diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ata.h | 112 | ||||
| -rw-r--r-- | include/linux/ide.h | 316 |
2 files changed, 314 insertions, 114 deletions
diff --git a/include/linux/ata.h b/include/linux/ata.h index be00973d1a8..a53318b8cbd 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -30,6 +30,7 @@ #define __LINUX_ATA_H__ #include <linux/types.h> +#include <asm/byteorder.h> /* defines only for the constants which don't work well as enums */ #define ATA_DMA_BOUNDARY 0xffffUL @@ -558,6 +559,15 @@ static inline int ata_id_has_flush(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 12); } +static inline int ata_id_flush_enabled(const u16 *id) +{ + if (ata_id_has_flush(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + return id[ATA_ID_CFS_ENABLE_2] & (1 << 12); +} + static inline int ata_id_has_flush_ext(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) @@ -565,6 +575,19 @@ static inline int ata_id_has_flush_ext(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 13); } +static inline int ata_id_flush_ext_enabled(const u16 *id) +{ + if (ata_id_has_flush_ext(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + /* + * some Maxtor disks have bit 13 defined incorrectly + * so check bit 10 too + */ + return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400; +} + static inline int ata_id_has_lba48(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) @@ -574,6 +597,15 @@ static inline int ata_id_has_lba48(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 10); } +static inline int ata_id_lba48_enabled(const u16 *id) +{ + if (ata_id_has_lba48(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + return id[ATA_ID_CFS_ENABLE_2] & (1 << 10); +} + static inline int ata_id_hpa_enabled(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ @@ -645,7 +677,15 @@ static inline unsigned int ata_id_major_version(const u16 *id) static inline int ata_id_is_sata(const u16 *id) { - return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0; + /* + * See if word 93 is 0 AND drive is at least ATA-5 compatible + * verifying that word 80 by casting it to a signed type -- + * this trick allows us to filter out the reserved values of + * 0x0000 and 0xffff along with the earlier ATA revisions... + */ + if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020) + return 1; + return 0; } static inline int ata_id_has_tpm(const u16 *id) @@ -742,6 +782,76 @@ static inline int atapi_id_dmadir(const u16 *dev_id) return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000); } +/* + * ata_id_is_lba_capacity_ok() performs a sanity check on + * the claimed LBA capacity value for the device. + * + * Returns 1 if LBA capacity looks sensible, 0 otherwise. + * + * It is called only once for each device. + */ +static inline int ata_id_is_lba_capacity_ok(u16 *id) +{ + unsigned long lba_sects, chs_sects, head, tail; + + /* No non-LBA info .. so valid! */ + if (id[ATA_ID_CYLS] == 0) + return 1; + + lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY); + + /* + * The ATA spec tells large drives to return + * C/H/S = 16383/16/63 independent of their size. + * Some drives can be jumpered to use 15 heads instead of 16. + * Some drives can be jumpered to use 4092 cyls instead of 16383. + */ + if ((id[ATA_ID_CYLS] == 16383 || + (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) && + id[ATA_ID_SECTORS] == 63 && + (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) && + (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS])) + return 1; + + chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS]; + + /* perform a rough sanity check on lba_sects: within 10% is OK */ + if (lba_sects - chs_sects < chs_sects/10) + return 1; + + /* some drives have the word order reversed */ + head = (lba_sects >> 16) & 0xffff; + tail = lba_sects & 0xffff; + lba_sects = head | (tail << 16); + + if (lba_sects - chs_sects < chs_sects/10) { + *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects); + return 1; /* LBA capacity is (now) good */ + } + + return 0; /* LBA capacity value may be bad */ +} + +static inline void ata_id_to_hd_driveid(u16 *id) +{ +#ifdef __BIG_ENDIAN + /* accessed in struct hd_driveid as 8-bit values */ + id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]); + id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]); + id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]); + id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]); + id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]); + + /* as 32-bit values */ + *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY); + *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG); + + /* as 64-bit value */ + *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] = + ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); +#endif +} + static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || diff --git a/include/linux/ide.h b/include/linux/ide.h index 6514db8fd2e..a9d82d6e6bd 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -8,7 +8,7 @@ #include <linux/init.h> #include <linux/ioport.h> -#include <linux/hdreg.h> +#include <linux/ata.h> #include <linux/blkdev.h> #include <linux/proc_fs.h> #include <linux/interrupt.h> @@ -17,6 +17,7 @@ #include <linux/device.h> #include <linux/pci.h> #include <linux/completion.h> +#include <linux/pm.h> #ifdef CONFIG_BLK_DEV_IDEACPI #include <acpi/acpi.h> #endif @@ -87,12 +88,13 @@ struct ide_io_ports { }; #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good)) -#define BAD_R_STAT (BUSY_STAT | ERR_STAT) -#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT) -#define BAD_STAT (BAD_R_STAT | DRQ_STAT) -#define DRIVE_READY (READY_STAT | SEEK_STAT) -#define BAD_CRC (ABRT_ERR | ICRC_ERR) +#define BAD_R_STAT (ATA_BUSY | ATA_ERR) +#define BAD_W_STAT (BAD_R_STAT | ATA_DF) +#define BAD_STAT (BAD_R_STAT | ATA_DRQ) +#define DRIVE_READY (ATA_DRDY | ATA_DSC) + +#define BAD_CRC (ATA_ABORTED | ATA_ICRC) #define SATA_NR_PORTS (3) /* 16 possible ?? */ @@ -125,24 +127,41 @@ struct ide_io_ports { #define PARTN_BITS 6 /* number of minor dev bits for partitions */ #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */ #define SECTOR_SIZE 512 -#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */ + #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t))) /* * Timeouts for various operations: */ -#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */ -#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */ -#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */ -#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */ -#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ -#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ +enum { + /* spec allows up to 20ms */ + WAIT_DRQ = HZ / 10, /* 100ms */ + /* some laptops are very slow */ + WAIT_READY = 5 * HZ, /* 5s */ + /* should be less than 3ms (?), if all ATAPI CD is closed at boot */ + WAIT_PIDENTIFY = 10 * HZ, /* 10s */ + /* worst case when spinning up */ + WAIT_WORSTCASE = 30 * HZ, /* 30s */ + /* maximum wait for an IRQ to happen */ + WAIT_CMD = 10 * HZ, /* 10s */ + /* Some drives require a longer IRQ timeout. */ + WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */ + /* + * Some drives (for example, Seagate STT3401A Travan) require a very + * long timeout, because they don't return an interrupt or clear their + * BSY bit until after the command completes (even retension commands). + */ + WAIT_TAPE_CMD = 900 * HZ, /* 900s */ + /* minimum sleep time */ + WAIT_MIN_SLEEP = HZ / 50, /* 20ms */ +}; /* * Op codes for special requests to be handled by ide_special_rq(). * Values should be in the range of 0x20 to 0x3f. */ #define REQ_DRIVE_RESET 0x20 +#define REQ_DEVSET_EXEC 0x21 /* * Check for an interrupt and acknowledge the interrupt status @@ -303,8 +322,8 @@ typedef enum { ide_started, /* a drive operation was started, handler was set */ } ide_startstop_t; +struct ide_devset; struct ide_driver_s; -struct ide_settings_s; #ifdef CONFIG_BLK_DEV_IDEACPI struct ide_acpi_drive_link; @@ -315,10 +334,10 @@ struct ide_acpi_hwif_link; enum { IDE_AFLAG_DRQ_INTERRUPT = (1 << 0), IDE_AFLAG_MEDIA_CHANGED = (1 << 1), - - /* ide-cd */ /* Drive cannot lock the door. */ IDE_AFLAG_NO_DOORLOCK = (1 << 2), + + /* ide-cd */ /* Drive cannot eject the disc. */ IDE_AFLAG_NO_EJECT = (1 << 3), /* Drive is a pre ATAPI 1.2 drive. */ @@ -354,21 +373,25 @@ enum { IDE_AFLAG_CLIK_DRIVE = (1 << 19), /* Requires BH algorithm for packets */ IDE_AFLAG_ZIP_DRIVE = (1 << 20), + /* Write protect */ + IDE_AFLAG_WP = (1 << 21), + /* Supports format progress report */ + IDE_AFLAG_SRFP = (1 << 22), /* ide-tape */ - IDE_AFLAG_IGNORE_DSC = (1 << 21), + IDE_AFLAG_IGNORE_DSC = (1 << 23), /* 0 When the tape position is unknown */ - IDE_AFLAG_ADDRESS_VALID = (1 << 22), + IDE_AFLAG_ADDRESS_VALID = (1 << 24), /* Device already opened */ - IDE_AFLAG_BUSY = (1 << 23), + IDE_AFLAG_BUSY = (1 << 25), /* Attempt to auto-detect the current user block size */ - IDE_AFLAG_DETECT_BS = (1 << 24), + IDE_AFLAG_DETECT_BS = (1 << 26), /* Currently on a filemark */ - IDE_AFLAG_FILEMARK = (1 << 25), + IDE_AFLAG_FILEMARK = (1 << 27), /* 0 = no tape is loaded, so we don't rewind after ejecting */ - IDE_AFLAG_MEDIUM_PRESENT = (1 << 26), + IDE_AFLAG_MEDIUM_PRESENT = (1 << 28), - IDE_AFLAG_NO_AUTOCLOSE = (1 << 27), + IDE_AFLAG_NO_AUTOCLOSE = (1 << 29), }; struct ide_drive_s { @@ -380,10 +403,10 @@ struct ide_drive_s { struct request *rq; /* current request */ struct ide_drive_s *next; /* circular list of hwgroup drives */ void *driver_data; /* extra driver data */ - struct hd_driveid *id; /* drive model identification info */ + u16 *id; /* identification info */ #ifdef CONFIG_IDE_PROC_FS struct proc_dir_entry *proc; /* /proc/ide/ directory entry */ - struct ide_settings_s *settings;/* /proc/ide/ drive settings */ + const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */ #endif struct hwif_s *hwif; /* actually (ide_hwif_t *) */ @@ -395,16 +418,16 @@ struct ide_drive_s { special_t special; /* special action flags */ select_t select; /* basic drive/head select reg value */ - u8 keep_settings; /* restore settings after drive reset */ - u8 using_dma; /* disk is using dma for read/write */ u8 retry_pio; /* retrying dma capable host in pio */ u8 state; /* retry state */ u8 waiting_for_dma; /* dma currently in progress */ - u8 unmask; /* okay to unmask other irqs */ - u8 noflush; /* don't attempt flushes */ - u8 dsc_overlap; /* DSC overlap */ - u8 nice1; /* give potential excess bandwidth */ + unsigned keep_settings : 1; /* restore settings after drive reset */ + unsigned using_dma : 1; /* disk is using dma for read/write */ + unsigned unmask : 1; /* okay to unmask other irqs */ + unsigned noflush : 1; /* don't attempt flushes */ + unsigned dsc_overlap : 1; /* DSC overlap */ + unsigned nice1 : 1; /* give potential excess bandwidth */ unsigned present : 1; /* drive is physically present */ unsigned dead : 1; /* device ejected hint */ unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */ @@ -414,23 +437,22 @@ struct ide_drive_s { unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */ unsigned no_unmask : 1; /* disallow setting unmask bit */ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ - unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ unsigned nodma : 1; /* disallow DMA */ - unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */ unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */ unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */ unsigned sleeping : 1; /* 1=sleeping & sleep field valid */ unsigned post_reset : 1; unsigned udma33_warned : 1; + unsigned addressing : 2; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */ + unsigned wcache : 1; /* status of write cache */ + unsigned nowerr : 1; /* used for ignoring ATA_DF */ - u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */ u8 quirk_list; /* considered quirky, set for a specific host */ u8 init_speed; /* transfer rate set at boot */ u8 current_speed; /* current transfer rate set */ u8 desired_speed; /* desired transfer rate set */ u8 dn; /* now wide spread use */ - u8 wcache; /* status of write cache */ u8 acoustic; /* acoustic management */ u8 media; /* disk, cdrom, tape, floppy, ... */ u8 ready_stat; /* min status value for drive ready */ @@ -438,9 +460,7 @@ struct ide_drive_s { u8 mult_req; /* requested multiple sector setting */ u8 tune_req; /* requested drive tuning setting */ u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ - u8 bad_wstat; /* used for ignoring WRERR_STAT */ - u8 nowerr; /* used for ignoring WRERR_STAT */ - u8 sect0; /* offset of first sector for DM6:DDO */ + u8 bad_wstat; /* used for ignoring ATA_DF */ u8 head; /* "real" number of heads */ u8 sect; /* "real" sectors per track */ u8 bios_head; /* BIOS/fdisk/LILO number of heads */ @@ -474,10 +494,6 @@ typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev) -#define IDE_CHIPSET_PCI_MASK \ - ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx)) -#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1) - struct ide_task_s; struct ide_port_info; @@ -567,7 +583,6 @@ typedef struct hwif_s { u8 major; /* our major number */ u8 index; /* 0 for ide0; 1 for ide1; ... */ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */ - u8 bus_state; /* power state of the IDE bus */ u32 host_flags; @@ -645,6 +660,7 @@ struct ide_host { ide_hwif_t *ports[MAX_HWIFS]; unsigned int n_ports; struct device *dev[2]; + unsigned int (*init_chipset)(struct pci_dev *); unsigned long host_flags; void *host_priv; }; @@ -692,9 +708,61 @@ typedef struct ide_driver_s ide_driver_t; extern struct mutex ide_setting_mtx; -int set_io_32bit(ide_drive_t *, int); -int set_pio_mode(ide_drive_t *, int); -int set_using_dma(ide_drive_t *, int); +/* + * configurable drive settings + */ + +#define DS_SYNC (1 << 0) + +struct ide_devset { + int (*get)(ide_drive_t *); + int (*set)(ide_drive_t *, int); + unsigned int flags; +}; + +#define __DEVSET(_flags, _get, _set) { \ + .flags = _flags, \ + .get = _get, \ + .set = _set, \ +} + +#define ide_devset_get(name, field) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + return drive->field; \ +} + +#define ide_devset_set(name, field) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + drive->field = arg; \ + return 0; \ +} + +#define __IDE_DEVSET(_name, _flags, _get, _set) \ +const struct ide_devset ide_devset_##_name = \ + __DEVSET(_flags, _get, _set) + +#define IDE_DEVSET(_name, _flags, _get, _set) \ +static __IDE_DEVSET(_name, _flags, _get, _set) + +#define ide_devset_rw(_name, _func) \ +IDE_DEVSET(_name, 0, get_##_func, set_##_func) + +#define ide_devset_w(_name, _func) \ +IDE_DEVSET(_name, 0, NULL, set_##_func) + +#define ide_devset_rw_sync(_name, _func) \ +IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func) + +#define ide_decl_devset(_name) \ +extern const struct ide_devset ide_devset_##_name + +ide_decl_devset(io_32bit); +ide_decl_devset(keepsettings); +ide_decl_devset(pio_mode); +ide_decl_devset(unmaskirq); +ide_decl_devset(using_dma); /* ATAPI packet command flags */ enum { @@ -710,6 +778,12 @@ enum { PC_FLAG_TIMEDOUT = (1 << 7), }; +/* + * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes. + * This is used for several packet commands (not for READ/WRITE commands). + */ +#define IDE_PC_BUFFER_SIZE 256 + struct ide_atapi_pc { /* actual packet bytes */ u8 c[12]; @@ -739,7 +813,7 @@ struct ide_atapi_pc { * those are more or less driver-specific and some of them are subject * to change/removal later. */ - u8 pc_buf[256]; + u8 pc_buf[IDE_PC_BUFFER_SIZE]; /* idetape only */ struct idetape_bh *bh; @@ -757,37 +831,34 @@ struct ide_atapi_pc { #ifdef CONFIG_IDE_PROC_FS /* - * configurable drive settings + * /proc/ide interface */ -#define TYPE_INT 0 -#define TYPE_BYTE 1 -#define TYPE_SHORT 2 +#define ide_devset_rw_field(_name, _field) \ +ide_devset_get(_name, _field); \ +ide_devset_set(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) + +struct ide_proc_devset { + const char *name; + const struct ide_devset *setting; + int min, max; + int (*mulf)(ide_drive_t *); + int (*divf)(ide_drive_t *); +}; -#define SETTING_READ (1 << 0) -#define SETTING_WRITE (1 << 1) -#define SETTING_RW (SETTING_READ | SETTING_WRITE) +#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \ + .name = __stringify(_name), \ + .setting = &ide_devset_##_name, \ + .min = _min, \ + .max = _max, \ + .mulf = _mulf, \ + .divf = _divf, \ +} -typedef int (ide_procset_t)(ide_drive_t *, int); -typedef struct ide_settings_s { - char *name; - int rw; - int data_type; - int min; - int max; - int mul_factor; - int div_factor; - void *data; - ide_procset_t *set; - int auto_remove; - struct ide_settings_s *next; -} ide_settings_t; - -int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set); +#define IDE_PROC_DEVSET(_name, _min, _max) \ +__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL) -/* - * /proc/ide interface - */ typedef struct { const char *name; mode_t mode; @@ -804,8 +875,6 @@ void ide_proc_unregister_port(ide_hwif_t *); void ide_proc_register_driver(ide_drive_t *, ide_driver_t *); void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *); -void ide_add_generic_settings(ide_drive_t *); - read_proc_t proc_ide_read_capacity; read_proc_t proc_ide_read_geometry; @@ -833,7 +902,6 @@ static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; } static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } -static inline void ide_add_generic_settings(ide_drive_t *drive) { ; } #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0; #endif @@ -879,7 +947,6 @@ enum { struct ide_driver_s { const char *version; u8 media; - unsigned supports_dsc_overlap : 1; ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t); int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); @@ -889,7 +956,8 @@ struct ide_driver_s { void (*resume)(ide_drive_t *); void (*shutdown)(ide_drive_t *); #ifdef CONFIG_IDE_PROC_FS - ide_proc_entry_t *proc; + ide_proc_entry_t *proc; + const struct ide_proc_devset *settings; #endif }; @@ -898,7 +966,17 @@ struct ide_driver_s { int ide_device_get(ide_drive_t *); void ide_device_put(ide_drive_t *); -int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long); +struct ide_ioctl_devset { + unsigned int get_ioctl; + unsigned int set_ioctl; + const struct ide_devset *setting; +}; + +int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int, + unsigned long, const struct ide_ioctl_devset *); + +int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, + unsigned, unsigned long); extern int ide_vlb_clk; extern int ide_pci_clk; @@ -920,14 +998,19 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8); ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat); -extern void ide_fix_driveid(struct hd_driveid *); +void ide_fix_driveid(u16 *); extern void ide_fixstring(u8 *, const int, const int); +int ide_busy_sleep(ide_hwif_t *, unsigned long, int); + int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); extern ide_startstop_t ide_do_reset (ide_drive_t *); +extern int ide_devset_execute(ide_drive_t *drive, + const struct ide_devset *setting, int arg); + extern void ide_do_drive_cmd(ide_drive_t *, struct request *); extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); @@ -1051,6 +1134,8 @@ void ide_tf_read(ide_drive_t *, ide_task_t *); void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int); void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int); +int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int); + extern void SELECT_DRIVE(ide_drive_t *); void SELECT_MASK(ide_drive_t *, int); @@ -1061,11 +1146,36 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +int ide_check_atapi_device(ide_drive_t *, const char *); + +void ide_init_pc(struct ide_atapi_pc *); + +/* + * Special requests for ide-tape block device strategy routine. + * + * In order to service a character device command, we add special requests to + * the tail of our block device request queue and wait for their completion. + */ +enum { + REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */ + REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */ + REQ_IDETAPE_READ = (1 << 2), + REQ_IDETAPE_WRITE = (1 << 3), +}; + +void ide_queue_pc_head(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *, + struct request *); +int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *); + +int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); +int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); +int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); + ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), - void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int, + int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int)); ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, ide_handler_t *, unsigned int, ide_expiry_t *); @@ -1080,8 +1190,6 @@ int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16); int ide_no_data_taskfile(ide_drive_t *, ide_task_t *); int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); -int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long); -int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); extern int ide_driveid_update(ide_drive_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); @@ -1092,7 +1200,6 @@ extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout); extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout); -extern int ide_spin_wait_hwgroup(ide_drive_t *); extern void ide_timer_expiry(unsigned long); extern irqreturn_t ide_intr(int irq, void *dev_id); extern void do_ide_request(struct request_queue *); @@ -1229,6 +1336,14 @@ int ide_pci_init_two(struct pci_dev *, struct pci_dev *, const struct ide_port_info *, void *); void ide_pci_remove(struct pci_dev *); +#ifdef CONFIG_PM +int ide_pci_suspend(struct pci_dev *, pm_message_t); +int ide_pci_resume(struct pci_dev *); +#else +#define ide_pci_suspend NULL +#define ide_pci_resume NULL +#endif + void ide_map_sg(ide_drive_t *, struct request *); void ide_init_sg_cmd(ide_drive_t *, struct request *); @@ -1240,7 +1355,7 @@ struct drive_list_entry { const char *id_firmware; }; -int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); +int ide_in_drive_list(u16 *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int __ide_dma_bad_drive(ide_drive_t *); @@ -1347,24 +1462,6 @@ const char *ide_xfer_verbose(u8 mode); extern void ide_toggle_bounce(ide_drive_t *drive, int on); extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); -static inline int ide_dev_has_iordy(struct hd_driveid *id) -{ - return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0; -} - -static inline int ide_dev_is_sata(struct hd_driveid *id) -{ - /* - * See if word 93 is 0 AND drive is at least ATA-5 compatible - * verifying that word 80 by casting it to a signed type -- - * this trick allows us to filter out the reserved values of - * 0x0000 and 0xffff along with the earlier ATA revisions... - */ - if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020) - return 1; - return 0; -} - u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); @@ -1436,13 +1533,6 @@ extern struct mutex ide_cfg_mtx; extern struct bus_type ide_bus_type; extern struct class *ide_port_class; -/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */ -#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000) - -/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */ -#define ide_id_has_flush_cache_ext(id) \ - (((id)->cfs_enable_2 & 0x2400) == 0x2400) - static inline void ide_dump_identify(u8 *id) { print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0); @@ -1453,10 +1543,10 @@ static inline int hwif_to_node(ide_hwif_t *hwif) return hwif->dev ? dev_to_node(hwif->dev) : -1; } -static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) +static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); + ide_drive_t *peer = &drive->hwif->drives[(drive->dn ^ 1) & 1]; - return &hwif->drives[(drive->dn ^ 1) & 1]; + return peer->present ? peer : NULL; } #endif /* _IDE_H */ |