diff options
Diffstat (limited to 'include')
290 files changed, 5000 insertions, 18467 deletions
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h deleted file mode 100644 index 29feee27f0e..00000000000 --- a/include/acpi/acconfig.h +++ /dev/null @@ -1,217 +0,0 @@ -/****************************************************************************** - * - * Name: acconfig.h - Global configuration constants - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACCONFIG_H -#define _ACCONFIG_H - -/****************************************************************************** - * - * Configuration options - * - *****************************************************************************/ - -/* - * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the - * ACPI subsystem. This includes the DEBUG_PRINT output - * statements. When disabled, all DEBUG_PRINT - * statements are compiled out. - * - * ACPI_APPLICATION - Use this switch if the subsystem is going to be run - * at the application level. - * - */ - -/* Current ACPICA subsystem version in YYYYMMDD format */ - -#define ACPI_CA_VERSION 0x20080926 - -/* - * OS name, used for the _OS object. The _OS object is essentially obsolete, - * but there is a large base of ASL/AML code in existing machines that check - * for the string below. The use of this string usually guarantees that - * the ASL will execute down the most tested code path. Also, there is some - * code that will not execute the _OSI method unless _OS matches the string - * below. Therefore, change this string at your own risk. - */ -#define ACPI_OS_NAME "Microsoft Windows NT" - -/* Maximum objects in the various object caches */ - -#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ -#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ -#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ - -/* - * Should the subsystem abort the loading of an ACPI table if the - * table checksum is incorrect? - */ -#define ACPI_CHECKSUM_ABORT FALSE - -/****************************************************************************** - * - * Subsystem Constants - * - *****************************************************************************/ - -/* Version of ACPI supported */ - -#define ACPI_CA_SUPPORT_LEVEL 3 - -/* Maximum count for a semaphore object */ - -#define ACPI_MAX_SEMAPHORE_COUNT 256 - -/* Maximum object reference count (detects object deletion issues) */ - -#define ACPI_MAX_REFERENCE_COUNT 0x1000 - -/* Size of cached memory mapping for system memory operation region */ - -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 - -/* owner_id tracking. 8 entries allows for 255 owner_ids */ - -#define ACPI_NUM_OWNERID_MASKS 8 - -/* Size of the root table array is increased by this increment */ - -#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 - -/****************************************************************************** - * - * ACPI Specification constants (Do not change unless the specification changes) - * - *****************************************************************************/ - -/* Number of distinct GPE register blocks and register width */ - -#define ACPI_MAX_GPE_BLOCKS 2 -#define ACPI_GPE_REGISTER_WIDTH 8 - -/* Method info (in WALK_STATE), containing local variables and argumetns */ - -#define ACPI_METHOD_NUM_LOCALS 8 -#define ACPI_METHOD_MAX_LOCAL 7 - -#define ACPI_METHOD_NUM_ARGS 7 -#define ACPI_METHOD_MAX_ARG 6 - -/* Length of _HID, _UID, _CID, and UUID values */ - -#define ACPI_DEVICE_ID_LENGTH 0x09 -#define ACPI_MAX_CID_LENGTH 48 -#define ACPI_UUID_LENGTH 16 - -/* - * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG - */ -#define ACPI_OBJ_NUM_OPERANDS 8 -#define ACPI_OBJ_MAX_OPERAND 7 - -/* Number of elements in the Result Stack frame, can be an arbitrary value */ - -#define ACPI_RESULTS_FRAME_OBJ_NUM 8 - -/* - * Maximal number of elements the Result Stack can contain, - * it may be an arbitray value not exceeding the types of - * result_size and result_count (now u8). - */ -#define ACPI_RESULTS_OBJ_NUM_MAX 255 - -/* Names within the namespace are 4 bytes long */ - -#define ACPI_NAME_SIZE 4 -#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ -#define ACPI_PATH_SEPARATOR '.' - -/* Sizes for ACPI table headers */ - -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 - -/* Constants used in searching for the RSDP in low memory */ - -#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ -#define ACPI_EBDA_PTR_LENGTH 2 -#define ACPI_EBDA_WINDOW_SIZE 1024 -#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ -#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 -#define ACPI_RSDP_SCAN_STEP 16 - -/* Operation regions */ - -#define ACPI_NUM_PREDEFINED_REGIONS 8 -#define ACPI_USER_REGION_BEGIN 0x80 - -/* Maximum space_ids for Operation Regions */ - -#define ACPI_MAX_ADDRESS_SPACE 255 - -/* Array sizes. Used for range checking also */ - -#define ACPI_MAX_MATCH_OPCODE 5 - -/* RSDP checksums */ - -#define ACPI_RSDP_CHECKSUM_LENGTH 20 -#define ACPI_RSDP_XCHECKSUM_LENGTH 36 - -/* SMBus bidirectional buffer size */ - -#define ACPI_SMBUS_BUFFER_SIZE 34 - -/****************************************************************************** - * - * ACPI AML Debugger - * - *****************************************************************************/ - -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ - -#define ACPI_DEBUGGER_COMMAND_PROMPT '-' -#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' - -#endif /* _ACCONFIG_H */ diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h deleted file mode 100644 index 62c59df3b86..00000000000 --- a/include/acpi/acdebug.h +++ /dev/null @@ -1,231 +0,0 @@ -/****************************************************************************** - * - * Name: acdebug.h - ACPI/AML debugger - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACDEBUG_H__ -#define __ACDEBUG_H__ - -#define ACPI_DEBUG_BUFFER_SIZE 4196 - -struct command_info { - char *name; /* Command Name */ - u8 min_args; /* Minimum arguments required */ -}; - -struct argument_info { - char *name; /* Argument Name */ -}; - -#define PARAM_LIST(pl) pl -#define DBTEST_OUTPUT_LEVEL(lvl) if (acpi_gbl_db_opt_verbose) -#define VERBOSE_PRINT(fp) DBTEST_OUTPUT_LEVEL(lvl) {\ - acpi_os_printf PARAM_LIST(fp);} - -#define EX_NO_SINGLE_STEP 1 -#define EX_SINGLE_STEP 2 - -/* - * dbxface - external debugger interfaces - */ -acpi_status acpi_db_initialize(void); - -void acpi_db_terminate(void); - -acpi_status -acpi_db_single_step(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, u32 op_type); - -/* - * dbcmds - debug commands and output routines - */ -acpi_status acpi_db_disassemble_method(char *name); - -void acpi_db_display_table_info(char *table_arg); - -void acpi_db_unload_acpi_table(char *table_arg, char *instance_arg); - -void -acpi_db_set_method_breakpoint(char *location, - struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op); - -void acpi_db_get_bus_info(void); - -void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op); - -void acpi_db_dump_namespace(char *start_arg, char *depth_arg); - -void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg); - -void acpi_db_send_notify(char *name, u32 value); - -void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg); - -acpi_status -acpi_db_display_objects(char *obj_type_arg, char *display_count_arg); - -acpi_status acpi_db_find_name_in_namespace(char *name_arg); - -void acpi_db_set_scope(char *name); - -acpi_status acpi_db_sleep(char *object_arg); - -void acpi_db_find_references(char *object_arg); - -void acpi_db_display_locks(void); - -void acpi_db_display_resources(char *object_arg); - -void acpi_db_display_gpes(void); - -void acpi_db_check_integrity(void); - -void acpi_db_generate_gpe(char *gpe_arg, char *block_arg); - -void acpi_db_check_predefined_names(void); - -void acpi_db_batch_execute(void); - -/* - * dbdisply - debug display commands - */ -void acpi_db_display_method_info(union acpi_parse_object *op); - -void acpi_db_decode_and_display_object(char *target, char *output_type); - -void -acpi_db_display_result_object(union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -acpi_status acpi_db_display_all_methods(char *display_count_arg); - -void acpi_db_display_arguments(void); - -void acpi_db_display_locals(void); - -void acpi_db_display_results(void); - -void acpi_db_display_calling_tree(void); - -void acpi_db_display_object_type(char *object_arg); - -void -acpi_db_display_argument_object(union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -void acpi_db_check_predefined_names(void); - -void acpi_db_batch_execute(void); - -/* - * dbexec - debugger control method execution - */ -void acpi_db_execute(char *name, char **args, u32 flags); - -void -acpi_db_create_execution_threads(char *num_threads_arg, - char *num_loops_arg, char *method_name_arg); - -#ifdef ACPI_DBG_TRACK_ALLOCATIONS -u32 acpi_db_get_cache_info(struct acpi_memory_list *cache); -#endif - -/* - * dbfileio - Debugger file I/O commands - */ -acpi_object_type -acpi_db_match_argument(char *user_argument, struct argument_info *arguments); - -void acpi_db_close_debug_file(void); - -void acpi_db_open_debug_file(char *name); - -acpi_status acpi_db_load_acpi_table(char *filename); - -acpi_status -acpi_db_get_table_from_file(char *filename, struct acpi_table_header **table); - -acpi_status -acpi_db_read_table_from_file(char *filename, struct acpi_table_header **table); - -/* - * dbhistry - debugger HISTORY command - */ -void acpi_db_add_to_history(char *command_line); - -void acpi_db_display_history(void); - -char *acpi_db_get_from_history(char *command_num_arg); - -/* - * dbinput - user front-end to the AML debugger - */ -acpi_status -acpi_db_command_dispatch(char *input_buffer, - struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context); - -/* - * dbstats - Generation and display of ACPI table statistics - */ -void acpi_db_generate_statistics(union acpi_parse_object *root, u8 is_method); - -acpi_status acpi_db_display_statistics(char *type_arg); - -/* - * dbutils - AML debugger utilities - */ -void acpi_db_set_output_destination(u32 where); - -void acpi_db_dump_external_object(union acpi_object *obj_desc, u32 level); - -void acpi_db_prep_namestring(char *name); - -struct acpi_namespace_node *acpi_db_local_ns_lookup(char *name); - -void acpi_db_uint32_to_hex_string(u32 value, char *buffer); - -#endif /* __ACDEBUG_H__ */ diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h deleted file mode 100644 index 0c1ed387073..00000000000 --- a/include/acpi/acdisasm.h +++ /dev/null @@ -1,445 +0,0 @@ -/****************************************************************************** - * - * Name: acdisasm.h - AML disassembler - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACDISASM_H__ -#define __ACDISASM_H__ - -#include "amlresrc.h" - -#define BLOCK_NONE 0 -#define BLOCK_PAREN 1 -#define BLOCK_BRACE 2 -#define BLOCK_COMMA_LIST 4 -#define ACPI_DEFAULT_RESNAME *(u32 *) "__RD" - -struct acpi_external_list { - char *path; - char *internal_path; - struct acpi_external_list *next; - u32 value; - u16 length; - u8 type; -}; - -extern struct acpi_external_list *acpi_gbl_external_list; - -typedef const struct acpi_dmtable_info { - u8 opcode; - u8 offset; - char *name; - -} acpi_dmtable_info; - -/* - * Values for Opcode above. - * Note: 0-7 must not change, used as a flag shift value - */ -#define ACPI_DMT_FLAG0 0 -#define ACPI_DMT_FLAG1 1 -#define ACPI_DMT_FLAG2 2 -#define ACPI_DMT_FLAG3 3 -#define ACPI_DMT_FLAG4 4 -#define ACPI_DMT_FLAG5 5 -#define ACPI_DMT_FLAG6 6 -#define ACPI_DMT_FLAG7 7 -#define ACPI_DMT_FLAGS0 8 -#define ACPI_DMT_FLAGS2 9 -#define ACPI_DMT_UINT8 10 -#define ACPI_DMT_UINT16 11 -#define ACPI_DMT_UINT24 12 -#define ACPI_DMT_UINT32 13 -#define ACPI_DMT_UINT56 14 -#define ACPI_DMT_UINT64 15 -#define ACPI_DMT_STRING 16 -#define ACPI_DMT_NAME4 17 -#define ACPI_DMT_NAME6 18 -#define ACPI_DMT_NAME8 19 -#define ACPI_DMT_CHKSUM 20 -#define ACPI_DMT_SPACEID 21 -#define ACPI_DMT_GAS 22 -#define ACPI_DMT_ASF 23 -#define ACPI_DMT_DMAR 24 -#define ACPI_DMT_HEST 25 -#define ACPI_DMT_HESTNTFY 26 -#define ACPI_DMT_HESTNTYP 27 -#define ACPI_DMT_MADT 28 -#define ACPI_DMT_SRAT 29 -#define ACPI_DMT_EXIT 30 -#define ACPI_DMT_SIG 31 - -typedef -void (*acpi_dmtable_handler) (struct acpi_table_header * table); - -struct acpi_dmtable_data { - char *signature; - struct acpi_dmtable_info *table_info; - acpi_dmtable_handler table_handler; - char *name; -}; - -struct acpi_op_walk_info { - u32 level; - u32 last_level; - u32 count; - u32 bit_offset; - u32 flags; - struct acpi_walk_state *walk_state; -}; - -typedef -acpi_status(*asl_walk_callback) (union acpi_parse_object * op, - u32 level, void *context); - -struct acpi_resource_tag { - u32 bit_index; - char *tag; -}; - -/* Strings used for decoding flags to ASL keywords */ - -extern const char *acpi_gbl_word_decode[]; -extern const char *acpi_gbl_irq_decode[]; -extern const char *acpi_gbl_lock_rule[]; -extern const char *acpi_gbl_access_types[]; -extern const char *acpi_gbl_update_rules[]; -extern const char *acpi_gbl_match_ops[]; - -extern struct acpi_dmtable_info acpi_dm_table_info_asf0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf1a[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf2a[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf3[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf4[]; -extern struct acpi_dmtable_info acpi_dm_table_info_asf_hdr[]; -extern struct acpi_dmtable_info acpi_dm_table_info_boot[]; -extern struct acpi_dmtable_info acpi_dm_table_info_bert[]; -extern struct acpi_dmtable_info acpi_dm_table_info_cpep[]; -extern struct acpi_dmtable_info acpi_dm_table_info_cpep0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dbgp[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar_hdr[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar_scope[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_dmar2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_ecdt[]; -extern struct acpi_dmtable_info acpi_dm_table_info_einj[]; -extern struct acpi_dmtable_info acpi_dm_table_info_einj0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_erst[]; -extern struct acpi_dmtable_info acpi_dm_table_info_facs[]; -extern struct acpi_dmtable_info acpi_dm_table_info_fadt1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_fadt2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_gas[]; -extern struct acpi_dmtable_info acpi_dm_table_info_header[]; -extern struct acpi_dmtable_info acpi_dm_table_info_hest[]; -extern struct acpi_dmtable_info acpi_dm_table_info_hest9[]; -extern struct acpi_dmtable_info acpi_dm_table_info_hest_notify[]; -extern struct acpi_dmtable_info acpi_dm_table_info_hpet[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt3[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt4[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt5[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt6[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt7[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt8[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt9[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt10[]; -extern struct acpi_dmtable_info acpi_dm_table_info_madt_hdr[]; -extern struct acpi_dmtable_info acpi_dm_table_info_mcfg[]; -extern struct acpi_dmtable_info acpi_dm_table_info_mcfg0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_rsdp1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_rsdp2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_sbst[]; -extern struct acpi_dmtable_info acpi_dm_table_info_slic[]; -extern struct acpi_dmtable_info acpi_dm_table_info_slit[]; -extern struct acpi_dmtable_info acpi_dm_table_info_spcr[]; -extern struct acpi_dmtable_info acpi_dm_table_info_spmi[]; -extern struct acpi_dmtable_info acpi_dm_table_info_srat[]; -extern struct acpi_dmtable_info acpi_dm_table_info_srat_hdr[]; -extern struct acpi_dmtable_info acpi_dm_table_info_srat0[]; -extern struct acpi_dmtable_info acpi_dm_table_info_srat1[]; -extern struct acpi_dmtable_info acpi_dm_table_info_srat2[]; -extern struct acpi_dmtable_info acpi_dm_table_info_tcpa[]; -extern struct acpi_dmtable_info acpi_dm_table_info_wdrt[]; - -/* - * dmtable - */ -void acpi_dm_dump_data_table(struct acpi_table_header *table); - -acpi_status -acpi_dm_dump_table(u32 table_length, - u32 table_offset, - void *table, - u32 sub_table_length, struct acpi_dmtable_info *info); - -void acpi_dm_line_header(u32 offset, u32 byte_length, char *name); - -void acpi_dm_line_header2(u32 offset, u32 byte_length, char *name, u32 value); - -/* - * dmtbdump - */ -void acpi_dm_dump_asf(struct acpi_table_header *table); - -void acpi_dm_dump_cpep(struct acpi_table_header *table); - -void acpi_dm_dump_dmar(struct acpi_table_header *table); - -void acpi_dm_dump_einj(struct acpi_table_header *table); - -void acpi_dm_dump_erst(struct acpi_table_header *table); - -void acpi_dm_dump_fadt(struct acpi_table_header *table); - -void acpi_dm_dump_hest(struct acpi_table_header *table); - -void acpi_dm_dump_mcfg(struct acpi_table_header *table); - -void acpi_dm_dump_madt(struct acpi_table_header *table); - -u32 acpi_dm_dump_rsdp(struct acpi_table_header *table); - -void acpi_dm_dump_rsdt(struct acpi_table_header *table); - -void acpi_dm_dump_slit(struct acpi_table_header *table); - -void acpi_dm_dump_srat(struct acpi_table_header *table); - -void acpi_dm_dump_xsdt(struct acpi_table_header *table); - -/* - * dmwalk - */ -void -acpi_dm_disassemble(struct acpi_walk_state *walk_state, - union acpi_parse_object *origin, u32 num_opcodes); - -void -acpi_dm_walk_parse_tree(union acpi_parse_object *op, - asl_walk_callback descending_callback, - asl_walk_callback ascending_callback, void *context); - -/* - * dmopcode - */ -void -acpi_dm_disassemble_one_op(struct acpi_walk_state *walk_state, - struct acpi_op_walk_info *info, - union acpi_parse_object *op); - -void acpi_dm_decode_internal_object(union acpi_operand_object *obj_desc); - -u32 acpi_dm_list_type(union acpi_parse_object *op); - -void acpi_dm_method_flags(union acpi_parse_object *op); - -void acpi_dm_field_flags(union acpi_parse_object *op); - -void acpi_dm_address_space(u8 space_id); - -void acpi_dm_region_flags(union acpi_parse_object *op); - -void acpi_dm_match_op(union acpi_parse_object *op); - -u8 acpi_dm_comma_if_list_member(union acpi_parse_object *op); - -void acpi_dm_comma_if_field_member(union acpi_parse_object *op); - -/* - * dmnames - */ -u32 acpi_dm_dump_name(char *name); - -acpi_status -acpi_ps_display_object_pathname(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -void acpi_dm_namestring(char *name); - -/* - * dmobject - */ -void -acpi_dm_display_internal_object(union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -void acpi_dm_display_arguments(struct acpi_walk_state *walk_state); - -void acpi_dm_display_locals(struct acpi_walk_state *walk_state); - -void -acpi_dm_dump_method_info(acpi_status status, - struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -/* - * dmbuffer - */ -void acpi_dm_disasm_byte_list(u32 level, u8 * byte_data, u32 byte_count); - -void -acpi_dm_byte_list(struct acpi_op_walk_info *info, union acpi_parse_object *op); - -void acpi_dm_is_eisa_id(union acpi_parse_object *op); - -void acpi_dm_eisa_id(u32 encoded_id); - -u8 acpi_dm_is_unicode_buffer(union acpi_parse_object *op); - -u8 acpi_dm_is_string_buffer(union acpi_parse_object *op); - -/* - * dmresrc - */ -void acpi_dm_dump_integer8(u8 value, char *name); - -void acpi_dm_dump_integer16(u16 value, char *name); - -void acpi_dm_dump_integer32(u32 value, char *name); - -void acpi_dm_dump_integer64(u64 value, char *name); - -void -acpi_dm_resource_template(struct acpi_op_walk_info *info, - union acpi_parse_object *op, - u8 * byte_data, u32 byte_count); - -acpi_status acpi_dm_is_resource_template(union acpi_parse_object *op); - -void acpi_dm_indent(u32 level); - -void acpi_dm_bit_list(u16 mask); - -void acpi_dm_decode_attribute(u8 attribute); - -void acpi_dm_descriptor_name(void); - -/* - * dmresrcl - */ -void -acpi_dm_word_descriptor(union aml_resource *resource, u32 length, u32 level); - -void -acpi_dm_dword_descriptor(union aml_resource *resource, u32 length, u32 level); - -void -acpi_dm_extended_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_qword_descriptor(union aml_resource *resource, u32 length, u32 level); - -void -acpi_dm_memory24_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_memory32_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_fixed_memory32_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_generic_register_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_interrupt_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_vendor_large_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void acpi_dm_vendor_common(char *name, u8 * byte_data, u32 length, u32 level); - -/* - * dmresrcs - */ -void -acpi_dm_irq_descriptor(union aml_resource *resource, u32 length, u32 level); - -void -acpi_dm_dma_descriptor(union aml_resource *resource, u32 length, u32 level); - -void acpi_dm_io_descriptor(union aml_resource *resource, u32 length, u32 level); - -void -acpi_dm_fixed_io_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_start_dependent_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_end_dependent_descriptor(union aml_resource *resource, - u32 length, u32 level); - -void -acpi_dm_vendor_small_descriptor(union aml_resource *resource, - u32 length, u32 level); - -/* - * dmutils - */ -void acpi_dm_add_to_external_list(char *path, u8 type, u32 value); - -/* - * dmrestag - */ -void acpi_dm_find_resources(union acpi_parse_object *root); - -void -acpi_dm_check_resource_reference(union acpi_parse_object *op, - struct acpi_walk_state *walk_state); - -#endif /* __ACDISASM_H__ */ diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h deleted file mode 100644 index 6291904be01..00000000000 --- a/include/acpi/acdispat.h +++ /dev/null @@ -1,345 +0,0 @@ -/****************************************************************************** - * - * Name: acdispat.h - dispatcher (parser to interpreter interface) - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACDISPAT_H_ -#define _ACDISPAT_H_ - -#define NAMEOF_LOCAL_NTE "__L0" -#define NAMEOF_ARG_NTE "__A0" - -/* - * dsopcode - support for late evaluation - */ -acpi_status -acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc); - -acpi_status -acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc); - -acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *rgn_desc); - -acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc); - -acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc); - -acpi_status -acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - union acpi_operand_object *obj_desc); - -acpi_status -acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status acpi_ds_initialize_region(acpi_handle obj_handle); - -/* - * dsctrl - Parser/Interpreter interface, control stack routines - */ -acpi_status -acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ds_exec_end_control_op(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -/* - * dsexec - Parser/Interpreter interface, method execution callbacks - */ -acpi_status -acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state, - union acpi_operand_object *result_obj); - -acpi_status -acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, - union acpi_parse_object **out_op); - -acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *state); - -/* - * dsfield - Parser/Interpreter interface for AML fields - */ -acpi_status -acpi_ds_create_field(union acpi_parse_object *op, - struct acpi_namespace_node *region_node, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_create_bank_field(union acpi_parse_object *op, - struct acpi_namespace_node *region_node, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_create_index_field(union acpi_parse_object *op, - struct acpi_namespace_node *region_node, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_create_buffer_field(union acpi_parse_object *op, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_init_field_objects(union acpi_parse_object *op, - struct acpi_walk_state *walk_state); - -/* - * dsload - Parser/Interpreter interface, namespace load callbacks - */ -acpi_status -acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state, - union acpi_parse_object **out_op); - -acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state, - union acpi_parse_object **out_op); - -acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number); - -/* - * dsmthdat - method data (locals/args) - */ -acpi_status -acpi_ds_store_object_to_local(u8 type, - u32 index, - union acpi_operand_object *src_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_method_data_get_entry(u16 opcode, - u32 index, - struct acpi_walk_state *walk_state, - union acpi_operand_object ***node); - -void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state); - -u8 acpi_ds_is_method_value(union acpi_operand_object *obj_desc); - -acpi_status -acpi_ds_method_data_get_value(u8 type, - u32 index, - struct acpi_walk_state *walk_state, - union acpi_operand_object **dest_desc); - -acpi_status -acpi_ds_method_data_init_args(union acpi_operand_object **params, - u32 max_param_count, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_method_data_get_node(u8 type, - u32 index, - struct acpi_walk_state *walk_state, - struct acpi_namespace_node **node); - -void acpi_ds_method_data_init(struct acpi_walk_state *walk_state); - -/* - * dsmethod - Parser/Interpreter interface - control method parsing - */ -acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node); - -acpi_status -acpi_ds_call_control_method(struct acpi_thread_state *thread, - struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ds_restart_control_method(struct acpi_walk_state *walk_state, - union acpi_operand_object *return_desc); - -void -acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node, - union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state); - -/* - * dsinit - */ -acpi_status -acpi_ds_initialize_objects(u32 table_index, - struct acpi_namespace_node *start_node); - -/* - * dsobject - Parser/Interpreter interface - object initialization and conversion - */ -acpi_status -acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - u32 buffer_length, - union acpi_operand_object **obj_desc_ptr); - -acpi_status -acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - u32 package_length, - union acpi_operand_object **obj_desc); - -acpi_status -acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - u16 opcode, union acpi_operand_object **obj_desc); - -acpi_status -acpi_ds_create_node(struct acpi_walk_state *walk_state, - struct acpi_namespace_node *node, - union acpi_parse_object *op); - -/* - * dsutils - Parser/Interpreter interface utility routines - */ -void acpi_ds_clear_implicit_return(struct acpi_walk_state *walk_state); - -u8 -acpi_ds_do_implicit_return(union acpi_operand_object *return_desc, - struct acpi_walk_state *walk_state, - u8 add_reference); - -u8 -acpi_ds_is_result_used(union acpi_parse_object *op, - struct acpi_walk_state *walk_state); - -void -acpi_ds_delete_result_if_not_used(union acpi_parse_object *op, - union acpi_operand_object *result_obj, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_create_operand(struct acpi_walk_state *walk_state, - union acpi_parse_object *arg, u32 args_remaining); - -acpi_status -acpi_ds_create_operands(struct acpi_walk_state *walk_state, - union acpi_parse_object *first_arg); - -acpi_status acpi_ds_resolve_operands(struct acpi_walk_state *walk_state); - -void acpi_ds_clear_operands(struct acpi_walk_state *walk_state); - -acpi_status acpi_ds_evaluate_name_path(struct acpi_walk_state *walk_state); - -/* - * dswscope - Scope Stack manipulation - */ -acpi_status -acpi_ds_scope_stack_push(struct acpi_namespace_node *node, - acpi_object_type type, - struct acpi_walk_state *walk_state); - -acpi_status acpi_ds_scope_stack_pop(struct acpi_walk_state *walk_state); - -void acpi_ds_scope_stack_clear(struct acpi_walk_state *walk_state); - -/* - * dswstate - parser WALK_STATE management routines - */ -acpi_status -acpi_ds_obj_stack_push(void *object, struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state); - -struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object - *origin, union acpi_operand_object - *mth_desc, struct acpi_thread_state - *thread); - -acpi_status -acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - struct acpi_namespace_node *method_node, - u8 * aml_start, - u32 aml_length, - struct acpi_evaluate_info *info, u8 pass_number); - -void -acpi_ds_obj_stack_pop_and_delete(u32 pop_count, - struct acpi_walk_state *walk_state); - -void acpi_ds_delete_walk_state(struct acpi_walk_state *walk_state); - -struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state - *thread); - -void -acpi_ds_push_walk_state(struct acpi_walk_state *walk_state, - struct acpi_thread_state *thread); - -acpi_status acpi_ds_result_stack_clear(struct acpi_walk_state *walk_state); - -struct acpi_walk_state *acpi_ds_get_current_walk_state(struct acpi_thread_state - *thread); - -acpi_status -acpi_ds_result_pop(union acpi_operand_object **object, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ds_result_push(union acpi_operand_object *object, - struct acpi_walk_state *walk_state); - -#endif /* _ACDISPAT_H_ */ diff --git a/include/acpi/acevents.h b/include/acpi/acevents.h deleted file mode 100644 index d5d099bf349..00000000000 --- a/include/acpi/acevents.h +++ /dev/null @@ -1,216 +0,0 @@ -/****************************************************************************** - * - * Name: acevents.h - Event subcomponent prototypes and defines - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACEVENTS_H__ -#define __ACEVENTS_H__ - -/* - * evevent - */ -acpi_status acpi_ev_initialize_events(void); - -acpi_status acpi_ev_install_xrupt_handlers(void); - -acpi_status acpi_ev_install_fadt_gpes(void); - -u32 acpi_ev_fixed_event_detect(void); - -/* - * evmisc - */ -u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node); - -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_init_global_lock_handler(void); - -u32 acpi_ev_get_gpe_number_index(u32 gpe_number); - -acpi_status -acpi_ev_queue_notify_request(struct acpi_namespace_node *node, - u32 notify_value); - -/* - * evgpe - GPE handling and dispatch - */ -acpi_status -acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, - u8 type); - -acpi_status -acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info, - u8 write_to_hardware); - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); - -struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, - u32 gpe_number); - -/* - * evgpeblk - */ -u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback); - -acpi_status -acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block); - -acpi_status -acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, - struct acpi_generic_address *gpe_block_address, - u32 register_count, - u8 gpe_block_base_number, - u32 interrupt_number, - struct acpi_gpe_block_info **return_gpe_block); - -acpi_status -acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, - struct acpi_gpe_block_info *gpe_block); - -acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); - -u32 -acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, - u32 gpe_number); - -u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); - -acpi_status -acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type); - -acpi_status -acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status acpi_ev_gpe_initialize(void); - -/* - * evregion - Address Space handling - */ -acpi_status acpi_ev_install_region_handlers(void); - -acpi_status acpi_ev_initialize_op_regions(void); - -acpi_status -acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, - u32 function, - acpi_physical_address address, - u32 bit_width, acpi_integer * value); - -acpi_status -acpi_ev_attach_region(union acpi_operand_object *handler_obj, - union acpi_operand_object *region_obj, - u8 acpi_ns_is_locked); - -void -acpi_ev_detach_region(union acpi_operand_object *region_obj, - u8 acpi_ns_is_locked); - -acpi_status -acpi_ev_install_space_handler(struct acpi_namespace_node *node, - acpi_adr_space_type space_id, - acpi_adr_space_handler handler, - acpi_adr_space_setup setup, void *context); - -acpi_status -acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, - acpi_adr_space_type space_id); - -acpi_status -acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function); - -/* - * evregini - Region initialization and setup - */ -acpi_status -acpi_ev_system_memory_region_setup(acpi_handle handle, - u32 function, - void *handler_context, - void **region_context); - -acpi_status -acpi_ev_io_space_region_setup(acpi_handle handle, - u32 function, - void *handler_context, void **region_context); - -acpi_status -acpi_ev_pci_config_region_setup(acpi_handle handle, - u32 function, - void *handler_context, void **region_context); - -acpi_status -acpi_ev_cmos_region_setup(acpi_handle handle, - u32 function, - void *handler_context, void **region_context); - -acpi_status -acpi_ev_pci_bar_region_setup(acpi_handle handle, - u32 function, - void *handler_context, void **region_context); - -acpi_status -acpi_ev_default_region_setup(acpi_handle handle, - u32 function, - void *handler_context, void **region_context); - -acpi_status -acpi_ev_initialize_region(union acpi_operand_object *region_obj, - u8 acpi_ns_locked); - -/* - * evsci - SCI (System Control Interrupt) handling/dispatch - */ -u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context); - -u32 acpi_ev_install_sci_handler(void); - -acpi_status acpi_ev_remove_sci_handler(void); - -u32 acpi_ev_initialize_sCI(u32 program_sCI); - -void acpi_ev_terminate(void); - -#endif /* __ACEVENTS_H__ */ diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 84f5cb24286..eda04546cdf 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -153,8 +153,9 @@ #define AE_AML_CIRCULAR_REFERENCE (acpi_status) (0x001E | AE_CODE_AML) #define AE_AML_BAD_RESOURCE_LENGTH (acpi_status) (0x001F | AE_CODE_AML) #define AE_AML_ILLEGAL_ADDRESS (acpi_status) (0x0020 | AE_CODE_AML) +#define AE_AML_INFINITE_LOOP (acpi_status) (0x0021 | AE_CODE_AML) -#define AE_CODE_AML_MAX 0x0020 +#define AE_CODE_AML_MAX 0x0021 /* * Internal exceptions used for control @@ -175,6 +176,8 @@ #define AE_CODE_CTRL_MAX 0x000D +/* Exception strings for acpi_format_exception */ + #ifdef DEFINE_ACPI_GLOBALS /* @@ -267,6 +270,7 @@ char const *acpi_gbl_exception_names_aml[] = { "AE_AML_CIRCULAR_REFERENCE", "AE_AML_BAD_RESOURCE_LENGTH", "AE_AML_ILLEGAL_ADDRESS", + "AE_AML_INFINITE_LOOP" }; char const *acpi_gbl_exception_names_ctrl[] = { diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h deleted file mode 100644 index 15dda46b70d..00000000000 --- a/include/acpi/acglobal.h +++ /dev/null @@ -1,387 +0,0 @@ -/****************************************************************************** - * - * Name: acglobal.h - Declarations for global variables - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACGLOBAL_H__ -#define __ACGLOBAL_H__ - -/* - * Ensure that the globals are actually defined and initialized only once. - * - * The use of these macros allows a single list of globals (here) in order - * to simplify maintenance of the code. - */ -#ifdef DEFINE_ACPI_GLOBALS -#define ACPI_EXTERN -#define ACPI_INIT_GLOBAL(a,b) a=b -#else -#define ACPI_EXTERN extern -#define ACPI_INIT_GLOBAL(a,b) a -#endif - -/***************************************************************************** - * - * Runtime configuration (static defaults that can be overriden at runtime) - * - ****************************************************************************/ - -/* - * Enable "slack" in the AML interpreter? Default is FALSE, and the - * interpreter strictly follows the ACPI specification. Setting to TRUE - * allows the interpreter to ignore certain errors and/or bad AML constructs. - * - * Currently, these features are enabled by this flag: - * - * 1) Allow "implicit return" of last value in a control method - * 2) Allow access beyond the end of an operation region - * 3) Allow access to uninitialized locals/args (auto-init to integer 0) - * 4) Allow ANY object type to be a source operand for the Store() operator - * 5) Allow unresolved references (invalid target name) in package objects - * 6) Enable warning messages for behavior that is not ACPI spec compliant - */ -ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE); - -/* - * Automatically serialize ALL control methods? Default is FALSE, meaning - * to use the Serialized/not_serialized method flags on a per method basis. - * Only change this if the ASL code is poorly written and cannot handle - * reentrancy even though methods are marked "NotSerialized". - */ -ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_all_methods_serialized, FALSE); - -/* - * Create the predefined _OSI method in the namespace? Default is TRUE - * because ACPI CA is fully compatible with other ACPI implementations. - * Changing this will revert ACPI CA (and machine ASL) to pre-OSI behavior. - */ -ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE); - -/* - * Disable wakeup GPEs during runtime? Default is TRUE because WAKE and - * RUNTIME GPEs should never be shared, and WAKE GPEs should typically only - * be enabled just before going to sleep. - */ -ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE); - -/***************************************************************************** - * - * Debug support - * - ****************************************************************************/ - -/* Runtime configuration of debug print levels */ - -extern u32 acpi_dbg_level; -extern u32 acpi_dbg_layer; - -/* Procedure nesting level for debug output */ - -extern u32 acpi_gbl_nesting_level; - -/* Support for dynamic control method tracing mechanism */ - -ACPI_EXTERN u32 acpi_gbl_original_dbg_level; -ACPI_EXTERN u32 acpi_gbl_original_dbg_layer; -ACPI_EXTERN acpi_name acpi_gbl_trace_method_name; -ACPI_EXTERN u32 acpi_gbl_trace_dbg_level; -ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; -ACPI_EXTERN u32 acpi_gbl_trace_flags; - -/***************************************************************************** - * - * ACPI Table globals - * - ****************************************************************************/ - -/* - * acpi_gbl_root_table_list is the master list of ACPI tables found in the - * RSDT/XSDT. - * - * acpi_gbl_FADT is a local copy of the FADT, converted to a common format. - */ -ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; -ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; -extern u8 acpi_gbl_permanent_mmap; - -/* These addresses are calculated from FADT address values */ - -ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable; -ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable; - -/* - * Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is - * determined by the revision of the DSDT: If the DSDT revision is less than - * 2, use only the lower 32 bits of the internal 64-bit Integer. - */ -ACPI_EXTERN u8 acpi_gbl_integer_bit_width; -ACPI_EXTERN u8 acpi_gbl_integer_byte_width; -ACPI_EXTERN u8 acpi_gbl_integer_nybble_width; - -/***************************************************************************** - * - * Mutual exlusion within ACPICA subsystem - * - ****************************************************************************/ - -/* - * Predefined mutex objects. This array contains the - * actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs. - * (The table maps local handles to the real OS handles) - */ -ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[ACPI_NUM_MUTEX]; - -/* - * Global lock mutex is an actual AML mutex object - * Global lock semaphore works in conjunction with the HW global lock - */ -ACPI_EXTERN union acpi_operand_object *acpi_gbl_global_lock_mutex; -ACPI_EXTERN acpi_semaphore acpi_gbl_global_lock_semaphore; -ACPI_EXTERN u16 acpi_gbl_global_lock_handle; -ACPI_EXTERN u8 acpi_gbl_global_lock_acquired; -ACPI_EXTERN u8 acpi_gbl_global_lock_present; - -/* - * Spinlocks are used for interfaces that can be possibly called at - * interrupt level - */ -ACPI_EXTERN spinlock_t _acpi_gbl_gpe_lock; /* For GPE data structs and registers */ -ACPI_EXTERN spinlock_t _acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */ -#define acpi_gbl_gpe_lock &_acpi_gbl_gpe_lock -#define acpi_gbl_hardware_lock &_acpi_gbl_hardware_lock - -/***************************************************************************** - * - * Miscellaneous globals - * - ****************************************************************************/ - -#ifdef ACPI_DBG_TRACK_ALLOCATIONS - -/* Lists for tracking memory allocations */ - -ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list; -ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list; -ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats; -#endif - -/* Object caches */ - -ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache; -ACPI_EXTERN acpi_cache_t *acpi_gbl_state_cache; -ACPI_EXTERN acpi_cache_t *acpi_gbl_ps_node_cache; -ACPI_EXTERN acpi_cache_t *acpi_gbl_ps_node_ext_cache; -ACPI_EXTERN acpi_cache_t *acpi_gbl_operand_cache; - -/* Global handlers */ - -ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_device_notify; -ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_system_notify; -ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler; -ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler; -ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler; -ACPI_EXTERN void *acpi_gbl_table_handler_context; -ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk; - -/* Owner ID support */ - -ACPI_EXTERN u32 acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS]; -ACPI_EXTERN u8 acpi_gbl_last_owner_id_index; -ACPI_EXTERN u8 acpi_gbl_next_owner_id_offset; - -/* Misc */ - -ACPI_EXTERN u32 acpi_gbl_original_mode; -ACPI_EXTERN u32 acpi_gbl_rsdp_original_location; -ACPI_EXTERN u32 acpi_gbl_ns_lookup_count; -ACPI_EXTERN u32 acpi_gbl_ps_find_count; -ACPI_EXTERN u16 acpi_gbl_pm1_enable_register_save; -ACPI_EXTERN u8 acpi_gbl_debugger_configuration; -ACPI_EXTERN u8 acpi_gbl_step_to_next_call; -ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present; -ACPI_EXTERN u8 acpi_gbl_events_initialized; -ACPI_EXTERN u8 acpi_gbl_system_awake_and_running; - -#ifndef DEFINE_ACPI_GLOBALS - -/* Other miscellaneous */ - -extern u8 acpi_gbl_shutdown; -extern u32 acpi_gbl_startup_flags; -extern const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT]; -extern const char *acpi_gbl_highest_dstate_names[4]; -extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES]; -extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS]; - -#endif - -/* Exception codes */ - -extern char const *acpi_gbl_exception_names_env[]; -extern char const *acpi_gbl_exception_names_pgm[]; -extern char const *acpi_gbl_exception_names_tbl[]; -extern char const *acpi_gbl_exception_names_aml[]; -extern char const *acpi_gbl_exception_names_ctrl[]; - -/***************************************************************************** - * - * Namespace globals - * - ****************************************************************************/ - -#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY) -#define NUM_PREDEFINED_NAMES 10 -#else -#define NUM_PREDEFINED_NAMES 9 -#endif - -ACPI_EXTERN struct acpi_namespace_node acpi_gbl_root_node_struct; -ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_root_node; -ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_fadt_gpe_device; - -extern const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES]; -extern const struct acpi_predefined_names - acpi_gbl_pre_defined_names[NUM_PREDEFINED_NAMES]; - -#ifdef ACPI_DEBUG_OUTPUT -ACPI_EXTERN u32 acpi_gbl_current_node_count; -ACPI_EXTERN u32 acpi_gbl_current_node_size; -ACPI_EXTERN u32 acpi_gbl_max_concurrent_node_count; -ACPI_EXTERN acpi_size *acpi_gbl_entry_stack_pointer; -ACPI_EXTERN acpi_size *acpi_gbl_lowest_stack_pointer; -ACPI_EXTERN u32 acpi_gbl_deepest_nesting; -#endif - -/***************************************************************************** - * - * Interpreter globals - * - ****************************************************************************/ - -ACPI_EXTERN struct acpi_thread_state *acpi_gbl_current_walk_list; - -/* Control method single step flag */ - -ACPI_EXTERN u8 acpi_gbl_cm_single_step; - -/***************************************************************************** - * - * Hardware globals - * - ****************************************************************************/ - -extern struct acpi_bit_register_info - acpi_gbl_bit_register_info[ACPI_NUM_BITREG]; -ACPI_EXTERN u8 acpi_gbl_sleep_type_a; -ACPI_EXTERN u8 acpi_gbl_sleep_type_b; - -/***************************************************************************** - * - * Event and GPE globals - * - ****************************************************************************/ - -extern struct acpi_fixed_event_info - acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS]; -ACPI_EXTERN struct acpi_fixed_event_handler - acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS]; -ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; -ACPI_EXTERN struct acpi_gpe_block_info -*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; - -/***************************************************************************** - * - * Debugger globals - * - ****************************************************************************/ - -ACPI_EXTERN u8 acpi_gbl_db_output_flags; - -#ifdef ACPI_DISASSEMBLER - -ACPI_EXTERN u8 acpi_gbl_db_opt_disasm; -ACPI_EXTERN u8 acpi_gbl_db_opt_verbose; -#endif - -#ifdef ACPI_DEBUGGER - -extern u8 acpi_gbl_method_executing; -extern u8 acpi_gbl_abort_method; -extern u8 acpi_gbl_db_terminate_threads; - -ACPI_EXTERN int optind; -ACPI_EXTERN char *optarg; - -ACPI_EXTERN u8 acpi_gbl_db_opt_tables; -ACPI_EXTERN u8 acpi_gbl_db_opt_stats; -ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods; - -ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS]; -ACPI_EXTERN char acpi_gbl_db_line_buf[80]; -ACPI_EXTERN char acpi_gbl_db_parsed_buf[80]; -ACPI_EXTERN char acpi_gbl_db_scope_buf[40]; -ACPI_EXTERN char acpi_gbl_db_debug_filename[40]; -ACPI_EXTERN u8 acpi_gbl_db_output_to_file; -ACPI_EXTERN char *acpi_gbl_db_buffer; -ACPI_EXTERN char *acpi_gbl_db_filename; -ACPI_EXTERN u32 acpi_gbl_db_debug_level; -ACPI_EXTERN u32 acpi_gbl_db_console_debug_level; -ACPI_EXTERN struct acpi_table_header *acpi_gbl_db_table_ptr; -ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_db_scope_node; - -/* - * Statistic globals - */ -ACPI_EXTERN u16 acpi_gbl_obj_type_count[ACPI_TYPE_NS_NODE_MAX + 1]; -ACPI_EXTERN u16 acpi_gbl_node_type_count[ACPI_TYPE_NS_NODE_MAX + 1]; -ACPI_EXTERN u16 acpi_gbl_obj_type_count_misc; -ACPI_EXTERN u16 acpi_gbl_node_type_count_misc; -ACPI_EXTERN u32 acpi_gbl_num_nodes; -ACPI_EXTERN u32 acpi_gbl_num_objects; - -ACPI_EXTERN u32 acpi_gbl_size_of_parse_tree; -ACPI_EXTERN u32 acpi_gbl_size_of_method_trees; -ACPI_EXTERN u32 acpi_gbl_size_of_node_entries; -ACPI_EXTERN u32 acpi_gbl_size_of_acpi_objects; - -#endif /* ACPI_DEBUGGER */ - -#endif /* __ACGLOBAL_H__ */ diff --git a/include/acpi/achware.h b/include/acpi/achware.h deleted file mode 100644 index 97a72b19327..00000000000 --- a/include/acpi/achware.h +++ /dev/null @@ -1,131 +0,0 @@ -/****************************************************************************** - * - * Name: achware.h -- hardware specific interfaces - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACHWARE_H__ -#define __ACHWARE_H__ - -/* PM Timer ticks per second (HZ) */ - -#define PM_TIMER_FREQUENCY 3579545 - -/* Values for the _SST reserved method */ - -#define ACPI_SST_INDICATOR_OFF 0 -#define ACPI_SST_WORKING 1 -#define ACPI_SST_WAKING 2 -#define ACPI_SST_SLEEPING 3 -#define ACPI_SST_SLEEP_CONTEXT 4 - -/* Prototypes */ - -/* - * hwacpi - high level functions - */ -acpi_status acpi_hw_set_mode(u32 mode); - -u32 acpi_hw_get_mode(void); - -/* - * hwregs - ACPI Register I/O - */ -struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id); - -acpi_status -acpi_hw_register_read(u32 register_id, u32 * return_value); - -acpi_status acpi_hw_register_write(u32 register_id, u32 value); - -acpi_status -acpi_hw_low_level_read(u32 width, - u32 * value, struct acpi_generic_address *reg); - -acpi_status -acpi_hw_low_level_write(u32 width, u32 value, struct acpi_generic_address *reg); - -acpi_status acpi_hw_clear_acpi_status(void); - -/* - * hwgpe - GPE support - */ -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status -acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status -acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block); - -acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status -acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block); - -acpi_status -acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info, - acpi_event_status * event_status); - -acpi_status acpi_hw_disable_all_gpes(void); - -acpi_status acpi_hw_enable_all_runtime_gpes(void); - -acpi_status acpi_hw_enable_all_wakeup_gpes(void); - -acpi_status -acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block); - -#ifdef ACPI_FUTURE_USAGE -/* - * hwtimer - ACPI Timer prototypes - */ -acpi_status acpi_get_timer_resolution(u32 * resolution); - -acpi_status acpi_get_timer(u32 * ticks); - -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed); -#endif /* ACPI_FUTURE_USAGE */ - -#endif /* __ACHWARE_H__ */ diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h deleted file mode 100644 index e8db7a3143a..00000000000 --- a/include/acpi/acinterp.h +++ /dev/null @@ -1,529 +0,0 @@ -/****************************************************************************** - * - * Name: acinterp.h - Interpreter subcomponent prototypes and defines - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACINTERP_H__ -#define __ACINTERP_H__ - -#define ACPI_WALK_OPERANDS (&(walk_state->operands [walk_state->num_operands -1])) - -/* Macros for tables used for debug output */ - -#define ACPI_EXD_OFFSET(f) (u8) ACPI_OFFSET (union acpi_operand_object,f) -#define ACPI_EXD_NSOFFSET(f) (u8) ACPI_OFFSET (struct acpi_namespace_node,f) -#define ACPI_EXD_TABLE_SIZE(name) (sizeof(name) / sizeof (struct acpi_exdump_info)) - -/* - * If possible, pack the following structures to byte alignment, since we - * don't care about performance for debug output. Two cases where we cannot - * pack the structures: - * - * 1) Hardware does not support misaligned memory transfers - * 2) Compiler does not support pointers within packed structures - */ -#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED)) -#pragma pack(1) -#endif - -typedef const struct acpi_exdump_info { - u8 opcode; - u8 offset; - char *name; - -} acpi_exdump_info; - -/* Values for the Opcode field above */ - -#define ACPI_EXD_INIT 0 -#define ACPI_EXD_TYPE 1 -#define ACPI_EXD_UINT8 2 -#define ACPI_EXD_UINT16 3 -#define ACPI_EXD_UINT32 4 -#define ACPI_EXD_UINT64 5 -#define ACPI_EXD_LITERAL 6 -#define ACPI_EXD_POINTER 7 -#define ACPI_EXD_ADDRESS 8 -#define ACPI_EXD_STRING 9 -#define ACPI_EXD_BUFFER 10 -#define ACPI_EXD_PACKAGE 11 -#define ACPI_EXD_FIELD 12 -#define ACPI_EXD_REFERENCE 13 - -/* restore default alignment */ - -#pragma pack() - -/* - * exconvrt - object conversion - */ -acpi_status -acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 flags); - -acpi_status -acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc); - -acpi_status -acpi_ex_convert_to_string(union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc, u32 type); - -/* Types for ->String conversion */ - -#define ACPI_EXPLICIT_BYTE_COPY 0x00000000 -#define ACPI_EXPLICIT_CONVERT_HEX 0x00000001 -#define ACPI_IMPLICIT_CONVERT_HEX 0x00000002 -#define ACPI_EXPLICIT_CONVERT_DECIMAL 0x00000003 - -acpi_status -acpi_ex_convert_to_target_type(acpi_object_type destination_type, - union acpi_operand_object *source_desc, - union acpi_operand_object **result_desc, - struct acpi_walk_state *walk_state); - -/* - * exfield - ACPI AML (p-code) execution - field manipulation - */ -acpi_status -acpi_ex_common_buffer_setup(union acpi_operand_object *obj_desc, - u32 buffer_length, u32 * datum_count); - -acpi_status -acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc, - acpi_integer mask, - acpi_integer field_value, - u32 field_datum_byte_offset); - -void -acpi_ex_get_buffer_datum(acpi_integer * datum, - void *buffer, - u32 buffer_length, - u32 byte_granularity, u32 buffer_offset); - -void -acpi_ex_set_buffer_datum(acpi_integer merged_datum, - void *buffer, - u32 buffer_length, - u32 byte_granularity, u32 buffer_offset); - -acpi_status -acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, - union acpi_operand_object *obj_desc, - union acpi_operand_object **ret_buffer_desc); - -acpi_status -acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, - union acpi_operand_object *obj_desc, - union acpi_operand_object **result_desc); - -/* - * exfldio - low level field I/O - */ -acpi_status -acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, - void *buffer, u32 buffer_length); - -acpi_status -acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, - void *buffer, u32 buffer_length); - -acpi_status -acpi_ex_access_region(union acpi_operand_object *obj_desc, - u32 field_datum_byte_offset, - acpi_integer * value, u32 read_write); - -/* - * exmisc - misc support routines - */ -acpi_status -acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, - union acpi_operand_object **return_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_concat_template(union acpi_operand_object *obj_desc, - union acpi_operand_object *obj_desc2, - union acpi_operand_object **actual_return_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_do_concatenate(union acpi_operand_object *obj_desc, - union acpi_operand_object *obj_desc2, - union acpi_operand_object **actual_return_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_do_logical_numeric_op(u16 opcode, - acpi_integer integer0, - acpi_integer integer1, u8 * logical_result); - -acpi_status -acpi_ex_do_logical_op(u16 opcode, - union acpi_operand_object *operand0, - union acpi_operand_object *operand1, u8 * logical_result); - -acpi_integer -acpi_ex_do_math_op(u16 opcode, acpi_integer operand0, acpi_integer operand1); - -acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_create_processor(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_create_power_resource(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_create_region(u8 * aml_start, - u32 aml_length, - u8 region_space, struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_create_event(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_create_method(u8 * aml_start, - u32 aml_length, struct acpi_walk_state *walk_state); - -/* - * exconfig - dynamic table load/unload - */ -acpi_status -acpi_ex_load_op(union acpi_operand_object *obj_desc, - union acpi_operand_object *target, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_load_table_op(struct acpi_walk_state *walk_state, - union acpi_operand_object **return_desc); - -acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle); - -/* - * exmutex - mutex support - */ -acpi_status -acpi_ex_acquire_mutex(union acpi_operand_object *time_desc, - union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_acquire_mutex_object(u16 timeout, - union acpi_operand_object *obj_desc, - acpi_thread_id thread_id); - -acpi_status -acpi_ex_release_mutex(union acpi_operand_object *obj_desc, - struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc); - -void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread); - -void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc); - -/* - * exprep - ACPI AML execution - prep utilities - */ -acpi_status -acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, - u8 field_flags, - u8 field_attribute, - u32 field_bit_position, u32 field_bit_length); - -acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info); - -/* - * exsystem - Interface to OS services - */ -acpi_status -acpi_ex_system_do_notify_op(union acpi_operand_object *value, - union acpi_operand_object *obj_desc); - -acpi_status acpi_ex_system_do_suspend(acpi_integer time); - -acpi_status acpi_ex_system_do_stall(u32 time); - -acpi_status acpi_ex_system_signal_event(union acpi_operand_object *obj_desc); - -acpi_status -acpi_ex_system_wait_event(union acpi_operand_object *time, - union acpi_operand_object *obj_desc); - -acpi_status acpi_ex_system_reset_event(union acpi_operand_object *obj_desc); - -acpi_status -acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout); - -acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout); - -/* - * exoparg1 - ACPI AML execution, 1 operand - */ -acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state); - -/* - * exoparg2 - ACPI AML execution, 2 operands - */ -acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_2A_0T_1R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_2A_2T_1R(struct acpi_walk_state *walk_state); - -/* - * exoparg3 - ACPI AML execution, 3 operands - */ -acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state); - -acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state); - -/* - * exoparg6 - ACPI AML execution, 6 operands - */ -acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state *walk_state); - -/* - * exresolv - Object resolution and get value functions - */ -acpi_status -acpi_ex_resolve_to_value(union acpi_operand_object **stack_ptr, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, - union acpi_operand_object *operand, - acpi_object_type * return_type, - union acpi_operand_object **return_desc); - -/* - * exresnte - resolve namespace node - */ -acpi_status -acpi_ex_resolve_node_to_value(struct acpi_namespace_node **stack_ptr, - struct acpi_walk_state *walk_state); - -/* - * exresop - resolve operand to value - */ -acpi_status -acpi_ex_resolve_operands(u16 opcode, - union acpi_operand_object **stack_ptr, - struct acpi_walk_state *walk_state); - -/* - * exdump - Interpreter debug output routines - */ -void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth); - -void -acpi_ex_dump_operands(union acpi_operand_object **operands, - const char *opcode_name, u32 num_opcodes); - -#ifdef ACPI_FUTURE_USAGE -void -acpi_ex_dump_object_descriptor(union acpi_operand_object *object, u32 flags); - -void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags); -#endif /* ACPI_FUTURE_USAGE */ - -/* - * exnames - AML namestring support - */ -acpi_status -acpi_ex_get_name_string(acpi_object_type data_type, - u8 * in_aml_address, - char **out_name_string, u32 * out_name_length); - -/* - * exstore - Object store support - */ -acpi_status -acpi_ex_store(union acpi_operand_object *val_desc, - union acpi_operand_object *dest_desc, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, - struct acpi_namespace_node *node, - struct acpi_walk_state *walk_state, - u8 implicit_conversion); - -#define ACPI_IMPLICIT_CONVERSION TRUE -#define ACPI_NO_IMPLICIT_CONVERSION FALSE - -/* - * exstoren - resolve/store object - */ -acpi_status -acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, - acpi_object_type target_type, - struct acpi_walk_state *walk_state); - -acpi_status -acpi_ex_store_object_to_object(union acpi_operand_object *source_desc, - union acpi_operand_object *dest_desc, - union acpi_operand_object **new_desc, - struct acpi_walk_state *walk_state); - -/* - * exstorob - store object - buffer/string - */ -acpi_status -acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc, - union acpi_operand_object *target_desc); - -acpi_status -acpi_ex_store_string_to_string(union acpi_operand_object *source_desc, - union acpi_operand_object *target_desc); - -/* - * excopy - object copy - */ -acpi_status -acpi_ex_copy_integer_to_index_field(union acpi_operand_object *source_desc, - union acpi_operand_object *target_desc); - -acpi_status -acpi_ex_copy_integer_to_bank_field(union acpi_operand_object *source_desc, - union acpi_operand_object *target_desc); - -acpi_status -acpi_ex_copy_data_to_named_field(union acpi_operand_object *source_desc, - struct acpi_namespace_node *node); - -acpi_status -acpi_ex_copy_integer_to_buffer_field(union acpi_operand_object *source_desc, - union acpi_operand_object *target_desc); - -/* - * exutils - interpreter/scanner utilities - */ -void acpi_ex_enter_interpreter(void); - -void acpi_ex_exit_interpreter(void); - -void acpi_ex_reacquire_interpreter(void); - -void acpi_ex_relinquish_interpreter(void); - -void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc); - -void acpi_ex_acquire_global_lock(u32 rule); - -void acpi_ex_release_global_lock(u32 rule); - -void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string); - -void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string); - -/* - * exregion - default op_region handlers - */ -acpi_status -acpi_ex_system_memory_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, - void *region_context); - -acpi_status -acpi_ex_system_io_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -acpi_status -acpi_ex_pci_config_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -acpi_status -acpi_ex_cmos_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -acpi_status -acpi_ex_pci_bar_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -acpi_status -acpi_ex_embedded_controller_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, - void *region_context); - -acpi_status -acpi_ex_sm_bus_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -acpi_status -acpi_ex_data_table_space_handler(u32 function, - acpi_physical_address address, - u32 bit_width, - acpi_integer * value, - void *handler_context, void *region_context); - -#endif /* __INTERP_H__ */ diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h deleted file mode 100644 index ecab527cf78..00000000000 --- a/include/acpi/aclocal.h +++ /dev/null @@ -1,1044 +0,0 @@ -/****************************************************************************** - * - * Name: aclocal.h - Internal data types used across the ACPI subsystem - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACLOCAL_H__ -#define __ACLOCAL_H__ - -/* acpisrc:struct_defs -- for acpisrc conversion */ - -#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ -#define ACPI_DO_NOT_WAIT 0 -#define ACPI_SERIALIZED 0xFF - -typedef u32 acpi_mutex_handle; -#define ACPI_GLOBAL_LOCK (acpi_semaphore) (-1) - -/* Total number of aml opcodes defined */ - -#define AML_NUM_OPCODES 0x7F - -/* Forward declarations */ - -struct acpi_walk_state; -struct acpi_obj_mutex; -union acpi_parse_object; - -/***************************************************************************** - * - * Mutex typedefs and structs - * - ****************************************************************************/ - -/* - * Predefined handles for the mutex objects used within the subsystem - * All mutex objects are automatically created by acpi_ut_mutex_initialize. - * - * The acquire/release ordering protocol is implied via this list. Mutexes - * with a lower value must be acquired before mutexes with a higher value. - * - * NOTE: any changes here must be reflected in the acpi_gbl_mutex_names - * table below also! - */ -#define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */ -#define ACPI_MTX_NAMESPACE 1 /* ACPI Namespace */ -#define ACPI_MTX_TABLES 2 /* Data for ACPI tables */ -#define ACPI_MTX_EVENTS 3 /* Data for ACPI events */ -#define ACPI_MTX_CACHES 4 /* Internal caches, general purposes */ -#define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */ -#define ACPI_MTX_DEBUG_CMD_COMPLETE 6 /* AML debugger */ -#define ACPI_MTX_DEBUG_CMD_READY 7 /* AML debugger */ - -#define ACPI_MAX_MUTEX 7 -#define ACPI_NUM_MUTEX ACPI_MAX_MUTEX+1 - -#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER) -#ifdef DEFINE_ACPI_GLOBALS - -/* Debug names for the mutexes above */ - -static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = { - "ACPI_MTX_Interpreter", - "ACPI_MTX_Namespace", - "ACPI_MTX_Tables", - "ACPI_MTX_Events", - "ACPI_MTX_Caches", - "ACPI_MTX_Memory", - "ACPI_MTX_CommandComplete", - "ACPI_MTX_CommandReady" -}; - -#endif -#endif - -/* - * Predefined handles for spinlocks used within the subsystem. - * These spinlocks are created by acpi_ut_mutex_initialize - */ -#define ACPI_LOCK_GPES 0 -#define ACPI_LOCK_HARDWARE 1 - -#define ACPI_MAX_LOCK 1 -#define ACPI_NUM_LOCK ACPI_MAX_LOCK+1 - -/* Owner IDs are used to track namespace nodes for selective deletion */ - -typedef u8 acpi_owner_id; -#define ACPI_OWNER_ID_MAX 0xFF - -/* This Thread ID means that the mutex is not in use (unlocked) */ - -#define ACPI_MUTEX_NOT_ACQUIRED (acpi_thread_id) 0 - -/* Table for the global mutexes */ - -struct acpi_mutex_info { - acpi_mutex mutex; - u32 use_count; - acpi_thread_id thread_id; -}; - -/* Lock flag parameter for various interfaces */ - -#define ACPI_MTX_DO_NOT_LOCK 0 -#define ACPI_MTX_LOCK 1 - -/* Field access granularities */ - -#define ACPI_FIELD_BYTE_GRANULARITY 1 -#define ACPI_FIELD_WORD_GRANULARITY 2 -#define ACPI_FIELD_DWORD_GRANULARITY 4 -#define ACPI_FIELD_QWORD_GRANULARITY 8 - -#define ACPI_ENTRY_NOT_FOUND NULL - -/***************************************************************************** - * - * Namespace typedefs and structs - * - ****************************************************************************/ - -/* Operational modes of the AML interpreter/scanner */ - -typedef enum { - ACPI_IMODE_LOAD_PASS1 = 0x01, - ACPI_IMODE_LOAD_PASS2 = 0x02, - ACPI_IMODE_EXECUTE = 0x03 -} acpi_interpreter_mode; - -union acpi_name_union { - u32 integer; - char ascii[4]; -}; - -/* - * The Namespace Node describes a named object that appears in the AML. - * descriptor_type is used to differentiate between internal descriptors. - * - * The node is optimized for both 32-bit and 64-bit platforms: - * 20 bytes for the 32-bit case, 32 bytes for the 64-bit case. - * - * Note: The descriptor_type and Type fields must appear in the identical - * position in both the struct acpi_namespace_node and union acpi_operand_object - * structures. - */ -struct acpi_namespace_node { - union acpi_operand_object *object; /* Interpreter object */ - u8 descriptor_type; /* Differentiate object descriptor types */ - u8 type; /* ACPI Type associated with this name */ - u8 flags; /* Miscellaneous flags */ - acpi_owner_id owner_id; /* Node creator */ - union acpi_name_union name; /* ACPI Name, always 4 chars per ACPI spec */ - struct acpi_namespace_node *child; /* First child */ - struct acpi_namespace_node *peer; /* Peer. Parent if ANOBJ_END_OF_PEER_LIST set */ - - /* - * The following fields are used by the ASL compiler and disassembler only - */ -#ifdef ACPI_LARGE_NAMESPACE_NODE - union acpi_parse_object *op; - u32 value; - u32 length; -#endif -}; - -/* Namespace Node flags */ - -#define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */ -#define ANOBJ_TEMPORARY 0x02 /* Node is create by a method and is temporary */ -#define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */ -#define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */ -#define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */ -#define ANOBJ_EVALUATED 0x20 /* Set on first evaluation of node */ - -#define ANOBJ_IS_EXTERNAL 0x08 /* i_aSL only: This object created via External() */ -#define ANOBJ_METHOD_NO_RETVAL 0x10 /* i_aSL only: Method has no return value */ -#define ANOBJ_METHOD_SOME_NO_RETVAL 0x20 /* i_aSL only: Method has at least one return value */ -#define ANOBJ_IS_BIT_OFFSET 0x40 /* i_aSL only: Reference is a bit offset */ -#define ANOBJ_IS_REFERENCED 0x80 /* i_aSL only: Object was referenced */ - -/* - * ACPI Table Descriptor. One per ACPI table - */ -struct acpi_table_desc { - acpi_physical_address address; - struct acpi_table_header *pointer; - u32 length; /* Length fixed at 32 bits */ - union acpi_name_union signature; - acpi_owner_id owner_id; - u8 flags; -}; - -/* Flags for above */ - -#define ACPI_TABLE_ORIGIN_UNKNOWN (0) -#define ACPI_TABLE_ORIGIN_MAPPED (1) -#define ACPI_TABLE_ORIGIN_ALLOCATED (2) -#define ACPI_TABLE_ORIGIN_MASK (3) -#define ACPI_TABLE_IS_LOADED (4) - -/* One internal RSDT for table management */ - -struct acpi_internal_rsdt { - struct acpi_table_desc *tables; - u32 count; - u32 size; - u8 flags; -}; - -/* Flags for above */ - -#define ACPI_ROOT_ORIGIN_UNKNOWN (0) /* ~ORIGIN_ALLOCATED */ -#define ACPI_ROOT_ORIGIN_ALLOCATED (1) -#define ACPI_ROOT_ALLOW_RESIZE (2) - -/* Predefined (fixed) table indexes */ - -#define ACPI_TABLE_INDEX_DSDT (0) -#define ACPI_TABLE_INDEX_FACS (1) - -struct acpi_find_context { - char *search_for; - acpi_handle *list; - u32 *count; -}; - -struct acpi_ns_search_data { - struct acpi_namespace_node *node; -}; - -/* - * Predefined Namespace items - */ -struct acpi_predefined_names { - char *name; - u8 type; - char *val; -}; - -/* Object types used during package copies */ - -#define ACPI_COPY_TYPE_SIMPLE 0 -#define ACPI_COPY_TYPE_PACKAGE 1 - -/* Info structure used to convert external<->internal namestrings */ - -struct acpi_namestring_info { - const char *external_name; - const char *next_external_char; - char *internal_name; - u32 length; - u32 num_segments; - u32 num_carats; - u8 fully_qualified; -}; - -/* Field creation info */ - -struct acpi_create_field_info { - struct acpi_namespace_node *region_node; - struct acpi_namespace_node *field_node; - struct acpi_namespace_node *register_node; - struct acpi_namespace_node *data_register_node; - u32 bank_value; - u32 field_bit_position; - u32 field_bit_length; - u8 field_flags; - u8 attribute; - u8 field_type; -}; - -typedef -acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state); - -/* - * Bitmapped ACPI types. Used internally only - */ -#define ACPI_BTYPE_ANY 0x00000000 -#define ACPI_BTYPE_INTEGER 0x00000001 -#define ACPI_BTYPE_STRING 0x00000002 -#define ACPI_BTYPE_BUFFER 0x00000004 -#define ACPI_BTYPE_PACKAGE 0x00000008 -#define ACPI_BTYPE_FIELD_UNIT 0x00000010 -#define ACPI_BTYPE_DEVICE 0x00000020 -#define ACPI_BTYPE_EVENT 0x00000040 -#define ACPI_BTYPE_METHOD 0x00000080 -#define ACPI_BTYPE_MUTEX 0x00000100 -#define ACPI_BTYPE_REGION 0x00000200 -#define ACPI_BTYPE_POWER 0x00000400 -#define ACPI_BTYPE_PROCESSOR 0x00000800 -#define ACPI_BTYPE_THERMAL 0x00001000 -#define ACPI_BTYPE_BUFFER_FIELD 0x00002000 -#define ACPI_BTYPE_DDB_HANDLE 0x00004000 -#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000 -#define ACPI_BTYPE_REFERENCE 0x00010000 -#define ACPI_BTYPE_RESOURCE 0x00020000 - -#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER) - -#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE) -#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE) -#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR) -#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */ -#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF - -/* - * Information structure for ACPI predefined names. - * Each entry in the table contains the following items: - * - * Name - The ACPI reserved name - * param_count - Number of arguments to the method - * expected_return_btypes - Allowed type(s) for the return value - */ -struct acpi_name_info { - char name[ACPI_NAME_SIZE]; - u8 param_count; - u8 expected_btypes; -}; - -/* - * Secondary information structures for ACPI predefined objects that return - * package objects. This structure appears as the next entry in the table - * after the NAME_INFO structure above. - * - * The reason for this is to minimize the size of the predefined name table. - */ - -/* - * Used for ACPI_PTYPE1_FIXED, ACPI_PTYPE1_VAR, ACPI_PTYPE2, - * ACPI_PTYPE2_MIN, ACPI_PTYPE2_PKG_COUNT, ACPI_PTYPE2_COUNT - */ -struct acpi_package_info { - u8 type; - u8 object_type1; - u8 count1; - u8 object_type2; - u8 count2; - u8 reserved; -}; - -/* Used for ACPI_PTYPE2_FIXED */ - -struct acpi_package_info2 { - u8 type; - u8 count; - u8 object_type[4]; -}; - -/* Used for ACPI_PTYPE1_OPTION */ - -struct acpi_package_info3 { - u8 type; - u8 count; - u8 object_type[2]; - u8 tail_object_type; - u8 reserved; -}; - -union acpi_predefined_info { - struct acpi_name_info info; - struct acpi_package_info ret_info; - struct acpi_package_info2 ret_info2; - struct acpi_package_info3 ret_info3; -}; - -/* - * Bitmapped return value types - * Note: the actual data types must be contiguous, a loop in nspredef.c - * depends on this. - */ -#define ACPI_RTYPE_ANY 0x00 -#define ACPI_RTYPE_NONE 0x01 -#define ACPI_RTYPE_INTEGER 0x02 -#define ACPI_RTYPE_STRING 0x04 -#define ACPI_RTYPE_BUFFER 0x08 -#define ACPI_RTYPE_PACKAGE 0x10 -#define ACPI_RTYPE_REFERENCE 0x20 -#define ACPI_RTYPE_ALL 0x3F - -#define ACPI_NUM_RTYPES 5 /* Number of actual object types */ - -/***************************************************************************** - * - * Event typedefs and structs - * - ****************************************************************************/ - -/* Dispatch info for each GPE -- either a method or handler, cannot be both */ - -struct acpi_handler_info { - acpi_event_handler address; /* Address of handler, if any */ - void *context; /* Context to be passed to handler */ - struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */ -}; - -union acpi_gpe_dispatch_info { - struct acpi_namespace_node *method_node; /* Method node for this GPE level */ - struct acpi_handler_info *handler; -}; - -/* - * Information about a GPE, one per each GPE in an array. - * NOTE: Important to keep this struct as small as possible. - */ -struct acpi_gpe_event_info { - union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */ - struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ - u8 flags; /* Misc info about this GPE */ - u8 gpe_number; /* This GPE */ -}; - -/* Information about a GPE register pair, one per each status/enable pair in an array */ - -struct acpi_gpe_register_info { - struct acpi_generic_address status_address; /* Address of status reg */ - struct acpi_generic_address enable_address; /* Address of enable reg */ - u8 enable_for_wake; /* GPEs to keep enabled when sleeping */ - u8 enable_for_run; /* GPEs to keep enabled when running */ - u8 base_gpe_number; /* Base GPE number for this register */ -}; - -/* - * Information about a GPE register block, one per each installed block -- - * GPE0, GPE1, and one per each installed GPE Block Device. - */ -struct acpi_gpe_block_info { - struct acpi_namespace_node *node; - struct acpi_gpe_block_info *previous; - struct acpi_gpe_block_info *next; - struct acpi_gpe_xrupt_info *xrupt_block; /* Backpointer to interrupt block */ - struct acpi_gpe_register_info *register_info; /* One per GPE register pair */ - struct acpi_gpe_event_info *event_info; /* One for each GPE */ - struct acpi_generic_address block_address; /* Base address of the block */ - u32 register_count; /* Number of register pairs in block */ - u8 block_base_number; /* Base GPE number for this block */ -}; - -/* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */ - -struct acpi_gpe_xrupt_info { - struct acpi_gpe_xrupt_info *previous; - struct acpi_gpe_xrupt_info *next; - struct acpi_gpe_block_info *gpe_block_list_head; /* List of GPE blocks for this xrupt */ - u32 interrupt_number; /* System interrupt number */ -}; - -struct acpi_gpe_walk_info { - struct acpi_namespace_node *gpe_device; - struct acpi_gpe_block_info *gpe_block; -}; - -typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info * - gpe_xrupt_info, - struct acpi_gpe_block_info * - gpe_block); - -/* Information about each particular fixed event */ - -struct acpi_fixed_event_handler { - acpi_event_handler handler; /* Address of handler. */ - void *context; /* Context to be passed to handler */ -}; - -struct acpi_fixed_event_info { - u8 status_register_id; - u8 enable_register_id; - u16 status_bit_mask; - u16 enable_bit_mask; -}; - -/* Information used during field processing */ - -struct acpi_field_info { - u8 skip_field; - u8 field_flag; - u32 pkg_length; -}; - -/***************************************************************************** - * - * Generic "state" object for stacks - * - ****************************************************************************/ - -#define ACPI_CONTROL_NORMAL 0xC0 -#define ACPI_CONTROL_CONDITIONAL_EXECUTING 0xC1 -#define ACPI_CONTROL_PREDICATE_EXECUTING 0xC2 -#define ACPI_CONTROL_PREDICATE_FALSE 0xC3 -#define ACPI_CONTROL_PREDICATE_TRUE 0xC4 - -#define ACPI_STATE_COMMON \ - void *next; \ - u8 descriptor_type; /* To differentiate various internal objs */\ - u8 flags; \ - u16 value; \ - u16 state; - - /* There are 2 bytes available here until the next natural alignment boundary */ - -struct acpi_common_state { -ACPI_STATE_COMMON}; - -/* - * Update state - used to traverse complex objects such as packages - */ -struct acpi_update_state { - ACPI_STATE_COMMON union acpi_operand_object *object; -}; - -/* - * Pkg state - used to traverse nested package structures - */ -struct acpi_pkg_state { - ACPI_STATE_COMMON u16 index; - union acpi_operand_object *source_object; - union acpi_operand_object *dest_object; - struct acpi_walk_state *walk_state; - void *this_target_obj; - u32 num_packages; -}; - -/* - * Control state - one per if/else and while constructs. - * Allows nesting of these constructs - */ -struct acpi_control_state { - ACPI_STATE_COMMON u16 opcode; - union acpi_parse_object *predicate_op; - u8 *aml_predicate_start; /* Start of if/while predicate */ - u8 *package_end; /* End of if/while block */ -}; - -/* - * Scope state - current scope during namespace lookups - */ -struct acpi_scope_state { - ACPI_STATE_COMMON struct acpi_namespace_node *node; -}; - -struct acpi_pscope_state { - ACPI_STATE_COMMON u32 arg_count; /* Number of fixed arguments */ - union acpi_parse_object *op; /* Current op being parsed */ - u8 *arg_end; /* Current argument end */ - u8 *pkg_end; /* Current package end */ - u32 arg_list; /* Next argument to parse */ -}; - -/* - * Thread state - one per thread across multiple walk states. Multiple walk - * states are created when there are nested control methods executing. - */ -struct acpi_thread_state { - ACPI_STATE_COMMON u8 current_sync_level; /* Mutex Sync (nested acquire) level */ - struct acpi_walk_state *walk_state_list; /* Head of list of walk_states for this thread */ - union acpi_operand_object *acquired_mutex_list; /* List of all currently acquired mutexes */ - acpi_thread_id thread_id; /* Running thread ID */ -}; - -/* - * Result values - used to accumulate the results of nested - * AML arguments - */ -struct acpi_result_values { - ACPI_STATE_COMMON - union acpi_operand_object *obj_desc[ACPI_RESULTS_FRAME_OBJ_NUM]; -}; - -typedef -acpi_status(*acpi_parse_downwards) (struct acpi_walk_state * walk_state, - union acpi_parse_object ** out_op); - -typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state); - -/* - * Notify info - used to pass info to the deferred notify - * handler/dispatcher. - */ -struct acpi_notify_info { - ACPI_STATE_COMMON struct acpi_namespace_node *node; - union acpi_operand_object *handler_obj; -}; - -/* Generic state is union of structs above */ - -union acpi_generic_state { - struct acpi_common_state common; - struct acpi_control_state control; - struct acpi_update_state update; - struct acpi_scope_state scope; - struct acpi_pscope_state parse_scope; - struct acpi_pkg_state pkg; - struct acpi_thread_state thread; - struct acpi_result_values results; - struct acpi_notify_info notify; -}; - -/***************************************************************************** - * - * Interpreter typedefs and structs - * - ****************************************************************************/ - -typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state); - -/***************************************************************************** - * - * Parser typedefs and structs - * - ****************************************************************************/ - -/* - * AML opcode, name, and argument layout - */ -struct acpi_opcode_info { -#if defined(ACPI_DISASSEMBLER) || defined(ACPI_DEBUG_OUTPUT) - char *name; /* Opcode name (disassembler/debug only) */ -#endif - u32 parse_args; /* Grammar/Parse time arguments */ - u32 runtime_args; /* Interpret time arguments */ - u16 flags; /* Misc flags */ - u8 object_type; /* Corresponding internal object type */ - u8 class; /* Opcode class */ - u8 type; /* Opcode type */ -}; - -union acpi_parse_value { - acpi_integer integer; /* Integer constant (Up to 64 bits) */ - struct uint64_struct integer64; /* Structure overlay for 2 32-bit Dwords */ - u32 size; /* bytelist or field size */ - char *string; /* NULL terminated string */ - u8 *buffer; /* buffer or string */ - char *name; /* NULL terminated string */ - union acpi_parse_object *arg; /* arguments and contained ops */ -}; - -#define ACPI_PARSE_COMMON \ - union acpi_parse_object *parent; /* Parent op */\ - u8 descriptor_type; /* To differentiate various internal objs */\ - u8 flags; /* Type of Op */\ - u16 aml_opcode; /* AML opcode */\ - u32 aml_offset; /* Offset of declaration in AML */\ - union acpi_parse_object *next; /* Next op */\ - struct acpi_namespace_node *node; /* For use by interpreter */\ - union acpi_parse_value value; /* Value or args associated with the opcode */\ - u8 arg_list_length; /* Number of elements in the arg list */\ - ACPI_DISASM_ONLY_MEMBERS (\ - u8 disasm_flags; /* Used during AML disassembly */\ - u8 disasm_opcode; /* Subtype used for disassembly */\ - char aml_op_name[16]) /* Op name (debug only) */ - -#define ACPI_DASM_BUFFER 0x00 -#define ACPI_DASM_RESOURCE 0x01 -#define ACPI_DASM_STRING 0x02 -#define ACPI_DASM_UNICODE 0x03 -#define ACPI_DASM_EISAID 0x04 -#define ACPI_DASM_MATCHOP 0x05 -#define ACPI_DASM_LNOT_PREFIX 0x06 -#define ACPI_DASM_LNOT_SUFFIX 0x07 -#define ACPI_DASM_IGNORE 0x08 - -/* - * Generic operation (for example: If, While, Store) - */ -struct acpi_parse_obj_common { -ACPI_PARSE_COMMON}; - -/* - * Extended Op for named ops (Scope, Method, etc.), deferred ops (Methods and op_regions), - * and bytelists. - */ -struct acpi_parse_obj_named { - ACPI_PARSE_COMMON u8 *path; - u8 *data; /* AML body or bytelist data */ - u32 length; /* AML length */ - u32 name; /* 4-byte name or zero if no name */ -}; - -/* This version is used by the i_aSL compiler only */ - -#define ACPI_MAX_PARSEOP_NAME 20 - -struct acpi_parse_obj_asl { - ACPI_PARSE_COMMON union acpi_parse_object *child; - union acpi_parse_object *parent_method; - char *filename; - char *external_name; - char *namepath; - char name_seg[4]; - u32 extra_value; - u32 column; - u32 line_number; - u32 logical_line_number; - u32 logical_byte_offset; - u32 end_line; - u32 end_logical_line; - u32 acpi_btype; - u32 aml_length; - u32 aml_subtree_length; - u32 final_aml_length; - u32 final_aml_offset; - u32 compile_flags; - u16 parse_opcode; - u8 aml_opcode_length; - u8 aml_pkg_len_bytes; - u8 extra; - char parse_op_name[ACPI_MAX_PARSEOP_NAME]; -}; - -union acpi_parse_object { - struct acpi_parse_obj_common common; - struct acpi_parse_obj_named named; - struct acpi_parse_obj_asl asl; -}; - -/* - * Parse state - one state per parser invocation and each control - * method. - */ -struct acpi_parse_state { - u8 *aml_start; /* First AML byte */ - u8 *aml; /* Next AML byte */ - u8 *aml_end; /* (last + 1) AML byte */ - u8 *pkg_start; /* Current package begin */ - u8 *pkg_end; /* Current package end */ - union acpi_parse_object *start_op; /* Root of parse tree */ - struct acpi_namespace_node *start_node; - union acpi_generic_state *scope; /* Current scope */ - union acpi_parse_object *start_scope; - u32 aml_size; -}; - -/* Parse object flags */ - -#define ACPI_PARSEOP_GENERIC 0x01 -#define ACPI_PARSEOP_NAMED 0x02 -#define ACPI_PARSEOP_DEFERRED 0x04 -#define ACPI_PARSEOP_BYTELIST 0x08 -#define ACPI_PARSEOP_IN_STACK 0x10 -#define ACPI_PARSEOP_TARGET 0x20 -#define ACPI_PARSEOP_IN_CACHE 0x80 - -/* Parse object disasm_flags */ - -#define ACPI_PARSEOP_IGNORE 0x01 -#define ACPI_PARSEOP_PARAMLIST 0x02 -#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04 -#define ACPI_PARSEOP_SPECIAL 0x10 - -/***************************************************************************** - * - * Hardware (ACPI registers) and PNP - * - ****************************************************************************/ - -#define PCI_ROOT_HID_STRING "PNP0A03" -#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" - -struct acpi_bit_register_info { - u8 parent_register; - u8 bit_position; - u16 access_bit_mask; -}; - -/* - * Some ACPI registers have bits that must be ignored -- meaning that they - * must be preserved. - */ -#define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800 /* Bit 11 */ -#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0200 /* Bit 9 (whatever) */ - -/* - * Register IDs - * These are the full ACPI registers - */ -#define ACPI_REGISTER_PM1_STATUS 0x01 -#define ACPI_REGISTER_PM1_ENABLE 0x02 -#define ACPI_REGISTER_PM1_CONTROL 0x03 -#define ACPI_REGISTER_PM1A_CONTROL 0x04 -#define ACPI_REGISTER_PM1B_CONTROL 0x05 -#define ACPI_REGISTER_PM2_CONTROL 0x06 -#define ACPI_REGISTER_PM_TIMER 0x07 -#define ACPI_REGISTER_PROCESSOR_BLOCK 0x08 -#define ACPI_REGISTER_SMI_COMMAND_BLOCK 0x09 - -/* Masks used to access the bit_registers */ - -#define ACPI_BITMASK_TIMER_STATUS 0x0001 -#define ACPI_BITMASK_BUS_MASTER_STATUS 0x0010 -#define ACPI_BITMASK_GLOBAL_LOCK_STATUS 0x0020 -#define ACPI_BITMASK_POWER_BUTTON_STATUS 0x0100 -#define ACPI_BITMASK_SLEEP_BUTTON_STATUS 0x0200 -#define ACPI_BITMASK_RT_CLOCK_STATUS 0x0400 -#define ACPI_BITMASK_PCIEXP_WAKE_STATUS 0x4000 /* ACPI 3.0 */ -#define ACPI_BITMASK_WAKE_STATUS 0x8000 - -#define ACPI_BITMASK_ALL_FIXED_STATUS (\ - ACPI_BITMASK_TIMER_STATUS | \ - ACPI_BITMASK_BUS_MASTER_STATUS | \ - ACPI_BITMASK_GLOBAL_LOCK_STATUS | \ - ACPI_BITMASK_POWER_BUTTON_STATUS | \ - ACPI_BITMASK_SLEEP_BUTTON_STATUS | \ - ACPI_BITMASK_RT_CLOCK_STATUS | \ - ACPI_BITMASK_WAKE_STATUS) - -#define ACPI_BITMASK_TIMER_ENABLE 0x0001 -#define ACPI_BITMASK_GLOBAL_LOCK_ENABLE 0x0020 -#define ACPI_BITMASK_POWER_BUTTON_ENABLE 0x0100 -#define ACPI_BITMASK_SLEEP_BUTTON_ENABLE 0x0200 -#define ACPI_BITMASK_RT_CLOCK_ENABLE 0x0400 -#define ACPI_BITMASK_PCIEXP_WAKE_DISABLE 0x4000 /* ACPI 3.0 */ - -#define ACPI_BITMASK_SCI_ENABLE 0x0001 -#define ACPI_BITMASK_BUS_MASTER_RLD 0x0002 -#define ACPI_BITMASK_GLOBAL_LOCK_RELEASE 0x0004 -#define ACPI_BITMASK_SLEEP_TYPE_X 0x1C00 -#define ACPI_BITMASK_SLEEP_ENABLE 0x2000 - -#define ACPI_BITMASK_ARB_DISABLE 0x0001 - -/* Raw bit position of each bit_register */ - -#define ACPI_BITPOSITION_TIMER_STATUS 0x00 -#define ACPI_BITPOSITION_BUS_MASTER_STATUS 0x04 -#define ACPI_BITPOSITION_GLOBAL_LOCK_STATUS 0x05 -#define ACPI_BITPOSITION_POWER_BUTTON_STATUS 0x08 -#define ACPI_BITPOSITION_SLEEP_BUTTON_STATUS 0x09 -#define ACPI_BITPOSITION_RT_CLOCK_STATUS 0x0A -#define ACPI_BITPOSITION_PCIEXP_WAKE_STATUS 0x0E /* ACPI 3.0 */ -#define ACPI_BITPOSITION_WAKE_STATUS 0x0F - -#define ACPI_BITPOSITION_TIMER_ENABLE 0x00 -#define ACPI_BITPOSITION_GLOBAL_LOCK_ENABLE 0x05 -#define ACPI_BITPOSITION_POWER_BUTTON_ENABLE 0x08 -#define ACPI_BITPOSITION_SLEEP_BUTTON_ENABLE 0x09 -#define ACPI_BITPOSITION_RT_CLOCK_ENABLE 0x0A -#define ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE 0x0E /* ACPI 3.0 */ - -#define ACPI_BITPOSITION_SCI_ENABLE 0x00 -#define ACPI_BITPOSITION_BUS_MASTER_RLD 0x01 -#define ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE 0x02 -#define ACPI_BITPOSITION_SLEEP_TYPE_X 0x0A -#define ACPI_BITPOSITION_SLEEP_ENABLE 0x0D - -#define ACPI_BITPOSITION_ARB_DISABLE 0x00 - -/***************************************************************************** - * - * Resource descriptors - * - ****************************************************************************/ - -/* resource_type values */ - -#define ACPI_ADDRESS_TYPE_MEMORY_RANGE 0 -#define ACPI_ADDRESS_TYPE_IO_RANGE 1 -#define ACPI_ADDRESS_TYPE_BUS_NUMBER_RANGE 2 - -/* Resource descriptor types and masks */ - -#define ACPI_RESOURCE_NAME_LARGE 0x80 -#define ACPI_RESOURCE_NAME_SMALL 0x00 - -#define ACPI_RESOURCE_NAME_SMALL_MASK 0x78 /* Bits 6:3 contain the type */ -#define ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK 0x07 /* Bits 2:0 contain the length */ -#define ACPI_RESOURCE_NAME_LARGE_MASK 0x7F /* Bits 6:0 contain the type */ - -/* - * Small resource descriptor "names" as defined by the ACPI specification. - * Note: Bits 2:0 are used for the descriptor length - */ -#define ACPI_RESOURCE_NAME_IRQ 0x20 -#define ACPI_RESOURCE_NAME_DMA 0x28 -#define ACPI_RESOURCE_NAME_START_DEPENDENT 0x30 -#define ACPI_RESOURCE_NAME_END_DEPENDENT 0x38 -#define ACPI_RESOURCE_NAME_IO 0x40 -#define ACPI_RESOURCE_NAME_FIXED_IO 0x48 -#define ACPI_RESOURCE_NAME_RESERVED_S1 0x50 -#define ACPI_RESOURCE_NAME_RESERVED_S2 0x58 -#define ACPI_RESOURCE_NAME_RESERVED_S3 0x60 -#define ACPI_RESOURCE_NAME_RESERVED_S4 0x68 -#define ACPI_RESOURCE_NAME_VENDOR_SMALL 0x70 -#define ACPI_RESOURCE_NAME_END_TAG 0x78 - -/* - * Large resource descriptor "names" as defined by the ACPI specification. - * Note: includes the Large Descriptor bit in bit[7] - */ -#define ACPI_RESOURCE_NAME_MEMORY24 0x81 -#define ACPI_RESOURCE_NAME_GENERIC_REGISTER 0x82 -#define ACPI_RESOURCE_NAME_RESERVED_L1 0x83 -#define ACPI_RESOURCE_NAME_VENDOR_LARGE 0x84 -#define ACPI_RESOURCE_NAME_MEMORY32 0x85 -#define ACPI_RESOURCE_NAME_FIXED_MEMORY32 0x86 -#define ACPI_RESOURCE_NAME_ADDRESS32 0x87 -#define ACPI_RESOURCE_NAME_ADDRESS16 0x88 -#define ACPI_RESOURCE_NAME_EXTENDED_IRQ 0x89 -#define ACPI_RESOURCE_NAME_ADDRESS64 0x8A -#define ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 0x8B -#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8B - -/***************************************************************************** - * - * Miscellaneous - * - ****************************************************************************/ - -#define ACPI_ASCII_ZERO 0x30 - -/***************************************************************************** - * - * Debugger - * - ****************************************************************************/ - -struct acpi_db_method_info { - acpi_handle main_thread_gate; - acpi_handle thread_complete_gate; - u32 *threads; - u32 num_threads; - u32 num_created; - u32 num_completed; - - char *name; - u32 flags; - u32 num_loops; - char pathname[128]; - char **args; - - /* - * Arguments to be passed to method for the command - * Threads - - * the Number of threads, ID of current thread and - * Index of current thread inside all them created. - */ - char init_args; - char *arguments[4]; - char num_threads_str[11]; - char id_of_thread_str[11]; - char index_of_thread_str[11]; -}; - -struct acpi_integrity_info { - u32 nodes; - u32 objects; -}; - -#define ACPI_DB_REDIRECTABLE_OUTPUT 0x01 -#define ACPI_DB_CONSOLE_OUTPUT 0x02 -#define ACPI_DB_DUPLICATE_OUTPUT 0x03 - -/***************************************************************************** - * - * Debug - * - ****************************************************************************/ - -/* Entry for a memory allocation (debug only) */ - -#define ACPI_MEM_MALLOC 0 -#define ACPI_MEM_CALLOC 1 -#define ACPI_MAX_MODULE_NAME 16 - -#define ACPI_COMMON_DEBUG_MEM_HEADER \ - struct acpi_debug_mem_block *previous; \ - struct acpi_debug_mem_block *next; \ - u32 size; \ - u32 component; \ - u32 line; \ - char module[ACPI_MAX_MODULE_NAME]; \ - u8 alloc_type; - -struct acpi_debug_mem_header { -ACPI_COMMON_DEBUG_MEM_HEADER}; - -struct acpi_debug_mem_block { - ACPI_COMMON_DEBUG_MEM_HEADER u64 user_space; -}; - -#define ACPI_MEM_LIST_GLOBAL 0 -#define ACPI_MEM_LIST_NSNODE 1 -#define ACPI_MEM_LIST_MAX 1 -#define ACPI_NUM_MEM_LISTS 2 - -struct acpi_memory_list { - char *list_name; - void *list_head; - u16 object_size; - u16 max_depth; - u16 current_depth; - u16 link_offset; - -#ifdef ACPI_DBG_TRACK_ALLOCATIONS - - /* Statistics for debug memory tracking only */ - - u32 total_allocated; - u32 total_freed; - u32 max_occupied; - u32 total_size; - u32 current_total_size; - u32 requests; - u32 hits; -#endif -}; - -#endif /* __ACLOCAL_H__ */ diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h deleted file mode 100644 index a597207e283..00000000000 --- a/include/acpi/acmacros.h +++ /dev/null @@ -1,693 +0,0 @@ -/****************************************************************************** - * - * Name: acmacros.h - C macros for the entire subsystem. - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACMACROS_H__ -#define __ACMACROS_H__ - -/* - * Data manipulation macros - */ -#define ACPI_LOWORD(l) ((u16)(u32)(l)) -#define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) -#define ACPI_LOBYTE(l) ((u8)(u16)(l)) -#define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) - -#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) -#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) -#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) -#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) - -/* Size calculation */ - -#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) - -/* - * Extract data using a pointer. Any more than a byte and we - * get into potential aligment issues -- see the STORE macros below. - * Use with care. - */ -#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr) -#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr) -#define ACPI_GET32(ptr) *ACPI_CAST_PTR (u32, ptr) -#define ACPI_GET64(ptr) *ACPI_CAST_PTR (u64, ptr) -#define ACPI_SET8(ptr) *ACPI_CAST_PTR (u8, ptr) -#define ACPI_SET16(ptr) *ACPI_CAST_PTR (u16, ptr) -#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr) -#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr) - -/* - * Pointer manipulation - */ -#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) -#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) -#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) -#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) - -/* Pointer/Integer type conversions */ - -#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i) -#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) -#define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) -#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) -#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) - -#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED -#define ACPI_COMPARE_NAME(a, b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) -#else -#define ACPI_COMPARE_NAME(a, b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) -#endif - -/* - * Full 64-bit integer must be available on both 32-bit and 64-bit platforms - */ -struct acpi_integer_overlay { - u32 lo_dword; - u32 hi_dword; -}; - -#define ACPI_LODWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword) -#define ACPI_HIDWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword) - -/* - * printf() format helpers - */ - -/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */ - -#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i) - -#if ACPI_MACHINE_WIDTH == 64 -#define ACPI_FORMAT_NATIVE_UINT(i) ACPI_FORMAT_UINT64(i) -#else -#define ACPI_FORMAT_NATIVE_UINT(i) 0, (i) -#endif - -/* - * Macros for moving data around to/from buffers that are possibly unaligned. - * If the hardware supports the transfer of unaligned data, just do the store. - * Otherwise, we have to move one byte at a time. - */ -#ifdef ACPI_BIG_ENDIAN -/* - * Macros for big-endian machines - */ - -/* These macros reverse the bytes during the move, converting little-endian to big endian */ - - /* Big Endian <== Little Endian */ - /* Hi...Lo Lo...Hi */ -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ - -#define ACPI_MOVE_64_TO_64(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} -#else -/* - * Macros for little-endian machines - */ - -#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED - -/* The hardware supports unaligned transfers, just do the little-endian move */ - -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_32(d, s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_64(d, s) *(u64 *)(void *)(d) = *(u16 *)(void *)(s) - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_32_TO_32(d, s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) -#define ACPI_MOVE_32_TO_64(d, s) *(u64 *)(void *)(d) = *(u32 *)(void *)(s) - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d, s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s) - -#else -/* - * The hardware does not support unaligned transfers. We must move the - * data one byte at a time. These macros work whether the source or - * the destination (or both) is/are unaligned. (Little-endian move) - */ - -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];} - -#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} -#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];} - -#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];} -#endif -#endif - -/* Macros based on machine integer width */ - -#if ACPI_MACHINE_WIDTH == 32 -#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_32_TO_16(d, s) - -#elif ACPI_MACHINE_WIDTH == 64 -#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_64_TO_16(d, s) - -#else -#error unknown ACPI_MACHINE_WIDTH -#endif - -/* - * Fast power-of-two math macros for non-optimized compilers - */ -#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2))) -#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2))) -#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1))) - -#define ACPI_DIV_2(a) _ACPI_DIV(a, 1) -#define ACPI_MUL_2(a) _ACPI_MUL(a, 1) -#define ACPI_MOD_2(a) _ACPI_MOD(a, 2) - -#define ACPI_DIV_4(a) _ACPI_DIV(a, 2) -#define ACPI_MUL_4(a) _ACPI_MUL(a, 2) -#define ACPI_MOD_4(a) _ACPI_MOD(a, 4) - -#define ACPI_DIV_8(a) _ACPI_DIV(a, 3) -#define ACPI_MUL_8(a) _ACPI_MUL(a, 3) -#define ACPI_MOD_8(a) _ACPI_MOD(a, 8) - -#define ACPI_DIV_16(a) _ACPI_DIV(a, 4) -#define ACPI_MUL_16(a) _ACPI_MUL(a, 4) -#define ACPI_MOD_16(a) _ACPI_MOD(a, 16) - -#define ACPI_DIV_32(a) _ACPI_DIV(a, 5) -#define ACPI_MUL_32(a) _ACPI_MUL(a, 5) -#define ACPI_MOD_32(a) _ACPI_MOD(a, 32) - -/* - * Rounding macros (Power of two boundaries only) - */ -#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \ - (~(((acpi_size) boundary)-1))) - -#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \ - (((acpi_size) boundary)-1)) & \ - (~(((acpi_size) boundary)-1))) - -/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */ - -#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a, 4) -#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a, 8) -#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a, sizeof(acpi_size)) - -#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a, 4) -#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a, 8) -#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a, sizeof(acpi_size)) - -#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) -#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) - -#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) - -/* Generic (non-power-of-two) rounding */ - -#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary)) - -#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1)) - -/* - * Bitmask creation - * Bit positions start at zero. - * MASK_BITS_ABOVE creates a mask starting AT the position and above - * MASK_BITS_BELOW creates a mask starting one bit BELOW the position - */ -#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position)))) -#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position))) - -/* Bitfields within ACPI registers */ - -#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask) -#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) - -#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask)) - -/* - * An struct acpi_namespace_node can appear in some contexts - * where a pointer to an union acpi_operand_object can also - * appear. This macro is used to distinguish them. - * - * The "Descriptor" field is the first field in both structures. - */ -#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type) -#define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t) - -/* Macro to test the object type */ - -#define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type) - -/* - * Macros for the master AML opcode table - */ -#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) -#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \ - {name, (u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type} -#else -#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \ - {(u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type} -#endif - -#ifdef ACPI_DISASSEMBLER -#define ACPI_DISASM_ONLY_MEMBERS(a) a; -#else -#define ACPI_DISASM_ONLY_MEMBERS(a) -#endif - -#define ARG_TYPE_WIDTH 5 -#define ARG_1(x) ((u32)(x)) -#define ARG_2(x) ((u32)(x) << (1 * ARG_TYPE_WIDTH)) -#define ARG_3(x) ((u32)(x) << (2 * ARG_TYPE_WIDTH)) -#define ARG_4(x) ((u32)(x) << (3 * ARG_TYPE_WIDTH)) -#define ARG_5(x) ((u32)(x) << (4 * ARG_TYPE_WIDTH)) -#define ARG_6(x) ((u32)(x) << (5 * ARG_TYPE_WIDTH)) - -#define ARGI_LIST1(a) (ARG_1(a)) -#define ARGI_LIST2(a, b) (ARG_1(b)|ARG_2(a)) -#define ARGI_LIST3(a, b, c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) -#define ARGI_LIST4(a, b, c, d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) -#define ARGI_LIST5(a, b, c, d, e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) -#define ARGI_LIST6(a, b, c, d, e, f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) - -#define ARGP_LIST1(a) (ARG_1(a)) -#define ARGP_LIST2(a, b) (ARG_1(a)|ARG_2(b)) -#define ARGP_LIST3(a, b, c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) -#define ARGP_LIST4(a, b, c, d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) -#define ARGP_LIST5(a, b, c, d, e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) -#define ARGP_LIST6(a, b, c, d, e, f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) - -#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F)) -#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH)) - -#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES) -/* - * Module name is include in both debug and non-debug versions primarily for - * error messages. The __FILE__ macro is not very useful for this, because it - * often includes the entire pathname to the module - */ -#define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name; -#else -#define ACPI_MODULE_NAME(name) -#endif - -/* - * Ascii error messages can be configured out - */ -#ifndef ACPI_NO_ERROR_MESSAGES -#define AE_INFO _acpi_module_name, __LINE__ - -/* - * Error reporting. Callers module and line number are inserted by AE_INFO, - * the plist contains a set of parens to allow variable-length lists. - * These macros are used for both the debug and non-debug versions of the code. - */ -#define ACPI_INFO(plist) acpi_ut_info plist -#define ACPI_WARNING(plist) acpi_ut_warning plist -#define ACPI_EXCEPTION(plist) acpi_ut_exception plist -#define ACPI_ERROR(plist) acpi_ut_error plist -#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e); -#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e); - -#else - -/* No error messages */ - -#define ACPI_INFO(plist) -#define ACPI_WARNING(plist) -#define ACPI_EXCEPTION(plist) -#define ACPI_ERROR(plist) -#define ACPI_ERROR_NAMESPACE(s, e) -#define ACPI_ERROR_METHOD(s, n, p, e) -#endif - -/* - * Debug macros that are conditionally compiled - */ -#ifdef ACPI_DEBUG_OUTPUT - -/* - * Common parameters used for debug output functions: - * line number, function name, module(file) name, component ID - */ -#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT - -/* - * Function entry tracing - */ - -/* - * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, - * define it now. This is the case where there the compiler does not support - * a __func__ macro or equivalent. - */ -#ifndef ACPI_GET_FUNCTION_NAME -#define ACPI_GET_FUNCTION_NAME _acpi_function_name -/* - * The Name parameter should be the procedure name as a quoted string. - * The function name is also used by the function exit macros below. - * Note: (const char) is used to be compatible with the debug interfaces - * and macros such as __func__. - */ -#define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name; - -#else -/* Compiler supports __func__ (or equivalent) -- Ignore this macro */ - -#define ACPI_FUNCTION_NAME(name) -#endif - -#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE - -#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace(ACPI_DEBUG_PARAMETERS) -#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS, (void *)b) -#define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS, (u32)b) -#define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS, (char *)b) - -#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr() - -/* - * Function exit tracing. - * WARNING: These macros include a return statement. This is usually considered - * bad form, but having a separate exit macro is very ugly and difficult to maintain. - * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros - * so that "_AcpiFunctionName" is defined. - * - * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining - * about these constructs. - */ -#ifdef ACPI_USE_DO_WHILE_0 -#define ACPI_DO_WHILE0(a) do a while(0) -#else -#define ACPI_DO_WHILE0(a) a -#endif - -#define return_VOID ACPI_DO_WHILE0 ({ \ - acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \ - return;}) -/* - * There are two versions of most of the return macros. The default version is - * safer, since it avoids side-effects by guaranteeing that the argument will - * not be evaluated twice. - * - * A less-safe version of the macros is provided for optional use if the - * compiler uses excessive CPU stack (for example, this may happen in the - * debug case if code optimzation is disabled.) - */ -#ifndef ACPI_SIMPLE_RETURN_MACROS - -#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ - register acpi_status _s = (s); \ - acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \ - return (_s); }) -#define return_PTR(s) ACPI_DO_WHILE0 ({ \ - register void *_s = (void *) (s); \ - acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \ - return (_s); }) -#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ - register acpi_integer _s = (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \ - return (_s); }) -#define return_UINT8(s) ACPI_DO_WHILE0 ({ \ - register u8 _s = (u8) (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \ - return (_s); }) -#define return_UINT32(s) ACPI_DO_WHILE0 ({ \ - register u32 _s = (u32) (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \ - return (_s); }) -#else /* Use original less-safe macros */ - -#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \ - return((s)); }) -#define return_PTR(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \ - return((s)); }) -#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \ - return((s)); }) -#define return_UINT8(s) return_VALUE(s) -#define return_UINT32(s) return_VALUE(s) - -#endif /* ACPI_SIMPLE_RETURN_MACROS */ - -#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */ - -#define ACPI_FUNCTION_TRACE(a) -#define ACPI_FUNCTION_TRACE_PTR(a,b) -#define ACPI_FUNCTION_TRACE_U32(a,b) -#define ACPI_FUNCTION_TRACE_STR(a,b) -#define ACPI_FUNCTION_EXIT -#define ACPI_FUNCTION_STATUS_EXIT(s) -#define ACPI_FUNCTION_VALUE_EXIT(s) -#define ACPI_FUNCTION_TRACE(a) -#define ACPI_FUNCTION_ENTRY() - -#define return_VOID return -#define return_ACPI_STATUS(s) return(s) -#define return_VALUE(s) return(s) -#define return_UINT8(s) return(s) -#define return_UINT32(s) return(s) -#define return_PTR(s) return(s) - -#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */ - -/* Conditional execution */ - -#define ACPI_DEBUG_EXEC(a) a -#define ACPI_NORMAL_EXEC(a) - -#define ACPI_DEBUG_DEFINE(a) a; -#define ACPI_DEBUG_ONLY_MEMBERS(a) a; -#define _VERBOSE_STRUCTURES - -/* Stack and buffer dumping */ - -#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0) -#define ACPI_DUMP_OPERANDS(a, b, c) acpi_ex_dump_operands(a, b, c) - -#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b) -#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d) -#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a) -#define ACPI_DUMP_BUFFER(a, b) acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT) - -/* - * Master debug print macros - * Print iff: - * 1) Debug print for the current component is enabled - * 2) Debug error level or trace level for the print statement is enabled - */ -#define ACPI_DEBUG_PRINT(plist) acpi_ut_debug_print plist -#define ACPI_DEBUG_PRINT_RAW(plist) acpi_ut_debug_print_raw plist - -#else -/* - * This is the non-debug case -- make everything go away, - * leaving no executable debug code! - */ -#define ACPI_DEBUG_EXEC(a) -#define ACPI_NORMAL_EXEC(a) a; - -#define ACPI_DEBUG_DEFINE(a) do { } while(0) -#define ACPI_DEBUG_ONLY_MEMBERS(a) do { } while(0) -#define ACPI_FUNCTION_NAME(a) do { } while(0) -#define ACPI_FUNCTION_TRACE(a) do { } while(0) -#define ACPI_FUNCTION_TRACE_PTR(a, b) do { } while(0) -#define ACPI_FUNCTION_TRACE_U32(a, b) do { } while(0) -#define ACPI_FUNCTION_TRACE_STR(a, b) do { } while(0) -#define ACPI_FUNCTION_EXIT do { } while(0) -#define ACPI_FUNCTION_STATUS_EXIT(s) do { } while(0) -#define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0) -#define ACPI_FUNCTION_ENTRY() do { } while(0) -#define ACPI_DUMP_STACK_ENTRY(a) do { } while(0) -#define ACPI_DUMP_OPERANDS(a, b, c) do { } while(0) -#define ACPI_DUMP_ENTRY(a, b) do { } while(0) -#define ACPI_DUMP_TABLES(a, b) do { } while(0) -#define ACPI_DUMP_PATHNAME(a, b, c, d) do { } while(0) -#define ACPI_DUMP_RESOURCE_LIST(a) do { } while(0) -#define ACPI_DUMP_BUFFER(a, b) do { } while(0) -#define ACPI_DEBUG_PRINT(pl) do { } while(0) -#define ACPI_DEBUG_PRINT_RAW(pl) do { } while(0) - -#define return_VOID return -#define return_ACPI_STATUS(s) return(s) -#define return_VALUE(s) return(s) -#define return_UINT8(s) return(s) -#define return_UINT32(s) return(s) -#define return_PTR(s) return(s) - -#endif - -/* - * Some code only gets executed when the debugger is built in. - * Note that this is entirely independent of whether the - * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. - */ -#ifdef ACPI_DEBUGGER -#define ACPI_DEBUGGER_EXEC(a) a -#else -#define ACPI_DEBUGGER_EXEC(a) -#endif - -#ifdef ACPI_DEBUG_OUTPUT -/* - * 1) Set name to blanks - * 2) Copy the object name - */ -#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\ - ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name)) -#else - -#define ACPI_ADD_OBJECT_NAME(a,b) -#endif - -/* - * Memory allocation tracking (DEBUG ONLY) - */ -#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__ - -#ifndef ACPI_DBG_TRACK_ALLOCATIONS - -/* Memory allocation */ - -#ifndef ACPI_ALLOCATE -#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS) -#endif -#ifndef ACPI_ALLOCATE_ZEROED -#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS) -#endif -#ifndef ACPI_FREE -#define ACPI_FREE(a) acpio_os_free(a) -#endif -#define ACPI_MEM_TRACKING(a) - -#else - -/* Memory allocation */ - -#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS) -#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS) -#define ACPI_FREE(a) acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS) -#define ACPI_MEM_TRACKING(a) a - -#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ - -/* Preemption point */ -#ifndef ACPI_PREEMPTION_POINT -#define ACPI_PREEMPTION_POINT() /* no preemption */ -#endif - -#endif /* ACMACROS_H */ diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h deleted file mode 100644 index db4e6f67785..00000000000 --- a/include/acpi/acnamesp.h +++ /dev/null @@ -1,321 +0,0 @@ -/****************************************************************************** - * - * Name: acnamesp.h - Namespace subcomponent prototypes and defines - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACNAMESP_H__ -#define __ACNAMESP_H__ - -/* To search the entire name space, pass this as search_base */ - -#define ACPI_NS_ALL ((acpi_handle)0) - -/* - * Elements of acpi_ns_properties are bit significant - * and should be one-to-one with values of acpi_object_type - */ -#define ACPI_NS_NORMAL 0 -#define ACPI_NS_NEWSCOPE 1 /* a definition of this type opens a name scope */ -#define ACPI_NS_LOCAL 2 /* suppress search of enclosing scopes */ - -/* Flags for acpi_ns_lookup, acpi_ns_search_and_enter */ - -#define ACPI_NS_NO_UPSEARCH 0 -#define ACPI_NS_SEARCH_PARENT 0x01 -#define ACPI_NS_DONT_OPEN_SCOPE 0x02 -#define ACPI_NS_NO_PEER_SEARCH 0x04 -#define ACPI_NS_ERROR_IF_FOUND 0x08 -#define ACPI_NS_PREFIX_IS_SCOPE 0x10 -#define ACPI_NS_EXTERNAL 0x20 -#define ACPI_NS_TEMPORARY 0x40 - -/* Flags for acpi_ns_walk_namespace */ - -#define ACPI_NS_WALK_NO_UNLOCK 0 -#define ACPI_NS_WALK_UNLOCK 0x01 -#define ACPI_NS_WALK_TEMP_NODES 0x02 - -/* - * nsinit - Namespace initialization - */ -acpi_status acpi_ns_initialize_objects(void); - -acpi_status acpi_ns_initialize_devices(void); - -/* - * nsload - Namespace loading - */ -acpi_status acpi_ns_load_namespace(void); - -acpi_status -acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node); - -/* - * nswalk - walk the namespace - */ -acpi_status -acpi_ns_walk_namespace(acpi_object_type type, - acpi_handle start_object, - u32 max_depth, - u32 flags, - acpi_walk_callback user_function, - void *context, void **return_value); - -struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node - *parent, struct acpi_namespace_node - *child); - -/* - * nsparse - table parsing - */ -acpi_status -acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node); - -acpi_status -acpi_ns_one_complete_parse(u32 pass_number, - u32 table_index, - struct acpi_namespace_node *start_node); - -/* - * nsaccess - Top-level namespace access - */ -acpi_status acpi_ns_root_initialize(void); - -acpi_status -acpi_ns_lookup(union acpi_generic_state *scope_info, - char *name, - acpi_object_type type, - acpi_interpreter_mode interpreter_mode, - u32 flags, - struct acpi_walk_state *walk_state, - struct acpi_namespace_node **ret_node); - -/* - * nsalloc - Named object allocation/deallocation - */ -struct acpi_namespace_node *acpi_ns_create_node(u32 name); - -void acpi_ns_delete_node(struct acpi_namespace_node *node); - -void -acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_handle); - -void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id); - -void acpi_ns_detach_object(struct acpi_namespace_node *node); - -void acpi_ns_delete_children(struct acpi_namespace_node *parent); - -int acpi_ns_compare_names(char *name1, char *name2); - -/* - * nsdump - Namespace dump/print utilities - */ -#ifdef ACPI_FUTURE_USAGE -void acpi_ns_dump_tables(acpi_handle search_base, u32 max_depth); -#endif /* ACPI_FUTURE_USAGE */ - -void acpi_ns_dump_entry(acpi_handle handle, u32 debug_level); - -void -acpi_ns_dump_pathname(acpi_handle handle, char *msg, u32 level, u32 component); - -void acpi_ns_print_pathname(u32 num_segments, char *pathname); - -acpi_status -acpi_ns_dump_one_object(acpi_handle obj_handle, - u32 level, void *context, void **return_value); - -#ifdef ACPI_FUTURE_USAGE -void -acpi_ns_dump_objects(acpi_object_type type, - u8 display_type, - u32 max_depth, - acpi_owner_id owner_id, acpi_handle start_handle); -#endif /* ACPI_FUTURE_USAGE */ - -/* - * nseval - Namespace evaluation functions - */ -acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info); - -/* - * nspredef - Support for predefined/reserved names - */ -acpi_status -acpi_ns_check_predefined_names(struct acpi_namespace_node *node, - union acpi_operand_object *return_object); - -const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct - acpi_namespace_node - *node); - -void -acpi_ns_check_parameter_count(char *pathname, - struct acpi_namespace_node *node, - const union acpi_predefined_info *info); - -/* - * nsnames - Name and Scope manipulation - */ -u32 acpi_ns_opens_scope(acpi_object_type type); - -acpi_status -acpi_ns_build_external_path(struct acpi_namespace_node *node, - acpi_size size, char *name_buffer); - -char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node); - -char *acpi_ns_name_of_current_scope(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ns_handle_to_pathname(acpi_handle target_handle, - struct acpi_buffer *buffer); - -u8 -acpi_ns_pattern_match(struct acpi_namespace_node *obj_node, char *search_for); - -acpi_status -acpi_ns_get_node(struct acpi_namespace_node *prefix_node, - const char *external_pathname, - u32 flags, struct acpi_namespace_node **out_node); - -acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node); - -/* - * nsobject - Object management for namespace nodes - */ -acpi_status -acpi_ns_attach_object(struct acpi_namespace_node *node, - union acpi_operand_object *object, acpi_object_type type); - -union acpi_operand_object *acpi_ns_get_attached_object(struct - acpi_namespace_node - *node); - -union acpi_operand_object *acpi_ns_get_secondary_object(union - acpi_operand_object - *obj_desc); - -acpi_status -acpi_ns_attach_data(struct acpi_namespace_node *node, - acpi_object_handler handler, void *data); - -acpi_status -acpi_ns_detach_data(struct acpi_namespace_node *node, - acpi_object_handler handler); - -acpi_status -acpi_ns_get_attached_data(struct acpi_namespace_node *node, - acpi_object_handler handler, void **data); - -/* - * nssearch - Namespace searching and entry - */ -acpi_status -acpi_ns_search_and_enter(u32 entry_name, - struct acpi_walk_state *walk_state, - struct acpi_namespace_node *node, - acpi_interpreter_mode interpreter_mode, - acpi_object_type type, - u32 flags, struct acpi_namespace_node **ret_node); - -acpi_status -acpi_ns_search_one_scope(u32 entry_name, - struct acpi_namespace_node *node, - acpi_object_type type, - struct acpi_namespace_node **ret_node); - -void -acpi_ns_install_node(struct acpi_walk_state *walk_state, - struct acpi_namespace_node *parent_node, - struct acpi_namespace_node *node, acpi_object_type type); - -/* - * nsutils - Utility functions - */ -u8 acpi_ns_valid_root_prefix(char prefix); - -acpi_object_type acpi_ns_get_type(struct acpi_namespace_node *node); - -u32 acpi_ns_local(acpi_object_type type); - -void -acpi_ns_report_error(const char *module_name, - u32 line_number, - const char *internal_name, acpi_status lookup_status); - -void -acpi_ns_report_method_error(const char *module_name, - u32 line_number, - const char *message, - struct acpi_namespace_node *node, - const char *path, acpi_status lookup_status); - -void -acpi_ns_print_node_pathname(struct acpi_namespace_node *node, const char *msg); - -acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info); - -void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info); - -acpi_status -acpi_ns_internalize_name(const char *dotted_name, char **converted_name); - -acpi_status -acpi_ns_externalize_name(u32 internal_name_length, - const char *internal_name, - u32 * converted_name_length, char **converted_name); - -struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle); - -acpi_handle acpi_ns_convert_entry_to_handle(struct acpi_namespace_node *node); - -void acpi_ns_terminate(void); - -struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node - *node); - -struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct - acpi_namespace_node - *node); - -#endif /* __ACNAMESP_H__ */ diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h deleted file mode 100644 index eb6f038b03d..00000000000 --- a/include/acpi/acobject.h +++ /dev/null @@ -1,446 +0,0 @@ - -/****************************************************************************** - * - * Name: acobject.h - Definition of union acpi_operand_object (Internal object only) - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACOBJECT_H -#define _ACOBJECT_H - -/* acpisrc:struct_defs -- for acpisrc conversion */ - -/* - * The union acpi_operand_object is used to pass AML operands from the dispatcher - * to the interpreter, and to keep track of the various handlers such as - * address space handlers and notify handlers. The object is a constant - * size in order to allow it to be cached and reused. - * - * Note: The object is optimized to be aligned and will not work if it is - * byte-packed. - */ -#if ACPI_MACHINE_WIDTH == 64 -#pragma pack(8) -#else -#pragma pack(4) -#endif - -/******************************************************************************* - * - * Common Descriptors - * - ******************************************************************************/ - -/* - * Common area for all objects. - * - * descriptor_type is used to differentiate between internal descriptors, and - * must be in the same place across all descriptors - * - * Note: The descriptor_type and Type fields must appear in the identical - * position in both the struct acpi_namespace_node and union acpi_operand_object - * structures. - */ -#define ACPI_OBJECT_COMMON_HEADER \ - union acpi_operand_object *next_object; /* Objects linked to parent NS node */\ - u8 descriptor_type; /* To differentiate various internal objs */\ - u8 type; /* acpi_object_type */\ - u16 reference_count; /* For object deletion management */\ - u8 flags; - /* - * Note: There are 3 bytes available here before the - * next natural alignment boundary (for both 32/64 cases) - */ - -/* Values for Flag byte above */ - -#define AOPOBJ_AML_CONSTANT 0x01 -#define AOPOBJ_STATIC_POINTER 0x02 -#define AOPOBJ_DATA_VALID 0x04 -#define AOPOBJ_OBJECT_INITIALIZED 0x08 -#define AOPOBJ_SETUP_COMPLETE 0x10 -#define AOPOBJ_SINGLE_DATUM 0x20 -#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */ - -/****************************************************************************** - * - * Basic data types - * - *****************************************************************************/ - -struct acpi_object_common { -ACPI_OBJECT_COMMON_HEADER}; - -struct acpi_object_integer { - ACPI_OBJECT_COMMON_HEADER u8 fill[3]; /* Prevent warning on some compilers */ - acpi_integer value; -}; - -/* - * Note: The String and Buffer object must be identical through the Pointer - * and length elements. There is code that depends on this. - * - * Fields common to both Strings and Buffers - */ -#define ACPI_COMMON_BUFFER_INFO(_type) \ - _type *pointer; \ - u32 length; - -struct acpi_object_string { /* Null terminated, ASCII characters only */ - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_BUFFER_INFO(char) /* String in AML stream or allocated string */ -}; - -struct acpi_object_buffer { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_BUFFER_INFO(u8) /* Buffer in AML stream or allocated buffer */ - u32 aml_length; - u8 *aml_start; - struct acpi_namespace_node *node; /* Link back to parent node */ -}; - -struct acpi_object_package { - ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Link back to parent node */ - union acpi_operand_object **elements; /* Array of pointers to acpi_objects */ - u8 *aml_start; - u32 aml_length; - u32 count; /* # of elements in package */ -}; - -/****************************************************************************** - * - * Complex data types - * - *****************************************************************************/ - -struct acpi_object_event { - ACPI_OBJECT_COMMON_HEADER acpi_semaphore os_semaphore; /* Actual OS synchronization object */ -}; - -struct acpi_object_mutex { - ACPI_OBJECT_COMMON_HEADER u8 sync_level; /* 0-15, specified in Mutex() call */ - u16 acquisition_depth; /* Allow multiple Acquires, same thread */ - acpi_mutex os_mutex; /* Actual OS synchronization object */ - acpi_thread_id thread_id; /* Current owner of the mutex */ - struct acpi_thread_state *owner_thread; /* Current owner of the mutex */ - union acpi_operand_object *prev; /* Link for list of acquired mutexes */ - union acpi_operand_object *next; /* Link for list of acquired mutexes */ - struct acpi_namespace_node *node; /* Containing namespace node */ - u8 original_sync_level; /* Owner's original sync level (0-15) */ -}; - -struct acpi_object_region { - ACPI_OBJECT_COMMON_HEADER u8 space_id; - struct acpi_namespace_node *node; /* Containing namespace node */ - union acpi_operand_object *handler; /* Handler for region access */ - union acpi_operand_object *next; - acpi_physical_address address; - u32 length; -}; - -struct acpi_object_method { - ACPI_OBJECT_COMMON_HEADER u8 method_flags; - u8 param_count; - u8 sync_level; - union acpi_operand_object *mutex; - u8 *aml_start; - ACPI_INTERNAL_METHOD implementation; - u32 aml_length; - u8 thread_count; - acpi_owner_id owner_id; -}; - -/****************************************************************************** - * - * Objects that can be notified. All share a common notify_info area. - * - *****************************************************************************/ - -/* - * Common fields for objects that support ASL notifications - */ -#define ACPI_COMMON_NOTIFY_INFO \ - union acpi_operand_object *system_notify; /* Handler for system notifies */\ - union acpi_operand_object *device_notify; /* Handler for driver notifies */\ - union acpi_operand_object *handler; /* Handler for Address space */ - -struct acpi_object_notify_common { /* COMMON NOTIFY for POWER, PROCESSOR, DEVICE, and THERMAL */ -ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO}; - -struct acpi_object_device { - ACPI_OBJECT_COMMON_HEADER - ACPI_COMMON_NOTIFY_INFO struct acpi_gpe_block_info *gpe_block; -}; - -struct acpi_object_power_resource { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO u32 system_level; - u32 resource_order; -}; - -struct acpi_object_processor { - ACPI_OBJECT_COMMON_HEADER - /* The next two fields take advantage of the 3-byte space before NOTIFY_INFO */ - u8 proc_id; - u8 length; - ACPI_COMMON_NOTIFY_INFO acpi_io_address address; -}; - -struct acpi_object_thermal_zone { -ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO}; - -/****************************************************************************** - * - * Fields. All share a common header/info field. - * - *****************************************************************************/ - -/* - * Common bitfield for the field objects - * "Field Datum" -- a datum from the actual field object - * "Buffer Datum" -- a datum from a user buffer, read from or to be written to the field - */ -#define ACPI_COMMON_FIELD_INFO \ - u8 field_flags; /* Access, update, and lock bits */\ - u8 attribute; /* From access_as keyword */\ - u8 access_byte_width; /* Read/Write size in bytes */\ - struct acpi_namespace_node *node; /* Link back to parent node */\ - u32 bit_length; /* Length of field in bits */\ - u32 base_byte_offset; /* Byte offset within containing object */\ - u32 value; /* Value to store into the Bank or Index register */\ - u8 start_field_bit_offset;/* Bit offset within first field datum (0-63) */\ - u8 access_bit_width; /* Read/Write size in bits (8-64) */ - -struct acpi_object_field_common { /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */ - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Parent Operation Region object (REGION/BANK fields only) */ -}; - -struct acpi_object_region_field { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Containing op_region object */ -}; - -struct acpi_object_bank_field { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Containing op_region object */ - union acpi_operand_object *bank_obj; /* bank_select Register object */ -}; - -struct acpi_object_index_field { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO - /* - * No "RegionObj" pointer needed since the Index and Data registers - * are each field definitions unto themselves. - */ - union acpi_operand_object *index_obj; /* Index register */ - union acpi_operand_object *data_obj; /* Data register */ -}; - -/* The buffer_field is different in that it is part of a Buffer, not an op_region */ - -struct acpi_object_buffer_field { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *buffer_obj; /* Containing Buffer object */ -}; - -/****************************************************************************** - * - * Objects for handlers - * - *****************************************************************************/ - -struct acpi_object_notify_handler { - ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */ - acpi_notify_handler handler; - void *context; -}; - -struct acpi_object_addr_handler { - ACPI_OBJECT_COMMON_HEADER u8 space_id; - u8 handler_flags; - acpi_adr_space_handler handler; - struct acpi_namespace_node *node; /* Parent device */ - void *context; - acpi_adr_space_setup setup; - union acpi_operand_object *region_list; /* regions using this handler */ - union acpi_operand_object *next; -}; - -/* Flags for address handler (handler_flags) */ - -#define ACPI_ADDR_HANDLER_DEFAULT_INSTALLED 0x01 - -/****************************************************************************** - * - * Special internal objects - * - *****************************************************************************/ - -/* - * The Reference object is used for these opcodes: - * Arg[0-6], Local[0-7], index_op, name_op, ref_of_op, load_op, load_table_op, debug_op - * The Reference.Class differentiates these types. - */ -struct acpi_object_reference { - ACPI_OBJECT_COMMON_HEADER u8 class; /* Reference Class */ - u8 target_type; /* Used for Index Op */ - u8 reserved; - void *object; /* name_op=>HANDLE to obj, index_op=>union acpi_operand_object */ - struct acpi_namespace_node *node; /* ref_of or Namepath */ - union acpi_operand_object **where; /* Target of Index */ - u32 value; /* Used for Local/Arg/Index/ddb_handle */ -}; - -/* Values for Reference.Class above */ - -typedef enum { - ACPI_REFCLASS_LOCAL = 0, /* Method local */ - ACPI_REFCLASS_ARG = 1, /* Method argument */ - ACPI_REFCLASS_REFOF = 2, /* Result of ref_of() TBD: Split to Ref/Node and Ref/operand_obj? */ - ACPI_REFCLASS_INDEX = 3, /* Result of Index() */ - ACPI_REFCLASS_TABLE = 4, /* ddb_handle - Load(), load_table() */ - ACPI_REFCLASS_NAME = 5, /* Reference to a named object */ - ACPI_REFCLASS_DEBUG = 6, /* Debug object */ - - ACPI_REFCLASS_MAX = 6 -} ACPI_REFERENCE_CLASSES; - -/* - * Extra object is used as additional storage for types that - * have AML code in their declarations (term_args) that must be - * evaluated at run time. - * - * Currently: Region and field_unit types - */ -struct acpi_object_extra { - ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *method_REG; /* _REG method for this region (if any) */ - void *region_context; /* Region-specific data */ - u8 *aml_start; - u32 aml_length; -}; - -/* Additional data that can be attached to namespace nodes */ - -struct acpi_object_data { - ACPI_OBJECT_COMMON_HEADER acpi_object_handler handler; - void *pointer; -}; - -/* Structure used when objects are cached for reuse */ - -struct acpi_object_cache_list { - ACPI_OBJECT_COMMON_HEADER union acpi_operand_object *next; /* Link for object cache and internal lists */ -}; - -/****************************************************************************** - * - * union acpi_operand_object Descriptor - a giant union of all of the above - * - *****************************************************************************/ - -union acpi_operand_object { - struct acpi_object_common common; - struct acpi_object_integer integer; - struct acpi_object_string string; - struct acpi_object_buffer buffer; - struct acpi_object_package package; - struct acpi_object_event event; - struct acpi_object_method method; - struct acpi_object_mutex mutex; - struct acpi_object_region region; - struct acpi_object_notify_common common_notify; - struct acpi_object_device device; - struct acpi_object_power_resource power_resource; - struct acpi_object_processor processor; - struct acpi_object_thermal_zone thermal_zone; - struct acpi_object_field_common common_field; - struct acpi_object_region_field field; - struct acpi_object_buffer_field buffer_field; - struct acpi_object_bank_field bank_field; - struct acpi_object_index_field index_field; - struct acpi_object_notify_handler notify; - struct acpi_object_addr_handler address_space; - struct acpi_object_reference reference; - struct acpi_object_extra extra; - struct acpi_object_data data; - struct acpi_object_cache_list cache; - - /* - * Add namespace node to union in order to simplify code that accepts both - * ACPI_OPERAND_OBJECTs and ACPI_NAMESPACE_NODEs. The structures share - * a common descriptor_type field in order to differentiate them. - */ - struct acpi_namespace_node node; -}; - -/****************************************************************************** - * - * union acpi_descriptor - objects that share a common descriptor identifier - * - *****************************************************************************/ - -/* Object descriptor types */ - -#define ACPI_DESC_TYPE_CACHED 0x01 /* Used only when object is cached */ -#define ACPI_DESC_TYPE_STATE 0x02 -#define ACPI_DESC_TYPE_STATE_UPDATE 0x03 -#define ACPI_DESC_TYPE_STATE_PACKAGE 0x04 -#define ACPI_DESC_TYPE_STATE_CONTROL 0x05 -#define ACPI_DESC_TYPE_STATE_RPSCOPE 0x06 -#define ACPI_DESC_TYPE_STATE_PSCOPE 0x07 -#define ACPI_DESC_TYPE_STATE_WSCOPE 0x08 -#define ACPI_DESC_TYPE_STATE_RESULT 0x09 -#define ACPI_DESC_TYPE_STATE_NOTIFY 0x0A -#define ACPI_DESC_TYPE_STATE_THREAD 0x0B -#define ACPI_DESC_TYPE_WALK 0x0C -#define ACPI_DESC_TYPE_PARSER 0x0D -#define ACPI_DESC_TYPE_OPERAND 0x0E -#define ACPI_DESC_TYPE_NAMED 0x0F -#define ACPI_DESC_TYPE_MAX 0x0F - -struct acpi_common_descriptor { - void *common_pointer; - u8 descriptor_type; /* To differentiate various internal objs */ -}; - -union acpi_descriptor { - struct acpi_common_descriptor common; - union acpi_operand_object object; - struct acpi_namespace_node node; - union acpi_parse_object op; -}; - -#pragma pack() - -#endif /* _ACOBJECT_H */ diff --git a/include/acpi/acopcode.h b/include/acpi/acopcode.h deleted file mode 100644 index dfdf6332788..00000000000 --- a/include/acpi/acopcode.h +++ /dev/null @@ -1,323 +0,0 @@ -/****************************************************************************** - * - * Name: acopcode.h - AML opcode information for the AML parser and interpreter - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACOPCODE_H__ -#define __ACOPCODE_H__ - -#define MAX_EXTENDED_OPCODE 0x88 -#define NUM_EXTENDED_OPCODE (MAX_EXTENDED_OPCODE + 1) -#define MAX_INTERNAL_OPCODE -#define NUM_INTERNAL_OPCODE (MAX_INTERNAL_OPCODE + 1) - -/* Used for non-assigned opcodes */ - -#define _UNK 0x6B - -/* - * Reserved ASCII characters. Do not use any of these for - * internal opcodes, since they are used to differentiate - * name strings from AML opcodes - */ -#define _ASC 0x6C -#define _NAM 0x6C -#define _PFX 0x6D - -/* - * All AML opcodes and the parse-time arguments for each. Used by the AML - * parser Each list is compressed into a 32-bit number and stored in the - * master opcode table (in psopcode.c). - */ -#define ARGP_ACCESSFIELD_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_ACQUIRE_OP ARGP_LIST2 (ARGP_SUPERNAME, ARGP_WORDDATA) -#define ARGP_ADD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_ALIAS_OP ARGP_LIST2 (ARGP_NAMESTRING, ARGP_NAME) -#define ARGP_ARG0 ARG_NONE -#define ARGP_ARG1 ARG_NONE -#define ARGP_ARG2 ARG_NONE -#define ARGP_ARG3 ARG_NONE -#define ARGP_ARG4 ARG_NONE -#define ARGP_ARG5 ARG_NONE -#define ARGP_ARG6 ARG_NONE -#define ARGP_BANK_FIELD_OP ARGP_LIST6 (ARGP_PKGLENGTH, ARGP_NAMESTRING, ARGP_NAMESTRING,ARGP_TERMARG, ARGP_BYTEDATA, ARGP_FIELDLIST) -#define ARGP_BIT_AND_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BIT_NAND_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BIT_NOR_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BIT_NOT_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BIT_OR_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BIT_XOR_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_BREAK_OP ARG_NONE -#define ARGP_BREAK_POINT_OP ARG_NONE -#define ARGP_BUFFER_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_TERMARG, ARGP_BYTELIST) -#define ARGP_BYTE_OP ARGP_LIST1 (ARGP_BYTEDATA) -#define ARGP_BYTELIST_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_CONCAT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_CONCAT_RES_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_COND_REF_OF_OP ARGP_LIST2 (ARGP_SUPERNAME, ARGP_SUPERNAME) -#define ARGP_CONTINUE_OP ARG_NONE -#define ARGP_COPY_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_SIMPLENAME) -#define ARGP_CREATE_BIT_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_CREATE_BYTE_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_CREATE_DWORD_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_CREATE_FIELD_OP ARGP_LIST4 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_CREATE_QWORD_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_CREATE_WORD_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) -#define ARGP_DATA_REGION_OP ARGP_LIST4 (ARGP_NAME, ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_DEBUG_OP ARG_NONE -#define ARGP_DECREMENT_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_DEREF_OF_OP ARGP_LIST1 (ARGP_TERMARG) -#define ARGP_DEVICE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_OBJLIST) -#define ARGP_DIVIDE_OP ARGP_LIST4 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET, ARGP_TARGET) -#define ARGP_DWORD_OP ARGP_LIST1 (ARGP_DWORDDATA) -#define ARGP_ELSE_OP ARGP_LIST2 (ARGP_PKGLENGTH, ARGP_TERMLIST) -#define ARGP_EVENT_OP ARGP_LIST1 (ARGP_NAME) -#define ARGP_FATAL_OP ARGP_LIST3 (ARGP_BYTEDATA, ARGP_DWORDDATA, ARGP_TERMARG) -#define ARGP_FIELD_OP ARGP_LIST4 (ARGP_PKGLENGTH, ARGP_NAMESTRING, ARGP_BYTEDATA, ARGP_FIELDLIST) -#define ARGP_FIND_SET_LEFT_BIT_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_FIND_SET_RIGHT_BIT_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_FROM_BCD_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_IF_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_TERMARG, ARGP_TERMLIST) -#define ARGP_INCREMENT_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_INDEX_FIELD_OP ARGP_LIST5 (ARGP_PKGLENGTH, ARGP_NAMESTRING, ARGP_NAMESTRING,ARGP_BYTEDATA, ARGP_FIELDLIST) -#define ARGP_INDEX_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_LAND_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LEQUAL_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LGREATER_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LGREATEREQUAL_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LLESS_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LLESSEQUAL_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LNOT_OP ARGP_LIST1 (ARGP_TERMARG) -#define ARGP_LNOTEQUAL_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LOAD_OP ARGP_LIST2 (ARGP_NAMESTRING, ARGP_SUPERNAME) -#define ARGP_LOAD_TABLE_OP ARGP_LIST6 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_LOCAL0 ARG_NONE -#define ARGP_LOCAL1 ARG_NONE -#define ARGP_LOCAL2 ARG_NONE -#define ARGP_LOCAL3 ARG_NONE -#define ARGP_LOCAL4 ARG_NONE -#define ARGP_LOCAL5 ARG_NONE -#define ARGP_LOCAL6 ARG_NONE -#define ARGP_LOCAL7 ARG_NONE -#define ARGP_LOR_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_MATCH_OP ARGP_LIST6 (ARGP_TERMARG, ARGP_BYTEDATA, ARGP_TERMARG, ARGP_BYTEDATA, ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_METHOD_OP ARGP_LIST4 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_BYTEDATA, ARGP_TERMLIST) -#define ARGP_METHODCALL_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_MID_OP ARGP_LIST4 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_MOD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_MULTIPLY_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_MUTEX_OP ARGP_LIST2 (ARGP_NAME, ARGP_BYTEDATA) -#define ARGP_NAME_OP ARGP_LIST2 (ARGP_NAME, ARGP_DATAOBJ) -#define ARGP_NAMEDFIELD_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_NAMEPATH_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_NOOP_OP ARG_NONE -#define ARGP_NOTIFY_OP ARGP_LIST2 (ARGP_SUPERNAME, ARGP_TERMARG) -#define ARGP_ONE_OP ARG_NONE -#define ARGP_ONES_OP ARG_NONE -#define ARGP_PACKAGE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_BYTEDATA, ARGP_DATAOBJLIST) -#define ARGP_POWER_RES_OP ARGP_LIST5 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_BYTEDATA, ARGP_WORDDATA, ARGP_OBJLIST) -#define ARGP_PROCESSOR_OP ARGP_LIST6 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_BYTEDATA, ARGP_DWORDDATA, ARGP_BYTEDATA, ARGP_OBJLIST) -#define ARGP_QWORD_OP ARGP_LIST1 (ARGP_QWORDDATA) -#define ARGP_REF_OF_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_REGION_OP ARGP_LIST4 (ARGP_NAME, ARGP_BYTEDATA, ARGP_TERMARG, ARGP_TERMARG) -#define ARGP_RELEASE_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_RESERVEDFIELD_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_RESET_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_RETURN_OP ARGP_LIST1 (ARGP_TERMARG) -#define ARGP_REVISION_OP ARG_NONE -#define ARGP_SCOPE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_TERMLIST) -#define ARGP_SHIFT_LEFT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_SHIFT_RIGHT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_SIGNAL_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_SIZE_OF_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_SLEEP_OP ARGP_LIST1 (ARGP_TERMARG) -#define ARGP_STALL_OP ARGP_LIST1 (ARGP_TERMARG) -#define ARGP_STATICSTRING_OP ARGP_LIST1 (ARGP_NAMESTRING) -#define ARGP_STORE_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_SUPERNAME) -#define ARGP_STRING_OP ARGP_LIST1 (ARGP_CHARLIST) -#define ARGP_SUBTRACT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_THERMAL_ZONE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_OBJLIST) -#define ARGP_TIMER_OP ARG_NONE -#define ARGP_TO_BCD_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TO_BUFFER_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TO_DEC_STR_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TO_HEX_STR_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TO_INTEGER_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TO_STRING_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) -#define ARGP_TYPE_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_UNLOAD_OP ARGP_LIST1 (ARGP_SUPERNAME) -#define ARGP_VAR_PACKAGE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_TERMARG, ARGP_DATAOBJLIST) -#define ARGP_WAIT_OP ARGP_LIST2 (ARGP_SUPERNAME, ARGP_TERMARG) -#define ARGP_WHILE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_TERMARG, ARGP_TERMLIST) -#define ARGP_WORD_OP ARGP_LIST1 (ARGP_WORDDATA) -#define ARGP_ZERO_OP ARG_NONE - -/* - * All AML opcodes and the runtime arguments for each. Used by the AML - * interpreter Each list is compressed into a 32-bit number and stored - * in the master opcode table (in psopcode.c). - * - * (Used by prep_operands procedure and the ASL Compiler) - */ -#define ARGI_ACCESSFIELD_OP ARGI_INVALID_OPCODE -#define ARGI_ACQUIRE_OP ARGI_LIST2 (ARGI_MUTEX, ARGI_INTEGER) -#define ARGI_ADD_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_ALIAS_OP ARGI_INVALID_OPCODE -#define ARGI_ARG0 ARG_NONE -#define ARGI_ARG1 ARG_NONE -#define ARGI_ARG2 ARG_NONE -#define ARGI_ARG3 ARG_NONE -#define ARGI_ARG4 ARG_NONE -#define ARGI_ARG5 ARG_NONE -#define ARGI_ARG6 ARG_NONE -#define ARGI_BANK_FIELD_OP ARGI_INVALID_OPCODE -#define ARGI_BIT_AND_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BIT_NAND_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BIT_NOR_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BIT_NOT_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BIT_OR_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BIT_XOR_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_BREAK_OP ARG_NONE -#define ARGI_BREAK_POINT_OP ARG_NONE -#define ARGI_BUFFER_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_BYTE_OP ARGI_INVALID_OPCODE -#define ARGI_BYTELIST_OP ARGI_INVALID_OPCODE -#define ARGI_CONCAT_OP ARGI_LIST3 (ARGI_COMPUTEDATA,ARGI_COMPUTEDATA, ARGI_TARGETREF) -#define ARGI_CONCAT_RES_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_BUFFER, ARGI_TARGETREF) -#define ARGI_COND_REF_OF_OP ARGI_LIST2 (ARGI_OBJECT_REF, ARGI_TARGETREF) -#define ARGI_CONTINUE_OP ARGI_INVALID_OPCODE -#define ARGI_COPY_OP ARGI_LIST2 (ARGI_ANYTYPE, ARGI_SIMPLE_TARGET) -#define ARGI_CREATE_BIT_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_CREATE_BYTE_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_CREATE_DWORD_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_CREATE_FIELD_OP ARGI_LIST4 (ARGI_BUFFER, ARGI_INTEGER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_CREATE_QWORD_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_CREATE_WORD_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) -#define ARGI_DATA_REGION_OP ARGI_LIST3 (ARGI_STRING, ARGI_STRING, ARGI_STRING) -#define ARGI_DEBUG_OP ARG_NONE -#define ARGI_DECREMENT_OP ARGI_LIST1 (ARGI_TARGETREF) -#define ARGI_DEREF_OF_OP ARGI_LIST1 (ARGI_REF_OR_STRING) -#define ARGI_DEVICE_OP ARGI_INVALID_OPCODE -#define ARGI_DIVIDE_OP ARGI_LIST4 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF, ARGI_TARGETREF) -#define ARGI_DWORD_OP ARGI_INVALID_OPCODE -#define ARGI_ELSE_OP ARGI_INVALID_OPCODE -#define ARGI_EVENT_OP ARGI_INVALID_OPCODE -#define ARGI_FATAL_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_INTEGER) -#define ARGI_FIELD_OP ARGI_INVALID_OPCODE -#define ARGI_FIND_SET_LEFT_BIT_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_FIND_SET_RIGHT_BIT_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_FROM_BCD_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_FIXED_TARGET) -#define ARGI_IF_OP ARGI_INVALID_OPCODE -#define ARGI_INCREMENT_OP ARGI_LIST1 (ARGI_TARGETREF) -#define ARGI_INDEX_FIELD_OP ARGI_INVALID_OPCODE -#define ARGI_INDEX_OP ARGI_LIST3 (ARGI_COMPLEXOBJ, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_LAND_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_INTEGER) -#define ARGI_LEQUAL_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_COMPUTEDATA) -#define ARGI_LGREATER_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_COMPUTEDATA) -#define ARGI_LGREATEREQUAL_OP ARGI_INVALID_OPCODE -#define ARGI_LLESS_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_COMPUTEDATA) -#define ARGI_LLESSEQUAL_OP ARGI_INVALID_OPCODE -#define ARGI_LNOT_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_LNOTEQUAL_OP ARGI_INVALID_OPCODE -#define ARGI_LOAD_OP ARGI_LIST2 (ARGI_REGION_OR_BUFFER,ARGI_TARGETREF) -#define ARGI_LOAD_TABLE_OP ARGI_LIST6 (ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_ANYTYPE) -#define ARGI_LOCAL0 ARG_NONE -#define ARGI_LOCAL1 ARG_NONE -#define ARGI_LOCAL2 ARG_NONE -#define ARGI_LOCAL3 ARG_NONE -#define ARGI_LOCAL4 ARG_NONE -#define ARGI_LOCAL5 ARG_NONE -#define ARGI_LOCAL6 ARG_NONE -#define ARGI_LOCAL7 ARG_NONE -#define ARGI_LOR_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_INTEGER) -#define ARGI_MATCH_OP ARGI_LIST6 (ARGI_PACKAGE, ARGI_INTEGER, ARGI_COMPUTEDATA, ARGI_INTEGER,ARGI_COMPUTEDATA,ARGI_INTEGER) -#define ARGI_METHOD_OP ARGI_INVALID_OPCODE -#define ARGI_METHODCALL_OP ARGI_INVALID_OPCODE -#define ARGI_MID_OP ARGI_LIST4 (ARGI_BUFFER_OR_STRING,ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_MOD_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_MULTIPLY_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_MUTEX_OP ARGI_INVALID_OPCODE -#define ARGI_NAME_OP ARGI_INVALID_OPCODE -#define ARGI_NAMEDFIELD_OP ARGI_INVALID_OPCODE -#define ARGI_NAMEPATH_OP ARGI_INVALID_OPCODE -#define ARGI_NOOP_OP ARG_NONE -#define ARGI_NOTIFY_OP ARGI_LIST2 (ARGI_DEVICE_REF, ARGI_INTEGER) -#define ARGI_ONE_OP ARG_NONE -#define ARGI_ONES_OP ARG_NONE -#define ARGI_PACKAGE_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_POWER_RES_OP ARGI_INVALID_OPCODE -#define ARGI_PROCESSOR_OP ARGI_INVALID_OPCODE -#define ARGI_QWORD_OP ARGI_INVALID_OPCODE -#define ARGI_REF_OF_OP ARGI_LIST1 (ARGI_OBJECT_REF) -#define ARGI_REGION_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_INTEGER) -#define ARGI_RELEASE_OP ARGI_LIST1 (ARGI_MUTEX) -#define ARGI_RESERVEDFIELD_OP ARGI_INVALID_OPCODE -#define ARGI_RESET_OP ARGI_LIST1 (ARGI_EVENT) -#define ARGI_RETURN_OP ARGI_INVALID_OPCODE -#define ARGI_REVISION_OP ARG_NONE -#define ARGI_SCOPE_OP ARGI_INVALID_OPCODE -#define ARGI_SHIFT_LEFT_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_SHIFT_RIGHT_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_SIGNAL_OP ARGI_LIST1 (ARGI_EVENT) -#define ARGI_SIZE_OF_OP ARGI_LIST1 (ARGI_DATAOBJECT) -#define ARGI_SLEEP_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_STALL_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_STATICSTRING_OP ARGI_INVALID_OPCODE -#define ARGI_STORE_OP ARGI_LIST2 (ARGI_DATAREFOBJ, ARGI_TARGETREF) -#define ARGI_STRING_OP ARGI_INVALID_OPCODE -#define ARGI_SUBTRACT_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) -#define ARGI_THERMAL_ZONE_OP ARGI_INVALID_OPCODE -#define ARGI_TIMER_OP ARG_NONE -#define ARGI_TO_BCD_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_FIXED_TARGET) -#define ARGI_TO_BUFFER_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_FIXED_TARGET) -#define ARGI_TO_DEC_STR_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_FIXED_TARGET) -#define ARGI_TO_HEX_STR_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_FIXED_TARGET) -#define ARGI_TO_INTEGER_OP ARGI_LIST2 (ARGI_COMPUTEDATA,ARGI_FIXED_TARGET) -#define ARGI_TO_STRING_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_FIXED_TARGET) -#define ARGI_TYPE_OP ARGI_LIST1 (ARGI_ANYTYPE) -#define ARGI_UNLOAD_OP ARGI_LIST1 (ARGI_DDBHANDLE) -#define ARGI_VAR_PACKAGE_OP ARGI_LIST1 (ARGI_INTEGER) -#define ARGI_WAIT_OP ARGI_LIST2 (ARGI_EVENT, ARGI_INTEGER) -#define ARGI_WHILE_OP ARGI_INVALID_OPCODE -#define ARGI_WORD_OP ARGI_INVALID_OPCODE -#define ARGI_ZERO_OP ARG_NONE - -#endif /* __ACOPCODE_H__ */ diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index db8852d8bcf..5c823d5ab78 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -45,9 +45,9 @@ #define __ACOUTPUT_H__ /* - * Debug levels and component IDs. These are used to control the - * granularity of the output of the DEBUG_PRINT macro -- on a per- - * component basis and a per-exception-type basis. + * Debug levels and component IDs. These are used to control the + * granularity of the output of the ACPI_DEBUG_PRINT macro -- on a + * per-component basis and a per-exception-type basis. */ /* Component IDs are used in the global "DebugLayer" */ @@ -69,8 +69,10 @@ #define ACPI_COMPILER 0x00001000 #define ACPI_TOOLS 0x00002000 +#define ACPI_EXAMPLE 0x00004000 +#define ACPI_DRIVER 0x00008000 -#define ACPI_ALL_COMPONENTS 0x00003FFF +#define ACPI_ALL_COMPONENTS 0x0000FFFF #define ACPI_COMPONENT_DEFAULT (ACPI_ALL_COMPONENTS) /* Component IDs reserved for ACPI drivers */ @@ -78,7 +80,7 @@ #define ACPI_ALL_DRIVERS 0xFFFF0000 /* - * Raw debug output levels, do not use these in the DEBUG_PRINT macros + * Raw debug output levels, do not use these in the ACPI_DEBUG_PRINT macros */ #define ACPI_LV_INIT 0x00000001 #define ACPI_LV_DEBUG_OBJECT 0x00000002 @@ -176,4 +178,95 @@ #define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) #define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL) +#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES) +/* + * Module name is included in both debug and non-debug versions primarily for + * error messages. The __FILE__ macro is not very useful for this, because it + * often includes the entire pathname to the module + */ +#define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name; +#else +#define ACPI_MODULE_NAME(name) +#endif + +/* + * Ascii error messages can be configured out + */ +#ifndef ACPI_NO_ERROR_MESSAGES +#define AE_INFO _acpi_module_name, __LINE__ + +/* + * Error reporting. Callers module and line number are inserted by AE_INFO, + * the plist contains a set of parens to allow variable-length lists. + * These macros are used for both the debug and non-debug versions of the code. + */ +#define ACPI_INFO(plist) acpi_info plist +#define ACPI_WARNING(plist) acpi_warning plist +#define ACPI_EXCEPTION(plist) acpi_exception plist +#define ACPI_ERROR(plist) acpi_error plist + +#else + +/* No error messages */ + +#define ACPI_INFO(plist) +#define ACPI_WARNING(plist) +#define ACPI_EXCEPTION(plist) +#define ACPI_ERROR(plist) + +#endif /* ACPI_NO_ERROR_MESSAGES */ + +/* + * Debug macros that are conditionally compiled + */ +#ifdef ACPI_DEBUG_OUTPUT + +/* + * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, + * define it now. This is the case where there the compiler does not support + * a __FUNCTION__ macro or equivalent. + */ +#ifndef ACPI_GET_FUNCTION_NAME +#define ACPI_GET_FUNCTION_NAME _acpi_function_name + +/* + * The Name parameter should be the procedure name as a quoted string. + * The function name is also used by the function exit macros below. + * Note: (const char) is used to be compatible with the debug interfaces + * and macros such as __FUNCTION__. + */ +#define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name; + +#else +/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */ + +#define ACPI_FUNCTION_NAME(name) +#endif /* ACPI_GET_FUNCTION_NAME */ + +/* + * Common parameters used for debug output functions: + * line number, function name, module(file) name, component ID + */ +#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT + +/* + * Master debug print macros + * Print message if and only if: + * 1) Debug print for the current component is enabled + * 2) Debug error level or trace level for the print statement is enabled + */ +#define ACPI_DEBUG_PRINT(plist) acpi_debug_print plist +#define ACPI_DEBUG_PRINT_RAW(plist) acpi_debug_print_raw plist + +#else +/* + * This is the non-debug case -- make everything go away, + * leaving no executable debug code! + */ +#define ACPI_FUNCTION_NAME(a) +#define ACPI_DEBUG_PRINT(pl) +#define ACPI_DEBUG_PRINT_RAW(pl) + +#endif /* ACPI_DEBUG_OUTPUT */ + #endif /* __ACOUTPUT_H__ */ diff --git a/include/acpi/acparser.h b/include/acpi/acparser.h deleted file mode 100644 index 23ee0fbf561..00000000000 --- a/include/acpi/acparser.h +++ /dev/null @@ -1,234 +0,0 @@ -/****************************************************************************** - * - * Module Name: acparser.h - AML Parser subcomponent prototypes and defines - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACPARSER_H__ -#define __ACPARSER_H__ - -#define OP_HAS_RETURN_VALUE 1 - -/* Variable number of arguments. This field must be 32 bits */ - -#define ACPI_VAR_ARGS ACPI_UINT32_MAX - -#define ACPI_PARSE_DELETE_TREE 0x0001 -#define ACPI_PARSE_NO_TREE_DELETE 0x0000 -#define ACPI_PARSE_TREE_MASK 0x0001 - -#define ACPI_PARSE_LOAD_PASS1 0x0010 -#define ACPI_PARSE_LOAD_PASS2 0x0020 -#define ACPI_PARSE_EXECUTE 0x0030 -#define ACPI_PARSE_MODE_MASK 0x0030 - -#define ACPI_PARSE_DEFERRED_OP 0x0100 -#define ACPI_PARSE_DISASSEMBLE 0x0200 - -/****************************************************************************** - * - * Parser interfaces - * - *****************************************************************************/ - -/* - * psxface - Parser external interfaces - */ -acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info); - -/* - * psargs - Parse AML opcode arguments - */ -u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state); - -char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state); - -void -acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state, - u32 arg_type, union acpi_parse_object *arg); - -acpi_status -acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, - struct acpi_parse_state *parser_state, - union acpi_parse_object *arg, u8 method_call); - -acpi_status -acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, - struct acpi_parse_state *parser_state, - u32 arg_type, union acpi_parse_object **return_arg); - -/* - * psfind - */ -union acpi_parse_object *acpi_ps_find_name(union acpi_parse_object *scope, - u32 name, u32 opcode); - -union acpi_parse_object *acpi_ps_get_parent(union acpi_parse_object *op); - -/* - * psopcode - AML Opcode information - */ -const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode); - -char *acpi_ps_get_opcode_name(u16 opcode); - -u8 acpi_ps_get_argument_count(u32 op_type); - -/* - * psparse - top level parsing routines - */ -acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state); - -u32 acpi_ps_get_opcode_size(u32 opcode); - -u16 acpi_ps_peek_opcode(struct acpi_parse_state *state); - -acpi_status -acpi_ps_complete_this_op(struct acpi_walk_state *walk_state, - union acpi_parse_object *op); - -acpi_status -acpi_ps_next_parse_state(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - acpi_status callback_status); - -/* - * psloop - main parse loop - */ -acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state); - -/* - * psscope - Scope stack management routines - */ -acpi_status -acpi_ps_init_scope(struct acpi_parse_state *parser_state, - union acpi_parse_object *root); - -union acpi_parse_object *acpi_ps_get_parent_scope(struct acpi_parse_state - *state); - -u8 acpi_ps_has_completed_scope(struct acpi_parse_state *parser_state); - -void -acpi_ps_pop_scope(struct acpi_parse_state *parser_state, - union acpi_parse_object **op, - u32 * arg_list, u32 * arg_count); - -acpi_status -acpi_ps_push_scope(struct acpi_parse_state *parser_state, - union acpi_parse_object *op, - u32 remaining_args, u32 arg_count); - -void acpi_ps_cleanup_scope(struct acpi_parse_state *state); - -/* - * pstree - parse tree manipulation routines - */ -void -acpi_ps_append_arg(union acpi_parse_object *op, union acpi_parse_object *arg); - -union acpi_parse_object *acpi_ps_find(union acpi_parse_object *scope, - char *path, u16 opcode, u32 create); - -union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn); - -#ifdef ACPI_FUTURE_USAGE -union acpi_parse_object *acpi_ps_get_depth_next(union acpi_parse_object *origin, - union acpi_parse_object *op); -#endif /* ACPI_FUTURE_USAGE */ - -/* - * pswalk - parse tree walk routines - */ -acpi_status -acpi_ps_walk_parsed_aml(union acpi_parse_object *start_op, - union acpi_parse_object *end_op, - union acpi_operand_object *mth_desc, - struct acpi_namespace_node *start_node, - union acpi_operand_object **params, - union acpi_operand_object **caller_return_desc, - acpi_owner_id owner_id, - acpi_parse_downwards descending_callback, - acpi_parse_upwards ascending_callback); - -acpi_status -acpi_ps_get_next_walk_op(struct acpi_walk_state *walk_state, - union acpi_parse_object *op, - acpi_parse_upwards ascending_callback); - -acpi_status acpi_ps_delete_completed_op(struct acpi_walk_state *walk_state); - -void acpi_ps_delete_parse_tree(union acpi_parse_object *root); - -/* - * psutils - parser utilities - */ -union acpi_parse_object *acpi_ps_create_scope_op(void); - -void acpi_ps_init_op(union acpi_parse_object *op, u16 opcode); - -union acpi_parse_object *acpi_ps_alloc_op(u16 opcode); - -void acpi_ps_free_op(union acpi_parse_object *op); - -u8 acpi_ps_is_leading_char(u32 c); - -u8 acpi_ps_is_prefix_char(u32 c); - -#ifdef ACPI_FUTURE_USAGE -u32 acpi_ps_get_name(union acpi_parse_object *op); -#endif /* ACPI_FUTURE_USAGE */ - -void acpi_ps_set_name(union acpi_parse_object *op, u32 name); - -/* - * psdump - display parser tree - */ -u32 -acpi_ps_sprint_path(char *buffer_start, - u32 buffer_size, union acpi_parse_object *op); - -u32 -acpi_ps_sprint_op(char *buffer_start, - u32 buffer_size, union acpi_parse_object *op); - -void acpi_ps_show(union acpi_parse_object *op); - -#endif /* __ACPARSER_H__ */ diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h index c515ef6cc89..472b7bf0c5d 100644 --- a/include/acpi/acpi.h +++ b/include/acpi/acpi.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Name: acpi.h - Master include file, Publics and external data. + * Name: acpi.h - Master public include file used to interface to ACPICA * *****************************************************************************/ @@ -45,25 +45,22 @@ #define __ACPI_H__ /* - * Common includes for all ACPI driver files - * We put them here because we don't want to duplicate them - * in the rest of the source code again and again. + * Public include files for use by code that will interface to ACPICA. + * + * Information includes the ACPICA data types, names, exceptions, and + * external interface prototypes. Also included are the definitions for + * all ACPI tables (FADT, MADT, etc.) + * + * Note: The order of these include files is important. */ -#include "acnames.h" /* Global ACPI names and strings */ -#include "acconfig.h" /* Configuration constants */ -#include "platform/acenv.h" /* Target environment specific items */ -#include "actypes.h" /* Fundamental common data types */ -#include "acexcep.h" /* ACPI exception codes */ -#include "acmacros.h" /* C macros */ +#include "platform/acenv.h" /* Environment-specific items */ +#include "acnames.h" /* Common ACPI names and strings */ +#include "actypes.h" /* ACPICA data types and structures */ +#include "acexcep.h" /* ACPICA exceptions */ #include "actbl.h" /* ACPI table definitions */ -#include "aclocal.h" /* Internal data types */ #include "acoutput.h" /* Error output and Debug macros */ -#include "acpiosxf.h" /* Interfaces to the ACPI-to-OS layer */ +#include "acrestyp.h" /* Resource Descriptor structs */ +#include "acpiosxf.h" /* OSL interfaces (ACPICA-to-OS) */ #include "acpixf.h" /* ACPI core subsystem external interfaces */ -#include "acobject.h" /* ACPI internal object */ -#include "acstruct.h" /* Common structures */ -#include "acglobal.h" /* All global variables */ -#include "achware.h" /* Hardware defines and interfaces */ -#include "acutils.h" /* Utility interfaces */ #endif /* __ACPI_H__ */ diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index b91440ac0d1..a62720a7edc 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -121,8 +121,11 @@ acpi_os_wait_semaphore(acpi_semaphore handle, u32 units, u16 timeout); acpi_status acpi_os_signal_semaphore(acpi_semaphore handle, u32 units); /* - * Mutex primitives + * Mutex primitives. May be configured to use semaphores instead via + * ACPI_MUTEX_TYPE (see platform/acenv.h) */ +#if (ACPI_MUTEX_TYPE != ACPI_BINARY_SEMAPHORE) + acpi_status acpi_os_create_mutex(acpi_mutex * out_handle); void acpi_os_delete_mutex(acpi_mutex handle); @@ -130,13 +133,7 @@ void acpi_os_delete_mutex(acpi_mutex handle); acpi_status acpi_os_acquire_mutex(acpi_mutex handle, u16 timeout); void acpi_os_release_mutex(acpi_mutex handle); - -/* Temporary macros for Mutex* interfaces, map to existing semaphore xfaces */ - -#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) -#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) -#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) -#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) +#endif /* * Memory allocation and mapping diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 33bc0e3b195..c8e8cf45830 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -45,9 +45,32 @@ #ifndef __ACXFACE_H__ #define __ACXFACE_H__ +/* Current ACPICA subsystem version in YYYYMMDD format */ + +#define ACPI_CA_VERSION 0x20081204 + #include "actypes.h" #include "actbl.h" +extern u8 acpi_gbl_permanent_mmap; + +/* + * Globals that are publically available, allowing for + * run time configuration + */ +extern u32 acpi_dbg_level; +extern u32 acpi_dbg_layer; +extern u8 acpi_gbl_enable_interpreter_slack; +extern u8 acpi_gbl_all_methods_serialized; +extern u8 acpi_gbl_create_osi_method; +extern u8 acpi_gbl_leave_wake_gpes_disabled; +extern acpi_name acpi_gbl_trace_method_name; +extern u32 acpi_gbl_trace_flags; + +extern u32 acpi_current_gpe_count; +extern struct acpi_table_fadt acpi_gbl_FADT; + +extern u32 acpi_rsdt_forced; /* * Global interfaces */ @@ -79,11 +102,6 @@ const char *acpi_format_exception(acpi_status exception); acpi_status acpi_purge_cached_objects(void); -#ifdef ACPI_FUTURE_USAGE -acpi_status -acpi_install_initialization_handler(acpi_init_handler handler, u32 function); -#endif - /* * ACPI Memory management */ @@ -193,9 +211,12 @@ acpi_status acpi_get_id(acpi_handle object, acpi_owner_id * out_type); acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle); /* - * Event handler interfaces + * Handler interfaces */ acpi_status +acpi_install_initialization_handler(acpi_init_handler handler, u32 function); + +acpi_status acpi_install_fixed_event_handler(u32 acpi_event, acpi_event_handler handler, void *context); @@ -227,6 +248,10 @@ acpi_install_gpe_handler(acpi_handle gpe_device, u32 gpe_number, u32 type, acpi_event_handler address, void *context); +acpi_status +acpi_remove_gpe_handler(acpi_handle gpe_device, + u32 gpe_number, acpi_event_handler address); + #ifdef ACPI_FUTURE_USAGE acpi_status acpi_install_exception_handler(acpi_exception_handler handler); #endif @@ -238,10 +263,6 @@ acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle); acpi_status acpi_release_global_lock(u32 handle); -acpi_status -acpi_remove_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, acpi_event_handler address); - acpi_status acpi_enable_event(u32 event, u32 flags); acpi_status acpi_disable_event(u32 event, u32 flags); @@ -250,6 +271,9 @@ acpi_status acpi_clear_event(u32 event); acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); +/* + * GPE Interfaces + */ acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); @@ -263,6 +287,12 @@ acpi_get_gpe_status(acpi_handle gpe_device, u32 gpe_number, u32 flags, acpi_event_status * event_status); +acpi_status acpi_disable_all_gpes(void); + +acpi_status acpi_enable_all_runtime_gpes(void); + +acpi_status acpi_get_gpe_device(u32 gpe_index, acpi_handle *gpe_device); + acpi_status acpi_install_gpe_block(acpi_handle gpe_device, struct acpi_generic_address *gpe_block_address, @@ -313,6 +343,8 @@ acpi_resource_to_address64(struct acpi_resource *resource, /* * Hardware (ACPI device) interfaces */ +acpi_status acpi_reset(void); + acpi_status acpi_get_register(u32 register_id, u32 * return_value); acpi_status acpi_get_register_unlocked(u32 register_id, u32 *return_value); @@ -320,12 +352,14 @@ acpi_status acpi_get_register_unlocked(u32 register_id, u32 *return_value); acpi_status acpi_set_register(u32 register_id, u32 value); acpi_status -acpi_set_firmware_waking_vector(acpi_physical_address physical_address); +acpi_set_firmware_waking_vector(u32 physical_address); -#ifdef ACPI_FUTURE_USAGE acpi_status -acpi_get_firmware_waking_vector(acpi_physical_address * physical_address); -#endif +acpi_set_firmware_waking_vector64(u64 physical_address); + +acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg); + +acpi_status acpi_write(u32 value, struct acpi_generic_address *reg); acpi_status acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b); @@ -340,4 +374,42 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); acpi_status acpi_leave_sleep_state(u8 sleep_state); +/* + * Debug output + */ +void ACPI_INTERNAL_VAR_XFACE +acpi_error(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); + +void ACPI_INTERNAL_VAR_XFACE +acpi_exception(const char *module_name, + u32 line_number, + acpi_status status, const char *format, ...) ACPI_PRINTF_LIKE(4); + +void ACPI_INTERNAL_VAR_XFACE +acpi_warning(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); + +void ACPI_INTERNAL_VAR_XFACE +acpi_info(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); + +#ifdef ACPI_DEBUG_OUTPUT + +void ACPI_INTERNAL_VAR_XFACE +acpi_debug_print(u32 requested_debug_level, + u32 line_number, + const char *function_name, + const char *module_name, + u32 component_id, const char *format, ...) ACPI_PRINTF_LIKE(6); + +void ACPI_INTERNAL_VAR_XFACE +acpi_debug_print_raw(u32 requested_debug_level, + u32 line_number, + const char *function_name, + const char *module_name, + u32 component_id, + const char *format, ...) ACPI_PRINTF_LIKE(6); +#endif + #endif /* __ACXFACE_H__ */ diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h deleted file mode 100644 index 16a9ca9a66e..00000000000 --- a/include/acpi/acpredef.h +++ /dev/null @@ -1,371 +0,0 @@ -/****************************************************************************** - * - * Name: acpredef - Information table for ACPI predefined methods and objects - * $Revision: 1.1 $ - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACPREDEF_H__ -#define __ACPREDEF_H__ - -/****************************************************************************** - * - * Return Package types - * - * 1) PTYPE1 packages do not contain sub-packages. - * - * ACPI_PTYPE1_FIXED: Fixed length, 1 or 2 object types: - * object type - * count - * object type - * count - * - * ACPI_PTYPE1_VAR: Variable length: - * object type (Int/Buf/Ref) - * - * ACPI_PTYPE1_OPTION: Package has some required and some optional elements: - * Used for _PRW - * - * - * 2) PTYPE2 packages contain a variable number of sub-packages. Each of the - * different types describe the contents of each of the sub-packages. - * - * ACPI_PTYPE2: Each subpackage contains 1 or 2 object types: - * object type - * count - * object type - * count - * - * ACPI_PTYPE2_COUNT: Each subpackage has a count as first element: - * object type - * - * ACPI_PTYPE2_PKG_COUNT: Count of subpackages at start, 1 or 2 object types: - * object type - * count - * object type - * count - * - * ACPI_PTYPE2_FIXED: Each subpackage is of fixed length: - * Used for _PRT - * - * ACPI_PTYPE2_MIN: Each subpackage has a variable but minimum length - * Used for _HPX - * - *****************************************************************************/ - -enum acpi_return_package_types { - ACPI_PTYPE1_FIXED = 1, - ACPI_PTYPE1_VAR = 2, - ACPI_PTYPE1_OPTION = 3, - ACPI_PTYPE2 = 4, - ACPI_PTYPE2_COUNT = 5, - ACPI_PTYPE2_PKG_COUNT = 6, - ACPI_PTYPE2_FIXED = 7, - ACPI_PTYPE2_MIN = 8 -}; - -/* - * Predefined method/object information table. - * - * These are the names that can actually be evaluated via acpi_evaluate_object. - * Not present in this table are the following: - * - * 1) Predefined/Reserved names that are never evaluated via acpi_evaluate_object: - * _Lxx and _Exx GPE methods - * _Qxx EC methods - * _T_x compiler temporary variables - * - * 2) Predefined names that never actually exist within the AML code: - * Predefined resource descriptor field names - * - * 3) Predefined names that are implemented within ACPICA: - * _OSI - * - * 4) Some predefined names that are not documented within the ACPI spec. - * _WDG, _WED - * - * The main entries in the table each contain the following items: - * - * Name - The ACPI reserved name - * param_count - Number of arguments to the method - * expected_btypes - Allowed type(s) for the return value. - * 0 means that no return value is expected. - * - * For methods that return packages, the next entry in the table contains - * information about the expected structure of the package. This information - * is saved here (rather than in a separate table) in order to minimize the - * overall size of the stored data. - */ -static const union acpi_predefined_info predefined_names[] = { - {.info = {"_AC0", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC1", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC2", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC3", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC4", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC5", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC6", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC7", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC8", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AC9", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_ADR", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_AL0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL3", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL4", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL5", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL6", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL7", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL8", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_AL9", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_ALC", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_ALI", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_ALP", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_ALR", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* variable (Pkgs) each 2 (Ints) */ - {.info = {"_ALT", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_BBN", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_BCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */ - {.info = {"_BCM", 1, 0}}, - {.info = {"_BDN", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_BFS", 1, 0}}, - {.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, - 9, - ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */ - {.info = {"_BLT", 3, 0}}, - {.info = {"_BMC", 1, 0}}, - {.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */ - {.info = {"_BQC", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_BST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */ - {.info = {"_BTM", 1, ACPI_RTYPE_INTEGER}}, - {.info = {"_BTP", 1, 0}}, - {.info = {"_CBA", 0, ACPI_RTYPE_INTEGER}}, /* see PCI firmware spec 3.0 */ - {.info = {"_CID", 0, - ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_PACKAGE}}, - {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0, 0, 0, 0}}, /* variable (Ints/Strs) */ - {.info = {"_CRS", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_CRT", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_CSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (1 Int(n), n-1 Int) */ - {.info = {"_CST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_PKG_COUNT, - ACPI_RTYPE_BUFFER, 1, - ACPI_RTYPE_INTEGER, 3, 0}}, /* variable (1 Int(n), n Pkg (1 Buf/3 Int) */ - {.info = {"_DCK", 1, ACPI_RTYPE_INTEGER}}, - {.info = {"_DCS", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_DDC", 1, ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER}}, - {.info = {"_DDN", 0, ACPI_RTYPE_STRING}}, - {.info = {"_DGS", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_DIS", 0, 0}}, - {.info = {"_DMA", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_DOD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */ - {.info = {"_DOS", 1, 0}}, - {.info = {"_DSM", 4, ACPI_RTYPE_ALL}}, /* Must return a type, but it can be of any type */ - {.info = {"_DSS", 1, 0}}, - {.info = {"_DSW", 3, 0}}, - {.info = {"_EC_", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_EDL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_EJ0", 1, 0}}, - {.info = {"_EJ1", 1, 0}}, - {.info = {"_EJ2", 1, 0}}, - {.info = {"_EJ3", 1, 0}}, - {.info = {"_EJ4", 1, 0}}, - {.info = {"_EJD", 0, ACPI_RTYPE_STRING}}, - {.info = {"_FDE", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_FDI", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, 0, 0, 0}}, /* fixed (16 Int) */ - {.info = {"_FDM", 1, 0}}, - {.info = {"_FIX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */ - {.info = {"_GLK", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_GPD", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_GPE", 0, ACPI_RTYPE_INTEGER}}, /* _GPE method, not _GPE scope */ - {.info = {"_GSB", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_GTF", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_GTM", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_GTS", 1, 0}}, - {.info = {"_HID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}}, - {.info = {"_HOT", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_HPP", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */ - - /* - * For _HPX, a single package is returned, containing a variable number of sub-packages. - * Each sub-package contains a PCI record setting. There are several different type of - * record settings, of different lengths, but all elements of all settings are Integers. - */ - {.info = {"_HPX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_MIN, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each (var Ints) */ - {.info = {"_IFT", 0, ACPI_RTYPE_INTEGER}}, /* see IPMI spec */ - {.info = {"_INI", 0, 0}}, - {.info = {"_IRC", 0, 0}}, - {.info = {"_LCK", 1, 0}}, - {.info = {"_LID", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_MAT", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_MLS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_STRING, 2, 0, 0, 0}}, /* variable (Pkgs) each (2 Str) */ - {.info = {"_MSG", 1, 0}}, - {.info = {"_OFF", 0, 0}}, - {.info = {"_ON_", 0, 0}}, - {.info = {"_OS_", 0, ACPI_RTYPE_STRING}}, - {.info = {"_OSC", 4, ACPI_RTYPE_BUFFER}}, - {.info = {"_OST", 3, 0}}, - {.info = {"_PCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_PCT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}}, /* fixed (2 Buf) */ - {.info = {"_PDC", 1, 0}}, - {.info = {"_PIC", 1, 0}}, - {.info = {"_PLD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_BUFFER, 0, 0, 0, 0}}, /* variable (Bufs) */ - {.info = {"_PPC", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_PPE", 0, ACPI_RTYPE_INTEGER}}, /* see dig64 spec */ - {.info = {"_PR0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_PR1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_PR2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_PRS", 0, ACPI_RTYPE_BUFFER}}, - - /* - * For _PRT, many BIOSs reverse the 2nd and 3rd Package elements. This bug is so prevalent that there - * is code in the ACPICA Resource Manager to detect this and switch them back. For now, do not allow - * and issue a warning. To allow this and eliminate the warning, add the ACPI_RTYPE_REFERENCE - * type to the 2nd element (index 1) in the statement below. - */ - {.info = {"_PRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_FIXED, 4, - ACPI_RTYPE_INTEGER, - ACPI_RTYPE_INTEGER, - ACPI_RTYPE_INTEGER | ACPI_RTYPE_REFERENCE, ACPI_RTYPE_INTEGER}}, /* variable (Pkgs) each (4): Int,Int,Int/Ref,Int */ - - {.info = {"_PRW", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_OPTION, 2, - ACPI_RTYPE_INTEGER | - ACPI_RTYPE_PACKAGE, - ACPI_RTYPE_INTEGER, ACPI_RTYPE_REFERENCE, 0}}, /* variable (Pkgs) each: Pkg/Int,Int,[variable Refs] (Pkg is Ref/Int) */ - - {.info = {"_PS0", 0, 0}}, - {.info = {"_PS1", 0, 0}}, - {.info = {"_PS2", 0, 0}}, - {.info = {"_PS3", 0, 0}}, - {.info = {"_PSC", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_PSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Pkgs) each (5 Int) with count */ - {.info = {"_PSL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_PSR", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_PSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 6, 0, 0, 0}}, /* variable (Pkgs) each (6 Int) */ - {.info = {"_PSV", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_PSW", 1, 0}}, - {.info = {"_PTC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}}, /* fixed (2 Buf) */ - {.info = {"_PTS", 1, 0}}, - {.info = {"_PXM", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_REG", 2, 0}}, - {.info = {"_REV", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_RMV", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_ROM", 2, ACPI_RTYPE_BUFFER}}, - {.info = {"_RTV", 0, ACPI_RTYPE_INTEGER}}, - - /* - * For _S0_ through _S5_, the ACPI spec defines a return Package containing 1 Integer, - * but most DSDTs have it wrong - 2,3, or 4 integers. Allow this by making the objects "variable length", - * but all elements must be Integers. - */ - {.info = {"_S0_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - {.info = {"_S1_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - {.info = {"_S2_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - {.info = {"_S3_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - {.info = {"_S4_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - {.info = {"_S5_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */ - - {.info = {"_S1D", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S2D", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S3D", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S4D", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S0W", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S1W", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S2W", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S3W", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_S4W", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_SBS", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_SCP", 0x13, 0}}, /* Acpi 1.0 allowed 1 arg. Acpi 3.0 expanded to 3 args. Allow both. */ - /* Note: the 3-arg definition may be removed for ACPI 4.0 */ - {.info = {"_SDD", 1, 0}}, - {.info = {"_SEG", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_SLI", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_SPD", 1, ACPI_RTYPE_INTEGER}}, - {.info = {"_SRS", 1, 0}}, - {.info = {"_SRV", 0, ACPI_RTYPE_INTEGER}}, /* see IPMI spec */ - {.info = {"_SST", 1, 0}}, - {.info = {"_STA", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_STM", 3, 0}}, - {.info = {"_STR", 0, ACPI_RTYPE_BUFFER}}, - {.info = {"_SUN", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_SWS", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TC1", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TC2", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TMP", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TPC", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TPT", 1, 0}}, - {.info = {"_TRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2, - ACPI_RTYPE_INTEGER, 6, 0}}, /* variable (Pkgs) each 2_ref/6_int */ - {.info = {"_TSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each 5_int with count */ - {.info = {"_TSP", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each 5_int */ - {.info = {"_TST", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_TTS", 1, 0}}, - {.info = {"_TZD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */ - {.info = {"_TZM", 0, ACPI_RTYPE_REFERENCE}}, - {.info = {"_TZP", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_UID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}}, - {.info = {"_UPC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */ - {.info = {"_UPD", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_UPP", 0, ACPI_RTYPE_INTEGER}}, - {.info = {"_VPO", 0, ACPI_RTYPE_INTEGER}}, - - /* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */ - - {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}}, - {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */ - {.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */ -}; - -#if 0 - /* Not implemented */ - -{ -"_WDG", 0, ACPI_RTYPE_BUFFER}, /* MS Extension */ - -{ -"_WED", 1, ACPI_RTYPE_PACKAGE}, /* MS Extension */ - - /* This is an internally implemented control method, no need to check */ -{ -"_OSI", 1, ACPI_RTYPE_INTEGER}, - - /* TBD: */ - _PRT - currently ignore reversed entries.attempt to fix here ? - think about code that attempts to fix package elements like _BIF, etc. -#endif -#endif diff --git a/include/acpi/acresrc.h b/include/acpi/acresrc.h deleted file mode 100644 index eef5bd7a59f..00000000000 --- a/include/acpi/acresrc.h +++ /dev/null @@ -1,336 +0,0 @@ -/****************************************************************************** - * - * Name: acresrc.h - Resource Manager function prototypes - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACRESRC_H__ -#define __ACRESRC_H__ - -/* Need the AML resource descriptor structs */ - -#include "amlresrc.h" - -/* - * If possible, pack the following structures to byte alignment, since we - * don't care about performance for debug output. Two cases where we cannot - * pack the structures: - * - * 1) Hardware does not support misaligned memory transfers - * 2) Compiler does not support pointers within packed structures - */ -#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED)) -#pragma pack(1) -#endif - -/* - * Individual entry for the resource conversion tables - */ -typedef const struct acpi_rsconvert_info { - u8 opcode; - u8 resource_offset; - u8 aml_offset; - u8 value; - -} acpi_rsconvert_info; - -/* Resource conversion opcodes */ - -#define ACPI_RSC_INITGET 0 -#define ACPI_RSC_INITSET 1 -#define ACPI_RSC_FLAGINIT 2 -#define ACPI_RSC_1BITFLAG 3 -#define ACPI_RSC_2BITFLAG 4 -#define ACPI_RSC_COUNT 5 -#define ACPI_RSC_COUNT16 6 -#define ACPI_RSC_LENGTH 7 -#define ACPI_RSC_MOVE8 8 -#define ACPI_RSC_MOVE16 9 -#define ACPI_RSC_MOVE32 10 -#define ACPI_RSC_MOVE64 11 -#define ACPI_RSC_SET8 12 -#define ACPI_RSC_DATA8 13 -#define ACPI_RSC_ADDRESS 14 -#define ACPI_RSC_SOURCE 15 -#define ACPI_RSC_SOURCEX 16 -#define ACPI_RSC_BITMASK 17 -#define ACPI_RSC_BITMASK16 18 -#define ACPI_RSC_EXIT_NE 19 -#define ACPI_RSC_EXIT_LE 20 -#define ACPI_RSC_EXIT_EQ 21 - -/* Resource Conversion sub-opcodes */ - -#define ACPI_RSC_COMPARE_AML_LENGTH 0 -#define ACPI_RSC_COMPARE_VALUE 1 - -#define ACPI_RSC_TABLE_SIZE(d) (sizeof (d) / sizeof (struct acpi_rsconvert_info)) - -#define ACPI_RS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_resource,f) -#define AML_OFFSET(f) (u8) ACPI_OFFSET (union aml_resource,f) - -typedef const struct acpi_rsdump_info { - u8 opcode; - u8 offset; - char *name; - const char **pointer; - -} acpi_rsdump_info; - -/* Values for the Opcode field above */ - -#define ACPI_RSD_TITLE 0 -#define ACPI_RSD_LITERAL 1 -#define ACPI_RSD_STRING 2 -#define ACPI_RSD_UINT8 3 -#define ACPI_RSD_UINT16 4 -#define ACPI_RSD_UINT32 5 -#define ACPI_RSD_UINT64 6 -#define ACPI_RSD_1BITFLAG 7 -#define ACPI_RSD_2BITFLAG 8 -#define ACPI_RSD_SHORTLIST 9 -#define ACPI_RSD_LONGLIST 10 -#define ACPI_RSD_DWORDLIST 11 -#define ACPI_RSD_ADDRESS 12 -#define ACPI_RSD_SOURCE 13 - -/* restore default alignment */ - -#pragma pack() - -/* Resource tables indexed by internal resource type */ - -extern const u8 acpi_gbl_aml_resource_sizes[]; -extern struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[]; - -/* Resource tables indexed by raw AML resource descriptor type */ - -extern const u8 acpi_gbl_resource_struct_sizes[]; -extern struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[]; - -struct acpi_vendor_walk_info { - struct acpi_vendor_uuid *uuid; - struct acpi_buffer *buffer; - acpi_status status; -}; - -/* - * rscreate - */ -acpi_status -acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, - struct acpi_buffer *output_buffer); - -acpi_status -acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer, - struct acpi_buffer *output_buffer); - -acpi_status -acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, - struct acpi_buffer *output_buffer); - -/* - * rsutils - */ - -acpi_status -acpi_rs_get_prt_method_data(struct acpi_namespace_node *node, - struct acpi_buffer *ret_buffer); - -acpi_status -acpi_rs_get_crs_method_data(struct acpi_namespace_node *node, - struct acpi_buffer *ret_buffer); - -acpi_status -acpi_rs_get_prs_method_data(struct acpi_namespace_node *node, - struct acpi_buffer *ret_buffer); - -acpi_status -acpi_rs_get_method_data(acpi_handle handle, - char *path, struct acpi_buffer *ret_buffer); - -acpi_status -acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, - struct acpi_buffer *ret_buffer); - -/* - * rscalc - */ -acpi_status -acpi_rs_get_list_length(u8 * aml_buffer, - u32 aml_buffer_length, acpi_size * size_needed); - -acpi_status -acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer, - acpi_size * size_needed); - -acpi_status -acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, - acpi_size * buffer_size_needed); - -acpi_status -acpi_rs_convert_aml_to_resources(u8 * aml, - u32 length, - u32 offset, u8 resource_index, void **context); - -acpi_status -acpi_rs_convert_resources_to_aml(struct acpi_resource *resource, - acpi_size aml_size_needed, u8 * output_buffer); - -/* - * rsaddr - */ -void -acpi_rs_set_address_common(union aml_resource *aml, - struct acpi_resource *resource); - -u8 -acpi_rs_get_address_common(struct acpi_resource *resource, - union aml_resource *aml); - -/* - * rsmisc - */ -acpi_status -acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, - union aml_resource *aml, - struct acpi_rsconvert_info *info); - -acpi_status -acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, - union aml_resource *aml, - struct acpi_rsconvert_info *info); - -/* - * rsutils - */ -void -acpi_rs_move_data(void *destination, - void *source, u16 item_count, u8 move_type); - -u8 acpi_rs_decode_bitmask(u16 mask, u8 * list); - -u16 acpi_rs_encode_bitmask(u8 * list, u8 count); - -acpi_rs_length -acpi_rs_get_resource_source(acpi_rs_length resource_length, - acpi_rs_length minimum_length, - struct acpi_resource_source *resource_source, - union aml_resource *aml, char *string_ptr); - -acpi_rsdesc_size -acpi_rs_set_resource_source(union aml_resource *aml, - acpi_rs_length minimum_length, - struct acpi_resource_source *resource_source); - -void -acpi_rs_set_resource_header(u8 descriptor_type, - acpi_rsdesc_size total_length, - union aml_resource *aml); - -void -acpi_rs_set_resource_length(acpi_rsdesc_size total_length, - union aml_resource *aml); - -/* - * rsdump - */ -void acpi_rs_dump_resource_list(struct acpi_resource *resource); - -void acpi_rs_dump_irq_list(u8 * route_table); - -/* - * Resource conversion tables - */ -extern struct acpi_rsconvert_info acpi_rs_convert_dma[]; -extern struct acpi_rsconvert_info acpi_rs_convert_end_dpf[]; -extern struct acpi_rsconvert_info acpi_rs_convert_io[]; -extern struct acpi_rsconvert_info acpi_rs_convert_fixed_io[]; -extern struct acpi_rsconvert_info acpi_rs_convert_end_tag[]; -extern struct acpi_rsconvert_info acpi_rs_convert_memory24[]; -extern struct acpi_rsconvert_info acpi_rs_convert_generic_reg[]; -extern struct acpi_rsconvert_info acpi_rs_convert_memory32[]; -extern struct acpi_rsconvert_info acpi_rs_convert_fixed_memory32[]; -extern struct acpi_rsconvert_info acpi_rs_convert_address32[]; -extern struct acpi_rsconvert_info acpi_rs_convert_address16[]; -extern struct acpi_rsconvert_info acpi_rs_convert_ext_irq[]; -extern struct acpi_rsconvert_info acpi_rs_convert_address64[]; -extern struct acpi_rsconvert_info acpi_rs_convert_ext_address64[]; - -/* These resources require separate get/set tables */ - -extern struct acpi_rsconvert_info acpi_rs_get_irq[]; -extern struct acpi_rsconvert_info acpi_rs_get_start_dpf[]; -extern struct acpi_rsconvert_info acpi_rs_get_vendor_small[]; -extern struct acpi_rsconvert_info acpi_rs_get_vendor_large[]; - -extern struct acpi_rsconvert_info acpi_rs_set_irq[]; -extern struct acpi_rsconvert_info acpi_rs_set_start_dpf[]; -extern struct acpi_rsconvert_info acpi_rs_set_vendor[]; - -#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER) -/* - * rsinfo - */ -extern struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[]; - -/* - * rsdump - */ -extern struct acpi_rsdump_info acpi_rs_dump_irq[]; -extern struct acpi_rsdump_info acpi_rs_dump_dma[]; -extern struct acpi_rsdump_info acpi_rs_dump_start_dpf[]; -extern struct acpi_rsdump_info acpi_rs_dump_end_dpf[]; -extern struct acpi_rsdump_info acpi_rs_dump_io[]; -extern struct acpi_rsdump_info acpi_rs_dump_fixed_io[]; -extern struct acpi_rsdump_info acpi_rs_dump_vendor[]; -extern struct acpi_rsdump_info acpi_rs_dump_end_tag[]; -extern struct acpi_rsdump_info acpi_rs_dump_memory24[]; -extern struct acpi_rsdump_info acpi_rs_dump_memory32[]; -extern struct acpi_rsdump_info acpi_rs_dump_fixed_memory32[]; -extern struct acpi_rsdump_info acpi_rs_dump_address16[]; -extern struct acpi_rsdump_info acpi_rs_dump_address32[]; -extern struct acpi_rsdump_info acpi_rs_dump_address64[]; -extern struct acpi_rsdump_info acpi_rs_dump_ext_address64[]; -extern struct acpi_rsdump_info acpi_rs_dump_ext_irq[]; -extern struct acpi_rsdump_info acpi_rs_dump_generic_reg[]; -#endif - -#endif /* __ACRESRC_H__ */ diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h new file mode 100644 index 00000000000..9ffe00feada --- /dev/null +++ b/include/acpi/acrestyp.h @@ -0,0 +1,405 @@ +/****************************************************************************** + * + * Name: acrestyp.h - Defines, types, and structures for resource descriptors + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef __ACRESTYP_H__ +#define __ACRESTYP_H__ + +/* + * Definitions for Resource Attributes + */ +typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */ +typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */ + +/* + * Memory Attributes + */ +#define ACPI_READ_ONLY_MEMORY (u8) 0x00 +#define ACPI_READ_WRITE_MEMORY (u8) 0x01 + +#define ACPI_NON_CACHEABLE_MEMORY (u8) 0x00 +#define ACPI_CACHABLE_MEMORY (u8) 0x01 +#define ACPI_WRITE_COMBINING_MEMORY (u8) 0x02 +#define ACPI_PREFETCHABLE_MEMORY (u8) 0x03 + +/* + * IO Attributes + * The ISA IO ranges are: n000-n0_fFh, n400-n4_fFh, n800-n8_fFh, n_c00-n_cFFh. + * The non-ISA IO ranges are: n100-n3_fFh, n500-n7_fFh, n900-n_bFFh, n_cd0-n_fFFh. + */ +#define ACPI_NON_ISA_ONLY_RANGES (u8) 0x01 +#define ACPI_ISA_ONLY_RANGES (u8) 0x02 +#define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES) + +/* Type of translation - 1=Sparse, 0=Dense */ + +#define ACPI_SPARSE_TRANSLATION (u8) 0x01 + +/* + * IO Port Descriptor Decode + */ +#define ACPI_DECODE_10 (u8) 0x00 /* 10-bit IO address decode */ +#define ACPI_DECODE_16 (u8) 0x01 /* 16-bit IO address decode */ + +/* + * IRQ Attributes + */ +#define ACPI_LEVEL_SENSITIVE (u8) 0x00 +#define ACPI_EDGE_SENSITIVE (u8) 0x01 + +#define ACPI_ACTIVE_HIGH (u8) 0x00 +#define ACPI_ACTIVE_LOW (u8) 0x01 + +#define ACPI_EXCLUSIVE (u8) 0x00 +#define ACPI_SHARED (u8) 0x01 + +/* + * DMA Attributes + */ +#define ACPI_COMPATIBILITY (u8) 0x00 +#define ACPI_TYPE_A (u8) 0x01 +#define ACPI_TYPE_B (u8) 0x02 +#define ACPI_TYPE_F (u8) 0x03 + +#define ACPI_NOT_BUS_MASTER (u8) 0x00 +#define ACPI_BUS_MASTER (u8) 0x01 + +#define ACPI_TRANSFER_8 (u8) 0x00 +#define ACPI_TRANSFER_8_16 (u8) 0x01 +#define ACPI_TRANSFER_16 (u8) 0x02 + +/* + * Start Dependent Functions Priority definitions + */ +#define ACPI_GOOD_CONFIGURATION (u8) 0x00 +#define ACPI_ACCEPTABLE_CONFIGURATION (u8) 0x01 +#define ACPI_SUB_OPTIMAL_CONFIGURATION (u8) 0x02 + +/* + * 16, 32 and 64-bit Address Descriptor resource types + */ +#define ACPI_MEMORY_RANGE (u8) 0x00 +#define ACPI_IO_RANGE (u8) 0x01 +#define ACPI_BUS_NUMBER_RANGE (u8) 0x02 + +#define ACPI_ADDRESS_NOT_FIXED (u8) 0x00 +#define ACPI_ADDRESS_FIXED (u8) 0x01 + +#define ACPI_POS_DECODE (u8) 0x00 +#define ACPI_SUB_DECODE (u8) 0x01 + +#define ACPI_PRODUCER (u8) 0x00 +#define ACPI_CONSUMER (u8) 0x01 + +/* + * If possible, pack the following structures to byte alignment + */ +#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED +#pragma pack(1) +#endif + +/* UUID data structures for use in vendor-defined resource descriptors */ + +struct acpi_uuid { + u8 data[ACPI_UUID_LENGTH]; +}; + +struct acpi_vendor_uuid { + u8 subtype; + u8 data[ACPI_UUID_LENGTH]; +}; + +/* + * Structures used to describe device resources + */ +struct acpi_resource_irq { + u8 descriptor_length; + u8 triggering; + u8 polarity; + u8 sharable; + u8 interrupt_count; + u8 interrupts[1]; +}; + +struct acpi_resource_dma { + u8 type; + u8 bus_master; + u8 transfer; + u8 channel_count; + u8 channels[1]; +}; + +struct acpi_resource_start_dependent { + u8 descriptor_length; + u8 compatibility_priority; + u8 performance_robustness; +}; + +/* + * The END_DEPENDENT_FUNCTIONS_RESOURCE struct is not + * needed because it has no fields + */ + +struct acpi_resource_io { + u8 io_decode; + u8 alignment; + u8 address_length; + u16 minimum; + u16 maximum; +}; + +struct acpi_resource_fixed_io { + u16 address; + u8 address_length; +}; + +struct acpi_resource_vendor { + u16 byte_length; + u8 byte_data[1]; +}; + +/* Vendor resource with UUID info (introduced in ACPI 3.0) */ + +struct acpi_resource_vendor_typed { + u16 byte_length; + u8 uuid_subtype; + u8 uuid[ACPI_UUID_LENGTH]; + u8 byte_data[1]; +}; + +struct acpi_resource_end_tag { + u8 checksum; +}; + +struct acpi_resource_memory24 { + u8 write_protect; + u16 minimum; + u16 maximum; + u16 alignment; + u16 address_length; +}; + +struct acpi_resource_memory32 { + u8 write_protect; + u32 minimum; + u32 maximum; + u32 alignment; + u32 address_length; +}; + +struct acpi_resource_fixed_memory32 { + u8 write_protect; + u32 address; + u32 address_length; +}; + +struct acpi_memory_attribute { + u8 write_protect; + u8 caching; + u8 range_type; + u8 translation; +}; + +struct acpi_io_attribute { + u8 range_type; + u8 translation; + u8 translation_type; + u8 reserved1; +}; + +union acpi_resource_attribute { + struct acpi_memory_attribute mem; + struct acpi_io_attribute io; + + /* Used for the *word_space macros */ + + u8 type_specific; +}; + +struct acpi_resource_source { + u8 index; + u16 string_length; + char *string_ptr; +}; + +/* Fields common to all address descriptors, 16/32/64 bit */ + +#define ACPI_RESOURCE_ADDRESS_COMMON \ + u8 resource_type; \ + u8 producer_consumer; \ + u8 decode; \ + u8 min_address_fixed; \ + u8 max_address_fixed; \ + union acpi_resource_attribute info; + +struct acpi_resource_address { +ACPI_RESOURCE_ADDRESS_COMMON}; + +struct acpi_resource_address16 { + ACPI_RESOURCE_ADDRESS_COMMON u16 granularity; + u16 minimum; + u16 maximum; + u16 translation_offset; + u16 address_length; + struct acpi_resource_source resource_source; +}; + +struct acpi_resource_address32 { + ACPI_RESOURCE_ADDRESS_COMMON u32 granularity; + u32 minimum; + u32 maximum; + u32 translation_offset; + u32 address_length; + struct acpi_resource_source resource_source; +}; + +struct acpi_resource_address64 { + ACPI_RESOURCE_ADDRESS_COMMON u64 granularity; + u64 minimum; + u64 maximum; + u64 translation_offset; + u64 address_length; + struct acpi_resource_source resource_source; +}; + +struct acpi_resource_extended_address64 { + ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD; + u64 granularity; + u64 minimum; + u64 maximum; + u64 translation_offset; + u64 address_length; + u64 type_specific; +}; + +struct acpi_resource_extended_irq { + u8 producer_consumer; + u8 triggering; + u8 polarity; + u8 sharable; + u8 interrupt_count; + struct acpi_resource_source resource_source; + u32 interrupts[1]; +}; + +struct acpi_resource_generic_register { + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_size; + u64 address; +}; + +/* ACPI_RESOURCE_TYPEs */ + +#define ACPI_RESOURCE_TYPE_IRQ 0 +#define ACPI_RESOURCE_TYPE_DMA 1 +#define ACPI_RESOURCE_TYPE_START_DEPENDENT 2 +#define ACPI_RESOURCE_TYPE_END_DEPENDENT 3 +#define ACPI_RESOURCE_TYPE_IO 4 +#define ACPI_RESOURCE_TYPE_FIXED_IO 5 +#define ACPI_RESOURCE_TYPE_VENDOR 6 +#define ACPI_RESOURCE_TYPE_END_TAG 7 +#define ACPI_RESOURCE_TYPE_MEMORY24 8 +#define ACPI_RESOURCE_TYPE_MEMORY32 9 +#define ACPI_RESOURCE_TYPE_FIXED_MEMORY32 10 +#define ACPI_RESOURCE_TYPE_ADDRESS16 11 +#define ACPI_RESOURCE_TYPE_ADDRESS32 12 +#define ACPI_RESOURCE_TYPE_ADDRESS64 13 +#define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 14 /* ACPI 3.0 */ +#define ACPI_RESOURCE_TYPE_EXTENDED_IRQ 15 +#define ACPI_RESOURCE_TYPE_GENERIC_REGISTER 16 +#define ACPI_RESOURCE_TYPE_MAX 16 + +/* Master union for resource descriptors */ + +union acpi_resource_data { + struct acpi_resource_irq irq; + struct acpi_resource_dma dma; + struct acpi_resource_start_dependent start_dpf; + struct acpi_resource_io io; + struct acpi_resource_fixed_io fixed_io; + struct acpi_resource_vendor vendor; + struct acpi_resource_vendor_typed vendor_typed; + struct acpi_resource_end_tag end_tag; + struct acpi_resource_memory24 memory24; + struct acpi_resource_memory32 memory32; + struct acpi_resource_fixed_memory32 fixed_memory32; + struct acpi_resource_address16 address16; + struct acpi_resource_address32 address32; + struct acpi_resource_address64 address64; + struct acpi_resource_extended_address64 ext_address64; + struct acpi_resource_extended_irq extended_irq; + struct acpi_resource_generic_register generic_reg; + + /* Common fields */ + + struct acpi_resource_address address; /* Common 16/32/64 address fields */ +}; + +/* Common resource header */ + +struct acpi_resource { + u32 type; + u32 length; + union acpi_resource_data data; +}; + +/* restore default alignment */ + +#pragma pack() + +#define ACPI_RS_SIZE_NO_DATA 8 /* Id + Length fields */ +#define ACPI_RS_SIZE_MIN (u32) ACPI_ROUND_UP_TO_NATIVE_WORD (12) +#define ACPI_RS_SIZE(type) (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type)) + +#define ACPI_NEXT_RESOURCE(res) (struct acpi_resource *)((u8 *) res + res->length) + +struct acpi_pci_routing_table { + u32 length; + u32 pin; + acpi_integer address; /* here for 64-bit alignment */ + u32 source_index; + char source[4]; /* pad to 64 bits so sizeof() works in all cases */ +}; + +#endif /* __ACRESTYP_H__ */ diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h deleted file mode 100644 index 7980a26bad3..00000000000 --- a/include/acpi/acstruct.h +++ /dev/null @@ -1,228 +0,0 @@ -/****************************************************************************** - * - * Name: acstruct.h - Internal structs - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACSTRUCT_H__ -#define __ACSTRUCT_H__ - -/* acpisrc:struct_defs -- for acpisrc conversion */ - -/***************************************************************************** - * - * Tree walking typedefs and structs - * - ****************************************************************************/ - -/* - * Walk state - current state of a parse tree walk. Used for both a leisurely - * stroll through the tree (for whatever reason), and for control method - * execution. - */ -#define ACPI_NEXT_OP_DOWNWARD 1 -#define ACPI_NEXT_OP_UPWARD 2 - -/* - * Groups of definitions for walk_type used for different implementations of - * walkers (never simultaneously) - flags for interpreter: - */ -#define ACPI_WALK_NON_METHOD 0 -#define ACPI_WALK_METHOD 0x01 -#define ACPI_WALK_METHOD_RESTART 0x02 - -/* Flags for i_aSL compiler only */ - -#define ACPI_WALK_CONST_REQUIRED 0x10 -#define ACPI_WALK_CONST_OPTIONAL 0x20 - -struct acpi_walk_state { - struct acpi_walk_state *next; /* Next walk_state in list */ - u8 descriptor_type; /* To differentiate various internal objs */ - u8 walk_type; - u16 opcode; /* Current AML opcode */ - u8 next_op_info; /* Info about next_op */ - u8 num_operands; /* Stack pointer for Operands[] array */ - u8 operand_index; /* Index into operand stack, to be used by acpi_ds_obj_stack_push */ - acpi_owner_id owner_id; /* Owner of objects created during the walk */ - u8 last_predicate; /* Result of last predicate */ - u8 current_result; - u8 return_used; - u8 scope_depth; - u8 pass_number; /* Parse pass during table load */ - u8 result_size; /* Total elements for the result stack */ - u8 result_count; /* Current number of occupied elements of result stack */ - u32 aml_offset; - u32 arg_types; - u32 method_breakpoint; /* For single stepping */ - u32 user_breakpoint; /* User AML breakpoint */ - u32 parse_flags; - - struct acpi_parse_state parser_state; /* Current state of parser */ - u32 prev_arg_types; - u32 arg_count; /* push for fixed or var args */ - - struct acpi_namespace_node arguments[ACPI_METHOD_NUM_ARGS]; /* Control method arguments */ - struct acpi_namespace_node local_variables[ACPI_METHOD_NUM_LOCALS]; /* Control method locals */ - union acpi_operand_object *operands[ACPI_OBJ_NUM_OPERANDS + 1]; /* Operands passed to the interpreter (+1 for NULL terminator) */ - union acpi_operand_object **params; - - u8 *aml_last_while; - union acpi_operand_object **caller_return_desc; - union acpi_generic_state *control_state; /* List of control states (nested IFs) */ - struct acpi_namespace_node *deferred_node; /* Used when executing deferred opcodes */ - union acpi_operand_object *implicit_return_obj; - struct acpi_namespace_node *method_call_node; /* Called method Node */ - union acpi_parse_object *method_call_op; /* method_call Op if running a method */ - union acpi_operand_object *method_desc; /* Method descriptor if running a method */ - struct acpi_namespace_node *method_node; /* Method node if running a method. */ - union acpi_parse_object *op; /* Current parser op */ - const struct acpi_opcode_info *op_info; /* Info on current opcode */ - union acpi_parse_object *origin; /* Start of walk [Obsolete] */ - union acpi_operand_object *result_obj; - union acpi_generic_state *results; /* Stack of accumulated results */ - union acpi_operand_object *return_desc; /* Return object, if any */ - union acpi_generic_state *scope_info; /* Stack of nested scopes */ - union acpi_parse_object *prev_op; /* Last op that was processed */ - union acpi_parse_object *next_op; /* next op to be processed */ - struct acpi_thread_state *thread; - acpi_parse_downwards descending_callback; - acpi_parse_upwards ascending_callback; -}; - -/* Info used by acpi_ps_init_objects */ - -struct acpi_init_walk_info { - u16 method_count; - u16 device_count; - u16 op_region_count; - u16 field_count; - u16 buffer_count; - u16 package_count; - u16 op_region_init; - u16 field_init; - u16 buffer_init; - u16 package_init; - u16 object_count; - acpi_owner_id owner_id; - u32 table_index; -}; - -struct acpi_get_devices_info { - acpi_walk_callback user_function; - void *context; - const char *hid; -}; - -union acpi_aml_operands { - union acpi_operand_object *operands[7]; - - struct { - struct acpi_object_integer *type; - struct acpi_object_integer *code; - struct acpi_object_integer *argument; - - } fatal; - - struct { - union acpi_operand_object *source; - struct acpi_object_integer *index; - union acpi_operand_object *target; - - } index; - - struct { - union acpi_operand_object *source; - struct acpi_object_integer *index; - struct acpi_object_integer *length; - union acpi_operand_object *target; - - } mid; -}; - -/* - * Structure used to pass object evaluation parameters. - * Purpose is to reduce CPU stack use. - */ -struct acpi_evaluate_info { - struct acpi_namespace_node *prefix_node; - char *pathname; - union acpi_operand_object *obj_desc; - union acpi_operand_object **parameters; - struct acpi_namespace_node *resolved_node; - union acpi_operand_object *return_object; - u8 param_count; - u8 pass_number; - u8 return_object_type; - u8 flags; -}; - -/* Values for Flags above */ - -#define ACPI_IGNORE_RETURN_VALUE 1 - -/* Info used by acpi_ns_initialize_devices */ - -struct acpi_device_walk_info { - u16 device_count; - u16 num_STA; - u16 num_INI; - struct acpi_table_desc *table_desc; - struct acpi_evaluate_info *evaluate_info; -}; - -/* TBD: [Restructure] Merge with struct above */ - -struct acpi_walk_info { - u32 debug_level; - u32 count; - acpi_owner_id owner_id; - u8 display_type; -}; - -/* Display Types */ - -#define ACPI_DISPLAY_SUMMARY (u8) 0 -#define ACPI_DISPLAY_OBJECTS (u8) 1 -#define ACPI_DISPLAY_MASK (u8) 1 - -#define ACPI_DISPLAY_SHORT (u8) 2 - -#endif diff --git a/include/acpi/actables.h b/include/acpi/actables.h deleted file mode 100644 index 0cbe1b9ab52..00000000000 --- a/include/acpi/actables.h +++ /dev/null @@ -1,115 +0,0 @@ -/****************************************************************************** - * - * Name: actables.h - ACPI table management - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACTABLES_H__ -#define __ACTABLES_H__ - -acpi_status acpi_allocate_root_table(u32 initial_table_count); - -/* - * tbfadt - FADT parse/convert/validate - */ -void acpi_tb_parse_fadt(u32 table_index, u8 flags); - -void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length); - -/* - * tbfind - find ACPI table - */ -acpi_status -acpi_tb_find_table(char *signature, - char *oem_id, char *oem_table_id, u32 *table_index); - -/* - * tbinstal - Table removal and deletion - */ -acpi_status acpi_tb_resize_root_table_list(void); - -acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); - -acpi_status -acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); - -acpi_status -acpi_tb_store_table(acpi_physical_address address, - struct acpi_table_header *table, - u32 length, u8 flags, u32 *table_index); - -void acpi_tb_delete_table(struct acpi_table_desc *table_desc); - -void acpi_tb_terminate(void); - -void acpi_tb_delete_namespace_by_owner(u32 table_index); - -acpi_status acpi_tb_allocate_owner_id(u32 table_index); - -acpi_status acpi_tb_release_owner_id(u32 table_index); - -acpi_status acpi_tb_get_owner_id(u32 table_index, acpi_owner_id *owner_id); - -u8 acpi_tb_is_table_loaded(u32 table_index); - -void acpi_tb_set_table_loaded_flag(u32 table_index, u8 is_loaded); - -/* - * tbutils - table manager utilities - */ -u8 acpi_tb_tables_loaded(void); - -void -acpi_tb_print_table_header(acpi_physical_address address, - struct acpi_table_header *header); - -u8 acpi_tb_checksum(u8 *buffer, u32 length); - -acpi_status -acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length); - -void -acpi_tb_install_table(acpi_physical_address address, - u8 flags, char *signature, u32 table_index); - -acpi_status -acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); - -#endif /* __ACTABLES_H__ */ diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 13a3d9ad92d..bf8d4cfd8cf 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -245,7 +245,7 @@ struct acpi_table_fadt { #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */ #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */ #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */ -#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */ +#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup possible from S4 */ #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */ #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */ #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */ @@ -288,6 +288,31 @@ enum acpi_prefered_pm_profiles { #define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f) +union acpi_name_union { + u32 integer; + char ascii[4]; +}; + +/* + * Internal ACPI Table Descriptor. One per ACPI table + */ +struct acpi_table_desc { + acpi_physical_address address; + struct acpi_table_header *pointer; + u32 length; /* Length fixed at 32 bits */ + union acpi_name_union signature; + acpi_owner_id owner_id; + u8 flags; +}; + +/* Flags for above */ + +#define ACPI_TABLE_ORIGIN_UNKNOWN (0) +#define ACPI_TABLE_ORIGIN_MAPPED (1) +#define ACPI_TABLE_ORIGIN_ALLOCATED (2) +#define ACPI_TABLE_ORIGIN_MASK (3) +#define ACPI_TABLE_IS_LOADED (4) + /* * Get the remaining ACPI tables */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 63f5b4cf4de..18963b96811 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -627,7 +627,7 @@ struct acpi_hest_aer_common { u32 uncorrectable_error_mask; u32 uncorrectable_error_severity; u32 correctable_error_mask; - u32 advanced_error_cababilities; + u32 advanced_error_capabilities; }; /* Hardware Error Notification */ diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 7220361790b..a20aab51017 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -204,11 +204,10 @@ typedef u32 acpi_physical_address; /******************************************************************************* * - * OS-dependent and compiler-dependent types + * OS-dependent types * * If the defaults below are not appropriate for the host system, they can - * be defined in the compiler-specific or OS-specific header, and this will - * take precedence. + * be defined in the OS-specific header, and this will take precedence. * ******************************************************************************/ @@ -218,12 +217,6 @@ typedef u32 acpi_physical_address; #define acpi_thread_id acpi_size #endif -/* Object returned from acpi_os_create_lock */ - -#ifndef acpi_spinlock -#define acpi_spinlock void * -#endif - /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ #ifndef acpi_cpu_flags @@ -233,9 +226,51 @@ typedef u32 acpi_physical_address; /* Object returned from acpi_os_create_cache */ #ifndef acpi_cache_t +#ifdef ACPI_USE_LOCAL_CACHE #define acpi_cache_t struct acpi_memory_list +#else +#define acpi_cache_t void * +#endif +#endif + +/* + * Synchronization objects - Mutexes, Semaphores, and spin_locks + */ +#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) +/* + * These macros are used if the host OS does not support a mutex object. + * Map the OSL Mutex interfaces to binary semaphores. + */ +#define acpi_mutex acpi_semaphore +#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) +#define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) +#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) +#define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) +#endif + +/* Configurable types for synchronization objects */ + +#ifndef acpi_spinlock +#define acpi_spinlock void * +#endif + +#ifndef acpi_semaphore +#define acpi_semaphore void * +#endif + +#ifndef acpi_mutex +#define acpi_mutex void * #endif +/******************************************************************************* + * + * Compiler-dependent types + * + * If the defaults below are not appropriate for the host compiler, they can + * be defined in the compiler-specific header, and this will take precedence. + * + ******************************************************************************/ + /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ #ifndef acpi_uintptr_t @@ -268,6 +303,43 @@ typedef u32 acpi_physical_address; #define ACPI_EXPORT_SYMBOL(symbol) #endif +/****************************************************************************** + * + * ACPI Specification constants (Do not change unless the specification changes) + * + *****************************************************************************/ + +/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ + +#define ACPI_MAX_GPE_BLOCKS 2 + +/* Default ACPI register widths */ + +#define ACPI_GPE_REGISTER_WIDTH 8 +#define ACPI_PM1_REGISTER_WIDTH 16 +#define ACPI_PM2_REGISTER_WIDTH 8 +#define ACPI_PM_TIMER_WIDTH 32 + +/* Names within the namespace are 4 bytes long */ + +#define ACPI_NAME_SIZE 4 +#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ +#define ACPI_PATH_SEPARATOR '.' + +/* Sizes for ACPI table headers */ + +#define ACPI_OEM_ID_SIZE 6 +#define ACPI_OEM_TABLE_ID_SIZE 8 + +/* ACPI/PNP hardware IDs */ + +#define PCI_ROOT_HID_STRING "PNP0A03" +#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" + +/* PM Timer ticks per second (HZ) */ + +#define PM_TIMER_FREQUENCY 3579545 + /******************************************************************************* * * Independent types @@ -291,13 +363,18 @@ typedef u32 acpi_physical_address; #endif /* - * Mescellaneous types + * Miscellaneous types */ typedef u32 acpi_status; /* All ACPI Exceptions */ typedef u32 acpi_name; /* 4-byte ACPI name */ typedef char *acpi_string; /* Null terminated ASCII string */ typedef void *acpi_handle; /* Actually a ptr to a NS Node */ +/* Owner IDs are used to track namespace nodes for selective deletion */ + +typedef u8 acpi_owner_id; +#define ACPI_OWNER_ID_MAX 0xFF + struct uint64_struct { u32 lo; u32 hi; @@ -313,13 +390,8 @@ struct uint32_struct { u32 hi; }; -/* Synchronization objects */ - -#define acpi_mutex void * -#define acpi_semaphore void * - /* - * Acpi integer width. In ACPI version 1, integers are 32 bits. In ACPI + * Acpi integer width. In ACPI version 1, integers are 32 bits. In ACPI * version 2, integers are 64 bits. Note that this pertains to the ACPI integer * type only, not other integers used in the implementation of the ACPI CA * subsystem. @@ -338,10 +410,75 @@ typedef unsigned long long acpi_integer; #define ACPI_MAX16_DECIMAL_DIGITS 5 #define ACPI_MAX8_DECIMAL_DIGITS 3 +/* PM Timer ticks per second (HZ) */ + +#define PM_TIMER_FREQUENCY 3579545 + /* * Constants with special meanings */ #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) +#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ +#define ACPI_DO_NOT_WAIT 0 + +/******************************************************************************* + * + * Commonly used macros + * + ******************************************************************************/ + +/* Data manipulation */ + +#define ACPI_LOWORD(l) ((u16)(u32)(l)) +#define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) +#define ACPI_LOBYTE(l) ((u8)(u16)(l)) +#define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) + +/* Full 64-bit integer must be available on both 32-bit and 64-bit platforms */ + +struct acpi_integer_overlay { + u32 lo_dword; + u32 hi_dword; +}; + +#define ACPI_LODWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword) +#define ACPI_HIDWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword) + +#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) +#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) +#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) +#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) + +/* Size calculation */ + +#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) + +/* Pointer manipulation */ + +#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) +#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) +#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) +#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) + +/* Pointer/Integer type conversions */ + +#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) +#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) +#define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) +#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) +#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) + +#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED +#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) +#else +#define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) +#endif + +/******************************************************************************* + * + * Miscellaneous constants + * + ******************************************************************************/ /* * Initialization sequence @@ -414,7 +551,7 @@ typedef unsigned long long acpi_integer; #define ACPI_NOTIFY_MAX 0x0B /* - * Types associated with ACPI names and objects. The first group of + * Types associated with ACPI names and objects. The first group of * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition * of the ACPI object_type() operator (See the ACPI Spec). Therefore, * only add to the first group if the spec changes. @@ -467,7 +604,7 @@ typedef u32 acpi_object_type; /* * These are special object types that never appear in - * a Namespace node, only in an union acpi_operand_object + * a Namespace node, only in a union acpi_operand_object */ #define ACPI_TYPE_LOCAL_EXTRA 0x1C #define ACPI_TYPE_LOCAL_DATA 0x1D @@ -732,6 +869,15 @@ struct acpi_buffer { #define ACPI_NAME_TYPE_MAX 1 /* + * Predefined Namespace items + */ +struct acpi_predefined_names { + char *name; + u8 type; + char *val; +}; + +/* * Structure and flags for acpi_get_system_info */ #define ACPI_SYS_MODE_UNKNOWN 0x0000 @@ -787,7 +933,7 @@ acpi_status(*acpi_exception_handler) (acpi_status aml_status, u16 opcode, u32 aml_offset, void *context); -/* Table Event handler (Load, load_table etc) and types */ +/* Table Event handler (Load, load_table, etc.) and types */ typedef acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context); @@ -823,6 +969,12 @@ acpi_status(*acpi_walk_callback) (acpi_handle obj_handle, #define ACPI_INTERRUPT_NOT_HANDLED 0x00 #define ACPI_INTERRUPT_HANDLED 0x01 +/* Length of _HID, _UID, _CID, and UUID values */ + +#define ACPI_DEVICE_ID_LENGTH 0x09 +#define ACPI_MAX_CID_LENGTH 48 +#define ACPI_UUID_LENGTH 16 + /* Common string version of device HIDs and UIDs */ struct acpica_device_id { @@ -900,357 +1052,28 @@ struct acpi_mem_space_context { }; /* - * Definitions for Resource Attributes - */ -typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */ -typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */ - -/* - * Memory Attributes - */ -#define ACPI_READ_ONLY_MEMORY (u8) 0x00 -#define ACPI_READ_WRITE_MEMORY (u8) 0x01 - -#define ACPI_NON_CACHEABLE_MEMORY (u8) 0x00 -#define ACPI_CACHABLE_MEMORY (u8) 0x01 -#define ACPI_WRITE_COMBINING_MEMORY (u8) 0x02 -#define ACPI_PREFETCHABLE_MEMORY (u8) 0x03 - -/* - * IO Attributes - * The ISA IO ranges are: n000-n0_fFh, n400-n4_fFh, n800-n8_fFh, n_c00-n_cFFh. - * The non-ISA IO ranges are: n100-n3_fFh, n500-n7_fFh, n900-n_bFFh, n_cd0-n_fFFh. + * struct acpi_memory_list is used only if the ACPICA local cache is enabled */ -#define ACPI_NON_ISA_ONLY_RANGES (u8) 0x01 -#define ACPI_ISA_ONLY_RANGES (u8) 0x02 -#define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES) - -/* Type of translation - 1=Sparse, 0=Dense */ - -#define ACPI_SPARSE_TRANSLATION (u8) 0x01 - -/* - * IO Port Descriptor Decode - */ -#define ACPI_DECODE_10 (u8) 0x00 /* 10-bit IO address decode */ -#define ACPI_DECODE_16 (u8) 0x01 /* 16-bit IO address decode */ - -/* - * IRQ Attributes - */ -#define ACPI_LEVEL_SENSITIVE (u8) 0x00 -#define ACPI_EDGE_SENSITIVE (u8) 0x01 - -#define ACPI_ACTIVE_HIGH (u8) 0x00 -#define ACPI_ACTIVE_LOW (u8) 0x01 - -#define ACPI_EXCLUSIVE (u8) 0x00 -#define ACPI_SHARED (u8) 0x01 - -/* - * DMA Attributes - */ -#define ACPI_COMPATIBILITY (u8) 0x00 -#define ACPI_TYPE_A (u8) 0x01 -#define ACPI_TYPE_B (u8) 0x02 -#define ACPI_TYPE_F (u8) 0x03 - -#define ACPI_NOT_BUS_MASTER (u8) 0x00 -#define ACPI_BUS_MASTER (u8) 0x01 - -#define ACPI_TRANSFER_8 (u8) 0x00 -#define ACPI_TRANSFER_8_16 (u8) 0x01 -#define ACPI_TRANSFER_16 (u8) 0x02 - -/* - * Start Dependent Functions Priority definitions - */ -#define ACPI_GOOD_CONFIGURATION (u8) 0x00 -#define ACPI_ACCEPTABLE_CONFIGURATION (u8) 0x01 -#define ACPI_SUB_OPTIMAL_CONFIGURATION (u8) 0x02 - -/* - * 16, 32 and 64-bit Address Descriptor resource types - */ -#define ACPI_MEMORY_RANGE (u8) 0x00 -#define ACPI_IO_RANGE (u8) 0x01 -#define ACPI_BUS_NUMBER_RANGE (u8) 0x02 - -#define ACPI_ADDRESS_NOT_FIXED (u8) 0x00 -#define ACPI_ADDRESS_FIXED (u8) 0x01 - -#define ACPI_POS_DECODE (u8) 0x00 -#define ACPI_SUB_DECODE (u8) 0x01 - -#define ACPI_PRODUCER (u8) 0x00 -#define ACPI_CONSUMER (u8) 0x01 - -/* - * If possible, pack the following structures to byte alignment - */ -#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED -#pragma pack(1) +struct acpi_memory_list { + char *list_name; + void *list_head; + u16 object_size; + u16 max_depth; + u16 current_depth; + u16 link_offset; + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + + /* Statistics for debug memory tracking only */ + + u32 total_allocated; + u32 total_freed; + u32 max_occupied; + u32 total_size; + u32 current_total_size; + u32 requests; + u32 hits; #endif - -/* UUID data structures for use in vendor-defined resource descriptors */ - -struct acpi_uuid { - u8 data[ACPI_UUID_LENGTH]; -}; - -struct acpi_vendor_uuid { - u8 subtype; - u8 data[ACPI_UUID_LENGTH]; -}; - -/* - * Structures used to describe device resources - */ -struct acpi_resource_irq { - u8 descriptor_length; - u8 triggering; - u8 polarity; - u8 sharable; - u8 interrupt_count; - u8 interrupts[1]; -}; - -struct acpi_resource_dma { - u8 type; - u8 bus_master; - u8 transfer; - u8 channel_count; - u8 channels[1]; -}; - -struct acpi_resource_start_dependent { - u8 descriptor_length; - u8 compatibility_priority; - u8 performance_robustness; -}; - -/* - * END_DEPENDENT_FUNCTIONS_RESOURCE struct is not - * needed because it has no fields - */ - -struct acpi_resource_io { - u8 io_decode; - u8 alignment; - u8 address_length; - u16 minimum; - u16 maximum; -}; - -struct acpi_resource_fixed_io { - u16 address; - u8 address_length; -}; - -struct acpi_resource_vendor { - u16 byte_length; - u8 byte_data[1]; -}; - -/* Vendor resource with UUID info (introduced in ACPI 3.0) */ - -struct acpi_resource_vendor_typed { - u16 byte_length; - u8 uuid_subtype; - u8 uuid[ACPI_UUID_LENGTH]; - u8 byte_data[1]; -}; - -struct acpi_resource_end_tag { - u8 checksum; -}; - -struct acpi_resource_memory24 { - u8 write_protect; - u16 minimum; - u16 maximum; - u16 alignment; - u16 address_length; -}; - -struct acpi_resource_memory32 { - u8 write_protect; - u32 minimum; - u32 maximum; - u32 alignment; - u32 address_length; -}; - -struct acpi_resource_fixed_memory32 { - u8 write_protect; - u32 address; - u32 address_length; -}; - -struct acpi_memory_attribute { - u8 write_protect; - u8 caching; - u8 range_type; - u8 translation; -}; - -struct acpi_io_attribute { - u8 range_type; - u8 translation; - u8 translation_type; - u8 reserved1; -}; - -union acpi_resource_attribute { - struct acpi_memory_attribute mem; - struct acpi_io_attribute io; - - /* Used for the *word_space macros */ - - u8 type_specific; -}; - -struct acpi_resource_source { - u8 index; - u16 string_length; - char *string_ptr; -}; - -/* Fields common to all address descriptors, 16/32/64 bit */ - -#define ACPI_RESOURCE_ADDRESS_COMMON \ - u8 resource_type; \ - u8 producer_consumer; \ - u8 decode; \ - u8 min_address_fixed; \ - u8 max_address_fixed; \ - union acpi_resource_attribute info; - -struct acpi_resource_address { -ACPI_RESOURCE_ADDRESS_COMMON}; - -struct acpi_resource_address16 { - ACPI_RESOURCE_ADDRESS_COMMON u16 granularity; - u16 minimum; - u16 maximum; - u16 translation_offset; - u16 address_length; - struct acpi_resource_source resource_source; -}; - -struct acpi_resource_address32 { - ACPI_RESOURCE_ADDRESS_COMMON u32 granularity; - u32 minimum; - u32 maximum; - u32 translation_offset; - u32 address_length; - struct acpi_resource_source resource_source; -}; - -struct acpi_resource_address64 { - ACPI_RESOURCE_ADDRESS_COMMON u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; - struct acpi_resource_source resource_source; -}; - -struct acpi_resource_extended_address64 { - ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD; - u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; - u64 type_specific; -}; - -struct acpi_resource_extended_irq { - u8 producer_consumer; - u8 triggering; - u8 polarity; - u8 sharable; - u8 interrupt_count; - struct acpi_resource_source resource_source; - u32 interrupts[1]; -}; - -struct acpi_resource_generic_register { - u8 space_id; - u8 bit_width; - u8 bit_offset; - u8 access_size; - u64 address; -}; - -/* ACPI_RESOURCE_TYPEs */ - -#define ACPI_RESOURCE_TYPE_IRQ 0 -#define ACPI_RESOURCE_TYPE_DMA 1 -#define ACPI_RESOURCE_TYPE_START_DEPENDENT 2 -#define ACPI_RESOURCE_TYPE_END_DEPENDENT 3 -#define ACPI_RESOURCE_TYPE_IO 4 -#define ACPI_RESOURCE_TYPE_FIXED_IO 5 -#define ACPI_RESOURCE_TYPE_VENDOR 6 -#define ACPI_RESOURCE_TYPE_END_TAG 7 -#define ACPI_RESOURCE_TYPE_MEMORY24 8 -#define ACPI_RESOURCE_TYPE_MEMORY32 9 -#define ACPI_RESOURCE_TYPE_FIXED_MEMORY32 10 -#define ACPI_RESOURCE_TYPE_ADDRESS16 11 -#define ACPI_RESOURCE_TYPE_ADDRESS32 12 -#define ACPI_RESOURCE_TYPE_ADDRESS64 13 -#define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 14 /* ACPI 3.0 */ -#define ACPI_RESOURCE_TYPE_EXTENDED_IRQ 15 -#define ACPI_RESOURCE_TYPE_GENERIC_REGISTER 16 -#define ACPI_RESOURCE_TYPE_MAX 16 - -union acpi_resource_data { - struct acpi_resource_irq irq; - struct acpi_resource_dma dma; - struct acpi_resource_start_dependent start_dpf; - struct acpi_resource_io io; - struct acpi_resource_fixed_io fixed_io; - struct acpi_resource_vendor vendor; - struct acpi_resource_vendor_typed vendor_typed; - struct acpi_resource_end_tag end_tag; - struct acpi_resource_memory24 memory24; - struct acpi_resource_memory32 memory32; - struct acpi_resource_fixed_memory32 fixed_memory32; - struct acpi_resource_address16 address16; - struct acpi_resource_address32 address32; - struct acpi_resource_address64 address64; - struct acpi_resource_extended_address64 ext_address64; - struct acpi_resource_extended_irq extended_irq; - struct acpi_resource_generic_register generic_reg; - - /* Common fields */ - - struct acpi_resource_address address; /* Common 16/32/64 address fields */ -}; - -struct acpi_resource { - u32 type; - u32 length; - union acpi_resource_data data; -}; - -/* restore default alignment */ - -#pragma pack() - -#define ACPI_RS_SIZE_NO_DATA 8 /* Id + Length fields */ -#define ACPI_RS_SIZE_MIN (u32) ACPI_ROUND_UP_TO_NATIVE_WORD (12) -#define ACPI_RS_SIZE(type) (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type)) - -#define ACPI_NEXT_RESOURCE(res) (struct acpi_resource *)((u8 *) res + res->length) - -struct acpi_pci_routing_table { - u32 length; - u32 pin; - acpi_integer address; /* here for 64-bit alignment */ - u32 source_index; - char source[4]; /* pad to 64 bits so sizeof() works in all cases */ }; #endif /* __ACTYPES_H__ */ diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h deleted file mode 100644 index d8307b2987e..00000000000 --- a/include/acpi/acutils.h +++ /dev/null @@ -1,585 +0,0 @@ -/****************************************************************************** - * - * Name: acutils.h -- prototypes for the common (subsystem-wide) procedures - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACUTILS_H -#define _ACUTILS_H - -extern const u8 acpi_gbl_resource_aml_sizes[]; - -/* Strings used by the disassembler and debugger resource dump routines */ - -#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER) - -extern const char *acpi_gbl_bm_decode[]; -extern const char *acpi_gbl_config_decode[]; -extern const char *acpi_gbl_consume_decode[]; -extern const char *acpi_gbl_dec_decode[]; -extern const char *acpi_gbl_he_decode[]; -extern const char *acpi_gbl_io_decode[]; -extern const char *acpi_gbl_ll_decode[]; -extern const char *acpi_gbl_max_decode[]; -extern const char *acpi_gbl_mem_decode[]; -extern const char *acpi_gbl_min_decode[]; -extern const char *acpi_gbl_mtp_decode[]; -extern const char *acpi_gbl_rng_decode[]; -extern const char *acpi_gbl_rw_decode[]; -extern const char *acpi_gbl_shr_decode[]; -extern const char *acpi_gbl_siz_decode[]; -extern const char *acpi_gbl_trs_decode[]; -extern const char *acpi_gbl_ttp_decode[]; -extern const char *acpi_gbl_typ_decode[]; -#endif - -/* Types for Resource descriptor entries */ - -#define ACPI_INVALID_RESOURCE 0 -#define ACPI_FIXED_LENGTH 1 -#define ACPI_VARIABLE_LENGTH 2 -#define ACPI_SMALL_VARIABLE_LENGTH 3 - -typedef -acpi_status(*acpi_walk_aml_callback) (u8 * aml, - u32 length, - u32 offset, - u8 resource_index, void **context); - -typedef -acpi_status(*acpi_pkg_callback) (u8 object_type, - union acpi_operand_object * source_object, - union acpi_generic_state * state, - void *context); - -struct acpi_pkg_info { - u8 *free_space; - acpi_size length; - u32 object_space; - u32 num_packages; -}; - -#define REF_INCREMENT (u16) 0 -#define REF_DECREMENT (u16) 1 -#define REF_FORCE_DELETE (u16) 2 - -/* acpi_ut_dump_buffer */ - -#define DB_BYTE_DISPLAY 1 -#define DB_WORD_DISPLAY 2 -#define DB_DWORD_DISPLAY 4 -#define DB_QWORD_DISPLAY 8 - -/* - * utglobal - Global data structures and procedures - */ -acpi_status acpi_ut_init_globals(void); - -#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER) - -char *acpi_ut_get_mutex_name(u32 mutex_id); - -const char *acpi_ut_get_notify_name(u32 notify_value); - -#endif - -char *acpi_ut_get_type_name(acpi_object_type type); - -char *acpi_ut_get_node_name(void *object); - -char *acpi_ut_get_descriptor_name(void *object); - -const char *acpi_ut_get_reference_name(union acpi_operand_object *object); - -char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc); - -char *acpi_ut_get_region_name(u8 space_id); - -char *acpi_ut_get_event_name(u32 event_id); - -char acpi_ut_hex_to_ascii_char(acpi_integer integer, u32 position); - -u8 acpi_ut_valid_object_type(acpi_object_type type); - -/* - * utinit - miscellaneous initialization and shutdown - */ -acpi_status acpi_ut_hardware_initialize(void); - -void acpi_ut_subsystem_shutdown(void); - -/* - * utclib - Local implementations of C library functions - */ -#ifndef ACPI_USE_SYSTEM_CLIBRARY - -acpi_size acpi_ut_strlen(const char *string); - -char *acpi_ut_strcpy(char *dst_string, const char *src_string); - -char *acpi_ut_strncpy(char *dst_string, - const char *src_string, acpi_size count); - -int acpi_ut_memcmp(const char *buffer1, const char *buffer2, acpi_size count); - -int acpi_ut_strncmp(const char *string1, const char *string2, acpi_size count); - -int acpi_ut_strcmp(const char *string1, const char *string2); - -char *acpi_ut_strcat(char *dst_string, const char *src_string); - -char *acpi_ut_strncat(char *dst_string, - const char *src_string, acpi_size count); - -u32 acpi_ut_strtoul(const char *string, char **terminator, u32 base); - -char *acpi_ut_strstr(char *string1, char *string2); - -void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count); - -void *acpi_ut_memset(void *dest, u8 value, acpi_size count); - -int acpi_ut_to_upper(int c); - -int acpi_ut_to_lower(int c); - -extern const u8 _acpi_ctype[]; - -#define _ACPI_XA 0x00 /* extra alphabetic - not supported */ -#define _ACPI_XS 0x40 /* extra space */ -#define _ACPI_BB 0x00 /* BEL, BS, etc. - not supported */ -#define _ACPI_CN 0x20 /* CR, FF, HT, NL, VT */ -#define _ACPI_DI 0x04 /* '0'-'9' */ -#define _ACPI_LO 0x02 /* 'a'-'z' */ -#define _ACPI_PU 0x10 /* punctuation */ -#define _ACPI_SP 0x08 /* space */ -#define _ACPI_UP 0x01 /* 'A'-'Z' */ -#define _ACPI_XD 0x80 /* '0'-'9', 'A'-'F', 'a'-'f' */ - -#define ACPI_IS_DIGIT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_DI)) -#define ACPI_IS_SPACE(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_SP)) -#define ACPI_IS_XDIGIT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_XD)) -#define ACPI_IS_UPPER(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_UP)) -#define ACPI_IS_LOWER(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO)) -#define ACPI_IS_PRINT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU)) -#define ACPI_IS_ALPHA(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP)) - -#endif /* ACPI_USE_SYSTEM_CLIBRARY */ - -/* - * utcopy - Object construction and conversion interfaces - */ -acpi_status -acpi_ut_build_simple_object(union acpi_operand_object *obj, - union acpi_object *user_obj, - u8 * data_space, u32 * buffer_space_used); - -acpi_status -acpi_ut_build_package_object(union acpi_operand_object *obj, - u8 * buffer, u32 * space_used); - -acpi_status -acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj, - struct acpi_buffer *ret_buffer); - -acpi_status -acpi_ut_copy_eobject_to_iobject(union acpi_object *obj, - union acpi_operand_object **internal_obj); - -acpi_status -acpi_ut_copy_isimple_to_isimple(union acpi_operand_object *source_obj, - union acpi_operand_object *dest_obj); - -acpi_status -acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc, - union acpi_operand_object **dest_desc, - struct acpi_walk_state *walk_state); - -/* - * utcreate - Object creation - */ -acpi_status -acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action); - -/* - * utdebug - Debug interfaces - */ -void acpi_ut_init_stack_ptr_trace(void); - -void acpi_ut_track_stack_ptr(void); - -void -acpi_ut_trace(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id); - -void -acpi_ut_trace_ptr(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id, void *pointer); - -void -acpi_ut_trace_u32(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id, u32 integer); - -void -acpi_ut_trace_str(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id, char *string); - -void -acpi_ut_exit(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id); - -void -acpi_ut_status_exit(u32 line_number, - const char *function_name, - const char *module_name, - u32 component_id, acpi_status status); - -void -acpi_ut_value_exit(u32 line_number, - const char *function_name, - const char *module_name, - u32 component_id, acpi_integer value); - -void -acpi_ut_ptr_exit(u32 line_number, - const char *function_name, - const char *module_name, u32 component_id, u8 *ptr); - -void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id); - -void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display); - -void acpi_ut_report_error(char *module_name, u32 line_number); - -void acpi_ut_report_info(char *module_name, u32 line_number); - -void acpi_ut_report_warning(char *module_name, u32 line_number); - -/* Error and message reporting interfaces */ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_debug_print(u32 requested_debug_level, - u32 line_number, - const char *function_name, - const char *module_name, - u32 component_id, - const char *format, ...) ACPI_PRINTF_LIKE(6); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_debug_print_raw(u32 requested_debug_level, - u32 line_number, - const char *function_name, - const char *module_name, - u32 component_id, - const char *format, ...) ACPI_PRINTF_LIKE(6); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_error(const char *module_name, - u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_exception(const char *module_name, - u32 line_number, - acpi_status status, - const char *format, ...) ACPI_PRINTF_LIKE(4); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_warning(const char *module_name, - u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_info(const char *module_name, - u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); - -/* - * utdelete - Object deletion and reference counts - */ -void acpi_ut_add_reference(union acpi_operand_object *object); - -void acpi_ut_remove_reference(union acpi_operand_object *object); - -void acpi_ut_delete_internal_package_object(union acpi_operand_object *object); - -void acpi_ut_delete_internal_simple_object(union acpi_operand_object *object); - -void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list); - -/* - * uteval - object evaluation - */ -acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state); - -acpi_status -acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, - char *path, - u32 expected_return_btypes, - union acpi_operand_object **return_desc); - -acpi_status -acpi_ut_evaluate_numeric_object(char *object_name, - struct acpi_namespace_node *device_node, - acpi_integer * address); - -acpi_status -acpi_ut_execute_HID(struct acpi_namespace_node *device_node, - struct acpica_device_id *hid); - -acpi_status -acpi_ut_execute_CID(struct acpi_namespace_node *device_node, - struct acpi_compatible_id_list **return_cid_list); - -acpi_status -acpi_ut_execute_STA(struct acpi_namespace_node *device_node, - u32 * status_flags); - -acpi_status -acpi_ut_execute_UID(struct acpi_namespace_node *device_node, - struct acpica_device_id *uid); - -acpi_status -acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest); - -/* - * utobject - internal object create/delete/cache routines - */ -union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char - *module_name, - u32 line_number, - u32 component_id, - acpi_object_type - type); - -void *acpi_ut_allocate_object_desc_dbg(const char *module_name, - u32 line_number, u32 component_id); - -#define acpi_ut_create_internal_object(t) acpi_ut_create_internal_object_dbg (_acpi_module_name,__LINE__,_COMPONENT,t) -#define acpi_ut_allocate_object_desc() acpi_ut_allocate_object_desc_dbg (_acpi_module_name,__LINE__,_COMPONENT) - -void acpi_ut_delete_object_desc(union acpi_operand_object *object); - -u8 acpi_ut_valid_internal_object(void *object); - -union acpi_operand_object *acpi_ut_create_package_object(u32 count); - -union acpi_operand_object *acpi_ut_create_buffer_object(acpi_size buffer_size); - -union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size); - -acpi_status -acpi_ut_get_object_size(union acpi_operand_object *obj, acpi_size * obj_length); - -/* - * utstate - Generic state creation/cache routines - */ -void -acpi_ut_push_generic_state(union acpi_generic_state **list_head, - union acpi_generic_state *state); - -union acpi_generic_state *acpi_ut_pop_generic_state(union acpi_generic_state - **list_head); - -union acpi_generic_state *acpi_ut_create_generic_state(void); - -struct acpi_thread_state *acpi_ut_create_thread_state(void); - -union acpi_generic_state *acpi_ut_create_update_state(union acpi_operand_object - *object, u16 action); - -union acpi_generic_state *acpi_ut_create_pkg_state(void *internal_object, - void *external_object, - u16 index); - -acpi_status -acpi_ut_create_update_state_and_push(union acpi_operand_object *object, - u16 action, - union acpi_generic_state **state_list); - -#ifdef ACPI_FUTURE_USAGE -acpi_status -acpi_ut_create_pkg_state_and_push(void *internal_object, - void *external_object, - u16 index, - union acpi_generic_state **state_list); -#endif /* ACPI_FUTURE_USAGE */ - -union acpi_generic_state *acpi_ut_create_control_state(void); - -void acpi_ut_delete_generic_state(union acpi_generic_state *state); - -/* - * utmath - */ -acpi_status -acpi_ut_divide(acpi_integer in_dividend, - acpi_integer in_divisor, - acpi_integer * out_quotient, acpi_integer * out_remainder); - -acpi_status -acpi_ut_short_divide(acpi_integer in_dividend, - u32 divisor, - acpi_integer * out_quotient, u32 * out_remainder); - -/* - * utmisc - */ -const char *acpi_ut_validate_exception(acpi_status status); - -u8 acpi_ut_is_aml_table(struct acpi_table_header *table); - -acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id); - -void acpi_ut_release_owner_id(acpi_owner_id * owner_id); - -acpi_status -acpi_ut_walk_package_tree(union acpi_operand_object *source_object, - void *target_object, - acpi_pkg_callback walk_callback, void *context); - -void acpi_ut_strupr(char *src_string); - -void acpi_ut_print_string(char *string, u8 max_length); - -u8 acpi_ut_valid_acpi_name(u32 name); - -acpi_name acpi_ut_repair_name(char *name); - -u8 acpi_ut_valid_acpi_char(char character, u32 position); - -acpi_status -acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer); - -/* Values for Base above (16=Hex, 10=Decimal) */ - -#define ACPI_ANY_BASE 0 - -u32 acpi_ut_dword_byte_swap(u32 value); - -void acpi_ut_set_integer_width(u8 revision); - -#ifdef ACPI_DEBUG_OUTPUT -void -acpi_ut_display_init_pathname(u8 type, - struct acpi_namespace_node *obj_handle, - char *path); -#endif - -/* - * utresrc - */ -acpi_status -acpi_ut_walk_aml_resources(u8 * aml, - acpi_size aml_length, - acpi_walk_aml_callback user_function, - void **context); - -acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index); - -u32 acpi_ut_get_descriptor_length(void *aml); - -u16 acpi_ut_get_resource_length(void *aml); - -u8 acpi_ut_get_resource_header_length(void *aml); - -u8 acpi_ut_get_resource_type(void *aml); - -acpi_status -acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, - u8 ** end_tag); - -/* - * utmutex - mutex support - */ -acpi_status acpi_ut_mutex_initialize(void); - -void acpi_ut_mutex_terminate(void); - -acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id); - -acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id); - -/* - * utalloc - memory allocation and object caching - */ -acpi_status acpi_ut_create_caches(void); - -acpi_status acpi_ut_delete_caches(void); - -acpi_status acpi_ut_validate_buffer(struct acpi_buffer *buffer); - -acpi_status -acpi_ut_initialize_buffer(struct acpi_buffer *buffer, - acpi_size required_length); - -void *acpi_ut_allocate(acpi_size size, - u32 component, const char *module, u32 line); - -void *acpi_ut_allocate_zeroed(acpi_size size, - u32 component, const char *module, u32 line); - -#ifdef ACPI_DBG_TRACK_ALLOCATIONS -void *acpi_ut_allocate_and_track(acpi_size size, - u32 component, const char *module, u32 line); - -void *acpi_ut_allocate_zeroed_and_track(acpi_size size, - u32 component, - const char *module, u32 line); - -void -acpi_ut_free_and_track(void *address, - u32 component, const char *module, u32 line); - -#ifdef ACPI_FUTURE_USAGE -void acpi_ut_dump_allocation_info(void); -#endif /* ACPI_FUTURE_USAGE */ - -void acpi_ut_dump_allocations(u32 component, const char *module); - -acpi_status -acpi_ut_create_list(char *list_name, - u16 object_size, struct acpi_memory_list **return_cache); - -#endif - -#endif /* _ACUTILS_H */ diff --git a/include/acpi/amlcode.h b/include/acpi/amlcode.h deleted file mode 100644 index ff851c5df69..00000000000 --- a/include/acpi/amlcode.h +++ /dev/null @@ -1,494 +0,0 @@ -/****************************************************************************** - * - * Name: amlcode.h - Definitions for AML, as included in "definition blocks" - * Declarations and definitions contained herein are derived - * directly from the ACPI specification. - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __AMLCODE_H__ -#define __AMLCODE_H__ - -/* primary opcodes */ - -#define AML_NULL_CHAR (u16) 0x00 - -#define AML_ZERO_OP (u16) 0x00 -#define AML_ONE_OP (u16) 0x01 -#define AML_UNASSIGNED (u16) 0x02 -#define AML_ALIAS_OP (u16) 0x06 -#define AML_NAME_OP (u16) 0x08 -#define AML_BYTE_OP (u16) 0x0a -#define AML_WORD_OP (u16) 0x0b -#define AML_DWORD_OP (u16) 0x0c -#define AML_STRING_OP (u16) 0x0d -#define AML_QWORD_OP (u16) 0x0e /* ACPI 2.0 */ -#define AML_SCOPE_OP (u16) 0x10 -#define AML_BUFFER_OP (u16) 0x11 -#define AML_PACKAGE_OP (u16) 0x12 -#define AML_VAR_PACKAGE_OP (u16) 0x13 /* ACPI 2.0 */ -#define AML_METHOD_OP (u16) 0x14 -#define AML_DUAL_NAME_PREFIX (u16) 0x2e -#define AML_MULTI_NAME_PREFIX_OP (u16) 0x2f -#define AML_NAME_CHAR_SUBSEQ (u16) 0x30 -#define AML_NAME_CHAR_FIRST (u16) 0x41 -#define AML_EXTENDED_OP_PREFIX (u16) 0x5b -#define AML_ROOT_PREFIX (u16) 0x5c -#define AML_PARENT_PREFIX (u16) 0x5e -#define AML_LOCAL_OP (u16) 0x60 -#define AML_LOCAL0 (u16) 0x60 -#define AML_LOCAL1 (u16) 0x61 -#define AML_LOCAL2 (u16) 0x62 -#define AML_LOCAL3 (u16) 0x63 -#define AML_LOCAL4 (u16) 0x64 -#define AML_LOCAL5 (u16) 0x65 -#define AML_LOCAL6 (u16) 0x66 -#define AML_LOCAL7 (u16) 0x67 -#define AML_ARG_OP (u16) 0x68 -#define AML_ARG0 (u16) 0x68 -#define AML_ARG1 (u16) 0x69 -#define AML_ARG2 (u16) 0x6a -#define AML_ARG3 (u16) 0x6b -#define AML_ARG4 (u16) 0x6c -#define AML_ARG5 (u16) 0x6d -#define AML_ARG6 (u16) 0x6e -#define AML_STORE_OP (u16) 0x70 -#define AML_REF_OF_OP (u16) 0x71 -#define AML_ADD_OP (u16) 0x72 -#define AML_CONCAT_OP (u16) 0x73 -#define AML_SUBTRACT_OP (u16) 0x74 -#define AML_INCREMENT_OP (u16) 0x75 -#define AML_DECREMENT_OP (u16) 0x76 -#define AML_MULTIPLY_OP (u16) 0x77 -#define AML_DIVIDE_OP (u16) 0x78 -#define AML_SHIFT_LEFT_OP (u16) 0x79 -#define AML_SHIFT_RIGHT_OP (u16) 0x7a -#define AML_BIT_AND_OP (u16) 0x7b -#define AML_BIT_NAND_OP (u16) 0x7c -#define AML_BIT_OR_OP (u16) 0x7d -#define AML_BIT_NOR_OP (u16) 0x7e -#define AML_BIT_XOR_OP (u16) 0x7f -#define AML_BIT_NOT_OP (u16) 0x80 -#define AML_FIND_SET_LEFT_BIT_OP (u16) 0x81 -#define AML_FIND_SET_RIGHT_BIT_OP (u16) 0x82 -#define AML_DEREF_OF_OP (u16) 0x83 -#define AML_CONCAT_RES_OP (u16) 0x84 /* ACPI 2.0 */ -#define AML_MOD_OP (u16) 0x85 /* ACPI 2.0 */ -#define AML_NOTIFY_OP (u16) 0x86 -#define AML_SIZE_OF_OP (u16) 0x87 -#define AML_INDEX_OP (u16) 0x88 -#define AML_MATCH_OP (u16) 0x89 -#define AML_CREATE_DWORD_FIELD_OP (u16) 0x8a -#define AML_CREATE_WORD_FIELD_OP (u16) 0x8b -#define AML_CREATE_BYTE_FIELD_OP (u16) 0x8c -#define AML_CREATE_BIT_FIELD_OP (u16) 0x8d -#define AML_TYPE_OP (u16) 0x8e -#define AML_CREATE_QWORD_FIELD_OP (u16) 0x8f /* ACPI 2.0 */ -#define AML_LAND_OP (u16) 0x90 -#define AML_LOR_OP (u16) 0x91 -#define AML_LNOT_OP (u16) 0x92 -#define AML_LEQUAL_OP (u16) 0x93 -#define AML_LGREATER_OP (u16) 0x94 -#define AML_LLESS_OP (u16) 0x95 -#define AML_TO_BUFFER_OP (u16) 0x96 /* ACPI 2.0 */ -#define AML_TO_DECSTRING_OP (u16) 0x97 /* ACPI 2.0 */ -#define AML_TO_HEXSTRING_OP (u16) 0x98 /* ACPI 2.0 */ -#define AML_TO_INTEGER_OP (u16) 0x99 /* ACPI 2.0 */ -#define AML_TO_STRING_OP (u16) 0x9c /* ACPI 2.0 */ -#define AML_COPY_OP (u16) 0x9d /* ACPI 2.0 */ -#define AML_MID_OP (u16) 0x9e /* ACPI 2.0 */ -#define AML_CONTINUE_OP (u16) 0x9f /* ACPI 2.0 */ -#define AML_IF_OP (u16) 0xa0 -#define AML_ELSE_OP (u16) 0xa1 -#define AML_WHILE_OP (u16) 0xa2 -#define AML_NOOP_OP (u16) 0xa3 -#define AML_RETURN_OP (u16) 0xa4 -#define AML_BREAK_OP (u16) 0xa5 -#define AML_BREAK_POINT_OP (u16) 0xcc -#define AML_ONES_OP (u16) 0xff - -/* prefixed opcodes */ - -#define AML_EXTENDED_OPCODE (u16) 0x5b00 /* prefix for 2-byte opcodes */ - -#define AML_MUTEX_OP (u16) 0x5b01 -#define AML_EVENT_OP (u16) 0x5b02 -#define AML_SHIFT_RIGHT_BIT_OP (u16) 0x5b10 -#define AML_SHIFT_LEFT_BIT_OP (u16) 0x5b11 -#define AML_COND_REF_OF_OP (u16) 0x5b12 -#define AML_CREATE_FIELD_OP (u16) 0x5b13 -#define AML_LOAD_TABLE_OP (u16) 0x5b1f /* ACPI 2.0 */ -#define AML_LOAD_OP (u16) 0x5b20 -#define AML_STALL_OP (u16) 0x5b21 -#define AML_SLEEP_OP (u16) 0x5b22 -#define AML_ACQUIRE_OP (u16) 0x5b23 -#define AML_SIGNAL_OP (u16) 0x5b24 -#define AML_WAIT_OP (u16) 0x5b25 -#define AML_RESET_OP (u16) 0x5b26 -#define AML_RELEASE_OP (u16) 0x5b27 -#define AML_FROM_BCD_OP (u16) 0x5b28 -#define AML_TO_BCD_OP (u16) 0x5b29 -#define AML_UNLOAD_OP (u16) 0x5b2a -#define AML_REVISION_OP (u16) 0x5b30 -#define AML_DEBUG_OP (u16) 0x5b31 -#define AML_FATAL_OP (u16) 0x5b32 -#define AML_TIMER_OP (u16) 0x5b33 /* ACPI 3.0 */ -#define AML_REGION_OP (u16) 0x5b80 -#define AML_FIELD_OP (u16) 0x5b81 -#define AML_DEVICE_OP (u16) 0x5b82 -#define AML_PROCESSOR_OP (u16) 0x5b83 -#define AML_POWER_RES_OP (u16) 0x5b84 -#define AML_THERMAL_ZONE_OP (u16) 0x5b85 -#define AML_INDEX_FIELD_OP (u16) 0x5b86 -#define AML_BANK_FIELD_OP (u16) 0x5b87 -#define AML_DATA_REGION_OP (u16) 0x5b88 /* ACPI 2.0 */ - -/* - * Combination opcodes (actually two one-byte opcodes) - * Used by the disassembler and i_aSL compiler - */ -#define AML_LGREATEREQUAL_OP (u16) 0x9295 -#define AML_LLESSEQUAL_OP (u16) 0x9294 -#define AML_LNOTEQUAL_OP (u16) 0x9293 - -/* - * Internal opcodes - * Use only "Unknown" AML opcodes, don't attempt to use - * any valid ACPI ASCII values (A-Z, 0-9, '-') - */ -#define AML_INT_NAMEPATH_OP (u16) 0x002d -#define AML_INT_NAMEDFIELD_OP (u16) 0x0030 -#define AML_INT_RESERVEDFIELD_OP (u16) 0x0031 -#define AML_INT_ACCESSFIELD_OP (u16) 0x0032 -#define AML_INT_BYTELIST_OP (u16) 0x0033 -#define AML_INT_STATICSTRING_OP (u16) 0x0034 -#define AML_INT_METHODCALL_OP (u16) 0x0035 -#define AML_INT_RETURN_VALUE_OP (u16) 0x0036 -#define AML_INT_EVAL_SUBTREE_OP (u16) 0x0037 - -#define ARG_NONE 0x0 - -/* - * Argument types for the AML Parser - * Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments. - * There can be up to 31 unique argument types - * Zero is reserved as end-of-list indicator - */ -#define ARGP_BYTEDATA 0x01 -#define ARGP_BYTELIST 0x02 -#define ARGP_CHARLIST 0x03 -#define ARGP_DATAOBJ 0x04 -#define ARGP_DATAOBJLIST 0x05 -#define ARGP_DWORDDATA 0x06 -#define ARGP_FIELDLIST 0x07 -#define ARGP_NAME 0x08 -#define ARGP_NAMESTRING 0x09 -#define ARGP_OBJLIST 0x0A -#define ARGP_PKGLENGTH 0x0B -#define ARGP_SUPERNAME 0x0C -#define ARGP_TARGET 0x0D -#define ARGP_TERMARG 0x0E -#define ARGP_TERMLIST 0x0F -#define ARGP_WORDDATA 0x10 -#define ARGP_QWORDDATA 0x11 -#define ARGP_SIMPLENAME 0x12 - -/* - * Resolved argument types for the AML Interpreter - * Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments. - * There can be up to 31 unique argument types (0 is end-of-arg-list indicator) - * - * Note1: These values are completely independent from the ACPI_TYPEs - * i.e., ARGI_INTEGER != ACPI_TYPE_INTEGER - * - * Note2: If and when 5 bits becomes insufficient, it would probably be best - * to convert to a 6-byte array of argument types, allowing 8 bits per argument. - */ - -/* Single, simple types */ - -#define ARGI_ANYTYPE 0x01 /* Don't care */ -#define ARGI_PACKAGE 0x02 -#define ARGI_EVENT 0x03 -#define ARGI_MUTEX 0x04 -#define ARGI_DDBHANDLE 0x05 - -/* Interchangeable types (via implicit conversion) */ - -#define ARGI_INTEGER 0x06 -#define ARGI_STRING 0x07 -#define ARGI_BUFFER 0x08 -#define ARGI_BUFFER_OR_STRING 0x09 /* Used by MID op only */ -#define ARGI_COMPUTEDATA 0x0A /* Buffer, String, or Integer */ - -/* Reference objects */ - -#define ARGI_INTEGER_REF 0x0B -#define ARGI_OBJECT_REF 0x0C -#define ARGI_DEVICE_REF 0x0D -#define ARGI_REFERENCE 0x0E -#define ARGI_TARGETREF 0x0F /* Target, subject to implicit conversion */ -#define ARGI_FIXED_TARGET 0x10 /* Target, no implicit conversion */ -#define ARGI_SIMPLE_TARGET 0x11 /* Name, Local, Arg -- no implicit conversion */ - -/* Multiple/complex types */ - -#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */ -#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */ -#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */ -#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */ -#define ARGI_DATAREFOBJ 0x16 - -/* Note: types above can expand to 0x1F maximum */ - -#define ARGI_INVALID_OPCODE 0xFFFFFFFF - -/* - * hash offsets - */ -#define AML_EXTOP_HASH_OFFSET 22 -#define AML_LNOT_HASH_OFFSET 19 - -/* - * opcode groups and types - */ -#define OPGRP_NAMED 0x01 -#define OPGRP_FIELD 0x02 -#define OPGRP_BYTELIST 0x04 - -/* - * Opcode information - */ - -/* Opcode flags */ - -#define AML_LOGICAL 0x0001 -#define AML_LOGICAL_NUMERIC 0x0002 -#define AML_MATH 0x0004 -#define AML_CREATE 0x0008 -#define AML_FIELD 0x0010 -#define AML_DEFER 0x0020 -#define AML_NAMED 0x0040 -#define AML_NSNODE 0x0080 -#define AML_NSOPCODE 0x0100 -#define AML_NSOBJECT 0x0200 -#define AML_HAS_RETVAL 0x0400 -#define AML_HAS_TARGET 0x0800 -#define AML_HAS_ARGS 0x1000 -#define AML_CONSTANT 0x2000 -#define AML_NO_OPERAND_RESOLVE 0x4000 - -/* Convenient flag groupings */ - -#define AML_FLAGS_EXEC_0A_0T_1R AML_HAS_RETVAL -#define AML_FLAGS_EXEC_1A_0T_0R AML_HAS_ARGS /* Monadic1 */ -#define AML_FLAGS_EXEC_1A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL /* Monadic2 */ -#define AML_FLAGS_EXEC_1A_1T_0R AML_HAS_ARGS | AML_HAS_TARGET -#define AML_FLAGS_EXEC_1A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* monadic2_r */ -#define AML_FLAGS_EXEC_2A_0T_0R AML_HAS_ARGS /* Dyadic1 */ -#define AML_FLAGS_EXEC_2A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL /* Dyadic2 */ -#define AML_FLAGS_EXEC_2A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* dyadic2_r */ -#define AML_FLAGS_EXEC_2A_2T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL -#define AML_FLAGS_EXEC_3A_0T_0R AML_HAS_ARGS -#define AML_FLAGS_EXEC_3A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL -#define AML_FLAGS_EXEC_6A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL - -/* - * The opcode Type is used in a dispatch table, do not change - * without updating the table. - */ -#define AML_TYPE_EXEC_0A_0T_1R 0x00 -#define AML_TYPE_EXEC_1A_0T_0R 0x01 /* Monadic1 */ -#define AML_TYPE_EXEC_1A_0T_1R 0x02 /* Monadic2 */ -#define AML_TYPE_EXEC_1A_1T_0R 0x03 -#define AML_TYPE_EXEC_1A_1T_1R 0x04 /* monadic2_r */ -#define AML_TYPE_EXEC_2A_0T_0R 0x05 /* Dyadic1 */ -#define AML_TYPE_EXEC_2A_0T_1R 0x06 /* Dyadic2 */ -#define AML_TYPE_EXEC_2A_1T_1R 0x07 /* dyadic2_r */ -#define AML_TYPE_EXEC_2A_2T_1R 0x08 -#define AML_TYPE_EXEC_3A_0T_0R 0x09 -#define AML_TYPE_EXEC_3A_1T_1R 0x0A -#define AML_TYPE_EXEC_6A_0T_1R 0x0B -/* End of types used in dispatch table */ - -#define AML_TYPE_LITERAL 0x0B -#define AML_TYPE_CONSTANT 0x0C -#define AML_TYPE_METHOD_ARGUMENT 0x0D -#define AML_TYPE_LOCAL_VARIABLE 0x0E -#define AML_TYPE_DATA_TERM 0x0F - -/* Generic for an op that returns a value */ - -#define AML_TYPE_METHOD_CALL 0x10 - -/* Misc */ - -#define AML_TYPE_CREATE_FIELD 0x11 -#define AML_TYPE_CREATE_OBJECT 0x12 -#define AML_TYPE_CONTROL 0x13 -#define AML_TYPE_NAMED_NO_OBJ 0x14 -#define AML_TYPE_NAMED_FIELD 0x15 -#define AML_TYPE_NAMED_SIMPLE 0x16 -#define AML_TYPE_NAMED_COMPLEX 0x17 -#define AML_TYPE_RETURN 0x18 - -#define AML_TYPE_UNDEFINED 0x19 -#define AML_TYPE_BOGUS 0x1A - -/* AML Package Length encodings */ - -#define ACPI_AML_PACKAGE_TYPE1 0x40 -#define ACPI_AML_PACKAGE_TYPE2 0x4000 -#define ACPI_AML_PACKAGE_TYPE3 0x400000 -#define ACPI_AML_PACKAGE_TYPE4 0x40000000 - -/* - * Opcode classes - */ -#define AML_CLASS_EXECUTE 0x00 -#define AML_CLASS_CREATE 0x01 -#define AML_CLASS_ARGUMENT 0x02 -#define AML_CLASS_NAMED_OBJECT 0x03 -#define AML_CLASS_CONTROL 0x04 -#define AML_CLASS_ASCII 0x05 -#define AML_CLASS_PREFIX 0x06 -#define AML_CLASS_INTERNAL 0x07 -#define AML_CLASS_RETURN_VALUE 0x08 -#define AML_CLASS_METHOD_CALL 0x09 -#define AML_CLASS_UNKNOWN 0x0A - -/* Predefined Operation Region space_iDs */ - -typedef enum { - REGION_MEMORY = 0, - REGION_IO, - REGION_PCI_CONFIG, - REGION_EC, - REGION_SMBUS, - REGION_CMOS, - REGION_PCI_BAR, - REGION_DATA_TABLE, /* Internal use only */ - REGION_FIXED_HW = 0x7F -} AML_REGION_TYPES; - -/* Comparison operation codes for match_op operator */ - -typedef enum { - MATCH_MTR = 0, - MATCH_MEQ = 1, - MATCH_MLE = 2, - MATCH_MLT = 3, - MATCH_MGE = 4, - MATCH_MGT = 5 -} AML_MATCH_OPERATOR; - -#define MAX_MATCH_OPERATOR 5 - -/* - * field_flags - * - * This byte is extracted from the AML and includes three separate - * pieces of information about the field: - * 1) The field access type - * 2) The field update rule - * 3) The lock rule for the field - * - * Bits 00 - 03 : access_type (any_acc, byte_acc, etc.) - * 04 : lock_rule (1 == Lock) - * 05 - 06 : update_rule - */ -#define AML_FIELD_ACCESS_TYPE_MASK 0x0F -#define AML_FIELD_LOCK_RULE_MASK 0x10 -#define AML_FIELD_UPDATE_RULE_MASK 0x60 - -/* 1) Field Access Types */ - -typedef enum { - AML_FIELD_ACCESS_ANY = 0x00, - AML_FIELD_ACCESS_BYTE = 0x01, - AML_FIELD_ACCESS_WORD = 0x02, - AML_FIELD_ACCESS_DWORD = 0x03, - AML_FIELD_ACCESS_QWORD = 0x04, /* ACPI 2.0 */ - AML_FIELD_ACCESS_BUFFER = 0x05 /* ACPI 2.0 */ -} AML_ACCESS_TYPE; - -/* 2) Field Lock Rules */ - -typedef enum { - AML_FIELD_LOCK_NEVER = 0x00, - AML_FIELD_LOCK_ALWAYS = 0x10 -} AML_LOCK_RULE; - -/* 3) Field Update Rules */ - -typedef enum { - AML_FIELD_UPDATE_PRESERVE = 0x00, - AML_FIELD_UPDATE_WRITE_AS_ONES = 0x20, - AML_FIELD_UPDATE_WRITE_AS_ZEROS = 0x40 -} AML_UPDATE_RULE; - -/* - * Field Access Attributes. - * This byte is extracted from the AML via the - * access_as keyword - */ -typedef enum { - AML_FIELD_ATTRIB_SMB_QUICK = 0x02, - AML_FIELD_ATTRIB_SMB_SEND_RCV = 0x04, - AML_FIELD_ATTRIB_SMB_BYTE = 0x06, - AML_FIELD_ATTRIB_SMB_WORD = 0x08, - AML_FIELD_ATTRIB_SMB_BLOCK = 0x0A, - AML_FIELD_ATTRIB_SMB_WORD_CALL = 0x0C, - AML_FIELD_ATTRIB_SMB_BLOCK_CALL = 0x0D -} AML_ACCESS_ATTRIBUTE; - -/* Bit fields in method_flags byte */ - -#define AML_METHOD_ARG_COUNT 0x07 -#define AML_METHOD_SERIALIZED 0x08 -#define AML_METHOD_SYNCH_LEVEL 0xF0 - -/* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */ - -#define AML_METHOD_INTERNAL_ONLY 0x01 -#define AML_METHOD_RESERVED1 0x02 -#define AML_METHOD_RESERVED2 0x04 - -#endif /* __AMLCODE_H__ */ diff --git a/include/acpi/amlresrc.h b/include/acpi/amlresrc.h deleted file mode 100644 index 7b070e42b7c..00000000000 --- a/include/acpi/amlresrc.h +++ /dev/null @@ -1,311 +0,0 @@ - -/****************************************************************************** - * - * Module Name: amlresrc.h - AML resource descriptors - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -/* acpisrc:struct_defs -- for acpisrc conversion */ - -#ifndef __AMLRESRC_H -#define __AMLRESRC_H - -/* - * Resource descriptor tags, as defined in the ACPI specification. - * Used to symbolically reference fields within a descriptor. - */ -#define ACPI_RESTAG_ADDRESS "_ADR" -#define ACPI_RESTAG_ALIGNMENT "_ALN" -#define ACPI_RESTAG_ADDRESSSPACE "_ASI" -#define ACPI_RESTAG_ACCESSSIZE "_ASZ" -#define ACPI_RESTAG_TYPESPECIFICATTRIBUTES "_ATT" -#define ACPI_RESTAG_BASEADDRESS "_BAS" -#define ACPI_RESTAG_BUSMASTER "_BM_" /* Master(1), Slave(0) */ -#define ACPI_RESTAG_DECODE "_DEC" -#define ACPI_RESTAG_DMA "_DMA" -#define ACPI_RESTAG_DMATYPE "_TYP" /* Compatible(0), A(1), B(2), F(3) */ -#define ACPI_RESTAG_GRANULARITY "_GRA" -#define ACPI_RESTAG_INTERRUPT "_INT" -#define ACPI_RESTAG_INTERRUPTLEVEL "_LL_" /* active_lo(1), active_hi(0) */ -#define ACPI_RESTAG_INTERRUPTSHARE "_SHR" /* Shareable(1), no_share(0) */ -#define ACPI_RESTAG_INTERRUPTTYPE "_HE_" /* Edge(1), Level(0) */ -#define ACPI_RESTAG_LENGTH "_LEN" -#define ACPI_RESTAG_MEMATTRIBUTES "_MTP" /* Memory(0), Reserved(1), ACPI(2), NVS(3) */ -#define ACPI_RESTAG_MEMTYPE "_MEM" /* non_cache(0), Cacheable(1) Cache+combine(2), Cache+prefetch(3) */ -#define ACPI_RESTAG_MAXADDR "_MAX" -#define ACPI_RESTAG_MINADDR "_MIN" -#define ACPI_RESTAG_MAXTYPE "_MAF" -#define ACPI_RESTAG_MINTYPE "_MIF" -#define ACPI_RESTAG_REGISTERBITOFFSET "_RBO" -#define ACPI_RESTAG_REGISTERBITWIDTH "_RBW" -#define ACPI_RESTAG_RANGETYPE "_RNG" -#define ACPI_RESTAG_READWRITETYPE "_RW_" /* read_only(0), Writeable (1) */ -#define ACPI_RESTAG_TRANSLATION "_TRA" -#define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */ -#define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */ -#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */ - -/* Default sizes for "small" resource descriptors */ - -#define ASL_RDESC_IRQ_SIZE 0x02 -#define ASL_RDESC_DMA_SIZE 0x02 -#define ASL_RDESC_ST_DEPEND_SIZE 0x00 -#define ASL_RDESC_END_DEPEND_SIZE 0x00 -#define ASL_RDESC_IO_SIZE 0x07 -#define ASL_RDESC_FIXED_IO_SIZE 0x03 -#define ASL_RDESC_END_TAG_SIZE 0x01 - -struct asl_resource_node { - u32 buffer_length; - void *buffer; - struct asl_resource_node *next; -}; - -/* Macros used to generate AML resource length fields */ - -#define ACPI_AML_SIZE_LARGE(r) (sizeof (r) - sizeof (struct aml_resource_large_header)) -#define ACPI_AML_SIZE_SMALL(r) (sizeof (r) - sizeof (struct aml_resource_small_header)) - -/* - * Resource descriptors defined in the ACPI specification. - * - * Packing/alignment must be BYTE because these descriptors - * are used to overlay the raw AML byte stream. - */ -#pragma pack(1) - -/* - * SMALL descriptors - */ -#define AML_RESOURCE_SMALL_HEADER_COMMON \ - u8 descriptor_type; - -struct aml_resource_small_header { -AML_RESOURCE_SMALL_HEADER_COMMON}; - -struct aml_resource_irq { - AML_RESOURCE_SMALL_HEADER_COMMON u16 irq_mask; - u8 flags; -}; - -struct aml_resource_irq_noflags { - AML_RESOURCE_SMALL_HEADER_COMMON u16 irq_mask; -}; - -struct aml_resource_dma { - AML_RESOURCE_SMALL_HEADER_COMMON u8 dma_channel_mask; - u8 flags; -}; - -struct aml_resource_start_dependent { - AML_RESOURCE_SMALL_HEADER_COMMON u8 flags; -}; - -struct aml_resource_start_dependent_noprio { -AML_RESOURCE_SMALL_HEADER_COMMON}; - -struct aml_resource_end_dependent { -AML_RESOURCE_SMALL_HEADER_COMMON}; - -struct aml_resource_io { - AML_RESOURCE_SMALL_HEADER_COMMON u8 flags; - u16 minimum; - u16 maximum; - u8 alignment; - u8 address_length; -}; - -struct aml_resource_fixed_io { - AML_RESOURCE_SMALL_HEADER_COMMON u16 address; - u8 address_length; -}; - -struct aml_resource_vendor_small { -AML_RESOURCE_SMALL_HEADER_COMMON}; - -struct aml_resource_end_tag { - AML_RESOURCE_SMALL_HEADER_COMMON u8 checksum; -}; - -/* - * LARGE descriptors - */ -#define AML_RESOURCE_LARGE_HEADER_COMMON \ - u8 descriptor_type;\ - u16 resource_length; - -struct aml_resource_large_header { -AML_RESOURCE_LARGE_HEADER_COMMON}; - -struct aml_resource_memory24 { - AML_RESOURCE_LARGE_HEADER_COMMON u8 flags; - u16 minimum; - u16 maximum; - u16 alignment; - u16 address_length; -}; - -struct aml_resource_vendor_large { -AML_RESOURCE_LARGE_HEADER_COMMON}; - -struct aml_resource_memory32 { - AML_RESOURCE_LARGE_HEADER_COMMON u8 flags; - u32 minimum; - u32 maximum; - u32 alignment; - u32 address_length; -}; - -struct aml_resource_fixed_memory32 { - AML_RESOURCE_LARGE_HEADER_COMMON u8 flags; - u32 address; - u32 address_length; -}; - -#define AML_RESOURCE_ADDRESS_COMMON \ - u8 resource_type; \ - u8 flags; \ - u8 specific_flags; - -struct aml_resource_address { -AML_RESOURCE_LARGE_HEADER_COMMON AML_RESOURCE_ADDRESS_COMMON}; - -struct aml_resource_extended_address64 { - AML_RESOURCE_LARGE_HEADER_COMMON - AML_RESOURCE_ADDRESS_COMMON u8 revision_iD; - u8 reserved; - u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; - u64 type_specific; -}; - -#define AML_RESOURCE_EXTENDED_ADDRESS_REVISION 1 /* ACPI 3.0 */ - -struct aml_resource_address64 { - AML_RESOURCE_LARGE_HEADER_COMMON - AML_RESOURCE_ADDRESS_COMMON u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; -}; - -struct aml_resource_address32 { - AML_RESOURCE_LARGE_HEADER_COMMON - AML_RESOURCE_ADDRESS_COMMON u32 granularity; - u32 minimum; - u32 maximum; - u32 translation_offset; - u32 address_length; -}; - -struct aml_resource_address16 { - AML_RESOURCE_LARGE_HEADER_COMMON - AML_RESOURCE_ADDRESS_COMMON u16 granularity; - u16 minimum; - u16 maximum; - u16 translation_offset; - u16 address_length; -}; - -struct aml_resource_extended_irq { - AML_RESOURCE_LARGE_HEADER_COMMON u8 flags; - u8 interrupt_count; - u32 interrupts[1]; - /* res_source_index, res_source optional fields follow */ -}; - -struct aml_resource_generic_register { - AML_RESOURCE_LARGE_HEADER_COMMON u8 address_space_id; - u8 bit_width; - u8 bit_offset; - u8 access_size; /* ACPI 3.0, was previously Reserved */ - u64 address; -}; - -/* restore default alignment */ - -#pragma pack() - -/* Union of all resource descriptors, so we can allocate the worst case */ - -union aml_resource { - /* Descriptor headers */ - - u8 descriptor_type; - struct aml_resource_small_header small_header; - struct aml_resource_large_header large_header; - - /* Small resource descriptors */ - - struct aml_resource_irq irq; - struct aml_resource_dma dma; - struct aml_resource_start_dependent start_dpf; - struct aml_resource_end_dependent end_dpf; - struct aml_resource_io io; - struct aml_resource_fixed_io fixed_io; - struct aml_resource_vendor_small vendor_small; - struct aml_resource_end_tag end_tag; - - /* Large resource descriptors */ - - struct aml_resource_memory24 memory24; - struct aml_resource_generic_register generic_reg; - struct aml_resource_vendor_large vendor_large; - struct aml_resource_memory32 memory32; - struct aml_resource_fixed_memory32 fixed_memory32; - struct aml_resource_address16 address16; - struct aml_resource_address32 address32; - struct aml_resource_address64 address64; - struct aml_resource_extended_address64 ext_address64; - struct aml_resource_extended_irq extended_irq; - - /* Utility overlays */ - - struct aml_resource_address address; - u32 dword_item; - u16 word_item; - u8 byte_item; -}; - -#endif diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h index fcd2572e428..e62f10d9a7d 100644 --- a/include/acpi/platform/acenv.h +++ b/include/acpi/platform/acenv.h @@ -44,14 +44,26 @@ #ifndef __ACENV_H__ #define __ACENV_H__ -/* +/* Types for ACPI_MUTEX_TYPE */ + +#define ACPI_BINARY_SEMAPHORE 0 +#define ACPI_OSL_MUTEX 1 + +/* Types for DEBUGGER_THREADING */ + +#define DEBUGGER_SINGLE_THREADED 0 +#define DEBUGGER_MULTI_THREADED 1 + +/****************************************************************************** + * * Configuration for ACPI tools and utilities - */ + * + *****************************************************************************/ #ifdef ACPI_LIBRARY /* * Note: The non-debug version of the acpi_library does not contain any - * debug support, for minimimal size. The debug version uses ACPI_FULL_DEBUG + * debug support, for minimal size. The debug version uses ACPI_FULL_DEBUG */ #define ACPI_USE_LOCAL_CACHE #endif @@ -75,17 +87,6 @@ #define ACPI_DBG_TRACK_ALLOCATIONS #endif -#ifdef ACPI_DASM_APP -#ifndef MSDOS -#define ACPI_DEBUG_OUTPUT -#endif -#define ACPI_APPLICATION -#define ACPI_DISASSEMBLER -#define ACPI_NO_METHOD_EXECUTION -#define ACPI_LARGE_NAMESPACE_NODE -#define ACPI_DATA_TABLE_DISASSEMBLY -#endif - #ifdef ACPI_APPLICATION #define ACPI_USE_SYSTEM_CLIBRARY #define ACPI_USE_LOCAL_CACHE @@ -179,6 +180,19 @@ /*! [End] no source code translation !*/ +/****************************************************************************** + * + * Miscellaneous configuration + * + *****************************************************************************/ + +/* + * Are mutexes supported by the host? default is no, use binary semaphores. + */ +#ifndef ACPI_MUTEX_TYPE +#define ACPI_MUTEX_TYPE ACPI_BINARY_SEMAPHORE +#endif + /* * Debugger threading model * Use single threaded if the entire subsystem is contained in an application @@ -187,9 +201,6 @@ * By default the model is single threaded if ACPI_APPLICATION is set, * multi-threaded if ACPI_APPLICATION is not set. */ -#define DEBUGGER_SINGLE_THREADED 0 -#define DEBUGGER_MULTI_THREADED 1 - #ifndef DEBUGGER_THREADING #ifdef ACPI_APPLICATION #define DEBUGGER_THREADING DEBUGGER_SINGLE_THREADED diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 0515e754449..6d49b2a498c 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -46,6 +46,7 @@ #define ACPI_USE_SYSTEM_CLIBRARY #define ACPI_USE_DO_WHILE_0 +#define ACPI_MUTEX_TYPE ACPI_BINARY_SEMAPHORE #ifdef __KERNEL__ @@ -70,9 +71,6 @@ #define ACPI_EXPORT_SYMBOL(symbol) EXPORT_SYMBOL(symbol); #define strtoul simple_strtoul -/* Full namespace pathname length limit - arbitrary */ -#define ACPI_PATHNAME_MAX 256 - #else /* !__KERNEL__ */ #include <stdarg.h> diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild index 1f44e7c7699..0f8956def73 100644 --- a/include/asm-frv/Kbuild +++ b/include/asm-frv/Kbuild @@ -3,4 +3,3 @@ include include/asm-generic/Kbuild.asm header-y += registers.h unifdef-y += termios.h -unifdef-y += swab.h diff --git a/include/asm-frv/byteorder.h b/include/asm-frv/byteorder.h index 1187e51ecd1..f29b7593e08 100644 --- a/include/asm-frv/byteorder.h +++ b/include/asm-frv/byteorder.h @@ -1,7 +1,6 @@ #ifndef _ASM_BYTEORDER_H #define _ASM_BYTEORDER_H -#include <asm/swab.h> #include <linux/byteorder/big_endian.h> #endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-frv/mmu.h b/include/asm-frv/mmu.h index 22c03714fb1..86ca0e86e7d 100644 --- a/include/asm-frv/mmu.h +++ b/include/asm-frv/mmu.h @@ -22,7 +22,6 @@ typedef struct { unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */ #else - struct vm_list_struct *vmlist; unsigned long end_brk; #endif diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm index 1870d5e05f1..70d185534b9 100644 --- a/include/asm-generic/Kbuild.asm +++ b/include/asm-generic/Kbuild.asm @@ -31,6 +31,7 @@ unifdef-y += socket.h unifdef-y += sockios.h unifdef-y += stat.h unifdef-y += statfs.h +unifdef-y += swab.h unifdef-y += termbits.h unifdef-y += termios.h unifdef-y += types.h diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 72ebe91005a..8e6d0ca70ab 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, * track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot, +static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size) { return 0; @@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { } #else -extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot, +extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size); extern int track_pfn_vma_copy(struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn, diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h index 89061c1a67d..763e3b060f4 100644 --- a/include/asm-generic/rtc.h +++ b/include/asm-generic/rtc.h @@ -42,7 +42,7 @@ static inline unsigned char rtc_is_updating(void) return uip; } -static inline unsigned int get_rtc_time(struct rtc_time *time) +static inline unsigned int __get_rtc_time(struct rtc_time *time) { unsigned char ctrl; unsigned long flags; @@ -108,8 +108,12 @@ static inline unsigned int get_rtc_time(struct rtc_time *time) return RTC_24H; } +#ifndef get_rtc_time +#define get_rtc_time __get_rtc_time +#endif + /* Set the current date and time in the real time clock. */ -static inline int set_rtc_time(struct rtc_time *time) +static inline int __set_rtc_time(struct rtc_time *time) { unsigned long flags; unsigned char mon, day, hrs, min, sec; @@ -190,11 +194,15 @@ static inline int set_rtc_time(struct rtc_time *time) return 0; } +#ifndef set_rtc_time +#define set_rtc_time __set_rtc_time +#endif + static inline unsigned int get_rtc_ss(void) { struct rtc_time h; - get_rtc_time(&h); + __get_rtc_time(&h); return h.tm_sec; } diff --git a/include/asm-m32r/Kbuild b/include/asm-m32r/Kbuild index 27b108a86b3..c68e1680da0 100644 --- a/include/asm-m32r/Kbuild +++ b/include/asm-m32r/Kbuild @@ -1,2 +1 @@ include include/asm-generic/Kbuild.asm -unifdef-y += swab.h diff --git a/include/asm-m32r/byteorder.h b/include/asm-m32r/byteorder.h index 61ff9cfd845..21855d8b028 100644 --- a/include/asm-m32r/byteorder.h +++ b/include/asm-m32r/byteorder.h @@ -1,8 +1,6 @@ #ifndef _ASM_M32R_BYTEORDER_H #define _ASM_M32R_BYTEORDER_H -#include <asm/swab.h> - #if defined(__LITTLE_ENDIAN__) # include <linux/byteorder/little_endian.h> #else diff --git a/include/asm-m32r/mmu.h b/include/asm-m32r/mmu.h index d9bd724479c..150cb92bb66 100644 --- a/include/asm-m32r/mmu.h +++ b/include/asm-m32r/mmu.h @@ -4,7 +4,6 @@ #if !defined(CONFIG_MMU) typedef struct { - struct vm_list_struct *vmlist; unsigned long end_brk; } mm_context_t; diff --git a/include/asm-m68k/Kbuild b/include/asm-m68k/Kbuild index 52fd96b4142..1a922fad76f 100644 --- a/include/asm-m68k/Kbuild +++ b/include/asm-m68k/Kbuild @@ -1,3 +1,2 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h -unifdef-y += swab.h diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h index 300866523b8..31b260a8880 100644 --- a/include/asm-m68k/byteorder.h +++ b/include/asm-m68k/byteorder.h @@ -1,7 +1,6 @@ #ifndef _M68K_BYTEORDER_H #define _M68K_BYTEORDER_H -#include <asm/swab.h> #include <linux/byteorder/big_endian.h> #endif /* _M68K_BYTEORDER_H */ diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h index 965abb8bc7f..3c19027331f 100644 --- a/include/asm-m68k/unistd.h +++ b/include/asm-m68k/unistd.h @@ -5,6 +5,7 @@ * This file contains the system call numbers. */ +#define __NR_restart_syscall 0 #define __NR_exit 1 #define __NR_fork 2 #define __NR_read 3 @@ -359,9 +360,6 @@ #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION -/* whitelist for checksyscalls */ -#define __IGNORE_restart_syscall - /* * "Conditional" syscalls * diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild index 27b108a86b3..c68e1680da0 100644 --- a/include/asm-mn10300/Kbuild +++ b/include/asm-mn10300/Kbuild @@ -1,2 +1 @@ include include/asm-generic/Kbuild.asm -unifdef-y += swab.h diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h index 45b18ded19e..5dd0bdd9fee 100644 --- a/include/asm-mn10300/byteorder.h +++ b/include/asm-mn10300/byteorder.h @@ -1,7 +1,6 @@ #ifndef _ASM_BYTEORDER_H #define _ASM_BYTEORDER_H -#include <asm/swab.h> #include <linux/byteorder/little_endian.h> #endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-xtensa/Kbuild b/include/asm-xtensa/Kbuild deleted file mode 100644 index c68e1680da0..00000000000 --- a/include/asm-xtensa/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-xtensa/asmmacro.h b/include/asm-xtensa/asmmacro.h deleted file mode 100644 index 76915cabad1..00000000000 --- a/include/asm-xtensa/asmmacro.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * include/asm-xtensa/asmmacro.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ASMMACRO_H -#define _XTENSA_ASMMACRO_H - -#include <asm/variant/core.h> - -/* - * Some little helpers for loops. Use zero-overhead-loops - * where applicable and if supported by the processor. - * - * __loopi ar, at, size, inc - * ar register initialized with the start address - * at scratch register used by macro - * size size immediate value - * inc increment - * - * __loops ar, as, at, inc_log2[, mask_log2][, cond][, ncond] - * ar register initialized with the start address - * as register initialized with the size - * at scratch register use by macro - * inc_log2 increment [in log2] - * mask_log2 mask [in log2] - * cond true condition (used in loop'cond') - * ncond false condition (used in b'ncond') - * - * __loop as - * restart loop. 'as' register must not have been modified! - * - * __endla ar, at, incr - * ar start address (modified) - * as scratch register used by macro - * inc increment - */ - -/* - * loop for given size as immediate - */ - - .macro __loopi ar, at, size, incr - -#if XCHAL_HAVE_LOOPS - movi \at, ((\size + \incr - 1) / (\incr)) - loop \at, 99f -#else - addi \at, \ar, \size - 98: -#endif - - .endm - -/* - * loop for given size in register - */ - - .macro __loops ar, as, at, incr_log2, mask_log2, cond, ncond - -#if XCHAL_HAVE_LOOPS - .ifgt \incr_log2 - 1 - addi \at, \as, (1 << \incr_log2) - 1 - .ifnc \mask_log2, - extui \at, \at, \incr_log2, \mask_log2 - .else - srli \at, \at, \incr_log2 - .endif - .endif - loop\cond \at, 99f -#else - .ifnc \mask_log2, - extui \at, \as, \incr_log2, \mask_log2 - .else - .ifnc \ncond, - srli \at, \as, \incr_log2 - .endif - .endif - .ifnc \ncond, - b\ncond \at, 99f - - .endif - .ifnc \mask_log2, - slli \at, \at, \incr_log2 - add \at, \ar, \at - .else - add \at, \ar, \as - .endif -#endif - 98: - - .endm - -/* - * loop from ar to ax - */ - - .macro __loopt ar, as, at, incr_log2 - -#if XCHAL_HAVE_LOOPS - sub \at, \as, \ar - .ifgt \incr_log2 - 1 - addi \at, \at, (1 << \incr_log2) - 1 - srli \at, \at, \incr_log2 - .endif - loop \at, 99f -#else - 98: -#endif - - .endm - -/* - * restart loop. registers must be unchanged - */ - - .macro __loop as - -#if XCHAL_HAVE_LOOPS - loop \as, 99f -#else - 98: -#endif - - .endm - -/* - * end of loop with no increment of the address. - */ - - .macro __endl ar, as -#if !XCHAL_HAVE_LOOPS - bltu \ar, \as, 98b -#endif - 99: - .endm - -/* - * end of loop with increment of the address. - */ - - .macro __endla ar, as, incr - addi \ar, \ar, \incr - __endl \ar \as - .endm - - -#endif /* _XTENSA_ASMMACRO_H */ diff --git a/include/asm-xtensa/atomic.h b/include/asm-xtensa/atomic.h deleted file mode 100644 index 67ad67bed8c..00000000000 --- a/include/asm-xtensa/atomic.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * include/asm-xtensa/atomic.h - * - * Atomic operations that C can't guarantee us. Useful for resource counting.. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ATOMIC_H -#define _XTENSA_ATOMIC_H - -#include <linux/stringify.h> -#include <linux/types.h> - -#ifdef __KERNEL__ -#include <asm/processor.h> -#include <asm/system.h> - -#define ATOMIC_INIT(i) { (i) } - -/* - * This Xtensa implementation assumes that the right mechanism - * for exclusion is for locking interrupts to level 1. - * - * Locking interrupts looks like this: - * - * rsil a15, 1 - * <code> - * wsr a15, PS - * rsync - * - * Note that a15 is used here because the register allocation - * done by the compiler is not guaranteed and a window overflow - * may not occur between the rsil and wsr instructions. By using - * a15 in the rsil, the machine is guaranteed to be in a state - * where no register reference will cause an overflow. - */ - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -#define atomic_read(v) ((v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - */ -#define atomic_set(v,i) ((v)->counter = (i)) - -/** - * atomic_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v. - */ -static inline void atomic_add(int i, atomic_t * v) -{ - unsigned int vval; - - __asm__ __volatile__( - "rsil a15, "__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "add %0, %0, %1 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval) - : "a" (i), "a" (v) - : "a15", "memory" - ); -} - -/** - * atomic_sub - subtract the atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v. - */ -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned int vval; - - __asm__ __volatile__( - "rsil a15, "__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "sub %0, %0, %1 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval) - : "a" (i), "a" (v) - : "a15", "memory" - ); -} - -/* - * We use atomic_{add|sub}_return to define other functions. - */ - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned int vval; - - __asm__ __volatile__( - "rsil a15,"__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "add %0, %0, %1 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval) - : "a" (i), "a" (v) - : "a15", "memory" - ); - - return vval; -} - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned int vval; - - __asm__ __volatile__( - "rsil a15,"__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "sub %0, %0, %1 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval) - : "a" (i), "a" (v) - : "a15", "memory" - ); - - return vval; -} - -/** - * atomic_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns - * true if the result is zero, or false for all - * other cases. - */ -#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) - -/** - * atomic_inc - increment atomic variable - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1. - */ -#define atomic_inc(v) atomic_add(1,(v)) - -/** - * atomic_inc - increment atomic variable - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1. - */ -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -/** - * atomic_dec - decrement atomic variable - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1. - */ -#define atomic_dec(v) atomic_sub(1,(v)) - -/** - * atomic_dec_return - decrement atomic variable - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1. - */ -#define atomic_dec_return(v) atomic_sub_return(1,(v)) - -/** - * atomic_dec_and_test - decrement and test - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and - * returns true if the result is 0, or false for all other - * cases. - */ -#define atomic_dec_and_test(v) (atomic_sub_return(1,(v)) == 0) - -/** - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_add_return(1,(v)) == 0) - -/** - * atomic_add_negative - add and test if negative - * @v: pointer of type atomic_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define atomic_add_negative(i,v) (atomic_add_return((i),(v)) < 0) - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned int all_f = -1; - unsigned int vval; - - __asm__ __volatile__( - "rsil a15,"__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "xor %1, %4, %3 \n\t" - "and %0, %0, %4 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval), "=a" (mask) - : "a" (v), "a" (all_f), "1" (mask) - : "a15", "memory" - ); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned int vval; - - __asm__ __volatile__( - "rsil a15,"__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %2, 0 \n\t" - "or %0, %0, %1 \n\t" - "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n" - : "=&a" (vval) - : "a" (mask), "a" (v) - : "a15", "memory" - ); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic.h> -#endif /* __KERNEL__ */ - -#endif /* _XTENSA_ATOMIC_H */ - diff --git a/include/asm-xtensa/auxvec.h b/include/asm-xtensa/auxvec.h deleted file mode 100644 index 257dec75c5a..00000000000 --- a/include/asm-xtensa/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __XTENSA_AUXVEC_H -#define __XTENSA_AUXVEC_H - -#endif diff --git a/include/asm-xtensa/bitops.h b/include/asm-xtensa/bitops.h deleted file mode 100644 index 6c3930397bd..00000000000 --- a/include/asm-xtensa/bitops.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * include/asm-xtensa/bitops.h - * - * Atomic operations that C can't guarantee us.Useful for resource counting etc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_BITOPS_H -#define _XTENSA_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <asm/processor.h> -#include <asm/byteorder.h> -#include <asm/system.h> - -#ifdef CONFIG_SMP -# error SMP not supported on this architecture -#endif - -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#include <asm-generic/bitops/atomic.h> -#include <asm-generic/bitops/non-atomic.h> - -#if XCHAL_HAVE_NSA - -static inline unsigned long __cntlz (unsigned long x) -{ - int lz; - asm ("nsau %0, %1" : "=r" (lz) : "r" (x)); - return lz; -} - -/* - * ffz: Find first zero in word. Undefined if no zero exists. - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ - -static inline int ffz(unsigned long x) -{ - return 31 - __cntlz(~x & -~x); -} - -/* - * __ffs: Find first bit set in word. Return 0 for bit 0 - */ - -static inline int __ffs(unsigned long x) -{ - return 31 - __cntlz(x & -x); -} - -/* - * ffs: Find first bit set in word. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -static inline int ffs(unsigned long x) -{ - return 32 - __cntlz(x & -x); -} - -/* - * fls: Find last (most-significant) bit set in word. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ - -static inline int fls (unsigned int x) -{ - return 32 - __cntlz(x); -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - return 31 - __cntlz(word); -} -#else - -/* Use the generic implementation if we don't have the nsa/nsau instructions. */ - -# include <asm-generic/bitops/ffs.h> -# include <asm-generic/bitops/__ffs.h> -# include <asm-generic/bitops/ffz.h> -# include <asm-generic/bitops/fls.h> -# include <asm-generic/bitops/__fls.h> - -#endif - -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/ext2-non-atomic.h> - -#ifdef __XTENSA_EL__ -# define ext2_set_bit_atomic(lock,nr,addr) \ - test_and_set_bit((nr), (unsigned long*)(addr)) -# define ext2_clear_bit_atomic(lock,nr,addr) \ - test_and_clear_bit((nr), (unsigned long*)(addr)) -#elif defined(__XTENSA_EB__) -# define ext2_set_bit_atomic(lock,nr,addr) \ - test_and_set_bit((nr) ^ 0x18, (unsigned long*)(addr)) -# define ext2_clear_bit_atomic(lock,nr,addr) \ - test_and_clear_bit((nr) ^ 0x18, (unsigned long*)(addr)) -#else -# error processor byte order undefined! -#endif - -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/minix.h> - -#endif /* __KERNEL__ */ - -#endif /* _XTENSA_BITOPS_H */ diff --git a/include/asm-xtensa/bootparam.h b/include/asm-xtensa/bootparam.h deleted file mode 100644 index 9983f2c1b7e..00000000000 --- a/include/asm-xtensa/bootparam.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-xtensa/bootparam.h - * - * Definition of the Linux/Xtensa boot parameter structure - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - * (Concept borrowed from the 68K port) - */ - -#ifndef _XTENSA_BOOTPARAM_H -#define _XTENSA_BOOTPARAM_H - -#define BP_VERSION 0x0001 - -#define BP_TAG_COMMAND_LINE 0x1001 /* command line (0-terminated string)*/ -#define BP_TAG_INITRD 0x1002 /* ramdisk addr and size (bp_meminfo) */ -#define BP_TAG_MEMORY 0x1003 /* memory addr and size (bp_meminfo) */ -#define BP_TAG_SERIAL_BAUSRATE 0x1004 /* baud rate of current console. */ -#define BP_TAG_SERIAL_PORT 0x1005 /* serial device of current console */ - -#define BP_TAG_FIRST 0x7B0B /* first tag with a version number */ -#define BP_TAG_LAST 0x7E0B /* last tag */ - -#ifndef __ASSEMBLY__ - -/* All records are aligned to 4 bytes */ - -typedef struct bp_tag { - unsigned short id; /* tag id */ - unsigned short size; /* size of this record excluding the structure*/ - unsigned long data[0]; /* data */ -} bp_tag_t; - -typedef struct meminfo { - unsigned long type; - unsigned long start; - unsigned long end; -} meminfo_t; - -#define SYSMEM_BANKS_MAX 5 - -#define MEMORY_TYPE_CONVENTIONAL 0x1000 -#define MEMORY_TYPE_NONE 0x2000 - -typedef struct sysmem_info { - int nr_banks; - meminfo_t bank[SYSMEM_BANKS_MAX]; -} sysmem_info_t; - -extern sysmem_info_t sysmem; - -#endif -#endif - - - diff --git a/include/asm-xtensa/bug.h b/include/asm-xtensa/bug.h deleted file mode 100644 index 3e52d72712f..00000000000 --- a/include/asm-xtensa/bug.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/bug.h - * - * Macros to cause a 'bug' message. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_BUG_H -#define _XTENSA_BUG_H - -#include <asm-generic/bug.h> - -#endif /* _XTENSA_BUG_H */ diff --git a/include/asm-xtensa/bugs.h b/include/asm-xtensa/bugs.h deleted file mode 100644 index 69b29d19824..00000000000 --- a/include/asm-xtensa/bugs.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/bugs.h - * - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Xtensa processors don't have any bugs. :) - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef _XTENSA_BUGS_H -#define _XTENSA_BUGS_H - -static void check_bugs(void) { } - -#endif /* _XTENSA_BUGS_H */ diff --git a/include/asm-xtensa/byteorder.h b/include/asm-xtensa/byteorder.h deleted file mode 100644 index 765edf17a9a..00000000000 --- a/include/asm-xtensa/byteorder.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * include/asm-xtensa/byteorder.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_BYTEORDER_H -#define _XTENSA_BYTEORDER_H - -#include <asm/types.h> -#include <linux/compiler.h> - -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __u32 res; - /* instruction sequence from Xtensa ISA release 2/2000 */ - __asm__("ssai 8 \n\t" - "srli %0, %1, 16 \n\t" - "src %0, %0, %1 \n\t" - "src %0, %0, %0 \n\t" - "src %0, %1, %0 \n" - : "=&a" (res) - : "a" (x) - ); - return res; -} - -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - /* Given that 'short' values are signed (i.e., can be negative), - * we cannot assume that the upper 16-bits of the register are - * zero. We are careful to mask values after shifting. - */ - - /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc - * inserts an extui instruction after putting this function inline - * to ensure that it uses only the least-significant 16 bits of - * the result. xt-xcc doesn't use an extui, but assumes the - * __asm__ macro follows convention that the upper 16 bits of an - * 'unsigned short' result are still zero. This macro doesn't - * follow convention; indeed, it leaves garbage in the upport 16 - * bits of the register. - - * Declaring the temporary variables 'res' and 'tmp' to be 32-bit - * types while the return type of the function is a 16-bit type - * forces both compilers to insert exactly one extui instruction - * (or equivalent) to mask off the upper 16 bits. */ - - __u32 res; - __u32 tmp; - - __asm__("extui %1, %2, 8, 8\n\t" - "slli %0, %2, 8 \n\t" - "or %0, %0, %1 \n" - : "=&a" (res), "=&a" (tmp) - : "a" (x) - ); - - return res; -} - -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __XTENSA_EL__ -# include <linux/byteorder/little_endian.h> -#elif defined(__XTENSA_EB__) -# include <linux/byteorder/big_endian.h> -#else -# error processor byte order undefined! -#endif - -#endif /* _XTENSA_BYTEORDER_H */ diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h deleted file mode 100644 index 3bba2a540cf..00000000000 --- a/include/asm-xtensa/cache.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-xtensa/cache.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_CACHE_H -#define _XTENSA_CACHE_H - -#include <asm/variant/core.h> - -#define L1_CACHE_SHIFT XCHAL_DCACHE_LINEWIDTH -#define L1_CACHE_BYTES XCHAL_DCACHE_LINESIZE -#define SMP_CACHE_BYTES L1_CACHE_BYTES - -#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS) -#define ICACHE_WAY_SIZE (XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS) -#define DCACHE_WAY_SHIFT (XCHAL_DCACHE_SETWIDTH + XCHAL_DCACHE_LINEWIDTH) -#define ICACHE_WAY_SHIFT (XCHAL_ICACHE_SETWIDTH + XCHAL_ICACHE_LINEWIDTH) - -/* Maximum cache size per way. */ -#if DCACHE_WAY_SIZE >= ICACHE_WAY_SIZE -# define CACHE_WAY_SIZE DCACHE_WAY_SIZE -#else -# define CACHE_WAY_SIZE ICACHE_WAY_SIZE -#endif - - -#endif /* _XTENSA_CACHE_H */ diff --git a/include/asm-xtensa/cacheasm.h b/include/asm-xtensa/cacheasm.h deleted file mode 100644 index 2c20a58f94c..00000000000 --- a/include/asm-xtensa/cacheasm.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * include/asm-xtensa/cacheasm.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Tensilica Inc. - */ - -#include <asm/cache.h> -#include <asm/asmmacro.h> -#include <linux/stringify.h> - -/* - * Define cache functions as macros here so that they can be used - * by the kernel and boot loader. We should consider moving them to a - * library that can be linked by both. - * - * Locking - * - * ___unlock_dcache_all - * ___unlock_icache_all - * - * Flush and invaldating - * - * ___flush_invalidate_dcache_{all|range|page} - * ___flush_dcache_{all|range|page} - * ___invalidate_dcache_{all|range|page} - * ___invalidate_icache_{all|range|page} - * - */ - - .macro __loop_cache_all ar at insn size line_width - - movi \ar, 0 - - __loopi \ar, \at, \size, (4 << (\line_width)) - \insn \ar, 0 << (\line_width) - \insn \ar, 1 << (\line_width) - \insn \ar, 2 << (\line_width) - \insn \ar, 3 << (\line_width) - __endla \ar, \at, 4 << (\line_width) - - .endm - - - .macro __loop_cache_range ar as at insn line_width - - extui \at, \ar, 0, \line_width - add \as, \as, \at - - __loops \ar, \as, \at, \line_width - \insn \ar, 0 - __endla \ar, \at, (1 << (\line_width)) - - .endm - - - .macro __loop_cache_page ar at insn line_width - - __loopi \ar, \at, PAGE_SIZE, 4 << (\line_width) - \insn \ar, 0 << (\line_width) - \insn \ar, 1 << (\line_width) - \insn \ar, 2 << (\line_width) - \insn \ar, 3 << (\line_width) - __endla \ar, \at, 4 << (\line_width) - - .endm - - -#if XCHAL_DCACHE_LINE_LOCKABLE - - .macro ___unlock_dcache_all ar at - - __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH - - .endm - -#endif - -#if XCHAL_ICACHE_LINE_LOCKABLE - - .macro ___unlock_icache_all ar at - - __loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH - - .endm -#endif - - .macro ___flush_invalidate_dcache_all ar at - - __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___flush_dcache_all ar at - - __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_dcache_all ar at - - __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ - XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_icache_all ar at - - __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ - XCHAL_ICACHE_LINEWIDTH - - .endm - - - - .macro ___flush_invalidate_dcache_range ar as at - - __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___flush_dcache_range ar as at - - __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_dcache_range ar as at - - __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_icache_range ar as at - - __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH - - .endm - - - - .macro ___flush_invalidate_dcache_page ar as - - __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___flush_dcache_page ar as - - __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_dcache_page ar as - - __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH - - .endm - - - .macro ___invalidate_icache_page ar as - - __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH - - .endm - diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h deleted file mode 100644 index 94c4c53a099..00000000000 --- a/include/asm-xtensa/cacheflush.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * include/asm-xtensa/cacheflush.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_CACHEFLUSH_H -#define _XTENSA_CACHEFLUSH_H - -#ifdef __KERNEL__ - -#include <linux/mm.h> -#include <asm/processor.h> -#include <asm/page.h> - -/* - * Lo-level routines for cache flushing. - * - * invalidate data or instruction cache: - * - * __invalidate_icache_all() - * __invalidate_icache_page(adr) - * __invalidate_dcache_page(adr) - * __invalidate_icache_range(from,size) - * __invalidate_dcache_range(from,size) - * - * flush data cache: - * - * __flush_dcache_page(adr) - * - * flush and invalidate data cache: - * - * __flush_invalidate_dcache_all() - * __flush_invalidate_dcache_page(adr) - * __flush_invalidate_dcache_range(from,size) - * - * specials for cache aliasing: - * - * __flush_invalidate_dcache_page_alias(vaddr,paddr) - * __invalidate_icache_page_alias(vaddr,paddr) - */ - -extern void __invalidate_dcache_all(void); -extern void __invalidate_icache_all(void); -extern void __invalidate_dcache_page(unsigned long); -extern void __invalidate_icache_page(unsigned long); -extern void __invalidate_icache_range(unsigned long, unsigned long); -extern void __invalidate_dcache_range(unsigned long, unsigned long); - - -#if XCHAL_DCACHE_IS_WRITEBACK -extern void __flush_invalidate_dcache_all(void); -extern void __flush_dcache_page(unsigned long); -extern void __flush_dcache_range(unsigned long, unsigned long); -extern void __flush_invalidate_dcache_page(unsigned long); -extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); -#else -# define __flush_dcache_range(p,s) do { } while(0) -# define __flush_dcache_page(p) do { } while(0) -# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) -# define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) -#endif - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) -extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long); -#endif -#if (ICACHE_WAY_SIZE > PAGE_SIZE) -extern void __invalidate_icache_page_alias(unsigned long, unsigned long); -#else -# define __invalidate_icache_page_alias(v,p) do { } while(0) -#endif - -/* - * We have physically tagged caches - nothing to do here - - * unless we have cache aliasing. - * - * Pages can get remapped. Because this might change the 'color' of that page, - * we have to flush the cache before the PTE is changed. - * (see also Documentation/cachetlb.txt) - */ - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) - -#define flush_cache_all() \ - do { \ - __flush_invalidate_dcache_all(); \ - __invalidate_icache_all(); \ - } while (0) - -#define flush_cache_mm(mm) flush_cache_all() -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -#define flush_cache_vmap(start,end) flush_cache_all() -#define flush_cache_vunmap(start,end) flush_cache_all() - -extern void flush_dcache_page(struct page*); -extern void flush_cache_range(struct vm_area_struct*, ulong, ulong); -extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long); - -#else - -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) - -#define flush_cache_vmap(start,end) do { } while (0) -#define flush_cache_vunmap(start,end) do { } while (0) - -#define flush_dcache_page(page) do { } while (0) - -#define flush_cache_page(vma,addr,pfn) do { } while (0) -#define flush_cache_range(vma,start,end) do { } while (0) - -#endif - -/* Ensure consistency between data and instruction cache. */ -#define flush_icache_range(start,end) \ - do { \ - __flush_dcache_range(start, (end) - (start)); \ - __invalidate_icache_range(start,(end) - (start)); \ - } while (0) - -/* This is not required, see Documentation/cachetlb.txt */ -#define flush_icache_page(vma,page) do { } while (0) - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) - -extern void copy_to_user_page(struct vm_area_struct*, struct page*, - unsigned long, void*, const void*, unsigned long); -extern void copy_from_user_page(struct vm_area_struct*, struct page*, - unsigned long, void*, const void*, unsigned long); - -#else - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - __flush_dcache_range((unsigned long) dst, len); \ - __invalidate_icache_range((unsigned long) dst, len); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#endif - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_CACHEFLUSH_H */ diff --git a/include/asm-xtensa/checksum.h b/include/asm-xtensa/checksum.h deleted file mode 100644 index 23534c60b3a..00000000000 --- a/include/asm-xtensa/checksum.h +++ /dev/null @@ -1,250 +0,0 @@ -/* - * include/asm-xtensa/checksum.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_CHECKSUM_H -#define _XTENSA_CHECKSUM_H - -#include <linux/in6.h> -#include <asm/variant/core.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len, __wsum sum, - int *src_err_ptr, int *dst_err_ptr); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the access_ok(). - */ -static inline -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); -} - -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) -{ - return csum_partial_copy_generic((__force const void *)src, dst, - len, sum, err_ptr, NULL); -} - -/* - * Fold a partial checksum - */ - -static __inline__ __sum16 csum_fold(__wsum sum) -{ - unsigned int __dummy; - __asm__("extui %1, %0, 16, 16\n\t" - "extui %0 ,%0, 0, 16\n\t" - "add %0, %0, %1\n\t" - "slli %1, %0, 16\n\t" - "add %0, %0, %1\n\t" - "extui %0, %0, 16, 16\n\t" - "neg %0, %0\n\t" - "addi %0, %0, -1\n\t" - "extui %0, %0, 0, 16\n\t" - : "=r" (sum), "=&r" (__dummy) - : "0" (sum)); - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum, tmp, endaddr; - - __asm__ __volatile__( - "sub %0, %0, %0\n\t" -#if XCHAL_HAVE_LOOPS - "loopgtz %2, 2f\n\t" -#else - "beqz %2, 2f\n\t" - "slli %4, %2, 2\n\t" - "add %4, %4, %1\n\t" - "0:\t" -#endif - "l32i %3, %1, 0\n\t" - "add %0, %0, %3\n\t" - "bgeu %0, %3, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "addi %1, %1, 4\n\t" -#if !XCHAL_HAVE_LOOPS - "blt %1, %4, 0b\n\t" -#endif - "2:\t" - /* Since the input registers which are loaded with iph and ihl - are modified, we must also specify them as outputs, or gcc - will assume they contain their original values. */ - : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr) - : "1" (iph), "2" (ihl)); - - return csum_fold(sum); -} - -static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - -#ifdef __XTENSA_EL__ - unsigned long len_proto = (len + proto) << 8; -#elif defined(__XTENSA_EB__) - unsigned long len_proto = len + proto; -#else -# error processor byte order undefined! -#endif - __asm__("add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "add %0, %0, %2\n\t" - "bgeu %0, %2, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "add %0, %0, %3\n\t" - "bgeu %0, %3, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - : "=r" (sum), "=r" (len_proto) - : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)); - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static __inline__ __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - unsigned int __dummy; - __asm__("l32i %1, %2, 0\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %2, 4\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %2, 8\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %2, 12\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %3, 0\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %3, 4\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %3, 8\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "l32i %1, %3, 12\n\t" - "add %0, %0, %1\n\t" - "bgeu %0, %1, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "add %0, %0, %4\n\t" - "bgeu %0, %4, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - "add %0, %0, %5\n\t" - "bgeu %0, %5, 1f\n\t" - "addi %0, %0, 1\n\t" - "1:\t" - : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); - - return csum_fold(sum); -} - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -static __inline__ __wsum csum_and_copy_to_user(const void *src, void __user *dst, - int len, __wsum sum, int *err_ptr) -{ - if (access_ok(VERIFY_WRITE, dst, len)) - return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr); - - if (len) - *err_ptr = -EFAULT; - - return (__force __wsum)-1; /* invalid checksum */ -} -#endif diff --git a/include/asm-xtensa/coprocessor.h b/include/asm-xtensa/coprocessor.h deleted file mode 100644 index 1cbcf9001a4..00000000000 --- a/include/asm-xtensa/coprocessor.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * include/asm-xtensa/coprocessor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2007 Tensilica Inc. - */ - - -#ifndef _XTENSA_COPROCESSOR_H -#define _XTENSA_COPROCESSOR_H - -#include <linux/stringify.h> -#include <asm/variant/tie.h> -#include <asm/types.h> - -#ifdef __ASSEMBLY__ -# include <asm/variant/tie-asm.h> - -.macro xchal_sa_start a b - .set .Lxchal_pofs_, 0 - .set .Lxchal_ofs_, 0 -.endm - -.macro xchal_sa_align ptr minofs maxofs ofsalign totalign - .set .Lxchal_ofs_, .Lxchal_ofs_ + .Lxchal_pofs_ + \totalign - 1 - .set .Lxchal_ofs_, (.Lxchal_ofs_ & -\totalign) - .Lxchal_pofs_ -.endm - -#define _SELECT ( XTHAL_SAS_TIE | XTHAL_SAS_OPT \ - | XTHAL_SAS_CC \ - | XTHAL_SAS_CALR | XTHAL_SAS_CALE ) - -.macro save_xtregs_opt ptr clb at1 at2 at3 at4 offset - .if XTREGS_OPT_SIZE > 0 - addi \clb, \ptr, \offset - xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT - .endif -.endm - -.macro load_xtregs_opt ptr clb at1 at2 at3 at4 offset - .if XTREGS_OPT_SIZE > 0 - addi \clb, \ptr, \offset - xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT - .endif -.endm -#undef _SELECT - -#define _SELECT ( XTHAL_SAS_TIE | XTHAL_SAS_OPT \ - | XTHAL_SAS_NOCC \ - | XTHAL_SAS_CALR | XTHAL_SAS_CALE | XTHAL_SAS_GLOB ) - -.macro save_xtregs_user ptr clb at1 at2 at3 at4 offset - .if XTREGS_USER_SIZE > 0 - addi \clb, \ptr, \offset - xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT - .endif -.endm - -.macro load_xtregs_user ptr clb at1 at2 at3 at4 offset - .if XTREGS_USER_SIZE > 0 - addi \clb, \ptr, \offset - xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT - .endif -.endm -#undef _SELECT - - - -#endif /* __ASSEMBLY__ */ - -/* - * XTENSA_HAVE_COPROCESSOR(x) returns 1 if coprocessor x is configured. - * - * XTENSA_HAVE_IO_PORT(x) returns 1 if io-port x is configured. - * - */ - -#define XTENSA_HAVE_COPROCESSOR(x) \ - ((XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK) & (1 << (x))) -#define XTENSA_HAVE_COPROCESSORS \ - (XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK) -#define XTENSA_HAVE_IO_PORT(x) \ - (XCHAL_CP_PORT_MASK & (1 << (x))) -#define XTENSA_HAVE_IO_PORTS \ - XCHAL_CP_PORT_MASK - -#ifndef __ASSEMBLY__ - - -#if XCHAL_HAVE_CP - -#define RSR_CPENABLE(x) do { \ - __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \ - } while(0); -#define WSR_CPENABLE(x) do { \ - __asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" \ - :: "a" (x)); \ - } while(0); - -#endif /* XCHAL_HAVE_CP */ - - -/* - * Additional registers. - * We define three types of additional registers: - * ext: extra registers that are used by the compiler - * cpn: optional registers that can be used by a user application - * cpX: coprocessor registers that can only be used if the corresponding - * CPENABLE bit is set. - */ - -#define XCHAL_SA_REG(list,cc,abi,type,y,name,z,align,size,...) \ - __REG ## list (cc, abi, type, name, size, align) - -#define __REG0(cc,abi,t,name,s,a) __REG0_ ## cc (abi,name) -#define __REG1(cc,abi,t,name,s,a) __REG1_ ## cc (name) -#define __REG2(cc,abi,type,...) __REG2_ ## type (__VA_ARGS__) - -#define __REG0_0(abi,name) -#define __REG0_1(abi,name) __REG0_1 ## abi (name) -#define __REG0_10(name) __u32 name; -#define __REG0_11(name) __u32 name; -#define __REG0_12(name) - -#define __REG1_0(name) __u32 name; -#define __REG1_1(name) - -#define __REG2_0(n,s,a) __u32 name; -#define __REG2_1(n,s,a) unsigned char n[s] __attribute__ ((aligned(a))); -#define __REG2_2(n,s,a) unsigned char n[s] __attribute__ ((aligned(a))); - -typedef struct { XCHAL_NCP_SA_LIST(0) } xtregs_opt_t - __attribute__ ((aligned (XCHAL_NCP_SA_ALIGN))); -typedef struct { XCHAL_NCP_SA_LIST(1) } xtregs_user_t - __attribute__ ((aligned (XCHAL_NCP_SA_ALIGN))); - -#if XTENSA_HAVE_COPROCESSORS - -typedef struct { XCHAL_CP0_SA_LIST(2) } xtregs_cp0_t - __attribute__ ((aligned (XCHAL_CP0_SA_ALIGN))); -typedef struct { XCHAL_CP1_SA_LIST(2) } xtregs_cp1_t - __attribute__ ((aligned (XCHAL_CP1_SA_ALIGN))); -typedef struct { XCHAL_CP2_SA_LIST(2) } xtregs_cp2_t - __attribute__ ((aligned (XCHAL_CP2_SA_ALIGN))); -typedef struct { XCHAL_CP3_SA_LIST(2) } xtregs_cp3_t - __attribute__ ((aligned (XCHAL_CP3_SA_ALIGN))); -typedef struct { XCHAL_CP4_SA_LIST(2) } xtregs_cp4_t - __attribute__ ((aligned (XCHAL_CP4_SA_ALIGN))); -typedef struct { XCHAL_CP5_SA_LIST(2) } xtregs_cp5_t - __attribute__ ((aligned (XCHAL_CP5_SA_ALIGN))); -typedef struct { XCHAL_CP6_SA_LIST(2) } xtregs_cp6_t - __attribute__ ((aligned (XCHAL_CP6_SA_ALIGN))); -typedef struct { XCHAL_CP7_SA_LIST(2) } xtregs_cp7_t - __attribute__ ((aligned (XCHAL_CP7_SA_ALIGN))); - -extern struct thread_info* coprocessor_owner[XCHAL_CP_MAX]; -extern void coprocessor_save(void*, int); -extern void coprocessor_load(void*, int); -extern void coprocessor_flush(struct thread_info*, int); -extern void coprocessor_restore(struct thread_info*, int); - -extern void coprocessor_release_all(struct thread_info*); -extern void coprocessor_flush_all(struct thread_info*); - -static inline void coprocessor_clear_cpenable(void) -{ - unsigned long i = 0; - WSR_CPENABLE(i); -} - -#endif /* XTENSA_HAVE_COPROCESSORS */ - -#endif /* !__ASSEMBLY__ */ -#endif /* _XTENSA_COPROCESSOR_H */ diff --git a/include/asm-xtensa/cpumask.h b/include/asm-xtensa/cpumask.h deleted file mode 100644 index ebeede397db..00000000000 --- a/include/asm-xtensa/cpumask.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/cpumask.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_CPUMASK_H -#define _XTENSA_CPUMASK_H - -#include <asm-generic/cpumask.h> - -#endif /* _XTENSA_CPUMASK_H */ diff --git a/include/asm-xtensa/cputime.h b/include/asm-xtensa/cputime.h deleted file mode 100644 index a7fb864a50a..00000000000 --- a/include/asm-xtensa/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _XTENSA_CPUTIME_H -#define _XTENSA_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* _XTENSA_CPUTIME_H */ diff --git a/include/asm-xtensa/current.h b/include/asm-xtensa/current.h deleted file mode 100644 index 8d1eb5d7864..00000000000 --- a/include/asm-xtensa/current.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-xtensa/current.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_CURRENT_H -#define _XTENSA_CURRENT_H - -#ifndef __ASSEMBLY__ - -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#else - -#define CURRENT_SHIFT 13 - -#define GET_CURRENT(reg,sp) \ - GET_THREAD_INFO(reg,sp); \ - l32i reg, reg, TI_TASK \ - -#endif - - -#endif /* XTENSA_CURRENT_H */ diff --git a/include/asm-xtensa/delay.h b/include/asm-xtensa/delay.h deleted file mode 100644 index e1d8c9e010c..00000000000 --- a/include/asm-xtensa/delay.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-xtensa/delay.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - */ - -#ifndef _XTENSA_DELAY_H -#define _XTENSA_DELAY_H - -#include <asm/processor.h> -#include <asm/param.h> - -extern unsigned long loops_per_jiffy; - -static inline void __delay(unsigned long loops) -{ - /* 2 cycles per loop. */ - __asm__ __volatile__ ("1: addi %0, %0, -2; bgeui %0, 2, 1b" - : "=r" (loops) : "0" (loops)); -} - -static __inline__ u32 xtensa_get_ccount(void) -{ - u32 ccount; - asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount)); - return ccount; -} - -/* For SMP/NUMA systems, change boot_cpu_data to something like - * local_cpu_data->... where local_cpu_data points to the current - * cpu. */ - -static __inline__ void udelay (unsigned long usecs) -{ - unsigned long start = xtensa_get_ccount(); - unsigned long cycles = usecs * (loops_per_jiffy / (1000000UL / HZ)); - - /* Note: all variables are unsigned (can wrap around)! */ - while (((unsigned long)xtensa_get_ccount()) - start < cycles) - ; -} - -#endif - diff --git a/include/asm-xtensa/device.h b/include/asm-xtensa/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/include/asm-xtensa/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/include/asm-xtensa/div64.h b/include/asm-xtensa/div64.h deleted file mode 100644 index f35678cb0a9..00000000000 --- a/include/asm-xtensa/div64.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/div64.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_DIV64_H -#define _XTENSA_DIV64_H - -#include <asm-generic/div64.h> - -#endif /* _XTENSA_DIV64_H */ diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h deleted file mode 100644 index 51882ae3db4..00000000000 --- a/include/asm-xtensa/dma-mapping.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * include/asm-xtensa/dma-mapping.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_DMA_MAPPING_H -#define _XTENSA_DMA_MAPPING_H - -#include <asm/cache.h> -#include <asm/io.h> -#include <linux/mm.h> -#include <linux/scatterlist.h> - -/* - * DMA-consistent mapping functions. - */ - -extern void *consistent_alloc(int, size_t, dma_addr_t, unsigned long); -extern void consistent_free(void*, size_t, dma_addr_t); -extern void consistent_sync(void*, size_t, int); - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -static inline dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - consistent_sync(ptr, size, direction); - return virt_to_phys(ptr); -} - -static inline void -dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++ ) { - BUG_ON(!sg_page(sg)); - - sg->dma_address = sg_phys(sg); - consistent_sync(sg_virt(sg), sg->length, direction); - } - - return nents; -} - -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - return (dma_addr_t)(page_to_pfn(page)) * PAGE_SIZE + offset; -} - -static inline void -dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - - -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - consistent_sync((void *)bus_to_virt(dma_handle), size, direction); -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - consistent_sync((void *)bus_to_virt(dma_handle), size, direction); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - - consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction); -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - - consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction); -} -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - int i; - for (i = 0; i < nelems; i++, sg++) - consistent_sync(sg_virt(sg), sg->length, dir); -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - int i; - for (i = 0; i < nelems; i++, sg++) - consistent_sync(sg_virt(sg), sg->length, dir); -} -static inline int -dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -static inline int -dma_supported(struct device *dev, u64 mask) -{ - return 1; -} - -static inline int -dma_set_mask(struct device *dev, u64 mask) -{ - if(!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline int -dma_get_cache_alignment(void) -{ - return L1_CACHE_BYTES; -} - -#define dma_is_consistent(d, h) (1) - -static inline void -dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - consistent_sync(vaddr, size, direction); -} - -#endif /* _XTENSA_DMA_MAPPING_H */ diff --git a/include/asm-xtensa/dma.h b/include/asm-xtensa/dma.h deleted file mode 100644 index e30f3abf48f..00000000000 --- a/include/asm-xtensa/dma.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-xtensa/dma.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_DMA_H -#define _XTENSA_DMA_H - -#include <asm/io.h> /* need byte IO */ - -/* - * This is only to be defined if we have PC-like DMA. - * By default this is not true on an Xtensa processor, - * however on boards with a PCI bus, such functionality - * might be emulated externally. - * - * NOTE: there still exists driver code that assumes - * this is defined, eg. drivers/sound/soundcard.c (as of 2.4). - */ -#define MAX_DMA_CHANNELS 8 - -/* - * The maximum virtual address to which DMA transfers - * can be performed on this platform. - * - * NOTE: This is board (platform) specific, not processor-specific! - * - * NOTE: This assumes DMA transfers can only be performed on - * the section of physical memory contiguously mapped in virtual - * space for the kernel. For the Xtensa architecture, this - * means the maximum possible size of this DMA area is - * the size of the statically mapped kernel segment - * (XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB. - * - * NOTE: When the entire KSEG area is DMA capable, we substract - * one from the max address so that the virt_to_phys() macro - * works correctly on the address (otherwise the address - * enters another area, and virt_to_phys() may not return - * the value desired). - */ - -#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1) - - -/* Reserve and release a DMA channel */ -extern int request_dma(unsigned int dmanr, const char * device_id); -extern void free_dma(unsigned int dmanr); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - - -#endif diff --git a/include/asm-xtensa/elf.h b/include/asm-xtensa/elf.h deleted file mode 100644 index c3f53e755ca..00000000000 --- a/include/asm-xtensa/elf.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * include/asm-xtensa/elf.h - * - * ELF register definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ELF_H -#define _XTENSA_ELF_H - -#include <asm/ptrace.h> - -/* Xtensa processor ELF architecture-magic number */ - -#define EM_XTENSA 94 -#define EM_XTENSA_OLD 0xABC7 - -/* Xtensa relocations defined by the ABIs */ - -#define R_XTENSA_NONE 0 -#define R_XTENSA_32 1 -#define R_XTENSA_RTLD 2 -#define R_XTENSA_GLOB_DAT 3 -#define R_XTENSA_JMP_SLOT 4 -#define R_XTENSA_RELATIVE 5 -#define R_XTENSA_PLT 6 -#define R_XTENSA_OP0 8 -#define R_XTENSA_OP1 9 -#define R_XTENSA_OP2 10 -#define R_XTENSA_ASM_EXPAND 11 -#define R_XTENSA_ASM_SIMPLIFY 12 -#define R_XTENSA_GNU_VTINHERIT 15 -#define R_XTENSA_GNU_VTENTRY 16 -#define R_XTENSA_DIFF8 17 -#define R_XTENSA_DIFF16 18 -#define R_XTENSA_DIFF32 19 -#define R_XTENSA_SLOT0_OP 20 -#define R_XTENSA_SLOT1_OP 21 -#define R_XTENSA_SLOT2_OP 22 -#define R_XTENSA_SLOT3_OP 23 -#define R_XTENSA_SLOT4_OP 24 -#define R_XTENSA_SLOT5_OP 25 -#define R_XTENSA_SLOT6_OP 26 -#define R_XTENSA_SLOT7_OP 27 -#define R_XTENSA_SLOT8_OP 28 -#define R_XTENSA_SLOT9_OP 29 -#define R_XTENSA_SLOT10_OP 30 -#define R_XTENSA_SLOT11_OP 31 -#define R_XTENSA_SLOT12_OP 32 -#define R_XTENSA_SLOT13_OP 33 -#define R_XTENSA_SLOT14_OP 34 -#define R_XTENSA_SLOT0_ALT 35 -#define R_XTENSA_SLOT1_ALT 36 -#define R_XTENSA_SLOT2_ALT 37 -#define R_XTENSA_SLOT3_ALT 38 -#define R_XTENSA_SLOT4_ALT 39 -#define R_XTENSA_SLOT5_ALT 40 -#define R_XTENSA_SLOT6_ALT 41 -#define R_XTENSA_SLOT7_ALT 42 -#define R_XTENSA_SLOT8_ALT 43 -#define R_XTENSA_SLOT9_ALT 44 -#define R_XTENSA_SLOT10_ALT 45 -#define R_XTENSA_SLOT11_ALT 46 -#define R_XTENSA_SLOT12_ALT 47 -#define R_XTENSA_SLOT13_ALT 48 -#define R_XTENSA_SLOT14_ALT 49 - -/* ELF register definitions. This is needed for core dump support. */ - -typedef unsigned long elf_greg_t; - -typedef struct { - elf_greg_t pc; - elf_greg_t ps; - elf_greg_t lbeg; - elf_greg_t lend; - elf_greg_t lcount; - elf_greg_t sar; - elf_greg_t windowstart; - elf_greg_t windowbase; - elf_greg_t reserved[8+48]; - elf_greg_t a[64]; -} xtensa_gregset_t; - -#define ELF_NGREG (sizeof(xtensa_gregset_t) / sizeof(elf_greg_t)) - -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -#define ELF_NFPREG 18 - -typedef unsigned int elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -#define ELF_CORE_COPY_REGS(_eregs, _pregs) \ - xtensa_elf_core_copy_regs ((xtensa_gregset_t*)&(_eregs), _pregs); - -extern void xtensa_elf_core_copy_regs (xtensa_gregset_t *, struct pt_regs *); - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ - -#define elf_check_arch(x) ( ( (x)->e_machine == EM_XTENSA ) || \ - ( (x)->e_machine == EM_XTENSA_OLD ) ) - -/* - * These are used to set parameters in the core dumps. - */ - -#ifdef __XTENSA_EL__ -# define ELF_DATA ELFDATA2LSB -#elif defined(__XTENSA_EB__) -# define ELF_DATA ELFDATA2MSB -#else -# error processor byte order undefined! -#endif - -#define ELF_CLASS ELFCLASS32 -#define ELF_ARCH EM_XTENSA - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* - * This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ - -#define ELF_HWCAP (0) - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * For the moment, we have only optimizations for the Intel generations, - * but that could change... - */ - -#define ELF_PLATFORM (NULL) - -/* - * The Xtensa processor ABI says that when the program starts, a2 - * contains a pointer to a function which might be registered using - * `atexit'. This provides a mean for the dynamic linker to call - * DT_FINI functions for shared libraries that have been loaded before - * the code runs. - * - * A value of 0 tells we have no such handler. - * - * We might as well make sure everything else is cleared too (except - * for the stack pointer in a1), just to make things more - * deterministic. Also, clearing a0 terminates debugger backtraces. - */ - -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \ - _r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \ - _r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \ - _r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \ - } while (0) - -typedef struct { - xtregs_opt_t opt; - xtregs_user_t user; -#if XTENSA_HAVE_COPROCESSORS - xtregs_cp0_t cp0; - xtregs_cp1_t cp1; - xtregs_cp2_t cp2; - xtregs_cp3_t cp3; - xtregs_cp4_t cp4; - xtregs_cp5_t cp5; - xtregs_cp6_t cp6; - xtregs_cp7_t cp7; -#endif -} elf_xtregs_t; - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT) - -struct task_struct; - -extern void do_copy_regs (xtensa_gregset_t*, struct pt_regs*, - struct task_struct*); -extern void do_restore_regs (xtensa_gregset_t*, struct pt_regs*, - struct task_struct*); -extern void do_save_fpregs (elf_fpregset_t*, struct pt_regs*, - struct task_struct*); -extern int do_restore_fpregs (elf_fpregset_t*, struct pt_regs*, - struct task_struct*); - -#endif /* _XTENSA_ELF_H */ diff --git a/include/asm-xtensa/emergency-restart.h b/include/asm-xtensa/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-xtensa/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-xtensa/errno.h b/include/asm-xtensa/errno.h deleted file mode 100644 index a0f3b96b79b..00000000000 --- a/include/asm-xtensa/errno.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/errno.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ERRNO_H -#define _XTENSA_ERRNO_H - -#include <asm-generic/errno.h> - -#endif /* _XTENSA_ERRNO_H */ diff --git a/include/asm-xtensa/fb.h b/include/asm-xtensa/fb.h deleted file mode 100644 index c7df3803099..00000000000 --- a/include/asm-xtensa/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-xtensa/fcntl.h b/include/asm-xtensa/fcntl.h deleted file mode 100644 index 46ab12db573..00000000000 --- a/include/asm-xtensa/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/fcntl.h> diff --git a/include/asm-xtensa/futex.h b/include/asm-xtensa/futex.h deleted file mode 100644 index 0b745828f42..00000000000 --- a/include/asm-xtensa/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/futex.h> diff --git a/include/asm-xtensa/hardirq.h b/include/asm-xtensa/hardirq.h deleted file mode 100644 index 87cb19d1b10..00000000000 --- a/include/asm-xtensa/hardirq.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-xtensa/hardirq.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HARDIRQ_H -#define _XTENSA_HARDIRQ_H - -#include <linux/cache.h> -#include <asm/irq.h> - -/* headers.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; - unsigned int __syscall_count; - struct task_struct * __ksoftirqd_task; /* waitqueue is too large */ - unsigned int __nmi_count; /* arch dependent */ -} ____cacheline_aligned irq_cpustat_t; - -void ack_bad_irq(unsigned int irq); -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#endif /* _XTENSA_HARDIRQ_H */ diff --git a/include/asm-xtensa/highmem.h b/include/asm-xtensa/highmem.h deleted file mode 100644 index 0a046ca5a68..00000000000 --- a/include/asm-xtensa/highmem.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/highmem.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HIGHMEM_H -#define _XTENSA_HIGHMEM_H - -extern void flush_cache_kmaps(void); - -#endif - diff --git a/include/asm-xtensa/hw_irq.h b/include/asm-xtensa/hw_irq.h deleted file mode 100644 index 3ddbea759b2..00000000000 --- a/include/asm-xtensa/hw_irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-xtensa/hw_irq.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HW_IRQ_H -#define _XTENSA_HW_IRQ_H - -#endif diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h deleted file mode 100644 index 07b7299dab2..00000000000 --- a/include/asm-xtensa/io.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * include/asm-xtensa/io.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_IO_H -#define _XTENSA_IO_H - -#ifdef __KERNEL__ -#include <asm/byteorder.h> -#include <asm/page.h> -#include <linux/kernel.h> - -#include <linux/types.h> - -#define XCHAL_KIO_CACHED_VADDR 0xe0000000 -#define XCHAL_KIO_BYPASS_VADDR 0xf0000000 -#define XCHAL_KIO_PADDR 0xf0000000 -#define XCHAL_KIO_SIZE 0x10000000 - -#define IOADDR(x) (XCHAL_KIO_BYPASS_VADDR + (x)) - -/* - * swap functions to change byte order from little-endian to big-endian and - * vice versa. - */ - -static inline unsigned short _swapw (unsigned short v) -{ - return (v << 8) | (v >> 8); -} - -static inline unsigned int _swapl (unsigned int v) -{ - return (v << 24) | ((v & 0xff00) << 8) | ((v >> 8) & 0xff00) | (v >> 24); -} - -/* - * Change virtual addresses to physical addresses and vv. - * These are trivial on the 1:1 Linux/Xtensa mapping - */ - -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa(address); -} - -static inline void * phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* - * virt_to_bus and bus_to_virt are deprecated. - */ - -#define virt_to_bus(x) virt_to_phys(x) -#define bus_to_virt(x) phys_to_virt(x) - -/* - * Return the virtual (cached) address for the specified bus memory. - * Note that we currently don't support any address outside the KIO segment. - */ - -static inline void *ioremap(unsigned long offset, unsigned long size) -{ - if (offset >= XCHAL_KIO_PADDR - && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) - return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR); - - else - BUG(); -} - -static inline void *ioremap_nocache(unsigned long offset, unsigned long size) -{ - if (offset >= XCHAL_KIO_PADDR - && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) - return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR); - else - BUG(); -} - -static inline void iounmap(void *addr) -{ -} - -/* - * Generic I/O - */ - -#define readb(addr) \ - ({ unsigned char __v = (*(volatile unsigned char *)(addr)); __v; }) -#define readw(addr) \ - ({ unsigned short __v = (*(volatile unsigned short *)(addr)); __v; }) -#define readl(addr) \ - ({ unsigned int __v = (*(volatile unsigned int *)(addr)); __v; }) -#define writeb(b, addr) (void)((*(volatile unsigned char *)(addr)) = (b)) -#define writew(b, addr) (void)((*(volatile unsigned short *)(addr)) = (b)) -#define writel(b, addr) (void)((*(volatile unsigned int *)(addr)) = (b)) - -static inline __u8 __raw_readb(const volatile void __iomem *addr) -{ - return *(__force volatile __u8 *)(addr); -} -static inline __u16 __raw_readw(const volatile void __iomem *addr) -{ - return *(__force volatile __u16 *)(addr); -} -static inline __u32 __raw_readl(const volatile void __iomem *addr) -{ - return *(__force volatile __u32 *)(addr); -} -static inline void __raw_writeb(__u8 b, volatile void __iomem *addr) -{ - *(__force volatile __u8 *)(addr) = b; -} -static inline void __raw_writew(__u16 b, volatile void __iomem *addr) -{ - *(__force volatile __u16 *)(addr) = b; -} -static inline void __raw_writel(__u32 b, volatile void __iomem *addr) -{ - *(__force volatile __u32 *)(addr) = b; -} - -/* These are the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl, the "string" versions - * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions - * inb_p/inw_p/... - * The macros don't do byte-swapping. - */ - -#define inb(port) readb((u8 *)((port))) -#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) -#define outw(val, port) writew((val),(u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) -#define outl(val, port) writel((val),(u32 *)((unsigned long)(port))) - -#define inb_p(port) inb((port)) -#define outb_p(val, port) outb((val), (port)) -#define inw_p(port) inw((port)) -#define outw_p(val, port) outw((val), (port)) -#define inl_p(port) inl((port)) -#define outl_p(val, port) outl((val), (port)) - -extern void insb (unsigned long port, void *dst, unsigned long count); -extern void insw (unsigned long port, void *dst, unsigned long count); -extern void insl (unsigned long port, void *dst, unsigned long count); -extern void outsb (unsigned long port, const void *src, unsigned long count); -extern void outsw (unsigned long port, const void *src, unsigned long count); -extern void outsl (unsigned long port, const void *src, unsigned long count); - -#define IO_SPACE_LIMIT ~0 - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -/* At this point the Xtensa doesn't provide byte swap instructions */ - -#ifdef __XTENSA_EB__ -# define in_8(addr) (*(u8*)(addr)) -# define in_le16(addr) _swapw(*(u16*)(addr)) -# define in_le32(addr) _swapl(*(u32*)(addr)) -# define out_8(b, addr) *(u8*)(addr) = (b) -# define out_le16(b, addr) *(u16*)(addr) = _swapw(b) -# define out_le32(b, addr) *(u32*)(addr) = _swapl(b) -#elif defined(__XTENSA_EL__) -# define in_8(addr) (*(u8*)(addr)) -# define in_le16(addr) (*(u16*)(addr)) -# define in_le32(addr) (*(u32*)(addr)) -# define out_8(b, addr) *(u8*)(addr) = (b) -# define out_le16(b, addr) *(u16*)(addr) = (b) -# define out_le32(b, addr) *(u32*)(addr) = (b) -#else -# error processor byte order undefined! -#endif - - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - - -#endif /* __KERNEL__ */ - -#endif /* _XTENSA_IO_H */ diff --git a/include/asm-xtensa/ioctl.h b/include/asm-xtensa/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-xtensa/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/include/asm-xtensa/ioctls.h b/include/asm-xtensa/ioctls.h deleted file mode 100644 index 0ffa942954b..00000000000 --- a/include/asm-xtensa/ioctls.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * include/asm-xtensa/ioctls.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - * - * Derived from "include/asm-i386/ioctls.h" - */ - -#ifndef _XTENSA_IOCTLS_H -#define _XTENSA_IOCTLS_H - -#include <asm/ioctl.h> - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) -#define TIOCNXCL _IO('T', 13) -#define TIOCSCTTY _IO('T', 14) - -#define TIOCSTI _IOW('T', 18, char) -#define TIOCMGET _IOR('T', 21, unsigned int) -#define TIOCMBIS _IOW('T', 22, unsigned int) -#define TIOCMBIC _IOW('T', 23, unsigned int) -#define TIOCMSET _IOW('T', 24, unsigned int) -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) -#define TIOCLINUX _IOW('T', 28, char) -#define TIOCCONS _IO('T', 29) -#define TIOCGSERIAL _IOR('T', 30, struct serial_struct) -#define TIOCSSERIAL _IOW('T', 31, struct serial_struct) -#define TIOCPKT _IOW('T', 32, int) -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY _IO('T', 34) -#define TIOCSETD _IOW('T', 35, int) -#define TIOCGETD _IOR('T', 36, int) -#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ -#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ -#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define TIOCSERCONFIG _IO('T', 83) -#define TIOCSERGWILD _IOR('T', 84, int) -#define TIOCSERSWILD _IOW('T', 85, int) -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ -#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* _XTENSA_IOCTLS_H */ diff --git a/include/asm-xtensa/ipcbuf.h b/include/asm-xtensa/ipcbuf.h deleted file mode 100644 index c33aa6a4214..00000000000 --- a/include/asm-xtensa/ipcbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-xtensa/ipcbuf.h - * - * The ipc64_perm structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_IPCBUF_H -#define _XTENSA_IPCBUF_H - -/* - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned long seq; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _XTENSA_IPCBUF_H */ diff --git a/include/asm-xtensa/irq.h b/include/asm-xtensa/irq.h deleted file mode 100644 index fc73b7f11af..00000000000 --- a/include/asm-xtensa/irq.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-xtensa/irq.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_IRQ_H -#define _XTENSA_IRQ_H - -#include <asm/platform/hardware.h> -#include <asm/variant/core.h> - -#ifndef PLATFORM_NR_IRQS -# define PLATFORM_NR_IRQS 0 -#endif -#define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS -#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS) - -static __inline__ int irq_canonicalize(int irq) -{ - return (irq); -} - -struct irqaction; - -#endif /* _XTENSA_IRQ_H */ diff --git a/include/asm-xtensa/irq_regs.h b/include/asm-xtensa/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-xtensa/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/include/asm-xtensa/kdebug.h b/include/asm-xtensa/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-xtensa/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/include/asm-xtensa/kmap_types.h b/include/asm-xtensa/kmap_types.h deleted file mode 100644 index 9e822d2e3bc..00000000000 --- a/include/asm-xtensa/kmap_types.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-xtensa/kmap_types.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_KMAP_TYPES_H -#define _XTENSA_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif /* _XTENSA_KMAP_TYPES_H */ diff --git a/include/asm-xtensa/linkage.h b/include/asm-xtensa/linkage.h deleted file mode 100644 index bf2128a99d7..00000000000 --- a/include/asm-xtensa/linkage.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/linkage.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_LINKAGE_H -#define _XTENSA_LINKAGE_H - -/* Nothing to do here ... */ - -#endif /* _XTENSA_LINKAGE_H */ diff --git a/include/asm-xtensa/local.h b/include/asm-xtensa/local.h deleted file mode 100644 index 48723e550d1..00000000000 --- a/include/asm-xtensa/local.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/local.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_LOCAL_H -#define _XTENSA_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* _XTENSA_LOCAL_H */ diff --git a/include/asm-xtensa/mman.h b/include/asm-xtensa/mman.h deleted file mode 100644 index 9b92620c8a1..00000000000 --- a/include/asm-xtensa/mman.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * include/asm-xtensa/mman.h - * - * Xtensa Processor memory-manager definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MMAN_H -#define _XTENSA_MMAN_H - -/* - * Protections are chosen from these bits, OR'd together. The - * implementation does not necessarily support PROT_EXEC or PROT_WRITE - * without PROT_READ. The only guarantees are that no writing will be - * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. - */ - -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ - -#define PROT_SEM 0x10 /* page may be used for atomic ops */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ - -/* - * Flags for mmap - */ -#define MAP_SHARED 0x001 /* Share changes */ -#define MAP_PRIVATE 0x002 /* Changes are private */ -#define MAP_TYPE 0x00f /* Mask for type of mapping */ -#define MAP_FIXED 0x010 /* Interpret addr exactly */ - -/* not used by linux, but here to make sure we don't clash with ABI defines */ -#define MAP_RENAME 0x020 /* Assign page to file */ -#define MAP_AUTOGROW 0x040 /* File may grow by writing */ -#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ -#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ - -/* These are linux-specific */ -#define MAP_NORESERVE 0x0400 /* don't check for reservations */ -#define MAP_ANONYMOUS 0x0800 /* don't use a file */ -#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ -#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ -#define MAP_LOCKED 0x8000 /* pages are locked */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ - -/* - * Flags for msync - */ -#define MS_ASYNC 0x0001 /* sync memory asynchronously */ -#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ -#define MS_SYNC 0x0004 /* synchronous memory sync */ - -/* - * Flags for mlockall - */ -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ - -/* common parameters: try to keep these consistent across architectures */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -/* compatibility flags */ -#define MAP_FILE 0 - -#endif /* _XTENSA_MMAN_H */ diff --git a/include/asm-xtensa/mmu.h b/include/asm-xtensa/mmu.h deleted file mode 100644 index 44c5bb04c55..00000000000 --- a/include/asm-xtensa/mmu.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/mmu.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MMU_H -#define _XTENSA_MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#endif /* _XTENSA_MMU_H */ diff --git a/include/asm-xtensa/mmu_context.h b/include/asm-xtensa/mmu_context.h deleted file mode 100644 index c0fd8e5b451..00000000000 --- a/include/asm-xtensa/mmu_context.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * include/asm-xtensa/mmu_context.h - * - * Switch an MMU context. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MMU_CONTEXT_H -#define _XTENSA_MMU_CONTEXT_H - -#include <linux/stringify.h> -#include <linux/sched.h> - -#include <asm/pgtable.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <asm-generic/mm_hooks.h> - -#define XCHAL_MMU_ASID_BITS 8 - -#if (XCHAL_HAVE_TLBS != 1) -# error "Linux must have an MMU!" -#endif - -extern unsigned long asid_cache; - -/* - * NO_CONTEXT is the invalid ASID value that we don't ever assign to - * any user or kernel context. - * - * 0 invalid - * 1 kernel - * 2 reserved - * 3 reserved - * 4...255 available - */ - -#define NO_CONTEXT 0 -#define ASID_USER_FIRST 4 -#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) -#define ASID_INSERT(x) (0x03020001 | (((x) & ASID_MASK) << 8)) - -static inline void set_rasid_register (unsigned long val) -{ - __asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t" - " isync\n" : : "a" (val)); -} - -static inline unsigned long get_rasid_register (void) -{ - unsigned long tmp; - __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp)); - return tmp; -} - -static inline void -__get_new_mmu_context(struct mm_struct *mm) -{ - extern void flush_tlb_all(void); - if (! (++asid_cache & ASID_MASK) ) { - flush_tlb_all(); /* start new asid cycle */ - asid_cache += ASID_USER_FIRST; - } - mm->context = asid_cache; -} - -static inline void -__load_mmu_context(struct mm_struct *mm) -{ - set_rasid_register(ASID_INSERT(mm->context)); - invalidate_page_directory(); -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ - -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - mm->context = NO_CONTEXT; - return 0; -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void -activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - /* Unconditionally get a new ASID. */ - - __get_new_mmu_context(next); - __load_mmu_context(next); -} - - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned long asid = asid_cache; - - /* Check if our ASID is of an older version and thus invalid */ - - if (next->context == NO_CONTEXT || ((next->context^asid) & ~ASID_MASK)) - __get_new_mmu_context(next); - - __load_mmu_context(next); -} - -#define deactivate_mm(tsk, mm) do { } while(0) - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - invalidate_page_directory(); -} - - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ - /* Nothing to do. */ - -} - -#endif /* _XTENSA_MMU_CONTEXT_H */ diff --git a/include/asm-xtensa/module.h b/include/asm-xtensa/module.h deleted file mode 100644 index d9b34bee4d4..00000000000 --- a/include/asm-xtensa/module.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-xtensa/module.h - * - * This file contains the module code specific to the Xtensa architecture. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MODULE_H -#define _XTENSA_MODULE_H - -struct mod_arch_specific -{ - /* No special elements, yet. */ -}; - -#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " " - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#endif /* _XTENSA_MODULE_H */ diff --git a/include/asm-xtensa/msgbuf.h b/include/asm-xtensa/msgbuf.h deleted file mode 100644 index 693c9675528..00000000000 --- a/include/asm-xtensa/msgbuf.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-xtensa/msgbuf.h - * - * The msqid64_ds structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef _XTENSA_MSGBUF_H -#define _XTENSA_MSGBUF_H - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifdef __XTENSA_EB__ - unsigned int __unused1; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused2; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused3; - __kernel_time_t msg_ctime; /* last change time */ -#elif defined(__XTENSA_EL__) - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned int __unused3; -#else -# error processor byte order undefined! -#endif - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_MSGBUF_H */ diff --git a/include/asm-xtensa/mutex.h b/include/asm-xtensa/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-xtensa/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h deleted file mode 100644 index 11f7dc2dbec..00000000000 --- a/include/asm-xtensa/page.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * include/asm-xtensa/page.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version2 as - * published by the Free Software Foundation. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_PAGE_H -#define _XTENSA_PAGE_H - -#include <asm/processor.h> -#include <asm/types.h> -#include <asm/cache.h> - -/* - * Fixed TLB translations in the processor. - */ - -#define XCHAL_KSEG_CACHED_VADDR 0xd0000000 -#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000 -#define XCHAL_KSEG_PADDR 0x00000000 -#define XCHAL_KSEG_SIZE 0x08000000 - -/* - * PAGE_SHIFT determines the page size - */ - -#define PAGE_SHIFT 12 -#define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR -#define MAX_MEM_PFN XCHAL_KSEG_SIZE -#define PGTABLE_START 0x80000000 - -/* - * Cache aliasing: - * - * If the cache size for one way is greater than the page size, we have to - * deal with cache aliasing. The cache index is wider than the page size: - * - * | |cache| cache index - * | pfn |off| virtual address - * |xxxx:X|zzz| - * | : | | - * | \ / | | - * |trans.| | - * | / \ | | - * |yyyy:Y|zzz| physical address - * - * When the page number is translated to the physical page address, the lowest - * bit(s) (X) that are part of the cache index are also translated (Y). - * If this translation changes bit(s) (X), the cache index is also afected, - * thus resulting in a different cache line than before. - * The kernel does not provide a mechanism to ensure that the page color - * (represented by this bit) remains the same when allocated or when pages - * are remapped. When user pages are mapped into kernel space, the color of - * the page might also change. - * - * We use the address space VMALLOC_END ... VMALLOC_END + DCACHE_WAY_SIZE * 2 - * to temporarily map a patch so we can match the color. - */ - -#if DCACHE_WAY_SIZE > PAGE_SIZE -# define DCACHE_ALIAS_ORDER (DCACHE_WAY_SHIFT - PAGE_SHIFT) -# define DCACHE_ALIAS_MASK (PAGE_MASK & (DCACHE_WAY_SIZE - 1)) -# define DCACHE_ALIAS(a) (((a) & DCACHE_ALIAS_MASK) >> PAGE_SHIFT) -# define DCACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & DCACHE_ALIAS_MASK) == 0) -#else -# define DCACHE_ALIAS_ORDER 0 -#endif - -#if ICACHE_WAY_SIZE > PAGE_SIZE -# define ICACHE_ALIAS_ORDER (ICACHE_WAY_SHIFT - PAGE_SHIFT) -# define ICACHE_ALIAS_MASK (PAGE_MASK & (ICACHE_WAY_SIZE - 1)) -# define ICACHE_ALIAS(a) (((a) & ICACHE_ALIAS_MASK) >> PAGE_SHIFT) -# define ICACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & ICACHE_ALIAS_MASK) == 0) -#else -# define ICACHE_ALIAS_ORDER 0 -#endif - - -#ifdef __ASSEMBLY__ - -#define __pgprot(x) (x) - -#else - -/* - * These are used to make use of C type-checking.. - */ - -typedef struct { unsigned long pte; } pte_t; /* page table entry */ -typedef struct { unsigned long pgd; } pgd_t; /* PGD table entry */ -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* - * Pure 2^n version of get_order - * Use 'nsau' instructions if supported by the processor or the generic version. - */ - -#if XCHAL_HAVE_NSA - -static inline __attribute_const__ int get_order(unsigned long size) -{ - int lz; - asm ("nsau %0, %1" : "=r" (lz) : "r" ((size - 1) >> PAGE_SHIFT)); - return 32 - lz; -} - -#else - -# include <asm-generic/page.h> - -#endif - -struct page; -extern void clear_page(void *page); -extern void copy_page(void *to, void *from); - -/* - * If we have cache aliasing and writeback caches, we might have to do - * some extra work - */ - -#if DCACHE_WAY_SIZE > PAGE_SIZE -extern void clear_user_page(void*, unsigned long, struct page*); -extern void copy_user_page(void*, void*, unsigned long, struct page*); -#else -# define clear_user_page(page, vaddr, pg) clear_page(page) -# define copy_user_page(to, from, vaddr, pg) copy_page(to, from) -#endif - -/* - * This handles the memory map. We handle pages at - * XCHAL_KSEG_CACHED_VADDR for kernels with 32 bit address space. - * These macros are for conversion of kernel address, not user - * addresses. - */ - -#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) -#define pfn_valid(pfn) ((unsigned long)pfn < max_mapnr) -#ifdef CONFIG_DISCONTIGMEM -# error CONFIG_DISCONTIGMEM not supported -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#define WANT_PAGE_VIRTUAL - - -#endif /* __ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include <asm-generic/memory_model.h> -#endif /* _XTENSA_PAGE_H */ diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h deleted file mode 100644 index ba03d5aeab6..00000000000 --- a/include/asm-xtensa/param.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-xtensa/param.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PARAM_H -#define _XTENSA_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* internal timer frequency */ -# define USER_HZ 100 /* for user interfaces in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NGROUPS -#define NGROUPS 32 -#endif - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _XTENSA_PARAM_H */ diff --git a/include/asm-xtensa/pci-bridge.h b/include/asm-xtensa/pci-bridge.h deleted file mode 100644 index 00fcbd7c534..00000000000 --- a/include/asm-xtensa/pci-bridge.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * include/asm-xtensa/pci-bridge.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PCI_BRIDGE_H -#define _XTENSA_PCI_BRIDGE_H - -#ifdef __KERNEL__ - -struct device_node; -struct pci_controller; - -/* - * pciauto_bus_scan() enumerates the pci space. - */ - -extern int pciauto_bus_scan(struct pci_controller *, int); - -struct pci_space { - unsigned long start; - unsigned long end; - unsigned long base; -}; - -/* - * Structure of a PCI controller (host bridge) - */ - -struct pci_controller { - int index; /* used for pci_controller_num */ - struct pci_controller *next; - struct pci_bus *bus; - void *arch_data; - - int first_busno; - int last_busno; - - struct pci_ops *ops; - volatile unsigned int *cfg_addr; - volatile unsigned char *cfg_data; - - /* Currently, we limit ourselves to 1 IO range and 3 mem - * ranges since the common pci_bus structure can't handle more - */ - struct resource io_resource; - struct resource mem_resources[3]; - int mem_resource_count; - - /* Host bridge I/O and Memory space - * Used for BAR placement algorithms - */ - struct pci_space io_space; - struct pci_space mem_space; - - /* Return the interrupt number fo a device. */ - int (*map_irq)(struct pci_dev*, u8, u8); - -}; - -static inline void pcibios_init_resource(struct resource *res, - unsigned long start, unsigned long end, int flags, char *name) -{ - res->start = start; - res->end = end; - res->flags = flags; - res->name = name; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; -} - - -/* These are used for config access before all the PCI probing has been done. */ -int early_read_config_byte(struct pci_controller*, int, int, int, u8*); -int early_read_config_word(struct pci_controller*, int, int, int, u16*); -int early_read_config_dword(struct pci_controller*, int, int, int, u32*); -int early_write_config_byte(struct pci_controller*, int, int, int, u8); -int early_write_config_word(struct pci_controller*, int, int, int, u16); -int early_write_config_dword(struct pci_controller*, int, int, int, u32); - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_PCI_BRIDGE_H */ diff --git a/include/asm-xtensa/pci.h b/include/asm-xtensa/pci.h deleted file mode 100644 index 66410acf18b..00000000000 --- a/include/asm-xtensa/pci.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/include/asm-xtensa/pci.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PCI_H -#define _XTENSA_PCI_H - -#ifdef __KERNEL__ - -/* Can be used to override the logic in pci_scan_bus for skipping - * already-configured bus numbers - to be used for buggy BIOSes - * or architectures with incomplete PCI setup by the loader - */ - -#define pcibios_assign_all_busses() 0 - -extern struct pci_controller* pcibios_alloc_controller(void); - -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* Assume some values. (We should revise them, if necessary) */ - -#define PCIBIOS_MIN_IO 0x2000 -#define PCIBIOS_MIN_MEM 0x10000000 - -/* Dynamic DMA mapping stuff. - * Xtensa has everything mapped statically like x86. - */ - -#include <linux/types.h> -#include <linux/slab.h> -#include <asm/scatterlist.h> -#include <linux/string.h> -#include <asm/io.h> - -struct pci_dev; - -/* The PCI address space does equal the physical memory address space. - * The networking and block device layers use this boolean for bounce buffer - * decisions. - */ - -#define PCI_DMA_BUS_IS_PHYS (1) - -/* pci_unmap_{page,single} is a no-op, so */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_ubnmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -/* Map a range of PCI memory or I/O space for a device into user space */ -int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ -#define HAVE_PCI_MMAP 1 - -#endif /* __KERNEL__ */ - -/* Implement the pci_ DMA API in terms of the generic device dma_ one */ -#include <asm-generic/pci-dma-compat.h> - -/* Generic PCI */ -#include <asm-generic/pci.h> - -#endif /* _XTENSA_PCI_H */ diff --git a/include/asm-xtensa/percpu.h b/include/asm-xtensa/percpu.h deleted file mode 100644 index 6d2bc2ada9d..00000000000 --- a/include/asm-xtensa/percpu.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-xtensa/percpu.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PERCPU__ -#define _XTENSA_PERCPU__ - -#include <asm-generic/percpu.h> - -#endif /* _XTENSA_PERCPU__ */ diff --git a/include/asm-xtensa/pgalloc.h b/include/asm-xtensa/pgalloc.h deleted file mode 100644 index 4f4a7987ede..00000000000 --- a/include/asm-xtensa/pgalloc.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-xtensa/pgalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Copyright (C) 2001-2007 Tensilica Inc. - */ - -#ifndef _XTENSA_PGALLOC_H -#define _XTENSA_PGALLOC_H - -#ifdef __KERNEL__ - -#include <linux/highmem.h> - -/* - * Allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_populate_kernel(mm, pmdp, ptep) \ - (pmd_val(*(pmdp)) = ((unsigned long)ptep)) -#define pmd_populate(mm, pmdp, page) \ - (pmd_val(*(pmdp)) = ((unsigned long)page_to_virt(page))) -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline pgd_t* -pgd_alloc(struct mm_struct *mm) -{ - return (pgd_t*) __get_free_pages(GFP_KERNEL | __GFP_ZERO, PGD_ORDER); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_page((unsigned long)pgd); -} - -/* Use a slab cache for the pte pages (see also sparc64 implementation) */ - -extern struct kmem_cache *pgtable_cache; - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long addr) -{ - struct page *page; - - page = virt_to_page(pte_alloc_one_kernel(mm, addr)); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - kmem_cache_free(pgtable_cache, pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - kmem_cache_free(pgtable_cache, page_address(pte)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_PGALLOC_H */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h deleted file mode 100644 index 8014d96b21f..00000000000 --- a/include/asm-xtensa/pgtable.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * include/asm-xtensa/pgtable.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_PGTABLE_H -#define _XTENSA_PGTABLE_H - -#include <asm-generic/pgtable-nopmd.h> -#include <asm/page.h> - -/* - * We only use two ring levels, user and kernel space. - */ - -#define USER_RING 1 /* user ring level */ -#define KERNEL_RING 0 /* kernel ring level */ - -/* - * The Xtensa architecture port of Linux has a two-level page table system, - * i.e. the logical three-level Linux page table layout is folded. - * Each task has the following memory page tables: - * - * PGD table (page directory), ie. 3rd-level page table: - * One page (4 kB) of 1024 (PTRS_PER_PGD) pointers to PTE tables - * (Architectures that don't have the PMD folded point to the PMD tables) - * - * The pointer to the PGD table for a given task can be retrieved from - * the task structure (struct task_struct*) t, e.g. current(): - * (t->mm ? t->mm : t->active_mm)->pgd - * - * PMD tables (page middle-directory), ie. 2nd-level page tables: - * Absent for the Xtensa architecture (folded, PTRS_PER_PMD == 1). - * - * PTE tables (page table entry), ie. 1st-level page tables: - * One page (4 kB) of 1024 (PTRS_PER_PTE) PTEs with a special PTE - * invalid_pte_table for absent mappings. - * - * The individual pages are 4 kB big with special pages for the empty_zero_page. - */ - -#define PGDIR_SHIFT 22 -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * Entries per page directory level: we use two-level, so - * we don't really have any PMD directory physically. - */ -#define PTRS_PER_PTE 1024 -#define PTRS_PER_PTE_SHIFT 10 -#define PTRS_PER_PGD 1024 -#define PGD_ORDER 0 -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 -#define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) - -/* - * Virtual memory area. We keep a distance to other memory regions to be - * on the safe side. We also use this area for cache aliasing. - */ - -#define VMALLOC_START 0xC0000000 -#define VMALLOC_END 0xC7FEFFFF -#define TLBTEMP_BASE_1 0xC7FF0000 -#define TLBTEMP_BASE_2 0xC7FF8000 - -/* - * Xtensa Linux config PTE layout (when present): - * 31-12: PPN - * 11-6: Software - * 5-4: RING - * 3-0: CA - * - * Similar to the Alpha and MIPS ports, we need to keep track of the ref - * and mod bits in software. We have a software "you can read - * from this page" bit, and a hardware one which actually lets the - * process read from the page. On the same token we have a software - * writable bit and the real hardware one which actually lets the - * process write to the page. - * - * See further below for PTE layout for swapped-out pages. - */ - -#define _PAGE_HW_EXEC (1<<0) /* hardware: page is executable */ -#define _PAGE_HW_WRITE (1<<1) /* hardware: page is writable */ - -#define _PAGE_FILE (1<<1) /* non-linear mapping, if !present */ -#define _PAGE_PROTNONE (3<<0) /* special case for VM_PROT_NONE */ - -/* None of these cache modes include MP coherency: */ -#define _PAGE_CA_BYPASS (0<<2) /* bypass, non-speculative */ -#define _PAGE_CA_WB (1<<2) /* write-back */ -#define _PAGE_CA_WT (2<<2) /* write-through */ -#define _PAGE_CA_MASK (3<<2) -#define _PAGE_INVALID (3<<2) - -#define _PAGE_USER (1<<4) /* user access (ring=1) */ - -/* Software */ -#define _PAGE_WRITABLE_BIT 6 -#define _PAGE_WRITABLE (1<<6) /* software: page writable */ -#define _PAGE_DIRTY (1<<7) /* software: page dirty */ -#define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */ - -/* On older HW revisions, we always have to set bit 0 */ -#if XCHAL_HW_VERSION_MAJOR < 2000 -# define _PAGE_VALID (1<<0) -#else -# define _PAGE_VALID 0 -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_PRESENT (_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED) - -#ifdef CONFIG_MMU - -#define PAGE_NONE __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER) -#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER) -#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE) -#define PAGE_SHARED_EXEC \ - __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE | _PAGE_HW_EXEC) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_HW_WRITE) -#define PAGE_KERNEL_EXEC __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC) - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) -# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED) -#else -# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB) -#endif - -#else /* no mmu */ - -# define PAGE_NONE __pgprot(0) -# define PAGE_SHARED __pgprot(0) -# define PAGE_COPY __pgprot(0) -# define PAGE_READONLY __pgprot(0) -# define PAGE_KERNEL __pgprot(0) - -#endif - -/* - * On certain configurations of Xtensa MMUs (eg. the initial Linux config), - * the MMU can't do page protection for execute, and considers that the same as - * read. Also, write permissions may imply read permissions. - * What follows is the closest we can get by reasonable means.. - * See linux/mm/mmap.c for protection_map[] array that uses these definitions. - */ -#define __P000 PAGE_NONE /* private --- */ -#define __P001 PAGE_READONLY /* private --r */ -#define __P010 PAGE_COPY /* private -w- */ -#define __P011 PAGE_COPY /* private -wr */ -#define __P100 PAGE_READONLY_EXEC /* private x-- */ -#define __P101 PAGE_READONLY_EXEC /* private x-r */ -#define __P110 PAGE_COPY_EXEC /* private xw- */ -#define __P111 PAGE_COPY_EXEC /* private xwr */ - -#define __S000 PAGE_NONE /* shared --- */ -#define __S001 PAGE_READONLY /* shared --r */ -#define __S010 PAGE_SHARED /* shared -w- */ -#define __S011 PAGE_SHARED /* shared -wr */ -#define __S100 PAGE_READONLY_EXEC /* shared x-- */ -#define __S101 PAGE_READONLY_EXEC /* shared x-r */ -#define __S110 PAGE_SHARED_EXEC /* shared xw- */ -#define __S111 PAGE_SHARED_EXEC /* shared xwr */ - -#ifndef __ASSEMBLY__ - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd entry %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -extern unsigned long empty_zero_page[1024]; - -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)]; - -/* - * The pmd contains the kernel virtual address of the pte page. - */ -#define pmd_page_vaddr(pmd) ((unsigned long)(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) virt_to_page(pmd_val(pmd)) - -/* - * pte status. - */ -#define pte_none(pte) (pte_val(pte) == _PAGE_INVALID) -#define pte_present(pte) \ - (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID) \ - || ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE)) -#define pte_clear(mm,addr,ptep) \ - do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK) -#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) -#define pmd_clear(pmdp) do { set_pmd(pmdp, __pmd(0)); } while (0) - -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITABLE; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) - { pte_val(pte) &= ~(_PAGE_WRITABLE | _PAGE_HW_WRITE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) - { pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HW_WRITE); return pte; } -static inline pte_t pte_mkold(pte_t pte) - { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) - { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) - { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) - { pte_val(pte) |= _PAGE_WRITABLE; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) - { return pte; } - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pte_same(a,b) (pte_val(a) == pte_val(b)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); -} - -/* - * Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -static inline void update_pte(pte_t *ptep, pte_t pteval) -{ - *ptep = pteval; -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK - __asm__ __volatile__ ("dhwb %0, 0" :: "a" (ptep)); -#endif - -} - -struct mm_struct; - -static inline void -set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) -{ - update_pte(ptep, pteval); -} - - -static inline void -set_pmd(pmd_t *pmdp, pmd_t pmdval) -{ - *pmdp = pmdval; -} - -struct vm_area_struct; - -static inline int -ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - pte_t pte = *ptep; - if (!pte_young(pte)) - return 0; - update_pte(ptep, pte_mkold(pte)); - return 1; -} - -static inline pte_t -ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - pte_clear(mm, addr, ptep); - return pte; -} - -static inline void -ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - update_pte(ptep, pte_wrprotect(pte)); -} - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* to find an entry in a page-table-directory */ -#define pgd_offset(mm,address) ((mm)->pgd + pgd_index(address)) - -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir,address) ((pmd_t*)(dir)) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir,addr) \ - ((pte_t*) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr)) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir),(addr)) - -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - - -/* - * Encode and decode a swap entry. - * - * Format of swap pte: - * bit 0 MBZ - * bit 1 page-file (must be zero) - * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) - * bits 4 - 5 ring protection (must be 01: _PAGE_USER) - * bits 6 - 10 swap type (5 bits -> 32 types) - * bits 11 - 31 swap offset / PAGE_SIZE (21 bits -> 8GB) - - * Format of file pte: - * bit 0 MBZ - * bit 1 page-file (must be one: _PAGE_FILE) - * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) - * bits 4 - 5 ring protection (must be 01: _PAGE_USER) - * bits 6 - 31 file offset / PAGE_SIZE - */ - -#define __swp_type(entry) (((entry).val >> 6) & 0x1f) -#define __swp_offset(entry) ((entry).val >> 11) -#define __swp_entry(type,offs) \ - ((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID}) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#define PTE_FILE_MAX_BITS 28 -#define pte_to_pgoff(pte) (pte_val(pte) >> 4) -#define pgoff_to_pte(off) \ - ((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE }) - -#endif /* !defined (__ASSEMBLY__) */ - - -#ifdef __ASSEMBLY__ - -/* Assembly macro _PGD_INDEX is the same as C pgd_index(unsigned long), - * _PGD_OFFSET as C pgd_offset(struct mm_struct*, unsigned long), - * _PMD_OFFSET as C pmd_offset(pgd_t*, unsigned long) - * _PTE_OFFSET as C pte_offset(pmd_t*, unsigned long) - * - * Note: We require an additional temporary register which can be the same as - * the register that holds the address. - * - * ((pte_t*) ((unsigned long)(pmd_val(*pmd) & PAGE_MASK)) + pte_index(addr)) - * - */ -#define _PGD_INDEX(rt,rs) extui rt, rs, PGDIR_SHIFT, 32-PGDIR_SHIFT -#define _PTE_INDEX(rt,rs) extui rt, rs, PAGE_SHIFT, PTRS_PER_PTE_SHIFT - -#define _PGD_OFFSET(mm,adr,tmp) l32i mm, mm, MM_PGD; \ - _PGD_INDEX(tmp, adr); \ - addx4 mm, tmp, mm - -#define _PTE_OFFSET(pmd,adr,tmp) _PTE_INDEX(tmp, adr); \ - srli pmd, pmd, PAGE_SHIFT; \ - slli pmd, pmd, PAGE_SHIFT; \ - addx4 pmd, tmp, pmd - -#else - -extern void paging_init(void); - -#define kern_addr_valid(addr) (1) - -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); - -/* - * remap a physical page `pfn' of size `size' with page protection `prot' - * into virtual address `from' - */ - -#define io_remap_pfn_range(vma,from,pfn,size,prot) \ - remap_pfn_range(vma, from, pfn, size, prot) - - -extern void pgtable_cache_init(void); - -typedef pte_t *pte_addr_t; - -#endif /* !defined (__ASSEMBLY__) */ - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTEP_MKDIRTY -#define __HAVE_ARCH_PTE_SAME - -#include <asm-generic/pgtable.h> - -#endif /* _XTENSA_PGTABLE_H */ diff --git a/include/asm-xtensa/platform-iss/hardware.h b/include/asm-xtensa/platform-iss/hardware.h deleted file mode 100644 index 6930c12adc1..00000000000 --- a/include/asm-xtensa/platform-iss/hardware.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * include/asm-xtensa/platform-iss/hardware.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 Tensilica Inc. - */ - -/* - * This file contains the default configuration of ISS. - */ - -#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H -#define _XTENSA_PLATFORM_ISS_HARDWARE_H - -/* - * Memory configuration. - */ - -#define PLATFORM_DEFAULT_MEM_START 0x00000000 -#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 - -/* - * Interrupt configuration. - */ - -#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */ diff --git a/include/asm-xtensa/platform-iss/simcall.h b/include/asm-xtensa/platform-iss/simcall.h deleted file mode 100644 index b7952c06a2b..00000000000 --- a/include/asm-xtensa/platform-iss/simcall.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-xtensa/platform-iss/simcall.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 Tensilica Inc. - */ - -#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H -#define _XTENSA_PLATFORM_ISS_SIMCALL_H - - -/* - * System call like services offered by the simulator host. - */ - -#define SYS_nop 0 /* unused */ -#define SYS_exit 1 /*x*/ -#define SYS_fork 2 -#define SYS_read 3 /*x*/ -#define SYS_write 4 /*x*/ -#define SYS_open 5 /*x*/ -#define SYS_close 6 /*x*/ -#define SYS_rename 7 /*x 38 - waitpid */ -#define SYS_creat 8 /*x*/ -#define SYS_link 9 /*x (not implemented on WIN32) */ -#define SYS_unlink 10 /*x*/ -#define SYS_execv 11 /* n/a - execve */ -#define SYS_execve 12 /* 11 - chdir */ -#define SYS_pipe 13 /* 42 - time */ -#define SYS_stat 14 /* 106 - mknod */ -#define SYS_chmod 15 -#define SYS_chown 16 /* 202 - lchown */ -#define SYS_utime 17 /* 30 - break */ -#define SYS_wait 18 /* n/a - oldstat */ -#define SYS_lseek 19 /*x*/ -#define SYS_getpid 20 -#define SYS_isatty 21 /* n/a - mount */ -#define SYS_fstat 22 /* 108 - oldumount */ -#define SYS_time 23 /* 13 - setuid */ -#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ -#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ -#define SYS_socket 26 -#define SYS_sendto 27 -#define SYS_recvfrom 28 -#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ -#define SYS_bind 30 -#define SYS_ioctl 31 - -/* - * SYS_select_one specifiers - */ - -#define XTISS_SELECT_ONE_READ 1 -#define XTISS_SELECT_ONE_WRITE 2 -#define XTISS_SELECT_ONE_EXCEPT 3 - - -#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */ - diff --git a/include/asm-xtensa/platform.h b/include/asm-xtensa/platform.h deleted file mode 100644 index 48135a9718b..00000000000 --- a/include/asm-xtensa/platform.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * include/asm-xtensa/platform.h - * - * Platform specific functions - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PLATFORM_H -#define _XTENSA_PLATFORM_H - -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/bootparam.h> - -/* - * platform_init is called before the mmu is initialized to give the - * platform a early hook-up. bp_tag_t is a list of configuration tags - * passed from the boot-loader. - */ -extern void platform_init(bp_tag_t*); - -/* - * platform_setup is called from setup_arch with a pointer to the command-line - * string. - */ -extern void platform_setup (char **); - -/* - * platform_init_irq is called from init_IRQ. - */ -extern void platform_init_irq (void); - -/* - * platform_restart is called to restart the system. - */ -extern void platform_restart (void); - -/* - * platform_halt is called to stop the system and halt. - */ -extern void platform_halt (void); - -/* - * platform_power_off is called to stop the system and power it off. - */ -extern void platform_power_off (void); - -/* - * platform_idle is called from the idle function. - */ -extern void platform_idle (void); - -/* - * platform_heartbeat is called every HZ - */ -extern void platform_heartbeat (void); - -/* - * platform_pcibios_init is called to allow the platform to setup the pci bus. - */ -extern void platform_pcibios_init (void); - -/* - * platform_pcibios_fixup allows to modify the PCI configuration. - */ -extern int platform_pcibios_fixup (void); - -/* - * platform_calibrate_ccount calibrates cpu clock freq (CONFIG_XTENSA_CALIBRATE) - */ -extern void platform_calibrate_ccount (void); - -/* - * platform_get_rtc_time returns RTC seconds (returns 0 for no error) - */ -extern int platform_get_rtc_time(time_t*); - -/* - * platform_set_rtc_time set RTC seconds (returns 0 for no error) - */ -extern int platform_set_rtc_time(time_t); - - -#endif /* _XTENSA_PLATFORM_H */ - diff --git a/include/asm-xtensa/poll.h b/include/asm-xtensa/poll.h deleted file mode 100644 index 9d2d5993f06..00000000000 --- a/include/asm-xtensa/poll.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-xtensa/poll.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POLL_H -#define _XTENSA_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 0x0100 -#define POLLREMOVE 0x0800 - -#include <asm-generic/poll.h> - -#endif /* _XTENSA_POLL_H */ diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h deleted file mode 100644 index 43f9dd1126a..00000000000 --- a/include/asm-xtensa/posix_types.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * include/asm-xtensa/posix_types.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Largely copied from include/asm-ppc/posix_types.h - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POSIX_TYPES_H -#define _XTENSA_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef unsigned long __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifndef __GNUC__ - -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) -#define __FD_ZERO(set) \ - ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) - -#else /* __GNUC__ */ - -#if defined(__KERNEL__) -/* With GNU C, use inline functions instead so args are evaluated only once: */ - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned int *tmp = (unsigned int *)p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 8: - tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0; - tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -#endif /* defined(__KERNEL__) */ -#endif /* __GNUC__ */ -#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h deleted file mode 100644 index 4918a4e96d4..00000000000 --- a/include/asm-xtensa/processor.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * include/asm-xtensa/processor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PROCESSOR_H -#define _XTENSA_PROCESSOR_H - -#include <asm/variant/core.h> -#include <asm/coprocessor.h> - -#include <linux/compiler.h> -#include <asm/ptrace.h> -#include <asm/types.h> -#include <asm/regs.h> - -/* Assertions. */ - -#if (XCHAL_HAVE_WINDOWED != 1) -# error Linux requires the Xtensa Windowed Registers Option. -#endif - -/* - * User space process size: 1 GB. - * Windowed call ABI requires caller and callee to be located within the same - * 1 GB region. The C compiler places trampoline code on the stack for sources - * that take the address of a nested C function (a feature used by glibc), so - * the 1 GB requirement applies to the stack as well. - */ - -#define TASK_SIZE __XTENSA_UL_CONST(0x40000000) -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* - * General exception cause assigned to debug exceptions. Debug exceptions go - * to their own vector, rather than the general exception vectors (user, - * kernel, double); and their specific causes are reported via DEBUGCAUSE - * rather than EXCCAUSE. However it is sometimes convenient to redirect debug - * exceptions to the general exception mechanism. To do this, an otherwise - * unused EXCCAUSE value was assigned to debug exceptions for this purpose. - */ - -#define EXCCAUSE_MAPPED_DEBUG 63 - -/* - * We use DEPC also as a flag to distinguish between double and regular - * exceptions. For performance reasons, DEPC might contain the value of - * EXCCAUSE for regular exceptions, so we use this definition to mark a - * valid double exception address. - * (Note: We use it in bgeui, so it should be 64, 128, or 256) - */ - -#define VALID_DOUBLE_EXCEPTION_ADDRESS 64 - -/* LOCKLEVEL defines the interrupt level that masks all - * general-purpose interrupts. - */ -#define LOCKLEVEL 1 - -/* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE - * registers - */ -#define WSBITS (XCHAL_NUM_AREGS / 4) /* width of WINDOWSTART in bits */ -#define WBBITS (XCHAL_NUM_AREGS_LOG2 - 2) /* width of WINDOWBASE in bits */ - -#ifndef __ASSEMBLY__ - -/* Build a valid return address for the specified call winsize. - * winsize must be 1 (call4), 2 (call8), or 3 (call12) - */ -#define MAKE_RA_FOR_CALL(ra,ws) (((ra) & 0x3fffffff) | (ws) << 30) - -/* Convert return address to a valid pc - * Note: We assume that the stack pointer is in the same 1GB ranges as the ra - */ -#define MAKE_PC_FROM_RA(ra,sp) (((ra) & 0x3fffffff) | ((sp) & 0xc0000000)) - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct thread_struct { - - /* kernel's return address and stack pointer for context switching */ - unsigned long ra; /* kernel's a0: return address and window call size */ - unsigned long sp; /* kernel's a1: stack pointer */ - - mm_segment_t current_ds; /* see uaccess.h for example uses */ - - /* struct xtensa_cpuinfo info; */ - - unsigned long bad_vaddr; /* last user fault */ - unsigned long bad_uaddr; /* last kernel fault accessing user space */ - unsigned long error_code; - - unsigned long ibreak[XCHAL_NUM_IBREAK]; - unsigned long dbreaka[XCHAL_NUM_DBREAK]; - unsigned long dbreakc[XCHAL_NUM_DBREAK]; - - /* Make structure 16 bytes aligned. */ - int align[0] __attribute__ ((aligned(16))); -}; - - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 2) - -#define INIT_THREAD \ -{ \ - ra: 0, \ - sp: sizeof(init_stack) + (long) &init_stack, \ - current_ds: {0}, \ - /*info: {0}, */ \ - bad_vaddr: 0, \ - bad_uaddr: 0, \ - error_code: 0, \ -} - - -/* - * Do necessary setup to start up a newly executed thread. - * Note: We set-up ps as if we did a call4 to the new pc. - * set_thread_state in signal.c depends on it. - */ -#define USER_PS_VALUE ((1 << PS_WOE_BIT) | \ - (1 << PS_CALLINC_SHIFT) | \ - (USER_RING << PS_RING_SHIFT) | \ - (1 << PS_UM_BIT) | \ - (1 << PS_EXCM_BIT)) - -/* Clearing a0 terminates the backtrace. */ -#define start_thread(regs, new_pc, new_sp) \ - regs->pc = new_pc; \ - regs->ps = USER_PS_VALUE; \ - regs->areg[1] = new_sp; \ - regs->areg[0] = 0; \ - regs->wmask = 1; \ - regs->depc = 0; \ - regs->windowbase = 0; \ - regs->windowstart = 1; - -/* Forward declaration */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -#define release_thread(thread) do { } while(0) - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct*); - -/* Create a kernel thread without removing it from tasklists */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while(0) -#define release_segments(mm) do { } while(0) -#define forget_segments() do { } while (0) - -#define thread_saved_pc(tsk) (task_pt_regs(tsk)->pc) - -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->areg[1]) - -#define cpu_relax() barrier() - -/* Special register access. */ - -#define WSR(v,sr) __asm__ __volatile__ ("wsr %0,"__stringify(sr) :: "a"(v)); -#define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); - -#define set_sr(x,sr) ({unsigned int v=(unsigned int)x; WSR(v,sr);}) -#define get_sr(sr) ({unsigned int v; RSR(v,sr); v; }) - -#endif /* __ASSEMBLY__ */ -#endif /* _XTENSA_PROCESSOR_H */ diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h deleted file mode 100644 index 089b0db4481..00000000000 --- a/include/asm-xtensa/ptrace.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * include/asm-xtensa/ptrace.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PTRACE_H -#define _XTENSA_PTRACE_H - -/* - * Kernel stack - * - * +-----------------------+ -------- STACK_SIZE - * | register file | | - * +-----------------------+ | - * | struct pt_regs | | - * +-----------------------+ | ------ PT_REGS_OFFSET - * double : 16 bytes spill area : | ^ - * excetion :- - - - - - - - - - - -: | | - * frame : struct pt_regs : | | - * :- - - - - - - - - - - -: | | - * | | | | - * | memory stack | | | - * | | | | - * ~ ~ ~ ~ - * ~ ~ ~ ~ - * | | | | - * | | | | - * +-----------------------+ | | --- STACK_BIAS - * | struct task_struct | | | ^ - * current --> +-----------------------+ | | | - * | struct thread_info | | | | - * +-----------------------+ -------- - */ - -#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) - -/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ - -#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ -#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ -#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ -#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ -#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ -#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ -#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ -#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ -#define EXC_TABLE_SIZE 0x400 - -/* Registers used by strace */ - -#define REG_A_BASE 0x0000 -#define REG_AR_BASE 0x0100 -#define REG_PC 0x0020 -#define REG_PS 0x02e6 -#define REG_WB 0x0248 -#define REG_WS 0x0249 -#define REG_LBEG 0x0200 -#define REG_LEND 0x0201 -#define REG_LCOUNT 0x0202 -#define REG_SAR 0x0203 - -#define SYSCALL_NR 0x00ff - -/* Other PTRACE_ values defined in <linux/ptrace.h> using values 0-9,16,17,24 */ - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETXTREGS 18 -#define PTRACE_SETXTREGS 19 - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long pc; /* 4 */ - unsigned long ps; /* 8 */ - unsigned long depc; /* 12 */ - unsigned long exccause; /* 16 */ - unsigned long excvaddr; /* 20 */ - unsigned long debugcause; /* 24 */ - unsigned long wmask; /* 28 */ - unsigned long lbeg; /* 32 */ - unsigned long lend; /* 36 */ - unsigned long lcount; /* 40 */ - unsigned long sar; /* 44 */ - unsigned long windowbase; /* 48 */ - unsigned long windowstart; /* 52 */ - unsigned long syscall; /* 56 */ - unsigned long icountlevel; /* 60 */ - int reserved[1]; /* 64 */ - - /* Additional configurable registers that are used by the compiler. */ - xtregs_opt_t xtregs_opt; - - /* Make sure the areg field is 16 bytes aligned. */ - int align[0] __attribute__ ((aligned(16))); - - /* current register frame. - * Note: The ESF for kernel exceptions ends after 16 registers! - */ - unsigned long areg[16]; /* 128 (64) */ -}; - -#include <asm/variant/core.h> - -# define task_pt_regs(tsk) ((struct pt_regs*) \ - (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1) -# define user_mode(regs) (((regs)->ps & 0x00000020)!=0) -# define instruction_pointer(regs) ((regs)->pc) -extern void show_regs(struct pt_regs *); - -# ifndef CONFIG_SMP -# define profile_pc(regs) instruction_pointer(regs) -# endif - -#else /* __ASSEMBLY__ */ - -# include <asm/asm-offsets.h> -#define PT_REGS_OFFSET (KERNEL_STACK_SIZE - PT_USER_SIZE) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _XTENSA_PTRACE_H */ diff --git a/include/asm-xtensa/regs.h b/include/asm-xtensa/regs.h deleted file mode 100644 index d4baed24692..00000000000 --- a/include/asm-xtensa/regs.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (c) 2006 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -#ifndef _XTENSA_REGS_H -#define _XTENSA_REGS_H - -/* Special registers. */ - -#define LBEG 0 -#define LEND 1 -#define LCOUNT 2 -#define SAR 3 -#define BR 4 -#define SCOMPARE1 12 -#define ACCHI 16 -#define ACCLO 17 -#define MR 32 -#define WINDOWBASE 72 -#define WINDOWSTART 73 -#define PTEVADDR 83 -#define RASID 90 -#define ITLBCFG 91 -#define DTLBCFG 92 -#define IBREAKENABLE 96 -#define DDR 104 -#define IBREAKA 128 -#define DBREAKA 144 -#define DBREAKC 160 -#define EPC 176 -#define EPC_1 177 -#define DEPC 192 -#define EPS 192 -#define EPS_1 193 -#define EXCSAVE 208 -#define EXCSAVE_1 209 -#define INTERRUPT 226 -#define INTENABLE 228 -#define PS 230 -#define THREADPTR 231 -#define EXCCAUSE 232 -#define DEBUGCAUSE 233 -#define CCOUNT 234 -#define PRID 235 -#define ICOUNT 236 -#define ICOUNTLEVEL 237 -#define EXCVADDR 238 -#define CCOMPARE 240 -#define MISC 244 - -/* Special names for read-only and write-only interrupt registers. */ - -#define INTREAD 226 -#define INTSET 226 -#define INTCLEAR 227 - -/* EXCCAUSE register fields */ - -#define EXCCAUSE_EXCCAUSE_SHIFT 0 -#define EXCCAUSE_EXCCAUSE_MASK 0x3F - -#define EXCCAUSE_ILLEGAL_INSTRUCTION 0 -#define EXCCAUSE_SYSTEM_CALL 1 -#define EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 -#define EXCCAUSE_LOAD_STORE_ERROR 3 -#define EXCCAUSE_LEVEL1_INTERRUPT 4 -#define EXCCAUSE_ALLOCA 5 -#define EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 -#define EXCCAUSE_SPECULATION 7 -#define EXCCAUSE_PRIVILEGED 8 -#define EXCCAUSE_UNALIGNED 9 -#define EXCCAUSE_ITLB_MISS 16 -#define EXCCAUSE_ITLB_MULTIHIT 17 -#define EXCCAUSE_ITLB_PRIVILEGE 18 -#define EXCCAUSE_ITLB_SIZE_RESTRICTION 19 -#define EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 -#define EXCCAUSE_DTLB_MISS 24 -#define EXCCAUSE_DTLB_MULTIHIT 25 -#define EXCCAUSE_DTLB_PRIVILEGE 26 -#define EXCCAUSE_DTLB_SIZE_RESTRICTION 27 -#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 -#define EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 -#define EXCCAUSE_COPROCESSOR0_DISABLED 32 -#define EXCCAUSE_COPROCESSOR1_DISABLED 33 -#define EXCCAUSE_COPROCESSOR2_DISABLED 34 -#define EXCCAUSE_COPROCESSOR3_DISABLED 35 -#define EXCCAUSE_COPROCESSOR4_DISABLED 36 -#define EXCCAUSE_COPROCESSOR5_DISABLED 37 -#define EXCCAUSE_COPROCESSOR6_DISABLED 38 -#define EXCCAUSE_COPROCESSOR7_DISABLED 39 - -/* PS register fields. */ - -#define PS_WOE_BIT 18 -#define PS_CALLINC_SHIFT 16 -#define PS_CALLINC_MASK 0x00030000 -#define PS_OWB_SHIFT 8 -#define PS_OWB_MASK 0x00000F00 -#define PS_RING_SHIFT 6 -#define PS_RING_MASK 0x000000C0 -#define PS_UM_BIT 5 -#define PS_EXCM_BIT 4 -#define PS_INTLEVEL_SHIFT 0 -#define PS_INTLEVEL_MASK 0x0000000F - -/* DBREAKCn register fields. */ - -#define DBREAKC_MASK_BIT 0 -#define DBREAKC_MASK_MASK 0x0000003F -#define DBREAKC_LOAD_BIT 30 -#define DBREAKC_LOAD_MASK 0x40000000 -#define DBREAKC_STOR_BIT 31 -#define DBREAKC_STOR_MASK 0x80000000 - -/* DEBUGCAUSE register fields. */ - -#define DEBUGCAUSE_DEBUGINT_BIT 5 /* External debug interrupt */ -#define DEBUGCAUSE_BREAKN_BIT 4 /* BREAK.N instruction */ -#define DEBUGCAUSE_BREAK_BIT 3 /* BREAK instruction */ -#define DEBUGCAUSE_DBREAK_BIT 2 /* DBREAK match */ -#define DEBUGCAUSE_IBREAK_BIT 1 /* IBREAK match */ -#define DEBUGCAUSE_ICOUNT_BIT 0 /* ICOUNT would incr. to zero */ - -#endif /* _XTENSA_SPECREG_H */ - diff --git a/include/asm-xtensa/resource.h b/include/asm-xtensa/resource.h deleted file mode 100644 index 17b5ab31177..00000000000 --- a/include/asm-xtensa/resource.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/resource.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RESOURCE_H -#define _XTENSA_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif /* _XTENSA_RESOURCE_H */ diff --git a/include/asm-xtensa/rmap.h b/include/asm-xtensa/rmap.h deleted file mode 100644 index 649588b7e9a..00000000000 --- a/include/asm-xtensa/rmap.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/rmap.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RMAP_H -#define _XTENSA_RMAP_H - -#include <asm-generic/rmap.h> - -#endif diff --git a/include/asm-xtensa/rwsem.h b/include/asm-xtensa/rwsem.h deleted file mode 100644 index e39edf5c86f..00000000000 --- a/include/asm-xtensa/rwsem.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * include/asm-xtensa/rwsem.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Largely copied from include/asm-ppc/rwsem.h - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RWSEM_H -#define _XTENSA_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead." -#endif - -#include <linux/list.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> -#include <asm/system.h> - -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -}; - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (atomic_add_return(1,(atomic_t *)(&sem->count)) > 0) - smp_wmb(); - else - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - smp_wmb(); - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (tmp == RWSEM_ACTIVE_WRITE_BIAS) - smp_wmb(); - else - rwsem_down_write_failed(sem); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - smp_wmb(); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_sub_return(1,(atomic_t *)(&sem->count)); - if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - smp_wmb(); - if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - smp_mb(); - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* _XTENSA_RWSEM_H */ diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h deleted file mode 100644 index 810080bb0a2..00000000000 --- a/include/asm-xtensa/scatterlist.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-xtensa/scatterlist.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SCATTERLIST_H -#define _XTENSA_SCATTERLIST_H - -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - - -#define ISA_DMA_THRESHOLD (~0UL) - -#endif /* _XTENSA_SCATTERLIST_H */ diff --git a/include/asm-xtensa/sections.h b/include/asm-xtensa/sections.h deleted file mode 100644 index 40b5191b55a..00000000000 --- a/include/asm-xtensa/sections.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/sections.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SECTIONS_H -#define _XTENSA_SECTIONS_H - -#include <asm-generic/sections.h> - -#endif /* _XTENSA_SECTIONS_H */ diff --git a/include/asm-xtensa/segment.h b/include/asm-xtensa/segment.h deleted file mode 100644 index a2eb547a1a7..00000000000 --- a/include/asm-xtensa/segment.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/segment.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SEGMENT_H -#define _XTENSA_SEGMENT_H - -#include <asm/uaccess.h> - -#endif /* _XTENSA_SEGEMENT_H */ diff --git a/include/asm-xtensa/sembuf.h b/include/asm-xtensa/sembuf.h deleted file mode 100644 index c15870493b3..00000000000 --- a/include/asm-xtensa/sembuf.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-xtensa/sembuf.h - * - * The semid64_ds structure for Xtensa architecture. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - */ - -#ifndef _XTENSA_SEMBUF_H -#define _XTENSA_SEMBUF_H - -#include <asm/byteorder.h> - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifdef __XTENSA_EL__ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; -#else - unsigned long __unused1; - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused2; - __kernel_time_t sem_ctime; /* last change time */ -#endif - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/include/asm-xtensa/serial.h b/include/asm-xtensa/serial.h deleted file mode 100644 index ec04114fcf0..00000000000 --- a/include/asm-xtensa/serial.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/serial.h - * - * Configuration details for 8250, 16450, 16550, etc. serial ports - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SERIAL_H -#define _XTENSA_SERIAL_H - -#include <asm/platform/serial.h> - -#endif /* _XTENSA_SERIAL_H */ diff --git a/include/asm-xtensa/setup.h b/include/asm-xtensa/setup.h deleted file mode 100644 index e3636520d8c..00000000000 --- a/include/asm-xtensa/setup.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/setup.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SETUP_H -#define _XTENSA_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#endif diff --git a/include/asm-xtensa/shmbuf.h b/include/asm-xtensa/shmbuf.h deleted file mode 100644 index ad4b0121782..00000000000 --- a/include/asm-xtensa/shmbuf.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-xtensa/shmbuf.h - * - * The shmid64_ds structure for Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SHMBUF_H -#define _XTENSA_SHMBUF_H - -#if defined (__XTENSA_EL__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#elif defined (__XTENSA_EB__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#else -# error endian order not defined -#endif - - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _XTENSA_SHMBUF_H */ diff --git a/include/asm-xtensa/shmparam.h b/include/asm-xtensa/shmparam.h deleted file mode 100644 index c8cc16c3da9..00000000000 --- a/include/asm-xtensa/shmparam.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-xtensa/shmparam.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef _XTENSA_SHMPARAM_H -#define _XTENSA_SHMPARAM_H - -/* - * Xtensa can have variable size caches, and if - * the size of single way is larger than the page size, - * then we have to start worrying about cache aliasing - * problems. - */ - -#define SHMLBA ((PAGE_SIZE > DCACHE_WAY_SIZE)? PAGE_SIZE : DCACHE_WAY_SIZE) - -#endif /* _XTENSA_SHMPARAM_H */ diff --git a/include/asm-xtensa/sigcontext.h b/include/asm-xtensa/sigcontext.h deleted file mode 100644 index 03383af8c3b..00000000000 --- a/include/asm-xtensa/sigcontext.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-xtensa/sigcontext.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGCONTEXT_H -#define _XTENSA_SIGCONTEXT_H - - -struct sigcontext { - unsigned long sc_pc; - unsigned long sc_ps; - unsigned long sc_lbeg; - unsigned long sc_lend; - unsigned long sc_lcount; - unsigned long sc_sar; - unsigned long sc_acclo; - unsigned long sc_acchi; - unsigned long sc_a[16]; - void *sc_xtregs; -}; - -#endif /* _XTENSA_SIGCONTEXT_H */ diff --git a/include/asm-xtensa/siginfo.h b/include/asm-xtensa/siginfo.h deleted file mode 100644 index 6916248295d..00000000000 --- a/include/asm-xtensa/siginfo.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/siginfo.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGINFO_H -#define _XTENSA_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif /* _XTENSA_SIGINFO_H */ diff --git a/include/asm-xtensa/signal.h b/include/asm-xtensa/signal.h deleted file mode 100644 index 633ba73bc4d..00000000000 --- a/include/asm-xtensa/signal.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * include/asm-xtensa/signal.h - * - * Swiped from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGNAL_H -#define _XTENSA_SIGNAL_H - - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; -typedef unsigned long old_sigset_t; /* at least 32 bits */ -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#endif - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* #define SIGLOST 29 */ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#ifndef __ASSEMBLY__ - -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -#else - -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include <asm/sigcontext.h> -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _XTENSA_SIGNAL_H */ diff --git a/include/asm-xtensa/smp.h b/include/asm-xtensa/smp.h deleted file mode 100644 index 83c569e3bdb..00000000000 --- a/include/asm-xtensa/smp.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-xtensa/smp.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SMP_H -#define _XTENSA_SMP_H - -extern struct xtensa_cpuinfo boot_cpu_data; - -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data - -struct xtensa_cpuinfo { - unsigned long *pgd_cache; - unsigned long *pte_cache; - unsigned long pgtable_cache_sz; -}; - -#define cpu_logical_map(cpu) (cpu) - -#endif /* _XTENSA_SMP_H */ diff --git a/include/asm-xtensa/socket.h b/include/asm-xtensa/socket.h deleted file mode 100644 index 6100682b1da..00000000000 --- a/include/asm-xtensa/socket.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/asm-xtensa/socket.h - * - * Copied from i386. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _XTENSA_SOCKET_H -#define _XTENSA_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ - -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ - -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _XTENSA_SOCKET_H */ diff --git a/include/asm-xtensa/sockios.h b/include/asm-xtensa/sockios.h deleted file mode 100644 index efe0af379f0..00000000000 --- a/include/asm-xtensa/sockios.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-xtensa/sockios.h - * - * Socket-level I/O control calls. Copied from MIPS. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 Tensilica Inc. - */ - -#ifndef _XTENSA_SOCKIOS_H -#define _XTENSA_SOCKIOS_H - -#include <asm/ioctl.h> - -/* Socket-level I/O control calls. */ - -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _XTENSA_SOCKIOS_H */ diff --git a/include/asm-xtensa/spinlock.h b/include/asm-xtensa/spinlock.h deleted file mode 100644 index 8ff23649581..00000000000 --- a/include/asm-xtensa/spinlock.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/spinlock.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SPINLOCK_H -#define _XTENSA_SPINLOCK_H - -#include <linux/spinlock.h> - -#endif /* _XTENSA_SPINLOCK_H */ diff --git a/include/asm-xtensa/stat.h b/include/asm-xtensa/stat.h deleted file mode 100644 index c4992038cee..00000000000 --- a/include/asm-xtensa/stat.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * include/asm-xtensa/stat.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_STAT_H -#define _XTENSA_STAT_H - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device */ - unsigned long long st_ino; /* File serial number */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - long long st_size; /* Size of file, in bytes. */ - unsigned long st_blksize; /* Optimal block size for I/O. */ - unsigned long __unused2; - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - unsigned long st_mtime; /* Time of last modification. */ - unsigned long st_mtime_nsec; - unsigned long st_ctime; /* Time of last status change. */ - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_STAT_H */ diff --git a/include/asm-xtensa/statfs.h b/include/asm-xtensa/statfs.h deleted file mode 100644 index 9c3d1a21313..00000000000 --- a/include/asm-xtensa/statfs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/statfs.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_STATFS_H -#define _XTENSA_STATFS_H - -#include <asm-generic/statfs.h> - -#endif /* _XTENSA_STATFS_H */ - diff --git a/include/asm-xtensa/string.h b/include/asm-xtensa/string.h deleted file mode 100644 index 5fb8c27cbef..00000000000 --- a/include/asm-xtensa/string.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * include/asm-xtensa/string.h - * - * These trivial string functions are considered part of the public domain. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -/* We should optimize these. See arch/xtensa/lib/strncpy_user.S */ - -#ifndef _XTENSA_STRING_H -#define _XTENSA_STRING_H - -#define __HAVE_ARCH_STRCPY -static inline char *strcpy(char *__dest, const char *__src) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - __asm__ __volatile__("1:\n\t" - "l8ui %2, %1, 0\n\t" - "s8i %2, %0, 0\n\t" - "addi %1, %1, 1\n\t" - "addi %0, %0, 1\n\t" - "bnez %2, 1b\n\t" - : "=r" (__dest), "=r" (__src), "=&r" (__dummy) - : "0" (__dest), "1" (__src) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *__dest, const char *__src, size_t __n) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - "1:\n\t" - "l8ui %2, %1, 0\n\t" - "s8i %2, %0, 0\n\t" - "addi %1, %1, 1\n\t" - "addi %0, %0, 1\n\t" - "beqz %2, 2f\n\t" - "bne %1, %5, 1b\n" - "2:" - : "=r" (__dest), "=r" (__src), "=&r" (__dummy) - : "0" (__dest), "1" (__src), "r" (__src+__n) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *__cs, const char *__ct) -{ - register int __res; - unsigned long __dummy; - - __asm__ __volatile__( - "1:\n\t" - "l8ui %3, %1, 0\n\t" - "addi %1, %1, 1\n\t" - "l8ui %2, %0, 0\n\t" - "addi %0, %0, 1\n\t" - "beqz %2, 2f\n\t" - "beq %2, %3, 1b\n" - "2:\n\t" - "sub %2, %3, %2" - : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) - : "0" (__cs), "1" (__ct)); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char *__cs, const char *__ct, size_t __n) -{ - register int __res; - unsigned long __dummy; - - __asm__ __volatile__( - "mov %2, %3\n" - "1:\n\t" - "beq %0, %6, 2f\n\t" - "l8ui %3, %1, 0\n\t" - "addi %1, %1, 1\n\t" - "l8ui %2, %0, 0\n\t" - "addi %0, %0, 1\n\t" - "beqz %2, 2f\n\t" - "beqz %3, 2f\n\t" - "beq %2, %3, 1b\n" - "2:\n\t" - "sub %2, %3, %2" - : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) - : "0" (__cs), "1" (__ct), "r" (__cs+__n)); - - return __res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); - -/* Don't build bcopy at all ... */ -#define __HAVE_ARCH_BCOPY - -#define __HAVE_ARCH_MEMSCAN -#define memscan memchr - -#endif /* _XTENSA_STRING_H */ diff --git a/include/asm-xtensa/syscall.h b/include/asm-xtensa/syscall.h deleted file mode 100644 index 05cebf8f62b..00000000000 --- a/include/asm-xtensa/syscall.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-xtensa/syscall.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -struct pt_regs; -struct sigaction; -asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); -asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); -asmlinkage long xtensa_pipe(int __user *); -asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); -asmlinkage long xtensa_ptrace(long, long, long, long); -asmlinkage long xtensa_sigreturn(struct pt_regs*); -asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); -asmlinkage long xtensa_sigsuspend(struct pt_regs*); -asmlinkage long xtensa_rt_sigsuspend(struct pt_regs*); -asmlinkage long xtensa_sigaction(int, const struct old_sigaction*, - struct old_sigaction*); -asmlinkage long xtensa_sigaltstack(struct pt_regs *regs); -asmlinkage long sys_rt_sigaction(int, - const struct sigaction __user *, - struct sigaction __user *, - size_t); -asmlinkage long xtensa_shmat(int, char __user *, int); -asmlinkage long xtensa_fadvise64_64(int, int, - unsigned long long, unsigned long long); - -/* Should probably move to linux/syscalls.h */ -struct pollfd; -asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp, - fd_set __user *exp, struct timespec __user *tsp, void __user *sig); -asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds, - struct timespec __user *tsp, const sigset_t __user *sigmask, - size_t sigsetsize); - - diff --git a/include/asm-xtensa/system.h b/include/asm-xtensa/system.h deleted file mode 100644 index 62b1e8f3c13..00000000000 --- a/include/asm-xtensa/system.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * include/asm-xtensa/system.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SYSTEM_H -#define _XTENSA_SYSTEM_H - -#include <linux/stringify.h> - -#include <asm/processor.h> - -/* interrupt control */ - -#define local_save_flags(x) \ - __asm__ __volatile__ ("rsr %0,"__stringify(PS) : "=a" (x)); -#define local_irq_restore(x) do { \ - __asm__ __volatile__ ("wsr %0, "__stringify(PS)" ; rsync" \ - :: "a" (x) : "memory"); } while(0); -#define local_irq_save(x) do { \ - __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) \ - : "=a" (x) :: "memory");} while(0); - -static inline void local_irq_disable(void) -{ - unsigned long flags; - __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) - : "=a" (flags) :: "memory"); -} -static inline void local_irq_enable(void) -{ - unsigned long flags; - __asm__ __volatile__ ("rsil %0, 0" : "=a" (flags) :: "memory"); - -} - -static inline int irqs_disabled(void) -{ - unsigned long flags; - local_save_flags(flags); - return flags & 0xf; -} - - -#define smp_read_barrier_depends() do { } while(0) -#define read_barrier_depends() do { } while(0) - -#define mb() barrier() -#define rmb() mb() -#define wmb() mb() - -#ifdef CONFIG_SMP -#error smp_* not defined -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#if !defined (__ASSEMBLY__) - -/* * switch_to(n) should switch tasks to task nr n, first - * checking that n isn't the current task, in which case it does nothing. - */ -extern void *_switch_to(void *last, void *next); - -#endif /* __ASSEMBLY__ */ - -#define switch_to(prev,next,last) \ -do { \ - (last) = _switch_to(prev, next); \ -} while(0) - -/* - * cmpxchg - */ - -static inline unsigned long -__cmpxchg_u32(volatile int *p, int old, int new) -{ - __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %1, 0 \n\t" - "bne %0, %2, 1f \n\t" - "s32i %3, %1, 0 \n\t" - "1: \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n\t" - : "=&a" (old) - : "a" (p), "a" (old), "r" (new) - : "a15", "memory"); - return old; -} -/* This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). */ - -extern void __cmpxchg_called_with_bad_pointer(void); - -static __inline__ unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) -{ - switch (size) { - case 4: return __cmpxchg_u32(ptr, old, new); - default: __cmpxchg_called_with_bad_pointer(); - return old; - } -} - -#define cmpxchg(ptr,o,n) \ - ({ __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof (*(ptr))); \ - }) - -#include <asm-generic/cmpxchg-local.h> - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -/* - * xchg_u32 - * - * Note that a15 is used here because the register allocation - * done by the compiler is not guaranteed and a window overflow - * may not occur between the rsil and wsr instructions. By using - * a15 in the rsil, the machine is guaranteed to be in a state - * where no register reference will cause an overflow. - */ - -static inline unsigned long xchg_u32(volatile int * m, unsigned long val) -{ - unsigned long tmp; - __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" - "l32i %0, %1, 0 \n\t" - "s32i %2, %1, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" - "rsync \n\t" - : "=&a" (tmp) - : "a" (m), "a" (val) - : "a15", "memory"); - return tmp; -} - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -/* - * This only works if the compiler isn't horribly bad at optimizing. - * gcc-2.5.8 reportedly can't handle this, but I define that one to - * be dead anyway. - */ - -extern void __xchg_called_with_bad_pointer(void); - -static __inline__ unsigned long -__xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 4: - return xchg_u32(ptr, x); - } - __xchg_called_with_bad_pointer(); - return x; -} - -extern void set_except_vector(int n, void *addr); - -static inline void spill_registers(void) -{ - unsigned int a0, ps; - - __asm__ __volatile__ ( - "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t" - "mov a12, a0\n\t" - "rsr a13," __stringify(SAR) "\n\t" - "xsr a14," __stringify(PS) "\n\t" - "movi a0, _spill_registers\n\t" - "rsync\n\t" - "callx0 a0\n\t" - "mov a0, a12\n\t" - "wsr a13," __stringify(SAR) "\n\t" - "wsr a14," __stringify(PS) "\n\t" - :: "a" (&a0), "a" (&ps) - : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory"); -} - -#define arch_align_stack(x) (x) - -#endif /* _XTENSA_SYSTEM_H */ diff --git a/include/asm-xtensa/termbits.h b/include/asm-xtensa/termbits.h deleted file mode 100644 index 85aa6a3c0b6..00000000000 --- a/include/asm-xtensa/termbits.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * include/asm-xtensa/termbits.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TERMBITS_H -#define _XTENSA_TERMBITS_H - - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _XTENSA_TERMBITS_H */ diff --git a/include/asm-xtensa/termios.h b/include/asm-xtensa/termios.h deleted file mode 100644 index 4673f42f88a..00000000000 --- a/include/asm-xtensa/termios.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * include/asm-xtensa/termios.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TERMIOS_H -#define _XTENSA_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ - -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ - -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* _XTENSA_TERMIOS_H */ diff --git a/include/asm-xtensa/thread_info.h b/include/asm-xtensa/thread_info.h deleted file mode 100644 index 0f4fe1faf9b..00000000000 --- a/include/asm-xtensa/thread_info.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * include/asm-xtensa/thread_info.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_THREAD_INFO_H -#define _XTENSA_THREAD_INFO_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -# include <asm/processor.h> -#endif - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants - * must also be changed - */ - -#ifndef __ASSEMBLY__ - -#if XTENSA_HAVE_COPROCESSORS - -typedef struct xtregs_coprocessor { - xtregs_cp0_t cp0; - xtregs_cp1_t cp1; - xtregs_cp2_t cp2; - xtregs_cp3_t cp3; - xtregs_cp4_t cp4; - xtregs_cp5_t cp5; - xtregs_cp6_t cp6; - xtregs_cp7_t cp7; -} xtregs_coprocessor_t; - -#endif - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - __s32 preempt_count; /* 0 => preemptable,< 0 => BUG*/ - - mm_segment_t addr_limit; /* thread address space */ - struct restart_block restart_block; - - unsigned long cpenable; - - /* Allocate storage for extra user states and coprocessor states. */ -#if XTENSA_HAVE_COPROCESSORS - xtregs_coprocessor_t xtregs_cp; -#endif - xtregs_user_t xtregs_user; -}; - -#else /* !__ASSEMBLY__ */ - -/* offsets into the thread_info struct for assembly code access */ -#define TI_TASK 0x00000000 -#define TI_EXEC_DOMAIN 0x00000004 -#define TI_FLAGS 0x00000008 -#define TI_STATUS 0x0000000C -#define TI_CPU 0x00000010 -#define TI_PRE_COUNT 0x00000014 -#define TI_ADDR_LIMIT 0x00000018 -#define TI_RESTART_BLOCK 0x000001C - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ - -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__("extui %0,a1,0,13\n\t" - "xor %0, a1, %0" : "=&r" (ti) : ); - return ti; -} - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg,sp) \ - extui reg, sp, 0, 13; \ - xor reg, sp, reg -#endif - - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_MEMDIE 5 -#define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_FREEZE 17 /* is freezing for suspend */ - -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) -#define _TIF_IRET (1<<TIF_IRET) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_FREEZE (1<<TIF_FREEZE) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ -#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */ - -#define THREAD_SIZE 8192 //(2*PAGE_SIZE) -#define THREAD_SIZE_ORDER 1 - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_THREAD_INFO */ diff --git a/include/asm-xtensa/timex.h b/include/asm-xtensa/timex.h deleted file mode 100644 index b83a8181d44..00000000000 --- a/include/asm-xtensa/timex.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * include/asm-xtensa/timex.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TIMEX_H -#define _XTENSA_TIMEX_H - -#ifdef __KERNEL__ - -#include <asm/processor.h> -#include <linux/stringify.h> - -#define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL -#define INTLEVEL(x) _INTLEVEL(x) - -#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1 -# define LINUX_TIMER 0 -# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1 -# define LINUX_TIMER 1 -# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1 -# define LINUX_TIMER 2 -# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT -#else -# error "Bad timer number for Linux configurations!" -#endif - -#define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT) - -#define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */ -#define CLOCK_TICK_FACTOR 20 /* Factor of both 10^6 and CLOCK_TICK_RATE */ - -#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT -extern unsigned long ccount_per_jiffy; -extern unsigned long ccount_nsec; -#define CCOUNT_PER_JIFFY ccount_per_jiffy -#define NSEC_PER_CCOUNT ccount_nsec -#else -#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) -#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK) -#endif - - -typedef unsigned long long cycles_t; - -/* - * Only used for SMP. - */ - -extern cycles_t cacheflush_time; - -#define get_cycles() (0) - - -/* - * Register access. - */ - -#define WSR_CCOUNT(r) asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r)) -#define RSR_CCOUNT(r) asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r)) -#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r)) -#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r)) - -static inline unsigned long get_ccount (void) -{ - unsigned long ccount; - RSR_CCOUNT(ccount); - return ccount; -} - -static inline void set_ccount (unsigned long ccount) -{ - WSR_CCOUNT(ccount); -} - -static inline unsigned long get_linux_timer (void) -{ - unsigned ccompare; - RSR_CCOMPARE(LINUX_TIMER, ccompare); - return ccompare; -} - -static inline void set_linux_timer (unsigned long ccompare) -{ - WSR_CCOMPARE(LINUX_TIMER, ccompare); -} - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_TIMEX_H */ diff --git a/include/asm-xtensa/tlb.h b/include/asm-xtensa/tlb.h deleted file mode 100644 index 31c220faca0..00000000000 --- a/include/asm-xtensa/tlb.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-xtensa/tlb.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TLB_H -#define _XTENSA_TLB_H - -#include <asm/cache.h> -#include <asm/page.h> - -#if (DCACHE_WAY_SIZE <= PAGE_SIZE) - -/* Note, read http://lkml.org/lkml/2004/1/15/6 */ - -# define tlb_start_vma(tlb,vma) do { } while (0) -# define tlb_end_vma(tlb,vma) do { } while (0) - -#else - -# define tlb_start_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while(0) - -# define tlb_end_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ - } while(0) - -#endif - -#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0) -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include <asm-generic/tlb.h> - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) - -#endif /* _XTENSA_TLB_H */ diff --git a/include/asm-xtensa/tlbflush.h b/include/asm-xtensa/tlbflush.h deleted file mode 100644 index 46d240074f7..00000000000 --- a/include/asm-xtensa/tlbflush.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * include/asm-xtensa/tlbflush.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TLBFLUSH_H -#define _XTENSA_TLBFLUSH_H - -#ifdef __KERNEL__ - -#include <linux/stringify.h> -#include <asm/processor.h> - -#define DTLB_WAY_PGD 7 - -#define ITLB_ARF_WAYS 4 -#define DTLB_ARF_WAYS 4 - -#define ITLB_HIT_BIT 3 -#define DTLB_HIT_BIT 4 - -#ifndef __ASSEMBLY__ - -/* TLB flushing: - * - * - flush_tlb_all() flushes all processes TLB entries - * - flush_tlb_mm(mm) flushes the specified mm context TLB entries - * - flush_tlb_page(mm, vmaddr) flushes a single page - * - flush_tlb_range(mm, start, end) flushes a range of pages - */ - -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct*); -extern void flush_tlb_page(struct vm_area_struct*,unsigned long); -extern void flush_tlb_range(struct vm_area_struct*,unsigned long,unsigned long); - -#define flush_tlb_kernel_range(start,end) flush_tlb_all() - -/* TLB operations. */ - -static inline unsigned long itlb_probe(unsigned long addr) -{ - unsigned long tmp; - __asm__ __volatile__("pitlb %0, %1\n\t" : "=a" (tmp) : "a" (addr)); - return tmp; -} - -static inline unsigned long dtlb_probe(unsigned long addr) -{ - unsigned long tmp; - __asm__ __volatile__("pdtlb %0, %1\n\t" : "=a" (tmp) : "a" (addr)); - return tmp; -} - -static inline void invalidate_itlb_entry (unsigned long probe) -{ - __asm__ __volatile__("iitlb %0; isync\n\t" : : "a" (probe)); -} - -static inline void invalidate_dtlb_entry (unsigned long probe) -{ - __asm__ __volatile__("idtlb %0; dsync\n\t" : : "a" (probe)); -} - -/* Use the .._no_isync functions with caution. Generally, these are - * handy for bulk invalidates followed by a single 'isync'. The - * caller must follow up with an 'isync', which can be relatively - * expensive on some Xtensa implementations. - */ -static inline void invalidate_itlb_entry_no_isync (unsigned entry) -{ - /* Caller must follow up with 'isync'. */ - __asm__ __volatile__ ("iitlb %0\n" : : "a" (entry) ); -} - -static inline void invalidate_dtlb_entry_no_isync (unsigned entry) -{ - /* Caller must follow up with 'isync'. */ - __asm__ __volatile__ ("idtlb %0\n" : : "a" (entry) ); -} - -static inline void set_itlbcfg_register (unsigned long val) -{ - __asm__ __volatile__("wsr %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t" - : : "a" (val)); -} - -static inline void set_dtlbcfg_register (unsigned long val) -{ - __asm__ __volatile__("wsr %0, "__stringify(DTLBCFG)"; dsync\n\t" - : : "a" (val)); -} - -static inline void set_ptevaddr_register (unsigned long val) -{ - __asm__ __volatile__(" wsr %0, "__stringify(PTEVADDR)"; isync\n" - : : "a" (val)); -} - -static inline unsigned long read_ptevaddr_register (void) -{ - unsigned long tmp; - __asm__ __volatile__("rsr %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp)); - return tmp; -} - -static inline void write_dtlb_entry (pte_t entry, int way) -{ - __asm__ __volatile__("wdtlb %1, %0; dsync\n\t" - : : "r" (way), "r" (entry) ); -} - -static inline void write_itlb_entry (pte_t entry, int way) -{ - __asm__ __volatile__("witlb %1, %0; isync\n\t" - : : "r" (way), "r" (entry) ); -} - -static inline void invalidate_page_directory (void) -{ - invalidate_dtlb_entry (DTLB_WAY_PGD); - invalidate_dtlb_entry (DTLB_WAY_PGD+1); - invalidate_dtlb_entry (DTLB_WAY_PGD+2); -} - -static inline void invalidate_itlb_mapping (unsigned address) -{ - unsigned long tlb_entry; - if (((tlb_entry = itlb_probe(address)) & (1 << ITLB_HIT_BIT)) != 0) - invalidate_itlb_entry(tlb_entry); -} - -static inline void invalidate_dtlb_mapping (unsigned address) -{ - unsigned long tlb_entry; - if (((tlb_entry = dtlb_probe(address)) & (1 << DTLB_HIT_BIT)) != 0) - invalidate_dtlb_entry(tlb_entry); -} - -#define check_pgt_cache() do { } while (0) - - -/* - * DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa - * ISA and exist only for test purposes.. - * You may find it helpful for MMU debugging, however. - * - * 'at' is the unmodified input register - * 'as' is the output register, as follows (specific to the Linux config): - * - * as[31..12] contain the virtual address - * as[11..08] are meaningless - * as[07..00] contain the asid - */ - -static inline unsigned long read_dtlb_virtual (int way) -{ - unsigned long tmp; - __asm__ __volatile__("rdtlb0 %0, %1\n\t" : "=a" (tmp), "+a" (way)); - return tmp; -} - -static inline unsigned long read_dtlb_translation (int way) -{ - unsigned long tmp; - __asm__ __volatile__("rdtlb1 %0, %1\n\t" : "=a" (tmp), "+a" (way)); - return tmp; -} - -static inline unsigned long read_itlb_virtual (int way) -{ - unsigned long tmp; - __asm__ __volatile__("ritlb0 %0, %1\n\t" : "=a" (tmp), "+a" (way)); - return tmp; -} - -static inline unsigned long read_itlb_translation (int way) -{ - unsigned long tmp; - __asm__ __volatile__("ritlb1 %0, %1\n\t" : "=a" (tmp), "+a" (way)); - return tmp; -} - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _XTENSA_TLBFLUSH_H */ diff --git a/include/asm-xtensa/topology.h b/include/asm-xtensa/topology.h deleted file mode 100644 index 7309e38a0cc..00000000000 --- a/include/asm-xtensa/topology.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/topology.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TOPOLOGY_H -#define _XTENSA_TOPOLOGY_H - -#include <asm-generic/topology.h> - -#endif /* _XTENSA_TOPOLOGY_H */ diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h deleted file mode 100644 index c89569a8da0..00000000000 --- a/include/asm-xtensa/types.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-xtensa/types.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TYPES_H -#define _XTENSA_TYPES_H - -#include <asm-generic/int-ll64.h> - -#ifdef __ASSEMBLY__ -# define __XTENSA_UL(x) (x) -# define __XTENSA_UL_CONST(x) x -#else -# define __XTENSA_UL(x) ((unsigned long)(x)) -# define __XTENSA_UL_CONST(x) x##UL -#endif - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* __KERNEL__ */ -#endif - -#endif /* _XTENSA_TYPES_H */ diff --git a/include/asm-xtensa/uaccess.h b/include/asm-xtensa/uaccess.h deleted file mode 100644 index b8528426ab1..00000000000 --- a/include/asm-xtensa/uaccess.h +++ /dev/null @@ -1,500 +0,0 @@ -/* - * include/asm-xtensa/uaccess.h - * - * User space memory access functions - * - * These routines provide basic accessing functions to the user memory - * space for the kernel. This header file provides fuctions such as: - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_UACCESS_H -#define _XTENSA_UACCESS_H - -#include <linux/errno.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#ifdef __ASSEMBLY__ - -#include <asm/current.h> -#include <asm/asm-offsets.h> -#include <asm/processor.h> -#include <asm/types.h> - -/* - * These assembly macros mirror the C macros that follow below. They - * should always have identical functionality. See - * arch/xtensa/kernel/sys.S for usage. - */ - -#define KERNEL_DS 0 -#define USER_DS 1 - -#define get_ds (KERNEL_DS) - -/* - * get_fs reads current->thread.current_ds into a register. - * On Entry: - * <ad> anything - * <sp> stack - * On Exit: - * <ad> contains current->thread.current_ds - */ - .macro get_fs ad, sp - GET_CURRENT(\ad,\sp) - l32i \ad, \ad, THREAD_CURRENT_DS - .endm - -/* - * set_fs sets current->thread.current_ds to some value. - * On Entry: - * <at> anything (temp register) - * <av> value to write - * <sp> stack - * On Exit: - * <at> destroyed (actually, current) - * <av> preserved, value to write - */ - .macro set_fs at, av, sp - GET_CURRENT(\at,\sp) - s32i \av, \at, THREAD_CURRENT_DS - .endm - -/* - * kernel_ok determines whether we should bypass addr/size checking. - * See the equivalent C-macro version below for clarity. - * On success, kernel_ok branches to a label indicated by parameter - * <success>. This implies that the macro falls through to the next - * insruction on an error. - * - * Note that while this macro can be used independently, we designed - * in for optimal use in the access_ok macro below (i.e., we fall - * through on error). - * - * On Entry: - * <at> anything (temp register) - * <success> label to branch to on success; implies - * fall-through macro on error - * <sp> stack pointer - * On Exit: - * <at> destroyed (actually, current->thread.current_ds) - */ - -#if ((KERNEL_DS != 0) || (USER_DS == 0)) -# error Assembly macro kernel_ok fails -#endif - .macro kernel_ok at, sp, success - get_fs \at, \sp - beqz \at, \success - .endm - -/* - * user_ok determines whether the access to user-space memory is allowed. - * See the equivalent C-macro version below for clarity. - * - * On error, user_ok branches to a label indicated by parameter - * <error>. This implies that the macro falls through to the next - * instruction on success. - * - * Note that while this macro can be used independently, we designed - * in for optimal use in the access_ok macro below (i.e., we fall - * through on success). - * - * On Entry: - * <aa> register containing memory address - * <as> register containing memory size - * <at> temp register - * <error> label to branch to on error; implies fall-through - * macro on success - * On Exit: - * <aa> preserved - * <as> preserved - * <at> destroyed (actually, (TASK_SIZE + 1 - size)) - */ - .macro user_ok aa, as, at, error - movi \at, __XTENSA_UL_CONST(TASK_SIZE) - bgeu \as, \at, \error - sub \at, \at, \as - bgeu \aa, \at, \error - .endm - -/* - * access_ok determines whether a memory access is allowed. See the - * equivalent C-macro version below for clarity. - * - * On error, access_ok branches to a label indicated by parameter - * <error>. This implies that the macro falls through to the next - * instruction on success. - * - * Note that we assume success is the common case, and we optimize the - * branch fall-through case on success. - * - * On Entry: - * <aa> register containing memory address - * <as> register containing memory size - * <at> temp register - * <sp> - * <error> label to branch to on error; implies fall-through - * macro on success - * On Exit: - * <aa> preserved - * <as> preserved - * <at> destroyed - */ - .macro access_ok aa, as, at, sp, error - kernel_ok \at, \sp, .Laccess_ok_\@ - user_ok \aa, \as, \at, \error -.Laccess_ok_\@: - .endm - -#else /* __ASSEMBLY__ not defined */ - -#include <linux/sched.h> -#include <asm/types.h> - -/* - * The fs value determines whether argument validity checking should - * be performed or not. If get_fs() == USER_DS, checking is - * performed, with get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are - * grossly misnamed. - */ - -#define KERNEL_DS ((mm_segment_t) { 0 }) -#define USER_DS ((mm_segment_t) { 1 }) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.current_ds) -#define set_fs(val) (current->thread.current_ds = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) -#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) -#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) -#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) - -/* - * These are the main single-value transfer routines. They - * automatically use the right size if we just have the right pointer - * type. - * - * This gets kind of ugly. We want to return _two_ values in - * "get_user()" and yet we don't want to do any pointers, because that - * is too much of a performance impact. Thus we have a few rather ugly - * macros here, and hide all the uglyness from the user. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - */ -#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - int __cb; \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,1,"s8i",__cb); break; \ - case 2: __put_user_asm(x,ptr,retval,2,"s16i",__cb); break; \ - case 4: __put_user_asm(x,ptr,retval,4,"s32i",__cb); break; \ - case 8: { \ - __typeof__(*ptr) __v64 = x; \ - retval = __copy_to_user(ptr,&__v64,8); \ - break; \ - } \ - default: __put_user_bad(); \ - } \ -} while (0) - - -/* - * Consider a case of a user single load/store would cause both an - * unaligned exception and an MMU-related exception (unaligned - * exceptions happen first): - * - * User code passes a bad variable ptr to a system call. - * Kernel tries to access the variable. - * Unaligned exception occurs. - * Unaligned exception handler tries to make aligned accesses. - * Double exception occurs for MMU-related cause (e.g., page not mapped). - * do_page_fault() thinks the fault address belongs to the kernel, not the - * user, and panics. - * - * The kernel currently prohibits user unaligned accesses. We use the - * __check_align_* macros to check for unaligned addresses before - * accessing user space so we don't crash the kernel. Both - * __put_user_asm and __get_user_asm use these alignment macros, so - * macro-specific labels such as 0f, 1f, %0, %2, and %3 must stay in - * sync. - */ - -#define __check_align_1 "" - -#define __check_align_2 \ - " _bbci.l %3, 0, 1f \n" \ - " movi %0, %4 \n" \ - " _j 2f \n" - -#define __check_align_4 \ - " _bbsi.l %3, 0, 0f \n" \ - " _bbci.l %3, 1, 1f \n" \ - "0: movi %0, %4 \n" \ - " _j 2f \n" - - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - * - * WARNING: If you modify this macro at all, verify that the - * __check_align_* macros still work. - */ -#define __put_user_asm(x, addr, err, align, insn, cb) \ - __asm__ __volatile__( \ - __check_align_##align \ - "1: "insn" %2, %3, 0 \n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - " .align 4 \n" \ - "4: \n" \ - " .long 2b \n" \ - "5: \n" \ - " l32r %1, 4b \n" \ - " movi %0, %4 \n" \ - " jx %1 \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " .long 1b, 5b \n" \ - " .previous" \ - :"=r" (err), "=r" (cb) \ - :"r" ((int)(x)), "r" (addr), "i" (-EFAULT), "0" (err)) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size(__gu_val,(ptr),(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT, __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - int __cb; \ - retval = 0; \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,1,"l8ui",__cb); break; \ - case 2: __get_user_asm(x,ptr,retval,2,"l16ui",__cb); break; \ - case 4: __get_user_asm(x,ptr,retval,4,"l32i",__cb); break; \ - case 8: retval = __copy_from_user(&x,ptr,8); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - - -/* - * WARNING: If you modify this macro at all, verify that the - * __check_align_* macros still work. - */ -#define __get_user_asm(x, addr, err, align, insn, cb) \ - __asm__ __volatile__( \ - __check_align_##align \ - "1: "insn" %2, %3, 0 \n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - " .align 4 \n" \ - "4: \n" \ - " .long 2b \n" \ - "5: \n" \ - " l32r %1, 4b \n" \ - " movi %2, 0 \n" \ - " movi %0, %4 \n" \ - " jx %1 \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " .long 1b, 5b \n" \ - " .previous" \ - :"=r" (err), "=r" (cb), "=r" (x) \ - :"r" (addr), "i" (-EFAULT), "0" (err)) - - -/* - * Copy to/from user space - */ - -/* - * We use a generic, arbitrary-sized copy subroutine. The Xtensa - * architecture would cause heavy code bloat if we tried to inline - * these functions and provide __constant_copy_* equivalents like the - * i386 versions. __xtensa_copy_user is quite efficient. See the - * .fixup section of __xtensa_copy_user for a discussion on the - * X_zeroing equivalents for Xtensa. - */ - -extern unsigned __xtensa_copy_user(void *to, const void *from, unsigned n); -#define __copy_user(to,from,size) __xtensa_copy_user(to,from,size) - - -static inline unsigned long -__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n) -{ - return __copy_user(to,from,n); -} - -static inline unsigned long -__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n) -{ - return __copy_user(to,from,n); -} - -static inline unsigned long -__generic_copy_to_user(void *to, const void *from, unsigned long n) -{ - prefetch(from); - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_user(to,from,n); - return n; -} - -static inline unsigned long -__generic_copy_from_user(void *to, const void *from, unsigned long n) -{ - prefetchw(to); - if (access_ok(VERIFY_READ, from, n)) - return __copy_user(to,from,n); - else - memset(to, 0, n); - return n; -} - -#define copy_to_user(to,from,n) __generic_copy_to_user((to),(from),(n)) -#define copy_from_user(to,from,n) __generic_copy_from_user((to),(from),(n)) -#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) -#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - - -/* - * We need to return the number of bytes not cleared. Our memset() - * returns zero if a problem occurs while accessing user-space memory. - * In that event, return no memory cleared. Otherwise, zero for - * success. - */ - -static inline unsigned long -__xtensa_clear_user(void *addr, unsigned long size) -{ - if ( ! memset(addr, 0, size) ) - return size; - return 0; -} - -static inline unsigned long -clear_user(void *addr, unsigned long size) -{ - if (access_ok(VERIFY_WRITE, addr, size)) - return __xtensa_clear_user(addr, size); - return size ? -EFAULT : 0; -} - -#define __clear_user __xtensa_clear_user - - -extern long __strncpy_user(char *, const char *, long); -#define __strncpy_from_user __strncpy_user - -static inline long -strncpy_from_user(char *dst, const char *src, long count) -{ - if (access_ok(VERIFY_READ, src, 1)) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - - -#define strlen_user(str) strnlen_user((str), TASK_SIZE - 1) - -/* - * Return the size of a string (including the ending 0!) - */ -extern long __strnlen_user(const char *, long); - -static inline long strnlen_user(const char *str, long len) -{ - unsigned long top = __kernel_ok ? ~0UL : TASK_SIZE - 1; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len); -} - - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup.unit otherwise. */ - -extern unsigned long search_exception_table(unsigned long addr); -extern void sort_exception_table(void); - -/* Returns the new pc */ -#define fixup_exception(map_reg, fixup_unit, pc) \ -({ \ - fixup_unit; \ -}) - -#endif /* __ASSEMBLY__ */ -#endif /* _XTENSA_UACCESS_H */ diff --git a/include/asm-xtensa/ucontext.h b/include/asm-xtensa/ucontext.h deleted file mode 100644 index 94c94ed3e00..00000000000 --- a/include/asm-xtensa/ucontext.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-xtensa/ucontext.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_UCONTEXT_H -#define _XTENSA_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _XTENSA_UCONTEXT_H */ diff --git a/include/asm-xtensa/unaligned.h b/include/asm-xtensa/unaligned.h deleted file mode 100644 index 8f3424fc5d1..00000000000 --- a/include/asm-xtensa/unaligned.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Xtensa doesn't handle unaligned accesses efficiently. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ -#ifndef _ASM_XTENSA_UNALIGNED_H -#define _ASM_XTENSA_UNALIGNED_H - -#ifdef __XTENSA_EL__ -# include <linux/unaligned/le_memmove.h> -# include <linux/unaligned/be_byteshift.h> -# include <linux/unaligned/generic.h> -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#elif defined(__XTENSA_EB__) -# include <linux/unaligned/be_memmove.h> -# include <linux/unaligned/le_byteshift.h> -# include <linux/unaligned/generic.h> -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#else -# error processor byte order undefined! -#endif - -#endif /* _ASM_XTENSA_UNALIGNED_H */ diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h deleted file mode 100644 index c092c8fbb2c..00000000000 --- a/include/asm-xtensa/unistd.h +++ /dev/null @@ -1,735 +0,0 @@ -/* - * include/asm-xtensa/unistd.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_UNISTD_H -#define _XTENSA_UNISTD_H - -#ifndef __SYSCALL -# define __SYSCALL(nr,func,nargs) -#endif - -#define __NR_spill 0 -__SYSCALL( 0, sys_ni_syscall, 0) -#define __NR_xtensa 1 -__SYSCALL( 1, sys_ni_syscall, 0) -#define __NR_available4 2 -__SYSCALL( 2, sys_ni_syscall, 0) -#define __NR_available5 3 -__SYSCALL( 3, sys_ni_syscall, 0) -#define __NR_available6 4 -__SYSCALL( 4, sys_ni_syscall, 0) -#define __NR_available7 5 -__SYSCALL( 5, sys_ni_syscall, 0) -#define __NR_available8 6 -__SYSCALL( 6, sys_ni_syscall, 0) -#define __NR_available9 7 -__SYSCALL( 7, sys_ni_syscall, 0) - -/* File Operations */ - -#define __NR_open 8 -__SYSCALL( 8, sys_open, 3) -#define __NR_close 9 -__SYSCALL( 9, sys_close, 1) -#define __NR_dup 10 -__SYSCALL( 10, sys_dup, 1) -#define __NR_dup2 11 -__SYSCALL( 11, sys_dup2, 2) -#define __NR_read 12 -__SYSCALL( 12, sys_read, 3) -#define __NR_write 13 -__SYSCALL( 13, sys_write, 3) -#define __NR_select 14 -__SYSCALL( 14, sys_select, 5) -#define __NR_lseek 15 -__SYSCALL( 15, sys_lseek, 3) -#define __NR_poll 16 -__SYSCALL( 16, sys_poll, 3) -#define __NR__llseek 17 -__SYSCALL( 17, sys_llseek, 5) -#define __NR_epoll_wait 18 -__SYSCALL( 18, sys_epoll_wait, 4) -#define __NR_epoll_ctl 19 -__SYSCALL( 19, sys_epoll_ctl, 4) -#define __NR_epoll_create 20 -__SYSCALL( 20, sys_epoll_create, 1) -#define __NR_creat 21 -__SYSCALL( 21, sys_creat, 2) -#define __NR_truncate 22 -__SYSCALL( 22, sys_truncate, 2) -#define __NR_ftruncate 23 -__SYSCALL( 23, sys_ftruncate, 2) -#define __NR_readv 24 -__SYSCALL( 24, sys_readv, 3) -#define __NR_writev 25 -__SYSCALL( 25, sys_writev, 3) -#define __NR_fsync 26 -__SYSCALL( 26, sys_fsync, 1) -#define __NR_fdatasync 27 -__SYSCALL( 27, sys_fdatasync, 1) -#define __NR_truncate64 28 -__SYSCALL( 28, sys_truncate64, 2) -#define __NR_ftruncate64 29 -__SYSCALL( 29, sys_ftruncate64, 2) -#define __NR_pread64 30 -__SYSCALL( 30, sys_pread64, 6) -#define __NR_pwrite64 31 -__SYSCALL( 31, sys_pwrite64, 6) - -#define __NR_link 32 -__SYSCALL( 32, sys_link, 2) -#define __NR_rename 33 -__SYSCALL( 33, sys_rename, 2) -#define __NR_symlink 34 -__SYSCALL( 34, sys_symlink, 2) -#define __NR_readlink 35 -__SYSCALL( 35, sys_readlink, 3) -#define __NR_mknod 36 -__SYSCALL( 36, sys_mknod, 3) -#define __NR_pipe 37 -__SYSCALL( 37, xtensa_pipe, 1) -#define __NR_unlink 38 -__SYSCALL( 38, sys_unlink, 1) -#define __NR_rmdir 39 -__SYSCALL( 39, sys_rmdir, 1) - -#define __NR_mkdir 40 -__SYSCALL( 40, sys_mkdir, 2) -#define __NR_chdir 41 -__SYSCALL( 41, sys_chdir, 1) -#define __NR_fchdir 42 -__SYSCALL( 42, sys_fchdir, 1) -#define __NR_getcwd 43 -__SYSCALL( 43, sys_getcwd, 2) - -#define __NR_chmod 44 -__SYSCALL( 44, sys_chmod, 2) -#define __NR_chown 45 -__SYSCALL( 45, sys_chown, 3) -#define __NR_stat 46 -__SYSCALL( 46, sys_newstat, 2) -#define __NR_stat64 47 -__SYSCALL( 47, sys_stat64, 2) - -#define __NR_lchown 48 -__SYSCALL( 48, sys_lchown, 3) -#define __NR_lstat 49 -__SYSCALL( 49, sys_newlstat, 2) -#define __NR_lstat64 50 -__SYSCALL( 50, sys_lstat64, 2) -#define __NR_available51 51 -__SYSCALL( 51, sys_ni_syscall, 0) - -#define __NR_fchmod 52 -__SYSCALL( 52, sys_fchmod, 2) -#define __NR_fchown 53 -__SYSCALL( 53, sys_fchown, 3) -#define __NR_fstat 54 -__SYSCALL( 54, sys_newfstat, 2) -#define __NR_fstat64 55 -__SYSCALL( 55, sys_fstat64, 2) - -#define __NR_flock 56 -__SYSCALL( 56, sys_flock, 2) -#define __NR_access 57 -__SYSCALL( 57, sys_access, 2) -#define __NR_umask 58 -__SYSCALL( 58, sys_umask, 1) -#define __NR_getdents 59 -__SYSCALL( 59, sys_getdents, 3) -#define __NR_getdents64 60 -__SYSCALL( 60, sys_getdents64, 3) -#define __NR_fcntl64 61 -__SYSCALL( 61, sys_fcntl64, 3) -#define __NR_available62 62 -__SYSCALL( 62, sys_ni_syscall, 0) -#define __NR_fadvise64_64 63 -__SYSCALL( 63, xtensa_fadvise64_64, 6) -#define __NR_utime 64 /* glibc 2.3.3 ?? */ -__SYSCALL( 64, sys_utime, 2) -#define __NR_utimes 65 -__SYSCALL( 65, sys_utimes, 2) -#define __NR_ioctl 66 -__SYSCALL( 66, sys_ioctl, 3) -#define __NR_fcntl 67 -__SYSCALL( 67, sys_fcntl, 3) - -#define __NR_setxattr 68 -__SYSCALL( 68, sys_setxattr, 5) -#define __NR_getxattr 69 -__SYSCALL( 69, sys_getxattr, 4) -#define __NR_listxattr 70 -__SYSCALL( 70, sys_listxattr, 3) -#define __NR_removexattr 71 -__SYSCALL( 71, sys_removexattr, 2) -#define __NR_lsetxattr 72 -__SYSCALL( 72, sys_lsetxattr, 5) -#define __NR_lgetxattr 73 -__SYSCALL( 73, sys_lgetxattr, 4) -#define __NR_llistxattr 74 -__SYSCALL( 74, sys_llistxattr, 3) -#define __NR_lremovexattr 75 -__SYSCALL( 75, sys_lremovexattr, 2) -#define __NR_fsetxattr 76 -__SYSCALL( 76, sys_fsetxattr, 5) -#define __NR_fgetxattr 77 -__SYSCALL( 77, sys_fgetxattr, 4) -#define __NR_flistxattr 78 -__SYSCALL( 78, sys_flistxattr, 3) -#define __NR_fremovexattr 79 -__SYSCALL( 79, sys_fremovexattr, 2) - -/* File Map / Shared Memory Operations */ - -#define __NR_mmap2 80 -__SYSCALL( 80, xtensa_mmap2, 6) -#define __NR_munmap 81 -__SYSCALL( 81, sys_munmap, 2) -#define __NR_mprotect 82 -__SYSCALL( 82, sys_mprotect, 3) -#define __NR_brk 83 -__SYSCALL( 83, sys_brk, 1) -#define __NR_mlock 84 -__SYSCALL( 84, sys_mlock, 2) -#define __NR_munlock 85 -__SYSCALL( 85, sys_munlock, 2) -#define __NR_mlockall 86 -__SYSCALL( 86, sys_mlockall, 1) -#define __NR_munlockall 87 -__SYSCALL( 87, sys_munlockall, 0) -#define __NR_mremap 88 -__SYSCALL( 88, sys_mremap, 4) -#define __NR_msync 89 -__SYSCALL( 89, sys_msync, 3) -#define __NR_mincore 90 -__SYSCALL( 90, sys_mincore, 3) -#define __NR_madvise 91 -__SYSCALL( 91, sys_madvise, 3) -#define __NR_shmget 92 -__SYSCALL( 92, sys_shmget, 4) -#define __NR_shmat 93 -__SYSCALL( 93, xtensa_shmat, 4) -#define __NR_shmctl 94 -__SYSCALL( 94, sys_shmctl, 4) -#define __NR_shmdt 95 -__SYSCALL( 95, sys_shmdt, 4) - -/* Socket Operations */ - -#define __NR_socket 96 -__SYSCALL( 96, sys_socket, 3) -#define __NR_setsockopt 97 -__SYSCALL( 97, sys_setsockopt, 5) -#define __NR_getsockopt 98 -__SYSCALL( 98, sys_getsockopt, 5) -#define __NR_shutdown 99 -__SYSCALL( 99, sys_shutdown, 2) - -#define __NR_bind 100 -__SYSCALL(100, sys_bind, 3) -#define __NR_connect 101 -__SYSCALL(101, sys_connect, 3) -#define __NR_listen 102 -__SYSCALL(102, sys_listen, 2) -#define __NR_accept 103 -__SYSCALL(103, sys_accept, 3) - -#define __NR_getsockname 104 -__SYSCALL(104, sys_getsockname, 3) -#define __NR_getpeername 105 -__SYSCALL(105, sys_getpeername, 3) -#define __NR_sendmsg 106 -__SYSCALL(106, sys_sendmsg, 3) -#define __NR_recvmsg 107 -__SYSCALL(107, sys_recvmsg, 3) -#define __NR_send 108 -__SYSCALL(108, sys_send, 4) -#define __NR_recv 109 -__SYSCALL(109, sys_recv, 4) -#define __NR_sendto 110 -__SYSCALL(110, sys_sendto, 6) -#define __NR_recvfrom 111 -__SYSCALL(111, sys_recvfrom, 6) - -#define __NR_socketpair 112 -__SYSCALL(112, sys_socketpair, 4) -#define __NR_sendfile 113 -__SYSCALL(113, sys_sendfile, 4) -#define __NR_sendfile64 114 -__SYSCALL(114, sys_sendfile64, 4) -#define __NR_available115 115 -__SYSCALL(115, sys_ni_syscall, 0) - -/* Process Operations */ - -#define __NR_clone 116 -__SYSCALL(116, xtensa_clone, 5) -#define __NR_execve 117 -__SYSCALL(117, xtensa_execve, 3) -#define __NR_exit 118 -__SYSCALL(118, sys_exit, 1) -#define __NR_exit_group 119 -__SYSCALL(119, sys_exit_group, 1) -#define __NR_getpid 120 -__SYSCALL(120, sys_getpid, 0) -#define __NR_wait4 121 -__SYSCALL(121, sys_wait4, 4) -#define __NR_waitid 122 -__SYSCALL(122, sys_waitid, 5) -#define __NR_kill 123 -__SYSCALL(123, sys_kill, 2) -#define __NR_tkill 124 -__SYSCALL(124, sys_tkill, 2) -#define __NR_tgkill 125 -__SYSCALL(125, sys_tgkill, 3) -#define __NR_set_tid_address 126 -__SYSCALL(126, sys_set_tid_address, 1) -#define __NR_gettid 127 -__SYSCALL(127, sys_gettid, 0) -#define __NR_setsid 128 -__SYSCALL(128, sys_setsid, 0) -#define __NR_getsid 129 -__SYSCALL(129, sys_getsid, 1) -#define __NR_prctl 130 -__SYSCALL(130, sys_prctl, 5) -#define __NR_personality 131 -__SYSCALL(131, sys_personality, 1) -#define __NR_getpriority 132 -__SYSCALL(132, sys_getpriority, 2) -#define __NR_setpriority 133 -__SYSCALL(133, sys_setpriority, 3) -#define __NR_setitimer 134 -__SYSCALL(134, sys_setitimer, 3) -#define __NR_getitimer 135 -__SYSCALL(135, sys_getitimer, 2) -#define __NR_setuid 136 -__SYSCALL(136, sys_setuid, 1) -#define __NR_getuid 137 -__SYSCALL(137, sys_getuid, 0) -#define __NR_setgid 138 -__SYSCALL(138, sys_setgid, 1) -#define __NR_getgid 139 -__SYSCALL(139, sys_getgid, 0) -#define __NR_geteuid 140 -__SYSCALL(140, sys_geteuid, 0) -#define __NR_getegid 141 -__SYSCALL(141, sys_getegid, 0) -#define __NR_setreuid 142 -__SYSCALL(142, sys_setreuid, 2) -#define __NR_setregid 143 -__SYSCALL(143, sys_setregid, 2) -#define __NR_setresuid 144 -__SYSCALL(144, sys_setresuid, 3) -#define __NR_getresuid 145 -__SYSCALL(145, sys_getresuid, 3) -#define __NR_setresgid 146 -__SYSCALL(146, sys_setresgid, 3) -#define __NR_getresgid 147 -__SYSCALL(147, sys_getresgid, 3) -#define __NR_setpgid 148 -__SYSCALL(148, sys_setpgid, 2) -#define __NR_getpgid 149 -__SYSCALL(149, sys_getpgid, 1) -#define __NR_getppid 150 -__SYSCALL(150, sys_getppid, 0) -#define __NR_getpgrp 151 -__SYSCALL(151, sys_getpgrp, 0) - -#define __NR_reserved152 152 /* set_thread_area */ -__SYSCALL(152, sys_ni_syscall, 0) -#define __NR_reserved153 153 /* get_thread_area */ -__SYSCALL(153, sys_ni_syscall, 0) -#define __NR_times 154 -__SYSCALL(154, sys_times, 1) -#define __NR_acct 155 -__SYSCALL(155, sys_acct, 1) -#define __NR_sched_setaffinity 156 -__SYSCALL(156, sys_sched_setaffinity, 3) -#define __NR_sched_getaffinity 157 -__SYSCALL(157, sys_sched_getaffinity, 3) -#define __NR_capget 158 -__SYSCALL(158, sys_capget, 2) -#define __NR_capset 159 -__SYSCALL(159, sys_capset, 2) -#define __NR_ptrace 160 -__SYSCALL(160, sys_ptrace, 4) -#define __NR_semtimedop 161 -__SYSCALL(161, sys_semtimedop, 5) -#define __NR_semget 162 -__SYSCALL(162, sys_semget, 4) -#define __NR_semop 163 -__SYSCALL(163, sys_semop, 4) -#define __NR_semctl 164 -__SYSCALL(164, sys_semctl, 4) -#define __NR_available165 165 -__SYSCALL(165, sys_ni_syscall, 0) -#define __NR_msgget 166 -__SYSCALL(166, sys_msgget, 4) -#define __NR_msgsnd 167 -__SYSCALL(167, sys_msgsnd, 4) -#define __NR_msgrcv 168 -__SYSCALL(168, sys_msgrcv, 4) -#define __NR_msgctl 169 -__SYSCALL(169, sys_msgctl, 4) -#define __NR_available170 170 -__SYSCALL(170, sys_ni_syscall, 0) -#define __NR_available171 171 -__SYSCALL(171, sys_ni_syscall, 0) - -/* File System */ - -#define __NR_mount 172 -__SYSCALL(172, sys_mount, 5) -#define __NR_swapon 173 -__SYSCALL(173, sys_swapon, 2) -#define __NR_chroot 174 -__SYSCALL(174, sys_chroot, 1) -#define __NR_pivot_root 175 -__SYSCALL(175, sys_pivot_root, 2) -#define __NR_umount 176 -__SYSCALL(176, sys_umount, 2) -#define __NR_swapoff 177 -__SYSCALL(177, sys_swapoff, 1) -#define __NR_sync 178 -__SYSCALL(178, sys_sync, 0) -#define __NR_available179 179 -__SYSCALL(179, sys_ni_syscall, 0) -#define __NR_setfsuid 180 -__SYSCALL(180, sys_setfsuid, 1) -#define __NR_setfsgid 181 -__SYSCALL(181, sys_setfsgid, 1) -#define __NR_sysfs 182 -__SYSCALL(182, sys_sysfs, 3) -#define __NR_ustat 183 -__SYSCALL(183, sys_ustat, 2) -#define __NR_statfs 184 -__SYSCALL(184, sys_statfs, 2) -#define __NR_fstatfs 185 -__SYSCALL(185, sys_fstatfs, 2) -#define __NR_statfs64 186 -__SYSCALL(186, sys_statfs64, 3) -#define __NR_fstatfs64 187 -__SYSCALL(187, sys_fstatfs64, 3) - -/* System */ - -#define __NR_setrlimit 188 -__SYSCALL(188, sys_setrlimit, 2) -#define __NR_getrlimit 189 -__SYSCALL(189, sys_getrlimit, 2) -#define __NR_getrusage 190 -__SYSCALL(190, sys_getrusage, 2) -#define __NR_futex 191 -__SYSCALL(191, sys_futex, 5) -#define __NR_gettimeofday 192 -__SYSCALL(192, sys_gettimeofday, 2) -#define __NR_settimeofday 193 -__SYSCALL(193, sys_settimeofday, 2) -#define __NR_adjtimex 194 -__SYSCALL(194, sys_adjtimex, 1) -#define __NR_nanosleep 195 -__SYSCALL(195, sys_nanosleep, 2) -#define __NR_getgroups 196 -__SYSCALL(196, sys_getgroups, 2) -#define __NR_setgroups 197 -__SYSCALL(197, sys_setgroups, 2) -#define __NR_sethostname 198 -__SYSCALL(198, sys_sethostname, 2) -#define __NR_setdomainname 199 -__SYSCALL(199, sys_setdomainname, 2) -#define __NR_syslog 200 -__SYSCALL(200, sys_syslog, 3) -#define __NR_vhangup 201 -__SYSCALL(201, sys_vhangup, 0) -#define __NR_uselib 202 -__SYSCALL(202, sys_uselib, 1) -#define __NR_reboot 203 -__SYSCALL(203, sys_reboot, 3) -#define __NR_quotactl 204 -__SYSCALL(204, sys_quotactl, 4) -#define __NR_nfsservctl 205 -__SYSCALL(205, sys_nfsservctl, 3) -#define __NR__sysctl 206 -__SYSCALL(206, sys_sysctl, 1) -#define __NR_bdflush 207 -__SYSCALL(207, sys_bdflush, 2) -#define __NR_uname 208 -__SYSCALL(208, sys_newuname, 1) -#define __NR_sysinfo 209 -__SYSCALL(209, sys_sysinfo, 1) -#define __NR_init_module 210 -__SYSCALL(210, sys_init_module, 2) -#define __NR_delete_module 211 -__SYSCALL(211, sys_delete_module, 1) - -#define __NR_sched_setparam 212 -__SYSCALL(212, sys_sched_setparam, 2) -#define __NR_sched_getparam 213 -__SYSCALL(213, sys_sched_getparam, 2) -#define __NR_sched_setscheduler 214 -__SYSCALL(214, sys_sched_setscheduler, 3) -#define __NR_sched_getscheduler 215 -__SYSCALL(215, sys_sched_getscheduler, 1) -#define __NR_sched_get_priority_max 216 -__SYSCALL(216, sys_sched_get_priority_max, 1) -#define __NR_sched_get_priority_min 217 -__SYSCALL(217, sys_sched_get_priority_min, 1) -#define __NR_sched_rr_get_interval 218 -__SYSCALL(218, sys_sched_rr_get_interval, 2) -#define __NR_sched_yield 219 -__SYSCALL(219, sys_sched_yield, 0) -#define __NR_available222 222 -__SYSCALL(222, sys_ni_syscall, 0) - -/* Signal Handling */ - -#define __NR_restart_syscall 223 -__SYSCALL(223, sys_restart_syscall, 0) -#define __NR_sigaltstack 224 -__SYSCALL(224, xtensa_sigaltstack, 2) -#define __NR_rt_sigreturn 225 -__SYSCALL(225, xtensa_rt_sigreturn, 1) -#define __NR_rt_sigaction 226 -__SYSCALL(226, sys_rt_sigaction, 4) -#define __NR_rt_sigprocmask 227 -__SYSCALL(227, sys_rt_sigprocmask, 4) -#define __NR_rt_sigpending 228 -__SYSCALL(228, sys_rt_sigpending, 2) -#define __NR_rt_sigtimedwait 229 -__SYSCALL(229, sys_rt_sigtimedwait, 4) -#define __NR_rt_sigqueueinfo 230 -__SYSCALL(230, sys_rt_sigqueueinfo, 3) -#define __NR_rt_sigsuspend 231 -__SYSCALL(231, xtensa_rt_sigsuspend, 2) - -/* Message */ - -#define __NR_mq_open 232 -__SYSCALL(232, sys_mq_open, 4) -#define __NR_mq_unlink 233 -__SYSCALL(233, sys_mq_unlink, 1) -#define __NR_mq_timedsend 234 -__SYSCALL(234, sys_mq_timedsend, 5) -#define __NR_mq_timedreceive 235 -__SYSCALL(235, sys_mq_timedreceive, 5) -#define __NR_mq_notify 236 -__SYSCALL(236, sys_mq_notify, 2) -#define __NR_mq_getsetattr 237 -__SYSCALL(237, sys_mq_getsetattr, 3) -#define __NR_available238 238 -__SYSCALL(238, sys_ni_syscall, 0) - -/* IO */ - -#define __NR_io_setup 239 -__SYSCALL(239, sys_io_setup, 2) -#define __NR_io_destroy 240 -__SYSCALL(240, sys_io_destroy, 1) -#define __NR_io_submit 241 -__SYSCALL(241, sys_io_submit, 3) -#define __NR_io_getevents 242 -__SYSCALL(242, sys_io_getevents, 5) -#define __NR_io_cancel 243 -__SYSCALL(243, sys_io_cancel, 3) -#define __NR_clock_settime 244 -__SYSCALL(244, sys_clock_settime, 2) -#define __NR_clock_gettime 245 -__SYSCALL(245, sys_clock_gettime, 2) -#define __NR_clock_getres 246 -__SYSCALL(246, sys_clock_getres, 2) -#define __NR_clock_nanosleep 247 -__SYSCALL(247, sys_clock_nanosleep, 4) - -/* Timer */ - -#define __NR_timer_create 248 -__SYSCALL(248, sys_timer_create, 3) -#define __NR_timer_delete 249 -__SYSCALL(249, sys_timer_delete, 1) -#define __NR_timer_settime 250 -__SYSCALL(250, sys_timer_settime, 4) -#define __NR_timer_gettime 251 -__SYSCALL(251, sys_timer_gettime, 2) -#define __NR_timer_getoverrun 252 -__SYSCALL(252, sys_timer_getoverrun, 1) - -/* System */ - -#define __NR_reserved244 253 -__SYSCALL(253, sys_ni_syscall, 0) -#define __NR_lookup_dcookie 254 -__SYSCALL(254, sys_lookup_dcookie, 4) -#define __NR_available255 255 -__SYSCALL(255, sys_ni_syscall, 0) -#define __NR_add_key 256 -__SYSCALL(256, sys_add_key, 5) -#define __NR_request_key 257 -__SYSCALL(257, sys_request_key, 5) -#define __NR_keyctl 258 -__SYSCALL(258, sys_keyctl, 5) -#define __NR_available259 259 -__SYSCALL(259, sys_ni_syscall, 0) - - -#define __NR_readahead 260 -__SYSCALL(260, sys_readahead, 5) -#define __NR_remap_file_pages 261 -__SYSCALL(261, sys_remap_file_pages, 5) -#define __NR_migrate_pages 262 -__SYSCALL(262, sys_migrate_pages, 0) -#define __NR_mbind 263 -__SYSCALL(263, sys_mbind, 6) -#define __NR_get_mempolicy 264 -__SYSCALL(264, sys_get_mempolicy, 5) -#define __NR_set_mempolicy 265 -__SYSCALL(265, sys_set_mempolicy, 3) -#define __NR_unshare 266 -__SYSCALL(266, sys_unshare, 1) -#define __NR_move_pages 267 -__SYSCALL(267, sys_move_pages, 0) -#define __NR_splice 268 -__SYSCALL(268, sys_splice, 0) -#define __NR_tee 269 -__SYSCALL(269, sys_tee, 0) -#define __NR_vmsplice 270 -__SYSCALL(270, sys_vmsplice, 0) -#define __NR_available271 271 -__SYSCALL(271, sys_ni_syscall, 0) - -#define __NR_pselect6 272 -__SYSCALL(272, sys_pselect6, 0) -#define __NR_ppoll 273 -__SYSCALL(273, sys_ppoll, 0) -#define __NR_epoll_pwait 274 -__SYSCALL(274, sys_epoll_pwait, 0) -#define __NR_available275 275 -__SYSCALL(275, sys_ni_syscall, 0) - -#define __NR_inotify_init 276 -__SYSCALL(276, sys_inotify_init, 0) -#define __NR_inotify_add_watch 277 -__SYSCALL(277, sys_inotify_add_watch, 3) -#define __NR_inotify_rm_watch 278 -__SYSCALL(278, sys_inotify_rm_watch, 2) -#define __NR_available279 279 -__SYSCALL(279, sys_ni_syscall, 0) - -#define __NR_getcpu 280 -__SYSCALL(280, sys_getcpu, 0) -#define __NR_kexec_load 281 -__SYSCALL(281, sys_ni_syscall, 0) - -#define __NR_ioprio_set 282 -__SYSCALL(282, sys_ioprio_set, 2) -#define __NR_ioprio_get 283 -__SYSCALL(283, sys_ioprio_get, 3) - -#define __NR_set_robust_list 284 -__SYSCALL(284, sys_set_robust_list, 3) -#define __NR_get_robust_list 285 -__SYSCALL(285, sys_get_robust_list, 3) -#define __NR_reserved286 286 /* sync_file_rangeX */ -__SYSCALL(286, sys_ni_syscall, 3) -#define __NR_available287 287 -__SYSCALL(287, sys_faccessat, 0) - -/* Relative File Operations */ - -#define __NR_openat 288 -__SYSCALL(288, sys_openat, 4) -#define __NR_mkdirat 289 -__SYSCALL(289, sys_mkdirat, 3) -#define __NR_mknodat 290 -__SYSCALL(290, sys_mknodat, 4) -#define __NR_unlinkat 291 -__SYSCALL(291, sys_unlinkat, 3) -#define __NR_renameat 292 -__SYSCALL(292, sys_renameat, 4) -#define __NR_linkat 293 -__SYSCALL(293, sys_linkat, 5) -#define __NR_symlinkat 294 -__SYSCALL(294, sys_symlinkat, 3) -#define __NR_readlinkat 295 -__SYSCALL(295, sys_readlinkat, 4) -#define __NR_utimensat 296 -__SYSCALL(296, sys_utimensat, 0) -#define __NR_fchownat 297 -__SYSCALL(297, sys_fchownat, 5) -#define __NR_futimesat 298 -__SYSCALL(298, sys_futimesat, 4) -#define __NR_fstatat64 299 -__SYSCALL(299, sys_fstatat64, 0) -#define __NR_fchmodat 300 -__SYSCALL(300, sys_fchmodat, 4) -#define __NR_faccessat 301 -__SYSCALL(301, sys_faccessat, 4) -#define __NR_available302 302 -__SYSCALL(302, sys_ni_syscall, 0) -#define __NR_available303 303 -__SYSCALL(303, sys_ni_syscall, 0) - -#define __NR_signalfd 304 -__SYSCALL(304, sys_signalfd, 3) -/* 305 was __NR_timerfd */ -__SYSCALL(305, sys_ni_syscall, 0) -#define __NR_eventfd 306 -__SYSCALL(306, sys_eventfd, 1) - -#define __NR_syscall_count 307 - -/* - * sysxtensa syscall handler - * - * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); - * a2 a6 a3 a4 a5 - */ - -#define SYS_XTENSA_RESERVED 0 /* don't use this */ -#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ -#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ -#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ -#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ - -#define SYS_XTENSA_COUNT 5 /* count */ - -#ifdef __KERNEL__ - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); - -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND -#define __ARCH_WANT_SYS_GETPGRP - -/* - * Ignore legacy system calls in the checksyscalls.sh script - */ - -#define __IGNORE_fork /* use clone */ -#define __IGNORE_time -#define __IGNORE_alarm /* use setitimer */ -#define __IGNORE_pause -#define __IGNORE_mmap /* use mmap2 */ -#define __IGNORE_vfork /* use clone */ -#define __IGNORE_fadvise64 /* use fadvise64_64 */ - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_UNISTD_H */ diff --git a/include/asm-xtensa/user.h b/include/asm-xtensa/user.h deleted file mode 100644 index 2c3ed23354a..00000000000 --- a/include/asm-xtensa/user.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-xtensa/user.h - * - * Xtensa Processor version. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_USER_H -#define _XTENSA_USER_H - -/* This file usually defines a 'struct user' structure. However, it it only - * used for a.out file, which are not supported on Xtensa. - */ - -#endif /* _XTENSA_USER_H */ diff --git a/include/asm-xtensa/variant-dc232b/core.h b/include/asm-xtensa/variant-dc232b/core.h deleted file mode 100644 index 525bd3d9015..00000000000 --- a/include/asm-xtensa/variant-dc232b/core.h +++ /dev/null @@ -1,424 +0,0 @@ -/* - * Xtensa processor core configuration information. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1999-2007 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_CONFIGURATION_H -#define _XTENSA_CORE_CONFIGURATION_H - - -/**************************************************************************** - Parameters Useful for Any Code, USER or PRIVILEGED - ****************************************************************************/ - -/* - * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is - * configured, and a value of 0 otherwise. These macros are always defined. - */ - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ -#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ -#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ -#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ -#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ -#define XCHAL_HAVE_DEBUG 1 /* debug option */ -#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ -#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ -#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ -#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ -#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ -#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ -#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ -#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ -#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ -#define XCHAL_HAVE_L32R 1 /* L32R instruction */ -#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ -#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ -#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ -#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ -#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ -#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ -#define XCHAL_HAVE_ABS 1 /* ABS instruction */ -/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ -/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ -#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ -#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ -#define XCHAL_HAVE_SPECULATION 0 /* speculation */ -#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ -#define XCHAL_NUM_CONTEXTS 1 /* */ -#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ -#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ -#define XCHAL_HAVE_PRID 1 /* processor ID register */ -#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ -#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ -#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ -#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ -#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ -#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ -#define XCHAL_HAVE_FP 0 /* floating point pkg */ -#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ -#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ -#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ -#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ -#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ -/* In T1050, applies to selected core load and store instructions (see ISA): */ -#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ -#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ - -#define XCHAL_SW_VERSION 701001 /* sw version of this header */ - -#define XCHAL_CORE_ID "dc232b" /* alphanum core name - (CoreID) set in the Xtensa - Processor Generator */ - -#define XCHAL_CORE_DESCRIPTION "Diamond 232L Standard Core Rev.B (LE)" -#define XCHAL_BUILD_UNIQUE_ID 0x0000BEEF /* 22-bit sw build ID */ - -/* - * These definitions describe the hardware targeted by this software. - */ -#define XCHAL_HW_CONFIGID0 0xC56307FE /* ConfigID hi 32 bits*/ -#define XCHAL_HW_CONFIGID1 0x0D40BEEF /* ConfigID lo 32 bits*/ -#define XCHAL_HW_VERSION_NAME "LX2.1.1" /* full version name */ -#define XCHAL_HW_VERSION_MAJOR 2210 /* major ver# of targeted hw */ -#define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */ -#define XCHAL_HW_VERSION 221001 /* major*100+minor */ -#define XCHAL_HW_REL_LX2 1 -#define XCHAL_HW_REL_LX2_1 1 -#define XCHAL_HW_REL_LX2_1_1 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 -/* If software targets a *range* of hardware versions, these are the bounds: */ -#define XCHAL_HW_MIN_VERSION_MAJOR 2210 /* major v of earliest tgt hw */ -#define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */ -#define XCHAL_HW_MIN_VERSION 221001 /* earliest targeted hw */ -#define XCHAL_HW_MAX_VERSION_MAJOR 2210 /* major v of latest tgt hw */ -#define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */ -#define XCHAL_HW_MAX_VERSION 221001 /* latest targeted hw */ - - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ -#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ -#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ -#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ - -#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ -#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */ - -#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ - - - - -/**************************************************************************** - Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code - ****************************************************************************/ - - -#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ - -/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ - -/* Number of cache sets in log2(lines per way): */ -#define XCHAL_ICACHE_SETWIDTH 7 -#define XCHAL_DCACHE_SETWIDTH 7 - -/* Cache set associativity (number of ways): */ -#define XCHAL_ICACHE_WAYS 4 -#define XCHAL_DCACHE_WAYS 4 - -/* Cache features: */ -#define XCHAL_ICACHE_LINE_LOCKABLE 1 -#define XCHAL_DCACHE_LINE_LOCKABLE 1 -#define XCHAL_ICACHE_ECC_PARITY 0 -#define XCHAL_DCACHE_ECC_PARITY 0 - -/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ -#define XCHAL_CA_BITS 4 - - -/*---------------------------------------------------------------------- - INTERNAL I/D RAM/ROMs and XLMI - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ -#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ -#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ -#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ -#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ -#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ - - -/*---------------------------------------------------------------------- - INTERRUPTS and TIMERS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ -#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ -#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ -#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ -#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ -#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ -#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ -#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ -#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels - (not including level zero) */ -#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ - /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ - -/* Masks of interrupts at each interrupt level: */ -#define XCHAL_INTLEVEL1_MASK 0x001F80FF -#define XCHAL_INTLEVEL2_MASK 0x00000100 -#define XCHAL_INTLEVEL3_MASK 0x00200E00 -#define XCHAL_INTLEVEL4_MASK 0x00001000 -#define XCHAL_INTLEVEL5_MASK 0x00002000 -#define XCHAL_INTLEVEL6_MASK 0x00000000 -#define XCHAL_INTLEVEL7_MASK 0x00004000 - -/* Masks of interrupts at each range 1..n of interrupt levels: */ -#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF -#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF -#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF -#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF -#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF -#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF -#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF - -/* Level of each interrupt: */ -#define XCHAL_INT0_LEVEL 1 -#define XCHAL_INT1_LEVEL 1 -#define XCHAL_INT2_LEVEL 1 -#define XCHAL_INT3_LEVEL 1 -#define XCHAL_INT4_LEVEL 1 -#define XCHAL_INT5_LEVEL 1 -#define XCHAL_INT6_LEVEL 1 -#define XCHAL_INT7_LEVEL 1 -#define XCHAL_INT8_LEVEL 2 -#define XCHAL_INT9_LEVEL 3 -#define XCHAL_INT10_LEVEL 3 -#define XCHAL_INT11_LEVEL 3 -#define XCHAL_INT12_LEVEL 4 -#define XCHAL_INT13_LEVEL 5 -#define XCHAL_INT14_LEVEL 7 -#define XCHAL_INT15_LEVEL 1 -#define XCHAL_INT16_LEVEL 1 -#define XCHAL_INT17_LEVEL 1 -#define XCHAL_INT18_LEVEL 1 -#define XCHAL_INT19_LEVEL 1 -#define XCHAL_INT20_LEVEL 1 -#define XCHAL_INT21_LEVEL 3 -#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ -#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ -#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with - EXCSAVE/EPS/EPC_n, RFI n) */ - -/* Type of each interrupt: */ -#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI -#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE - -/* Masks of interrupts for each type of interrupt: */ -#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 -#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 -#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 -#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F -#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 -#define XCHAL_INTTYPE_MASK_NMI 0x00004000 -#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 - -/* Interrupt numbers assigned to specific interrupt sources: */ -#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ -#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ -#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ -#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED -#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ - -/* Interrupt numbers for levels at which only one interrupt is configured: */ -#define XCHAL_INTLEVEL2_NUM 8 -#define XCHAL_INTLEVEL4_NUM 12 -#define XCHAL_INTLEVEL5_NUM 13 -#define XCHAL_INTLEVEL7_NUM 14 -/* (There are many interrupts each at level(s) 1, 3.) */ - - -/* - * External interrupt vectors/levels. - * These macros describe how Xtensa processor interrupt numbers - * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) - * map to external BInterrupt<n> pins, for those interrupts - * configured as external (level-triggered, edge-triggered, or NMI). - * See the Xtensa processor databook for more details. - */ - -/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ -#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ -#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ -#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ -#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ -#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ -#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ -#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ -#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ -#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ -#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ -#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ -#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ -#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ -#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ -#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ -#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ -#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ - - -/*---------------------------------------------------------------------- - EXCEPTIONS and VECTORS - ----------------------------------------------------------------------*/ - -#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture - number: 1 == XEA1 (old) - 2 == XEA2 (new) - 0 == XEAX (extern) */ -#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ -#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ -#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ -#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ -#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ -#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ -#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ -#define XCHAL_VECBASE_RESET_VADDR 0xD0000000 /* VECBASE reset value */ -#define XCHAL_VECBASE_RESET_PADDR 0x00000000 -#define XCHAL_RESET_VECBASE_OVERLAP 0 - -#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000 -#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000 -#define XCHAL_RESET_VECTOR1_VADDR 0xD8000500 -#define XCHAL_RESET_VECTOR1_PADDR 0x00000500 -#define XCHAL_RESET_VECTOR_VADDR 0xFE000000 -#define XCHAL_RESET_VECTOR_PADDR 0xFE000000 -#define XCHAL_USER_VECOFS 0x00000340 -#define XCHAL_USER_VECTOR_VADDR 0xD0000340 -#define XCHAL_USER_VECTOR_PADDR 0x00000340 -#define XCHAL_KERNEL_VECOFS 0x00000300 -#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000300 -#define XCHAL_KERNEL_VECTOR_PADDR 0x00000300 -#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD00003C0 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000003C0 -#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 -#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 -#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 -#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 -#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 -#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 -#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 -#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 -#define XCHAL_INTLEVEL2_VECOFS 0x00000180 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000180 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000180 -#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD00001C0 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000001C0 -#define XCHAL_INTLEVEL4_VECOFS 0x00000200 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xD0000200 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00000200 -#define XCHAL_INTLEVEL5_VECOFS 0x00000240 -#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xD0000240 -#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00000240 -#define XCHAL_INTLEVEL6_VECOFS 0x00000280 -#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xD0000280 -#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00000280 -#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS -#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR -#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR -#define XCHAL_NMI_VECOFS 0x000002C0 -#define XCHAL_NMI_VECTOR_VADDR 0xD00002C0 -#define XCHAL_NMI_VECTOR_PADDR 0x000002C0 -#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS -#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR -#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR - - -/*---------------------------------------------------------------------- - DEBUG - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ -#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ -#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ -#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ - - -/*---------------------------------------------------------------------- - MMU - ----------------------------------------------------------------------*/ - -/* See core-matmap.h header file for more details. */ - -#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ -#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ -#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ -#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ -#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ -#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ -#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table - [autorefill] and protection) - usable for an MMU-based OS */ -/* If none of the above last 4 are set, it's a custom TLB configuration. */ -#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ -#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ - -#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ -#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ -#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ - -#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ - - -#endif /* _XTENSA_CORE_CONFIGURATION_H */ - diff --git a/include/asm-xtensa/variant-dc232b/tie-asm.h b/include/asm-xtensa/variant-dc232b/tie-asm.h deleted file mode 100644 index ed4f53f529d..00000000000 --- a/include/asm-xtensa/variant-dc232b/tie-asm.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This header file contains assembly-language definitions (assembly - * macros, etc.) for this specific Xtensa processor's TIE extensions - * and options. It is customized to this Xtensa processor configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999-2007 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_TIE_ASM_H -#define _XTENSA_CORE_TIE_ASM_H - -/* Selection parameter values for save-area save/restore macros: */ -/* Option vs. TIE: */ -#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ -#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ -/* Whether used automatically by compiler: */ -#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ -#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ -/* ABI handling across function calls: */ -#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ -#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ -#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ -/* Misc */ -#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ - - - -/* Macro to save all non-coprocessor (extra) custom TIE and optional state - * (not including zero-overhead loop registers). - * Save area ptr (clobbered): ptr (1 byte aligned) - * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) - */ - .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL - xchal_sa_start \continue, \ofs - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-8, 4, 4 - rsr \at1, ACCLO // MAC16 accumulator - rsr \at2, ACCHI - s32i \at1, \ptr, .Lxchal_ofs_ + 0 - s32i \at2, \ptr, .Lxchal_ofs_ + 4 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-16, 4, 4 - rsr \at1, M0 // MAC16 registers - rsr \at2, M1 - s32i \at1, \ptr, .Lxchal_ofs_ + 0 - s32i \at2, \ptr, .Lxchal_ofs_ + 4 - rsr \at1, M2 - rsr \at2, M3 - s32i \at1, \ptr, .Lxchal_ofs_ + 8 - s32i \at2, \ptr, .Lxchal_ofs_ + 12 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 16 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - rsr \at1, SCOMPARE1 // conditional store option - s32i \at1, \ptr, .Lxchal_ofs_ + 0 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - rur \at1, THREADPTR // threadptr option - s32i \at1, \ptr, .Lxchal_ofs_ + 0 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .endm // xchal_ncp_store - -/* Macro to save all non-coprocessor (extra) custom TIE and optional state - * (not including zero-overhead loop registers). - * Save area ptr (clobbered): ptr (1 byte aligned) - * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) - */ - .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL - xchal_sa_start \continue, \ofs - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-8, 4, 4 - l32i \at1, \ptr, .Lxchal_ofs_ + 0 - l32i \at2, \ptr, .Lxchal_ofs_ + 4 - wsr \at1, ACCLO // MAC16 accumulator - wsr \at2, ACCHI - .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-16, 4, 4 - l32i \at1, \ptr, .Lxchal_ofs_ + 0 - l32i \at2, \ptr, .Lxchal_ofs_ + 4 - wsr \at1, M0 // MAC16 registers - wsr \at2, M1 - l32i \at1, \ptr, .Lxchal_ofs_ + 8 - l32i \at2, \ptr, .Lxchal_ofs_ + 12 - wsr \at1, M2 - wsr \at2, M3 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 16 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - l32i \at1, \ptr, .Lxchal_ofs_ + 0 - wsr \at1, SCOMPARE1 // conditional store option - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - l32i \at1, \ptr, .Lxchal_ofs_ + 0 - wur \at1, THREADPTR // threadptr option - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .endm // xchal_ncp_load - - - -#define XCHAL_NCP_NUM_ATMPS 2 - - -#define XCHAL_SA_NUM_ATMPS 2 - -#endif /*_XTENSA_CORE_TIE_ASM_H*/ - diff --git a/include/asm-xtensa/variant-dc232b/tie.h b/include/asm-xtensa/variant-dc232b/tie.h deleted file mode 100644 index 018e81af439..00000000000 --- a/include/asm-xtensa/variant-dc232b/tie.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This header file describes this specific Xtensa processor's TIE extensions - * that extend basic Xtensa core functionality. It is customized to this - * Xtensa processor configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999-2007 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_TIE_H -#define _XTENSA_CORE_TIE_H - -#define XCHAL_CP_NUM 1 /* number of coprocessors */ -#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ -#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ -#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ - -/* Basic parameters of each coprocessor: */ -#define XCHAL_CP7_NAME "XTIOP" -#define XCHAL_CP7_IDENT XTIOP -#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ -#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ -#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ - -/* Filler info for unassigned coprocessors, to simplify arrays etc: */ -#define XCHAL_CP0_SA_SIZE 0 -#define XCHAL_CP0_SA_ALIGN 1 -#define XCHAL_CP1_SA_SIZE 0 -#define XCHAL_CP1_SA_ALIGN 1 -#define XCHAL_CP2_SA_SIZE 0 -#define XCHAL_CP2_SA_ALIGN 1 -#define XCHAL_CP3_SA_SIZE 0 -#define XCHAL_CP3_SA_ALIGN 1 -#define XCHAL_CP4_SA_SIZE 0 -#define XCHAL_CP4_SA_ALIGN 1 -#define XCHAL_CP5_SA_SIZE 0 -#define XCHAL_CP5_SA_ALIGN 1 -#define XCHAL_CP6_SA_SIZE 0 -#define XCHAL_CP6_SA_ALIGN 1 - -/* Save area for non-coprocessor optional and custom (TIE) state: */ -#define XCHAL_NCP_SA_SIZE 32 -#define XCHAL_NCP_SA_ALIGN 4 - -/* Total save area for optional and custom state (NCP + CPn): */ -#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ -#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ - -/* - * Detailed contents of save areas. - * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) - * before expanding the XCHAL_xxx_SA_LIST() macros. - * - * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, - * dbnum,base,regnum,bitsz,gapsz,reset,x...) - * - * s = passed from XCHAL_*_LIST(s), eg. to select how to expand - * ccused = set if used by compiler without special options or code - * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) - * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) - * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) - * name = lowercase reg name (no quotes) - * galign = group byte alignment (power of 2) (galign >= align) - * align = register byte alignment (power of 2) - * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) - * (not including any pad bytes required to galign this or next reg) - * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) - * base = reg shortname w/o index (or sr=special, ur=TIE user reg) - * regnum = reg index in regfile, or special/TIE-user reg number - * bitsz = number of significant bits (regfile width, or ur/sr mask bits) - * gapsz = intervening bits, if bitsz bits not stored contiguously - * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) - * reset = register reset value (or 0 if undefined at reset) - * x = reserved for future use (0 until then) - * - * To filter out certain registers, e.g. to expand only the non-global - * registers used by the compiler, you can do something like this: - * - * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) - * #define SELCC0(p...) - * #define SELCC1(abikind,p...) SELAK##abikind(p) - * #define SELAK0(p...) REG(p) - * #define SELAK1(p...) REG(p) - * #define SELAK2(p...) - * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ - * ...what you want to expand... - */ - -#define XCHAL_NCP_SA_NUM 8 -#define XCHAL_NCP_SA_LIST(s) \ - XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ - XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ - XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ - XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ - XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ - XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ - XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ - XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) - -#define XCHAL_CP0_SA_NUM 0 -#define XCHAL_CP0_SA_LIST(s) /* empty */ - -#define XCHAL_CP1_SA_NUM 0 -#define XCHAL_CP1_SA_LIST(s) /* empty */ - -#define XCHAL_CP2_SA_NUM 0 -#define XCHAL_CP2_SA_LIST(s) /* empty */ - -#define XCHAL_CP3_SA_NUM 0 -#define XCHAL_CP3_SA_LIST(s) /* empty */ - -#define XCHAL_CP4_SA_NUM 0 -#define XCHAL_CP4_SA_LIST(s) /* empty */ - -#define XCHAL_CP5_SA_NUM 0 -#define XCHAL_CP5_SA_LIST(s) /* empty */ - -#define XCHAL_CP6_SA_NUM 0 -#define XCHAL_CP6_SA_LIST(s) /* empty */ - -#define XCHAL_CP7_SA_NUM 0 -#define XCHAL_CP7_SA_LIST(s) /* empty */ - -/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ -#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 - -#endif /*_XTENSA_CORE_TIE_H*/ - diff --git a/include/asm-xtensa/variant-fsf/core.h b/include/asm-xtensa/variant-fsf/core.h deleted file mode 100644 index 2f337605c74..00000000000 --- a/include/asm-xtensa/variant-fsf/core.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Xtensa processor core configuration information. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999-2006 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_H -#define _XTENSA_CORE_H - - -/**************************************************************************** - Parameters Useful for Any Code, USER or PRIVILEGED - ****************************************************************************/ - -/* - * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is - * configured, and a value of 0 otherwise. These macros are always defined. - */ - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_BE 1 /* big-endian byte ordering */ -#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ -#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ -#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ -#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ -#define XCHAL_HAVE_DEBUG 1 /* debug option */ -#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ -#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ -#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ -#define XCHAL_HAVE_MINMAX 0 /* MIN/MAX instructions */ -#define XCHAL_HAVE_SEXT 0 /* SEXT instruction */ -#define XCHAL_HAVE_CLAMPS 0 /* CLAMPS instruction */ -#define XCHAL_HAVE_MUL16 0 /* MUL16S/MUL16U instructions */ -#define XCHAL_HAVE_MUL32 0 /* MULL instruction */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ -#define XCHAL_HAVE_L32R 1 /* L32R instruction */ -#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ -#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ -#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ -#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ -#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ -#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ -#define XCHAL_HAVE_ABS 1 /* ABS instruction */ -/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ -/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ -#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */ -#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */ -#define XCHAL_HAVE_SPECULATION 0 /* speculation */ -#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ -#define XCHAL_NUM_CONTEXTS 1 /* */ -#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ -#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ -#define XCHAL_HAVE_PRID 1 /* processor ID register */ -#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ -#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ -#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ -#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */ -#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ -#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ -#define XCHAL_HAVE_FP 0 /* floating point pkg */ -#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ -#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ -#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */ -#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ -#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ -/* In T1050, applies to selected core load and store instructions (see ISA): */ -#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ -#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ - -#define XCHAL_CORE_ID "fsf" /* alphanum core name - (CoreID) set in the Xtensa - Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00006700 /* 22-bit sw build ID */ - -/* - * These definitions describe the hardware targeted by this software. - */ -#define XCHAL_HW_CONFIGID0 0xC103C3FF /* ConfigID hi 32 bits*/ -#define XCHAL_HW_CONFIGID1 0x0C006700 /* ConfigID lo 32 bits*/ -#define XCHAL_HW_VERSION_NAME "LX2.0.0" /* full version name */ -#define XCHAL_HW_VERSION_MAJOR 2200 /* major ver# of targeted hw */ -#define XCHAL_HW_VERSION_MINOR 0 /* minor ver# of targeted hw */ -#define XTHAL_HW_REL_LX2 1 -#define XTHAL_HW_REL_LX2_0 1 -#define XTHAL_HW_REL_LX2_0_0 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 -/* If software targets a *range* of hardware versions, these are the bounds: */ -#define XCHAL_HW_MIN_VERSION_MAJOR 2200 /* major v of earliest tgt hw */ -#define XCHAL_HW_MIN_VERSION_MINOR 0 /* minor v of earliest tgt hw */ -#define XCHAL_HW_MAX_VERSION_MAJOR 2200 /* major v of latest tgt hw */ -#define XCHAL_HW_MAX_VERSION_MINOR 0 /* minor v of latest tgt hw */ - - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */ -#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */ -#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */ -#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */ - -#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */ -#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */ - -#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ - - - - -/**************************************************************************** - Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code - ****************************************************************************/ - - -#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ - -/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ - -/* Number of cache sets in log2(lines per way): */ -#define XCHAL_ICACHE_SETWIDTH 8 -#define XCHAL_DCACHE_SETWIDTH 8 - -/* Cache set associativity (number of ways): */ -#define XCHAL_ICACHE_WAYS 2 -#define XCHAL_DCACHE_WAYS 2 - -/* Cache features: */ -#define XCHAL_ICACHE_LINE_LOCKABLE 0 -#define XCHAL_DCACHE_LINE_LOCKABLE 0 -#define XCHAL_ICACHE_ECC_PARITY 0 -#define XCHAL_DCACHE_ECC_PARITY 0 - -/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ -#define XCHAL_CA_BITS 4 - - -/*---------------------------------------------------------------------- - INTERNAL I/D RAM/ROMs and XLMI - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ -#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ -#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ -#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ -#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ -#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ - - -/*---------------------------------------------------------------------- - INTERRUPTS and TIMERS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ -#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ -#define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */ -#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ -#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ -#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ -#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ -#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */ -#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels - (not including level zero) */ -#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */ - /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ - -/* Masks of interrupts at each interrupt level: */ -#define XCHAL_INTLEVEL1_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_MASK 0x00008902 -#define XCHAL_INTLEVEL3_MASK 0x00011204 -#define XCHAL_INTLEVEL4_MASK 0x00000000 -#define XCHAL_INTLEVEL5_MASK 0x00000000 -#define XCHAL_INTLEVEL6_MASK 0x00000000 -#define XCHAL_INTLEVEL7_MASK 0x00000000 - -/* Masks of interrupts at each range 1..n of interrupt levels: */ -#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB -#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF - -/* Level of each interrupt: */ -#define XCHAL_INT0_LEVEL 1 -#define XCHAL_INT1_LEVEL 2 -#define XCHAL_INT2_LEVEL 3 -#define XCHAL_INT3_LEVEL 1 -#define XCHAL_INT4_LEVEL 1 -#define XCHAL_INT5_LEVEL 1 -#define XCHAL_INT6_LEVEL 1 -#define XCHAL_INT7_LEVEL 1 -#define XCHAL_INT8_LEVEL 2 -#define XCHAL_INT9_LEVEL 3 -#define XCHAL_INT10_LEVEL 1 -#define XCHAL_INT11_LEVEL 2 -#define XCHAL_INT12_LEVEL 3 -#define XCHAL_INT13_LEVEL 1 -#define XCHAL_INT14_LEVEL 1 -#define XCHAL_INT15_LEVEL 2 -#define XCHAL_INT16_LEVEL 3 -#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ -#define XCHAL_HAVE_DEBUG_EXTERN_INT 0 /* OCD external db interrupt */ - -/* Type of each interrupt: */ -#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE - -/* Masks of interrupts for each type of interrupt: */ -#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 -#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 -#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 -#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F -#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 -#define XCHAL_INTTYPE_MASK_NMI 0x00000000 -#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 - -/* Interrupt numbers assigned to specific interrupt sources: */ -#define XCHAL_TIMER0_INTERRUPT 10 /* CCOMPARE0 */ -#define XCHAL_TIMER1_INTERRUPT 11 /* CCOMPARE1 */ -#define XCHAL_TIMER2_INTERRUPT 12 /* CCOMPARE2 */ -#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED - -/* Interrupt numbers for levels at which only one interrupt is configured: */ -/* (There are many interrupts each at level(s) 1, 2, 3.) */ - - -/* - * External interrupt vectors/levels. - * These macros describe how Xtensa processor interrupt numbers - * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) - * map to external BInterrupt<n> pins, for those interrupts - * configured as external (level-triggered, edge-triggered, or NMI). - * See the Xtensa processor databook for more details. - */ - -/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ -#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ -#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ -#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ -#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ -#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ -#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ -#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ -#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ -#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ -#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ - - -/*---------------------------------------------------------------------- - EXCEPTIONS and VECTORS - ----------------------------------------------------------------------*/ - -#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture - number: 1 == XEA1 (old) - 2 == XEA2 (new) - 0 == XEAX (extern) */ -#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ -#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ -#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ -#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ -#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ - -#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 -#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 -#define XCHAL_USER_VECTOR_VADDR 0xD0000220 -#define XCHAL_USER_VECTOR_PADDR 0x00000220 -#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 -#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 -#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 -#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 -#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR -#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR - - -/*---------------------------------------------------------------------- - DEBUG - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ -#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ -#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ -#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ - - -/*---------------------------------------------------------------------- - MMU - ----------------------------------------------------------------------*/ - -/* See <xtensa/config/core-matmap.h> header file for more details. */ - -#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ -#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ -#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ -#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ -#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ -#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ -#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table - [autorefill] and protection) - usable for an MMU-based OS */ -/* If none of the above last 4 are set, it's a custom TLB configuration. */ -#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ -#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ - -#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ -#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ -#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ - -#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ - - -#endif /* _XTENSA_CORE_CONFIGURATION_H */ - diff --git a/include/asm-xtensa/variant-fsf/tie-asm.h b/include/asm-xtensa/variant-fsf/tie-asm.h deleted file mode 100644 index 68a73bf4ffc..00000000000 --- a/include/asm-xtensa/variant-fsf/tie-asm.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This header file contains assembly-language definitions (assembly - * macros, etc.) for this specific Xtensa processor's TIE extensions - * and options. It is customized to this Xtensa processor configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999-2008 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_TIE_ASM_H -#define _XTENSA_CORE_TIE_ASM_H - -/* Selection parameter values for save-area save/restore macros: */ -/* Option vs. TIE: */ -#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ -#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ -/* Whether used automatically by compiler: */ -#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ -#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ -/* ABI handling across function calls: */ -#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ -#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ -#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ -/* Misc */ -#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ - - - -/* Macro to save all non-coprocessor (extra) custom TIE and optional state - * (not including zero-overhead loop registers). - * Save area ptr (clobbered): ptr (1 byte aligned) - * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) - */ - .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL - xchal_sa_start \continue, \ofs - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - rur \at1, THREADPTR // threadptr option - s32i \at1, \ptr, .Lxchal_ofs_ + 0 - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .endm // xchal_ncp_store - -/* Macro to save all non-coprocessor (extra) custom TIE and optional state - * (not including zero-overhead loop registers). - * Save area ptr (clobbered): ptr (1 byte aligned) - * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) - */ - .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL - xchal_sa_start \continue, \ofs - .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select - xchal_sa_align \ptr, 0, 1024-4, 4, 4 - l32i \at1, \ptr, .Lxchal_ofs_ + 0 - wur \at1, THREADPTR // threadptr option - .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 - .endif - .endm // xchal_ncp_load - - - -#define XCHAL_NCP_NUM_ATMPS 1 - - -#define XCHAL_SA_NUM_ATMPS 1 - -#endif /*_XTENSA_CORE_TIE_ASM_H*/ - diff --git a/include/asm-xtensa/variant-fsf/tie.h b/include/asm-xtensa/variant-fsf/tie.h deleted file mode 100644 index bf4020116df..00000000000 --- a/include/asm-xtensa/variant-fsf/tie.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This header file describes this specific Xtensa processor's TIE extensions - * that extend basic Xtensa core functionality. It is customized to this - * Xtensa processor configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999-2007 Tensilica Inc. - */ - -#ifndef _XTENSA_CORE_TIE_H -#define _XTENSA_CORE_TIE_H - -#define XCHAL_CP_NUM 0 /* number of coprocessors */ -#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */ -#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ -#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ - -/* Basic parameters of each coprocessor: */ -#define XCHAL_CP7_NAME "XTIOP" -#define XCHAL_CP7_IDENT XTIOP -#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ -#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ -#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ - -/* Filler info for unassigned coprocessors, to simplify arrays etc: */ -#define XCHAL_NCP_SA_SIZE 0 -#define XCHAL_NCP_SA_ALIGN 1 -#define XCHAL_CP0_SA_SIZE 0 -#define XCHAL_CP0_SA_ALIGN 1 -#define XCHAL_CP1_SA_SIZE 0 -#define XCHAL_CP1_SA_ALIGN 1 -#define XCHAL_CP2_SA_SIZE 0 -#define XCHAL_CP2_SA_ALIGN 1 -#define XCHAL_CP3_SA_SIZE 0 -#define XCHAL_CP3_SA_ALIGN 1 -#define XCHAL_CP4_SA_SIZE 0 -#define XCHAL_CP4_SA_ALIGN 1 -#define XCHAL_CP5_SA_SIZE 0 -#define XCHAL_CP5_SA_ALIGN 1 -#define XCHAL_CP6_SA_SIZE 0 -#define XCHAL_CP6_SA_ALIGN 1 - -/* Save area for non-coprocessor optional and custom (TIE) state: */ -#define XCHAL_NCP_SA_SIZE 0 -#define XCHAL_NCP_SA_ALIGN 1 - -/* Total save area for optional and custom state (NCP + CPn): */ -#define XCHAL_TOTAL_SA_SIZE 0 /* with 16-byte align padding */ -#define XCHAL_TOTAL_SA_ALIGN 1 /* actual minimum alignment */ - -#define XCHAL_NCP_SA_NUM 0 -#define XCHAL_NCP_SA_LIST(s) -#define XCHAL_CP0_SA_NUM 0 -#define XCHAL_CP0_SA_LIST(s) -#define XCHAL_CP1_SA_NUM 0 -#define XCHAL_CP1_SA_LIST(s) -#define XCHAL_CP2_SA_NUM 0 -#define XCHAL_CP2_SA_LIST(s) -#define XCHAL_CP3_SA_NUM 0 -#define XCHAL_CP3_SA_LIST(s) -#define XCHAL_CP4_SA_NUM 0 -#define XCHAL_CP4_SA_LIST(s) -#define XCHAL_CP5_SA_NUM 0 -#define XCHAL_CP5_SA_LIST(s) -#define XCHAL_CP6_SA_NUM 0 -#define XCHAL_CP6_SA_LIST(s) -#define XCHAL_CP7_SA_NUM 0 -#define XCHAL_CP7_SA_LIST(s) - -/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ -#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 - -#endif /*_XTENSA_CORE_TIE_H*/ - diff --git a/include/asm-xtensa/vga.h b/include/asm-xtensa/vga.h deleted file mode 100644 index 1fd8cab3a29..00000000000 --- a/include/asm-xtensa/vga.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-xtensa/vga.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_VGA_H -#define _XTENSA_VGA_H - -#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x) - -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif diff --git a/include/asm-xtensa/xor.h b/include/asm-xtensa/xor.h deleted file mode 100644 index e7b1f083991..00000000000 --- a/include/asm-xtensa/xor.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/xor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_XOR_H -#define _XTENSA_XOR_H - -#include <asm-generic/xor.h> - -#endif diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 0acb07f31fa..47809ac94bc 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -395,7 +395,7 @@ struct drm_connector_funcs { void (*save)(struct drm_connector *connector); void (*restore)(struct drm_connector *connector); enum drm_connector_status (*detect)(struct drm_connector *connector); - void (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); int (*set_property)(struct drm_connector *connector, struct drm_property *property, uint64_t val); void (*destroy)(struct drm_connector *connector); diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 4bc04cf460a..0c6f0e11b41 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -88,7 +88,7 @@ struct drm_connector_helper_funcs { struct drm_encoder *(*best_encoder)(struct drm_connector *connector); }; -extern void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY); +extern int drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY); extern void drm_helper_disable_unused_functions(struct drm_device *dev); extern int drm_helper_hotplug_stage_two(struct drm_device *dev); extern bool drm_helper_initial_config(struct drm_device *dev, bool can_grow); diff --git a/include/linux/Kbuild b/include/linux/Kbuild index a3323f337e4..12e9a2957ca 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -371,3 +371,5 @@ unifdef-y += xattr.h unifdef-y += xfrm.h objhdr-y += version.h +header-y += wimax.h +header-y += wimax/ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fba8051fb29..6fce2fc2d12 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -131,22 +131,6 @@ extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity); */ void acpi_unregister_gsi (u32 gsi); -struct acpi_prt_entry { - struct list_head node; - struct acpi_pci_id id; - u8 pin; - struct { - acpi_handle handle; - u32 index; - } link; - u32 irq; -}; - -struct acpi_prt_list { - int count; - struct list_head entries; -}; - struct pci_dev; int acpi_pci_irq_enable (struct pci_dev *dev); @@ -270,6 +254,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n, #ifdef CONFIG_PM_SLEEP void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); +void __init acpi_s4_no_nvs(void); #endif /* CONFIG_PM_SLEEP */ #else /* CONFIG_ACPI */ diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index c8fdb6e658e..110c600c885 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -52,7 +52,6 @@ #ifndef __KERNEL__ #include <linux/types.h> -#include <asm/types.h> struct agp_version { __u16 major; diff --git a/include/linux/async.h b/include/linux/async.h new file mode 100644 index 00000000000..c4ecacd0b32 --- /dev/null +++ b/include/linux/async.h @@ -0,0 +1,25 @@ +/* + * async.h: Asynchronous function calls for boot performance + * + * (C) Copyright 2009 Intel Corporation + * Author: Arjan van de Ven <arjan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/types.h> +#include <linux/list.h> + +typedef u64 async_cookie_t; +typedef void (async_func_ptr) (void *data, async_cookie_t cookie); + +extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data); +extern async_cookie_t async_schedule_special(async_func_ptr *ptr, void *data, struct list_head *list); +extern void async_synchronize_full(void); +extern void async_synchronize_full_special(struct list_head *list); +extern void async_synchronize_cookie(async_cookie_t cookie); +extern void async_synchronize_cookie_special(async_cookie_t cookie, struct list_head *list); + diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 0f50d4cc436..45f6297821b 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -59,9 +59,7 @@ enum async_tx_flags { }; #ifdef CONFIG_DMA_ENGINE -void async_tx_issue_pending_all(void); -enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); -void async_tx_run_dependencies(struct dma_async_tx_descriptor *tx); +#define async_tx_issue_pending_all dma_issue_pending_all #ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL #include <asm/async_tx.h> #else @@ -77,19 +75,6 @@ static inline void async_tx_issue_pending_all(void) do { } while (0); } -static inline enum dma_status -dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) -{ - return DMA_SUCCESS; -} - -static inline void -async_tx_run_dependencies(struct dma_async_tx_descriptor *tx, - struct dma_chan *host_chan) -{ - do { } while (0); -} - static inline struct dma_chan * async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx, enum dma_transaction_type tx_type, struct page **dst, int dst_count, diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h index 05621cf2070..8b724000aa5 100644 --- a/include/linux/atm_idt77105.h +++ b/include/linux/atm_idt77105.h @@ -7,7 +7,7 @@ #ifndef LINUX_ATM_IDT77105_H #define LINUX_ATM_IDT77105_H -#include <asm/types.h> +#include <linux/types.h> #include <linux/atmioc.h> #include <linux/atmdev.h> diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h new file mode 100644 index 00000000000..2f1f95737ac --- /dev/null +++ b/include/linux/atmel-mci.h @@ -0,0 +1,39 @@ +#ifndef __LINUX_ATMEL_MCI_H +#define __LINUX_ATMEL_MCI_H + +#define ATMEL_MCI_MAX_NR_SLOTS 2 + +#include <linux/dw_dmac.h> + +/** + * struct mci_slot_pdata - board-specific per-slot configuration + * @bus_width: Number of data lines wired up the slot + * @detect_pin: GPIO pin wired to the card detect switch + * @wp_pin: GPIO pin wired to the write protect sensor + * + * If a given slot is not present on the board, @bus_width should be + * set to 0. The other fields are ignored in this case. + * + * Any pins that aren't available should be set to a negative value. + * + * Note that support for multiple slots is experimental -- some cards + * might get upset if we don't get the clock management exactly right. + * But in most cases, it should work just fine. + */ +struct mci_slot_pdata { + unsigned int bus_width; + int detect_pin; + int wp_pin; +}; + +/** + * struct mci_platform_data - board-specific MMC/SDcard configuration + * @dma_slave: DMA slave interface to use in data transfers. + * @slot: Per-slot configuration data. + */ +struct mci_platform_data { + struct dw_dma_slave dma_slave; + struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; +}; + +#endif /* __LINUX_ATMEL_MCI_H */ diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h index d7afa9dd663..f3b5d4e3a2a 100644 --- a/include/linux/auxvec.h +++ b/include/linux/auxvec.h @@ -23,16 +23,16 @@ #define AT_PLATFORM 15 /* string identifying CPU for optimizations */ #define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ #define AT_CLKTCK 17 /* frequency at which times() increments */ - +/* AT_* values 18 through 22 are reserved */ #define AT_SECURE 23 /* secure mode boolean */ - #define AT_BASE_PLATFORM 24 /* string identifying real platform, may * differ from AT_PLATFORM. */ +#define AT_RANDOM 25 /* address of 16 random bytes */ #define AT_EXECFN 31 /* filename of program */ #ifdef __KERNEL__ -#define AT_VECTOR_SIZE_BASE 18 /* NEW_AUX_ENT entries in auxiliary table */ +#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */ /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */ #endif diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 1ee9488ca2e..79ca2da81c8 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -31,6 +31,10 @@ struct backlight_device; struct fb_info; struct backlight_ops { + unsigned int options; + +#define BL_CORE_SUSPENDRESUME (1 << 0) + /* Notify the backlight driver some property has changed */ int (*update_status)(struct backlight_device *); /* Return the current backlight brightness (accounting for power, @@ -51,7 +55,19 @@ struct backlight_properties { modes; 4: full off), see FB_BLANK_XXX */ int power; /* FB Blanking active? (values as for power) */ + /* Due to be removed, please use (state & BL_CORE_FBBLANK) */ int fb_blank; + /* Flags used to signal drivers of state changes */ + /* Upper 4 bits are reserved for driver internal use */ + unsigned int state; + +#define BL_CORE_SUSPENDED (1 << 0) /* backlight is suspended */ +#define BL_CORE_FBBLANK (1 << 1) /* backlight is under an fb blank event */ +#define BL_CORE_DRIVER4 (1 << 28) /* reserved for driver specific use */ +#define BL_CORE_DRIVER3 (1 << 29) /* reserved for driver specific use */ +#define BL_CORE_DRIVER2 (1 << 30) /* reserved for driver specific use */ +#define BL_CORE_DRIVER1 (1 << 31) /* reserved for driver specific use */ + }; struct backlight_device { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7035cec583b..044467ef7b1 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -690,6 +690,8 @@ struct rq_map_data { struct page **pages; int page_order; int nr_entries; + unsigned long offset; + int null_mapped; }; struct req_iterator { diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 8605f8a74df..bd7ac793be1 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -171,7 +171,7 @@ void __wait_on_buffer(struct buffer_head *); wait_queue_head_t *bh_waitq_head(struct buffer_head *bh); int fsync_bdev(struct block_device *); struct super_block *freeze_bdev(struct block_device *); -void thaw_bdev(struct block_device *, struct super_block *); +int thaw_bdev(struct block_device *, struct super_block *); int fsync_super(struct super_block *); int fsync_no_super(struct block_device *); struct buffer_head *__find_get_block(struct block_device *bdev, sector_t block, @@ -346,6 +346,15 @@ static inline int remove_inode_buffers(struct inode *inode) { return 1; } static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; } static inline void invalidate_bdev(struct block_device *bdev) {} +static inline struct super_block *freeze_bdev(struct block_device *sb) +{ + return NULL; +} + +static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb) +{ + return 0; +} #endif /* CONFIG_BLOCK */ #endif /* _LINUX_BUFFER_HEAD_H */ diff --git a/include/linux/can/core.h b/include/linux/can/core.h index f50785ad478..25085cbadcf 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -19,7 +19,7 @@ #include <linux/skbuff.h> #include <linux/netdevice.h> -#define CAN_VERSION "20081130" +#define CAN_VERSION "20090105" /* increment this number each time you change some user-space interface */ #define CAN_ABI_VERSION "8" diff --git a/include/linux/capi.h b/include/linux/capi.h index fdebaaa9f66..65100d6cb89 100644 --- a/include/linux/capi.h +++ b/include/linux/capi.h @@ -12,7 +12,7 @@ #ifndef __LINUX_CAPI_H__ #define __LINUX_CAPI_H__ -#include <asm/types.h> +#include <linux/types.h> #include <linux/ioctl.h> #ifndef __KERNEL__ #include <linux/kernelcapi.h> diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 08b78c09b09..e267e62827b 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -52,9 +52,9 @@ struct cgroup_subsys_state { * hierarchy structure */ struct cgroup *cgroup; - /* State maintained by the cgroup system to allow - * subsystems to be "busy". Should be accessed via css_get() - * and css_put() */ + /* State maintained by the cgroup system to allow subsystems + * to be "busy". Should be accessed via css_get(), + * css_tryget() and and css_put(). */ atomic_t refcnt; @@ -64,11 +64,14 @@ struct cgroup_subsys_state { /* bits in struct cgroup_subsys_state flags field */ enum { CSS_ROOT, /* This CSS is the root of the subsystem */ + CSS_REMOVED, /* This CSS is dead */ }; /* - * Call css_get() to hold a reference on the cgroup; - * + * Call css_get() to hold a reference on the css; it can be used + * for a reference obtained via: + * - an existing ref-counted reference to the css + * - task->cgroups for a locked task */ static inline void css_get(struct cgroup_subsys_state *css) @@ -77,9 +80,32 @@ static inline void css_get(struct cgroup_subsys_state *css) if (!test_bit(CSS_ROOT, &css->flags)) atomic_inc(&css->refcnt); } + +static inline bool css_is_removed(struct cgroup_subsys_state *css) +{ + return test_bit(CSS_REMOVED, &css->flags); +} + +/* + * Call css_tryget() to take a reference on a css if your existing + * (known-valid) reference isn't already ref-counted. Returns false if + * the css has been destroyed. + */ + +static inline bool css_tryget(struct cgroup_subsys_state *css) +{ + if (test_bit(CSS_ROOT, &css->flags)) + return true; + while (!atomic_inc_not_zero(&css->refcnt)) { + if (test_bit(CSS_REMOVED, &css->flags)) + return false; + } + return true; +} + /* * css_put() should be called to release a reference taken by - * css_get() + * css_get() or css_tryget() */ extern void __css_put(struct cgroup_subsys_state *css); @@ -116,7 +142,7 @@ struct cgroup { struct list_head children; /* my children */ struct cgroup *parent; /* my parent */ - struct dentry *dentry; /* cgroup fs entry */ + struct dentry *dentry; /* cgroup fs entry, RCU protected */ /* Private pointers for each registered subsystem */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; @@ -145,6 +171,9 @@ struct cgroup { int pids_use_count; /* Length of the current tasks_pids array */ int pids_length; + + /* For RCU-protected deletion */ + struct rcu_head rcu_head; }; /* A css_set is a structure holding pointers to a set of @@ -337,9 +366,23 @@ struct cgroup_subsys { #define MAX_CGROUP_TYPE_NAMELEN 32 const char *name; - /* Protected by RCU */ - struct cgroupfs_root *root; + /* + * Protects sibling/children links of cgroups in this + * hierarchy, plus protects which hierarchy (or none) the + * subsystem is a part of (i.e. root/sibling). To avoid + * potential deadlocks, the following operations should not be + * undertaken while holding any hierarchy_mutex: + * + * - allocating memory + * - initiating hotplug events + */ + struct mutex hierarchy_mutex; + /* + * Link to parent, and list entry in parent's children. + * Protected by this->hierarchy_mutex and cgroup_lock() + */ + struct cgroupfs_root *root; struct list_head sibling; }; diff --git a/include/linux/compat.h b/include/linux/compat.h index e88f3ecf38b..3fd2194ff57 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -280,5 +280,18 @@ asmlinkage long compat_sys_timerfd_settime(int ufd, int flags, asmlinkage long compat_sys_timerfd_gettime(int ufd, struct compat_itimerspec __user *otmr); +asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page, + __u32 __user *pages, + const int __user *nodes, + int __user *status, + int flags); +asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename, + struct compat_timeval __user *t); +asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename, + struct compat_stat __user *statbuf, + int flag); +asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename, + int flags, int mode); + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index af40f8eb86f..1514d534dee 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -11,9 +11,19 @@ /* The "volatile" is due to gcc bugs */ #define barrier() __asm__ __volatile__("": : :"memory") -/* This macro obfuscates arithmetic on a variable address so that gcc - shouldn't recognize the original var, and make assumptions about it */ /* + * This macro obfuscates arithmetic on a variable address so that gcc + * shouldn't recognize the original var, and make assumptions about it. + * + * This is needed because the C standard makes it undefined to do + * pointer arithmetic on "objects" outside their boundaries and the + * gcc optimizers assume this is the case. In particular they + * assume such arithmetic does not wrap. + * + * A miscompilation has been observed because of this on PPC. + * To work around it we hide the relationship of the pointer and the object + * using this macro. + * * Versions of the ppc64 compiler before 4.1 had a bug where use of * RELOC_HIDE could trash r30. The bug can be worked around by changing * the inline assembly constraint from =g to =r, in this particular diff --git a/include/linux/connector.h b/include/linux/connector.h index 5c7f9468f75..34f2789d9b9 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -22,7 +22,7 @@ #ifndef __CONNECTOR_H #define __CONNECTOR_H -#include <asm/types.h> +#include <linux/types.h> #define CN_IDX_CONNECTOR 0xffffffff #define CN_VAL_CONNECTOR 0xffffffff diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 484b3abf61b..384b38d3e8e 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -80,8 +80,8 @@ struct cpufreq_real_policy { }; struct cpufreq_policy { - cpumask_t cpus; /* CPUs requiring sw coordination */ - cpumask_t related_cpus; /* CPUs with any coordination */ + cpumask_var_t cpus; /* CPUs requiring sw coordination */ + cpumask_var_t related_cpus; /* CPUs with any coordination */ unsigned int shared_type; /* ANY or ALL affected CPUs should set cpufreq */ unsigned int cpu; /* cpu nr of registered CPU */ diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 51ea2bdea0f..90c6074a36c 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -20,8 +20,9 @@ extern int number_of_cpusets; /* How many cpusets are defined in system? */ extern int cpuset_init_early(void); extern int cpuset_init(void); extern void cpuset_init_smp(void); -extern void cpuset_cpus_allowed(struct task_struct *p, cpumask_t *mask); -extern void cpuset_cpus_allowed_locked(struct task_struct *p, cpumask_t *mask); +extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); +extern void cpuset_cpus_allowed_locked(struct task_struct *p, + struct cpumask *mask); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); #define cpuset_current_mems_allowed (current->mems_allowed) void cpuset_init_current_mems_allowed(void); @@ -86,12 +87,13 @@ static inline int cpuset_init_early(void) { return 0; } static inline int cpuset_init(void) { return 0; } static inline void cpuset_init_smp(void) {} -static inline void cpuset_cpus_allowed(struct task_struct *p, cpumask_t *mask) +static inline void cpuset_cpus_allowed(struct task_struct *p, + struct cpumask *mask) { *mask = cpu_possible_map; } static inline void cpuset_cpus_allowed_locked(struct task_struct *p, - cpumask_t *mask) + struct cpumask *mask) { *mask = cpu_possible_map; } diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index 2d3d1e04ba9..d06fbf28634 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -150,8 +150,6 @@ struct CYZ_BOOT_CTRL { * architectures and compilers. */ -#include <asm/types.h> - typedef __u64 ucdouble; /* 64 bits, unsigned */ typedef __u32 uclong; /* 32 bits, unsigned */ typedef __u16 ucshort; /* 16 bits, unsigned */ diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index e1a6c046cea..23936b16426 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -63,6 +63,8 @@ struct dentry *debugfs_create_x16(const char *name, mode_t mode, struct dentry *parent, u16 *value); struct dentry *debugfs_create_x32(const char *name, mode_t mode, struct dentry *parent, u32 *value); +struct dentry *debugfs_create_size_t(const char *name, mode_t mode, + struct dentry *parent, size_t *value); struct dentry *debugfs_create_bool(const char *name, mode_t mode, struct dentry *parent, u32 *value); diff --git a/include/linux/device.h b/include/linux/device.h index 7d9da4b4993..45e5b1921fb 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -28,7 +28,6 @@ #define BUS_ID_SIZE 20 struct device; -struct device_private; struct device_driver; struct driver_private; struct class; @@ -366,10 +365,12 @@ struct device_dma_parameters { }; struct device { + struct klist klist_children; + struct klist_node knode_parent; /* node in sibling list */ + struct klist_node knode_driver; + struct klist_node knode_bus; struct device *parent; - struct device_private *p; - struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ unsigned uevent_suppress:1; diff --git a/include/linux/dio.h b/include/linux/dio.h index 1e65ebc2a3d..b2dd31ca171 100644 --- a/include/linux/dio.h +++ b/include/linux/dio.h @@ -241,7 +241,7 @@ struct dio_driver { extern int dio_find(int deviceid); extern unsigned long dio_scodetophysaddr(int scode); -extern void dio_create_sysfs_dev_files(struct dio_dev *); +extern int dio_create_sysfs_dev_files(struct dio_dev *); /* New-style probing */ extern int dio_register_driver(struct dio_driver *); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index adb0b084eb5..c73f1e2b59b 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -29,32 +29,6 @@ #include <linux/dma-mapping.h> /** - * enum dma_state - resource PNP/power management state - * @DMA_RESOURCE_SUSPEND: DMA device going into low power state - * @DMA_RESOURCE_RESUME: DMA device returning to full power - * @DMA_RESOURCE_AVAILABLE: DMA device available to the system - * @DMA_RESOURCE_REMOVED: DMA device removed from the system - */ -enum dma_state { - DMA_RESOURCE_SUSPEND, - DMA_RESOURCE_RESUME, - DMA_RESOURCE_AVAILABLE, - DMA_RESOURCE_REMOVED, -}; - -/** - * enum dma_state_client - state of the channel in the client - * @DMA_ACK: client would like to use, or was using this channel - * @DMA_DUP: client has already seen this channel, or is not using this channel - * @DMA_NAK: client does not want to see any more channels - */ -enum dma_state_client { - DMA_ACK, - DMA_DUP, - DMA_NAK, -}; - -/** * typedef dma_cookie_t - an opaque DMA cookie * * if dma_cookie_t is >0 it's a DMA request cookie, <0 it's an error code @@ -89,23 +63,13 @@ enum dma_transaction_type { DMA_MEMSET, DMA_MEMCPY_CRC32C, DMA_INTERRUPT, + DMA_PRIVATE, DMA_SLAVE, }; /* last transaction type for creation of the capabilities mask */ #define DMA_TX_TYPE_END (DMA_SLAVE + 1) -/** - * enum dma_slave_width - DMA slave register access width. - * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum dma_slave_width { - DMA_SLAVE_WIDTH_8BIT, - DMA_SLAVE_WIDTH_16BIT, - DMA_SLAVE_WIDTH_32BIT, -}; /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, @@ -132,32 +96,6 @@ enum dma_ctrl_flags { typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; /** - * struct dma_slave - Information about a DMA slave - * @dev: device acting as DMA slave - * @dma_dev: required DMA master device. If non-NULL, the client can not be - * bound to other masters than this. - * @tx_reg: physical address of data register used for - * memory-to-peripheral transfers - * @rx_reg: physical address of data register used for - * peripheral-to-memory transfers - * @reg_width: peripheral register width - * - * If dma_dev is non-NULL, the client can not be bound to other DMA - * masters than the one corresponding to this device. The DMA master - * driver may use this to determine if there is controller-specific - * data wrapped around this struct. Drivers of platform code that sets - * the dma_dev field must therefore make sure to use an appropriate - * controller-specific dma slave structure wrapping this struct. - */ -struct dma_slave { - struct device *dev; - struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum dma_slave_width reg_width; -}; - -/** * struct dma_chan_percpu - the per-CPU part of struct dma_chan * @refcount: local_t used for open-coded "bigref" counting * @memcpy_count: transaction counter @@ -165,7 +103,6 @@ struct dma_slave { */ struct dma_chan_percpu { - local_t refcount; /* stats */ unsigned long memcpy_count; unsigned long bytes_transferred; @@ -176,13 +113,14 @@ struct dma_chan_percpu { * @device: ptr to the dma device who supplies this channel, always !%NULL * @cookie: last cookie value returned to client * @chan_id: channel ID for sysfs - * @class_dev: class device for sysfs + * @dev: class device for sysfs * @refcount: kref, used in "bigref" slow-mode * @slow_ref: indicates that the DMA channel is free * @rcu: the DMA channel's RCU head * @device_node: used to add this to the device chan list * @local: per-cpu pointer to a struct dma_chan_percpu * @client-count: how many clients are using this channel + * @table_count: number of appearances in the mem-to-mem allocation table */ struct dma_chan { struct dma_device *device; @@ -190,73 +128,47 @@ struct dma_chan { /* sysfs */ int chan_id; - struct device dev; - - struct kref refcount; - int slow_ref; - struct rcu_head rcu; + struct dma_chan_dev *dev; struct list_head device_node; struct dma_chan_percpu *local; int client_count; + int table_count; }; -#define to_dma_chan(p) container_of(p, struct dma_chan, dev) - -void dma_chan_cleanup(struct kref *kref); - -static inline void dma_chan_get(struct dma_chan *chan) -{ - if (unlikely(chan->slow_ref)) - kref_get(&chan->refcount); - else { - local_inc(&(per_cpu_ptr(chan->local, get_cpu())->refcount)); - put_cpu(); - } -} +/** + * struct dma_chan_dev - relate sysfs device node to backing channel device + * @chan - driver channel device + * @device - sysfs device + * @dev_id - parent dma_device dev_id + * @idr_ref - reference count to gate release of dma_device dev_id + */ +struct dma_chan_dev { + struct dma_chan *chan; + struct device device; + int dev_id; + atomic_t *idr_ref; +}; -static inline void dma_chan_put(struct dma_chan *chan) +static inline const char *dma_chan_name(struct dma_chan *chan) { - if (unlikely(chan->slow_ref)) - kref_put(&chan->refcount, dma_chan_cleanup); - else { - local_dec(&(per_cpu_ptr(chan->local, get_cpu())->refcount)); - put_cpu(); - } + return dev_name(&chan->dev->device); } -/* - * typedef dma_event_callback - function pointer to a DMA event callback - * For each channel added to the system this routine is called for each client. - * If the client would like to use the channel it returns '1' to signal (ack) - * the dmaengine core to take out a reference on the channel and its - * corresponding device. A client must not 'ack' an available channel more - * than once. When a channel is removed all clients are notified. If a client - * is using the channel it must 'ack' the removal. A client must not 'ack' a - * removed channel more than once. - * @client - 'this' pointer for the client context - * @chan - channel to be acted upon - * @state - available or removed - */ -struct dma_client; -typedef enum dma_state_client (*dma_event_callback) (struct dma_client *client, - struct dma_chan *chan, enum dma_state state); +void dma_chan_cleanup(struct kref *kref); /** - * struct dma_client - info on the entity making use of DMA services - * @event_callback: func ptr to call when something happens - * @cap_mask: only return channels that satisfy the requested capabilities - * a value of zero corresponds to any capability - * @slave: data for preparing slave transfer. Must be non-NULL iff the - * DMA_SLAVE capability is requested. - * @global_node: list_head for global dma_client_list + * typedef dma_filter_fn - callback filter for dma_request_channel + * @chan: channel to be reviewed + * @filter_param: opaque parameter passed through dma_request_channel + * + * When this optional parameter is specified in a call to dma_request_channel a + * suitable channel is passed to this routine for further dispositioning before + * being returned. Where 'suitable' indicates a non-busy channel that + * satisfies the given capability mask. It returns 'true' to indicate that the + * channel is suitable. */ -struct dma_client { - dma_event_callback event_callback; - dma_cap_mask_t cap_mask; - struct dma_slave *slave; - struct list_head global_node; -}; +typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); typedef void (*dma_async_tx_callback)(void *dma_async_param); /** @@ -323,14 +235,10 @@ struct dma_device { dma_cap_mask_t cap_mask; int max_xor; - struct kref refcount; - struct completion done; - int dev_id; struct device *dev; - int (*device_alloc_chan_resources)(struct dma_chan *chan, - struct dma_client *client); + int (*device_alloc_chan_resources)(struct dma_chan *chan); void (*device_free_chan_resources)(struct dma_chan *chan); struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)( @@ -362,9 +270,18 @@ struct dma_device { /* --- public DMA engine API --- */ -void dma_async_client_register(struct dma_client *client); -void dma_async_client_unregister(struct dma_client *client); -void dma_async_client_chan_request(struct dma_client *client); +#ifdef CONFIG_DMA_ENGINE +void dmaengine_get(void); +void dmaengine_put(void); +#else +static inline void dmaengine_get(void) +{ +} +static inline void dmaengine_put(void) +{ +} +#endif + dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, void *src, size_t len); dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan, @@ -406,6 +323,12 @@ __dma_cap_set(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp) set_bit(tx_type, dstp->bits); } +#define dma_cap_zero(mask) __dma_cap_zero(&(mask)) +static inline void __dma_cap_zero(dma_cap_mask_t *dstp) +{ + bitmap_zero(dstp->bits, DMA_TX_TYPE_END); +} + #define dma_has_cap(tx, mask) __dma_has_cap((tx), &(mask)) static inline int __dma_has_cap(enum dma_transaction_type tx_type, dma_cap_mask_t *srcp) @@ -475,11 +398,25 @@ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie, } enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); +#ifdef CONFIG_DMA_ENGINE +enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); +#else +static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) +{ + return DMA_SUCCESS; +} +#endif /* --- DMA device --- */ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); +void dma_run_dependencies(struct dma_async_tx_descriptor *tx); +struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); +void dma_issue_pending_all(void); +#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) +struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); +void dma_release_channel(struct dma_chan *chan); /* --- Helper iov-locking functions --- */ diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index 04d217b442b..d797dde247f 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -22,14 +22,34 @@ struct dw_dma_platform_data { }; /** + * enum dw_dma_slave_width - DMA slave register access width. + * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum dw_dma_slave_width { + DW_DMA_SLAVE_WIDTH_8BIT, + DW_DMA_SLAVE_WIDTH_16BIT, + DW_DMA_SLAVE_WIDTH_32BIT, +}; + +/** * struct dw_dma_slave - Controller-specific information about a slave - * @slave: Generic information about the slave - * @ctl_lo: Platform-specific initializer for the CTL_LO register + * + * @dma_dev: required DMA master device + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width * @cfg_hi: Platform-specific initializer for the CFG_HI register * @cfg_lo: Platform-specific initializer for the CFG_LO register */ struct dw_dma_slave { - struct dma_slave slave; + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum dw_dma_slave_width reg_width; u32 cfg_hi; u32 cfg_lo; }; @@ -54,9 +74,4 @@ struct dw_dma_slave { #define DWC_CFGL_HS_DST_POL (1 << 18) /* dst handshake active low */ #define DWC_CFGL_HS_SRC_POL (1 << 19) /* src handshake active low */ -static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave) -{ - return container_of(slave, struct dw_dma_slave, slave); -} - #endif /* DW_DMAC_H */ diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h index 78c775a83f7..121720d74e1 100644 --- a/include/linux/ext2_fs.h +++ b/include/linux/ext2_fs.h @@ -194,6 +194,30 @@ struct ext2_group_desc #define EXT2_FL_USER_VISIBLE FS_FL_USER_VISIBLE /* User visible flags */ #define EXT2_FL_USER_MODIFIABLE FS_FL_USER_MODIFIABLE /* User modifiable flags */ +/* Flags that should be inherited by new inodes from their parent. */ +#define EXT2_FL_INHERITED (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\ + EXT2_SYNC_FL | EXT2_IMMUTABLE_FL | EXT2_APPEND_FL |\ + EXT2_NODUMP_FL | EXT2_NOATIME_FL | EXT2_COMPRBLK_FL|\ + EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\ + EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL) + +/* Flags that are appropriate for regular files (all but dir-specific ones). */ +#define EXT2_REG_FLMASK (~(EXT2_DIRSYNC_FL | EXT2_TOPDIR_FL)) + +/* Flags that are appropriate for non-directories/regular files. */ +#define EXT2_OTHER_FLMASK (EXT2_NODUMP_FL | EXT2_NOATIME_FL) + +/* Mask out flags that are inappropriate for the given type of inode. */ +static inline __u32 ext2_mask_flags(umode_t mode, __u32 flags) +{ + if (S_ISDIR(mode)) + return flags; + else if (S_ISREG(mode)) + return flags & EXT2_REG_FLMASK; + else + return flags & EXT2_OTHER_FLMASK; +} + /* * ioctl commands */ diff --git a/include/linux/ext2_fs_sb.h b/include/linux/ext2_fs_sb.h index dc541f3653d..1cdb66367c9 100644 --- a/include/linux/ext2_fs_sb.h +++ b/include/linux/ext2_fs_sb.h @@ -101,7 +101,7 @@ struct ext2_sb_info { struct percpu_counter s_freeblocks_counter; struct percpu_counter s_freeinodes_counter; struct percpu_counter s_dirs_counter; - struct blockgroup_lock s_blockgroup_lock; + struct blockgroup_lock *s_blockgroup_lock; /* root of the per fs reservation window tree */ spinlock_t s_rsv_window_lock; struct rb_root s_rsv_window_root; @@ -111,7 +111,7 @@ struct ext2_sb_info { static inline spinlock_t * sb_bgl_lock(struct ext2_sb_info *sbi, unsigned int block_group) { - return bgl_lock_ptr(&sbi->s_blockgroup_lock, block_group); + return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); } #endif /* _LINUX_EXT2_FS_SB */ diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index d14f0291848..dd495b8c309 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -178,6 +178,30 @@ struct ext3_group_desc #define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ #define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ +/* Flags that should be inherited by new inodes from their parent. */ +#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\ + EXT3_SYNC_FL | EXT3_IMMUTABLE_FL | EXT3_APPEND_FL |\ + EXT3_NODUMP_FL | EXT3_NOATIME_FL | EXT3_COMPRBLK_FL|\ + EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\ + EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL) + +/* Flags that are appropriate for regular files (all but dir-specific ones). */ +#define EXT3_REG_FLMASK (~(EXT3_DIRSYNC_FL | EXT3_TOPDIR_FL)) + +/* Flags that are appropriate for non-directories/regular files. */ +#define EXT3_OTHER_FLMASK (EXT3_NODUMP_FL | EXT3_NOATIME_FL) + +/* Mask out flags that are inappropriate for the given type of inode. */ +static inline __u32 ext3_mask_flags(umode_t mode, __u32 flags) +{ + if (S_ISDIR(mode)) + return flags; + else if (S_ISREG(mode)) + return flags & EXT3_REG_FLMASK; + else + return flags & EXT3_OTHER_FLMASK; +} + /* * Inode dynamic state flags */ @@ -354,6 +378,13 @@ struct ext3_inode { #define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ /* + * Misc. filesystem flags + */ +#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash in use */ +#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in use */ +#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* to test development code */ + +/* * Mount flags */ #define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ @@ -489,7 +520,23 @@ struct ext3_super_block { __u16 s_reserved_word_pad; __le32 s_default_mount_opts; __le32 s_first_meta_bg; /* First metablock block group */ - __u32 s_reserved[190]; /* Padding to the end of the block */ + __le32 s_mkfs_time; /* When the filesystem was created */ + __le32 s_jnl_blocks[17]; /* Backup of the journal inode */ + /* 64bit support valid if EXT4_FEATURE_COMPAT_64BIT */ +/*150*/ __le32 s_blocks_count_hi; /* Blocks count */ + __le32 s_r_blocks_count_hi; /* Reserved blocks count */ + __le32 s_free_blocks_count_hi; /* Free blocks count */ + __le16 s_min_extra_isize; /* All inodes have at least # bytes */ + __le16 s_want_extra_isize; /* New inodes should reserve # bytes */ + __le32 s_flags; /* Miscellaneous flags */ + __le16 s_raid_stride; /* RAID stride */ + __le16 s_mmp_interval; /* # seconds to wait in MMP checking */ + __le64 s_mmp_block; /* Block for multi-mount protection */ + __le32 s_raid_stripe_width; /* blocks on all data disks (N*stride)*/ + __u8 s_log_groups_per_flex; /* FLEX_BG group size */ + __u8 s_reserved_char_pad2; + __le16 s_reserved_pad; + __u32 s_reserved[162]; /* Padding to the end of the block */ }; #ifdef __KERNEL__ @@ -694,6 +741,9 @@ static inline __le16 ext3_rec_len_to_disk(unsigned len) #define DX_HASH_LEGACY 0 #define DX_HASH_HALF_MD4 1 #define DX_HASH_TEA 2 +#define DX_HASH_LEGACY_UNSIGNED 3 +#define DX_HASH_HALF_MD4_UNSIGNED 4 +#define DX_HASH_TEA_UNSIGNED 5 #ifdef __KERNEL__ diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h index e024e38248f..f07f34de2f0 100644 --- a/include/linux/ext3_fs_sb.h +++ b/include/linux/ext3_fs_sb.h @@ -57,10 +57,11 @@ struct ext3_sb_info { u32 s_next_generation; u32 s_hash_seed[4]; int s_def_hash_version; + int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */ struct percpu_counter s_freeblocks_counter; struct percpu_counter s_freeinodes_counter; struct percpu_counter s_dirs_counter; - struct blockgroup_lock s_blockgroup_lock; + struct blockgroup_lock *s_blockgroup_lock; /* root of the per fs reservation window tree */ spinlock_t s_rsv_window_lock; @@ -86,7 +87,7 @@ struct ext3_sb_info { static inline spinlock_t * sb_bgl_lock(struct ext3_sb_info *sbi, unsigned int block_group) { - return bgl_lock_ptr(&sbi->s_blockgroup_lock, block_group); + return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); } #endif /* _LINUX_EXT3_FS_SB */ diff --git a/include/linux/fb.h b/include/linux/fb.h index 1ee63df5be9..818fe21257e 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -1,7 +1,7 @@ #ifndef _LINUX_FB_H #define _LINUX_FB_H -#include <asm/types.h> +#include <linux/types.h> #include <linux/i2c.h> struct dentry; diff --git a/include/linux/fs.h b/include/linux/fs.h index d7eba77f666..6022f44043f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -234,6 +234,8 @@ struct inodes_stat_t { #define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ #define FIBMAP _IO(0x00,1) /* bmap access */ #define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ +#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ +#define FITHAW _IOWR('X', 120, int) /* Thaw */ #define FS_IOC_GETFLAGS _IOR('f', 1, long) #define FS_IOC_SETFLAGS _IOW('f', 2, long) @@ -565,6 +567,7 @@ struct address_space { struct block_device { dev_t bd_dev; /* not a kdev_t - it's a search key */ struct inode * bd_inode; /* will die */ + struct super_block * bd_super; int bd_openers; struct mutex bd_mutex; /* open/close mutex */ struct semaphore bd_mount_sem; @@ -590,6 +593,11 @@ struct block_device { * care to not mess up bd_private for that case. */ unsigned long bd_private; + + /* The counter of freeze processes */ + int bd_fsfreeze_count; + /* Mutex for freeze */ + struct mutex bd_fsfreeze_mutex; }; /* @@ -1184,6 +1192,11 @@ struct super_block { * generic_show_options() */ char *s_options; + + /* + * storage for asynchronous operations + */ + struct list_head s_async_list; }; extern struct timespec current_fs_time(struct super_block *sb); @@ -1371,8 +1384,8 @@ struct super_operations { void (*put_super) (struct super_block *); void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); - void (*write_super_lockfs) (struct super_block *); - void (*unlockfs) (struct super_block *); + int (*freeze_fs) (struct super_block *); + int (*unfreeze_fs) (struct super_block *); int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); @@ -1384,6 +1397,7 @@ struct super_operations { ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); #endif + int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t); }; /* diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 33a5992d493..20873d40246 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -393,11 +393,7 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) #define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */ #define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */ #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ -#define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ -#define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ -#define I2C_CLASS_SOUND (1<<6) /* sound devices */ #define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */ -#define I2C_CLASS_ALL (UINT_MAX) /* all of the above */ /* i2c_client_address_data is the struct for holding default client * addresses for a driver and for the parameters supplied on the diff --git a/include/linux/ide.h b/include/linux/ide.h index 3644f632338..194da5a4b0d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -871,7 +871,7 @@ struct ide_host { ide_hwif_t *cur_port; /* for hosts requiring serialization */ /* used for hosts requiring serialization */ - volatile long host_busy; + volatile unsigned long host_busy; }; #define IDE_HOST_BUSY 0 diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index a7d6a2234b3..c7a66882b6d 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -15,7 +15,7 @@ #ifndef __LINUX_IF_PPPOL2TP_H #define __LINUX_IF_PPPOL2TP_H -#include <asm/types.h> +#include <linux/types.h> #ifdef __KERNEL__ #include <linux/in.h> diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 6fb7f178857..30c88b2245f 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -17,7 +17,7 @@ #define __LINUX_IF_PPPOX_H -#include <asm/types.h> +#include <linux/types.h> #include <asm/byteorder.h> #ifdef __KERNEL__ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index a5cb0c3f6dc..f8ff918c208 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -115,6 +115,11 @@ extern u16 vlan_dev_vlan_id(const struct net_device *dev); extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, u16 vlan_tci, int polling); extern int vlan_hwaccel_do_receive(struct sk_buff *skb); +extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, + unsigned int vlan_tci, struct sk_buff *skb); +extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, + unsigned int vlan_tci, + struct napi_gro_fraginfo *info); #else static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev) @@ -140,6 +145,20 @@ static inline int vlan_hwaccel_do_receive(struct sk_buff *skb) { return 0; } + +static inline int vlan_gro_receive(struct napi_struct *napi, + struct vlan_group *grp, + unsigned int vlan_tci, struct sk_buff *skb) +{ + return NET_RX_DROP; +} + +static inline int vlan_gro_frags(struct napi_struct *napi, + struct vlan_group *grp, unsigned int vlan_tci, + struct napi_gro_fraginfo *info) +{ + return NET_RX_DROP; +} #endif /** diff --git a/include/linux/input.h b/include/linux/input.h index 9a6355f74db..1249a0c20a3 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -16,7 +16,7 @@ #include <sys/time.h> #include <sys/ioctl.h> #include <sys/types.h> -#include <asm/types.h> +#include <linux/types.h> #endif /* diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 041e95aac2b..32e4b2f7229 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -49,6 +49,7 @@ struct resource_list { #define IORESOURCE_SIZEALIGN 0x00020000 /* size indicates alignment */ #define IORESOURCE_STARTALIGN 0x00040000 /* start field is alignment */ +#define IORESOURCE_EXCLUSIVE 0x08000000 /* Userland may not map this resource */ #define IORESOURCE_DISABLED 0x10000000 #define IORESOURCE_UNSET 0x20000000 #define IORESOURCE_AUTO 0x40000000 @@ -133,13 +134,17 @@ static inline unsigned long resource_type(struct resource *res) } /* Convenience shorthand with allocation */ -#define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name)) -#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name)) +#define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name), 0) +#define __request_mem_region(start,n,name, excl) __request_region(&iomem_resource, (start), (n), (name), excl) +#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0) +#define request_mem_region_exclusive(start,n,name) \ + __request_region(&iomem_resource, (start), (n), (name), IORESOURCE_EXCLUSIVE) #define rename_region(region, newname) do { (region)->name = (newname); } while (0) extern struct resource * __request_region(struct resource *, resource_size_t start, - resource_size_t n, const char *name); + resource_size_t n, + const char *name, int flags); /* Compatibility cruft */ #define release_region(start,n) __release_region(&ioport_resource, (start), (n)) @@ -175,6 +180,7 @@ extern struct resource * __devm_request_region(struct device *dev, extern void __devm_release_region(struct device *dev, struct resource *parent, resource_size_t start, resource_size_t n); extern int iomem_map_sanity_check(resource_size_t addr, unsigned long size); +extern int iomem_is_exclusive(u64 addr); #endif /* __ASSEMBLY__ */ #endif /* _LINUX_IOPORT_H */ diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h index f98a656b17e..76dad480884 100644 --- a/include/linux/ioprio.h +++ b/include/linux/ioprio.h @@ -86,4 +86,6 @@ static inline int task_nice_ioclass(struct task_struct *task) */ extern int ioprio_best(unsigned short aprio, unsigned short bprio); +extern int set_task_ioprio(struct task_struct *task, int ioprio); + #endif diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 346e2b80be7..64246dce566 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -543,6 +543,11 @@ struct transaction_s unsigned long t_expires; /* + * When this transaction started, in nanoseconds [no locking] + */ + ktime_t t_start_time; + + /* * How many handles used this transaction? [t_handle_lock] */ int t_handle_count; @@ -609,6 +614,8 @@ struct transaction_s * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the * number that will fit in j_blocksize * @j_last_sync_writer: most recent pid which did a synchronous write + * @j_average_commit_time: the average amount of time in nanoseconds it + * takes to commit a transaction to the disk. * @j_private: An opaque pointer to fs-private information. */ @@ -798,9 +805,19 @@ struct journal_s struct buffer_head **j_wbuf; int j_wbufsize; + /* + * this is the pid of the last person to run a synchronous operation + * through the journal. + */ pid_t j_last_sync_writer; /* + * the average amount of time in nanoseconds it takes to commit a + * transaction to the disk. [j_state_lock] + */ + u64 j_average_commit_time; + + /* * An opaque pointer to fs-private information. ext3 puts its * superblock pointer here */ diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 34456476e76..b45109c61fb 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -638,6 +638,11 @@ struct transaction_s unsigned long t_expires; /* + * When this transaction started, in nanoseconds [no locking] + */ + ktime_t t_start_time; + + /* * How many handles used this transaction? [t_handle_lock] */ int t_handle_count; @@ -682,6 +687,8 @@ jbd2_time_diff(unsigned long start, unsigned long end) return end + (MAX_JIFFY_OFFSET - start); } +#define JBD2_NR_BATCH 64 + /** * struct journal_s - The journal_s type is the concrete type associated with * journal_t. @@ -826,6 +833,14 @@ struct journal_s struct mutex j_checkpoint_mutex; /* + * List of buffer heads used by the checkpoint routine. This + * was moved from jbd2_log_do_checkpoint() to reduce stack + * usage. Access to this array is controlled by the + * j_checkpoint_mutex. [j_checkpoint_mutex] + */ + struct buffer_head *j_chkpt_bhs[JBD2_NR_BATCH]; + + /* * Journal head: identifies the first unused block in the journal. * [j_state_lock] */ @@ -939,8 +954,26 @@ struct journal_s struct buffer_head **j_wbuf; int j_wbufsize; + /* + * this is the pid of hte last person to run a synchronous operation + * through the journal + */ pid_t j_last_sync_writer; + /* + * the average amount of time in nanoseconds it takes to commit a + * transaction to disk. [j_state_lock] + */ + u64 j_average_commit_time; + + /* + * minimum and maximum times that we should wait for + * additional filesystem operations to get batched into a + * synchronous handle in microseconds + */ + u32 j_min_batch_time; + u32 j_max_batch_time; + /* This function is called when a transaction is closed */ void (*j_commit_callback)(journal_t *, transaction_t *); @@ -1102,7 +1135,6 @@ extern int jbd2_journal_set_features (journal_t *, unsigned long, unsigned long, unsigned long); extern void jbd2_journal_clear_features (journal_t *, unsigned long, unsigned long, unsigned long); -extern int jbd2_journal_create (journal_t *); extern int jbd2_journal_load (journal_t *journal); extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); @@ -1177,8 +1209,8 @@ int jbd2_log_wait_commit(journal_t *journal, tid_t tid); int jbd2_log_do_checkpoint(journal_t *journal); void __jbd2_log_wait_for_space(journal_t *journal); -extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *); -extern int jbd2_cleanup_journal_tail(journal_t *); +extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *); +extern int jbd2_cleanup_journal_tail(journal_t *); /* Debugging code only: */ diff --git a/include/linux/joystick.h b/include/linux/joystick.h index b5e051295a6..9e20c29c1e1 100644 --- a/include/linux/joystick.h +++ b/include/linux/joystick.h @@ -27,7 +27,7 @@ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ -#include <asm/types.h> +#include <linux/types.h> #include <linux/input.h> /* diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 6b8e2027165..343df9ef241 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -476,6 +476,12 @@ static inline char *pack_hex_byte(char *buf, u8 byte) __val = __val < __min ? __min: __val; \ __val > __max ? __max: __val; }) + +/* + * swap - swap value of @a and @b + */ +#define swap(a, b) ({ typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; }) + /** * container_of - cast a member of a structure out to the containing structure * @ptr: the pointer to the member. diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 35525ac6333..5715f190760 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -7,7 +7,7 @@ * Note: you must update KVM_API_VERSION if you change this interface. */ -#include <asm/types.h> +#include <linux/types.h> #include <linux/compiler.h> #include <linux/ioctl.h> #include <asm/kvm.h> diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h index 81b4207deb9..96eea90f01a 100644 --- a/include/linux/leds-pca9532.h +++ b/include/linux/leds-pca9532.h @@ -15,6 +15,7 @@ #define __LINUX_PCA9532_H #include <linux/leds.h> +#include <linux/workqueue.h> enum pca9532_state { PCA9532_OFF = 0x0, @@ -31,6 +32,7 @@ struct pca9532_led { struct i2c_client *client; char *name; struct led_classdev ldev; + struct work_struct work; enum pca9532_type type; enum pca9532_state state; }; diff --git a/include/linux/leds.h b/include/linux/leds.h index d3a73f5a48c..24489da701e 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -32,7 +32,10 @@ struct led_classdev { int brightness; int flags; + /* Lower 16 bits reflect status */ #define LED_SUSPENDED (1 << 0) + /* Upper 16 bits reflect control information */ +#define LED_CORE_SUSPENDRESUME (1 << 16) /* Set LED brightness level */ /* Must not sleep, use a workqueue if needed */ @@ -62,7 +65,7 @@ struct led_classdev { extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); -extern void led_classdev_unregister(struct led_classdev *lcd); +extern void led_classdev_unregister(struct led_classdev *led_cdev); extern void led_classdev_suspend(struct led_classdev *led_cdev); extern void led_classdev_resume(struct led_classdev *led_cdev); diff --git a/include/linux/libata.h b/include/linux/libata.h index 3449de597ef..2c6bd66209f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -239,6 +239,7 @@ enum { /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ + ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ /* bits 24:31 of host->flags are reserved for LLD specific flags */ @@ -400,12 +401,14 @@ enum { ATA_TIMING_CYC8B, ATA_TIMING_ACTIVE = (1 << 4), ATA_TIMING_RECOVER = (1 << 5), - ATA_TIMING_CYCLE = (1 << 6), - ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_DMACK_HOLD = (1 << 6), + ATA_TIMING_CYCLE = (1 << 7), + ATA_TIMING_UDMA = (1 << 8), ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | ATA_TIMING_REC8B | ATA_TIMING_CYC8B | ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | - ATA_TIMING_CYCLE | ATA_TIMING_UDMA, + ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE | + ATA_TIMING_UDMA, }; enum ata_xfer_mask { @@ -865,6 +868,7 @@ struct ata_timing { unsigned short cyc8b; /* t0 for 8-bit I/O */ unsigned short active; /* t2 or tD */ unsigned short recover; /* t2i or tK */ + unsigned short dmack_hold; /* tj */ unsigned short cycle; /* t0 */ unsigned short udma; /* t2CYCTYP/2 */ }; @@ -926,6 +930,8 @@ extern void ata_host_init(struct ata_host *, struct device *, extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); +extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, + int cmd, void __user *arg); extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); @@ -1518,6 +1524,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap); extern const struct ata_port_operations ata_sff_port_ops; extern const struct ata_port_operations ata_bmdma_port_ops; +extern const struct ata_port_operations ata_bmdma32_port_ops; /* PIO only, sg_tablesize and dma_boundary limits can be removed */ #define ATA_PIO_SHT(drv_name) \ @@ -1545,6 +1552,8 @@ extern void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); +extern unsigned int ata_sff_data_xfer32(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); extern u8 ata_sff_irq_on(struct ata_port *ap); diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 23da3fa69ef..aa6fe7026de 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -43,8 +43,8 @@ struct nlm_host { struct sockaddr_storage h_addr; /* peer address */ size_t h_addrlen; struct sockaddr_storage h_srcaddr; /* our address (optional) */ - struct rpc_clnt * h_rpcclnt; /* RPC client to talk to peer */ - char * h_name; /* remote hostname */ + struct rpc_clnt *h_rpcclnt; /* RPC client to talk to peer */ + char *h_name; /* remote hostname */ u32 h_version; /* interface version */ unsigned short h_proto; /* transport proto */ unsigned short h_reclaiming : 1, @@ -64,21 +64,29 @@ struct nlm_host { spinlock_t h_lock; struct list_head h_granted; /* Locks in GRANTED state */ struct list_head h_reclaim; /* Locks in RECLAIM state */ - struct nsm_handle * h_nsmhandle; /* NSM status handle */ - - char h_addrbuf[48], /* address eyecatchers */ - h_srcaddrbuf[48]; + struct nsm_handle *h_nsmhandle; /* NSM status handle */ + char *h_addrbuf; /* address eyecatcher */ }; +/* + * The largest string sm_addrbuf should hold is a full-size IPv6 address + * (no "::" anywhere) with a scope ID. The buffer size is computed to + * hold eight groups of colon-separated four-hex-digit numbers, a + * percent sign, a scope id (at most 32 bits, in decimal), and NUL. + */ +#define NSM_ADDRBUF ((8 * 4 + 7) + (1 + 10) + 1) + struct nsm_handle { struct list_head sm_link; atomic_t sm_count; - char * sm_name; + char *sm_mon_name; + char *sm_name; struct sockaddr_storage sm_addr; size_t sm_addrlen; unsigned int sm_monitored : 1, sm_sticky : 1; /* don't unmonitor */ - char sm_addrbuf[48]; /* address eyecatcher */ + struct nsm_private sm_priv; + char sm_addrbuf[NSM_ADDRBUF]; }; /* @@ -104,16 +112,6 @@ static inline struct sockaddr *nlm_srcaddr(const struct nlm_host *host) return (struct sockaddr *)&host->h_srcaddr; } -static inline struct sockaddr_in *nsm_addr_in(const struct nsm_handle *handle) -{ - return (struct sockaddr_in *)&handle->sm_addr; -} - -static inline struct sockaddr *nsm_addr(const struct nsm_handle *handle) -{ - return (struct sockaddr *)&handle->sm_addr; -} - /* * Map an fl_owner_t into a unique 32-bit "pid" */ @@ -197,6 +195,7 @@ extern struct svc_procedure nlmsvc_procedures4[]; extern int nlmsvc_grace_period; extern unsigned long nlmsvc_timeout; extern int nsm_use_hostnames; +extern int nsm_local_state; /* * Lockd client functions @@ -231,10 +230,20 @@ void nlm_rebind_host(struct nlm_host *); struct nlm_host * nlm_get_host(struct nlm_host *); void nlm_release_host(struct nlm_host *); void nlm_shutdown_hosts(void); -extern void nlm_host_rebooted(const struct sockaddr_in *, const char *, - unsigned int, u32); -void nsm_release(struct nsm_handle *); +void nlm_host_rebooted(const struct nlm_reboot *); +/* + * Host monitoring + */ +int nsm_monitor(const struct nlm_host *host); +void nsm_unmonitor(const struct nlm_host *host); + +struct nsm_handle *nsm_get_handle(const struct sockaddr *sap, + const size_t salen, + const char *hostname, + const size_t hostname_len); +struct nsm_handle *nsm_reboot_lookup(const struct nlm_reboot *info); +void nsm_release(struct nsm_handle *nsm); /* * This is used in garbage collection and resource reclaim @@ -282,16 +291,25 @@ static inline struct inode *nlmsvc_file_inode(struct nlm_file *file) static inline int __nlm_privileged_request4(const struct sockaddr *sap) { const struct sockaddr_in *sin = (struct sockaddr_in *)sap; - return (sin->sin_addr.s_addr == htonl(INADDR_LOOPBACK)) && - (ntohs(sin->sin_port) < 1024); + + if (ntohs(sin->sin_port) > 1023) + return 0; + + return ipv4_is_loopback(sin->sin_addr.s_addr); } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) static inline int __nlm_privileged_request6(const struct sockaddr *sap) { const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap; - return (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LOOPBACK) && - (ntohs(sin6->sin6_port) < 1024); + + if (ntohs(sin6->sin6_port) > 1023) + return 0; + + if (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_MAPPED) + return ipv4_is_loopback(sin6->sin6_addr.s6_addr32[3]); + + return ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LOOPBACK; } #else /* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */ static inline int __nlm_privileged_request6(const struct sockaddr *sap) diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h deleted file mode 100644 index 5a5448bdb17..00000000000 --- a/include/linux/lockd/sm_inter.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/linux/lockd/sm_inter.h - * - * Declarations for the kernel statd client. - * - * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de> - */ - -#ifndef LINUX_LOCKD_SM_INTER_H -#define LINUX_LOCKD_SM_INTER_H - -#define SM_PROGRAM 100024 -#define SM_VERSION 1 -#define SM_STAT 1 -#define SM_MON 2 -#define SM_UNMON 3 -#define SM_UNMON_ALL 4 -#define SM_SIMU_CRASH 5 -#define SM_NOTIFY 6 - -#define SM_MAXSTRLEN 1024 -#define SM_PRIV_SIZE 16 - -/* - * Arguments for all calls to statd - */ -struct nsm_args { - __be32 addr; /* remote address */ - u32 prog; /* RPC callback info */ - u32 vers; - u32 proc; - - char * mon_name; -}; - -/* - * Result returned by statd - */ -struct nsm_res { - u32 status; - u32 state; -}; - -int nsm_monitor(struct nlm_host *); -int nsm_unmonitor(struct nlm_host *); -extern int nsm_local_state; - -#endif /* LINUX_LOCKD_SM_INTER_H */ diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h index d6b3a802c04..7dc5b6cb44c 100644 --- a/include/linux/lockd/xdr.h +++ b/include/linux/lockd/xdr.h @@ -13,6 +13,13 @@ #include <linux/nfs.h> #include <linux/sunrpc/xdr.h> +#define SM_MAXSTRLEN 1024 +#define SM_PRIV_SIZE 16 + +struct nsm_private { + unsigned char data[SM_PRIV_SIZE]; +}; + struct svc_rqst; #define NLM_MAXCOOKIELEN 32 @@ -77,10 +84,10 @@ struct nlm_res { * statd callback when client has rebooted */ struct nlm_reboot { - char * mon; - unsigned int len; - u32 state; - __be32 addr; + char *mon; + unsigned int len; + u32 state; + struct nsm_private priv; }; /* diff --git a/include/linux/loop.h b/include/linux/loop.h index 46169a7b559..6ffd6db5bb0 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -80,7 +80,7 @@ enum { }; #include <asm/posix_types.h> /* for __kernel_old_dev_t */ -#include <asm/types.h> /* for __u64 */ +#include <linux/types.h> /* for __u64 */ /* Backwards compatibility version */ struct loop_info { diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index e794dfb8750..97ffdc1d344 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -57,20 +57,21 @@ #define FLG_L2DATA 14 /* channel use L2 DATA primitivs */ #define FLG_ORIGIN 15 /* channel is on origin site */ /* channel specific stuff */ +#define FLG_FILLEMPTY 16 /* fill fifo on first frame (empty) */ /* arcofi specific */ -#define FLG_ARCOFI_TIMER 16 -#define FLG_ARCOFI_ERROR 17 +#define FLG_ARCOFI_TIMER 17 +#define FLG_ARCOFI_ERROR 18 /* isar specific */ -#define FLG_INITIALIZED 16 -#define FLG_DLEETX 17 -#define FLG_LASTDLE 18 -#define FLG_FIRST 19 -#define FLG_LASTDATA 20 -#define FLG_NMD_DATA 21 -#define FLG_FTI_RUN 22 -#define FLG_LL_OK 23 -#define FLG_LL_CONN 24 -#define FLG_DTMFSEND 25 +#define FLG_INITIALIZED 17 +#define FLG_DLEETX 18 +#define FLG_LASTDLE 19 +#define FLG_FIRST 20 +#define FLG_LASTDATA 21 +#define FLG_NMD_DATA 22 +#define FLG_FTI_RUN 23 +#define FLG_LL_OK 24 +#define FLG_LL_CONN 25 +#define FLG_DTMFSEND 26 /* workq events */ #define FLG_RECVQUEUE 30 @@ -183,6 +184,7 @@ extern void queue_ch_frame(struct mISDNchannel *, u_int, extern int dchannel_senddata(struct dchannel *, struct sk_buff *); extern int bchannel_senddata(struct bchannel *, struct sk_buff *); extern void recv_Dchannel(struct dchannel *); +extern void recv_Echannel(struct dchannel *, struct dchannel *); extern void recv_Bchannel(struct bchannel *); extern void recv_Dchannel_skb(struct dchannel *, struct sk_buff *); extern void recv_Bchannel_skb(struct bchannel *, struct sk_buff *); diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 8f2d60da04e..5da3d95b27f 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -36,8 +36,8 @@ * - should be incremented on every checkin */ #define MISDN_MAJOR_VERSION 1 -#define MISDN_MINOR_VERSION 0 -#define MISDN_RELEASE 19 +#define MISDN_MINOR_VERSION 1 +#define MISDN_RELEASE 20 /* primitives for information exchange * generell format @@ -80,6 +80,7 @@ #define PH_DEACTIVATE_IND 0x0202 #define PH_DEACTIVATE_CNF 0x4202 #define PH_DATA_IND 0x2002 +#define PH_DATA_E_IND 0x3002 #define MPH_ACTIVATE_IND 0x0502 #define MPH_DEACTIVATE_IND 0x0602 #define MPH_INFORMATION_IND 0x0702 @@ -199,6 +200,18 @@ #define ISDN_P_NT_S0 0x02 #define ISDN_P_TE_E1 0x03 #define ISDN_P_NT_E1 0x04 +#define ISDN_P_TE_UP0 0x05 +#define ISDN_P_NT_UP0 0x06 + +#define IS_ISDN_P_TE(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_TE_E1) || \ + (p == ISDN_P_TE_UP0) || (p == ISDN_P_LAPD_TE)) +#define IS_ISDN_P_NT(p) ((p == ISDN_P_NT_S0) || (p == ISDN_P_NT_E1) || \ + (p == ISDN_P_NT_UP0) || (p == ISDN_P_LAPD_NT)) +#define IS_ISDN_P_S0(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_NT_S0)) +#define IS_ISDN_P_E1(p) ((p == ISDN_P_TE_E1) || (p == ISDN_P_NT_E1)) +#define IS_ISDN_P_UP0(p) ((p == ISDN_P_TE_UP0) || (p == ISDN_P_NT_UP0)) + + #define ISDN_P_LAPD_TE 0x10 #define ISDN_P_LAPD_NT 0x11 @@ -255,16 +268,6 @@ struct sockaddr_mISDN { unsigned char tei; }; -/* timer device ioctl */ -#define IMADDTIMER _IOR('I', 64, int) -#define IMDELTIMER _IOR('I', 65, int) -/* socket ioctls */ -#define IMGETVERSION _IOR('I', 66, int) -#define IMGETCOUNT _IOR('I', 67, int) -#define IMGETDEVINFO _IOR('I', 68, int) -#define IMCTRLREQ _IOR('I', 69, int) -#define IMCLEAR_L2 _IOR('I', 70, int) - struct mISDNversion { unsigned char major; unsigned char minor; @@ -281,6 +284,40 @@ struct mISDN_devinfo { char name[MISDN_MAX_IDLEN]; }; +struct mISDN_devrename { + u_int id; + char name[MISDN_MAX_IDLEN]; /* new name */ +}; + +/* MPH_INFORMATION_REQ payload */ +struct ph_info_ch { + __u32 protocol; + __u64 Flags; +}; + +struct ph_info_dch { + struct ph_info_ch ch; + __u16 state; + __u16 num_bch; +}; + +struct ph_info { + struct ph_info_dch dch; + struct ph_info_ch bch[]; +}; + +/* timer device ioctl */ +#define IMADDTIMER _IOR('I', 64, int) +#define IMDELTIMER _IOR('I', 65, int) + +/* socket ioctls */ +#define IMGETVERSION _IOR('I', 66, int) +#define IMGETCOUNT _IOR('I', 67, int) +#define IMGETDEVINFO _IOR('I', 68, int) +#define IMCTRLREQ _IOR('I', 69, int) +#define IMCLEAR_L2 _IOR('I', 70, int) +#define IMSETDEVNAME _IOR('I', 71, struct mISDN_devrename) + static inline int test_channelmap(u_int nr, u_char *map) { @@ -312,6 +349,8 @@ clear_channelmap(u_int nr, u_char *map) #define MISDN_CTRL_SETPEER 0x0040 #define MISDN_CTRL_UNSETPEER 0x0080 #define MISDN_CTRL_RX_OFF 0x0100 +#define MISDN_CTRL_FILL_EMPTY 0x0200 +#define MISDN_CTRL_GETPEER 0x0400 #define MISDN_CTRL_HW_FEATURES_OP 0x2000 #define MISDN_CTRL_HW_FEATURES 0x2001 #define MISDN_CTRL_HFC_OP 0x4000 @@ -362,6 +401,7 @@ struct mISDN_ctrl_req { #define DEBUG_L2_TEI 0x00100000 #define DEBUG_L2_TEIFSM 0x00200000 #define DEBUG_TIMER 0x01000000 +#define DEBUG_CLOCK 0x02000000 #define mISDN_HEAD_P(s) ((struct mISDNhead *)&s->cb[0]) #define mISDN_HEAD_PRIM(s) (((struct mISDNhead *)&s->cb[0])->prim) @@ -375,6 +415,7 @@ struct mISDN_ctrl_req { struct mISDNchannel; struct mISDNdevice; struct mISDNstack; +struct mISDNclock; struct channel_req { u_int protocol; @@ -423,7 +464,6 @@ struct mISDN_sock { struct mISDNdevice { struct mISDNchannel D; u_int id; - char name[MISDN_MAX_IDLEN]; u_int Dprotocols; u_int Bprotocols; u_int nrbchan; @@ -452,6 +492,16 @@ struct mISDNstack { #endif }; +typedef int (clockctl_func_t)(void *, int); + +struct mISDNclock { + struct list_head list; + char name[64]; + int pri; + clockctl_func_t *ctl; + void *priv; +}; + /* global alloc/queue functions */ static inline struct sk_buff * @@ -498,12 +548,26 @@ _queue_data(struct mISDNchannel *ch, u_int prim, /* global register/unregister functions */ -extern int mISDN_register_device(struct mISDNdevice *, char *name); +extern int mISDN_register_device(struct mISDNdevice *, + struct device *parent, char *name); extern void mISDN_unregister_device(struct mISDNdevice *); extern int mISDN_register_Bprotocol(struct Bprotocol *); extern void mISDN_unregister_Bprotocol(struct Bprotocol *); +extern struct mISDNclock *mISDN_register_clock(char *, int, clockctl_func_t *, + void *); +extern void mISDN_unregister_clock(struct mISDNclock *); + +static inline struct mISDNdevice *dev_to_mISDN(struct device *dev) +{ + if (dev) + return dev_get_drvdata(dev); + else + return NULL; +} extern void set_channel_address(struct mISDNchannel *, u_int, u_int); +extern void mISDN_clock_update(struct mISDNclock *, int, struct timeval *); +extern unsigned short mISDN_clock_get(void); #endif /* __KERNEL__ */ #endif /* mISDNIF_H */ diff --git a/include/linux/magic.h b/include/linux/magic.h index f7f3fdddbef..0b4df7eba85 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -10,10 +10,13 @@ #define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 #define TMPFS_MAGIC 0x01021994 +#define SQUASHFS_MAGIC 0x73717368 #define EFS_SUPER_MAGIC 0x414A53 #define EXT2_SUPER_MAGIC 0xEF53 #define EXT3_SUPER_MAGIC 0xEF53 +#define XENFS_SUPER_MAGIC 0xabba1974 #define EXT4_SUPER_MAGIC 0xEF53 +#define BTRFS_SUPER_MAGIC 0x9123683E #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h index ae5b0949306..404f678e734 100644 --- a/include/linux/matroxfb.h +++ b/include/linux/matroxfb.h @@ -2,7 +2,7 @@ #define __LINUX_MATROXFB_H__ #include <asm/ioctl.h> -#include <asm/types.h> +#include <linux/types.h> #include <linux/videodev2.h> struct matroxioc_output_mode { diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 1fbe14d3952..326f45c8653 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -19,22 +19,45 @@ #ifndef _LINUX_MEMCONTROL_H #define _LINUX_MEMCONTROL_H - +#include <linux/cgroup.h> struct mem_cgroup; struct page_cgroup; struct page; struct mm_struct; #ifdef CONFIG_CGROUP_MEM_RES_CTLR +/* + * All "charge" functions with gfp_mask should use GFP_KERNEL or + * (gfp_mask & GFP_RECLAIM_MASK). In current implementatin, memcg doesn't + * alloc memory but reclaims memory from all available zones. So, "where I want + * memory from" bits of gfp_mask has no meaning. So any bits of that field is + * available but adding a rule is better. charge functions' gfp_mask should + * be set to GFP_KERNEL or gfp_mask & GFP_RECLAIM_MASK for avoiding ambiguous + * codes. + * (Of course, if memcg does memory allocation in future, GFP_KERNEL is sane.) + */ -extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm, +extern int mem_cgroup_newpage_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); +/* for swap handling */ +extern int mem_cgroup_try_charge_swapin(struct mm_struct *mm, + struct page *page, gfp_t mask, struct mem_cgroup **ptr); +extern void mem_cgroup_commit_charge_swapin(struct page *page, + struct mem_cgroup *ptr); +extern void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *ptr); + extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); -extern void mem_cgroup_move_lists(struct page *page, enum lru_list lru); +extern void mem_cgroup_add_lru_list(struct page *page, enum lru_list lru); +extern void mem_cgroup_del_lru_list(struct page *page, enum lru_list lru); +extern void mem_cgroup_rotate_lru_list(struct page *page, enum lru_list lru); +extern void mem_cgroup_del_lru(struct page *page); +extern void mem_cgroup_move_lists(struct page *page, + enum lru_list from, enum lru_list to); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask); +extern int mem_cgroup_shrink_usage(struct page *page, + struct mm_struct *mm, gfp_t gfp_mask); extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, struct list_head *dst, @@ -47,12 +70,20 @@ int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem); extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p); -#define mm_match_cgroup(mm, cgroup) \ - ((cgroup) == mem_cgroup_from_task((mm)->owner)) +static inline +int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup) +{ + struct mem_cgroup *mem; + rcu_read_lock(); + mem = mem_cgroup_from_task((mm)->owner); + rcu_read_unlock(); + return cgroup == mem; +} extern int -mem_cgroup_prepare_migration(struct page *page, struct page *newpage); -extern void mem_cgroup_end_migration(struct page *page); +mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr); +extern void mem_cgroup_end_migration(struct mem_cgroup *mem, + struct page *oldpage, struct page *newpage); /* * For memory reclaim. @@ -65,13 +96,32 @@ extern void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem, int priority); extern void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem, int priority); +int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg); +unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg, + struct zone *zone, + enum lru_list lru); +struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg, + struct zone *zone); +struct zone_reclaim_stat* +mem_cgroup_get_reclaim_stat_from_page(struct page *page); -extern long mem_cgroup_calc_reclaim(struct mem_cgroup *mem, struct zone *zone, - int priority, enum lru_list lru); +#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +extern int do_swap_account; +#endif +static inline bool mem_cgroup_disabled(void) +{ + if (mem_cgroup_subsys.disabled) + return true; + return false; +} + +extern bool mem_cgroup_oom_called(struct task_struct *task); #else /* CONFIG_CGROUP_MEM_RES_CTLR */ -static inline int mem_cgroup_charge(struct page *page, +struct mem_cgroup; + +static inline int mem_cgroup_newpage_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { return 0; @@ -83,6 +133,21 @@ static inline int mem_cgroup_cache_charge(struct page *page, return 0; } +static inline int mem_cgroup_try_charge_swapin(struct mm_struct *mm, + struct page *page, gfp_t gfp_mask, struct mem_cgroup **ptr) +{ + return 0; +} + +static inline void mem_cgroup_commit_charge_swapin(struct page *page, + struct mem_cgroup *ptr) +{ +} + +static inline void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *ptr) +{ +} + static inline void mem_cgroup_uncharge_page(struct page *page) { } @@ -91,12 +156,33 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page) { } -static inline int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask) +static inline int mem_cgroup_shrink_usage(struct page *page, + struct mm_struct *mm, gfp_t gfp_mask) { return 0; } -static inline void mem_cgroup_move_lists(struct page *page, bool active) +static inline void mem_cgroup_add_lru_list(struct page *page, int lru) +{ +} + +static inline void mem_cgroup_del_lru_list(struct page *page, int lru) +{ + return ; +} + +static inline void mem_cgroup_rotate_lru_list(struct page *page, int lru) +{ + return ; +} + +static inline void mem_cgroup_del_lru(struct page *page) +{ + return ; +} + +static inline void +mem_cgroup_move_lists(struct page *page, enum lru_list from, enum lru_list to) { } @@ -112,12 +198,14 @@ static inline int task_in_mem_cgroup(struct task_struct *task, } static inline int -mem_cgroup_prepare_migration(struct page *page, struct page *newpage) +mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr) { return 0; } -static inline void mem_cgroup_end_migration(struct page *page) +static inline void mem_cgroup_end_migration(struct mem_cgroup *mem, + struct page *oldpage, + struct page *newpage) { } @@ -146,12 +234,42 @@ static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem, { } -static inline long mem_cgroup_calc_reclaim(struct mem_cgroup *mem, - struct zone *zone, int priority, - enum lru_list lru) +static inline bool mem_cgroup_disabled(void) +{ + return true; +} + +static inline bool mem_cgroup_oom_called(struct task_struct *task) +{ + return false; +} + +static inline int +mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg) +{ + return 1; +} + +static inline unsigned long +mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg, struct zone *zone, + enum lru_list lru) { return 0; } + + +static inline struct zone_reclaim_stat* +mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg, struct zone *zone) +{ + return NULL; +} + +static inline struct zone_reclaim_stat* +mem_cgroup_get_reclaim_stat_from_page(struct page *page) +{ + return NULL; +} + #endif /* CONFIG_CGROUP_MEM_CONT */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/memstick.h b/include/linux/memstick.h index d0c37e68223..690c35a9d4c 100644 --- a/include/linux/memstick.h +++ b/include/linux/memstick.h @@ -100,8 +100,8 @@ struct mspro_param_register { #define MEMSTICK_SYS_PAR8 0x40 #define MEMSTICK_SYS_SERIAL 0x80 - unsigned short data_count; - unsigned int data_address; + __be16 data_count; + __be32 data_address; unsigned char tpc_param; } __attribute__((packed)); diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h new file mode 100644 index 00000000000..56669b4183a --- /dev/null +++ b/include/linux/mfd/pcf50633/adc.h @@ -0,0 +1,72 @@ +/* + * adc.h -- Driver for NXP PCF50633 ADC + * + * (C) 2006-2008 by Openmoko, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_MFD_PCF50633_ADC_H +#define __LINUX_MFD_PCF50633_ADC_H + +#include <linux/mfd/pcf50633/core.h> +#include <linux/platform_device.h> + +/* ADC Registers */ +#define PCF50633_REG_ADCC3 0x52 +#define PCF50633_REG_ADCC2 0x53 +#define PCF50633_REG_ADCC1 0x54 +#define PCF50633_REG_ADCS1 0x55 +#define PCF50633_REG_ADCS2 0x56 +#define PCF50633_REG_ADCS3 0x57 + +#define PCF50633_ADCC1_ADCSTART 0x01 +#define PCF50633_ADCC1_RES_10BIT 0x02 +#define PCF50633_ADCC1_AVERAGE_NO 0x00 +#define PCF50633_ADCC1_AVERAGE_4 0x04 +#define PCF50633_ADCC1_AVERAGE_8 0x08 +#define PCF50633_ADCC1_AVERAGE_16 0x0c +#define PCF50633_ADCC1_MUX_BATSNS_RES 0x00 +#define PCF50633_ADCC1_MUX_BATSNS_SUBTR 0x10 +#define PCF50633_ADCC1_MUX_ADCIN2_RES 0x20 +#define PCF50633_ADCC1_MUX_ADCIN2_SUBTR 0x30 +#define PCF50633_ADCC1_MUX_BATTEMP 0x60 +#define PCF50633_ADCC1_MUX_ADCIN1 0x70 +#define PCF50633_ADCC1_AVERAGE_MASK 0x0c +#define PCF50633_ADCC1_ADCMUX_MASK 0xf0 + +#define PCF50633_ADCC2_RATIO_NONE 0x00 +#define PCF50633_ADCC2_RATIO_BATTEMP 0x01 +#define PCF50633_ADCC2_RATIO_ADCIN1 0x02 +#define PCF50633_ADCC2_RATIO_BOTH 0x03 +#define PCF50633_ADCC2_RATIOSETTL_100US 0x04 + +#define PCF50633_ADCC3_ACCSW_EN 0x01 +#define PCF50633_ADCC3_NTCSW_EN 0x04 +#define PCF50633_ADCC3_RES_DIV_TWO 0x10 +#define PCF50633_ADCC3_RES_DIV_THREE 0x00 + +#define PCF50633_ADCS3_REF_NTCSW 0x00 +#define PCF50633_ADCS3_REF_ACCSW 0x10 +#define PCF50633_ADCS3_REF_2V0 0x20 +#define PCF50633_ADCS3_REF_VISA 0x30 +#define PCF50633_ADCS3_REF_2V0_2 0x70 +#define PCF50633_ADCS3_ADCRDY 0x80 + +#define PCF50633_ADCS3_ADCDAT1L_MASK 0x03 +#define PCF50633_ADCS3_ADCDAT2L_MASK 0x0c +#define PCF50633_ADCS3_ADCDAT2L_SHIFT 2 +#define PCF50633_ASCS3_REF_MASK 0x70 + +extern int +pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg, + void (*callback)(struct pcf50633 *, void *, int), + void *callback_param); +extern int +pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg); + +#endif /* __LINUX_PCF50633_ADC_H */ diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h new file mode 100644 index 00000000000..4455b212d75 --- /dev/null +++ b/include/linux/mfd/pcf50633/core.h @@ -0,0 +1,218 @@ +/* + * core.h -- Core driver for NXP PCF50633 + * + * (C) 2006-2008 by Openmoko, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_MFD_PCF50633_CORE_H +#define __LINUX_MFD_PCF50633_CORE_H + +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/power_supply.h> + +struct pcf50633; + +#define PCF50633_NUM_REGULATORS 11 + +struct pcf50633_platform_data { + struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS]; + + char **batteries; + int num_batteries; + + /* Callbacks */ + void (*probe_done)(struct pcf50633 *); + void (*mbc_event_callback)(struct pcf50633 *, int); + void (*regulator_registered)(struct pcf50633 *, int); + void (*force_shutdown)(struct pcf50633 *); + + u8 resumers[5]; +}; + +struct pcf50633_subdev_pdata { + struct pcf50633 *pcf; +}; + +struct pcf50633_irq { + void (*handler) (int, void *); + void *data; +}; + +int pcf50633_register_irq(struct pcf50633 *pcf, int irq, + void (*handler) (int, void *), void *data); +int pcf50633_free_irq(struct pcf50633 *pcf, int irq); + +int pcf50633_irq_mask(struct pcf50633 *pcf, int irq); +int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq); +int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq); + +int pcf50633_read_block(struct pcf50633 *, u8 reg, + int nr_regs, u8 *data); +int pcf50633_write_block(struct pcf50633 *pcf, u8 reg, + int nr_regs, u8 *data); +u8 pcf50633_reg_read(struct pcf50633 *, u8 reg); +int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val); + +int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val); +int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits); + +/* Interrupt registers */ + +#define PCF50633_REG_INT1 0x02 +#define PCF50633_REG_INT2 0x03 +#define PCF50633_REG_INT3 0x04 +#define PCF50633_REG_INT4 0x05 +#define PCF50633_REG_INT5 0x06 + +#define PCF50633_REG_INT1M 0x07 +#define PCF50633_REG_INT2M 0x08 +#define PCF50633_REG_INT3M 0x09 +#define PCF50633_REG_INT4M 0x0a +#define PCF50633_REG_INT5M 0x0b + +enum { + /* Chip IRQs */ + PCF50633_IRQ_ADPINS, + PCF50633_IRQ_ADPREM, + PCF50633_IRQ_USBINS, + PCF50633_IRQ_USBREM, + PCF50633_IRQ_RESERVED1, + PCF50633_IRQ_RESERVED2, + PCF50633_IRQ_ALARM, + PCF50633_IRQ_SECOND, + PCF50633_IRQ_ONKEYR, + PCF50633_IRQ_ONKEYF, + PCF50633_IRQ_EXTON1R, + PCF50633_IRQ_EXTON1F, + PCF50633_IRQ_EXTON2R, + PCF50633_IRQ_EXTON2F, + PCF50633_IRQ_EXTON3R, + PCF50633_IRQ_EXTON3F, + PCF50633_IRQ_BATFULL, + PCF50633_IRQ_CHGHALT, + PCF50633_IRQ_THLIMON, + PCF50633_IRQ_THLIMOFF, + PCF50633_IRQ_USBLIMON, + PCF50633_IRQ_USBLIMOFF, + PCF50633_IRQ_ADCRDY, + PCF50633_IRQ_ONKEY1S, + PCF50633_IRQ_LOWSYS, + PCF50633_IRQ_LOWBAT, + PCF50633_IRQ_HIGHTMP, + PCF50633_IRQ_AUTOPWRFAIL, + PCF50633_IRQ_DWN1PWRFAIL, + PCF50633_IRQ_DWN2PWRFAIL, + PCF50633_IRQ_LEDPWRFAIL, + PCF50633_IRQ_LEDOVP, + PCF50633_IRQ_LDO1PWRFAIL, + PCF50633_IRQ_LDO2PWRFAIL, + PCF50633_IRQ_LDO3PWRFAIL, + PCF50633_IRQ_LDO4PWRFAIL, + PCF50633_IRQ_LDO5PWRFAIL, + PCF50633_IRQ_LDO6PWRFAIL, + PCF50633_IRQ_HCLDOPWRFAIL, + PCF50633_IRQ_HCLDOOVL, + + /* Always last */ + PCF50633_NUM_IRQ, +}; + +struct pcf50633 { + struct device *dev; + struct i2c_client *i2c_client; + + struct pcf50633_platform_data *pdata; + int irq; + struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ]; + struct work_struct irq_work; + struct mutex lock; + + u8 mask_regs[5]; + + u8 suspend_irq_masks[5]; + u8 resume_reason[5]; + int is_suspended; + + int onkey1s_held; + + struct platform_device *rtc_pdev; + struct platform_device *mbc_pdev; + struct platform_device *adc_pdev; + struct platform_device *input_pdev; + struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS]; +}; + +enum pcf50633_reg_int1 { + PCF50633_INT1_ADPINS = 0x01, /* Adapter inserted */ + PCF50633_INT1_ADPREM = 0x02, /* Adapter removed */ + PCF50633_INT1_USBINS = 0x04, /* USB inserted */ + PCF50633_INT1_USBREM = 0x08, /* USB removed */ + /* reserved */ + PCF50633_INT1_ALARM = 0x40, /* RTC alarm time is reached */ + PCF50633_INT1_SECOND = 0x80, /* RTC periodic second interrupt */ +}; + +enum pcf50633_reg_int2 { + PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */ + PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */ + PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */ + PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */ + PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */ + PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */ + PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */ + PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */ +}; + +enum pcf50633_reg_int3 { + PCF50633_INT3_BATFULL = 0x01, /* Battery full */ + PCF50633_INT3_CHGHALT = 0x02, /* Charger halt */ + PCF50633_INT3_THLIMON = 0x04, + PCF50633_INT3_THLIMOFF = 0x08, + PCF50633_INT3_USBLIMON = 0x10, + PCF50633_INT3_USBLIMOFF = 0x20, + PCF50633_INT3_ADCRDY = 0x40, /* ADC result ready */ + PCF50633_INT3_ONKEY1S = 0x80, /* ONKEY pressed 1 second */ +}; + +enum pcf50633_reg_int4 { + PCF50633_INT4_LOWSYS = 0x01, + PCF50633_INT4_LOWBAT = 0x02, + PCF50633_INT4_HIGHTMP = 0x04, + PCF50633_INT4_AUTOPWRFAIL = 0x08, + PCF50633_INT4_DWN1PWRFAIL = 0x10, + PCF50633_INT4_DWN2PWRFAIL = 0x20, + PCF50633_INT4_LEDPWRFAIL = 0x40, + PCF50633_INT4_LEDOVP = 0x80, +}; + +enum pcf50633_reg_int5 { + PCF50633_INT5_LDO1PWRFAIL = 0x01, + PCF50633_INT5_LDO2PWRFAIL = 0x02, + PCF50633_INT5_LDO3PWRFAIL = 0x04, + PCF50633_INT5_LDO4PWRFAIL = 0x08, + PCF50633_INT5_LDO5PWRFAIL = 0x10, + PCF50633_INT5_LDO6PWRFAIL = 0x20, + PCF50633_INT5_HCLDOPWRFAIL = 0x40, + PCF50633_INT5_HCLDOOVL = 0x80, +}; + +/* misc. registers */ +#define PCF50633_REG_OOCSHDWN 0x0c + +/* LED registers */ +#define PCF50633_REG_LEDOUT 0x28 +#define PCF50633_REG_LEDENA 0x29 +#define PCF50633_REG_LEDCTL 0x2a +#define PCF50633_REG_LEDDIM 0x2b + +#endif + diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h new file mode 100644 index 00000000000..a42b845efc5 --- /dev/null +++ b/include/linux/mfd/pcf50633/gpio.h @@ -0,0 +1,52 @@ +/* + * gpio.h -- GPIO driver for NXP PCF50633 + * + * (C) 2006-2008 by Openmoko, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_MFD_PCF50633_GPIO_H +#define __LINUX_MFD_PCF50633_GPIO_H + +#include <linux/mfd/pcf50633/core.h> + +#define PCF50633_GPIO1 1 +#define PCF50633_GPIO2 2 +#define PCF50633_GPIO3 3 +#define PCF50633_GPO 4 + +#define PCF50633_REG_GPIO1CFG 0x14 +#define PCF50633_REG_GPIO2CFG 0x15 +#define PCF50633_REG_GPIO3CFG 0x16 +#define PCF50633_REG_GPOCFG 0x17 + +#define PCF50633_GPOCFG_GPOSEL_MASK 0x07 + +enum pcf50633_reg_gpocfg { + PCF50633_GPOCFG_GPOSEL_0 = 0x00, + PCF50633_GPOCFG_GPOSEL_LED_NFET = 0x01, + PCF50633_GPOCFG_GPOSEL_SYSxOK = 0x02, + PCF50633_GPOCFG_GPOSEL_CLK32K = 0x03, + PCF50633_GPOCFG_GPOSEL_ADAPUSB = 0x04, + PCF50633_GPOCFG_GPOSEL_USBxOK = 0x05, + PCF50633_GPOCFG_GPOSEL_ACTPH4 = 0x06, + PCF50633_GPOCFG_GPOSEL_1 = 0x07, + PCF50633_GPOCFG_GPOSEL_INVERSE = 0x08, +}; + +int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val); +u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio); + +int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert); +int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio); + +int pcf50633_gpio_power_supply_set(struct pcf50633 *, + int gpio, int regulator, int on); +#endif /* __LINUX_MFD_PCF50633_GPIO_H */ + + diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h new file mode 100644 index 00000000000..6e17619b773 --- /dev/null +++ b/include/linux/mfd/pcf50633/mbc.h @@ -0,0 +1,134 @@ +/* + * mbc.h -- Driver for NXP PCF50633 Main Battery Charger + * + * (C) 2006-2008 by Openmoko, Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_MFD_PCF50633_MBC_H +#define __LINUX_MFD_PCF50633_MBC_H + +#include <linux/mfd/pcf50633/core.h> +#include <linux/platform_device.h> + +#define PCF50633_REG_MBCC1 0x43 +#define PCF50633_REG_MBCC2 0x44 +#define PCF50633_REG_MBCC3 0x45 +#define PCF50633_REG_MBCC4 0x46 +#define PCF50633_REG_MBCC5 0x47 +#define PCF50633_REG_MBCC6 0x48 +#define PCF50633_REG_MBCC7 0x49 +#define PCF50633_REG_MBCC8 0x4a +#define PCF50633_REG_MBCS1 0x4b +#define PCF50633_REG_MBCS2 0x4c +#define PCF50633_REG_MBCS3 0x4d + +enum pcf50633_reg_mbcc1 { + PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */ + PCF50633_MBCC1_AUTOSTOP = 0x02, + PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */ + PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */ + PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ + PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */ + PCF50633_MBCC1_WDTIME_1H = 0x00, + PCF50633_MBCC1_WDTIME_2H = 0x40, + PCF50633_MBCC1_WDTIME_4H = 0x80, + PCF50633_MBCC1_WDTIME_6H = 0xc0, +}; +#define PCF50633_MBCC1_WDTIME_MASK 0xc0 + +enum pcf50633_reg_mbcc2 { + PCF50633_MBCC2_VBATCOND_2V7 = 0x00, + PCF50633_MBCC2_VBATCOND_2V85 = 0x01, + PCF50633_MBCC2_VBATCOND_3V0 = 0x02, + PCF50633_MBCC2_VBATCOND_3V15 = 0x03, + PCF50633_MBCC2_VMAX_4V = 0x00, + PCF50633_MBCC2_VMAX_4V20 = 0x28, + PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */ +}; + +enum pcf50633_reg_mbcc7 { + PCF50633_MBCC7_USB_100mA = 0x00, + PCF50633_MBCC7_USB_500mA = 0x01, + PCF50633_MBCC7_USB_1000mA = 0x02, + PCF50633_MBCC7_USB_SUSPEND = 0x03, + PCF50633_MBCC7_BATTEMP_EN = 0x04, + PCF50633_MBCC7_BATSYSIMAX_1A6 = 0x00, + PCF50633_MBCC7_BATSYSIMAX_1A8 = 0x40, + PCF50633_MBCC7_BATSYSIMAX_2A0 = 0x80, + PCF50633_MBCC7_BATSYSIMAX_2A2 = 0xc0, +}; +#define PCF50633_MBCC7_USB_MASK 0x03 + +enum pcf50633_reg_mbcc8 { + PCF50633_MBCC8_USBENASUS = 0x10, +}; + +enum pcf50633_reg_mbcs1 { + PCF50633_MBCS1_USBPRES = 0x01, + PCF50633_MBCS1_USBOK = 0x02, + PCF50633_MBCS1_ADAPTPRES = 0x04, + PCF50633_MBCS1_ADAPTOK = 0x08, + PCF50633_MBCS1_TBAT_OK = 0x00, + PCF50633_MBCS1_TBAT_ABOVE = 0x10, + PCF50633_MBCS1_TBAT_BELOW = 0x20, + PCF50633_MBCS1_TBAT_UNDEF = 0x30, + PCF50633_MBCS1_PREWDTEXP = 0x40, + PCF50633_MBCS1_WDTEXP = 0x80, +}; + +enum pcf50633_reg_mbcs2_mbcmod { + PCF50633_MBCS2_MBC_PLAY = 0x00, + PCF50633_MBCS2_MBC_USB_PRE = 0x01, + PCF50633_MBCS2_MBC_USB_PRE_WAIT = 0x02, + PCF50633_MBCS2_MBC_USB_FAST = 0x03, + PCF50633_MBCS2_MBC_USB_FAST_WAIT = 0x04, + PCF50633_MBCS2_MBC_USB_SUSPEND = 0x05, + PCF50633_MBCS2_MBC_ADP_PRE = 0x06, + PCF50633_MBCS2_MBC_ADP_PRE_WAIT = 0x07, + PCF50633_MBCS2_MBC_ADP_FAST = 0x08, + PCF50633_MBCS2_MBC_ADP_FAST_WAIT = 0x09, + PCF50633_MBCS2_MBC_BAT_FULL = 0x0a, + PCF50633_MBCS2_MBC_HALT = 0x0b, +}; +#define PCF50633_MBCS2_MBC_MASK 0x0f +enum pcf50633_reg_mbcs2_chgstat { + PCF50633_MBCS2_CHGS_NONE = 0x00, + PCF50633_MBCS2_CHGS_ADAPTER = 0x10, + PCF50633_MBCS2_CHGS_USB = 0x20, + PCF50633_MBCS2_CHGS_BOTH = 0x30, +}; +#define PCF50633_MBCS2_RESSTAT_AUTO 0x40 + +enum pcf50633_reg_mbcs3 { + PCF50633_MBCS3_USBLIM_PLAY = 0x01, + PCF50633_MBCS3_USBLIM_CGH = 0x02, + PCF50633_MBCS3_TLIM_PLAY = 0x04, + PCF50633_MBCS3_TLIM_CHG = 0x08, + PCF50633_MBCS3_ILIM = 0x10, /* 1: Ibat > Icutoff */ + PCF50633_MBCS3_VLIM = 0x20, /* 1: Vbat == Vmax */ + PCF50633_MBCS3_VBATSTAT = 0x40, /* 1: Vbat > Vbatcond */ + PCF50633_MBCS3_VRES = 0x80, /* 1: Vbat > Vth(RES) */ +}; + +#define PCF50633_MBCC2_VBATCOND_MASK 0x03 +#define PCF50633_MBCC2_VMAX_MASK 0x3c + +/* Charger status */ +#define PCF50633_MBC_USB_ONLINE 0x01 +#define PCF50633_MBC_USB_ACTIVE 0x02 +#define PCF50633_MBC_ADAPTER_ONLINE 0x04 +#define PCF50633_MBC_ADAPTER_ACTIVE 0x08 + +int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); + +int pcf50633_mbc_get_status(struct pcf50633 *); +void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); + +#endif + diff --git a/include/linux/mfd/pcf50633/pmic.h b/include/linux/mfd/pcf50633/pmic.h new file mode 100644 index 00000000000..2d3dbe53b23 --- /dev/null +++ b/include/linux/mfd/pcf50633/pmic.h @@ -0,0 +1,67 @@ +#ifndef __LINUX_MFD_PCF50633_PMIC_H +#define __LINUX_MFD_PCF50633_PMIC_H + +#include <linux/mfd/pcf50633/core.h> +#include <linux/platform_device.h> + +#define PCF50633_REG_AUTOOUT 0x1a +#define PCF50633_REG_AUTOENA 0x1b +#define PCF50633_REG_AUTOCTL 0x1c +#define PCF50633_REG_AUTOMXC 0x1d +#define PCF50633_REG_DOWN1OUT 0x1e +#define PCF50633_REG_DOWN1ENA 0x1f +#define PCF50633_REG_DOWN1CTL 0x20 +#define PCF50633_REG_DOWN1MXC 0x21 +#define PCF50633_REG_DOWN2OUT 0x22 +#define PCF50633_REG_DOWN2ENA 0x23 +#define PCF50633_REG_DOWN2CTL 0x24 +#define PCF50633_REG_DOWN2MXC 0x25 +#define PCF50633_REG_MEMLDOOUT 0x26 +#define PCF50633_REG_MEMLDOENA 0x27 +#define PCF50633_REG_LDO1OUT 0x2d +#define PCF50633_REG_LDO1ENA 0x2e +#define PCF50633_REG_LDO2OUT 0x2f +#define PCF50633_REG_LDO2ENA 0x30 +#define PCF50633_REG_LDO3OUT 0x31 +#define PCF50633_REG_LDO3ENA 0x32 +#define PCF50633_REG_LDO4OUT 0x33 +#define PCF50633_REG_LDO4ENA 0x34 +#define PCF50633_REG_LDO5OUT 0x35 +#define PCF50633_REG_LDO5ENA 0x36 +#define PCF50633_REG_LDO6OUT 0x37 +#define PCF50633_REG_LDO6ENA 0x38 +#define PCF50633_REG_HCLDOOUT 0x39 +#define PCF50633_REG_HCLDOENA 0x3a +#define PCF50633_REG_HCLDOOVL 0x40 + +enum pcf50633_regulator_enable { + PCF50633_REGULATOR_ON = 0x01, + PCF50633_REGULATOR_ON_GPIO1 = 0x02, + PCF50633_REGULATOR_ON_GPIO2 = 0x04, + PCF50633_REGULATOR_ON_GPIO3 = 0x08, +}; +#define PCF50633_REGULATOR_ON_MASK 0x0f + +enum pcf50633_regulator_phase { + PCF50633_REGULATOR_ACTPH1 = 0x00, + PCF50633_REGULATOR_ACTPH2 = 0x10, + PCF50633_REGULATOR_ACTPH3 = 0x20, + PCF50633_REGULATOR_ACTPH4 = 0x30, +}; +#define PCF50633_REGULATOR_ACTPH_MASK 0x30 + +enum pcf50633_regulator_id { + PCF50633_REGULATOR_AUTO, + PCF50633_REGULATOR_DOWN1, + PCF50633_REGULATOR_DOWN2, + PCF50633_REGULATOR_LDO1, + PCF50633_REGULATOR_LDO2, + PCF50633_REGULATOR_LDO3, + PCF50633_REGULATOR_LDO4, + PCF50633_REGULATOR_LDO5, + PCF50633_REGULATOR_LDO6, + PCF50633_REGULATOR_HCLDO, + PCF50633_REGULATOR_MEMLDO, +}; +#endif + diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index 96acbfc8aa1..be3264e286e 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -13,6 +13,10 @@ #ifndef __LINUX_MFD_WM8350_PMIC_H #define __LINUX_MFD_WM8350_PMIC_H +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/regulator/machine.h> + /* * Register values. */ @@ -700,6 +704,33 @@ struct wm8350; struct platform_device; struct regulator_init_data; +/* + * WM8350 LED platform data + */ +struct wm8350_led_platform_data { + const char *name; + const char *default_trigger; + int max_uA; +}; + +struct wm8350_led { + struct platform_device *pdev; + struct mutex mutex; + struct work_struct work; + spinlock_t value_lock; + enum led_brightness value; + struct led_classdev cdev; + int max_uA_index; + int enabled; + + struct regulator *isink; + struct regulator_consumer_supply isink_consumer; + struct regulator_init_data isink_init; + struct regulator *dcdc; + struct regulator_consumer_supply dcdc_consumer; + struct regulator_init_data dcdc_init; +}; + struct wm8350_pmic { /* Number of regulators of each type on this device */ int max_dcdc; @@ -717,10 +748,15 @@ struct wm8350_pmic { /* regulator devices */ struct platform_device *pdev[NUM_WM8350_REGULATORS]; + + /* LED devices */ + struct wm8350_led led[2]; }; int wm8350_register_regulator(struct wm8350 *wm8350, int reg, struct regulator_init_data *initdata); +int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, + struct wm8350_led_platform_data *pdata); /* * Additional DCDC control not supported via regulator API diff --git a/include/linux/mm.h b/include/linux/mm.h index 4a3d28c8644..e8ddc98b840 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -56,19 +56,9 @@ extern unsigned long mmap_min_addr; extern struct kmem_cache *vm_area_cachep; -/* - * This struct defines the per-mm list of VMAs for uClinux. If CONFIG_MMU is - * disabled, then there's a single shared list of VMAs maintained by the - * system, and mm's subscribe to these individually - */ -struct vm_list_struct { - struct vm_list_struct *next; - struct vm_area_struct *vma; -}; - #ifndef CONFIG_MMU -extern struct rb_root nommu_vma_tree; -extern struct rw_semaphore nommu_vma_sem; +extern struct rb_root nommu_region_tree; +extern struct rw_semaphore nommu_region_sem; extern unsigned int kobjsize(const void *objp); #endif @@ -270,7 +260,6 @@ static inline int put_page_testzero(struct page *page) */ static inline int get_page_unless_zero(struct page *page) { - VM_BUG_ON(PageTail(page)); return atomic_inc_not_zero(&page->_count); } @@ -1061,6 +1050,7 @@ extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long, enum memmap_context); extern void setup_per_zone_pages_min(void); extern void mem_init(void); +extern void __init mmap_init(void); extern void show_mem(void); extern void si_meminfo(struct sysinfo * val); extern void si_meminfo_node(struct sysinfo *val, int nid); @@ -1072,6 +1062,9 @@ extern void setup_per_cpu_pageset(void); static inline void setup_per_cpu_pageset(void) {} #endif +/* nommu.c */ +extern atomic_t mmap_pages_allocated; + /* prio_tree.c */ void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old); void vma_prio_tree_insert(struct vm_area_struct *, struct prio_tree_root *); diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index c948350c378..7fbb9726755 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -28,6 +28,7 @@ add_page_to_lru_list(struct zone *zone, struct page *page, enum lru_list l) { list_add(&page->lru, &zone->lru[l].list); __inc_zone_state(zone, NR_LRU_BASE + l); + mem_cgroup_add_lru_list(page, l); } static inline void @@ -35,6 +36,7 @@ del_page_from_lru_list(struct zone *zone, struct page *page, enum lru_list l) { list_del(&page->lru); __dec_zone_state(zone, NR_LRU_BASE + l); + mem_cgroup_del_lru_list(page, l); } static inline void @@ -54,6 +56,7 @@ del_page_from_lru(struct zone *zone, struct page *page) l += page_is_file_cache(page); } __dec_zone_state(zone, NR_LRU_BASE + l); + mem_cgroup_del_lru_list(page, l); } /** @@ -78,23 +81,4 @@ static inline enum lru_list page_lru(struct page *page) return lru; } -/** - * inactive_anon_is_low - check if anonymous pages need to be deactivated - * @zone: zone to check - * - * Returns true if the zone does not have enough inactive anon pages, - * meaning some active anon pages need to be deactivated. - */ -static inline int inactive_anon_is_low(struct zone *zone) -{ - unsigned long active, inactive; - - active = zone_page_state(zone, NR_ACTIVE_ANON); - inactive = zone_page_state(zone, NR_INACTIVE_ANON); - - if (inactive * zone->inactive_ratio < active) - return 1; - - return 0; -} #endif diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 9cfc9b627fd..92915e81443 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -97,6 +97,23 @@ struct page { }; /* + * A region containing a mapping of a non-memory backed file under NOMMU + * conditions. These are held in a global tree and are pinned by the VMAs that + * map parts of them. + */ +struct vm_region { + struct rb_node vm_rb; /* link in global region tree */ + unsigned long vm_flags; /* VMA vm_flags */ + unsigned long vm_start; /* start address of region */ + unsigned long vm_end; /* region initialised to here */ + unsigned long vm_top; /* region allocated to here */ + unsigned long vm_pgoff; /* the offset in vm_file corresponding to vm_start */ + struct file *vm_file; /* the backing file or NULL */ + + atomic_t vm_usage; /* region usage count */ +}; + +/* * This struct defines a memory VMM memory area. There is one of these * per VM-area/task. A VM area is any part of the process virtual memory * space that has a special rule for the page-fault handlers (ie a shared @@ -152,7 +169,7 @@ struct vm_area_struct { unsigned long vm_truncate_count;/* truncate_count or restart_addr */ #ifndef CONFIG_MMU - atomic_t vm_usage; /* refcount (VMAs shared if !MMU) */ + struct vm_region *vm_region; /* NOMMU mapping region */ #endif #ifdef CONFIG_NUMA struct mempolicy *vm_policy; /* NUMA policy for the VMA */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 35a7b5e1946..09c14e213b6 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -263,6 +263,19 @@ enum zone_type { #error ZONES_SHIFT -- too many zones configured adjust calculation #endif +struct zone_reclaim_stat { + /* + * The pageout code in vmscan.c keeps track of how many of the + * mem/swap backed and file backed pages are refeferenced. + * The higher the rotated/scanned ratio, the more valuable + * that cache is. + * + * The anon LRU stats live in [0], file LRU stats in [1] + */ + unsigned long recent_rotated[2]; + unsigned long recent_scanned[2]; +}; + struct zone { /* Fields commonly accessed by the page allocator */ unsigned long pages_min, pages_low, pages_high; @@ -315,16 +328,7 @@ struct zone { unsigned long nr_scan; } lru[NR_LRU_LISTS]; - /* - * The pageout code in vmscan.c keeps track of how many of the - * mem/swap backed and file backed pages are refeferenced. - * The higher the rotated/scanned ratio, the more valuable - * that cache is. - * - * The anon LRU stats live in [0], file LRU stats in [1] - */ - unsigned long recent_rotated[2]; - unsigned long recent_scanned[2]; + struct zone_reclaim_stat reclaim_stat; unsigned long pages_scanned; /* since last reclaim */ unsigned long flags; /* zone flags, see below */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 00e2b575021..88d3d8fbf9f 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -520,6 +520,7 @@ struct cfi_fixup { #define CFI_MFR_AMD 0x0001 #define CFI_MFR_ATMEL 0x001F +#define CFI_MFR_SAMSUNG 0x00EC #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups); diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h index 0be442f881d..0555f7a0b9e 100644 --- a/include/linux/mtd/ftl.h +++ b/include/linux/mtd/ftl.h @@ -32,25 +32,25 @@ #define _LINUX_FTL_H typedef struct erase_unit_header_t { - u_int8_t LinkTargetTuple[5]; - u_int8_t DataOrgTuple[10]; - u_int8_t NumTransferUnits; - u_int32_t EraseCount; - u_int16_t LogicalEUN; - u_int8_t BlockSize; - u_int8_t EraseUnitSize; - u_int16_t FirstPhysicalEUN; - u_int16_t NumEraseUnits; - u_int32_t FormattedSize; - u_int32_t FirstVMAddress; - u_int16_t NumVMPages; - u_int8_t Flags; - u_int8_t Code; - u_int32_t SerialNumber; - u_int32_t AltEUHOffset; - u_int32_t BAMOffset; - u_int8_t Reserved[12]; - u_int8_t EndTuple[2]; + uint8_t LinkTargetTuple[5]; + uint8_t DataOrgTuple[10]; + uint8_t NumTransferUnits; + uint32_t EraseCount; + uint16_t LogicalEUN; + uint8_t BlockSize; + uint8_t EraseUnitSize; + uint16_t FirstPhysicalEUN; + uint16_t NumEraseUnits; + uint32_t FormattedSize; + uint32_t FirstVMAddress; + uint16_t NumVMPages; + uint8_t Flags; + uint8_t Code; + uint32_t SerialNumber; + uint32_t AltEUHOffset; + uint32_t BAMOffset; + uint8_t Reserved[12]; + uint8_t EndTuple[2]; } erase_unit_header_t; /* Flags in erase_unit_header_t */ diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index aa30244492c..b981b877221 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -223,6 +223,7 @@ struct map_info { must leave it enabled. */ void (*set_vpp)(struct map_info *, int); + unsigned long pfow_base; unsigned long map_priv_1; unsigned long map_priv_2; void *fldrv_priv; diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index eae26bb6430..3aa5d77c2cd 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -15,6 +15,8 @@ #include <linux/mtd/compatmac.h> #include <mtd/mtd-abi.h> +#include <asm/div64.h> + #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 #define MAX_MTD_DEVICES 32 @@ -25,20 +27,20 @@ #define MTD_ERASE_DONE 0x08 #define MTD_ERASE_FAILED 0x10 -#define MTD_FAIL_ADDR_UNKNOWN 0xffffffff +#define MTD_FAIL_ADDR_UNKNOWN -1LL /* If the erase fails, fail_addr might indicate exactly which block failed. If fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not specific to any particular block. */ struct erase_info { struct mtd_info *mtd; - u_int32_t addr; - u_int32_t len; - u_int32_t fail_addr; + uint64_t addr; + uint64_t len; + uint64_t fail_addr; u_long time; u_long retries; - u_int dev; - u_int cell; + unsigned dev; + unsigned cell; void (*callback) (struct erase_info *self); u_long priv; u_char state; @@ -46,9 +48,9 @@ struct erase_info { }; struct mtd_erase_region_info { - u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ - u_int32_t erasesize; /* For this region */ - u_int32_t numblocks; /* Number of blocks of erasesize in this region */ + uint64_t offset; /* At which this region starts, from the beginning of the MTD */ + uint32_t erasesize; /* For this region */ + uint32_t numblocks; /* Number of blocks of erasesize in this region */ unsigned long *lockmap; /* If keeping bitmap of locks */ }; @@ -83,7 +85,7 @@ typedef enum { * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * - * Note, it is allowed to read more then one OOB area at one go, but not write. + * Note, it is allowed to read more than one OOB area at one go, but not write. * The interface assumes that the OOB write requests program only one page's * OOB area. */ @@ -100,14 +102,14 @@ struct mtd_oob_ops { struct mtd_info { u_char type; - u_int32_t flags; - u_int32_t size; // Total size of the MTD + uint32_t flags; + uint64_t size; // Total size of the MTD /* "Major" erase size for the device. Naïve users may take this * to be the only erase size available, or may use the more detailed * information below if they desire */ - u_int32_t erasesize; + uint32_t erasesize; /* Minimal writable flash unit size. In case of NOR flash it is 1 (even * though individual bits can be cleared), in case of NAND flash it is * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR @@ -115,10 +117,20 @@ struct mtd_info { * Any driver registering a struct mtd_info must ensure a writesize of * 1 or larger. */ - u_int32_t writesize; + uint32_t writesize; + + uint32_t oobsize; // Amount of OOB data per block (e.g. 16) + uint32_t oobavail; // Available OOB bytes per block - u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) - u_int32_t oobavail; // Available OOB bytes per block + /* + * If erasesize is a power of 2 then the shift is stored in + * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize. + */ + unsigned int erasesize_shift; + unsigned int writesize_shift; + /* Masks based on erasesize_shift and writesize_shift */ + unsigned int erasesize_mask; + unsigned int writesize_mask; // Kernel-only stuff starts here. const char *name; @@ -190,8 +202,8 @@ struct mtd_info { void (*sync) (struct mtd_info *mtd); /* Chip-supported device locking */ - int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); + int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); /* Power Management functions */ int (*suspend) (struct mtd_info *mtd); @@ -221,6 +233,35 @@ struct mtd_info { void (*put_device) (struct mtd_info *mtd); }; +static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->erasesize_shift) + return sz >> mtd->erasesize_shift; + do_div(sz, mtd->erasesize); + return sz; +} + +static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->erasesize_shift) + return sz & mtd->erasesize_mask; + return do_div(sz, mtd->erasesize); +} + +static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->writesize_shift) + return sz >> mtd->writesize_shift; + do_div(sz, mtd->writesize); + return sz; +} + +static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->writesize_shift) + return sz & mtd->writesize_mask; + return do_div(sz, mtd->writesize); +} /* Kernel-side ioctl definitions */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 733d3f3b4eb..db5b63da2a7 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -335,17 +335,12 @@ struct nand_buffers { * @erase_cmd: [INTERN] erase command write function, selectable due to AND support * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) - * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress * @state: [INTERN] the current state of the NAND device * @oob_poi: poison value buffer * @page_shift: [INTERN] number of address bits in a page (column address bits) * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry * @chip_shift: [INTERN] number of address bits in one chip - * @datbuf: [INTERN] internal buffer for one page + oob - * @oobbuf: [INTERN] oob buffer for one eraseblock - * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized - * @data_poi: [INTERN] pointer to a data buffer * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about * special functionality. See the defines for further explanation * @badblockpos: [INTERN] position of the bad block marker in the oob area @@ -399,7 +394,7 @@ struct nand_chip { int bbt_erase_shift; int chip_shift; int numchips; - unsigned long chipsize; + uint64_t chipsize; int pagemask; int pagebuf; int subpagesize; diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index c92b4d43960..a45dd831b3f 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -36,9 +36,9 @@ struct mtd_partition { char *name; /* identifier string */ - u_int32_t size; /* partition size */ - u_int32_t offset; /* offset within the master MTD space */ - u_int32_t mask_flags; /* master MTD flags to mask out for this partition */ + uint64_t size; /* partition size */ + uint64_t offset; /* offset within the master MTD space */ + uint32_t mask_flags; /* master MTD flags to mask out for this partition */ struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/ struct mtd_info **mtdp; /* pointer to store the MTD object */ }; diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h new file mode 100644 index 00000000000..b730d4f8465 --- /dev/null +++ b/include/linux/mtd/pfow.h @@ -0,0 +1,159 @@ +/* Primary function overlay window definitions + * and service functions used by LPDDR chips + */ +#ifndef __LINUX_MTD_PFOW_H +#define __LINUX_MTD_PFOW_H + +#include <linux/mtd/qinfo.h> + +/* PFOW registers addressing */ +/* Address of symbol "P" */ +#define PFOW_QUERY_STRING_P 0x0000 +/* Address of symbol "F" */ +#define PFOW_QUERY_STRING_F 0x0002 +/* Address of symbol "O" */ +#define PFOW_QUERY_STRING_O 0x0004 +/* Address of symbol "W" */ +#define PFOW_QUERY_STRING_W 0x0006 +/* Identification info for LPDDR chip */ +#define PFOW_MANUFACTURER_ID 0x0020 +#define PFOW_DEVICE_ID 0x0022 +/* Address in PFOW where prog buffer can can be found */ +#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040 +/* Size of program buffer in words */ +#define PFOW_PROGRAM_BUFFER_SIZE 0x0042 +/* Address command code register */ +#define PFOW_COMMAND_CODE 0x0080 +/* command data register */ +#define PFOW_COMMAND_DATA 0x0084 +/* command address register lower address bits */ +#define PFOW_COMMAND_ADDRESS_L 0x0088 +/* command address register upper address bits */ +#define PFOW_COMMAND_ADDRESS_H 0x008a +/* number of bytes to be proggrammed lower address bits */ +#define PFOW_DATA_COUNT_L 0x0090 +/* number of bytes to be proggrammed higher address bits */ +#define PFOW_DATA_COUNT_H 0x0092 +/* command execution register, the only possible value is 0x01 */ +#define PFOW_COMMAND_EXECUTE 0x00c0 +/* 0x01 should be written at this address to clear buffer */ +#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4 +/* device program/erase suspend register */ +#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8 +/* device status register */ +#define PFOW_DSR 0x00cc + +/* LPDDR memory device command codes */ +/* They are possible values of PFOW command code register */ +#define LPDDR_WORD_PROGRAM 0x0041 +#define LPDDR_BUFF_PROGRAM 0x00E9 +#define LPDDR_BLOCK_ERASE 0x0020 +#define LPDDR_LOCK_BLOCK 0x0061 +#define LPDDR_UNLOCK_BLOCK 0x0062 +#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065 +#define LPDDR_INFO_QUERY 0x0098 +#define LPDDR_READ_OTP 0x0097 +#define LPDDR_PROG_OTP 0x00C0 +#define LPDDR_RESUME 0x00D0 + +/* Defines possible value of PFOW command execution register */ +#define LPDDR_START_EXECUTION 0x0001 + +/* Defines possible value of PFOW program/erase suspend register */ +#define LPDDR_SUSPEND 0x0001 + +/* Possible values of PFOW device status register */ +/* access R - read; RC read & clearable */ +#define DSR_DPS (1<<1) /* RC; device protect status + * 0 - not protected 1 - locked */ +#define DSR_PSS (1<<2) /* R; program suspend status; + * 0-prog in progress/completed, + * 1- prog suspended */ +#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */ +#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */ +#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status; + * 0-success erase/blank check, + * 1 blank check error */ +#define DSR_ESS (1<<6) /* R; erase suspend status; + * 0-erase in progress/complete, + * 1 erase suspended */ +#define DSR_READY_STATUS (1<<7) /* R; Device status + * 0-busy, + * 1-ready */ +#define DSR_RPS (0x3<<8) /* RC; region program status + * 00 - Success, + * 01-re-program attempt in region with + * object mode data, + * 10-object mode program w attempt in + * region with control mode data + * 11-attempt to program invalid half + * with 0x41 command */ +#define DSR_AOS (1<<12) /* RC; 1- AO related failure */ +#define DSR_AVAILABLE (1<<15) /* R; Device availbility + * 1 - Device available + * 0 - not available */ + +/* The superset of all possible error bits in DSR */ +#define DSR_ERR 0x133A + +static inline void send_pfow_command(struct map_info *map, + unsigned long cmd_code, unsigned long adr, + unsigned long len, map_word *datum) +{ + int bits_per_chip = map_bankwidth(map) * 8; + int chipnum; + struct lpddr_private *lpddr = map->fldrv_priv; + chipnum = adr >> lpddr->chipshift; + + map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE); + map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)), + map->pfow_base + PFOW_COMMAND_ADDRESS_L); + map_write(map, CMD(adr>>bits_per_chip), + map->pfow_base + PFOW_COMMAND_ADDRESS_H); + if (len) { + map_write(map, CMD(len & ((1<<bits_per_chip) - 1)), + map->pfow_base + PFOW_DATA_COUNT_L); + map_write(map, CMD(len>>bits_per_chip), + map->pfow_base + PFOW_DATA_COUNT_H); + } + if (datum) + map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA); + + /* Command execution start */ + map_write(map, CMD(LPDDR_START_EXECUTION), + map->pfow_base + PFOW_COMMAND_EXECUTE); +} + +static inline void print_drs_error(unsigned dsr) +{ + int prog_status = (dsr & DSR_RPS) >> 8; + + if (!(dsr & DSR_AVAILABLE)) + printk(KERN_NOTICE"DSR.15: (0) Device not Available\n"); + if (prog_status & 0x03) + printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid " + "half with 41h command\n"); + else if (prog_status & 0x02) + printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt " + "in region with Control Mode data\n"); + else if (prog_status & 0x01) + printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region " + "with Object Mode data\n"); + if (!(dsr & DSR_READY_STATUS)) + printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n"); + if (dsr & DSR_ESS) + printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n"); + if (dsr & DSR_ERASE_STATUS) + printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n"); + if (dsr & DSR_PROGRAM_STATUS) + printk(KERN_NOTICE"DSR.4: (1) Program Error\n"); + if (dsr & DSR_VPPS) + printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation " + "aborted\n"); + if (dsr & DSR_PSS) + printk(KERN_NOTICE"DSR.2: (1) Program suspended\n"); + if (dsr & DSR_DPS) + printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt " + "on locked block\n"); +} +#endif /* __LINUX_MTD_PFOW_H */ diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h index c8e63a5ee72..76f7cabf07d 100644 --- a/include/linux/mtd/physmap.h +++ b/include/linux/mtd/physmap.h @@ -24,6 +24,7 @@ struct physmap_flash_data { unsigned int width; void (*set_vpp)(struct map_info *, int); unsigned int nr_parts; + unsigned int pfow_base; struct mtd_partition *parts; }; diff --git a/include/linux/mtd/qinfo.h b/include/linux/mtd/qinfo.h new file mode 100644 index 00000000000..7b3d487d8b3 --- /dev/null +++ b/include/linux/mtd/qinfo.h @@ -0,0 +1,91 @@ +#ifndef __LINUX_MTD_QINFO_H +#define __LINUX_MTD_QINFO_H + +#include <linux/mtd/map.h> +#include <linux/wait.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/flashchip.h> +#include <linux/mtd/partitions.h> + +/* lpddr_private describes lpddr flash chip in memory map + * @ManufactId - Chip Manufacture ID + * @DevId - Chip Device ID + * @qinfo - pointer to qinfo records describing the chip + * @numchips - number of chips including virual RWW partitions + * @chipshift - Chip/partiton size 2^chipshift + * @chips - per-chip data structure + */ +struct lpddr_private { + uint16_t ManufactId; + uint16_t DevId; + struct qinfo_chip *qinfo; + int numchips; + unsigned long chipshift; + struct flchip chips[0]; +}; + +/* qinfo_query_info structure contains request information for + * each qinfo record + * @major - major number of qinfo record + * @major - minor number of qinfo record + * @id_str - descriptive string to access the record + * @desc - detailed description for the qinfo record + */ +struct qinfo_query_info { + uint8_t major; + uint8_t minor; + char *id_str; + char *desc; +}; + +/* + * qinfo_chip structure contains necessary qinfo records data + * @DevSizeShift - Device size 2^n bytes + * @BufSizeShift - Program buffer size 2^n bytes + * @TotalBlocksNum - Total number of blocks + * @UniformBlockSizeShift - Uniform block size 2^UniformBlockSizeShift bytes + * @HWPartsNum - Number of hardware partitions + * @SuspEraseSupp - Suspend erase supported + * @SingleWordProgTime - Single word program 2^SingleWordProgTime u-sec + * @ProgBufferTime - Program buffer write 2^ProgBufferTime u-sec + * @BlockEraseTime - Block erase 2^BlockEraseTime m-sec + */ +struct qinfo_chip { + /* General device info */ + uint16_t DevSizeShift; + uint16_t BufSizeShift; + /* Erase block information */ + uint16_t TotalBlocksNum; + uint16_t UniformBlockSizeShift; + /* Partition information */ + uint16_t HWPartsNum; + /* Optional features */ + uint16_t SuspEraseSupp; + /* Operation typical time */ + uint16_t SingleWordProgTime; + uint16_t ProgBufferTime; + uint16_t BlockEraseTime; +}; + +/* defines for fixup usage */ +#define LPDDR_MFR_ANY 0xffff +#define LPDDR_ID_ANY 0xffff +#define NUMONYX_MFGR_ID 0x0089 +#define R18_DEVICE_ID_1G 0x893c + +static inline map_word lpddr_build_cmd(u_long cmd, struct map_info *map) +{ + map_word val = { {0} }; + val.x[0] = cmd; + return val; +} + +#define CMD(x) lpddr_build_cmd(x, map) +#define CMDVAL(cmd) cmd.x[0] + +struct mtd_info *lpddr_cmdset(struct map_info *); + +#endif + diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h new file mode 100644 index 00000000000..25f4d2a845c --- /dev/null +++ b/include/linux/mtd/sharpsl.h @@ -0,0 +1,20 @@ +/* + * SharpSL NAND support + * + * Copyright (C) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +struct sharpsl_nand_platform_data { + struct nand_bbt_descr *badblock_pattern; + struct nand_ecclayout *ecc_layout; + struct mtd_partition *partitions; + unsigned int nr_partitions; +}; diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h index 9f2d76347f1..f69e66d151c 100644 --- a/include/linux/ncp_fs.h +++ b/include/linux/ncp_fs.h @@ -87,7 +87,7 @@ struct ncp_objectname_ioctl #define NCP_AUTH_NDS 0x32 int auth_type; size_t object_name_len; - void __user * object_name; /* an userspace data, in most cases user name */ + void __user * object_name; /* a userspace data, in most cases user name */ }; struct ncp_privatedata_ioctl diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c28bbba3c23..ec54785d34f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -467,7 +467,7 @@ struct netdev_queue { * This function is called when network device transistions to the down * state. * - * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev); + * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev); * Called when a packet needs to be transmitted. * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED, * Required can not be NULL. @@ -795,6 +795,7 @@ struct net_device NETREG_UNREGISTERING, /* called unregister_netdevice */ NETREG_UNREGISTERED, /* completed unregister todo */ NETREG_RELEASED, /* called free_netdev */ + NETREG_DUMMY, /* dummy device for NAPI poll */ } reg_state; /* Called from unregister, can be used to call free_netdev */ @@ -1077,6 +1078,8 @@ extern void free_netdev(struct net_device *dev); extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); extern int unregister_netdevice_notifier(struct notifier_block *nb); +extern int init_dummy_netdev(struct net_device *dev); + extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); extern struct net_device *__dev_get_by_index(struct net *net, int ifindex); @@ -1125,9 +1128,6 @@ struct softnet_data struct sk_buff *completion_queue; struct napi_struct backlog; -#ifdef CONFIG_NET_DMA - struct dma_chan *net_dma; -#endif }; DECLARE_PER_CPU(struct softnet_data,softnet_data); @@ -1373,8 +1373,14 @@ extern int netif_rx_ni(struct sk_buff *skb); #define HAVE_NETIF_RECEIVE_SKB 1 extern int netif_receive_skb(struct sk_buff *skb); extern void napi_gro_flush(struct napi_struct *napi); +extern int dev_gro_receive(struct napi_struct *napi, + struct sk_buff *skb); extern int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb); +extern void napi_reuse_skb(struct napi_struct *napi, + struct sk_buff *skb); +extern struct sk_buff * napi_fraginfo_skb(struct napi_struct *napi, + struct napi_gro_fraginfo *info); extern int napi_gro_frags(struct napi_struct *napi, struct napi_gro_fraginfo *info); extern void netif_nit_deliver(struct sk_buff *skb); diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index e52ce475d19..c7ee8744d26 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -270,6 +270,7 @@ struct xt_match struct list_head list; const char name[XT_FUNCTION_MAXNAMELEN-1]; + u_int8_t revision; /* Return true or false: return FALSE and set *hotdrop = 1 to force immediate packet drop. */ @@ -302,7 +303,6 @@ struct xt_match unsigned short proto; unsigned short family; - u_int8_t revision; }; /* Registration hooks for targets. */ diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index ea036676948..b912311a56b 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -88,6 +88,8 @@ #define NFS4_ACE_GENERIC_EXECUTE 0x001200A0 #define NFS4_ACE_MASK_ALL 0x001F01FF +#define NFS4_MAX_UINT64 (~(u64)0) + enum nfs4_acl_whotype { NFS4_ACL_WHO_NAMED = 0, NFS4_ACL_WHO_OWNER, diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 21269405ffe..e19f45991b2 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -23,7 +23,6 @@ /* * nfsd version */ -#define NFSD_VERSION "0.5" #define NFSD_SUPPORTED_MINOR_VERSION 0 /* diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index d1941cb965e..b2e093870bc 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -68,6 +68,10 @@ struct nfs_fhbase_old { * 1 - 4 byte user specified identifier * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED * 3 - 4 byte device id, encoded for user-space, 4 byte inode number + * 4 - 4 byte inode number and 4 byte uuid + * 5 - 8 byte uuid + * 6 - 16 byte uuid + * 7 - 8 byte inode number and 16 byte uuid * * The fileid_type identified how the file within the filesystem is encoded. * This is (will be) passed to, and set by, the underlying filesystem if it supports diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h new file mode 100644 index 00000000000..9acb21572ea --- /dev/null +++ b/include/linux/nwpserial.h @@ -0,0 +1,18 @@ +/* + * Serial Port driver for a NWP uart device + * + * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef _NWPSERIAL_H +#define _NWPSERIAL_H + +int nwpserial_register_port(struct uart_port *port); +void nwpserial_unregister_port(int line); + +#endif /* _NWPSERIAL_H */ diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index bd2a870ec29..34974b5a76f 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -17,4 +17,7 @@ void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node); +/* must call put_device() when done with returned i2c_client device */ +struct i2c_client *of_find_i2c_device_by_node(struct device_node *node); + #endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 1ce9fe572e5..1d9518bc4c5 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -164,4 +164,22 @@ void oprofile_put_buff(unsigned long *buf, unsigned int start, unsigned long oprofile_get_cpu_buffer_size(void); void oprofile_cpu_buffer_inc_smpl_lost(void); +/* cpu buffer functions */ + +struct op_sample; + +struct op_entry { + struct ring_buffer_event *event; + struct op_sample *sample; + unsigned long irq_flags; + unsigned long size; + unsigned long *data; +}; + +void oprofile_write_reserve(struct op_entry *entry, + struct pt_regs * const regs, + unsigned long pc, int code, int size); +int oprofile_add_data(struct op_entry *entry, unsigned long val); +int oprofile_write_commit(struct op_entry *entry); + #endif /* OPROFILE_H */ diff --git a/include/linux/oxu210hp.h b/include/linux/oxu210hp.h new file mode 100644 index 00000000000..0bf96eae538 --- /dev/null +++ b/include/linux/oxu210hp.h @@ -0,0 +1,7 @@ +/* platform data for the OXU210HP HCD */ + +struct oxu210hp_platform_data { + unsigned int bus16:1; + unsigned int use_hcd_otg:1; + unsigned int use_hcd_sph:1; +}; diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index 1e6d34bfa09..602cc1fdee9 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -26,10 +26,6 @@ enum { PCG_LOCK, /* page cgroup is locked */ PCG_CACHE, /* charged as cache */ PCG_USED, /* this object is in use. */ - /* flags for LRU placement */ - PCG_ACTIVE, /* page is active in this cgroup */ - PCG_FILE, /* page is file system backed */ - PCG_UNEVICTABLE, /* page is unevictableable */ }; #define TESTPCGFLAG(uname, lname) \ @@ -50,19 +46,6 @@ TESTPCGFLAG(Cache, CACHE) TESTPCGFLAG(Used, USED) CLEARPCGFLAG(Used, USED) -/* LRU management flags (from global-lru definition) */ -TESTPCGFLAG(File, FILE) -SETPCGFLAG(File, FILE) -CLEARPCGFLAG(File, FILE) - -TESTPCGFLAG(Active, ACTIVE) -SETPCGFLAG(Active, ACTIVE) -CLEARPCGFLAG(Active, ACTIVE) - -TESTPCGFLAG(Unevictable, UNEVICTABLE) -SETPCGFLAG(Unevictable, UNEVICTABLE) -CLEARPCGFLAG(Unevictable, UNEVICTABLE) - static inline int page_cgroup_nid(struct page_cgroup *pc) { return page_to_nid(pc->page); @@ -105,4 +88,39 @@ static inline void page_cgroup_init(void) } #endif + +#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +#include <linux/swap.h> +extern struct mem_cgroup * +swap_cgroup_record(swp_entry_t ent, struct mem_cgroup *mem); +extern struct mem_cgroup *lookup_swap_cgroup(swp_entry_t ent); +extern int swap_cgroup_swapon(int type, unsigned long max_pages); +extern void swap_cgroup_swapoff(int type); +#else +#include <linux/swap.h> + +static inline +struct mem_cgroup *swap_cgroup_record(swp_entry_t ent, struct mem_cgroup *mem) +{ + return NULL; +} + +static inline +struct mem_cgroup *lookup_swap_cgroup(swp_entry_t ent) +{ + return NULL; +} + +static inline int +swap_cgroup_swapon(int type, unsigned long max_pages) +{ + return 0; +} + +static inline void swap_cgroup_swapoff(int type) +{ + return; +} + +#endif #endif diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 8837928fbf3..042c166f65d 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -8,6 +8,8 @@ #ifndef _PCI_ACPI_H_ #define _PCI_ACPI_H_ +#include <linux/acpi.h> + #define OSC_QUERY_TYPE 0 #define OSC_SUPPORT_TYPE 1 #define OSC_CONTROL_TYPE 2 @@ -48,15 +50,7 @@ #ifdef CONFIG_ACPI extern acpi_status pci_osc_control_set(acpi_handle handle, u32 flags); -extern acpi_status __pci_osc_support_set(u32 flags, const char *hid); -static inline acpi_status pci_osc_support_set(u32 flags) -{ - return __pci_osc_support_set(flags, PCI_ROOT_HID_STRING); -} -static inline acpi_status pcie_osc_support_set(u32 flags) -{ - return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING); -} +int pci_acpi_osc_support(acpi_handle handle, u32 flags); static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { /* Find root host bridge */ @@ -66,6 +60,15 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus), pdev->bus->number); } + +static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) +{ + int seg = pci_domain_nr(pbus), busnr = pbus->number; + struct pci_dev *bridge = pbus->self; + if (bridge) + return DEVICE_ACPI_HANDLE(&(bridge->dev)); + return acpi_get_pci_rootbridge_handle(seg, busnr); +} #else #if !defined(AE_ERROR) typedef u32 acpi_status; @@ -73,8 +76,6 @@ typedef u32 acpi_status; #endif static inline acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) {return AE_ERROR;} -static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} -static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;} static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { return NULL; } #endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 4bb156ba854..80f8b8b65fd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -82,7 +82,30 @@ enum pci_mmap_state { #define PCI_DMA_FROMDEVICE 2 #define PCI_DMA_NONE 3 -#define DEVICE_COUNT_RESOURCE 12 +/* + * For PCI devices, the region numbers are assigned this way: + */ +enum { + /* #0-5: standard PCI resources */ + PCI_STD_RESOURCES, + PCI_STD_RESOURCE_END = 5, + + /* #6: expansion ROM resource */ + PCI_ROM_RESOURCE, + + /* resources assigned to buses behind the bridge */ +#define PCI_BRIDGE_RESOURCE_NUM 4 + + PCI_BRIDGE_RESOURCES, + PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES + + PCI_BRIDGE_RESOURCE_NUM - 1, + + /* total resources associated with a PCI device */ + PCI_NUM_RESOURCES, + + /* preserve this for compatibility */ + DEVICE_COUNT_RESOURCE +}; typedef int __bitwise pci_power_t; @@ -274,18 +297,6 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev, hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); } -/* - * For PCI devices, the region numbers are assigned this way: - * - * 0-5 standard PCI regions - * 6 expansion ROM - * 7-10 bridges: address space assigned to buses behind the bridge - */ - -#define PCI_ROM_RESOURCE 6 -#define PCI_BRIDGE_RESOURCES 7 -#define PCI_NUM_RESOURCES 11 - #ifndef PCI_BUS_NUM_RESOURCES #define PCI_BUS_NUM_RESOURCES 16 #endif @@ -325,6 +336,15 @@ struct pci_bus { #define pci_bus_b(n) list_entry(n, struct pci_bus, node) #define to_pci_bus(n) container_of(n, struct pci_bus, dev) +#ifdef CONFIG_PCI_MSI +static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) +{ + return pci_dev->msi_enabled || pci_dev->msix_enabled; +} +#else +static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; } +#endif + /* * Error values that may be returned by PCI functions. */ @@ -532,7 +552,9 @@ int __must_check pci_bus_add_device(struct pci_dev *dev); void pci_read_bridge_bases(struct pci_bus *child); struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); +u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin); int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); +u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); @@ -629,6 +651,7 @@ static inline int pci_is_managed(struct pci_dev *pdev) void pci_disable_device(struct pci_dev *dev); void pci_set_master(struct pci_dev *dev); +void pci_clear_master(struct pci_dev *dev); int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state); #define HAVE_PCI_SET_MWI int __must_check pci_set_mwi(struct pci_dev *dev); @@ -647,7 +670,7 @@ int pcie_get_readrq(struct pci_dev *dev); int pcie_set_readrq(struct pci_dev *dev, int rq); int pci_reset_function(struct pci_dev *dev); int pci_execute_reset_function(struct pci_dev *dev); -void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno); +void pci_update_resource(struct pci_dev *dev, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); int pci_select_bars(struct pci_dev *dev, unsigned long flags); @@ -674,6 +697,11 @@ int pci_back_from_sleep(struct pci_dev *dev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); +/* Vital product data routines */ +ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf); +ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf); +int pci_vpd_truncate(struct pci_dev *dev, size_t size); + /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ void pci_bus_assign_resources(struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); @@ -686,10 +714,13 @@ void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), int (*)(struct pci_dev *, u8, u8)); #define HAVE_PCI_REQ_REGIONS 2 int __must_check pci_request_regions(struct pci_dev *, const char *); +int __must_check pci_request_regions_exclusive(struct pci_dev *, const char *); void pci_release_regions(struct pci_dev *); int __must_check pci_request_region(struct pci_dev *, int, const char *); +int __must_check pci_request_region_exclusive(struct pci_dev *, int, const char *); void pci_release_region(struct pci_dev *, int); int pci_request_selected_regions(struct pci_dev *, int, const char *); +int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ @@ -779,6 +810,10 @@ static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) static inline void pci_restore_msi_state(struct pci_dev *dev) { } +static inline int pci_msi_enabled(void) +{ + return 0; +} #else extern int pci_enable_msi(struct pci_dev *dev); extern void pci_msi_shutdown(struct pci_dev *dev); @@ -789,6 +824,16 @@ extern void pci_msix_shutdown(struct pci_dev *dev); extern void pci_disable_msix(struct pci_dev *dev); extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); extern void pci_restore_msi_state(struct pci_dev *dev); +extern int pci_msi_enabled(void); +#endif + +#ifndef CONFIG_PCIEASPM +static inline int pcie_aspm_enabled(void) +{ + return 0; +} +#else +extern int pcie_aspm_enabled(void); #endif #ifdef CONFIG_HT_IRQ @@ -1140,20 +1185,9 @@ static inline void pci_mmcfg_early_init(void) { } static inline void pci_mmcfg_late_init(void) { } #endif -#ifdef CONFIG_HAS_IOMEM -static inline void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar) -{ - /* - * Make sure the BAR is actually a memory resource, not an IO resource - */ - if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { - WARN_ON(1); - return NULL; - } - return ioremap_nocache(pci_resource_start(pdev, bar), - pci_resource_len(pdev, bar)); -} -#endif +int pci_ext_cfg_avail(struct pci_dev *dev); + +void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index a00bd1a0f15..20998746518 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -223,11 +223,12 @@ struct hotplug_params { #ifdef CONFIG_ACPI #include <acpi/acpi.h> #include <acpi/acpi_bus.h> -#include <acpi/actypes.h> extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_root_bridge(acpi_handle handle); +int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); +int acpi_pci_detect_ejectable(struct pci_bus *pbus); #endif #endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d543365518a..d56ad9c21c0 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2174,6 +2174,7 @@ #define PCI_DEVICE_ID_RDC_R6040 0x6040 #define PCI_DEVICE_ID_RDC_R6060 0x6060 #define PCI_DEVICE_ID_RDC_R6061 0x6061 +#define PCI_DEVICE_ID_RDC_D1010 0x1010 #define PCI_VENDOR_ID_LENOVO 0x17aa diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e5effd47ed7..027815b4635 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -210,6 +210,7 @@ #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 @@ -316,6 +317,17 @@ #define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ #define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ +/* PCI Advanced Feature registers */ + +#define PCI_AF_LENGTH 2 +#define PCI_AF_CAP 3 +#define PCI_AF_CAP_TP 0x01 +#define PCI_AF_CAP_FLR 0x02 +#define PCI_AF_CTRL 4 +#define PCI_AF_CTRL_FLR 0x01 +#define PCI_AF_STATUS 5 +#define PCI_AF_STATUS_TP 0x01 + /* PCI-X registers */ #define PCI_X_CMD 2 /* Modes & Features */ @@ -399,20 +411,70 @@ #define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ -#define PCI_EXP_LNKCAP_ASPMS 0xc00 /* ASPM Support */ -#define PCI_EXP_LNKCAP_L0SEL 0x7000 /* L0s Exit Latency */ -#define PCI_EXP_LNKCAP_L1EL 0x38000 /* L1 Exit Latency */ -#define PCI_EXP_LNKCAP_CLKPM 0x40000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ +#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Suprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ +#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ +#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ -#define PCI_EXP_LNKCTL_RL 0x20 /* Retrain Link */ -#define PCI_EXP_LNKCTL_CCC 0x40 /* Common Clock COnfiguration */ +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ +#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ +#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ +#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ +#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ #define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ +#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ #define PCI_EXP_LNKSTA 18 /* Link Status */ -#define PCI_EXP_LNKSTA_LT 0x800 /* Link Training */ +#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ +#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ #define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ +#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ +#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ +#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ +#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ +#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ +#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */ +#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */ +#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */ +#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */ +#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */ +#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */ +#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ +#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ +#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ #define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ +#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ +#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ +#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */ +#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ +#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ +#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ +#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ +#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ +#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ #define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ +#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ +#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ +#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */ +#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */ +#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */ +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ +#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ +#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ #define PCI_EXP_RTCTL 28 /* Root Control */ #define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ #define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ diff --git a/include/linux/phantom.h b/include/linux/phantom.h index 02268c54c25..94dd6645c60 100644 --- a/include/linux/phantom.h +++ b/include/linux/phantom.h @@ -10,7 +10,7 @@ #ifndef __PHANTOM_H #define __PHANTOM_H -#include <asm/types.h> +#include <linux/types.h> /* PHN_(G/S)ET_REG param */ struct phm_reg { diff --git a/include/linux/pid.h b/include/linux/pid.h index bb206c56d1f..49f1c2f66e9 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -123,6 +123,24 @@ extern struct pid *alloc_pid(struct pid_namespace *ns); extern void free_pid(struct pid *pid); /* + * ns_of_pid() returns the pid namespace in which the specified pid was + * allocated. + * + * NOTE: + * ns_of_pid() is expected to be called for a process (task) that has + * an attached 'struct pid' (see attach_pid(), detach_pid()) i.e @pid + * is expected to be non-NULL. If @pid is NULL, caller should handle + * the resulting NULL pid-ns. + */ +static inline struct pid_namespace *ns_of_pid(struct pid *pid) +{ + struct pid_namespace *ns = NULL; + if (pid) + ns = pid->numbers[pid->level].ns; + return ns; +} + +/* * the helpers to get the pid's id seen from different namespaces * * pid_nr() : global id, i.e. the id seen from the init namespace; diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index d82fe825d62..38d10326246 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -79,11 +79,7 @@ static inline void zap_pid_ns_processes(struct pid_namespace *ns) } #endif /* CONFIG_PID_NS */ -static inline struct pid_namespace *task_active_pid_ns(struct task_struct *tsk) -{ - return tsk->nsproxy->pid_ns; -} - +extern struct pid_namespace *task_active_pid_ns(struct task_struct *tsk); void pidhash_init(void); void pidmap_init(void); diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h index 34a196ee794..787d19ea9f4 100644 --- a/include/linux/qnx4_fs.h +++ b/include/linux/qnx4_fs.h @@ -2,14 +2,12 @@ * Name : qnx4_fs.h * Author : Richard Frowijn * Function : qnx4 global filesystem definitions - * Version : 1.0.2 - * Last modified : 2000-01-31 - * * History : 23-03-1998 created */ #ifndef _LINUX_QNX4_FS_H #define _LINUX_QNX4_FS_H +#include <linux/types.h> #include <linux/qnxtypes.h> #include <linux/magic.h> diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h index a3eb1137857..bebbe5cc4fb 100644 --- a/include/linux/qnxtypes.h +++ b/include/linux/qnxtypes.h @@ -2,9 +2,6 @@ * Name : qnxtypes.h * Author : Richard Frowijn * Function : standard qnx types - * Version : 1.0.2 - * Last modified : 2000-01-06 - * * History : 22-03-1998 created * */ @@ -12,6 +9,8 @@ #ifndef _QNX4TYPES_H #define _QNX4TYPES_H +#include <linux/types.h> + typedef __le16 qnx4_nxtnt_t; typedef __u8 qnx4_ftype_t; diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h index 5bd8975ed78..8c4bbdecc44 100644 --- a/include/linux/radeonfb.h +++ b/include/linux/radeonfb.h @@ -2,7 +2,7 @@ #define __LINUX_RADEONFB_H__ #include <asm/ioctl.h> -#include <asm/types.h> +#include <linux/types.h> #define ATY_RADEON_LCD_ON 0x00000001 #define ATY_RADEON_CRT_ON 0x00000002 diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 8fc909ef678..9743e4dbc91 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -137,6 +137,9 @@ struct mddev_s struct gendisk *gendisk; struct kobject kobj; + int hold_active; +#define UNTIL_IOCTL 1 +#define UNTIL_STOP 2 /* Superblock information */ int major_version, @@ -215,6 +218,9 @@ struct mddev_s #define MD_RECOVERY_FROZEN 9 unsigned long recovery; + int recovery_disabled; /* if we detect that recovery + * will always fail, set this + * so we don't loop trying */ int in_sync; /* know to not need resync */ struct mutex reconfig_mutex; @@ -244,6 +250,9 @@ struct mddev_s struct sysfs_dirent *sysfs_state; /* handle for 'array_state' * file in sysfs. */ + struct sysfs_dirent *sysfs_action; /* handle for 'sync_action' */ + + struct work_struct del_work; /* used for delayed sysfs removal */ spinlock_t write_lock; wait_queue_head_t sb_wait; /* for waiting on superblock updates */ @@ -334,17 +343,14 @@ static inline char * mdname (mddev_t * mddev) * iterates through some rdev ringlist. It's safe to remove the * current 'rdev'. Dont touch 'tmp' though. */ -#define rdev_for_each_list(rdev, tmp, list) \ - \ - for ((tmp) = (list).next; \ - (rdev) = (list_entry((tmp), mdk_rdev_t, same_set)), \ - (tmp) = (tmp)->next, (tmp)->prev != &(list) \ - ; ) +#define rdev_for_each_list(rdev, tmp, head) \ + list_for_each_entry_safe(rdev, tmp, head, same_set) + /* * iterates through the 'same array disks' ringlist */ #define rdev_for_each(rdev, tmp, mddev) \ - rdev_for_each_list(rdev, tmp, (mddev)->disks) + list_for_each_entry_safe(rdev, tmp, &((mddev)->disks), same_set) #define rdev_for_each_rcu(rdev, mddev) \ list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set) diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 8b4de4a41ff..9491026afe6 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -194,6 +194,8 @@ static inline __u64 md_event(mdp_super_t *sb) { return (ev<<32)| sb->events_lo; } +#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) + /* * The version-1 superblock : * All numeric fields are little-endian. diff --git a/include/linux/raid/raid0.h b/include/linux/raid/raid0.h index 1b2dda035f8..fd42aa87c39 100644 --- a/include/linux/raid/raid0.h +++ b/include/linux/raid/raid0.h @@ -5,9 +5,9 @@ struct strip_zone { - sector_t zone_offset; /* Zone offset in md_dev */ - sector_t dev_offset; /* Zone offset in real dev */ - sector_t size; /* Zone size */ + sector_t zone_start; /* Zone offset in md_dev (in sectors) */ + sector_t dev_start; /* Zone offset in real dev (in sectors) */ + sector_t sectors; /* Zone size in sectors */ int nb_dev; /* # of devices attached to the zone */ mdk_rdev_t **dev; /* Devices attached to the zone */ }; @@ -19,8 +19,8 @@ struct raid0_private_data mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */ int nr_strip_zones; - sector_t hash_spacing; - int preshift; /* shift this before divide by hash_spacing */ + sector_t spacing; + int sector_shift; /* shift this before divide by spacing */ }; typedef struct raid0_private_data raid0_conf_t; diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h index 344bc3495dd..9c295411d01 100644 --- a/include/linux/rbtree.h +++ b/include/linux/rbtree.h @@ -140,10 +140,10 @@ extern void rb_insert_color(struct rb_node *, struct rb_root *); extern void rb_erase(struct rb_node *, struct rb_root *); /* Find logical next and previous nodes in a tree */ -extern struct rb_node *rb_next(struct rb_node *); -extern struct rb_node *rb_prev(struct rb_node *); -extern struct rb_node *rb_first(struct rb_root *); -extern struct rb_node *rb_last(struct rb_root *); +extern struct rb_node *rb_next(const struct rb_node *); +extern struct rb_node *rb_prev(const struct rb_node *); +extern struct rb_node *rb_first(const struct rb_root *); +extern struct rb_node *rb_last(const struct rb_root *); /* Fast replacement of a single node without remove/rebalance/add/rebalance */ extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index afdc4558bb9..801bf77ff4e 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -104,10 +104,10 @@ struct regulator; /** * struct regulator_bulk_data - Data used for bulk regulator operations. * - * @supply The name of the supply. Initialised by the user before - * using the bulk regulator APIs. - * @consumer The regulator consumer for the supply. This will be managed - * by the bulk API. + * @supply: The name of the supply. Initialised by the user before + * using the bulk regulator APIs. + * @consumer: The regulator consumer for the supply. This will be managed + * by the bulk API. * * The regulator APIs provide a series of regulator_bulk_() API calls as * a convenience to consumers which require multiple supplies. This diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index e37d8056198..2dae05705f1 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -24,7 +24,33 @@ struct regulator_init_data; /** * struct regulator_ops - regulator operations. * - * This struct describes regulator operations. + * This struct describes regulator operations which can be implemented by + * regulator chip drivers. + * + * @enable: Enable the regulator. + * @disable: Disable the regulator. + * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. + * + * @set_voltage: Set the voltage for the regulator within the range specified. + * The driver should select the voltage closest to min_uV. + * @get_voltage: Return the currently configured voltage for the regulator. + * + * @set_current_limit: Configure a limit for a current-limited regulator. + * @get_current_limit: Get the limit for a current-limited regulator. + * + * @set_mode: Set the operating mode for the regulator. + * @get_mode: Get the current operating mode for the regulator. + * @get_optimum_mode: Get the most efficient operating mode for the regulator + * when running with the specified parameters. + * + * @set_suspend_voltage: Set the voltage for the regulator when the system + * is suspended. + * @set_suspend_enable: Mark the regulator as enabled when the system is + * suspended. + * @set_suspend_disable: Mark the regulator as disabled when the system is + * suspended. + * @set_suspend_mode: Set the operating mode for the regulator when the + * system is suspended. */ struct regulator_ops { @@ -75,6 +101,15 @@ enum regulator_type { /** * struct regulator_desc - Regulator descriptor * + * Each regulator registered with the core is described with a structure of + * this type. + * + * @name: Identifying name for the regulator. + * @id: Numerical identifier for the regulator. + * @ops: Regulator operations table. + * @irq: Interrupt number for the regulator. + * @type: Indicates if the regulator is a voltage or current regulator. + * @owner: Module providing the regulator, used for refcounting. */ struct regulator_desc { const char *name; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index c6d69331a81..3794773b23d 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -44,6 +44,10 @@ struct regulator; * struct regulator_state - regulator state during low power syatem states * * This describes a regulators state during a system wide low power state. + * + * @uV: Operating voltage during suspend. + * @mode: Operating mode during suspend. + * @enabled: Enabled during suspend. */ struct regulator_state { int uV; /* suspend voltage */ @@ -55,6 +59,30 @@ struct regulator_state { * struct regulation_constraints - regulator operating constraints. * * This struct describes regulator and board/machine specific constraints. + * + * @name: Descriptive name for the constraints, used for display purposes. + * + * @min_uV: Smallest voltage consumers may set. + * @max_uV: Largest voltage consumers may set. + * + * @min_uA: Smallest consumers consumers may set. + * @max_uA: Largest current consumers may set. + * + * @valid_modes_mask: Mask of modes which may be configured by consumers. + * @valid_ops_mask: Operations which may be performed by consumers. + * + * @always_on: Set if the regulator should never be disabled. + * @boot_on: Set if the regulator is enabled when the system is initially + * started. + * @apply_uV: Apply the voltage constraint when initialising. + * + * @input_uV: Input voltage for regulator when supplied by another regulator. + * + * @state_disk: State for regulator when system is suspended in disk mode. + * @state_mem: State for regulator when system is suspended in mem mode. + * @state_standby: State for regulator when system is suspended in standby + * mode. + * @initial_state: Suspend state to set by default. */ struct regulation_constraints { @@ -93,6 +121,9 @@ struct regulation_constraints { * struct regulator_consumer_supply - supply -> device mapping * * This maps a supply name to a device. + * + * @dev: Device structure for the consumer. + * @supply: Name for the supply. */ struct regulator_consumer_supply { struct device *dev; /* consumer */ @@ -103,6 +134,16 @@ struct regulator_consumer_supply { * struct regulator_init_data - regulator platform initialisation data. * * Initialisation constraints, our supply and consumers supplies. + * + * @supply_regulator_dev: Parent regulator (if any). + * + * @constraints: Constraints. These must be specified for the regulator to + * be usable. + * @num_consumer_supplies: Number of consumer device supplies. + * @consumer_supplies: Consumer device supply configuration. + * + * @regulator_init: Callback invoked when the regulator has been registered. + * @driver_data: Data passed to regulator_init. */ struct regulator_init_data { struct device *supply_regulator_dev; /* or NULL for LINE */ diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 271c1c2c9f6..4c5bcf6ca7e 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -9,7 +9,7 @@ * * Author: Pavel Emelianov <xemul@openvz.org> * - * See Documentation/controllers/resource_counter.txt for more + * See Documentation/cgroups/resource_counter.txt for more * info about what this counter is. */ @@ -43,6 +43,10 @@ struct res_counter { * the routines below consider this to be IRQ-safe */ spinlock_t lock; + /* + * Parent counter, used for hierarchial resource accounting + */ + struct res_counter *parent; }; /** @@ -87,7 +91,7 @@ enum { * helpers for accounting */ -void res_counter_init(struct res_counter *counter); +void res_counter_init(struct res_counter *counter, struct res_counter *parent); /* * charge - try to consume more resource. @@ -103,7 +107,7 @@ void res_counter_init(struct res_counter *counter); int __must_check res_counter_charge_locked(struct res_counter *counter, unsigned long val); int __must_check res_counter_charge(struct res_counter *counter, - unsigned long val); + unsigned long val, struct res_counter **limit_fail_at); /* * uncharge - tell that some portion of the resource is released diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index b4199841f1f..90bbbf0b116 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -161,6 +161,9 @@ #define PORT_S3C6400 84 +/* NWPSERIAL */ +#define PORT_NWPSERIAL 85 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/linux/smp.h b/include/linux/smp.h index b8246696810..715196b09d6 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -24,6 +24,9 @@ struct call_single_data { /* total number of cpus in this system (may exceed NR_CPUS) */ extern unsigned int total_cpus; +int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, + int wait); + #ifdef CONFIG_SMP #include <linux/preempt.h> @@ -79,8 +82,6 @@ smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info, return 0; } -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait); void __smp_call_function_single(int cpuid, struct call_single_data *data); /* @@ -140,14 +141,6 @@ static inline int up_smp_call_function(void (*func)(void *), void *info) static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) -#define smp_call_function_single(cpuid, func, info, wait) \ -({ \ - WARN_ON(cpuid != 0); \ - local_irq_disable(); \ - (func)(info); \ - local_irq_enable(); \ - 0; \ -}) #define smp_call_function_mask(mask, func, info, wait) \ (up_smp_call_function(func, info)) #define smp_call_function_many(mask, func, info, wait) \ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 82229317753..68bb1c501d0 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -327,9 +327,9 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) - * @speed_hz: Select a speed other then the device default for this + * @speed_hz: Select a speed other than the device default for this * transfer. If 0 the default (from @spi_device) is used. - * @bits_per_word: select a bits_per_word other then the device default + * @bits_per_word: select a bits_per_word other than the device default * for this transfer. If 0 the default (from @spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before diff --git a/include/linux/spi/tdo24m.h b/include/linux/spi/tdo24m.h new file mode 100644 index 00000000000..7572d4e1fe7 --- /dev/null +++ b/include/linux/spi/tdo24m.h @@ -0,0 +1,13 @@ +#ifndef __TDO24M_H__ +#define __TDO24M_H__ + +enum tdo24m_model { + TDO24M, + TDO35S, +}; + +struct tdo24m_platform_data { + enum tdo24m_model model; +}; + +#endif /* __TDO24M_H__ */ diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 3afe7fb403b..3435d24bfe5 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -58,10 +58,13 @@ struct svc_serv { struct svc_stat * sv_stats; /* RPC statistics */ spinlock_t sv_lock; unsigned int sv_nrthreads; /* # of server threads */ + unsigned int sv_maxconn; /* max connections allowed or + * '0' causing max to be based + * on number of threads. */ + unsigned int sv_max_payload; /* datagram payload size */ unsigned int sv_max_mesg; /* max_payload + 1 page for overheads */ unsigned int sv_xdrsize; /* XDR buffer size */ - struct list_head sv_permsocks; /* all permanent sockets */ struct list_head sv_tempsocks; /* all temporary sockets */ int sv_tmpcnt; /* count of temporary sockets */ diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 2ce8207686e..2b409c44db8 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -232,6 +232,11 @@ extern unsigned long get_safe_page(gfp_t gfp_mask); extern void hibernation_set_ops(struct platform_hibernation_ops *ops); extern int hibernate(void); +extern int hibernate_nvs_register(unsigned long start, unsigned long size); +extern int hibernate_nvs_alloc(void); +extern void hibernate_nvs_free(void); +extern void hibernate_nvs_save(void); +extern void hibernate_nvs_restore(void); #else /* CONFIG_HIBERNATION */ static inline int swsusp_page_is_forbidden(struct page *p) { return 0; } static inline void swsusp_set_page_free(struct page *p) {} @@ -239,6 +244,14 @@ static inline void swsusp_unset_page_free(struct page *p) {} static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {} static inline int hibernate(void) { return -ENOSYS; } +static inline int hibernate_nvs_register(unsigned long a, unsigned long b) +{ + return 0; +} +static inline int hibernate_nvs_alloc(void) { return 0; } +static inline void hibernate_nvs_free(void) {} +static inline void hibernate_nvs_save(void) {} +static inline void hibernate_nvs_restore(void) {} #endif /* CONFIG_HIBERNATION */ #ifdef CONFIG_PM_SLEEP diff --git a/include/linux/swab.h b/include/linux/swab.h index be5284d4a05..ea0c02fd516 100644 --- a/include/linux/swab.h +++ b/include/linux/swab.h @@ -3,7 +3,7 @@ #include <linux/types.h> #include <linux/compiler.h> -#include <asm/byteorder.h> +#include <asm/swab.h> /* * casts are necessary for constants, because we never know how for sure diff --git a/include/linux/swap.h b/include/linux/swap.h index 91dee50fe26..d3021557887 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -214,7 +214,8 @@ static inline void lru_cache_add_active_file(struct page *page) extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask); extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, - gfp_t gfp_mask); + gfp_t gfp_mask, bool noswap, + unsigned int swappiness); extern int __isolate_lru_page(struct page *page, int mode, int file); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; @@ -333,6 +334,22 @@ static inline void disable_swap_token(void) put_swap_token(swap_token_mm); } +#ifdef CONFIG_CGROUP_MEM_RES_CTLR +extern void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent); +#else +static inline void +mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) +{ +} +#endif +#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +extern void mem_cgroup_uncharge_swap(swp_entry_t ent); +#else +static inline void mem_cgroup_uncharge_swap(swp_entry_t ent) +{ +} +#endif + #else /* CONFIG_SWAP */ #define nr_swap_pages 0L @@ -409,6 +426,12 @@ static inline swp_entry_t get_swap_page(void) #define has_swap_token(x) 0 #define disable_swap_token() do { } while(0) +static inline int mem_cgroup_cache_charge_swapin(struct page *page, + struct mm_struct *mm, gfp_t mask, bool locked) +{ + return 0; +} + #endif /* CONFIG_SWAP */ #endif /* __KERNEL__*/ #endif /* _LINUX_SWAP_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 18d0a243a7b..16875f89e6a 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -54,6 +54,7 @@ struct compat_stat; struct compat_timeval; struct robust_list_head; struct getcpu_cache; +struct old_linux_dirent; #include <linux/types.h> #include <linux/aio_abi.h> @@ -65,6 +66,74 @@ struct getcpu_cache; #include <linux/quota.h> #include <linux/key.h> +#define __SC_DECL1(t1, a1) t1 a1 +#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) +#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__) +#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__) +#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__) +#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__) + +#define __SC_LONG1(t1, a1) long a1 +#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__) +#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__) +#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__) +#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__) +#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__) + +#define __SC_CAST1(t1, a1) (t1) a1 +#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__) +#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__) +#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__) +#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__) +#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__) + +#define __SC_TEST(type) BUILD_BUG_ON(sizeof(type) > sizeof(long)) +#define __SC_TEST1(t1, a1) __SC_TEST(t1) +#define __SC_TEST2(t2, a2, ...) __SC_TEST(t2); __SC_TEST1(__VA_ARGS__) +#define __SC_TEST3(t3, a3, ...) __SC_TEST(t3); __SC_TEST2(__VA_ARGS__) +#define __SC_TEST4(t4, a4, ...) __SC_TEST(t4); __SC_TEST3(__VA_ARGS__) +#define __SC_TEST5(t5, a5, ...) __SC_TEST(t5); __SC_TEST4(__VA_ARGS__) +#define __SC_TEST6(t6, a6, ...) __SC_TEST(t6); __SC_TEST5(__VA_ARGS__) + +#define SYSCALL_DEFINE0(name) asmlinkage long sys_##name(void) +#define SYSCALL_DEFINE1(...) SYSCALL_DEFINEx(1, __VA_ARGS__) +#define SYSCALL_DEFINE2(...) SYSCALL_DEFINEx(2, __VA_ARGS__) +#define SYSCALL_DEFINE3(...) SYSCALL_DEFINEx(3, __VA_ARGS__) +#define SYSCALL_DEFINE4(...) SYSCALL_DEFINEx(4, __VA_ARGS__) +#define SYSCALL_DEFINE5(...) SYSCALL_DEFINEx(5, __VA_ARGS__) +#define SYSCALL_DEFINE6(...) SYSCALL_DEFINEx(6, __VA_ARGS__) + +#ifdef CONFIG_PPC64 +#define SYSCALL_ALIAS(alias, name) \ + asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ + "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) +#else +#define SYSCALL_ALIAS(alias, name) \ + asm ("\t.globl " #alias "\n\t.set " #alias ", " #name) +#endif + +#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS + +#define SYSCALL_DEFINE(name) static inline long SYSC_##name +#define SYSCALL_DEFINEx(x, name, ...) \ + asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__)); \ + static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__)); \ + asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__)) \ + { \ + __SC_TEST##x(__VA_ARGS__); \ + return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__)); \ + } \ + SYSCALL_ALIAS(sys_##name, SyS_##name); \ + static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__)) + +#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */ + +#define SYSCALL_DEFINE(name) asmlinkage long sys_##name +#define SYSCALL_DEFINEx(x, name, ...) \ + asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__)) + +#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */ + asmlinkage long sys_time(time_t __user *tloc); asmlinkage long sys_stime(time_t __user *tptr); asmlinkage long sys_gettimeofday(struct timeval __user *tv, @@ -77,7 +146,7 @@ asmlinkage long sys_times(struct tms __user *tbuf); asmlinkage long sys_gettid(void); asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp); -asmlinkage unsigned long sys_alarm(unsigned int seconds); +asmlinkage long sys_alarm(unsigned int seconds); asmlinkage long sys_getpid(void); asmlinkage long sys_getppid(void); asmlinkage long sys_getuid(void); @@ -166,7 +235,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments, unsigned long flags); asmlinkage long sys_exit(int error_code); -asmlinkage void sys_exit_group(int error_code); +asmlinkage long sys_exit_group(int error_code); asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr, int options, struct rusage __user *ru); asmlinkage long sys_waitid(int which, pid_t pid, @@ -196,7 +265,7 @@ asmlinkage long sys_tkill(int pid, int sig); asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo); asmlinkage long sys_sgetmask(void); asmlinkage long sys_ssetmask(int newmask); -asmlinkage unsigned long sys_signal(int sig, __sighandler_t handler); +asmlinkage long sys_signal(int sig, __sighandler_t handler); asmlinkage long sys_pause(void); asmlinkage long sys_sync(void); @@ -246,29 +315,29 @@ asmlinkage long sys_lsetxattr(const char __user *path, const char __user *name, const void __user *value, size_t size, int flags); asmlinkage long sys_fsetxattr(int fd, const char __user *name, const void __user *value, size_t size, int flags); -asmlinkage ssize_t sys_getxattr(const char __user *path, const char __user *name, - void __user *value, size_t size); -asmlinkage ssize_t sys_lgetxattr(const char __user *path, const char __user *name, - void __user *value, size_t size); -asmlinkage ssize_t sys_fgetxattr(int fd, const char __user *name, - void __user *value, size_t size); -asmlinkage ssize_t sys_listxattr(const char __user *path, char __user *list, - size_t size); -asmlinkage ssize_t sys_llistxattr(const char __user *path, char __user *list, - size_t size); -asmlinkage ssize_t sys_flistxattr(int fd, char __user *list, size_t size); +asmlinkage long sys_getxattr(const char __user *path, const char __user *name, + void __user *value, size_t size); +asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name, + void __user *value, size_t size); +asmlinkage long sys_fgetxattr(int fd, const char __user *name, + void __user *value, size_t size); +asmlinkage long sys_listxattr(const char __user *path, char __user *list, + size_t size); +asmlinkage long sys_llistxattr(const char __user *path, char __user *list, + size_t size); +asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size); asmlinkage long sys_removexattr(const char __user *path, const char __user *name); asmlinkage long sys_lremovexattr(const char __user *path, const char __user *name); asmlinkage long sys_fremovexattr(int fd, const char __user *name); -asmlinkage unsigned long sys_brk(unsigned long brk); +asmlinkage long sys_brk(unsigned long brk); asmlinkage long sys_mprotect(unsigned long start, size_t len, unsigned long prot); -asmlinkage unsigned long sys_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr); +asmlinkage long sys_mremap(unsigned long addr, + unsigned long old_len, unsigned long new_len, + unsigned long flags, unsigned long new_addr); asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size, unsigned long prot, unsigned long pgoff, unsigned long flags); @@ -321,10 +390,10 @@ asmlinkage long sys_io_submit(aio_context_t, long, struct iocb __user * __user *); asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb, struct io_event __user *result); -asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd, - off_t __user *offset, size_t count); -asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd, - loff_t __user *offset, size_t count); +asmlinkage long sys_sendfile(int out_fd, int in_fd, + off_t __user *offset, size_t count); +asmlinkage long sys_sendfile64(int out_fd, int in_fd, + loff_t __user *offset, size_t count); asmlinkage long sys_readlink(const char __user *path, char __user *buf, int bufsiz); asmlinkage long sys_creat(const char __user *pathname, int mode); @@ -368,26 +437,25 @@ asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times); asmlinkage long sys_utimes(char __user *filename, struct timeval __user *utimes); -asmlinkage off_t sys_lseek(unsigned int fd, off_t offset, - unsigned int origin); +asmlinkage long sys_lseek(unsigned int fd, off_t offset, + unsigned int origin); asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high, unsigned long offset_low, loff_t __user *result, unsigned int origin); -asmlinkage ssize_t sys_read(unsigned int fd, char __user *buf, - size_t count); -asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count); -asmlinkage ssize_t sys_readv(unsigned long fd, - const struct iovec __user *vec, - unsigned long vlen); -asmlinkage ssize_t sys_write(unsigned int fd, const char __user *buf, - size_t count); -asmlinkage ssize_t sys_writev(unsigned long fd, - const struct iovec __user *vec, - unsigned long vlen); -asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf, - size_t count, loff_t pos); -asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf, - size_t count, loff_t pos); +asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count); +asmlinkage long sys_readahead(int fd, loff_t offset, size_t count); +asmlinkage long sys_readv(unsigned long fd, + const struct iovec __user *vec, + unsigned long vlen); +asmlinkage long sys_write(unsigned int fd, const char __user *buf, + size_t count); +asmlinkage long sys_writev(unsigned long fd, + const struct iovec __user *vec, + unsigned long vlen); +asmlinkage long sys_pread64(unsigned int fd, char __user *buf, + size_t count, loff_t pos); +asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf, + size_t count, loff_t pos); asmlinkage long sys_getcwd(char __user *buf, unsigned long size); asmlinkage long sys_mkdir(const char __user *pathname, int mode); asmlinkage long sys_chdir(const char __user *filename); @@ -476,7 +544,7 @@ asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf); asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr); asmlinkage long sys_mq_unlink(const char __user *name); asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout); -asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout); +asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout); asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification); asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat); @@ -530,11 +598,6 @@ asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages, const int __user *nodes, int __user *status, int flags); -asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page, - __u32 __user *pages, - const int __user *nodes, - int __user *status, - int flags); asmlinkage long sys_mbind(unsigned long start, unsigned long len, unsigned long mode, unsigned long __user *nmask, @@ -583,13 +646,6 @@ asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *bu int bufsiz); asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __user *utimes, int flags); -asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename, - struct compat_timeval __user *t); -asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename, - struct compat_stat __user *statbuf, - int flag); -asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename, - int flags, int mode); asmlinkage long sys_unshare(unsigned long unshare_flags); asmlinkage long sys_splice(int fd_in, loff_t __user *off_in, @@ -621,6 +677,15 @@ asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr); asmlinkage long sys_eventfd(unsigned int count); asmlinkage long sys_eventfd2(unsigned int count, int flags); asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len); +asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int); +asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *, + fd_set __user *, struct timespec __user *, + void __user *); +asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int, + struct timespec __user *, const sigset_t __user *, + size_t); +asmlinkage long sys_pipe2(int __user *, int); +asmlinkage long sys_pipe(int __user *); int kernel_execve(const char *filename, char *const argv[], char *const envp[]); diff --git a/include/linux/types.h b/include/linux/types.h index 3b864f2d956..712ca53bc34 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -176,10 +176,9 @@ typedef __u16 __bitwise __le16; typedef __u16 __bitwise __be16; typedef __u32 __bitwise __le32; typedef __u32 __bitwise __be32; -#if defined(__GNUC__) typedef __u64 __bitwise __le64; typedef __u64 __bitwise __be64; -#endif + typedef __u16 __bitwise __sum16; typedef __u32 __bitwise __wsum; diff --git a/include/linux/usb.h b/include/linux/usb.h index f72aa51f7bc..85ee9be9361 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -108,6 +108,7 @@ enum usb_interface_condition { * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. * @sysfs_files_created: sysfs attributes exist + * @ep_devs_created: endpoint child pseudo-devices exist * @unregistering: flag set when the interface is being unregistered * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. @@ -120,6 +121,11 @@ enum usb_interface_condition { * to the sysfs representation for that device. * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not * allowed unless the counter is 0. + * @reset_ws: Used for scheduling resets from atomic context. + * @reset_running: set to 1 if the interface is currently running a + * queued reset so that usb_cancel_queued_reset() doesn't try to + * remove from the workqueue when running inside the worker + * thread. See __usb_queue_reset_device(). * * USB device drivers attach to interfaces on a physical device. Each * interface encapsulates a single high level function, such as feeding @@ -164,14 +170,17 @@ struct usb_interface { enum usb_interface_condition condition; /* state of binding */ unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ + unsigned ep_devs_created:1; /* endpoint "devices" exist */ unsigned unregistering:1; /* unregistration is in progress */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ + unsigned reset_running:1; struct device dev; /* interface specific device info */ struct device *usb_dev; int pm_usage_cnt; /* usage counter for autosuspend */ + struct work_struct reset_ws; /* for resets in atomic context */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) #define interface_to_usbdev(intf) \ @@ -329,7 +338,7 @@ struct usb_bus { #endif struct device *dev; /* device for this bus */ -#if defined(CONFIG_USB_MON) +#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) struct mon_bus *mon_bus; /* non-null when associated */ int monitored; /* non-zero when monitored */ #endif @@ -398,6 +407,7 @@ struct usb_tt; * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended * @autosuspend: for delayed autosuspends + * @autoresume: for autoresumes requested while in_interrupt * @pm_mutex: protects PM operations * @last_busy: time of last use * @autosuspend_delay: in jiffies @@ -476,6 +486,7 @@ struct usb_device { #ifdef CONFIG_PM struct delayed_work autosuspend; + struct work_struct autoresume; struct mutex pm_mutex; unsigned long last_busy; @@ -505,6 +516,7 @@ extern int usb_lock_device_for_reset(struct usb_device *udev, /* USB port reset for device reinitialization */ extern int usb_reset_device(struct usb_device *dev); +extern void usb_queue_reset_device(struct usb_interface *dev); extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); @@ -513,6 +525,8 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); extern int usb_autopm_set_interface(struct usb_interface *intf); extern int usb_autopm_get_interface(struct usb_interface *intf); extern void usb_autopm_put_interface(struct usb_interface *intf); +extern int usb_autopm_get_interface_async(struct usb_interface *intf); +extern void usb_autopm_put_interface_async(struct usb_interface *intf); static inline void usb_autopm_enable(struct usb_interface *intf) { @@ -539,8 +553,13 @@ static inline int usb_autopm_set_interface(struct usb_interface *intf) static inline int usb_autopm_get_interface(struct usb_interface *intf) { return 0; } +static inline int usb_autopm_get_interface_async(struct usb_interface *intf) +{ return 0; } + static inline void usb_autopm_put_interface(struct usb_interface *intf) { } +static inline void usb_autopm_put_interface_async(struct usb_interface *intf) +{ } static inline void usb_autopm_enable(struct usb_interface *intf) { } static inline void usb_autopm_disable(struct usb_interface *intf) @@ -1050,7 +1069,7 @@ struct usb_device_driver { void (*disconnect) (struct usb_device *udev); int (*suspend) (struct usb_device *udev, pm_message_t message); - int (*resume) (struct usb_device *udev); + int (*resume) (struct usb_device *udev, pm_message_t message); struct usbdrv_wrap drvwrap; unsigned int supports_autosuspend:1; }; @@ -1321,7 +1340,7 @@ struct urb { struct kref kref; /* reference count of the URB */ void *hcpriv; /* private data for host controller */ atomic_t use_count; /* concurrent submissions counter */ - u8 reject; /* submissions will fail */ + atomic_t reject; /* submissions will fail */ int unlinked; /* unlink error code */ /* public: documented fields in the urb that can be used by drivers */ @@ -1466,6 +1485,7 @@ extern void usb_poison_urb(struct urb *urb); extern void usb_unpoison_urb(struct urb *urb); extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); +extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); extern void usb_unanchor_urb(struct urb *urb); @@ -1722,10 +1742,6 @@ extern void usb_unregister_notify(struct notifier_block *nb); #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ - format "\n" , ## arg) -#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \ - format "\n" , ## arg) #endif /* __KERNEL__ */ diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h index 07c5e3cf589..0a4a18b3c1b 100644 --- a/include/linux/usb/association.h +++ b/include/linux/usb/association.h @@ -28,17 +28,17 @@ struct wusb_am_attr { }; /* Different fields defined by the spec */ -#define WUSB_AR_AssociationTypeId { .id = 0x0000, .len = 2 } -#define WUSB_AR_AssociationSubTypeId { .id = 0x0001, .len = 2 } -#define WUSB_AR_Length { .id = 0x0002, .len = 4 } -#define WUSB_AR_AssociationStatus { .id = 0x0004, .len = 4 } -#define WUSB_AR_LangID { .id = 0x0008, .len = 2 } -#define WUSB_AR_DeviceFriendlyName { .id = 0x000b, .len = 64 } /* max */ -#define WUSB_AR_HostFriendlyName { .id = 0x000c, .len = 64 } /* max */ -#define WUSB_AR_CHID { .id = 0x1000, .len = 16 } -#define WUSB_AR_CDID { .id = 0x1001, .len = 16 } -#define WUSB_AR_ConnectionContext { .id = 0x1002, .len = 48 } -#define WUSB_AR_BandGroups { .id = 0x1004, .len = 2 } +#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) } +#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) } +#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) } +#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) } +#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) } +#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */ +#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */ +#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) } +#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) } +#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) } +#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) } /* CBAF Control Requests (AMS1.0[T4-1] */ enum { diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h new file mode 100644 index 00000000000..d9f03ccc2d6 --- /dev/null +++ b/include/linux/usb/gpio_vbus.h @@ -0,0 +1,30 @@ +/* + * A simple GPIO VBUS sensing driver for B peripheral only devices + * with internal transceivers. + * Optionally D+ pullup can be controlled by a second GPIO. + * + * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/** + * struct gpio_vbus_mach_info - configuration for gpio_vbus + * @gpio_vbus: VBUS sensing GPIO + * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) + * @gpio_vbus_inverted: true if gpio_vbus is active low + * @gpio_pullup_inverted: true if gpio_pullup is active low + * + * The VBUS sensing GPIO should have a pulldown, which will normally be + * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a + * value the GPIO detects as active. Some systems will use comparators. + */ +struct gpio_vbus_mach_info { + int gpio_vbus; + int gpio_pullup; + bool gpio_vbus_inverted; + bool gpio_pullup_inverted; +}; diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 630962c04ca..d6aad0ea603 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -47,6 +47,11 @@ struct musb_hdrc_config { u8 ram_bits; /* ram address size */ struct musb_hdrc_eps_bits *eps_bits; +#ifdef CONFIG_BLACKFIN + /* A GPIO controlling VRSEL in Blackfin */ + unsigned int gpio_vrsel; +#endif + }; struct musb_hdrc_platform_data { diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 1db25d152ad..94df4fe6c6c 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -84,6 +84,7 @@ extern int otg_set_transceiver(struct otg_transceiver *); /* for usb host and peripheral controller drivers */ extern struct otg_transceiver *otg_get_transceiver(void); +extern void otg_put_transceiver(struct otg_transceiver *); static inline int otg_start_hnp(struct otg_transceiver *otg) diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index d9a3bbe38e6..1eea1ab68dc 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -52,8 +52,11 @@ US_FLAG(MAX_SECTORS_MIN,0x00002000) \ /* Sets max_sectors to arch min */ \ US_FLAG(BULK_IGNORE_TAG,0x00004000) \ - /* Ignore tag mismatch in bulk operations */ - + /* Ignore tag mismatch in bulk operations */ \ + US_FLAG(SANE_SENSE, 0x00008000) \ + /* Sane Sense (> 18 bytes) */ \ + US_FLAG(CAPACITY_OK, 0x00010000) \ + /* READ CAPACITY response is correct */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/include/linux/wimax.h b/include/linux/wimax.h new file mode 100644 index 00000000000..c89de7f4e5b --- /dev/null +++ b/include/linux/wimax.h @@ -0,0 +1,234 @@ +/* + * Linux WiMax + * API for user space + * + * + * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Intel Corporation <linux-wimax@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Initial implementation + * + * + * This file declares the user/kernel protocol that is spoken over + * Generic Netlink, as well as any type declaration that is to be used + * by kernel and user space. + * + * It is intended for user space to clone it verbatim to use it as a + * primary reference for definitions. + * + * Stuff intended for kernel usage as well as full protocol and stack + * documentation is rooted in include/net/wimax.h. + */ + +#ifndef __LINUX__WIMAX_H__ +#define __LINUX__WIMAX_H__ + +#include <linux/types.h> + +enum { + /** + * Version of the interface (unsigned decimal, MMm, max 25.5) + * M - Major: change if removing or modifying an existing call. + * m - minor: change when adding a new call + */ + WIMAX_GNL_VERSION = 00, + /* Generic NetLink attributes */ + WIMAX_GNL_ATTR_INVALID = 0x00, + WIMAX_GNL_ATTR_MAX = 10, +}; + + +/* + * Generic NetLink operations + * + * Most of these map to an API call; _OP_ stands for operation, _RP_ + * for reply and _RE_ for report (aka: signal). + */ +enum { + WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */ + WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */ + WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ + WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ + WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ +}; + + +/* Message from user / to user */ +enum { + WIMAX_GNL_MSG_IFIDX = 1, + WIMAX_GNL_MSG_PIPE_NAME, + WIMAX_GNL_MSG_DATA, +}; + + +/* + * wimax_rfkill() + * + * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's + * switch state (DISABLED/ENABLED). + */ +enum wimax_rf_state { + WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */ + WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */ + WIMAX_RF_QUERY = 2, +}; + +/* Attributes */ +enum { + WIMAX_GNL_RFKILL_IFIDX = 1, + WIMAX_GNL_RFKILL_STATE, +}; + + +/* Attributes for wimax_reset() */ +enum { + WIMAX_GNL_RESET_IFIDX = 1, +}; + + +/* + * Attributes for the Report State Change + * + * For now we just have the old and new states; new attributes might + * be added later on. + */ +enum { + WIMAX_GNL_STCH_IFIDX = 1, + WIMAX_GNL_STCH_STATE_OLD, + WIMAX_GNL_STCH_STATE_NEW, +}; + + +/** + * enum wimax_st - The different states of a WiMAX device + * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed, + * but still wimax_dev_add() hasn't been called. There is no state. + * + * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and + * networking stacks, but it is not initialized (normally that is + * done with 'ifconfig DEV up' [or equivalent], which can upload + * firmware and enable communications with the device). + * In this state, the device is powered down and using as less + * power as possible. + * This state is the default after a call to wimax_dev_add(). It + * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED + * or %WIMAX_ST_RADIO_OFF in _probe() after the call to + * wimax_dev_add(). + * It is recommended that the driver leaves this state when + * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV + * down'. + * + * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API + * operations are allowed to proceed except the ones needed to + * complete the device clean up process. + * + * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device + * is setup, but the device still requires some configuration + * before being operational. + * Some WiMAX API calls might work. + * + * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether + * by hardware or software switches). + * It is recommended to always leave the device in this state + * after initialization. + * + * @WIMAX_ST_READY: The device is fully up and radio is on. + * + * @WIMAX_ST_SCANNING: [optional] The device has been instructed to + * scan. In this state, the device cannot be actively connected to + * a network. + * + * @WIMAX_ST_CONNECTING: The device is connecting to a network. This + * state exists because in some devices, the connect process can + * include a number of negotiations between user space, kernel + * space and the device. User space needs to know what the device + * is doing. If the connect sequence in a device is atomic and + * fast, the device can transition directly to CONNECTED + * + * @WIMAX_ST_CONNECTED: The device is connected to a network. + * + * @__WIMAX_ST_INVALID: This is an invalid state used to mark the + * maximum numeric value of states. + * + * Description: + * + * Transitions from one state to another one are atomic and can only + * be caused in kernel space with wimax_state_change(). To read the + * state, use wimax_state_get(). + * + * States starting with __ are internal and shall not be used or + * referred to by drivers or userspace. They look ugly, but that's the + * point -- if any use is made non-internal to the stack, it is easier + * to catch on review. + * + * All API operations [with well defined exceptions] will take the + * device mutex before starting and then check the state. If the state + * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or + * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with + * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN. + * + * The order of the definitions is important, so we can do numerical + * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready + * to operate). + */ +/* + * The allowed state transitions are described in the table below + * (states in rows can go to states in columns where there is an X): + * + * UNINI RADIO READY SCAN CONNEC CONNEC + * NULL DOWN QUIESCING TIALIZED OFF NING TING TED + * NULL - x + * DOWN - x x x + * QUIESCING x - + * UNINITIALIZED x - x + * RADIO_OFF x - x + * READY x x - x x x + * SCANNING x x x - x x + * CONNECTING x x x x - x + * CONNECTED x x x - + * + * This table not available in kernel-doc because the formatting messes it up. + */ + enum wimax_st { + __WIMAX_ST_NULL = 0, + WIMAX_ST_DOWN, + __WIMAX_ST_QUIESCING, + WIMAX_ST_UNINITIALIZED, + WIMAX_ST_RADIO_OFF, + WIMAX_ST_READY, + WIMAX_ST_SCANNING, + WIMAX_ST_CONNECTING, + WIMAX_ST_CONNECTED, + __WIMAX_ST_INVALID /* Always keep last */ +}; + + +#endif /* #ifndef __LINUX__WIMAX_H__ */ diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild new file mode 100644 index 00000000000..3cb4f269bb0 --- /dev/null +++ b/include/linux/wimax/Kbuild @@ -0,0 +1 @@ +header-y += i2400m.h diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h new file mode 100644 index 00000000000..ba0c49399a8 --- /dev/null +++ b/include/linux/wimax/debug.h @@ -0,0 +1,453 @@ +/* + * Linux WiMAX + * Collection of tools to manage debug operations. + * + * + * Copyright (C) 2005-2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Don't #include this file directly, read on! + * + * + * EXECUTING DEBUGGING ACTIONS OR NOT + * + * The main thing this framework provides is decission power to take a + * debug action (like printing a message) if the current debug level + * allows it. + * + * The decission power is at two levels: at compile-time (what does + * not make it is compiled out) and at run-time. The run-time + * selection is done per-submodule (as they are declared by the user + * of the framework). + * + * A call to d_test(L) (L being the target debug level) returns true + * if the action should be taken because the current debug levels + * allow it (both compile and run time). + * + * It follows that a call to d_test() that can be determined to be + * always false at compile time will get the code depending on it + * compiled out by optimization. + * + * + * DEBUG LEVELS + * + * It is up to the caller to define how much a debugging level is. + * + * Convention sets 0 as "no debug" (so an action marked as debug level 0 + * will always be taken). The increasing debug levels are used for + * increased verbosity. + * + * + * USAGE + * + * Group the code in modules and submodules inside each module [which + * in most cases maps to Linux modules and .c files that compose + * those]. + * + * + * For each module, there is: + * + * - a MODULENAME (single word, legal C identifier) + * + * - a debug-levels.h header file that declares the list of + * submodules and that is included by all .c files that use + * the debugging tools. The file name can be anything. + * + * - some (optional) .c code to manipulate the runtime debug levels + * through debugfs. + * + * The debug-levels.h file would look like: + * + * #ifndef __debug_levels__h__ + * #define __debug_levels__h__ + * + * #define D_MODULENAME modulename + * #define D_MASTER 10 + * + * #include <linux/wimax/debug.h> + * + * enum d_module { + * D_SUBMODULE_DECLARE(submodule_1), + * D_SUBMODULE_DECLARE(submodule_2), + * ... + * D_SUBMODULE_DECLARE(submodule_N) + * }; + * + * #endif + * + * D_MASTER is the maximum compile-time debug level; any debug actions + * above this will be out. D_MODULENAME is the module name (legal C + * identifier), which has to be unique for each module (to avoid + * namespace collisions during linkage). Note those #defines need to + * be done before #including debug.h + * + * We declare N different submodules whose debug level can be + * independently controlled during runtime. + * + * In a .c file of the module (and only in one of them), define the + * following code: + * + * struct d_level D_LEVEL[] = { + * D_SUBMODULE_DEFINE(submodule_1), + * D_SUBMODULE_DEFINE(submodule_2), + * ... + * D_SUBMODULE_DEFINE(submodule_N), + * }; + * size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + * + * Externs for d_level_MODULENAME and d_level_size_MODULENAME are used + * and declared in this file using the D_LEVEL and D_LEVEL_SIZE macros + * #defined also in this file. + * + * To manipulate from user space the levels, create a debugfs dentry + * and then register each submodule with: + * + * result = d_level_register_debugfs("PREFIX_", submodule_X, parent); + * if (result < 0) + * goto error; + * + * Where PREFIX_ is a name of your chosing. This will create debugfs + * file with a single numeric value that can be use to tweak it. To + * remove the entires, just use debugfs_remove_recursive() on 'parent'. + * + * NOTE: remember that even if this will show attached to some + * particular instance of a device, the settings are *global*. + * + * + * On each submodule (for example, .c files), the debug infrastructure + * should be included like this: + * + * #define D_SUBMODULE submodule_x // matches one in debug-levels.h + * #include "debug-levels.h" + * + * after #including all your include files. + * + * + * Now you can use the d_*() macros below [d_test(), d_fnstart(), + * d_fnend(), d_printf(), d_dump()]. + * + * If their debug level is greater than D_MASTER, they will be + * compiled out. + * + * If their debug level is lower or equal than D_MASTER but greater + * than the current debug level of their submodule, they'll be + * ignored. + * + * Otherwise, the action will be performed. + */ +#ifndef __debug__h__ +#define __debug__h__ + +#include <linux/types.h> +#include <linux/device.h> + + +/* Backend stuff */ + +/* + * Debug backend: generate a message header from a 'struct device' + * + * @head: buffer where to place the header + * @head_size: length of @head + * @dev: pointer to device used to generate a header from. If NULL, + * an empty ("") header is generated. + */ +static inline +void __d_head(char *head, size_t head_size, + struct device *dev) +{ + if (dev == NULL) + head[0] = 0; + else if ((unsigned long)dev < 4096) { + printk(KERN_ERR "E: Corrupt dev %p\n", dev); + WARN_ON(1); + } else + snprintf(head, head_size, "%s %s: ", + dev_driver_string(dev), dev->bus_id); +} + + +/* + * Debug backend: log some message if debugging is enabled + * + * @l: intended debug level + * @tag: tag to prefix the message with + * @dev: 'struct device' associated to this message + * @f: printf-like format and arguments + * + * Note this is optimized out if it doesn't pass the compile-time + * check; however, it is *always* compiled. This is useful to make + * sure the printf-like formats and variables are always checked and + * they don't get bit rot if you have all the debugging disabled. + */ +#define _d_printf(l, tag, dev, f, a...) \ +do { \ + char head[64]; \ + if (!d_test(l)) \ + break; \ + __d_head(head, sizeof(head), dev); \ + printk(KERN_ERR "%s%s%s: " f, head, __func__, tag, ##a); \ +} while (0) + + +/* + * CPP sintatic sugar to generate A_B like symbol names when one of + * the arguments is a a preprocessor #define. + */ +#define __D_PASTE__(varname, modulename) varname##_##modulename +#define __D_PASTE(varname, modulename) (__D_PASTE__(varname, modulename)) +#define _D_SUBMODULE_INDEX(_name) (D_SUBMODULE_DECLARE(_name)) + + +/* + * Store a submodule's runtime debug level and name + */ +struct d_level { + u8 level; + const char *name; +}; + + +/* + * List of available submodules and their debug levels + * + * We call them d_level_MODULENAME and d_level_size_MODULENAME; the + * macros D_LEVEL and D_LEVEL_SIZE contain the name already for + * convenience. + * + * This array and the size are defined on some .c file that is part of + * the current module. + */ +#define D_LEVEL __D_PASTE(d_level, D_MODULENAME) +#define D_LEVEL_SIZE __D_PASTE(d_level_size, D_MODULENAME) + +extern struct d_level D_LEVEL[]; +extern size_t D_LEVEL_SIZE; + + +/* + * Frontend stuff + * + * + * Stuff you need to declare prior to using the actual "debug" actions + * (defined below). + */ + +#ifndef D_MODULENAME +#error D_MODULENAME is not defined in your debug-levels.h file +/** + * D_MODULE - Name of the current module + * + * #define in your module's debug-levels.h, making sure it is + * unique. This has to be a legal C identifier. + */ +#define D_MODULENAME undefined_modulename +#endif + + +#ifndef D_MASTER +#warning D_MASTER not defined, but debug.h included! [see docs] +/** + * D_MASTER - Compile time maximum debug level + * + * #define in your debug-levels.h file to the maximum debug level the + * runtime code will be allowed to have. This allows you to provide a + * main knob. + * + * Anything above that level will be optimized out of the compile. + * + * Defaults to zero (no debug code compiled in). + * + * Maximum one definition per module (at the debug-levels.h file). + */ +#define D_MASTER 0 +#endif + +#ifndef D_SUBMODULE +#error D_SUBMODULE not defined, but debug.h included! [see docs] +/** + * D_SUBMODULE - Name of the current submodule + * + * #define in your submodule .c file before #including debug-levels.h + * to the name of the current submodule as previously declared and + * defined with D_SUBMODULE_DECLARE() (in your module's + * debug-levels.h) and D_SUBMODULE_DEFINE(). + * + * This is used to provide runtime-control over the debug levels. + * + * Maximum one per .c file! Can be shared among different .c files + * (meaning they belong to the same submodule categorization). + */ +#define D_SUBMODULE undefined_module +#endif + + +/** + * D_SUBMODULE_DECLARE - Declare a submodule for runtime debug level control + * + * @_name: name of the submodule, restricted to the chars that make up a + * valid C identifier ([a-zA-Z0-9_]). + * + * Declare in the module's debug-levels.h header file as: + * + * enum d_module { + * D_SUBMODULE_DECLARE(submodule_1), + * D_SUBMODULE_DECLARE(submodule_2), + * D_SUBMODULE_DECLARE(submodule_3), + * }; + * + * Some corresponding .c file needs to have a matching + * D_SUBMODULE_DEFINE(). + */ +#define D_SUBMODULE_DECLARE(_name) __D_SUBMODULE_##_name + + +/** + * D_SUBMODULE_DEFINE - Define a submodule for runtime debug level control + * + * @_name: name of the submodule, restricted to the chars that make up a + * valid C identifier ([a-zA-Z0-9_]). + * + * Use once per module (in some .c file) as: + * + * static + * struct d_level d_level_SUBMODULENAME[] = { + * D_SUBMODULE_DEFINE(submodule_1), + * D_SUBMODULE_DEFINE(submodule_2), + * D_SUBMODULE_DEFINE(submodule_3), + * }; + * size_t d_level_size_SUBDMODULENAME = ARRAY_SIZE(d_level_SUBDMODULENAME); + * + * Matching D_SUBMODULE_DECLARE()s have to be present in a + * debug-levels.h header file. + */ +#define D_SUBMODULE_DEFINE(_name) \ +[__D_SUBMODULE_##_name] = { \ + .level = 0, \ + .name = #_name \ +} + + + +/* The actual "debug" operations */ + + +/** + * d_test - Returns true if debugging should be enabled + * + * @l: intended debug level (unsigned) + * + * If the master debug switch is enabled and the current settings are + * higher or equal to the requested level, then debugging + * output/actions should be enabled. + * + * NOTE: + * + * This needs to be coded so that it can be evaluated in compile + * time; this is why the ugly BUG_ON() is placed in there, so the + * D_MASTER evaluation compiles all out if it is compile-time false. + */ +#define d_test(l) \ +({ \ + unsigned __l = l; /* type enforcer */ \ + (D_MASTER) >= __l \ + && ({ \ + BUG_ON(_D_SUBMODULE_INDEX(D_SUBMODULE) >= D_LEVEL_SIZE);\ + D_LEVEL[_D_SUBMODULE_INDEX(D_SUBMODULE)].level >= __l; \ + }); \ +}) + + +/** + * d_fnstart - log message at function start if debugging enabled + * + * @l: intended debug level + * @_dev: 'struct device' pointer, NULL if none (for context) + * @f: printf-like format and arguments + */ +#define d_fnstart(l, _dev, f, a...) _d_printf(l, " FNSTART", _dev, f, ## a) + + +/** + * d_fnend - log message at function end if debugging enabled + * + * @l: intended debug level + * @_dev: 'struct device' pointer, NULL if none (for context) + * @f: printf-like format and arguments + */ +#define d_fnend(l, _dev, f, a...) _d_printf(l, " FNEND", _dev, f, ## a) + + +/** + * d_printf - log message if debugging enabled + * + * @l: intended debug level + * @_dev: 'struct device' pointer, NULL if none (for context) + * @f: printf-like format and arguments + */ +#define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a) + + +/** + * d_dump - log buffer hex dump if debugging enabled + * + * @l: intended debug level + * @_dev: 'struct device' pointer, NULL if none (for context) + * @f: printf-like format and arguments + */ +#define d_dump(l, dev, ptr, size) \ +do { \ + char head[64]; \ + if (!d_test(l)) \ + break; \ + __d_head(head, sizeof(head), dev); \ + print_hex_dump(KERN_ERR, head, 0, 16, 1, \ + ((void *) ptr), (size), 0); \ +} while (0) + + +/** + * Export a submodule's debug level over debugfs as PREFIXSUBMODULE + * + * @prefix: string to prefix the name with + * @submodule: name of submodule (not a string, just the name) + * @dentry: debugfs parent dentry + * + * Returns: 0 if ok, < 0 errno on error. + * + * For removing, just use debugfs_remove_recursive() on the parent. + */ +#define d_level_register_debugfs(prefix, name, parent) \ +({ \ + int rc; \ + struct dentry *fd; \ + struct dentry *verify_parent_type = parent; \ + fd = debugfs_create_u8( \ + prefix #name, 0600, verify_parent_type, \ + &(D_LEVEL[__D_SUBMODULE_ ## name].level)); \ + rc = PTR_ERR(fd); \ + if (IS_ERR(fd) && rc != -ENODEV) \ + printk(KERN_ERR "%s: Can't create debugfs entry %s: " \ + "%d\n", __func__, prefix #name, rc); \ + else \ + rc = 0; \ + rc; \ +}) + + +#endif /* #ifndef __debug__h__ */ diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h new file mode 100644 index 00000000000..74198f5bb4d --- /dev/null +++ b/include/linux/wimax/i2400m.h @@ -0,0 +1,512 @@ +/* + * Intel Wireless WiMax Connection 2400m + * Host-Device protocol interface definitions + * + * + * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Intel Corporation <linux-wimax@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Initial implementation + * + * + * This header defines the data structures and constants used to + * communicate with the device. + * + * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL + * + * The firmware upload protocol is quite simple and only requires a + * handful of commands. See drivers/net/wimax/i2400m/fw.c for more + * details. + * + * The BCF data structure is for the firmware file header. + * + * + * THE DATA / CONTROL PROTOCOL + * + * This is the normal protocol spoken with the device once the + * firmware is uploaded. It transports data payloads and control + * messages back and forth. + * + * It consists 'messages' that pack one or more payloads each. The + * format is described in detail in drivers/net/wimax/i2400m/rx.c and + * tx.c. + * + * + * THE L3L4 PROTOCOL + * + * The term L3L4 refers to Layer 3 (the device), Layer 4 (the + * driver/host software). + * + * This is the control protocol used by the host to control the i2400m + * device (scan, connect, disconnect...). This is sent to / received + * as control frames. These frames consist of a header and zero or + * more TLVs with information. We call each control frame a "message". + * + * Each message is composed of: + * + * HEADER + * [TLV0 + PAYLOAD0] + * [TLV1 + PAYLOAD1] + * [...] + * [TLVN + PAYLOADN] + * + * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are + * defined by a TLV structure (Type Length Value) which is a 'header' + * (struct i2400m_tlv_hdr) and then the payload. + * + * All integers are represented as Little Endian. + * + * - REQUESTS AND EVENTS + * + * The requests can be clasified as follows: + * + * COMMAND: implies a request from the host to the device requesting + * an action being performed. The device will reply with a + * message (with the same type as the command), status and + * no (TLV) payload. Execution of a command might cause + * events (of different type) to be sent later on as + * device's state changes. + * + * GET/SET: similar to COMMAND, but will not cause other + * EVENTs. The reply, in the case of GET, will contain + * TLVs with the requested information. + * + * EVENT: asynchronous messages sent from the device, maybe as a + * consequence of previous COMMANDs but disassociated from + * them. + * + * Only one request might be pending at the same time (ie: don't + * parallelize nor post another GET request before the previous + * COMMAND has been acknowledged with it's corresponding reply by the + * device). + * + * The different requests and their formats are described below: + * + * I2400M_MT_* Message types + * I2400M_MS_* Message status (for replies, events) + * i2400m_tlv_* TLVs + * + * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the + * operation. + */ + +#ifndef __LINUX__WIMAX__I2400M_H__ +#define __LINUX__WIMAX__I2400M_H__ + +#include <linux/types.h> + + +/* + * Host Device Interface (HDI) common to all busses + */ + +/* Boot-mode (firmware upload mode) commands */ + +/* Header for the firmware file */ +struct i2400m_bcf_hdr { + __le32 module_type; + __le32 header_len; + __le32 header_version; + __le32 module_id; + __le32 module_vendor; + __le32 date; /* BCD YYYMMDD */ + __le32 size; + __le32 key_size; /* in dwords */ + __le32 modulus_size; /* in dwords */ + __le32 exponent_size; /* in dwords */ + __u8 reserved[88]; +} __attribute__ ((packed)); + +/* Boot mode opcodes */ +enum i2400m_brh_opcode { + I2400M_BRH_READ = 1, + I2400M_BRH_WRITE = 2, + I2400M_BRH_JUMP = 3, + I2400M_BRH_SIGNED_JUMP = 8, + I2400M_BRH_HASH_PAYLOAD_ONLY = 9, +}; + +/* Boot mode command masks and stuff */ +enum i2400m_brh { + I2400M_BRH_SIGNATURE = 0xcbbc0000, + I2400M_BRH_SIGNATURE_MASK = 0xffff0000, + I2400M_BRH_SIGNATURE_SHIFT = 16, + I2400M_BRH_OPCODE_MASK = 0x0000000f, + I2400M_BRH_RESPONSE_MASK = 0x000000f0, + I2400M_BRH_RESPONSE_SHIFT = 4, + I2400M_BRH_DIRECT_ACCESS = 0x00000400, + I2400M_BRH_RESPONSE_REQUIRED = 0x00000200, + I2400M_BRH_USE_CHECKSUM = 0x00000100, +}; + + +/* Constants for bcf->module_id */ +enum i2400m_bcf_mod_id { + /* Firmware file carries its own pokes -- pokes are a set of + * magical values that have to be written in certain memory + * addresses to get the device up and ready for firmware + * download when it is in non-signed boot mode. */ + I2400M_BCF_MOD_ID_POKES = 0x000000001, +}; + + +/** + * i2400m_bootrom_header - Header for a boot-mode command + * + * @cmd: the above command descriptor + * @target_addr: where on the device memory should the action be performed. + * @data_size: for read/write, amount of data to be read/written + * @block_checksum: checksum value (if applicable) + * @payload: the beginning of data attached to this header + */ +struct i2400m_bootrom_header { + __le32 command; /* Compose with enum i2400_brh */ + __le32 target_addr; + __le32 data_size; + __le32 block_checksum; + char payload[0]; +} __attribute__ ((packed)); + + +/* + * Data / control protocol + */ + +/* Packet types for the host-device interface */ +enum i2400m_pt { + I2400M_PT_DATA = 0, + I2400M_PT_CTRL, + I2400M_PT_TRACE, /* For device debug */ + I2400M_PT_RESET_WARM, /* device reset */ + I2400M_PT_RESET_COLD, /* USB[transport] reset, like reconnect */ + I2400M_PT_ILLEGAL +}; + + +/* + * Payload for a data packet + * + * This is prefixed to each and every outgoing DATA type. + */ +struct i2400m_pl_data_hdr { + __le32 reserved; +} __attribute__((packed)); + + +/* Misc constants */ +enum { + I2400M_PL_PAD = 16, /* Payload data size alignment */ + I2400M_PL_SIZE_MAX = 0x3EFF, + I2400M_MAX_PLS_IN_MSG = 60, + /* protocol barkers: sync sequences; for notifications they + * are sent in groups of four. */ + I2400M_H2D_PREVIEW_BARKER = 0xcafe900d, + I2400M_COLD_RESET_BARKER = 0xc01dc01d, + I2400M_WARM_RESET_BARKER = 0x50f750f7, + I2400M_NBOOT_BARKER = 0xdeadbeef, + I2400M_SBOOT_BARKER = 0x0ff1c1a1, + I2400M_ACK_BARKER = 0xfeedbabe, + I2400M_D2H_MSG_BARKER = 0xbeefbabe, +}; + + +/* + * Hardware payload descriptor + * + * Bitfields encoded in a struct to enforce typing semantics. + * + * Look in rx.c and tx.c for a full description of the format. + */ +struct i2400m_pld { + __le32 val; +} __attribute__ ((packed)); + +#define I2400M_PLD_SIZE_MASK 0x00003fff +#define I2400M_PLD_TYPE_SHIFT 16 +#define I2400M_PLD_TYPE_MASK 0x000f0000 + +/* + * Header for a TX message or RX message + * + * @barker: preamble + * @size: used for management of the FIFO queue buffer; before + * sending, this is converted to be a real preamble. This + * indicates the real size of the TX message that starts at this + * point. If the highest bit is set, then this message is to be + * skipped. + * @sequence: sequence number of this message + * @offset: offset where the message itself starts -- see the comments + * in the file header about message header and payload descriptor + * alignment. + * @num_pls: number of payloads in this message + * @padding: amount of padding bytes at the end of the message to make + * it be of block-size aligned + * + * Look in rx.c and tx.c for a full description of the format. + */ +struct i2400m_msg_hdr { + union { + __le32 barker; + __u32 size; /* same size type as barker!! */ + }; + union { + __le32 sequence; + __u32 offset; /* same size type as barker!! */ + }; + __le16 num_pls; + __le16 rsv1; + __le16 padding; + __le16 rsv2; + struct i2400m_pld pld[0]; +} __attribute__ ((packed)); + + + +/* + * L3/L4 control protocol + */ + +enum { + /* Interface version */ + I2400M_L3L4_VERSION = 0x0100, +}; + +/* Message types */ +enum i2400m_mt { + I2400M_MT_RESERVED = 0x0000, + I2400M_MT_INVALID = 0xffff, + I2400M_MT_REPORT_MASK = 0x8000, + + I2400M_MT_GET_SCAN_RESULT = 0x4202, + I2400M_MT_SET_SCAN_PARAM = 0x4402, + I2400M_MT_CMD_RF_CONTROL = 0x4602, + I2400M_MT_CMD_SCAN = 0x4603, + I2400M_MT_CMD_CONNECT = 0x4604, + I2400M_MT_CMD_DISCONNECT = 0x4605, + I2400M_MT_CMD_EXIT_IDLE = 0x4606, + I2400M_MT_GET_LM_VERSION = 0x5201, + I2400M_MT_GET_DEVICE_INFO = 0x5202, + I2400M_MT_GET_LINK_STATUS = 0x5203, + I2400M_MT_GET_STATISTICS = 0x5204, + I2400M_MT_GET_STATE = 0x5205, + I2400M_MT_GET_MEDIA_STATUS = 0x5206, + I2400M_MT_SET_INIT_CONFIG = 0x5404, + I2400M_MT_CMD_INIT = 0x5601, + I2400M_MT_CMD_TERMINATE = 0x5602, + I2400M_MT_CMD_MODE_OF_OP = 0x5603, + I2400M_MT_CMD_RESET_DEVICE = 0x5604, + I2400M_MT_CMD_MONITOR_CONTROL = 0x5605, + I2400M_MT_CMD_ENTER_POWERSAVE = 0x5606, + I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201, + I2400M_MT_SET_EAP_SUCCESS = 0x6402, + I2400M_MT_SET_EAP_FAIL = 0x6403, + I2400M_MT_SET_EAP_KEY = 0x6404, + I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602, + I2400M_MT_REPORT_SCAN_RESULT = 0xc002, + I2400M_MT_REPORT_STATE = 0xd002, + I2400M_MT_REPORT_POWERSAVE_READY = 0xd005, + I2400M_MT_REPORT_EAP_REQUEST = 0xe002, + I2400M_MT_REPORT_EAP_RESTART = 0xe003, + I2400M_MT_REPORT_ALT_ACCEPT = 0xe004, + I2400M_MT_REPORT_KEY_REQUEST = 0xe005, +}; + + +/* + * Message Ack Status codes + * + * When a message is replied-to, this status is reported. + */ +enum i2400m_ms { + I2400M_MS_DONE_OK = 0, + I2400M_MS_DONE_IN_PROGRESS = 1, + I2400M_MS_INVALID_OP = 2, + I2400M_MS_BAD_STATE = 3, + I2400M_MS_ILLEGAL_VALUE = 4, + I2400M_MS_MISSING_PARAMS = 5, + I2400M_MS_VERSION_ERROR = 6, + I2400M_MS_ACCESSIBILITY_ERROR = 7, + I2400M_MS_BUSY = 8, + I2400M_MS_CORRUPTED_TLV = 9, + I2400M_MS_UNINITIALIZED = 10, + I2400M_MS_UNKNOWN_ERROR = 11, + I2400M_MS_PRODUCTION_ERROR = 12, + I2400M_MS_NO_RF = 13, + I2400M_MS_NOT_READY_FOR_POWERSAVE = 14, + I2400M_MS_THERMAL_CRITICAL = 15, + I2400M_MS_MAX +}; + + +/** + * i2400m_tlv - enumeration of the different types of TLVs + * + * TLVs stand for type-length-value and are the header for a payload + * composed of almost anything. Each payload has a type assigned + * and a length. + */ +enum i2400m_tlv { + I2400M_TLV_L4_MESSAGE_VERSIONS = 129, + I2400M_TLV_SYSTEM_STATE = 141, + I2400M_TLV_MEDIA_STATUS = 161, + I2400M_TLV_RF_OPERATION = 162, + I2400M_TLV_RF_STATUS = 163, + I2400M_TLV_DEVICE_RESET_TYPE = 132, + I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601, +}; + + +struct i2400m_tlv_hdr { + __le16 type; + __le16 length; /* payload's */ + __u8 pl[0]; +} __attribute__((packed)); + + +struct i2400m_l3l4_hdr { + __le16 type; + __le16 length; /* payload's */ + __le16 version; + __le16 resv1; + __le16 status; + __le16 resv2; + struct i2400m_tlv_hdr pl[0]; +} __attribute__((packed)); + + +/** + * i2400m_system_state - different states of the device + */ +enum i2400m_system_state { + I2400M_SS_UNINITIALIZED = 1, + I2400M_SS_INIT, + I2400M_SS_READY, + I2400M_SS_SCAN, + I2400M_SS_STANDBY, + I2400M_SS_CONNECTING, + I2400M_SS_WIMAX_CONNECTED, + I2400M_SS_DATA_PATH_CONNECTED, + I2400M_SS_IDLE, + I2400M_SS_DISCONNECTING, + I2400M_SS_OUT_OF_ZONE, + I2400M_SS_SLEEPACTIVE, + I2400M_SS_PRODUCTION, + I2400M_SS_CONFIG, + I2400M_SS_RF_OFF, + I2400M_SS_RF_SHUTDOWN, + I2400M_SS_DEVICE_DISCONNECT, + I2400M_SS_MAX, +}; + + +/** + * i2400m_tlv_system_state - report on the state of the system + * + * @state: see enum i2400m_system_state + */ +struct i2400m_tlv_system_state { + struct i2400m_tlv_hdr hdr; + __le32 state; +} __attribute__((packed)); + + +struct i2400m_tlv_l4_message_versions { + struct i2400m_tlv_hdr hdr; + __le16 major; + __le16 minor; + __le16 branch; + __le16 reserved; +} __attribute__((packed)); + + +struct i2400m_tlv_detailed_device_info { + struct i2400m_tlv_hdr hdr; + __u8 reserved1[400]; + __u8 mac_address[6]; + __u8 reserved2[2]; +} __attribute__((packed)); + + +enum i2400m_rf_switch_status { + I2400M_RF_SWITCH_ON = 1, + I2400M_RF_SWITCH_OFF = 2, +}; + +struct i2400m_tlv_rf_switches_status { + struct i2400m_tlv_hdr hdr; + __u8 sw_rf_switch; /* 1 ON, 2 OFF */ + __u8 hw_rf_switch; /* 1 ON, 2 OFF */ + __u8 reserved[2]; +} __attribute__((packed)); + + +enum { + i2400m_rf_operation_on = 1, + i2400m_rf_operation_off = 2 +}; + +struct i2400m_tlv_rf_operation { + struct i2400m_tlv_hdr hdr; + __le32 status; /* 1 ON, 2 OFF */ +} __attribute__((packed)); + + +enum i2400m_tlv_reset_type { + I2400M_RESET_TYPE_COLD = 1, + I2400M_RESET_TYPE_WARM +}; + +struct i2400m_tlv_device_reset_type { + struct i2400m_tlv_hdr hdr; + __le32 reset_type; +} __attribute__((packed)); + + +struct i2400m_tlv_config_idle_parameters { + struct i2400m_tlv_hdr hdr; + __le32 idle_timeout; /* 100 to 300000 ms [5min], 100 increments + * 0 disabled */ + __le32 idle_paging_interval; /* frames */ +} __attribute__((packed)); + + +enum i2400m_media_status { + I2400M_MEDIA_STATUS_LINK_UP = 1, + I2400M_MEDIA_STATUS_LINK_DOWN, + I2400M_MEDIA_STATUS_LINK_RENEW, +}; + +struct i2400m_tlv_media_status { + struct i2400m_tlv_hdr hdr; + __le32 media_status; +} __attribute__((packed)); + +#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */ diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index ccdc562e444..2dc2eb2b8e2 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -253,7 +253,7 @@ struct ubi_mkvol_req { * * Re-sizing is possible for both dynamic and static volumes. But while dynamic * volumes may be re-sized arbitrarily, static volumes cannot be made to be - * smaller then the number of bytes they bear. To arbitrarily shrink a static + * smaller than the number of bytes they bear. To arbitrarily shrink a static * volume, it must be wiped out first (by means of volume update operation with * zero number of bytes). */ diff --git a/include/net/netdma.h b/include/net/netdma.h index f28c6e064e8..8ba8ce284ee 100644 --- a/include/net/netdma.h +++ b/include/net/netdma.h @@ -24,17 +24,6 @@ #include <linux/dmaengine.h> #include <linux/skbuff.h> -static inline struct dma_chan *get_softnet_dma(void) -{ - struct dma_chan *chan; - rcu_read_lock(); - chan = rcu_dereference(__get_cpu_var(softnet_data).net_dma); - if (chan) - dma_chan_get(chan); - rcu_read_unlock(); - return chan; -} - int dma_skb_copy_datagram_iovec(struct dma_chan* chan, struct sk_buff *skb, int offset, struct iovec *to, size_t len, struct dma_pinned_list *pinned_list); diff --git a/include/net/protocol.h b/include/net/protocol.h index cb2965aa1b6..ffa5b8b1f1d 100644 --- a/include/net/protocol.h +++ b/include/net/protocol.h @@ -59,6 +59,9 @@ struct inet6_protocol int (*gso_send_check)(struct sk_buff *skb); struct sk_buff *(*gso_segment)(struct sk_buff *skb, int features); + struct sk_buff **(*gro_receive)(struct sk_buff **head, + struct sk_buff *skb); + int (*gro_complete)(struct sk_buff *skb); unsigned int flags; /* INET6_PROTO_xxx */ }; diff --git a/include/net/wimax.h b/include/net/wimax.h new file mode 100644 index 00000000000..6b3824edb39 --- /dev/null +++ b/include/net/wimax.h @@ -0,0 +1,523 @@ +/* + * Linux WiMAX + * Kernel space API for accessing WiMAX devices + * + * + * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The WiMAX stack provides an API for controlling and managing the + * system's WiMAX devices. This API affects the control plane; the + * data plane is accessed via the network stack (netdev). + * + * Parts of the WiMAX stack API and notifications are exported to + * user space via Generic Netlink. In user space, libwimax (part of + * the wimax-tools package) provides a shim layer for accessing those + * calls. + * + * The API is standarized for all WiMAX devices and different drivers + * implement the backend support for it. However, device-specific + * messaging pipes are provided that can be used to issue commands and + * receive notifications in free form. + * + * Currently the messaging pipes are the only means of control as it + * is not known (due to the lack of more devices in the market) what + * will be a good abstraction layer. Expect this to change as more + * devices show in the market. This API is designed to be growable in + * order to address this problem. + * + * USAGE + * + * Embed a `struct wimax_dev` at the beginning of the the device's + * private structure, initialize and register it. For details, see + * `struct wimax_dev`s documentation. + * + * Once this is done, wimax-tools's libwimaxll can be used to + * communicate with the driver from user space. You user space + * application does not have to forcibily use libwimaxll and can talk + * the generic netlink protocol directly if desired. + * + * Remember this is a very low level API that will to provide all of + * WiMAX features. Other daemons and services running in user space + * are the expected clients of it. They offer a higher level API that + * applications should use (an example of this is the Intel's WiMAX + * Network Service for the i2400m). + * + * DESIGN + * + * Although not set on final stone, this very basic interface is + * mostly completed. Remember this is meant to grow as new common + * operations are decided upon. New operations will be added to the + * interface, intent being on keeping backwards compatibility as much + * as possible. + * + * This layer implements a set of calls to control a WiMAX device, + * exposing a frontend to the rest of the kernel and user space (via + * generic netlink) and a backend implementation in the driver through + * function pointers. + * + * WiMAX devices have a state, and a kernel-only API allows the + * drivers to manipulate that state. State transitions are atomic, and + * only some of them are allowed (see `enum wimax_st`). + * + * Most API calls will set the state automatically; in most cases + * drivers have to only report state changes due to external + * conditions. + * + * All API operations are 'atomic', serialized thorough a mutex in the + * `struct wimax_dev`. + * + * EXPORTING TO USER SPACE THROUGH GENERIC NETLINK + * + * The API is exported to user space using generic netlink (other + * methods can be added as needed). + * + * There is a Generic Netlink Family named "WiMAX", where interfaces + * supporting the WiMAX interface receive commands and broadcast their + * signals over a multicast group named "msg". + * + * Mapping to the source/destination interface is done by an interface + * index attribute. + * + * For user-to-kernel traffic (commands) we use a function call + * marshalling mechanism, where a message X with attributes A, B, C + * sent from user space to kernel space means executing the WiMAX API + * call wimax_X(A, B, C), sending the results back as a message. + * + * Kernel-to-user (notifications or signals) communication is sent + * over multicast groups. This allows to have multiple applications + * monitoring them. + * + * Each command/signal gets assigned it's own attribute policy. This + * way the validator will verify that all the attributes in there are + * only the ones that should be for each command/signal. Thing of an + * attribute mapping to a type+argumentname for each command/signal. + * + * If we had a single policy for *all* commands/signals, after running + * the validator we'd have to check "does this attribute belong in + * here"? for each one. It can be done manually, but it's just easier + * to have the validator do that job with multiple policies. As well, + * it makes it easier to later expand each command/signal signature + * without affecting others and keeping the namespace more or less + * sane. Not that it is too complicated, but it makes it even easier. + * + * No state information is maintained in the kernel for each user + * space connection (the connection is stateless). + * + * TESTING FOR THE INTERFACE AND VERSIONING + * + * If network interface X is a WiMAX device, there will be a Generic + * Netlink family named "WiMAX X" and the device will present a + * "wimax" directory in it's network sysfs directory + * (/sys/class/net/DEVICE/wimax) [used by HAL]. + * + * The inexistence of any of these means the device does not support + * this WiMAX API. + * + * By querying the generic netlink controller, versioning information + * and the multicast groups available can be found. Applications using + * the interface can either rely on that or use the generic netlink + * controller to figure out which generic netlink commands/signals are + * supported. + * + * NOTE: this versioning is a last resort to avoid hard + * incompatibilities. It is the intention of the design of this + * stack not to introduce backward incompatible changes. + * + * The version code has to fit in one byte (restrictions imposed by + * generic netlink); we use `version / 10` for the major version and + * `version % 10` for the minor. This gives 9 minors for each major + * and 25 majors. + * + * The version change protocol is as follow: + * + * - Major versions: needs to be increased if an existing message/API + * call is changed or removed. Doesn't need to be changed if a new + * message is added. + * + * - Minor version: needs to be increased if new messages/API calls are + * being added or some other consideration that doesn't impact the + * user-kernel interface too much (like some kind of bug fix) and + * that is kind of left up in the air to common sense. + * + * User space code should not try to work if the major version it was + * compiled for differs from what the kernel offers. As well, if the + * minor version of the kernel interface is lower than the one user + * space is expecting (the one it was compiled for), the kernel + * might be missing API calls; user space shall be ready to handle + * said condition. Use the generic netlink controller operations to + * find which ones are supported and which not. + * + * libwimaxll:wimaxll_open() takes care of checking versions. + * + * THE OPERATIONS: + * + * Each operation is defined in its on file (drivers/net/wimax/op-*.c) + * for clarity. The parts needed for an operation are: + * + * - a function pointer in `struct wimax_dev`: optional, as the + * operation might be implemented by the stack and not by the + * driver. + * + * All function pointers are named wimax_dev->op_*(), and drivers + * must implement them except where noted otherwise. + * + * - When exported to user space, a `struct nla_policy` to define the + * attributes of the generic netlink command and a `struct genl_ops` + * to define the operation. + * + * All the declarations for the operation codes (WIMAX_GNL_OP_<NAME>) + * and generic netlink attributes (WIMAX_GNL_<NAME>_*) are declared in + * include/linux/wimax.h; this file is intended to be cloned by user + * space to gain access to those declarations. + * + * A few caveats to remember: + * + * - Need to define attribute numbers starting in 1; otherwise it + * fails. + * + * - the `struct genl_family` requires a maximum attribute id; when + * defining the `struct nla_policy` for each message, it has to have + * an array size of WIMAX_GNL_ATTR_MAX+1. + * + * THE PIPE INTERFACE: + * + * This interface is kept intentionally simple. The driver can send + * and receive free-form messages to/from user space through a + * pipe. See drivers/net/wimax/op-msg.c for details. + * + * The kernel-to-user messages are sent with + * wimax_msg(). user-to-kernel messages are delivered via + * wimax_dev->op_msg_from_user(). + * + * RFKILL: + * + * RFKILL support is built into the wimax_dev layer; the driver just + * needs to call wimax_report_rfkill_{hw,sw}() to inform of changes in + * the hardware or software RF kill switches. When the stack wants to + * turn the radio off, it will call wimax_dev->op_rfkill_sw_toggle(), + * which the driver implements. + * + * User space can set the software RF Kill switch by calling + * wimax_rfkill(). + * + * The code for now only supports devices that don't require polling; + * If the device needs to be polled, create a self-rearming delayed + * work struct for polling or look into adding polled support to the + * WiMAX stack. + * + * When initializing the hardware (_probe), after calling + * wimax_dev_add(), query the device for it's RF Kill switches status + * and feed it back to the WiMAX stack using + * wimax_report_rfkill_{hw,sw}(). If any switch is missing, always + * report it as ON. + * + * NOTE: the wimax stack uses an inverted terminology to that of the + * RFKILL subsystem: + * + * - ON: radio is ON, RFKILL is DISABLED or OFF. + * - OFF: radio is OFF, RFKILL is ENABLED or ON. + * + * MISCELLANEOUS OPS: + * + * wimax_reset() can be used to reset the device to power on state; by + * default it issues a warm reset that maintains the same device + * node. If that is not possible, it falls back to a cold reset + * (device reconnect). The driver implements the backend to this + * through wimax_dev->op_reset(). + */ + +#ifndef __NET__WIMAX_H__ +#define __NET__WIMAX_H__ +#ifdef __KERNEL__ + +#include <linux/wimax.h> +#include <net/genetlink.h> +#include <linux/netdevice.h> + +struct net_device; +struct genl_info; +struct wimax_dev; +struct input_dev; + +/** + * struct wimax_dev - Generic WiMAX device + * + * @net_dev: [fill] Pointer to the &struct net_device this WiMAX + * device implements. + * + * @op_msg_from_user: [fill] Driver-specific operation to + * handle a raw message from user space to the driver. The + * driver can send messages to user space using with + * wimax_msg_to_user(). + * + * @op_rfkill_sw_toggle: [fill] Driver-specific operation to act on + * userspace (or any other agent) requesting the WiMAX device to + * change the RF Kill software switch (WIMAX_RF_ON or + * WIMAX_RF_OFF). + * If such hardware support is not present, it is assumed the + * radio cannot be switched off and it is always on (and the stack + * will error out when trying to switch it off). In such case, + * this function pointer can be left as NULL. + * + * @op_reset: [fill] Driver specific operation to reset the + * device. + * This operation should always attempt first a warm reset that + * does not disconnect the device from the bus and return 0. + * If that fails, it should resort to some sort of cold or bus + * reset (even if it implies a bus disconnection and device + * dissapearance). In that case, -ENODEV should be returned to + * indicate the device is gone. + * This operation has to be synchronous, and return only when the + * reset is complete. In case of having had to resort to bus/cold + * reset implying a device disconnection, the call is allowed to + * return inmediately. + * NOTE: wimax_dev->mutex is NOT locked when this op is being + * called; however, wimax_dev->mutex_reset IS locked to ensure + * serialization of calls to wimax_reset(). + * See wimax_reset()'s documentation. + * + * @name: [fill] A way to identify this device. We need to register a + * name with many subsystems (input for RFKILL, workqueue + * creation, etc). We can't use the network device name as that + * might change and in some instances we don't know it yet (until + * we don't call register_netdev()). So we generate an unique one + * using the driver name and device bus id, place it here and use + * it across the board. Recommended naming: + * DRIVERNAME-BUSNAME:BUSID (dev->bus->name, dev->bus_id). + * + * @id_table_node: [private] link to the list of wimax devices kept by + * id-table.c. Protected by it's own spinlock. + * + * @mutex: [private] Serializes all concurrent access and execution of + * operations. + * + * @mutex_reset: [private] Serializes reset operations. Needs to be a + * different mutex because as part of the reset operation, the + * driver has to call back into the stack to do things such as + * state change, that require wimax_dev->mutex. + * + * @state: [private] Current state of the WiMAX device. + * + * @rfkill: [private] integration into the RF-Kill infrastructure. + * + * @rfkill_input: [private] virtual input device to process the + * hardware RF Kill switches. + * + * @rf_sw: [private] State of the software radio switch (OFF/ON) + * + * @rf_hw: [private] State of the hardware radio switch (OFF/ON) + * + * @debugfs_dentry: [private] Used to hook up a debugfs entry. This + * shows up in the debugfs root as wimax\:DEVICENAME. + * + * Description: + * This structure defines a common interface to access all WiMAX + * devices from different vendors and provides a common API as well as + * a free-form device-specific messaging channel. + * + * Usage: + * 1. Embed a &struct wimax_dev at *the beginning* the network + * device structure so that netdev_priv() points to it. + * + * 2. memset() it to zero + * + * 3. Initialize with wimax_dev_init(). This will leave the WiMAX + * device in the %__WIMAX_ST_NULL state. + * + * 4. Fill all the fields marked with [fill]; once called + * wimax_dev_add(), those fields CANNOT be modified. + * + * 5. Call wimax_dev_add() *after* registering the network + * device. This will leave the WiMAX device in the %WIMAX_ST_DOWN + * state. + * Protect the driver's net_device->open() against succeeding if + * the wimax device state is lower than %WIMAX_ST_DOWN. + * + * 6. Select when the device is going to be turned on/initialized; + * for example, it could be initialized on 'ifconfig up' (when the + * netdev op 'open()' is called on the driver). + * + * When the device is initialized (at `ifconfig up` time, or right + * after calling wimax_dev_add() from _probe(), make sure the + * following steps are taken + * + * a. Move the device to %WIMAX_ST_UNINITIALIZED. This is needed so + * some API calls that shouldn't work until the device is ready + * can be blocked. + * + * b. Initialize the device. Make sure to turn the SW radio switch + * off and move the device to state %WIMAX_ST_RADIO_OFF when + * done. When just initialized, a device should be left in RADIO + * OFF state until user space devices to turn it on. + * + * c. Query the device for the state of the hardware rfkill switch + * and call wimax_rfkill_report_hw() and wimax_rfkill_report_sw() + * as needed. See below. + * + * wimax_dev_rm() undoes before unregistering the network device. Once + * wimax_dev_add() is called, the driver can get called on the + * wimax_dev->op_* function pointers + * + * CONCURRENCY: + * + * The stack provides a mutex for each device that will disallow API + * calls happening concurrently; thus, op calls into the driver + * through the wimax_dev->op*() function pointers will always be + * serialized and *never* concurrent. + * + * For locking, take wimax_dev->mutex is taken; (most) operations in + * the API have to check for wimax_dev_is_ready() to return 0 before + * continuing (this is done internally). + * + * REFERENCE COUNTING: + * + * The WiMAX device is reference counted by the associated network + * device. The only operation that can be used to reference the device + * is wimax_dev_get_by_genl_info(), and the reference it acquires has + * to be released with dev_put(wimax_dev->net_dev). + * + * RFKILL: + * + * At startup, both HW and SW radio switchess are assumed to be off. + * + * At initialization time [after calling wimax_dev_add()], have the + * driver query the device for the status of the software and hardware + * RF kill switches and call wimax_report_rfkill_hw() and + * wimax_rfkill_report_sw() to indicate their state. If any is + * missing, just call it to indicate it is ON (radio always on). + * + * Whenever the driver detects a change in the state of the RF kill + * switches, it should call wimax_report_rfkill_hw() or + * wimax_report_rfkill_sw() to report it to the stack. + */ +struct wimax_dev { + struct net_device *net_dev; + struct list_head id_table_node; + struct mutex mutex; /* Protects all members and API calls */ + struct mutex mutex_reset; + enum wimax_st state; + + int (*op_msg_from_user)(struct wimax_dev *wimax_dev, + const char *, + const void *, size_t, + const struct genl_info *info); + int (*op_rfkill_sw_toggle)(struct wimax_dev *wimax_dev, + enum wimax_rf_state); + int (*op_reset)(struct wimax_dev *wimax_dev); + + struct rfkill *rfkill; + struct input_dev *rfkill_input; + unsigned rf_hw; + unsigned rf_sw; + char name[32]; + + struct dentry *debugfs_dentry; +}; + + + +/* + * WiMAX stack public API for device drivers + * ----------------------------------------- + * + * These functions are not exported to user space. + */ +extern void wimax_dev_init(struct wimax_dev *); +extern int wimax_dev_add(struct wimax_dev *, struct net_device *); +extern void wimax_dev_rm(struct wimax_dev *); + +static inline +struct wimax_dev *net_dev_to_wimax(struct net_device *net_dev) +{ + return netdev_priv(net_dev); +} + +static inline +struct device *wimax_dev_to_dev(struct wimax_dev *wimax_dev) +{ + return wimax_dev->net_dev->dev.parent; +} + +extern void wimax_state_change(struct wimax_dev *, enum wimax_st); +extern enum wimax_st wimax_state_get(struct wimax_dev *); + +/* + * Radio Switch state reporting. + * + * enum wimax_rf_state is declared in linux/wimax.h so the exports + * to user space can use it. + */ +extern void wimax_report_rfkill_hw(struct wimax_dev *, enum wimax_rf_state); +extern void wimax_report_rfkill_sw(struct wimax_dev *, enum wimax_rf_state); + + +/* + * Free-form messaging to/from user space + * + * Sending a message: + * + * wimax_msg(wimax_dev, pipe_name, buf, buf_size, GFP_KERNEL); + * + * Broken up: + * + * skb = wimax_msg_alloc(wimax_dev, pipe_name, buf_size, GFP_KERNEL); + * ...fill up skb... + * wimax_msg_send(wimax_dev, pipe_name, skb); + * + * Be sure not to modify skb->data in the middle (ie: don't use + * skb_push()/skb_pull()/skb_reserve() on the skb). + * + * "pipe_name" is any string, than can be interpreted as the name of + * the pipe or destinatary; the interpretation of it is driver + * specific, so the recipient can multiplex it as wished. It can be + * NULL, it won't be used - an example is using a "diagnostics" tag to + * send diagnostics information that a device-specific diagnostics + * tool would be interested in. + */ +extern struct sk_buff *wimax_msg_alloc(struct wimax_dev *, const char *, + const void *, size_t, gfp_t); +extern int wimax_msg_send(struct wimax_dev *, struct sk_buff *); +extern int wimax_msg(struct wimax_dev *, const char *, + const void *, size_t, gfp_t); + +extern const void *wimax_msg_data_len(struct sk_buff *, size_t *); +extern const void *wimax_msg_data(struct sk_buff *); +extern ssize_t wimax_msg_len(struct sk_buff *); + + +/* + * WiMAX stack user space API + * -------------------------- + * + * This API is what gets exported to user space for general + * operations. As well, they can be called from within the kernel, + * (with a properly referenced `struct wimax_dev`). + * + * Properly referenced means: the 'struct net_device' that embeds the + * device's control structure and (as such) the 'struct wimax_dev' is + * referenced by the caller. + */ +extern int wimax_rfkill(struct wimax_dev *, enum wimax_rf_state); +extern int wimax_reset(struct wimax_dev *); + +#else +/* You might be looking for linux/wimax.h */ +#error This file should not be included from user space. +#endif /* #ifdef __KERNEL__ */ +#endif /* #ifndef __NET__WIMAX_H__ */ diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index 83e32f6d785..9e3182e659d 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -39,6 +39,7 @@ struct iscsi_segment { unsigned int total_copied; struct hash_desc *hash; + unsigned char padbuf[ISCSI_PAD_LEN]; unsigned char recv_digest[ISCSI_DIGEST_SIZE]; unsigned char digest[ISCSI_DIGEST_SIZE]; unsigned int digest_len; diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 6e04e6fe79c..c9184f756ca 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -358,6 +358,7 @@ struct fc_rport { /* aka fc_starget_attrs */ #define FC_RPORT_DEVLOSS_PENDING 0x01 #define FC_RPORT_SCAN_PENDING 0x02 #define FC_RPORT_FAST_FAIL_TIMEDOUT 0x04 +#define FC_RPORT_DEVLOSS_CALLBK_DONE 0x08 #define dev_to_rport(d) \ container_of(d, struct fc_rport, dev) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 4af1083e328..93a4edb148b 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -178,7 +178,7 @@ .private_value = (unsigned long)&xenum } #define SOC_DAPM_VALUE_ENUM(xname, xenum) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ - .info = snd_soc_info_value_enum_double, \ + .info = snd_soc_info_enum_double, \ .get = snd_soc_dapm_get_value_enum_double, \ .put = snd_soc_dapm_put_value_enum_double, \ .private_value = (unsigned long)&xenum } diff --git a/include/sound/soc.h b/include/sound/soc.h index 9b930d34211..24593ac3ea1 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -106,7 +106,7 @@ .private_value = (unsigned long)&xenum } #define SOC_VALUE_ENUM(xname, xenum) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\ - .info = snd_soc_info_value_enum_double, \ + .info = snd_soc_info_enum_double, \ .get = snd_soc_get_value_enum_double, \ .put = snd_soc_put_value_enum_double, \ .private_value = (unsigned long)&xenum } @@ -211,8 +211,6 @@ int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); -int snd_soc_info_value_enum_double(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo); int snd_soc_get_value_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_value_enum_double(struct snd_kcontrol *kcontrol, @@ -419,17 +417,6 @@ struct soc_enum { unsigned char shift_l; unsigned char shift_r; unsigned int max; - const char **texts; - void *dapm; -}; - -/* semi enumerated kcontrol */ -struct soc_value_enum { - unsigned short reg; - unsigned short reg2; - unsigned char shift_l; - unsigned char shift_r; - unsigned int max; unsigned int mask; const char **texts; const unsigned int *values; diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 6369d89c25d..f87f9614844 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -136,8 +136,6 @@ struct xenbus_transaction /* Nil transaction ID. */ #define XBT_NIL ((struct xenbus_transaction) { 0 }) -int __init xenbus_dev_init(void); - char **xenbus_directory(struct xenbus_transaction t, const char *dir, const char *node, unsigned int *num); void *xenbus_read(struct xenbus_transaction t, |