diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-avr32/arch-at32ap/at32ap700x.h | 49 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/board.h | 121 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/cpu.h | 35 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/gpio.h | 45 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/init.h | 18 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/io.h | 39 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/irq.h | 14 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/pm.h | 51 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/portmux.h | 29 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/smc.h | 113 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/sram.h | 30 |
11 files changed, 0 insertions, 544 deletions
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h deleted file mode 100644 index d18a3053be0..00000000000 --- a/include/asm-avr32/arch-at32ap/at32ap700x.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Pin definitions for AT32AP7000. - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_AT32AP700X_H__ -#define __ASM_ARCH_AT32AP700X_H__ - -#define GPIO_PERIPH_A 0 -#define GPIO_PERIPH_B 1 - -/* - * Pin numbers identifying specific GPIO pins on the chip. They can - * also be converted to IRQ numbers by passing them through - * gpio_to_irq(). - */ -#define GPIO_PIOA_BASE (0) -#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) -#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) -#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) -#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) - -#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) -#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) -#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) -#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) -#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) - - -/* - * DMAC peripheral hardware handshaking interfaces, used with dw_dmac - */ -#define DMAC_MCI_RX 0 -#define DMAC_MCI_TX 1 -#define DMAC_DAC_TX 2 -#define DMAC_AC97_A_RX 3 -#define DMAC_AC97_A_TX 4 -#define DMAC_AC97_B_RX 5 -#define DMAC_AC97_B_TX 6 -#define DMAC_DMAREQ_0 7 -#define DMAC_DMAREQ_1 8 -#define DMAC_DMAREQ_2 9 -#define DMAC_DMAREQ_3 10 - -#endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h deleted file mode 100644 index e60e9076544..00000000000 --- a/include/asm-avr32/arch-at32ap/board.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Platform data definitions. - */ -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include <linux/types.h> - -#define GPIO_PIN_NONE (-1) - -/* - * Clock rates for various on-board oscillators. The number of entries - * in this array is chip-dependent. - */ -extern unsigned long at32_board_osc_rates[]; - -/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ -void at32_add_system_devices(void); - -#define ATMEL_MAX_UART 4 -extern struct platform_device *atmel_default_console_device; - -struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ -}; -void at32_map_usart(unsigned int hw_id, unsigned int line); -struct platform_device *at32_add_device_usart(unsigned int id); - -struct eth_platform_data { - u32 phy_mask; - u8 is_rmii; -}; -struct platform_device * -at32_add_device_eth(unsigned int id, struct eth_platform_data *data); - -struct spi_board_info; -struct platform_device * -at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); - -struct atmel_lcdfb_info; -struct platform_device * -at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len, - unsigned int pin_config); - -struct usba_platform_data; -struct platform_device * -at32_add_device_usba(unsigned int id, struct usba_platform_data *data); - -struct ide_platform_data { - u8 cs; -}; -struct platform_device * -at32_add_device_ide(unsigned int id, unsigned int extint, - struct ide_platform_data *data); - -/* mask says which PWM channels to mux */ -struct platform_device *at32_add_device_pwm(u32 mask); - -/* depending on what's hooked up, not all SSC pins will be used */ -#define ATMEL_SSC_TK 0x01 -#define ATMEL_SSC_TF 0x02 -#define ATMEL_SSC_TD 0x04 -#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) - -#define ATMEL_SSC_RK 0x10 -#define ATMEL_SSC_RF 0x20 -#define ATMEL_SSC_RD 0x40 -#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) - -struct platform_device * -at32_add_device_ssc(unsigned int id, unsigned int flags); - -struct i2c_board_info; -struct platform_device *at32_add_device_twi(unsigned int id, - struct i2c_board_info *b, - unsigned int n); - -struct mci_platform_data; -struct platform_device * -at32_add_device_mci(unsigned int id, struct mci_platform_data *data); - -struct ac97c_platform_data { - unsigned short dma_rx_periph_id; - unsigned short dma_tx_periph_id; - unsigned short dma_controller_id; - int reset_pin; -}; -struct platform_device * -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); - -struct platform_device *at32_add_device_abdac(unsigned int id); -struct platform_device *at32_add_device_psif(unsigned int id); - -struct cf_platform_data { - int detect_pin; - int reset_pin; - int vcc_pin; - int ready_pin; - u8 cs; -}; -struct platform_device * -at32_add_device_cf(unsigned int id, unsigned int extint, - struct cf_platform_data *data); - -/* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition *(*partition_info)(int size, int *num_partitions); -}; -struct platform_device * -at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); - -#endif /* __ASM_ARCH_BOARD_H */ diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h deleted file mode 100644 index 44d0bfa1f40..00000000000 --- a/include/asm-avr32/arch-at32ap/cpu.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * AVR32 and (fake) AT91 CPU identification - * - * Copyright (C) 2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -/* - * Only AT32AP7000 is defined for now. We can identify the specific - * chip at runtime, but I'm not sure if it's really worth it. - */ -#ifdef CONFIG_CPU_AT32AP700X -# define cpu_is_at32ap7000() (1) -#else -# define cpu_is_at32ap7000() (0) -#endif - -/* - * Since this is AVR32, we will never run on any AT91 CPU. But these - * definitions may reduce clutter in common drivers. - */ -#define cpu_is_at91rm9200() (0) -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#define cpu_is_at91sam9261() (0) -#define cpu_is_at91sam9263() (0) -#define cpu_is_at91sam9rl() (0) -#define cpu_is_at91cap9() (0) - -#endif /* __ASM_ARCH_CPU_H */ diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h deleted file mode 100644 index 0180f584ef0..00000000000 --- a/include/asm-avr32/arch-at32ap/gpio.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __ASM_AVR32_ARCH_GPIO_H -#define __ASM_AVR32_ARCH_GPIO_H - -#include <linux/compiler.h> -#include <asm/irq.h> - - -/* Some GPIO chips can manage IRQs; some can't. The exact numbers can - * be changed if needed, but for the moment they're not configurable. - */ -#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32) - - -/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */ -#include <asm-generic/gpio.h> - -static inline int gpio_get_value(unsigned int gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned int gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned int gpio) -{ - return __gpio_cansleep(gpio); -} - - -static inline int gpio_to_irq(unsigned int gpio) -{ - if (gpio < NR_GPIO_IRQS) - return gpio + GPIO_IRQ_BASE; - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - return irq - GPIO_IRQ_BASE; -} - -#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/include/asm-avr32/arch-at32ap/init.h b/include/asm-avr32/arch-at32ap/init.h deleted file mode 100644 index bc40e3d4615..00000000000 --- a/include/asm-avr32/arch-at32ap/init.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * AT32AP platform initialization calls. - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_AT32AP_INIT_H__ -#define __ASM_AVR32_AT32AP_INIT_H__ - -void setup_platform(void); -void setup_board(void); - -void at32_setup_serial_console(unsigned int usart_id); - -#endif /* __ASM_AVR32_AT32AP_INIT_H__ */ diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h deleted file mode 100644 index 4ec6abc68ea..00000000000 --- a/include/asm-avr32/arch-at32ap/io.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H -#define __ASM_AVR32_ARCH_AT32AP_IO_H - -/* For "bizarre" halfword swapping */ -#include <linux/byteorder/swabb.h> - -#if defined(CONFIG_AP700X_32_BIT_SMC) -# define __swizzle_addr_b(addr) (addr ^ 3UL) -# define __swizzle_addr_w(addr) (addr ^ 2UL) -# define __swizzle_addr_l(addr) (addr) -# define ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define ioswabl(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define __mem_ioswabw(a, x) swab16(x) -# define __mem_ioswabl(a, x) swab32(x) -#elif defined(CONFIG_AP700X_16_BIT_SMC) -# define __swizzle_addr_b(addr) (addr ^ 1UL) -# define __swizzle_addr_w(addr) (addr) -# define __swizzle_addr_l(addr) (addr) -# define ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define ioswabl(a, x) swahw32(x) -# define __mem_ioswabb(a, x) (x) -# define __mem_ioswabw(a, x) swab16(x) -# define __mem_ioswabl(a, x) swahb32(x) -#else -# define __swizzle_addr_b(addr) (addr) -# define __swizzle_addr_w(addr) (addr) -# define __swizzle_addr_l(addr) (addr) -# define ioswabb(a, x) (x) -# define ioswabw(a, x) swab16(x) -# define ioswabl(a, x) swab32(x) -# define __mem_ioswabb(a, x) (x) -# define __mem_ioswabw(a, x) (x) -# define __mem_ioswabl(a, x) (x) -#endif - -#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/include/asm-avr32/arch-at32ap/irq.h b/include/asm-avr32/arch-at32ap/irq.h deleted file mode 100644 index 608e350368c..00000000000 --- a/include/asm-avr32/arch-at32ap/irq.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_AVR32_ARCH_IRQ_H -#define __ASM_AVR32_ARCH_IRQ_H - -#define EIM_IRQ_BASE NR_INTERNAL_IRQS -#define NR_EIM_IRQS 32 -#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) - -#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) -#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) -#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) - -#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) - -#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/include/asm-avr32/arch-at32ap/pm.h b/include/asm-avr32/arch-at32ap/pm.h deleted file mode 100644 index 979b355b77b..00000000000 --- a/include/asm-avr32/arch-at32ap/pm.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * AVR32 AP Power Management. - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_ARCH_PM_H -#define __ASM_AVR32_ARCH_PM_H - -/* Possible arguments to the "sleep" instruction */ -#define CPU_SLEEP_IDLE 0 -#define CPU_SLEEP_FROZEN 1 -#define CPU_SLEEP_STANDBY 2 -#define CPU_SLEEP_STOP 3 -#define CPU_SLEEP_STATIC 5 - -#ifndef __ASSEMBLY__ -extern void cpu_enter_idle(void); -extern void cpu_enter_standby(unsigned long sdramc_base); - -extern bool disable_idle_sleep; - -static inline void cpu_disable_idle_sleep(void) -{ - disable_idle_sleep = true; -} - -static inline void cpu_enable_idle_sleep(void) -{ - disable_idle_sleep = false; -} - -static inline void cpu_idle_sleep(void) -{ - /* - * If we're using the COUNT and COMPARE registers for - * timekeeping, we can't use the IDLE state. - */ - if (disable_idle_sleep) - cpu_relax(); - else - cpu_enter_idle(); -} - -void intc_set_suspend_handler(unsigned long offset); -#endif - -#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h deleted file mode 100644 index b1abe6b4e4e..00000000000 --- a/include/asm-avr32/arch-at32ap/portmux.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * AT32 portmux interface. - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PORTMUX_H__ -#define __ASM_ARCH_PORTMUX_H__ - -/* - * Set up pin multiplexing, called from board init only. - * - * The following flags determine the initial state of the pin. - */ -#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ -#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ -#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ -#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ -#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ - -void at32_select_periph(unsigned int pin, unsigned int periph, - unsigned long flags); -void at32_select_gpio(unsigned int pin, unsigned long flags); -void at32_reserve_pin(unsigned int pin); - -#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h deleted file mode 100644 index c98eea44a70..00000000000 --- a/include/asm-avr32/arch-at32ap/smc.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Static Memory Controller for AT32 chips - * - * Copyright (C) 2006 Atmel Corporation - * - * Inspired by the OMAP2 General-Purpose Memory Controller interface - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ARCH_AT32AP_SMC_H -#define __ARCH_AT32AP_SMC_H - -/* - * All timing parameters are in nanoseconds. - */ -struct smc_timing { - /* Delay from address valid to assertion of given strobe */ - int ncs_read_setup; - int nrd_setup; - int ncs_write_setup; - int nwe_setup; - - /* Pulse length of given strobe */ - int ncs_read_pulse; - int nrd_pulse; - int ncs_write_pulse; - int nwe_pulse; - - /* Total cycle length of given operation */ - int read_cycle; - int write_cycle; - - /* Minimal recovery times, will extend cycle if needed */ - int ncs_read_recover; - int nrd_recover; - int ncs_write_recover; - int nwe_recover; -}; - -/* - * All timing parameters are in clock cycles. - */ -struct smc_config { - - /* Delay from address valid to assertion of given strobe */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse length of given strobe */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Total cycle length of given operation */ - u8 read_cycle; - u8 write_cycle; - - /* Bus width in bytes */ - u8 bus_width; - - /* - * 0: Data is sampled on rising edge of NCS - * 1: Data is sampled on rising edge of NRD - */ - unsigned int nrd_controlled:1; - - /* - * 0: Data is driven on falling edge of NCS - * 1: Data is driven on falling edge of NWR - */ - unsigned int nwe_controlled:1; - - /* - * 0: NWAIT is disabled - * 1: Reserved - * 2: NWAIT is frozen mode - * 3: NWAIT in ready mode - */ - unsigned int nwait_mode:2; - - /* - * 0: Byte select access type - * 1: Byte write access type - */ - unsigned int byte_write:1; - - /* - * Number of clock cycles before data is released after - * the rising edge of the read controlling signal - * - * Total cycles from SMC is tdf_cycles + 1 - */ - unsigned int tdf_cycles:4; - - /* - * 0: TDF optimization disabled - * 1: TDF optimization enabled - */ - unsigned int tdf_mode:1; -}; - -extern void smc_set_timing(struct smc_config *config, - const struct smc_timing *timing); - -extern int smc_set_configuration(int cs, const struct smc_config *config); -extern struct smc_config *smc_get_configuration(int cs); - -#endif /* __ARCH_AT32AP_SMC_H */ diff --git a/include/asm-avr32/arch-at32ap/sram.h b/include/asm-avr32/arch-at32ap/sram.h deleted file mode 100644 index 4838dae7601..00000000000 --- a/include/asm-avr32/arch-at32ap/sram.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Simple SRAM allocator - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_ARCH_SRAM_H -#define __ASM_AVR32_ARCH_SRAM_H - -#include <linux/genalloc.h> - -extern struct gen_pool *sram_pool; - -static inline unsigned long sram_alloc(size_t len) -{ - if (!sram_pool) - return 0UL; - - return gen_pool_alloc(sram_pool, len); -} - -static inline void sram_free(unsigned long addr, size_t len) -{ - return gen_pool_free(sram_pool, addr, len); -} - -#endif /* __ASM_AVR32_ARCH_SRAM_H */ |