diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/platform_data/usb3503.h | 5 | ||||
| -rw-r--r-- | include/linux/usb.h | 21 | ||||
| -rw-r--r-- | include/linux/usb/chipidea.h | 31 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/of.h | 32 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 7 | ||||
| -rw-r--r-- | include/linux/usb/phy.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 15 | ||||
| -rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/wusb-wa.h | 17 |
10 files changed, 113 insertions, 34 deletions
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index 85dcc709f7e..1d1b6ef871f 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -3,6 +3,10 @@ #define USB3503_I2C_NAME "usb3503" +#define USB3503_OFF_PORT1 (1 << 1) +#define USB3503_OFF_PORT2 (1 << 2) +#define USB3503_OFF_PORT3 (1 << 3) + enum usb3503_mode { USB3503_MODE_UNKNOWN, USB3503_MODE_HUB, @@ -11,6 +15,7 @@ enum usb3503_mode { struct usb3503_platform_data { enum usb3503_mode initial_mode; + u8 port_off_mask; int gpio_intn; int gpio_connect; int gpio_reset; diff --git a/include/linux/usb.h b/include/linux/usb.h index a0bee5a28d1..a232b7ece1f 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -394,6 +394,22 @@ enum usb_port_connect_type { }; /* + * USB 2.0 Link Power Management (LPM) parameters. + */ +struct usb2_lpm_parameters { + /* Best effort service latency indicate how long the host will drive + * resume on an exit from L1. + */ + unsigned int besl; + + /* Timeout value in microseconds for the L1 inactivity (LPM) timer. + * When the timer counts to zero, the parent hub will initiate a LPM + * transition to L1. + */ + int timeout; +}; + +/* * USB 3.0 Link Power Management (LPM) parameters. * * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit. @@ -468,6 +484,7 @@ struct usb3_lpm_parameters { * @wusb: device is Wireless USB * @lpm_capable: device supports LPM * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM + * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled * @string_langid: language ID for strings @@ -487,6 +504,7 @@ struct usb3_lpm_parameters { * specific data for the device. * @slot_id: Slot ID assigned by xHCI * @removable: Device can be physically removed from this port + * @l1_params: best effor service latency for USB2 L1 LPM state, and L1 timeout. * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm() @@ -538,6 +556,7 @@ struct usb_device { unsigned wusb:1; unsigned lpm_capable:1; unsigned usb2_hw_lpm_capable:1; + unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; unsigned usb3_lpm_enabled:1; int string_langid; @@ -566,6 +585,7 @@ struct usb_device { struct wusb_dev *wusb_dev; int slot_id; enum usb_device_removable removable; + struct usb2_lpm_parameters l1_params; struct usb3_lpm_parameters u1_params; struct usb3_lpm_parameters u2_params; unsigned lpm_disable_count; @@ -717,6 +737,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, extern int usb_match_one_id(struct usb_interface *interface, const struct usb_device_id *id); +extern int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *)); extern struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor); extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 544825dde82..25629948c84 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -7,32 +7,33 @@ #include <linux/usb/otg.h> -struct ci13xxx; -struct ci13xxx_platform_data { +struct ci_hdrc; +struct ci_hdrc_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; unsigned power_budget; struct usb_phy *phy; + enum usb_phy_interface phy_mode; unsigned long flags; -#define CI13XXX_REGS_SHARED BIT(0) -#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) -#define CI13XXX_PULLUP_ON_VBUS BIT(2) -#define CI13XXX_DISABLE_STREAMING BIT(3) - -#define CI13XXX_CONTROLLER_RESET_EVENT 0 -#define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *ci, unsigned event); +#define CI_HDRC_REGS_SHARED BIT(0) +#define CI_HDRC_REQUIRE_TRANSCEIVER BIT(1) +#define CI_HDRC_PULLUP_ON_VBUS BIT(2) +#define CI_HDRC_DISABLE_STREAMING BIT(3) + enum usb_dr_mode dr_mode; +#define CI_HDRC_CONTROLLER_RESET_EVENT 0 +#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 + void (*notify_event) (struct ci_hdrc *ci, unsigned event); }; /* Default offset of capability registers */ #define DEF_CAPOFFSET 0x100 -/* Add ci13xxx device */ -struct platform_device *ci13xxx_add_device(struct device *dev, +/* Add ci hdrc device */ +struct platform_device *ci_hdrc_add_device(struct device *dev, struct resource *res, int nres, - struct ci13xxx_platform_data *platdata); -/* Remove ci13xxx device */ -void ci13xxx_remove_device(struct platform_device *pdev); + struct ci_hdrc_platform_data *platdata); +/* Remove ci hdrc device */ +void ci_hdrc_remove_device(struct platform_device *pdev); #endif diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index f5f5c7dfda9..1e88377e22f 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -218,6 +218,7 @@ struct hc_driver { #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ #define HCD_USB11 0x0010 /* USB 1.1 */ #define HCD_USB2 0x0020 /* USB 2.0 */ +#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ #define HCD_MASK 0x0070 diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h new file mode 100644 index 00000000000..a0ef405368b --- /dev/null +++ b/include/linux/usb/of.h @@ -0,0 +1,32 @@ +/* + * OF helpers for usb devices. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_USB_OF_H +#define __LINUX_USB_OF_H + +#include <linux/usb/otg.h> +#include <linux/usb/phy.h> + +#if IS_ENABLED(CONFIG_OF) +enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np); +#else +static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np) +{ + return USB_DR_MODE_UNKNOWN; +} +#endif + +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_PHY) +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np); +#else +static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np) +{ + return USBPHY_INTERFACE_MODE_UNKNOWN; +} + +#endif + +#endif /* __LINUX_USB_OF_H */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 291e01ba32e..154332b7c8c 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -92,4 +92,11 @@ otg_start_srp(struct usb_otg *otg) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); +enum usb_dr_mode { + USB_DR_MODE_UNKNOWN, + USB_DR_MODE_HOST, + USB_DR_MODE_PERIPHERAL, + USB_DR_MODE_OTG, +}; + #endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 6b5978f5763..44036808bf0 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -12,6 +12,15 @@ #include <linux/notifier.h> #include <linux/usb.h> +enum usb_phy_interface { + USBPHY_INTERFACE_MODE_UNKNOWN, + USBPHY_INTERFACE_MODE_UTMI, + USBPHY_INTERFACE_MODE_UTMIW, + USBPHY_INTERFACE_MODE_ULPI, + USBPHY_INTERFACE_MODE_SERIAL, + USBPHY_INTERFACE_MODE_HSIC, +}; + enum usb_phy_events { USB_EVENT_NONE, /* no events or cable disconnected */ USB_EVENT_VBUS, /* vbus valid event */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 302ddf55d2d..d528b804515 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -19,10 +19,6 @@ #include <linux/sysrq.h> #include <linux/kfifo.h> -#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ -#define SERIAL_TTY_MINORS 254 /* loads of devices :) */ -#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ - /* The maximum number of ports one device can grab at once */ #define MAX_NUM_PORTS 8 @@ -37,7 +33,8 @@ * @serial: pointer back to the struct usb_serial owner of this port. * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. - * @number: the number of the port (the minor number). + * @minor: the minor number of the port + * @port_number: the struct usb_serial port number of this port (starts at 0) * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe @@ -80,7 +77,8 @@ struct usb_serial_port { struct usb_serial *serial; struct tty_port port; spinlock_t lock; - unsigned char number; + u32 minor; + u8 port_number; unsigned char *interrupt_in_buffer; struct urb *interrupt_in_urb; @@ -140,7 +138,6 @@ static inline void usb_set_serial_port_data(struct usb_serial_port *port, * @dev: pointer to the struct usb_device for this device * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device - * @minor: the starting minor number for this device * @num_ports: the number of ports this device has * @num_interrupt_in: number of interrupt in endpoints we have * @num_interrupt_out: number of interrupt out endpoints we have @@ -159,7 +156,7 @@ struct usb_serial { unsigned char disconnected:1; unsigned char suspending:1; unsigned char attached:1; - unsigned char minor; + unsigned char minors_reserved:1; unsigned char num_ports; unsigned char num_port_pointers; char num_interrupt_in; @@ -319,7 +316,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} #endif /* Functions needed by other parts of the usbserial core */ -extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); +extern struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); extern void usb_serial_put(struct usb_serial *serial); extern int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index 1b7519a8c0b..d2ca919a5b7 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -42,6 +42,7 @@ enum tegra_usb_phy_port_speed { enum tegra_usb_phy_mode { TEGRA_USB_PHY_MODE_DEVICE, TEGRA_USB_PHY_MODE_HOST, + TEGRA_USB_PHY_MODE_OTG, }; struct tegra_xtal_freq; @@ -61,14 +62,10 @@ struct tegra_usb_phy { struct device *dev; bool is_legacy_phy; bool is_ulpi_phy; - void (*set_pts)(struct usb_phy *x, u8 pts_val); - void (*set_phcd)(struct usb_phy *x, bool enable); + int reset_gpio; }; -struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode, - void (*set_pts)(struct usb_phy *x, u8 pts_val), - void (*set_phcd)(struct usb_phy *x, bool enable)); +struct usb_phy *tegra_usb_get_phy(struct device_node *dn); void tegra_usb_phy_preresume(struct usb_phy *phy); diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h index f9dec37f617..6be985b2a43 100644 --- a/include/linux/usb/wusb-wa.h +++ b/include/linux/usb/wusb-wa.h @@ -92,11 +92,20 @@ struct usb_rpipe_descriptor { __le16 wRPipeIndex; __le16 wRequests; __le16 wBlocks; /* rw if 0 */ - __le16 wMaxPacketSize; /* rw? */ - u8 bHSHubAddress; /* reserved: 0 */ - u8 bHSHubPort; /* ??? FIXME ??? */ + __le16 wMaxPacketSize; /* rw */ + union { + u8 dwa_bHSHubAddress; /* rw: DWA. */ + u8 hwa_bMaxBurst; /* rw: HWA. */ + }; + union { + u8 dwa_bHSHubPort; /* rw: DWA. */ + u8 hwa_bDeviceInfoIndex; /* rw: HWA. */ + }; u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */ - u8 bDeviceAddress; /* rw: Target device address */ + union { + u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */ + u8 hwa_reserved; /* rw: HWA. */ + }; u8 bEndpointAddress; /* rw: Target EP address */ u8 bDataSequence; /* ro: Current Data sequence */ __le32 dwCurrentWindow; /* ro */ |