summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/usb.h25
-rw-r--r--include/linux/usb/audio.h287
-rw-r--r--include/linux/usb/ch9.h8
-rw-r--r--include/linux/usb/ehci_def.h35
-rw-r--r--include/linux/usb/isp1362.h46
-rw-r--r--include/linux/usb/isp1760.h18
-rw-r--r--include/linux/usb/serial.h2
-rw-r--r--include/linux/usbdevice_fs.h3
8 files changed, 265 insertions, 159 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 19fabc487be..a34fa89f147 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -195,7 +195,7 @@ struct usb_interface {
struct device dev; /* interface specific device info */
struct device *usb_dev;
- int pm_usage_cnt; /* usage counter for autosuspend */
+ atomic_t pm_usage_cnt; /* usage counter for autosuspend */
struct work_struct reset_ws; /* for resets in atomic context */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
@@ -551,13 +551,13 @@ extern void usb_autopm_put_interface_async(struct usb_interface *intf);
static inline void usb_autopm_enable(struct usb_interface *intf)
{
- intf->pm_usage_cnt = 0;
+ atomic_set(&intf->pm_usage_cnt, 0);
usb_autopm_set_interface(intf);
}
static inline void usb_autopm_disable(struct usb_interface *intf)
{
- intf->pm_usage_cnt = 1;
+ atomic_set(&intf->pm_usage_cnt, 1);
usb_autopm_set_interface(intf);
}
@@ -1036,9 +1036,10 @@ typedef void (*usb_complete_t)(struct urb *);
* @transfer_flags: A variety of flags may be used to affect how URB
* submission, unlinking, or operation are handled. Different
* kinds of URB can use different flags.
- * @transfer_buffer: This identifies the buffer to (or from) which
- * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- * is set). This buffer must be suitable for DMA; allocate it with
+ * @transfer_buffer: This identifies the buffer to (or from) which the I/O
+ * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
+ * (however, do not leave garbage in transfer_buffer even then).
+ * This buffer must be suitable for DMA; allocate it with
* kmalloc() or equivalent. For transfers to "in" endpoints, contents
* of this buffer will be modified. This buffer is used for the data
* stage of control transfers.
@@ -1104,9 +1105,15 @@ typedef void (*usb_complete_t)(struct urb *);
* allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
* When these transfer flags are provided, host controller drivers will
* attempt to use the dma addresses found in the transfer_dma and/or
- * setup_dma fields rather than determining a dma address themselves. (Note
- * that transfer_buffer and setup_packet must still be set because not all
- * host controllers use DMA, nor do virtual root hubs).
+ * setup_dma fields rather than determining a dma address themselves.
+ *
+ * Note that transfer_buffer must still be set if the controller
+ * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * to root hub. If you have to trasfer between highmem zone and the device
+ * on such controller, create a bounce buffer or bail out with an error.
+ * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
+ * capable, assign NULL to it, so that usbmon knows not to use the value.
+ * The setup_packet must always be set, so it cannot be located in highmem.
*
* Initialization:
*
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index b5744bc218a..eaf9dffe0a0 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -24,88 +24,78 @@
#define USB_SUBCLASS_AUDIOCONTROL 0x01
#define USB_SUBCLASS_AUDIOSTREAMING 0x02
#define USB_SUBCLASS_MIDISTREAMING 0x03
-#define USB_SUBCLASS_VENDOR_SPEC 0xff
-
-/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/
-#define HEADER 0x01
-#define INPUT_TERMINAL 0x02
-#define OUTPUT_TERMINAL 0x03
-#define MIXER_UNIT 0x04
-#define SELECTOR_UNIT 0x05
-#define FEATURE_UNIT 0x06
-#define PROCESSING_UNIT 0x07
-#define EXTENSION_UNIT 0x08
-
-#define AS_GENERAL 0x01
-#define FORMAT_TYPE 0x02
-#define FORMAT_SPECIFIC 0x03
-
-#define EP_GENERAL 0x01
-
-#define MS_GENERAL 0x01
-#define MIDI_IN_JACK 0x02
-#define MIDI_OUT_JACK 0x03
-
-/* endpoint attributes */
-#define EP_ATTR_MASK 0x0c
-#define EP_ATTR_ASYNC 0x04
-#define EP_ATTR_ADAPTIVE 0x08
-#define EP_ATTR_SYNC 0x0c
-
-/* cs endpoint attributes */
-#define EP_CS_ATTR_SAMPLE_RATE 0x01
-#define EP_CS_ATTR_PITCH_CONTROL 0x02
-#define EP_CS_ATTR_FILL_MAX 0x80
-
-/* Audio Class specific Request Codes */
-#define USB_AUDIO_SET_INTF 0x21
-#define USB_AUDIO_SET_ENDPOINT 0x22
-#define USB_AUDIO_GET_INTF 0xa1
-#define USB_AUDIO_GET_ENDPOINT 0xa2
-
-#define SET_ 0x00
-#define GET_ 0x80
-
-#define _CUR 0x1
-#define _MIN 0x2
-#define _MAX 0x3
-#define _RES 0x4
-#define _MEM 0x5
-
-#define SET_CUR (SET_ | _CUR)
-#define GET_CUR (GET_ | _CUR)
-#define SET_MIN (SET_ | _MIN)
-#define GET_MIN (GET_ | _MIN)
-#define SET_MAX (SET_ | _MAX)
-#define GET_MAX (GET_ | _MAX)
-#define SET_RES (SET_ | _RES)
-#define GET_RES (GET_ | _RES)
-#define SET_MEM (SET_ | _MEM)
-#define GET_MEM (GET_ | _MEM)
-
-#define GET_STAT 0xff
-
-#define USB_AC_TERMINAL_UNDEFINED 0x100
-#define USB_AC_TERMINAL_STREAMING 0x101
-#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF
+
+/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
+#define UAC_HEADER 0x01
+#define UAC_INPUT_TERMINAL 0x02
+#define UAC_OUTPUT_TERMINAL 0x03
+#define UAC_MIXER_UNIT 0x04
+#define UAC_SELECTOR_UNIT 0x05
+#define UAC_FEATURE_UNIT 0x06
+#define UAC_PROCESSING_UNIT 0x07
+#define UAC_EXTENSION_UNIT 0x08
+
+/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
+#define UAC_AS_GENERAL 0x01
+#define UAC_FORMAT_TYPE 0x02
+#define UAC_FORMAT_SPECIFIC 0x03
+
+/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_EP_GENERAL 0x01
+
+/* A.9 Audio Class-Specific Request Codes */
+#define UAC_SET_ 0x00
+#define UAC_GET_ 0x80
+
+#define UAC__CUR 0x1
+#define UAC__MIN 0x2
+#define UAC__MAX 0x3
+#define UAC__RES 0x4
+#define UAC__MEM 0x5
+
+#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
+#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
+#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
+#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
+#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
+#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
+#define UAC_SET_RES (UAC_SET_ | UAC__RES)
+#define UAC_GET_RES (UAC_GET_ | UAC__RES)
+#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
+#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
+
+#define UAC_GET_STAT 0xff
+
+/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define UAC_MS_HEADER 0x01
+#define UAC_MIDI_IN_JACK 0x02
+#define UAC_MIDI_OUT_JACK 0x03
+
+/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_MS_GENERAL 0x01
+
+/* Terminals - 2.1 USB Terminal Types */
+#define UAC_TERMINAL_UNDEFINED 0x100
+#define UAC_TERMINAL_STREAMING 0x101
+#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
/* Terminal Control Selectors */
/* 4.3.2 Class-Specific AC Interface Descriptor */
-struct usb_ac_header_descriptor {
+struct uac_ac_header_descriptor {
__u8 bLength; /* 8 + n */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* USB_MS_HEADER */
+ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
__le16 bcdADC; /* 0x0100 */
__le16 wTotalLength; /* includes Unit and Terminal desc. */
__u8 bInCollection; /* n */
__u8 baInterfaceNr[]; /* [n] */
} __attribute__ ((packed));
-#define USB_DT_AC_HEADER_SIZE(n) (8 + (n))
+#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \
-struct usb_ac_header_descriptor_##n { \
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
+struct uac_ac_header_descriptor_##n { \
__u8 bLength; \
__u8 bDescriptorType; \
__u8 bDescriptorSubtype; \
@@ -116,7 +106,7 @@ struct usb_ac_header_descriptor_##n { \
} __attribute__ ((packed))
/* 4.3.2.1 Input Terminal Descriptor */
-struct usb_input_terminal_descriptor {
+struct uac_input_terminal_descriptor {
__u8 bLength; /* in bytes: 12 */
__u8 bDescriptorType; /* CS_INTERFACE descriptor type */
__u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
@@ -129,18 +119,19 @@ struct usb_input_terminal_descriptor {
__u8 iTerminal;
} __attribute__ ((packed));
-#define USB_DT_AC_INPUT_TERMINAL_SIZE 12
+#define UAC_DT_INPUT_TERMINAL_SIZE 12
-#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200
-#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201
-#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
-#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
-#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
-#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
-#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+/* Terminals - 2.2 Input Terminal Types */
+#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
+#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
+#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
/* 4.3.2.2 Output Terminal Descriptor */
-struct usb_output_terminal_descriptor {
+struct uac_output_terminal_descriptor {
__u8 bLength; /* in bytes: 9 */
__u8 bDescriptorType; /* CS_INTERFACE descriptor type */
__u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
@@ -151,23 +142,24 @@ struct usb_output_terminal_descriptor {
__u8 iTerminal;
} __attribute__ ((packed));
-#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9
+#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
-#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300
-#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301
-#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302
-#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
-#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
-#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
-#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
-#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+/* Terminals - 2.3 Output Terminal Types */
+#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
/* Set bControlSize = 2 as default setting */
-#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \
-struct usb_ac_feature_unit_descriptor_##ch { \
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct uac_feature_unit_descriptor_##ch { \
__u8 bLength; \
__u8 bDescriptorType; \
__u8 bDescriptorSubtype; \
@@ -179,7 +171,7 @@ struct usb_ac_feature_unit_descriptor_##ch { \
} __attribute__ ((packed))
/* 4.5.2 Class-Specific AS Interface Descriptor */
-struct usb_as_header_descriptor {
+struct uac_as_header_descriptor {
__u8 bLength; /* in bytes: 7 */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* AS_GENERAL */
@@ -188,16 +180,17 @@ struct usb_as_header_descriptor {
__le16 wFormatTag; /* The Audio Data Format */
} __attribute__ ((packed));
-#define USB_DT_AS_HEADER_SIZE 7
+#define UAC_DT_AS_HEADER_SIZE 7
-#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0
-#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1
-#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2
-#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3
-#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4
-#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5
+/* Formats - A.1.1 Audio Data Format Type I Codes */
+#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I_PCM 0x1
+#define UAC_FORMAT_TYPE_I_PCM8 0x2
+#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define UAC_FORMAT_TYPE_I_ALAW 0x4
+#define UAC_FORMAT_TYPE_I_MULAW 0x5
-struct usb_as_format_type_i_continuous_descriptor {
+struct uac_format_type_i_continuous_descriptor {
__u8 bLength; /* in bytes: 8 + (ns * 3) */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* FORMAT_TYPE */
@@ -210,9 +203,9 @@ struct usb_as_format_type_i_continuous_descriptor {
__u8 tUpperSamFreq[3];
} __attribute__ ((packed));
-#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
-struct usb_as_formate_type_i_discrete_descriptor {
+struct uac_format_type_i_discrete_descriptor {
__u8 bLength; /* in bytes: 8 + (ns * 3) */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* FORMAT_TYPE */
@@ -224,8 +217,8 @@ struct usb_as_formate_type_i_discrete_descriptor {
__u8 tSamFreq[][3];
} __attribute__ ((packed));
-#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \
-struct usb_as_formate_type_i_discrete_descriptor_##n { \
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct uac_format_type_i_discrete_descriptor_##n { \
__u8 bLength; \
__u8 bDescriptorType; \
__u8 bDescriptorSubtype; \
@@ -237,18 +230,15 @@ struct usb_as_formate_type_i_discrete_descriptor_##n { \
__u8 tSamFreq[n][3]; \
} __attribute__ ((packed))
-#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
-
-#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0
-#define USB_AS_FORMAT_TYPE_I 0x1
-#define USB_AS_FORMAT_TYPE_II 0x2
-#define USB_AS_FORMAT_TYPE_III 0x3
+#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
-#define USB_AS_ENDPOINT_ASYNC (1 << 2)
-#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2)
-#define USB_AS_ENDPOINT_SYNC (3 << 2)
+/* Formats - A.2 Format Type Codes */
+#define UAC_FORMAT_TYPE_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I 0x1
+#define UAC_FORMAT_TYPE_II 0x2
+#define UAC_FORMAT_TYPE_III 0x3
-struct usb_as_iso_endpoint_descriptor {
+struct uac_iso_endpoint_descriptor {
__u8 bLength; /* in bytes: 7 */
__u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
__u8 bDescriptorSubtype; /* EP_GENERAL */
@@ -256,30 +246,37 @@ struct usb_as_iso_endpoint_descriptor {
__u8 bLockDelayUnits;
__le16 wLockDelay;
};
-#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7
-
-#define FU_CONTROL_UNDEFINED 0x00
-#define MUTE_CONTROL 0x01
-#define VOLUME_CONTROL 0x02
-#define BASS_CONTROL 0x03
-#define MID_CONTROL 0x04
-#define TREBLE_CONTROL 0x05
-#define GRAPHIC_EQUALIZER_CONTROL 0x06
-#define AUTOMATIC_GAIN_CONTROL 0x07
-#define DELAY_CONTROL 0x08
-#define BASS_BOOST_CONTROL 0x09
-#define LOUDNESS_CONTROL 0x0a
-
-#define FU_MUTE (1 << (MUTE_CONTROL - 1))
-#define FU_VOLUME (1 << (VOLUME_CONTROL - 1))
-#define FU_BASS (1 << (BASS_CONTROL - 1))
-#define FU_MID (1 << (MID_CONTROL - 1))
-#define FU_TREBLE (1 << (TREBLE_CONTROL - 1))
-#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1))
-#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1))
-#define FU_DELAY (1 << (DELAY_CONTROL - 1))
-#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1))
-#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1))
+#define UAC_ISO_ENDPOINT_DESC_SIZE 7
+
+#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
+#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
+#define UAC_EP_CS_ATTR_FILL_MAX 0x80
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_CONTROL_UNDEFINED 0x00
+#define UAC_MUTE_CONTROL 0x01
+#define UAC_VOLUME_CONTROL 0x02
+#define UAC_BASS_CONTROL 0x03
+#define UAC_MID_CONTROL 0x04
+#define UAC_TREBLE_CONTROL 0x05
+#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06
+#define UAC_AUTOMATIC_GAIN_CONTROL 0x07
+#define UAC_DELAY_CONTROL 0x08
+#define UAC_BASS_BOOST_CONTROL 0x09
+#define UAC_LOUDNESS_CONTROL 0x0a
+
+#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1))
+#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1))
+#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1))
+#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1))
+#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1))
+#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
+#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
+#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1))
+#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1))
+#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1))
+
+#ifdef __KERNEL__
struct usb_audio_control {
struct list_head list;
@@ -290,18 +287,6 @@ struct usb_audio_control {
int (*get)(struct usb_audio_control *con, u8 cmd);
};
-static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
-{
- con->data[cmd] = value;
-
- return 0;
-}
-
-static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
-{
- return con->data[cmd];
-}
-
struct usb_audio_control_selector {
struct list_head list;
struct list_head control;
@@ -311,4 +296,6 @@ struct usb_audio_control_selector {
struct usb_descriptor_header *desc;
};
+#endif /* __KERNEL__ */
+
#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 93223638f70..94012e649d8 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -258,6 +258,8 @@ struct usb_device_descriptor {
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
/*-------------------------------------------------------------------------*/
/* USB_DT_CONFIG: Configuration descriptor information.
@@ -348,6 +350,12 @@ struct usb_endpoint_descriptor {
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
#define USB_ENDPOINT_DIR_MASK 0x80
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
#define USB_ENDPOINT_XFER_CONTROL 0
#define USB_ENDPOINT_XFER_ISOC 1
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 5b88e36c910..af4b86f3aca 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -105,6 +105,7 @@ struct ehci_regs {
#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
/* 19:16 for port testing */
+#define PORT_TEST_PKT (0x4<<16) /* Port Test Control - packet test */
#define PORT_LED_OFF (0<<14)
#define PORT_LED_AMBER (1<<14)
#define PORT_LED_GREEN (2<<14)
@@ -132,6 +133,19 @@ struct ehci_regs {
#define USBMODE_CM_HC (3<<0) /* host controller mode */
#define USBMODE_CM_IDLE (0<<0) /* idle state */
+/* Moorestown has some non-standard registers, partially due to the fact that
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to
+ * PORTSCx
+ */
+#define HOSTPC0 0x84 /* HOSTPC extension */
+#define HOSTPC_PHCD (1<<22) /* Phy clock disable */
+#define HOSTPC_PSPD (3<<25) /* Port speed detection */
+#define USBMODE_EX 0xc8 /* USB Device mode extension */
+#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
+#define USBMODE_EX_HC (3<<0) /* host controller mode */
+#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
+
/* Appendix C, Debug port ... intended for use with special "debug devices"
* that can help if there's no serial console. (nonstandard enumeration.)
*/
@@ -157,4 +171,25 @@ struct ehci_dbg_port {
#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
} __attribute__ ((packed));
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from ehci host driver to ehci debug driver */
+extern int dbgp_external_startup(void);
+extern int dbgp_reset_prep(void);
+#else
+static inline int dbgp_reset_prep(void)
+{
+ return 1;
+}
+static inline int dbgp_external_startup(void)
+{
+ return -1;
+}
+#endif
+
#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h
new file mode 100644
index 00000000000..642684bb929
--- /dev/null
+++ b/include/linux/usb/isp1362.h
@@ -0,0 +1,46 @@
+/*
+ * board initialization code should put one of these into dev->platform_data
+ * and place the isp1362 onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP1362_H__
+#define __LINUX_USB_ISP1362_H__
+
+struct isp1362_platform_data {
+ /* Enable internal pulldown resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* Clock cannot be stopped */
+ unsigned clknotstop:1;
+ /* On-chip overcurrent protection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* DREQ output polarity */
+ unsigned dreq_act_high:1;
+ /* DACK input polarity */
+ unsigned dack_act_high:1;
+ /* chip can be resumed via H_WAKEUP pin */
+ unsigned remote_wakeup_connected:1;
+ /* Switch or not to switch (keep always powered) */
+ unsigned no_power_switching:1;
+ /* Ganged port power switching (0) or individual port power switching (1) */
+ unsigned power_switching_mode:1;
+ /* Given port_power, msec/2 after power on till power good */
+ u8 potpg;
+ /* Hardware reset set/clear */
+ void (*reset) (struct device *dev, int set);
+ /* Clock start/stop */
+ void (*clock) (struct device *dev, int start);
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 110ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG (registers)
+ * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
+ * WE MUST NOT be activated during these intervals (even without CS!)
+ */
+ void (*delay) (struct device *dev, unsigned int delay);
+};
+
+#endif
diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h
new file mode 100644
index 00000000000..de7de53c553
--- /dev/null
+++ b/include/linux/usb/isp1760.h
@@ -0,0 +1,18 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the isp1760 onto platform_bus named "isp1760-hcd".
+ */
+
+#ifndef __LINUX_USB_ISP1760_H
+#define __LINUX_USB_ISP1760_H
+
+struct isp1760_platform_data {
+ unsigned is_isp1761:1; /* Chip is ISP1761 */
+ unsigned bus_width_16:1; /* 16/32-bit data bus width */
+ unsigned port1_otg:1; /* Port 1 supports OTG */
+ unsigned analog_oc:1; /* Analog overcurrent */
+ unsigned dack_polarity_high:1; /* DACK active high */
+ unsigned dreq_polarity_high:1; /* DREQ active high */
+};
+
+#endif /* __LINUX_USB_ISP1760_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 7b85e327af9..c17eb64d721 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -59,6 +59,7 @@ enum port_dev_state {
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_fifo: kfifo used to buffer outgoing data
* @write_urb_busy: port`s writing status
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
@@ -96,6 +97,7 @@ struct usb_serial_port {
unsigned char *bulk_out_buffer;
int bulk_out_size;
struct urb *write_urb;
+ struct kfifo *write_fifo;
int write_urb_busy;
__u8 bulk_out_endpointAddress;
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 0044d9b4cb8..b2a7d8ba6ee 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -77,6 +77,7 @@ struct usbdevfs_connectinfo {
#define USBDEVFS_URB_SHORT_NOT_OK 0x01
#define USBDEVFS_URB_ISO_ASAP 0x02
+#define USBDEVFS_URB_BULK_CONTINUATION 0x04
#define USBDEVFS_URB_NO_FSBR 0x20
#define USBDEVFS_URB_ZERO_PACKET 0x40
#define USBDEVFS_URB_NO_INTERRUPT 0x80
@@ -175,4 +176,6 @@ struct usbdevfs_ioctl32 {
#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
#define USBDEVFS_DISCONNECT _IO('U', 22)
#define USBDEVFS_CONNECT _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int)
#endif /* _LINUX_USBDEVICE_FS_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-11 16:06:42 +0000