diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-pxa/udc.h | 17 | ||||
| -rw-r--r-- | include/asm-arm/mach/udc_pxa2xx.h | 26 |
2 files changed, 27 insertions, 16 deletions
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h index 121cd241115..646480d3725 100644 --- a/include/asm-arm/arch-pxa/udc.h +++ b/include/asm-arm/arch-pxa/udc.h @@ -4,23 +4,8 @@ * This supports machine-specific differences in how the PXA2xx * USB Device Controller (UDC) is wired. * - * It is set in linux/arch/arm/mach-pxa/<machine>.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c */ -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. - */ - u16 gpio_vbus; /* high == vbus present */ - u16 gpio_pullup; /* high == pullup activated */ -}; +#include <asm/mach/udc_pxa2xx.h> extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h new file mode 100644 index 00000000000..ff0a95715a0 --- /dev/null +++ b/include/asm-arm/mach/udc_pxa2xx.h @@ -0,0 +1,26 @@ +/* + * linux/include/asm-arm/mach/udc_pxa2xx.h + * + * This supports machine-specific differences in how the PXA2xx + * USB Device Controller (UDC) is wired. + * + * It is set in linux/arch/arm/mach-pxa/<machine>.c or in + * linux/arch/mach-ixp4xx/<machine>.c and used in + * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c + */ + +struct pxa2xx_udc_mach_info { + int (*udc_is_connected)(void); /* do we see host? */ + void (*udc_command)(int cmd); +#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ +#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. + */ + u16 gpio_vbus; /* high == vbus present */ + u16 gpio_pullup; /* high == pullup activated */ +}; + |