSTP,
+ RC5T583_IRQ_ONKEY_OFF,
+ RC5T583_IRQ_WD,
+ RC5T583_IRQ_EN_PWRREQ1,
+ RC5T583_IRQ_EN_PWRREQ2,
+ RC5T583_IRQ_PRE_VINDET,
+
+ RC5T583_IRQ_DC0LIM,
+ RC5T583_IRQ_DC1LIM,
+ RC5T583_IRQ_DC2LIM,
+ RC5T583_IRQ_DC3LIM,
+
+ RC5T583_IRQ_CTC,
+ RC5T583_IRQ_YALE,
+ RC5T583_IRQ_DALE,
+ RC5T583_IRQ_WALE,
+
+ RC5T583_IRQ_AIN1L,
+ RC5T583_IRQ_AIN2L,
+ RC5T583_IRQ_AIN3L,
+ RC5T583_IRQ_VBATL,
+ RC5T583_IRQ_VIN3L,
+ RC5T583_IRQ_VIN8L,
+ RC5T583_IRQ_AIN1H,
+ RC5T583_IRQ_AIN2H,
+ RC5T583_IRQ_AIN3H,
+ RC5T583_IRQ_VBATH,
+ RC5T583_IRQ_VIN3H,
+ RC5T583_IRQ_VIN8H,
+ RC5T583_IRQ_ADCEND,
+
+ RC5T583_IRQ_GPIO0,
+ RC5T583_IRQ_GPIO1,
+ RC5T583_IRQ_GPIO2,
+ RC5T583_IRQ_GPIO3,
+ RC5T583_IRQ_GPIO4,
+ RC5T583_IRQ_GPIO5,
+ RC5T583_IRQ_GPIO6,
+ RC5T583_IRQ_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+ RC5T583_GPIO0,
+ RC5T583_GPIO1,
+ RC5T583_GPIO2,
+ RC5T583_GPIO3,
+ RC5T583_GPIO4,
+ RC5T583_GPIO5,
+ RC5T583_GPIO6,
+ RC5T583_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_GPIO,
+};
+
+enum {
+ RC5T583_DS_NONE,
+ RC5T583_DS_DC0,
+ RC5T583_DS_DC1,
+ RC5T583_DS_DC2,
+ RC5T583_DS_DC3,
+ RC5T583_DS_LDO0,
+ RC5T583_DS_LDO1,
+ RC5T583_DS_LDO2,
+ RC5T583_DS_LDO3,
+ RC5T583_DS_LDO4,
+ RC5T583_DS_LDO5,
+ RC5T583_DS_LDO6,
+ RC5T583_DS_LDO7,
+ RC5T583_DS_LDO8,
+ RC5T583_DS_LDO9,
+ RC5T583_DS_PSO0,
+ RC5T583_DS_PSO1,
+ RC5T583_DS_PSO2,
+ RC5T583_DS_PSO3,
+ RC5T583_DS_PSO4,
+ RC5T583_DS_PSO5,
+ RC5T583_DS_PSO6,
+ RC5T583_DS_PSO7,
+
+ /* Should be last entry */
+ RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+ RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+ RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+ struct device *dev;
+ struct regmap *regmap;
+ int chip_irq;
+ int irq_base;
+ struct mutex irq_lock;
+ unsigned long group_irq_en[MAX_MAIN_INTERRUPT];
+
+ /* For main interrupt bits in INTC */
+ uint8_t intc_inten_reg;
+
+ /* For group interrupt bits and address */
+ uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+ /* For gpio edge */
+ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+ int irq_base;
+ bool enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+ unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+ int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 8c54de674b4..8516fd1eaab 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -28,6 +28,7 @@ enum stmpe_partnum {
STMPE1601,
STMPE2401,
STMPE2403,
+ STMPE_NBR_PARTS
};
/*
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
new file mode 100644
index 00000000000..38e31c55adb
--- /dev/null
+++ b/include/linux/mfd/tps65090.h
@@ -0,0 +1,46 @@
+/*
+ * Core driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65090_H
+#define __LINUX_MFD_TPS65090_H
+
+struct tps65090_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct tps65090_platform_data {
+ int irq_base;
+ int num_subdevs;
+ struct tps65090_subdev_info *subdevs;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS65090 sub-device drivers
+ */
+extern int tps65090_write(struct device *dev, int reg, uint8_t val);
+extern int tps65090_read(struct device *dev, int reg, uint8_t *val);
+extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num);
+extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num);
+
+#endif /*__LINUX_MFD_TPS65090_H */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
new file mode 100644
index 00000000000..e030ef9a64e
--- /dev/null
+++ b/include/linux/mfd/tps65217.h
@@ -0,0 +1,283 @@
+/*
+ * linux/mfd/tps65217.h
+ *
+ * Functions to access TPS65217 power management chip.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65217_H
+#define __LINUX_MFD_TPS65217_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* I2C ID for TPS65217 part */
+#define TPS65217_I2C_ID 0x24
+
+/* All register addresses */
+#define TPS65217_REG_CHIPID 0X00
+#define TPS65217_REG_PPATH 0X01
+#define TPS65217_REG_INT 0X02
+#define TPS65217_REG_CHGCONFIG0 0X03
+#define TPS65217_REG_CHGCONFIG1 0X04
+#define TPS65217_REG_CHGCONFIG2 0X05
+#define TPS65217_REG_CHGCONFIG3 0X06
+#define TPS65217_REG_WLEDCTRL1 0X07
+#define TPS65217_REG_WLEDCTRL2 0X08
+#define TPS65217_REG_MUXCTRL 0X09
+#define TPS65217_REG_STATUS 0X0A
+#define TPS65217_REG_PASSWORD 0X0B
+#define TPS65217_REG_PGOOD 0X0C
+#define TPS65217_REG_DEFPG 0X0D
+#define TPS65217_REG_DEFDCDC1 0X0E
+#define TPS65217_REG_DEFDCDC2 0X0F
+#define TPS65217_REG_DEFDCDC3 0X10
+#define TPS65217_REG_DEFSLEW 0X11
+#define TPS65217_REG_DEFLDO1 0X12
+#define TPS65217_REG_DEFLDO2 0X13
+#define TPS65217_REG_DEFLS1 0X14
+#define TPS65217_REG_DEFLS2 0X15
+#define TPS65217_REG_ENABLE 0X16
+#define TPS65217_REG_DEFUVLO 0X18
+#define TPS65217_REG_SEQ1 0X19
+#define TPS65217_REG_SEQ2 0X1A
+#define TPS65217_REG_SEQ3 0X1B
+#define TPS65217_REG_SEQ4 0X1C
+#define TPS65217_REG_SEQ5 0X1D
+#define TPS65217_REG_SEQ6 0X1E
+
+/* Register field definitions */
+#define TPS65217_CHIPID_CHIP_MASK 0xF0
+#define TPS65217_CHIPID_REV_MASK 0x0F
+
+#define TPS65217_PPATH_ACSINK_ENABLE BIT(7)
+#define TPS65217_PPATH_USBSINK_ENABLE BIT(6)
+#define TPS65217_PPATH_AC_PW_ENABLE BIT(5)
+#define TPS65217_PPATH_USB_PW_ENABLE BIT(4)
+#define TPS65217_PPATH_AC_CURRENT_MASK 0x0C
+#define TPS65217_PPATH_USB_CURRENT_MASK 0x03
+
+#define TPS65217_INT_PBM BIT(6)
+#define TPS65217_INT_ACM BIT(5)
+#define TPS65217_INT_USBM BIT(4)
+#define TPS65217_INT_PBI BIT(2)
+#define TPS65217_INT_ACI BIT(1)
+#define TPS65217_INT_USBI BIT(0)
+
+#define TPS65217_CHGCONFIG0_TREG BIT(7)
+#define TPS65217_CHGCONFIG0_DPPM BIT(6)
+#define TPS65217_CHGCONFIG0_TSUSP BIT(5)
+#define TPS65217_CHGCONFIG0_TERMI BIT(4)
+#define TPS65217_CHGCONFIG0_ACTIVE BIT(3)
+#define TPS65217_CHGCONFIG0_CHGTOUT BIT(2)
+#define TPS65217_CHGCONFIG0_PCHGTOUT BIT(1)
+#define TPS65217_CHGCONFIG0_BATTEMP BIT(0)
+
+#define TPS65217_CHGCONFIG1_TMR_MASK 0xC0
+#define TPS65217_CHGCONFIG1_TMR_ENABLE BIT(5)
+#define TPS65217_CHGCONFIG1_NTC_TYPE BIT(4)
+#define TPS65217_CHGCONFIG1_RESET BIT(3)
+#define TPS65217_CHGCONFIG1_TERM BIT(2)
+#define TPS65217_CHGCONFIG1_SUSP BIT(1)
+#define TPS65217_CHGCONFIG1_CHG_EN BIT(0)
+
+#define TPS65217_CHGCONFIG2_DYNTMR BIT(7)
+#define TPS65217_CHGCONFIG2_VPREGHG BIT(6)
+#define TPS65217_CHGCONFIG2_VOREG_MASK 0x30
+
+#define TPS65217_CHGCONFIG3_ICHRG_MASK 0xC0
+#define TPS65217_CHGCONFIG3_DPPMTH_MASK 0x30
+#define TPS65217_CHGCONFIG2_PCHRGT BIT(3)
+#define TPS65217_CHGCONFIG2_TERMIF 0x06
+#define TPS65217_CHGCONFIG2_TRANGE BIT(0)
+
+#define TPS65217_WLEDCTRL1_ISINK_ENABLE BIT(3)
+#define TPS65217_WLEDCTRL1_ISEL BIT(2)
+#define TPS65217_WLEDCTRL1_FDIM_MASK 0x03
+
+#define TPS65217_WLEDCTRL2_DUTY_MASK 0x7F
+
+#define TPS65217_MUXCTRL_MUX_MASK 0x07
+
+#define TPS65217_STATUS_OFF BIT(7)
+#define TPS65217_STATUS_ACPWR BIT(3)
+#define TPS65217_STATUS_USBPWR BIT(2)
+#define TPS65217_STATUS_PB BIT(0)
+
+#define TPS65217_PASSWORD_REGS_UNLOCK 0x7D
+
+#define TPS65217_PGOOD_LDO3_PG BIT(6)
+#define TPS65217_PGOOD_LDO4_PG BIT(5)
+#define TPS65217_PGOOD_DC1_PG BIT(4)
+#define TPS65217_PGOOD_DC2_PG BIT(3)
+#define TPS65217_PGOOD_DC3_PG BIT(2)
+#define TPS65217_PGOOD_LDO1_PG BIT(1)
+#define TPS65217_PGOOD_LDO2_PG BIT(0)
+
+#define TPS65217_DEFPG_LDO1PGM BIT(3)
+#define TPS65217_DEFPG_LDO2PGM BIT(2)
+#define TPS65217_DEFPG_PGDLY_MASK 0x03
+
+#define TPS65217_DEFDCDCX_XADJX BIT(7)
+#define TPS65217_DEFDCDCX_DCDC_MASK 0x3F
+
+#define TPS65217_DEFSLEW_GO BIT(7)
+#define TPS65217_DEFSLEW_GODSBL BIT(6)
+#define TPS65217_DEFSLEW_PFM_EN1 BIT(5)
+#define TPS65217_DEFSLEW_PFM_EN2 BIT(4)
+#define TPS65217_DEFSLEW_PFM_EN3 BIT(3)
+#define TPS65217_DEFSLEW_SLEW_MASK 0x07
+
+#define TPS65217_DEFLDO1_LDO1_MASK 0x0F
+
+#define TPS65217_DEFLDO2_TRACK BIT(6)
+#define TPS65217_DEFLDO2_LDO2_MASK 0x3F
+
+#define TPS65217_DEFLDO3_LDO3_EN BIT(5)
+#define TPS65217_DEFLDO3_LDO3_MASK 0x1F
+
+#define TPS65217_DEFLDO4_LDO4_EN BIT(5)
+#define TPS65217_DEFLDO4_LDO4_MASK 0x1F
+
+#define TPS65217_ENABLE_LS1_EN BIT(6)
+#define TPS65217_ENABLE_LS2_EN BIT(5)
+#define TPS65217_ENABLE_DC1_EN BIT(4)
+#define TPS65217_ENABLE_DC2_EN BIT(3)
+#define TPS65217_ENABLE_DC3_EN BIT(2)
+#define TPS65217_ENABLE_LDO1_EN BIT(1)
+#define TPS65217_ENABLE_LDO2_EN BIT(0)
+
+#define TPS65217_DEFUVLO_UVLOHYS BIT(2)
+#define TPS65217_DEFUVLO_UVLO_MASK 0x03
+
+#define TPS65217_SEQ1_DC1_SEQ_MASK 0xF0
+#define TPS65217_SEQ1_DC2_SEQ_MASK 0x0F
+
+#define TPS65217_SEQ2_DC3_SEQ_MASK 0xF0
+#define TPS65217_SEQ2_LDO1_SEQ_MASK 0x0F
+
+#define TPS65217_SEQ3_LDO2_SEQ_MASK 0xF0
+#define TPS65217_SEQ3_LDO3_SEQ_MASK 0x0F
+
+#define TPS65217_SEQ4_LDO4_SEQ_MASK 0xF0
+
+#define TPS65217_SEQ5_DLY1_MASK 0xC0
+#define TPS65217_SEQ5_DLY2_MASK 0x30
+#define TPS65217_SEQ5_DLY3_MASK 0x0C
+#define TPS65217_SEQ5_DLY4_MASK 0x03
+
+#define TPS65217_SEQ6_DLY5_MASK 0xC0
+#define TPS65217_SEQ6_DLY6_MASK 0x30
+#define TPS65217_SEQ6_SEQUP BIT(2)
+#define TPS65217_SEQ6_SEQDWN BIT(1)
+#define TPS65217_SEQ6_INSTDWN BIT(0)
+
+#define TPS65217_MAX_REGISTER 0x1E
+#define TPS65217_PROTECT_NONE 0
+#define TPS65217_PROTECT_L1 1
+#define TPS65217_PROTECT_L2 2
+
+
+enum tps65217_regulator_id {
+ /* DCDC's */
+ TPS65217_DCDC_1,
+ TPS65217_DCDC_2,
+ TPS65217_DCDC_3,
+ /* LDOs */
+ TPS65217_LDO_1,
+ TPS65217_LDO_2,
+ TPS65217_LDO_3,
+ TPS65217_LDO_4,
+};
+
+#define TPS65217_MAX_REG_ID TPS65217_LDO_4
+
+/* Number of step-down converters available */
+#define TPS65217_NUM_DCDC 3
+/* Number of LDO voltage regulators available */
+#define TPS65217_NUM_LDO 4
+/* Number of total regulators available */
+#define TPS65217_NUM_REGULATOR (TPS65217_NUM_DCDC + TPS65217_NUM_LDO)
+
+/**
+ * struct tps65217_board - packages regulator init data
+ * @tps65217_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator.
+ */
+struct tps65217_board {
+ struct regulator_init_data *tps65217_init_data;
+};
+
+/**
+ * struct tps_info - packages regulator constraints
+ * @name: Voltage regulator name
+ * @min_uV: minimum micro volts
+ * @max_uV: minimum micro volts
+ * @vsel_to_uv: Function pointer to get voltage from selector
+ * @uv_to_vsel: Function pointer to get selector from voltage
+ * @table: Table for non-uniform voltage step-size
+ * @table_len: Length of the voltage table
+ * @enable_mask: Regulator enable mask bits
+ * @set_vout_reg: Regulator output voltage set register
+ * @set_vout_mask: Regulator output voltage set mask
+ *
+ * This data is used to check the regualtor voltage limits while setting.
+ */
+struct tps_info {
+ const char *name;
+ int min_uV;
+ int max_uV;
+ int (*vsel_to_uv)(unsigned int vsel);
+ int (*uv_to_vsel)(int uV, unsigned int *vsel);
+ const int *table;
+ unsigned int table_len;
+ unsigned int enable_mask;
+ unsigned int set_vout_reg;
+ unsigned int set_vout_mask;
+};
+
+/**
+ * struct tps65217 - tps65217 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65217 chip
+ */
+
+struct tps65217 {
+ struct device *dev;
+ struct tps65217_board *pdata;
+ struct regulator_desc desc[TPS65217_NUM_REGULATOR];
+ struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
+ struct tps_info *info[TPS65217_NUM_REGULATOR];
+ struct regmap *regmap;
+
+ /* Client devices */
+ struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
+};
+
+static inline struct tps65217 *dev_to_tps65217(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
+ unsigned int *val);
+int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
+ unsigned int val, unsigned int level);
+int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
+ unsigned int mask, unsigned int val, unsigned int level);
+int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
+ unsigned int mask, unsigned int level);
+
+#endif /* __LINUX_MFD_TPS65217_H */
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 76700b5eee9..e34886397f9 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -17,6 +17,8 @@
#ifndef __LINUX_MFD_TPS65910_H
#define __LINUX_MFD_TPS65910_H
+#include <linux/gpio.h>
+
/* TPS chip id list */
#define TPS65910 0
#define TPS65911 1
@@ -796,6 +798,7 @@ struct tps65910_board {
struct tps65910 {
struct device *dev;
struct i2c_client *i2c_client;
+ struct regmap *regmap;
struct mutex io_mutex;
unsigned int id;
int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index dc3e0501168..893267bb622 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -22,7 +22,6 @@ struct wm8994_ldo_pdata {
/** GPIOs to enable regulator, 0 or less if not available */
int enable;
- const char *supply;
const struct regulator_init_data *init_data;
};
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 76579f964a2..7bd73bbdfd1 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -26,7 +26,26 @@ enum ab8500_regulator_id {
AB8500_NUM_REGULATORS,
};
-/* AB8500 register initialization */
+/* AB9450 regulators */
+enum ab9540_regulator_id {
+ AB9540_LDO_AUX1,
+ AB9540_LDO_AUX2,
+ AB9540_LDO_AUX3,
+ AB9540_LDO_AUX4,
+ AB9540_LDO_INTCORE,
+ AB9540_LDO_TVOUT,
+ AB9540_LDO_USB,
+ AB9540_LDO_AUDIO,
+ AB9540_LDO_ANAMIC1,
+ AB9540_LDO_ANAMIC2,
+ AB9540_LDO_DMIC,
+ AB9540_LDO_ANA,
+ AB9540_SYSCLKREQ_2,
+ AB9540_SYSCLKREQ_4,
+ AB9540_NUM_REGULATORS,
+};
+
+/* AB8500 and AB9540 register initialization */
struct ab8500_regulator_reg_init {
int id;
u8 value;
@@ -71,4 +90,53 @@ enum ab8500_regulator_reg {
AB8500_NUM_REGULATOR_REGISTERS,
};
+
+/* AB9540 registers */
+enum ab9540_regulator_reg {
+ AB9540_REGUREQUESTCTRL1,
+ AB9540_REGUREQUESTCTRL2,
+ AB9540_REGUREQUESTCTRL3,
+ AB9540_REGUREQUESTCTRL4,
+ AB9540_REGUSYSCLKREQ1HPVALID1,
+ AB9540_REGUSYSCLKREQ1HPVALID2,
+ AB9540_REGUHWHPREQ1VALID1,
+ AB9540_REGUHWHPREQ1VALID2,
+ AB9540_REGUHWHPREQ2VALID1,
+ AB9540_REGUHWHPREQ2VALID2,
+ AB9540_REGUSWHPREQVALID1,
+ AB9540_REGUSWHPREQVALID2,
+ AB9540_REGUSYSCLKREQVALID1,
+ AB9540_REGUSYSCLKREQVALID2,
+ AB9540_REGUVAUX4REQVALID,
+ AB9540_REGUMISC1,
+ AB9540_VAUDIOSUPPLY,
+ AB9540_REGUCTRL1VAMIC,
+ AB9540_VSMPS1REGU,
+ AB9540_VSMPS2REGU,
+ AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
+ AB9540_VPLLVANAREGU,
+ AB9540_EXTSUPPLYREGU,
+ AB9540_VAUX12REGU,
+ AB9540_VRF1VAUX3REGU,
+ AB9540_VSMPS1SEL1,
+ AB9540_VSMPS1SEL2,
+ AB9540_VSMPS1SEL3,
+ AB9540_VSMPS2SEL1,
+ AB9540_VSMPS2SEL2,
+ AB9540_VSMPS2SEL3,
+ AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
+ AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
+ AB9540_VAUX1SEL,
+ AB9540_VAUX2SEL,
+ AB9540_VRF1VAUX3SEL,
+ AB9540_REGUCTRL2SPARE,
+ AB9540_VAUX4REQCTRL,
+ AB9540_VAUX4REGU,
+ AB9540_VAUX4SEL,
+ AB9540_REGUCTRLDISCH,
+ AB9540_REGUCTRLDISCH2,
+ AB9540_REGUCTRLDISCH3,
+ AB9540_NUM_REGULATOR_REGISTERS,
+};
+
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 22:59:43 +0000